# $Id: Config.kmk 82968 2020-02-04 10:35:17Z vboxsync $ ## @file # kBuild Configuration file for VirtualBox Boot Sector Kit 3. # # # Copyright (C) 2010-2020 Oracle Corporation # # This file is part of VirtualBox Open Source Edition (OSE), as # available from http://www.virtualbox.org. This file is free software; # you can redistribute it and/or modify it under the terms of the GNU # General Public License (GPL) as published by the Free Software # Foundation, in version 2 as it comes in the "COPYING" file of the # VirtualBox OSE distribution. VirtualBox OSE is distributed in the # hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. # # The contents of this file may alternatively be used under the terms # of the Common Development and Distribution License Version 1.0 # (CDDL) only, as it comes in the "COPYING.CDDL" file of the # VirtualBox OSE distribution, in which case the provisions of the # CDDL are applicable instead of those of the GPL. # # You may elect to license modified versions of this file under the # terms and conditions of either the GPL or the CDDL or both. # VBOX_BOOTSECTORS_CONFIG_KMK_INCLUDED = 1 # Include the parent configure file. ifndef VBOX_VALIDATIONKIT_CONFIG_KMK_INCLUDED include $(PATH_ROOT)/src/VBox/ValidationKit/Config.kmk endif # Add our 32-bit and 64-bit C properties. KBUILD_COMPILE_CATEGTORIES += C32 C64 PROPS_TOOLS += C32TOOL C64TOOL PROPS_SINGLE += C32TOOL C64TOOL C32OBJSUFF C64OBJSUFF PROPS_ACCUMULATE_R += C32FLAGS C64FLAGS C32DEFS C64DEFS PROPS_ACCUMULATE_L += C32INCS C64INCS if 0 # Adding as few as possible new properties. KBUILD_COMPILE_CATEGTORIES += C16 PROPS_TOOLS += C16TOOL PROPS_SINGLE += C16TOOL C16OBJSUFF PROPS_ACCUMULATE_R += C16FLAGS C16DEFS PROPS_ACCUMULATE_L += C16INCS endif # Add noarch to the architectures list (will be there by default in a new kBuild). KBUILD_ARCHES += noarch # The bootsector directory. VBOX_PATH_BOOTSECTORS_SRC = $(VBOX_PATH_VALIDATIONKIT_SRC)/bootsectors # The bs3kit source directory. VBOX_PATH_BS3KIT_SRC = $(VBOX_PATH_BOOTSECTORS_SRC)/bs3kit # The 16-bit code & data segment classes. if 1 BS3KIT_CLASS_CODE16 = CODE BS3KIT_SEGNM_DATA16 = BS3KIT_CLASS_DATA16 = DATA BS3KIT_GRPNM_DATA16 = DGROUP BS3KIT_CLASS_BSS16 = BSS else BS3KIT_CLASS_CODE16 = BS3CLASS16CODE BS3KIT_SEGNM_DATA16 = BS3DATA16 BS3KIT_CLASS_DATA16 = FAR_DATA BS3KIT_GRPNM_DATA16 = BS3DATA16_GROUP BS3KIT_CLASS_BSS16 = ??? endif ## # Macro for generating near-call aliases for one 16-bit C function. # @param 1 The target name. # @param 2 The common function. BS3KIT_FN_GEN_CMN_NEARSTUB = $(evalcall2 def_Bs3KitGenNearStubSource,$1,_$2_c16,_$2_f16) ## # Macro for generating near-call aliases for one 16-bit C mode function. # @param 1 The target name. # @param 2 The mode function. BS3KIT_FN_GEN_MODE_NEARSTUB = $(foreach suff, \ _rm \ _pe16 \ _pe16_v86 \ _pe32_16 \ _pev86 \ _pp16 \ _pp16_v86 \ _pp32_16 \ _ppv86 \ _pae16 \ _pae16_v86 \ _pae32_16 \ _paev86 \ _lm16 \ ,$(evalcall2 def_Bs3KitGenNearStubSource,$1,_$2$(suff),_$2$(suff)_far)) # @param 1 The target name. # @param 2 The near function name. # @param 3 The far function name. define def_Bs3KitGenNearStubSource $1_SOURCES += $$($1_0_OUTDIR)/stub$2.asm $1_CLEAN += $$($1_0_OUTDIR)/stub$2.asm $$$$($1_0_OUTDIR)/stub$2.asm: $$(VBOX_PATH_BOOTSECTORS_SRC)/Config.kmk | $$$$(dir $$$$@) $(QUIET)$(APPEND) -tn $$@ \ '%include "bs3kit.mac"' \ 'BS3_BEGIN_TEXT16' \ ' extern $3' \ 'BS3_BEGIN_TEXT16_NEARSTUBS' \ 'BS3_GLOBAL_NAME_EX $2, function, 6' \ ' pop ax' \ ' push cs' \ ' push ax' \ ' jmp $3 wrt CGROUP16' endef ## # Macro for generating far-call aliases for zero or more 16-bit C or assembly functions. # @param 1 The target name. # @param 2 The common function. # @param 3 The parameter size in bytes. BS3KIT_FN_GEN_CMN_FARSTUB = $(evalcall2 def_Bs3KitGenFarStubSource,$1,$2,_f16,_c16,$3) ## # Macro for generating far-call aliases for zero or more 16-bit C mode functions. # @param 1 The target name. # @param 2 The mode function. # @param 3 The parameter size in bytes. BS3KIT_FN_GEN_MODE_FARSTUB = $(foreach suff, \ _rm \ _pe16 \ _pe16_v86 \ _pe32_16 \ _pev86 \ _pp16 \ _pp16_v86 \ _pp32_16 \ _ppv86 \ _pae16 \ _pae16_v86 \ _pae32_16 \ _paev86 \ _lm16 \ ,$(evalcall2 def_Bs3KitGenFarStubSource,$1,$2,$(suff)_far,$(suff),$3)) # @param 1 The target name. # @param 2 The function name. # @param 3 The far function suffix. # @param 4 The near function suffix. # @param 5 The parameter size in bytes. define def_Bs3KitGenFarStubSource $1_SOURCES += $$($1_0_OUTDIR)/stub_$2$3.asm $1_CLEAN += $$($1_0_OUTDIR)/stub_$2$3.asm $$$$($1_0_OUTDIR)/stub_$2$3.asm: $$(VBOX_PATH_BOOTSECTORS_SRC)/Config.kmk | $$$$(dir $$$$@) $(QUIET)$(APPEND) -tn $$@ \ '%include "bs3kit.mac"' \ 'BS3_BEGIN_TEXT16' \ ' extern _$2$4' \ 'BS3_BEGIN_TEXT16_FARSTUBS' \ 'BS3_PROC_BEGIN _$2$3' \ ' CPU 8086' \ ' inc bp' \ ' push bp' \ ' mov bp, sp' \ '%assign offParam $5' \ '%rep $5 / 2' \ ' push word [bp + 2 + 4 + offParam - 2]' \ '%assign offParam offParam - 2' \ '%endrep' \ ' call _$2$4' \ ' add sp, $5' \ ' pop bp' \ ' dec bp' \ ' retf' \ 'BS3_PROC_END _$2$3' \ '' endef # # Tools Tools Tools # Tools Tools Tools # Tools Tools Tools # if defined(VBOX_USE_KSUBMIT) && "$(KBUILD_HOST)" == "win" VBOX_BS3KIT_KSUBMIT_OBJ_CONV := kmk_builtin_kSubmit -- else VBOX_BS3KIT_KSUBMIT_OBJ_CONV := endif # Dummy CP "linker" tool. TOOL_VBoxBsCpLd = Dummy copy linker. TOOL_VBoxBsCpLd_LINK_MISCBIN_OUTPUT = TOOL_VBoxBsCpLd_LINK_MISCBIN_DEPEND = TOOL_VBoxBsCpLd_LINK_MISCBIN_DEPORD = define TOOL_VBoxBsCpLd_LINK_MISCBIN_CMDS $(CP) -- $(objs) $(othersrc) "$(out)" endef # Dummy exit 1 "linker" tool. TOOL_VBoxBsUnusedLd = Dummy unused linker. TOOL_VBoxBsUnusedLd_LINK_MISCBIN_OUTPUT = TOOL_VBoxBsUnusedLd_LINK_MISCBIN_DEPEND = TOOL_VBoxBsUnusedLd_LINK_MISCBIN_DEPORD = define TOOL_VBoxBsUnusedLd_LINK_MISCBIN_CMDS echo "cannot use this template for linking" exit 1 endef # NASM tool with dependency workarounds (change dir to force consistent results; add -MP). # Requires http://permalink.gmane.org/gmane.comp.lang.nasm.devel/3704 to work. include $(KBUILD_PATH)/tools/NASM.kmk TOOL_VBoxNasm = Our version of the NASM tool ifndef TOOL_VBoxNasm_PATH TOOL_VBoxNasm_PATH := $(firstword $(rsort $(wildcard $(KBUILD_DEVTOOLS_HST)/nasm/v*.*))) if "$(TOOL_VBoxNasm_PATH)" == "" && "$(KBUILD_DEVTOOLS_HST_ALT)" != "" TOOL_VBoxNasm_PATH := $(firstword $(rsort $(wildcard $(KBUILD_DEVTOOLS_HST_ALT)/nasm/v*.*))) endif endif ifneq ($(TOOL_VBoxNasm_PATH),) TOOL_VBoxNasm_AS ?= $(TOOL_VBoxNasm_PATH)/nasm$(HOSTSUFF_EXE) else TOOL_VBoxNasm_AS ?= nasm$(HOSTSUFF_EXE) endif TOOL_VBoxNasm_ASFLAGS ?= $(TOOL_NASM_ASFLAGS) TOOL_VBoxNasm_COMPILE_AS_OUTPUT = $(outbase).lst TOOL_VBoxNasm_COMPILE_AS_OUTPUT_MAYBE = $(obj).original TOOL_VBoxNasm_COMPILE_AS_DEPEND = $(VBoxBs3ObjConverter_1_TARGET) TOOL_VBoxNasm_COMPILE_AS_DEPORD = define TOOL_VBoxNasm_COMPILE_AS_CMDS ifdef TOOL_VBoxNasm_USE_KSUBMIT $(QUIET)kmk_builtin_kSubmit -C $(PATH_OUT_BASE) -- $(TOOL_VBoxNasm_AS)\ $(flags) $(addsuffix /,$(addprefix -i, $(incs))) $(addprefix -D, $(defs))\ -l $(outbase).lst\ -o $(obj)\ -MD "$(dep)" -MP\ $(abspath $(source)) else $(QUIET)$(REDIRECT) -C $(PATH_OUT_BASE) -- $(TOOL_VBoxNasm_AS)\ $(flags) $(addsuffix /,$(addprefix -i, $(incs))) $(addprefix -D, $(defs))\ -l $(outbase).lst\ -o $(obj)\ -MD "$(dep)" -MP\ $(abspath $(source)) endif $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef # # ELF 64-bit compiler tool with object conversion. # # Mac needs cross compiler: sudo port install x86_64-elf-gcc # TOOL_Bs3Gcc64Elf64 := AMD64/ELF64 gcc/g++ (cross) compiler. ifeq ($(KBUILD_HOST),darwin) TOOL_Bs3Gcc64Elf64_CC ?= x86_64-elf-gcc$(HOSTSUFF_EXE) -m64 TOOL_Bs3Gcc64Elf64_CXX ?= x86_64-elf-g++$(HOSTSUFF_EXE) -m64 else TOOL_Bs3Gcc64Elf64_CC ?= gcc$(HOSTSUFF_EXE) -m64 TOOL_Bs3Gcc64Elf64_CXX ?= g++$(HOSTSUFF_EXE) -m64 endif ifdef SLKRUNS TOOL_Bs3Gcc64Elf64_CC += -fmessage-length=0 TOOL_Bs3Gcc64Elf64_CXX += -fmessage-length=0 endif TOOL_Bs3Gcc64Elf64_COBJSUFF = .o64 TOOL_Bs3Gcc64Elf64_CFLAGS = -fno-pie -x c $(VBOX_GCC_Wa_cma_nocompress_debug_sections) TOOL_Bs3Gcc64Elf64_CFLAGS.debug = -g TOOL_Bs3Gcc64Elf64_CFLAGS.profile = -O2 #-g -pg TOOL_Bs3Gcc64Elf64_CFLAGS.release = -O2 TOOL_Bs3Gcc64Elf64_CINCS = TOOL_Bs3Gcc64Elf64_CDEFS = TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPEND = $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPORD = TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT = TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT_MAYBE = $(obj).original define TOOL_Bs3Gcc64Elf64_COMPILE_C_CMDS $(QUIET)$(TOOL_Bs3Gcc64Elf64_CC) -c\ $(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\ -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ -o $(obj)\ $(abspath $(source)) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" endef TOOL_Bs3Gcc64Elf64_C64OBJSUFF = $(TOOL_Bs3Gcc64Elf64_COBJSUFF) TOOL_Bs3Gcc64Elf64_C64FLAGS = $(TOOL_Bs3Gcc64Elf64_CFLAGS) TOOL_Bs3Gcc64Elf64_C64FLAGS.debug = $(TOOL_Bs3Gcc64Elf64_CFLAGS.debug) TOOL_Bs3Gcc64Elf64_C64FLAGS.profile = $(TOOL_Bs3Gcc64Elf64_CFLAGS.profile) TOOL_Bs3Gcc64Elf64_C64FLAGS.release = $(TOOL_Bs3Gcc64Elf64_CFLAGS.release) TOOL_Bs3Gcc64Elf64_C64INCS = $(TOOL_Bs3Gcc64Elf64_CINCS) TOOL_Bs3Gcc64Elf64_C64DEFS = $(TOOL_Bs3Gcc64Elf64_CDEFS) TOOL_Bs3Gcc64Elf64_COMPILE_C64_DEPEND = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPEND) TOOL_Bs3Gcc64Elf64_COMPILE_C64_DEPORD = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_DEPORD) TOOL_Bs3Gcc64Elf64_COMPILE_C64_OUTPUT = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT) TOOL_Bs3Gcc64Elf64_COMPILE_C64_OUTPUT_MAYBE = $(TOOL_Bs3Gcc64Elf64_COMPILE_C_OUTPUT_MAYBE) define TOOL_Bs3Gcc64Elf64_COMPILE_C64_CMDS $(TOOL_Bs3Gcc64Elf64_COMPILE_C_CMDS) endef TOOL_Bs3Gcc64Elf64_CXXOBJSUFF ?= .o TOOL_Bs3Gcc64Elf64_CXXFLAGS ?= -fno-pie $(VBOX_GCC_Wa_cma_nocompress_debug_sections) TOOL_Bs3Gcc64Elf64_CXXFLAGS.debug ?= -g0 # no debug info, thank you TOOL_Bs3Gcc64Elf64_CXXFLAGS.profile ?= -O2 #-g -pg TOOL_Bs3Gcc64Elf64_CXXFLAGS.release ?= -O2 TOOL_Bs3Gcc64Elf64_CXXINCS ?= TOOL_Bs3Gcc64Elf64_CXXDEFS ?= TOOL_Bs3Gcc64Elf64_COMPILE_CXX_DEPEND = $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Gcc64Elf64_COMPILE_CXX_DEPORD = TOOL_Bs3Gcc64Elf64_COMPILE_CXX_OUTPUT = TOOL_Bs3Gcc64Elf64_COMPILE_CXX_OUTPUT_MAYBE = $(obj).original define TOOL_Bs3Gcc64Elf64_COMPILE_CXX_CMDS $(QUIET)$(TOOL_Bs3Gcc64Elf64_CXX) -c\ $(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\ -Wp,-MD,$(dep) -Wp,-MT,$(obj) -Wp,-MP\ -o $(obj)\ $(abspath $(source)) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" $(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" "" endef # # Visual C++ tool variant that runs the object converter afterwards. # TOOL_Bs3Vcc64 := Visual C++ 64-bit TOOL_Bs3Vcc64_CC = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CC) TOOL_Bs3Vcc64_CXX = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXX) TOOL_Bs3Vcc64_COBJSUFF = .o64 TOOL_Bs3Vcc64_CFLAGS = $(filter-out -TC,$(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CFLAGS)) -TC TOOL_Bs3Vcc64_CFLAGS.debug = TOOL_Bs3Vcc64_CFLAGS.dbgopt = -O1 TOOL_Bs3Vcc64_CFLAGS.profile = -O1 TOOL_Bs3Vcc64_CFLAGS.release = -O1 TOOL_Bs3Vcc64_CINCS = $(PATH_TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_INC) TOOL_Bs3Vcc64_CDEFS = TOOL_Bs3Vcc64_COMPILE_C_DEPEND = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Vcc64_COMPILE_C_DEPORD = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_DEPORD) TOOL_Bs3Vcc64_COMPILE_C_OUTPUT = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_OUTPUT) TOOL_Bs3Vcc64_COMPILE_C_OUTPUT_MAYBE = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Vcc64_COMPILE_C_CMDS $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_C_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef TOOL_Bs3Vcc64_C64OBJSUFF = $(TOOL_Bs3Vcc64_COBJSUFF) TOOL_Bs3Vcc64_C64FLAGS = $(TOOL_Bs3Vcc64_CFLAGS) TOOL_Bs3Vcc64_C64FLAGS.debug = $(TOOL_Bs3Vcc64_CFLAGS.debug) TOOL_Bs3Vcc64_C64FLAGS.dbgopt = $(TOOL_Bs3Vcc64_CFLAGS.dbgopt) TOOL_Bs3Vcc64_C64FLAGS.profile = $(TOOL_Bs3Vcc64_CFLAGS.profile) TOOL_Bs3Vcc64_C64FLAGS.release = $(TOOL_Bs3Vcc64_CFLAGS.release) TOOL_Bs3Vcc64_C64INCS = $(TOOL_Bs3Vcc64_CINCS) TOOL_Bs3Vcc64_C64DEFS = $(TOOL_Bs3Vcc64_CDEFS) TOOL_Bs3Vcc64_COMPILE_C64_DEPEND = $(TOOL_Bs3Vcc64_COMPILE_C_DEPEND) TOOL_Bs3Vcc64_COMPILE_C64_DEPORD = $(TOOL_Bs3Vcc64_COMPILE_C_DEPORD) TOOL_Bs3Vcc64_COMPILE_C64_OUTPUT = $(TOOL_Bs3Vcc64_COMPILE_C_OUTPUT) TOOL_Bs3Vcc64_COMPILE_C64_OUTPUT_MAYBE = $(TOOL_Bs3Vcc64_COMPILE_C_OUTPUT_MAYBE) define TOOL_Bs3Vcc64_COMPILE_C64_CMDS $(TOOL_Bs3Vcc64_COMPILE_C_CMDS) endef TOOL_Bs3Vcc64_CXXOBJSUFF = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXXOBJSUFF) TOOL_Bs3Vcc64_CXXFLAGS = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_CXXFLAGS) -TP TOOL_Bs3Vcc64_CXXFLAGS.debug = TOOL_Bs3Vcc64_CXXFLAGS.dbgopt = -O1 TOOL_Bs3Vcc64_CXXFLAGS.profile = -O1 TOOL_Bs3Vcc64_CXXFLAGS.release = -O1 TOOL_Bs3Vcc64_CXXINCS = $(PATH_TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_INC) TOOL_Bs3Vcc64_CXXDEFS = TOOL_Bs3Vcc64_COMPILE_CXX_DEPEND = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Vcc64_COMPILE_CXX_DEPORD = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_DEPORD) TOOL_Bs3Vcc64_COMPILE_CXX_OUTPUT = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_OUTPUT) TOOL_Bs3Vcc64_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Vcc64_COMPILE_CXX_CMDS $(TOOL_$(VBOX_VCC_TOOL_STEM)AMD64_COMPILE_CXX_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef # # 32-bit OpenWatcom C/C++ tool variant that runs the object converter