;/*++ BUILD Version: 0001 // Increment this if a change has global effects ; ;Copyright (c) 1993 Microsoft Corporation ; ;Module Name: ; ; i8042log.mc ; ;Abstract: ; ; Constant definitions for the I/O error code log values. ; ;Revision History: ; ;--*/ ; ;#ifndef _I8042LOG_ ;#define _I8042LOG_ ; ;// ;// Status values are 32 bit values layed out as follows: ;// ;// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 ;// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 ;// +---+-+-------------------------+-------------------------------+ ;// |Sev|C| Facility | Code | ;// +---+-+-------------------------+-------------------------------+ ;// ;// where ;// ;// Sev - is the severity code ;// ;// 00 - Success ;// 01 - Informational ;// 10 - Warning ;// 11 - Error ;// ;// C - is the Customer code flag ;// ;// Facility - is the facility code ;// ;// Code - is the facility's status code ;// ; MessageIdTypedef=NTSTATUS SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS Informational=0x1:STATUS_SEVERITY_INFORMATIONAL Warning=0x2:STATUS_SEVERITY_WARNING Error=0x3:STATUS_SEVERITY_ERROR ) FacilityNames=(System=0x0 RpcRuntime=0x2:FACILITY_RPC_RUNTIME RpcStubs=0x3:FACILITY_RPC_STUBS Io=0x4:FACILITY_IO_ERROR_CODE i8042prt=0x5:FACILITY_I8042_ERROR_CODE ) MessageId=0x0001 Facility=i8042prt Severity=Error SymbolicName=I8042_INSUFFICIENT_RESOURCES Language=English Not enough memory was available to allocate internal storage needed for the device %1. . MessageId=0x0002 Facility=i8042prt Severity=Error SymbolicName=I8042_NO_BUFFER_ALLOCATED Language=English Not enough memory was available to allocate the ring buffer that holds incoming data for %1. . MessageId=0x0003 Facility=i8042prt Severity=Error SymbolicName=I8042_REGISTERS_NOT_MAPPED Language=English The hardware locations for %1 could not be translated to something the memory management system understands. . MessageId=0x0004 Facility=i8042prt Severity=Error SymbolicName=I8042_RESOURCE_CONFLICT Language=English The hardware resources for %1 are already in use by another device. . MessageId=0x0005 Facility=i8042prt Severity=Informational SymbolicName=I8042_NOT_ENOUGH_CONFIG_INFO Language=English Some firmware configuration information was incomplete, so defaults were used. . MessageId=0x0006 Facility=i8042prt Severity=Informational SymbolicName=I8042_USER_OVERRIDE Language=English User configuration data is overriding firmware configuration data. . MessageId=0x0007 Facility=i8042prt Severity=Warning SymbolicName=I8042_NO_DEVICEMAP_CREATED Language=English Unable to create the device map entry for %1. . MessageId=0x0008 Facility=i8042prt Severity=Warning SymbolicName=I8042_NO_DEVICEMAP_DELETED Language=English Unable to delete the device map entry for %1. . MessageId=0x0009 Facility=i8042prt Severity=Error SymbolicName=I8042_NO_INTERRUPT_CONNECTED Language=English Could not connect the interrupt for %1. . MessageId=0x000A Facility=i8042prt Severity=Error SymbolicName=I8042_INVALID_ISR_STATE Language=English The ISR has detected an internal state error in the driver for %1. . MessageId=0x000B Facility=i8042prt Severity=Informational SymbolicName=I8042_KBD_BUFFER_OVERFLOW Language=English The ring buffer that stores incoming keyboard data has overflowed (buffer size is configurable via the registry). . MessageId=0x000C Facility=i8042prt Severity=Informational SymbolicName=I8042_MOU_BUFFER_OVERFLOW Language=English The ring buffer that stores incoming mouse data has overflowed (buffer size is configurable via the registry). . MessageId=0x000D Facility=i8042prt Severity=Error SymbolicName=I8042_INVALID_STARTIO_REQUEST Language=English The Start I/O procedure has detected an internal error in the driver for %1. . MessageId=0x000E Facility=i8042prt Severity=Error SymbolicName=I8042_INVALID_INITIATE_STATE Language=English The Initiate I/O procedure has detected an internal state error in the driver for %1. . MessageId=0x000F Facility=i8042prt Severity=Error SymbolicName=I8042_KBD_RESET_COMMAND_FAILED Language=English The keyboard reset failed. . MessageId=0x0010 Facility=i8042prt Severity=Error SymbolicName=I8042_MOU_RESET_COMMAND_FAILED Language=English The mouse reset failed. . MessageId=0x0011 Facility=i8042prt Severity=Warning SymbolicName=I8042_KBD_RESET_RESPONSE_FAILED Language=English The device sent an incorrect response(s) following a keyboard reset. . MessageId=0x0012 Facility=i8042prt Severity=Warning SymbolicName=I8042_MOU_RESET_RESPONSE_FAILED Language=English The device sent an incorrect response(s) following a mouse reset. . MessageId=0x0013 Facility=i8042prt Severity=Error SymbolicName=I8042_SET_TYPEMATIC_FAILED Language=English Could not set the keyboard typematic rate and delay. . MessageId=0x0014 Facility=i8042prt Severity=Error SymbolicName=I8042_SET_LED_FAILED Language=English Could not set the keyboard indicator lights. . MessageId=0x0015 Facility=i8042prt Severity=Error SymbolicName=I8042_SELECT_SCANSET_FAILED Language=English Could not tell the hardware to send keyboard scan codes in the set expected by the driver. . MessageId=0x0016 Facility=i8042prt Severity=Error SymbolicName=I8042_SET_SAMPLE_RATE_FAILED Language=English Could not set the mouse sample rate. . MessageId=0x0017 Facility=i8042prt Severity=Error SymbolicName=I8042_SET_RESOLUTION_FAILED Language=English Could not set the mouse resolution. . MessageId=0x0018 Facility=i8042prt Severity=Error SymbolicName=I8042_MOU_ENABLE_XMIT Language=English Could not enable transmissions from the mouse. . MessageId=0x0019 Facility=i8042prt Severity=Warning SymbolicName=I8042_NO_SYMLINK_CREATED Language=English Unable to create the symbolic link for %1. . MessageId=0x001A Facility=i8042prt Severity=Error SymbolicName=I8042_RETRIES_EXCEEDED Language=English Exceeded the allowable number of retries (configurable via the registry) on device %1. . MessageId=0x001B Facility=i8042prt Severity=Error SymbolicName=I8042_TIMEOUT Language=English The operation on %1 timed out (time out is configurable via the registry). . MessageId=0x001C Facility=i8042prt Severity=Informational SymbolicName=I8042_CCB_WRITE_FAILED Language=English Could not successfully write the Controller Command Byte for the i8042. . MessageId=0x001D Facility=i8042prt Severity=Informational SymbolicName=I8042_UNEXPECTED_ACK Language=English An unexpected ACKNOWLEDGE was received from the device. . MessageId=0x001E Facility=i8042prt Severity=Warning SymbolicName=I8042_UNEXPECTED_RESEND Language=English An unexpected RESEND was received from the device. . MessageId=0x001F Facility=i8042prt Severity=Informational SymbolicName=I8042_NO_MOU_DEVICE Language=English No mouse port ("PS/2 compatible") mouse device was detected on the i8042 auxiliary port (not a problem unless this type of mouse really is connected). . MessageId=0x0020 Facility=i8042prt Severity=Warning SymbolicName=I8042_NO_KBD_DEVICE Language=English The keyboard device does not exist or was not detected. . MessageId=0x0021 Facility=i8042prt Severity=Warning SymbolicName=I8042_NO_SUCH_DEVICE Language=English The keyboard and mouse devices do not exist or were not detected. . MessageId=0x0022 Facility=i8042prt Severity=Error SymbolicName=I8042_ERROR_DURING_BUTTONS_DETECT Language=English An error occurred while trying to determine the number of mouse buttons. . MessageId=0x0023 Facility=i8042prt Severity=Informational SymbolicName=I8042_UNEXPECTED_MOUSE_RESET Language=English An unexpected RESET was detected from the mouse device. . MessageId=0x0024 Facility=i8042prt Severity=Warning SymbolicName=I8042_UNEXPECTED_WHEEL_MOUSE_RESET Language=English An unexpected RESET was detected from the mouse device. The wheel has been deactivated. . ;#endif /* _I8042LOG_ */