/* $Id: bs3-apic-1-32.c32 96913 2022-09-28 09:12:10Z vboxsync $ */
/** @file
 * BS3Kit - bs3-apic-1, 32-bit C code.
 */

/*
 * Copyright (C) 2022 Oracle and/or its affiliates.
 *
 * This file is part of VirtualBox base platform packages, as
 * available from https://www.virtualbox.org.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation, in version 3 of the
 * License.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, see <https://www.gnu.org/licenses>.
 *
 * The contents of this file may alternatively be used under the terms
 * of the Common Development and Distribution License Version 1.0
 * (CDDL), a copy of it is provided in the "COPYING.CDDL" file included
 * in the VirtualBox distribution, in which case the provisions of the
 * CDDL are applicable instead of those of the GPL.
 *
 * You may elect to license modified versions of this file under the
 * terms and conditions of either the GPL or the CDDL or both.
 *
 * SPDX-License-Identifier: GPL-3.0-only OR CDDL-1.0
 */


/*********************************************************************************************************************************
*   Header Files                                                                                                                 *
*********************************************************************************************************************************/
#include <bs3kit.h>
#include <iprt/asm-amd64-x86.h>
#include <iprt/x86.h>
#include <VBox/apic.h>


static void printBitmap(const char BS3_FAR *pszName, uint32_t BS3_FAR volatile *pau32Bitmap)
{
    unsigned off;
    Bs3TestPrintf("%s:", pszName);
    for (off = 0; off < 0x80; off += 0x10)
    {
        uint32_t uVal = pau32Bitmap[off / sizeof(uint32_t)];
        Bs3TestPrintf(off != 0 ? "'%08x" : "%08x", uVal);
    }
    Bs3TestPrintf("\n");
}


BS3_DECL(void) ProtModeApicTests(void)
{
    uint64_t uApicBase2, uApicBase;

    Bs3TestSub("protected mode");
    uApicBase = ASMRdMsr(MSR_IA32_APICBASE);

    /* Disable the APIC (according to wiki.osdev.org/APIC, disabling the
       APIC could require a CPU reset to re-enable it, but it works for us): */
    ASMWrMsr(MSR_IA32_APICBASE, uApicBase & ~(uint64_t)MSR_IA32_APICBASE_EN);
    uApicBase2 = ASMRdMsr(MSR_IA32_APICBASE);
    if (uApicBase2 == (uApicBase & ~(uint64_t)MSR_IA32_APICBASE_EN))
        Bs3TestPrintf("Disabling worked.\n");
    else
        Bs3TestFailedF("Disabling the APIC did not work (%#RX64)", uApicBase2);

    /* Enabling the APIC: */
    ASMWrMsr(MSR_IA32_APICBASE, uApicBase | MSR_IA32_APICBASE_EN);
    uApicBase2 = ASMRdMsr(MSR_IA32_APICBASE);
    if (uApicBase2 == (uApicBase | MSR_IA32_APICBASE_EN))
    {
        uint8_t  BS3_FAR volatile * const  pabApic   = (uint8_t  BS3_FAR volatile *)((uintptr_t)uApicBase & X86_PAGE_4K_BASE_MASK);
        uint32_t BS3_FAR volatile * const  pau32Apic = (uint32_t BS3_FAR volatile *)pabApic;
        uint32_t                           i, uVal, uVal2;
        Bs3TestPrintf("Enabling worked.\n");

        /*
         * Do some register reads and such.
         */
        uVal = pau32Apic[XAPIC_OFF_VERSION / sizeof(uint32_t)];
        Bs3TestPrintf("APIC version: %#x\n", uVal);
        if (   APIC_REG_VERSION_GET_VER(uVal) != XAPIC_HARDWARE_VERSION_P4
            && APIC_REG_VERSION_GET_VER(uVal) != XAPIC_HARDWARE_VERSION_P6)
            Bs3TestFailedF("Unexpected APIC version: %#x (%#x)", APIC_REG_VERSION_GET_VER(uVal), uVal);

        Bs3TestPrintf("APIC ID:      %#x\n", pau32Apic[XAPIC_OFF_ID / sizeof(uint32_t)]);

        Bs3TestPrintf("TPR:          %#x\n", pau32Apic[XAPIC_OFF_TPR / sizeof(uint32_t)]);
        for (i = 0; i < 5; i++)
        {
            Bs3TestPrintf("TPR write test iteration #%u\n", i + 1);
            uVal = 256;
            while (uVal-- > 0)
            {
                pau32Apic[XAPIC_OFF_TPR / sizeof(uint32_t)] = uVal;
                uVal2 = pau32Apic[XAPIC_OFF_TPR / sizeof(uint32_t)];
                if (uVal2 != uVal)
                    Bs3TestFailedF("Setting TPR to %#x failed, read back %#x", uVal, uVal2);
            }
        }
        Bs3TestPrintf("APR:          %#x\n", pau32Apic[XAPIC_OFF_APR / sizeof(uint32_t)]);
        Bs3TestPrintf("PPR:          %#x\n", pau32Apic[XAPIC_OFF_PPR / sizeof(uint32_t)]);
        printBitmap("ISR", &pau32Apic[XAPIC_OFF_ISR0 / sizeof(uint32_t)]);
        printBitmap("TMR", &pau32Apic[XAPIC_OFF_TMR0 / sizeof(uint32_t)]);
        printBitmap("IRR", &pau32Apic[XAPIC_OFF_IRR0 / sizeof(uint32_t)]);
    }
    else
        Bs3TestFailedF("Enabling the APIC did not work (%#RX64)", uApicBase2);
}