; $Id: bootsector2-common-init-traps.mac 58543 2015-11-02 15:10:49Z vboxsync $ ;; @file ; Common bootsector code init, traps. ; ; This is included from bootsector2-common-init-code.mac and was split out of ; that file to keep the size manageable. ; ; ; Copyright (C) 2007-2015 Oracle Corporation ; ; This file is part of VirtualBox Open Source Edition (OSE), as ; available from http://www.virtualbox.org. This file is free software; ; you can redistribute it and/or modify it under the terms of the GNU ; General Public License (GPL) as published by the Free Software ; Foundation, in version 2 as it comes in the "COPYING" file of the ; VirtualBox OSE distribution. VirtualBox OSE is distributed in the ; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. ; ; The contents of this file may alternatively be used under the terms ; of the Common Development and Distribution License Version 1.0 ; (CDDL) only, as it comes in the "COPYING.CDDL" file of the ; VirtualBox OSE distribution, in which case the provisions of the ; CDDL are applicable instead of those of the GPL. ; ; You may elect to license modified versions of this file under the ; terms and conditions of either the GPL or the CDDL or both. ; %ifndef BS2_WITH_TRAPS %error "huh? BS2_WITH_TRAPS is not defined!" %endif ;******************************************************************************* ;* Header Files * ;******************************************************************************* %include "bootsector2-structures.mac" %include "bootsector2-api.mac" ;******************************************************************************* ;* Global Variables * ;******************************************************************************* BEGINCODELOW ALIGNDATA(8) ;; Where to resume execution after a trap (if g_fTrapPrepared is set). ; @internal g_TrapResumeRIP: dq 0 ;; Set if we've prepared for a trap. ; @internal g_fTrapPrepared: db 0 ;; Benchmark indicator. ; This is set to the expected trap number when we're benchmarking and 0ffh when ; we aren't benchmarking. ; @internal g_u8TrapBenchmarkNo: db 0ffh db 0 ; alignment padding. ;; The last trap number. GLOBALNAME g_u8LastTrapNo db 0 ;; The number of traps since last call to Bs2TrapReset. GLOBALNAME g_u32cTraps dd 0 ;; The last trap error code. GLOBALNAME g_u64LastTrapErr dq 0 ;; The register frame of the last trap (BS2REGS). GLOBALNAME g_LastTrapRegs times (BS2REGS_size) db 0 ;; The RFLAGS/EFLAGS inside last invoked trap handler. GLOBALNAME g_u64LastTrapHandlerRFlags dq 0 ;; The CS inside last invoked trap handler. GLOBALNAME g_u16LastTrapHandlerCS dw 0 ;; The SS inside last invoked trap handler. GLOBALNAME g_u16LastTrapHandlerSS dw 0 dw 0,0 ; alignment ;; The RSP inside the last invoked trap handler, i.e. when bs2Trap_XX_32bit is ; entered, so including fake error code and vector number. GLOBALNAME g_u64LastTrapHandlerRSP dq 0 ;; ; Pointer to an array of BS2TRAPREC1 records. GLOBALNAME g_paTrapRecs dq 0 ;; Number of entries in the array g_paTrapRecs points to. GLOBALNAME g_cTrapRecs dd 0 ;; The index of the last BS2TRAPREC1 we hit. GLOBALNAME g_iTrapRecLast dd 0 ;; The base address the BS2TRAPREC.offWhere values are relative to. GLOBALNAME g_pTrapRecBase dq 0 ;; ; Reset all the trap globals to default. ; ; This undos the effect of any previous Bs2TrapPrepare call. ; ; @uses nothing. ; BEGINCODELOW BITS 16 BEGINPROC Bs2TrapReset_rm16 push xBP mov xBP, xSP push ds push word 0 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov dword [g_TrapResumeRIP], 0 mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], 0ffh mov byte [g_fTrapPrepared], 0 pop ds leave ret ENDPROC Bs2TrapReset_rm16 ;; ; Reset all the trap globals to default. ; ; This undos the effect of any previous Bs2TrapPrepare call. ; ; @uses nothing. ; BEGINCODELOW BITS 16 BEGINPROC Bs2TrapReset_p16 push ds push BS2_SEL_DS16 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov dword [g_TrapResumeRIP], 0 mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], 0ffh mov byte [g_fTrapPrepared], 0 pop ds ret ENDPROC Bs2TrapReset_p16 ;; ; Reset all the trap globals to default. ; ; This undos the effect of any previous Bs2TrapPrepare call. ; ; @uses nothing. ; BEGINCODEHIGH BITS 32 BEGINPROC Bs2TrapReset_p32 push ds push BS2_SEL_DS32 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov dword [g_TrapResumeRIP], 0 mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], 0ffh mov byte [g_fTrapPrepared], 0 pop ds ret ENDPROC Bs2TrapReset_p32 ;; ; Reset all the trap globals to default. ; ; This undos the effect of any previous Bs2TrapPrepare call. ; ; @uses nothing. ; BEGINCODEHIGH BITS 64 BEGINPROC Bs2TrapReset_p64 mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov qword [g_u64LastTrapErr], 0 mov qword [g_TrapResumeRIP], 0 mov byte [g_u8TrapBenchmarkNo], 0ffh mov byte [g_fTrapPrepared], 0 ret ENDPROC Bs2TrapReset_p64 ;; ; Prepare for a test that will trap. ; ; @param xAX Where to resume after the trap. ; @param dl Set to 0ffh for tests and the expected trap number when ; preparing a benchmark. ; @uses nothing. ; BEGINCODELOW BITS 16 BEGINPROC Bs2TrapPrepare_rm16 push xBP mov xBP, xSP push ds push word 0 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov word [g_TrapResumeRIP], ax mov word [g_TrapResumeRIP + 2], 0 mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], dl mov byte [g_fTrapPrepared], 1 pop ds leave ret ENDPROC Bs2TrapPrepare_rm16 ;; ; Prepare for a test that will trap. ; ; @param ax Where to resume after the trap. ; @param dl Set to 0ffh for tests and the expected trap number when ; preparing a benchmark. ; @uses nothing. ; BEGINCODELOW BITS 16 BEGINPROC Bs2TrapPrepare_p16 push ds push BS2_SEL_DS16 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov word [g_TrapResumeRIP], ax mov word [g_TrapResumeRIP + 2], 0 mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], dl mov byte [g_fTrapPrepared], 1 pop ds ret ENDPROC Bs2TrapPrepare_p16 ;; ; Prepare for a test that will trap. ; ; @param eax Where to resume after the trap. ; @param dl Set to 0ffh for tests and the expected trap number when ; preparing a benchmark. ; @uses nothing. ; BEGINCODEHIGH BITS 32 BEGINPROC Bs2TrapPrepare_p32 push ds push BS2_SEL_DS32 pop ds mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov dword [g_u64LastTrapErr], 0 mov dword [g_u64LastTrapErr + 4], 0 mov dword [g_TrapResumeRIP], eax mov dword [g_TrapResumeRIP + 4], 0 mov byte [g_u8TrapBenchmarkNo], dl mov byte [g_fTrapPrepared], 1 pop ds ret ENDPROC Bs2TrapPrepare_p32 ;; ; Prepare for a test that will trap. ; ; @param rax Where to resume after the trap. ; @param dl Set to 0ffh for tests and the expected trap number when ; preparing a benchmark. ; @uses nothing. ; BEGINCODEHIGH BITS 64 BEGINPROC Bs2TrapPrepare_p64 mov dword [g_u32cTraps], 0 mov byte [g_u8LastTrapNo], 0ffh mov qword [g_u64LastTrapErr], 0 mov qword [g_TrapResumeRIP], rax mov byte [g_u8TrapBenchmarkNo], dl mov byte [g_fTrapPrepared], 1 ret ENDPROC Bs2TrapPrepare_p64 BEGINCODELOW ; The TSSes, IDTs and handlers must be 16-bit addressable. %ifdef BS2_INC_CMN_PM ; ; 32-bit TSS (X86TSS32). ; ALIGNDATA(16) bs2Tss32Bit: dw 07fffh ; selPrev - Back link to previous task. (static) dw 0h ; padding1; dd BS2_R0_STACK_ADDR ; esp0 - Ring-0 stack pointer. (static) dw BS2_SEL_SS32 ; ss0 dw 0 ; padding dd BS2_R1_STACK_ADDR ; esp1 - Ring-1 stack pointer. (static) dw 0 ; ss1 dw 0 ; padding dd BS2_R2_STACK_ADDR ; esp2 - Ring-1 stack pointer. (static) dw 0 ; ss2 dw 0 ; padding dd 0ffffffffh ; cr3 - Page directory for the task. (static) dd 0 ; eip - EIP before task switch. dd 0 ; eflags - EFLAGS before task switch. dd 0 ; eax - EAX before task switch. dd 0 ; ecx - ECX before task switch. dd 0 ; edx - EDX before task switch. dd 0 ; ebx - EBX before task switch. dd 0 ; esp - ESP before task switch. dd 0 ; ebp - EBP before task switch. dd 0 ; esi - ESI before task switch. dd 0 ; edi - EDI before task switch. dw 0, 0 ; es,pad - ES before task switch. dw 0, 0 ; cs,pad - CS before task switch. dw 0, 0 ; ss,pad - SS before task switch. dw 0, 0 ; ds,pad - DS before task switch. dw 0, 0 ; fs,pad - FS before task switch. dw 0, 0 ; gs,pad - GS before task switch. dw 0, 0 ; ldt,pad - LDTR before task switch. dw 0 ; fDebugTrap - Debug trap flag. dw 7fffh ; offIoBitmap - Offset relative to the TSS of the ; start of the I/O Bitmap and the end of the ; interrupt redirection bitmap. ; IntRedirBitmap - 32 bytes for the virtual interrupt redirection bitmap. (VME) bs2Tss32BitEnd: times (68h - (bs2Tss32BitEnd - bs2Tss32Bit)) db 0 times ((bs2Tss32BitEnd - bs2Tss32Bit) - 68h) db 0 ; ; 32-bit TSS for #DF (X86TSS32). ; ALIGNDATA(16) bs2Tss32BitDf: dw 07fffh ; selPrev - Back link to previous task. (static) dw 0h ; padding1; dd BS2_DF_R0_STACK_ADDR ; esp0 - Ring-0 stack pointer. (static) dw BS2_SEL_SS32 ; ss0 dw 0 ; padding dd 0 ; esp1 - Ring-1 stack pointer. (static) dw 0 ; ss1 dw 0 ; padding dd 0 ; esp2 - Ring-1 stack pointer. (static) dw 0 ; ss2 dw 0 ; padding dd 0ffffffffh ; cr3 - Page directory for the task. (static) dd bs2Trap_08h_32bit ; eip - EIP before task switch. */ dd 0 ; eflags - EFLAGS before task switch. */ dd 0 ; eax - EAX before task switch. */ dd 0 ; ecx - ECX before task switch. */ dd 0 ; edx - EDX before task switch. */ dd 0 ; ebx - EBX before task switch. */ dd BS2_DF_R0_STACK_ADDR ; esp - ESP before task switch. */ dd 0 ; ebp - EBP before task switch. */ dd 0 ; esi - ESI before task switch. */ dd 0 ; edi - EDI before task switch. */ dw BS2_SEL_DS32, 0 ; es,pad - ES before task switch. */ dw BS2_SEL_CS32, 0 ; cs,pad - CS before task switch. */ dw BS2_SEL_SS32, 0 ; ss,pad - SS before task switch. */ dw BS2_SEL_DS32, 0 ; ds,pad - DS before task switch. */ dw BS2_SEL_DS32, 0 ; fs,pad - FS before task switch. */ dw BS2_SEL_DS32, 0 ; gs,pad - GS before task switch. */ dw 0, 0 ; ldt,pad- LDTR before task switch. */ dw 0 ; fDebugTrap - Debug trap flag. dw 7fffh ; offIoBitmap - Offset relative to the TSS of the ; start of the I/O Bitmap and the end of the ; interrupt redirection bitmap. ; IntRedirBitmap - 32 bytes for the virtual interrupt redirection bitmap. (VME) bs2Tss32BitDfEnd: times (68h - (bs2Tss32BitDfEnd - bs2Tss32BitDf)) db 0 times ((bs2Tss32BitDfEnd - bs2Tss32BitDf) - 68h) db 0 ; ; 32-bit IDT (X86DESCGATE). ; ALIGNDATA(16) bs2Idt32bit: dw bs2Trap_00h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_01h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_02h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate bs2Idt32bit_BP: dw bs2Trap_03h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_04h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_05h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_06h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_07h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw 0, BS2_SEL_TSS32_DF, 08500h, 00000h ; p=1 dpl=0 type=taskgate dw bs2Trap_09h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0ah_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0bh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0ch_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0dh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0eh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_0fh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_10h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_11h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_12h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_13h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_14h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_15h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_16h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_17h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_18h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_19h_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1ah_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1bh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1ch_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1dh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1eh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2Trap_1fh_32bit, BS2_SEL_CS32, 08e00h, 00000h ; p=1 dpl=0 type=int32gate dw bs2TrapService32bit,BS2_SEL_CS32,0ee00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=3 type=int32gate %define BS2_TRAP_SERVICE_NO 30h ;; @todo bs2Idt32bitEnd ; ; 32-bit trap handlers. ; BITS 32 %macro bs2Trap_XX_32bit_macro 1 bs2Trap_ %+ %1 %+ _32bit: push %1 jmp bs2Trap_XX_32bit %endmacro %macro bs2Trap_XX_32bit_macro_no_err 1 bs2Trap_ %+ %1 %+ _32bit: push 0 push %1 jmp bs2Trap_XX_32bit %endmacro bs2Trap_XX_32bit_macro_no_err 00h bs2Trap_XX_32bit_macro_no_err 01h bs2Trap_XX_32bit_macro_no_err 02h bs2Trap_XX_32bit_macro_no_err 03h bs2Trap_XX_32bit_macro_no_err 04h bs2Trap_XX_32bit_macro_no_err 05h bs2Trap_XX_32bit_macro_no_err 06h bs2Trap_XX_32bit_macro_no_err 07h bs2Trap_XX_32bit_macro 08h bs2Trap_XX_32bit_macro_no_err 09h bs2Trap_XX_32bit_macro 0ah bs2Trap_XX_32bit_macro 0bh bs2Trap_XX_32bit_macro 0ch bs2Trap_XX_32bit_macro 0dh bs2Trap_XX_32bit_macro 0eh bs2Trap_XX_32bit_macro_no_err 0fh bs2Trap_XX_32bit_macro_no_err 10h bs2Trap_XX_32bit_macro 11h bs2Trap_XX_32bit_macro_no_err 12h bs2Trap_XX_32bit_macro_no_err 13h bs2Trap_XX_32bit_macro_no_err 14h bs2Trap_XX_32bit_macro_no_err 15h bs2Trap_XX_32bit_macro_no_err 16h bs2Trap_XX_32bit_macro_no_err 17h bs2Trap_XX_32bit_macro_no_err 18h bs2Trap_XX_32bit_macro_no_err 19h bs2Trap_XX_32bit_macro_no_err 1ah bs2Trap_XX_32bit_macro_no_err 1bh bs2Trap_XX_32bit_macro_no_err 1ch bs2Trap_XX_32bit_macro_no_err 1dh bs2Trap_XX_32bit_macro_no_err 1eh bs2Trap_XX_32bit_macro_no_err 1fh ;; ; Common 32-bit trap handler. ; ; return GS ebp + 2ch - v86 ; return FS ebp + 28h - v86 ; return DS ebp + 24h - v86 ; return ES ebp + 20h - v86 ; return SS ebp + 1ch - higher privilege ; return ESP ebp + 18h - higher privilege ; return EFLAGS ebp + 14h ; return CS ebp + 10h ; return EIP ebp + 0ch ; error code ebp + 08h ; vector # ebp + 04h BITS 32 BEGINCODEHIGH BEGINPROC bs2Trap_XX_32bit push ebp ; ebp + 00h mov ebp, esp pushfd ; ebp - 04h push eax ; ebp - 08h push ebx ; ebp - 0ch push ecx ; ebp - 10h push ds ; ebp - 14h mov eax, ss ; load flat DS. Using SS here because of conforming IDTE.CS tests. mov ds, ax pushfd ; Clear the AC flag. and dword [esp], ~X86_EFL_AC popfd ; ; Benchmark mode? Then resume the action right away! ; mov eax, [ebp + 04h] cmp [g_u8TrapBenchmarkNo], al jne .test_mode cmp byte [g_fTrapPrepared], 0 je .test_mode mov eax, [g_TrapResumeRIP] mov [ebp + 0ch], eax pop ds pop ecx pop ebx ;pop eax ;popfd leave add esp, 08h ; Skip the vector # and error code. xor eax, eax iret ; ; Update the globals. ; .test_mode: xor ecx, ecx ; zero register inc dword [g_u32cTraps] mov eax, [ebp + 04h] mov [g_u8LastTrapNo], al mov eax, [ebp + 08h] mov [g_u64LastTrapErr], eax mov [g_u64LastTrapErr + 4], ecx mov eax, [ebp - 04h] mov [g_u64LastTrapHandlerRFlags], eax mov dword [g_u64LastTrapHandlerRFlags + 4], ecx mov ax, cs mov [g_u16LastTrapHandlerCS], ax mov ax, ss mov [g_u16LastTrapHandlerSS], ax lea eax, [ebp + 4] mov [g_u64LastTrapHandlerRSP], eax mov [g_u64LastTrapHandlerRSP + 4], ecx ; ; Save the registers. ; lea ebx, [g_LastTrapRegs] mov eax, [ebp - 08h] mov [ebx + BS2REGS.rax], eax mov [ebx + BS2REGS.rax + 4], ecx mov eax, [ebp - 0ch] mov [ebx + BS2REGS.rbx], eax mov [ebx + BS2REGS.rbx + 4], ecx mov eax, [ebp - 10h] mov [ebx + BS2REGS.rcx], eax mov [ebx + BS2REGS.rcx + 4], ecx mov [ebx + BS2REGS.rdx], edx mov [ebx + BS2REGS.rdx + 4], ecx mov [ebx + BS2REGS.rdi], edi mov [ebx + BS2REGS.rdi + 4], ecx mov [ebx + BS2REGS.rsi], esi mov [ebx + BS2REGS.rsi + 4], ecx mov eax, [ebp] mov [ebx + BS2REGS.rbp], eax mov [ebx + BS2REGS.rbp + 4], ecx mov eax, [ebp + 0ch] mov [ebx + BS2REGS.rip], eax mov [ebx + BS2REGS.rip + 4], ecx mov [ebx + BS2REGS.r8], ecx mov [ebx + BS2REGS.r8 + 4], ecx mov [ebx + BS2REGS.r9], ecx mov [ebx + BS2REGS.r9 + 4], ecx mov [ebx + BS2REGS.r10], ecx mov [ebx + BS2REGS.r10 + 4], ecx mov [ebx + BS2REGS.r11], ecx mov [ebx + BS2REGS.r11 + 4], ecx mov [ebx + BS2REGS.r12], ecx mov [ebx + BS2REGS.r12 + 4], ecx mov [ebx + BS2REGS.r13], ecx mov [ebx + BS2REGS.r13 + 4], ecx mov [ebx + BS2REGS.r14], ecx mov [ebx + BS2REGS.r14 + 4], ecx mov [ebx + BS2REGS.r15], ecx mov [ebx + BS2REGS.r15 + 4], ecx mov eax, [ebp + 14h] mov [ebx + BS2REGS.rflags], eax mov [ebx + BS2REGS.rflags+4],ecx mov eax, [ebp + 10h] mov [ebx + BS2REGS.cs], ax mov [ebx + BS2REGS.cBits], byte 32 ; Part of the stack varies depending on the trap context. test dword [ebx + BS2REGS.rflags], X86_EFL_VM jnz .v86 test ax, 7h jz .ring0 .ring0: lea eax, [ebp + 18h] mov [ebx + BS2REGS.rsp], eax mov [ebx + BS2REGS.rsp + 4], ecx mov [ebx + BS2REGS.ss], ss mov eax, [ebp - 14h] mov [ebx + BS2REGS.ds], ax mov [ebx + BS2REGS.es], es mov [ebx + BS2REGS.fs], fs mov [ebx + BS2REGS.gs], gs jmp .do_crX .higher_privilege: mov eax, [ebp + 18h] mov [ebx + BS2REGS.rsp], eax mov [ebx + BS2REGS.rsp + 4], ecx mov eax, [ebp + 20h] mov [ebx + BS2REGS.ss], ax mov eax, [ebp - 14h] mov [ebx + BS2REGS.ds], ax mov [ebx + BS2REGS.es], es mov [ebx + BS2REGS.fs], fs mov [ebx + BS2REGS.gs], gs jmp .do_crX .v86: mov eax, [ebp + 18h] mov [ebx + BS2REGS.rsp], eax mov [ebx + BS2REGS.rsp + 4], ecx mov eax, [ebp + 1ch] mov [ebx + BS2REGS.ss], ax mov eax, [ebp + 24h] mov [ebx + BS2REGS.ds], ax mov eax, [ebp + 20h] mov [ebx + BS2REGS.es], ax mov eax, [ebp + 28h] mov [ebx + BS2REGS.fs], ax mov eax, [ebp + 2ch] mov [ebx + BS2REGS.gs], ax ;jmp .do_crX .do_crX: ; The CRx registers are only accessible from ring-0 (CS=conforming, CPL < 0) test byte [ebx + BS2REGS.ss], 3 jnz .skip_crX mov eax, cr0 mov [ebx + BS2REGS.cr0], eax mov [ebx + BS2REGS.cr0 + 4], ecx mov eax, cr2 mov [ebx + BS2REGS.cr2], eax mov [ebx + BS2REGS.cr2 + 4], ecx mov eax, cr3 mov [ebx + BS2REGS.cr3], eax mov [ebx + BS2REGS.cr3 + 4], ecx mov eax, cr4 mov [ebx + BS2REGS.cr4], eax mov [ebx + BS2REGS.cr4 + 4], ecx mov [ebx + BS2REGS.cr8], ecx mov [ebx + BS2REGS.cr8 + 4], ecx .skip_crX: ; ; Advance to a prepared resume position or panic. ; cmp byte [g_fTrapPrepared], 0 je .no_resume_pos mov byte [g_fTrapPrepared], 0 mov eax, [g_TrapResumeRIP] mov [ebp + 0ch], eax .resume: %ifdef BS2_WITH_XCPT_DB_CLEARING_TF cmp byte [ebp + 04h], X86_XCPT_DB ; make sure we won't trap again due to a TF. jne .resume_no_clear_trap_flags and word [ebp + 14h], ~X86_EFL_TF .resume_no_clear_trap_flags: %endif pop ds pop ecx pop ebx pop eax ;popfd leave add esp, 8h iret .no_resume_pos: ; ; Look for a trap record. ; mov ecx, [g_cTrapRecs] ; the number of records. test ecx, ecx jz .panic mov eax, [g_LastTrapRegs + BS2REGS.rip] sub eax, [g_pTrapRecBase] ; the offWhere we're looking for. jb .panic ; Look starting at the previous record first. mov ebx, [g_iTrapRecLast] sub ecx, ebx jbe .traprec_loop2 ; g_iTrapRecLast is out of range. shl ebx, BS2TRAPREC_SIZE_SHIFT add ebx, [g_paTrapRecs] ; ebx points to the record we hit last time. .traprec_loop1_next: cmp [ebx + BS2TRAPREC.offWhere], eax je .traprec_found add ebx, BS2TRAPREC_size dec ecx jnz .traprec_loop1_next ; Start searching from the start, stopping at the previous record. .traprec_loop2: mov ecx, [g_iTrapRecLast] or ecx, ecx jz .panic ; not found. mov ebx, [g_paTrapRecs] .traprec_loop2_next: cmp [ebx + BS2TRAPREC.offWhere], eax je .traprec_found add ebx, BS2TRAPREC_size dec ecx jnz .traprec_loop2_next jmp .panic ; not found .traprec_found: ; Remember the hit for the next trap. mov eax, ebx sub eax, [g_paTrapRecs] shr eax, BS2TRAPREC_SIZE_SHIFT mov [g_iTrapRecLast], eax ; ; Fail the test if we got the wrong trap or error code. ; mov al, [g_u8LastTrapNo] cmp al, [ebx + BS2TRAPREC.u8TrapNo] je .traprec_ok_trap push eax movzx eax, byte [ebx + BS2TRAPREC.u8TrapNo] push eax push .s_szWrongTrap call NAME(TestFailedF_p32) add esp, 12 .traprec_ok_trap: mov ax, [g_u64LastTrapErr] cmp ax, [ebx + BS2TRAPREC.u16ErrCd] je .traprec_ok_err_cd push eax movzx eax, word [ebx + BS2TRAPREC.u16ErrCd] push eax push .s_szWrongErrCd call NAME(TestFailedF_p32) add esp, 12 .traprec_ok_err_cd: ; ; Advance the EIP and resume execution. ; movzx eax, byte [ebx + BS2TRAPREC.offResumeAddend] add eax, [g_LastTrapRegs + BS2REGS.rip] mov [ebp + 0ch], eax jmp .resume ; ; Write panic message and then halt. ; .panic: push dword [g_LastTrapRegs + BS2REGS.rflags] push dword [g_LastTrapRegs + BS2REGS.ss] push dword [g_LastTrapRegs + BS2REGS.gs] push dword [g_LastTrapRegs + BS2REGS.fs] push dword [g_LastTrapRegs + BS2REGS.es] push dword [g_LastTrapRegs + BS2REGS.ds] push dword [g_LastTrapRegs + BS2REGS.cs] ; line break push dword [g_LastTrapRegs + BS2REGS.cr4] push dword [g_LastTrapRegs + BS2REGS.cr3] push dword [g_LastTrapRegs + BS2REGS.cr0] push dword [g_LastTrapRegs + BS2REGS.rbp] push dword [g_LastTrapRegs + BS2REGS.rsp] push dword [g_LastTrapRegs + BS2REGS.rip] ; line break push dword [g_LastTrapRegs + BS2REGS.rdi] push dword [g_LastTrapRegs + BS2REGS.rsi] push dword [g_LastTrapRegs + BS2REGS.rdx] push dword [g_LastTrapRegs + BS2REGS.rcx] push dword [g_LastTrapRegs + BS2REGS.rbx] push dword [g_LastTrapRegs + BS2REGS.rax] ; line break mov eax, [ebp + 08h] push eax mov eax, cr2 push eax mov eax, [ebp + 0ch] push eax movzx eax, word [ebp + 10h] push eax movzx eax, byte [ebp + 04h] push eax push .s_szPanicMsg call NAME(TestFailedF_p32) call Bs2Panic jmp .panic ; paranoia .s_szPanicMsg: db 'trap #%RX8 at %RX16:%RX32 cr2=%RX32 err=%RX32', 13, 10 db 'eax=%RX32 ebx=%RX32 ecx=%RX32 edx=%RX32 esi=%RX32 edi=%RX32', 13, 10 db 'eip=%RX32 esp=%RX32 ebp=%RX32 cr0=%RX32 cr3=%RX32 cr4=%RX32', 13, 10 db 'cs=%RX16 ds=%RX16 es=%RX16 fs=%RX16 gs=%RX16 ss=%RX16 eflags=%RX32', 13, 10 db 0 .s_szWrongTrap: db 'Expected trap %RX8 got %RX8', 13, 10, 0 .s_szWrongErrCd: db 'Expected errcd %RX16 got %RX16', 13, 10, 0 ENDPROC bs2Trap_XX_32bit ;; ; Service IRQ handler, 32-bit version. ; ; Takes requests in eax and later maybe parameters in other registers. ; ; return GS ebp + 24h - v86 ; return FS ebp + 20h - v86 ; return DS ebp + 1ch - v86 ; return ES ebp + 18h - v86 ; return SS ebp + 14h - higher privilege ; return ESP ebp + 10h - higher privilege ; return EFLAGS ebp + 0ch ; return CS ebp + 08h ; return EIP ebp + 04h BEGINCODELOW BEGINPROC bs2TrapService32bit jmp .highsegment BEGINCODEHIGH .highsegment: push ebp ; ebp mov ebp, esp push eax ; ebp - 04h push edx ; ebp - 08h push ecx ; ebp - 0ch push ebx ; ebp - 10h push ds ; ebp - 14h mov dx, ss mov ds, dx ; ; Classify the caller context in cl. ;; @todo What if CS on the stack is conforming? ; %define BS2_TRP_SRV_CALLER_SAME_RING 0 %define BS2_TRP_SRV_CALLER_OTHER_RING 1 %define BS2_TRP_SRV_CALLER_VM 2 test dword [ebp + 0ch], X86_EFL_VM jnz .vm_ctx mov cx, ss mov ch, [ebp + 08h] ; cs and cx, 00303h cmp ch, cl jz .same_ctx mov cl, BS2_TRP_SRV_CALLER_OTHER_RING jmp .done_ctx .vm_ctx: mov cl, BS2_TRP_SRV_CALLER_VM jmp .done_ctx .same_ctx: mov cl, BS2_TRP_SRV_CALLER_SAME_RING .done_ctx: ; ; Switch (eax). ; cmp eax, BS2_SYSCALL_TO_RING3 jbe .to_ringX ; Unknown request. .failure: mov eax, -1 .return: ; careful with ebp here! pop ds pop ebx pop ecx pop edx ;pop eax leave iretd ; ; Switching to the ring specified by eax. ; Annoying that ss:esp isn't always restored. ; .to_ringX: cmp cl, BS2_TRP_SRV_CALLER_VM je .failure sub al, BS2_SYSCALL_TO_RING0 ; Fake missing stack registers if necessary. cmp cl, BS2_TRP_SRV_CALLER_SAME_RING jnz .have_stack_regs sub esp, 8h sub ebp, 8h xor ebx, ebx .move_more: mov edx, [esp + 8 + ebx] mov [esp + ebx], edx add ebx, 4 cmp ebx, 9*4 jb .move_more mov dx, ss mov [ebp + 14h], edx lea edx, [ebp + 18h] mov [ebp + 10h], edx .have_stack_regs: ; Translate the selector registers mov dx, [ebp - 14h] call bs2SRegToRing mov [ebp - 14h], dx mov dx, es call bs2SRegToRing mov es, dx mov dx, fs call bs2SRegToRing mov fs, dx mov dx, gs call bs2SRegToRing mov gs, dx mov dx, [ebp + 08h] ; cs call bs2SRegToRing mov [ebp + 08h], dx mov dx, [ebp + 14h] ; ss call bs2SRegToRing mov [ebp + 14h], dx or dword [ebp + 0ch], X86_EFL_IOPL ; set IOPL=3 ; If the desired target is ring-0 we cannot use iret. cmp al, 0 je .iret_to_ring_with_stack .done_success: xor eax, eax jmp .return .iret_to_ring_with_stack: ; ; Move the iret-to-same-ring to the desired return position. By also ; moving the saved ebp we make the leave instruction do stack ; adjusting/switching for us. ; cli ; paranoia, it's disable already. mov eax, [ebp + 10h] lea edx, [ebp + 18h] cmp eax, edx lea ecx, [ebp + 08h] ; same stack, just shifted 8 bytes je .move_iret_and_ebp mov ecx, [ebp + 10h] ; different stack. sub ecx, 10h .move_iret_and_ebp: mov edx, [ebp + 0ch] mov eax, [ebp + 08h] mov [ecx + 0ch], edx mov [ecx + 08h], eax mov edx, [ebp + 04h] mov eax, [ebp + 00h] mov [ecx + 04h], edx mov [ecx + 00h], eax mov ebp, ecx xor eax, eax jmp .return ENDPROC bs2TrapService32bit %endif ; BS2_INC_CMN_PM %ifdef BS2_INC_CMN_LM ; ; 64-bit TSS (X86TSS64). ; BEGINCODELOW ALIGNDATA(16) bs2Tss64Bit: dd 0 ; 00h - u32Reserved - Reserved. dq BS2_R0_STACK_ADDR ; 04h - rsp0 - Ring-0 stack pointer. (static) dq BS2_R1_STACK_ADDR ; 1ch - rsp1 - Ring-1 stack pointer. (static) dq BS2_R2_STACK_ADDR ; 14h - rsp2 - Ring-2 stack pointer. (static) dq 0 ; 2ch - reserved dq BS2_DF_R0_STACK_ADDR ; 24h - ist1; dq BS2_R0_STACK_ADDR ; 3ch - ist2; dq BS2_R0_STACK_ADDR ; 34h - ist3; dq BS2_R0_STACK_ADDR ; 4ch - ist4; dq BS2_R0_STACK_ADDR ; 44h - ist5; dq BS2_R0_STACK_ADDR ; 5ch - ist6; dq BS2_R0_STACK_ADDR ; 54h - ist7; dw 0,0,0,0,0 ; 6ch - reserved dw 0 ; 76h - offIoBitmap - Offset relative to the TSS of the ; 00h - start of the I/O Bitmap and the end of the ; 00h - interrupt redirection bitmap. bs2Tss64BitEnd: times (68h - (bs2Tss64BitEnd - bs2Tss64Bit)) db 0 times ((bs2Tss64BitEnd - bs2Tss64Bit) - 68h) db 0 ; ; 64-bit IDT (X86DESC64GATE). ; BEGINCODELOW ALIGNDATA(16) bs2Idt64bit: dw bs2Trap_00h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_01h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_02h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate bs2Idt64bit_BP: dw bs2Trap_03h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_04h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_05h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_06h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_07h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_08h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_09h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0ah_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0bh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0ch_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0dh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0eh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_0fh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_10h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_11h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_12h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_13h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_14h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_15h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_16h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_17h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_18h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_19h_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1ah_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1bh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1ch_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1dh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1eh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2Trap_1fh_64bit, BS2_SEL_CS64, 08e00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=0 type=int64gate dw bs2TrapService64bit,BS2_SEL_CS64,0ee00h, 00000h, 0, 0, 0, 0 ; p=1 dpl=3 type=int64gate bs2Idt64bitEnd ; ; 64-bit trap handlers. ; BITS 64 %macro bs2Trap_XX_64bit_macro 1 BEGINCODELOW bs2Trap_ %+ %1 %+ _64bit: push %1 jmp bs2Trap_XX_64bit %endmacro %macro bs2Trap_XX_64bit_macro_no_err 1 bs2Trap_ %+ %1 %+ _64bit: push 0 push %1 jmp bs2Trap_XX_64bit %endmacro bs2Trap_XX_64bit_macro_no_err 00h bs2Trap_XX_64bit_macro_no_err 01h bs2Trap_XX_64bit_macro_no_err 02h bs2Trap_XX_64bit_macro_no_err 03h bs2Trap_XX_64bit_macro_no_err 04h bs2Trap_XX_64bit_macro_no_err 05h bs2Trap_XX_64bit_macro_no_err 06h bs2Trap_XX_64bit_macro_no_err 07h bs2Trap_XX_64bit_macro 08h bs2Trap_XX_64bit_macro_no_err 09h bs2Trap_XX_64bit_macro 0ah bs2Trap_XX_64bit_macro 0bh bs2Trap_XX_64bit_macro 0ch bs2Trap_XX_64bit_macro 0dh bs2Trap_XX_64bit_macro 0eh bs2Trap_XX_64bit_macro_no_err 0fh bs2Trap_XX_64bit_macro_no_err 10h bs2Trap_XX_64bit_macro 11h bs2Trap_XX_64bit_macro_no_err 12h bs2Trap_XX_64bit_macro_no_err 13h bs2Trap_XX_64bit_macro_no_err 14h bs2Trap_XX_64bit_macro_no_err 15h bs2Trap_XX_64bit_macro_no_err 16h bs2Trap_XX_64bit_macro_no_err 17h bs2Trap_XX_64bit_macro_no_err 18h bs2Trap_XX_64bit_macro_no_err 19h bs2Trap_XX_64bit_macro_no_err 1ah bs2Trap_XX_64bit_macro_no_err 1bh bs2Trap_XX_64bit_macro_no_err 1ch bs2Trap_XX_64bit_macro_no_err 1dh bs2Trap_XX_64bit_macro_no_err 1eh bs2Trap_XX_64bit_macro_no_err 1fh ;; ; Common 64-bit trap handler. ; ; return SS rbp + 38h ; return RSP rbp + 30h ; return RFLAGS rbp + 28h ; return CS rbp + 20h ; return RIP rbp + 18h ; error code rbp + 10h ; vector # rbp + 08h BEGINCODEHIGH BEGINPROC bs2Trap_XX_64bit push rbp ; rbp + 00h mov rbp, rsp pushfq ; rbp - 08h push rax ; rbp - 10h push rbx ; rbp - 18h ; ; Benchmark mode? Then resume the action right away! ; mov rax, [rbp + 08h] cmp [g_u8TrapBenchmarkNo], al jne .test_mode cmp byte [g_fTrapPrepared], 0 je .test_mode mov rax, [g_TrapResumeRIP] mov [rbp + 18h], rax pop rbx ;pop rax ;popfq leave add rsp, 10h ; Skip the vector # and error code. xor rax, rax iretq ; ; Save the trap information ; .test_mode: inc dword [g_u32cTraps] mov rax, [rbp + 08h] mov [g_u8LastTrapNo], al mov rax, [rbp + 10h] mov [g_u64LastTrapErr], rax mov rax, [rbp - 08h] mov [g_u64LastTrapHandlerRFlags], rax mov ax, cs mov [g_u16LastTrapHandlerCS], ax mov ax, ss mov [g_u16LastTrapHandlerSS], ax lea rax, [rbp + 8] mov [g_u64LastTrapHandlerRSP], rax ; Save the registers. lea rbx, [g_LastTrapRegs] mov rax, [rbp - 10h] mov [rbx + BS2REGS.rax], rax mov rax, [rbp - 18h] mov [rbx + BS2REGS.rbx], rax mov [rbx + BS2REGS.rcx], rcx mov [rbx + BS2REGS.rdx], rdx mov [rbx + BS2REGS.rdi], rdi mov [rbx + BS2REGS.rsi], rsi mov rax, [rbp] mov [rbx + BS2REGS.rbp], rax mov rax, [rbp + 30h] mov [rbx + BS2REGS.rsp], rax mov rax, [rbp + 18h] mov [rbx + BS2REGS.rip], rax mov [rbx + BS2REGS.r8], r8 mov [rbx + BS2REGS.r9], r9 mov [rbx + BS2REGS.r10], r10 mov [rbx + BS2REGS.r11], r11 mov [rbx + BS2REGS.r12], r12 mov [rbx + BS2REGS.r13], r13 mov [rbx + BS2REGS.r14], r14 mov [rbx + BS2REGS.r15], r15 mov rax, [rbp + 28h] mov [rbx + BS2REGS.rflags], rax mov rax, [rbp + 20h] mov [rbx + BS2REGS.cs], ax mov [rbx + BS2REGS.ds], ds mov [rbx + BS2REGS.es], es mov [rbx + BS2REGS.fs], fs mov [rbx + BS2REGS.gs], gs mov rax, [rbp + 38h] mov [rbx + BS2REGS.ss], ax mov [rbx + BS2REGS.cBits], byte 64 ; The CRx registers are only accessible from ring-0 (CS=conforming, CPL < 0) test byte [rbx + BS2REGS.ss], 3 jnz .skip_crX mov rax, cr0 mov [rbx + BS2REGS.cr0], rax mov rax, cr2 mov [rbx + BS2REGS.cr2], rax mov rax, cr3 mov [rbx + BS2REGS.cr3], rax mov rax, cr4 mov [rbx + BS2REGS.cr4], rax mov rax, cr8 mov [rbx + BS2REGS.cr8], rax .skip_crX: ; ; Advance to a prepared resume position or panic. ; cmp byte [g_fTrapPrepared], 0 je .no_resume_pos mov byte [g_fTrapPrepared], 0 mov rax, [g_TrapResumeRIP] mov [rbp + 18h], rax jmp .resume .resume: %ifdef BS2_WITH_XCPT_DB_CLEARING_TF cmp byte [rbp + 08h], X86_XCPT_DB ; make sure we won't trap again due to a TF. jne .resume_no_clear_trap_flags and word [rbp + 28h], ~X86_EFL_TF .resume_no_clear_trap_flags: %endif pop rbx pop rax ;popfq leave add rsp, 10h iretq .no_resume_pos: ; ; Look for a trap record. ; push rcx mov ecx, [g_cTrapRecs] ; the number of records. test ecx, ecx jz .panic mov rax, [g_LastTrapRegs + BS2REGS.rip] sub rax, [g_pTrapRecBase] ; the offWhere we're looking for. jb .panic mov rbx, _4G cmp rax, rbx jae .panic ; out of range. ; Look starting at the previous record first. mov ebx, [g_iTrapRecLast] sub ecx, ebx jbe .traprec_loop2 ; g_iTrapRecLast is out of range. shl rbx, BS2TRAPREC_SIZE_SHIFT add rbx, [g_paTrapRecs] ; ebx points to the record we hit last time. .traprec_loop1_next: cmp [rbx + BS2TRAPREC.offWhere], eax je .traprec_found add rbx, BS2TRAPREC_size dec ecx jnz .traprec_loop1_next ; Start searching from the start, stopping at the previous record. .traprec_loop2: mov ecx, [g_iTrapRecLast] or ecx, ecx jz .panic ; not found. mov rbx, [g_paTrapRecs] .traprec_loop2_next: cmp [rbx + BS2TRAPREC.offWhere], eax je .traprec_found add rbx, BS2TRAPREC_size dec ecx jnz .traprec_loop2_next jmp .panic ; not found .traprec_found: ; Remember the hit for the next trap. mov rax, rbx sub rax, [g_paTrapRecs] shr rax, BS2TRAPREC_SIZE_SHIFT mov [g_iTrapRecLast], eax ; ; Fail the test if we got the wrong trap or error code. ; mov al, [g_u8LastTrapNo wrt rip] cmp al, [rbx + BS2TRAPREC.u8TrapNo] je .traprec_ok_trap push rax movzx rax, byte [rbx + BS2TRAPREC.u8TrapNo] push rax push .s_szWrongTrap call NAME(TestFailedF_p64) add rsp, 24 .traprec_ok_trap: mov ax, [g_u64LastTrapErr wrt rip] cmp ax, [rbx + BS2TRAPREC.u16ErrCd] je .traprec_ok_err_cd push rax movzx rax, word [rbx + BS2TRAPREC.u16ErrCd] push rax push .s_szWrongErrCd call NAME(TestFailedF_p64) add rsp, 24 .traprec_ok_err_cd: ; ; Advance the EIP and resume execution. ; movzx rax, byte [rbx + BS2TRAPREC.offResumeAddend] add rax, [g_LastTrapRegs + BS2REGS.rip] mov [rbp + 18h], rax pop rcx jmp .resume ; ; Format a panic message and halt. ; .panic: lea rbx, [g_LastTrapRegs] ; line break movzx eax, word [rbx + BS2REGS.ss] push rax movzx eax, word [rbx + BS2REGS.gs] push rax movzx eax, word [rbx + BS2REGS.fs] push rax movzx eax, word [rbx + BS2REGS.es] push rax movzx eax, word [rbx + BS2REGS.ds] push rax movzx eax, word [rbx + BS2REGS.cs] push rax ; line break push qword [rbx + BS2REGS.rbp] push qword [rbx + BS2REGS.rsp] push qword [rbx + BS2REGS.rip] ; line break push qword [rbx + BS2REGS.rflags] push qword [rbx + BS2REGS.r15] push qword [rbx + BS2REGS.r14] ; line break push qword [rbx + BS2REGS.r13] push qword [rbx + BS2REGS.r12] push qword [rbx + BS2REGS.r11] ; line break push qword [rbx + BS2REGS.r10] push qword [rbx + BS2REGS.r9] push qword [rbx + BS2REGS.r8] ; line break push qword [rbx + BS2REGS.rdi] push qword [rbx + BS2REGS.rsi] push qword [rbx + BS2REGS.rdx] ; line break push qword [rbx + BS2REGS.rcx] push qword [rbx + BS2REGS.rbx] push qword [rbx + BS2REGS.rax] ; line break mov eax, [rbx + BS2REGS.cr8] push rax mov eax, [rbx + BS2REGS.cr4] push rax mov eax, [rbx + BS2REGS.cr3] push rax mov eax, [rbx + BS2REGS.cr0] push rax ; line break push qword [rbp + 10h] push qword [rbx + BS2REGS.cr2] push qword [rbx + BS2REGS.rip] movzx eax, word [rbp + BS2REGS.ss] push rax movzx eax, byte [rbp + 08h] push rax push .s_szPanicMsg call NAME(TestFailedF_p64) call Bs2Panic jmp .panic ; paranoia .s_szPanicMsg: db 'trap #%RX8 at %RX16:%RX64 cr2=%RX64 err=%RX64', 13, 10 db 'cr0=%RX64 cr3=%RX64 cr4=%RX64 cr8=%RX16', 13, 10 db 'rax=%RX64 rbx=%RX64 rcx=%RX64', 13, 10 db 'rdx=%RX64 rsi=%RX64 rdi=%RX64', 13, 10 db 'r8 =%RX64 r9 =%RX64 r10=%RX64', 13, 10 db 'r11=%RX64 r12=%RX64 r13=%RX64', 13, 10 db 'r14=%RX64 r15=%RX64 rfl=%RX64', 13, 10 db 'rip=%RX64 rsp=%RX64 rbp=%RX64 ', 13, 10 db 'cs=%RX16 ds=%RX16 es=%RX16 fs=%RX16 gs=%RX16 ss=%RX16', 13, 10 db 0 .s_szWrongTrap: db 'Expected trap %RX8 got %RX8', 13, 10, 0 .s_szWrongErrCd: db 'Expected errcd %RX16 got %RX16', 13, 10, 0 ENDPROC bs2Trap_XX_64bit ;; ; Service IRQ handler. ; ; Takes requests in eax and later maybe parameters in other registers. ; ; return SS rbp + 28h ; return RSP rbp + 20h ; return RFLAGS rbp + 18h ; return CS rbp + 10h ; return RIP rbp + 08h BEGINCODELOW BEGINPROC bs2TrapService64bit jmp .highsegment BEGINCODEHIGH .highsegment: push rbp mov rbp, rsp push rax push rdx push rcx ; ; Switch (eax). ; cmp eax, BS2_SYSCALL_TO_RING3 jbe .to_ringX ; Unknown request. mov rax, -1 .return: pop rcx pop rdx ;pop rax leave iretq ; ; Switching to the ring specified by eax. ; .to_ringX: sub eax, BS2_SYSCALL_TO_RING0 ; al = new ring number. mov dx, ds call bs2SRegToRing mov ds, dx mov dx, es call bs2SRegToRing mov es, dx mov dx, fs call bs2SRegToRing mov fs, dx mov dx, gs call bs2SRegToRing mov gs, dx mov dx, [rbp + 10h] ; cs call bs2SRegToRing mov [rbp + 10h], dx mov dx, [rbp + 28h] ; ss call bs2SRegToRing mov [rbp + 28h], dx or dword [ebp + 18h], X86_EFL_IOPL ; set IOPL=3 jmp .done_success .done_success: xor eax, eax jmp .return ENDPROC bs2TrapService64bit %endif ; BS2_INC_CMN_LM ;; ; Converts a segment value (dx) to the ring specified by al. ; ; If the selector isn't a known CS, DS or SS selector it will be set to null. ; ; @returns dx ; @param al The desired ring. ; @param dx The segment to convert. ; ; @remarks WARNING! This has to work exactly the same both in 32-bit and 64-bit mode. ; BEGINCODEHIGH BITS 32 BEGINPROC bs2SRegToRing ; ; Classify the incoming selector. ; cmp dx, BS2_SEL_R0_BASE jb .null cmp dx, BS2_SEL_R0_BASE + BS2_SEL_GRP_SIZE jb .ring0 cmp dx, BS2_SEL_R1_BASE jb .miss cmp dx, BS2_SEL_R1_BASE + BS2_SEL_GRP_SIZE jb .ring1 cmp dx, BS2_SEL_R2_BASE jb .miss cmp dx, BS2_SEL_R2_BASE + BS2_SEL_GRP_SIZE jb .ring2 cmp dx, BS2_SEL_R3_BASE jb .miss cmp dx, BS2_SEL_R3_BASE + BS2_SEL_GRP_SIZE jb .ring3 jmp .miss ; ; Convert the incoming selector to ring-0 and then from ring-0 to the ; desired one. ; .ring0: cmp al, 0 je .done add dx, BS2_SEL_R1_BASE - BS2_SEL_R0_BASE cmp al, 1 je .done add dx, BS2_SEL_R2_BASE - BS2_SEL_R1_BASE cmp al, 2 je .done add dx, BS2_SEL_R3_BASE - BS2_SEL_R2_BASE cmp al, 3 je .done .panic: hlt jmp .panic .ring1: sub dx, BS2_SEL_R1_BASE - BS2_SEL_R0_BASE jmp .ring0 .ring2: sub dx, BS2_SEL_R2_BASE - BS2_SEL_R0_BASE jmp .ring0 .ring3: sub dx, BS2_SEL_R3_BASE - BS2_SEL_R0_BASE jmp .ring0 .done: and dl, ~3h or dl, al ; set the RPL ret .miss: .null: xor dx, dx ret ENDPROC bs2SRegToRing BEGINCODELOW