# $Id: Makefile.kmk 29933 2010-06-01 01:40:46Z vboxsync $
## @file
# Top level makefile.
#

#
# Copyright (C) 2006-2010 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

SUB_DEPTH = .
include $(KBUILD_PATH)/subheader.kmk

#
# Sub-makefiles / Sub-directories.
#
ifdef VBOX_SINGLE_MAKEFILE
 if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS) && !defined(VBOX_ONLY_TESTSUITE)
  include $(PATH_SUB_CURRENT)/doc/manual/Makefile.kmk
 endif
 include $(PATH_SUB_CURRENT)/src/Makefile.kmk
else
 if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS) && !defined(VBOX_ONLY_TESTSUITE)
  SUBDIRS = doc/manual
 endif
 SUBDIRS += src
endif


#
# Clean up global stuff that Config.kmk generates.
#
OTHER_CLEAN += \
	$(VBOX_PACKAGE_HEADER) \
	$(VBOX_LICENSE_VER_KMK) \
	$(VBOX_VERSION_MK) \
	$(VBOX_VERSION_HEADER) \
	$(VBOX_VERSION_STAMP) \
	$(wildcard $(PATH_OUT)/version-stamp-*.*.*) \
	$(VBOX_SVN_REV_KMK).ts \
	$(VBOX_SVN_REV_KMK) \
	$(PATH_OUT)/GCCConfig.kmk


if !defined(VBOX_ONLY_ADDITIONS) && !defined(VBOX_ONLY_TESTSUITE) && !defined(VBOX_ONLY_DOCS) # -> line 412b ;-)

ifndef VBOX_OSE
 #
 # Install the license (and misc non-executable stuff).
 #
 INSTALLS += nobin
 nobin_INST = $(INST_BIN)
 nobin_MODE = 0644
 nobin_SOURCES =
 ifdef VBOX_LICENSE_FILES
  nobin_SOURCES += \
  	$(VBOX_BRAND_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER).html \
	$(foreach f,$(VBOX_INSTALLER_ADD_LANGUAGES),$(VBOX_BRAND_$(f)_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER)-$(f).html)
 endif
endif # !OSE


#
# Install external binaries (mostly redistributable parts of tools we use).
# This must be done *before* we build the manual.
#
# To avoid dragging in unnecessary tools and sdks here, we don't use the .win
# and .linux property suffixes.
#
INSTALLS += bin

bin_INST = $(INST_BIN)

# The SDL DLLs
if1of ($(KBUILD_TARGET), win os2)
 ifneq ($(VBOX_WITH_VBOXSDL)$(VBOX_WITH_VBOXBFE),)
  include $(KBUILD_PATH)/sdks/LIBSDL.kmk
  bin_SOURCES += \
	$(DLL_SDK_LIBSDL_SDL)
  ifdef VBOX_WITH_SECURELABEL
   bin_SOURCES += \
	$(DLL_SDK_LIBSDL_SDLTTF)
  endif
  ifeq ($(KBUILD_TARGET),os2)
   bin_SOURCES += \
	$(DLL_SDK_LIBSDL_FSLIB)
  endif
 endif
endif


# The compiler runtime DLLs.
ifeq ($(KBUILD_TARGET).$(VBOX_WITHOUT_COMPILER_REDIST),win.)
 ifdef VBOX_USE_VCC80
  include $(KBUILD_PATH)/tools/VCC80X86.kmk
  include $(KBUILD_PATH)/tools/VCC80AMD64.kmk
  bin_SOURCES.x86 += \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
  	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
  bin_SOURCES.amd64 += \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
  	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
  ifeq ($(VBOX_VCC_CRT_TYPE),d)
   bin_SOURCES.x86 += \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcr80d.dll=>Microsoft.VC80.DebugCRT/msvcr80d.dll \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcp80d.dll=>Microsoft.VC80.DebugCRT/msvcp80d.dll \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>testcase/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcr80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcr80d.dll \
   	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcp80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcp80d.dll
   bin_SOURCES.amd64 += \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcr80d.dll=>Microsoft.VC80.DebugCRT/msvcr80d.dll \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcp80d.dll=>Microsoft.VC80.DebugCRT/msvcp80d.dll \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>testcase/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcr80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcr80d.dll \
   	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcp80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcp80d.dll
  endif
 endif
 ifndef VBOX_USE_VCC80
  VBOX_INSTALL_VCC70_RT = 1
 endif
 ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),win.x86)
  VBOX_INSTALL_VCC70_RT = 1
 endif
 ifdef VBOX_INSTALL_VCC70_RT
  include $(KBUILD_PATH)/tools/VCC70.kmk

  ## @todo Move these defines to VCC70.
  DLL_TOOL_VCC70_MSVCR71 ?= $(PATH_TOOL_VCC70)/bin/msvcr71.dll
  ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCR71)),)
   bin_SOURCES += \
   	$(DLL_TOOL_VCC70_MSVCR71)=>msvcr71.dll \
   	$(DLL_TOOL_VCC70_MSVCR71)=>testcase/msvcr71.dll
  endif
  ifeq ($(VBOX_VCC_CRT_TYPE),d)
   DLL_TOOL_VCC70_MSVCR71D ?= $(PATH_TOOL_VCC70)/bin/msvcr71d.dll
   ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCR71D)),)
    bin_SOURCES += \
    	$(DLL_TOOL_VCC70_MSVCR71D)=>msvcr71d.dll \
    	$(DLL_TOOL_VCC70_MSVCR71D)=>testcase/msvcr71d.dll
   endif
  endif

  DLL_TOOL_VCC70_MSVCP71 ?= $(PATH_TOOL_VCC70)/bin/msvcp71.dll
  ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCP71)),)
   bin_SOURCES += \
	$(DLL_TOOL_VCC70_MSVCP71)=>msvcp71.dll \
	$(DLL_TOOL_VCC70_MSVCP71)=>testcase/msvcp71.dll
  endif
  ifeq ($(VBOX_VCC_CRT_TYPE),d)
   DLL_TOOL_VCC70_MSVCP71D ?= $(PATH_TOOL_VCC70)/bin/msvcp71d.dll
   ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCP71D)),)
    bin_SOURCES += \
 	$(DLL_TOOL_VCC70_MSVCP71D)=>msvcp71d.dll \
 	$(DLL_TOOL_VCC70_MSVCP71D)=>testcase/msvcp71d.dll
   endif
  endif

  DLL_TOOL_VCC70_MSVCRT  ?= $(PATH_TOOL_VCC70)/bin/msvcrt.dll
  ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCRT)),)
   bin_SOURCES += \
	$(DLL_TOOL_VCC70_MSVCRT)=>msvcrt.dll \
	$(DLL_TOOL_VCC70_MSVCRT)=>testcase/msvcrt.dll
  endif
 endif
endif


