HWACCMR0Mixed.mac@ 39333

Last change on this file since 39333 was 30414, checked in by vboxsync, 14 years ago
Save and restore the TSS limit on 64-bit hosts too.
Property svn:eol-style set to `native` Property svn:keywords set to `Id`
File size: 25.3 KB

Line
1	; $Id: HWACCMR0Mixed.mac 30414 2010-06-24 08:46:18Z vboxsync $
2	;; @file
3	; HWACCMR0Mixed.mac - Stuff that darwin needs to build two versions of.
4	;
5	; Included by HWACCMR0A.asm with RT_ARCH_AMD64 defined or or undefined.
6	;
7
8	;
9	; Copyright (C) 2006-2007 Oracle Corporation
10	;
11	; This file is part of VirtualBox Open Source Edition (OSE), as
12	; available from http://www.virtualbox.org. This file is free software;
13	; you can redistribute it and/or modify it under the terms of the GNU
14	; General Public License (GPL) as published by the Free Software
15	; Foundation, in version 2 as it comes in the "COPYING" file of the
16	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
17	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
18	;
19
20
21	;/**
22	; * Prepares for and executes VMLAUNCH/VMRESUME (32 bits guest mode)
23	; *
24	; * @returns VBox status code
25	; * @param fResume x86:[ebp+8], msc:rcx,gcc:rdi vmlauch/vmresume
26	; * @param pCtx x86:[ebp+c], msc:rdx,gcc:rsi Guest context
27	; * @param pCache x86:[esp+10],msc:r8, gcc:rdx VMCS cache
28	; */
29	ALIGNCODE(16)
30	BEGINPROC MY_NAME(VMXR0StartVM32)
31	push xBP
32	mov xBP, xSP
33
34	pushf
35	cli
36
37	;/* Save all general purpose host registers. */
38	MYPUSHAD
39
40	;/* First we have to save some final CPU context registers. */
41	mov eax, VMX_VMCS_HOST_RIP
42	%ifdef RT_ARCH_AMD64
43	lea r10, [.vmlaunch_done wrt rip]
44	vmwrite rax, r10
45	%else
46	mov ecx, .vmlaunch_done
47	vmwrite eax, ecx
48	%endif
49	;/* Note: assumes success... */
50
51	;/* Manual save and restore:
52	; * - General purpose registers except RIP, RSP
53	; *
54	; * Trashed:
55	; * - CR2 (we don't care)
56	; * - LDTR (reset to 0)
57	; * - DRx (presumably not changed at all)
58	; * - DR7 (reset to 0x400)
59	; * - EFLAGS (reset to RT_BIT(1); not relevant)
60	; *
61	; */
62
63	;/* Save the Guest CPU context pointer. */
64	%ifdef RT_ARCH_AMD64
65	%ifdef ASM_CALL64_GCC
66	; fResume already in rdi
67	; pCtx already in rsi
68	mov rbx, rdx ; pCache
69	%else
70	mov rdi, rcx ; fResume
71	mov rsi, rdx ; pCtx
72	mov rbx, r8 ; pCache
73	%endif
74	%else
75	mov edi, [ebp + 8] ; fResume
76	mov esi, [ebp + 12] ; pCtx
77	mov ebx, [ebp + 16] ; pCache
78	%endif
79
80	;/* Save segment registers */
81	; Note: MYPUSHSEGS trashes rdx & rcx, so we moved it here (msvc amd64 case)
82	MYPUSHSEGS xAX, ax
83
84	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
85	mov ecx, [xBX + VMCSCACHE.Write.cValidEntries]
86	cmp ecx, 0
87	je .no_cached_writes
88	mov edx, ecx
89	mov ecx, 0
90	jmp .cached_write
91
92	ALIGN(16)
93	.cached_write:
94	mov eax, [xBX + VMCSCACHE.Write.aField + xCX*4]
95	vmwrite xAX, [xBX + VMCSCACHE.Write.aFieldVal + xCX*8]
96	inc xCX
97	cmp xCX, xDX
98	jl .cached_write
99
100	mov dword [xBX + VMCSCACHE.Write.cValidEntries], 0
101	.no_cached_writes:
102
103	; Save the pCache pointer
104	push xBX
105	%endif
106
107	; Save the pCtx pointer
108	push xSI
109
110	; Save LDTR
111	xor eax, eax
112	sldt ax
113	push xAX
114
115	; The TR limit is reset to 0x67; restore it manually
116	str eax
117	push xAX
118
119	; VMX only saves the base of the GDTR & IDTR and resets the limit to 0xffff; we must restore the limit correctly!
120	sub xSP, xS*2
121	sgdt [xSP]
122
123	sub xSP, xS*2
124	sidt [xSP]
125
126	%ifdef VBOX_WITH_DR6_EXPERIMENT
127	; Restore DR6 - experiment, not safe!
128	mov xBX, [xSI + CPUMCTX.dr6]
129	mov dr6, xBX
130	%endif
131
132	; Restore CR2
133	mov ebx, [xSI + CPUMCTX.cr2]
134	mov cr2, xBX
135
136	mov eax, VMX_VMCS_HOST_RSP
137	vmwrite xAX, xSP
138	;/* Note: assumes success... */
139	;/* Don't mess with ESP anymore!! */
140
141	;/* Restore Guest's general purpose registers. */
142	mov eax, [xSI + CPUMCTX.eax]
143	mov ebx, [xSI + CPUMCTX.ebx]
144	mov ecx, [xSI + CPUMCTX.ecx]
145	mov edx, [xSI + CPUMCTX.edx]
146	mov ebp, [xSI + CPUMCTX.ebp]
147
148	; resume or start?
149	cmp xDI, 0 ; fResume
150	je .vmlauch_lauch
151
152	;/* Restore edi & esi. */
153	mov edi, [xSI + CPUMCTX.edi]
154	mov esi, [xSI + CPUMCTX.esi]
155
156	vmresume
157	jmp .vmlaunch_done; ;/* here if vmresume detected a failure. */
158
159	.vmlauch_lauch:
160	;/* Restore edi & esi. */
161	mov edi, [xSI + CPUMCTX.edi]
162	mov esi, [xSI + CPUMCTX.esi]
163
164	vmlaunch
165	jmp .vmlaunch_done; ;/* here if vmlaunch detected a failure. */
166
167	ALIGNCODE(16) ;; @todo YASM BUG - this alignment is wrong on darwin, it's 1 byte off.
168	.vmlaunch_done:
169	jc near .vmxstart_invalid_vmxon_ptr
170	jz near .vmxstart_start_failed
171
172	; Restore base and limit of the IDTR & GDTR
173	lidt [xSP]
174	add xSP, xS*2
175	lgdt [xSP]
176	add xSP, xS*2
177
178	push xDI
179	mov xDI, [xSP + xS * 3] ; pCtx (*3 to skip the saved LDTR + TR)
180
181	mov [ss:xDI + CPUMCTX.eax], eax
182	mov [ss:xDI + CPUMCTX.ebx], ebx
183	mov [ss:xDI + CPUMCTX.ecx], ecx
184	mov [ss:xDI + CPUMCTX.edx], edx
185	mov [ss:xDI + CPUMCTX.esi], esi
186	mov [ss:xDI + CPUMCTX.ebp], ebp
187	%ifdef RT_ARCH_AMD64
188	pop xAX ; the guest edi we pushed above
189	mov dword [ss:xDI + CPUMCTX.edi], eax
190	%else
191	pop dword [ss:xDI + CPUMCTX.edi] ; the guest edi we pushed above
192	%endif
193
194	%ifdef VBOX_WITH_DR6_EXPERIMENT
195	; Save DR6 - experiment, not safe!
196	mov xAX, dr6
197	mov [ss:xDI + CPUMCTX.dr6], xAX
198	%endif
199
200	; Restore TSS selector; must mark it as not busy before using ltr (!)
201	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
202	; @todo get rid of sgdt
203	pop xBX ; saved TR
204	sub xSP, xS*2
205	sgdt [xSP]
206	mov xAX, xBX
207	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
208	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
209	and dword [ss:xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
210	ltr bx
211	add xSP, xS*2
212
213	pop xAX ; saved LDTR
214	lldt ax
215
216	add xSP, xS ; pCtx
217
218	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
219	pop xDX ; saved pCache
220
221	mov ecx, [ss:xDX + VMCSCACHE.Read.cValidEntries]
222	cmp ecx, 0 ; can't happen
223	je .no_cached_reads
224	jmp .cached_read
225
226	ALIGN(16)
227	.cached_read:
228	dec xCX
229	mov eax, [ss:xDX + VMCSCACHE.Read.aField + xCX*4]
230	vmread [ss:xDX + VMCSCACHE.Read.aFieldVal + xCX*8], xAX
231	cmp xCX, 0
232	jnz .cached_read
233	.no_cached_reads:
234
235	; Save CR2 for EPT
236	mov xAX, cr2
237	mov [ss:xDX + VMCSCACHE.cr2], xAX
238	%endif
239
240	; Restore segment registers
241	MYPOPSEGS xAX, ax
242
243	; Restore general purpose registers
244	MYPOPAD
245
246	mov eax, VINF_SUCCESS
247
248	.vmstart_end:
249	popf
250	pop xBP
251	ret
252
253
254	.vmxstart_invalid_vmxon_ptr:
255	; Restore base and limit of the IDTR & GDTR
256	lidt [xSP]
257	add xSP, xS*2
258	lgdt [xSP]
259	add xSP, xS*2
260
261	; Restore TSS selector; must mark it as not busy before using ltr (!)
262	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
263	; @todo get rid of sgdt
264	pop xBX ; saved TR
265	sub xSP, xS*2
266	sgdt [xSP]
267	mov xAX, xBX
268	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
269	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
270	and dword [ss:xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
271	ltr bx
272	add xSP, xS*2
273
274	pop xAX ; saved LDTR
275	lldt ax
276
277	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
278	add xSP, xS*2 ; pCtx + pCache
279	%else
280	add xSP, xS ; pCtx
281	%endif
282
283	; Restore segment registers
284	MYPOPSEGS xAX, ax
285
286	; Restore all general purpose host registers.
287	MYPOPAD
288	mov eax, VERR_VMX_INVALID_VMXON_PTR
289	jmp .vmstart_end
290
291	.vmxstart_start_failed:
292	; Restore base and limit of the IDTR & GDTR
293	lidt [xSP]
294	add xSP, xS*2
295	lgdt [xSP]
296	add xSP, xS*2
297
298	; Restore TSS selector; must mark it as not busy before using ltr (!)
299	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
300	; @todo get rid of sgdt
301	pop xBX ; saved TR
302	sub xSP, xS*2
303	sgdt [xSP]
304	mov xAX, xBX
305	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
306	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
307	and dword [ss:xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
308	ltr bx
309	add xSP, xS*2
310
311	pop xAX ; saved LDTR
312	lldt ax
313
314	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
315	add xSP, xS*2 ; pCtx + pCache
316	%else
317	add xSP, xS ; pCtx
318	%endif
319
320	; Restore segment registers
321	MYPOPSEGS xAX, ax
322
323	; Restore all general purpose host registers.
324	MYPOPAD
325	mov eax, VERR_VMX_UNABLE_TO_START_VM
326	jmp .vmstart_end
327
328	ENDPROC MY_NAME(VMXR0StartVM32)
329
330	%ifdef RT_ARCH_AMD64
331	;/**
332	; * Prepares for and executes VMLAUNCH/VMRESUME (64 bits guest mode)
333	; *
334	; * @returns VBox status code
335	; * @param fResume msc:rcx, gcc:rdi vmlauch/vmresume
336	; * @param pCtx msc:rdx, gcc:rsi Guest context
337	; * @param pCache msc:r8, gcc:rdx VMCS cache
338	; */
339	ALIGNCODE(16)
340	BEGINPROC MY_NAME(VMXR0StartVM64)
341	push xBP
342	mov xBP, xSP
343
344	pushf
345	cli
346
347	;/* Save all general purpose host registers. */
348	MYPUSHAD
349
350	;/* First we have to save some final CPU context registers. */
351	lea r10, [.vmlaunch64_done wrt rip]
352	mov rax, VMX_VMCS_HOST_RIP ;/* return address (too difficult to continue after VMLAUNCH?) */
353	vmwrite rax, r10
354	;/* Note: assumes success... */
355
356	;/* Manual save and restore:
357	; * - General purpose registers except RIP, RSP
358	; *
359	; * Trashed:
360	; * - CR2 (we don't care)
361	; * - LDTR (reset to 0)
362	; * - DRx (presumably not changed at all)
363	; * - DR7 (reset to 0x400)
364	; * - EFLAGS (reset to RT_BIT(1); not relevant)
365	; *
366	; */
367
368	;/* Save the Guest CPU context pointer. */
369	%ifdef ASM_CALL64_GCC
370	; fResume already in rdi
371	; pCtx already in rsi
372	mov rbx, rdx ; pCache
373	%else
374	mov rdi, rcx ; fResume
375	mov rsi, rdx ; pCtx
376	mov rbx, r8 ; pCache
377	%endif
378
379	;/* Save segment registers */
380	; Note: MYPUSHSEGS trashes rdx & rcx, so we moved it here (msvc amd64 case)
381	MYPUSHSEGS xAX, ax
382
383	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
384	mov ecx, [xBX + VMCSCACHE.Write.cValidEntries]
385	cmp ecx, 0
386	je .no_cached_writes
387	mov edx, ecx
388	mov ecx, 0
389	jmp .cached_write
390
391	ALIGN(16)
392	.cached_write:
393	mov eax, [xBX + VMCSCACHE.Write.aField + xCX*4]
394	vmwrite xAX, [xBX + VMCSCACHE.Write.aFieldVal + xCX*8]
395	inc xCX
396	cmp xCX, xDX
397	jl .cached_write
398
399	mov dword [xBX + VMCSCACHE.Write.cValidEntries], 0
400	.no_cached_writes:
401
402	; Save the pCache pointer
403	push xBX
404	%endif
405
406	; Save the host LSTAR, CSTAR, SFMASK & KERNEL_GSBASE MSRs and restore the guest MSRs
407	;; @todo use the automatic load feature for MSRs
408	LOADGUESTMSR MSR_K8_LSTAR, CPUMCTX.msrLSTAR
409	%if 0 ; not supported on Intel CPUs
410	LOADGUESTMSR MSR_K8_CSTAR, CPUMCTX.msrCSTAR
411	%endif
412	LOADGUESTMSR MSR_K6_STAR, CPUMCTX.msrSTAR
413	LOADGUESTMSR MSR_K8_SF_MASK, CPUMCTX.msrSFMASK
414	LOADGUESTMSR MSR_K8_KERNEL_GS_BASE, CPUMCTX.msrKERNELGSBASE
415
416	; Save the pCtx pointer
417	push xSI
418
419	; Save LDTR
420	xor eax, eax
421	sldt ax
422	push xAX
423
424	; The TR limit is reset to 0x67; restore it manually
425	str eax
426	push xAX
427
428	; VMX only saves the base of the GDTR & IDTR and resets the limit to 0xffff; we must restore the limit correctly!
429	sub xSP, xS*2
430	sgdt [xSP]
431
432	sub xSP, xS*2
433	sidt [xSP]
434
435	%ifdef VBOX_WITH_DR6_EXPERIMENT
436	; Restore DR6 - experiment, not safe!
437	mov xBX, [xSI + CPUMCTX.dr6]
438	mov dr6, xBX
439	%endif
440
441	; Restore CR2
442	mov rbx, qword [xSI + CPUMCTX.cr2]
443	mov cr2, rbx
444
445	mov eax, VMX_VMCS_HOST_RSP
446	vmwrite xAX, xSP
447	;/* Note: assumes success... */
448	;/* Don't mess with ESP anymore!! */
449
450	;/* Restore Guest's general purpose registers. */
451	mov rax, qword [xSI + CPUMCTX.eax]
452	mov rbx, qword [xSI + CPUMCTX.ebx]
453	mov rcx, qword [xSI + CPUMCTX.ecx]
454	mov rdx, qword [xSI + CPUMCTX.edx]
455	mov rbp, qword [xSI + CPUMCTX.ebp]
456	mov r8, qword [xSI + CPUMCTX.r8]
457	mov r9, qword [xSI + CPUMCTX.r9]
458	mov r10, qword [xSI + CPUMCTX.r10]
459	mov r11, qword [xSI + CPUMCTX.r11]
460	mov r12, qword [xSI + CPUMCTX.r12]
461	mov r13, qword [xSI + CPUMCTX.r13]
462	mov r14, qword [xSI + CPUMCTX.r14]
463	mov r15, qword [xSI + CPUMCTX.r15]
464
465	; resume or start?
466	cmp xDI, 0 ; fResume
467	je .vmlauch64_lauch
468
469	;/* Restore edi & esi. */
470	mov rdi, qword [xSI + CPUMCTX.edi]
471	mov rsi, qword [xSI + CPUMCTX.esi]
472
473	vmresume
474	jmp .vmlaunch64_done; ;/* here if vmresume detected a failure. */
475
476	.vmlauch64_lauch:
477	;/* Restore rdi & rsi. */
478	mov rdi, qword [xSI + CPUMCTX.edi]
479	mov rsi, qword [xSI + CPUMCTX.esi]
480
481	vmlaunch
482	jmp .vmlaunch64_done; ;/* here if vmlaunch detected a failure. */
483
484	ALIGNCODE(16)
485	.vmlaunch64_done:
486	jc near .vmxstart64_invalid_vmxon_ptr
487	jz near .vmxstart64_start_failed
488
489	; Restore base and limit of the IDTR & GDTR
490	lidt [xSP]
491	add xSP, xS*2
492	lgdt [xSP]
493	add xSP, xS*2
494
495	push xDI
496	mov xDI, [xSP + xS * 3] ; pCtx (*3 to skip the saved LDTR + TR)
497
498	mov qword [xDI + CPUMCTX.eax], rax
499	mov qword [xDI + CPUMCTX.ebx], rbx
500	mov qword [xDI + CPUMCTX.ecx], rcx
501	mov qword [xDI + CPUMCTX.edx], rdx
502	mov qword [xDI + CPUMCTX.esi], rsi
503	mov qword [xDI + CPUMCTX.ebp], rbp
504	mov qword [xDI + CPUMCTX.r8], r8
505	mov qword [xDI + CPUMCTX.r9], r9
506	mov qword [xDI + CPUMCTX.r10], r10
507	mov qword [xDI + CPUMCTX.r11], r11
508	mov qword [xDI + CPUMCTX.r12], r12
509	mov qword [xDI + CPUMCTX.r13], r13
510	mov qword [xDI + CPUMCTX.r14], r14
511	mov qword [xDI + CPUMCTX.r15], r15
512
513	pop xAX ; the guest edi we pushed above
514	mov qword [xDI + CPUMCTX.edi], rax
515
516	%ifdef VBOX_WITH_DR6_EXPERIMENT
517	; Save DR6 - experiment, not safe!
518	mov xAX, dr6
519	mov [xDI + CPUMCTX.dr6], xAX
520	%endif
521
522	; Restore TSS selector; must mark it as not busy before using ltr (!)
523	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
524	; @todo get rid of sgdt
525	pop xBX ; saved TR
526	sub xSP, xS*2
527	sgdt [xSP]
528	mov xAX, xBX
529	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
530	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
531	and dword [xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
532	ltr bx
533	add xSP, xS*2
534
535	pop xAX ; saved LDTR
536	lldt ax
537
538	pop xSI ; pCtx (needed in rsi by the macros below)
539
540	; Restore the host LSTAR, CSTAR, SFMASK & KERNEL_GSBASE MSRs
541	;; @todo use the automatic load feature for MSRs
542	LOADHOSTMSREX MSR_K8_KERNEL_GS_BASE, CPUMCTX.msrKERNELGSBASE
543	LOADHOSTMSREX MSR_K8_SF_MASK, CPUMCTX.msrSFMASK
544	LOADHOSTMSREX MSR_K6_STAR, CPUMCTX.msrSTAR
545	%if 0 ; not supported on Intel CPUs
546	LOADHOSTMSREX MSR_K8_CSTAR, CPUMCTX.msrCSTAR
547	%endif
548	LOADHOSTMSREX MSR_K8_LSTAR, CPUMCTX.msrLSTAR
549
550	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
551	pop xDX ; saved pCache
552
553	mov ecx, [xDX + VMCSCACHE.Read.cValidEntries]
554	cmp ecx, 0 ; can't happen
555	je .no_cached_reads
556	jmp .cached_read
557
558	ALIGN(16)
559	.cached_read:
560	dec xCX
561	mov eax, [xDX + VMCSCACHE.Read.aField + xCX*4]
562	vmread [xDX + VMCSCACHE.Read.aFieldVal + xCX*8], xAX
563	cmp xCX, 0
564	jnz .cached_read
565	.no_cached_reads:
566
567	; Save CR2 for EPT
568	mov xAX, cr2
569	mov [xDX + VMCSCACHE.cr2], xAX
570	%endif
571
572	; Restore segment registers
573	MYPOPSEGS xAX, ax
574
575	; Restore general purpose registers
576	MYPOPAD
577
578	mov eax, VINF_SUCCESS
579
580	.vmstart64_end:
581	popf
582	pop xBP
583	ret
584
585
586	.vmxstart64_invalid_vmxon_ptr:
587	; Restore base and limit of the IDTR & GDTR
588	lidt [xSP]
589	add xSP, xS*2
590	lgdt [xSP]
591	add xSP, xS*2
592
593	; Restore TSS selector; must mark it as not busy before using ltr (!)
594	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
595	; @todo get rid of sgdt
596	pop xBX ; saved TR
597	sub xSP, xS*2
598	sgdt [xSP]
599	mov xAX, xBX
600	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
601	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
602	and dword [xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
603	ltr bx
604	add xSP, xS*2
605
606	pop xAX ; saved LDTR
607	lldt ax
608
609	pop xSI ; pCtx (needed in rsi by the macros below)
610
611	; Restore the host LSTAR, CSTAR, SFMASK & KERNEL_GSBASE MSRs
612	;; @todo use the automatic load feature for MSRs
613	LOADHOSTMSREX MSR_K8_KERNEL_GS_BASE, CPUMCTX.msrKERNELGSBASE
614	LOADHOSTMSR MSR_K8_SF_MASK
615	LOADHOSTMSR MSR_K6_STAR
616	%if 0 ; not supported on Intel CPUs
617	LOADHOSTMSR MSR_K8_CSTAR
618	%endif
619	LOADHOSTMSR MSR_K8_LSTAR
620
621	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
622	add xSP, xS ; pCache
623	%endif
624
625	; Restore segment registers
626	MYPOPSEGS xAX, ax
627
628	; Restore all general purpose host registers.
629	MYPOPAD
630	mov eax, VERR_VMX_INVALID_VMXON_PTR
631	jmp .vmstart64_end
632
633	.vmxstart64_start_failed:
634	; Restore base and limit of the IDTR & GDTR
635	lidt [xSP]
636	add xSP, xS*2
637	lgdt [xSP]
638	add xSP, xS*2
639
640	; Restore TSS selector; must mark it as not busy before using ltr (!)
641	; ASSUME that this is supposed to be 'BUSY'. (saves 20-30 ticks on the T42p)
642	; @todo get rid of sgdt
643	pop xBX ; saved TR
644	sub xSP, xS*2
645	sgdt [xSP]
646	mov xAX, xBX
647	and al, 0F8h ; mask away TI and RPL bits, get descriptor offset.
648	add xAX, [xSP + 2] ; eax <- GDTR.address + descriptor offset.
649	and dword [xAX + 4], ~0200h ; clear busy flag (2nd type2 bit)
650	ltr bx
651	add xSP, xS*2
652
653	pop xAX ; saved LDTR
654	lldt ax
655
656	pop xSI ; pCtx (needed in rsi by the macros below)
657
658	; Restore the host LSTAR, CSTAR, SFMASK & KERNEL_GSBASE MSRs
659	;; @todo use the automatic load feature for MSRs
660	LOADHOSTMSREX MSR_K8_KERNEL_GS_BASE, CPUMCTX.msrKERNELGSBASE
661	LOADHOSTMSR MSR_K8_SF_MASK
662	LOADHOSTMSR MSR_K6_STAR
663	%if 0 ; not supported on Intel CPUs
664	LOADHOSTMSR MSR_K8_CSTAR
665	%endif
666	LOADHOSTMSR MSR_K8_LSTAR
667
668	%ifdef VMX_USE_CACHED_VMCS_ACCESSES
669	add xSP, xS ; pCache
670	%endif
671
672	; Restore segment registers
673	MYPOPSEGS xAX, ax
674
675	; Restore all general purpose host registers.
676	MYPOPAD
677	mov eax, VERR_VMX_UNABLE_TO_START_VM
678	jmp .vmstart64_end
679	ENDPROC MY_NAME(VMXR0StartVM64)
680	%endif ; RT_ARCH_AMD64
681
682
683	;/**
684	; * Prepares for and executes VMRUN (32 bits guests)
685	; *
686	; * @returns VBox status code
687	; * @param HCPhysVMCB Physical address of host VMCB
688	; * @param HCPhysVMCB Physical address of guest VMCB
689	; * @param pCtx Guest context
690	; */
691	ALIGNCODE(16)
692	BEGINPROC MY_NAME(SVMR0VMRun)
693	%ifdef RT_ARCH_AMD64 ; fake a cdecl stack frame
694	%ifdef ASM_CALL64_GCC
695	push rdx
696	push rsi
697	push rdi
698	%else
699	push r8
700	push rdx
701	push rcx
702	%endif
703	push 0
704	%endif
705	push xBP
706	mov xBP, xSP
707	pushf
708
709	;/* Manual save and restore:
710	; * - General purpose registers except RIP, RSP, RAX
711	; *
712	; * Trashed:
713	; * - CR2 (we don't care)
714	; * - LDTR (reset to 0)
715	; * - DRx (presumably not changed at all)
716	; * - DR7 (reset to 0x400)
717	; */
718
719	;/* Save all general purpose host registers. */
720	MYPUSHAD
721
722	;/* Save the Guest CPU context pointer. */
723	mov xSI, [xBP + xS2 + RTHCPHYS_CB2] ; pCtx
724	push xSI ; push for saving the state at the end
725
726	; save host fs, gs, sysenter msr etc
727	mov xAX, [xBP + xS*2] ; pVMCBHostPhys (64 bits physical address; x86: take low dword only)
728	push xAX ; save for the vmload after vmrun
729	vmsave
730
731	; setup eax for VMLOAD
732	mov xAX, [xBP + xS*2 + RTHCPHYS_CB] ; pVMCBPhys (64 bits physical address; take low dword only)
733
734	;/* Restore Guest's general purpose registers. */
735	;/* EAX is loaded from the VMCB by VMRUN */
736	mov ebx, [xSI + CPUMCTX.ebx]
737	mov ecx, [xSI + CPUMCTX.ecx]
738	mov edx, [xSI + CPUMCTX.edx]
739	mov edi, [xSI + CPUMCTX.edi]
740	mov ebp, [xSI + CPUMCTX.ebp]
741	mov esi, [xSI + CPUMCTX.esi]
742
743	; Clear the global interrupt flag & execute sti to make sure external interrupts cause a world switch
744	clgi
745	sti
746
747	; load guest fs, gs, sysenter msr etc
748	vmload
749	; run the VM
750	vmrun
751
752	;/* EAX is in the VMCB already; we can use it here. */
753
754	; save guest fs, gs, sysenter msr etc
755	vmsave
756
757	; load host fs, gs, sysenter msr etc
758	pop xAX ; pushed above
759	vmload
760
761	; Set the global interrupt flag again, but execute cli to make sure IF=0.
762	cli
763	stgi
764
765	pop xAX ; pCtx
766
767	mov [ss:xAX + CPUMCTX.ebx], ebx
768	mov [ss:xAX + CPUMCTX.ecx], ecx
769	mov [ss:xAX + CPUMCTX.edx], edx
770	mov [ss:xAX + CPUMCTX.esi], esi
771	mov [ss:xAX + CPUMCTX.edi], edi
772	mov [ss:xAX + CPUMCTX.ebp], ebp
773
774	; Restore general purpose registers
775	MYPOPAD
776
777	mov eax, VINF_SUCCESS
778
779	popf
780	pop xBP
781	%ifdef RT_ARCH_AMD64
782	add xSP, 4*xS
783	%endif
784	ret
785	ENDPROC MY_NAME(SVMR0VMRun)
786
787	%ifdef RT_ARCH_AMD64
788	;/**
789	; * Prepares for and executes VMRUN (64 bits guests)
790	; *
791	; * @returns VBox status code
792	; * @param HCPhysVMCB Physical address of host VMCB
793	; * @param HCPhysVMCB Physical address of guest VMCB
794	; * @param pCtx Guest context
795	; */
796	ALIGNCODE(16)
797	BEGINPROC MY_NAME(SVMR0VMRun64)
798	; fake a cdecl stack frame
799	%ifdef ASM_CALL64_GCC
800	push rdx
801	push rsi
802	push rdi
803	%else
804	push r8
805	push rdx
806	push rcx
807	%endif
808	push 0
809	push rbp
810	mov rbp, rsp
811	pushf
812
813	;/* Manual save and restore:
814	; * - General purpose registers except RIP, RSP, RAX
815	; *
816	; * Trashed:
817	; * - CR2 (we don't care)
818	; * - LDTR (reset to 0)
819	; * - DRx (presumably not changed at all)
820	; * - DR7 (reset to 0x400)
821	; */
822
823	;/* Save all general purpose host registers. */
824	MYPUSHAD
825
826	;/* Save the Guest CPU context pointer. */
827	mov rsi, [rbp + xS2 + RTHCPHYS_CB2] ; pCtx
828	push rsi ; push for saving the state at the end
829
830	; save host fs, gs, sysenter msr etc
831	mov rax, [rbp + xS*2] ; pVMCBHostPhys (64 bits physical address; x86: take low dword only)
832	push rax ; save for the vmload after vmrun
833	vmsave
834
835	; setup eax for VMLOAD
836	mov rax, [rbp + xS*2 + RTHCPHYS_CB] ; pVMCBPhys (64 bits physical address; take low dword only)
837
838	;/* Restore Guest's general purpose registers. */
839	;/* RAX is loaded from the VMCB by VMRUN */
840	mov rbx, qword [xSI + CPUMCTX.ebx]
841	mov rcx, qword [xSI + CPUMCTX.ecx]
842	mov rdx, qword [xSI + CPUMCTX.edx]
843	mov rdi, qword [xSI + CPUMCTX.edi]
844	mov rbp, qword [xSI + CPUMCTX.ebp]
845	mov r8, qword [xSI + CPUMCTX.r8]
846	mov r9, qword [xSI + CPUMCTX.r9]
847	mov r10, qword [xSI + CPUMCTX.r10]
848	mov r11, qword [xSI + CPUMCTX.r11]
849	mov r12, qword [xSI + CPUMCTX.r12]
850	mov r13, qword [xSI + CPUMCTX.r13]
851	mov r14, qword [xSI + CPUMCTX.r14]
852	mov r15, qword [xSI + CPUMCTX.r15]
853	mov rsi, qword [xSI + CPUMCTX.esi]
854
855	; Clear the global interrupt flag & execute sti to make sure external interrupts cause a world switch
856	clgi
857	sti
858
859	; load guest fs, gs, sysenter msr etc
860	vmload
861	; run the VM
862	vmrun
863
864	;/* RAX is in the VMCB already; we can use it here. */
865
866	; save guest fs, gs, sysenter msr etc
867	vmsave
868
869	; load host fs, gs, sysenter msr etc
870	pop rax ; pushed above
871	vmload
872
873	; Set the global interrupt flag again, but execute cli to make sure IF=0.
874	cli
875	stgi
876
877	pop rax ; pCtx
878
879	mov qword [rax + CPUMCTX.ebx], rbx
880	mov qword [rax + CPUMCTX.ecx], rcx
881	mov qword [rax + CPUMCTX.edx], rdx
882	mov qword [rax + CPUMCTX.esi], rsi
883	mov qword [rax + CPUMCTX.edi], rdi
884	mov qword [rax + CPUMCTX.ebp], rbp
885	mov qword [rax + CPUMCTX.r8], r8
886	mov qword [rax + CPUMCTX.r9], r9
887	mov qword [rax + CPUMCTX.r10], r10
888	mov qword [rax + CPUMCTX.r11], r11
889	mov qword [rax + CPUMCTX.r12], r12
890	mov qword [rax + CPUMCTX.r13], r13
891	mov qword [rax + CPUMCTX.r14], r14
892	mov qword [rax + CPUMCTX.r15], r15
893
894	; Restore general purpose registers
895	MYPOPAD
896
897	mov eax, VINF_SUCCESS
898
899	popf
900	pop rbp
901	add rsp, 4*xS
902	ret
903	ENDPROC MY_NAME(SVMR0VMRun64)
904	%endif ; RT_ARCH_AMD64
905

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format