afterwards # to rename intrinsic functions so they don't clash with the 16-bit compiler. # TOOL_Bs3Ow32 := OpenWatcom C/C++ 32-bit with object convertsion TOOL_Bs3Ow32_CC = $(TOOL_OPENWATCOM_CC) TOOL_Bs3Ow32_CXX = $(TOOL_OPENWATCOM_CXX) TOOL_Bs3Ow32_COBJSUFF = .o32 TOOL_Bs3Ow32_CFLAGS = $(TOOL_OPENWATCOM_CFLAGS) # -adfs \ - This is too complicated and it doesn't support stubbing files (svn rename fun.h pain.h). Use kDepObj instead. # -ad=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dep)) \ # -adt=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(obj)) \ # -add=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(abspath $(source))) \ # -adhp=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dir $(abspath $(source)))) TOOL_Bs3Ow32_CFLAGS.debug = $(TOOL_OPENWATCOM_CFLAGS.debug) TOOL_Bs3Ow32_CFLAGS.dbgopt = $(TOOL_OPENWATCOM_CFLAGS.dbgopt) TOOL_Bs3Ow32_CFLAGS.profile = $(TOOL_OPENWATCOM_CFLAGS.profile) TOOL_Bs3Ow32_CFLAGS.release = $(TOOL_OPENWATCOM_CFLAGS.release) TOOL_Bs3Ow32_CINCS = $(TOOL_OPENWATCOM_CINCS) TOOL_Bs3Ow32_CDEFS = TOOL_Bs3Ow32_COMPILE_C_DEPEND = $(TOOL_OPENWATCOM_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Ow32_COMPILE_C_DEPORD = $(TOOL_OPENWATCOM_COMPILE_C_DEPORD) TOOL_Bs3Ow32_COMPILE_C_OUTPUT = $(TOOL_OPENWATCOM_COMPILE_C_OUTPUT) TOOL_Bs3Ow32_COMPILE_C_OUTPUT_MAYBE = $(TOOL_OPENWATCOM_COMPILE_C_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Ow32_COMPILE_C_CMDS $(TOOL_OPENWATCOM_COMPILE_C_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef TOOL_Bs3Ow32_C32OBJSUFF = $(TOOL_Bs3Ow32_COBJSUFF) TOOL_Bs3Ow32_C32FLAGS = $(TOOL_Bs3Ow32_CFLAGS) TOOL_Bs3Ow32_C32FLAGS.debug = $(TOOL_Bs3Ow32_CFLAGS.debug) TOOL_Bs3Ow32_C32FLAGS.dbgopt = $(TOOL_Bs3Ow32_CFLAGS.dbgopt) TOOL_Bs3Ow32_C32FLAGS.profile = $(TOOL_Bs3Ow32_CFLAGS.profile) TOOL_Bs3Ow32_C32FLAGS.release = $(TOOL_Bs3Ow32_CFLAGS.release) TOOL_Bs3Ow32_C32INCS = $(TOOL_Bs3Ow32_CINCS) TOOL_Bs3Ow32_C32DEFS = TOOL_Bs3Ow32_COMPILE_C32_DEPEND = $(TOOL_Bs3Ow32_COMPILE_C_DEPEND) TOOL_Bs3Ow32_COMPILE_C32_DEPORD = $(TOOL_Bs3Ow32_COMPILE_C_DEPORD) TOOL_Bs3Ow32_COMPILE_C32_OUTPUT = $(TOOL_Bs3Ow32_COMPILE_C_OUTPUT) TOOL_Bs3Ow32_COMPILE_C32_OUTPUT_MAYBE = $(TOOL_Bs3Ow32_COMPILE_C_OUTPUT_MAYBE) define TOOL_Bs3Ow32_COMPILE_C32_CMDS $(TOOL_Bs3Ow32_COMPILE_C_CMDS) endef TOOL_Bs3Ow32_CXXOBJSUFF = $(TOOL_OPENWATCOM_CXXOBJSUFF) TOOL_Bs3Ow32_CXXFLAGS = $(TOOL_OPENWATCOM_CXXFLAGS) -ad=$(call TOOL_OPENWATCOM_FIX_SLASHES,$(dep)) -adfs TOOL_Bs3Ow32_CXXFLAGS.debug = $(TOOL_OPENWATCOM_CXXFLAGS.debug) TOOL_Bs3Ow32_CXXFLAGS.dbgopt = $(TOOL_OPENWATCOM_CXXFLAGS.dbgopt) TOOL_Bs3Ow32_CXXFLAGS.profile = $(TOOL_OPENWATCOM_CXXFLAGS.profile) TOOL_Bs3Ow32_CXXFLAGS.release = $(TOOL_OPENWATCOM_CXXFLAGS.release) TOOL_Bs3Ow32_CXXINCS = $(TOOL_OPENWATCOM_CXXINCS) TOOL_Bs3Ow32_CXXDEFS = TOOL_Bs3Ow32_COMPILE_CXX_DEPEND = $(TOOL_OPENWATCOM_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Ow32_COMPILE_CXX_DEPORD = $(TOOL_OPENWATCOM_COMPILE_CXX_DEPORD) TOOL_Bs3Ow32_COMPILE_CXX_OUTPUT = $(TOOL_OPENWATCOM_COMPILE_CXX_OUTPUT) TOOL_Bs3Ow32_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_OPENWATCOM_COMPILE_CXX_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Ow32_COMPILE_CXX_CMDS $(TOOL_OPENWATCOM_COMPILE_CXX_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef # # 16-bit OpenWatcom C/C++ tool variant that runs the object converter afterwards # to rename intrinsic functions so they don't clash with the 16-bit compiler. # TOOL_Bs3Ow16 := OpenWatcom C/C++ 16-bit with object convertsion TOOL_Bs3Ow16_CC = $(TOOL_OPENWATCOM-16_CC) TOOL_Bs3Ow16_CXX = $(TOOL_OPENWATCOM-16_CXX) TOOL_Bs3Ow16_COBJSUFF = .o16 TOOL_Bs3Ow16_CFLAGS = $(TOOL_OPENWATCOM-16_CFLAGS) TOOL_Bs3Ow16_CFLAGS.debug = $(TOOL_OPENWATCOM-16_CFLAGS.debug) TOOL_Bs3Ow16_CFLAGS.dbgopt = $(TOOL_OPENWATCOM-16_CFLAGS.dbgopt) TOOL_Bs3Ow16_CFLAGS.profile = $(TOOL_OPENWATCOM-16_CFLAGS.profile) TOOL_Bs3Ow16_CFLAGS.release = $(TOOL_OPENWATCOM-16_CFLAGS.release) TOOL_Bs3Ow16_CINCS = $(TOOL_OPENWATCOM-16_CINCS) TOOL_Bs3Ow16_CDEFS = TOOL_Bs3Ow16_COMPILE_C_DEPEND = $(TOOL_OPENWATCOM-16_COMPILE_C_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Ow16_COMPILE_C_DEPORD = $(TOOL_OPENWATCOM-16_COMPILE_C_DEPORD) TOOL_Bs3Ow16_COMPILE_C_OUTPUT = $(TOOL_OPENWATCOM-16_COMPILE_C_OUTPUT) TOOL_Bs3Ow16_COMPILE_C_OUTPUT_MAYBE = $(TOOL_OPENWATCOM-16_COMPILE_C_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Ow16_COMPILE_C_CMDS $(TOOL_OPENWATCOM-16_COMPILE_C_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef TOOL_Bs3Ow16_C16OBJSUFF = $(TOOL_Bs3Ow16_C16OBJSUFF) TOOL_Bs3Ow16_C16FLAGS = $(TOOL_Bs3Ow16_C16FLAGS) TOOL_Bs3Ow16_C16FLAGS.debug = $(TOOL_Bs3Ow16_C16FLAGS.debug) TOOL_Bs3Ow16_C16FLAGS.dbgopt = $(TOOL_Bs3Ow16_C16FLAGS.dbgopt) TOOL_Bs3Ow16_C16FLAGS.profile = $(TOOL_Bs3Ow16_C16FLAGS.profile) TOOL_Bs3Ow16_C16FLAGS.release = $(TOOL_Bs3Ow16_C16FLAGS.release) TOOL_Bs3Ow16_C16INCS = $(TOOL_Bs3Ow16_C16INCS) TOOL_Bs3Ow16_C16DEFS = $(TOOL_Bs3Ow16_C16DEFS) TOOL_Bs3Ow16_COMPILE_C16_DEPEND = $(TOOL_Bs3Ow16_COMPILE_C16_DEPEND) TOOL_Bs3Ow16_COMPILE_C16_DEPORD = $(TOOL_Bs3Ow16_COMPILE_C16_DEPORD) TOOL_Bs3Ow16_COMPILE_C16_OUTPUT = $(TOOL_Bs3Ow16_COMPILE_C16_OUTPUT) TOOL_Bs3Ow16_COMPILE_C16_OUTPUT_MAYBE = $(TOOL_Bs3Ow16_COMPILE_C16_OUTPUT_MAYBE) define TOOL_Bs3Ow16_COMPILE_C16_CMDS $(TOOL_Bs3Ow16_COMPILE_C_CMDS) endef TOOL_Bs3Ow16_CXXOBJSUFF = $(TOOL_OPENWATCOM-16_CXXOBJSUFF) TOOL_Bs3Ow16_CXXFLAGS = $(TOOL_OPENWATCOM-16_CXXFLAGS) TOOL_Bs3Ow16_CXXFLAGS.debug = $(TOOL_OPENWATCOM-16_CXXFLAGS.debug) TOOL_Bs3Ow16_CXXFLAGS.dbgopt = $(TOOL_OPENWATCOM-16_CXXFLAGS.dbgopt) TOOL_Bs3Ow16_CXXFLAGS.profile = $(TOOL_OPENWATCOM-16_CXXFLAGS.profile) TOOL_Bs3Ow16_CXXFLAGS.release = $(TOOL_OPENWATCOM-16_CXXFLAGS.release) TOOL_Bs3Ow16_CXXINCS = $(TOOL_OPENWATCOM-16_CXXINCS) TOOL_Bs3Ow16_CXXDEFS = TOOL_Bs3Ow16_COMPILE_CXX_DEPEND = $(TOOL_OPENWATCOM-16_COMPILE_CXX_DEPEND) $(VBoxBs3ObjConverter_1_TARGET) TOOL_Bs3Ow16_COMPILE_CXX_DEPORD = $(TOOL_OPENWATCOM-16_COMPILE_CXX_DEPORD) TOOL_Bs3Ow16_COMPILE_CXX_OUTPUT = $(TOOL_OPENWATCOM-16_COMPILE_CXX_OUTPUT) TOOL_Bs3Ow16_COMPILE_CXX_OUTPUT_MAYBE = $(TOOL_OPENWATCOM-16_COMPILE_CXX_OUTPUT_MAYBE) $(obj).original define TOOL_Bs3Ow16_COMPILE_CXX_CMDS $(TOOL_OPENWATCOM-16_COMPILE_CXX_CMDS) $(QUIET)$(VBOX_BS3KIT_KSUBMIT_OBJ_CONV) $(VBoxBs3ObjConverter_1_TARGET) "$(obj)" endef # Debug info format depends on what we use for 64-bit. if 1 #1of ($(KBUILD_HOST), win) - wlink dwarf .sym files are useless for binary blobs BS3_OW_DBG_OPT = -hc -d1+ #BS3_OW_DBG_OPT = -hd -d1+ BS3_OW_DBG_LDOPT = codeview else BS3_OW_DBG_OPT = -hd -d1+ BS3_OW_DBG_LDOPT = dwarf endif # # Source handlers for .c16, .c32 and .c64 # define VBoxBs3KitImgSrcHandler_16bit_c local type := C $(kb-src-one 2) endef C32TOOL = Bs3Ow32 define VBoxBs3KitImgSrcHandler_32bit_c local type := C32 $(kb-src-one 2) endef define VBoxBs3KitImgSrcHandler_64bit_c local type := C64 $(kb-src-one 2) endef # # BS3Kit template for assembly and 16-bit code. # # Note! Using -d1 as -d1+ and -d2 causes suboptimal code to be generated (strlen # reloading string pointer argument all the time). # Update! -d1+ is required for line number information in code living in include # files and any DWARF stuff at all. So, we'll ignore poor code quality. # Note! Optimization options should come after debug stuff as -d2 for instance # disables all optimziations. # Note! We use BS3CLASS16CODE because of wdis code detection heuristics requires the class # of a code segment to be exactly 'CODE', or ending with 'CODE' or 'TEXT' (more # recent wdis have a -c= option, but not the one we currently use ). # # # Compiler options explained: # -nt=xxxx Sets the text segment name. # -nc=xxxx Sets the text segment class name. # -nd=xxxx Sets the data segment name. # -ecc Sets the default calling convension to __cdecl # Update: We don't use this in 16-bit code as it causes unfavorable reloading of DS before calling # inlined functions (e.g. iprt/asm.h). Instead we use -ecw and __cdecl where needed. # Update: With -zdp the DS reloading is gone. Code is slightly larger, but seems to cure stability # issues in bs3CpuBasic2_RaiseXcpt1 (workers ending up with default calling convention). # -ecw Sets the default calling convension to __watcall () # -q Quiet, no logos or stuff. # -0 Use 8086 instruction set (16-bit only). # -3 Use 386 instruction set (16-bit only). # -e Stop after errors. # -wx Maxium warning level. # -zl Don't emit default library information. # -zdp DS pegged to BS3DATA16_GROUP/DGROUP. # -zu Assume SS != DS. # -mc Compact memory model, far data, small code. # -ml Large memory model, far data, far code. # -mf Flat memory model (32-bit). # -d+ Enabled better /dVAR=XXX parsing, using space as delimiter instead of alpha-numerical/whatever. # -d1 Debug info: Globals and line numbers. # -s No stack overflow checks. # -oa Relaxed aliasing constraints. # -ob Branch prediction. # -of Generate stack frames when needed. # -oi Inline instrinsics functions. # -ol Loop optimizations. # -oh Expensive optimizations. (saves a byte