ifdef VBOX_WITH_QT4_SUN
#
# Install our Qt DLLs / Shared Objects / Frameworks.
# Note: The installer fixes the darwin .dylibs when hardening is enabled.
#
 INSTALLS += qt4-bin
 qt4-bin_MODE = 755
 ifeq ($(KBUILD_TARGET),darwin)
  qt4-bin_INST = $(INST_VIRTUALBOX)Contents/
  qt4-bin_SOURCES = $(foreach qtmod, QtCore QtGui QtNetwork $(if $(VBOX_GUI_USE_QGL), QtOpenGL,) \
   	,$(VBOX_PATH_QT4)/Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox=>Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox)
  ifdef VBOX_WITH_COCOA_QT
   qt4-bin_SOURCES += \
   	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib \
   	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib \
   	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib
  endif
  qt4-bin_SOURCES += \
  	$(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets.dylib=>MacOS/accessible/libqtaccessiblewidgets.dylib
  qt4-bin_SYMLINKS = $(foreach qtmod, QtCore QtGui QtNetwork $(if $(VBOX_GUI_USE_QGL), QtOpenGL,) \
  		,Frameworks/$(qtmod)VBox.framework/$(qtmod)VBox=>Versions/4/$(qtmod)VBox)
  ifdef VBOX_WITH_COCOA_QT
   qt4-bin_SYMLINKS += \
   	Frameworks/QtGuiVBox.framework/Resources=>Versions/4/Resources/
  endif
 else ifeq ($(KBUILD_TARGET),win)
  qt4-bin_INST = $(INST_BIN)
  qt4-bin_SOURCES = \
	$(VBOX_PATH_QT4_LIB)/QtCoreVBox4.dll \
	$(VBOX_PATH_QT4_LIB)/QtGuiVBox4.dll \
	$(VBOX_PATH_QT4_LIB)/QtNetworkVBox4.dll \
	$(if $(VBOX_GUI_USE_QGL), $(VBOX_PATH_QT4_LIB)/QtOpenGLVBox4.dll,) \
	$(VBOX_PATH_QT4)/plugins/accessible/qtaccessiblewidgets4.dll=>accessible/qtaccessiblewidgets4.dll
 else
  qt4-bin_INST = $(INST_BIN)
  qt4-bin_SOURCES = \
	$(VBOX_PATH_QT4_LIB)/libQtCoreVBox.so.4 \
	$(VBOX_PATH_QT4_LIB)/libQtGuiVBox.so.4 \
	$(VBOX_PATH_QT4_LIB)/libQtNetworkVBox.so.4 \
	$(if $(VBOX_GUI_USE_QGL), $(VBOX_PATH_QT4_LIB)/libQtOpenGLVBox.so.4,) \
	$(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets$(SUFF_DLL)=>accessible/libqtaccessiblewidgets$(SUFF_DLL)
 endif
endif # VBOX_WITH_QT4_SUN


#
# For building the combined package, just get the additions .ISO
# once for amd64 to prevent version inconsistences. In all other
# cases we get the .ISO per target architecture.
#
ifdef VBOX_WITH_ADDITIONS_FROM_BUILD_SERVER
 ifdef VBOX_WITH_COMBINED_PACKAGE
  ifeq ($(KBUILD_TARGET_ARCH),amd64)
   INSTALLS += buildserver-additions
  endif
 else
  INSTALLS += buildserver-additions
 endif

#
# Install additions iso from the build server.
# The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has
# been added to kBuild.
#
buildserver-additions_INST = $(INST_ADDITIONS_ISO)
buildserver-additions_MODE = 0644
buildserver-additions_SOURCES = $(PATH_TARGET)/VBoxGuestAdditions.iso
buildserver-additions_CLEANS = $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp

$(PATH_TARGET)/VBoxGuestAdditions.iso: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/additions.sh | $$(dir $$@)
	$(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
 ifneq ($(KBUILD_HOST),win)
	$(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
 else
	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-additions-affinity-hack
 endif
	$(CP) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp $(PATH_TARGET)/VBoxGuestAdditions.iso
	$(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp

 ifeq ($(KBUILD_HOST),win)
buildserver-additions-affinity-hack:
	$(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
 endif
endif


#
#
# Install documentation files (at the moment the .chm) from the build server.
#
ifdef VBOX_WITH_DOCS_FROM_BUILD_SERVER
## @todo r=bird: Too much mess now for $(PATH_TARGET); move to doc/manual/.
INSTALLS += buildserver-docs
buildserver-docs_INST = $(INST_BIN)
buildserver-docs_MODE = 0644
buildserver-docs_SOURCES = \
	$(addprefix $(PATH_TARGET)/, \
		VirtualBox.chm UserManual.pdf \
		$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))
buildserver-docs_CLEANS = \
	$(buildserver-docs_0_OUTDIR)/unpacked.ts \
	$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip \
	$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip.tmp \
	$(addprefix $(PATH_TARGET)/, \
		VirtualBox.chm UserManual.pdf \
		$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))

## @todo Hack to get at TOOL_ZIP_UNPACK; see if this can be integrated somehow...
include $(KBUILD_PATH)/tools/ZIP.kmk

$$(buildserver-docs_0_OUTDIR)/unpacked.ts +| $(PATH_TARGET)/VirtualBox.chm $(PATH_TARGET)/UserManual.pdf \
$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),$(PATH_TARGET)/VirtualBox_$(f).chm $(PATH_TARGET)/UserManual_$(f).pdf): \
		$$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip
	$(call MSG_L1,Unpacking documentation)
	$(QUIET)$(TOOL_ZIP_UNPACK) $(TOOL_ZIP_UNPACKFLAGS) -o $< -d $(PATH_TARGET)
	$(APPEND) -t $@ "done"

$$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/documentation.sh | $$(dir $$@)
	$(RM) -f $@ $@.tmp
 ifneq ($(KBUILD_HOST),win)
	$(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename $@.tmp
 else
	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-documentation-affinity-hack
 endif
	$(CP) -f $@.tmp $@
	$(RM) -f $@.tmp
## @todo kBuild: The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has been added to kBuild.

 ifeq ($(KBUILD_HOST),win)
buildserver-documentation-affinity-hack:
	$(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename $(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip.tmp
 endif
endif # VBOX_WITH_DOCS_FROM_BUILD_SERVER


 ifdef VBOX_WITH_EFI
  #
  # Install EFI firmware image
  #
  ifdef VBOX_WITH_EFIFW_FROM_BUILD_SERVER
   #
   # Either from the build server.
   #
   INSTALLS += buildserver-efifw
   buildserver-efifw_INST = $(INST_BIN)
   buildserver-efifw_MODE = 0644
   buildserver-efifw_SOURCES = \
   	$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd=>VBoxEFI32.fd \
           $(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd=>VBoxEFI64.fd
   buildserver-efifw_CLEANS = \
   	$(buildserver-efifw_0_OUTDIR)/unpacked.ts \
   	$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd \
           $(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd \
   	$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip \
   	$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip.tmp
   ## @todo rainy day: cleanup the output directory (zip contains lots more)

   ## @todo Hack to get at TOOL_ZIP_UNPACK; see if this can be integrated somehow...
   include $(KBUILD_PATH)/tools/ZIP.kmk

   $$(buildserver-efifw_0_OUTDIR)/unpacked.ts \
   +| $$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd \
      $$(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd: \
   		$$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip
	$(call MSG_L1,Unpacking EFI firmware)
	$(QUIET)$(TOOL_ZIP_UNPACK) $(TOOL_ZIP_UNPACKFLAGS) -o $< -d $(buildserver-efifw_0_OUTDIR)
	$(APPEND) -t $@ "done"

   $$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip: \
		$(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/efi_firmware.sh | $$(dir $$@)
	$(RM) -f $@ $@.tmp
   ifneq ($(KBUILD_HOST),win)
	$(SHELL) $(PATH_DEVTOOLS)/bin/efi_firmware.sh --cmd fetch --filename $@.tmp
   else
	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-efifw-affinity-hack
   endif
	$(CP) -f $@.tmp $@
	$(RM) -f $@.tmp
## @todo kBuild: The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has been added to kBuild.

   ifeq ($(KBUILD_HOST),win)
    buildserver-efifw-affinity-hack:
	$(SHELL) $(PATH_DEVTOOLS)/bin/efi_firmware.sh --cmd fetch --filename $(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip.tmp
   endif
  else # !VBOX_WITH_EFIFW_FROM_BUILD_SERVER
   #
   # Or from the local copy
   #
   INSTALLS += local-efifw
   local-efifw_INST = $(INST_BIN)
   local-efifw_MODE = 0644
   local-efifw_SOURCES = \
   	$(PATH_ROOT)/src/VBox/Devices/EFI/FirmwareBin/VBoxEFI32.fd=>VBoxEFI32.fd \
   	$(PATH_ROOT)/src/VBox/Devices/EFI/FirmwareBin/VBoxEFI64.fd=>VBoxEFI64.fd
  endif # !VBOX_WITH_EFIFW_FROM_BUILD_SERVER
 endif # VBOX_WITH_EFI


#
# Install staged binaries on platforms where we can't cross
# compile things.
#
ifn1of ($(KBUILD_TARGET), l4 linux win)
 VBOX_PATH_STAGED ?= .

 # Additions.
 ifndef VBOX_WITH_LINUX_ADDITIONS
  ifndef VBOX_WITH_WIN32_ADDITIONS
   ifneq ($(wildcard $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso),)
    INSTALLS += staged-additions
    staged-additions_INST = $(INST_ADDITIONS_ISO)
    staged-additions_MODE = 0644
    staged-additions_SOURCES = $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso
   endif
  endif
 endif

 # guesttool.exe
 ifndef VBOX_WITH_WIN32_ADDITIONS
  ifneq ($(wildcard $(VBOX_PATH_STAGED)/guesttool.exe),)
   INSTALLS += staged-guesttool
   staged-guesttool_INST = $(INST_BIN)
   staged-guesttool_SOURCES = $(VBOX_PATH_STAGED)/guesttool.exe
  endif
 endif

endif

endif # !VBOX_ONLY_ADDITIONS && !VBOX_ONLY_TESTSUITE && !VBOX_ONLY_DOCS


ifdef VBOX_ONLY_DOCS
# It may sound a bit odd, but for preparing the documentation package the
# doxygen documentation isn't needed and increases the build time a lot.
docs:
else  # !VBOX_ONLY_DOCS
#
# Generate documentation.
# (This should be converted into a separate pass or merged with an existing one later.)
#
 ifdef VBOX_SINGLE_MAKEFILE
  ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
docs: docs.Core
  endif
 else  # !VBOX_SINGLE_MAKEFILE
docs: $(if $(VBOX_WITH_ALL_DOXYGEN_TARGETS),docs.Core)
	$(KMK) -C src/VBox/Main    docs.Main
  ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
	$(KMK) -C src/VBox/Runtime docs.iprt
  endif
 endif # !VBOX_SINGLE_MAKEFILE
endif # !VBOX_ONLY_DOCS

docs.Core docs.core: $(PATH_TARGET)/docs.Core



#
# The core (VMM+REM+Devices+Main) documentation.
#
# This includes so much because we wish to have the complete CFGM
# and GCFGM lists.
#
OTHER_CLEAN += \
	$(PATH_TARGET)/Doxyfile.Core \
	$(PATH_TARGET)/Doxyfile.Core.dep

VBOX_CORE_DOXYFILE_INPUT_DIRS = \
	include/iprt \
	include/iprt/cpp \
	include/iprt/linux \
	include/VBox \
	include/VBox/com \
	include/VBox/HostServices \
	include/VBox/GuestHost \
	include/VBox/HGSMI \
	src/VBox/VMM \
	src/VBox/VMM/VMMR0 \
	src/VBox/VMM/VMMGC \
	src/VBox/VMM/VMMAll \
	src/VBox/VMM/PATM \
	src/VBox/VMM/PATM/VMMR0 \
	src/VBox/VMM/PATM/VMMGC \
	src/VBox/VMM/PATM/VMMAll \
	src/VBox/VMM/VMMSwitcher \
	src/VBox/Debugger \
	src/VBox/Devices \
	src/VBox/Devices/Audio \
	src/VBox/Devices/Bus \
	src/VBox/Devices/Graphics \
	src/VBox/Devices/Graphics/BIOS \
	src/VBox/Devices/Input \
	src/VBox/Devices/Networking \
	src/VBox/Devices/PC \
	src/VBox/Devices/PC/BIOS \
	src/VBox/Devices/Parallel \
	src/VBox/Devices/Serial \
	src/VBox/Devices/Storage \
	src/VBox/Devices/VBoxHDDFormats \
	src/VBox/Devices/VBoxHDDFormats/StorageCraft \
	src/VBox/Devices/USB \
	src/VBox/Devices/USB/darwin \
	src/VBox/Devices/USB/linux \
	src/VBox/Devices/USB/os2 \
	src/VBox/Devices/USB/solaris \
	src/VBox/Devices/USB/vrdp \
	src/VBox/Devices/USB/win32 \
	src/VBox/Devices/VMMDev \
	src/VBox/Main/include \
	src/VBox/Main/include/hgcm \
	src/VBox/Main \
	src/VBox/Main/glue \
	src/VBox/Main/hgcm \
	src/VBox/Main/webservice \
	src/VBox/Main/xml \
	src/VBox/Main/darwin \
	src/VBox/Main/linux \
	src/VBox/Main/os2 \
	src/VBox/Main/solaris \
	src/VBox/Main/win \
	src/VBox/Main/xpcom \
	src/VBox/HostServices \
	src/VBox/HostServices/SharedClipboard \
	src/VBox/HostServices/SharedFolders \
	src/VBox/HostServices/SharedInfoServices \
	src/VBox/HostServices/SharedOpenGL \
	src/VBox/HostDrivers/Support \
	src/VBox/HostDrivers/Support/darwin \
	src/VBox/HostDrivers/Support/freebsd \
	src/VBox/HostDrivers/Support/l4 \
	src/VBox/HostDrivers/Support/linux \
	src/VBox/HostDrivers/Support/os2 \
	src/VBox/HostDrivers/Support/solaris \
	src/VBox/HostDrivers/Support/win \
	src/VBox/HostDrivers/VBoxNetFlt \
	src/VBox/HostDrivers/VBoxNetFlt/darwin \
	src/VBox/HostDrivers/VBoxNetFlt/linux \
	src/VBox/HostDrivers/VBoxNetFlt/solaris \
	src/VBox/HostDrivers/VBoxNetFlt/win \
	src/VBox/HostDrivers/VBoxNetNat \
	src/VBox/HostDrivers/VBoxNetNat/darwin \
	src/VBox/HostDrivers/VBoxNetNat/linux \
	src/VBox/HostDrivers/VBoxNetNat/solaris \
	src/VBox/HostDrivers/VBoxNetNat/win \
	src/VBox/HostDrivers/VBoxNetAdp \
	src/VBox/HostDrivers/VBoxNetAdp/darwin \
	src/VBox/HostDrivers/VBoxNetAdp/linux \
	src/VBox/HostDrivers/VBoxNetAdp/solaris \
	src/VBox/HostDrivers/VBoxNetAdp/win \
	src/VBox/HostDrivers/VBoxUSB \
	src/VBox/HostDrivers/VBoxUSB/darwin \
	src/VBox/HostDrivers/VBoxUSB/os2 \
	src/VBox/HostDrivers/VBoxUSB/solaris \
	src/VBox/HostDrivers/VBoxUSB/win \
	src/VBox/HostDrivers/VBoxUSB/win/Device \
	src/VBox/HostDrivers/VBoxUSB/win/Device/amd64 \
	src/VBox/HostDrivers/VBoxUSB/win/Device/x86 \
	src/VBox/HostDrivers/VBoxUSB/win/Filter \
	src/VBox/HostDrivers/VBoxUSB/win/Install \
	src/VBox/HostDrivers/VBoxUSB/win/Monitor \
	src/VBox/HostDrivers/VBoxUSB/win/Monitor/win32 \
	src/VBox/HostDrivers/VBoxUSB/win/Monitor/win64 \
	src/VBox/HostDrivers/VBoxUSB/win/usbd \

