VirtualBox

source: vbox/trunk/src/libs/openssl-3.1.0/test/helpers/handshake.c@ 100111

Last change on this file since 100111 was 99366, checked in by vboxsync, 21 months ago

openssl-3.1.0: Applied and adjusted our OpenSSL changes to 3.0.7. bugref:10418

File size: 58.8 KB
Line 
1/*
2 * Copyright 2016-2022 The OpenSSL Project Authors. All Rights Reserved.
3 *
4 * Licensed under the Apache License 2.0 (the "License"). You may not use
5 * this file except in compliance with the License. You can obtain a copy
6 * in the file LICENSE in the source distribution or at
7 * https://www.openssl.org/source/license.html
8 */
9
10#include <string.h>
11
12#include <openssl/bio.h>
13#include <openssl/x509_vfy.h>
14#include <openssl/ssl.h>
15#include <openssl/core_names.h>
16
17#include "../../ssl/ssl_local.h"
18#include "internal/sockets.h"
19#include "internal/nelem.h"
20#include "handshake.h"
21#include "../testutil.h"
22
23#if !defined(OPENSSL_NO_SCTP) && !defined(OPENSSL_NO_SOCK)
24#include <netinet/sctp.h>
25#endif
26
27HANDSHAKE_RESULT *HANDSHAKE_RESULT_new(void)
28{
29 HANDSHAKE_RESULT *ret;
30
31 TEST_ptr(ret = OPENSSL_zalloc(sizeof(*ret)));
32 return ret;
33}
34
35void HANDSHAKE_RESULT_free(HANDSHAKE_RESULT *result)
36{
37 if (result == NULL)
38 return;
39 OPENSSL_free(result->client_npn_negotiated);
40 OPENSSL_free(result->server_npn_negotiated);
41 OPENSSL_free(result->client_alpn_negotiated);
42 OPENSSL_free(result->server_alpn_negotiated);
43 OPENSSL_free(result->result_session_ticket_app_data);
44 sk_X509_NAME_pop_free(result->server_ca_names, X509_NAME_free);
45 sk_X509_NAME_pop_free(result->client_ca_names, X509_NAME_free);
46 OPENSSL_free(result->cipher);
47 OPENSSL_free(result);
48}
49
50/*
51 * Since there appears to be no way to extract the sent/received alert
52 * from the SSL object directly, we use the info callback and stash
53 * the result in ex_data.
54 */
55typedef struct handshake_ex_data_st {
56 int alert_sent;
57 int num_fatal_alerts_sent;
58 int alert_received;
59 int session_ticket_do_not_call;
60 ssl_servername_t servername;
61} HANDSHAKE_EX_DATA;
62
63/* |ctx_data| itself is stack-allocated. */
64static void ctx_data_free_data(CTX_DATA *ctx_data)
65{
66 OPENSSL_free(ctx_data->npn_protocols);
67 ctx_data->npn_protocols = NULL;
68 OPENSSL_free(ctx_data->alpn_protocols);
69 ctx_data->alpn_protocols = NULL;
70 OPENSSL_free(ctx_data->srp_user);
71 ctx_data->srp_user = NULL;
72 OPENSSL_free(ctx_data->srp_password);
73 ctx_data->srp_password = NULL;
74 OPENSSL_free(ctx_data->session_ticket_app_data);
75 ctx_data->session_ticket_app_data = NULL;
76}
77
78static int ex_data_idx;
79
80static void info_cb(const SSL *s, int where, int ret)
81{
82 if (where & SSL_CB_ALERT) {
83 HANDSHAKE_EX_DATA *ex_data =
84 (HANDSHAKE_EX_DATA*)(SSL_get_ex_data(s, ex_data_idx));
85 if (where & SSL_CB_WRITE) {
86 ex_data->alert_sent = ret;
87 if (strcmp(SSL_alert_type_string(ret), "F") == 0
88 || strcmp(SSL_alert_desc_string(ret), "CN") == 0)
89 ex_data->num_fatal_alerts_sent++;
90 } else {
91 ex_data->alert_received = ret;
92 }
93 }
94}
95
96/* Select the appropriate server CTX.
97 * Returns SSL_TLSEXT_ERR_OK if a match was found.
98 * If |ignore| is 1, returns SSL_TLSEXT_ERR_NOACK on mismatch.
99 * Otherwise, returns SSL_TLSEXT_ERR_ALERT_FATAL on mismatch.
100 * An empty SNI extension also returns SSL_TSLEXT_ERR_NOACK.
101 */
102static int select_server_ctx(SSL *s, void *arg, int ignore)
103{
104 const char *servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
105 HANDSHAKE_EX_DATA *ex_data =
106 (HANDSHAKE_EX_DATA*)(SSL_get_ex_data(s, ex_data_idx));
107
108 if (servername == NULL) {
109 ex_data->servername = SSL_TEST_SERVERNAME_SERVER1;
110 return SSL_TLSEXT_ERR_NOACK;
111 }
112
113 if (strcmp(servername, "server2") == 0) {
114 SSL_CTX *new_ctx = (SSL_CTX*)arg;
115 SSL_set_SSL_CTX(s, new_ctx);
116 /*
117 * Copy over all the SSL_CTX options - reasonable behavior
118 * allows testing of cases where the options between two
119 * contexts differ/conflict
120 */
121 SSL_clear_options(s, 0xFFFFFFFFL);
122 SSL_set_options(s, SSL_CTX_get_options(new_ctx));
123
124 ex_data->servername = SSL_TEST_SERVERNAME_SERVER2;
125 return SSL_TLSEXT_ERR_OK;
126 } else if (strcmp(servername, "server1") == 0) {
127 ex_data->servername = SSL_TEST_SERVERNAME_SERVER1;
128 return SSL_TLSEXT_ERR_OK;
129 } else if (ignore) {
130 ex_data->servername = SSL_TEST_SERVERNAME_SERVER1;
131 return SSL_TLSEXT_ERR_NOACK;
132 } else {
133 /* Don't set an explicit alert, to test library defaults. */
134 return SSL_TLSEXT_ERR_ALERT_FATAL;
135 }
136}
137
138static int client_hello_select_server_ctx(SSL *s, void *arg, int ignore)
139{
140 const char *servername;
141 const unsigned char *p;
142 size_t len, remaining;
143 HANDSHAKE_EX_DATA *ex_data =
144 (HANDSHAKE_EX_DATA*)(SSL_get_ex_data(s, ex_data_idx));
145
146 /*
147 * The server_name extension was given too much extensibility when it
148 * was written, so parsing the normal case is a bit complex.
149 */
150 if (!SSL_client_hello_get0_ext(s, TLSEXT_TYPE_server_name, &p,
151 &remaining) ||
152 remaining <= 2)
153 return 0;
154 /* Extract the length of the supplied list of names. */
155 len = (*(p++) << 8);
156 len += *(p++);
157 if (len + 2 != remaining)
158 return 0;
159 remaining = len;
160 /*
161 * The list in practice only has a single element, so we only consider
162 * the first one.
163 */
164 if (remaining == 0 || *p++ != TLSEXT_NAMETYPE_host_name)
165 return 0;
166 remaining--;
167 /* Now we can finally pull out the byte array with the actual hostname. */
168 if (remaining <= 2)
169 return 0;
170 len = (*(p++) << 8);
171 len += *(p++);
172 if (len + 2 > remaining)
173 return 0;
174 remaining = len;
175 servername = (const char *)p;
176
177 if (len == strlen("server2") && strncmp(servername, "server2", len) == 0) {
178 SSL_CTX *new_ctx = arg;
179 SSL_set_SSL_CTX(s, new_ctx);
180 /*
181 * Copy over all the SSL_CTX options - reasonable behavior
182 * allows testing of cases where the options between two
183 * contexts differ/conflict
184 */
185 SSL_clear_options(s, 0xFFFFFFFFL);
186 SSL_set_options(s, SSL_CTX_get_options(new_ctx));
187
188 ex_data->servername = SSL_TEST_SERVERNAME_SERVER2;
189 return 1;
190 } else if (len == strlen("server1") &&
191 strncmp(servername, "server1", len) == 0) {
192 ex_data->servername = SSL_TEST_SERVERNAME_SERVER1;
193 return 1;
194 } else if (ignore) {
195 ex_data->servername = SSL_TEST_SERVERNAME_SERVER1;
196 return 1;
197 }
198 return 0;
199}
200/*
201 * (RFC 6066):
202 * If the server understood the ClientHello extension but
203 * does not recognize the server name, the server SHOULD take one of two
204 * actions: either abort the handshake by sending a fatal-level
205 * unrecognized_name(112) alert or continue the handshake.
206 *
207 * This behaviour is up to the application to configure; we test both
208 * configurations to ensure the state machine propagates the result
209 * correctly.
