unix-Makefile.tmpl@ 99443

Last change on this file since 99443 was 99366, checked in by vboxsync, 22 months ago
openssl-3.1.0: Applied and adjusted our OpenSSL changes to 3.0.7. bugref:10418
File size: 78.2 KB

Line
1	##
2	## Makefile for OpenSSL
3	##
4	## {- join("\n## ", @autowarntext) -}
5	{-
6	use OpenSSL::Util;
7
8	our $makedep_scheme = $config{makedep_scheme};
9	our $makedepcmd = platform->makedepcmd();
10
11	sub windowsdll { $config{target} =~ /^(?:Cygwin\|mingw)/ }
12
13	# Shared AIX support is special. We put libcrypto[64].so.ver into
14	# libcrypto.a and use libcrypto_a.a as static one.
15	sub sharedaix { !$disabled{shared} && $config{target} =~ /^aix/ }
16
17	our $sover_dirname = platform->shlib_version_as_filename();
18
19	# This makes sure things get built in the order they need
20	# to. You're welcome.
21	sub dependmagic {
22	my $target = shift;
23
24	return "$target: build_generated\n\t\$(MAKE) depend && \$(MAKE) _$target\n_$target";
25	}
26
27	our $COLUMNS = $ENV{COLUMNS};
28	if ($COLUMNS =~ /^\d+$/) {
29	$COLUMNS = int($COLUMNS) - 2; # 2 to leave space for ending ' \'
30	} else {
31	$COLUMNS = 76;
32	}
33
34	sub fill_lines {
35	my $item_sep = shift; # string
36	my $line_length = shift; # number of chars
37
38	my @result = ();
39	my $resultpos = 0;
40
41	foreach (@_) {
42	my $fill_line = $result[$resultpos] // '';
43	my $newline =
44	($fill_line eq '' ? '' : $fill_line . $item_sep) . $_;
45
46	if (length($newline) > $line_length) {
47	# If this is a single item and the intended result line
48	# is empty, we put it there anyway
49	if ($fill_line eq '') {
50	$result[$resultpos++] = $newline;
51	} else {
52	$result[++$resultpos] = $_;
53	}
54	} else {
55	$result[$resultpos] = $newline;
56	}
57	}
58	return @result;
59	}
60	'';
61	-}
62	PLATFORM={- $config{target} -}
63	OPTIONS={- $config{options} -}
64	CONFIGURE_ARGS=({- join(", ",quotify_l(@{$config{perlargv}})) -})
65	SRCDIR={- $config{sourcedir} -}
66	BLDDIR={- $config{builddir} -}
67	FIPSKEY={- $config{FIPSKEY} -}
68
69	VERSION={- "$config{full_version}" -}
70	VERSION_NUMBER={- "$config{version}" -}
71	MAJOR={- $config{major} -}
72	MINOR={- $config{minor} -}
73	SHLIB_VERSION_NUMBER={- $config{shlib_version} -}
74	SHLIB_TARGET={- $target{shared_target} -}
75
76	LIBS={- join(" \\\n" . ' ' x 5,
77	fill_lines(" ", $COLUMNS - 5,
78	map { platform->staticlib($_) // () }
79	@{$unified_info{libraries}})) -}
80	SHLIBS={- join(" \\\n" . ' ' x 7,
81	fill_lines(" ", $COLUMNS - 7,
82	map { platform->sharedlib($_) // () }
83	@{$unified_info{libraries}})) -}
84	SHLIB_INFO={- join(" \\\n" . ' ' x 11,
85	fill_lines(" ", $COLUMNS - 11,
86	map { my $x = platform->sharedlib($_);
87	my $y = platform->sharedlib_simple($_) // '';
88	my $z = platform->sharedlib_import($_) // '';
89	$x ? "\"$x;$y;$z\"" : () }
90	@{$unified_info{libraries}})) -}
91	MODULES={- join(" \\\n" . ' ' x 8,
92	fill_lines(" ", $COLUMNS - 8,
93	map { platform->dso($_) }
94	# Drop all modules that are dependencies, they will
95	# be processed through their dependents
96	grep { my $x = $_;
97	!grep { grep { $_ eq $x } @$_ }
98	values %{$unified_info{depends}} }
99	@{$unified_info{modules}})) -}
100	FIPSMODULE={- # We do some extra checking here, as there should be only one
101	use File::Basename;
102	our @fipsmodules =
103	grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
104	&& $unified_info{attributes}->{modules}->{$_}->{fips} }
105	@{$unified_info{modules}};
106	die "More that one FIPS module" if scalar @fipsmodules > 1;
107	join(" ", map { platform->dso($_) } @fipsmodules) -}
108	FIPSMODULENAME={- die "More that one FIPS module" if scalar @fipsmodules > 1;
109	join(" ", map { basename(platform->dso($_)) } @fipsmodules) -}
110
111	PROGRAMS={- join(" \\\n" . ' ' x 9,
112	fill_lines(" ", $COLUMNS - 9,
113	map { platform->bin($_) }
114	@{$unified_info{programs}})) -}
115	SCRIPTS={- join(" \\\n" . ' ' x 8,
116	fill_lines(" ", $COLUMNS - 8, @{$unified_info{scripts}})) -}
117	{- output_off() if $disabled{makedepend}; "" -}
118	DEPS={- join(" \\\n" . ' ' x 5,
119	fill_lines(" ", $COLUMNS - 5,
120	map { platform->isobj($_) ? platform->dep($_) : () }
121	grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
122	keys %{$unified_info{sources}})); -}
123	{- output_on() if $disabled{makedepend}; "" -}
124	GENERATED_MANDATORY={- join(" \\\n" . ' ' x 20,
125	fill_lines(" ", $COLUMNS - 20,
126	@{$unified_info{depends}->{""}})) -}
127	GENERATED_PODS={- # common0.tmpl provides @generated
128	join(" \\\n" . ' ' x 15,
129	fill_lines(" ", $COLUMNS - 15,
130	map { my $x = $_;
131	(
132	grep {
133	$unified_info{attributes}->{depends}
134	->{$x}->{$_}->{pod} // 0
135	}
136	keys %{$unified_info{attributes}->{depends}->{$x}}
137	) ? $x : ();
138	}
139	@generated)) -}
140	GENERATED={- # common0.tmpl provides @generated
141	join(" \\\n" . ' ' x 5,
142	fill_lines(" ", $COLUMNS - 5,
143	map { platform->convertext($_) } @generated )) -}
144
145	INSTALL_LIBS={-
146	join(" \\\n" . ' ' x 13,
147	fill_lines(" ", $COLUMNS - 13,
148	map { platform->staticlib($_) // () }
149	grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
150	@{$unified_info{libraries}}))
151	-}
152	INSTALL_SHLIBS={-
153	join(" \\\n" . ' ' x 15,
154	fill_lines(" ", $COLUMNS - 15,
155	map { platform->sharedlib($_) // () }
156	grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
157	@{$unified_info{libraries}}))
158	-}
159	INSTALL_SHLIB_INFO={-
160	join(" \\\n" . ' ' x 19,
161	fill_lines(" ", $COLUMNS - 19,
162	map { my $x = platform->sharedlib($_);
163	my $y = platform->sharedlib_simple($_) // '';
164	my $z = platform->sharedlib_import($_) // '';
165	$x ? "\"$x;$y;$z\"" : () }
166	grep { !$unified_info{attributes}->{libraries}->{$_}->{noinst} }
167	@{$unified_info{libraries}}))
168	-}
169	INSTALL_ENGINES={-
170	join(" \\\n" . ' ' x 16,
171	fill_lines(" ", $COLUMNS - 16,
172	map { platform->dso($_) }
173	grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
174	&& $unified_info{attributes}->{modules}->{$_}->{engine} }
175	@{$unified_info{modules}}))
176	-}
177	INSTALL_MODULES={-
178	join(" \\\n" . ' ' x 16,
179	fill_lines(" ", $COLUMNS - 16,
180	map { platform->dso($_) }
181	grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
182	&& !$unified_info{attributes}->{modules}->{$_}->{engine}
183	&& !$unified_info{attributes}->{modules}->{$_}->{fips} }
184	@{$unified_info{modules}}))
185	-}
186	INSTALL_FIPSMODULE={-
187	join(" \\\n" . ' ' x 16,
188	fill_lines(" ", $COLUMNS - 16,
189	map { platform->dso($_) }
190	grep { !$unified_info{attributes}->{modules}->{$_}->{noinst}
191	&& $unified_info{attributes}->{modules}->{$_}->{fips} }
192	@{$unified_info{modules}}))
193	-}
194	INSTALL_FIPSMODULECONF=providers/fipsmodule.cnf
195	INSTALL_PROGRAMS={-
196	join(" \\\n" . ' ' x 16,
197	fill_lines(" ", $COLUMNS - 16, map { platform->bin($_) }
198	grep { !$unified_info{attributes}->{programs}->{$_}->{noinst} }
199	@{$unified_info{programs}}))
200	-}
201	BIN_SCRIPTS={-
202	join(" \\\n" . ' ' x 12,
203	fill_lines(" ", $COLUMNS - 12,
204	map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname};
205	$x ? "$_:$x" : $_ }
206	grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
207	&& !$unified_info{attributes}->{scripts}->{$_}->{misc} }
208	@{$unified_info{scripts}}))
209	-}
210	MISC_SCRIPTS={-
211	join(" \\\n" . ' ' x 13,
212	fill_lines(" ", $COLUMNS - 13,
213	map { my $x = $unified_info{attributes}->{scripts}->{$_}->{linkname};
214	$x ? "$_:$x" : $_ }
215	grep { !$unified_info{attributes}->{scripts}->{$_}->{noinst}
216	&& $unified_info{attributes}->{scripts}->{$_}->{misc} }
217	@{$unified_info{scripts}}))
218	-}
219	IMAGEDOCS1={-
220	join(" \\\n" . ' ' x 10,
221	fill_lines(" ", $COLUMNS - 10,
222	@{$unified_info{imagedocs}->{man1}})) -}
223	IMAGEDOCS3={-
224	join(" \\\n" . ' ' x 10,
225	fill_lines(" ", $COLUMNS - 10,
226	@{$unified_info{imagedocs}->{man3}})) -}
227	IMAGEDOCS5={-
228	join(" \\\n" . ' ' x 10,
229	fill_lines(" ", $COLUMNS - 10,
230	@{$unified_info{imagedocs}->{man5}})) -}
231	IMAGEDOCS7={-
232	join(" \\\n" . ' ' x 10,
233	fill_lines(" ", $COLUMNS - 10,
234	@{$unified_info{imagedocs}->{man7}})) -}
235	HTMLDOCS1={-
236	join(" \\\n" . ' ' x 10,
237	fill_lines(" ", $COLUMNS - 10,
238	@{$unified_info{htmldocs}->{man1}})) -}
239	HTMLDOCS3={-
240	join(" \\\n" . ' ' x 10,
241	fill_lines(" ", $COLUMNS - 10,
242	@{$unified_info{htmldocs}->{man3}})) -}
243	HTMLDOCS5={-
244	join(" \\\n" . ' ' x 10,
245	fill_lines(" ", $COLUMNS - 10,
246	@{$unified_info{htmldocs}->{man5}})) -}
247	HTMLDOCS7={-
248	join(" \\\n" . ' ' x 10,
249	fill_lines(" ", $COLUMNS - 10,
250	@{$unified_info{htmldocs}->{man7}})) -}
251	MANDOCS1={-
252	join(" \\\n" . ' ' x 9,
253	fill_lines(" ", $COLUMNS - 9,
254	@{$unified_info{mandocs}->{man1}})) -}
255	MANDOCS3={-
256	join(" \\\n" . ' ' x 9,
257	fill_lines(" ", $COLUMNS - 9,
258	@{$unified_info{mandocs}->{man3}})) -}
259	MANDOCS5={-
260	join(" \\\n" . ' ' x 9,
261	fill_lines(" ", $COLUMNS - 9,
262	@{$unified_info{mandocs}->{man5}})) -}
263	MANDOCS7={-
264	join(" \\\n" . ' ' x 9,
265	fill_lines(" ", $COLUMNS - 9,
266	@{$unified_info{mandocs}->{man7}})) -}
267
268	APPS_OPENSSL="{- use File::Spec::Functions;
269	catfile("apps","openssl") -}"
270
271	# DESTDIR is for package builders so that they can configure for, say,
272	# /usr/ and yet have everything installed to /tmp/somedir/usr/.
273	# Normally it is left empty.
274	DESTDIR=
275
276	# Do not edit these manually. Use Configure with --prefix or --openssldir
277	# to change this! Short explanation in the top comment in Configure
278	INSTALLTOP={- # $prefix is used in the OPENSSLDIR perl snippet
279	#
280	our $prefix = $config{prefix} \|\| "/usr/local";
281	$prefix -}
282	OPENSSLDIR={- #
283	# The logic here is that if no --openssldir was given,
284	# OPENSSLDIR will get the value from $prefix plus "/ssl".
285	# If --openssldir was given and the value is an absolute
286	# path, OPENSSLDIR will get its value without change.
287	# If the value from --openssldir is a relative path,
288	# OPENSSLDIR will get $prefix with the --openssldir
289	# value appended as a subdirectory.
290	#
291	use File::Spec::Functions;
292	our $openssldir =
293	$config{openssldir} ?
294	(file_name_is_absolute($config{openssldir}) ?
295	$config{openssldir}
296	: catdir($prefix, $config{openssldir}))
297	: catdir($prefix, "ssl");
298	$openssldir -}
299	LIBDIR={- our $libdir = $config{libdir};
300	unless ($libdir) {
301	$libdir = "lib$target{multilib}";
302	}
303	file_name_is_absolute($libdir) ? "" : $libdir -}
304	# $(libdir) is chosen to be compatible with the GNU coding standards
305	libdir={- file_name_is_absolute($libdir)
306	? $libdir : '$(INSTALLTOP)/$(LIBDIR)' -}
307	ENGINESDIR=$(libdir)/engines-{- $sover_dirname -}
308	MODULESDIR=$(libdir)/ossl-modules
309
310	# Convenience variable for those who want to set the rpath in shared
311	# libraries and applications
312	LIBRPATH=$(libdir)
313
314	MANDIR=$(INSTALLTOP)/share/man
315	DOCDIR=$(INSTALLTOP)/share/doc/$(BASENAME)
316	HTMLDIR=$(DOCDIR)/html
317
318	# MANSUFFIX is for the benefit of anyone who may want to have a suffix
319	# appended after the manpage file section number. "ssl" is popular,
320	# resulting in files such as config.5ssl rather than config.5.
321	MANSUFFIX=ossl
322	HTMLSUFFIX=html
323
324	# For "optional" echo messages, to get "real" silence
325	ECHO = echo
326
327	##### User defined commands and flags ################################
328
329	# We let the C compiler driver to take care of .s files. This is done in
330	# order to be excused from maintaining a separate set of architecture
331	# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
332	# gcc, then the driver will automatically translate it to -xarch=v8plus
333	# and pass it down to assembler. In any case, we do not define AS or
334	# ASFLAGS for this reason.
335
336	CROSS_COMPILE={- $config{CROSS_COMPILE} -}
337	CC=$(CROSS_COMPILE){- $config{CC} -}
338	CXX={- $config{CXX} ? "\$(CROSS_COMPILE)$config{CXX}" : '' -}
339	CPPFLAGS={- our $cppflags1 = join(" ",
340	(map { "-D".$_} @{$config{CPPDEFINES}}),
341	(map { "-I".$_} @{$config{CPPINCLUDES}}),
342	@{$config{CPPFLAGS}}) -}
343	CFLAGS={- join(' ', @{$config{CFLAGS}}) -}
344	CXXFLAGS={- join(' ', @{$config{CXXFLAGS}}) -}
345	LDFLAGS= {- join(' ', @{$config{LDFLAGS}}) -}
346	EX_LIBS= {- join(' ', @{$config{LDLIBS}}) -}
347
348	MAKEDEPEND={- $config{makedepcmd} -}
349
350	PERL={- $config{PERL} -}
351
352	AR=$(CROSS_COMPILE){- $config{AR} -}
353	ARFLAGS= {- join(' ', @{$config{ARFLAGS}}) -}
354	RANLIB={- $config{RANLIB} ? "\$(CROSS_COMPILE)$config{RANLIB}" : "true"; -}
355	RC= $(CROSS_COMPILE){- $config{RC} -}
356	RCFLAGS={- join(' ', @{$config{RCFLAGS}}) -} {- $target{shared_rcflag} -}
357
358	RM= rm -f
359	RMDIR= rmdir
360	TAR= {- $target{TAR} \|\| "tar" -}
361	TARFLAGS= {- $target{TARFLAGS} -}
362
363	BASENAME= openssl
364	NAME= $(BASENAME)-$(VERSION)
365	# Relative to $(SRCDIR)
366	TARFILE= ../$(NAME).tar
367
368	##### Project flags ##################################################
369
370	# Variables starting with CNF_ are common variables for all product types
371
372	CNF_CPPFLAGS={- our $cppflags2 =
373	join(' ', $target{cppflags} \|\| (),
374	(map { "-D".$_} @{$target{defines}},
375	@{$config{defines}}),
376	(map { "-I".$_} @{$target{includes}},
377	@{$config{includes}}),
378	@{$config{cppflags}}) -}
379	CNF_CFLAGS={- join(' ', $target{cflags} \|\| (),
380	@{$config{cflags}}) -}
381	CNF_CXXFLAGS={- join(' ', $target{cxxflags} \|\| (),
382	@{$config{cxxflags}}) -}
383	CNF_LDFLAGS={- join(' ', $target{lflags} \|\| (),
384	@{$config{lflags}}) -}
385	CNF_EX_LIBS={- join(' ', $target{ex_libs} \|\| (),
386	@{$config{ex_libs}}) -}
387
388	# Variables starting with LIB_ are used to build library object files
389	# and shared libraries.
390	# Variables starting with DSO_ are used to build DSOs and their object files.
391	# Variables starting with BIN_ are used to build programs and their object
392	# files.
393
394	LIB_CPPFLAGS={- our $lib_cppflags =
395	join(' ', $target{lib_cppflags} \|\| (),
396	$target{shared_cppflag} \|\| (),
397	(map { '-D'.$_ }
398	@{$target{lib_defines} \|\| ()},
399	@{$target{shared_defines} \|\| ()},
400	@{$config{lib_defines} \|\| ()},
401	@{$config{shared_defines} \|\| ()}),
402	(map { '-I'.quotify1($_) }
403	@{$target{lib_includes}},
404	@{$target{shared_includes}},
405	@{$config{lib_includes}},
406	@{$config{shared_includes}}),
407	@{$config{lib_cppflags}},
408	@{$config{shared_cppflag}});
409	join(' ', $lib_cppflags,
410	(map { '-D'.$_ }
411	'OPENSSLDIR="\"$(OPENSSLDIR)\""',
412	'ENGINESDIR="\"$(ENGINESDIR)\""',
413	'MODULESDIR="\"$(MODULESDIR)\""'),
414	'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
415	LIB_CFLAGS={- join(' ', $target{lib_cflags} \|\| (),
416	$target{shared_cflag} \|\| (),
417	@{$config{lib_cflags}},
418	@{$config{shared_cflag}},
419	'$(CNF_CFLAGS)', '$(CFLAGS)') -}
420	LIB_CXXFLAGS={- join(' ', $target{lib_cxxflags} \|\| (),
421	$target{shared_cxxflag} \|\| (),
422	@{$config{lib_cxxflags}},
423	@{$config{shared_cxxflag}},
424	'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
425	LIB_LDFLAGS={- join(' ', $target{shared_ldflag} \|\| (),
426	$config{shared_ldflag} \|\| (),
427	'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
428	LIB_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
429	DSO_CPPFLAGS={- join(' ', $target{dso_cppflags} \|\| (),
430	$target{module_cppflags} \|\| (),
431	(map { '-D'.$_ }
432	@{$target{dso_defines}},
433	@{$target{module_defines}},
434	@{$config{dso_defines} \|\| ()},
435	@{$config{module_defines} \|\| ()}),
436	(map { '-I'.quotify1($_) }
437	@{$target{dso_includes}},
438	@{$target{module_includes}},
439	@{$config{dso_includes}},
440	@{$config{module_includes}}),
441	@{$config{dso_cppflags}},
442	@{$config{module_cppflags}},
443	'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
444	DSO_CFLAGS={- join(' ', $target{dso_cflags} \|\| (),
445	$target{module_cflags} \|\| (),
446	@{$config{dso_cflags}},
447	@{$config{module_cflags}},
448	'$(CNF_CFLAGS)', '$(CFLAGS)') -}
449	DSO_CXXFLAGS={- join(' ', $target{dso_cxxflags} \|\| (),
450	$target{module_cxxflags} \|\| (),
451	@{$config{dso_cxxflags}},
452	@{$config{module_cxxflag}},
453	'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
454	DSO_LDFLAGS={- join(' ', $target{dso_ldflags} \|\| (),
455	$target{module_ldflags} \|\| (),
456	@{$config{dso_ldflags}},
457	@{$config{module_ldflags}},
458	'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
459	DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
460	BIN_CPPFLAGS={- join(' ', $target{bin_cppflags} \|\| (),
461	(map { '-D'.$_ } @{$config{bin_defines} \|\| ()}),
462	@{$config{bin_cppflags}},
463	'$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
464	BIN_CFLAGS={- join(' ', $target{bin_cflags} \|\| (),
465	@{$config{bin_cflags}},
466	'$(CNF_CFLAGS)', '$(CFLAGS)') -}
467	BIN_CXXFLAGS={- join(' ', $target{bin_cxxflags} \|\| (),
468	@{$config{bin_cxxflags}},
469	'$(CNF_CXXFLAGS)', '$(CXXFLAGS)') -}
470	BIN_LDFLAGS={- join(' ', $target{bin_lflags} \|\| (),
471	@{$config{bin_lflags}},
472	'$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
473	BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
474
475	# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
476	CPPFLAGS_Q={- $cppflags1 =~ s\|([\\"])\|\\$1\|g;
477	$cppflags2 =~ s\|([\\"])\|\\$1\|g;
478	$lib_cppflags =~ s\|([\\"])\|\\$1\|g;
479	join(' ', $lib_cppflags \|\| (), $cppflags2 \|\| (),
480	$cppflags1 \|\| ()) -}
481
482	PERLASM_SCHEME= {- $target{perlasm_scheme} -}
483
484	# For x86 assembler: Set PROCESSOR to 386 if you want to support
485	# the 80386.
486	PROCESSOR= {- $config{processor} -}
487
488	# We want error [and other] messages in English. Trouble is that make(1)
489	# doesn't pass macros down as environment variables unless there already
490	# was corresponding variable originally set. In other words we can only
491	# reassign environment variables, but not set new ones, not in portable
492	# manner that is. That's why we reassign several, just to be sure...
