#!/bin/bash # $Id: testbox-maintenance.sh 76553 2019-01-01 01:45:53Z vboxsync $ ## @file # VirtualBox Validation Kit - testbox mainenance service # # # Copyright (C) 2006-2019 Oracle Corporation # # This file is part of VirtualBox Open Source Edition (OSE), as # available from http://www.virtualbox.org. This file is free software; # you can redistribute it and/or modify it under the terms of the GNU # General Public License (GPL) as published by the Free Software # Foundation, in version 2 as it comes in the "COPYING" file of the # VirtualBox OSE distribution. VirtualBox OSE is distributed in the # hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. # # The contents of this file may alternatively be used under the terms # of the Common Development and Distribution License Version 1.0 # (CDDL) only, as it comes in the "COPYING.CDDL" file of the # VirtualBox OSE distribution, in which case the provisions of the # CDDL are applicable instead of those of the GPL. # # You may elect to license modified versions of this file under the # terms and conditions of either the GPL or the CDDL or both. # # # Global Variables (config first). # MY_REBOOT_WHEN_DONE="yes" #MY_REBOOT_WHEN_DONE="" # enable this for debugging the script MY_TFTP_ROOT="/mnt/testbox-tftp" MY_BACKUP_ROOT="/mnt/testbox-backup" MY_BACKUP_MNT_TEST_FILE="/mnt/testbox-backup/testbox-backup" MY_GLOBAL_LOG_FILE="${MY_BACKUP_ROOT}/maintenance.log" MY_DD_BLOCK_SIZE=256K MY_IP="" MY_BACKUP_DIR="" MY_LOG_FILE="" MY_PXELINUX_CFG_FILE="" ## # Info message. # InfoMsg() { echo $*; if test -n "${MY_LOG_FILE}"; then echo "`date -uIsec`: ${MY_IP}: info:" $* >> ${MY_LOG_FILE}; fi } ## # Error message and reboot+exit. First argument is exit code. # ErrorMsgExit() { MY_RET=$1 shift echo "testbox-maintenance.sh: error:" $* >&2; # Append to the testbox log. if test -n "${MY_LOG_FILE}"; then echo "`date -uIsec`: ${MY_IP}: error:" $* >> "${MY_LOG_FILE}"; fi # Append to the global log. if test -f "${MY_BACKUP_MNT_TEST_FILE}"; then echo "`date -uIsec`: ${MY_IP}: error:" $* >> "${MY_GLOBAL_LOG_FILE}"; fi # # On error we normally wait 5min before rebooting to avoid repeating the # same error too many time before the admin finds out. We choose NOT to # remove the PXE config file here because (a) the admin might otherwise # not notice something went wrong, (b) the system could easily be in a # weird unbootable state, (c) the problem might be temporary. # # While debugging, we just exit here. # if test -n "${MY_REBOOT_WHEN_DONE}"; then sleep 5m echo "testbox-maintenance.sh: rebooting (after error)" >&2; reboot fi exit ${MY_RET} } # # Try figure out the IP address of the box and the hostname from it again. # MY_IP=` hostname -I | cut -f1 -d' ' | head -1 ` if test -z "${MY_IP}" -o `echo "${MY_IP}" | wc -w` -ne "1" -o "${MY_IP}" = "127.0.0.1"; then ErrorMsgExit 10 "Failed to get a good IP! (MY_IP=${MY_IP})" fi MY_HOSTNAME=`getent hosts "${MY_IP}" | sed -s 's/[[:space:]][[:space:]]*/ /g' | cut -d' ' -f2 ` if test -z "${MY_HOSTNAME}"; then MY_HOSTNAME="unknown"; fi # Derive the backup dir and log file name from it. if test ! -f "${MY_BACKUP_MNT_TEST_FILE}"; then mount "${MY_BACKUP_ROOT}" if test ! -f "${MY_BACKUP_MNT_TEST_FILE}"; then echo "Retrying mounting '${MY_BACKUP_ROOT}' in 15 seconds..." >&2 sleep 15 mount "${MY_BACKUP_ROOT}" fi if test ! -f "${MY_BACKUP_MNT_TEST_FILE}"; then ErrorMsgExit 11 "Backup directory is not mounted." fi fi MY_BACKUP_DIR="${MY_BACKUP_ROOT}/${MY_IP}" MY_LOG_FILE="${MY_BACKUP_DIR}/maintenance.log" mkdir -p "${MY_BACKUP_DIR}" echo "================ `date -uIsec`: ${MY_IP}: ${MY_HOSTNAME} starts a new session ================" >> "${MY_LOG_FILE}" echo "`date -uIsec`: ${MY_IP}: ${MY_HOSTNAME} says hi." >> "${MY_GLOBAL_LOG_FILE}" InfoMsg "MY_IP=${MY_IP}" # # Redirect stderr+stdout thru tee and to a log file on the server. # MY_OUTPUT_LOG_FILE="${MY_BACKUP_DIR}/maintenance-output.log" echo "" >> "${MY_OUTPUT_LOG_FILE}" echo "================ `date -uIsec`: ${MY_IP}: ${MY_HOSTNAME} starts a new session ================" >> "${MY_OUTPUT_LOG_FILE}" exec &> >(tee -a "${MY_OUTPUT_LOG_FILE}") # # Convert the IP address to PXELINUX hex format, then check that we've got # a config file on the TFTP share that we later can remove. We consider it a # fatal failure if we don't because we've probably got the wrong IP and we'll # be stuck doing the same stuff over and over again. # MY_TMP=`echo "${MY_IP}" | sed -e 's/\./ /g' ` MY_IP_HEX=`printf "%02X%02X%02X%02X" ${MY_TMP}` InfoMsg "MY_IP_HEX=${MY_IP_HEX}" if test ! -f "${MY_TFTP_ROOT}/pxelinux.0"; then mount "${MY_TFTP_ROOT}" if test ! -f "${MY_TFTP_ROOT}/pxelinux.0"; then echo "Retrying mounting '${MY_TFTP_ROOT}' in 15 seconds..." >&2 sleep 15 mount "${MY_BACKUP_ROOT}" fi if test ! -f "${MY_TFTP_ROOT}/pxelinux.0"; then ErrorMsgExit 12 "TFTP share mounted or mixxing pxelinux.0 in the root." fi fi MY_PXELINUX_CFG_FILE="${MY_TFTP_ROOT}/pxelinux.cfg/${MY_IP_HEX}" if test ! -f "${MY_PXELINUX_CFG_FILE}"; then ErrorMsgExit 13 "No pxelinux.cfg file found (${MY_PXELINUX_CFG_FILE}) - wrong IP?" fi # # Dig the action out of from the kernel command line. # if test -n "${MY_REBOOT_WHEN_DONE}"; then InfoMsg "/proc/cmdline: `cat /proc/cmdline`" set `cat /proc/cmdline` else InfoMsg "Using script command line: $*" fi MY_ACTION=not-found while test $# -ge 1; do case "$1" in testbox-action-*) MY_ACTION="$1" ;; esac shift done if test "${MY_ACTION}" = "not-found"; then ErrorMsgExit 14 "No action given. Expected testbox-action-backup, testbox-action-backup-again, testbox-action-restore," \ "testbox-action-refresh-info, or testbox-action-rescue on the kernel command line."; fi # Validate and shorten the action. case "${MY_ACTION}" in testbox-action-backup) MY_ACTION="backup"; ;; testbox-action-backup-again) MY_ACTION="backup-again"; ;; testbox-action-restore) MY_ACTION="restore"; ;; testbox-action-refresh-info) MY_ACTION="refresh-info"; ;; testbox-action-rescue) MY_ACTION="rescue"; ;; *) ErrorMsgExit 15 "Invalid action '${MY_ACTION}'"; ;; esac # Log the action in both logs. echo "`date -uIsec`: ${MY_IP}: info: Executing '${MY_ACTION}'." >> "${MY_GLOBAL_LOG_FILE}"; # # Generate missing info for this testbox if backing up. # MY_INFO_FILE="${MY_BACKUP_DIR}/testbox-info.txt" if test '!' -f "${MY_INFO_FILE}" \ -o "${MY_ACTION}" = "backup" \ -o "${MY_ACTION}" = "backup-again" \ -o "${MY_ACTION}" = "refresh-info" ; then echo "IP: ${MY_IP}" > ${MY_INFO_FILE}; echo "HEX-IP: ${MY_IP_HEX}" >> ${MY_INFO_FILE}; echo "Hostname: ${MY_HOSTNAME}" >> ${MY_INFO_FILE}; echo "" >> ${MY_INFO_FILE}; echo "**** cat /proc/cpuinfo ****" >> ${MY_INFO_FILE}; echo "**** cat /proc/cpuinfo ****" >> ${MY_INFO_FILE}; echo "**** cat /proc/cpuinfo ****" >> ${MY_INFO_FILE}; cat /proc/cpuinfo >> ${MY_INFO_FILE}; echo "" >> ${MY_INFO_FILE}; echo "**** lspci -vvv ****" >> ${MY_INFO_FILE}; echo "**** lspci -vvv ****" >> ${MY_INFO_FILE}; echo "**** lspci -vvv ****" >> ${MY_INFO_FILE}; lspci -vvv >> ${MY_INFO_FILE} 2>&1; echo "" >> ${MY_INFO_FILE}; echo "**** biosdecode ****" >> ${MY_INFO_FILE}; echo "**** biosdecode ****" >> ${MY_INFO_FILE}; echo "**** biosdecode ****" >> ${MY_INFO_FILE}; biosdecode >> ${MY_INFO_FILE} 2>&1; echo "" >> ${MY_INFO_FILE}; echo "**** dmidecode ****" >> ${MY_INFO_FILE}; echo "**** dmidecode ****" >> ${MY_INFO_FILE}; echo "**** dmidecode ****" >> ${MY_INFO_FILE}; dmidecode >> ${MY_INFO_FILE} 2>&1; echo "" >> ${MY_INFO_FILE}; echo "**** fdisk -l ****" >> ${MY_INFO_FILE}; echo "**** fdisk -l ****" >> ${MY_INFO_FILE}; echo "**** fdisk -l ****" >> ${MY_INFO_FILE}; fdisk -l >> ${MY_INFO_FILE} 2>&1; echo "" >> ${MY_INFO_FILE}; echo "**** dmesg ****" >> ${MY_INFO_FILE}; echo "**** dmesg ****" >> ${MY_INFO_FILE}; echo "**** dmesg ****" >> ${MY_INFO_FILE}; dmesg >> ${MY_INFO_FILE} 2>&1; # # Get the raw ACPI tables and whatnot since we can. Use zip as tar will # zero pad virtual files due to wrong misleading size returned by stat (4K). # # Note! /sys/firmware/dmi/entries/15-0/system_event_log/raw_event_log has been # see causing fatal I/O errors, so skip all raw_event_log files. # zip -qr9 "${MY_BACKUP_DIR}/testbox-info.zip" \ /proc/cpuinfo \ /sys/firmware/ \ -x "*/raw_event_log" fi if test '!' -f "${MY_BACKUP_DIR}/${MY_HOSTNAME}" -a "${MY_HOSTNAME}" != "unknown"; then echo "${MY_HOSTNAME}" > "${MY_BACKUP_DIR}/${MY_HOSTNAME}" fi if test '!' -f "${MY_BACKUP_DIR}/${MY_IP_HEX}"; then echo "${MY_IP}" > "${MY_BACKUP_DIR}/${MY_IP_HEX}" fi # # Assemble a list of block devices using /sys/block/* and some filtering. # if test -f "${MY_BACKUP_DIR}/disk-devices.lst"; then MY_BLOCK_DEVS=`cat ${MY_BACKUP_DIR}/disk-devices.lst \ | sed -e 's/[[:space:]][::space::]]*/ /g' -e 's/^[[:space:]]*//' -e 's/[[:space:]]*$//' `; if test -z "${MY_BLOCK_DEVS}"; then ErrorMsgExit 17 "No block devices found via sys/block." fi InfoMsg "disk-device.lst: MY_BLOCK_DEVS=${MY_BLOCK_DEVS}"; else MY_BLOCK_DEVS=""; for MY_DEV in `ls /sys/block`; do case "${MY_DEV}" in [sh]d*) MY_BLOCK_DEVS="${MY_BLOCK_DEVS} ${MY_DEV}" ;; *) InfoMsg "Ignoring /sys/block/${MY_DEV}"; ;; esac done if test -z "${MY_BLOCK_DEVS}"; then ErrorMsgExit 17 "No block devices found via /sys/block." fi InfoMsg "/sys/block: MY_BLOCK_DEVS=${MY_BLOCK_DEVS}"; fi # # Take action # case "${MY_ACTION}" in # # Create a backup. The 'backup' action refuses to overwrite an # existing backup, but is otherwise identical to 'backup-again'. # backup|backup-again) for MY_DEV in ${MY_BLOCK_DEVS}; do MY_DST="${MY_BACKUP_DIR}/${MY_DEV}.gz" if test -f "${MY_DST}"; then if test "${MY_ACTION}" != 'backup-again'; then ErrorMsgExit 18 "${MY_DST} already exists" fi InfoMsg "${MY_DST} already exists" fi done # Do the backing up. for MY_DEV in ${MY_BLOCK_DEVS}; do MY_SRC="/dev/${MY_DEV}" MY_DST="${MY_BACKUP_DIR}/${MY_DEV}.gz" if test -f "${MY_DST}"; then mv -f "${MY_DST}" "${MY_DST}.old"; fi if test -b "${MY_SRC}"; then InfoMsg "Backing up ${MY_SRC} to ${MY_DST}..."; dd if="${MY_SRC}" bs=${MY_DD_BLOCK_SIZE} | gzip -c > "${MY_DST}"; MY_RCS=("${PIPESTATUS[@]}"); if test "${MY_RCS[0]}" -eq 0 -a "${MY_RCS[1]}" -eq 0; then InfoMsg "Successfully backed up ${MY_SRC} to ${MY_DST}"; else rm -f "${MY_DST}"; ErrorMsgExit 19 "There was a problem backing up ${MY_SRC} to ${MY_DST}: dd => ${MY_RCS[0]}; gzip => ${MY_RCS[1]}"; fi else InfoMsg "Skipping ${MY_SRC} as it either doesn't exist or isn't a block device"; fi done ;; # # Restore existing. # restore) for MY_DEV in ${MY_BLOCK_DEVS}; do MY_SRC="${MY_BACKUP_DIR}/${MY_DEV}.gz" MY_DST="/dev/${MY_DEV}" if test -b "${MY_DST}"; then if test -f "${MY_SRC}"; then InfoMsg "Restoring ${MY_SRC} onto ${MY_DST}..."; gunzip -c "${MY_SRC}" | dd of="${MY_DST}" bs=${MY_DD_BLOCK_SIZE} iflag=fullblock; MY_RCS=("${PIPESTATUS[@]}"); if test ${MY_RCS[0]} -eq 0 -a ${MY_RCS[1]} -eq 0; then InfoMsg "Successfully restored ${MY_SRC} onto ${MY_DST}"; else ErrorMsgExit 20 "There was a problem restoring ${MY_SRC} onto ${MY_DST}: dd => ${MY_RCS[1]}; gunzip => ${MY_RCS[0]}"; fi else InfoMsg "Skipping ${MY_DST} because ${MY_SRC} does not exist."; fi else InfoMsg "Skipping ${MY_DST} as it either doesn't exist or isn't a block device."; fi done ;; # # Nothing else to do for refresh-info. # refresh-info) ;; # # For the rescue action, we just quit without removing the PXE config or # rebooting the box. The admin will do that once the system has been rescued. # rescue) InfoMsg "rescue: exiting. Admin must remove PXE config and reboot manually when done." exit 0; ;; *) ErrorMsgExit 98 "Huh? MY_ACTION='${MY_ACTION}'" ;; esac # # If we get here, remove the PXE config and reboot immediately. # InfoMsg "'${MY_ACTION}' - done"; if test -n "${MY_REBOOT_WHEN_DONE}"; then sync if rm -f "${MY_PXELINUX_CFG_FILE}"; then InfoMsg "removed ${MY_PXELINUX_CFG_FILE}"; else ErrorMsgExit 99 "failed to remove ${MY_PXELINUX_CFG_FILE}"; fi sync InfoMsg "rebooting"; reboot fi exit 0