210 */
211static int servername_ignore_cb(SSL *s, int *ad, void *arg)
212{
213 return select_server_ctx(s, arg, 1);
214}
215
216static int servername_reject_cb(SSL *s, int *ad, void *arg)
217{
218 return select_server_ctx(s, arg, 0);
219}
220
221static int client_hello_ignore_cb(SSL *s, int *al, void *arg)
222{
223 if (!client_hello_select_server_ctx(s, arg, 1)) {
224 *al = SSL_AD_UNRECOGNIZED_NAME;
225 return SSL_CLIENT_HELLO_ERROR;
226 }
227 return SSL_CLIENT_HELLO_SUCCESS;
228}
229
230static int client_hello_reject_cb(SSL *s, int *al, void *arg)
231{
232 if (!client_hello_select_server_ctx(s, arg, 0)) {
233 *al = SSL_AD_UNRECOGNIZED_NAME;
234 return SSL_CLIENT_HELLO_ERROR;
235 }
236 return SSL_CLIENT_HELLO_SUCCESS;
237}
238
239static int client_hello_nov12_cb(SSL *s, int *al, void *arg)
240{
241 int ret;
242 unsigned int v;
243 const unsigned char *p;
244
245 v = SSL_client_hello_get0_legacy_version(s);
246 if (v > TLS1_2_VERSION || v < SSL3_VERSION) {
247 *al = SSL_AD_PROTOCOL_VERSION;
248 return SSL_CLIENT_HELLO_ERROR;
249 }
250 (void)SSL_client_hello_get0_session_id(s, &p);
251 if (p == NULL ||
252 SSL_client_hello_get0_random(s, &p) == 0 ||
253 SSL_client_hello_get0_ciphers(s, &p) == 0 ||
254 SSL_client_hello_get0_compression_methods(s, &p) == 0) {
255 *al = SSL_AD_INTERNAL_ERROR;
256 return SSL_CLIENT_HELLO_ERROR;
257 }
258 ret = client_hello_select_server_ctx(s, arg, 0);
259 SSL_set_max_proto_version(s, TLS1_1_VERSION);
260 if (!ret) {
261 *al = SSL_AD_UNRECOGNIZED_NAME;
262 return SSL_CLIENT_HELLO_ERROR;
263 }
264 return SSL_CLIENT_HELLO_SUCCESS;
265}
266
267static unsigned char dummy_ocsp_resp_good_val = 0xff;
268static unsigned char dummy_ocsp_resp_bad_val = 0xfe;
269
270static int server_ocsp_cb(SSL *s, void *arg)
271{
272 unsigned char *resp;
273
274 resp = OPENSSL_malloc(1);
275 if (resp == NULL)
276 return SSL_TLSEXT_ERR_ALERT_FATAL;
277 /*
278 * For the purposes of testing we just send back a dummy OCSP response
279 */
280 *resp = *(unsigned char *)arg;
281 if (!SSL_set_tlsext_status_ocsp_resp(s, resp, 1)) {
282 OPENSSL_free(resp);
283 return SSL_TLSEXT_ERR_ALERT_FATAL;
284 }
285
286 return SSL_TLSEXT_ERR_OK;
287}
288
289static int client_ocsp_cb(SSL *s, void *arg)
290{
291 const unsigned char *resp;
292 int len;
293
294 len = SSL_get_tlsext_status_ocsp_resp(s, &resp);
295 if (len != 1 || *resp != dummy_ocsp_resp_good_val)
296 return 0;
297
298 return 1;
299}
300
301static int verify_reject_cb(X509_STORE_CTX *ctx, void *arg) {
302 X509_STORE_CTX_set_error(ctx, X509_V_ERR_APPLICATION_VERIFICATION);
303 return 0;
304}
305
306static int n_retries = 0;
307static int verify_retry_cb(X509_STORE_CTX *ctx, void *arg) {
308 int idx = SSL_get_ex_data_X509_STORE_CTX_idx();
309 SSL *ssl;
310
311 /* this should not happen but check anyway */
312 if (idx < 0
313 || (ssl = X509_STORE_CTX_get_ex_data(ctx, idx)) == NULL)
314 return 0;
315
316 if (--n_retries < 0)
317 return 1;
318
319 return SSL_set_retry_verify(ssl);
320}
321
322static int verify_accept_cb(X509_STORE_CTX *ctx, void *arg) {
323 return 1;
324}
325
326static int broken_session_ticket_cb(SSL *s, unsigned char *key_name,
327 unsigned char *iv, EVP_CIPHER_CTX *ctx,
328 EVP_MAC_CTX *hctx, int enc)
329{
330 return 0;
331}
332
333static int do_not_call_session_ticket_cb(SSL *s, unsigned char *key_name,
334 unsigned char *iv,
335 EVP_CIPHER_CTX *ctx,
336 EVP_MAC_CTX *hctx, int enc)
337{
338 HANDSHAKE_EX_DATA *ex_data =
339 (HANDSHAKE_EX_DATA*)(SSL_get_ex_data(s, ex_data_idx));
340 ex_data->session_ticket_do_not_call = 1;
341 return 0;
342}
343
344/* Parse the comma-separated list into TLS format. */
345static int parse_protos(const char *protos, unsigned char **out, size_t *outlen)
346{
347 size_t len, i, prefix;
348
349 len = strlen(protos);
350
351 /* Should never have reuse. */
352 if (!TEST_ptr_null(*out)
353 /* Test values are small, so we omit length limit checks. */
354 || !TEST_ptr(*out = OPENSSL_malloc(len + 1)))
355 return 0;
356 *outlen = len + 1;
357
358 /*
359 * foo => '3', 'f', 'o', 'o'
360 * foo,bar => '3', 'f', 'o', 'o', '3', 'b', 'a', 'r'
361 */
362 memcpy(*out + 1, protos, len);
363
364 prefix = 0;
365 i = prefix + 1;
366 while (i <= len) {
367 if ((*out)[i] == ',') {
368 if (!TEST_int_gt(i - 1, prefix))
369 goto err;
370 (*out)[prefix] = (unsigned char)(i - 1 - prefix);
371 prefix = i;
372 }
373 i++;
374 }
375 if (!TEST_int_gt(len, prefix))
376 goto err;
377 (*out)[prefix] = (unsigned char)(len - prefix);
378 return 1;
379
380err:
381 OPENSSL_free(*out);
382 *out = NULL;
383 return 0;
384}
385
386#ifndef OPENSSL_NO_NEXTPROTONEG
387/*
388 * The client SHOULD select the first protocol advertised by the server that it
389 * also supports. In the event that the client doesn't support any of server's
390 * protocols, or the server doesn't advertise any, it SHOULD select the first
391 * protocol that it supports.
392 */
393static int client_npn_cb(SSL *s, unsigned char **out, unsigned char *outlen,
394 const unsigned char *in, unsigned int inlen,
395 void *arg)
396{
397 CTX_DATA *ctx_data = (CTX_DATA*)(arg);
398 int ret;
399
400 ret = SSL_select_next_proto(out, outlen, in, inlen,
401 ctx_data->npn_protocols,
402 ctx_data->npn_protocols_len);
403 /* Accept both OPENSSL_NPN_NEGOTIATED and OPENSSL_NPN_NO_OVERLAP. */
404 return TEST_true(ret == OPENSSL_NPN_NEGOTIATED || ret == OPENSSL_NPN_NO_OVERLAP)
405 ? SSL_TLSEXT_ERR_OK : SSL_TLSEXT_ERR_ALERT_FATAL;
406}
407
408static int server_npn_cb(SSL *s, const unsigned char **data,
409 unsigned int *len, void *arg)
410{
411 CTX_DATA *ctx_data = (CTX_DATA*)(arg);
412 *data = ctx_data->npn_protocols;
413 *len = ctx_data->npn_protocols_len;
414 return SSL_TLSEXT_ERR_OK;
415}
416#endif
417
418/*
419 * The server SHOULD select the most highly preferred protocol that it supports
420 * and that is also advertised by the client. In the event that the server
421 * supports no protocols that the client advertises, then the server SHALL
422 * respond with a fatal "no_application_protocol" alert.
423 */
424static int server_alpn_cb(SSL *s, const unsigned char **out,
425 unsigned char *outlen, const unsigned char *in,
426 unsigned int inlen, void *arg)
427{
428 CTX_DATA *ctx_data = (CTX_DATA*)(arg);
429 int ret;
430
431 /* SSL_select_next_proto isn't const-correct... */
432 unsigned char *tmp_out;
433
434 /*
435 * The result points either to |in| or to |ctx_data->alpn_protocols|.
436 * The callback is allowed to point to |in| or to a long-lived buffer,
437 * so we can return directly without storing a copy.
438 */
439 ret = SSL_select_next_proto(&tmp_out, outlen,
440 ctx_data->alpn_protocols,
441 ctx_data->alpn_protocols_len, in, inlen);
442
443 *out = tmp_out;
444 /* Unlike NPN, we don't tolerate a mismatch. */
445 return ret == OPENSSL_NPN_NEGOTIATED ? SSL_TLSEXT_ERR_OK
446 : SSL_TLSEXT_ERR_ALERT_FATAL;
447}
448
449static int generate_session_ticket_cb(SSL *s, void *arg)
450{
451 CTX_DATA *server_ctx_data = arg;
452 SSL_SESSION *ss = SSL_get_session(s);
453 char *app_data = server_ctx_data->session_ticket_app_data;
454
455 if (ss == NULL || app_data == NULL)
456 return 0;
457
458 return SSL_SESSION_set1_ticket_appdata(ss, app_data, strlen(app_data));
459}
460
461static int decrypt_session_ticket_cb(SSL *s, SSL_SESSION *ss,
462 const unsigned char *keyname,
463 size_t keyname_len,
464 SSL_TICKET_STATUS status,
465 void *arg)
466{
467 switch (status) {
468 case SSL_TICKET_EMPTY:
469 case SSL_TICKET_NO_DECRYPT:
470 return SSL_TICKET_RETURN_IGNORE_RENEW;
471 case SSL_TICKET_SUCCESS:
472 return SSL_TICKET_RETURN_USE;
473 case SSL_TICKET_SUCCESS_RENEW:
474 return SSL_TICKET_RETURN_USE_RENEW;
475 default:
476 break;
477 }
478 return SSL_TICKET_RETURN_ABORT;
479}
480
481/*
482 * Configure callbacks and other properties that can't be set directly
483 * in the server/client CONF.
484 */
485static int configure_handshake_ctx(SSL_CTX *server_ctx, SSL_CTX *server2_ctx,
486 SSL_CTX *client_ctx,
487 const SSL_TEST_CTX *test,
488 const SSL_TEST_EXTRA_CONF *extra,
489 CTX_DATA *server_ctx_data,
490 CTX_DATA *server2_ctx_data,
491 CTX_DATA *client_ctx_data)
492{
493 unsigned char *ticket_keys;
494 size_t ticket_key_len;
495
496 if (!TEST_int_eq(SSL_CTX_set_max_send_fragment(server_ctx,
497 test->max_fragment_size), 1))
498 goto err;
499 if (server2_ctx != NULL) {
500 if (!TEST_int_eq(SSL_CTX_set_max_send_fragment(server2_ctx,
501 test->max_fragment_size),
502 1))
503 goto err;
504 }
505 if (!TEST_int_eq(SSL_CTX_set_max_send_fragment(client_ctx,
506 test->max_fragment_size), 1))
507 goto err;
508
509 switch (extra->client.verify_callback) {
510 case SSL_TEST_VERIFY_ACCEPT_ALL:
511 SSL_CTX_set_cert_verify_callback(client_ctx, &verify_accept_cb, NULL);
512 break;
513 case SSL_TEST_VERIFY_RETRY_ONCE:
514 n_retries = 1;
515 SSL_CTX_set_cert_verify_callback(client_ctx, &verify_retry_cb, NULL);
516 break;
517 case SSL_TEST_VERIFY_REJECT_ALL:
518 SSL_CTX_set_cert_verify_callback(client_ctx, &verify_reject_cb, NULL);
519 break;
520 case SSL_TEST_VERIFY_NONE:
521 break;
522 }
523
524 switch (extra->client.max_fragment_len_mode) {
525 case TLSEXT_max_fragment_length_512:
526 case TLSEXT_max_fragment_length_1024:
527 case TLSEXT_max_fragment_length_2048:
528 case TLSEXT_max_fragment_length_4096:
529 case TLSEXT_max_fragment_length_DISABLED:
530 SSL_CTX_set_tlsext_max_fragment_length(
531 client_ctx, extra->client.max_fragment_len_mode);
532 break;
533 }
534
535 /*
536 * Link the two contexts for SNI purposes.
537 * Also do ClientHello callbacks here, as setting both ClientHello and SNI
538 * is bad.
539 */
540 switch (extra->server.servername_callback) {
541 case SSL_TEST_SERVERNAME_IGNORE_MISMATCH:
542 SSL_CTX_set_tlsext_servername_callback(server_ctx, servername_ignore_cb);
543 SSL_CTX_set_tlsext_servername_arg(server_ctx, server2_ctx);
544 break;
545 case SSL_TEST_SERVERNAME_REJECT_MISMATCH:
546 SSL_CTX_set_tlsext_servername_callback(server_ctx, servername_reject_cb);
547 SSL_CTX_set_tlsext_servername_arg(server_ctx, server2_ctx);
548 break;
549 case SSL_TEST_SERVERNAME_CB_NONE:
550 break;
551 case SSL_TEST_SERVERNAME_CLIENT_HELLO_IGNORE_MISMATCH:
552 SSL_CTX_set_client_hello_cb(server_ctx, client_hello_ignore_cb, server2_ctx);
553 break;
554 case SSL_TEST_SERVERNAME_CLIENT_HELLO_REJECT_MISMATCH:
555 SSL_CTX_set_client_hello_cb(server_ctx, client_hello_reject_cb, server2_ctx);
556 break;
557 case SSL_TEST_SERVERNAME_CLIENT_HELLO_NO_V12:
558 SSL_CTX_set_client_hello_cb(server_ctx, client_hello_nov12_cb, server2_ctx);
559 }
560
561 if (extra->server.cert_status != SSL_TEST_CERT_STATUS_NONE) {
562 SSL_CTX_set_tlsext_status_type(client_ctx, TLSEXT_STATUSTYPE_ocsp);
563 SSL_CTX_set_tlsext_status_cb(client_ctx, client_ocsp_cb);
564 SSL_CTX_set_tlsext_status_arg(client_ctx, NULL);
565 SSL_CTX_set_tlsext_status_cb(server_ctx, server_ocsp_cb);
566 SSL_CTX_set_tlsext_status_arg(server_ctx,
567 ((extra->server.cert_status == SSL_TEST_CERT_STATUS_GOOD_RESPONSE)
568 ? &dummy_ocsp_resp_good_val : &dummy_ocsp_resp_bad_val));
569 }
570
571 /*
572 * The initial_ctx/session_ctx always handles the encrypt/decrypt of the
573 * session ticket. This ticket_key callback is assigned to the second
574 * session (assigned via SNI), and should never be invoked
575 */
576 if (server2_ctx != NULL)
577 SSL_CTX_set_tlsext_ticket_key_evp_cb(server2_ctx,
578 do_not_call_session_ticket_cb);
579
580 if (extra->server.broken_session_ticket) {
581 SSL_CTX_set_tlsext_ticket_key_evp_cb(server_ctx,
582 broken_session_ticket_cb);
583 }
584#ifndef OPENSSL_NO_NEXTPROTONEG
585 if (extra->server.npn_protocols != NULL) {
586 if (!TEST_true(parse_protos(extra->server.npn_protocols,
587 &server_ctx_data->npn_protocols,
588 &server_ctx_data->npn_protocols_len)))
589 goto err;
590 SSL_CTX_set_npn_advertised_cb(server_ctx, server_npn_cb,
591 server_ctx_data);
592 }
593 if (extra->server2.npn_protocols != NULL) {
594 if (!TEST_true(parse_protos(extra->server2.npn_protocols,
595 &server2_ctx_data->npn_protocols,
596 &server2_ctx_data->npn_protocols_len))
597 || !TEST_ptr(server2_ctx))
598 goto err;
599 SSL_CTX_set_npn_advertised_cb(server2_ctx, server_npn_cb,
600 server2_ctx_data);
601 }
602 if (extra->client.npn_protocols != NULL) {
603 if (!TEST_true(parse_protos(extra->client.npn_protocols,
604 &client_ctx_data->npn_protocols,
605 &client_ctx_data->npn_protocols_len)))
606 goto err;
607 SSL_CTX_set_next_proto_select_cb(client_ctx, client_npn_cb,
608 client_ctx_data);
609 }
610#endif
611 if (extra->server.alpn_protocols != NULL) {
612 if (!TEST_true(parse_protos(extra->server.alpn_protocols,
613 &server_ctx_data->alpn_protocols,
614 &server_ctx_data->alpn_protocols_len)))
615 goto err;
616 SSL_CTX_set_alpn_select_cb(server_ctx, server_alpn_cb, server_ctx_data);
617 }
618 if (extra->server2.alpn_protocols != NULL) {
619 if (!TEST_ptr(server2_ctx)
620 || !TEST_true(parse_protos(extra->server2.alpn_protocols,
621 &server2_ctx_data->alpn_protocols,
622 &server2_ctx_data->alpn_protocols_len
623 )))
624 goto err;
625 SSL_CTX_set_alpn_select_cb(server2_ctx, server_alpn_cb,
626 server2_ctx_data);
627 }
628 if (extra->client.alpn_protocols != NULL) {
629 unsigned char *alpn_protos = NULL;
630 size_t alpn_protos_len = 0;
631
632 if (!TEST_true(parse_protos(extra->client.alpn_protocols,
633 &alpn_protos, &alpn_protos_len))
634 /* Reversed return value convention... */
635 || !TEST_int_eq(SSL_CTX_set_alpn_protos(client_ctx, alpn_protos,
636 alpn_protos_len), 0))
637 goto err;
638 OPENSSL_free(alpn_protos);
639 }
640
641 if (extra->server.session_ticket_app_data != NULL) {
642 server_ctx_data->session_ticket_app_data =
643 OPENSSL_strdup(extra->server.session_ticket_app_data);
644 if (!TEST_ptr(server_ctx_data->session_ticket_app_data))
645 goto err;
646 SSL_CTX_set_session_ticket_cb(server_ctx, generate_session_ticket_cb,
647 decrypt_session_ticket_cb, server_ctx_data);
648 }
649 if (extra->server2.session_ticket_app_data != NULL) {
650 if (!TEST_ptr(server2_ctx))
651 goto err;
652 server2_ctx_data->session_ticket_app_data =
653 OPENSSL_strdup(extra->server2.session_ticket_app_data);
654 if (!TEST_ptr(server2_ctx_data->session_ticket_app_data))
655 goto err;
656 SSL_CTX_set_session_ticket_cb(server2_ctx, NULL,
657 decrypt_session_ticket_cb, server2_ctx_data);
658 }
659
660 /*
661 * Use fixed session ticket keys so that we can decrypt a ticket created with
662 * one CTX in another CTX. Don't address server2 for the moment.