493	LC_ALL=C
494	LC_MESSAGES=C
495	LANG=C
496
497	# The main targets ###################################################
498
499	{- dependmagic('build_sw'); -}: build_libs_nodep build_modules_nodep build_programs_nodep link-utils
500	{- dependmagic('build_libs'); -}: build_libs_nodep
501	{- dependmagic('build_modules'); -}: build_modules_nodep
502	{- dependmagic('build_programs'); -}: build_programs_nodep
503
504	build_generated_pods: $(GENERATED_PODS)
505	build_docs: build_man_docs build_html_docs
506	build_man_docs: $(MANDOCS1) $(MANDOCS3) $(MANDOCS5) $(MANDOCS7)
507	build_html_docs: $(HTMLDOCS1) $(HTMLDOCS3) $(HTMLDOCS5) $(HTMLDOCS7)
508
509	build_generated: $(GENERATED_MANDATORY)
510	build_libs_nodep: libcrypto.pc libssl.pc openssl.pc
511	build_modules_nodep: $(MODULES)
512	build_programs_nodep: $(PROGRAMS) $(SCRIPTS)
513
514	# Kept around for backward compatibility
515	build_apps build_tests: build_programs
516
517	# Convenience target to prebuild all generated files, not just the mandatory
518	# ones
519	build_all_generated: $(GENERATED_MANDATORY) $(GENERATED) build_docs
520	@ : {- output_off() if $disabled{makedepend}; "" -}
521	@echo "Warning: consider configuring with no-makedepend, because if"
522	@echo " target system doesn't have $(PERL),"
523	@echo " then make will fail..."
524	@ : {- output_on() if $disabled{makedepend}; "" -}
525
526	all: build_sw build_docs
527
528	test: tests
529	{- dependmagic('tests'); -}: build_programs_nodep build_modules_nodep link-utils run_tests
530	run_tests:
531	@ : {- output_off() if $disabled{tests}; "" -}
532	( SRCTOP=$(SRCDIR) \
533	BLDTOP=$(BLDDIR) \
534	PERL="$(PERL)" \
535	FIPSKEY="$(FIPSKEY)" \
536	EXE_EXT={- platform->binext() -} \
537	$(PERL) $(SRCDIR)/test/run_tests.pl $(TESTS) )
538	@ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
539	@echo "Tests are not supported with your chosen Configure options"
540	@ : {- output_on() if !$disabled{tests}; "" -}
541
542	list-tests:
543	@ : {- output_off() if $disabled{tests}; "" -}
544	$(MAKE) run_tests TESTS=list
545	@ : {- if ($disabled{tests}) { output_on(); } else { output_off(); } "" -}
546	@echo "Tests are not supported with your chosen Configure options"
547	@ : {- output_on() if !$disabled{tests}; "" -}
548
549	install: install_sw install_ssldirs install_docs {- $disabled{fips} ? "" : "install_fips" -}
550
551	uninstall: uninstall_docs uninstall_sw {- $disabled{fips} ? "" : "uninstall_fips" -}
552
553	libclean:
554	@set -e; for s in $(SHLIB_INFO); do \
555	if [ "$$s" = ";" ]; then continue; fi; \
556	s1=`echo "$$s" \| cut -f1 -d";"`; \
557	s2=`echo "$$s" \| cut -f2 -d";"`; \
558	s3=`echo "$$s" \| cut -f3 -d";"`; \
559	$(ECHO) $(RM) $$s1; {- output_off() unless windowsdll(); "" -}\
560	$(RM) apps/$$s1; \
561	$(RM) test/$$s1; \
562	$(RM) fuzz/$$s1; {- output_on() unless windowsdll(); "" -}\
563	$(RM) $$s1; \
564	if [ "$$s2" != "" ]; then \
565	$(ECHO) $(RM) $$s2; \
566	$(RM) $$s2; \
567	fi; \
568	if [ "$$s3" != "" ]; then \
569	$(ECHO) $(RM) $$s3; \
570	$(RM) $$s3; \
571	fi; \
572	done
573	$(RM) $(LIBS)
574	$(RM) *{- platform->defext() -}
575
576	clean: libclean
577	$(RM) $(HTMLDOCS1)
578	$(RM) $(HTMLDOCS3)
579	$(RM) $(HTMLDOCS5)
580	$(RM) $(HTMLDOCS7)
581	$(RM) $(MANDOCS1)
582	$(RM) $(MANDOCS3)
583	$(RM) $(MANDOCS5)
584	$(RM) $(MANDOCS7)
585	$(RM) $(PROGRAMS) $(TESTPROGS) $(MODULES) $(FIPSMODULE) $(SCRIPTS)
586	$(RM) $(GENERATED_MANDATORY) $(GENERATED)
587	-find . -name '{- platform->depext() -}' \! -name '.' \! -type d -exec $(RM) {} \;
588	-find . -name '{- platform->objext() -}' \! -name '.' \! -type d -exec $(RM) {} \;
589	$(RM) core
590	$(RM) tags TAGS doc-nits md-nits
591	$(RM) -r test/test-runs
592	$(RM) providers/fips*.new
593	$(RM) openssl.pc libcrypto.pc libssl.pc
594	-find . -type l \! -name '.*' -exec $(RM) {} \;
595
596	distclean: clean
597	$(RM) include/openssl/configuration.h
598	$(RM) configdata.pm
599	$(RM) Makefile
600
601	# We check if any depfile is newer than Makefile and decide to
602	# concatenate only if that is true.
603	depend: Makefile
604	@: {- output_off() if $disabled{makedepend}; "" -}
605	@$(PERL) $(SRCDIR)/util/add-depends.pl "{- $makedep_scheme -}"
606	@: {- output_on() if $disabled{makedepend}; "" -}
607
608	# Install helper targets #############################################
609
610	install_sw: install_dev install_engines install_modules install_runtime
611
612	uninstall_sw: uninstall_runtime uninstall_modules uninstall_engines uninstall_dev
613
614	install_docs: install_man_docs install_html_docs
615
616	uninstall_docs: uninstall_man_docs uninstall_html_docs
617	$(RM) -r $(DESTDIR)$(DOCDIR)
618
619	{- output_off() if $disabled{fips}; "" -}
620	install_fips: build_sw $(INSTALL_FIPSMODULECONF)
621	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
622	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MODULESDIR)
623	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)
624	@$(ECHO) "*** Installing FIPS module"
625	@$(ECHO) "install $(INSTALL_FIPSMODULE) -> $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME)"
626	@cp "$(INSTALL_FIPSMODULE)" $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new
627	@chmod 755 $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new
628	@mv -f $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME).new \
629	$(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME)
630	@$(ECHO) "*** Installing FIPS module configuration"
631	@$(ECHO) "install $(INSTALL_FIPSMODULECONF) -> $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf"
632	@cp $(INSTALL_FIPSMODULECONF) $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf
633
634	uninstall_fips:
635	@$(ECHO) "*** Uninstalling FIPS module configuration"
636	$(RM) $(DESTDIR)$(OPENSSLDIR)/fipsmodule.cnf
637	@$(ECHO) "*** Uninstalling FIPS module"
638	$(RM) $(DESTDIR)$(MODULESDIR)/$(FIPSMODULENAME)
639	{- if ($disabled{fips}) { output_on(); } else { output_off(); } "" -}
640	install_fips:
641	@$(ECHO) "The 'install_fips' target requires the 'enable-fips' option"
642
643	uninstall_fips:
644	@$(ECHO) "The 'uninstall_fips' target requires the 'enable-fips' option"
645	{- output_on() if !$disabled{fips}; "" -}
646
647
648	install_ssldirs:
649	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/certs
650	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/private
651	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(OPENSSLDIR)/misc
652	@set -e; for x in dummy $(MISC_SCRIPTS); do \
653	if [ "$$x" = "dummy" ]; then continue; fi; \
654	x1=`echo "$$x" \| cut -f1 -d:`; \
655	x2=`echo "$$x" \| cut -f2 -d:`; \
656	fn=`basename $$x1`; \
657	$(ECHO) "install $$x1 -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
658	cp $$x1 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
659	chmod 755 $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new; \
660	mv -f $(DESTDIR)$(OPENSSLDIR)/misc/$$fn.new \
661	$(DESTDIR)$(OPENSSLDIR)/misc/$$fn; \
662	if [ "$$x1" != "$$x2" ]; then \
663	ln=`basename "$$x2"`; \
664	: {- output_off() unless windowsdll(); "" -}; \
665	$(ECHO) "copy $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
666	cp $(DESTDIR)$(OPENSSLDIR)/misc/$$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \
667	: {- output_on() unless windowsdll();
668	output_off() if windowsdll(); "" -}; \
669	$(ECHO) "link $(DESTDIR)$(OPENSSLDIR)/misc/$$ln -> $(DESTDIR)$(OPENSSLDIR)/misc/$$fn"; \
670	ln -sf $$fn $(DESTDIR)$(OPENSSLDIR)/misc/$$ln; \
671	: {- output_on() if windowsdll(); "" -}; \
672	fi; \
673	done
674	@$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist"
675	@cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
676	@chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new
677	@mv -f $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.new $(DESTDIR)$(OPENSSLDIR)/openssl.cnf.dist
678	@if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/openssl.cnf" ]; then \
679	$(ECHO) "install $(SRCDIR)/apps/openssl.cnf -> $(DESTDIR)$(OPENSSLDIR)/openssl.cnf"; \
680	cp $(SRCDIR)/apps/openssl.cnf $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \
681	chmod 644 $(DESTDIR)$(OPENSSLDIR)/openssl.cnf; \
682	fi
683	@$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist"
684	@cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new
685	@chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new
686	@mv -f $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.new $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf.dist
687	@if [ ! -f "$(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf" ]; then \
688	$(ECHO) "install $(SRCDIR)/apps/ct_log_list.cnf -> $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf"; \
689	cp $(SRCDIR)/apps/ct_log_list.cnf $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \
690	chmod 644 $(DESTDIR)$(OPENSSLDIR)/ct_log_list.cnf; \
691	fi
692
693	install_dev: install_runtime_libs
694	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
695	@$(ECHO) "*** Installing development files"
696	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/include/openssl
697	@ : {- output_off() if $disabled{uplink}; "" -}
698	@$(ECHO) "install $(SRCDIR)/ms/applink.c -> $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c"
699	@cp $(SRCDIR)/ms/applink.c $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
700	@chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
701	@ : {- output_on() if $disabled{uplink}; "" -}
702	@set -e; for i in $(SRCDIR)/include/openssl/*.h \
703	$(BLDDIR)/include/openssl/*.h; do \
704	fn=`basename $$i`; \
705	$(ECHO) "install $$i -> $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
706	cp $$i $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
707	chmod 644 $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
708	done
709	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)
710	@set -e; for l in $(INSTALL_LIBS); do \
711	fn=`basename $$l`; \
712	$(ECHO) "install $$l -> $(DESTDIR)$(libdir)/$$fn"; \
713	cp $$l $(DESTDIR)$(libdir)/$$fn.new; \
714	$(RANLIB) $(DESTDIR)$(libdir)/$$fn.new; \
715	chmod 644 $(DESTDIR)$(libdir)/$$fn.new; \
716	mv -f $(DESTDIR)$(libdir)/$$fn.new \
717	$(DESTDIR)$(libdir)/$$fn; \
718	done
719	@ : {- output_off() if $disabled{shared}; "" -}
720	@set -e; for s in $(INSTALL_SHLIB_INFO); do \
721	s1=`echo "$$s" \| cut -f1 -d";"`; \
722	s2=`echo "$$s" \| cut -f2 -d";"`; \
723	s3=`echo "$$s" \| cut -f3 -d";"`; \
724	fn1=`basename "$$s1"`; \
725	fn2=`basename "$$s2"`; \
726	fn3=`basename "$$s3"`; \
727	: {- output_off(); output_on() unless windowsdll() or sharedaix(); "" -}; \
728	if [ "$$fn2" != "" ]; then \
729	$(ECHO) "link $(DESTDIR)$(libdir)/$$fn2 -> $(DESTDIR)$(libdir)/$$fn1"; \
730	ln -sf $$fn1 $(DESTDIR)$(libdir)/$$fn2; \
731	fi; \
732	: {- output_off() unless windowsdll() or sharedaix(); output_on() if windowsdll(); "" -}; \
733	if [ "$$fn3" != "" ]; then \
734	$(ECHO) "install $$s3 -> $(DESTDIR)$(libdir)/$$fn3"; \
735	cp $$s3 $(DESTDIR)$(libdir)/$$fn3.new; \
736	chmod 755 $(DESTDIR)$(libdir)/$$fn3.new; \
737	mv -f $(DESTDIR)$(libdir)/$$fn3.new \
738	$(DESTDIR)$(libdir)/$$fn3; \
739	fi; \
740	: {- output_off() if windowsdll(); output_on() if sharedaix(); "" -}; \
741	a=$(DESTDIR)$(libdir)/$$fn2; \
742	$(ECHO) "install $$s1 -> $$a"; \
743	if [ -f $$a ]; then ( trap "rm -rf /tmp/ar.$$$$" INT 0; \
744	mkdir /tmp/ar.$$$$; ( cd /tmp/ar.$$$$; \
745	cp -f $$a $$a.new; \
746	for so in `$(AR) t $$a`; do \
747	$(AR) x $$a $$so; \
748	chmod u+w $$so; \
749	strip -X32_64 -e $$so; \
750	$(AR) r $$a.new $$so; \
751	done; \
752	)); fi; \
753	$(AR) r $$a.new $$s1; \
754	mv -f $$a.new $$a; \
755	: {- output_off() if sharedaix(); output_on(); "" -}; \
756	done
757	@ : {- output_on() if $disabled{shared}; "" -}
758	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)/pkgconfig
759	@$(ECHO) "install libcrypto.pc -> $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc"
760	@cp libcrypto.pc $(DESTDIR)$(libdir)/pkgconfig
761	@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc
762	@$(ECHO) "install libssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/libssl.pc"
763	@cp libssl.pc $(DESTDIR)$(libdir)/pkgconfig
764	@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/libssl.pc
765	@$(ECHO) "install openssl.pc -> $(DESTDIR)$(libdir)/pkgconfig/openssl.pc"
766	@cp openssl.pc $(DESTDIR)$(libdir)/pkgconfig
767	@chmod 644 $(DESTDIR)$(libdir)/pkgconfig/openssl.pc
768
769	uninstall_dev: uninstall_runtime_libs
770	@$(ECHO) "*** Uninstalling development files"
771	@ : {- output_off() if $disabled{uplink}; "" -}
772	@$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c"
773	@$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/applink.c
774	@ : {- output_on() if $disabled{uplink}; "" -}
775	@set -e; for i in $(SRCDIR)/include/openssl/*.h \
776	$(BLDDIR)/include/openssl/*.h; do \
777	fn=`basename $$i`; \
778	$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn"; \
779	$(RM) $(DESTDIR)$(INSTALLTOP)/include/openssl/$$fn; \
780	done
781	-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include/openssl
782	-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/include
783	@set -e; for l in $(INSTALL_LIBS); do \
784	fn=`basename $$l`; \
785	$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn"; \
786	$(RM) $(DESTDIR)$(libdir)/$$fn; \
787	done
788	@ : {- output_off() if $disabled{shared}; "" -}
789	@set -e; for s in $(INSTALL_SHLIB_INFO); do \
790	s1=`echo "$$s" \| cut -f1 -d";"`; \
791	s2=`echo "$$s" \| cut -f2 -d";"`; \
792	s3=`echo "$$s" \| cut -f3 -d";"`; \
793	fn1=`basename "$$s1"`; \
794	fn2=`basename "$$s2"`; \
795	fn3=`basename "$$s3"`; \
796	: {- output_off() if windowsdll(); "" -}; \
797	$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn1"; \
798	$(RM) $(DESTDIR)$(libdir)/$$fn1; \
799	if [ -n "$$fn2" ]; then \
800	$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn2"; \
801	$(RM) $(DESTDIR)$(libdir)/$$fn2; \
802	fi; \
803	: {- output_on() if windowsdll(); "" -}{- output_off() unless windowsdll(); "" -}; \
804	if [ -n "$$fn3" ]; then \
805	$(ECHO) "$(RM) $(DESTDIR)$(libdir)/$$fn3"; \
806	$(RM) $(DESTDIR)$(libdir)/$$fn3; \
807	fi; \
808	: {- output_on() unless windowsdll(); "" -}; \
809	done
810	@ : {- output_on() if $disabled{shared}; "" -}
811	$(RM) $(DESTDIR)$(libdir)/pkgconfig/libcrypto.pc
812	$(RM) $(DESTDIR)$(libdir)/pkgconfig/libssl.pc
813	$(RM) $(DESTDIR)$(libdir)/pkgconfig/openssl.pc
814	-$(RMDIR) $(DESTDIR)$(libdir)/pkgconfig
815	-$(RMDIR) $(DESTDIR)$(libdir)
816
817	_install_modules_deps: install_runtime_libs build_modules
818
819	install_engines: _install_modules_deps
820	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
821	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(ENGINESDIR)/
822	@$(ECHO) "*** Installing engines"
823	@set -e; for e in dummy $(INSTALL_ENGINES); do \
824	if [ "$$e" = "dummy" ]; then continue; fi; \
825	fn=`basename $$e`; \
826	$(ECHO) "install $$e -> $(DESTDIR)$(ENGINESDIR)/$$fn"; \
827	cp $$e $(DESTDIR)$(ENGINESDIR)/$$fn.new; \
828	chmod 755 $(DESTDIR)$(ENGINESDIR)/$$fn.new; \
829	mv -f $(DESTDIR)$(ENGINESDIR)/$$fn.new \
830	$(DESTDIR)$(ENGINESDIR)/$$fn; \
831	done
832
833	uninstall_engines:
834	@$(ECHO) "*** Uninstalling engines"
835	@set -e; for e in dummy $(INSTALL_ENGINES); do \
836	if [ "$$e" = "dummy" ]; then continue; fi; \
837	fn=`basename $$e`; \
838	$(ECHO) "$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn"; \
839	$(RM) $(DESTDIR)$(ENGINESDIR)/$$fn; \
840	done
841	-$(RMDIR) $(DESTDIR)$(ENGINESDIR)
842
843	install_modules: _install_modules_deps
844	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
845	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MODULESDIR)/
846	@$(ECHO) "*** Installing modules"
847	@set -e; for e in dummy $(INSTALL_MODULES); do \
848	if [ "$$e" = "dummy" ]; then continue; fi; \
849	fn=`basename $$e`; \
850	$(ECHO) "install $$e -> $(DESTDIR)$(MODULESDIR)/$$fn"; \
851	cp $$e $(DESTDIR)$(MODULESDIR)/$$fn.new; \
852	chmod 755 $(DESTDIR)$(MODULESDIR)/$$fn.new; \
853	mv -f $(DESTDIR)$(MODULESDIR)/$$fn.new \
854	$(DESTDIR)$(MODULESDIR)/$$fn; \
855	done
856
857	uninstall_modules:
858	@$(ECHO) "*** Uninstalling modules"
859	@set -e; for e in dummy $(INSTALL_MODULES); do \
860	if [ "$$e" = "dummy" ]; then continue; fi; \
861	fn=`basename $$e`; \
862	$(ECHO) "$(RM) $(DESTDIR)$(MODULESDIR)/$$fn"; \
863	$(RM) $(DESTDIR)$(MODULESDIR)/$$fn; \
864	done
865	-$(RMDIR) $(DESTDIR)$(MODULESDIR)
866
867	install_runtime: install_programs
868
869	install_runtime_libs: build_libs
870	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
871	@ : {- output_off() if windowsdll(); "" -}
872	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(libdir)
873	@ : {- output_on() if windowsdll(); output_off() unless windowsdll(); "" -}
874	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin
875	@ : {- output_on() unless windowsdll(); "" -}
876	@$(ECHO) "*** Installing runtime libraries"
877	@set -e; for s in dummy $(INSTALL_SHLIBS); do \
878	if [ "$$s" = "dummy" ]; then continue; fi; \
879	fn=`basename $$s`; \
880	: {- output_off() unless windowsdll(); "" -}; \
881	$(ECHO) "install $$s -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
882	cp $$s $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
883	chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
884	mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
885	$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
886	: {- output_on() unless windowsdll(); "" -}{- output_off() if windowsdll(); "" -}; \
887	$(ECHO) "install $$s -> $(DESTDIR)$(libdir)/$$fn"; \
888	cp $$s $(DESTDIR)$(libdir)/$$fn.new; \
889	chmod 755 $(DESTDIR)$(libdir)/$$fn.new; \
890	mv -f $(DESTDIR)$(libdir)/$$fn.new \
891	$(DESTDIR)$(libdir)/$$fn; \
892	: {- output_on() if windowsdll(); "" -}; \
893	done
894
895	install_programs: install_runtime_libs build_programs
896	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
897	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(INSTALLTOP)/bin
898	@$(ECHO) "*** Installing runtime programs"
899	@set -e; for x in dummy $(INSTALL_PROGRAMS); do \
900	if [ "$$x" = "dummy" ]; then continue; fi; \
901	fn=`basename $$x`; \
902	$(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
903	cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
904	chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
905	mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
906	$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
907	done
908	@set -e; for x in dummy $(BIN_SCRIPTS); do \
909	if [ "$$x" = "dummy" ]; then continue; fi; \
910	fn=`basename $$x`; \
911	$(ECHO) "install $$x -> $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
912	cp $$x $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
913	chmod 755 $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new; \
914	mv -f $(DESTDIR)$(INSTALLTOP)/bin/$$fn.new \
915	$(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
916	done
917
918	uninstall_runtime: uninstall_programs uninstall_runtime_libs
919
920	uninstall_programs:
921	@$(ECHO) "*** Uninstalling runtime programs"
922	@set -e; for x in dummy $(INSTALL_PROGRAMS); \
923	do \
924	if [ "$$x" = "dummy" ]; then continue; fi; \
925	fn=`basename $$x`; \
926	$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
927	$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
928	done;
929	@set -e; for x in dummy $(BIN_SCRIPTS); \
930	do \
931	if [ "$$x" = "dummy" ]; then continue; fi; \
932	fn=`basename $$x`; \
933	$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
934	$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
935	done
936	-$(RMDIR) $(DESTDIR)$(INSTALLTOP)/bin
937
938	uninstall_runtime_libs:
939	@$(ECHO) "*** Uninstalling runtime libraries"
940	@ : {- output_off() unless windowsdll(); "" -}
941	@set -e; for s in dummy $(INSTALL_SHLIBS); do \
942	if [ "$$s" = "dummy" ]; then continue; fi; \
943	fn=`basename $$s`; \
944	$(ECHO) "$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn"; \
945	$(RM) $(DESTDIR)$(INSTALLTOP)/bin/$$fn; \
946	done
947	@ : {- output_on() unless windowsdll(); "" -}
948
949
950	install_man_docs: build_man_docs
951	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
952	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man1
953	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man3
954	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man5
955	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(MANDIR)/man7
956	@$(ECHO) "*** Installing manpages"
957	@set -e; for x in dummy $(MANDOCS1); do \
958	if [ "$$x" = "dummy" ]; then continue; fi; \
959	fn=`basename $$x`; \
960	$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \
961	cp $$x $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
962	chmod 644 $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
963	$(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man1 $(BLDDIR)/doc/man1 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man1; \
964	done
965	@set -e; for x in dummy $(MANDOCS3); do \
966	if [ "$$x" = "dummy" ]; then continue; fi; \
967	fn=`basename $$x`; \
968	$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \
969	cp $$x $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
970	chmod 644 $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
971	$(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man3 $(BLDDIR)/doc/man3 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man3; \
972	done
973	@set -e; for x in dummy $(MANDOCS5); do \
974	if [ "$$x" = "dummy" ]; then continue; fi; \
975	fn=`basename $$x`; \
976	$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \
977	cp $$x $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
978	chmod 644 $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
979	$(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man5 $(BLDDIR)/doc/man5 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man5; \
980	done
981	@set -e; for x in dummy $(MANDOCS7); do \
982	if [ "$$x" = "dummy" ]; then continue; fi; \
983	fn=`basename $$x`; \
984	$(ECHO) "install $$x -> $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \
985	cp $$x $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
986	chmod 644 $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
987	$(PERL) $(SRCDIR)/util/write-man-symlinks install $(SRCDIR)/doc/man7 $(BLDDIR)/doc/man7 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man7; \
988	done
989
990	uninstall_man_docs: build_man_docs
991	@$(ECHO) "*** Uninstalling manpages"
992	@set -e; for x in dummy $(MANDOCS1); do \
993	if [ "$$x" = "dummy" ]; then continue; fi; \
994	fn=`basename $$x`; \
995	$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX)"; \
996	$(RM) $(DESTDIR)$(MANDIR)/man1/$${fn}$(MANSUFFIX); \
997	$(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man1 $(BLDDIR)/doc/man1 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man1; \
998	done
999	@set -e; for x in dummy $(MANDOCS3); do \
1000	if [ "$$x" = "dummy" ]; then continue; fi; \
1001	fn=`basename $$x`; \
1002	$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX)"; \
1003	$(RM) $(DESTDIR)$(MANDIR)/man3/$${fn}$(MANSUFFIX); \
1004	$(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man3 $(BLDDIR)/doc/man3 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man3; \
1005	done
1006	@set -e; for x in dummy $(MANDOCS5); do \
1007	if [ "$$x" = "dummy" ]; then continue; fi; \
1008	fn=`basename $$x`; \
1009	$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX)"; \
1010	$(RM) $(DESTDIR)$(MANDIR)/man5/$${fn}$(MANSUFFIX); \
1011	$(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man5 $(BLDDIR)/doc/man5 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man5; \
1012	done
1013	@set -e; for x in dummy $(MANDOCS7); do \
1014	if [ "$$x" = "dummy" ]; then continue; fi; \
1015	fn=`basename $$x`; \
1016	$(ECHO) "$(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX)"; \
1017	$(RM) $(DESTDIR)$(MANDIR)/man7/$${fn}$(MANSUFFIX); \
1018	$(PERL) $(SRCDIR)/util/write-man-symlinks uninstall $(SRCDIR)/doc/man7 $(BLDDIR)/doc/man7 $${fn}$(MANSUFFIX) $(DESTDIR)$(MANDIR)/man7; \
1019	done
1020
1021	install_html_docs: install_image_docs build_html_docs
1022	@[ -n "$(INSTALLTOP)" ] \|\| (echo INSTALLTOP should not be empty; exit 1)
1023	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man1
1024	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man3
1025	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man5
1026	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man7
1027	@$(ECHO) "*** Installing HTML manpages"
1028	@set -e; for x in dummy $(HTMLDOCS1); do \
1029	if [ "$$x" = "dummy" ]; then continue; fi; \
1030	fn=`basename $$x`; \
1031	$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \
1032	cp $$x $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
1033	chmod 644 $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
1034	done
1035	@set -e; for x in dummy $(HTMLDOCS3); do \
1036	if [ "$$x" = "dummy" ]; then continue; fi; \
1037	fn=`basename $$x`; \
1038	$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \
1039	cp $$x $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
1040	chmod 644 $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
1041	done
1042	@set -e; for x in dummy $(HTMLDOCS5); do \
1043	if [ "$$x" = "dummy" ]; then continue; fi; \
1044	fn=`basename $$x`; \
1045	$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \
1046	cp $$x $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
1047	chmod 644 $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
1048	done
1049	@set -e; for x in dummy $(HTMLDOCS7); do \
1050	if [ "$$x" = "dummy" ]; then continue; fi; \
1051	fn=`basename $$x`; \
1052	$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \
1053	cp $$x $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
1054	chmod 644 $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
1055	done
1056
1057	uninstall_html_docs: uninstall_image_docs
1058	@$(ECHO) "*** Uninstalling HTML manpages"
1059	@set -e; for x in dummy $(HTMLDOCS1); do \
1060	if [ "$$x" = "dummy" ]; then continue; fi; \
1061	fn=`basename $$x`; \
1062	$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn"; \
1063	$(RM) $(DESTDIR)$(HTMLDIR)/man1/$$fn; \
1064	done
1065	@set -e; for x in dummy $(HTMLDOCS3); do \
1066	if [ "$$x" = "dummy" ]; then continue; fi; \
1067	fn=`basename $$x`; \
1068	$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn"; \
1069	$(RM) $(DESTDIR)$(HTMLDIR)/man3/$$fn; \
1070	done
1071	@set -e; for x in dummy $(HTMLDOCS5); do \
1072	if [ "$$x" = "dummy" ]; then continue; fi; \
1073	fn=`basename $$x`; \
1074	$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn"; \
1075	$(RM) $(DESTDIR)$(HTMLDIR)/man5/$$fn; \
1076	done
1077	@set -e; for x in dummy $(HTMLDOCS7); do \
1078	if [ "$$x" = "dummy" ]; then continue; fi; \
1079	fn=`basename $$x`; \
1080	$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn"; \
1081	$(RM) $(DESTDIR)$(HTMLDIR)/man7/$$fn; \
1082	done
1083
1084	install_image_docs:
1085	@$(PERL) $(SRCDIR)/util/mkdir-p.pl $(DESTDIR)$(HTMLDIR)/man7/img
1086	@set -e; for x in dummy $(IMAGEDOCS7); do \
1087	if [ "$$x" = "dummy" ]; then continue; fi; \
1088	fn=`basename $$x`; \
1089	$(ECHO) "install $$x -> $(DESTDIR)$(HTMLDIR)/man7/img/$$fn"; \
1090	cp $(SRCDIR)/$$x $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \
1091	chmod 644 $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \
1092	done
1093
1094	uninstall_image_docs:
1095	@set -e; for x in dummy $(IMAGEDOCS7); do \
1096	if [ "$$x" = "dummy" ]; then continue; fi; \
1097	fn=`basename $$x`; \
1098	$(ECHO) "$(RM) $(DESTDIR)$(HTMLDIR)/man7/img/$$fn"; \
1099	$(RM) $(DESTDIR)$(HTMLDIR)/man7/img/$$fn; \
1100	done
1101
1102	# Developer targets (note: these are only available on Unix) #########
1103
1104	# It's important that generate_buildinfo comes after ordinals, as ordinals
1105	# is sensitive to build.info changes.
1106	update: generate errors ordinals generate_buildinfo
1107
1108	generate: generate_apps generate_crypto_bn generate_crypto_objects \
1109	generate_crypto_conf generate_crypto_asn1 generate_fuzz_oids
1110
1111	generate_buildinfo: generate_doc_buildinfo
1112
1113	.PHONY: doc-nits md-nits
1114	doc-nits: build_generated_pods
1115	$(PERL) $(SRCDIR)/util/find-doc-nits -c -n -l -e
1116
1117	# This uses "mdl", the markdownlint application, which is written in ruby.
1118	# The source is at https://github.com/markdownlint/markdownlint
1119	# If you have ruby installed, "gem install mdl" should work.
1120	# Another option is at https://snapcraft.io/install/mdl/debian
1121	# Finally, there's a Node.js version, which we haven't tried, that
1122	# can be found at https://github.com/DavidAnson/markdownlint
1123	md-nits:
1124	mdl -s util/markdownlint.rb .
1125
1126	# Test coverage is a good idea for the future
1127	#coverage: $(PROGRAMS) $(TESTPROGRAMS)
1128	# ...
1129
1130	lint:
1131	lint -DLINT $(INCLUDES) $(SRCS)
1132
1133	generate_apps:
1134	( cd $(SRCDIR); $(PERL) VMS/VMSify-conf.pl \
1135	< apps/openssl.cnf > apps/openssl-vms.cnf )
1136
1137	generate_crypto_bn:
1138	( cd $(SRCDIR); $(PERL) crypto/bn/bn_prime.pl > crypto/bn/bn_prime.h )
1139
1140	generate_crypto_objects:
1141	( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl -n \
1142	crypto/objects/objects.txt \
1143	crypto/objects/obj_mac.num \
1144	> crypto/objects/obj_mac.new && \
1145	mv crypto/objects/obj_mac.new crypto/objects/obj_mac.num )
1146	( cd $(SRCDIR); $(PERL) crypto/objects/objects.pl \
1147	crypto/objects/objects.txt \
1148	crypto/objects/obj_mac.num \
1149	> include/openssl/obj_mac.h )
1150	( cd $(SRCDIR); $(PERL) crypto/objects/obj_dat.pl \
1151	include/openssl/obj_mac.h \
1152	> crypto/objects/obj_dat.h )
1153	( cd $(SRCDIR); $(PERL) crypto/objects/objxref.pl \
1154	crypto/objects/obj_mac.num \
1155	crypto/objects/obj_xref.txt \
1156	> crypto/objects/obj_xref.h )
1157	( cd $(SRCDIR); sed -e '1,8d' crypto/objects/obj_compat.h >> include/openssl/obj_mac.h )
1158
1159	generate_crypto_conf:
1160	( cd $(SRCDIR); $(PERL) crypto/conf/keysets.pl \
1161	> crypto/conf/conf_def.h )
1162
1163	generate_crypto_asn1:
1164	( cd $(SRCDIR); $(PERL) crypto/asn1/charmap.pl \
1165	> crypto/asn1/charmap.h )
1166
1167	generate_fuzz_oids:
1168	( cd $(SRCDIR); $(PERL) fuzz/mkfuzzoids.pl \
1169	crypto/objects/obj_dat.h \
1170	> fuzz/oids.txt )
1171
1172	generate_doc_buildinfo:
1173	( $(PERL) -I$(BLDDIR) -Mconfigdata \
1174	$(SRCDIR)/util/dofile.pl -o Makefile \
1175	$(SRCDIR)/doc/build.info.in \
1176	> $(SRCDIR)/doc/build.info.new; \
1177	if ( test -e $(SRCDIR)/doc/build.info \
1178	&& cmp $(SRCDIR)/doc/build.info.new $(SRCDIR)/doc/build.info \
1179	> /dev/null ); \
1180	then \
1181	rm $(SRCDIR)/doc/build.info.new; \
1182	else \
1183	mv $(SRCDIR)/doc/build.info.new $(SRCDIR)/doc/build.info; \
1184	fi )
1185
1186	generate_fips_sources: providers/fips.module.sources.new
1187	providers/fips.module.sources.new: configdata.pm
1188	rm -rf sources-tmp
1189	mkdir sources-tmp
1190	( \
1191	srcdir=`cd $(SRCDIR); pwd`; \
1192	cd sources-tmp \
1193	&& $$srcdir/Configure --banner=Configured enable-fips -O0 \
1194	&& ./configdata.pm --query 'get_sources("providers/fips")' > sources1 \
1195	&& $(MAKE) -sj 4 build_generated providers/fips.so \
1196	&& find . -name '*.d' \| xargs cat > dep1 \
1197	&& $(MAKE) distclean \
1198	&& $$srcdir/Configure --banner=Configured enable-fips no-asm -O0 \
1199	&& ./configdata.pm --query 'get_sources("providers/fips")' > sources2 \
1200	&& $(MAKE) -sj 4 build_generated providers/fips.so \
1201	&& find . -name '*.d' \| xargs cat > dep2 \
1202	&& cat sources1 sources2 \
1203	\| grep -v ' : \\$$' \| grep -v util/providers.num \
1204	\| sed -e 's/^ //' -e 's/ \\$$//' \
1205	\| sort \| uniq > sources \
1206	&& cat dep1 dep2 \
1207	\| $(PERL) -p -e 's/\\\n//' \
1208	\| sed -e 's/^.: //' -e 's/ */ /g' \
1209	\| fgrep -f sources \
1210	\| tr ' ' '\n' \
1211	\| sort \| uniq > deps.raw \
1212	&& cat deps.raw \
1213	\| xargs ./configdata.pm --query 'get_sources(@ARGV)' \
1214	\| $(PERL) -p -e 's/\\\n//' \
1215	\| sed -e 's/\./\\\./g' -e 's/ : */:/' -e 's/^/s:/' -e 's/$$/:/' \
1216	> deps.sed \
1217	&& cat deps.raw \| sed -f deps.sed > deps \
1218	)
1219	( \
1220	cat sources-tmp/sources sources-tmp/deps \
1221	\| $(PERL) -p -e 's:^ *\Q../\E:: ;' \
1222	-e 's:^\Q$(SRCDIR)/\E:: if "$(SRCDIR)" ne "." ;' \
1223	-e 'my $$x; do { $$x = $$_; s:(^\|/)((?!\Q../\E)[^/]*/)\Q..\E($$\|/):$$1: } while ($$x ne $$_) ;' ; \
1224	cd $(SRCDIR); \
1225	for x in crypto/bn/asm/.pl crypto/bn/asm/.S \
1226	crypto/aes/asm/.pl crypto/aes/asm/.S \
1227	crypto/ec/asm/*.pl \
1228	crypto/modes/asm/*.pl \
1229	crypto/sha/asm/*.pl \
1230	crypto/x86_64cpuid.pl; do \
1231	echo "$$x"; \
1232	done \
1233	) \| sort \| uniq > providers/fips.module.sources.new
1234	rm -rf sources-tmp
1235
1236	# Set to -force to force a rebuild
1237	ERROR_REBUILD=
1238	errors:
1239	( b=`pwd`; set -e; cd $(SRCDIR); \
1240	$(PERL) util/ck_errf.pl -strict -internal; \
1241	$(PERL) -I$$b util/mkerr.pl $(ERROR_REBUILD) -internal )
1242	( b=`pwd`; set -e; cd $(SRCDIR)/engines; \
1243	for E in *.ec ; do \
1244	$(PERL) ../util/ck_errf.pl -strict \
1245	-conf $$E `basename $$E .ec`.c; \
1246	$(PERL) -I$$b ../util/mkerr.pl $(ERROR_REBUILD) -static \
1247	-conf $$E `basename $$E .ec`.c ; \
1248	done )
1249
1250	{- use File::Basename;
1251
1252	my @sslheaders_tmpl =
1253	qw( include/openssl/ssl.h
1254	include/openssl/ssl2.h
1255	include/openssl/ssl3.h
1256	include/openssl/sslerr.h
1257	include/openssl/tls1.h
1258	include/openssl/dtls1.h
1259	include/openssl/srtp.h
1260	include/openssl/sslerr_legacy.h );
1261	my @cryptoheaders_tmpl =
1262	qw( include/internal/dso.h
1263	include/internal/o_dir.h
1264	include/internal/err.h
1265	include/internal/evp.h
1266	include/internal/pem.h
1267	include/internal/asn1.h
1268	include/internal/sslconf.h );
1269	my @cryptoskipheaders = ( @sslheaders_tmpl,
1270	qw( include/openssl/conf_api.h
1271	include/openssl/ebcdic.h
1272	include/openssl/opensslconf.h
1273	include/openssl/symhacks.h ) );
1274	our %cryptoheaders = ();
1275	our %sslheaders = ();
1276	foreach my $d ( qw( include/openssl include/internal ) ) {
1277	my @header_patterns =
1278	map { catfile($config{sourcedir}, $d, $_) } ( '.h', '.h.in' );
1279	foreach my $f ( map { glob($_) } @header_patterns ) {
1280	my $base = basename($f);
1281	my $base_in = basename($f, '.in');
1282	my $dir = catfile($config{sourcedir}, $d);
1283	if ($base ne $base_in) {
1284	# We have a .h.in file, which means the header file is in the
1285	# build tree.
1286	$base = $base_in;
1287	$dir = catfile($config{builddir}, $d);
1288	}
1289	my $new_f = catfile($dir, $base);
1290	my $fn = "$d/$base";
1291	# The logic to add files to @cryptoheaders is a bit complex. The
1292	# file to be added must be either in the public header directory
1293	# or one of the pre-declared internal headers, and must under no
1294	# circumstances be one of those that must be skipped.
1295	$cryptoheaders{$new_f} = 1
1296	if (($d eq 'include/openssl'
1297	\|\| ( grep { $_ eq $fn } @cryptoheaders_tmpl ))
1298	&& !( grep { $_ eq $fn } @cryptoskipheaders ));
1299	# The logic to add files to @sslheaders is much simpler...
1300	$sslheaders{$new_f} = 1 if grep { $_ eq $fn } @sslheaders_tmpl;
1301	}
1302	}
1303	"";
1304	-}
1305	CRYPTOHEADERS={- join(" \\\n" . ' ' x 14,
1306	fill_lines(" ", $COLUMNS - 14, sort keys %cryptoheaders)) -}
1307	SSLHEADERS={- join(" \\\n" . ' ' x 11,
1308	fill_lines(" ", $COLUMNS - 11, sort keys %sslheaders)) -}
1309
1310	renumber: build_generated
1311	$(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \
1312	--ordinals $(SRCDIR)/util/libcrypto.num \
1313	--symhacks $(SRCDIR)/include/openssl/symhacks.h \
1314	--renumber \
1315	$(CRYPTOHEADERS)
1316	$(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \
1317	--ordinals $(SRCDIR)/util/libssl.num \
1318	--symhacks $(SRCDIR)/include/openssl/symhacks.h \
1319	--renumber \
1320	$(SSLHEADERS)
1321
1322	ordinals: build_generated
1323	$(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \
1324	--ordinals $(SRCDIR)/util/libcrypto.num \
1325	--symhacks $(SRCDIR)/include/openssl/symhacks.h \
1326	$(CRYPTOHEADERS)
1327	$(PERL) $(SRCDIR)/util/mknum.pl --version $(VERSION_NUMBER) --no-warnings \
1328	--ordinals $(SRCDIR)/util/libssl.num \
1329	--symhacks $(SRCDIR)/include/openssl/symhacks.h \
1330	$(SSLHEADERS)
1331
1332	test_ordinals:
1333	$(MAKE) run_tests TESTS=test_ordinals
1334
1335	tags TAGS: FORCE
1336	rm -f TAGS tags
1337	-ctags -R .
1338	-etags `find . -name '.[ch]' -o -name '.pm'`
1339
1340	providers/fips.checksum.new: providers/fips.module.sources.new
1341	@which unifdef > /dev/null \|\| \
1342	( echo >&2 "ERROR: unifdef not in your \$$PATH, FIPS checksums not calculated"; \
1343	false )
1344	( sources=`pwd`/providers/fips.module.sources.new; \
1345	cd $(SRCDIR) \
1346	&& cat $$sources \
1347	\| xargs ./util/fips-checksums.sh ) \
1348	> providers/fips-sources.checksums.new \
1349	&& sha256sum providers/fips-sources.checksums.new \
1350	\| sed -e 's\|\.new\|\|' > providers/fips.checksum.new
1351
1352	fips-checksums: providers/fips.checksum.new
1353
1354	$(SRCDIR)/providers/fips.checksum: providers/fips.checksum.new
1355	cp -p providers/fips.module.sources.new $(SRCDIR)/providers/fips.module.sources
1356	cp -p providers/fips-sources.checksums.new $(SRCDIR)/providers/fips-sources.checksums
1357	cp -p providers/fips.checksum.new $(SRCDIR)/providers/fips.checksum
1358
1359	update-fips-checksums: $(SRCDIR)/providers/fips.checksum
1360
1361	diff-fips-checksums: fips-checksums
1362	diff -u $(SRCDIR)/providers/fips.module.sources providers/fips.module.sources.new
1363	diff -u $(SRCDIR)/providers/fips-sources.checksums providers/fips-sources.checksums.new
1364	diff -u $(SRCDIR)/providers/fips.checksum providers/fips.checksum.new
1365
1366	# Release targets (note: only available on Unix) #####################
1367
1368	tar:
1369	(cd $(SRCDIR); ./util/mktar.sh --name='$(NAME)' --tarfile='$(TARFILE)')
1370
1371	# Helper targets #####################################################
1372
1373	link-utils: $(BLDDIR)/util/opensslwrap.sh $(BLDDIR)/apps/openssl.cnf
1374
1375	$(BLDDIR)/util/opensslwrap.sh: Makefile
1376	@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
1377	mkdir -p "$(BLDDIR)/util"; \
1378	ln -sf "../$(SRCDIR)/util/`basename "$@"`" "$(BLDDIR)/util"; \
1379	fi
1380
1381	$(BLDDIR)/apps/openssl.cnf: Makefile
1382	@if [ "$(SRCDIR)" != "$(BLDDIR)" ]; then \
1383	mkdir -p "$(BLDDIR)/apps"; \
1384	ln -sf "../$(SRCDIR)/apps/`basename "$@"`" "$(BLDDIR)/apps"; \
1385	fi
1386
1387	FORCE:
1388
1389	# Building targets ###################################################
1390
1391	libcrypto.pc libssl.pc openssl.pc: Makefile $(LIBS) {- join(" ",map { platform->sharedlib_simple($_) // platform->sharedlib_import($_) // platform->sharedlib($_) // () } @{$unified_info{libraries}}) -}
1392
1393	libcrypto.pc:
1394	@ ( echo 'prefix=$(INSTALLTOP)'; \
1395	echo 'exec_prefix=$${prefix}'; \
1396	if [ -n "$(LIBDIR)" ]; then \
1397	echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
1398	else \
1399	echo 'libdir=$(libdir)'; \
1400	fi; \
1401	echo 'includedir=$${prefix}/include'; \
1402	echo 'enginesdir=$${libdir}/engines-{- $sover_dirname -}'; \
1403	echo 'modulesdir=$${libdir}/ossl-modules'; \
1404	echo ''; \
1405	echo 'Name: OpenSSL-libcrypto'; \
1406	echo 'Description: OpenSSL cryptography library'; \
1407	echo 'Version: '$(VERSION); \
1408	echo 'Libs: -L$${libdir} -lcrypto'; \
1409	echo 'Libs.private: $(LIB_EX_LIBS)'; \
1410	echo 'Cflags: -I$${includedir}' ) > libcrypto.pc
1411
1412	libssl.pc:
1413	@ ( echo 'prefix=$(INSTALLTOP)'; \
1414	echo 'exec_prefix=$${prefix}'; \
1415	if [ -n "$(LIBDIR)" ]; then \
1416	echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
1417	else \
1418	echo 'libdir=$(libdir)'; \
1419	fi; \
1420	echo 'includedir=$${prefix}/include'; \
1421	echo ''; \
1422	echo 'Name: OpenSSL-libssl'; \
1423	echo 'Description: Secure Sockets Layer and cryptography libraries'; \
1424	echo 'Version: '$(VERSION); \
1425	echo 'Requires.private: libcrypto'; \
1426	echo 'Libs: -L$${libdir} -lssl'; \
1427	echo 'Cflags: -I$${includedir}' ) > libssl.pc
1428
1429	openssl.pc:
1430	@ ( echo 'prefix=$(INSTALLTOP)'; \
1431	echo 'exec_prefix=$${prefix}'; \
1432	if [ -n "$(LIBDIR)" ]; then \
1433	echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
1434	else \
1435	echo 'libdir=$(libdir)'; \
1436	fi; \
1437	echo 'includedir=$${prefix}/include'; \
1438	echo ''; \
1439	echo 'Name: OpenSSL'; \
1440	echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
1441	echo 'Version: '$(VERSION); \
1442	echo 'Requires: libssl libcrypto' ) > openssl.pc
1443
1444	Makefile: configdata.pm \
1445	{- join(" \\\n" . ' ' x 10,
1446	fill_lines(" ", $COLUMNS - 10,
1447	@{$config{build_file_templates}})) -}
1448	@echo "Detected changed: $?"
1449	$(PERL) configdata.pm
1450	@echo "**************************************************"
1451	@echo "* *"
1452	@echo "* Please run the same make command again *"
1453	@echo "* *"
1454	@echo "**************************************************"
1455	@false
1456
1457	configdata.pm: $(SRCDIR)/Configure $(SRCDIR)/config \
1458	{- join(" \\\n" . ' ' x 15,
1459	fill_lines(" ", $COLUMNS - 15,
1460	@{$config{build_infos}},
1461	@{$config{conf_files}})) -}
1462	@echo "Detected changed: $?"
1463	$(PERL) configdata.pm -r
1464	@echo "**************************************************"
1465	@echo "* *"
1466	@echo "* Please run the same make command again *"
1467	@echo "* *"
1468	@echo "**************************************************"
1469	@false
1470
1471	reconfigure reconf:
1472	$(PERL) configdata.pm -r
1473
1474	{-
1475	use File::Basename;
1476	use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
1477
1478	# Helper function to convert dependencies in platform agnostic form to
1479	# dependencies in platform form.
1480	sub compute_platform_depends {
1481	map { my $x = $_;
1482
1483	grep { $x eq $_ } @{$unified_info{programs}} and platform->bin($x)
1484	or grep { $x eq $_ } @{$unified_info{modules}} and platform->dso($x)
1485	or grep { $x eq $_ } @{$unified_info{libraries}} and platform->lib($x)
1486	or platform->convertext($x); } @_;
1487	}
1488
1489	# Helper function to figure out dependencies on libraries
1490	# It takes a list of library names and outputs a list of dependencies
1491	sub compute_lib_depends {
1492	# Depending on shared libraries:
1493	# On Windows POSIX layers, we depend on {libname}.dll.a
1494	# On Unix platforms, we depend on {shlibname}.so
1495	return map { platform->sharedlib_simple($_)
1496	// platform->sharedlib_import($_)
1497	// platform->sharedlib($_)
1498	// platform->staticlib($_)
1499	} @_;
1500	}
1501
1502	sub generatetarget {
1503	my %args = @_;
1504	my $deps = join(" ", compute_platform_depends(@{$args{deps}}));
1505	return <<"EOF";
1506	$args{target}: $deps
1507	EOF
1508	}
1509
1510	sub generatesrc {
1511	my %args = @_;
1512	my $gen0 = $args{generator}->[0];
1513	my $gen_args = join('', map { " $_" }
1514	@{$args{generator}}[1..$#{$args{generator}}]);
1515	my $gen_incs = join("", map { " -I".$_ } @{$args{generator_incs}});
1516	my $incs = join("", map { " -I".$_ } @{$args{incs}});
1517	my $defs = join("", map { " -D".$_ } @{$args{defs}});
1518	my $deps = join(" ", compute_platform_depends(@{$args{generator_deps}},
1519	@{$args{deps}}));
1520
1521	if ($args{src} =~ /\.html$/) {
1522	#
1523	# HTML generator
1524	#
1525	my $title = basename($args{src}, ".html");
1526	my $pod = $gen0;
1527	return <<"EOF";
1528	$args{src}: $pod
1529	\$(PERL) \$(SRCDIR)/util/mkpod2html.pl -i "$pod" -o \$\@ -t "$title" -r "\$(SRCDIR)/doc"
1530	EOF
1531	} elsif ($args{src} =~ /\.(\d)$/) {
1532	#
1533	# Man-page generator
1534	#
1535	my $section = $1;
1536	my $name = uc basename($args{src}, ".$section");
1537	my $pod = $gen0;
1538	return <<"EOF";
1539	$args{src}: $pod
1540	pod2man --name=$name --section=$section\$(MANSUFFIX) --center=OpenSSL \\
1541	--release=\$(VERSION) $pod >\$\@
1542	EOF
1543	} elsif (platform->isdef($args{src})) {
1544	#
1545	# Linker script-ish generator
1546	#
1547	my $target = platform->def($args{src});
1548	(my $mkdef_os = $target{shared_target}) =~ s\|-shared$\|\|;
1549	my $ord_ver = $args{intent} eq 'lib' ? ' --version $(VERSION_NUMBER)' : '';
1550	my $ord_name = $args{generator}->[1] \|\| $args{product};
1551	return <<"EOF";
1552	$target: $gen0 $deps \$(SRCDIR)/util/mkdef.pl
1553	\$(PERL) \$(SRCDIR)/util/mkdef.pl$ord_ver --type $args{intent} --ordinals $gen0 --name $ord_name --OS $mkdef_os > $target
1554	EOF
1555	} elsif (platform->isasm($args{src})
1556	\|\| platform->iscppasm($args{src})) {
1557	#
1558	# Assembler generator
1559	#
1560	my $cppflags = {
1561	shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
1562	lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
1563	dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
1564	bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
1565	} -> {$args{intent}};
1566
1567	my $generator;
1568	if ($gen0 =~ /\.pl$/) {
1569	$generator = 'CC="$(CC)" $(PERL)'.$gen_incs.' '.$gen0.$gen_args
1570	.' "$(PERLASM_SCHEME)"'.$incs.' '.$cppflags.$defs.' $(PROCESSOR)';
1571	} elsif ($gen0 =~ /\.m4$/) {
1572	$generator = 'm4 -B 8192'.$gen_incs.' '.$gen0.$gen_args.' >'
1573	} elsif ($gen0 =~ /\.S$/) {
1574	$generator = undef;
1575	} else {
1576	die "Generator type for $args{src} unknown: $gen0\n";
1577	}
1578
1579	if (defined($generator)) {
1580	return <<"EOF";
1581	$args{src}: $gen0 $deps
1582	$generator \$@
1583	EOF
1584	}
1585	return <<"EOF";
1586	$args{src}: $gen0 $deps
1587	\$(CC) $incs $cppflags $defs -E $gen0 \| \\
1588	\$(PERL) -ne '/^#(line)?\\s*[0-9]+/ or print' > \$@
1589	EOF
1590	} elsif ($gen0 =~ m\|^.*\.in$\|) {
1591	#
1592	# "dofile" generator (file.in -> file)
1593	#
1594	my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
1595	"util", "dofile.pl")),
1596	rel2abs($config{builddir}));
1597	my @perlmodules = ( 'configdata.pm',
1598	grep { $_ =~ m\|\.pm$\| } @{$args{deps}} );
1599	my %perlmoduleincs = map { '"-I'.dirname($_).'"' => 1 } @perlmodules;
1600	$deps = join(' ', $deps, compute_platform_depends(@perlmodules));
1601	@perlmodules = map { "-M".basename($_, '.pm') } @perlmodules;
1602	my $perlmodules = join(' ', '', sort keys %perlmoduleincs, @perlmodules);
1603	return <<"EOF";
1604	$args{src}: $gen0 $deps
1605	\$(PERL)$perlmodules "$dofile" "-o$target{build_file}" $gen0$gen_args > \$@
1606	EOF
1607	} elsif (grep { $_ eq $gen0 } @{$unified_info{programs}}) {
1608	#
1609	# Generic generator using OpenSSL programs
1610	#
1611
1612	# Redo $gen0, to ensure that we have the proper extension where
1613	# necessary.
1614	$gen0 = platform->bin($gen0);
1615	# Use $(PERL) to execute wrap.pl directly to avoid calling env
1616	return <<"EOF";
1617	$args{src}: $gen0 $deps \$(BLDDIR)/util/wrap.pl
1618	\$(PERL) \$(BLDDIR)/util/wrap.pl $gen0$gen_args > \$@
1619	EOF
1620	} else {
1621	#
1622	# Generic generator using Perl
1623	#
1624	return <<"EOF";
1625	$args{src}: $gen0 $deps
1626	\$(PERL)$gen_incs $gen0$gen_args > \$@
1627	EOF
1628	}
1629	}
1630
1631	# Should one wonder about the end of the Perl snippet, it's because this
1632	# second regexp eats up line endings as well, if the removed path is the
1633	# last in the line. We may therefore need to put back a line ending.
1634	sub src2obj {
1635	my %args = @_;
1636	my $obj = platform->convertext($args{obj});
1637	my $dep = platform->dep($args{obj});
1638	my @srcs = @{$args{srcs}};
1639	my $srcs = join(" ", @srcs);
1640	my $deps = join(" ", @srcs, @{$args{deps}});
1641	my $incs = join("", map { " -I".$_ } @{$args{incs}});
1642	my $defs = join("", map { " -D".$_ } @{$args{defs}});
1643	my $cmd;
1644	my $cmdflags;
1645	my $cmdcompile;
1646	if (grep /\.rc$/, @srcs) {
1647	$cmd = '$(RC)';
1648	$cmdflags = '$(RCFLAGS)';
1649	$cmdcompile = '';
1650	} elsif (grep /\.(cc\|cpp)$/, @srcs) {
1651	$cmd = '$(CXX)';
1652	$cmdcompile = ' -c';
1653	$cmdflags = {
1654	shlib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)',
1655	lib => '$(LIB_CXXFLAGS) $(LIB_CPPFLAGS)',
1656	dso => '$(DSO_CXXFLAGS) $(DSO_CPPFLAGS)',
1657	bin => '$(BIN_CXXFLAGS) $(BIN_CPPFLAGS)'
1658	} -> {$args{intent}};
1659	} else {
1660	$cmd = '$(CC)';
1661	$cmdcompile = ' -c';
1662	$cmdflags = {
1663	shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
1664	lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
1665	dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
1666	bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
1667	} -> {$args{intent}};
1668	}
1669	my $recipe;
1670	# extension-specific rules
1671	if (grep /\.s$/, @srcs) {
1672	$recipe .= <<"EOF";
1673	$obj: $deps
1674	$cmd $cmdflags -c -o \$\@ $srcs
1675	EOF
1676	} elsif (grep /\.S$/, @srcs) {
1677	# Originally there was multi-step rule with $(CC) -E file.S
1678	# followed by $(CC) -c file.s. It compensated for one of
1679	# legacy platform compiler's inability to handle .S files.
1680	# The platform is long discontinued by vendor so there is
1681	# hardly a point to drag it along...
1682	$recipe .= <<"EOF";
1683	$obj: $deps
1684	$cmd $incs $defs $cmdflags -c -o \$\@ $srcs
1685	EOF
1686	} elsif ($makedep_scheme eq 'gcc' && !grep /\.rc$/, @srcs) {
1687	$recipe .= <<"EOF";
1688	$obj: $deps
1689	$cmd $incs $defs $cmdflags -MMD -MF $dep.tmp -MT \$\@ -c -o \$\@ $srcs
1690	\@touch $dep.tmp
1691	\@if cmp $dep.tmp $dep > /dev/null 2> /dev/null; then \\
1692	rm -f $dep.tmp; \\
1693	else \\
1694	mv $dep.tmp $dep; \\
1695	fi
1696	EOF
1697	} else {
1698	$recipe .= <<"EOF";
1699	$obj: $deps
1700	$cmd $incs $defs $cmdflags $cmdcompile -o \$\@ $srcs
1701	EOF
1702	if ($makedep_scheme eq 'makedepend') {
1703	$recipe .= <<"EOF";
1704	\$(MAKEDEPEND) -f- -Y -- $incs $cmdflags -- $srcs 2>/dev/null \\
1705	> $dep
1706	EOF
1707	}
1708	}
1709	return $recipe;
1710	}
1711	# We know this routine is only called when we've configure 'shared'.
1712	sub obj2shlib {
1713	my %args = @_;
1714	my @linkdirs = ();
1715	my @linklibs = ();
1716	foreach (@{$args{deps}}) {
1717	if (platform->isstaticlib($_)) {
1718	push @linklibs, platform->convertext($_);
1719	} else {
1720	my $d = "-L" . dirname($_);
1721	my $l = basename($_);
1722	$l =~ s/^lib//;
1723	$l = "-l" . $l;
1724	push @linklibs, $l;
1725	push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
1726	}
1727	}
1728	my $linkflags = join("", map { $_." " } @linkdirs);
1729	my $linklibs = join("", map { $_." " } @linklibs);
1730	my @objs = map { platform->convertext($_) }
1731	grep { !platform->isdef($_) }
1732	@{$args{objs}};
1733	my @defs = map { platform->def($_) }
1734	grep { platform->isdef($_) }
1735	@{$args{objs}};
1736	my @deps = compute_lib_depends(@{$args{deps}});
1737	die "More than one exported symbol map" if scalar @defs > 1;
1738
1739	my $full = platform->sharedlib($args{lib});
1740	# $import is for Windows and subsystems thereof, where static import
1741	# libraries for DLLs are a thing. On platforms that have this mechanism,
1742	# $import has the name of this import library. On platforms that don't
1743	# have this mechanism, $import will be \|undef\|.
1744	my $import = platform->sharedlib_import($args{lib});
1745	# $simple is for platforms where full shared library names include the
1746	# shared library version, and there's a simpler name that doesn't include
1747	# that version. On such platforms, $simple has the simpler name. On
1748	# other platforms, it will be \|undef\|.
1749	my $simple = platform->sharedlib_simple($args{lib});
1750
1751	my $argfile = defined $target{shared_argfileflag} ? $full.".args" : undef;
1752	my $shared_soname = "";
1753	$shared_soname .= ' '.$target{shared_sonameflag}.basename($full)
1754	if defined $target{shared_sonameflag};
1755	my $shared_imp = "";
1756	$shared_imp .= ' '.$target{shared_impflag}.basename($import)
1757	if defined $target{shared_impflag} && defined $import;
1758	my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs);
1759
1760	# There is at least one platform where the compiler-as-linker needs to
1761	# have one object file directly on the command line. That won't hurt
1762	# any other platform, so we do that for everyone when there's an argfile
1763	# to be had. This depends heavily on splice, which removes elements from
1764	# the given array, and returns them so they can be captured.
1765	my @argfileobjs = $argfile
1766	? splice(@objs, 1)
1767	: ();
1768	my $argfilecmds = $argfile
1769	? join("\n\t", map { "echo $_ >> $argfile" } @argfileobjs)
1770	: undef;
1771	my $argfiledeps = $argfile
1772	? join(" \\\n" . ' ' x (length($argfile) + 2),
1773	fill_lines(' ', $COLUMNS - length($full) - 2, @argfileobjs))
1774	: undef;
1775	my @fulldeps = (@objs, ($argfile ? $argfile : ()), @defs, @deps);
1776	my @fullobjs = (
1777	@objs,
1778	($argfile ? $target{shared_argfileflag}.$argfile : ())
1779	);
1780	my $fulldeps =
1781	join(" \\\n" . ' ' x (length($full) + 2),
1782	fill_lines(' ', $COLUMNS - length($full) - 2, @fulldeps));
1783	my $fullobjs =
1784	join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @fullobjs));
1785
1786	my $recipe = '';
1787
1788	if (defined $simple && $simple ne $full) {
1789	if (sharedaix()) {
1790	$recipe .= <<"EOF";
1791	$simple: $full
1792	rm -f $simple && \\
1793	\$(AR) r $simple $full
1794	EOF
1795	} else {
1796	$recipe .= <<"EOF";
1797	$simple: $full
1798	rm -f $simple && \\
1799	ln -s $full $simple
1800	EOF
1801	}
1802	}
1803	if (defined $import) {
1804	$recipe .= <<"EOF";
1805	$import: $full
1806	EOF
1807	}
1808	$recipe .= <<"EOF";
1809	$full: $fulldeps
1810	\$(CC) \$(LIB_CFLAGS) $linkflags\$(LIB_LDFLAGS)$shared_soname$shared_imp \\
1811	-o $full$shared_def \\
1812	$fullobjs \\
1813	$linklibs \$(LIB_EX_LIBS)
1814	EOF
1815	if (windowsdll()) {
1816	$recipe .= <<"EOF";
1817	rm -f apps/$full
1818	rm -f fuzz/$full
1819	cp -p $full apps/
1820	cp -p $full fuzz/
1821	EOF
1822	if (!$disabled{tests}) {
1823	$recipe .= <<"EOF";
1824	rm -f test/$full
1825	cp -p $full test/
1826	EOF
1827	}
1828	}
1829	$recipe .= <<"EOF" if defined $argfile;
1830	$argfile: $argfiledeps
1831	\$(RM) $argfile
1832	$argfilecmds
1833	EOF
1834	return $recipe;
1835	}
1836	sub obj2dso {
1837	my %args = @_;
1838	my $dso = platform->dso($args{module});
1839	my @linkdirs = ();
1840	my @linklibs = ();
1841	foreach (@{$args{deps}}) {
1842	next unless defined $_;
1843	if (platform->isstaticlib($_)) {
1844	push @linklibs, platform->convertext($_);
1845	} else {
1846	my $d = "-L" . dirname($_);
1847	my $l = basename($_);
1848	$l =~ s/^lib//;
1849	$l = "-l" . $l;
1850	push @linklibs, $l;
1851	push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
1852	}
1853	}
1854	my $linkflags = join("", map { $_." " } @linkdirs);
1855	my $linklibs = join("", map { $_." " } @linklibs);
1856	my @objs = map { platform->convertext($_) }
1857	grep { !platform->isdef($_) }
1858	@{$args{objs}};
1859	my @defs = map { platform->def($_) }
1860	grep { platform->isdef($_) }
1861	@{$args{objs}};
1862	my @deps = compute_lib_depends(@{$args{deps}});
1863	my $shared_def = join("", map { ' '.$target{shared_defflag}.$_ } @defs);
1864	# Next line needs to become "less magic" (see PR #11950)
1865	$shared_def .= ' '.$target{shared_fipsflag} if (defined $target{shared_fipsflag} && $shared_def =~ m/providers\/fips/);
1866	my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs));
1867	my $deps = join(" \\\n" . ' ' x (length($dso) + 2),
1868	fill_lines(' ', $COLUMNS - length($dso) - 2,
1869	@objs, @defs, @deps));
1870
1871	return <<"EOF";
1872	$dso: $deps
1873	\$(CC) \$(DSO_CFLAGS) $linkflags\$(DSO_LDFLAGS) \\
1874	-o $dso$shared_def \\
1875	$objs \\
1876	$linklibs\$(DSO_EX_LIBS)
1877	EOF
1878	}
1879	sub obj2lib {
1880	my %args = @_;
1881	my $lib = platform->staticlib($args{lib});
1882	my @objs = map { platform->obj($_) } @{$args{objs}};
1883	my $deps = join(" \\\n" . ' ' x (length($lib) + 2),
1884	fill_lines(' ', $COLUMNS - length($lib) - 2, @objs));
1885	my $max_per_call = 500;
1886	my @objs_grouped;
1887	push @objs_grouped, join(" ", splice @objs, 0, $max_per_call) while @objs;
1888	my $fill_lib =
1889	join("\n\t", (map { "\$(AR) \$(ARFLAGS) $lib $_" } @objs_grouped));
1890	return <<"EOF";
1891	$lib: $deps
1892	\$(RM) $lib
1893	$fill_lib
1894	\$(RANLIB) \$\@ \|\| echo Never mind.
1895	EOF
1896	}
1897	sub obj2bin {
1898	my %args = @_;
1899	my $bin = platform->bin($args{bin});
1900	my @objs = map { platform->obj($_) } @{$args{objs}};
1901	my @deps = compute_lib_depends(@{$args{deps}});
1902	my $objs = join(" \\\n" . ' ' x (length($bin) + 2),
1903	fill_lines(' ', $COLUMNS - length($bin) - 2, @objs));
1904	my @linkdirs = ();
1905	my @linklibs = ();
1906	foreach (@{$args{deps}}) {
1907	next unless defined $_;
1908	if (platform->isstaticlib($_)) {
1909	push @linklibs, platform->convertext($_);
1910	} else {
1911	my $d = "-L" . dirname($_);
1912	my $l = basename($_);
1913	$l =~ s/^lib//;
1914	$l = "-l" . $l;
1915	push @linklibs, $l;
1916	push @linkdirs, $d unless grep { $d eq $_ } @linkdirs;
1917	}
1918	}
1919	my $linkflags = join("", map { $_." " } @linkdirs);
1920	my $linklibs = join("", map { $_." " } @linklibs);
1921	my $cmd = '$(CC)';
1922	my $cmdflags = '$(BIN_CFLAGS)';
1923	if (grep /_cc\.o$/, @{$args{objs}}) {
1924	$cmd = '$(CXX)';
1925	$cmdflags = '$(BIN_CXXFLAGS)';
1926	}
1927
1928	my $objs = join(" \\\n\t\t", fill_lines(' ', $COLUMNS - 16, @objs));
1929	my $deps = join(" \\\n" . ' ' x (length($bin) + 2),
1930	fill_lines(' ', $COLUMNS - length($bin) - 2,
1931	@objs, @deps));
1932
1933	return <<"EOF";
1934	$bin: $deps
1935	rm -f $bin
1936	\$\${LDCMD:-$cmd} $cmdflags $linkflags\$(BIN_LDFLAGS) \\
1937	-o $bin \\
1938	$objs \\
1939	$linklibs\$(BIN_EX_LIBS)
1940	EOF
1941	}
1942	sub in2script {
1943	my %args = @_;
1944	my $script = $args{script};
1945	my $sources = join(" ", @{$args{sources}});
1946	my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
1947	"util", "dofile.pl")),
1948	rel2abs($config{builddir}));
1949	return <<"EOF";
1950	$script: $sources configdata.pm
1951	\$(RM) "$script"
1952	\$(PERL) "-I\$(BLDDIR)" -Mconfigdata "$dofile" \\
1953	"-o$target{build_file}" $sources > "$script"
1954	chmod a+x $script
1955	EOF
1956	}
1957	sub generatedir {
1958	my %args = @_;
1959	my $dir = $args{dir};
1960	my @deps = compute_platform_depends(@{$args{deps}});
1961	my @comments = ();
1962
1963	# We already have a 'test' target, and the top directory is just plain
1964	# silly
1965	return if $dir eq "test" \|\| $dir eq ".";
1966
1967	foreach my $type (("dso", "lib", "bin", "script")) {
1968	next unless defined($unified_info{dirinfo}->{$dir}->{products}->{$type});
1969	# For lib object files, we could update the library. However, it
1970	# was decided that it's enough to build the directory local object
1971	# files, so we don't need to add any actions, and the dependencies
1972	# are already taken care of.
1973	if ($type ne "lib") {
1974	foreach my $prod (@{$unified_info{dirinfo}->{$dir}->{products}->{$type}}) {
1975	if (dirname($prod) eq $dir) {
1976	push @deps, compute_platform_depends($prod);
1977	} else {
1978	push @comments, "# No support to produce $type ".join(", ", @{$unified_info{dirinfo}->{$dir}->{products}->{$type}});
1979	}
1980	}
1981	}
1982	}
1983
1984	my $target = "$dir $dir/";
1985	my $deps = join(" \\\n\t",
1986	fill_lines(' ', $COLUMNS - 8, @deps));
1987	my $comments = join("\n", "", @comments);
1988	return <<"EOF";
1989	$target: \\
1990	$deps$comments
1991	EOF
1992	}
1993	"" # Important! This becomes part of the template result.
1994	-}

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format