# These must come first in order to make things look nice.
VBOX_CORE_DOXYFILE_INPUT_FIRST =\
	$(PATH_ROOT)/doc/VBox-doc.c \
	$(PATH_ROOT)/doc/VBox-CodingGuidelines.cpp \
	$(PATH_ROOT)/doc/VBox-MakefileGuidelines.cpp \
	$(PATH_ROOT)/src/VBox/VMM/VMMCodingGuidelines.cpp \
	$(PATH_ROOT)/src/VBox/VMM/VMMDocsRawMode.cpp \
	$(PATH_ROOT)/include/VBox/cdefs.h \
	$(PATH_ROOT)/include/VBox/vmapi.h \
	$(PATH_ROOT)/include/VBox/vmm.h \
	$(PATH_ROOT)/include/VBox/cpum.h \
	$(PATH_ROOT)/include/VBox/mm.h \
	$(PATH_ROOT)/include/VBox/pgm.h \
	$(PATH_ROOT)/include/VBox/selm.h \
	$(PATH_ROOT)/include/VBox/trpm.h \
	$(PATH_ROOT)/include/VBox/patm.h \
	$(PATH_ROOT)/include/VBox/dbgf.h \
	$(PATH_ROOT)/include/VBox/stam.h \
	$(PATH_ROOT)/include/VBox/em.h \
	$(PATH_ROOT)/include/VBox/pdm.h \
	$(PATH_ROOT)/include/VBox/rem.h \
	$(PATH_ROOT)/include/VBox/iom.h \
	$(PATH_ROOT)/include/VBox/cfgm.h \
	$(PATH_ROOT)/include/VBox/tm.h \
	$(PATH_ROOT)/include/VBox/csam.h \
	$(PATH_ROOT)/include/VBox/ssm.h \
	$(PATH_ROOT)/include/VBox/hwaccm.h \
	$(PATH_ROOT)/include/VBox/hwacc_svm.h \
	$(PATH_ROOT)/include/VBox/hwacc_vmx.h \
	\
	$(PATH_ROOT)/src/VBox/VMM/CFGMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/CPUMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/DBGFInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/EMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/HWACCMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/IOMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/MMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/PDMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/PGMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/PATM/CSAMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/PATM/PATMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/REMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/SELMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/SSMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/STAMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/TMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/TRPMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/VMInternal.h \
	$(PATH_ROOT)/src/VBox/VMM/VMMInternal.h \
	\
	$(PATH_ROOT)/include/VBox/vm.h \
	\
	$(PATH_ROOT)/include/VBox/sup.h \
	$(PATH_ROOT)/include/VBox/VBoxHDD.h \
	$(PATH_ROOT)/include/VBox/types.h \
	$(PATH_ROOT)/include/VBox/err.h \
	$(PATH_ROOT)/include/VBox/x86.h \
	$(PATH_ROOT)/include/VBox/cpumdis.h \
	$(PATH_ROOT)/include/VBox/dbggui.h \
	$(PATH_ROOT)/include/VBox/dis.h \
	$(PATH_ROOT)/include/VBox/disopcode.h \
	$(PATH_ROOT)/include/VBox/intnet.h \
	$(PATH_ROOT)/include/VBox/settings.h \
	$(PATH_ROOT)/include/VBox/pci.h \
	$(PATH_ROOT)/include/VBox/scsi.h \
	$(PATH_ROOT)/include/VBox/shflsvc.h \
	$(PATH_ROOT)/include/VBox/hgcmsvc.h \
	$(PATH_ROOT)/include/VBox/usb.h \
	$(PATH_ROOT)/include/VBox/vusb.h \
	\
	$(PATH_ROOT)/include/VBox/log.h \
	$(PATH_ROOT)/include/VBox/param.h \
	$(PATH_ROOT)/include/VBox/version.h

VBOX_CORE_DOXYFILE_INPUT := \
	$(filter-out %.cpp.h, $(sort $(wildcard $(addsuffix /*.h, $(VBOX_CORE_DOXYFILE_INPUT_DIRS)))) ) \
	$(foreach dir, $(VBOX_CORE_DOXYFILE_INPUT_DIRS), $(wildcard $(dir)/*.cpp $(dir)/*.c $(dir)/.asm))
VBOX_CORE_DOXYFILE_INPUT := \
	$(VBOX_CORE_DOXYFILE_INPUT_FIRST) \
	$(filter-out $(VBOX_CORE_DOXYFILE_INPUT_FIRST), $(VBOX_CORE_DOXYFILE_INPUT))

# And some some additional stuff.
VBOX_CORE_DOXYFILE_INPUT += \
	$(PATH_ROOT)/src/recompiler/VBoxRecompiler.c \
	$(PATH_ROOT)/src/recompiler/VBoxREMWrapper.cpp


VBOX_CORE_DOXYFILE_OUTPUT = $(PATH_OUT)/docs/Core
BLDDIRS += $(VBOX_CORE_DOXYFILE_OUTPUT)

-include $(PATH_TARGET)/Doxyfile.Core.dep

# Generate the Doxyfile
$(PATH_TARGET)/Doxyfile.Core: Doxyfile.Core \
		$(comp-vars VBOX_CORE_DOXYFILE_INPUT,DOXYGEN_INPUT_PREV,FORCE) \
		$(comp-vars VBOX_CORE_DOXYFILE_OUTPUT,DOXYGEN_OUTPUT_PREV,FORCE) \
		| $$(dir $$@)
	$(RM) -f $@ $@.tmp $(PATH_TARGET)/Doxyfile.Core.dep
	$(CP) -f Doxyfile.Core $@.tmp
	$(APPEND) $@.tmp
	$(APPEND) $@.tmp "OUTPUT_DIRECTORY = $(VBOX_CORE_DOXYFILE_OUTPUT)"
	$(APPEND) $@.tmp "WARN_LOGFILE = $(VBOX_CORE_DOXYFILE_OUTPUT)/errors"
	$(APPEND) $@.tmp "INCLUDE_PATH = $(PATH_ROOT)/include $(PATH_ROOT)/src/VBox/VMM $(PATH_ROOT)/src/VBox/Main/include "
	$(APPEND) $@.tmp "INCLUDE_FILE_PATTERNS = *.cpp.h"
	$(APPEND) $@.tmp
	$(APPEND) $@.tmp "INPUT = $(VBOX_CORE_DOXYFILE_INPUT)"
	$(APPEND) $@.tmp
	$(APPEND) $@.tmp "PREDEFINED += $(DEFS) $(DEFS.$(KBUILD_TARGET)) $(DEFS.$(KBUILD_TARGET_ARCH)) $(ARCH_BITS_DEFS)"
	$(APPEND) $@.tmp "PREDEFINED += ARCH_BITS=HC_ARCH_BITS R3_ARCH_BITS=HC_ARCH_BITS R0_ARCH_BITS=HC_ARCH_BITS "
	$(APPEND) $@.tmp
	$(MV) -f $@.tmp $@
	@$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_OUTPUT_PREV = $(VBOX_CORE_DOXYFILE_OUTPUT)"
	@$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_INPUT_PREV = $(VBOX_CORE_DOXYFILE_INPUT)"

# Do the actual job.
$(PATH_TARGET)/docs.Core: $(PATH_TARGET)/Doxyfile.Core $$(VBOX_CORE_DOXYFILE_INPUT) | $(VBOX_CORE_DOXYFILE_OUTPUT)/
	$(RM) -f $(PATH_TARGET)/docs.Core
	$(RM) -Rf $(VBOX_CORE_DOXYFILE_OUTPUT)/html/
	doxygen $(PATH_TARGET)/Doxyfile.Core
	$(APPEND) $(PATH_TARGET)/docs.Core


#
# Alias for kmk_time.  Used by both the additions and testsuite build setups.
#
VBOX_KMK_TIME = $(KBUILD_BIN_PATH)/kmk_time


#
# Build the additions, all of them.
#
# This is currently tailored (hardcoded) for the additions
# build box. Can make it pretty and configurable later.
#
# The fetching must be done in serial fashion, while the building
# should be more flexible wrt to -jN.
#
additions-fetch:
	+ $(KMK) -C tools fetch VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=linux   BUILD_TARGET_ARCH=amd64 BUILD_TARGET=linux    VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=linux   BUILD_TARGET_ARCH=x86   BUILD_TARGET=linux    VBOX_ONLY_ADDITIONS=1
#	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=os2     BUILD_TARGET_ARCH=x86   BUILD_TARGET=os2	     VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=amd64 BUILD_TARGET=solaris  VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=solaris BUILD_TARGET_ARCH=x86   BUILD_TARGET=solaris  VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=win     BUILD_TARGET_ARCH=amd64 BUILD_TARGET=win	     VBOX_ONLY_ADDITIONS=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=win     BUILD_TARGET_ARCH=x86   BUILD_TARGET=win	     VBOX_ONLY_ADDITIONS=1


## @todo Currently combined solaris additions building assumes that amd64 is
# built first. The windows amd64 additions need some x86 files, so don't change
# the order of the windows builds. TODO: Split building and packing for these two VMs.
additions-build: \
	additions-build-solaris.amd64 \
	additions-build-solaris.x86 \
	additions-build-win.x86 \
	additions-build-win.amd64 \
	additions-build-os2.x86 \
	additions-build-linux.amd64 \
	additions-build-linux.x86

VBOX_ADDITIONS_BUILD.amd64 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
	KBUILD_TARGET_ARCH=amd64 BUILD_TARGET_ARCH=amd64 \
	VBOX_SVN_REV=$(VBOX_SVN_REV)

VBOX_ADDITIONS_BUILD.x86 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
	KBUILD_TARGET_ARCH=x86 BUILD_TARGET_ARCH=x86 \
	VBOX_SVN_REV=$(VBOX_SVN_REV)

# Automatically determine the additions build subdir name. Used for figuring
# out directory names inside the additions building VMs.
VBOX_ADDITIONS_BUILD_SUBDIRNAME := $(lastword $(subst /, ,$(PATH_ROOT)))

# When building in parallel on a Windows host, make sure we finish the host
# bit before kicking off any UNIX guest or we'll run into file sharing issues.
ifeq ($(KBUILD_TARGET),win)
VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST = additions-build-win.x86 additions-build-win.amd64
else
VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST =
endif

# ASSUMES the 32-bit edition has been built already. Also for serializing VM access.
additions-build-win.amd64: additions-build-win.x86
ifeq ($(KBUILD_TARGET),win)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing
else
	$(call MSG_L1,Building Windows/amd64 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.5 " echo $@ && cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing "
endif

additions-build-win.x86:
ifeq ($(KBUILD_TARGET),win)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
else
	$(call MSG_L1,Building Windows/x86 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.5 " echo $@ && cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.x86) all packing"
endif

# ASSUMES the 64-bit edition are built first. This also serializes VM access.
ifeq ($(KBUILD_TARGET),solaris)
additions-build-solaris.amd64:
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing

additions-build-solaris.x86: additions-build-solaris.amd64
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 packing

else
additions-build-solaris.rsync-into-vm: $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
	$(VBOX_KMK_TIME) rsync -a --delete --delete-excluded --exclude .svn --exclude FetchDir --exclude tinderclient.log --exclude win.amd64 --exclude win.x86 . 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)

additions-build-solaris.build-it: additions-build-solaris.rsync-into-vm
	$(call MSG_L1,Building Solaris/amd64 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " echo $@/amd64 && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing"
	$(call MSG_L1,Building Solaris/x86 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " echo $@/x86   && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) all packing VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1"

additions-build-solaris.rsync-out-of-vm: additions-build-solaris.build-it
	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.x86 out/
	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.amd64 out/

.NOTPARALLEL: additions-build-solaris.rsync-out-of-vm additions-build-solaris.rsync-into-vm
.PHONY:       additions-build-solaris.rsync-out-of-vm additions-build-solaris.rsync-into-vm additions-build-solaris.build-it

additions-build-solaris.amd64: additions-build-solaris.rsync-out-of-vm
additions-build-solaris.x86: additions-build-solaris.rsync-out-of-vm
endif

additions-build-os2.x86:
#ifeq ($(KBUILD_TARGET),os2)
#	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
#	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
#else
#	$(VBOX_KMK_TIME) ssh vbox@192.168.27.3 " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) "
#endif

additions-build-linux.amd64:   $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.amd64)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing
else
	$(call MSG_L1,Building Linux/amd64 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.12 " echo $@ && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing"
endif

additions-build-linux.x86:   $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.x86)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
else
	$(call MSG_L1,Building Linux/x86 additions)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.2 " echo $@ && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) all packing"
endif


additions-packing:
	+ $(KMK) VBOX_ONLY_ADDITIONS=1 \
		VBOX_WITH_ADDITIONS_ISO.freebsd.amd64= \
		VBOX_WITH_ADDITIONS_ISO.freebsd.x86= \
		VBOX_WITH_ADDITIONS_ISO.linux.amd64=1 \
		VBOX_WITH_ADDITIONS_ISO.linux.x86=1 \
		VBOX_WITH_ADDITIONS_ISO.solaris.amd64=1 \
		VBOX_WITH_ADDITIONS_ISO.solaris.x86=1 \
		VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 \
		VBOX_WITH_ADDITIONS_ISO.win.amd64=1 \
		VBOX_WITH_ADDITIONS_ISO.win.x86=1 \
		-C src/VBox/Additions \
		$(VBOX_PATH_ADDITIONS)/VBoxGuestAdditions.iso

.PHONY: \
	additions-build-win.x86 \
	additions-build-win.amd64 \
	additions-build-solaris.amd64 \
	additions-build-solaris.x86 \
	additions-build-os2.x86 \
	additions-build-linux.amd64 \
	additions-build-linux.x86 \
	additions-packing


#
# Build the test suite, all of it.
#
# This is currently tailored (hardcoded) for the additions build box just like
# the additions build above, which it in fact is a copy of.
#
testsuite-fetch:
	+ $(KMK) -C tools fetch VBOX_ONLY_TESTSUITE=1
#	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=darwin  BUILD_TARGET_ARCH=amd64 BUILD_TARGET=darwin    VBOX_ONLY_TESTSUITE=1
#	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=darwin  BUILD_TARGET_ARCH=x86   BUILD_TARGET=darwin    VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=linux   BUILD_TARGET_ARCH=amd64 BUILD_TARGET=linux     VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=linux   BUILD_TARGET_ARCH=x86   BUILD_TARGET=linux     VBOX_ONLY_TESTSUITE=1
#	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=os2     BUILD_TARGET_ARCH=x86   BUILD_TARGET=os2       VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=amd64 BUILD_TARGET=solaris   VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=solaris BUILD_TARGET_ARCH=x86   BUILD_TARGET=solaris   VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=win     BUILD_TARGET_ARCH=amd64 BUILD_TARGET=win       VBOX_ONLY_TESTSUITE=1
	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86   KBUILD_TARGET=win     BUILD_TARGET_ARCH=x86   BUILD_TARGET=win       VBOX_ONLY_TESTSUITE=1


testsuite-build: \
	testsuite-build-solaris.amd64 \
	testsuite-build-solaris.x86 \
	testsuite-build-win.x86 \
	testsuite-build-win.amd64 \
	testsuite-build-os2.x86 \
	testsuite-build-linux.amd64 \
	testsuite-build-linux.x86

VBOX_TESTSUITE_BUILD.amd64 = VBOX_ONLY_TESTSUITE=1 \
	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
	KBUILD_TARGET_ARCH=amd64 BUILD_TARGET_ARCH=amd64 \
	VBOX_SVN_REV=$(VBOX_SVN_REV)

VBOX_TESTSUITE_BUILD.x86 = VBOX_ONLY_TESTSUITE=1 \
	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
	KBUILD_TARGET_ARCH=x86 BUILD_TARGET_ARCH=x86 \
	VBOX_SVN_REV=$(VBOX_SVN_REV)

# Automatically determine the testsuite build subdir name. Used for figuring
# out directory names inside the test suite building VMs.
VBOX_TESTSUITE_BUILD_SUBDIRNAME := $(lastword $(subst /, ,$(PATH_ROOT)))

# When building in parallel on a Windows host, make sure we finish the host
# bit before kicking off any UNIX guest or we'll run into file sharing issues.
ifeq ($(KBUILD_TARGET),win)
VBOX_TESTSUITE_BUILD_WIN_HOST_FIRST = testsuite-build-win.x86 testsuite-build-win.amd64
else
VBOX_TESTSUITE_BUILD_WIN_HOST_FIRST =
endif

# ASSUMES the 32-bit edition has been built already. Also for serializing VM access.
testsuite-build-win.amd64: testsuite-build-win.x86
ifeq ($(KBUILD_TARGET),win)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.amd64) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)
else
	$(call MSG_L1,Building Windows/amd64 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.5 " echo $@ && cd e:/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_TESTSUITE_BUILD.amd64) all "
endif

testsuite-build-win.x86:
ifeq ($(KBUILD_TARGET),win)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.x86) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)
else
	$(call MSG_L1,Building Windows/x86 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.5 " echo $@ && cd e:/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_TESTSUITE_BUILD.x86) all"
endif

ifeq ($(KBUILD_TARGET),solaris)
testsuite-build-solaris.amd64:
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.amd64) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)

testsuite-build-solaris.x86:
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.x86)   all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)

else
testsuite-build-solaris.rsync-into-vm: $(VBOX_TESTSUITE_BUILD_WIN_HOST_FIRST)
	$(VBOX_KMK_TIME) rsync -a --delete --delete-excluded --exclude .svn --exclude FetchDir --exclude tinderclient.log --exclude win.amd64 --exclude win.x86 . 192.168.27.4:/mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME)

testsuite-build-solaris.build-it: testsuite-build-solaris.rsync-into-vm
	$(call MSG_L1,Building Solaris/amd64 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " echo $@/amd64 && cd /mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_TESTSUITE_BUILD.amd64) all"
	$(call MSG_L1,Building Solaris/x86 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.4 " echo $@/x86   && cd /mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_TESTSUITE_BUILD.x86) all "

testsuite-build-solaris.rsync-out-of-vm: testsuite-build-solaris.build-it
	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME)/out/solaris.x86   out/
	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME)/out/solaris.amd64 out/

.NOTPARALLEL: testsuite-build-solaris.rsync-out-of-vm testsuite-build-solaris.rsync-into-vm
.PHONY:       testsuite-build-solaris.rsync-out-of-vm testsuite-build-solaris.rsync-into-vm testsuite-build-solaris.build-it

testsuite-build-solaris.amd64: testsuite-build-solaris.rsync-out-of-vm
testsuite-build-solaris.x86:   testsuite-build-solaris.rsync-out-of-vm
endif

testsuite-build-os2.x86:
#ifeq ($(KBUILD_TARGET),os2)
#	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.x86) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)
#else
#	$(VBOX_KMK_TIME) ssh vbox@192.168.27.3 " cd /mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_TESTSUITE_BUILD.x86) "
#endif

testsuite-build-linux.amd64:   $(VBOX_TESTSUITE_BUILD_WIN_HOST_FIRST)
ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.amd64)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.amd64) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)
else
	$(call MSG_L1,Building Linux/amd64 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.12 " echo $@ && cd /mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_TESTSUITE_BUILD.amd64) all"
endif

testsuite-build-linux.x86:   $(VBOX_TESTSUITE_BUILD_WIN_HOST_FIRST)
ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.x86)
	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_TESTSUITE_BUILD.x86) all $(VBOX_TESTSUITE_HOST_BUILD_TWEAK)
else
	$(call MSG_L1,Building Linux/x86 testsuite)
	$(VBOX_KMK_TIME) ssh vbox@192.168.27.2 " echo $@ && cd /mnt/tinderbox/$(VBOX_TESTSUITE_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_TESTSUITE_BUILD.x86) all"
endif


testsuite-packing:
	+ $(KMK) VBOX_ONLY_TESTSUITE=1 \
		VBOX_WITH_TESTSUITE_PACKING.darwin.amd64= \
		VBOX_WITH_TESTSUITE_PACKING.darwin.x86= \
		VBOX_WITH_TESTSUITE_PACKING.freebsd.amd64= \
		VBOX_WITH_TESTSUITE_PACKING.freebsd.x86= \
		VBOX_WITH_TESTSUITE_PACKING.linux.amd64=1 \
		VBOX_WITH_TESTSUITE_PACKING.linux.x86=1 \
		VBOX_WITH_TESTSUITE_PACKING.os2.x86= \
		VBOX_WITH_TESTSUITE_PACKING.solaris.amd64=1 \
		VBOX_WITH_TESTSUITE_PACKING.solaris.x86=1 \
		VBOX_WITH_TESTSUITE_PACKING.win.amd64=1 \
		VBOX_WITH_TESTSUITE_PACKING.win.x86=1 \
		-C src/tests/testsuite \
		$(PATH_OUT)/VBoxTestSuite.zip

.PHONY: \
	testsuite-build-win.x86 \
	testsuite-build-win.amd64 \
	testsuite-build-solaris.amd64 \
	testsuite-build-solaris.x86 \
	testsuite-build-os2.x86 \
	testsuite-build-linux.amd64 \
	testsuite-build-linux.x86 \
	testsuite-packing


#
# Build the EFI firmware, all of it.
#
# Mainly hooks right now, maybe we need them later.
#
efi-fetch:

efi-build: $(VBOX_VERSION_HEADER)
	$(PATH_ROOT)/webtools/tinderbox/client/efi-build.sh

efi-packing:

#
# Generate VirtualBox-OSE-x.x.x.tar.bz2 (OSE) tarballs for distribution
# - includes kBuild
# - must be executed on an OSE checkout
#

# the path where to store the tarball
TARBALLPATH ?= $(abspath $(PATH_ROOT)/..)
# the root directory inside the tarball
TARBALLROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
# the name of the tarball file
TARBALLNAME ?= VirtualBox-$(VBOX_VERSION_STRING).tar.bz2
snapshot-ose:
	@$(call MSG_L1,Creating tarball $(TARBALLPATH)/$(TARBALLNAME))
	@if [ -r "$(PATH_ROOT)/src/VBox/Devices/USB/USBProxyDevice.cpp" ]; then \
	    echo; \
	    echo "Found USB stuff, refused to build OSE tarball!"; \
	    echo; \
	    exit 1; \
	fi; \
	if [ -z "$(VBOX_OSE)" ]; then \
	    echo; \
	    echo "Please do 'kmk snapshot-ose VBOX_OSE=1'"; \
	    echo; \
	    exit 1; \
	fi
	$(QUIET)$(MKDIR) -p $(TARBALLPATH)
	$(QUIET)$(RM) -f $(TARBALLPATH)/$(TARBALLROOT)
	$(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(TARBALLPATH)/$(TARBALLROOT)
	$(QUIET)tar -cjh --owner 0 --group 0 --totals \
	    --exclude=.svn \
	    --exclude=$(TARBALLROOT)/out \
	    --exclude=$(TARBALLROOT)/env.sh \
	    --exclude=$(TARBALLROOT)/configure.log \
	    --exclude=$(TARBALLROOT)/build.log \
	    --exclude=$(TARBALLROOT)/AutoConfig.kmk \
	    --exclude=$(TARBALLROOT)/LocalConfig.kmk \
	    --exclude=$(TARBALLROOT)/prebuild \
	    -C $(TARBALLPATH) \
	    -f $(TARBALLPATH)/$(TARBALLNAME) \
	    $(TARBALLROOT)
	$(QUIET)$(RM) $(TARBALLPATH)/$(TARBALLROOT)


#
# Generate VirtualBox-x.x.x.tar.bz2 (PUEL) zip archives for internal use only
# - includes kBuild
# - must be executed on an PUEL checkout
#

# the path where to store the zip archive
ZIPPATH ?= $(abspath $(PATH_ROOT)/..)
# the root directory inside the zip archive
ZIPROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
# the name of the zip archive
ZIPNAME ?= VirtualBox-$(VBOX_VERSION_STRING).zip
snapshot-puel:
	@$(call MSG_L1,Creating zip $(ZIPPATH)/$(ZIPNAME))
	@if [ ! -r "$(PATH_ROOT)/src/VBox/Devices/USB/USBProxyDevice.cpp" ]; then \
	    echo; \
	    echo "Did not find USB stuff, is this an OSE branch?"; \
	    echo; \
	    exit 1; \
	 fi
	@if [ -z "$(PASSWORD)" ]; then \
	    echo; \
	    echo "Please specify a password with PASSWORD=..."; \
	    echo; \
	    exit 1; \
	 fi
	$(QUIET)$(MKDIR) -p $(ZIPPATH)
	$(QUIET)$(RM) -f $(ZIPPATH)/$(ZIPROOT)
	$(QUIET)$(RM) -f $(ZIPPATH)/$(ZIPNAME)
	$(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(ZIPPATH)/$(ZIPROOT)
	$(QUIET)(cd $(ZIPPATH); 7z a \
	    -l -tzip -mmt=on -mx=7 -p$(PASSWORD) \
	    -xr!.svn \
	    -i!$(ZIPROOT)/Config.kmk \
	    -i!$(ZIPROOT)/Doxyfile.Core \
	    -i!$(ZIPROOT)/Makefile.kmk \
	    -i!$(ZIPROOT)/configure \
	    -i!$(ZIPROOT)/configure.vbs \
	    -i!$(ZIPROOT)/doc \
	    -i!$(ZIPROOT)/include \
	    -i!$(ZIPROOT)/kBuild \
	    -i!$(ZIPROOT)/src \
	    -i!$(ZIPROOT)/tools/env.sh \
	    -i!$(ZIPROOT)/tools/linux.x86/bin/* \
	    -i!$(ZIPROOT)/tools/linux.amd64/bin/* \
	    -x!$(ZIPROOT)/doc/Devices \
	    -x!$(ZIPROOT)/doc/\*pdf \
	    -x!$(ZIPROOT)/doc/L4VM \
	    -x!$(ZIPROOT)/doc/VMM \
	    -x!$(ZIPROOT)/doc/licenses_old \
	    -x!$(ZIPROOT)/doc/manual/de_DE \
	    -x!$(ZIPROOT)/doc/manual/fr_FR \
	    -x!$(ZIPROOT)/src/tests \
	    -x!$(ZIPROOT)/src/VBox/Artwork/2008-\* \
	    -x!$(ZIPROOT)/src/VBox/Installer/AMI \
	    -x!$(ZIPROOT)/src/VBox/Installer/Avanquest \
	    -x!$(ZIPROOT)/src/VBox/Installer/Encore \
	    -x!$(ZIPROOT)/src/VBox/Installer/linux/debian \
	    -x!$(ZIPROOT)/src/VBox/Installer/linux/rpm \
	    $(ZIPPATH)/$(ZIPNAME))
	$(QUIET)$(RM) $(ZIPPATH)/$(ZIPROOT)


#
# Generate ALL the rules.
#
include $(KBUILD_PATH)/subfooter.kmk


#
# Generate x86.mac and err.mac.
#
incs:
	$(SED) -f include/VBox/err.sed     --output include/VBox/err.mac   include/VBox/err.h
	$(APPEND) include/VBox/err.mac '%include "iprt/err.mac"'
	$(SED) -f include/VBox/err.sed     --output include/iprt/err.mac   include/iprt/err.h
	$(SED) -f include/VBox/various.sed --output include/VBox/x86.mac   include/VBox/x86.h
	$(SED) -f include/VBox/various.sed --output include/VBox/param.mac include/VBox/param.h


#
# Generate Visual SlickEdit tagging #defines.
#
vslick.h: include/VBox/cdefs.h include/iprt/cdefs.h $(MAKEFILE)
	$(RM) -f -- $@ $@.tmp $@.tmp2 $@.tmp3
	$(APPEND) $@.tmp '// autogenerated'
	@$(APPEND) $@.tmp '#define IN_SLICKEDIT '
	@$(APPEND) $@.tmp '#define RT_C_DECLS_BEGIN '
	@$(APPEND) $@.tmp '#define RT_C_DECLS_END '
	@$(APPEND) $@.tmp '#define RT_NO_THROW '
	@$(APPEND) $@.tmp '#define RT_THROW(type) throw(type)'

	@$(APPEND) $@.tmp '#define ATL_NO_VTABLE '
	@$(APPEND) $@.tmp '#define BEGIN_COM_MAP(a) '
	@$(APPEND) $@.tmp '#define COM_INTERFACE_ENTRY(a) '
	@$(APPEND) $@.tmp '#define COM_INTERFACE_ENTRY2(a,b) '
	@$(APPEND) $@.tmp '#define COM_INTERFACE_ENTRY3(a,b,c) '
	@$(APPEND) $@.tmp '#define COM_INTERFACE_ENTRY4(a,b,c,d) '
	@$(APPEND) $@.tmp '#define END_COM_MAP(a) '

	@$(APPEND) $@.tmp '#define COM_DECL_READONLY_ENUM_AND_COLLECTION(a) '
	@$(APPEND) $@.tmp '#define COMGETTER(n)                    n '
	@$(APPEND) $@.tmp '#define COMSETTER(n)                    n '
	@$(APPEND) $@.tmp '#define ComSafeArrayIn(t,a)             t a[] '
	@$(APPEND) $@.tmp '#define ComSafeArrayOut(t,a)            t * a[] '
	@$(APPEND) $@.tmp '#define DECLARE_CLASSFACTORY(a) '
	@$(APPEND) $@.tmp '#define DECLARE_CLASSFACTORY_SINGLETON(a) '
	@$(APPEND) $@.tmp '#define DECLARE_REGISTRY_RESOURCEID(a) '
	@$(APPEND) $@.tmp '#define DECLARE_NOT_AGGREGATABLE(a) '
	@$(APPEND) $@.tmp '#define DECLARE_PROTECT_FINAL_CONSTRUCT(a) '
	@$(APPEND) $@.tmp '#define DECLARE_EMPTY_CTOR_DTOR(a)      a(); ~a();'
	@$(APPEND) $@.tmp '#define DEFINE_EMPTY_CTOR_DTOR(a)       a::a() {}   a::~a() {}'
	@$(APPEND) $@.tmp '#define NS_DECL_ISUPPORTS '
	@$(APPEND) $@.tmp '#define NS_IMETHOD                      virtual nsresult '
	@$(APPEND) $@.tmp '#define NS_IMETHOD_(type)               virtual type '
	@$(APPEND) $@.tmp '#define NS_IMETHODIMP                   nsresult '
	@$(APPEND) $@.tmp '#define NS_IMETHODIMP_(type)            type '
	@$(APPEND) $@.tmp '#define PARSERS_EXPORT '
if1of ($(KBUILD_HOST),win)
	@$(APPEND) $@.tmp '#define STDMETHOD(m)                    virtual HRESULT m '
	@$(APPEND) $@.tmp '#define STDMETHOD_(type,m)              virtual type m '
	@$(APPEND) $@.tmp '#define STDMETHODIMP                    HRESULT '
	@$(APPEND) $@.tmp '#define STDMETHODIMP_(type)             type '
else
	@$(APPEND) $@.tmp '#define STDMETHOD(m)                    virtual nsresult m '
	@$(APPEND) $@.tmp '#define STDMETHOD_(type,m)              virtual type m '
	@$(APPEND) $@.tmp '#define STDMETHODIMP                    nsresult '
	@$(APPEND) $@.tmp '#define STDMETHODIMP_(type)             type '
endif
	@$(APPEND) $@.tmp '#define VBOX_SCRIPTABLE(a)              public a '
	@$(APPEND) $@.tmp '#define VBOX_SCRIPTABLE_IMPL(a) '
	@$(APPEND) $@.tmp '#define VIRTUALBOXBASE_ADD_ERRORINFO_SUPPORT(a) '

	@$(APPEND) $@.tmp '#define CTX_SUFF(var)                   var##R3 '
	@$(APPEND) $@.tmp '#define CTXAllSUFF(var)                 var##R3 '
	@$(APPEND) $@.tmp '#define CTXSUFF(var)                    var##HC '
	@$(APPEND) $@.tmp '#define OTHERCTXSUFF(var)  	           var##GC '
	@$(APPEND) $@.tmp '#define CTXALLMID(first, last)          first##R3##last '
	@$(APPEND) $@.tmp '#define CTXMID(first, last)             first##HC##last '
	@$(APPEND) $@.tmp '#define OTHERCTXMID(first, last)        first##GC##last '
	@$(APPEND) $@.tmp '#define CTXTYPE(GCType, R3Type, R0Type) R3Type '
	@$(APPEND) $@.tmp '#define RCTYPE(RCType, HCType)          RCType '
	@$(APPEND) $@.tmp '#define GCTYPE(GCType, HCType)          GCType '
	@$(APPEND) $@.tmp '#define RCPTRTYPE(RCType)               RCType '
	@$(APPEND) $@.tmp '#define GCPTRTYPE(GCType)               GCType '
	@$(APPEND) $@.tmp '#define HCPTRTYPE(HCType)               HCType '
	@$(APPEND) $@.tmp '#define R3R0PTRTYPE(HCType)             HCType '
	@$(APPEND) $@.tmp '#define R0PTRTYPE(R3Type)               R3Type '
	@$(APPEND) $@.tmp '#define R3PTRTYPE(R0Type)               R0Type '
	@$(APPEND) $@.tmp '#define RT_SRC_POS                      __FILE__, __LINE__, __PRETTY_FUNCTION__ '
	@$(APPEND) $@.tmp '#define RT_SRC_POS_DECL                 const char *pszFile, unsigned iLine, const char *pszFunction '
	@$(APPEND) $@.tmp '#define RT_SRC_POS_ARGS                 pszFile, iLine, pszFunction '
	@$(APPEND) $@.tmp '#define RTCALL'
	@$(APPEND) $@.tmp '#define DECLINLINE(type)                inline type '
	@$(APPEND) $@.tmp '#define DECL_FORCE_INLINE(type)         inline type '
	@$(APPEND) $@.tmp '#define DECL_INVALID(type)              type '

	@$(APPEND) $@.tmp '#define PDMDEVINSINT_DECLARED           1'
	@$(APPEND) $@.tmp '#define VBOX_WITH_HGCM                  1'
	@$(APPEND) $@.tmp '#define VBOXCALL'

	@$(APPEND) $@.tmp '#define PGM_CTX(a,b)                    b'
	@$(APPEND) $@.tmp '#define PGM_CTX3(a,b,c)                 c'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME(name)              PGM_GST_NAME_AMD64(name)'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME_REAL(name)         PGM_CTX3(name)'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME_PROT(name)         PGM_CTX3(pgm,GstProt,name)'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME_32BIT(name)        PGM_CTX3(pgm,Gst32Bit,name)'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME_PAE(name)          PGM_CTX3(pgm,GstPAE,name)'
	@$(APPEND) $@.tmp '#define PGM_GST_NAME_AMD64(name)        PGM_CTX3(pgm,GstAMD64,name)'
	@$(APPEND) $@.tmp '#define PGM_GST_DECL(type, name)        type PGM_GST_NAME(name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME(name)              PGM_GST_NAME_AMD64(name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME_32BIT(name)        PGM_CTX3(pgm,Shw32Bit,name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME_PAE(name)          PGM_CTX3(pgm,ShwPAE,name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME_AMD64(name)        PGM_CTX3(pgm,ShwAMD64,name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME_NESTED(name)       PGM_CTX3(pgm,ShwNested,name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_NAME_EPT(name)          PGM_CTX3(pgm,ShwEPT,name)'
	@$(APPEND) $@.tmp '#define PGM_SHW_DECL(type, name)        type PGM_SHW_NAME(name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME(name)              PGM_BTH_NAME_NESTED_AMD64(name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_32BIT_REAL(name)   PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_32BIT_PROT(name)   PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_32BIT_32BIT(name)  PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_PAE_REAL(name)     PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_PAE_PROT(name)     PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_PAE_32BIT(name)    PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_PAE_PAE(name)      PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_AMD64_PROT(name)   PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_AMD64_AMD64(name)  PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_NESTED_REAL(name)  PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_NESTED_PROT(name)  PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_NESTED_32BIT(name) PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_NESTED_PAE(name)   PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_NESTED_AMD64(name) PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_EPT_REAL(name)     PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_EPT_PROT(name)     PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_EPT_32BIT(name)    PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_EPT_PAE(name)      PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_NAME_EPT_AMD64(name)    PGM_CTX3(pgm,Bth,name)'
	@$(APPEND) $@.tmp '#define PGM_BTH_DECL(type, name)        type PGM_BTH_NAME(name)'

	$(SED)  -e '/__cdecl/d' \
		-e '/^ *# *define.*DECL/!d' \
		-e '/DECLS/d' \
		-e '/DECLARE_CLS_/d' \
		-e '/_SRC_POS_DECL/d' \
		-e '/declspec/d' \
		-e '/__attribute__/d' \
		-e 's/#  */#/g' \
		-e 's/   */ /g' \
		-e '/(type) DECLEXPORT/d' \
		-e '/ DECLEXPORT_CLASS/d' \
		-e 's/ *VBOXCALL//' \
		-e 's/ *RTCALL//' \
		-e 's/(type) DECLIMPORT(type)/(type) type/' \
		-e '/ DECLASM(type) type/d' \
		-e '/define  *DECL..CALLBACKMEMBER(type[^)]*) *RT/d' \
		-e '/define  *DECLINLINE(type)/d' \
		-e '/define  *DECL_FORCE_INLINE(type)/d' \
		-e '/  *DECL_INVALID(/d' \
		-e '/define RT[DATGRC03]*DECL(type) *DECLHIDDEN(type)/d' \
		\
		--append $@.tmp \
		$(filter-out include/VBox/err.h, $(wildcard include/VBox/*.h)) \
		include/iprt/cdefs.h
	$(CAT_EXT) $@.tmp \
		| $(SED_EXT) -e 's/_/\x1F/g' -e 's/(/\x1E/g' -e 's/[[:space:]][[:space:]]*/\x1C/g' \
		| sort $(if-expr "$(KBUILD_TARGET)" == "win",,-f) \
		| $(SED_EXT) -e 's/\x1F/_/g' -e 's/\x1E/(/g' -e 's/\x1C/ /g' \
		| $(SED_EXT) -e 's/$$/\n/' --output $@.tmp2
	$(MV) -f $@.tmp2 $@
	$(RM) -f $@.tmp $@.tmp2 $@.tmp3
ifeq ($(KBUILD_HOST),win)
	@$(ECHO) 'TODO: Merge vslick.h with your "$(HOMEDRIVE)$(HOMEPATH)\Documents\My SlickEdit Config\x.y.z\usercpp.h" file.'
else ifeq ($(KBUILD_HOST),darwin)
	@$(ECHO) "TODO: Merge ./vslick.h with your ~/Library/Application\ Support/SlickEdit/x.y.z/unxcpp.h file."
else
	@$(ECHO) "TODO: Merge ./vslick.h with your ~/.slickedit/x.y.z/unxcpp.h file."
endif


#
# Add fetching of the tools to the 'up[date][2]' targets.
#
up update up2 update2::
ifndef VBOX_OSE
	+$(MAKE) -C tools fetch
else
	$(MAKE) -C tools -f Makefile-ose.kmk fetch
endif



#
# Aliases for building the SDK.
#
.NOTPARALLEL: sdk sdk-fetch
sdk:
	+ $(KMK) VBOX_ONLY_SDK=1 \
		pass_bldprogs pass_others pass_installs pass_packing

sdk-fetch:
	+ $(KMK) KBUILD_TARGET=win  KBUILD_TARGET_ARCH=x86  -C tools fetch