663 */
664 ticket_key_len = SSL_CTX_set_tlsext_ticket_keys(server_ctx, NULL, 0);
665 if (!TEST_ptr(ticket_keys = OPENSSL_zalloc(ticket_key_len))
666 || !TEST_int_eq(SSL_CTX_set_tlsext_ticket_keys(server_ctx,
667 ticket_keys,
668 ticket_key_len), 1)) {
669 OPENSSL_free(ticket_keys);
670 goto err;
671 }
672 OPENSSL_free(ticket_keys);
673
674 /* The default log list includes EC keys, so CT can't work without EC. */
675#if !defined(OPENSSL_NO_CT) && !defined(OPENSSL_NO_EC)
676 if (!TEST_true(SSL_CTX_set_default_ctlog_list_file(client_ctx)))
677 goto err;
678 switch (extra->client.ct_validation) {
679 case SSL_TEST_CT_VALIDATION_PERMISSIVE:
680 if (!TEST_true(SSL_CTX_enable_ct(client_ctx,
681 SSL_CT_VALIDATION_PERMISSIVE)))
682 goto err;
683 break;
684 case SSL_TEST_CT_VALIDATION_STRICT:
685 if (!TEST_true(SSL_CTX_enable_ct(client_ctx, SSL_CT_VALIDATION_STRICT)))
686 goto err;
687 break;
688 case SSL_TEST_CT_VALIDATION_NONE:
689 break;
690 }
691#endif
692#ifndef OPENSSL_NO_SRP
693 if (!configure_handshake_ctx_for_srp(server_ctx, server2_ctx, client_ctx,
694 extra, server_ctx_data,
695 server2_ctx_data, client_ctx_data))
696 goto err;
697#endif /* !OPENSSL_NO_SRP */
698 return 1;
699err:
700 return 0;
701}
702
703/* Configure per-SSL callbacks and other properties. */
704static void configure_handshake_ssl(SSL *server, SSL *client,
705 const SSL_TEST_EXTRA_CONF *extra)
706{
707 if (extra->client.servername != SSL_TEST_SERVERNAME_NONE)
708 SSL_set_tlsext_host_name(client,
709 ssl_servername_name(extra->client.servername));
710 if (extra->client.enable_pha)
711 SSL_set_post_handshake_auth(client, 1);
712}
713
714/* The status for each connection phase. */
715typedef enum {
716 PEER_SUCCESS,
717 PEER_RETRY,
718 PEER_ERROR,
719 PEER_WAITING,
720 PEER_TEST_FAILURE
721} peer_status_t;
722
723/* An SSL object and associated read-write buffers. */
724typedef struct peer_st {
725 SSL *ssl;
726 /* Buffer lengths are int to match the SSL read/write API. */
727 unsigned char *write_buf;
728 int write_buf_len;
729 unsigned char *read_buf;
730 int read_buf_len;
731 int bytes_to_write;
732 int bytes_to_read;
733 peer_status_t status;
734} PEER;
735
736static int create_peer(PEER *peer, SSL_CTX *ctx)
737{
738 static const int peer_buffer_size = 64 * 1024;
739 SSL *ssl = NULL;
740 unsigned char *read_buf = NULL, *write_buf = NULL;
741
742 if (!TEST_ptr(ssl = SSL_new(ctx))
743 || !TEST_ptr(write_buf = OPENSSL_zalloc(peer_buffer_size))
744 || !TEST_ptr(read_buf = OPENSSL_zalloc(peer_buffer_size)))
745 goto err;
746
747 peer->ssl = ssl;
748 peer->write_buf = write_buf;
749 peer->read_buf = read_buf;
750 peer->write_buf_len = peer->read_buf_len = peer_buffer_size;
751 return 1;
752err:
753 SSL_free(ssl);
754 OPENSSL_free(write_buf);
755 OPENSSL_free(read_buf);
756 return 0;
757}
758
759static void peer_free_data(PEER *peer)
760{
761 SSL_free(peer->ssl);
762 OPENSSL_free(peer->write_buf);
763 OPENSSL_free(peer->read_buf);
764}
765
766/*
767 * Note that we could do the handshake transparently under an SSL_write,
768 * but separating the steps is more helpful for debugging test failures.
769 */
770static void do_handshake_step(PEER *peer)
771{
772 if (!TEST_int_eq(peer->status, PEER_RETRY)) {
773 peer->status = PEER_TEST_FAILURE;
774 } else {
775 int ret = SSL_do_handshake(peer->ssl);
776
777 if (ret == 1) {
778 peer->status = PEER_SUCCESS;
779 } else if (ret == 0) {
780 peer->status = PEER_ERROR;
781 } else {
782 int error = SSL_get_error(peer->ssl, ret);
783
784 /* Memory bios should never block with SSL_ERROR_WANT_WRITE. */
785 if (error != SSL_ERROR_WANT_READ
786 && error != SSL_ERROR_WANT_RETRY_VERIFY)
787 peer->status = PEER_ERROR;
788 }
789 }
790}
791
792/*-
793 * Send/receive some application data. The read-write sequence is
794 * Peer A: (R) W - first read will yield no data
795 * Peer B: R W
796 * ...
797 * Peer A: R W
798 * Peer B: R W
799 * Peer A: R
800 */
801static void do_app_data_step(PEER *peer)
802{
803 int ret = 1, write_bytes;
804
805 if (!TEST_int_eq(peer->status, PEER_RETRY)) {
806 peer->status = PEER_TEST_FAILURE;
807 return;
808 }
809
810 /* We read everything available... */
811 while (ret > 0 && peer->bytes_to_read) {
812 ret = SSL_read(peer->ssl, peer->read_buf, peer->read_buf_len);
813 if (ret > 0) {
814 if (!TEST_int_le(ret, peer->bytes_to_read)) {
815 peer->status = PEER_TEST_FAILURE;
816 return;
817 }
818 peer->bytes_to_read -= ret;
819 } else if (ret == 0) {
820 peer->status = PEER_ERROR;
821 return;
822 } else {
823 int error = SSL_get_error(peer->ssl, ret);
824 if (error != SSL_ERROR_WANT_READ) {
825 peer->status = PEER_ERROR;
826 return;
827 } /* Else continue with write. */
828 }
829 }
830
831 /* ... but we only write one write-buffer-full of data. */
832 write_bytes = peer->bytes_to_write < peer->write_buf_len ? peer->bytes_to_write :
833 peer->write_buf_len;
834 if (write_bytes) {
835 ret = SSL_write(peer->ssl, peer->write_buf, write_bytes);
836 if (ret > 0) {
837 /* SSL_write will only succeed with a complete write. */
838 if (!TEST_int_eq(ret, write_bytes)) {
839 peer->status = PEER_TEST_FAILURE;
840 return;
841 }
842 peer->bytes_to_write -= ret;
843 } else {
844 /*
845 * We should perhaps check for SSL_ERROR_WANT_READ/WRITE here
846 * but this doesn't yet occur with current app data sizes.
847 */
848 peer->status = PEER_ERROR;
849 return;
850 }
851 }
852
853 /*
854 * We could simply finish when there was nothing to read, and we have
855 * nothing left to write. But keeping track of the expected number of bytes
856 * to read gives us somewhat better guarantees that all data sent is in fact
857 * received.
858 */
859 if (peer->bytes_to_write == 0 && peer->bytes_to_read == 0) {
860 peer->status = PEER_SUCCESS;
861 }
862}
863
864static void do_reneg_setup_step(const SSL_TEST_CTX *test_ctx, PEER *peer)
865{
866 int ret;
867 char buf;
868
869 if (peer->status == PEER_SUCCESS) {
870 /*
871 * We are a client that succeeded this step previously, but the server
872 * wanted to retry. Probably there is a no_renegotiation warning alert
873 * waiting for us. Attempt to continue the handshake.
874 */
875 peer->status = PEER_RETRY;
876 do_handshake_step(peer);
877 return;
878 }
879
880 if (!TEST_int_eq(peer->status, PEER_RETRY)
881 || !TEST_true(test_ctx->handshake_mode
882 == SSL_TEST_HANDSHAKE_RENEG_SERVER
883 || test_ctx->handshake_mode
884 == SSL_TEST_HANDSHAKE_RENEG_CLIENT
885 || test_ctx->handshake_mode
886 == SSL_TEST_HANDSHAKE_KEY_UPDATE_SERVER
887 || test_ctx->handshake_mode
888 == SSL_TEST_HANDSHAKE_KEY_UPDATE_CLIENT
889 || test_ctx->handshake_mode
890 == SSL_TEST_HANDSHAKE_POST_HANDSHAKE_AUTH)) {
891 peer->status = PEER_TEST_FAILURE;
892 return;
893 }
894
895 /* Reset the count of the amount of app data we need to read/write */
896 peer->bytes_to_write = peer->bytes_to_read = test_ctx->app_data_size;
897
898 /* Check if we are the peer that is going to initiate */
899 if ((test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_SERVER
900 && SSL_is_server(peer->ssl))
901 || (test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_RENEG_CLIENT
902 && !SSL_is_server(peer->ssl))) {
903 /*
904 * If we already asked for a renegotiation then fall through to the
905 * SSL_read() below.
906 */
907 if (!SSL_renegotiate_pending(peer->ssl)) {
908 /*
909 * If we are the client we will always attempt to resume the
910 * session. The server may or may not resume dependent on the
911 * setting of SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
912 */
913 if (SSL_is_server(peer->ssl)) {
914 ret = SSL_renegotiate(peer->ssl);
915 } else {
916 int full_reneg = 0;
917
918 if (test_ctx->extra.client.no_extms_on_reneg) {
919 SSL_set_options(peer->ssl, SSL_OP_NO_EXTENDED_MASTER_SECRET);
920 full_reneg = 1;
921 }
922 if (test_ctx->extra.client.reneg_ciphers != NULL) {
923 if (!SSL_set_cipher_list(peer->ssl,
924 test_ctx->extra.client.reneg_ciphers)) {
925 peer->status = PEER_ERROR;
926 return;
927 }
928 full_reneg = 1;
929 }
930 if (full_reneg)
931 ret = SSL_renegotiate(peer->ssl);
932 else
933 ret = SSL_renegotiate_abbreviated(peer->ssl);
934 }
935 if (!ret) {
936 peer->status = PEER_ERROR;
937 return;
938 }
939 do_handshake_step(peer);
940 /*
941 * If status is PEER_RETRY it means we're waiting on the peer to
942 * continue the handshake. As far as setting up the renegotiation is
943 * concerned that is a success. The next step will continue the
944 * handshake to its conclusion.
945 *
946 * If status is PEER_SUCCESS then we are the server and we have
947 * successfully sent the HelloRequest. We need to continue to wait
948 * until the handshake arrives from the client.
949 */
950 if (peer->status == PEER_RETRY)
951 peer->status = PEER_SUCCESS;
952 else if (peer->status == PEER_SUCCESS)
953 peer->status = PEER_RETRY;
954 return;
955 }
956 } else if (test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_KEY_UPDATE_SERVER
957 || test_ctx->handshake_mode
958 == SSL_TEST_HANDSHAKE_KEY_UPDATE_CLIENT) {
959 if (SSL_is_server(peer->ssl)
960 != (test_ctx->handshake_mode
961 == SSL_TEST_HANDSHAKE_KEY_UPDATE_SERVER)) {
962 peer->status = PEER_SUCCESS;
963 return;
964 }
965
966 ret = SSL_key_update(peer->ssl, test_ctx->key_update_type);
967 if (!ret) {
968 peer->status = PEER_ERROR;
969 return;
970 }
971 do_handshake_step(peer);
972 /*
973 * This is a one step handshake. We shouldn't get anything other than
974 * PEER_SUCCESS
975 */
976 if (peer->status != PEER_SUCCESS)
977 peer->status = PEER_ERROR;
978 return;
979 } else if (test_ctx->handshake_mode == SSL_TEST_HANDSHAKE_POST_HANDSHAKE_AUTH) {
980 if (SSL_is_server(peer->ssl)) {
981 /* Make the server believe it's received the extension */
982 if (test_ctx->extra.server.force_pha)
983 peer->ssl->post_handshake_auth = SSL_PHA_EXT_RECEIVED;
984 ret = SSL_verify_client_post_handshake(peer->ssl);
985 if (!ret) {
986 peer->status = PEER_ERROR;
987 return;
988 }
989 }
990 do_handshake_step(peer);
991 /*
992 * This is a one step handshake. We shouldn't get anything other than
993 * PEER_SUCCESS
994 */
995 if (peer->status != PEER_SUCCESS)
996 peer->status = PEER_ERROR;
997 return;
998 }
999
1000 /*
1001 * The SSL object is still expecting app data, even though it's going to
1002 * get a handshake message. We try to read, and it should fail - after which
1003 * we should be in a handshake
1004 */
1005 ret = SSL_read(peer->ssl, &buf, sizeof(buf));
1006 if (ret >= 0) {
1007 /*
1008 * We're not actually expecting data - we're expecting a reneg to
1009 * start
1010 */
1011 peer->status = PEER_ERROR;
1012 return;
1013 } else {
1014 int error = SSL_get_error(peer->ssl, ret);
1015 if (error != SSL_ERROR_WANT_READ) {
1016 peer->status = PEER_ERROR;
1017 return;
1018 }
1019 /* If we're not in init yet then we're not done with setup yet */
1020 if (!SSL_in_init(peer->ssl))
1021 return;
1022 }
1023
1024 peer->status = PEER_SUCCESS;
1025}
1026
1027
1028/*
1029 * RFC 5246 says:
1030 *
1031 * Note that as of TLS 1.1,
1032 * failure to properly close a connection no longer requires that a
1033 * session not be resumed. This is a change from TLS 1.0 to conform
1034 * with widespread implementation practice.
1035 *
1036 * However,
1037 * (a) OpenSSL requires that a connection be shutdown for all protocol versions.
1038 * (b) We test lower versions, too.
1039 * So we just implement shutdown. We do a full bidirectional shutdown so that we
1040 * can compare sent and received close_notify alerts and get some test coverage
1041 * for SSL_shutdown as a bonus.
1042 */
1043static void do_shutdown_step(PEER *peer)
1044{
1045 int ret;
1046
1047 if (!TEST_int_eq(peer->status, PEER_RETRY)) {
1048 peer->status = PEER_TEST_FAILURE;
1049 return;
1050 }
1051 ret = SSL_shutdown(peer->ssl);
1052
1053 if (ret == 1) {
1054 peer->status = PEER_SUCCESS;
1055 } else if (ret < 0) { /* On 0, we retry. */
1056 int error = SSL_get_error(peer->ssl, ret);
1057
1058 if (error != SSL_ERROR_WANT_READ && error != SSL_ERROR_WANT_WRITE)
1059 peer->status = PEER_ERROR;
1060 }
1061}
1062
1063typedef enum {
1064 HANDSHAKE,
1065 RENEG_APPLICATION_DATA,
1066 RENEG_SETUP,
1067 RENEG_HANDSHAKE,
1068 APPLICATION_DATA,
1069 SHUTDOWN,
1070 CONNECTION_DONE
1071} connect_phase_t;
1072
1073
1074static int renegotiate_op(const SSL_TEST_CTX *test_ctx)
1075{
1076 switch (test_ctx->handshake_mode) {
1077 case SSL_TEST_HANDSHAKE_RENEG_SERVER:
1078 case SSL_TEST_HANDSHAKE_RENEG_CLIENT:
1079 return 1;
1080 default:
1081 return 0;
1082 }
1083}
1084static int post_handshake_op(const SSL_TEST_CTX *test_ctx)
1085{
1086 switch (test_ctx->handshake_mode) {
1087 case SSL_TEST_HANDSHAKE_KEY_UPDATE_CLIENT:
1088 case SSL_TEST_HANDSHAKE_KEY_UPDATE_SERVER:
1089 case SSL_TEST_HANDSHAKE_POST_HANDSHAKE_AUTH:
1090 return 1;
1091 default:
1092 return 0;
1093 }
1094}
1095
1096static connect_phase_t next_phase(const SSL_TEST_CTX *test_ctx,
1097 connect_phase_t phase)
1098{
1099 switch (phase) {
1100 case HANDSHAKE:
1101 if (renegotiate_op(test_ctx) || post_handshake_op(test_ctx))
1102 return RENEG_APPLICATION_DATA;
1103 return APPLICATION_DATA;
1104 case RENEG_APPLICATION_DATA:
1105 return RENEG_SETUP;
1106 case RENEG_SETUP:
1107 if (post_handshake_op(test_ctx))
1108 return APPLICATION_DATA;
1109 return RENEG_HANDSHAKE;
1110 case RENEG_HANDSHAKE:
1111 return APPLICATION_DATA;
1112 case APPLICATION_DATA:
1113 return SHUTDOWN;
1114 case SHUTDOWN:
1115 return CONNECTION_DONE;
1116 case CONNECTION_DONE:
1117 TEST_error("Trying to progress after connection done");
1118 break;
1119 }
1120 return -1;
1121}
1122
1123static void do_connect_step(const SSL_TEST_CTX *test_ctx, PEER *peer,
1124 connect_phase_t phase)
1125{
1126 switch (phase) {
1127 case HANDSHAKE:
1128 do_handshake_step(peer);
1129 break;
1130 case RENEG_APPLICATION_DATA:
1131 do_app_data_step(peer);
1132 break;
1133 case RENEG_SETUP:
1134 do_reneg_setup_step(test_ctx, peer);
1135 break;
1136 case RENEG_HANDSHAKE:
1137 do_handshake_step(peer);
1138 break;
1139 case APPLICATION_DATA:
1140 do_app_data_step(peer);
1141 break;
1142 case SHUTDOWN:
1143 do_shutdown_step(peer);
1144 break;
1145 case CONNECTION_DONE:
1146 TEST_error("Action after connection done");
1147 break;
1148 }
1149}
1150
1151typedef enum {
1152 /* Both parties succeeded. */
1153 HANDSHAKE_SUCCESS,
1154 /* Client errored. */
1155 CLIENT_ERROR,
1156 /* Server errored. */
1157 SERVER_ERROR,
1158 /* Peers are in inconsistent state. */
1159 INTERNAL_ERROR,
1160 /* One or both peers not done. */
1161 HANDSHAKE_RETRY
1162} handshake_status_t;
1163
1164/*
1165 * Determine the handshake outcome.
1166 * last_status: the status of the peer to have acted last.
1167 * previous_status: the status of the peer that didn't act last.
1168 * client_spoke_last: 1 if the client went last.
1169 */
1170static handshake_status_t handshake_status(peer_status_t last_status,
1171 peer_status_t previous_status,
1172 int client_spoke_last)
1173{
1174 switch (last_status) {
1175 case PEER_TEST_FAILURE:
1176 return INTERNAL_ERROR;
1177
1178 case PEER_WAITING:
1179 /* Shouldn't ever happen */
1180 return INTERNAL_ERROR;
1181
1182 case PEER_SUCCESS:
1183 switch (previous_status) {
1184 case PEER_TEST_FAILURE:
1185 return INTERNAL_ERROR;
1186 case PEER_SUCCESS:
1187 /* Both succeeded. */
1188 return HANDSHAKE_SUCCESS;
1189 case PEER_WAITING:
1190 case PEER_RETRY:
1191 /* Let the first peer finish. */
1192 return HANDSHAKE_RETRY;
1193 case PEER_ERROR:
1194 /*
1195 * Second peer succeeded despite the fact that the first peer
1196 * already errored. This shouldn't happen.
1197 */
1198 return INTERNAL_ERROR;
1199 }
1200 break;
1201
1202 case PEER_RETRY:
1203 return HANDSHAKE_RETRY;
1204
1205 case PEER_ERROR:
1206 switch (previous_status) {
1207 case PEER_TEST_FAILURE:
1208 return INTERNAL_ERROR;
1209 case PEER_WAITING:
1210 /* The client failed immediately before sending the ClientHello */
1211 return client_spoke_last ? CLIENT_ERROR : INTERNAL_ERROR;
1212 case PEER_SUCCESS:
1213 /* First peer succeeded but second peer errored. */
1214 return client_spoke_last ? CLIENT_ERROR : SERVER_ERROR;
1215 case PEER_RETRY:
1216 /* We errored; let the peer finish. */
1217 return HANDSHAKE_RETRY;
1218 case PEER_ERROR:
1219 /* Both peers errored. Return the one that errored first. */
1220 return client_spoke_last ? SERVER_ERROR : CLIENT_ERROR;
1221 }
1222 }
1223 /* Control should never reach here. */
1224 return INTERNAL_ERROR;
1225}
1226
1227/* Convert unsigned char buf's that shouldn't contain any NUL-bytes to char. */
1228static char *dup_str(const unsigned char *in, size_t len)
1229{
1230 char *ret = NULL;
1231
1232 if (len == 0)
1233 return NULL;
1234
1235 /* Assert that the string does not contain NUL-bytes. */
1236 if (TEST_size_t_eq(OPENSSL_strnlen((const char*)(in), len), len))
1237 TEST_ptr(ret = OPENSSL_strndup((const char*)(in), len));
1238 return ret;
1239}
1240
1241static int pkey_type(EVP_PKEY *pkey)
1242{
1243 if (EVP_PKEY_is_a(pkey, "EC")) {
1244 char name[80];
1245 size_t name_len;
1246
1247 if (!EVP_PKEY_get_group_name(pkey, name, sizeof(name), &name_len))
1248 return NID_undef;
1249 return OBJ_txt2nid(name);
1250 }
1251 return EVP_PKEY_get_id(pkey);
1252}
1253
1254static int peer_pkey_type(SSL *s)
1255{
1256 X509 *x = SSL_get0_peer_certificate(s);
1257
1258 if (x != NULL)
1259 return pkey_type(X509_get0_pubkey(x));
1260 return NID_undef;
1261}
1262
1263#if !defined(OPENSSL_NO_SCTP) && !defined(OPENSSL_NO_SOCK)
1264static int set_sock_as_sctp(int sock)
1265{
1266 struct sctp_assocparams assocparams;
1267 struct sctp_rtoinfo rto_info;
1268 BIO *tmpbio;
1269
1270 /*
1271 * To allow tests to fail fast (within a second or so), reduce the
1272 * retransmission timeouts and the number of retransmissions.
1273 */
1274 memset(&rto_info, 0, sizeof(struct sctp_rtoinfo));
1275 rto_info.srto_initial = 100;
1276 rto_info.srto_max = 200;
1277 rto_info.srto_min = 50;
1278 (void)setsockopt(sock, IPPROTO_SCTP, SCTP_RTOINFO,
1279 (const void *)&rto_info, sizeof(struct sctp_rtoinfo));
1280 memset(&assocparams, 0, sizeof(struct sctp_assocparams));
1281 assocparams.sasoc_asocmaxrxt = 2;
1282 (void)setsockopt(sock, IPPROTO_SCTP, SCTP_ASSOCINFO,
1283 (const void *)&assocparams,
1284 sizeof(struct sctp_assocparams));
1285
1286 /*
1287 * For SCTP we have to set various options on the socket prior to
1288 * connecting. This is done automatically by BIO_new_dgram_sctp().
1289 * We don't actually need the created BIO though so we free it again
1290 * immediately.
1291 */
1292 tmpbio = BIO_new_dgram_sctp(sock, BIO_NOCLOSE);
1293
1294 if (tmpbio == NULL)
1295 return 0;
1296 BIO_free(tmpbio);
1297
1298 return 1;
1299}
1300
1301static int create_sctp_socks(int *ssock, int *csock)
1302{
1303 BIO_ADDRINFO *res = NULL;
1304 const BIO_ADDRINFO *ai = NULL;
1305 int lsock = INVALID_SOCKET, asock = INVALID_SOCKET;
1306 int consock = INVALID_SOCKET;
1307 int ret = 0;
1308 int family = 0;
1309
1310 if (BIO_sock_init() != 1)
1311 return 0;
1312
1313 /*
1314 * Port is 4463. It could be anything. It will fail if it's already being
1315 * used for some other SCTP service. It seems unlikely though so we don't
1316 * worry about it here.
1317 */
1318 if (!BIO_lookup_ex(NULL, "4463", BIO_LOOKUP_SERVER, family, SOCK_STREAM,
1319 IPPROTO_SCTP, &res))
1320 return 0;
1321
1322 for (ai = res; ai != NULL; ai = BIO_ADDRINFO_next(ai)) {
1323 family = BIO_ADDRINFO_family(ai);
1324 lsock = BIO_socket(family, SOCK_STREAM, IPPROTO_SCTP, 0);
1325 if (lsock == INVALID_SOCKET) {
1326 /* Maybe the kernel doesn't support the socket family, even if
1327 * BIO_lookup() added it in the returned result...
1328 */
1329 continue;
1330 }
1331
1332 if (!set_sock_as_sctp(lsock)
1333 || !BIO_listen(lsock, BIO_ADDRINFO_address(ai),
1334 BIO_SOCK_REUSEADDR)) {
1335 BIO_closesocket(lsock);
1336 lsock = INVALID_SOCKET;
1337 continue;
1338 }
1339
1340 /* Success, don't try any more addresses */
1341 break;
1342 }
1343
1344 if (lsock == INVALID_SOCKET)
1345 goto err;
1346
1347 BIO_ADDRINFO_free(res);
1348 res = NULL;
1349
1350 if (!BIO_lookup_ex(NULL, "4463", BIO_LOOKUP_CLIENT, family, SOCK_STREAM,
1351 IPPROTO_SCTP, &res))
1352 goto err;
1353
1354 consock = BIO_socket(family, SOCK_STREAM, IPPROTO_SCTP, 0);
1355 if (consock == INVALID_SOCKET)
1356 goto err;
1357
1358 if (!set_sock_as_sctp(consock)
1359 || !BIO_connect(consock, BIO_ADDRINFO_address(res), 0)
1360 || !BIO_socket_nbio(consock, 1))
1361 goto err;
1362
1363 asock = BIO_accept_ex(lsock, NULL, BIO_SOCK_NONBLOCK);
1364 if (asock == INVALID_SOCKET)
1365 goto err;
1366
1367 *csock = consock;
1368 *ssock = asock;
1369 consock = asock = INVALID_SOCKET;
1370 ret = 1;
1371
1372 err:
1373 BIO_ADDRINFO_free(res);
1374 if (consock != INVALID_SOCKET)
1375 BIO_closesocket(consock);
1376 if (lsock != INVALID_SOCKET)
1377 BIO_closesocket(lsock);
1378 if (asock != INVALID_SOCKET)
1379 BIO_closesocket(asock);
1380 return ret;
1381}
1382#endif
1383
1384/*
1385 * Note that |extra| points to the correct client/server configuration
1386 * within |test_ctx|. When configuring the handshake, general mode settings
1387 * are taken from |test_ctx|, and client/server-specific settings should be
1388 * taken from |extra|.
1389 *
1390 * The configuration code should never reach into |test_ctx->extra| or
1391 * |test_ctx->resume_extra| directly.
1392 *
1393 * (We could refactor test mode settings into a substructure. This would result
1394 * in cleaner argument passing but would complicate the test configuration
1395 * parsing.)
1396 */
1397static HANDSHAKE_RESULT *do_handshake_internal(
1398 SSL_CTX *server_ctx, SSL_CTX *server2_ctx, SSL_CTX *client_ctx,
1399 const SSL_TEST_CTX *test_ctx, const SSL_TEST_EXTRA_CONF *extra,
1400 SSL_SESSION *session_in, SSL_SESSION *serv_sess_in,
1401 SSL_SESSION **session_out, SSL_SESSION **serv_sess_out)
1402{
1403 PEER server, client;
1404 BIO *client_to_server = NULL, *server_to_client = NULL;
1405 HANDSHAKE_EX_DATA server_ex_data, client_ex_data;
1406 CTX_DATA client_ctx_data, server_ctx_data, server2_ctx_data;
1407 HANDSHAKE_RESULT *ret = HANDSHAKE_RESULT_new();
1408 int client_turn = 1, client_turn_count = 0, client_wait_count = 0;
1409 connect_phase_t phase = HANDSHAKE;
1410 handshake_status_t status = HANDSHAKE_RETRY;
1411 const unsigned char* tick = NULL;
1412 size_t tick_len = 0;
1413 const unsigned char* sess_id = NULL;
1414 unsigned int sess_id_len = 0;
1415 SSL_SESSION* sess = NULL;
1416 const unsigned char *proto = NULL;
1417 /* API dictates unsigned int rather than size_t. */
1418 unsigned int proto_len = 0;
1419 EVP_PKEY *tmp_key;
1420 const STACK_OF(X509_NAME) *names;
1421 time_t start;
1422 const char* cipher;
1423
1424 if (ret == NULL)
1425 return NULL;
1426
1427 memset(&server_ctx_data, 0, sizeof(server_ctx_data));
1428 memset(&server2_ctx_data, 0, sizeof(server2_ctx_data));
1429 memset(&client_ctx_data, 0, sizeof(client_ctx_data));
1430 memset(&server, 0, sizeof(server));
1431 memset(&client, 0, sizeof(client));
1432 memset(&server_ex_data, 0, sizeof(server_ex_data));
1433 memset(&client_ex_data, 0, sizeof(client_ex_data));
1434
1435 if (!configure_handshake_ctx(server_ctx, server2_ctx, client_ctx,
1436 test_ctx, extra, &server_ctx_data,
1437 &server2_ctx_data, &client_ctx_data)) {
1438 TEST_note("configure_handshake_ctx");
1439 HANDSHAKE_RESULT_free(ret);
1440 return NULL;
1441 }
1442
1443#if !defined(OPENSSL_NO_SCTP) && !defined(OPENSSL_NO_SOCK)
1444 if (test_ctx->enable_client_sctp_label_bug)
1445 SSL_CTX_set_mode(client_ctx, SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG);
1446 if (test_ctx->enable_server_sctp_label_bug)
1447 SSL_CTX_set_mode(server_ctx, SSL_MODE_DTLS_SCTP_LABEL_LENGTH_BUG);
1448#endif
1449
1450 /* Setup SSL and buffers; additional configuration happens below. */
1451 if (!create_peer(&server, server_ctx)) {
1452 TEST_note("creating server context");
1453 goto err;
1454 }
1455 if (!create_peer(&client, client_ctx)) {
1456 TEST_note("creating client context");
1457 goto err;
1458 }
1459
1460 server.bytes_to_write = client.bytes_to_read = test_ctx->app_data_size;
1461 client.bytes_to_write = server.bytes_to_read = test_ctx->app_data_size;
1462
1463 configure_handshake_ssl(server.ssl, client.ssl, extra);
1464 if (session_in != NULL) {
1465 SSL_SESSION_get_id(serv_sess_in, &sess_id_len);
1466 /* In case we're testing resumption without tickets. */
1467 if ((sess_id_len > 0
1468 && !TEST_true(SSL_CTX_add_session(server_ctx,
1469 serv_sess_in)))
1470 || !TEST_true(SSL_set_session(client.ssl, session_in)))
1471 goto err;
1472 sess_id_len = 0;
1473 }
1474
1475 ret->result = SSL_TEST_INTERNAL_ERROR;
1476
1477 if (test_ctx->use_sctp) {
1478#if !defined(OPENSSL_NO_SCTP) && !defined(OPENSSL_NO_SOCK)
1479 int csock, ssock;
1480
1481 if (create_sctp_socks(&ssock, &csock)) {
1482 client_to_server = BIO_new_dgram_sctp(csock, BIO_CLOSE);
1483 server_to_client = BIO_new_dgram_sctp(ssock, BIO_CLOSE);
1484 }
1485#endif
1486 } else {
1487 client_to_server = BIO_new(BIO_s_mem());
1488 server_to_client = BIO_new(BIO_s_mem());
1489 }
1490
1491 if (!TEST_ptr(client_to_server)
1492 || !TEST_ptr(server_to_client))
1493 goto err;
1494
1495 /* Non-blocking bio. */
1496 BIO_set_nbio(client_to_server, 1);
1497 BIO_set_nbio(server_to_client, 1);
1498
1499 SSL_set_connect_state(client.ssl);
1500 SSL_set_accept_state(server.ssl);
1501
1502 /* The bios are now owned by the SSL object. */
1503 if (test_ctx->use_sctp) {
1504 SSL_set_bio(client.ssl, client_to_server, client_to_server);
1505 SSL_set_bio(server.ssl, server_to_client, server_to_client);
1506 } else {
1507 SSL_set_bio(client.ssl, server_to_client, client_to_server);
1508 if (!TEST_int_gt(BIO_up_ref(server_to_client), 0)
1509 || !TEST_int_gt(BIO_up_ref(client_to_server), 0))
1510 goto err;
1511 SSL_set_bio(server.ssl, client_to_server, server_to_client);
1512 }
1513
1514 ex_data_idx = SSL_get_ex_new_index(0, "ex data", NULL, NULL, NULL);
1515 if (!TEST_int_ge(ex_data_idx, 0)
1516 || !TEST_int_eq(SSL_set_ex_data(server.ssl, ex_data_idx, &server_ex_data), 1)
1517 || !TEST_int_eq(SSL_set_ex_data(client.ssl, ex_data_idx, &client_ex_data), 1))
1518 goto err;
1519
1520 SSL_set_info_callback(server.ssl, &info_cb);
1521 SSL_set_info_callback(client.ssl, &info_cb);
1522
1523 client.status = PEER_RETRY;
1524 server.status = PEER_WAITING;
1525
1526 start = time(NULL);
1527
1528 /*
1529 * Half-duplex handshake loop.
1530 * Client and server speak to each other synchronously in the same process.
1531 * We use non-blocking BIOs, so whenever one peer blocks for read, it
1532 * returns PEER_RETRY to indicate that it's the other peer's turn to write.
1533 * The handshake succeeds once both peers have succeeded. If one peer
1534 * errors out, we also let the other peer retry (and presumably fail).
1535 */
1536 for(;;) {
1537 if (client_turn) {
1538 do_connect_step(test_ctx, &client, phase);
1539 status = handshake_status(client.status, server.status,
1540 1 /* client went last */);
1541 if (server.status == PEER_WAITING)
1542 server.status = PEER_RETRY;
1543 } else {
1544 do_connect_step(test_ctx, &server, phase);
1545 status = handshake_status(server.status, client.status,
1546 0 /* server went last */);
1547 }
1548
1549 switch (status) {
1550 case HANDSHAKE_SUCCESS:
1551 client_turn_count = 0;
1552 phase = next_phase(test_ctx, phase);
1553 if (phase == CONNECTION_DONE) {
1554 ret->result = SSL_TEST_SUCCESS;
1555 goto err;
1556 } else {
1557 client.status = server.status = PEER_RETRY;
1558 /*
1559 * For now, client starts each phase. Since each phase is
1560 * started separately, we can later control this more
1561 * precisely, for example, to test client-initiated and
1562 * server-initiated shutdown.
1563 */
1564 client_turn = 1;
1565 break;
1566 }
1567 case CLIENT_ERROR:
1568 ret->result = SSL_TEST_CLIENT_FAIL;
1569 goto err;
1570 case SERVER_ERROR:
1571 ret->result = SSL_TEST_SERVER_FAIL;
1572 goto err;
1573 case INTERNAL_ERROR:
1574 ret->result = SSL_TEST_INTERNAL_ERROR;
1575 goto err;
1576 case HANDSHAKE_RETRY:
1577 if (test_ctx->use_sctp) {
1578 if (time(NULL) - start > 3) {
1579 /*
1580 * We've waited for too long. Give up.
1581 */
1582 ret->result = SSL_TEST_INTERNAL_ERROR;
1583 goto err;
1584 }
1585 /*
1586 * With "real" sockets we only swap to processing the peer
1587 * if they are expecting to retry. Otherwise we just retry the
1588 * same endpoint again.
1589 */
1590 if ((client_turn && server.status == PEER_RETRY)
1591 || (!client_turn && client.status == PEER_RETRY))
1592 client_turn ^= 1;
1593 } else {
1594 if (client_turn_count++ >= 2000) {
1595 /*
1596 * At this point, there's been so many PEER_RETRY in a row
1597 * that it's likely both sides are stuck waiting for a read.
1598 * It's time to give up.
1599 */
1600 ret->result = SSL_TEST_INTERNAL_ERROR;
1601 goto err;
1602 }
1603 if (client_turn && server.status == PEER_SUCCESS) {
1604 /*
1605 * The server may finish before the client because the
1606 * client spends some turns processing NewSessionTickets.
1607 */
1608 if (client_wait_count++ >= 2) {
1609 ret->result = SSL_TEST_INTERNAL_ERROR;
1610 goto err;
1611 }
1612 } else {
1613 /* Continue. */
1614 client_turn ^= 1;
1615 }
1616 }
1617 break;
1618 }
1619 }
1620 err:
1621 ret->server_alert_sent = server_ex_data.alert_sent;
1622 ret->server_num_fatal_alerts_sent = server_ex_data.num_fatal_alerts_sent;
1623 ret->server_alert_received = client_ex_data.alert_received;
1624 ret->client_alert_sent = client_ex_data.alert_sent;
1625 ret->client_num_fatal_alerts_sent = client_ex_data.num_fatal_alerts_sent;
1626 ret->client_alert_received = server_ex_data.alert_received;
1627 ret->server_protocol = SSL_version(server.ssl);
1628 ret->client_protocol = SSL_version(client.ssl);
1629 ret->servername = server_ex_data.servername;
1630 if ((sess = SSL_get0_session(client.ssl)) != NULL) {
1631 SSL_SESSION_get0_ticket(sess, &tick, &tick_len);
1632 sess_id = SSL_SESSION_get_id(sess, &sess_id_len);
1633 }
1634 if (tick == NULL || tick_len == 0)
1635 ret->session_ticket = SSL_TEST_SESSION_TICKET_NO;
1636 else
1637 ret->session_ticket = SSL_TEST_SESSION_TICKET_YES;
1638 ret->compression = (SSL_get_current_compression(client.ssl) == NULL)
1639 ? SSL_TEST_COMPRESSION_NO
1640 : SSL_TEST_COMPRESSION_YES;
1641 if (sess_id == NULL || sess_id_len == 0)
1642 ret->session_id = SSL_TEST_SESSION_ID_NO;
1643 else
1644 ret->session_id = SSL_TEST_SESSION_ID_YES;
1645 ret->session_ticket_do_not_call = server_ex_data.session_ticket_do_not_call;
1646
1647 if (extra->client.verify_callback == SSL_TEST_VERIFY_RETRY_ONCE
1648 && n_retries != -1)
1649 ret->result = SSL_TEST_SERVER_FAIL;
1650
1651#ifndef OPENSSL_NO_NEXTPROTONEG
1652 SSL_get0_next_proto_negotiated(client.ssl, &proto, &proto_len);
1653 ret->client_npn_negotiated = dup_str(proto, proto_len);
1654
1655 SSL_get0_next_proto_negotiated(server.ssl, &proto, &proto_len);
1656 ret->server_npn_negotiated = dup_str(proto, proto_len);
1657#endif
1658
1659 SSL_get0_alpn_selected(client.ssl, &proto, &proto_len);
1660 ret->client_alpn_negotiated = dup_str(proto, proto_len);
1661
1662 SSL_get0_alpn_selected(server.ssl, &proto, &proto_len);
1663 ret->server_alpn_negotiated = dup_str(proto, proto_len);
1664
1665 if ((sess = SSL_get0_session(server.ssl)) != NULL) {
1666 SSL_SESSION_get0_ticket_appdata(sess, (void**)&tick, &tick_len);
1667 ret->result_session_ticket_app_data = OPENSSL_strndup((const char*)tick, tick_len);
1668 }
1669
1670 ret->client_resumed = SSL_session_reused(client.ssl);
1671 ret->server_resumed = SSL_session_reused(server.ssl);
1672
1673 cipher = SSL_CIPHER_get_name(SSL_get_current_cipher(client.ssl));
1674 ret->cipher = dup_str((const unsigned char*)cipher, strlen(cipher));
1675
1676 if (session_out != NULL)
1677 *session_out = SSL_get1_session(client.ssl);
1678 if (serv_sess_out != NULL) {
1679 SSL_SESSION *tmp = SSL_get_session(server.ssl);
1680
1681 /*
1682 * We create a fresh copy that is not in the server session ctx linked
1683 * list.
1684 */
1685 if (tmp != NULL)
1686 *serv_sess_out = SSL_SESSION_dup(tmp);
1687 }
1688
1689 if (SSL_get_peer_tmp_key(client.ssl, &tmp_key)) {
1690 ret->tmp_key_type = pkey_type(tmp_key);
1691 EVP_PKEY_free(tmp_key);
1692 }
1693
1694 SSL_get_peer_signature_nid(client.ssl, &ret->server_sign_hash);
1695 SSL_get_peer_signature_nid(server.ssl, &ret->client_sign_hash);
1696
1697 SSL_get_peer_signature_type_nid(client.ssl, &ret->server_sign_type);
1698 SSL_get_peer_signature_type_nid(server.ssl, &ret->client_sign_type);
1699
1700 names = SSL_get0_peer_CA_list(client.ssl);
1701 if (names == NULL)
1702 ret->client_ca_names = NULL;
1703 else
1704 ret->client_ca_names = SSL_dup_CA_list(names);
1705
1706 names = SSL_get0_peer_CA_list(server.ssl);
1707 if (names == NULL)
1708 ret->server_ca_names = NULL;
1709 else
1710 ret->server_ca_names = SSL_dup_CA_list(names);
1711
1712 ret->server_cert_type = peer_pkey_type(client.ssl);
1713 ret->client_cert_type = peer_pkey_type(server.ssl);
1714
1715 ctx_data_free_data(&server_ctx_data);
1716 ctx_data_free_data(&server2_ctx_data);
1717 ctx_data_free_data(&client_ctx_data);
1718
1719 peer_free_data(&server);
1720 peer_free_data(&client);
1721 return ret;
1722}
1723
1724HANDSHAKE_RESULT *do_handshake(SSL_CTX *server_ctx, SSL_CTX *server2_ctx,
1725 SSL_CTX *client_ctx, SSL_CTX *resume_server_ctx,
1726 SSL_CTX *resume_client_ctx,
1727 const SSL_TEST_CTX *test_ctx)
1728{
1729 HANDSHAKE_RESULT *result;
1730 SSL_SESSION *session = NULL, *serv_sess = NULL;
1731
1732 result = do_handshake_internal(server_ctx, server2_ctx, client_ctx,
1733 test_ctx, &test_ctx->extra,
1734 NULL, NULL, &session, &serv_sess);
1735 if (result == NULL
1736 || test_ctx->handshake_mode != SSL_TEST_HANDSHAKE_RESUME
1737 || result->result == SSL_TEST_INTERNAL_ERROR)
1738 goto end;
1739
1740 if (result->result != SSL_TEST_SUCCESS) {
1741 result->result = SSL_TEST_FIRST_HANDSHAKE_FAILED;
1742 goto end;
1743 }
1744
1745 HANDSHAKE_RESULT_free(result);
1746 /* We don't support SNI on second handshake yet, so server2_ctx is NULL. */
1747 result = do_handshake_internal(resume_server_ctx, NULL, resume_client_ctx,
1748 test_ctx, &test_ctx->resume_extra,
1749 session, serv_sess, NULL, NULL);
1750 end:
1751 SSL_SESSION_free(session);
1752 SSL_SESSION_free(serv_sess);
1753 return result;
1754}
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette