; $Id: bootsector2-cpu-xcpt-1-template.mac 69111 2017-10-17 14:26:02Z vboxsync $ ;; @file ; Bootsector test for basic exceptions - multi mode template. ; ; ; Copyright (C) 2007-2017 Oracle Corporation ; ; This file is part of VirtualBox Open Source Edition (OSE), as ; available from http://www.virtualbox.org. This file is free software; ; you can redistribute it and/or modify it under the terms of the GNU ; General Public License (GPL) as published by the Free Software ; Foundation, in version 2 as it comes in the "COPYING" file of the ; VirtualBox OSE distribution. VirtualBox OSE is distributed in the ; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ; ; The contents of this file may alternatively be used under the terms ; of the Common Development and Distribution License Version 1.0 ; (CDDL) only, as it comes in the "COPYING.CDDL" file of the ; VirtualBox OSE distribution, in which case the provisions of the ; CDDL are applicable instead of those of the GPL. ; ; You may elect to license modified versions of this file under the ; terms and conditions of either the GPL or the CDDL or both. ; %include "bootsector2-template-header.mac" ;******************************************************************************* ;* Defined Constants And Macros * ;******************************************************************************* ;; ; Some 32/64 macros. ; %if TMPL_BITS == 32 %define bs2Idt_BP bs2Idt32bit_BP %define MY_R0_CS BS2_SEL_CS32 %define MY_R1_CS BS2_SEL_R1_CS32 %define MY_R2_CS BS2_SEL_R2_CS32 %define MY_R3_CS BS2_SEL_R3_CS32 %define MY_R0_DS BS2_SEL_DS32 %define MY_R1_DS BS2_SEL_R1_DS32 %define MY_R2_DS BS2_SEL_R2_DS32 %define MY_R3_DS BS2_SEL_R3_DS32 %define MY_R0_SS BS2_SEL_SS32 %define MY_R1_SS BS2_SEL_R1_SS32 %define MY_R2_SS BS2_SEL_R2_SS32 %define MY_R3_SS BS2_SEL_R3_SS32 %else %define bs2Idt_BP bs2Idt64bit_BP %define MY_R0_CS BS2_SEL_CS64 %define MY_R1_CS BS2_SEL_R1_CS64 %define MY_R2_CS BS2_SEL_R2_CS64 %define MY_R3_CS BS2_SEL_R3_CS64 %define MY_R0_DS BS2_SEL_DS64 %define MY_R1_DS BS2_SEL_R1_DS64 %define MY_R2_DS BS2_SEL_R2_DS64 %define MY_R3_DS BS2_SEL_R3_DS64 %define MY_R0_SS BS2_SEL_SS64 %define MY_R1_SS BS2_SEL_R1_SS64 %define MY_R2_SS BS2_SEL_R2_SS64 %define MY_R3_SS BS2_SEL_R3_SS64 %endif %ifdef TMPL_64BIT %assign MY_IS_64BIT 1 %else %assign MY_IS_64BIT 0 %endif ;******************************************************************************* ;* Global Variables * ;******************************************************************************* %ifndef CPU_XCPT_1_GLOBALS %define CPU_XCPT_1_GLOBALS g_szWrongIfStateFmt: db 'Wrong IF state (0x%RX32) on line 0x%RX32', 0 g_szWrongHandlerCsFmt: db 'Wrong handler CS=%RX16, expected %RX16 (line 0x%RX32)', 0 g_szWrongCurCsFmt: db 'Wrong CS=%RX16, expected %RX16 (line 0x%RX32)', 0 g_szWrongCurSRegFmt_fs: db 'Wrong FS=%RX16, expected %RX16 (line 0x%RX32)', 0 g_szWrongCurSRegFmt_ss: db 'Wrong SS=%RX16, expected %RX16 (line 0x%RX32)', 0 ;; ; Asserts a test. ; ; @param %1 First cmp operand. ; @param %2 First cmp operand. ; @param %3 Which kind of conditional jump to make ; @param %4 The message to print (format string, no arguments please). ; %macro ASSERT_SIMPLE 4 cmp %1, %2 %3 %%.ok push dword __LINE__ %ifdef TMPL_16BIT push ds %endif push %%.s_szMsg call TMPL_NM_CMN(TestFailedF) add xSP, sCB*2 jmp %%.ok %%.s_szMsg: db %4, " (0x%RX32)", 0 %%.ok: %endmacro ;; ; Asserts that the IF flag is set or clear when the trap handler was called. ; ; @param 1 jnz or jz. ; ; @uses rax, flags, and stack. ; %macro ASSERT_TRAP_EFLAGS_IF 1 test word [g_u64LastTrapHandlerRFlags xWrtRIP], X86_EFL_IF %1 %%.ok %ifdef TMPL_LM64 push __LINE__ push qword [g_u64LastTrapHandlerRFlags xWrtRIP] lea rax, [g_szWrongIfStateFmt wrt RIP] push rax call TMPL_NM_CMN(TestFailedF) add xSP, 24 %elifdef TMPL_16 push dword __LINE__ push dword [g_u64LastTrapHandlerRFlags] push cs push g_szWrongIfStateFmt call TMPL_NM_CMN(TestFailedF) add xSP, 12 %else push __LINE__ push dword [g_u64LastTrapHandlerRFlags] push g_szWrongIfStateFmt call TMPL_NM_CMN(TestFailedF) add xSP, 12 %endif %%.ok: %endmacro ;; ; Asserts that a certain CS value when the trap handler was called. ; ; @param 1 The CS value. ; ; @uses rax, flags, and stack. ; %macro ASSERT_TRAP_CS_VALUE 1 cmp word [g_u16LastTrapHandlerCS xWrtRIP], (%1) je %%.ok %ifdef TMPL_LM64 push __LINE__ push (%1) movzx eax, word [g_u16LastTrapHandlerCS xWrtRIP] push rax lea rax, [g_szWrongHandlerCsFmt wrt RIP] push rax call TMPL_NM_CMN(TestFailedF) add xSP, 32 %elifdef TMPL_16 push dword __LINE__ push word (%1) push word [g_u16LastTrapHandlerCS] push cs push g_szWrongHandlerCsFmt call TMPL_NM_CMN(TestFailedF) add xSP, 12 %else push __LINE__ push (%1) movzx eax, word [g_u16LastTrapHandlerCS] push eax push g_szWrongHandlerCsFmt call TMPL_NM_CMN(TestFailedF) add xSP, 16 %endif %%.ok: %endmacro ;; ; Asserts that a certain CS value right now, CS being loaded in BX. ; ; @param bx The CS value. ; @param 1 The expected CS value. ; ; @uses rax, flags, and stack. ; %macro ASSERT_CUR_CS_VALUE_IN_BX 1 cmp bx, (%1) je %%.ok %ifdef TMPL_LM64 push __LINE__ push (%1) push rbx lea rax, [g_szWrongCurCsFmt wrt RIP] push rax call TMPL_NM_CMN(TestFailedF) add xSP, 32 %elifdef TMPL_16 push dword __LINE__ push word (%1) push bx push g_szWrongCurCsFmt call