setup-routines.sh@ 60422

Last change on this file since 60422 was 56295, checked in by vboxsync, 10 years ago
ValidationKit: Updated (C) year.
Property svn:eol-style set to `LF` Property svn:keywords set to `Author Date Id Revision`
File size: 15.4 KB

Line
1	# $Id: setup-routines.sh 56295 2015-06-09 14:29:55Z vboxsync $
2	## @file
3	# VirtualBox Validation Kit - TestBoxScript Service Setup on Solaris.
4	#
5
6	#
7	# Copyright (C) 2006-2015 Oracle Corporation
8	#
9	# This file is part of VirtualBox Open Source Edition (OSE), as
10	# available from http://www.virtualbox.org. This file is free software;
11	# you can redistribute it and/or modify it under the terms of the GNU
12	# General Public License (GPL) as published by the Free Software
13	# Foundation, in version 2 as it comes in the "COPYING" file of the
14	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	#
17	# The contents of this file may alternatively be used under the terms
18	# of the Common Development and Distribution License Version 1.0
19	# (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	# VirtualBox OSE distribution, in which case the provisions of the
21	# CDDL are applicable instead of those of the GPL.
22	#
23	# You may elect to license modified versions of this file under the
24	# terms and conditions of either the GPL or the CDDL or both.
25	#
26
27	#
28	# Detect solaris version.
29	#
30	MY_SOLARIS_VER=`uname -r`
31	case "${MY_SOLARIS_VER}" in
32	5.10) MY_SOLARIS_VER=10;;
33	5.11) MY_SOLARIS_VER=11;;
34	5.12) MY_SOLARIS_VER=12;;
35	*)
36	echo "Your solaris version (${MY_SOLARIS_VER}) is not supported." >&2
37	exit 1;;
38	esac
39
40	#
41	# Overriding setup.sh bits.
42	#
43	MY_FGREP="/usr/xpg4/bin/fgrep" # The other one does grok -q.
44	if [ ! -f "${MY_ETC_SUDOERS}" -a -f "/opt/csw/etc/sudoers" ]; then
45	MY_ETC_SUDOERS=/opt/csw/etc/sudoers # Sudo isn't standard on S10.
46	fi
47
48	#
49	# Solaris variables.
50	#
51	MY_SVC_TMP="/tmp/testboxscript.xml"
52	MY_SVC_FMRI="svc:/system/virtualbox/testboxscript"
53	MY_SVCCFG="/usr/sbin/svccfg"
54	MY_SVCADM="/usr/sbin/svcadm"
55	MY_TR="/usr/bin/tr"
56	MY_TAB=`printf "\t"`
57	if test "${MY_SOLARIS_VER}" -lt 11; then ## No gsed on S10?? ARG!
58	MY_SED="/usr/xpg4/bin/sed"
59	else
60	MY_SED="/usr/bin/gsed"
61	fi
62	if test "${MY_SOLARIS_VER}" -lt 11; then
63	MY_SCREEN="/opt/csw/bin/screen"
64	else
65	MY_SCREEN="screen"
66	fi
67
68
69	check_for_cifs() {
70	if [ ! -f /usr/kernel/fs/amd64/smbfs -a ! -f /usr/kernel/fs/smbfs -a "${MY_SOLARIS_VER}" -ge 11 ]; then
71	echo "error: smbfs client not installed?" >&2
72	echo "Please install smbfs client support:" >&2
73	echo " pkg install system/file-system/smb" >&2
74	echo " svcadm enable svc:/system/idmap" >&2
75	echo " svcadm enable svc:/network/smb/client" >&2
76	echo " svcs svc:/system/idmap" >&2
77	return 1;
78	fi
79	return 0;
80	}
81
82	##
83	# Checks for a boolean option pair --$2/--no-$2 in the XMLARGS variable,
84	# storing the result in the TESTBOXSCRIPT_XXX variable $1.
85	solaris_check_for_option_bool() {
86	MY_TMP=`echo "${XMLARGS} " \| ${MY_SED} -ne "s/^.[ \"]--$2[ \"].\$/yes/p"`
87	if [ -n "${MY_TMP}" ]; then
88	eval $1="yes";
89	fi
90	MY_TMP=`echo "${XMLARGS} " \| ${MY_SED} -ne "s/^.[ \"]--no-$2[ \"].\$/yes/p"`
91	if [ -n "${MY_TMP}" ]; then
92	eval $1="no";
93	fi
94	return 0;
95	}
96
97	##
98	# Checks for an option $2 taking an argument, storing the result in the
99	# TESTBOXSCRIPT_XXX variable $1.
100	solaris_check_for_option_arg() {
101	# ASSUMES no quoted option values nor any escaped spaces.
102	MY_TMP=`echo "${XMLARGS} " \| ${MY_SED} -ne "s/^.[ \"]--$2 $[^ \"]$[ \"].\$/\1/p"`
103	if [ -n "${MY_TMP}" ]; then
104	eval $1="\"${MY_TMP}\"";
105	fi
106	return 0;
107	}
108
109	##
110	# Loads config values from the current installation.
111	#
112	os_load_config() {
113	#
114	# Adjust defaults.
115	#
116	# - Use NFS instead of CIFS because S10 doesn't have smbfs and S11 has
117	# problems getting the password.
118	# - Pass the PATH along so we'll find sudo and other stuff later.
119	#
120	TESTBOXSCRIPT_BUILDS_TYPE="nfs"
121	TESTBOXSCRIPT_TESTRSRC_TYPE="nfs"
122	TESTBOXSCRIPT_ENVVARS[${#TESTBOXSCRIPT_ENVVARS[@]}]="PATH=${PATH}";
123
124	# Load old current.
125	if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then
126	# User. ASSUMES single quoted attribs.
127	MY_TMP=`"${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" \
128	\| ${MY_TR} '\n' ' ' \
129	`;
130	MY_TMP=`echo "${MY_TMP} " \
131	\| ${MY_SED} \
132	-e 's/> */> /g' \
133	-e 's/ *\/>/ \/>/g' \
134	-e 's/^.<method_credential $[^>]$ \/>.*$/\1/' \
135	-e "s/^.user='$[^']$'.*\$/\1/" \
136	`;
137	if [ -n "${MY_TMP}" ]; then
138	TESTBOXSCRIPT_USER="${MY_TMP}";
139	fi
140
141	# Arguments. ASSUMES sub-elements. ASSUMES single quoted attribs.
142	XMLARGS=`"${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" \
143	\| ${MY_TR} '\n' ' ' \
144	`;
145	XMLARGS=`echo "${XMLARGS} " \
146	\| ${MY_SED} \
147	-e 's/> */> /g' \
148	-e 's/ *\/>/ \/>/g' \
149	-e "s/^.<exec_method $[^>]$name='start'$[^>]$>.\$/\1 \2/" \
150	-e "s/^.exec='$[^']$'.*\$/\1/" \
151	-e 's/"/"/g' \
152	-e 's/</</g' \
153	-e 's/>/>/g' \
154	-e 's/&/&/g' \
155	`;
156
157	solaris_check_for_option_arg TESTBOXSCRIPT_SYSTEM_UUID system-uuid
158	solaris_check_for_option_arg TESTBOXSCRIPT_SCRATCH_ROOT scratch-root
159	solaris_check_for_option_arg TESTBOXSCRIPT_TEST_MANAGER test-manager
160	solaris_check_for_option_bool TESTBOXSCRIPT_HWVIRT hwvirt
161	solaris_check_for_option_bool TESTBOXSCRIPT_NESTED_PAGING nested-paging
162	solaris_check_for_option_bool TESTBOXSCRIPT_IOMMU io-mmu
163	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_PATH builds-path
164	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_TYPE builds-server-type
165	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_NAME builds-server-name
166	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_SHARE builds-server-share
167	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_USER builds-server-user
168	solaris_check_for_option_arg TESTBOXSCRIPT_BUILDS_PASSWD builds-server-passwd
169	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_PATH testrsrc-path
170	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_TYPE testrsrc-server-type
171	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_NAME testrsrc-server-name
172	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_SHARE testrsrc-server-share
173	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_USER testrsrc-server-user
174	solaris_check_for_option_arg TESTBOXSCRIPT_TESTRSRC_PASSWD testrsrc-server-passwd
175
176	## @TODO solaris_check_for_option_arg TESTBOXSCRIPT_PYTHON python
177	## @TODO solaris_check_for_option_arg TESTBOXSCRIPT_ENVVARS putenv - Multiple occurences possible.