or two) # -or Reorder for best pipeline. # -os Favor size over speed. # TEMPLATE_VBoxBS3KitImg = Template for building BS3Kit test images. TEMPLATE_VBoxBS3KitImg_BLD_TRG = os-agnostic TEMPLATE_VBoxBS3KitImg_BLD_TRG_ARCH = noarch TEMPLATE_VBoxBS3KitImg_INST = $(INST_VALIDATIONKIT)bootsectors/ TEMPLATE_VBoxBS3KitImg_BINSUFF = .img TEMPLATE_VBoxBS3KitImg_MODE = 0644 TEMPLATE_VBoxBS3KitImg_SRC_HANDLERS = \ .c16:VBoxBs3KitImgSrcHandler_16bit_c \ .c32:VBoxBs3KitImgSrcHandler_32bit_c \ .c64:VBoxBs3KitImgSrcHandler_64bit_c TEMPLATE_VBoxBS3KitImg_ASOBJSUFF = .o16 TEMPLATE_VBoxBS3KitImg_ASTOOL = VBoxNasm TEMPLATE_VBoxBS3KitImg_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels TEMPLATE_VBoxBS3KitImg_ASDEFS = ASM_FORMAT_OMF RT_NOINC_SEGMENTS __NASM__ ARCH_BITS=16 RT_ARCH_X86 ASM_MODEL_FAR_CODE \ BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \ BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16) TEMPLATE_VBoxBS3KitImg_DEFS = IN_BS3KIT TEMPLATE_VBoxBS3KitImg_DEFS.debug = BS3_STRICT TEMPLATE_VBoxBS3KitImg_ARTOOL = OPENWATCOM-16 TEMPLATE_VBoxBS3KitImg_CTOOL = Bs3Ow16 TEMPLATE_VBoxBS3KitImg_CXXTOOL = Bs3Ow16 TEMPLATE_VBoxBS3KitImg_CFLAGS = $(if $(BS3KIT_SEGNM_DATA16),-nd=$(BS3KIT_SEGNM_DATA16),) \ -nt=BS3TEXT16 -nc=$(BS3KIT_CLASS_CODE16) -ecc -q -0 -e125 -wx -zl -zdp -zu -ml $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -oh -d+ TEMPLATE_VBoxBS3KitImg_CXXFLAGS = $(if $(BS3KIT_SEGNM_DATA16),-nd=$(BS3KIT_SEGNM_DATA16),) \ -nt=BS3TEXT16 -nc=$(BS3KIT_CLASS_CODE16) -ecc -q -0 -e125 -wx -zl -zdp -zu -ml $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -oh -d+ TEMPLATE_VBoxBS3KitImg_CDEFS = ARCH_BITS=16 RT_ARCH_X86 TEMPLATE_VBoxBS3KitImg_TOOL = $(NO_SUCH_VARIABLE) TEMPLATE_VBoxBS3KitImg_C16TOOL = $(TEMPLATE_VBoxBS3KitImg_CTOOL) TEMPLATE_VBoxBS3KitImg_C16FLAGS = $(TEMPLATE_VBoxBS3KitImg_CFLAGS) TEMPLATE_VBoxBS3KitImg_C16DEFS = $(TEMPLATE_VBoxBS3KitImg_CDEFS) TEMPLATE_VBoxBS3KitImg_C32TOOL := Bs3Ow32 TEMPLATE_VBoxBS3KitImg_C32FLAGS = $(TEMPLATE_VBoxBS3KitImg32_CFLAGS) TEMPLATE_VBoxBS3KitImg_C32DEFS = ARCH_BITS=32 RT_ARCH_X86 TEMPLATE_VBoxBS3KitImg_C64TOOL = $(TEMPLATE_VBoxBS3KitImg64_CTOOL) TEMPLATE_VBoxBS3KitImg_C64FLAGS = $(TEMPLATE_VBoxBS3KitImg64_CFLAGS) TEMPLATE_VBoxBS3KitImg_C64DEFS = ARCH_BITS=64 RT_ARCH_AMD64 TEMPLATE_VBoxBS3KitImg_INCS = $(VBOX_PATH_BS3KIT_SRC) . TEMPLATE_VBoxBS3KitImg_LDTOOL = OPENWATCOM-WL # linker options: # system dos: Link a 16-bit DOS binary. # output raw ...: Produce a raw DOS binary for loading at flat address 10000h. # The following is for ordering segments. # option start=_start: The start symbol in bs3-first-xxx.asm. # debug codeview/dwarf all: Full debug information either in codeview or dwarf. # option symfile: Produce a separate symbol file with the debug info. # option map: Produce a map file. # option farcalls: Change intrasegment far calls into 'push cs; seg ds; call symbol' where possible. # option statics: ? # option verbose: Verbose map file? # option disable 1014: Disable warning about 'stack segment not found'. # option disable 1080: Disable warning about '%1 is a 32-bit object file'. # # Note! We're pushing DATA16 to 0x20000 because it's impossible to force wlink # to give us a real-mode + GDT compatible alignment (0ffffff80h), i.e. # real-mode address on the form 0fff8:0000. TEMPLATE_VBoxBS3KitImg_LDFLAGS = system dos \ debug $(BS3_OW_DBG_LDOPT) all \ option quiet, map, statics, verbose, symfile, start=_start, farcalls \ disable 1014, 1080 \ \ output raw offset=0x10000 \ order \ clname BS3FLAT segaddr=0x0000 \ segment BS3FLAT segaddr=0x0000 \ clname $(BS3KIT_CLASS_CODE16) segaddr=0x1000 \ segment BS3TEXT16 \ segment BS3TEXT16_NEARSTUBS \ segment BS3TEXT16_FARSTUBS \ segment BS3TEXT16_END \ clname BS3SYSTEM16 segaddr=0x2000 \ segment BS3SYSTEM16 \ $(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \ clname DATA \ segment BS3DATA16 segaddr=0x2900 \ segment BS3DATA16_DATA \ segment DATA \ segment _DATA \ segment BS3DATA16CONST \ segment CONST \ segment BS3DATA16CONST2 \ segment CONST2 \ segment STRINGS \ segment BS3DATA16_END \ clname BSS \ segment BSS \ segment _BSS \ segment BS3DATA16_END \ clname FAR_DATA \ segment FAR_DATA \ , \ clname FAR_DATA \ segment BS3DATA16 segaddr=0x2900 \ segment FAR_DATA \ segment BS3DATA16CONST \ segment BS3DATA16CONST2 \ segment BS3DATA16_DATA \ segment BS3DATA16_END \ ) \ segment BS3DATA32 \ segment BS3DATA32CONST \ segment BS3DATA32CONST2 \ segment BS3DATA32_DATA \ segment BS3DATA32_BSS \ segment BS3DATA32_END \ \ segment BS3DATA64 \ segment BS3DATA64CONST \ segment BS3DATA64_BSS \ segment BS3DATA64_END \ clname BS3CLASS16RMCODE \ segment BS3RMCODE16_START \ segment BS3RMCODE16 \ segment BS3RMCODE16_END \ clname BS3CLASS16X0CODE \ segment BS3X0CODE16_START \ segment BS3X0CODE16 \ segment BS3X0CODE16_END \ clname BS3CLASS16X1CODE \ segment BS3X1CODE16_START \ segment BS3X1CODE16 \ segment BS3X1CODE16_END \ clname BS3CLASS32CODE \ segment BS3TEXT32_START \ segment BS3TEXT32 \ segment BS3TEXT32_END \ clname BS3CLASSSEPARATE32AND64BITCODE \ segment BS3SEPARATE32AND64BITCODE \ segment BS3SEPARATE32AND64BITCODE_END \ clname BS3CLASS64CODE \ segment BS3TEXT64_START \ segment BS3TEXT64 \ segment BS3TEXT64_END TEMPLATE_VBoxBS3KitImg_LNK_DEPS = \ $(bs3-bootsector_1_TARGET) \ $(VBoxBs3Linker_1_TARGET) TEMPLATE_VBoxBS3KitImg_POST_CMDS = $(if $(eq $(tool_do),LINK_LIBRARY)\ ,,$(QUIET)$(MV_EXT) -f -- "$(out)" "$(out).tmp" \ $$(NLTAB)$(QUIET)$(VBoxBs3Linker_1_TARGET) -o $(out) $(bs3-bootsector_1_TARGET) $(out).tmp \ $$(NLTAB)$(QUIET)$(RM_EXT) -f -- "$(out).tmp") \ $(eval .PRECIOUS: $(outbase).map) # ugly hack! TEMPLATE_VBoxBS3KitImg_LIBS = \ $(PATH_OBJ)/bs3kit-common-16/bs3kit-common-16.lib \ $(PATH_OBJ)/bs3kit-common-32/bs3kit-common-32.lib \ $(PATH_OBJ)/bs3kit-common-64/bs3kit-common-64.lib \ \ $(PATH_OBJ)/bs3kit-rm/bs3kit-rm.lib \ $(PATH_OBJ)/bs3kit-pe16/bs3kit-pe16.lib \ $(PATH_OBJ)/bs3kit-pe16_32/bs3kit-pe16_32.lib \ $(PATH_OBJ)/bs3kit-pe16_v86/bs3kit-pe16_v86.lib \ $(PATH_OBJ)/bs3kit-pe32/bs3kit-pe32.lib \ $(PATH_OBJ)/bs3kit-pe32_16/bs3kit-pe32_16.lib \ $(PATH_OBJ)/bs3kit-pev86/bs3kit-pev86.lib \ $(PATH_OBJ)/bs3kit-pp16/bs3kit-pp16.lib \ $(PATH_OBJ)/bs3kit-pp16_32/bs3kit-pp16_32.lib \ $(PATH_OBJ)/bs3kit-pp16_v86/bs3kit-pp16_v86.lib \ $(PATH_OBJ)/bs3kit-pp32/bs3kit-pp32.lib \ $(PATH_OBJ)/bs3kit-pp32_16/bs3kit-pp32_16.lib \ $(PATH_OBJ)/bs3kit-ppv86/bs3kit-ppv86.lib \ $(PATH_OBJ)/bs3kit-pae16/bs3kit-pae16.lib \ $(PATH_OBJ)/bs3kit-pae16_32/bs3kit-pae16_32.lib \ $(PATH_OBJ)/bs3kit-pae16_v86/bs3kit-pae16_v86.lib \ $(PATH_OBJ)/bs3kit-pae32/bs3kit-pae32.lib \ $(PATH_OBJ)/bs3kit-pae32_16/bs3kit-pae32_16.lib \ $(PATH_OBJ)/bs3kit-paev86/bs3kit-paev86.lib \ $(PATH_OBJ)/bs3kit-lm16/bs3kit-lm16.lib \ $(PATH_OBJ)/bs3kit-lm32/bs3kit-lm32.lib \ $(PATH_OBJ)/bs3kit-lm64/bs3kit-lm64.lib # BS3Kit template for 32-bit code. TEMPLATE_VBoxBS3KitImg32 = Template for building BS3Kit test images. TEMPLATE_VBoxBS3KitImg32_BLD_TRG = os-agnostic TEMPLATE_VBoxBS3KitImg32_BLD_TRG_ARCH = x86 TEMPLATE_VBoxBS3KitImg32_INSTTYPE = none TEMPLATE_VBoxBS3KitImg32_ASTOOL = VBoxNasm TEMPLATE_VBoxBS3KitImg32_ASOBJSUFF = .o32 TEMPLATE_VBoxBS3KitImg32_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels TEMPLATE_VBoxBS3KitImg32_ASDEFS = ASM_FORMAT_OMF RT_NOINC_SEGMENTS __NASM__ \ BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \ BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16) TEMPLATE_VBoxBS3KitImg32_DEFS = ARCH_BITS=32 IN_BS3KIT TEMPLATE_VBoxBS3KitImg32_DEFS.debug = BS3_STRICT TEMPLATE_VBoxBS3KitImg32_ARTOOL = OPENWATCOM TEMPLATE_VBoxBS3KitImg32_CTOOL = Bs3Ow32 TEMPLATE_VBoxBS3KitImg32_CXXTOOL = Bs3Ow32 TEMPLATE_VBoxBS3KitImg32_CFLAGS = \ -nt=BS3TEXT32 -nd=BS3DATA32 -nc=BS3CLASS32CODE -ecc -q -e125 -wx -zl -mf $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -d+ TEMPLATE_VBoxBS3KitImg32_CXXFLAGS = \ -nt=BS3TEXT32 -nd=BS3DATA32 -nc=BS3CLASS32CODE -ecc -q -e125 -wx -zl -mf $(BS3_OW_DBG_OPT) -s -oa -ob -of -oi -ol -or -os -d+ TEMPLATE_VBoxBS3KitImg32_INCS = $(VBOX_PATH_BS3KIT_SRC) . TEMPLATE_VBoxBS3KitImg32_LDTOOL = VBoxBsUnusedLd # BS3Kit template for 64-bit code. TEMPLATE_VBoxBS3KitImg64 = Template for building BS3Kit test images. TEMPLATE_VBoxBS3KitImg64_BLD_TRG = os-agnostic TEMPLATE_VBoxBS3KitImg64_BLD_TRG_ARCH = amd64 TEMPLATE_VBoxBS3KitImg64_INSTTYPE = none TEMPLATE_VBoxBS3KitImg64_ASTOOL = VBoxNasm TEMPLATE_VBoxBS3KitImg64_ASOBJSUFF = .o64 TEMPLATE_VBoxBS3KitImg64_ASFLAGS = -f obj -g $(BS3KIT_NASM_allow_64_bit) -w+orphan-labels TEMPLATE_VBoxBS3KitImg64_ASDEFS = ASM_FORMAT_OMF ASM_CALL64_MSC RT_NOINC_SEGMENTS __NASM__ \ BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \ BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16) TEMPLATE_VBoxBS3KitImg64_DEFS = IN_BS3KIT ARCH_BITS=64 TEMPLATE_VBoxBS3KitImg64_DEFS.debug = BS3_STRICT TEMPLATE_VBoxBS3KitImg64_ARTOOL = OPENWATCOM TEMPLATE_VBoxBS3KitImg64_INCS = $(VBOX_PATH_BS3KIT_SRC) . if1of ($(KBUILD_HOST), win) ifndef TOOL_VCC100AMD64 # For win.x86 builds. include $(KBUILD_PATH)/tools/$(VBOX_VCC_TOOL_STEM)AMD64.kmk endif TEMPLATE_VBoxBS3KitImg64_CTOOL := Bs3Vcc64 TEMPLATE_VBoxBS3KitImg64_CXXTOOL := Bs3Vcc64 TEMPLATE_VBoxBS3KitImg64_CFLAGS = -Z7 -O1 -Oi -GF -GS- -Gy- -Gs65536 TEMPLATE_VBoxBS3KitImg64_CXXFLAGS = -Z7 -O1 -Oi -GF -GS- -Gy- -Gs65536 else TEMPLATE_VBoxBS3KitImg64_CTOOL := Bs3Gcc64Elf64 TEMPLATE_VBoxBS3KitImg64_CXXTOOL := Bs3Gcc64Elf64 # Note! -mx32 would be exactly what we needed here, however it causes internal compiler errors with 4.8.4 on gentoo. TEMPLATE_VBoxBS3KitImg64_CFLAGS = -m64 -maccumulate-outgoing-args -g -Os -fno-omit-frame-pointer $(VBOX_GCC_fno-stack-protector) $(VBOX_GCC_WARN_PEDANTIC_C) \ -msoft-float -fno-exceptions -mno-sse -mno-mmx -mno-sse2 -mno-3dnow $(VBOX_GCC_fno-stack-protector) TEMPLATE_VBoxBS3KitImg64_CXXFLAGS = -m64 -maccumulate-outgoing-args -g -Os -fno-omit-frame-pointer $(VBOX_GCC_fno-stack-protector) $(VBOX_GCC_WARN_PEDANTIC_CXX) \ -msoft-float -fno-exceptions -mno-sse -mno-mmx -mno-sse2 -mno-3dnow $(VBOX_GCC_fno-stack-protector) endif TEMPLATE_VBoxBS3KitImg64_LDTOOL = VBoxBsUnusedLd # BS3Kit template for the bootsector. TEMPLATE_VBoxBS3KitBS = Template for building BS3Kit test images. TEMPLATE_VBoxBS3KitBS_BLD_TRG = os-agnostic TEMPLATE_VBoxBS3KitBS_BLD_TRG_ARCH = x86 TEMPLATE_VBoxBS3KitBS_INST = $(INST_VALIDATIONKIT)bootsectors/ TEMPLATE_VBoxBS3KitBS_INSTTYPE = none TEMPLATE_VBoxBS3KitBS_BINSUFF = .img TEMPLATE_VBoxBS3KitBS_MODE = 0644 TEMPLATE_VBoxBS3KitBS_ASTOOL = YASM TEMPLATE_VBoxBS3KitBS_ASFLAGS = -f bin --mapfile TEMPLATE_VBoxBS3KitBS_ASDEFS = ASM_FORMAT_BIN RT_NOINC_SEGMENTS ARCH_BITS=16 __YASM__ \ BS3CLASS16CODE=$(BS3KIT_CLASS_CODE16) BS3KIT_CLASS_DATA16=$(BS3KIT_CLASS_DATA16) \ BS3KIT_GRPNM_DATA16=$(BS3KIT_GRPNM_DATA16) BS3KIT_CLASS_BSS16=$(BS3KIT_CLASS_BSS16) TEMPLATE_VBoxBS3KitBS_INCS = $(VBOX_PATH_BS3KIT_SRC) . TEMPLATE_VBoxBS3KitBS_LDTOOL = VBoxBsCpLd # # Extends VBoxBS3KitImg # User must starts SOURCES with: $(VBOX_PATH_BS3KIT_SRC)/bs3-first-dosexe.asm ## disable 1014, 1080, 1150 # TEMPLATE_VBoxBS3KitUtil = Utility using bs3kit code. TEMPLATE_VBoxBS3KitUtil_EXTENDS = VBoxBS3KitImg TEMPLATE_VBoxBS3KitUtil_BINSUFF = .exe TEMPLATE_VBoxBS3KitUtil_DEFS = $(TEMPLATE_VBoxBS3KitImg_DEFS) BS3_IS_DOS_EXE TEMPLATE_VBoxBS3KitUtil_CFLAGS = $(filter-out -zl,$(TEMPLATE_VBoxBS3KitImg_CFLAGS)) TEMPLATE_VBoxBS3KitUtil_CXXFLAGS = $(filter-out -zl,$(TEMPLATE_VBoxBS3KitImg_CXXFLAGS)) TEMPLATE_VBoxBS3KitUtil_LDFLAGS = system dos \ debug $(BS3_OW_DBG_LDOPT) all \ option quiet, map, statics, verbose, symfile \ disable 1080 \ order \ clname $(BS3KIT_CLASS_CODE16) \ segment BEGTEXT \ segment BS3TEXT16 \ segment _TEXT \ segment BS3TEXT16_NEARSTUBS \ segment BS3TEXT16_FARSTUBS \ segment BS3TEXT16_END \ clname BS3SYSTEM16 \ segment BS3SYSTEM16 \ \ clname BEGDATA \ segment _NULL \ segment _AFTERNULL \ clname DATA \ $(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \ segment BS3DATA16 \ segment BS3DATA16CONST \ segment CONST \ segment BS3DATA16CONST2 \ segment CONST2 \ ,\ segment CONST \ segment CONST2 \ ) \ segment _DATA \ segment XIB \ segment XI \ segment XIE \ segment YIB \ segment YI \ segment YIE \ segment STRINGS \ $(if-expr "$(BS3KIT_SEGNM_DATA16)" == "", \ segment BS3DATA16_DATA \ ,) \ segment DATA \ clname BSS \ segment _BSS \ segment BSS \ segment BS3DATA16_END \ clname STACK \ segment STACK \ \ clname FAR_DATA \ $(if-expr "$(BS3KIT_SEGNM_DATA16)" != "", \ segment BS3DATA16 \ segment BS3DATA16_DATA \ segment BS3DATA16CONST \ segment BS3DATA16CONST2 \ segment FAR_DATA \ segment BS3DATA16_END \ ,\ segment FAR_DATA \ )\ segment BS3DATA32 \ segment BS3DATA32CONST \ segment BS3DATA32CONST2 \ segment BS3DATA32_DATA \ segment BS3DATA32_BSS \ segment BS3DATA32_END \ \ segment BS3DATA64 \ segment BS3DATA64CONST \ segment BS3DATA64_BSS \ segment BS3DATA64_END \ clname BS3CLASS16RMCODE \ segment BS3RMCODE16_START \ segment BS3RMCODE16 \ segment BS3RMCODE16_END \ clname BS3CLASS16X0CODE \ segment BS3X0CODE16_START \ segment BS3X0CODE16 \ segment BS3X0CODE16_END \ clname BS3CLASS16X1CODE \ segment BS3X1CODE16_START \ segment BS3X1CODE16 \ segment BS3X1CODE16_END \ clname BS3CLASS32CODE \ segment BS3TEXT32 \ segment BS3TEXT32_END \ clname BS3CLASSSEPARATE32AND64BITCODE \ segment BS3SEPARATE32AND64BITCODE \ segment BS3SEPARATE32AND64BITCODE_END \ clname BS3CLASS64CODE \ segment BS3TEXT64 \ segment BS3TEXT64_END # clname BS3FLAT segaddr=0x0000 \ # segment BS3FLAT segaddr=0x0000 TEMPLATE_VBoxBS3KitUtil_LNK_DEPS = $(NO_SUCH_VARIABLE) TEMPLATE_VBoxBS3KitUtil_POST_CMDS = $(NO_SUCH_VARIABLE)