Context Navigation

Changes between Version 2 and Version 3 of Ticket #13048, comment 2

-              v2
+              v3
 Reproduced. EFI support was added in PXELINUX 6.0. This may be a part of the issue.
+I have seen the same behavior in PXELINUX 5.10.
+{{{
+:02:06.976627 iPXE (PCI 00:0D.0) starting execution...ok
+:02:06.976701 iPXE initialising devices...ok
+:02:06.976776
+:02:06.976850
+:02:06.976924
+:02:06.976998 iPXE 1.0.0+ -- Open Source Network Boot Firmware -- http://ipxe.org
+:02:06.977073 Features: DNS TFTP PXE PXEXT Menu
+:02:06.977147
+:02:06.977221 net0: 08:00:27:06:80:40 using pcnet32 on PCI00:03.0 (open)
+:02:06.977296   [Link:up, TX:0 TXE:0 RX:0 RXE:0]
+:02:06.977370 DHCP (net0 08:00:27:06:80:40)...... ok
+:02:06.977444 net0: 10.10.0.98/255.255.255.0
+:02:06.977518 Next server: 10.10.0.20
+:02:06.977593 Filename: lpxelinux.0
+:02:06.977668 tftp://10.10.0.20/lpxelinux.0... ok
+:02:06.977742
+:02:06.977816 PXELINUX 5.10 2013-06-04  Copyright (C) 1994-2013 H. Peter Anvin et al
+:02:06.977901
+:02:06.977988
+:02:06.978062
+:02:06.978137
+:02:06.978211
+:02:06.978285
+:02:06.978359
+:02:06.978434
+:02:06.978508 --------------------------------------------------------------------------------
+:02:06.978575 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+:02:06.978590 emR3Debug: rc=VINF_EM_TRIPLE_FAULT
+}}}