TMPL_NM_CMN(TestFailedF) add xSP, 12 %else push __LINE__ push (%1) push ebx push g_szWrongCurCsFmt call TMPL_NM_CMN(TestFailedF) add xSP, 16 %endif %%.ok: %endmacro ;; ; Asserts that the given segment register has a certain value right now. ; ; @param 1 The segment register ; @param 2 The value. ; ; @uses rax, flags, and stack. ; %macro ASSERT_CUR_SREG_VALUE 2 mov ax, %1 cmp ax, (%2) je %%.ok %ifdef TMPL_LM64 push __LINE__ push (%2) push rax lea rax, [g_szWrongCurSRegFmt_ %+ %1 wrt RIP] push rax call TMPL_NM_CMN(TestFailedF) add xSP, 32 %elifdef TMPL_16 push dword __LINE__ push word (%2) push ax push g_szWrongCurSRegFmt_ %+ %1 call TMPL_NM_CMN(TestFailedF) add xSP, 12 %else push __LINE__ push (%2) push eax push g_szWrongCurSRegFmt_ %+ %1 call TMPL_NM_CMN(TestFailedF) add xSP, 16 %endif %%.ok: %endmacro %endif ;; ; Checks different gate types. ; BEGINPROC TMPL_NM(TestGateType) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Check that int3 works and save the IDTE before making changes. ; ; We'll be changing X86DESCGATE.u4Type, which starts at bit 0x28 (that ; is byte 5) and is 4-bit wide, and X86DESCGATE.u1DescType, which is ; at bit 2c. ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check that int3 works before we start messing around... %ifdef TMPL_LM64 push qword [bs2Idt_BP xWrtRIP] push qword [bs2Idt_BP + 8 xWrtRIP] %else push dword [bs2Idt_BP xWrtRIP] push dword [bs2Idt_BP + 4 xWrtRIP] %endif mov xDI, xSP ; for catching stack errors ; ; Check all kinds of none system selectors first (they should all GP(3+IDT)) ; %assign u4Type 0 %rep 16 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], RT_BIT(4) | u4Type BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 %assign u4Type (u4Type + 1) %endrep ; ; Illegal system types. ; %ifdef TMPL_LM64 %assign u4Type 0 %rep 14 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], u4Type BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 %assign u4Type (u4Type + 1) %endrep %else and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_286_TSS_AVAIL BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_LDT BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_286_TSS_BUSY BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_286_CALL_GATE BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED2 BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TSS_AVAIL BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED3 BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TSS_BUSY BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED4 BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_CALL_GATE BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 %endif ; ; Legal types. ; pushf sti ; make sure interrupts are enabled. %ifdef TMPL_LM64 and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], AMD64_SEL_TYPE_SYS_INT_GATE BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_EFLAGS_IF jz and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], AMD64_SEL_TYPE_SYS_TRAP_GATE BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_EFLAGS_IF jnz %else and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_INT_GATE BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_EFLAGS_IF jz and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TRAP_GATE BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_EFLAGS_IF jnz ;; @todo X86_SEL_TYPE_SYS_TASK_GATE, X86_SEL_TYPE_SYS_286_INT_GATE, X86_SEL_TYPE_SYS_286_TRAP_GATE, X86_SEL_TYPE_SYS_386_CALL_GATE %endif popf ; ; Check that a not-present gate GPs. The not-present bit is 0x2f. ; and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h %ifdef TMPL_LM64 or byte [bs2Idt_BP + 5 xWrtRIP], AMD64_SEL_TYPE_SYS_INT_GATE %else or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TRAP_GATE %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2Idt_BP + 5 xWrtRIP], 07fh BS2_TRAP_INSTR X86_XCPT_NP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; Restore the descriptor and make sure it works. ; ASSERT_SIMPLE xDI, xSP, je, "Someone busted xSP during this test." %ifdef TMPL_LM64 pop qword [bs2Idt_BP + 8 xWrtRIP] pop qword [bs2Idt_BP xWrtRIP] %else pop dword [bs2Idt_BP + 4 xWrtRIP] pop dword [bs2Idt_BP xWrtRIP] %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Done. ; call TMPL_NM_CMN(TestSubDone) pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', IDTE type checks', 0 ENDPROC TMPL_NM(TestGateType) ;; ; Checks different code selector types. ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestCodeSelector) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Modify the first extra selector to be various kinds of invalid code ; selectors. ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check that int3 works before we start messing around... %ifdef TMPL_LM64 push qword [bs2Idt_BP xWrtRIP] push qword [bs2Idt_BP + 8 xWrtRIP] %else push dword [bs2Idt_BP xWrtRIP] push dword [bs2Idt_BP + 4 xWrtRIP] %endif mov ecx, [bs2Gdt + MY_R0_CS xWrtRIP] mov [bs2GdtSpare0 xWrtRIP], ecx mov ecx, [bs2Gdt + MY_R0_CS + 4 xWrtRIP] mov [bs2GdtSpare0 + 4 xWrtRIP], ecx ; GdtSpare0 is a copy of the CS descriptor now. mov word [bs2Idt_BP + 2 xWrtRIP], BS2_SEL_SPARE0 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check again to make sure the CS copy is fine. ; Data selector (u4Type starts at bit 0x28, that is byte 5) . and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RO BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RO_ACC BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RW BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RW_ACC BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RO_DOWN BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RO_DOWN_ACC BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RW_DOWN BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RW_DOWN_ACC BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 ; Executable selector types (works fine). and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_EO BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_EO_ACC BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_EO_CONF BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_EO_CONF_ACC BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_CONF BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_CONF_ACC BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Test with the code selector set to NULL. ; mov word [bs2Idt_BP + 2 xWrtRIP], 0 BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 mov word [bs2Idt_BP + 2 xWrtRIP], 1 BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 mov word [bs2Idt_BP + 2 xWrtRIP], 2 BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 mov word [bs2Idt_BP + 2 xWrtRIP], 3 BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 mov word [bs2Idt_BP + 2 xWrtRIP], BS2_SEL_SPARE0 ; restore our CS ; ; Test with the code selector marked as not present but otherwise valid. ; and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 07fh BS2_TRAP_INSTR X86_XCPT_NP, BS2_SEL_SPARE0, int3 ; ; Invalid CS selector and not present, we should get a GP. ; Intel states that the present bit is checked after the type. ; and byte [bs2GdtSpare0 + 5 xWrtRIP], 070h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RW_DOWN_ACC BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 %ifdef TMPL_LM64 ; Long mode variations on invalid (L and D bits) pitted against NP. and byte [bs2GdtSpare0 + 5 xWrtRIP], 070h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC and byte [bs2GdtSpare0 + 6 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) ; (0x35=u1Long, 0x36=u1DefBig) = (0, 0) BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 or byte [bs2GdtSpare0 + 6 xWrtRIP], RT_BIT(6) ; (0x35=u1Long, 0x36=u1DefBig) = (0, 1) BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 or byte [bs2GdtSpare0 + 6 xWrtRIP], RT_BIT(5) ; (0x35=u1Long, 0x36=u1DefBig) = (1, 1) BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 6 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2GdtSpare0 + 6 xWrtRIP], RT_BIT(5) ; restored %endif and byte [bs2GdtSpare0 + 5 xWrtRIP], 070h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC | 080h ; restore CS to present & valid. BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; make sure this is so. ; ; Check the CS DPL vs IDTE DPL. ; X86DESCGENERIC.u2Dpl is at bit 0x2d (i.e. in byte 5). ; and byte [bs2GdtSpare0 + 5 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2GdtSpare0 + 5 xWrtRIP], 0 ; CS.DPL == 0 == CPL BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2GdtSpare0 + 5 xWrtRIP], 1 << 5 ; CS.DPL == 1 < CPL BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2GdtSpare0 + 5 xWrtRIP], 2 << 5 ; CS.DPL == 2 < CPL BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 and byte [bs2GdtSpare0 + 5 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2GdtSpare0 + 5 xWrtRIP], 3 << 5 ; CS.DPL == 3 < CPL BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 ; Restore. and byte [bs2GdtSpare0 + 5 xWrtRIP], 010h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC | 080h ; restore CS to present, valid and DPL=0 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; make sure it's restored. ; ; Is RPL is ignored? Yes, it is. ; and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL ; RPL = 0 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL or byte [bs2Idt_BP + 2 xWrtRIP], 1 ; RPL = 1 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL or byte [bs2Idt_BP + 2 xWrtRIP], 2 ; RPL = 2 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL or byte [bs2Idt_BP + 2 xWrtRIP], 3 ; RPL = 3 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 ; ; Conforming CS. ; or byte [bs2Idt_BP + 5 xWrtRIP], (3 << 5) ; IDTE.DPL = 3 and byte [bs2GdtSpare0 + 5 xWrtRIP], 090h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_CONF_ACC ; CS.DPL=0, code, read, conforming call TMPL_NM_CMN(Bs2ToRing1) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 1 call TMPL_NM_CMN(Bs2ToRing2) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 2 call TMPL_NM_CMN(Bs2ToRing3) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 3 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 0 ; RPL is ignored. Only CPL matters. or byte [bs2Idt_BP + 2 xWrtRIP], (3 << 5) ; IDTE.CS.RPL=3 call TMPL_NM_CMN(Bs2ToRing2) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 2 and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL or byte [bs2Idt_BP + 2 xWrtRIP], (1 << 5) ; IDTE.CS.RPL=1 call TMPL_NM_CMN(Bs2ToRing2) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 2 and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL or byte [bs2Idt_BP + 2 xWrtRIP], (2 << 5) ; IDTE.CS.RPL=2 call TMPL_NM_CMN(Bs2ToRing2) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 call TMPL_NM_CMN(Bs2ToRing0) ASSERT_TRAP_CS_VALUE BS2_SEL_SPARE0 | 2 ; Change the CS.DPL to 1 and try it from ring-0. and byte [bs2GdtSpare0 + 5 xWrtRIP], 09fh or byte [bs2GdtSpare0 + 5 xWrtRIP], (1 << 5) ; CS.DPL=1 BS2_TRAP_INSTR X86_XCPT_GP, BS2_SEL_SPARE0, int3 ; Restore. and word [bs2Idt_BP + 2 xWrtRIP], X86_SEL_MASK_OFF_RPL and byte [bs2Idt_BP + 5 xWrtRIP], 0x9f ; IDTE.DPL=0 and byte [bs2GdtSpare0 + 5 xWrtRIP], 010h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_ER_ACC | 080h ; restore CS to present, valid and DPL=0 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; make sure it's restored. ; ; Limit / canonical checks. ; ; Messing with X86DESCGENERIC.u16LimitLow which is at bit 0, ; X86DESCGENERIC.u4LimitHigh which is at bit 0x30, and ; X86DESCGENERIC.u1Granularity which is at bit 0x37. ; mov word [bs2GdtSpare0 xWrtRIP], 0010h and byte [bs2GdtSpare0 + 6 xWrtRIP], 070h ; setting limit to 0x10, ASSUMES IDTE.off > 0x10 %ifdef TMPL_LM64 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 %else BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 %endif %ifdef TMPL_LM64 or dword [bs2Idt_BP + 8 xWrtRIP], 0x007f7f33 BS2_TRAP_INSTR X86_XCPT_GP, 0, int3 %endif ; Who takes precedence? CS NP or the above GP? NP does. and byte [bs2GdtSpare0 + 5 xWrtRIP], 07fh BS2_TRAP_INSTR X86_XCPT_NP, BS2_SEL_SPARE0, int3 %ifdef TMPL_LM64 ; Who takes precedence? IDTE NP or the not canoncial GP? NP does. or byte [bs2GdtSpare0 + 5 xWrtRIP], 80h and byte [bs2Idt_BP + 5 xWrtRIP], 07fh BS2_TRAP_INSTR X86_XCPT_NP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 %endif ; ; Restore the descriptor and make sure it works. ; %ifdef TMPL_LM64 pop qword [bs2Idt_BP + 8 xWrtRIP] pop qword [bs2Idt_BP xWrtRIP] %else pop dword [bs2Idt_BP + 4 xWrtRIP] pop dword [bs2Idt_BP xWrtRIP] %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Done. ; call TMPL_NM_CMN(TestSubDone) pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', IDTE CS checks', 0 ENDPROC TMPL_NM(TestCodeSelector) ;; ; Checks that the IDTE type is checked before the CS type. ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestCheckOrderCsTypeVsIdteType) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Check the int3 and save its IDTE. ; ; We'll be changing X86DESCGATE.u4Type, which starts at bit 0x28 (that ; is byte 5) and is 4-bit wide, and X86DESCGATE.u1DescType, which is ; at bit 2c. ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check that int3 works before we start messing around... %ifdef TMPL_LM64 push qword [bs2Idt_BP xWrtRIP] push qword [bs2Idt_BP + 8 xWrtRIP] %else push dword [bs2Idt_BP xWrtRIP] push dword [bs2Idt_BP + 4 xWrtRIP] %endif ; ; Make a copy of our CS descriptor into spare one and make INT3 use it. ; mov ecx, [bs2Gdt + MY_R0_CS xWrtRIP] mov [bs2GdtSpare0 xWrtRIP], ecx mov ecx, [bs2Gdt + MY_R0_CS + 4 xWrtRIP] mov [bs2GdtSpare0 + 4 xWrtRIP], ecx ; GdtSpare0 is a copy of the CS descriptor now. mov word [bs2Idt_BP + 2 xWrtRIP], BS2_SEL_SPARE0 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check again to make sure the CS copy is fine. ; ; Make both the IDTE type and CS invalid, we should end up with a IDT GP not the CS one. ; CS = data selector and IDTE invalid 0 type. ; and byte [bs2GdtSpare0 + 5 xWrtRIP], 0f0h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_RO and byte [bs2Idt_BP + 5 xWrtRIP], 0e0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; Make the IDTE not-present but otherwise fine, keeping CS invalid. ; and byte [bs2Idt_BP + 5 xWrtRIP], 070h %ifdef TMPL_LM64 or byte [bs2Idt_BP + 5 xWrtRIP], AMD64_SEL_TYPE_SYS_INT_GATE %else or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TRAP_GATE %endif BS2_TRAP_INSTR X86_XCPT_NP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; Make the CS not present as well. ; and byte [bs2GdtSpare0 + 5 xWrtRIP], 070h or byte [bs2GdtSpare0 + 5 xWrtRIP], X86_SEL_TYPE_EO BS2_TRAP_INSTR X86_XCPT_NP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; CS not present, IDTE invalid but present. ; and byte [bs2Idt_BP + 5 xWrtRIP], 0f0h or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_UNDEFINED | 0x80 BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; CS NULL, IDTE invalid but present. ; mov word [bs2Idt_BP + 2 xWrtRIP], 0 BS2_TRAP_INSTR X86_XCPT_GP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; CS NULL, IDTE valid but not present. ; and byte [bs2Idt_BP + 5 xWrtRIP], 070h %ifdef TMPL_LM64 or byte [bs2Idt_BP + 5 xWrtRIP], AMD64_SEL_TYPE_SYS_INT_GATE %else or byte [bs2Idt_BP + 5 xWrtRIP], X86_SEL_TYPE_SYS_386_TRAP_GATE %endif BS2_TRAP_INSTR X86_XCPT_NP, (3 << X86_TRAP_ERR_SEL_SHIFT) | X86_TRAP_ERR_IDT, int3 ; ; Restore the descriptor and make sure it works. ; %ifdef TMPL_LM64 pop qword [bs2Idt_BP + 8 xWrtRIP] pop qword [bs2Idt_BP xWrtRIP] %else pop dword [bs2Idt_BP + 4 xWrtRIP] pop dword [bs2Idt_BP xWrtRIP] %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Done. ; call TMPL_NM_CMN(TestSubDone) pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', IDTE.type before CS.type', 0 ENDPROC TMPL_NM(TestCheckOrderCsTypeVsIdteType) ;; ; Checks stack switching behavior. ; ; @uses none ; BEGINPROC TMPL_NM(TestStack) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI pushf cli mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Check the int3, save its IDTE, then make it ring-3 accessible. ; ; X86DESCGENERIC.u2Dpl is at bit 0x2d (i.e. in byte 5). ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check that int3 works before we start messing around... %ifdef TMPL_LM64 push qword [bs2Idt_BP xWrtRIP] push qword [bs2Idt_BP + 8 xWrtRIP] %else push dword [bs2Idt_BP xWrtRIP] push dword [bs2Idt_BP + 4 xWrtRIP] %endif and byte [bs2Idt_BP + 5 xWrtRIP], ~(RT_BIT(5) | RT_BIT(6)) or byte [bs2Idt_BP + 5 xWrtRIP], 3 << 5 ; DPL == 3 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; In ring-0 no stack switching is performed. ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov xBX, [g_u64LastTrapHandlerRSP] %ifdef TMPL_64BIT mov rax, rsp and rax, ~15 sub rax, 7*8 %else lea eax, [esp - 5*4] %endif ASSERT_SIMPLE sAX, xBX, je, "Wrong xSP value for ring-0 -> ring-0 int3." mov bx, [g_u16LastTrapHandlerSS] mov ax, ss ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-0 -> ring-0 int3." ; ; Switch to ring-1 and watch stack switching take place. ; call TMPL_NM_CMN(Bs2ToRing1) BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov xBX, [g_u64LastTrapHandlerRSP] mov sAX, BS2_R0_STACK_ADDR %ifdef TMPL_64BIT and rax, ~15 sub rax, 7*8 %else sub eax, 7*4 %endif ASSERT_SIMPLE sAX, xBX, je, "Wrong xSP value for ring-1 -> ring-0 int3." mov bx, [g_u16LastTrapHandlerSS] %ifdef TMPL_64BIT mov ax, 0 %else mov ax, MY_R0_SS %endif ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-1 -> ring-0 int3." call TMPL_NM_CMN(Bs2ToRing0) ; ; Missaligned stack, ring-0 -> ring-0. ; mov xDI, xSP ; save the stack pointer. %rep 15 sub xSP, 1h BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov xBX, [g_u64LastTrapHandlerRSP] %ifdef TMPL_64BIT mov rax, rsp and rax, ~15 sub rax, 7*8 %else lea eax, [esp - 5*4] %endif ASSERT_SIMPLE sAX, xBX, je, "Wrong xSP value for ring-0 -> ring-0 int3, w/ unaligned stack." mov bx, [g_u16LastTrapHandlerSS] mov ax, ss ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-0 -> ring-0 int3, w/ unaligned stack." %endrep mov xSP, xDI ; restore the stack pointer. ; ; Missaligned stack, ring-1 -> ring-0. ; call TMPL_NM_CMN(Bs2ToRing1) mov sSI, BS2_R0_STACK_ADDR - 16 %rep 16 add sSI, 1 %ifdef TMPL_64BIT mov [bs2Tss64Bit + 4], sSI %else mov [bs2Tss32Bit + 4], sSI %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov xBX, [g_u64LastTrapHandlerRSP] mov sAX, sSI %ifdef TMPL_64BIT and rax, ~15 sub rax, 7*8 %else sub eax, 7*4 %endif ASSERT_SIMPLE sAX, xBX, je, "Wrong xSP value for ring-1 -> ring-0 int3, w/ unaligned ring-0 stack." mov bx, [g_u16LastTrapHandlerSS] %ifdef TMPL_64BIT mov ax, 0 %else mov ax, MY_R0_SS %endif ASSERT_SIMPLE sAX, xBX, je, "Wrong SS value for ring-1 -> ring-0 int3, w/ unaligned ring-0 stack." %endrep call TMPL_NM_CMN(Bs2ToRing0) %ifdef TMPL_64BIT ; ; Stack table (AMD64 only), ring-0 -> ring-0. ; and byte [bs2Idt_BP + 4], ~7 or byte [bs2Idt_BP + 4], 3 ; IDTE.IST=3 mov rdi, [bs2Tss64Bit + X86TSS64.ist3] mov rsi, BS2_R0_STACK_ADDR - 128 %rep 16 sub rsi, 1h mov [bs2Tss64Bit + X86TSS64.ist3], rsi BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov rbx, [g_u64LastTrapHandlerRSP] mov rax, rsi and rax, ~15 sub rax, 7*8 ASSERT_SIMPLE rax, rbx, je, "Wrong xSP value for ring-0 -> ring-0 int3, w/ unaligned IST." mov bx, [g_u16LastTrapHandlerSS] mov ax, ss ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-0 -> ring-0 int3, w/ unaligned IST." %endrep ; Continue in ring-1,2,3. %assign uCurRing 1 %rep 3 call TMPL_NM_CMN(Bs2ToRing %+ uCurRing) %rep 16 sub rsi, 1h mov [bs2Tss64Bit + X86TSS64.ist3], rsi BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov rbx, [g_u64LastTrapHandlerRSP] mov rax, rsi and rax, ~15 sub rax, 7*8 ASSERT_SIMPLE rax, rbx, je, "Wrong xSP value for ring-X -> ring-0 int3, w/ unaligned IST." mov bx, [g_u16LastTrapHandlerSS] mov ax, 0 ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-X -> ring-0 int3, w/ unaligned IST." %endrep call TMPL_NM_CMN(Bs2ToRing0) %assign uCurRing (uCurRing + 1) %endrep mov [bs2Tss64Bit + X86TSS64.ist3], rdi ; restore original value and byte [bs2Idt_BP + 4], ~7 ; IDTE.IST=0 ; ; Check SS handling when interrupting 32-bit code with a 64-bit handler. ; call Bs2Thunk_lm64_lm32 BITS 32 BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov bx, [g_u16LastTrapHandlerSS] mov ax, ss call Bs2Thunk_lm32_lm64 BITS 64 ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-0-32 -> ring-0-64 int3, w/ 32-bit stack." call Bs2Thunk_lm64_lm32 BITS 32 mov cx, ss mov ax, BS2_SEL_SS16 mov ss, ax BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 mov bx, [g_u16LastTrapHandlerSS] mov ss, cx call Bs2Thunk_lm32_lm64 BITS 64 ASSERT_SIMPLE ax, bx, je, "Wrong SS value for ring-0-32 -> ring-0-64 int3, w/ 16-bit stack." %endif ; TMPL_64BIT ; ; Restore the descriptor and make sure it works. ; %ifdef TMPL_LM64 pop qword [bs2Idt_BP + 8 xWrtRIP] pop qword [bs2Idt_BP xWrtRIP] %else pop dword [bs2Idt_BP + 4 xWrtRIP] pop dword [bs2Idt_BP xWrtRIP] %endif BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Done. ; call TMPL_NM_CMN(TestSubDone) popf pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', Stack switching', 0 ENDPROC TMPL_NM(TestStack) ;; ; Loads MY_R0_CS into CS. ; ; @uses stack, cs, flags ; BEGINPROC TMPL_NM(TestLoadMyCS) push 0 push xAX ; Make it a far return with MY_R0_CS + CPL. mov xAX, [xSP + xCB*2] mov [xSP + xCB*1], xAX mov xAX, ss %ifdef TMPL_64BIT sub xAX, BS2_SEL_GRP_SS64 - BS2_SEL_GRP_CS64 %elifdef TMPL_32BIT sub xAX, BS2_SEL_GRP_SS32 - BS2_SEL_GRP_CS32 %elifdef TMPL_16BIT sub xAX, BS2_SEL_GRP_SS16 - BS2_SEL_GRP_CS16 %else TMPL_xxBIT is not defined %endif mov [xSP + xCB*2], xAX pop xAX retf ENDPROC TMPL_NM(TestLoadMyCS) ;; ; Checks our understanding of how conforming segments are handled. ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestConforming) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) ; ; Check the int3. ; BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; check that int3 works before we start messing around... mov xDI, xSP ; save the stack pointer. sub xSP, 20h ; ; In this test we will do various experiments with code using a ; conforming CS. The main purpose is to check that CS.RPL is always the ; same as CPL, despite earlier beliefs to the contrary. Because if it ; is different, iret cannot dermine the CPL to return to among other ; interesting problems. ; mov ecx, [bs2Gdt + MY_R0_CS xWrtRIP] mov [bs2GdtSpare0 xWrtRIP], ecx mov ecx, [bs2Gdt + MY_R0_CS + 4 xWrtRIP] mov [bs2GdtSpare0 + 4 xWrtRIP], ecx ; GdtSpare0 is a copy of the CS descriptor now. and byte [bs2GdtSpare0 + 5], 0x90 ; DPL = 0 or byte [bs2GdtSpare0 + 5], X86_SEL_TYPE_ER_CONF_ACC %assign uCurRing 0 %rep 4 ; Far jumps. %assign uSpecifiedRpl 0 %rep 4 call TMPL_NM_CMN(Bs2ToRing %+ uCurRing) lea xAX, [.far_jmp_target_ %+ uSpecifiedRpl %+ uCurRing] %ifdef TMPL_64BIT ; AMD doesn't have an jmp far m16:m64 instruction, it ignores REX.W apparently. Intel does though. ; Tested on: Bulldozer mov dword [xSP + 4], BS2_SEL_SPARE0 | uSpecifiedRpl mov [xSP], eax jmp far dword [xSP] %else mov dword [xSP + xCB], BS2_SEL_SPARE0 | uSpecifiedRpl mov [xSP], xAX jmp far xPRE [xSP] %endif .far_jmp_target_ %+ uSpecifiedRpl %+ uCurRing: mov bx, cs call TMPL_NM(TestLoadMyCS) call TMPL_NM_CMN(Bs2ToRing0) ASSERT_CUR_CS_VALUE_IN_BX BS2_SEL_SPARE0 | uCurRing %assign uSpecifiedRpl uSpecifiedRpl + 1 %endrep ; Far calls. %assign uSpecifiedRpl 0 %rep 4 call TMPL_NM_CMN(Bs2ToRing %+ uCurRing) mov xSI, xSP lea xAX, [.far_call_target_ %+ uSpecifiedRpl %+ uCurRing] %ifdef TMPL_64BIT ; AMD doesn't have an call far m16:m64 instruction, it ignores REX.W apparently. Intel does though. ; Tested on: Bulldozer mov dword [xSP + 4], BS2_SEL_SPARE0 | uSpecifiedRpl mov [xSP], eax call far dword [xSP] %else mov dword [xSP + xCB], BS2_SEL_SPARE0 | uSpecifiedRpl mov [xSP], xAX call far xPRE [xSP] %endif .far_call_target_ %+ uSpecifiedRpl %+ uCurRing: mov bx, cs %ifdef TMPL_64BIT add xSP, 4 * 2 %else add xSP, xCB * 2 %endif call TMPL_NM(TestLoadMyCS) call TMPL_NM_CMN(Bs2ToRing0) ASSERT_CUR_CS_VALUE_IN_BX BS2_SEL_SPARE0 | uCurRing %assign uSpecifiedRpl uSpecifiedRpl + 1 %endrep %assign uCurRing uCurRing + 1 %endrep ; ; While at it, lets check something about RPL and non-conforming ; segments. The check when loading is supposed to be RPL >= DPL, ; except for when loading SS, where RPL = DPL = CPL. ; ; ring-0 mov dx, MY_R0_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R0_DS | 0 mov dx, MY_R0_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx ; ring-0 - Lower DPL isn't an issue, only RPL vs DPL. mov dx, MY_R1_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R1_DS | 0 mov dx, MY_R1_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R1_DS | 1 mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R2_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 0 mov dx, MY_R2_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 2 mov dx, MY_R2_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R3_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 0 mov dx, MY_R3_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 1 mov dx, MY_R3_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 2 mov dx, MY_R3_DS | 3 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 3 ; ring-0 - What works above doesn't work with ss. mov dx, MY_R1_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov ss, dx mov dx, MY_R1_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov ss, dx mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov ss, dx mov dx, MY_R2_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov ss, dx mov dx, MY_R3_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx ; ring-1 call TMPL_NM_CMN(Bs2ToRing1) mov dx, MY_R1_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R1_DS | 0 mov dx, MY_R1_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R1_DS | 1 mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R1_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R0_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx ; ring-1 - Lower DPL isn't an issue, only RPL vs DPL. mov dx, MY_R2_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 0 mov dx, MY_R2_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 1 mov dx, MY_R2_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 2 mov dx, MY_R2_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R3_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 0 mov dx, MY_R3_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 1 mov dx, MY_R3_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 2 mov dx, MY_R3_DS | 3 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 3 ; ring-1 - What works above doesn't work with ss. mov dx, MY_R1_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov ss, dx mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov ss, dx mov dx, MY_R2_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov ss, dx mov dx, MY_R3_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx ; ring-2 call TMPL_NM_CMN(Bs2ToRing2) mov dx, MY_R2_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 0 mov dx, MY_R2_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 1 mov dx, MY_R2_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R2_DS | 2 mov dx, MY_R2_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R0_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R1_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx ; ring-2 - Lower DPL isn't an issue, only RPL vs DPL. mov dx, MY_R3_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 0 mov dx, MY_R3_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 1 mov dx, MY_R3_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 2 mov dx, MY_R3_DS | 3 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 3 ; ring-2 - What works above doesn't work with ss. mov dx, MY_R2_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov ss, dx mov dx, MY_R2_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov ss, dx mov dx, MY_R3_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx ; ring-3 call TMPL_NM_CMN(Bs2ToRing3) mov dx, MY_R3_DS | 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 0 mov dx, MY_R3_DS | 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 1 mov dx, MY_R3_DS | 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 2 mov dx, MY_R3_DS | 3 mov fs, dx ASSERT_CUR_SREG_VALUE fs, MY_R3_DS | 3 mov dx, MY_R0_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R0_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R0_DS, mov fs, dx mov dx, MY_R1_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R1_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R1_DS, mov fs, dx mov dx, MY_R2_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R2_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R2_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx mov dx, MY_R2_DS | 3 BS2_TRAP_INSTR X86_XCPT_GP, MY_R2_DS, mov fs, dx ; ring-0 - What works above doesn't work with ss. mov dx, MY_R3_DS | 0 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 1 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx mov dx, MY_R3_DS | 2 BS2_TRAP_INSTR X86_XCPT_GP, MY_R3_DS, mov ss, dx call TMPL_NM_CMN(Bs2ToRing0) ; ; One more odd thing, NULL selectors and RPL. ; pushf cli %assign uCurRing 0 %rep 4 ; Null sectors. call TMPL_NM_CMN(Bs2ToRing %+ uCurRing) mov si, ss mov dx, 0 mov fs, dx ASSERT_CUR_SREG_VALUE fs, 0 %if MY_IS_64BIT == 0 || uCurRing != 0 %ifdef TMPL_64BIT ; AMD is doing something inconsistent. %if uCurRing != 3 test byte [g_fCpuAmd], 1 jz .null_0_not_amd_ %+ uCurRing mov ss, dx ASSERT_CUR_SREG_VALUE ss, 0 jmp .null_0_next_ %+ uCurRing .null_0_not_amd_ %+ uCurRing: %endif %endif BS2_TRAP_INSTR X86_XCPT_GP, 0, mov ss, dx .null_0_next_ %+ uCurRing: %else mov ss, dx ASSERT_CUR_SREG_VALUE ss, 0 %endif mov ss, si mov dx, 1 mov fs, dx ASSERT_CUR_SREG_VALUE fs, 1 %if MY_IS_64BIT == 0 || uCurRing != 1 %ifdef TMPL_64BIT ; AMD is doing something inconsistent. %if uCurRing != 3 test byte [g_fCpuAmd], 1 jz .null_1_not_amd_ %+ uCurRing mov ss, dx ASSERT_CUR_SREG_VALUE ss, 1 jmp .null_1_next_ %+ uCurRing .null_1_not_amd_ %+ uCurRing: %endif %endif BS2_TRAP_INSTR X86_XCPT_GP, 0, mov ss, dx .null_1_next_ %+ uCurRing: %else mov ss, dx ASSERT_CUR_SREG_VALUE ss, 1 %endif mov ss, si mov dx, 2 mov fs, dx ASSERT_CUR_SREG_VALUE fs, 2 %if MY_IS_64BIT == 0 || uCurRing != 2 %ifdef TMPL_64BIT ; AMD is doing something inconsistent. %if uCurRing != 3 test byte [g_fCpuAmd], 1 jz .null_2_not_amd_ %+ uCurRing mov ss, dx ASSERT_CUR_SREG_VALUE ss, 2 jmp .null_2_next_ %+ uCurRing .null_2_not_amd_ %+ uCurRing: %endif %endif BS2_TRAP_INSTR X86_XCPT_GP, 0, mov ss, dx .null_2_next_ %+ uCurRing: %else mov ss, dx ASSERT_CUR_SREG_VALUE ss, 2 %endif mov ss, si mov dx, 3 mov fs, dx ASSERT_CUR_SREG_VALUE fs, 3 %ifdef TMPL_64BIT ; AMD is doing something inconsistent. %if uCurRing != 3 test byte [g_fCpuAmd], 1 jz .null_3_not_amd_ %+ uCurRing mov ss, dx ASSERT_CUR_SREG_VALUE ss, 3 jmp .null_3_next_ %+ uCurRing .null_3_not_amd_ %+ uCurRing: %endif %endif BS2_TRAP_INSTR X86_XCPT_GP, 0, mov ss, dx .null_3_next_ %+ uCurRing: mov ss, si %assign uCurRing uCurRing + 1 %endrep call TMPL_NM_CMN(Bs2ToRing0) ; Restore the selectors. mov dx, MY_R0_DS mov ds, dx mov es, dx mov fs, dx mov gs, dx popf ; ; Restore the descriptor and make sure it works. ; mov xSP, xDI ; restore the stack pointer. BS2_TRAP_INSTR X86_XCPT_BP, 0, int3 ; ; Done. ; call TMPL_NM_CMN(TestSubDone) pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', Conforming CS, ++', 0 ENDPROC TMPL_NM(TestConforming) ;; ; Returning from interrupt/trap/whatever handlers. ; ; @uses No registers, but BS2_SEL_SPARE0 is trashed. ; BEGINPROC TMPL_NM(TestReturn) push xBP mov xBP, xSP push sAX push xBX push xCX push xDX push xDI push xSI sub xSP, 80h ; iret stack frame space. mov xSI, xSP ; Save the stack register. mov xAX, .s_szSubTestName call TMPL_NM_CMN(TestSub) %ifdef TMPL_64BIT pushfq pop rdi ; rdi contains good flags register value. ; ; 64-bit mode: IRETQ unconditional pop of SS:RSP. ; mov qword [rsp + 20h], MY_R0_SS mov [rsp + 18h], rsp mov [rsp + 10h], rdi mov qword [rsp + 08h], MY_R0_CS lea rax, [.resume1 wrt rip] mov [rsp + 00h], rax iretq .resume1: pushfq pop rbx ASSERT_SIMPLE rsp, rsi, je, "Wrong RSP after IRETQ." mov rsp, rsi ASSERT_SIMPLE rbx, rdi, je, "Wrong flags after IRETQ." mov ax, ss ASSERT_SIMPLE ax, MY_R0_SS, je, "Wrong SS after IRETQ." mov ax, cs ASSERT_SIMPLE ax, MY_R0_CS, je, "Wrong CS after IRETQ." ; 64-bit mode: The NT flag causes #GP(0) mov qword [rsp + 20h], MY_R0_SS lea rax, [rsp - 100h] mov [rsp + 18h], rax mov [rsp + 10h], rdi mov qword [rsp + 08h], MY_R0_CS lea rax, [.resume2 wrt rip] mov [rsp + 00h], rax push rdi or dword [rsp], X86_EFL_NT popfq BS2_TRAP_BRANCH_INSTR X86_XCPT_GP, 0, .resume2, iretq pushfq pop rbx push rdi popfq ASSERT_SIMPLE rsp, rsi, je, "Wrong RSP after IRETQ." mov rsp, rsi mov rax, rdi or rax, X86_EFL_NT ASSERT_SIMPLE rbx, rax, je, "Wrong flags after IRETQ GP(0)-NT." mov ax, ss ASSERT_SIMPLE ax, MY_R0_SS, je, "Wrong SS after IRETQ." mov ax, cs ASSERT_SIMPLE ax, MY_R0_CS, je, "Wrong CS after IRETQ." ; 64-bit mode: The VM flag is disregarded. mov qword [rsp + 20h], MY_R0_SS lea rax, [rsp - 88h] mov [rsp + 18h], rax mov [rsp + 10h], rdi or dword [rsp + 10h], X86_EFL_VM mov qword [rsp + 08h], MY_R0_CS lea rax, [.resume3 wrt rip] mov [rsp + 00h], rax iretq .resume3: pushfq pop rbx add rsp, 88h ASSERT_SIMPLE rsp, rsi, je, "Wrong RSP after IRETQ." mov rsp, rsi mov rax, rdi ASSERT_SIMPLE rbx, rax, je, "Wrong flags after IRETQ GP(0)-NT." mov ax, ss ASSERT_SIMPLE ax, MY_R0_SS, je, "Wrong SS after IRETQ." mov ax, cs ASSERT_SIMPLE ax, MY_R0_CS, je, "Wrong CS after IRETQ." ; ; 64-bit mode: IRETD unconditionally pops SS:ESP as well. ; mov dword [rsp + 10h], MY_R0_SS lea eax, [esp - 18h] mov [rsp + 0ch], eax mov [rsp + 08h], edi mov dword [rsp + 04h], MY_R0_CS lea eax, [.resume20 wrt rip] mov [rsp + 00h], eax iretd .resume20: pushfq pop rbx add rsp, 18h ASSERT_SIMPLE rsp, rsi, je, "Wrong RSP after IRETD." mov rsp, rsi ASSERT_SIMPLE rbx, rdi, je, "Wrong flags after IRETD." mov ax, ss ASSERT_SIMPLE ax, MY_R0_SS, je, "Wrong SS after IRETD." mov ax, cs ASSERT_SIMPLE ax, MY_R0_CS, je, "Wrong CS after IRETD." ; ; 64-bit mode: IRET unconditionally pops SS:SP as well. ; mov word [rsp + 08h], MY_R0_SS lea eax, [esp - 1ah] mov [rsp + 06h], ax mov [rsp + 04h], di mov word [rsp + 02h], MY_R0_CS mov word [rsp + 00h], .resume30 o16 iret BEGINCODELOW .resume30: jmp .high1 BEGINCODEHIGH .high1: pushfq pop rbx add rsp, 1ah ASSERT_SIMPLE rsp, rsi, je, "Wrong RSP after IRET." mov rsp, rsi ASSERT_SIMPLE rbx, rdi, je, "Wrong flags after IRET." mov ax, ss ASSERT_SIMPLE ax, MY_R0_SS, je, "Wrong SS after IRET." mov ax, cs ASSERT_SIMPLE ax, MY_R0_CS, je, "Wrong CS after IRET." %elifdef TMPL_32BIT ; later... %endif ; ; Returning to 16-bit code, what happens to upper ESP bits? ; cli mov xBX, xSP ; save the current stack address mov sAX, BS2_SEL_R3_SS16 | 3 push sAX ; Return SS movzx edi, bx or edi, 0xdead0000 push sDI ; Return sSP %ifdef TMPL_64BIT pushfq %else pushfd %endif mov sAX, BS2_SEL_R3_CS16 | 3 push sAX ; Return CS lea sAX, [.resume100 xWrtRIP] push sAX ; Return sIP %ifdef TMPL_64BIT iretq %else iretd %endif BEGINCODELOW BITS 16 .resume100: xchg ebx, esp call Bs2ToRing0_p16 call TMPL_NM(Bs2Thunk_p16) BITS TMPL_BITS jmp .high100 BEGINCODEHIGH .high100: and edi, 0ffffh ASSERT_SIMPLE ebx, edi, je, "IRET to 16-bit didn't restore ESP as expected [#1]." %ifndef TMPL_16BIT ; ; Take two on 16-bit return, does the high word of ESP leak? ; cli mov sBX, sSP ; save the current stack address mov xSP, BS2_MUCK_ABOUT_BASE + 1000h mov sAX, BS2_SEL_R3_SS16 | 3 push sAX ; Return SS mov sDI, sBX push sDI ; Return sSP %ifdef TMPL_64BIT pushfq %else pushfd %endif mov sAX, BS2_SEL_R3_CS16 | 3 push sAX ; Return CS lea sAX, [.resume101 xWrtRIP] push sAX ; Return sIP %ifdef TMPL_64BIT iretq %else iretd %endif BEGINCODELOW BITS 16 .resume101: xchg ebx, esp call Bs2ToRing0_p16 call TMPL_NM(Bs2Thunk_p16) BITS TMPL_BITS jmp .high101 BEGINCODEHIGH .high101: or edi, (BS2_MUCK_ABOUT_BASE + 1000h) & 0ffff0000h ASSERT_SIMPLE ebx, edi, je, "IRET to 16-bit didn't restore ESP as expected [#2]." %endif ; Not 16-bit. ; ; Done. ; call TMPL_NM_CMN(TestSubDone) mov xSP, xSI add xSP, 80h pop xSI pop xDI pop xDX pop xCX pop xBX pop sAX leave ret .s_szSubTestName: db TMPL_MODE_STR, ', IRET', 0 ENDPROC TMPL_NM(TestReturn) ;; ; Do the tests for this mode. ; ; @uses nothing ; BEGINCODELOW BITS 16 BEGINPROC TMPL_NM(DoTestsForMode_rm) push bp mov bp, sp push ax ; ; Check if the mode and NX is supported, do the switch. ; call TMPL_NM(Bs2IsModeSupported_rm) jz .done call TMPL_NM(Bs2EnterMode_rm) BITS TMPL_BITS ; ; Test exception handler basics using INT3 and #BP. ; call TMPL_NM(TestGateType) call TMPL_NM(TestCodeSelector) call TMPL_NM(TestCheckOrderCsTypeVsIdteType) call TMPL_NM(TestStack) call TMPL_NM(TestConforming) call TMPL_NM(TestReturn) ; ; Back to real mode. ; call TMPL_NM(Bs2ExitMode) BITS 16 call Bs2DisableNX_r86 .done: pop ax leave ret ENDPROC TMPL_NM(DoTestsForMode_rm) TMPL_BEGINCODE BITS TMPL_BITS %include "bootsector2-template-footer.mac"