source: vbox/trunk/src/bldprogs/scm.cpp@ 37529

/* $Id: scm.cpp 35404 2011-01-05 11:32:29Z vboxsync $ */
/** @file
 * IPRT Testcase / Tool - Source Code Massager.
 */

/*
 * Copyright (C) 2010 Oracle Corporation
 *
 * This file is part of VirtualBox Open Source Edition (OSE), as
 * available from http://www.virtualbox.org. This file is free software;
 * you can redistribute it and/or modify it under the terms of the GNU
 * General Public License (GPL) as published by the Free Software
 * Foundation, in version 2 as it comes in the "COPYING" file of the
 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
 */

/*******************************************************************************
*   Header Files                                                               *
*******************************************************************************/
#include <iprt/assert.h>
#include <iprt/ctype.h>
#include <iprt/dir.h>
#include <iprt/env.h>
#include <iprt/file.h>
#include <iprt/err.h>
#include <iprt/getopt.h>
#include <iprt/initterm.h>
#include <iprt/mem.h>
#include <iprt/message.h>
#include <iprt/param.h>
#include <iprt/path.h>
#include <iprt/process.h>
#include <iprt/stream.h>
#include <iprt/string.h>


/*******************************************************************************
*   Defined Constants And Macros                                               *
*******************************************************************************/
/** The name of the settings files. */
#define SCM_SETTINGS_FILENAME           ".scm-settings"


/*******************************************************************************
*   Structures and Typedefs                                                    *
*******************************************************************************/
/** Pointer to const massager settings. */
typedef struct SCMSETTINGSBASE const *PCSCMSETTINGSBASE;

/** End of line marker type. */
typedef enum SCMEOL
{
    SCMEOL_NONE = 0,
    SCMEOL_LF = 1,
    SCMEOL_CRLF = 2
} SCMEOL;
/** Pointer to an end of line marker type. */
typedef SCMEOL *PSCMEOL;

/**
 * Line record.
 */
typedef struct SCMSTREAMLINE
{
    /** The offset of the line. */
    size_t          off;
    /** The line length, excluding the LF character.
     * @todo This could be derived from the offset of the next line if that wasn't
     *       so tedious. */
    size_t          cch;
    /** The end of line marker type. */
    SCMEOL          enmEol;
} SCMSTREAMLINE;
/** Pointer to a line record. */
typedef SCMSTREAMLINE *PSCMSTREAMLINE;

/**
 * Source code massager stream.
 */
typedef struct SCMSTREAM
{
    /** Pointer to the file memory. */
    char           *pch;
    /** The current stream position. */
    size_t          off;
    /** The current stream size. */
    size_t          cb;
    /** The size of the memory pb points to. */
    size_t          cbAllocated;

    /** Line records. */
    PSCMSTREAMLINE  paLines;
    /** The current line. */
    size_t          iLine;
    /** The current stream size given in lines.   */
    size_t          cLines;
    /** The sizeof the the memory backing paLines.   */
    size_t          cLinesAllocated;

    /** Set if write-only, clear if read-only. */
    bool            fWriteOrRead;
    /** Set if the memory pb points to is from RTFileReadAll. */
    bool            fFileMemory;
    /** Set if fully broken into lines. */
    bool            fFullyLineated;

    /** Stream status code (IPRT). */
    int             rc;
} SCMSTREAM;
/** Pointer to a SCM stream. */
typedef SCMSTREAM *PSCMSTREAM;
/** Pointer to a const SCM stream. */
typedef SCMSTREAM const *PCSCMSTREAM;


/**
 * SVN property.
 */
typedef struct SCMSVNPROP
{
    /** The property. */
    char           *pszName;
    /** The value.
     * When used to record updates, this can be set to NULL to trigger the
     * deletion of the property. */
    char           *pszValue;
} SCMSVNPROP;
/** Pointer to a SVN property. */
typedef SCMSVNPROP *PSCMSVNPROP;
/** Pointer to a const  SVN property. */
typedef SCMSVNPROP const *PCSCMSVNPROP;


/**
 * Rewriter state.
 */
typedef struct SCMRWSTATE
{
    /** The filename.  */
    const char     *pszFilename;
    /** Set after the printing the first verbose message about a file under
     *  rewrite. */
    bool            fFirst;
    /** The number of SVN property changes. */
    size_t          cSvnPropChanges;
    /** Pointer to an array of SVN property changes. */
    PSCMSVNPROP     paSvnPropChanges;
} SCMRWSTATE;
/** Pointer to the rewriter state. */
typedef SCMRWSTATE *PSCMRWSTATE;

/**
 * A rewriter.
 *
 * This works like a stream editor, reading @a pIn, modifying it and writing it
 * to @a pOut.
 *
 * @returns true if any changes were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
typedef bool (*PFNSCMREWRITER)(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);


/**
 * Configuration entry.
 */
typedef struct SCMCFGENTRY
{
    /** Number of rewriters. */
    size_t          cRewriters;
    /** Pointer to an array of rewriters. */
    PFNSCMREWRITER const  *papfnRewriter;
    /** File pattern (simple).  */
    const char     *pszFilePattern;
} SCMCFGENTRY;
typedef SCMCFGENTRY *PSCMCFGENTRY;
typedef SCMCFGENTRY const *PCSCMCFGENTRY;


/**
 * Diff state.
 */
typedef struct SCMDIFFSTATE
{
    size_t          cDiffs;
    const char     *pszFilename;

    PSCMSTREAM      pLeft;
    PSCMSTREAM      pRight;

    /** Whether to ignore end of line markers when diffing. */
    bool            fIgnoreEol;
    /** Whether to ignore trailing whitespace. */
    bool            fIgnoreTrailingWhite;
    /** Whether to ignore leading whitespace. */
    bool            fIgnoreLeadingWhite;
    /** Whether to print special characters in human readable form or not. */
    bool            fSpecialChars;
    /** The tab size. */
    size_t          cchTab;
    /** Where to push the diff. */
    PRTSTREAM       pDiff;
} SCMDIFFSTATE;
/** Pointer to a diff state. */
typedef SCMDIFFSTATE *PSCMDIFFSTATE;

/**
 * Source Code Massager Settings.
 */
typedef struct SCMSETTINGSBASE
{
    bool            fConvertEol;
    bool            fConvertTabs;
    bool            fForceFinalEol;
    bool            fForceTrailingLine;
    bool            fStripTrailingBlanks;
    bool            fStripTrailingLines;
    /** Only process files that are part of a SVN working copy. */
    bool            fOnlySvnFiles;
    /** Only recurse into directories containing an .svn dir.  */
    bool            fOnlySvnDirs;
    /** Set svn:eol-style if missing or incorrect. */
    bool            fSetSvnEol;
    /** Set svn:executable according to type (unusually this means deleting it). */
    bool            fSetSvnExecutable;
    /** Set svn:keyword if completely or partially missing. */
    bool            fSetSvnKeywords;
    /**  */
    unsigned        cchTab;
    /** Only consider files matching these patterns.  This is only applied to the
     *  base names. */
    char           *pszFilterFiles;
    /** Filter out files matching the following patterns.  This is applied to base
     *  names as well as the absolute paths.  */
    char           *pszFilterOutFiles;
    /** Filter out directories matching the following patterns.  This is applied
     *  to base names as well as the absolute paths.  All absolute paths ends with a
     *  slash and dot ("/.").  */
    char           *pszFilterOutDirs;
} SCMSETTINGSBASE;
/** Pointer to massager settings. */
typedef SCMSETTINGSBASE *PSCMSETTINGSBASE;

/**
 * Option identifiers.
 *
 * @note    The first chunk, down to SCMOPT_TAB_SIZE, are alternately set &
 *          clear.  So, the option setting a flag (boolean) will have an even
 *          number and the one clearing it will have an odd number.
 * @note    Down to SCMOPT_LAST_SETTINGS corresponds exactly to SCMSETTINGSBASE.
 */
typedef enum SCMOPT
{
    SCMOPT_CONVERT_EOL = 10000,
    SCMOPT_NO_CONVERT_EOL,
    SCMOPT_CONVERT_TABS,
    SCMOPT_NO_CONVERT_TABS,
    SCMOPT_FORCE_FINAL_EOL,
    SCMOPT_NO_FORCE_FINAL_EOL,
    SCMOPT_FORCE_TRAILING_LINE,
    SCMOPT_NO_FORCE_TRAILING_LINE,
    SCMOPT_STRIP_TRAILING_BLANKS,
    SCMOPT_NO_STRIP_TRAILING_BLANKS,
    SCMOPT_STRIP_TRAILING_LINES,
    SCMOPT_NO_STRIP_TRAILING_LINES,
    SCMOPT_ONLY_SVN_DIRS,
    SCMOPT_NOT_ONLY_SVN_DIRS,
    SCMOPT_ONLY_SVN_FILES,
    SCMOPT_NOT_ONLY_SVN_FILES,
    SCMOPT_SET_SVN_EOL,
    SCMOPT_DONT_SET_SVN_EOL,
    SCMOPT_SET_SVN_EXECUTABLE,
    SCMOPT_DONT_SET_SVN_EXECUTABLE,
    SCMOPT_SET_SVN_KEYWORDS,
    SCMOPT_DONT_SET_SVN_KEYWORDS,
    SCMOPT_TAB_SIZE,
    SCMOPT_FILTER_OUT_DIRS,
    SCMOPT_FILTER_FILES,
    SCMOPT_FILTER_OUT_FILES,
    SCMOPT_LAST_SETTINGS = SCMOPT_FILTER_OUT_FILES,
    //
    SCMOPT_DIFF_IGNORE_EOL,
    SCMOPT_DIFF_NO_IGNORE_EOL,
    SCMOPT_DIFF_IGNORE_SPACE,
    SCMOPT_DIFF_NO_IGNORE_SPACE,
    SCMOPT_DIFF_IGNORE_LEADING_SPACE,
    SCMOPT_DIFF_NO_IGNORE_LEADING_SPACE,
    SCMOPT_DIFF_IGNORE_TRAILING_SPACE,
    SCMOPT_DIFF_NO_IGNORE_TRAILING_SPACE,
    SCMOPT_DIFF_SPECIAL_CHARS,
    SCMOPT_DIFF_NO_SPECIAL_CHARS,
    SCMOPT_END
} SCMOPT;


/**
 * File/dir pattern + options.
 */
typedef struct SCMPATRNOPTPAIR
{
    char *pszPattern;
    char *pszOptions;
} SCMPATRNOPTPAIR;
/** Pointer to a pattern + option pair. */
typedef SCMPATRNOPTPAIR *PSCMPATRNOPTPAIR;


/** Pointer to a settings set. */
typedef struct SCMSETTINGS *PSCMSETTINGS;
/**
 * Settings set.
 *
 * This structure is constructed from the command line arguments or any
 * .scm-settings file found in a directory we recurse into.  When recursing in
 * and out of a directory, we push and pop a settings set for it.
 *
 * The .scm-settings file has two kinds of setttings, first there are the
 * unqualified base settings and then there are the settings which applies to a
 * set of files or directories.  The former are lines with command line options.
 * For the latter, the options are preceded by a string pattern and a colon.
 * The pattern specifies which files (and/or directories) the options applies
 * to.
 *
 * We parse the base options into the Base member and put the others into the
 * paPairs array.
 */
typedef struct SCMSETTINGS
{
    /** Pointer to the setting file below us in the stack. */
    PSCMSETTINGS        pDown;
    /** Pointer to the setting file above us in the stack. */
    PSCMSETTINGS        pUp;
    /** File/dir patterns and their options. */
    PSCMPATRNOPTPAIR    paPairs;
    /** The number of entires in paPairs. */
    uint32_t            cPairs;
    /** The base settings that was read out of the file. */
    SCMSETTINGSBASE     Base;
} SCMSETTINGS;
/** Pointer to a const settings set. */
typedef SCMSETTINGS const *PCSCMSETTINGS;


/*******************************************************************************
*   Internal Functions                                                         *
*******************************************************************************/
static bool rewrite_StripTrailingBlanks(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_ExpandTabs(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_ForceNativeEol(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_ForceLF(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_ForceCRLF(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_AdjustTrailingLines(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_SvnNoExecutable(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_SvnKeywords(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_Makefile_kup(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_Makefile_kmk(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);
static bool rewrite_C_and_CPP(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings);


/*******************************************************************************
*   Global Variables                                                           *
*******************************************************************************/
static const char   g_szProgName[]          = "scm";
static const char  *g_pszChangedSuff        = "";
static const char   g_szTabSpaces[16+1]     = "                ";
static bool         g_fDryRun               = true;
static bool         g_fDiffSpecialChars     = true;
static bool         g_fDiffIgnoreEol        = false;
static bool         g_fDiffIgnoreLeadingWS  = false;
static bool         g_fDiffIgnoreTrailingWS = false;
static int          g_iVerbosity            = 2;//99; //0;

/** The global settings. */
static SCMSETTINGSBASE const g_Defaults =
{
    /* .fConvertEol = */            true,
    /* .fConvertTabs = */           true,
    /* .fForceFinalEol = */         true,
    /* .fForceTrailingLine = */     false,
    /* .fStripTrailingBlanks = */   true,
    /* .fStripTrailingLines = */    true,
    /* .fOnlySvnFiles = */          false,
    /* .fOnlySvnDirs = */           false,
    /* .fSetSvnEol = */             false,
    /* .fSetSvnExecutable = */      false,
    /* .fSetSvnKeywords = */        false,
    /* .cchTab = */                 8,
    /* .pszFilterFiles = */         (char *)"",
    /* .pszFilterOutFiles = */      (char *)"*.exe|*.com|20*-*-*.log",
    /* .pszFilterOutDirs = */       (char *)".svn|.hg|.git|CVS",
};

/** Option definitions for the base settings. */
static RTGETOPTDEF  g_aScmOpts[] =
{
    { "--convert-eol",                      SCMOPT_CONVERT_EOL,                     RTGETOPT_REQ_NOTHING },
    { "--no-convert-eol",                   SCMOPT_NO_CONVERT_EOL,                  RTGETOPT_REQ_NOTHING },
    { "--convert-tabs",                     SCMOPT_CONVERT_TABS,                    RTGETOPT_REQ_NOTHING },
    { "--no-convert-tabs",                  SCMOPT_NO_CONVERT_TABS,                 RTGETOPT_REQ_NOTHING },
    { "--force-final-eol",                  SCMOPT_FORCE_FINAL_EOL,                 RTGETOPT_REQ_NOTHING },
    { "--no-force-final-eol",               SCMOPT_NO_FORCE_FINAL_EOL,              RTGETOPT_REQ_NOTHING },
    { "--force-trailing-line",              SCMOPT_FORCE_TRAILING_LINE,             RTGETOPT_REQ_NOTHING },
    { "--no-force-trailing-line",           SCMOPT_NO_FORCE_TRAILING_LINE,          RTGETOPT_REQ_NOTHING },
    { "--strip-trailing-blanks",            SCMOPT_STRIP_TRAILING_BLANKS,           RTGETOPT_REQ_NOTHING },
    { "--no-strip-trailing-blanks",         SCMOPT_NO_STRIP_TRAILING_BLANKS,        RTGETOPT_REQ_NOTHING },
    { "--strip-trailing-lines",             SCMOPT_STRIP_TRAILING_LINES,            RTGETOPT_REQ_NOTHING },
    { "--strip-no-trailing-lines",          SCMOPT_NO_STRIP_TRAILING_LINES,         RTGETOPT_REQ_NOTHING },
    { "--only-svn-dirs",                    SCMOPT_ONLY_SVN_DIRS,                   RTGETOPT_REQ_NOTHING },
    { "--not-only-svn-dirs",                SCMOPT_NOT_ONLY_SVN_DIRS,               RTGETOPT_REQ_NOTHING },
    { "--only-svn-files",                   SCMOPT_ONLY_SVN_FILES,                  RTGETOPT_REQ_NOTHING },
    { "--not-only-svn-files",               SCMOPT_NOT_ONLY_SVN_FILES,              RTGETOPT_REQ_NOTHING },
    { "--set-svn-eol",                      SCMOPT_SET_SVN_EOL,                     RTGETOPT_REQ_NOTHING },
    { "--dont-set-svn-eol",                 SCMOPT_DONT_SET_SVN_EOL,                RTGETOPT_REQ_NOTHING },
    { "--set-svn-executable",               SCMOPT_SET_SVN_EXECUTABLE,              RTGETOPT_REQ_NOTHING },
    { "--dont-set-svn-executable",          SCMOPT_DONT_SET_SVN_EXECUTABLE,         RTGETOPT_REQ_NOTHING },
    { "--set-svn-keywords",                 SCMOPT_SET_SVN_KEYWORDS,                RTGETOPT_REQ_NOTHING },
    { "--dont-set-svn-keywords",            SCMOPT_DONT_SET_SVN_KEYWORDS,           RTGETOPT_REQ_NOTHING },
    { "--tab-size",                         SCMOPT_TAB_SIZE,                        RTGETOPT_REQ_UINT8   },
    { "--filter-out-dirs",                  SCMOPT_FILTER_OUT_DIRS,                 RTGETOPT_REQ_STRING  },
    { "--filter-files",                     SCMOPT_FILTER_FILES,                    RTGETOPT_REQ_STRING  },
    { "--filter-out-files",                 SCMOPT_FILTER_OUT_FILES,                RTGETOPT_REQ_STRING  },
};

/** Consider files matching the following patterns (base names only). */
static const char  *g_pszFileFilter         = NULL;

static PFNSCMREWRITER const g_aRewritersFor_Makefile_kup[] =
{
    rewrite_SvnNoExecutable,
    rewrite_Makefile_kup
};

static PFNSCMREWRITER const g_aRewritersFor_Makefile_kmk[] =
{
    rewrite_ForceNativeEol,
    rewrite_StripTrailingBlanks,
    rewrite_AdjustTrailingLines,
    rewrite_SvnNoExecutable,
    rewrite_SvnKeywords,
    rewrite_Makefile_kmk
};

static PFNSCMREWRITER const g_aRewritersFor_C_and_CPP[] =
{
    rewrite_ForceNativeEol,
    rewrite_ExpandTabs,
    rewrite_StripTrailingBlanks,
    rewrite_AdjustTrailingLines,
    rewrite_SvnNoExecutable,
    rewrite_SvnKeywords,
    rewrite_C_and_CPP
};

static PFNSCMREWRITER const g_aRewritersFor_H_and_HPP[] =
{
    rewrite_ForceNativeEol,
    rewrite_ExpandTabs,
    rewrite_StripTrailingBlanks,
    rewrite_AdjustTrailingLines,
    rewrite_SvnNoExecutable,
    rewrite_C_and_CPP
};

static PFNSCMREWRITER const g_aRewritersFor_RC[] =
{
    rewrite_ForceNativeEol,
    rewrite_ExpandTabs,
    rewrite_StripTrailingBlanks,
    rewrite_AdjustTrailingLines,
    rewrite_SvnNoExecutable,
    rewrite_SvnKeywords
};

static PFNSCMREWRITER const g_aRewritersFor_ShellScripts[] =
{
    rewrite_ForceLF,
    rewrite_ExpandTabs,
    rewrite_StripTrailingBlanks
};

static PFNSCMREWRITER const g_aRewritersFor_BatchFiles[] =
{
    rewrite_ForceCRLF,
    rewrite_ExpandTabs,
    rewrite_StripTrailingBlanks
};

static SCMCFGENTRY const g_aConfigs[] =
{
    { RT_ELEMENTS(g_aRewritersFor_Makefile_kup), &g_aRewritersFor_Makefile_kup[0], "Makefile.kup" },
    { RT_ELEMENTS(g_aRewritersFor_Makefile_kmk), &g_aRewritersFor_Makefile_kmk[0], "Makefile.kmk|Config.kmk" },
    { RT_ELEMENTS(g_aRewritersFor_C_and_CPP),    &g_aRewritersFor_C_and_CPP[0],    "*.c|*.cpp|*.C|*.CPP|*.cxx|*.cc" },
    { RT_ELEMENTS(g_aRewritersFor_H_and_HPP),    &g_aRewritersFor_H_and_HPP[0],    "*.h|*.hpp" },
    { RT_ELEMENTS(g_aRewritersFor_RC),           &g_aRewritersFor_RC[0],           "*.rc" },
    { RT_ELEMENTS(g_aRewritersFor_ShellScripts), &g_aRewritersFor_ShellScripts[0], "*.sh|configure" },
    { RT_ELEMENTS(g_aRewritersFor_BatchFiles),   &g_aRewritersFor_BatchFiles[0],   "*.bat|*.cmd|*.btm|*.vbs|*.ps1" },
};


/* -=-=-=-=-=- memory streams -=-=-=-=-=- */


/**
 * Initializes the stream structure.
 *
 * @param   pStream             The stream structure.
 * @param   fWriteOrRead        The value of the fWriteOrRead stream member.
 */
static void scmStreamInitInternal(PSCMSTREAM pStream, bool fWriteOrRead)
{
    pStream->pch                = NULL;
    pStream->off                = 0;
    pStream->cb                 = 0;
    pStream->cbAllocated        = 0;

    pStream->paLines            = NULL;
    pStream->iLine              = 0;
    pStream->cLines             = 0;
    pStream->cLinesAllocated    = 0;

    pStream->fWriteOrRead       = fWriteOrRead;
    pStream->fFileMemory        = false;
    pStream->fFullyLineated     = false;

    pStream->rc                 = VINF_SUCCESS;
}

/**
 * Initialize an input stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream to initialize.
 * @param   pszFilename         The file to take the stream content from.
 */
int ScmStreamInitForReading(PSCMSTREAM pStream, const char *pszFilename)
{
    scmStreamInitInternal(pStream, false /*fWriteOrRead*/);

    void *pvFile;
    size_t cbFile;
    int rc = pStream->rc = RTFileReadAll(pszFilename, &pvFile, &cbFile);
    if (RT_SUCCESS(rc))
    {
        pStream->pch            = (char *)pvFile;
        pStream->cb             = cbFile;
        pStream->cbAllocated    = cbFile;
        pStream->fFileMemory    = true;
    }
    return rc;
}

/**
 * Initialize an output stream.
 *
 * @returns IPRT status code
 * @param   pStream             The stream to initialize.
 * @param   pRelatedStream      Pointer to a related stream.  NULL is fine.
 */
int ScmStreamInitForWriting(PSCMSTREAM pStream, PCSCMSTREAM pRelatedStream)
{
    scmStreamInitInternal(pStream, true /*fWriteOrRead*/);

    /* allocate stuff */
    size_t cbEstimate = pRelatedStream
                      ? pRelatedStream->cb + pRelatedStream->cb / 10
                      : _64K;
    cbEstimate = RT_ALIGN(cbEstimate, _4K);
    pStream->pch = (char *)RTMemAlloc(cbEstimate);
    if (pStream->pch)
    {
        size_t cLinesEstimate = pRelatedStream && pRelatedStream->fFullyLineated
                              ? pRelatedStream->cLines + pRelatedStream->cLines / 10
                              : cbEstimate / 24;
        cLinesEstimate = RT_ALIGN(cLinesEstimate, 512);
        pStream->paLines = (PSCMSTREAMLINE)RTMemAlloc(cLinesEstimate * sizeof(SCMSTREAMLINE));
        if (pStream->paLines)
        {
            pStream->paLines[0].off     = 0;
            pStream->paLines[0].cch     = 0;
            pStream->paLines[0].enmEol  = SCMEOL_NONE;
            pStream->cbAllocated        = cbEstimate;
            pStream->cLinesAllocated    = cLinesEstimate;
            return VINF_SUCCESS;
        }

        RTMemFree(pStream->pch);
        pStream->pch = NULL;
    }
    return pStream->rc = VERR_NO_MEMORY;
}

/**
 * Frees the resources associated with the stream.
 *
 * Nothing is happens to whatever the stream was initialized from or dumped to.
 *
 * @param   pStream             The stream to delete.
 */
void ScmStreamDelete(PSCMSTREAM pStream)
{
    if (pStream->pch)
    {
        if (pStream->fFileMemory)
            RTFileReadAllFree(pStream->pch, pStream->cbAllocated);
        else
            RTMemFree(pStream->pch);
        pStream->pch = NULL;
    }
    pStream->cbAllocated = 0;

    if (pStream->paLines)
    {
        RTMemFree(pStream->paLines);
        pStream->paLines = NULL;
    }
    pStream->cLinesAllocated = 0;
}

/**
 * Get the stream status code.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.
 */
int ScmStreamGetStatus(PCSCMSTREAM pStream)
{
    return pStream->rc;
}

/**
 * Grows the buffer of a write stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.  Must be in write mode.
 * @param   cbAppending         The minimum number of bytes to grow the buffer
 *                              with.
 */
static int scmStreamGrowBuffer(PSCMSTREAM pStream, size_t cbAppending)
{
    size_t cbAllocated = pStream->cbAllocated;
    cbAllocated += RT_MAX(0x1000 + cbAppending, cbAllocated);
    cbAllocated = RT_ALIGN(cbAllocated, 0x1000);
    void *pvNew;
    if (!pStream->fFileMemory)
    {
        pvNew = RTMemRealloc(pStream->pch, cbAllocated);
        if (!pvNew)
            return pStream->rc = VERR_NO_MEMORY;
    }
    else
    {
        pvNew = RTMemDupEx(pStream->pch, pStream->off, cbAllocated - pStream->off);
        if (!pvNew)
            return pStream->rc = VERR_NO_MEMORY;
        RTFileReadAllFree(pStream->pch, pStream->cbAllocated);
        pStream->fFileMemory = false;
    }
    pStream->pch = (char *)pvNew;
    pStream->cbAllocated = cbAllocated;

    return VINF_SUCCESS;
}

/**
 * Grows the line array of a stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.
 * @param   iMinLine            Minimum line number.
 */
static int scmStreamGrowLines(PSCMSTREAM pStream, size_t iMinLine)
{
    size_t cLinesAllocated = pStream->cLinesAllocated;
    cLinesAllocated += RT_MAX(512 + iMinLine, cLinesAllocated);
    cLinesAllocated = RT_ALIGN(cLinesAllocated, 512);
    void *pvNew = RTMemRealloc(pStream->paLines, cLinesAllocated * sizeof(SCMSTREAMLINE));
    if (!pvNew)
        return pStream->rc = VERR_NO_MEMORY;

    pStream->paLines = (PSCMSTREAMLINE)pvNew;
    pStream->cLinesAllocated = cLinesAllocated;
    return VINF_SUCCESS;
}

/**
 * Rewinds the stream and sets the mode to read.
 *
 * @param   pStream             The stream.
 */
void ScmStreamRewindForReading(PSCMSTREAM pStream)
{
    pStream->off          = 0;
    pStream->iLine        = 0;
    pStream->fWriteOrRead = false;
    pStream->rc           = VINF_SUCCESS;
}

/**
 * Rewinds the stream and sets the mode to write.
 *
 * @param   pStream             The stream.
 */
void ScmStreamRewindForWriting(PSCMSTREAM pStream)
{
    pStream->off            = 0;
    pStream->iLine          = 0;
    pStream->cLines         = 0;
    pStream->fWriteOrRead   = true;
    pStream->fFullyLineated = true;
    pStream->rc             = VINF_SUCCESS;
}

/**
 * Checks if it's a text stream.
 *
 * Not 100% proof.
 *
 * @returns true if it probably is a text file, false if not.
 * @param   pStream             The stream. Write or read, doesn't matter.
 */
bool ScmStreamIsText(PSCMSTREAM pStream)
{
    if (RTStrEnd(pStream->pch, pStream->cb))
        return false;
    if (!pStream->cb)
        return false;
    return true;
}

/**
 * Performs an integrity check of the stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.
 */
int ScmStreamCheckItegrity(PSCMSTREAM pStream)
{
    /*
     * Perform sanity checks.
     */
    size_t const cbFile = pStream->cb;
    for (size_t iLine = 0; iLine < pStream->cLines; iLine++)
    {
        size_t offEol = pStream->paLines[iLine].off + pStream->paLines[iLine].cch;
        AssertReturn(offEol + pStream->paLines[iLine].enmEol <= cbFile, VERR_INTERNAL_ERROR_2);
        switch (pStream->paLines[iLine].enmEol)
        {
            case SCMEOL_LF:
                AssertReturn(pStream->pch[offEol] == '\n', VERR_INTERNAL_ERROR_3);
                break;
            case SCMEOL_CRLF:
                AssertReturn(pStream->pch[offEol] == '\r', VERR_INTERNAL_ERROR_3);
                AssertReturn(pStream->pch[offEol + 1] == '\n', VERR_INTERNAL_ERROR_3);
                break;
            case SCMEOL_NONE:
                AssertReturn(iLine + 1 >= pStream->cLines, VERR_INTERNAL_ERROR_4);
                break;
            default:
                AssertReturn(iLine + 1 >= pStream->cLines, VERR_INTERNAL_ERROR_5);
        }
    }
    return VINF_SUCCESS;
}

/**
 * Writes the stream to a file.
 *
 * @returns IPRT status code
 * @param   pStream             The stream.
 * @param   pszFilenameFmt      The filename format string.
 * @param   ...                 Format arguments.
 */
int ScmStreamWriteToFile(PSCMSTREAM pStream, const char *pszFilenameFmt, ...)
{
    int rc;

#ifdef RT_STRICT
    /*
     * Check that what we're going to write makes sense first.
     */
    rc = ScmStreamCheckItegrity(pStream);
    if (RT_FAILURE(rc))
        return rc;
#endif

    /*
     * Do the actual writing.
     */
    RTFILE hFile;
    va_list va;
    va_start(va, pszFilenameFmt);
    rc = RTFileOpenV(&hFile, RTFILE_O_WRITE | RTFILE_O_CREATE_REPLACE | RTFILE_O_DENY_WRITE, pszFilenameFmt, va);
    if (RT_SUCCESS(rc))
    {
        rc = RTFileWrite(hFile, pStream->pch, pStream->cb, NULL);
        RTFileClose(hFile);
    }
    return rc;
}

/**
 * Worker for ScmStreamGetLine that builds the line number index while parsing
 * the stream.
 *
 * @returns Same as SCMStreamGetLine.
 * @param   pStream             The stream.  Must be in read mode.
 * @param   pcchLine            Where to return the line length.
 * @param   penmEol             Where to return the kind of end of line marker.
 */
static const char *scmStreamGetLineInternal(PSCMSTREAM pStream, size_t *pcchLine, PSCMEOL penmEol)
{
    AssertReturn(!pStream->fWriteOrRead, NULL);
    if (RT_FAILURE(pStream->rc))
        return NULL;

    size_t off = pStream->off;
    size_t cb  = pStream->cb;
    if (RT_UNLIKELY(off >= cb))
    {
        pStream->fFullyLineated = true;
        return NULL;
    }

    size_t iLine = pStream->iLine;
    if (RT_UNLIKELY(iLine >= pStream->cLinesAllocated))
    {
        int rc = scmStreamGrowLines(pStream, iLine);
        if (RT_FAILURE(rc))
            return NULL;
    }
    pStream->paLines[iLine].off = off;

    cb -= off;
    const char *pchRet = &pStream->pch[off];
    const char *pch = (const char *)memchr(pchRet, '\n', cb);
    if (RT_LIKELY(pch))
    {
        cb = pch - pchRet;
        pStream->off = off + cb + 1;
        if (   cb < 1
            || pch[-1] != '\r')
            pStream->paLines[iLine].enmEol = *penmEol = SCMEOL_LF;
        else
        {
            pStream->paLines[iLine].enmEol = *penmEol = SCMEOL_CRLF;
            cb--;
        }
    }
    else
    {
        pStream->off = off + cb;
        pStream->paLines[iLine].enmEol = *penmEol = SCMEOL_NONE;
    }
    *pcchLine = cb;
    pStream->paLines[iLine].cch = cb;
    pStream->cLines = pStream->iLine = ++iLine;

    return pchRet;
}

/**
 * Internal worker that delineates a stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.  Caller must check that it is in
 *                              read mode.
 */
static int scmStreamLineate(PSCMSTREAM pStream)
{
    /* Save the stream position. */
    size_t const offSaved   = pStream->off;
    size_t const iLineSaved = pStream->iLine;

    /* Get each line. */
    size_t cchLine;
    SCMEOL enmEol;
    while (scmStreamGetLineInternal(pStream, &cchLine, &enmEol))
        /* nothing */;
    Assert(RT_FAILURE(pStream->rc) || pStream->fFullyLineated);

    /* Restore the position */
    pStream->off   = offSaved;
    pStream->iLine = iLineSaved;

    return pStream->rc;
}

/**
 * Get the current stream position as an byte offset.
 *
 * @returns The current byte offset
 * @param   pStream             The stream.
 */
size_t ScmStreamTell(PSCMSTREAM pStream)
{
    return pStream->off;
}

/**
 * Get the current stream position as a line number.
 *
 * @returns The current line (0-based).
 * @param   pStream             The stream.
 */
size_t ScmStreamTellLine(PSCMSTREAM pStream)
{
    return pStream->iLine;
}

/**
 * Get the current stream size in bytes.
 *
 * @returns Count of bytes.
 * @param   pStream             The stream.
 */
size_t ScmStreamSize(PSCMSTREAM pStream)
{
    return pStream->cb;
}

/**
 * Gets the number of lines in the stream.
 *
 * @returns The number of lines.
 * @param   pStream             The stream.
 */
size_t ScmStreamCountLines(PSCMSTREAM pStream)
{
    if (!pStream->fFullyLineated)
        scmStreamLineate(pStream);
    return pStream->cLines;
}

/**
 * Seeks to a given byte offset in the stream.
 *
 * @returns IPRT status code.
 * @retval  VERR_SEEK if the new stream position is the middle of an EOL marker.
 *          This is a temporary restriction.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   offAbsolute         The offset to seek to.  If this is beyond the
 *                              end of the stream, the position is set to the
 *                              end.
 */
int ScmStreamSeekAbsolute(PSCMSTREAM pStream, size_t offAbsolute)
{
    AssertReturn(!pStream->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /* Must be fully delineated. (lazy bird) */
    if (RT_UNLIKELY(!pStream->fFullyLineated))
    {
        int rc = scmStreamLineate(pStream);
        if (RT_FAILURE(rc))
            return rc;
    }

    /* Ok, do the job. */
    if (offAbsolute < pStream->cb)
    {
        /** @todo Should do a binary search here, but I'm too darn lazy tonight. */
        pStream->off = ~(size_t)0;
        for (size_t i = 0; i < pStream->cLines; i++)
        {
            if (offAbsolute < pStream->paLines[i].off + pStream->paLines[i].cch + pStream->paLines[i].enmEol)
            {
                pStream->off   = offAbsolute;
                pStream->iLine = i;
                if (offAbsolute > pStream->paLines[i].off + pStream->paLines[i].cch)
                    return pStream->rc = VERR_SEEK;
                break;
            }
        }
        AssertReturn(pStream->off != ~(size_t)0, pStream->rc = VERR_INTERNAL_ERROR_3);
    }
    else
    {
        pStream->off   = pStream->cb;
        pStream->iLine = pStream->cLines;
    }
    return VINF_SUCCESS;
}


/**
 * Seeks a number of bytes relative to the current stream position.
 *
 * @returns IPRT status code.
 * @retval  VERR_SEEK if the new stream position is the middle of an EOL marker.
 *          This is a temporary restriction.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   offRelative         The offset to seek to.  A negative offset
 *                              rewinds and positive one fast forwards the
 *                              stream.  Will quietly stop at the beginning and
 *                              end of the stream.
 */
int ScmStreamSeekRelative(PSCMSTREAM pStream, ssize_t offRelative)
{
    size_t offAbsolute;
    if (offRelative >= 0)
        offAbsolute = pStream->off + offRelative;
    else if ((size_t)-offRelative <= pStream->off)
        offAbsolute = pStream->off + offRelative;
    else
        offAbsolute = 0;
    return ScmStreamSeekAbsolute(pStream, offAbsolute);
}

/**
 * Seeks to a given line in the stream.
 *
 * @returns IPRT status code.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   iLine               The line to seek to.  If this is beyond the end
 *                              of the stream, the position is set to the end.
 */
int ScmStreamSeekByLine(PSCMSTREAM pStream, size_t iLine)
{
    AssertReturn(!pStream->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /* Must be fully delineated. (lazy bird) */
    if (RT_UNLIKELY(!pStream->fFullyLineated))
    {
        int rc = scmStreamLineate(pStream);
        if (RT_FAILURE(rc))
            return rc;
    }

    /* Ok, do the job. */
    if (iLine < pStream->cLines)
    {
        pStream->off   = pStream->paLines[iLine].off;
        pStream->iLine = iLine;
    }
    else
    {
        pStream->off   = pStream->cb;
        pStream->iLine = pStream->cLines;
    }
    return VINF_SUCCESS;
}

/**
 * Get a numbered line from the stream (changes the position).
 *
 * A line is always delimited by a LF character or the end of the stream.  The
 * delimiter is not included in returned line length, but instead returned via
 * the @a penmEol indicator.
 *
 * @returns Pointer to the first character in the line, not NULL terminated.
 *          NULL if the end of the stream has been reached or some problem
 *          occurred.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   iLine               The line to get (0-based).
 * @param   pcchLine            The length.
 * @param   penmEol             Where to return the end of line type indicator.
 */
static const char *ScmStreamGetLineByNo(PSCMSTREAM pStream, size_t iLine, size_t *pcchLine, PSCMEOL penmEol)
{
    AssertReturn(!pStream->fWriteOrRead, NULL);
    if (RT_FAILURE(pStream->rc))
        return NULL;

    /* Make sure it's fully delineated so we can use the index. */
    if (RT_UNLIKELY(!pStream->fFullyLineated))
    {
        int rc = scmStreamLineate(pStream);
        if (RT_FAILURE(rc))
            return NULL;
    }

    /* End of stream? */
    if (RT_UNLIKELY(iLine >= pStream->cLines))
    {
        pStream->off   = pStream->cb;
        pStream->iLine = pStream->cLines;
        return NULL;
    }

    /* Get the data. */
    const char *pchRet = &pStream->pch[pStream->paLines[iLine].off];
    *pcchLine          = pStream->paLines[iLine].cch;
    *penmEol           = pStream->paLines[iLine].enmEol;

    /* update the stream position. */
    pStream->off       = pStream->paLines[iLine].off + pStream->paLines[iLine].cch + pStream->paLines[iLine].enmEol;
    pStream->iLine     = iLine + 1;

    return pchRet;
}

/**
 * Get a line from the stream.
 *
 * A line is always delimited by a LF character or the end of the stream.  The
 * delimiter is not included in returned line length, but instead returned via
 * the @a penmEol indicator.
 *
 * @returns Pointer to the first character in the line, not NULL terminated.
 *          NULL if the end of the stream has been reached or some problem
 *          occurred.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   pcchLine            The length.
 * @param   penmEol             Where to return the end of line type indicator.
 */
static const char *ScmStreamGetLine(PSCMSTREAM pStream, size_t *pcchLine, PSCMEOL penmEol)
{
    /** @todo this doesn't work when pStream->off !=
     *        pStream->paLines[pStream->iLine-1].pff. */
    if (!pStream->fFullyLineated)
        return scmStreamGetLineInternal(pStream, pcchLine, penmEol);
    return ScmStreamGetLineByNo(pStream, pStream->iLine, pcchLine, penmEol);
}

/**
 * Reads @a cbToRead bytes into @a pvBuf.
 *
 * Will fail if end of stream is encountered before the entire read has been
 * completed.
 *
 * @returns IPRT status code.
 * @retval  VERR_EOF if there isn't @a cbToRead bytes left to read.  Stream
 *          position will be unchanged.
 *
 * @param   pStream             The stream.  Must be in read mode.
 * @param   pvBuf               The buffer to read into.
 * @param   cbToRead            The number of bytes to read.
 */
static int ScmStreamRead(PSCMSTREAM pStream, void *pvBuf, size_t cbToRead)
{
    AssertReturn(!pStream->fWriteOrRead, VERR_PERMISSION_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /* If there isn't enough stream left, fail already. */
    if (RT_UNLIKELY(pStream->cb - pStream->cb < cbToRead))
        return VERR_EOF;

    /* Copy the data and simply seek to the new stream position. */
    memcpy(pvBuf, &pStream->pch[pStream->off], cbToRead);
    return ScmStreamSeekAbsolute(pStream, pStream->off + cbToRead);
}

/**
 * Checks if the given line is empty or full of white space.
 *
 * @returns true if white space only, false if not (or if non-existant).
 * @param   pStream             The stream.  Must be in read mode.
 * @param   iLine               The line in question.
 */
static bool ScmStreamIsWhiteLine(PSCMSTREAM pStream, size_t iLine)
{
    SCMEOL      enmEol;
    size_t      cchLine;
    const char *pchLine = ScmStreamGetLineByNo(pStream, iLine, &cchLine, &enmEol);
    if (!pchLine)
        return false;
    while (cchLine && RT_C_IS_SPACE(*pchLine))
        pchLine++, cchLine--;
    return cchLine == 0;
}

/**
 * Try figure out the end of line style of the give stream.
 *
 * @returns Most likely end of line style.
 * @param   pStream             The stream.
 */
SCMEOL ScmStreamGetEol(PSCMSTREAM pStream)
{
    SCMEOL enmEol;
    if (pStream->cLines > 0)
        enmEol = pStream->paLines[0].enmEol;
    else if (pStream->cb == 0)
        enmEol = SCMEOL_NONE;
    else
    {
        const char *pchLF = (const char *)memchr(pStream->pch, '\n', pStream->cb);
        if (pchLF && pchLF != pStream->pch && pchLF[-1] == '\r')
            enmEol = SCMEOL_CRLF;
        else
            enmEol = SCMEOL_LF;
    }

    if (enmEol == SCMEOL_NONE)
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
        enmEol = SCMEOL_CRLF;
#else
        enmEol = SCMEOL_LF;
#endif
    return enmEol;
}

/**
 * Get the end of line indicator type for a line.
 *
 * @returns The EOL indicator.  If the line isn't found, the default EOL
 *          indicator is return.
 * @param   pStream             The stream.
 * @param   iLine               The line (0-base).
 */
SCMEOL ScmStreamGetEolByLine(PSCMSTREAM pStream, size_t iLine)
{
    SCMEOL enmEol;
    if (iLine < pStream->cLines)
        enmEol = pStream->paLines[iLine].enmEol;
    else
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
        enmEol = SCMEOL_CRLF;
#else
        enmEol = SCMEOL_LF;
#endif
    return enmEol;
}

/**
 * Appends a line to the stream.
 *
 * @returns IPRT status code.
 * @param   pStream             The stream.  Must be in write mode.
 * @param   pchLine             Pointer to the line.
 * @param   cchLine             Line length.
 * @param   enmEol              Which end of line indicator to use.
 */
int ScmStreamPutLine(PSCMSTREAM pStream, const char *pchLine, size_t cchLine, SCMEOL enmEol)
{
    AssertReturn(pStream->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /*
     * Make sure the previous line has a new-line indicator.
     */
    size_t off   = pStream->off;
    size_t iLine = pStream->iLine;
    if (RT_UNLIKELY(   iLine != 0
                    && pStream->paLines[iLine - 1].enmEol == SCMEOL_NONE))
    {
        AssertReturn(pStream->paLines[iLine].cch == 0, VERR_INTERNAL_ERROR_3);
        SCMEOL enmEol2 = enmEol != SCMEOL_NONE ? enmEol : ScmStreamGetEol(pStream);
        if (RT_UNLIKELY(off + cchLine + enmEol + enmEol2 > pStream->cbAllocated))
        {
            int rc = scmStreamGrowBuffer(pStream, cchLine + enmEol + enmEol2);
            if (RT_FAILURE(rc))
                return rc;
        }
        if (enmEol2 == SCMEOL_LF)
            pStream->pch[off++] = '\n';
        else
        {
            pStream->pch[off++] = '\r';
            pStream->pch[off++] = '\n';
        }
        pStream->paLines[iLine - 1].enmEol = enmEol2;
        pStream->paLines[iLine].off = off;
        pStream->off = off;
        pStream->cb  = off;
    }

    /*
     * Ensure we've got sufficient buffer space.
     */
    if (RT_UNLIKELY(off + cchLine + enmEol > pStream->cbAllocated))
    {
        int rc = scmStreamGrowBuffer(pStream, cchLine + enmEol);
        if (RT_FAILURE(rc))
            return rc;
    }

    /*
     * Add a line record.
     */
    if (RT_UNLIKELY(iLine + 1 >= pStream->cLinesAllocated))
    {
        int rc = scmStreamGrowLines(pStream, iLine);
        if (RT_FAILURE(rc))
            return rc;
    }

    pStream->paLines[iLine].cch    = off - pStream->paLines[iLine].off + cchLine;
    pStream->paLines[iLine].enmEol = enmEol;

    iLine++;
    pStream->cLines = iLine;
    pStream->iLine  = iLine;

    /*
     * Copy the line
     */
    memcpy(&pStream->pch[off], pchLine, cchLine);
    off += cchLine;
    if (enmEol == SCMEOL_LF)
        pStream->pch[off++] = '\n';
    else if (enmEol == SCMEOL_CRLF)
    {
        pStream->pch[off++] = '\r';
        pStream->pch[off++] = '\n';
    }
    pStream->off = off;
    pStream->cb  = off;

    /*
     * Start a new line.
     */
    pStream->paLines[iLine].off    = off;
    pStream->paLines[iLine].cch    = 0;
    pStream->paLines[iLine].enmEol = SCMEOL_NONE;

    return VINF_SUCCESS;
}

/**
 * Writes to the stream.
 *
 * @returns IPRT status code
 * @param   pStream             The stream.  Must be in write mode.
 * @param   pchBuf              What to write.
 * @param   cchBuf              How much to write.
 */
int ScmStreamWrite(PSCMSTREAM pStream, const char *pchBuf, size_t cchBuf)
{
    AssertReturn(pStream->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /*
     * Ensure we've got sufficient buffer space.
     */
    size_t off = pStream->off;
    if (RT_UNLIKELY(off + cchBuf > pStream->cbAllocated))
    {
        int rc = scmStreamGrowBuffer(pStream, cchBuf);
        if (RT_FAILURE(rc))
            return rc;
    }

    /*
     * Deal with the odd case where we've already pushed a line with SCMEOL_NONE.
     */
    size_t iLine = pStream->iLine;
    if (RT_UNLIKELY(   iLine > 0
                    && pStream->paLines[iLine - 1].enmEol == SCMEOL_NONE))
    {
        iLine--;
        pStream->cLines = iLine;
        pStream->iLine  = iLine;
    }

    /*
     * Deal with lines.
     */
    const char *pchLF = (const char *)memchr(pchBuf, '\n', cchBuf);
    if (!pchLF)
        pStream->paLines[iLine].cch += cchBuf;
    else
    {
        const char *pchLine = pchBuf;
        for (;;)
        {
            if (RT_UNLIKELY(iLine + 1 >= pStream->cLinesAllocated))
            {
                int rc = scmStreamGrowLines(pStream, iLine);
                if (RT_FAILURE(rc))
                {
                    iLine = pStream->iLine;
                    pStream->paLines[iLine].cch    = off - pStream->paLines[iLine].off;
                    pStream->paLines[iLine].enmEol = SCMEOL_NONE;
                    return rc;
                }
            }

            size_t cchLine = pchLF - pchLine;
            if (   cchLine
                ?  pchLF[-1] != '\r'
                :     !pStream->paLines[iLine].cch
                   || pStream->pch[pStream->paLines[iLine].off + pStream->paLines[iLine].cch - 1] != '\r')
                pStream->paLines[iLine].enmEol = SCMEOL_LF;
            else
            {
                pStream->paLines[iLine].enmEol = SCMEOL_CRLF;
                cchLine--;
            }
            pStream->paLines[iLine].cch += cchLine;

            iLine++;
            size_t offBuf = pchLF + 1 - pchBuf;
            pStream->paLines[iLine].off    = off + offBuf;
            pStream->paLines[iLine].cch    = 0;
            pStream->paLines[iLine].enmEol = SCMEOL_NONE;

            size_t cchLeft = cchBuf - offBuf;
            pchLF = (const char *)memchr(pchLF + 1, '\n', cchLeft);
            if (!pchLF)
            {
                pStream->paLines[iLine].cch = cchLeft;
                break;
            }
        }

        pStream->iLine  = iLine;
        pStream->cLines = iLine;
    }

    /*
     * Copy the data and update position and size.
     */
    memcpy(&pStream->pch[off], pchBuf, cchBuf);
    off += cchBuf;
    pStream->off = off;
    pStream->cb  = off;

    return VINF_SUCCESS;
}

/**
 * Write a character to the stream.
 *
 * @returns IPRT status code
 * @param   pStream             The stream.  Must be in write mode.
 * @param   pchBuf              What to write.
 * @param   cchBuf              How much to write.
 */
int ScmStreamPutCh(PSCMSTREAM pStream, char ch)
{
    AssertReturn(pStream->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pStream->rc))
        return pStream->rc;

    /*
     * Only deal with the simple cases here, use ScmStreamWrite for the
     * annoying stuff.
     */
    size_t off = pStream->off;
    if (   ch == '\n'
        || RT_UNLIKELY(off + 1 > pStream->cbAllocated))
        return ScmStreamWrite(pStream, &ch, 1);

    /*
     * Just append it.
     */
    pStream->pch[off] = ch;
    pStream->off = off + 1;
    pStream->paLines[pStream->iLine].cch++;

    return VINF_SUCCESS;
}

/**
 * Copies @a cLines from the @a pSrc stream onto the @a pDst stream.
 *
 * The stream positions will be used and changed in both streams.
 *
 * @returns IPRT status code.
 * @param   pDst                The destination stream.  Must be in write mode.
 * @param   cLines              The number of lines.  (0 is accepted.)
 * @param   pSrc                The source stream.  Must be in read mode.
 */
int ScmStreamCopyLines(PSCMSTREAM pDst, PSCMSTREAM pSrc, size_t cLines)
{
    AssertReturn(pDst->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pDst->rc))
        return pDst->rc;

    AssertReturn(!pSrc->fWriteOrRead, VERR_ACCESS_DENIED);
    if (RT_FAILURE(pSrc->rc))
        return pSrc->rc;

    while (cLines-- > 0)
    {
        SCMEOL      enmEol;
        size_t      cchLine;
        const char *pchLine = ScmStreamGetLine(pSrc, &cchLine, &enmEol);
        if (!pchLine)
            return pDst->rc = (RT_FAILURE(pSrc->rc) ? pSrc->rc : VERR_EOF);

        int rc = ScmStreamPutLine(pDst, pchLine, cchLine, enmEol);
        if (RT_FAILURE(rc))
            return rc;
    }

    return VINF_SUCCESS;
}

/* -=-=-=-=-=- diff -=-=-=-=-=- */


/**
 * Prints a range of lines with a prefix.
 *
 * @param   pState              The diff state.
 * @param   chPrefix            The prefix.
 * @param   pStream             The stream to get the lines from.
 * @param   iLine               The first line.
 * @param   cLines              The number of lines.
 */
static void scmDiffPrintLines(PSCMDIFFSTATE pState, char chPrefix, PSCMSTREAM pStream, size_t iLine, size_t cLines)
{
    while (cLines-- > 0)
    {
        SCMEOL      enmEol;
        size_t      cchLine;
        const char *pchLine = ScmStreamGetLineByNo(pStream, iLine, &cchLine, &enmEol);

        RTStrmPutCh(pState->pDiff, chPrefix);
        if (pchLine && cchLine)
        {
            if (!pState->fSpecialChars)
                RTStrmWrite(pState->pDiff, pchLine, cchLine);
            else
            {
                size_t      offVir   = 0;
                const char *pchStart = pchLine;
                const char *pchTab   = (const char *)memchr(pchLine, '\t', cchLine);
                while (pchTab)
                {
                    RTStrmWrite(pState->pDiff, pchStart, pchTab - pchStart);
                    offVir += pchTab - pchStart;

                    size_t cchTab = pState->cchTab - offVir % pState->cchTab;
                    switch (cchTab)
                    {
                        case 1: RTStrmPutStr(pState->pDiff, "."); break;
                        case 2: RTStrmPutStr(pState->pDiff, ".."); break;
                        case 3: RTStrmPutStr(pState->pDiff, "[T]"); break;
                        case 4: RTStrmPutStr(pState->pDiff, "[TA]"); break;
                        case 5: RTStrmPutStr(pState->pDiff, "[TAB]"); break;
                        default: RTStrmPrintf(pState->pDiff, "[TAB%.*s]", cchTab - 5, g_szTabSpaces); break;
                    }
                    offVir += cchTab;

                    /* next */
                    pchStart = pchTab + 1;
                    pchTab = (const char *)memchr(pchStart, '\t', cchLine - (pchStart - pchLine));
                }
                size_t cchLeft = cchLine - (pchStart - pchLine);
                if (cchLeft)
                    RTStrmWrite(pState->pDiff, pchStart, cchLeft);
            }
        }

        if (!pState->fSpecialChars)
            RTStrmPutCh(pState->pDiff, '\n');
        else if (enmEol == SCMEOL_LF)
            RTStrmPutStr(pState->pDiff, "[LF]\n");
        else if (enmEol == SCMEOL_CRLF)
            RTStrmPutStr(pState->pDiff, "[CRLF]\n");
        else
            RTStrmPutStr(pState->pDiff, "[NONE]\n");

        iLine++;
    }
}


/**
 * Reports a difference and propels the streams to the lines following the
 * resync.
 *
 *
 * @returns New pState->cDiff value (just to return something).
 * @param   pState              The diff state.  The cDiffs member will be
 *                              incremented.
 * @param   cMatches            The resync length.
 * @param   iLeft               Where the difference starts on the left side.
 * @param   cLeft               How long it is on this side.  ~(size_t)0 is used
 *                              to indicate that it goes all the way to the end.
 * @param   iRight              Where the difference starts on the right side.
 * @param   cRight              How long it is.
 */
static size_t scmDiffReport(PSCMDIFFSTATE pState, size_t cMatches,
                            size_t iLeft, size_t cLeft,
                            size_t iRight, size_t cRight)
{
    /*
     * Adjust the input.
     */
    if (cLeft == ~(size_t)0)
    {
        size_t c = ScmStreamCountLines(pState->pLeft);
        if (c >= iLeft)
            cLeft = c - iLeft;
        else
        {
            iLeft = c;
            cLeft = 0;
        }
    }

    if (cRight == ~(size_t)0)
    {
        size_t c = ScmStreamCountLines(pState->pRight);
        if (c >= iRight)
            cRight = c - iRight;
        else
        {
            iRight = c;
            cRight = 0;
        }
    }

    /*
     * Print header if it's the first difference
     */
    if (!pState->cDiffs)
        RTStrmPrintf(pState->pDiff, "diff %s %s\n", pState->pszFilename, pState->pszFilename);

    /*
     * Emit the change description.
     */
    char ch = cLeft == 0
            ? 'a'
            : cRight == 0
            ? 'd'
            : 'c';
    if (cLeft > 1 && cRight > 1)
        RTStrmPrintf(pState->pDiff, "%zu,%zu%c%zu,%zu\n", iLeft + 1, iLeft + cLeft, ch, iRight + 1, iRight + cRight);
    else if (cLeft > 1)
        RTStrmPrintf(pState->pDiff, "%zu,%zu%c%zu\n",     iLeft + 1, iLeft + cLeft, ch, iRight + 1);
    else if (cRight > 1)
        RTStrmPrintf(pState->pDiff, "%zu%c%zu,%zu\n",     iLeft + 1,                ch, iRight + 1, iRight + cRight);
    else
        RTStrmPrintf(pState->pDiff, "%zu%c%zu\n",         iLeft + 1,                ch, iRight + 1);

    /*
     * And the lines.
     */
    if (cLeft)
        scmDiffPrintLines(pState, '<', pState->pLeft, iLeft, cLeft);
    if (cLeft && cRight)
        RTStrmPrintf(pState->pDiff, "---\n");
    if (cRight)
        scmDiffPrintLines(pState, '>', pState->pRight, iRight, cRight);

    /*
     * Reposition the streams (safely ignores return value).
     */
    ScmStreamSeekByLine(pState->pLeft,  iLeft  + cLeft  + cMatches);
    ScmStreamSeekByLine(pState->pRight, iRight + cRight + cMatches);

    pState->cDiffs++;
    return pState->cDiffs;
}

/**
 * Helper for scmDiffCompare that takes care of trailing spaces and stuff
 * like that.
 */
static bool scmDiffCompareSlow(PSCMDIFFSTATE pState,
                               const char *pchLeft,  size_t cchLeft,  SCMEOL enmEolLeft,
                               const char *pchRight, size_t cchRight, SCMEOL enmEolRight)
{
    if (pState->fIgnoreTrailingWhite)
    {
        while (cchLeft > 0 && RT_C_IS_SPACE(pchLeft[cchLeft - 1]))
            cchLeft--;
        while (cchRight > 0 && RT_C_IS_SPACE(pchRight[cchRight - 1]))
            cchRight--;
    }

    if (pState->fIgnoreLeadingWhite)
    {
        while (cchLeft > 0 && RT_C_IS_SPACE(*pchLeft))
            pchLeft++, cchLeft--;
        while (cchRight > 0 && RT_C_IS_SPACE(*pchRight))
            pchRight++, cchRight--;
    }

    if (   cchLeft != cchRight
        || (enmEolLeft != enmEolRight && !pState->fIgnoreEol)
        || memcmp(pchLeft, pchRight, cchLeft))
        return false;
    return true;
}

/**
 * Compare two lines.
 *
 * @returns true if the are equal, false if not.
 */
DECLINLINE(bool) scmDiffCompare(PSCMDIFFSTATE pState,
                                const char *pchLeft,  size_t cchLeft,  SCMEOL enmEolLeft,
                                const char *pchRight, size_t cchRight, SCMEOL enmEolRight)
{
    if (   cchLeft != cchRight
        || (enmEolLeft != enmEolRight && !pState->fIgnoreEol)
        || memcmp(pchLeft, pchRight, cchLeft))
    {
        if (   pState->fIgnoreTrailingWhite
            || pState->fIgnoreTrailingWhite)
            return scmDiffCompareSlow(pState,
                                      pchLeft, cchLeft, enmEolLeft,
                                      pchRight, cchRight, enmEolRight);
        return false;
    }
    return true;
}

/**
 * Compares two sets of lines from the two files.
 *
 * @returns true if they matches, false if they don't.
 * @param   pState              The diff state.
 * @param   iLeft               Where to start in the left stream.
 * @param   iRight              Where to start in the right stream.
 * @param   cLines              How many lines to compare.
 */
static bool scmDiffCompareLines(PSCMDIFFSTATE pState, size_t iLeft, size_t iRight, size_t cLines)
{
    for (size_t iLine = 0; iLine < cLines; iLine++)
    {
        SCMEOL      enmEolLeft;
        size_t      cchLeft;
        const char *pchLeft  = ScmStreamGetLineByNo(pState->pLeft,  iLeft + iLine,  &cchLeft,  &enmEolLeft);

        SCMEOL      enmEolRight;
        size_t      cchRight;
        const char *pchRight = ScmStreamGetLineByNo(pState->pRight, iRight + iLine, &cchRight, &enmEolRight);

        if (!scmDiffCompare(pState, pchLeft, cchLeft, enmEolLeft, pchRight, cchRight, enmEolRight))
            return false;
    }
    return true;
}


/**
 * Resynchronize the two streams and reports the difference.
 *
 * Upon return, the streams will be positioned after the block of @a cMatches
 * lines where it resynchronized them.
 *
 * @returns pState->cDiffs (just so we can use it in a return statement).
 * @param   pState              The state.
 * @param   cMatches            The number of lines that needs to match for the
 *                              stream to be considered synchronized again.
 */
static size_t scmDiffSynchronize(PSCMDIFFSTATE pState, size_t cMatches)
{
    size_t const iStartLeft  = ScmStreamTellLine(pState->pLeft)  - 1;
    size_t const iStartRight = ScmStreamTellLine(pState->pRight) - 1;
    Assert(cMatches > 0);

    /*
     * Compare each new line from each of the streams will all the preceding
     * ones, including iStartLeft/Right.
     */
    for (size_t iRange = 1; ; iRange++)
    {
        /*
         * Get the next line in the left stream and compare it against all the
         * preceding lines on the right side.
         */
        SCMEOL      enmEol;
        size_t      cchLine;
        const char *pchLine = ScmStreamGetLineByNo(pState->pLeft, iStartLeft + iRange, &cchLine, &enmEol);
        if (!pchLine)
            return scmDiffReport(pState, 0, iStartLeft, ~(size_t)0, iStartRight, ~(size_t)0);

        for (size_t iRight = cMatches - 1; iRight < iRange; iRight++)
        {
            SCMEOL      enmEolRight;
            size_t      cchRight;
            const char *pchRight = ScmStreamGetLineByNo(pState->pRight, iStartRight + iRight,
                                                        &cchRight, &enmEolRight);
            if (   scmDiffCompare(pState, pchLine, cchLine, enmEol, pchRight, cchRight, enmEolRight)
                && scmDiffCompareLines(pState,
                                       iStartLeft  + iRange + 1 - cMatches,
                                       iStartRight + iRight + 1 - cMatches,
                                       cMatches - 1)
               )
                return scmDiffReport(pState, cMatches,
                                     iStartLeft,  iRange + 1 - cMatches,
                                     iStartRight, iRight + 1 - cMatches);
        }

        /*
         * Get the next line in the right stream and compare it against all the
         * lines on the right side.
         */
        pchLine = ScmStreamGetLineByNo(pState->pRight, iStartRight + iRange, &cchLine, &enmEol);
        if (!pchLine)
            return scmDiffReport(pState, 0, iStartLeft, ~(size_t)0, iStartRight, ~(size_t)0);

        for (size_t iLeft = cMatches - 1; iLeft <= iRange; iLeft++)
        {
            SCMEOL      enmEolLeft;
            size_t      cchLeft;
            const char *pchLeft = ScmStreamGetLineByNo(pState->pLeft, iStartLeft + iLeft,
                                                       &cchLeft, &enmEolLeft);
            if (    scmDiffCompare(pState, pchLeft, cchLeft, enmEolLeft, pchLine, cchLine, enmEol)
                && scmDiffCompareLines(pState,
                                       iStartLeft  + iLeft  + 1 - cMatches,
                                       iStartRight + iRange + 1 - cMatches,
                                       cMatches - 1)
               )
                return scmDiffReport(pState, cMatches,
                                     iStartLeft,  iLeft  + 1 - cMatches,
                                     iStartRight, iRange + 1 - cMatches);
        }
    }
}

/**
 * Creates a diff of the changes between the streams @a pLeft and @a pRight.
 *
 * This currently only implements the simplest diff format, so no contexts.
 *
 * Also, note that we won't detect differences in the final newline of the
 * streams.
 *
 * @returns The number of differences.
 * @param   pszFilename         The filename.
 * @param   pLeft               The left side stream.
 * @param   pRight              The right side stream.
 * @param   fIgnoreEol          Whether to ignore end of line markers.
 * @param   fIgnoreLeadingWhite Set if leading white space should be ignored.
 * @param   fIgnoreTrailingWhite  Set if trailing white space should be ignored.
 * @param   fSpecialChars       Whether to print special chars in a human
 *                              readable form or not.
 * @param   cchTab              The tab size.
 * @param   pDiff               Where to write the diff.
 */
size_t ScmDiffStreams(const char *pszFilename, PSCMSTREAM pLeft, PSCMSTREAM pRight, bool fIgnoreEol,
                      bool fIgnoreLeadingWhite, bool fIgnoreTrailingWhite, bool fSpecialChars,
                      size_t cchTab, PRTSTREAM pDiff)
{
#ifdef RT_STRICT
    ScmStreamCheckItegrity(pLeft);
    ScmStreamCheckItegrity(pRight);
#endif

    /*
     * Set up the diff state.
     */
    SCMDIFFSTATE State;
    State.cDiffs                = 0;
    State.pszFilename           = pszFilename;
    State.pLeft                 = pLeft;
    State.pRight                = pRight;
    State.fIgnoreEol            = fIgnoreEol;
    State.fIgnoreLeadingWhite   = fIgnoreLeadingWhite;
    State.fIgnoreTrailingWhite  = fIgnoreTrailingWhite;
    State.fSpecialChars         = fSpecialChars;
    State.cchTab                = cchTab;
    State.pDiff                 = pDiff;

    /*
     * Compare them line by line.
     */
    ScmStreamRewindForReading(pLeft);
    ScmStreamRewindForReading(pRight);
    const char *pchLeft;
    const char *pchRight;

    for (;;)
    {
        SCMEOL  enmEolLeft;
        size_t  cchLeft;
        pchLeft  = ScmStreamGetLine(pLeft,  &cchLeft,  &enmEolLeft);

        SCMEOL  enmEolRight;
        size_t  cchRight;
        pchRight = ScmStreamGetLine(pRight, &cchRight, &enmEolRight);
        if (!pchLeft || !pchRight)
            break;

        if (!scmDiffCompare(&State, pchLeft, cchLeft, enmEolLeft, pchRight, cchRight, enmEolRight))
            scmDiffSynchronize(&State, 3);
    }

    /*
     * Deal with any remaining differences.
     */
    if (pchLeft)
        scmDiffReport(&State, 0, ScmStreamTellLine(pLeft) - 1, ~(size_t)0, ScmStreamTellLine(pRight), 0);
    else if (pchRight)
        scmDiffReport(&State, 0, ScmStreamTellLine(pLeft), 0, ScmStreamTellLine(pRight) - 1, ~(size_t)0);

    /*
     * Report any errors.
     */
    if (RT_FAILURE(ScmStreamGetStatus(pLeft)))
        RTMsgError("Left diff stream error: %Rrc\n", ScmStreamGetStatus(pLeft));
    if (RT_FAILURE(ScmStreamGetStatus(pRight)))
        RTMsgError("Right diff stream error: %Rrc\n", ScmStreamGetStatus(pRight));

    return State.cDiffs;
}



/* -=-=-=-=-=- settings -=-=-=-=-=- */

/**
 * Init a settings structure with settings from @a pSrc.
 *
 * @returns IPRT status code
 * @param   pSettings           The settings.
 * @param   pSrc                The source settings.
 */
static int scmSettingsBaseInitAndCopy(PSCMSETTINGSBASE pSettings, PCSCMSETTINGSBASE pSrc)
{
    *pSettings = *pSrc;

    int rc = RTStrDupEx(&pSettings->pszFilterFiles, pSrc->pszFilterFiles);
    if (RT_SUCCESS(rc))
    {
        rc = RTStrDupEx(&pSettings->pszFilterOutFiles, pSrc->pszFilterOutFiles);
        if (RT_SUCCESS(rc))
        {
            rc = RTStrDupEx(&pSettings->pszFilterOutDirs, pSrc->pszFilterOutDirs);
            if (RT_SUCCESS(rc))
                return VINF_SUCCESS;

            RTStrFree(pSettings->pszFilterOutFiles);
        }
        RTStrFree(pSettings->pszFilterFiles);
    }

    pSettings->pszFilterFiles = NULL;
    pSettings->pszFilterOutFiles = NULL;
    pSettings->pszFilterOutDirs = NULL;
    return rc;
}

/**
 * Init a settings structure.
 *
 * @returns IPRT status code
 * @param   pSettings           The settings.
 */
static int scmSettingsBaseInit(PSCMSETTINGSBASE pSettings)
{
    return scmSettingsBaseInitAndCopy(pSettings, &g_Defaults);
}

/**
 * Deletes the settings, i.e. free any dynamically allocated content.
 *
 * @param   pSettings           The settings.
 */
static void scmSettingsBaseDelete(PSCMSETTINGSBASE pSettings)
{
    if (pSettings)
    {
        Assert(pSettings->cchTab != ~(unsigned)0);
        pSettings->cchTab = ~(unsigned)0;

        RTStrFree(pSettings->pszFilterFiles);
        pSettings->pszFilterFiles = NULL;

        RTStrFree(pSettings->pszFilterOutFiles);
        pSettings->pszFilterOutFiles = NULL;

        RTStrFree(pSettings->pszFilterOutDirs);
        pSettings->pszFilterOutDirs = NULL;
    }
}


/**
 * Processes a RTGetOpt result.
 *
 * @retval  VINF_SUCCESS if handled.
 * @retval  VERR_OUT_OF_RANGE if the option value was out of range.
 * @retval  VERR_GETOPT_UNKNOWN_OPTION if the option was not recognized.
 *
 * @param   pSettings           The settings to change.
 * @param   rc                  The RTGetOpt return value.
 * @param   pValueUnion         The RTGetOpt value union.
 */
static int scmSettingsBaseHandleOpt(PSCMSETTINGSBASE pSettings, int rc, PRTGETOPTUNION pValueUnion)
{
    switch (rc)
    {
        case SCMOPT_CONVERT_EOL:
            pSettings->fConvertEol = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_CONVERT_EOL:
            pSettings->fConvertEol = false;
            return VINF_SUCCESS;

        case SCMOPT_CONVERT_TABS:
            pSettings->fConvertTabs = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_CONVERT_TABS:
            pSettings->fConvertTabs = false;
            return VINF_SUCCESS;

        case SCMOPT_FORCE_FINAL_EOL:
            pSettings->fForceFinalEol = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_FORCE_FINAL_EOL:
            pSettings->fForceFinalEol = false;
            return VINF_SUCCESS;

        case SCMOPT_FORCE_TRAILING_LINE:
            pSettings->fForceTrailingLine = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_FORCE_TRAILING_LINE:
            pSettings->fForceTrailingLine = false;
            return VINF_SUCCESS;

        case SCMOPT_STRIP_TRAILING_BLANKS:
            pSettings->fStripTrailingBlanks = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_STRIP_TRAILING_BLANKS:
            pSettings->fStripTrailingBlanks = false;
            return VINF_SUCCESS;

        case SCMOPT_STRIP_TRAILING_LINES:
            pSettings->fStripTrailingLines = true;
            return VINF_SUCCESS;
        case SCMOPT_NO_STRIP_TRAILING_LINES:
            pSettings->fStripTrailingLines = false;
            return VINF_SUCCESS;

        case SCMOPT_ONLY_SVN_DIRS:
            pSettings->fOnlySvnDirs = true;
            return VINF_SUCCESS;
        case SCMOPT_NOT_ONLY_SVN_DIRS:
            pSettings->fOnlySvnDirs = false;
            return VINF_SUCCESS;

        case SCMOPT_ONLY_SVN_FILES:
            pSettings->fOnlySvnFiles = true;
            return VINF_SUCCESS;
        case SCMOPT_NOT_ONLY_SVN_FILES:
            pSettings->fOnlySvnFiles = false;
            return VINF_SUCCESS;

        case SCMOPT_SET_SVN_EOL:
            pSettings->fSetSvnEol = true;
            return VINF_SUCCESS;
        case SCMOPT_DONT_SET_SVN_EOL:
            pSettings->fSetSvnEol = false;
            return VINF_SUCCESS;

        case SCMOPT_SET_SVN_EXECUTABLE:
            pSettings->fSetSvnExecutable = true;
            return VINF_SUCCESS;
        case SCMOPT_DONT_SET_SVN_EXECUTABLE:
            pSettings->fSetSvnExecutable = false;
            return VINF_SUCCESS;

        case SCMOPT_SET_SVN_KEYWORDS:
            pSettings->fSetSvnKeywords = true;
            return VINF_SUCCESS;
        case SCMOPT_DONT_SET_SVN_KEYWORDS:
            pSettings->fSetSvnKeywords = false;
            return VINF_SUCCESS;

        case SCMOPT_TAB_SIZE:
            if (   pValueUnion->u8 < 1
                || pValueUnion->u8 >= RT_ELEMENTS(g_szTabSpaces))
            {
                RTMsgError("Invalid tab size: %u - must be in {1..%u}\n",
                           pValueUnion->u8, RT_ELEMENTS(g_szTabSpaces) - 1);
                return VERR_OUT_OF_RANGE;
            }
            pSettings->cchTab = pValueUnion->u8;
            return VINF_SUCCESS;

        case SCMOPT_FILTER_OUT_DIRS:
        case SCMOPT_FILTER_FILES:
        case SCMOPT_FILTER_OUT_FILES:
        {
            char **ppsz = NULL;
            switch (rc)
            {
                case SCMOPT_FILTER_OUT_DIRS:    ppsz = &pSettings->pszFilterOutDirs; break;
                case SCMOPT_FILTER_FILES:       ppsz = &pSettings->pszFilterFiles; break;
                case SCMOPT_FILTER_OUT_FILES:   ppsz = &pSettings->pszFilterOutFiles; break;
            }

            /*
             * An empty string zaps the current list.
             */
            if (!*pValueUnion->psz)
                return RTStrATruncate(ppsz, 0);

            /*
             * Non-empty strings are appended to the pattern list.
             *
             * Strip leading and trailing pattern separators before attempting
             * to append it.  If it's just separators, don't do anything.
             */
            const char *pszSrc = pValueUnion->psz;
            while (*pszSrc == '|')
                pszSrc++;
            size_t cchSrc = strlen(pszSrc);
            while (cchSrc > 0 && pszSrc[cchSrc - 1] == '|')
                cchSrc--;
            if (!cchSrc)
                return VINF_SUCCESS;

            return RTStrAAppendExN(ppsz, 2,
                                   "|", *ppsz && **ppsz ? 1 : 0,
                                   pszSrc, cchSrc);
        }

        default:
            return VERR_GETOPT_UNKNOWN_OPTION;
    }
}

/**
 * Parses an option string.
 *
 * @returns IPRT status code.
 * @param   pBase               The base settings structure to apply the options
 *                              to.
 * @param   pszOptions          The options to parse.
 */
static int scmSettingsBaseParseString(PSCMSETTINGSBASE pBase, const char *pszLine)
{
    int    cArgs;
    char **papszArgs;
    int rc = RTGetOptArgvFromString(&papszArgs, &cArgs, pszLine, NULL);
    if (RT_SUCCESS(rc))
    {
        RTGETOPTUNION   ValueUnion;
        RTGETOPTSTATE   GetOptState;
        rc = RTGetOptInit(&GetOptState, cArgs, papszArgs, &g_aScmOpts[0], RT_ELEMENTS(g_aScmOpts), 0, 0 /*fFlags*/);
        if (RT_SUCCESS(rc))
        {
            while ((rc = RTGetOpt(&GetOptState, &ValueUnion)) != 0)
            {
                rc = scmSettingsBaseHandleOpt(pBase, rc, &ValueUnion);
                if (RT_FAILURE(rc))
                    break;
            }
        }
        RTGetOptArgvFree(papszArgs);
    }

    return rc;
}

/**
 * Parses an unterminated option string.
 *
 * @returns IPRT status code.
 * @param   pBase               The base settings structure to apply the options
 *                              to.
 * @param   pchLine             The line.
 * @param   cchLine             The line length.
 */
static int scmSettingsBaseParseStringN(PSCMSETTINGSBASE pBase, const char *pchLine, size_t cchLine)
{
    char *pszLine = RTStrDupN(pchLine, cchLine);
    if (!pszLine)
        return VERR_NO_MEMORY;
    int rc = scmSettingsBaseParseString(pBase, pszLine);
    RTStrFree(pszLine);
    return rc;
}

/**
 * Verifies the options string.
 *
 * @returns IPRT status code.
 * @param   pszOptions          The options to verify .
 */
static int scmSettingsBaseVerifyString(const char *pszOptions)
{
    SCMSETTINGSBASE Base;
    int rc = scmSettingsBaseInit(&Base);
    if (RT_SUCCESS(rc))
    {
        rc = scmSettingsBaseParseString(&Base, pszOptions);
        scmSettingsBaseDelete(&Base);
    }
    return rc;
}

/**
 * Loads settings found in editor and SCM settings directives within the
 * document (@a pStream).
 *
 * @returns IPRT status code.
 * @param   pBase               The settings base to load settings into.
 * @param   pStream             The stream to scan for settings directives.
 */
static int scmSettingsBaseLoadFromDocument(PSCMSETTINGSBASE pBase, PSCMSTREAM pStream)
{
    /** @todo Editor and SCM settings directives in documents.  */
    return VINF_SUCCESS;
}

/**
 * Creates a new settings file struct, cloning @a pSettings.
 *
 * @returns IPRT status code.
 * @param   ppSettings          Where to return the new struct.
 * @param   pSettingsBase       The settings to inherit from.
 */
static int scmSettingsCreate(PSCMSETTINGS *ppSettings, PCSCMSETTINGSBASE pSettingsBase)
{
    PSCMSETTINGS pSettings = (PSCMSETTINGS)RTMemAlloc(sizeof(*pSettings));
    if (!pSettings)
        return VERR_NO_MEMORY;
    int rc = scmSettingsBaseInitAndCopy(&pSettings->Base, pSettingsBase);
    if (RT_SUCCESS(rc))
    {
        pSettings->pDown   = NULL;
        pSettings->pUp     = NULL;
        pSettings->paPairs = NULL;
        pSettings->cPairs  = 0;
        *ppSettings = pSettings;
        return VINF_SUCCESS;
    }
    RTMemFree(pSettings);
    return rc;
}

/**
 * Destroys a settings structure.
 *
 * @param   pSettings           The settings structure to destroy.  NULL is OK.
 */
static void scmSettingsDestroy(PSCMSETTINGS pSettings)
{
    if (pSettings)
    {
        scmSettingsBaseDelete(&pSettings->Base);
        for (size_t i = 0; i < pSettings->cPairs; i++)
        {
            RTStrFree(pSettings->paPairs[i].pszPattern);
            RTStrFree(pSettings->paPairs[i].pszOptions);
            pSettings->paPairs[i].pszPattern = NULL;
            pSettings->paPairs[i].pszOptions = NULL;
        }
        RTMemFree(pSettings->paPairs);
        pSettings->paPairs = NULL;
        RTMemFree(pSettings);
    }
}

/**
 * Adds a pattern/options pair to the settings structure.
 *
 * @returns IPRT status code.
 * @param   pSettings           The settings.
 * @param   pchLine             The line containing the unparsed pair.
 * @param   cchLine             The length of the line.
 */
static int scmSettingsAddPair(PSCMSETTINGS pSettings, const char *pchLine, size_t cchLine)
{
    /*
     * Split the string.
     */
    const char *pchOptions = (const char *)memchr(pchLine, ':', cchLine);
    if (!pchOptions)
        return VERR_INVALID_PARAMETER;
    size_t cchPattern = pchOptions - pchLine;
    size_t cchOptions = cchLine - cchPattern - 1;
    pchOptions++;

    /* strip spaces everywhere */
    while (cchPattern > 0 && RT_C_IS_SPACE(pchLine[cchPattern - 1]))
        cchPattern--;
    while (cchPattern > 0 && RT_C_IS_SPACE(*pchLine))
        cchPattern--, pchLine++;

    while (cchOptions > 0 && RT_C_IS_SPACE(pchOptions[cchOptions - 1]))
        cchOptions--;
    while (cchOptions > 0 && RT_C_IS_SPACE(*pchOptions))
        cchOptions--, pchOptions++;

    /* Quietly ignore empty patterns and empty options. */
    if (!cchOptions || !cchPattern)
        return VINF_SUCCESS;

    /*
     * Add the pair and verify the option string.
     */
    uint32_t iPair = pSettings->cPairs;
    if ((iPair % 32) == 0)
    {
        void *pvNew = RTMemRealloc(pSettings->paPairs, (iPair + 32) * sizeof(pSettings->paPairs[0]));
        if (!pvNew)
            return VERR_NO_MEMORY;
        pSettings->paPairs = (PSCMPATRNOPTPAIR)pvNew;
    }

    pSettings->paPairs[iPair].pszPattern = RTStrDupN(pchLine, cchPattern);
    pSettings->paPairs[iPair].pszOptions = RTStrDupN(pchOptions, cchOptions);
    int rc;
    if (   pSettings->paPairs[iPair].pszPattern
        && pSettings->paPairs[iPair].pszOptions)
        rc = scmSettingsBaseVerifyString(pSettings->paPairs[iPair].pszOptions);
    else
        rc = VERR_NO_MEMORY;
    if (RT_SUCCESS(rc))
        pSettings->cPairs = iPair + 1;
    else
    {
        RTStrFree(pSettings->paPairs[iPair].pszPattern);
        RTStrFree(pSettings->paPairs[iPair].pszOptions);
    }
    return rc;
}

/**
 * Loads in the settings from @a pszFilename.
 *
 * @returns IPRT status code.
 * @param   pSettings           Where to load the settings file.
 * @param   pszFilename         The file to load.
 */
static int scmSettingsLoadFile(PSCMSETTINGS pSettings, const char *pszFilename)
{
    SCMSTREAM Stream;
    int rc = ScmStreamInitForReading(&Stream, pszFilename);
    if (RT_FAILURE(rc))
    {
        RTMsgError("%s: ScmStreamInitForReading -> %Rrc\n", pszFilename, rc);
        return rc;
    }

    SCMEOL      enmEol;
    const char *pchLine;
    size_t      cchLine;
    while ((pchLine = ScmStreamGetLine(&Stream, &cchLine, &enmEol)) != NULL)
    {
        /* Ignore leading spaces. */
        while (cchLine > 0 && RT_C_IS_SPACE(*pchLine))
            pchLine++, cchLine--;

        /* Ignore empty lines and comment lines. */
        if (cchLine < 1 || *pchLine == '#')
            continue;

        /* What kind of line is it? */
        const char *pchColon = (const char *)memchr(pchLine, ':', cchLine);
        if (pchColon)
            rc = scmSettingsAddPair(pSettings, pchLine, cchLine);
        else
            rc = scmSettingsBaseParseStringN(&pSettings->Base, pchLine, cchLine);
        if (RT_FAILURE(rc))
        {
            RTMsgError("%s:%d: %Rrc\n", pszFilename, ScmStreamTellLine(&Stream), rc);
            break;
        }
    }

    if (RT_SUCCESS(rc))
    {
        rc = ScmStreamGetStatus(&Stream);
        if (RT_FAILURE(rc))
            RTMsgError("%s: ScmStreamGetStatus- > %Rrc\n", pszFilename, rc);
    }

    ScmStreamDelete(&Stream);
    return rc;
}

/**
 * Parse the specified settings file creating a new settings struct from it.
 *
 * @returns IPRT status code
 * @param   ppSettings          Where to return the new settings.
 * @param   pszFilename         The file to parse.
 * @param   pSettingsBase       The base settings we inherit from.
 */
static int scmSettingsCreateFromFile(PSCMSETTINGS *ppSettings, const char *pszFilename, PCSCMSETTINGSBASE pSettingsBase)
{
    PSCMSETTINGS pSettings;
    int rc = scmSettingsCreate(&pSettings, pSettingsBase);
    if (RT_SUCCESS(rc))
    {
        rc = scmSettingsLoadFile(pSettings, pszFilename);
        if (RT_SUCCESS(rc))
        {
            *ppSettings = pSettings;
            return VINF_SUCCESS;
        }

        scmSettingsDestroy(pSettings);
    }
    *ppSettings = NULL;
    return rc;
}


/**
 * Create an initial settings structure when starting processing a new file or
 * directory.
 *
 * This will look for .scm-settings files from the root and down to the
 * specified directory, combining them into the returned settings structure.
 *
 * @returns IPRT status code.
 * @param   ppSettings          Where to return the pointer to the top stack
 *                              object.
 * @param   pBaseSettings       The base settings we inherit from (globals
 *                              typically).
 * @param   pszPath             The absolute path to the new directory or file.
 */
static int scmSettingsCreateForPath(PSCMSETTINGS *ppSettings, PCSCMSETTINGSBASE pBaseSettings, const char *pszPath)
{
    *ppSettings = NULL;                 /* try shut up gcc. */

    /*
     * We'll be working with a stack copy of the path.
     */
    char    szFile[RTPATH_MAX];
    size_t  cchDir = strlen(pszPath);
    if (cchDir >= sizeof(szFile) - sizeof(SCM_SETTINGS_FILENAME))
        return VERR_FILENAME_TOO_LONG;

    /*
     * Create the bottom-most settings.
     */
    PSCMSETTINGS pSettings;
    int rc = scmSettingsCreate(&pSettings, pBaseSettings);
    if (RT_FAILURE(rc))
        return rc;

    /*
     * Enumerate the path components from the root and down. Load any setting
     * files we find.
     */
    size_t cComponents = RTPathCountComponents(pszPath);
    for (size_t i = 1; i <= cComponents; i++)
    {
        rc = RTPathCopyComponents(szFile, sizeof(szFile), pszPath, i);
        if (RT_SUCCESS(rc))
            rc = RTPathAppend(szFile, sizeof(szFile), SCM_SETTINGS_FILENAME);
        if (RT_FAILURE(rc))
            break;
        if (RTFileExists(szFile))
        {
            rc = scmSettingsLoadFile(pSettings, szFile);
            if (RT_FAILURE(rc))
                break;
        }
    }

    if (RT_SUCCESS(rc))
        *ppSettings = pSettings;
    else
        scmSettingsDestroy(pSettings);
    return rc;
}

/**
 * Pushes a new settings set onto the stack.
 *
 * @param   ppSettingsStack     The pointer to the pointer to the top stack
 *                              element.  This will be used as input and output.
 * @param   pSettings           The settings to push onto the stack.
 */
static void scmSettingsStackPush(PSCMSETTINGS *ppSettingsStack, PSCMSETTINGS pSettings)
{
    PSCMSETTINGS pOld = *ppSettingsStack;
    pSettings->pDown  = pOld;
    pSettings->pUp    = NULL;
    if (pOld)
        pOld->pUp = pSettings;
    *ppSettingsStack = pSettings;
}

/**
 * Pushes the settings of the specified directory onto the stack.
 *
 * We will load any .scm-settings in the directory.  A stack entry is added even
 * if no settings file was found.
 *
 * @returns IPRT status code.
 * @param   ppSettingsStack     The pointer to the pointer to the top stack
 *                              element.  This will be used as input and output.
 * @param   pszDir              The directory to do this for.
 */
static int scmSettingsStackPushDir(PSCMSETTINGS *ppSettingsStack, const char *pszDir)
{
    char szFile[RTPATH_MAX];
    int rc = RTPathJoin(szFile, sizeof(szFile), pszDir, SCM_SETTINGS_FILENAME);
    if (RT_SUCCESS(rc))
    {
        PSCMSETTINGS pSettings;
        rc = scmSettingsCreate(&pSettings, &(*ppSettingsStack)->Base);
        if (RT_SUCCESS(rc))
        {
            if (RTFileExists(szFile))
                rc = scmSettingsLoadFile(pSettings, szFile);
            if (RT_SUCCESS(rc))
            {
                scmSettingsStackPush(ppSettingsStack, pSettings);
                return VINF_SUCCESS;
            }

            scmSettingsDestroy(pSettings);
        }
    }
    return rc;
}


/**
 * Pops a settings set off the stack.
 *
 * @returns The popped setttings.
 * @param   ppSettingsStack     The pointer to the pointer to the top stack
 *                              element.  This will be used as input and output.
 */
static PSCMSETTINGS scmSettingsStackPop(PSCMSETTINGS *ppSettingsStack)
{
    PSCMSETTINGS pRet = *ppSettingsStack;
    PSCMSETTINGS pNew = pRet ? pRet->pDown : NULL;
    *ppSettingsStack = pNew;
    if (pNew)
        pNew->pUp    = NULL;
    if (pRet)
    {
        pRet->pUp    = NULL;
        pRet->pDown  = NULL;
    }
    return pRet;
}

/**
 * Pops and destroys the top entry of the stack.
 *
 * @param   ppSettingsStack     The pointer to the pointer to the top stack
 *                              element.  This will be used as input and output.
 */
static void scmSettingsStackPopAndDestroy(PSCMSETTINGS *ppSettingsStack)
{
    scmSettingsDestroy(scmSettingsStackPop(ppSettingsStack));
}

/**
 * Constructs the base settings for the specified file name.
 *
 * @returns IPRT status code.
 * @param   pSettingsStack      The top element on the settings stack.
 * @param   pszFilename         The file name.
 * @param   pszBasename         The base name (pointer within @a pszFilename).
 * @param   cchBasename         The length of the base name.  (For passing to
 *                              RTStrSimplePatternMultiMatch.)
 * @param   pBase               Base settings to initialize.
 */
static int scmSettingsStackMakeFileBase(PCSCMSETTINGS pSettingsStack, const char *pszFilename,
                                        const char *pszBasename, size_t cchBasename, PSCMSETTINGSBASE pBase)
{
    int rc = scmSettingsBaseInitAndCopy(pBase, &pSettingsStack->Base);
    if (RT_SUCCESS(rc))
    {
        /* find the bottom entry in the stack. */
        PCSCMSETTINGS pCur = pSettingsStack;
        while (pCur->pDown)
            pCur = pCur->pDown;

        /* Work our way up thru the stack and look for matching pairs. */
        while (pCur)
        {
            size_t const cPairs = pCur->cPairs;
            if (cPairs)
            {
                for (size_t i = 0; i < cPairs; i++)
                    if (   RTStrSimplePatternMultiMatch(pCur->paPairs[i].pszPattern, RTSTR_MAX,
                                                        pszBasename,  cchBasename, NULL)
                        || RTStrSimplePatternMultiMatch(pCur->paPairs[i].pszPattern, RTSTR_MAX,
                                                        pszFilename,  RTSTR_MAX, NULL))
                    {
                        rc = scmSettingsBaseParseString(pBase, pCur->paPairs[i].pszOptions);
                        if (RT_FAILURE(rc))
                            break;
                    }
                if (RT_FAILURE(rc))
                    break;
            }

            /* advance */
            pCur = pCur->pUp;
        }
    }
    if (RT_FAILURE(rc))
        scmSettingsBaseDelete(pBase);
    return rc;
}


/* -=-=-=-=-=- misc -=-=-=-=-=- */


/**
 * Prints a verbose message if the level is high enough.
 *
 * @param   pState              The rewrite state.  Optional.
 * @param   iLevel              The required verbosity level.
 * @param   pszFormat           The message format string.  Can be NULL if we
 *                              only want to trigger the per file message.
 * @param   ...                 Format arguments.
 */
static void ScmVerbose(PSCMRWSTATE pState, int iLevel, const char *pszFormat, ...)
{
    if (iLevel <= g_iVerbosity)
    {
        if (pState && !pState->fFirst)
        {
            RTPrintf("%s: info: --= Rewriting '%s' =--\n", g_szProgName, pState->pszFilename);
            pState->fFirst = true;
        }
        if (pszFormat)
        {
            RTPrintf(pState
                     ? "%s: info:   "
                     : "%s: info: ",
                     g_szProgName);
            va_list va;
            va_start(va, pszFormat);
            RTPrintfV(pszFormat, va);
            va_end(va);
        }
    }
}


/* -=-=-=-=-=- subversion -=-=-=-=-=- */

#define SCM_WITHOUT_LIBSVN

#ifdef SCM_WITHOUT_LIBSVN

/**
 * Callback that is call for each path to search.
 */
static DECLCALLBACK(int) scmSvnFindSvnBinaryCallback(char const *pchPath, size_t cchPath, void *pvUser1, void *pvUser2)
{
    char   *pszDst = (char *)pvUser1;
    size_t  cchDst = (size_t)pvUser2;
    if (cchDst > cchPath)
    {
        memcpy(pszDst, pchPath, cchPath);
        pszDst[cchPath] = '\0';
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
        int rc = RTPathAppend(pszDst, cchDst, "svn.exe");
#else
        int rc = RTPathAppend(pszDst, cchDst, "svn");
#endif
        if (   RT_SUCCESS(rc)
            && RTFileExists(pszDst))
            return VINF_SUCCESS;
    }
    return VERR_TRY_AGAIN;
}


/**
 * Finds the svn binary.
 *
 * @param   pszPath             Where to store it.  Worst case, we'll return
 *                              "svn" here.
 * @param   cchPath             The size of the buffer pointed to by @a pszPath.
 */
static void scmSvnFindSvnBinary(char *pszPath, size_t cchPath)
{
    /** @todo code page fun... */
    Assert(cchPath >= sizeof("svn"));
#ifdef RT_OS_WINDOWS
    const char *pszEnvVar = RTEnvGet("Path");
#else
    const char *pszEnvVar = RTEnvGet("PATH");
#endif
    if (pszPath)
    {
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
        int rc = RTPathTraverseList(pszEnvVar, ';', scmSvnFindSvnBinaryCallback, pszPath, (void *)cchPath);
#else
        int rc = RTPathTraverseList(pszEnvVar, ':', scmSvnFindSvnBinaryCallback, pszPath, (void *)cchPath);
#endif
        if (RT_SUCCESS(rc))
            return;
    }
    strcpy(pszPath, "svn");
}


/**
 * Construct a dot svn filename for the file being rewritten.
 *
 * @returns IPRT status code.
 * @param   pState              The rewrite state (for the name).
 * @param   pszDir              The directory, including ".svn/".
 * @param   pszSuff             The filename suffix.
 * @param   pszDst              The output buffer.  RTPATH_MAX in size.
 */
static int scmSvnConstructName(PSCMRWSTATE pState, const char *pszDir, const char *pszSuff, char *pszDst)
{
    strcpy(pszDst, pState->pszFilename); /* ASSUMES sizeof(szBuf) <= sizeof(szPath) */
    RTPathStripFilename(pszDst);

    int rc = RTPathAppend(pszDst, RTPATH_MAX, pszDir);
    if (RT_SUCCESS(rc))
    {
        rc = RTPathAppend(pszDst, RTPATH_MAX, RTPathFilename(pState->pszFilename));
        if (RT_SUCCESS(rc))
        {
            size_t cchDst  = strlen(pszDst);
            size_t cchSuff = strlen(pszSuff);
            if (cchDst + cchSuff < RTPATH_MAX)
            {
                memcpy(&pszDst[cchDst], pszSuff, cchSuff + 1);
                return VINF_SUCCESS;
            }
            else
                rc = VERR_BUFFER_OVERFLOW;
        }
    }
    return rc;
}

/**
 * Interprets the specified string as decimal numbers.
 *
 * @returns true if parsed successfully, false if not.
 * @param   pch                 The string (not terminated).
 * @param   cch                 The string length.
 * @param   pu                  Where to return the value.
 */
static bool scmSvnReadNumber(const char *pch, size_t cch, size_t *pu)
{
    size_t u = 0;
    while (cch-- > 0)
    {
        char ch = *pch++;
        if (ch < '0' || ch > '9')
            return false;
        u *= 10;
        u += ch - '0';
    }
    *pu = u;
    return true;
}

#endif /* SCM_WITHOUT_LIBSVN */

/**
 * Checks if the file we're operating on is part of a SVN working copy.
 *
 * @returns true if it is, false if it isn't or we cannot tell.
 * @param   pState              The rewrite state to work on.
 */
static bool scmSvnIsInWorkingCopy(PSCMRWSTATE pState)
{
#ifdef SCM_WITHOUT_LIBSVN
    /*
     * Hack: check if the .svn/text-base/<file>.svn-base file exists.
     */
    char szPath[RTPATH_MAX];
    int rc = scmSvnConstructName(pState, ".svn/text-base/", ".svn-base", szPath);
    if (RT_SUCCESS(rc))
        return RTFileExists(szPath);

#else
    NOREF(pState);
#endif
    return false;
}

/**
 * Queries the value of an SVN property.
 *
 * This will automatically adjust for scheduled changes.
 *
 * @returns IPRT status code.
 * @retval  VERR_INVALID_STATE if not a SVN WC file.
 * @retval  VERR_NOT_FOUND if the property wasn't found.
 * @param   pState              The rewrite state to work on.
 * @param   pszName             The property name.
 * @param   ppszValue           Where to return the property value.  Free this
 *                              using RTStrFree.  Optional.
 */
static int scmSvnQueryProperty(PSCMRWSTATE pState, const char *pszName, char **ppszValue)
{
    /*
     * Look it up in the scheduled changes.
     */
    uint32_t i = pState->cSvnPropChanges;
    while (i-- > 0)
        if (!strcmp(pState->paSvnPropChanges[i].pszName, pszName))
        {
            const char *pszValue = pState->paSvnPropChanges[i].pszValue;
            if (!pszValue)
                return VERR_NOT_FOUND;
            if (ppszValue)
                return RTStrDupEx(ppszValue, pszValue);
            return VINF_SUCCESS;
        }

#ifdef SCM_WITHOUT_LIBSVN
    /*
     * Hack: Read the .svn/props/<file>.svn-work file exists.
     */
    char szPath[RTPATH_MAX];
    int rc = scmSvnConstructName(pState, ".svn/props/", ".svn-work", szPath);
    if (RT_SUCCESS(rc) && !RTFileExists(szPath))
        rc = scmSvnConstructName(pState, ".svn/prop-base/", ".svn-base", szPath);
    if (RT_SUCCESS(rc))
    {
        SCMSTREAM Stream;
        rc = ScmStreamInitForReading(&Stream, szPath);
        if (RT_SUCCESS(rc))
        {
            /*
             * The current format is K len\n<name>\nV len\n<value>\n" ... END.
             */
            rc = VERR_NOT_FOUND;
            size_t const    cchName = strlen(pszName);
            SCMEOL          enmEol;
            size_t          cchLine;
            const char     *pchLine;
            while ((pchLine = ScmStreamGetLine(&Stream, &cchLine, &enmEol)) != NULL)
            {
                /*
                 * Parse the 'K num' / 'END' line.
                 */
                if (   cchLine == 3
                    && !memcmp(pchLine, "END", 3))
                    break;
                size_t cchKey;
                if (   cchLine < 3
                    || pchLine[0] != 'K'
                    || pchLine[1] != ' '
                    || !scmSvnReadNumber(&pchLine[2], cchLine - 2, &cchKey)
                    || cchKey == 0
                    || cchKey > 4096)
                {
                    RTMsgError("%s:%u: Unexpected data '%.*s'\n", szPath, ScmStreamTellLine(&Stream), cchLine, pchLine);
                    rc = VERR_PARSE_ERROR;
                    break;
                }

                /*
                 * Match the key and skip to the value line.  Don't bother with
                 * names containing EOL markers.
                 */
                size_t const offKey = ScmStreamTell(&Stream);
                bool fMatch = cchName == cchKey;
                if (fMatch)
                {
                    pchLine = ScmStreamGetLine(&Stream, &cchLine, &enmEol);
                    if (!pchLine)
                        break;
                    fMatch = cchLine == cchName
                          && !memcmp(pchLine, pszName, cchName);
                }

                if (RT_FAILURE(ScmStreamSeekAbsolute(&Stream, offKey + cchKey)))
                    break;
                if (RT_FAILURE(ScmStreamSeekByLine(&Stream, ScmStreamTellLine(&Stream) + 1)))
                    break;

                /*
                 * Read and Parse the 'V num' line.
                 */
                pchLine = ScmStreamGetLine(&Stream, &cchLine, &enmEol);
                if (!pchLine)
                    break;
                size_t cchValue;
                if (   cchLine < 3
                    || pchLine[0] != 'V'
                    || pchLine[1] != ' '
                    || !scmSvnReadNumber(&pchLine[2], cchLine - 2, &cchValue)
                    || cchValue > _1M)
                {
                    RTMsgError("%s:%u: Unexpected data '%.*s'\n", szPath, ScmStreamTellLine(&Stream), cchLine, pchLine);
                    rc = VERR_PARSE_ERROR;
                    break;
                }

                /*
                 * If we have a match, allocate a return buffer and read the
                 * value into it.  Otherwise skip this value and continue
                 * searching.
                 */
                if (fMatch)
                {
                    if (!ppszValue)
                        rc = VINF_SUCCESS;
                    else
                    {
                        char *pszValue;
                        rc = RTStrAllocEx(&pszValue, cchValue + 1);
                        if (RT_SUCCESS(rc))
                        {
                            rc = ScmStreamRead(&Stream, pszValue, cchValue);
                            if (RT_SUCCESS(rc))
                                *ppszValue = pszValue;
                            else
                                RTStrFree(pszValue);
                        }
                    }
                    break;
                }

                if (RT_FAILURE(ScmStreamSeekRelative(&Stream, cchValue)))
                    break;
                if (RT_FAILURE(ScmStreamSeekByLine(&Stream, ScmStreamTellLine(&Stream) + 1)))
                    break;
            }

            if (RT_FAILURE(ScmStreamGetStatus(&Stream)))
            {
                rc = ScmStreamGetStatus(&Stream);
                RTMsgError("%s: stream error %Rrc\n", szPath, rc);
            }
            ScmStreamDelete(&Stream);
        }
    }

    if (rc == VERR_FILE_NOT_FOUND)
        rc = VERR_NOT_FOUND;
    return rc;

#else
    NOREF(pState);
#endif
    return VERR_NOT_FOUND;
}


/**
 * Schedules the setting of a property.
 *
 * @returns IPRT status code.
 * @retval  VERR_INVALID_STATE if not a SVN WC file.
 * @param   pState              The rewrite state to work on.
 * @param   pszName             The name of the property to set.
 * @param   pszValue            The value.  NULL means deleting it.
 */
static int scmSvnSetProperty(PSCMRWSTATE pState, const char *pszName, const char *pszValue)
{
    /*
     * Update any existing entry first.
     */
    size_t i = pState->cSvnPropChanges;
    while (i-- > 0)
        if (!strcmp(pState->paSvnPropChanges[i].pszName,  pszName))
        {
            if (!pszValue)
            {
                RTStrFree(pState->paSvnPropChanges[i].pszValue);
                pState->paSvnPropChanges[i].pszValue = NULL;
            }
            else
            {
                char *pszCopy;
                int rc = RTStrDupEx(&pszCopy, pszValue);
                if (RT_FAILURE(rc))
                    return rc;
                pState->paSvnPropChanges[i].pszValue = pszCopy;
            }
            return VINF_SUCCESS;
        }

    /*
     * Insert a new entry.
     */
    i = pState->cSvnPropChanges;
    if ((i % 32) == 0)
    {
        void *pvNew = RTMemRealloc(pState->paSvnPropChanges, (i + 32) * sizeof(SCMSVNPROP));
        if (!pvNew)
            return VERR_NO_MEMORY;
        pState->paSvnPropChanges = (PSCMSVNPROP)pvNew;
    }

    pState->paSvnPropChanges[i].pszName  = RTStrDup(pszName);
    pState->paSvnPropChanges[i].pszValue = pszValue ? RTStrDup(pszValue) : NULL;
    if (   pState->paSvnPropChanges[i].pszName
        && (pState->paSvnPropChanges[i].pszValue || !pszValue) )
        pState->cSvnPropChanges = i + 1;
    else
    {
        RTStrFree(pState->paSvnPropChanges[i].pszName);
        pState->paSvnPropChanges[i].pszName = NULL;
        RTStrFree(pState->paSvnPropChanges[i].pszValue);
        pState->paSvnPropChanges[i].pszValue = NULL;
        return VERR_NO_MEMORY;
    }
    return VINF_SUCCESS;
}


/**
 * Schedules a property deletion.
 *
 * @returns IPRT status code.
 * @param   pState              The rewrite state to work on.
 * @param   pszName             The name of the property to delete.
 */
static int scmSvnDelProperty(PSCMRWSTATE pState, const char *pszName)
{
    return scmSvnSetProperty(pState, pszName, NULL);
}


/**
 * Applies any SVN property changes to the work copy of the file.
 *
 * @returns IPRT status code.
 * @param   pState              The rewrite state which SVN property changes
 *                              should be applied.
 */
static int scmSvnDisplayChanges(PSCMRWSTATE pState)
{
    size_t i = pState->cSvnPropChanges;
    while (i-- > 0)
    {
        const char *pszName  = pState->paSvnPropChanges[i].pszName;
        const char *pszValue = pState->paSvnPropChanges[i].pszValue;
        if (pszValue)
            ScmVerbose(pState, 0, "svn ps '%s' '%s'  %s\n", pszName, pszValue, pState->pszFilename);
        else
            ScmVerbose(pState, 0, "svn pd '%s'  %s\n", pszName, pszValue, pState->pszFilename);
    }

    return VINF_SUCCESS;
}

/**
 * Applies any SVN property changes to the work copy of the file.
 *
 * @returns IPRT status code.
 * @param   pState              The rewrite state which SVN property changes
 *                              should be applied.
 */
static int scmSvnApplyChanges(PSCMRWSTATE pState)
{
#ifdef SCM_WITHOUT_LIBSVN
    /*
     * This sucks. We gotta find svn(.exe).
     */
    static char s_szSvnPath[RTPATH_MAX];
    if (s_szSvnPath[0] == '\0')
        scmSvnFindSvnBinary(s_szSvnPath, sizeof(s_szSvnPath));

    /*
     * Iterate thru the changes and apply them by starting the svn client.
     */
    for (size_t i = 0; i <pState->cSvnPropChanges; i++)
    {
        const char *apszArgv[6];
        apszArgv[0] = s_szSvnPath;
        apszArgv[1] = pState->paSvnPropChanges[i].pszValue ? "ps" : "pd";
        apszArgv[2] = pState->paSvnPropChanges[i].pszName;
        int iArg = 3;
        if (pState->paSvnPropChanges[i].pszValue)
            apszArgv[iArg++] = pState->paSvnPropChanges[i].pszValue;
        apszArgv[iArg++] = pState->pszFilename;
        apszArgv[iArg++] = NULL;
        ScmVerbose(pState, 2, "executing: %s %s %s %s %s\n",
                   apszArgv[0], apszArgv[1], apszArgv[2], apszArgv[3], apszArgv[4]);

        RTPROCESS pid;
        int rc = RTProcCreate(s_szSvnPath, apszArgv, RTENV_DEFAULT, 0 /*fFlags*/, &pid);
        if (RT_SUCCESS(rc))
        {
            RTPROCSTATUS Status;
            rc = RTProcWait(pid, RTPROCWAIT_FLAGS_BLOCK, &Status);
            if (    RT_SUCCESS(rc)
                &&  (   Status.enmReason != RTPROCEXITREASON_NORMAL
                     || Status.iStatus != 0) )
            {
                RTMsgError("%s: %s %s %s %s %s -> %s %u\n",
                           pState->pszFilename, apszArgv[0], apszArgv[1], apszArgv[2], apszArgv[3], apszArgv[4],
                           Status.enmReason == RTPROCEXITREASON_NORMAL   ? "exit code"
                           : Status.enmReason == RTPROCEXITREASON_SIGNAL ? "signal"
                           : Status.enmReason == RTPROCEXITREASON_ABEND  ? "abnormal end"
                           : "abducted by alien",
                           Status.iStatus);
                return VERR_GENERAL_FAILURE;
            }
        }
        if (RT_FAILURE(rc))
        {
            RTMsgError("%s: error executing %s %s %s %s %s: %Rrc\n",
                       pState->pszFilename, apszArgv[0], apszArgv[1], apszArgv[2], apszArgv[3], apszArgv[4], rc);
            return rc;
        }
    }

    return VINF_SUCCESS;
#else
    return VERR_NOT_IMPLEMENTED;
#endif
}


/* -=-=-=-=-=- rewriters -=-=-=-=-=- */


/**
 * Strip trailing blanks (space & tab).
 *
 * @returns True if modified, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_StripTrailingBlanks(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    if (!pSettings->fStripTrailingBlanks)
        return false;

    bool        fModified = false;
    SCMEOL      enmEol;
    size_t      cchLine;
    const char *pchLine;
    while ((pchLine = ScmStreamGetLine(pIn, &cchLine, &enmEol)) != NULL)
    {
        int rc;
        if (    cchLine == 0
            ||  !RT_C_IS_BLANK(pchLine[cchLine - 1]) )
            rc = ScmStreamPutLine(pOut, pchLine, cchLine, enmEol);
        else
        {
            cchLine--;
            while (cchLine > 0 && RT_C_IS_BLANK(pchLine[cchLine - 1]))
                cchLine--;
            rc = ScmStreamPutLine(pOut, pchLine, cchLine, enmEol);
            fModified = true;
        }
        if (RT_FAILURE(rc))
            return false;
    }
    if (fModified)
        ScmVerbose(pState, 2, " * Stripped trailing blanks\n");
    return fModified;
}

/**
 * Expand tabs.
 *
 * @returns True if modified, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_ExpandTabs(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    if (!pSettings->fConvertTabs)
        return false;

    size_t const    cchTab = pSettings->cchTab;
    bool            fModified = false;
    SCMEOL          enmEol;
    size_t          cchLine;
    const char     *pchLine;
    while ((pchLine = ScmStreamGetLine(pIn, &cchLine, &enmEol)) != NULL)
    {
        int rc;
        const char *pchTab = (const char *)memchr(pchLine, '\t', cchLine);
        if (!pchTab)
            rc = ScmStreamPutLine(pOut, pchLine, cchLine, enmEol);
        else
        {
            size_t      offTab   = 0;
            const char *pchChunk = pchLine;
            for (;;)
            {
                size_t  cchChunk = pchTab - pchChunk;
                offTab += cchChunk;
                ScmStreamWrite(pOut, pchChunk, cchChunk);

                size_t  cchToTab = cchTab - offTab % cchTab;
                ScmStreamWrite(pOut, g_szTabSpaces, cchToTab);
                offTab += cchToTab;

                pchChunk = pchTab + 1;
                size_t  cchLeft  = cchLine - (pchChunk - pchLine);
                pchTab = (const char *)memchr(pchChunk, '\t', cchLeft);
                if (!pchTab)
                {
                    rc = ScmStreamPutLine(pOut, pchChunk, cchLeft, enmEol);
                    break;
                }
            }

            fModified = true;
        }
        if (RT_FAILURE(rc))
            return false;
    }
    if (fModified)
        ScmVerbose(pState, 2, " * Expanded tabs\n");
    return fModified;
}

/**
 * Worker for rewrite_ForceNativeEol, rewrite_ForceLF and rewrite_ForceCRLF.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 * @param   enmDesiredEol       The desired end of line indicator type.
 * @param   pszDesiredSvnEol    The desired svn:eol-style.
 */
static bool rewrite_ForceEol(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings,
                             SCMEOL enmDesiredEol, const char *pszDesiredSvnEol)
{
    if (!pSettings->fConvertEol)
        return false;

    bool        fModified = false;
    SCMEOL      enmEol;
    size_t      cchLine;
    const char *pchLine;
    while ((pchLine = ScmStreamGetLine(pIn, &cchLine, &enmEol)) != NULL)
    {
        if (   enmEol != enmDesiredEol
            && enmEol != SCMEOL_NONE)
        {
            fModified = true;
            enmEol = enmDesiredEol;
        }
        int rc = ScmStreamPutLine(pOut, pchLine, cchLine, enmEol);
        if (RT_FAILURE(rc))
            return false;
    }
    if (fModified)
        ScmVerbose(pState, 2, " * Converted EOL markers\n");

    /* Check svn:eol-style if appropriate */
    if (   pSettings->fSetSvnEol
        && scmSvnIsInWorkingCopy(pState))
    {
        char *pszEol;
        int rc = scmSvnQueryProperty(pState, "svn:eol-style", &pszEol);
        if (   (RT_SUCCESS(rc) && strcmp(pszEol, pszDesiredSvnEol))
            || rc == VERR_NOT_FOUND)
        {
            if (rc == VERR_NOT_FOUND)
                ScmVerbose(pState, 2, " * Setting svn:eol-style to %s (missing)\n", pszDesiredSvnEol);
            else
                ScmVerbose(pState, 2, " * Setting svn:eol-style to %s (was: %s)\n", pszDesiredSvnEol, pszEol);
            int rc2 = scmSvnSetProperty(pState, "svn:eol-style", pszDesiredSvnEol);
            if (RT_FAILURE(rc2))
                RTMsgError("scmSvnSetProperty: %Rrc\n", rc2); /** @todo propagate the error somehow... */
        }
        if (RT_SUCCESS(rc))
            RTStrFree(pszEol);
    }

    /** @todo also check the subversion svn:eol-style state! */
    return fModified;
}

/**
 * Force native end of line indicator.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_ForceNativeEol(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
#if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2)
    return rewrite_ForceEol(pState, pIn, pOut, pSettings, SCMEOL_CRLF, "native");
#else
    return rewrite_ForceEol(pState, pIn, pOut, pSettings, SCMEOL_LF,   "native");
#endif
}

/**
 * Force the stream to use LF as the end of line indicator.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_ForceLF(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    return rewrite_ForceEol(pState, pIn, pOut, pSettings, SCMEOL_LF, "LF");
}

/**
 * Force the stream to use CRLF as the end of line indicator.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_ForceCRLF(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    return rewrite_ForceEol(pState, pIn, pOut, pSettings, SCMEOL_CRLF, "CRLF");
}

/**
 * Strip trailing blank lines and/or make sure there is exactly one blank line
 * at the end of the file.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 *
 * @remarks ASSUMES trailing white space has been removed already.
 */
static bool rewrite_AdjustTrailingLines(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    if (   !pSettings->fStripTrailingLines
        && !pSettings->fForceTrailingLine
        && !pSettings->fForceFinalEol)
        return false;

    size_t const cLines = ScmStreamCountLines(pIn);

    /* Empty files remains empty. */
    if (cLines <= 1)
        return false;

    /* Figure out if we need to adjust the number of lines or not. */
    size_t cLinesNew = cLines;

    if (   pSettings->fStripTrailingLines
        && ScmStreamIsWhiteLine(pIn, cLinesNew - 1))
    {
        while (   cLinesNew > 1
               && ScmStreamIsWhiteLine(pIn, cLinesNew - 2))
            cLinesNew--;
    }

    if (    pSettings->fForceTrailingLine
        && !ScmStreamIsWhiteLine(pIn, cLinesNew - 1))
        cLinesNew++;

    bool fFixMissingEol = pSettings->fForceFinalEol
                       && ScmStreamGetEolByLine(pIn, cLinesNew - 1) == SCMEOL_NONE;

    if (   !fFixMissingEol
        && cLines == cLinesNew)
        return false;

    /* Copy the number of lines we've arrived at. */
    ScmStreamRewindForReading(pIn);

    size_t cCopied = RT_MIN(cLinesNew, cLines);
    ScmStreamCopyLines(pOut, pIn, cCopied);

    if (cCopied != cLinesNew)
    {
        while (cCopied++ < cLinesNew)
            ScmStreamPutLine(pOut, "", 0, ScmStreamGetEol(pIn));
    }
    /* Fix missing EOL if required. */
    else if (fFixMissingEol)
    {
        if (ScmStreamGetEol(pIn) == SCMEOL_LF)
            ScmStreamWrite(pOut, "\n", 1);
        else
            ScmStreamWrite(pOut, "\r\n", 2);
    }

    ScmVerbose(pState, 2, " * Adjusted trailing blank lines\n");
    return true;
}

/**
 * Make sure there is no svn:executable keyword on the current file.
 *
 * @returns false - the state carries these kinds of changes.
 * @param   pState              The rewriter state.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_SvnNoExecutable(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    if (   !pSettings->fSetSvnExecutable
        || !scmSvnIsInWorkingCopy(pState))
        return false;

    int rc = scmSvnQueryProperty(pState, "svn:executable", NULL);
    if (RT_SUCCESS(rc))
    {
        ScmVerbose(pState, 2, " * removing svn:executable\n");
        rc = scmSvnDelProperty(pState, "svn:executable");
        if (RT_FAILURE(rc))
            RTMsgError("scmSvnSetProperty: %Rrc\n", rc); /** @todo error propagation here.. */
    }
    return false;
}

/**
 * Make sure the Id and Revision keywords are expanded.
 *
 * @returns false - the state carries these kinds of changes.
 * @param   pState              The rewriter state.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_SvnKeywords(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    if (   !pSettings->fSetSvnKeywords
        || !scmSvnIsInWorkingCopy(pState))
        return false;

    char *pszKeywords;
    int rc = scmSvnQueryProperty(pState, "svn:keywords", &pszKeywords);
    if (    RT_SUCCESS(rc)
        && (   !strstr(pszKeywords, "Id") /** @todo need some function for finding a word in a string.  */
            || !strstr(pszKeywords, "Revision")) )
    {
        if (!strstr(pszKeywords, "Id") && !strstr(pszKeywords, "Revision"))
            rc = RTStrAAppend(&pszKeywords, " Id Revision");
        else if (!strstr(pszKeywords, "Id"))
            rc = RTStrAAppend(&pszKeywords, " Id");
        else
            rc = RTStrAAppend(&pszKeywords, " Revision");
        if (RT_SUCCESS(rc))
        {
            ScmVerbose(pState, 2, " * changing svn:keywords to '%s'\n", pszKeywords);
            rc = scmSvnSetProperty(pState, "svn:keywords", pszKeywords);
            if (RT_FAILURE(rc))
                RTMsgError("scmSvnSetProperty: %Rrc\n", rc); /** @todo error propagation here.. */
        }
        else
            RTMsgError("RTStrAppend: %Rrc\n", rc); /** @todo error propagation here.. */
        RTStrFree(pszKeywords);
    }
    else if (rc == VERR_NOT_FOUND)
    {
        ScmVerbose(pState, 2, " * setting svn:keywords to 'Id Revision'\n");
        rc = scmSvnSetProperty(pState, "svn:keywords", "Id Revision");
        if (RT_FAILURE(rc))
            RTMsgError("scmSvnSetProperty: %Rrc\n", rc); /** @todo error propagation here.. */
    }
    else if (RT_SUCCESS(rc))
        RTStrFree(pszKeywords);

    return false;
}

/**
 * Makefile.kup are empty files, enforce this.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 */
static bool rewrite_Makefile_kup(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    /* These files should be zero bytes. */
    if (pIn->cb == 0)
        return false;
    ScmVerbose(pState, 2, " * Truncated file to zero bytes\n");
    return true;
}

/**
 * Rewrite a kBuild makefile.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 *
 * @todo
 *
 * Ideas for Makefile.kmk and Config.kmk:
 *      - sort if1of/ifn1of sets.
 *      - line continuation slashes should only be preceded by one space.
 */
static bool rewrite_Makefile_kmk(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{
    return false;
}

/**
 * Rewrite a C/C++ source or header file.
 *
 * @returns true if modifications were made, false if not.
 * @param   pIn                 The input stream.
 * @param   pOut                The output stream.
 * @param   pSettings           The settings.
 *
 * @todo
 *
 * Ideas for C/C++:
 *      - space after if, while, for, switch
 *      - spaces in for (i=0;i<x;i++)
 *      - complex conditional, bird style.
 *      - remove unnecessary parentheses.
 *      - sort defined RT_OS_*||  and RT_ARCH
 *      - sizeof without parenthesis.
 *      - defined without parenthesis.
 *      - trailing spaces.
 *      - parameter indentation.
 *      - space after comma.
 *      - while (x--); -> multi line + comment.
 *      - else statement;
 *      - space between function and left parenthesis.
 *      - TODO, XXX, @todo cleanup.
 *      - Space before/after '*'.
 *      - ensure new line at end of file.
 *      - Indentation of precompiler statements (#ifdef, #defines).
 *      - space between functions.
 *      - string.h -> iprt/string.h, stdarg.h -> iprt/stdarg.h, etc.
 */
static bool rewrite_C_and_CPP(PSCMRWSTATE pState, PSCMSTREAM pIn, PSCMSTREAM pOut, PCSCMSETTINGSBASE pSettings)
{

    return false;
}

/* -=-=-=-=-=- file and directory processing -=-=-=-=-=- */

/**
 * Processes a file.
 *
 * @returns IPRT status code.
 * @param   pState              The rewriter state.
 * @param   pszFilename         The file name.
 * @param   pszBasename         The base name (pointer within @a pszFilename).
 * @param   cchBasename         The length of the base name.  (For passing to
 *                              RTStrSimplePatternMultiMatch.)
 * @param   pBaseSettings       The base settings to use.  It's OK to modify
 *                              these.
 */
static int scmProcessFileInner(PSCMRWSTATE pState, const char *pszFilename, const char *pszBasename, size_t cchBasename,
                               PSCMSETTINGSBASE pBaseSettings)
{
    /*
     * Do the file level filtering.
     */
    if (   pBaseSettings->pszFilterFiles
        && *pBaseSettings->pszFilterFiles
        && !RTStrSimplePatternMultiMatch(pBaseSettings->pszFilterFiles, RTSTR_MAX, pszBasename, cchBasename, NULL))
    {
        ScmVerbose(NULL, 5, "skipping '%s': file filter mismatch\n", pszFilename);
        return VINF_SUCCESS;
    }
    if (   pBaseSettings->pszFilterOutFiles
        && *pBaseSettings->pszFilterOutFiles
        && (   RTStrSimplePatternMultiMatch(pBaseSettings->pszFilterOutFiles, RTSTR_MAX, pszBasename, cchBasename, NULL)
            || RTStrSimplePatternMultiMatch(pBaseSettings->pszFilterOutFiles, RTSTR_MAX, pszFilename, RTSTR_MAX, NULL)) )
    {
        ScmVerbose(NULL, 5, "skipping '%s': filterd out\n", pszFilename);
        return VINF_SUCCESS;
    }
    if (   pBaseSettings->fOnlySvnFiles
        && !scmSvnIsInWorkingCopy(pState))
    {
        ScmVerbose(NULL, 5, "skipping '%s': not in SVN WC\n", pszFilename);
        return VINF_SUCCESS;
    }

    /*
     * Try find a matching rewrite config for this filename.
     */
    PCSCMCFGENTRY pCfg = NULL;
    for (size_t iCfg = 0; iCfg < RT_ELEMENTS(g_aConfigs); iCfg++)
        if (RTStrSimplePatternMultiMatch(g_aConfigs[iCfg].pszFilePattern, RTSTR_MAX, pszBasename, cchBasename, NULL))
        {
            pCfg = &g_aConfigs[iCfg];
            break;
        }
    if (!pCfg)
    {
        ScmVerbose(NULL, 4, "skipping '%s': no rewriters configured\n", pszFilename);
        return VINF_SUCCESS;
    }
    ScmVerbose(pState, 4, "matched \"%s\"\n", pCfg->pszFilePattern);

    /*
     * Create an input stream from the file and check that it's text.
     */
    SCMSTREAM Stream1;
    int rc = ScmStreamInitForReading(&Stream1, pszFilename);
    if (RT_FAILURE(rc))
    {
        RTMsgError("Failed to read '%s': %Rrc\n", pszFilename, rc);
        return rc;
    }
    if (ScmStreamIsText(&Stream1))
    {
        ScmVerbose(pState, 3, NULL);

        /*
         * Gather SCM and editor settings from the stream.
         */
        rc = scmSettingsBaseLoadFromDocument(pBaseSettings, &Stream1);
        if (RT_SUCCESS(rc))
        {
            ScmStreamRewindForReading(&Stream1);

            /*
             * Create two more streams for output and push the text thru all the
             * rewriters, switching the two streams around when something is
             * actually rewritten.  Stream1 remains unchanged.
             */
            SCMSTREAM Stream2;
            rc = ScmStreamInitForWriting(&Stream2, &Stream1);
            if (RT_SUCCESS(rc))
            {
                SCMSTREAM Stream3;
                rc = ScmStreamInitForWriting(&Stream3, &Stream1);
                if (RT_SUCCESS(rc))
                {
                    bool        fModified = false;
                    PSCMSTREAM  pIn       = &Stream1;
                    PSCMSTREAM  pOut      = &Stream2;
                    for (size_t iRw = 0; iRw < pCfg->cRewriters; iRw++)
                    {
                        bool fRc = pCfg->papfnRewriter[iRw](pState, pIn, pOut, pBaseSettings);
                        if (fRc)
                        {
                            PSCMSTREAM pTmp = pOut;
                            pOut = pIn == &Stream1 ? &Stream3 : pIn;
                            pIn  = pTmp;
                            fModified = true;
                        }
                        ScmStreamRewindForReading(pIn);
                        ScmStreamRewindForWriting(pOut);
                    }

                    rc = ScmStreamGetStatus(&Stream1);
                    if (RT_SUCCESS(rc))
                        rc = ScmStreamGetStatus(&Stream2);
                    if (RT_SUCCESS(rc))
                        rc = ScmStreamGetStatus(&Stream3);
                    if (RT_SUCCESS(rc))
                    {
                        /*
                         * If rewritten, write it back to disk.
                         */
                        if (fModified)
                        {
                            if (!g_fDryRun)
                            {
                                ScmVerbose(pState, 1, "writing modified file to \"%s%s\"\n", pszFilename, g_pszChangedSuff);
                                rc = ScmStreamWriteToFile(pIn, "%s%s", pszFilename, g_pszChangedSuff);
                                if (RT_FAILURE(rc))
                                    RTMsgError("Error writing '%s%s': %Rrc\n", pszFilename, g_pszChangedSuff, rc);
                            }
                            else
                            {
                                ScmVerbose(pState, 1, NULL);
                                ScmDiffStreams(pszFilename, &Stream1, pIn, g_fDiffIgnoreEol, g_fDiffIgnoreLeadingWS,
                                               g_fDiffIgnoreTrailingWS, g_fDiffSpecialChars, pBaseSettings->cchTab, g_pStdOut);
                                ScmVerbose(pState, 2, "would have modified the file \"%s%s\"\n", pszFilename, g_pszChangedSuff);
                            }
                        }

                        /*
                         * If pending SVN property changes, apply them.
                         */
                        if (pState->cSvnPropChanges && RT_SUCCESS(rc))
                        {
                            if (!g_fDryRun)
                            {
                                rc = scmSvnApplyChanges(pState);
                                if (RT_FAILURE(rc))
                                    RTMsgError("%s: failed to apply SVN property changes (%Rrc)\n", pszFilename, rc);
                            }
                            else
                                scmSvnDisplayChanges(pState);
                        }

                        if (!fModified && !pState->cSvnPropChanges)
                            ScmVerbose(pState, 3, "no change\n", pszFilename);
                    }
                    else
                        RTMsgError("%s: stream error %Rrc\n", pszFilename);
                    ScmStreamDelete(&Stream3);
                }
                else
                    RTMsgError("Failed to init stream for writing: %Rrc\n", rc);
                ScmStreamDelete(&Stream2);
            }
            else
                RTMsgError("Failed to init stream for writing: %Rrc\n", rc);
        }
        else
            RTMsgError("scmSettingsBaseLoadFromDocument: %Rrc\n", rc);
    }
    else
        ScmVerbose(pState, 4, "not text file: \"%s\"\n", pszFilename);
    ScmStreamDelete(&Stream1);

    return rc;
}

/**
 * Processes a file.
 *
 * This is just a wrapper for scmProcessFileInner for avoid wasting stack in the
 * directory recursion method.
 *
 * @returns IPRT status code.
 * @param   pszFilename         The file name.
 * @param   pszBasename         The base name (pointer within @a pszFilename).
 * @param   cchBasename         The length of the base name.  (For passing to
 *                              RTStrSimplePatternMultiMatch.)
 * @param   pSettingsStack      The settings stack (pointer to the top element).
 */
static int scmProcessFile(const char *pszFilename, const char *pszBasename, size_t cchBasename,
                          PSCMSETTINGS pSettingsStack)
{
    SCMSETTINGSBASE Base;
    int rc = scmSettingsStackMakeFileBase(pSettingsStack, pszFilename, pszBasename, cchBasename, &Base);
    if (RT_SUCCESS(rc))
    {
        SCMRWSTATE State;
        State.fFirst           = false;
        State.pszFilename      = pszFilename;
        State.cSvnPropChanges  = 0;
        State.paSvnPropChanges = NULL;

        rc = scmProcessFileInner(&State, pszFilename, pszBasename, cchBasename, &Base);

        size_t i = State.cSvnPropChanges;
        while (i-- > 0)
        {
            RTStrFree(State.paSvnPropChanges[i].pszName);
            RTStrFree(State.paSvnPropChanges[i].pszValue);
        }
        RTMemFree(State.paSvnPropChanges);

        scmSettingsBaseDelete(&Base);
    }
    return rc;
}


/**
 * Tries to correct RTDIRENTRY_UNKNOWN.
 *
 * @returns Corrected type.
 * @param   pszPath             The path to the object in question.
 */
static RTDIRENTRYTYPE scmFigureUnknownType(const char *pszPath)
{
    RTFSOBJINFO Info;
    int rc = RTPathQueryInfo(pszPath, &Info, RTFSOBJATTRADD_NOTHING);
    if (RT_FAILURE(rc))
        return RTDIRENTRYTYPE_UNKNOWN;
    if (RTFS_IS_DIRECTORY(Info.Attr.fMode))
        return RTDIRENTRYTYPE_DIRECTORY;
    if (RTFS_IS_FILE(Info.Attr.fMode))
        return RTDIRENTRYTYPE_FILE;
    return RTDIRENTRYTYPE_UNKNOWN;
}

/**
 * Recurse into a sub-directory and process all the files and directories.
 *
 * @returns IPRT status code.
 * @param   pszBuf              Path buffer containing the directory path on
 *                              entry.  This ends with a dot.  This is passed
 *                              along when recursing in order to save stack space
 *                              and avoid needless copying.
 * @param   cchDir              Length of our path in pszbuf.
 * @param   pEntry              Directory entry buffer.  This is also passed
 *                              along when recursing to save stack space.
 * @param   pSettingsStack      The settings stack (pointer to the top element).
 * @param   iRecursion          The recursion depth.  This is used to restrict
 *                              the recursions.
 */
static int scmProcessDirTreeRecursion(char *pszBuf, size_t cchDir, PRTDIRENTRY pEntry,
                                      PSCMSETTINGS pSettingsStack, unsigned iRecursion)
{
    int rc;
    Assert(cchDir > 1 && pszBuf[cchDir - 1] == '.');

    /*
     * Make sure we stop somewhere.
     */
    if (iRecursion > 128)
    {
        RTMsgError("recursion too deep: %d\n", iRecursion);
        return VINF_SUCCESS; /* ignore */
    }

    /*
     * Check if it's excluded by --only-svn-dir.
     */
    if (pSettingsStack->Base.fOnlySvnDirs)
    {
        rc = RTPathAppend(pszBuf, RTPATH_MAX, ".svn");
        if (RT_FAILURE(rc))
        {
            RTMsgError("RTPathAppend: %Rrc\n", rc);
            return rc;
        }
        if (!RTDirExists(pszBuf))
            return VINF_SUCCESS;

        Assert(RTPATH_IS_SLASH(pszBuf[cchDir]));
        pszBuf[cchDir]     = '\0';
        pszBuf[cchDir - 1] = '.';
    }

    /*
     * Try open and read the directory.
     */
    PRTDIR pDir;
    rc = RTDirOpenFiltered(&pDir, pszBuf, RTDIRFILTER_NONE);
    if (RT_FAILURE(rc))
    {
        RTMsgError("Failed to enumerate directory '%s': %Rrc", pszBuf, rc);
        return rc;
    }
    for (;;)
    {
        /* Read the next entry. */
        rc = RTDirRead(pDir, pEntry, NULL);
        if (RT_FAILURE(rc))
        {
            if (rc == VERR_NO_MORE_FILES)
                rc = VINF_SUCCESS;
            else
                RTMsgError("RTDirRead -> %Rrc\n", rc);
            break;
        }

        /* Skip '.' and '..'. */
        if (    pEntry->szName[0] == '.'
            &&  (   pEntry->cbName == 1
                 || (   pEntry->cbName == 2
                     && pEntry->szName[1] == '.')))
            continue;

        /* Enter it into the buffer so we've got a full name to work
           with when needed. */
        if (pEntry->cbName + cchDir >= RTPATH_MAX)
        {
            RTMsgError("Skipping too long entry: %s", pEntry->szName);
            continue;
        }
        memcpy(&pszBuf[cchDir - 1], pEntry->szName, pEntry->cbName + 1);

        /* Figure the type. */
        RTDIRENTRYTYPE enmType = pEntry->enmType;
        if (enmType == RTDIRENTRYTYPE_UNKNOWN)
            enmType = scmFigureUnknownType(pszBuf);

        /* Process the file or directory, skip the rest. */
        if (enmType == RTDIRENTRYTYPE_FILE)
            rc = scmProcessFile(pszBuf, pEntry->szName, pEntry->cbName, pSettingsStack);
        else if (enmType == RTDIRENTRYTYPE_DIRECTORY)
        {
            /* Append the dot for the benefit of the pattern matching. */
            if (pEntry->cbName + cchDir + 5 >= RTPATH_MAX)
            {
                RTMsgError("Skipping too deep dir entry: %s", pEntry->szName);
                continue;
            }
            memcpy(&pszBuf[cchDir - 1 + pEntry->cbName], "/.", sizeof("/."));
            size_t cchSubDir = cchDir - 1 + pEntry->cbName + sizeof("/.") - 1;

            if (   !pSettingsStack->Base.pszFilterOutDirs
                || !*pSettingsStack->Base.pszFilterOutDirs
                || (   !RTStrSimplePatternMultiMatch(pSettingsStack->Base.pszFilterOutDirs, RTSTR_MAX,
                                                     pEntry->szName, pEntry->cbName, NULL)
                    && !RTStrSimplePatternMultiMatch(pSettingsStack->Base.pszFilterOutDirs, RTSTR_MAX,
                                                     pszBuf, cchSubDir, NULL)
                   )
               )
            {
                rc = scmSettingsStackPushDir(&pSettingsStack, pszBuf);
                if (RT_SUCCESS(rc))
                {
                    rc = scmProcessDirTreeRecursion(pszBuf, cchSubDir, pEntry, pSettingsStack, iRecursion + 1);
                    scmSettingsStackPopAndDestroy(&pSettingsStack);
                }
            }
        }
        if (RT_FAILURE(rc))
            break;
    }
    RTDirClose(pDir);
    return rc;

}

/**
 * Process a directory tree.
 *
 * @returns IPRT status code.
 * @param   pszDir              The directory to start with.  This is pointer to
 *                              a RTPATH_MAX sized buffer.
 */
static int scmProcessDirTree(char *pszDir, PSCMSETTINGS pSettingsStack)
{
    /*
     * Setup the recursion.
     */
    int rc = RTPathAppend(pszDir, RTPATH_MAX, ".");
    if (RT_SUCCESS(rc))
    {
        RTDIRENTRY Entry;
        rc = scmProcessDirTreeRecursion(pszDir, strlen(pszDir), &Entry, pSettingsStack, 0);
    }
    else
        RTMsgError("RTPathAppend: %Rrc\n", rc);
    return rc;
}


/**
 * Processes a file or directory specified as an command line argument.
 *
 * @returns IPRT status code
 * @param   pszSomething        What we found in the command line arguments.
 * @param   pSettingsStack      The settings stack (pointer to the top element).
 */
static int scmProcessSomething(const char *pszSomething, PSCMSETTINGS pSettingsStack)
{
    char szBuf[RTPATH_MAX];
    int rc = RTPathAbs(pszSomething, szBuf, sizeof(szBuf));
    if (RT_SUCCESS(rc))
    {
        RTPathChangeToUnixSlashes(szBuf, false /*fForce*/);

        PSCMSETTINGS pSettings;
        rc = scmSettingsCreateForPath(&pSettings, &pSettingsStack->Base, szBuf);
        if (RT_SUCCESS(rc))
        {
            scmSettingsStackPush(&pSettingsStack, pSettings);

            if (RTFileExists(szBuf))
            {
                const char *pszBasename = RTPathFilename(szBuf);
                if (pszBasename)
                {
                    size_t cchBasename = strlen(pszBasename);
                    rc = scmProcessFile(szBuf, pszBasename, cchBasename, pSettingsStack);
                }
                else
                {
                    RTMsgError("RTPathFilename: NULL\n");
                    rc = VERR_IS_A_DIRECTORY;
                }
            }
            else
                rc = scmProcessDirTree(szBuf, pSettingsStack);

            PSCMSETTINGS pPopped = scmSettingsStackPop(&pSettingsStack);
            Assert(pPopped == pSettings);
            scmSettingsDestroy(pSettings);
        }
        else
            RTMsgError("scmSettingsInitStack: %Rrc\n", rc);
    }
    else
        RTMsgError("RTPathAbs: %Rrc\n", rc);
    return rc;
}

int main(int argc, char **argv)
{
    int rc = RTR3Init();
    if (RT_FAILURE(rc))
        return 1;

    /*
     * Init the settings.
     */
    PSCMSETTINGS pSettings;
    rc = scmSettingsCreate(&pSettings, &g_Defaults);
    if (RT_FAILURE(rc))
    {
        RTMsgError("scmSettingsCreate: %Rrc\n", rc);
        return 1;
    }

    /*
     * Parse arguments and process input in order (because this is the only
     * thing that works at the moment).
     */
    static RTGETOPTDEF s_aOpts[14 + RT_ELEMENTS(g_aScmOpts)] =
    {
        { "--dry-run",                          'd',                                    RTGETOPT_REQ_NOTHING },
        { "--real-run",                         'D',                                    RTGETOPT_REQ_NOTHING },
        { "--file-filter",                      'f',                                    RTGETOPT_REQ_STRING  },
        { "--quiet",                            'q',                                    RTGETOPT_REQ_NOTHING },
        { "--verbose",                          'v',                                    RTGETOPT_REQ_NOTHING },
        { "--diff-ignore-eol",                  SCMOPT_DIFF_IGNORE_EOL,                 RTGETOPT_REQ_NOTHING },
        { "--diff-no-ignore-eol",               SCMOPT_DIFF_NO_IGNORE_EOL,              RTGETOPT_REQ_NOTHING },
        { "--diff-ignore-space",                SCMOPT_DIFF_IGNORE_SPACE,               RTGETOPT_REQ_NOTHING },
        { "--diff-no-ignore-space",             SCMOPT_DIFF_NO_IGNORE_SPACE,            RTGETOPT_REQ_NOTHING },
        { "--diff-ignore-leading-space",        SCMOPT_DIFF_IGNORE_LEADING_SPACE,       RTGETOPT_REQ_NOTHING },
        { "--diff-no-ignore-leading-space",     SCMOPT_DIFF_NO_IGNORE_LEADING_SPACE,    RTGETOPT_REQ_NOTHING },
        { "--diff-ignore-trailing-space",       SCMOPT_DIFF_IGNORE_TRAILING_SPACE,      RTGETOPT_REQ_NOTHING },
        { "--diff-no-ignore-trailing-space",    SCMOPT_DIFF_NO_IGNORE_TRAILING_SPACE,   RTGETOPT_REQ_NOTHING },
        { "--diff-special-chars",               SCMOPT_DIFF_SPECIAL_CHARS,              RTGETOPT_REQ_NOTHING },
        { "--diff-no-special-chars",            SCMOPT_DIFF_NO_SPECIAL_CHARS,           RTGETOPT_REQ_NOTHING },
    };
    memcpy(&s_aOpts[RT_ELEMENTS(s_aOpts) - RT_ELEMENTS(g_aScmOpts)], &g_aScmOpts[0], sizeof(g_aScmOpts));

    RTGETOPTUNION   ValueUnion;
    RTGETOPTSTATE   GetOptState;
    rc = RTGetOptInit(&GetOptState, argc, argv, &s_aOpts[0], RT_ELEMENTS(s_aOpts), 1, RTGETOPTINIT_FLAGS_OPTS_FIRST);
    AssertReleaseRCReturn(rc, 1);
    size_t          cProcessed = 0;

    while ((rc = RTGetOpt(&GetOptState, &ValueUnion)) != 0)
    {
        switch (rc)
        {
            case 'd':
                g_fDryRun = true;
                break;
            case 'D':
                g_fDryRun = false;
                break;

            case 'f':
                g_pszFileFilter = ValueUnion.psz;
                break;

            case 'h':
                RTPrintf("VirtualBox Source Code Massager\n"
                         "\n"
                         "Usage: %s [options] <files & dirs>\n"
                         "\n"
                         "Options:\n", g_szProgName);
                for (size_t i = 0; i < RT_ELEMENTS(s_aOpts); i++)
                {
                    bool fAdvanceTwo = false;
                    if ((s_aOpts[i].fFlags & RTGETOPT_REQ_MASK) == RTGETOPT_REQ_NOTHING)
                    {
                        fAdvanceTwo = i + 1 < RT_ELEMENTS(s_aOpts)
                                   && (   strstr(s_aOpts[i+1].pszLong, "-no-") != NULL
                                       || strstr(s_aOpts[i+1].pszLong, "-not-") != NULL
                                       || strstr(s_aOpts[i+1].pszLong, "-dont-") != NULL
                                      );
                        if (fAdvanceTwo)
                            RTPrintf("  %s, %s\n", s_aOpts[i].pszLong, s_aOpts[i + 1].pszLong);
                        else
                            RTPrintf("  %s\n", s_aOpts[i].pszLong);
                    }
                    else if ((s_aOpts[i].fFlags & RTGETOPT_REQ_MASK) == RTGETOPT_REQ_STRING)
                        RTPrintf("  %s string\n", s_aOpts[i].pszLong);
                    else
                        RTPrintf("  %s value\n", s_aOpts[i].pszLong);
                    switch (s_aOpts[i].iShort)
                    {
                        case SCMOPT_CONVERT_EOL:            RTPrintf("      Default: %RTbool\n", g_Defaults.fConvertEol); break;
                        case SCMOPT_CONVERT_TABS:           RTPrintf("      Default: %RTbool\n", g_Defaults.fConvertTabs); break;
                        case SCMOPT_FORCE_FINAL_EOL:        RTPrintf("      Default: %RTbool\n", g_Defaults.fForceFinalEol); break;
                        case SCMOPT_FORCE_TRAILING_LINE:    RTPrintf("      Default: %RTbool\n", g_Defaults.fForceTrailingLine); break;
                        case SCMOPT_STRIP_TRAILING_BLANKS:  RTPrintf("      Default: %RTbool\n", g_Defaults.fStripTrailingBlanks); break;
                        case SCMOPT_STRIP_TRAILING_LINES:   RTPrintf("      Default: %RTbool\n", g_Defaults.fStripTrailingLines); break;
                        case SCMOPT_ONLY_SVN_DIRS:          RTPrintf("      Default: %RTbool\n", g_Defaults.fOnlySvnDirs); break;
                        case SCMOPT_ONLY_SVN_FILES:         RTPrintf("      Default: %RTbool\n", g_Defaults.fOnlySvnFiles); break;
                        case SCMOPT_SET_SVN_EOL:            RTPrintf("      Default: %RTbool\n", g_Defaults.fSetSvnEol); break;
                        case SCMOPT_SET_SVN_EXECUTABLE:     RTPrintf("      Default: %RTbool\n", g_Defaults.fSetSvnExecutable); break;
                        case SCMOPT_SET_SVN_KEYWORDS:       RTPrintf("      Default: %RTbool\n", g_Defaults.fSetSvnKeywords); break;
                        case SCMOPT_TAB_SIZE:               RTPrintf("      Default: %u\n", g_Defaults.cchTab); break;
                        case SCMOPT_FILTER_OUT_DIRS:        RTPrintf("      Default: %s\n", g_Defaults.pszFilterOutDirs); break;
                        case SCMOPT_FILTER_FILES:           RTPrintf("      Default: %s\n", g_Defaults.pszFilterFiles); break;
                        case SCMOPT_FILTER_OUT_FILES:       RTPrintf("      Default: %s\n", g_Defaults.pszFilterOutFiles); break;
                    }
                    i += fAdvanceTwo;
                }
                return 1;

            case 'q':
                g_iVerbosity = 0;
                break;

            case 'v':
                g_iVerbosity++;
                break;

            case 'V':
            {
                /* The following is assuming that svn does it's job here. */
                static const char s_szRev[] = "$Revision: 35404 $";
                const char *psz = RTStrStripL(strchr(s_szRev, ' '));
                RTPrintf("r%.*s\n", strchr(psz, ' ') - psz, psz);
                return 0;
            }

            case SCMOPT_DIFF_IGNORE_EOL:
                g_fDiffIgnoreEol = true;
                break;
            case SCMOPT_DIFF_NO_IGNORE_EOL:
                g_fDiffIgnoreEol = false;
                break;

            case SCMOPT_DIFF_IGNORE_SPACE:
                g_fDiffIgnoreTrailingWS = g_fDiffIgnoreLeadingWS = true;
                break;
            case SCMOPT_DIFF_NO_IGNORE_SPACE:
                g_fDiffIgnoreTrailingWS = g_fDiffIgnoreLeadingWS = false;
                break;

            case SCMOPT_DIFF_IGNORE_LEADING_SPACE:
                g_fDiffIgnoreLeadingWS = true;
                break;
            case SCMOPT_DIFF_NO_IGNORE_LEADING_SPACE:
                g_fDiffIgnoreLeadingWS = false;
                break;

            case SCMOPT_DIFF_IGNORE_TRAILING_SPACE:
                g_fDiffIgnoreTrailingWS = true;
                break;
            case SCMOPT_DIFF_NO_IGNORE_TRAILING_SPACE:
                g_fDiffIgnoreTrailingWS = false;
                break;

            case SCMOPT_DIFF_SPECIAL_CHARS:
                g_fDiffSpecialChars = true;
                break;
            case SCMOPT_DIFF_NO_SPECIAL_CHARS:
                g_fDiffSpecialChars = false;
                break;

            case VINF_GETOPT_NOT_OPTION:
            {
                if (!g_fDryRun)
                {
                    if (!cProcessed)
                    {
                        RTPrintf("%s: Warning! This program will make changes to your source files and\n"
                                 "%s:          there is a slight risk that bugs or a full disk may cause\n"
                                 "%s:          LOSS OF DATA.   So, please make sure you have checked in\n"
                                 "%s:          all your changes already.  If you didn't, then don't blame\n"
                                 "%s:          anyone for not warning you!\n"
                                 "%s:\n"
                                 "%s:          Press any key to continue...\n",
                                 g_szProgName, g_szProgName, g_szProgName, g_szProgName, g_szProgName,
                                 g_szProgName, g_szProgName);
                        RTStrmGetCh(g_pStdIn);
                    }
                    cProcessed++;
                }
                rc = scmProcessSomething(ValueUnion.psz, pSettings);
                if (RT_FAILURE(rc))
                    return rc;
                break;
            }

            default:
            {
                int rc2 = scmSettingsBaseHandleOpt(&pSettings->Base, rc, &ValueUnion);
                if (RT_SUCCESS(rc2))
                    break;
                if (rc2 != VERR_GETOPT_UNKNOWN_OPTION)
                    return 2;
                return RTGetOptPrintError(rc, &ValueUnion);
            }
        }
    }

    scmSettingsDestroy(pSettings);
    return 0;
}