178	fi
179	}
180
181	##
182	# Adds one or more arguments to MY_ARGV after checking them for conformity.
183	#
184	solaris_add_args() {
185	while [ $# -gt 0 ];
186	do
187	case "$1" in
188	\ )
189	echo "error: Space in option value is not allowed ($1)" >&2
190	exit 1;
191	;;
192	${MY_TAB})
193	echo "error: Tab in option value is not allowed ($1)" >&2
194	exit 1;
195	;;
196	\&)
197	echo "error: Ampersand in option value is not allowed ($1)" >&2
198	exit 1;
199	;;
200	\<)
201	echo "error: Greater-than in option value is not allowed ($1)" >&2
202	exit 1;
203	;;
204	\>)
205	echo "error: Less-than in option value is not allowed ($1)" >&2
206	exit 1;
207	;;
208	*)
209	MY_ARGV="${MY_ARGV} $1";
210	;;
211	esac
212	shift;
213	done
214	return 0;
215	}
216
217	##
218	# Installs, configures and starts the service.
219	#
220	os_install_service() {
221	# Only NFS for S10.
222	if [ "${MY_SOLARIS_VER}" -lt 11 ]; then
223	if [ "${TESTBOXSCRIPT_BUILDS_TYPE}" != "nfs" -o "${TESTBOXSCRIPT_TESTRSRC_TYPE}" != "nfs" ]; then
224	echo "On solaris 10 both share types must be 'nfs', cifs (smbfs) is not supported." >&2
225	return 1;
226	fi
227	fi
228
229	# Calc the command line.
230	MY_ARGV=""
231	if [ -n "${TESTBOXSCRIPT_PYTHON}" ]; then
232	solaris_add_args "${TESTBOXSCRIPT_PYTHON}"
233	fi
234	solaris_add_args "${TESTBOXSCRIPT_DIR}/testboxscript/testboxscript.py"
235
236	if [ "${TESTBOXSCRIPT_HWVIRT}" = "yes" ]; then solaris_add_args "--hwvirt"; fi
237	if [ "${TESTBOXSCRIPT_HWVIRT}" = "no" ]; then solaris_add_args "--no-hwvirt"; fi
238	if [ "${TESTBOXSCRIPT_NESTED_PAGING}" = "yes" ]; then solaris_add_args "--nested-paging"; fi
239	if [ "${TESTBOXSCRIPT_NESTED_PAGING}" = "no" ]; then solaris_add_args "--no-nested-paging"; fi
240	if [ "${TESTBOXSCRIPT_IOMMU}" = "yes" ]; then solaris_add_args "--io-mmu"; fi
241	if [ "${TESTBOXSCRIPT_IOMMU}" = "no" ]; then solaris_add_args "--no-io-mmu"; fi
242	if [ -n "${TESTBOXSCRIPT_SYSTEM_UUID}" ]; then solaris_add_args "--system-uuid" "${TESTBOXSCRIPT_SYSTEM_UUID}"; fi
243	if [ -n "${TESTBOXSCRIPT_TEST_MANAGER}" ]; then solaris_add_args "--test-manager" "${TESTBOXSCRIPT_TEST_MANAGER}"; fi
244	if [ -n "${TESTBOXSCRIPT_SCRATCH_ROOT}" ]; then solaris_add_args "--scratch-root" "${TESTBOXSCRIPT_SCRATCH_ROOT}"; fi
245
246	if [ -n "${TESTBOXSCRIPT_BUILDS_PATH}" ]; then solaris_add_args "--builds-path" "${TESTBOXSCRIPT_BUILDS_PATH}"; fi
247	if [ -n "${TESTBOXSCRIPT_BUILDS_TYPE}" ]; then solaris_add_args "--builds-server-type" "${TESTBOXSCRIPT_BUILDS_TYPE}"; fi
248	if [ -n "${TESTBOXSCRIPT_BUILDS_NAME}" ]; then solaris_add_args "--builds-server-name" "${TESTBOXSCRIPT_BUILDS_NAME}"; fi
249	if [ -n "${TESTBOXSCRIPT_BUILDS_SHARE}" ]; then solaris_add_args "--builds-server-share" "${TESTBOXSCRIPT_BUILDS_SHARE}"; fi
250	if [ -n "${TESTBOXSCRIPT_BUILDS_USER}" ]; then solaris_add_args "--builds-server-user" "${TESTBOXSCRIPT_BUILDS_USER}"; fi
251	if [ -n "${TESTBOXSCRIPT_BUILDS_PASSWD}" ]; then solaris_add_args "--builds-server-passwd" "${TESTBOXSCRIPT_BUILDS_PASSWD}"; fi
252	if [ -n "${TESTBOXSCRIPT_TESTRSRC_PATH}" ]; then solaris_add_args "--testrsrc-path" "${TESTBOXSCRIPT_PATH_TESTRSRC}"; fi
253	if [ -n "${TESTBOXSCRIPT_TESTRSRC_TYPE}" ]; then solaris_add_args "--testrsrc-server-type" "${TESTBOXSCRIPT_TESTRSRC_TYPE}"; fi
254	if [ -n "${TESTBOXSCRIPT_TESTRSRC_NAME}" ]; then solaris_add_args "--testrsrc-server-name" "${TESTBOXSCRIPT_TESTRSRC_NAME}"; fi
255	if [ -n "${TESTBOXSCRIPT_TESTRSRC_SHARE}" ]; then solaris_add_args "--testrsrc-server-share" "${TESTBOXSCRIPT_TESTRSRC_SHARE}"; fi
256	if [ -n "${TESTBOXSCRIPT_TESTRSRC_USER}" ]; then solaris_add_args "--testrsrc-server-user" "${TESTBOXSCRIPT_TESTRSRC_USER}"; fi
257	if [ -n "${TESTBOXSCRIPT_TESTRSRC_PASSWD}" ]; then solaris_add_args "--testrsrc-server-passwd" "${TESTBOXSCRIPT_TESTRSRC_PASSWD}"; fi
258	i=0
259	while [ "${i}" -lt "${#TESTBOXSCRIPT_ENVVARS[@]}" ];
260	do
261	solaris_add_args "--putenv" "${TESTBOXSCRIPT_ENVVARS[${i}]}"
262	i=$((${i} + 1))
263	done
264
265	# Create the service xml config file.
266	cat > "${MY_SVC_TMP}" <<EOF
267	<?xml version='1.0'?>
268	<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
269	<service_bundle type='manifest' name='export'>
270	<service name='system/virtualbox/testboxscript' type='service' version='1'>
271	<create_default_instance enabled='false' />
272	<single_instance/>
273
274	<!-- Wait for the network to start up -->
275	<dependency name='milestone-network' grouping='require_all' restart_on='none' type='service'>
276	<service_fmri value='svc:/milestone/network:default' />
277	</dependency>
278
279	<!-- We wish to be started as late as possible... so go crazy with deps. -->
280	<dependency name='milestone-devices' grouping='require_all' restart_on='none' type='service'>
281	<service_fmri value='svc:/milestone/devices:default' />
282	</dependency>
283	<dependency name='multi-user' grouping='require_all' restart_on='none' type='service'>
284	<service_fmri value='svc:/milestone/multi-user:default' />
285	</dependency>
286	<dependency name='multi-user-server' grouping='require_all' restart_on='none' type='service'>
287	<service_fmri value='svc:/milestone/multi-user-server:default' />
288	</dependency>
289	<dependency name='filesystem-local' grouping='require_all' restart_on='none' type='service'>
290	<service_fmri value='svc:/system/filesystem/local:default' />
291	</dependency>
292	<dependency name='filesystem-autofs' grouping='require_all' restart_on='none' type='service'>
293	<service_fmri value='svc:/system/filesystem/autofs:default' />
294	</dependency>
295	EOF
296	if [ "`uname -r`" = "5.10" ]; then # Seems to be gone in S11?
297	cat >> "${MY_SVC_TMP}" <<EOF
298	<dependency name='filesystem-volfs' grouping='require_all' restart_on='none' type='service'>
299	<service_fmri value='svc:/system/filesystem/volfs:default' />
300	</dependency>
301	EOF
302	fi
303	cat >> "${MY_SVC_TMP}" <<EOF
304	<!-- start + stop methods -->
305	<exec_method type='method' name='start' exec='${MY_SCREEN} -S testboxscript -d -m ${MY_ARGV}'
306	timeout_seconds='30'>
307	<method_context working_directory='${TESTBOXSCRIPT_DIR}'>
308	<method_credential user='${TESTBOXSCRIPT_USER}' />
309	<method_environment>
310	<envvar name='PATH' value='${PATH}' />
311	</method_environment>
312	</method_context>
313	</exec_method>
314
315	<exec_method type='method' name='stop' exec=':kill' timeout_seconds='60' />
316
317	<property_group name='startd' type='framework'>
318	<!-- sub-process core dumps/signals should not restart session -->
319	<propval name='ignore_error' type='astring' value='core,signal' />
320	</property_group>
321
322	<!-- Description -->
323	<template>
324	<common_name>
325	<loctext xml:lang='C'>VirtualBox TestBox Script</loctext>
326	</common_name>
327	</template>
328	</service>
329	</service_bundle>
330	EOF
331
332	# Install the service, replacing old stuff.
333	if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then
334	"${MY_SVCCFG}" "delete" "${MY_SVC_FMRI}"
335	fi
336	"${MY_SVCCFG}" "import" "${MY_SVC_TMP}"
337	rm -f "${MY_SVC_TMP}"
338	return 0;
339	}
340
341	os_enable_service() {
342	"${MY_SVCADM}" "enable" "${MY_SVC_FMRI}"
343	return 0;
344	}
345
346	os_disable_service() {
347	if "${MY_SVCCFG}" "export" "${MY_SVC_FMRI}" > /dev/null 2>&1; then
348	"${MY_SVCADM}" "disable" "${MY_SVC_FMRI}"
349	sleep 1
350	fi
351	return 0;
352	}
353
354	os_add_user() {
355	useradd -m -s /usr/bin/bash -G staff "${TESTBOXSCRIPT_USER}"
356	passwd "${TESTBOXSCRIPT_USER}" # This sucker prompts, seemingly no way around that.
357	return 0;
358	}
359
360
361	maybe_hush_up_root_login() {
362	# We don't want /etc/profile to display /etc/motd, quotas and mail status
363	# every time we do sudo -i... It may screw up serious if we parse the
364	# output of the command we sudid.
365	> ~root/.hushlogin
366	return 0;
367	}
368
369	os_final_message() {
370	cat <<EOF
371
372	Additional things to do:"
373	1. Configure NTP:
374	a) echo "server wei01-time.de.oracle.com" > /etc/inet/ntp.conf
375	echo "driftfile /var/ntp/ntp.drift" >> /etc/inet/ntp.conf
376	b) Enable the service: svcadm enable ntp
377	c) Sync once in case of big diff: ntpdate wei01-time.de.oracle.com
378	d) Check that it works: ntpq -p
379
380	Enjoy!
381	EOF
382	}
383

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ValidationKit/testboxscript/solaris/setup-routines.sh@ 60422

Download in other formats: