CPUMR0.cpp@ 46543

Last change on this file since 46543 was 45356, checked in by vboxsync, 12 years ago
tabs
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 30.6 KB

Line
1	/* $Id: CPUMR0.cpp 45356 2013-04-05 07:01:27Z vboxsync $ */
2	/** @file
3	* CPUM - Host Context Ring 0.
4	*/
5
6	/*
7	* Copyright (C) 2006-2013 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	/*******************************************************************************
20	* Header Files *
21	*******************************************************************************/
22	#define LOG_GROUP LOG_GROUP_CPUM
23	#include <VBox/vmm/cpum.h>
24	#include "CPUMInternal.h"
25	#include <VBox/vmm/vm.h>
26	#include <VBox/err.h>
27	#include <VBox/log.h>
28	#include <VBox/vmm/hm.h>
29	#include <iprt/assert.h>
30	#include <iprt/asm-amd64-x86.h>
31	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
32	# include <iprt/mem.h>
33	# include <iprt/memobj.h>
34	# include <VBox/apic.h>
35	#endif
36	#include <iprt/x86.h>
37
38
39	/*******************************************************************************
40	* Structures and Typedefs *
41	*******************************************************************************/
42	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
43	/**
44	* Local APIC mappings.
45	*/
46	typedef struct CPUMHOSTLAPIC
47	{
48	/** Indicates that the entry is in use and have valid data. */
49	bool fEnabled;
50	/** Has APIC_REG_LVT_THMR. Not used. */
51	uint32_t fHasThermal;
52	/** The physical address of the APIC registers. */
53	RTHCPHYS PhysBase;
54	/** The memory object entering the physical address. */
55	RTR0MEMOBJ hMemObj;
56	/** The mapping object for hMemObj. */
57	RTR0MEMOBJ hMapObj;
58	/** The mapping address APIC registers.
59	* @remarks Different CPUs may use the same physical address to map their
60	* APICs, so this pointer is only valid when on the CPU owning the
61	* APIC. */
62	void *pv;
63	} CPUMHOSTLAPIC;
64	#endif
65
66
67	/*******************************************************************************
68	* Global Variables *
69	*******************************************************************************/
70	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
71	static CPUMHOSTLAPIC g_aLApics[RTCPUSET_MAX_CPUS];
72	#endif
73
74
75	/*******************************************************************************
76	* Internal Functions *
77	*******************************************************************************/
78	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
79	static int cpumR0MapLocalApics(void);
80	static void cpumR0UnmapLocalApics(void);
81	#endif
82
83
84	/**
85	* Does the Ring-0 CPU initialization once during module load.
86	* XXX Host-CPU hot-plugging?
87	*/
88	VMMR0DECL(int) CPUMR0ModuleInit(void)
89	{
90	int rc = VINF_SUCCESS;
91	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
92	rc = cpumR0MapLocalApics();
93	#endif
94	return rc;
95	}
96
97
98	/**
99	* Terminate the module.
100	*/
101	VMMR0DECL(int) CPUMR0ModuleTerm(void)
102	{
103	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
104	cpumR0UnmapLocalApics();
105	#endif
106	return VINF_SUCCESS;
107	}
108
109
110	/**
111	* Check the CPUID features of this particular CPU and disable relevant features
112	* for the guest which do not exist on this CPU. We have seen systems where the
113	* X86_CPUID_FEATURE_ECX_MONITOR feature flag is only set on some host CPUs, see
114	* @{bugref 5436}.
115	*
116	* @note This function might be called simultaneously on more than one CPU!
117	*
118	* @param idCpu The identifier for the CPU the function is called on.
119	* @param pvUser1 Pointer to the VM structure.
120	* @param pvUser2 Ignored.
121	*/
122	static DECLCALLBACK(void) cpumR0CheckCpuid(RTCPUID idCpu, void pvUser1, void pvUser2)
123	{
124	struct
125	{
126	uint32_t uLeave; /* leave to check */
127	uint32_t ecx; /* which bits in ecx to unify between CPUs */
128	uint32_t edx; /* which bits in edx to unify between CPUs */
129	} aCpuidUnify[]
130	=
131	{
132	{ 0x00000001, X86_CPUID_FEATURE_ECX_CX16
133	\| X86_CPUID_FEATURE_ECX_MONITOR,
134	X86_CPUID_FEATURE_EDX_CX8 }
135	};
136	PVM pVM = (PVM)pvUser1;
137	PCPUM pCPUM = &pVM->cpum.s;
138	for (uint32_t i = 0; i < RT_ELEMENTS(aCpuidUnify); i++)
139	{
140	uint32_t uLeave = aCpuidUnify[i].uLeave;
141	uint32_t eax, ebx, ecx, edx;
142
143	ASMCpuId_Idx_ECX(uLeave, 0, &eax, &ebx, &ecx, &edx);
144	PCPUMCPUID paLeaves;
145	if (uLeave < 0x80000000)
146	paLeaves = &pCPUM->aGuestCpuIdStd[uLeave - 0x00000000];
147	else if (uLeave < 0xc0000000)
148	paLeaves = &pCPUM->aGuestCpuIdExt[uLeave - 0x80000000];
149	else
150	paLeaves = &pCPUM->aGuestCpuIdCentaur[uLeave - 0xc0000000];
151	/* unify important bits */
152	ASMAtomicAndU32(&paLeaves->ecx, ecx \| ~aCpuidUnify[i].ecx);
153	ASMAtomicAndU32(&paLeaves->edx, edx \| ~aCpuidUnify[i].edx);
154	}
155	}
156
157
158	/**
159	* Does Ring-0 CPUM initialization.
160	*
161	* This is mainly to check that the Host CPU mode is compatible
162	* with VBox.
163	*
164	* @returns VBox status code.
165	* @param pVM Pointer to the VM.
166	*/
167	VMMR0DECL(int) CPUMR0Init(PVM pVM)
168	{
169	LogFlow(("CPUMR0Init: %p\n", pVM));
170
171	/*
172	* Check CR0 & CR4 flags.
173	*/
174	uint32_t u32CR0 = ASMGetCR0();
175	if ((u32CR0 & (X86_CR0_PE \| X86_CR0_PG)) != (X86_CR0_PE \| X86_CR0_PG)) /* a bit paranoid perhaps.. */
176	{
177	Log(("CPUMR0Init: PE or PG not set. cr0=%#x\n", u32CR0));
178	return VERR_UNSUPPORTED_CPU_MODE;
179	}
180
181	/*
182	* Check for sysenter and syscall usage.
183	*/
184	if (ASMHasCpuId())
185	{
186	/*
187	* SYSENTER/SYSEXIT
188	*
189	* Intel docs claim you should test both the flag and family, model &
190	* stepping because some Pentium Pro CPUs have the SEP cpuid flag set,
191	* but don't support it. AMD CPUs may support this feature in legacy
192	* mode, they've banned it from long mode. Since we switch to 32-bit
193	* mode when entering raw-mode context the feature would become
194	* accessible again on AMD CPUs, so we have to check regardless of
195	* host bitness.
196	*/
197	uint32_t u32CpuVersion;
198	uint32_t u32Dummy;
199	uint32_t fFeatures;
200	ASMCpuId(1, &u32CpuVersion, &u32Dummy, &u32Dummy, &fFeatures);
201	uint32_t u32Family = u32CpuVersion >> 8;
202	uint32_t u32Model = (u32CpuVersion >> 4) & 0xF;
203	uint32_t u32Stepping = u32CpuVersion & 0xF;
204	if ( (fFeatures & X86_CPUID_FEATURE_EDX_SEP)
205	&& ( u32Family != 6 /* (> pentium pro) */
206	\|\| u32Model >= 3
207	\|\| u32Stepping >= 3
208	\|\| !ASMIsIntelCpu())
209	)
210	{
211	/*
212	* Read the MSR and see if it's in use or not.
213	*/
214	uint32_t u32 = ASMRdMsr_Low(MSR_IA32_SYSENTER_CS);
215	if (u32)
216	{
217	pVM->cpum.s.fHostUseFlags \|= CPUM_USE_SYSENTER;
218	Log(("CPUMR0Init: host uses sysenter cs=%08x%08x\n", ASMRdMsr_High(MSR_IA32_SYSENTER_CS), u32));
219	}
220	}
221
222	/*
223	* SYSCALL/SYSRET
224	*
225	* This feature is indicated by the SEP bit returned in EDX by CPUID
226	* function 0x80000001. Intel CPUs only supports this feature in
227	* long mode. Since we're not running 64-bit guests in raw-mode there
228	* are no issues with 32-bit intel hosts.
229	*/
230	uint32_t cExt = 0;
231	ASMCpuId(0x80000000, &cExt, &u32Dummy, &u32Dummy, &u32Dummy);
232	if ( cExt >= 0x80000001
233	&& cExt <= 0x8000ffff)
234	{
235	uint32_t fExtFeaturesEDX = ASMCpuId_EDX(0x80000001);
236	if (fExtFeaturesEDX & X86_CPUID_EXT_FEATURE_EDX_SYSCALL)
237	{
238	#ifdef RT_ARCH_X86
239	# ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
240	if (fExtFeaturesEDX & X86_CPUID_EXT_FEATURE_EDX_LONG_MODE)
241	# else
242	if (!ASMIsIntelCpu())
243	# endif
244	#endif
245	{
246	uint64_t fEfer = ASMRdMsr(MSR_K6_EFER);
247	if (fEfer & MSR_K6_EFER_SCE)
248	{
249	pVM->cpum.s.fHostUseFlags \|= CPUM_USE_SYSCALL;
250	Log(("CPUMR0Init: host uses syscall\n"));
251	}
252	}
253	}
254	}
255
256	RTMpOnAll(cpumR0CheckCpuid, pVM, NULL);
257	}
258
259
260	/*
261	* Check if debug registers are armed.
262	* This ASSUMES that DR7.GD is not set, or that it's handled transparently!
263	*/
264	uint32_t u32DR7 = ASMGetDR7();
265	if (u32DR7 & X86_DR7_ENABLED_MASK)
266	{
267	for (VMCPUID i = 0; i < pVM->cCpus; i++)
268	pVM->aCpus[i].cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS_HOST;
269	Log(("CPUMR0Init: host uses debug registers (dr7=%x)\n", u32DR7));
270	}
271
272	return VINF_SUCCESS;
273	}
274
275
276	/**
277	* Lazily sync in the FPU/XMM state
278	*
279	* @returns VBox status code.
280	* @param pVM Pointer to the VM.
281	* @param pVCpu Pointer to the VMCPU.
282	* @param pCtx Pointer to the guest CPU context.
283	*/
284	VMMR0DECL(int) CPUMR0LoadGuestFPU(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx)
285	{
286	Assert(pVM->cpum.s.CPUFeatures.edx.u1FXSR);
287	Assert(ASMGetCR4() & X86_CR4_OSFSXR);
288
289	/* If the FPU state has already been loaded, then it's a guest trap. */
290	if (pVCpu->cpum.s.fUseFlags & CPUM_USED_FPU)
291	{
292	Assert( ((pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS)) == (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS))
293	\|\| ((pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS)) == (X86_CR0_MP \| X86_CR0_TS)));
294	return VINF_EM_RAW_GUEST_TRAP;
295	}
296
297	/*
298	* There are two basic actions:
299	* 1. Save host fpu and restore guest fpu.
300	* 2. Generate guest trap.
301	*
302	* When entering the hypervisor we'll always enable MP (for proper wait
303	* trapping) and TS (for intercepting all fpu/mmx/sse stuff). The EM flag
304	* is taken from the guest OS in order to get proper SSE handling.
305	*
306	*
307	* Actions taken depending on the guest CR0 flags:
308	*
309	* 3 2 1
310	* TS \| EM \| MP \| FPUInstr \| WAIT :: VMM Action
311	* ------------------------------------------------------------------------
312	* 0 \| 0 \| 0 \| Exec \| Exec :: Clear TS & MP, Save HC, Load GC.
313	* 0 \| 0 \| 1 \| Exec \| Exec :: Clear TS, Save HC, Load GC.
314	* 0 \| 1 \| 0 \| #NM \| Exec :: Clear TS & MP, Save HC, Load GC.
315	* 0 \| 1 \| 1 \| #NM \| Exec :: Clear TS, Save HC, Load GC.
316	* 1 \| 0 \| 0 \| #NM \| Exec :: Clear MP, Save HC, Load GC. (EM is already cleared.)
317	* 1 \| 0 \| 1 \| #NM \| #NM :: Go to guest taking trap there.
318	* 1 \| 1 \| 0 \| #NM \| Exec :: Clear MP, Save HC, Load GC. (EM is already set.)
319	* 1 \| 1 \| 1 \| #NM \| #NM :: Go to guest taking trap there.
320	*/
321
322	switch (pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS))
323	{
324	case X86_CR0_MP \| X86_CR0_TS:
325	case X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS:
326	return VINF_EM_RAW_GUEST_TRAP;
327	default:
328	break;
329	}
330
331	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
332	if (CPUMIsGuestInLongModeEx(pCtx))
333	{
334	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_FPU_STATE));
335
336	/* Save the host state and record the fact (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM). */
337	cpumR0SaveHostFPUState(&pVCpu->cpum.s);
338
339	/* Restore the state on entry as we need to be in 64 bits mode to access the full state. */
340	pVCpu->cpum.s.fUseFlags \|= CPUM_SYNC_FPU_STATE;
341	}
342	else
343	#endif
344	{
345	#ifndef CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE
346	# if defined(VBOX_WITH_HYBRID_32BIT_KERNEL) \|\| defined(VBOX_WITH_KERNEL_USING_XMM) /** @todo remove the #else here and move cpumHandleLazyFPUAsm back to VMMGC after branching out 3.0!!. */
347	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE));
348	/** @todo Move the FFXR handling down into
349	* cpumR0SaveHostRestoreguestFPUState to optimize the
350	* VBOX_WITH_KERNEL_USING_XMM handling. */
351	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
352	uint64_t SavedEFER = 0;
353	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
354	{
355	SavedEFER = ASMRdMsr(MSR_K6_EFER);
356	if (SavedEFER & MSR_K6_EFER_FFXSR)
357	{
358	ASMWrMsr(MSR_K6_EFER, SavedEFER & ~MSR_K6_EFER_FFXSR);
359	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
360	}
361	}
362
363	/* Do the job and record that we've switched FPU state. */
364	cpumR0SaveHostRestoreGuestFPUState(&pVCpu->cpum.s);
365
366	/* Restore EFER. */
367	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
368	ASMWrMsr(MSR_K6_EFER, SavedEFER);
369
370	# else
371	uint64_t oldMsrEFERHost = 0;
372	uint32_t oldCR0 = ASMGetCR0();
373
374	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
375	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
376	{
377	/** @todo Do we really need to read this every time?? The host could change this on the fly though.
378	* bird: what about starting by skipping the ASMWrMsr below if we didn't
379	* change anything? Ditto for the stuff in CPUMR0SaveGuestFPU. */
380	oldMsrEFERHost = ASMRdMsr(MSR_K6_EFER);
381	if (oldMsrEFERHost & MSR_K6_EFER_FFXSR)
382	{
383	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost & ~MSR_K6_EFER_FFXSR);
384	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
385	}
386	}
387
388	/* If we sync the FPU/XMM state on-demand, then we can continue execution as if nothing has happened. */
389	int rc = CPUMHandleLazyFPU(pVCpu);
390	AssertRC(rc);
391	Assert(CPUMIsGuestFPUStateActive(pVCpu));
392
393	/* Restore EFER MSR */
394	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
395	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost);
396
397	/* CPUMHandleLazyFPU could have changed CR0; restore it. */
398	ASMSetCR0(oldCR0);
399	# endif
400
401	#else /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
402
403	/*
404	* Save the FPU control word and MXCSR, so we can restore the state properly afterwards.
405	* We don't want the guest to be able to trigger floating point/SSE exceptions on the host.
406	*/
407	pVCpu->cpum.s.Host.fpu.FCW = CPUMGetFCW();
408	if (pVM->cpum.s.CPUFeatures.edx.u1SSE)
409	pVCpu->cpum.s.Host.fpu.MXCSR = CPUMGetMXCSR();
410
411	cpumR0LoadFPU(pCtx);
412
413	/*
414	* The MSR_K6_EFER_FFXSR feature is AMD only so far, but check the cpuid just in case Intel adds it in the future.
415	*
416	* MSR_K6_EFER_FFXSR changes the behaviour of fxsave and fxrstore: the XMM state isn't saved/restored
417	*/
418	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
419	{
420	/** @todo Do we really need to read this every time?? The host could change this on the fly though. */
421	uint64_t msrEFERHost = ASMRdMsr(MSR_K6_EFER);
422
423	if (msrEFERHost & MSR_K6_EFER_FFXSR)
424	{
425	/* fxrstor doesn't restore the XMM state! */
426	cpumR0LoadXMM(pCtx);
427	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
428	}
429	}
430
431	#endif /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
432	}
433
434	Assert((pVCpu->cpum.s.fUseFlags & (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM)) == (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM));
435	return VINF_SUCCESS;
436	}
437
438
439	/**
440	* Save guest FPU/XMM state
441	*
442	* @returns VBox status code.
443	* @param pVM Pointer to the VM.
444	* @param pVCpu Pointer to the VMCPU.
445	* @param pCtx Pointer to the guest CPU context.
446	*/
447	VMMR0DECL(int) CPUMR0SaveGuestFPU(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx)
448	{
449	Assert(pVM->cpum.s.CPUFeatures.edx.u1FXSR);
450	Assert(ASMGetCR4() & X86_CR4_OSFSXR);
451	AssertReturn((pVCpu->cpum.s.fUseFlags & CPUM_USED_FPU), VINF_SUCCESS);
452	NOREF(pCtx);
453
454	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
455	if (CPUMIsGuestInLongModeEx(pCtx))
456	{
457	if (!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_FPU_STATE))
458	{
459	HMR0SaveFPUState(pVM, pVCpu, pCtx);
460	cpumR0RestoreHostFPUState(&pVCpu->cpum.s);
461	}
462	/* else nothing to do; we didn't perform a world switch */
463	}
464	else
465	#endif
466	{
467	#ifndef CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE
468	# ifdef VBOX_WITH_KERNEL_USING_XMM
469	/*
470	* We've already saved the XMM registers in the assembly wrapper, so
471	* we have to save them before saving the entire FPU state and put them
472	* back afterwards.
473	*/
474	/** @todo This could be skipped if MSR_K6_EFER_FFXSR is set, but
475	* I'm not able to test such an optimization tonight.
476	* We could just all this in assembly. */
477	uint128_t aGuestXmmRegs[16];
478	memcpy(&aGuestXmmRegs[0], &pVCpu->cpum.s.Guest.fpu.aXMM[0], sizeof(aGuestXmmRegs));
479	# endif
480
481	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
482	uint64_t oldMsrEFERHost = 0;
483	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
484	{
485	oldMsrEFERHost = ASMRdMsr(MSR_K6_EFER);
486	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost & ~MSR_K6_EFER_FFXSR);
487	}
488	cpumR0SaveGuestRestoreHostFPUState(&pVCpu->cpum.s);
489
490	/* Restore EFER MSR */
491	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
492	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost \| MSR_K6_EFER_FFXSR);
493
494	# ifdef VBOX_WITH_KERNEL_USING_XMM
495	memcpy(&pVCpu->cpum.s.Guest.fpu.aXMM[0], &aGuestXmmRegs[0], sizeof(aGuestXmmRegs));
496	# endif
497
498	#else /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
499	# ifdef VBOX_WITH_KERNEL_USING_XMM
500	# error "Fix all the NM_TRAPS_IN_KERNEL_MODE code path. I'm not going to fix unused code now."
501	# endif
502	cpumR0SaveFPU(pCtx);
503	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
504	{
505	/* fxsave doesn't save the XMM state! */
506	cpumR0SaveXMM(pCtx);
507	}
508
509	/*
510	* Restore the original FPU control word and MXCSR.
511	* We don't want the guest to be able to trigger floating point/SSE exceptions on the host.
512	*/
513	cpumR0SetFCW(pVCpu->cpum.s.Host.fpu.FCW);
514	if (pVM->cpum.s.CPUFeatures.edx.u1SSE)
515	cpumR0SetMXCSR(pVCpu->cpum.s.Host.fpu.MXCSR);
516	#endif /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
517	}
518
519	pVCpu->cpum.s.fUseFlags &= ~(CPUM_USED_FPU \| CPUM_SYNC_FPU_STATE \| CPUM_MANUAL_XMM_RESTORE);
520	return VINF_SUCCESS;
521	}
522
523
524	/**
525	* Save guest debug state
526	*
527	* @returns VBox status code.
528	* @param pVM Pointer to the VM.
529	* @param pVCpu Pointer to the VMCPU.
530	* @param pCtx Pointer to the guest CPU context.
531	* @param fDR6 Whether to include DR6 or not.
532	*/
533	VMMR0DECL(int) CPUMR0SaveGuestDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
534	{
535	Assert(pVCpu->cpum.s.fUseFlags & CPUM_USE_DEBUG_REGS);
536
537	/* Save the guest's debug state. The caller is responsible for DR7. */
538	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
539	if (CPUMIsGuestInLongModeEx(pCtx))
540	{
541	if (!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_DEBUG_STATE))
542	{
543	uint64_t dr6 = pCtx->dr[6];
544
545	HMR0SaveDebugState(pVM, pVCpu, pCtx);
546	if (!fDR6) /* dr6 was already up-to-date */
547	pCtx->dr[6] = dr6;
548	}
549	}
550	else
551	#endif
552	{
553	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
554	cpumR0SaveDRx(&pCtx->dr[0]);
555	#else
556	pCtx->dr[0] = ASMGetDR0();
557	pCtx->dr[1] = ASMGetDR1();
558	pCtx->dr[2] = ASMGetDR2();
559	pCtx->dr[3] = ASMGetDR3();
560	#endif
561	if (fDR6)
562	pCtx->dr[6] = ASMGetDR6();
563	}
564
565	/*
566	* Restore the host's debug state. DR0-3, DR6 and only then DR7!
567	* DR7 contains 0x400 right now.
568	*/
569	CPUMR0LoadHostDebugState(pVM, pVCpu);
570	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_USE_DEBUG_REGS));
571	return VINF_SUCCESS;
572	}
573
574
575	/**
576	* Lazily sync in the debug state
577	*
578	* @returns VBox status code.
579	* @param pVM Pointer to the VM.
580	* @param pVCpu Pointer to the VMCPU.
581	* @param pCtx Pointer to the guest CPU context.
582	* @param fDR6 Whether to include DR6 or not.
583	*/
584	VMMR0DECL(int) CPUMR0LoadGuestDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
585	{
586	/* Save the host state. */
587	CPUMR0SaveHostDebugState(pVM, pVCpu);
588	Assert(ASMGetDR7() == X86_DR7_INIT_VAL);
589
590	/* Activate the guest state DR0-3; DR7 is left to the caller. */
591	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
592	if (CPUMIsGuestInLongModeEx(pCtx))
593	{
594	/* Restore the state on entry as we need to be in 64 bits mode to access the full state. */
595	pVCpu->cpum.s.fUseFlags \|= CPUM_SYNC_DEBUG_STATE;
596	}
597	else
598	#endif
599	{
600	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
601	cpumR0LoadDRx(&pCtx->dr[0]);
602	#else
603	ASMSetDR0(pCtx->dr[0]);
604	ASMSetDR1(pCtx->dr[1]);
605	ASMSetDR2(pCtx->dr[2]);
606	ASMSetDR3(pCtx->dr[3]);
607	#endif
608	if (fDR6)
609	ASMSetDR6(pCtx->dr[6]);
610	}
611
612	pVCpu->cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS;
613	return VINF_SUCCESS;
614	}
615
616	/**
617	* Save the host debug state
618	*
619	* @returns VBox status code.
620	* @param pVM Pointer to the VM.
621	* @param pVCpu Pointer to the VMCPU.
622	*/
623	VMMR0DECL(int) CPUMR0SaveHostDebugState(PVM pVM, PVMCPU pVCpu)
624	{
625	NOREF(pVM);
626
627	/* Save the host state. */
628	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
629	AssertCompile((uintptr_t)&pVCpu->cpum.s.Host.dr3 - (uintptr_t)&pVCpu->cpum.s.Host.dr0 == sizeof(uint64_t) * 3);
630	cpumR0SaveDRx(&pVCpu->cpum.s.Host.dr0);
631	#else
632	pVCpu->cpum.s.Host.dr0 = ASMGetDR0();
633	pVCpu->cpum.s.Host.dr1 = ASMGetDR1();
634	pVCpu->cpum.s.Host.dr2 = ASMGetDR2();
635	pVCpu->cpum.s.Host.dr3 = ASMGetDR3();
636	#endif
637	pVCpu->cpum.s.Host.dr6 = ASMGetDR6();
638	/** @todo dr7 might already have been changed to 0x400; don't care right now as it's harmless. */
639	pVCpu->cpum.s.Host.dr7 = ASMGetDR7();
640	/* Make sure DR7 is harmless or else we could trigger breakpoints when restoring dr0-3 (!) */
641	ASMSetDR7(X86_DR7_INIT_VAL);
642
643	return VINF_SUCCESS;
644	}
645
646	/**
647	* Load the host debug state
648	*
649	* @returns VBox status code.
650	* @param pVM Pointer to the VM.
651	* @param pVCpu Pointer to the VMCPU.
652	*/
653	VMMR0DECL(int) CPUMR0LoadHostDebugState(PVM pVM, PVMCPU pVCpu)
654	{
655	Assert(pVCpu->cpum.s.fUseFlags & (CPUM_USE_DEBUG_REGS \| CPUM_USE_DEBUG_REGS_HYPER));
656	NOREF(pVM);
657
658	/*
659	* Restore the host's debug state. DR0-3, DR6 and only then DR7!
660	* DR7 contains 0x400 right now.
661	*/
662	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
663	AssertCompile((uintptr_t)&pVCpu->cpum.s.Host.dr3 - (uintptr_t)&pVCpu->cpum.s.Host.dr0 == sizeof(uint64_t) * 3);
664	cpumR0LoadDRx(&pVCpu->cpum.s.Host.dr0);
665	#else
666	ASMSetDR0(pVCpu->cpum.s.Host.dr0);
667	ASMSetDR1(pVCpu->cpum.s.Host.dr1);
668	ASMSetDR2(pVCpu->cpum.s.Host.dr2);
669	ASMSetDR3(pVCpu->cpum.s.Host.dr3);
670	#endif
671	ASMSetDR6(pVCpu->cpum.s.Host.dr6);
672	ASMSetDR7(pVCpu->cpum.s.Host.dr7);
673
674	pVCpu->cpum.s.fUseFlags &= ~(CPUM_USE_DEBUG_REGS \| CPUM_USE_DEBUG_REGS_HYPER);
675	return VINF_SUCCESS;
676	}
677
678
679	/**
680	* Lazily sync in the hypervisor debug state
681	*
682	* @returns VBox status code.
683	* @param pVM Pointer to the VM.
684	* @param pVCpu Pointer to the VMCPU.
685	* @param pCtx Pointer to the guest CPU context.
686	* @param fDR6 Whether to include DR6 or not.
687	*/
688	VMMR0DECL(int) CPUMR0LoadHyperDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
689	{
690	NOREF(pCtx);
691
692	/* Save the host state. */
693	CPUMR0SaveHostDebugState(pVM, pVCpu);
694	Assert(ASMGetDR7() == X86_DR7_INIT_VAL);
695
696	/* Activate the guest state DR0-3; DR7 is left to the caller. */
697	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
698	if (CPUMIsGuestInLongModeEx(pCtx))
699	{
700	AssertFailed();
701	return VERR_NOT_IMPLEMENTED;
702	}
703	else
704	#endif
705	{
706	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
707	AssertFailed();
708	return VERR_NOT_IMPLEMENTED;
709	#else
710	ASMSetDR0(CPUMGetHyperDR0(pVCpu));
711	ASMSetDR1(CPUMGetHyperDR1(pVCpu));
712	ASMSetDR2(CPUMGetHyperDR2(pVCpu));
713	ASMSetDR3(CPUMGetHyperDR3(pVCpu));
714	#endif
715	if (fDR6)
716	ASMSetDR6(CPUMGetHyperDR6(pVCpu));
717	}
718
719	pVCpu->cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS_HYPER;
720	return VINF_SUCCESS;
721	}
722
723	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
724
725	/**
726	* Worker for cpumR0MapLocalApics. Check each CPU for a present Local APIC.
727	* Play safe and treat each CPU separate.
728	*
729	* @param idCpu The identifier for the CPU the function is called on.
730	* @param pvUser1 Ignored.
731	* @param pvUser2 Ignored.
732	*/
733	static DECLCALLBACK(void) cpumR0MapLocalApicWorker(RTCPUID idCpu, void pvUser1, void pvUser2)
734	{
735	NOREF(pvUser1); NOREF(pvUser2);
736	int iCpu = RTMpCpuIdToSetIndex(idCpu);
737	AssertReturnVoid(iCpu >= 0 && (unsigned)iCpu < RT_ELEMENTS(g_aLApics));
738
739	uint32_t uMaxLeaf, u32EBX, u32ECX, u32EDX;
740	ASMCpuId(0, &uMaxLeaf, &u32EBX, &u32ECX, &u32EDX);
741	if ( ( ASMIsIntelCpuEx(u32EBX, u32ECX, u32EDX)
742	\|\| ASMIsAmdCpuEx(u32EBX, u32ECX, u32EDX)
743	\|\| ASMIsViaCentaurCpuEx(u32EBX, u32ECX, u32EDX))
744	&& ASMIsValidStdRange(uMaxLeaf))
745	{
746	uint32_t uDummy;
747	ASMCpuId(1, &uDummy, &u32EBX, &u32ECX, &u32EDX);
748	if ( (u32EDX & X86_CPUID_FEATURE_EDX_APIC)
749	&& (u32EDX & X86_CPUID_FEATURE_EDX_MSR))
750	{
751	uint64_t u64ApicBase = ASMRdMsr(MSR_IA32_APICBASE);
752	uint64_t u64Mask = UINT64_C(0x0000000ffffff000);
753
754	/* see Intel Manual: Local APIC Status and Location: MAXPHYADDR default is bit 36 */
755	uint32_t uMaxExtLeaf;
756	ASMCpuId(0x80000000, &uMaxExtLeaf, &u32EBX, &u32ECX, &u32EDX);
757	if ( uMaxExtLeaf >= UINT32_C(0x80000008)
758	&& ASMIsValidExtRange(uMaxExtLeaf))
759	{
760	uint32_t u32PhysBits;
761	ASMCpuId(0x80000008, &u32PhysBits, &u32EBX, &u32ECX, &u32EDX);
762	u32PhysBits &= 0xff;
763	u64Mask = ((UINT64_C(1) << u32PhysBits) - 1) & UINT64_C(0xfffffffffffff000);
764	}
765
766	uint64_t const u64PhysBase = u64ApicBase & u64Mask;
767	g_aLApics[iCpu].PhysBase = (RTHCPHYS)u64PhysBase;
768	g_aLApics[iCpu].fEnabled = g_aLApics[iCpu].PhysBase == u64PhysBase;
769	}
770	}
771	}
772
773
774	/**
775	* Map the MMIO page of each local APIC in the system.
776	*/
777	static int cpumR0MapLocalApics(void)
778	{
779	/*
780	* Check that we'll always stay within the array bounds.
781	*/
782	if (RTMpGetArraySize() > RT_ELEMENTS(g_aLApics))
783	{
784	LogRel(("CPUM: Too many real CPUs/cores/threads - %u, max %u\n", RTMpGetArraySize(), RT_ELEMENTS(g_aLApics)));
785	return VERR_TOO_MANY_CPUS;
786	}
787
788	/*
789	* Create mappings for all online CPUs we think have APICs.
790	*/
791	/** @todo r=bird: This code is not adequately handling CPUs that are
792	* offline or unplugged at init time and later bought into action. */
793	int rc = RTMpOnAll(cpumR0MapLocalApicWorker, NULL, NULL);
794
795	for (unsigned iCpu = 0; RT_SUCCESS(rc) && iCpu < RT_ELEMENTS(g_aLApics); iCpu++)
796	{
797	if (g_aLApics[iCpu].fEnabled)
798	{
799	rc = RTR0MemObjEnterPhys(&g_aLApics[iCpu].hMemObj, g_aLApics[iCpu].PhysBase,
800	PAGE_SIZE, RTMEM_CACHE_POLICY_MMIO);
801	if (RT_SUCCESS(rc))
802	{
803	rc = RTR0MemObjMapKernel(&g_aLApics[iCpu].hMapObj, g_aLApics[iCpu].hMemObj, (void *)-1,
804	PAGE_SIZE, RTMEM_PROT_READ \| RTMEM_PROT_WRITE);
805	if (RT_SUCCESS(rc))
806	{
807	void *pvApicBase = RTR0MemObjAddress(g_aLApics[iCpu].hMapObj);
808
809	/*
810	* 0x0X 82489 external APIC
811	* 0x1X Local APIC
812	* 0x2X..0xFF reserved
813	*/
814	/** @todo r=bird: The local APIC is usually at the same address for all CPUs,
815	* and therefore inaccessible by the other CPUs. */
816	uint32_t ApicVersion = ApicRegRead(pvApicBase, APIC_REG_VERSION);
817	if ((APIC_REG_VERSION_GET_VER(ApicVersion) & 0xF0) == 0x10)
818	{
819	g_aLApics[iCpu].fHasThermal = APIC_REG_VERSION_GET_MAX_LVT(ApicVersion) >= 5;
820	g_aLApics[iCpu].pv = pvApicBase;
821	Log(("CPUM: APIC %02u at %RGp (mapped at %p) - ver %#x, lint0=%#x lint1=%#x pc=%#x thmr=%#x\n",
822	iCpu, g_aLApics[iCpu].PhysBase, g_aLApics[iCpu].pv, ApicVersion,
823	ApicRegRead(pvApicBase, APIC_REG_LVT_LINT0),
824	ApicRegRead(pvApicBase, APIC_REG_LVT_LINT1),
825	ApicRegRead(pvApicBase, APIC_REG_LVT_PC),
826	ApicRegRead(pvApicBase, APIC_REG_LVT_THMR)
827	));
828	continue;
829	}
830
831	RTR0MemObjFree(g_aLApics[iCpu].hMapObj, true /* fFreeMappings */);
832	}
833	RTR0MemObjFree(g_aLApics[iCpu].hMemObj, true /* fFreeMappings */);
834	}
835	g_aLApics[iCpu].fEnabled = false;
836	}
837	}
838	if (RT_FAILURE(rc))
839	{
840	cpumR0UnmapLocalApics();
841	return rc;
842	}
843
844	return VINF_SUCCESS;
845	}
846
847
848	/**
849	* Unmap the Local APIC of all host CPUs.
850	*/
851	static void cpumR0UnmapLocalApics(void)
852	{
853	for (unsigned iCpu = RT_ELEMENTS(g_aLApics); iCpu-- > 0;)
854	{
855	if (g_aLApics[iCpu].pv)
856	{
857	RTR0MemObjFree(g_aLApics[iCpu].hMapObj, true /* fFreeMappings */);
858	RTR0MemObjFree(g_aLApics[iCpu].hMemObj, true /* fFreeMappings */);
859	g_aLApics[iCpu].hMapObj = NIL_RTR0MEMOBJ;
860	g_aLApics[iCpu].hMemObj = NIL_RTR0MEMOBJ;
861	g_aLApics[iCpu].fEnabled = false;
862	g_aLApics[iCpu].pv = NULL;
863	}
864	}
865	}
866
867
868	/**
869	* Write the Local APIC mapping address of the current host CPU to CPUM to be
870	* able to access the APIC registers in the raw mode switcher for disabling/
871	* re-enabling the NMI. Must be called with disabled preemption or disabled
872	* interrupts!
873	*
874	* @param pVM Pointer to the VM.
875	* @param idHostCpu The ID of the current host CPU.
876	*/
877	VMMR0DECL(void) CPUMR0SetLApic(PVM pVM, RTCPUID idHostCpu)
878	{
879	pVM->cpum.s.pvApicBase = g_aLApics[RTMpCpuIdToSetIndex(idHostCpu)].pv;
880	}
881
882	#endif /* VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI */
883

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/VMM/VMMR0/CPUMR0.cpp@ 46543

Download in other formats: