# $Id: VBoxXcode62.kmk 63437 2016-08-14 11:57:32Z vboxsync $
## @file
# kBuild Tool Config - Xcode 6.2 from tools, dmg or similar.
#

#
# Copyright (C) 2016 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

TOOL_VBoxXcode62 := Xcode 6.2 from tools, dmg or similar

# Figure out the path of the Xcode.app/Contents/Developer/.
ifndef PATH_TOOL_VBoxXcode62
 PATH_TOOL_VBoxXcode62 := $(wildcard $(KBUILD_DEVTOOLS_TRG)/xcode/v6.2*/*.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
 ifeq ($(PATH_TOOL_VBoxXcode62),)
  PATH_TOOL_VBoxXcode62 := $(wildcard $(KBUILD_DEVTOOLS)/darwin.amd64/xcode/v6.2*/*.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
  ifeq ($(PATH_TOOL_VBoxXcode62),)
   PATH_TOOL_VBoxXcode62 := $(wildcard $(KBUILD_DEVTOOLS)/darwin.x86/xcode/v6.2*/*.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
   ifeq ($(PATH_TOOL_VBoxXcode62),)
    PATH_TOOL_VBoxXcode62 := $(wildcard $(KBUILD_DEVTOOLS)/darwin.x86/xcode/v6.2*/*.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
    ifeq ($(PATH_TOOL_VBoxXcode62),)
     PATH_TOOL_VBoxXcode62 := $(wildcard /Applications/*Xcode*.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
     ifeq ($(PATH_TOOL_VBoxXcode62),)
      PATH_TOOL_VBoxXcode62 := $(wildcard /Volumes/Xcode/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk)
     endif
    endif
   endif
  endif
 endif
 ifneq ($(PATH_TOOL_VBoxXcode62),)
  PATH_TOOL_VBoxXcode62 := $(patsubst %/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk,%,$(firstword $(rsort $(PATH_TOOL_VBoxXcode62))))
 endif
else
 # Resolve any fance stuff once and for all.
 PATH_TOOL_VBoxXcode62 := $(PATH_TOOL_VBoxXcode62)
endif

# Additional paths derived from the above (external usage as well as tool internal).
PATH_TOOL_VBoxXcode62_SDKS      ?= $(PATH_TOOL_VBoxXcode62)/Platforms/MacOSX.platform/Developer/SDKs
PATH_TOOL_VBoxXcode62_TOOLCHAIN ?= $(PATH_TOOL_VBoxXcode62)/Toolchains/XcodeDefault.xctoolchain
PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN)/usr/bin/

# Tools macros.
TOOL_VBoxXcode62_CC        ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_CXX       ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang++$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_OBJC      ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_OBJCXX    ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_AS        ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_LD        ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang++$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_LD_SYSMOD ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)clang++$(HOSTSUFF_EXE)
ifndef TOOL_VBoxXcode62_LDFLAGS.$(KBUILD_TARGET)
TOOL_VBoxXcode62_LDFLAGS.dll ?= -dynamiclib
else
TOOL_VBoxXcode62_LDFLAGS.dll ?= $(TOOL_VBoxXcode62_LDFLAGS.$(KBUILD_TARGET))
endif
TOOL_VBoxXcode62_LDFLAGS.sysmod ?= -r
TOOL_VBoxXcode62_DSYMUTIL  ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)dsymutil$(HOSTSUFF_EXE)

ifdef SLKRUNS
TOOL_VBoxXcode62_CC     += -fmessage-length=0
TOOL_VBoxXcode62_CXX    += -fmessage-length=0
TOOL_VBoxXcode62_OBJC   += -fmessage-length=0
TOOL_VBoxXcode62_OBJCXX += -fmessage-length=0
endif

# Set up environment macro.
TOOL_VBoxXcode62_ENV_SETUP ?= $(REDIRECT) \
	-E 'DEVELOPER_DIR=$(PATH_TOOL_VBoxXcode62)' \
	-E 'PATH=$(PATH_TOOL_VBoxXcode62)/usr/bin/:$(PATH_TOOL_VBoxXcode62)/Toolchains/XcodeDefault.xctoolchain/usr/bin:$(PATH)' \
       --

# General Properties used by kBuild
TOOL_VBoxXcode62_COBJSUFF         ?= .o
TOOL_VBoxXcode62_CFLAGS           ?=
TOOL_VBoxXcode62_CFLAGS.debug     ?= -g
TOOL_VBoxXcode62_CFLAGS.profile   ?= -O2 #-g -pg
TOOL_VBoxXcode62_CFLAGS.release   ?= -O2
TOOL_VBoxXcode62_CINCS            ?=
TOOL_VBoxXcode62_CDEFS            ?=

TOOL_VBoxXcode62_CXXOBJSUFF       ?= .o
TOOL_VBoxXcode62_CXXFLAGS         ?=
TOOL_VBoxXcode62_CXXFLAGS.debug   ?= -g
TOOL_VBoxXcode62_CXXFLAGS.profile ?= -O2 #-g -pg
TOOL_VBoxXcode62_CXXFLAGS.release ?= -O2
TOOL_VBoxXcode62_CXXINCS          ?=
TOOL_VBoxXcode62_CXXDEFS          ?=

TOOL_VBoxXcode62_OBJCOBJSUFF      ?= .o
TOOL_VBoxXcode62_OBJCFLAGS        ?=
TOOL_VBoxXcode62_OBJCFLAGS.debug  ?= -g
TOOL_VBoxXcode62_OBJCFLAGS.profile?= -O2 #-g -pg
TOOL_VBoxXcode62_OBJCFLAGS.release?= -O2
TOOL_VBoxXcode62_OBJCINCS         ?=
TOOL_VBoxXcode62_OBJCDEFS         ?=

TOOL_VBoxXcode62_OBJCXXOBJSUFF        ?= .o
TOOL_VBoxXcode62_OBJCXXFLAGS          ?=
TOOL_VBoxXcode62_OBJCXXFLAGS.debug    ?= -g
TOOL_VBoxXcode62_OBJCXXFLAGS.profile  ?= -O2 #-g -pg
TOOL_VBoxXcode62_OBJCXXFLAGS.release  ?= -O2
TOOL_VBoxXcode62_OBJCXXINCS           ?=
TOOL_VBoxXcode62_OBJCXXDEFS           ?=

TOOL_VBoxXcode62_ASFLAGS          ?= -x assembler-with-cpp
TOOL_VBoxXcode62_ASFLAGS.debug    ?= -g
TOOL_VBoxXcode62_ASFLAGS.profile  ?= -g
TOOL_VBoxXcode62_ASOBJSUFF        ?= .o

TOOL_VBoxXcode62_AR               ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)ar$(HOSTSUFF_EXE)
TOOL_VBoxXcode62_ARFLAGS          ?= -c -rs
TOOL_VBoxXcode62_ARLIBSUFF        ?= .a

TOOL_VBoxXcode62_LDFLAGS          ?=
TOOL_VBoxXcode62_LDFLAGS.debug    ?= -g
TOOL_VBoxXcode62_LDFLAGS.profile  ?= -g

TOOL_VBoxXcode62_STRIP_PROGRAM    ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)strip -SXxru
TOOL_VBoxXcode62_STRIP_DLL        ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)strip -Sxru
TOOL_VBoxXcode62_STRIP_SYSMOD     ?= $(PATH_TOOL_VBoxXcode62_TOOLCHAIN_BIN_SLASH)strip -Sru


##
# Calculate the files in the debug bundle.
# @param    1           The whole output filename.
# @param    2   	The output filename sans suffix.
TOOL_VBoxXcode62_DEBUG_BUNDLE_FN = \
    $(1).dSYM/ \
    $(1).dSYM/Contents/ \
    $(1).dSYM/Contents/Resources/ \
    $(1).dSYM/Contents/Resources/DWARF/ \
    $(1).dSYM/Contents/Info.plist \
    $(1).dSYM/Contents/Resources/DWARF/$(notdir $(1))

##
# Calculate the files in the debug bundle.
# @param    1           The whole linker output filename.
# @param    2   	The linker output filename sans suffix.
# @param    3           The desired install name (no dir slash).
# @remarks  The Info.plist has some reference to the original name, but gdb
#           does not care and only check for a symbol file in the DWARF
#           directory with the same name as the debugged module.
TOOL_VBoxXcode62_DEBUG_INSTALL_FN= \
    $(3).dSYM/ \
    $(3).dSYM/Contents/ \
    $(3).dSYM/Contents/Resources/ \
    $(3).dSYM/Contents/Resources/DWARF/ \
    $(1).dSYM/Contents/Info.plist=>$(3).dSYM/Contents/Info.plist \
    $(1).dSYM/Contents/Resources/DWARF/$(notdir $(1))=>$(3).dSYM/Contents/Resources/DWARF/$(notdir $(3))


## Compile C source.
# @param    $(target)   Normalized main target name.
# @param    $(source)   Source filename (relative).
# @param    $(obj)      Object file name. This shall be (re)created by the compilation.
# @param    $(dep)	    Dependcy file. This shall be (re)created by the compilation.
# @param    $(flags)    Flags.
# @param    $(defs)     Definitions. No -D or something.
# @param    $(incs)     Includes. No -I or something.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
#
# @param    $(outbase)  Output basename (full). Use this for list files and such.
# @param    $(objsuff)  Object suffix.
TOOL_VBoxXcode62_COMPILE_C_DEPEND =
TOOL_VBoxXcode62_COMPILE_C_DEPORD =
ifdef KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_C_USES_KOBJCACHE = 1
TOOL_VBoxXcode62_COMPILE_C_OUTPUT = $(outbase).i
define TOOL_VBoxXcode62_COMPILE_C_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
		--kObjCache-cpp $(outbase).i\
		$(TOOL_VBoxXcode62_CC) -E -o -\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		$(abspath $(source))\
		--kObjCache-cc $(obj)\
		$(TOOL_VBoxXcode62_CC) -c\
		$(flags) -x c\
		-o $(obj)\
		-
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
else  # !KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_C_OUTPUT =
define TOOL_VBoxXcode62_COMPILE_C_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_CC) -c\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		-o $(obj)\
		$(abspath $(source))
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
endif # !KUSE_OBJCACHE


## Compile C++ source.
# @param    $(target)   Normalized main target name.
# @param    $(source)   Source filename (relative).
# @param    $(obj)      Object file name. This shall be (re)created by the compilation.
# @param    $(dep)	    Dependcy file. This shall be (re)created by the compilation.
# @param    $(flags)    Flags.
# @param    $(defs)     Definitions. No -D or something.
# @param    $(incs)     Includes. No -I or something.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
# @param    $(objsuff)  Object suffix.
TOOL_VBoxXcode62_COMPILE_CXX_DEPEND =
TOOL_VBoxXcode62_COMPILE_CXX_DEPORD =
ifdef KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_CXX_USES_KOBJCACHE = 1
TOOL_VBoxXcode62_COMPILE_CXX_OUTPUT = $(outbase).ii
define TOOL_VBoxXcode62_COMPILE_CXX_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
		--kObjCache-cpp $(outbase).ii\
		$(TOOL_VBoxXcode62_CXX) -E -o -\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep)\
		-Wp,-MP\
		$(abspath $(source))\
		--kObjCache-cc $(obj)\
		$(TOOL_VBoxXcode62_CXX) -c\
		$(flags) -x c++\
		-o $(obj)\
		-
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
else  # !KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_CXX_OUTPUT =
define TOOL_VBoxXcode62_COMPILE_CXX_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_CXX) -c\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep)\
		-Wp,-MP\
		-o $(obj)\
		$(abspath $(source))
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
endif # !KBUILD_USE_KOBJCACHE


## Compile Objective-C source.
# @param    $(target)   Normalized main target name.
# @param    $(source)   Source filename (relative).
# @param    $(obj)      Object file name. This shall be (re)created by the compilation.
# @param    $(dep)	    Dependcy file. This shall be (re)created by the compilation.
# @param    $(flags)    Flags.
# @param    $(defs)     Definitions. No -D or something.
# @param    $(incs)     Includes. No -I or something.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
# @param    $(objsuff)  Object suffix.
TOOL_VBoxXcode62_COMPILE_OBJC_DEPEND =
TOOL_VBoxXcode62_COMPILE_OBJC_DEPORD =
ifdef KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_OBJC_USES_KOBJCACHE = 1
TOOL_VBoxXcode62_COMPILE_OBJC_OUTPUT = $(outbase).mi
define TOOL_VBoxXcode62_COMPILE_OBJC_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
		--kObjCache-cpp $(outbase).ii\
		$(TOOL_VBoxXcode62_OBJC) -E -o -\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		$(abspath $(source))\
		--kObjCache-cc $(obj)\
		$(TOOL_VBoxXcode62_OBJC) -c\
		$(flags) -x objective-c \
		-o $(obj)\
		-
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
else  # !KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_OBJC_OUTPUT =
define TOOL_VBoxXcode62_COMPILE_OBJC_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_OBJC) -c\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		-o $(obj)\
		$(abspath $(source))
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
endif # !KBUILD_USE_KOBJCACHE


## Compile Objective-C++ source.
# @param    $(target)   Normalized main target name.
# @param    $(source)   Source filename (relative).
# @param    $(obj)      Object file name. This shall be (re)created by the compilation.
# @param    $(dep)	    Dependcy file. This shall be (re)created by the compilation.
# @param    $(flags)    Flags.
# @param    $(defs)     Definitions. No -D or something.
# @param    $(incs)     Includes. No -I or something.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
# @param    $(objsuff)  Object suffix.
TOOL_VBoxXcode62_COMPILE_OBJCXX_DEPEND =
TOOL_VBoxXcode62_COMPILE_OBJCXX_DEPORD =
ifdef KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_OBJCXX_USES_KOBJCACHE = 1
TOOL_VBoxXcode62_COMPILE_OBJCXX_OUTPUT = $(outbase).mii
define TOOL_VBoxXcode62_COMPILE_OBJCXX_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(KOBJCACHE) -f $(outbase).koc -d $(PATH_OBJCACHE) -t $(bld_trg).$(bld_trg_arch) -p\
		--kObjCache-cpp $(outbase).mii\
		$(TOOL_VBoxXcode62_OBJCXX) -E -o -\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		$(abspath $(source))\
		--kObjCache-cc $(obj)\
		$(TOOL_VBoxXcode62_OBJCXX) -c\
		$(flags) -x objective-c++ \
		-o $(obj)\
		-
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
else  # !KBUILD_USE_KOBJCACHE
TOOL_VBoxXcode62_COMPILE_OBJCXX_OUTPUT =
define TOOL_VBoxXcode62_COMPILE_OBJCXX_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_OBJCXX) -c\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		-o $(obj)\
		$(abspath $(source))
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef
endif # !KBUILD_USE_KOBJCACHE


## Compile Assembly source.
# @param    $(target)   Normalized main target name.
# @param    $(source)   Source filename (relative).
# @param    $(obj)      Object file name. This shall be (re)created by the compilation.
# @param    $(dep)      Dependcy file. This shall be (re)created by the compilation.
# @param    $(flags)    Flags.
# @param    $(defs)     Definitions. No -D or something.
# @param    $(incs)     Includes. No -I or something.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)     Other dependencies.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
# @param    $(objsuff)  Object suffix.
#
TOOL_VBoxXcode62_COMPILE_AS_OUTPUT =
TOOL_VBoxXcode62_COMPILE_AS_DEPEND =
TOOL_VBoxXcode62_COMPILE_AS_DEPORD =
define TOOL_VBoxXcode62_COMPILE_AS_CMDS
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_AS) -c\
		$(flags) $(addprefix -I, $(incs)) $(addprefix -D, $(defs))\
		-Wp,-MD,$(dep) -Wp,-MP\
		-o $(obj)\
		$(abspath $(source))
	%$(QUIET)$(APPEND) -n "$(dep)" "" "$(source):" ""
endef


## Link library
# @param    $(target)   Normalized main target name.
# @param    $(out)		Library name.
# @param    $(objs)     Object files to put in the library.
# @param    $(flags)    Flags.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(othersrc) Unhandled sources.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
TOOL_VBoxXcode62_LINK_LIBRARY_OUTPUT =
TOOL_VBoxXcode62_LINK_LIBRARY_DEPEND = $(othersrc)
TOOL_VBoxXcode62_LINK_LIBRARY_DEPORD =
define TOOL_VBoxXcode62_LINK_LIBRARY_CMDS
	$(if $(strip $(objs)),$(call xargs,$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_AR) $(flags) $(out),$(objs)))
	$(foreach lib,$(othersrc)\
		,$(NL)$(TAB)$(call MSG_AR_MERGE,$(target),$(out),$(lib)) \
		$(NL)$(TAB)$(QUIET)$(RM_EXT) -f $(dir $(outbase))ar.tmp.dir/* \
		$(NL)$(TAB)$(QUIET)$(MKDIR) -p $(dir $(outbase))/ar.tmp.dir/ \
		$(NL)$(TAB)$(QUIET)(cd $(dir $(outbase))ar.tmp.dir/ \
			&& $(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_AR) -x $(abspath $(lib)) \
		    && $(RM_EXT) -f ./__.SYMDEF* \
			&& $(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_AR) $(flags) $(out) *) \
		$(NL)$(TAB)$(QUIET)$(RM_EXT) -f $(dir $(outbase))/ar.tmp.dir/* \
		$(NL)$(TAB)$(QUIET)$(RMDIR) $(dir $(outbase))ar.tmp.dir/)
endef


## Link program
# @param    $(target)   Normalized main target name.
# @param    $(out)		Program name.
# @param    $(objs)     Object files to link together.
# @param    $(libs)     Libraries to search.
# @param    $(libpath)  Library search paths.
# @param    $(flags)    Flags.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(othersrc) Unhandled sources.
# @param    $(custom_pre)   Custom step invoked before linking.
# @param    $(custom_post)  Custom step invoked after linking.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
TOOL_VBoxXcode62_LINK_PROGRAM_OUTPUT = $(outbase).rsp
TOOL_VBoxXcode62_LINK_PROGRAM_OUTPUT_DEBUG = $(call TOOL_VBoxXcode62_DEBUG_BUNDLE_FN,$(out))
TOOL_VBoxXcode62_LINK_PROGRAM_DEBUG_INSTALL_FN = $(TOOL_VBoxXcode62_DEBUG_INSTALL_FN)
TOOL_VBoxXcode62_LINK_PROGRAM_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))
TOOL_VBoxXcode62_LINK_PROGRAM_DEPORD =
define TOOL_VBoxXcode62_LINK_PROGRAM_CMDS
	$(QUIET)$(APPEND) -n $(outbase).rsp $(objs)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_LD) $(flags) -o $(out)\
		-filelist $(outbase).rsp\
		$(foreach p,$(libpath), -L$(p))\
		$(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))
 ifeq ($(ld_debug),split)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_DSYMUTIL) -o $(out).dSYM/ $(out)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_STRIP_PROGRAM) $(out)
 endif
endef


## Link DLL
# @param    $(target)   Normalized main target name.
# @param    $(out)		Program name.
# @param    $(objs)     Object files to link together.
# @param    $(libs)     Libraries to search.
# @param    $(libpath)  Library search paths.
# @param    $(flags)    Flags.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(othersrc) Unhandled sources.
# @param    $(custom_pre)   Custom step invoked before linking.
# @param    $(custom_post)  Custom step invoked after linking.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
TOOL_VBoxXcode62_LINK_DLL_OUTPUT = $(outbase).rsp
TOOL_VBoxXcode62_LINK_DLL_OUTPUT_DEBUG = $(call TOOL_VBoxXcode62_DEBUG_BUNDLE_FN,$(out))
TOOL_VBoxXcode62_LINK_DLL_DEBUG_INSTALL_FN = $(TOOL_VBoxXcode62_DEBUG_INSTALL_FN)
TOOL_VBoxXcode62_LINK_DLL_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))
TOOL_VBoxXcode62_LINK_DLL_DEPORD =
define TOOL_VBoxXcode62_LINK_DLL_CMDS
	$(QUIET)$(APPEND) -n $(outbase).rsp $(objs)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_LD) $(TOOL_VBoxXcode62_LDFLAGS.dll) $(flags) -o $(out)\
		$(call TOOL_VBoxXcode62_LD_SONAME,$(target),$(out))\
		-filelist $(outbase).rsp\
		$(foreach p,$(libpath), -L$(p))\
		$(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))
 ifeq ($(ld_debug),split)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_DSYMUTIL) -o $(out).dSYM/ $(out)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_STRIP_DLL) $(out)
 endif
endef


## Link system module (windows aka driver, linux aka kernel module)
# @param    $(target)   Normalized main target name.
# @param    $(out)		System module name.
# @param    $(objs)     Object files to link together.
# @param    $(libs)     Libraries to search.
# @param    $(libpath)  Library search paths.
# @param    $(flags)    Flags.
# @param    $(dirdep)   Directory creation dependency.
# @param    $(deps)		Other dependencies.
# @param    $(othersrc) Unhandled sources.
# @param    $(custom_pre)   Custom step invoked before linking.
# @param    $(custom_post)  Custom step invoked after linking.
# @param    $(outbase)  Output basename (full). Use this for list files and such.
TOOL_VBoxXcode62_LINK_SYSMOD_OUTPUT = $(outbase).rsp
TOOL_VBoxXcode62_LINK_SYSMOD_OUTPUT_DEBUG = $(call TOOL_VBoxXcode62_DEBUG_BUNDLE_FN,$(out))
TOOL_VBoxXcode62_LINK_SYSMOD_DEBUG_INSTALL_FN = $(TOOL_VBoxXcode62_DEBUG_INSTALL_FN)
TOOL_VBoxXcode62_LINK_SYSMOD_DEPEND = $(foreach lib,$(libs),$(if $(findstring $(lib),$(subst /,x,$(lib))),, $(lib)))
TOOL_VBoxXcode62_LINK_SYSMOD_DEPORD =
define TOOL_VBoxXcode62_LINK_SYSMOD_CMDS
	$(QUIET)$(APPEND) -n $(outbase).rsp $(objs)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_LD_SYSMOD) $(TOOL_VBoxXcode62_LDFLAGS.sysmod) $(flags) -o $(out)\
		-filelist $(outbase).rsp\
		$(foreach p,$(libpath), -L$(p))\
		$(foreach lib,$(libs), $(if $(findstring $(lib),$(subst /,x,$(lib))), -l$(patsubst lib%,%,$(lib)), $(lib)))
 ifeq ($(ld_debug),split)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_DSYMUTIL) -o $(out).dSYM/ $(out)
	$(QUIET)$(TOOL_VBoxXcode62_ENV_SETUP) $(TOOL_VBoxXcode62_STRIP_SYSMOD) $(out)
 endif
endef