/* $Id: SELM.cpp 28800 2010-04-27 08:22:32Z vboxsync $ */ /** @file * SELM - The Selector Manager. */ /* * Copyright (C) 2006-2007 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_selm SELM - The Selector Manager * * SELM takes care of GDT, LDT and TSS shadowing in raw-mode, and the injection * of a few hyper selector for the raw-mode context. In the hardware assisted * virtualization mode its only task is to decode entries in the guest GDT or * LDT once in a while. * * @see grp_selm * * * @section seg_selm_shadowing Shadowing * * SELMR3UpdateFromCPUM() and SELMR3SyncTSS() does the bulk synchronization * work. The three structures (GDT, LDT, TSS) are all shadowed wholesale atm. * The idea is to do it in a more on-demand fashion when we get time. There * also a whole bunch of issues with the current synchronization of all three * tables, see notes and todos in the code. * * When the guest makes changes to the GDT we will try update the shadow copy * without involving SELMR3UpdateFromCPUM(), see selmGCSyncGDTEntry(). * * When the guest make LDT changes we'll trigger a full resync of the LDT * (SELMR3UpdateFromCPUM()), which, needless to say, isn't optimal. * * The TSS shadowing is limited to the fields we need to care about, namely SS0 * and ESP0. The Patch Manager makes use of these. We monitor updates to the * guest TSS and will try keep our SS0 and ESP0 copies up to date this way * rather than go the SELMR3SyncTSS() route. * * When in raw-mode SELM also injects a few extra GDT selectors which are used * by the raw-mode (hyper) context. These start their life at the high end of * the table and will be relocated when the guest tries to make use of them... * Well, that was that idea at least, only the code isn't quite there yet which * is why we have trouble with guests which actually have a full sized GDT. * * So, the summary of the current GDT, LDT and TSS shadowing is that there is a * lot of relatively simple and enjoyable work to be done, see @bugref{3267}. * */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_SELM #include #include #include #include #include #include #include #include #include "SELMInternal.h" #include #include #include #include #include #include #include #include #include /** * Enable or disable tracking of Guest's GDT/LDT/TSS. * @{ */ #define SELM_TRACK_GUEST_GDT_CHANGES #define SELM_TRACK_GUEST_LDT_CHANGES #define SELM_TRACK_GUEST_TSS_CHANGES /** @} */ /** * Enable or disable tracking of Shadow GDT/LDT/TSS. * @{ */ #define SELM_TRACK_SHADOW_GDT_CHANGES #define SELM_TRACK_SHADOW_LDT_CHANGES #define SELM_TRACK_SHADOW_TSS_CHANGES /** @} */ /** SELM saved state version. */ #define SELM_SAVED_STATE_VERSION 5 /******************************************************************************* * Internal Functions * *******************************************************************************/ static DECLCALLBACK(int) selmR3Save(PVM pVM, PSSMHANDLE pSSM); static DECLCALLBACK(int) selmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass); static DECLCALLBACK(int) selmR3LoadDone(PVM pVM, PSSMHANDLE pSSM); static DECLCALLBACK(int) selmR3GuestGDTWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPhys, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser); static DECLCALLBACK(int) selmR3GuestLDTWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPhys, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser); static DECLCALLBACK(int) selmR3GuestTSSWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPhys, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser); static DECLCALLBACK(void) selmR3InfoGdt(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); static DECLCALLBACK(void) selmR3InfoGdtGuest(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); static DECLCALLBACK(void) selmR3InfoLdt(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); static DECLCALLBACK(void) selmR3InfoLdtGuest(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); //static DECLCALLBACK(void) selmR3InfoTss(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); //static DECLCALLBACK(void) selmR3InfoTssGuest(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); /** * Initializes the SELM. * * @returns VBox status code. * @param pVM The VM to operate on. */ VMMR3DECL(int) SELMR3Init(PVM pVM) { LogFlow(("SELMR3Init\n")); /* * Assert alignment and sizes. * (The TSS block requires contiguous back.) */ AssertCompile(sizeof(pVM->selm.s) <= sizeof(pVM->selm.padding)); AssertRelease(sizeof(pVM->selm.s) <= sizeof(pVM->selm.padding)); AssertCompileMemberAlignment(VM, selm.s, 32); AssertRelease(!(RT_OFFSETOF(VM, selm.s) & 31)); #if 0 /* doesn't work */ AssertCompile((RT_OFFSETOF(VM, selm.s.Tss) & PAGE_OFFSET_MASK) <= PAGE_SIZE - sizeof(pVM->selm.s.Tss)); AssertCompile((RT_OFFSETOF(VM, selm.s.TssTrap08) & PAGE_OFFSET_MASK) <= PAGE_SIZE - sizeof(pVM->selm.s.TssTrap08)); #endif AssertRelease((RT_OFFSETOF(VM, selm.s.Tss) & PAGE_OFFSET_MASK) <= PAGE_SIZE - sizeof(pVM->selm.s.Tss)); AssertRelease((RT_OFFSETOF(VM, selm.s.TssTrap08) & PAGE_OFFSET_MASK) <= PAGE_SIZE - sizeof(pVM->selm.s.TssTrap08)); AssertRelease(sizeof(pVM->selm.s.Tss.IntRedirBitmap) == 0x20); /* * Init the structure. */ pVM->selm.s.offVM = RT_OFFSETOF(VM, selm); pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] = (SELM_GDT_ELEMENTS - 0x1) << 3; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] = (SELM_GDT_ELEMENTS - 0x2) << 3; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] = (SELM_GDT_ELEMENTS - 0x3) << 3; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] = (SELM_GDT_ELEMENTS - 0x4) << 3; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] = (SELM_GDT_ELEMENTS - 0x5) << 3; /* * Allocate GDT table. */ int rc = MMR3HyperAllocOnceNoRel(pVM, sizeof(pVM->selm.s.paGdtR3[0]) * SELM_GDT_ELEMENTS, PAGE_SIZE, MM_TAG_SELM, (void **)&pVM->selm.s.paGdtR3); AssertRCReturn(rc, rc); /* * Allocate LDT area. */ rc = MMR3HyperAllocOnceNoRel(pVM, _64K + PAGE_SIZE, PAGE_SIZE, MM_TAG_SELM, &pVM->selm.s.pvLdtR3); AssertRCReturn(rc, rc); /* * Init Guest's and Shadow GDT, LDT, TSS changes control variables. */ pVM->selm.s.cbEffGuestGdtLimit = 0; pVM->selm.s.GuestGdtr.pGdt = RTRCPTR_MAX; pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; pVM->selm.s.GCPtrGuestTss = RTRCPTR_MAX; pVM->selm.s.paGdtRC = NIL_RTRCPTR; /* Must be set in SELMR3Relocate because of monitoring. */ pVM->selm.s.pvLdtRC = RTRCPTR_MAX; pVM->selm.s.pvMonShwTssRC = RTRCPTR_MAX; pVM->selm.s.GCSelTss = RTSEL_MAX; pVM->selm.s.fDisableMonitoring = false; pVM->selm.s.fSyncTSSRing0Stack = false; /* The I/O bitmap starts right after the virtual interrupt redirection bitmap. Outside the TSS on purpose; the CPU will not check it * for I/O operations. */ pVM->selm.s.Tss.offIoBitmap = sizeof(VBOXTSS); /* bit set to 1 means no redirection */ memset(pVM->selm.s.Tss.IntRedirBitmap, 0xff, sizeof(pVM->selm.s.Tss.IntRedirBitmap)); /* * Register the saved state data unit. */ rc = SSMR3RegisterInternal(pVM, "selm", 1, SELM_SAVED_STATE_VERSION, sizeof(SELM), NULL, NULL, NULL, NULL, selmR3Save, NULL, NULL, selmR3Load, selmR3LoadDone); if (RT_FAILURE(rc)) return rc; /* * Statistics. */ STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestGDTHandled, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/GDTInt", STAMUNIT_OCCURENCES, "The number of handled writes to the Guest GDT."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestGDTUnhandled, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/GDTEmu", STAMUNIT_OCCURENCES, "The number of unhandled writes to the Guest GDT."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestLDT, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/LDT", STAMUNIT_OCCURENCES, "The number of writes to the Guest LDT was detected."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestTSSHandled, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/TSSInt", STAMUNIT_OCCURENCES, "The number of handled writes to the Guest TSS."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestTSSRedir, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/TSSRedir",STAMUNIT_OCCURENCES, "The number of handled redir bitmap writes to the Guest TSS."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestTSSHandledChanged,STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/TSSIntChg", STAMUNIT_OCCURENCES, "The number of handled writes to the Guest TSS where the R0 stack changed."); STAM_REG(pVM, &pVM->selm.s.StatRCWriteGuestTSSUnhandled, STAMTYPE_COUNTER, "/SELM/GC/Write/Guest/TSSEmu", STAMUNIT_OCCURENCES, "The number of unhandled writes to the Guest TSS."); STAM_REG(pVM, &pVM->selm.s.StatTSSSync, STAMTYPE_PROFILE, "/PROF/SELM/TSSSync", STAMUNIT_TICKS_PER_CALL, "Profiling of the SELMR3SyncTSS() body."); STAM_REG(pVM, &pVM->selm.s.StatUpdateFromCPUM, STAMTYPE_PROFILE, "/PROF/SELM/UpdateFromCPUM", STAMUNIT_TICKS_PER_CALL, "Profiling of the SELMR3UpdateFromCPUM() body."); STAM_REG(pVM, &pVM->selm.s.StatHyperSelsChanged, STAMTYPE_COUNTER, "/SELM/HyperSels/Changed", STAMUNIT_OCCURENCES, "The number of times we had to relocate our hypervisor selectors."); STAM_REG(pVM, &pVM->selm.s.StatScanForHyperSels, STAMTYPE_COUNTER, "/SELM/HyperSels/Scan", STAMUNIT_OCCURENCES, "The number of times we had find free hypervisor selectors."); /* * Default action when entering raw mode for the first time */ PVMCPU pVCpu = &pVM->aCpus[0]; /* raw mode implies on VCPU */ VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_TSS); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_LDT); /* * Register info handlers. */ DBGFR3InfoRegisterInternal(pVM, "gdt", "Displays the shadow GDT. No arguments.", &selmR3InfoGdt); DBGFR3InfoRegisterInternal(pVM, "gdtguest", "Displays the guest GDT. No arguments.", &selmR3InfoGdtGuest); DBGFR3InfoRegisterInternal(pVM, "ldt", "Displays the shadow LDT. No arguments.", &selmR3InfoLdt); DBGFR3InfoRegisterInternal(pVM, "ldtguest", "Displays the guest LDT. No arguments.", &selmR3InfoLdtGuest); //DBGFR3InfoRegisterInternal(pVM, "tss", "Displays the shadow TSS. No arguments.", &selmR3InfoTss); //DBGFR3InfoRegisterInternal(pVM, "tssguest", "Displays the guest TSS. No arguments.", &selmR3InfoTssGuest); return rc; } /** * Finalizes HMA page attributes. * * @returns VBox status code. * @param pVM The VM handle. */ VMMR3DECL(int) SELMR3InitFinalize(PVM pVM) { /** @cfgm{/DoubleFault,bool,false} * Enables catching of double faults in the raw-mode context VMM code. This can * be used when the tripple faults or hangs occure and one suspect an unhandled * double fault. This is not enabled by default because it means making the * hyper selectors writeable for all supervisor code, including the guest's. * The double fault is a task switch and thus requires write access to the GDT * of the TSS (to set it busy), to the old TSS (to store state), and to the Trap * 8 TSS for the back link. */ bool f; #if defined(DEBUG_bird) int rc = CFGMR3QueryBoolDef(CFGMR3GetRoot(pVM), "DoubleFault", &f, true); #else int rc = CFGMR3QueryBoolDef(CFGMR3GetRoot(pVM), "DoubleFault", &f, false); #endif AssertLogRelRCReturn(rc, rc); if (f) { PX86DESC paGdt = pVM->selm.s.paGdtR3; rc = PGMMapSetPage(pVM, MMHyperR3ToRC(pVM, &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] >> 3]), sizeof(paGdt[0]), X86_PTE_RW | X86_PTE_P | X86_PTE_A | X86_PTE_D); AssertRC(rc); rc = PGMMapSetPage(pVM, MMHyperR3ToRC(pVM, &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] >> 3]), sizeof(paGdt[0]), X86_PTE_RW | X86_PTE_P | X86_PTE_A | X86_PTE_D); AssertRC(rc); rc = PGMMapSetPage(pVM, VM_RC_ADDR(pVM, &pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS]), sizeof(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS]), X86_PTE_RW | X86_PTE_P | X86_PTE_A | X86_PTE_D); AssertRC(rc); rc = PGMMapSetPage(pVM, VM_RC_ADDR(pVM, &pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08]), sizeof(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08]), X86_PTE_RW | X86_PTE_P | X86_PTE_A | X86_PTE_D); AssertRC(rc); } return VINF_SUCCESS; } /** * Setup the hypervisor GDT selectors in our shadow table * * @param pVM The VM handle. */ static void selmR3SetupHyperGDTSelectors(PVM pVM) { PX86DESC paGdt = pVM->selm.s.paGdtR3; /* * Set up global code and data descriptors for use in the guest context. * Both are wide open (base 0, limit 4GB) */ PX86DESC pDesc = &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] >> 3]; pDesc->Gen.u16LimitLow = 0xffff; pDesc->Gen.u4LimitHigh = 0xf; pDesc->Gen.u16BaseLow = 0; pDesc->Gen.u8BaseHigh1 = 0; pDesc->Gen.u8BaseHigh2 = 0; pDesc->Gen.u4Type = X86_SEL_TYPE_ER_ACC; pDesc->Gen.u1DescType = 1; /* not system, but code/data */ pDesc->Gen.u2Dpl = 0; /* supervisor */ pDesc->Gen.u1Present = 1; pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 0; pDesc->Gen.u1DefBig = 1; /* def 32 bit */ pDesc->Gen.u1Granularity = 1; /* 4KB limit */ /* data */ pDesc = &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] >> 3]; pDesc->Gen.u16LimitLow = 0xffff; pDesc->Gen.u4LimitHigh = 0xf; pDesc->Gen.u16BaseLow = 0; pDesc->Gen.u8BaseHigh1 = 0; pDesc->Gen.u8BaseHigh2 = 0; pDesc->Gen.u4Type = X86_SEL_TYPE_RW_ACC; pDesc->Gen.u1DescType = 1; /* not system, but code/data */ pDesc->Gen.u2Dpl = 0; /* supervisor */ pDesc->Gen.u1Present = 1; pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 0; pDesc->Gen.u1DefBig = 1; /* big */ pDesc->Gen.u1Granularity = 1; /* 4KB limit */ /* 64-bit mode code (& data?) */ pDesc = &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] >> 3]; pDesc->Gen.u16LimitLow = 0xffff; pDesc->Gen.u4LimitHigh = 0xf; pDesc->Gen.u16BaseLow = 0; pDesc->Gen.u8BaseHigh1 = 0; pDesc->Gen.u8BaseHigh2 = 0; pDesc->Gen.u4Type = X86_SEL_TYPE_ER_ACC; pDesc->Gen.u1DescType = 1; /* not system, but code/data */ pDesc->Gen.u2Dpl = 0; /* supervisor */ pDesc->Gen.u1Present = 1; pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 1; /* The Long (L) attribute bit. */ pDesc->Gen.u1DefBig = 0; /* With L=1 this must be 0. */ pDesc->Gen.u1Granularity = 1; /* 4KB limit */ /* * TSS descriptor */ pDesc = &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] >> 3]; RTRCPTR RCPtrTSS = VM_RC_ADDR(pVM, &pVM->selm.s.Tss); pDesc->Gen.u16BaseLow = RT_LOWORD(RCPtrTSS); pDesc->Gen.u8BaseHigh1 = RT_BYTE3(RCPtrTSS); pDesc->Gen.u8BaseHigh2 = RT_BYTE4(RCPtrTSS); pDesc->Gen.u16LimitLow = sizeof(VBOXTSS) - 1; pDesc->Gen.u4LimitHigh = 0; pDesc->Gen.u4Type = X86_SEL_TYPE_SYS_386_TSS_AVAIL; pDesc->Gen.u1DescType = 0; /* system */ pDesc->Gen.u2Dpl = 0; /* supervisor */ pDesc->Gen.u1Present = 1; pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 0; pDesc->Gen.u1DefBig = 0; pDesc->Gen.u1Granularity = 0; /* byte limit */ /* * TSS descriptor for trap 08 */ pDesc = &paGdt[pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] >> 3]; pDesc->Gen.u16LimitLow = sizeof(VBOXTSS) - 1; pDesc->Gen.u4LimitHigh = 0; RCPtrTSS = VM_RC_ADDR(pVM, &pVM->selm.s.TssTrap08); pDesc->Gen.u16BaseLow = RT_LOWORD(RCPtrTSS); pDesc->Gen.u8BaseHigh1 = RT_BYTE3(RCPtrTSS); pDesc->Gen.u8BaseHigh2 = RT_BYTE4(RCPtrTSS); pDesc->Gen.u4Type = X86_SEL_TYPE_SYS_386_TSS_AVAIL; pDesc->Gen.u1DescType = 0; /* system */ pDesc->Gen.u2Dpl = 0; /* supervisor */ pDesc->Gen.u1Present = 1; pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 0; pDesc->Gen.u1DefBig = 0; pDesc->Gen.u1Granularity = 0; /* byte limit */ } /** * Applies relocations to data and code managed by this * component. This function will be called at init and * whenever the VMM need to relocate it self inside the GC. * * @param pVM The VM. */ VMMR3DECL(void) SELMR3Relocate(PVM pVM) { PX86DESC paGdt = pVM->selm.s.paGdtR3; LogFlow(("SELMR3Relocate\n")); for (VMCPUID i = 0; i < pVM->cCpus; i++) { PVMCPU pVCpu = &pVM->aCpus[i]; /* * Update GDTR and selector. */ CPUMSetHyperGDTR(pVCpu, MMHyperR3ToRC(pVM, paGdt), SELM_GDT_ELEMENTS * sizeof(paGdt[0]) - 1); /** @todo selector relocations should be a seperate operation? */ CPUMSetHyperCS(pVCpu, pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS]); CPUMSetHyperDS(pVCpu, pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]); CPUMSetHyperES(pVCpu, pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]); CPUMSetHyperSS(pVCpu, pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]); CPUMSetHyperTR(pVCpu, pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS]); } selmR3SetupHyperGDTSelectors(pVM); /** @todo SELM must be called when any of the CR3s changes during a cpu mode change. */ /** @todo PGM knows the proper CR3 values these days, not CPUM. */ /* * Update the TSSes. */ /* Only applies to raw mode which supports only 1 VCPU */ PVMCPU pVCpu = &pVM->aCpus[0]; /* Current TSS */ pVM->selm.s.Tss.cr3 = PGMGetHyperCR3(pVCpu); pVM->selm.s.Tss.ss0 = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.Tss.esp0 = VMMGetStackRC(pVM); pVM->selm.s.Tss.cs = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS]; pVM->selm.s.Tss.ds = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.Tss.es = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.Tss.offIoBitmap = sizeof(VBOXTSS); /* trap 08 */ pVM->selm.s.TssTrap08.cr3 = PGMGetInterRCCR3(pVM, pVCpu); /* this should give use better survival chances. */ pVM->selm.s.TssTrap08.ss0 = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.TssTrap08.ss = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.TssTrap08.esp0 = VMMGetStackRC(pVM) - PAGE_SIZE / 2; /* upper half can be analysed this way. */ pVM->selm.s.TssTrap08.esp = pVM->selm.s.TssTrap08.esp0; pVM->selm.s.TssTrap08.ebp = pVM->selm.s.TssTrap08.esp0; pVM->selm.s.TssTrap08.cs = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS]; pVM->selm.s.TssTrap08.ds = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.TssTrap08.es = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.TssTrap08.fs = 0; pVM->selm.s.TssTrap08.gs = 0; pVM->selm.s.TssTrap08.selLdt = 0; pVM->selm.s.TssTrap08.eflags = 0x2; /* all cleared */ pVM->selm.s.TssTrap08.ecx = VM_RC_ADDR(pVM, &pVM->selm.s.Tss); /* setup ecx to normal Hypervisor TSS address. */ pVM->selm.s.TssTrap08.edi = pVM->selm.s.TssTrap08.ecx; pVM->selm.s.TssTrap08.eax = pVM->selm.s.TssTrap08.ecx; pVM->selm.s.TssTrap08.edx = VM_RC_ADDR(pVM, pVM); /* setup edx VM address. */ pVM->selm.s.TssTrap08.edi = pVM->selm.s.TssTrap08.edx; pVM->selm.s.TssTrap08.ebx = pVM->selm.s.TssTrap08.edx; pVM->selm.s.TssTrap08.offIoBitmap = sizeof(VBOXTSS); /* TRPM will be updating the eip */ if (!pVM->selm.s.fDisableMonitoring) { /* * Update shadow GDT/LDT/TSS write access handlers. */ int rc; #ifdef SELM_TRACK_SHADOW_GDT_CHANGES if (pVM->selm.s.paGdtRC != NIL_RTRCPTR) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.paGdtRC); AssertRC(rc); } pVM->selm.s.paGdtRC = MMHyperR3ToRC(pVM, paGdt); rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_HYPERVISOR, pVM->selm.s.paGdtRC, pVM->selm.s.paGdtRC + SELM_GDT_ELEMENTS * sizeof(paGdt[0]) - 1, 0, 0, "selmRCShadowGDTWriteHandler", 0, "Shadow GDT write access handler"); AssertRC(rc); #endif #ifdef SELM_TRACK_SHADOW_TSS_CHANGES if (pVM->selm.s.pvMonShwTssRC != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.pvMonShwTssRC); AssertRC(rc); } pVM->selm.s.pvMonShwTssRC = VM_RC_ADDR(pVM, &pVM->selm.s.Tss); rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_HYPERVISOR, pVM->selm.s.pvMonShwTssRC, pVM->selm.s.pvMonShwTssRC + sizeof(pVM->selm.s.Tss) - 1, 0, 0, "selmRCShadowTSSWriteHandler", 0, "Shadow TSS write access handler"); AssertRC(rc); #endif /* * Update the GC LDT region handler and address. */ #ifdef SELM_TRACK_SHADOW_LDT_CHANGES if (pVM->selm.s.pvLdtRC != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.pvLdtRC); AssertRC(rc); } #endif pVM->selm.s.pvLdtRC = MMHyperR3ToRC(pVM, pVM->selm.s.pvLdtR3); #ifdef SELM_TRACK_SHADOW_LDT_CHANGES rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_HYPERVISOR, pVM->selm.s.pvLdtRC, pVM->selm.s.pvLdtRC + _64K + PAGE_SIZE - 1, 0, 0, "selmRCShadowLDTWriteHandler", 0, "Shadow LDT write access handler"); AssertRC(rc); #endif } } /** * Terminates the SELM. * * Termination means cleaning up and freeing all resources, * the VM it self is at this point powered off or suspended. * * @returns VBox status code. * @param pVM The VM to operate on. */ VMMR3DECL(int) SELMR3Term(PVM pVM) { return 0; } /** * The VM is being reset. * * For the SELM component this means that any GDT/LDT/TSS monitors * needs to be removed. * * @param pVM VM handle. */ VMMR3DECL(void) SELMR3Reset(PVM pVM) { LogFlow(("SELMR3Reset:\n")); VM_ASSERT_EMT(pVM); /* * Uninstall guest GDT/LDT/TSS write access handlers. */ int rc; #ifdef SELM_TRACK_GUEST_GDT_CHANGES if (pVM->selm.s.GuestGdtr.pGdt != RTRCPTR_MAX && pVM->selm.s.fGDTRangeRegistered) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GuestGdtr.pGdt); AssertRC(rc); pVM->selm.s.GuestGdtr.pGdt = RTRCPTR_MAX; pVM->selm.s.GuestGdtr.cbGdt = 0; } pVM->selm.s.fGDTRangeRegistered = false; #endif #ifdef SELM_TRACK_GUEST_LDT_CHANGES if (pVM->selm.s.GCPtrGuestLdt != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestLdt); AssertRC(rc); pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; } #endif #ifdef SELM_TRACK_GUEST_TSS_CHANGES if (pVM->selm.s.GCPtrGuestTss != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestTss); AssertRC(rc); pVM->selm.s.GCPtrGuestTss = RTRCPTR_MAX; pVM->selm.s.GCSelTss = RTSEL_MAX; } #endif /* * Re-initialize other members. */ pVM->selm.s.cbLdtLimit = 0; pVM->selm.s.offLdtHyper = 0; pVM->selm.s.cbMonitoredGuestTss = 0; pVM->selm.s.fSyncTSSRing0Stack = false; /* * Default action when entering raw mode for the first time */ PVMCPU pVCpu = &pVM->aCpus[0]; /* raw mode implies on VCPU */ VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_TSS); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_LDT); } /** * Disable GDT/LDT/TSS monitoring and syncing * * @param pVM The VM to operate on. */ VMMR3DECL(void) SELMR3DisableMonitoring(PVM pVM) { /* * Uninstall guest GDT/LDT/TSS write access handlers. */ int rc; #ifdef SELM_TRACK_GUEST_GDT_CHANGES if (pVM->selm.s.GuestGdtr.pGdt != RTRCPTR_MAX && pVM->selm.s.fGDTRangeRegistered) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GuestGdtr.pGdt); AssertRC(rc); pVM->selm.s.GuestGdtr.pGdt = RTRCPTR_MAX; pVM->selm.s.GuestGdtr.cbGdt = 0; } pVM->selm.s.fGDTRangeRegistered = false; #endif #ifdef SELM_TRACK_GUEST_LDT_CHANGES if (pVM->selm.s.GCPtrGuestLdt != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestLdt); AssertRC(rc); pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; } #endif #ifdef SELM_TRACK_GUEST_TSS_CHANGES if (pVM->selm.s.GCPtrGuestTss != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestTss); AssertRC(rc); pVM->selm.s.GCPtrGuestTss = RTRCPTR_MAX; pVM->selm.s.GCSelTss = RTSEL_MAX; } #endif /* * Unregister shadow GDT/LDT/TSS write access handlers. */ #ifdef SELM_TRACK_SHADOW_GDT_CHANGES if (pVM->selm.s.paGdtRC != NIL_RTRCPTR) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.paGdtRC); AssertRC(rc); pVM->selm.s.paGdtRC = NIL_RTRCPTR; } #endif #ifdef SELM_TRACK_SHADOW_TSS_CHANGES if (pVM->selm.s.pvMonShwTssRC != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.pvMonShwTssRC); AssertRC(rc); pVM->selm.s.pvMonShwTssRC = RTRCPTR_MAX; } #endif #ifdef SELM_TRACK_SHADOW_LDT_CHANGES if (pVM->selm.s.pvLdtRC != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.pvLdtRC); AssertRC(rc); pVM->selm.s.pvLdtRC = RTRCPTR_MAX; } #endif PVMCPU pVCpu = &pVM->aCpus[0]; /* raw mode implies on VCPU */ VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_TSS); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_LDT); pVM->selm.s.fDisableMonitoring = true; } /** * Execute state save operation. * * @returns VBox status code. * @param pVM VM Handle. * @param pSSM SSM operation handle. */ static DECLCALLBACK(int) selmR3Save(PVM pVM, PSSMHANDLE pSSM) { LogFlow(("selmR3Save:\n")); /* * Save the basic bits - fortunately all the other things can be resynced on load. */ PSELM pSelm = &pVM->selm.s; SSMR3PutBool(pSSM, pSelm->fDisableMonitoring); SSMR3PutBool(pSSM, pSelm->fSyncTSSRing0Stack); SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_CS]); SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_DS]); SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_CS64]); SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_CS64]); /* reserved for DS64. */ SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_TSS]); return SSMR3PutSel(pSSM, pSelm->aHyperSel[SELM_HYPER_SEL_TSS_TRAP08]); } /** * Execute state load operation. * * @returns VBox status code. * @param pVM VM Handle. * @param pSSM SSM operation handle. * @param uVersion Data layout version. * @param uPass The data pass. */ static DECLCALLBACK(int) selmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { LogFlow(("selmR3Load:\n")); Assert(uPass == SSM_PASS_FINAL); NOREF(uPass); /* * Validate version. */ if (uVersion != SELM_SAVED_STATE_VERSION) { AssertMsgFailed(("selmR3Load: Invalid version uVersion=%d!\n", uVersion)); return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; } /* * Do a reset. */ SELMR3Reset(pVM); /* Get the monitoring flag. */ SSMR3GetBool(pSSM, &pVM->selm.s.fDisableMonitoring); /* Get the TSS state flag. */ SSMR3GetBool(pSSM, &pVM->selm.s.fSyncTSSRing0Stack); /* * Get the selectors. */ RTSEL SelCS; SSMR3GetSel(pSSM, &SelCS); RTSEL SelDS; SSMR3GetSel(pSSM, &SelDS); RTSEL SelCS64; SSMR3GetSel(pSSM, &SelCS64); RTSEL SelDS64; SSMR3GetSel(pSSM, &SelDS64); RTSEL SelTSS; SSMR3GetSel(pSSM, &SelTSS); RTSEL SelTSSTrap08; SSMR3GetSel(pSSM, &SelTSSTrap08); /* Copy the selectors; they will be checked during relocation. */ PSELM pSelm = &pVM->selm.s; pSelm->aHyperSel[SELM_HYPER_SEL_CS] = SelCS; pSelm->aHyperSel[SELM_HYPER_SEL_DS] = SelDS; pSelm->aHyperSel[SELM_HYPER_SEL_CS64] = SelCS64; pSelm->aHyperSel[SELM_HYPER_SEL_TSS] = SelTSS; pSelm->aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] = SelTSSTrap08; return VINF_SUCCESS; } /** * Sync the GDT, LDT and TSS after loading the state. * * Just to play save, we set the FFs to force syncing before * executing GC code. * * @returns VBox status code. * @param pVM VM Handle. * @param pSSM SSM operation handle. */ static DECLCALLBACK(int) selmR3LoadDone(PVM pVM, PSSMHANDLE pSSM) { PVMCPU pVCpu = VMMGetCpu(pVM); LogFlow(("selmR3LoadDone:\n")); /* * Don't do anything if it's a load failure. */ int rc = SSMR3HandleGetStatus(pSSM); if (RT_FAILURE(rc)) return VINF_SUCCESS; /* * Do the syncing if we're in protected mode. */ if (PGMGetGuestMode(pVCpu) != PGMMODE_REAL) { VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_LDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_TSS); SELMR3UpdateFromCPUM(pVM, pVCpu); } /* * Flag everything for resync on next raw mode entry. */ VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_LDT); VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_TSS); return VINF_SUCCESS; } /** * Updates the Guest GDT & LDT virtualization based on current CPU state. * * @returns VBox status code. * @param pVM The VM to operate on. * @param pVCpu The VMCPU to operate on. */ VMMR3DECL(int) SELMR3UpdateFromCPUM(PVM pVM, PVMCPU pVCpu) { int rc = VINF_SUCCESS; if (pVM->selm.s.fDisableMonitoring) { VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_GDT); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_LDT); VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_TSS); return VINF_SUCCESS; } STAM_PROFILE_START(&pVM->selm.s.StatUpdateFromCPUM, a); /* * GDT sync */ if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_SELM_SYNC_GDT)) { /* * Always assume the best */ VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_GDT); /* If the GDT was changed, then make sure the LDT is checked too */ /** @todo only do this if the actual ldtr selector was changed; this is a bit excessive */ VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_LDT); /* Same goes for the TSS selector */ VMCPU_FF_SET(pVCpu, VMCPU_FF_SELM_SYNC_TSS); /* * Get the GDTR and check if there is anything to do (there usually is). */ VBOXGDTR GDTR; CPUMGetGuestGDTR(pVCpu, &GDTR); if (GDTR.cbGdt < sizeof(X86DESC)) { Log(("No GDT entries...\n")); STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VINF_SUCCESS; } /* * Read the Guest GDT. * ASSUMES that the entire GDT is in memory. */ RTUINT cbEffLimit = GDTR.cbGdt; PX86DESC pGDTE = &pVM->selm.s.paGdtR3[1]; rc = PGMPhysSimpleReadGCPtr(pVCpu, pGDTE, GDTR.pGdt + sizeof(X86DESC), cbEffLimit + 1 - sizeof(X86DESC)); if (RT_FAILURE(rc)) { /* * Read it page by page. * * Keep track of the last valid page and delay memsets and * adjust cbEffLimit to reflect the effective size. The latter * is something we do in the belief that the guest will probably * never actually commit the last page, thus allowing us to keep * our selectors in the high end of the GDT. */ RTUINT cbLeft = cbEffLimit + 1 - sizeof(X86DESC); RTGCPTR GCPtrSrc = (RTGCPTR)GDTR.pGdt + sizeof(X86DESC); uint8_t *pu8Dst = (uint8_t *)&pVM->selm.s.paGdtR3[1]; uint8_t *pu8DstInvalid = pu8Dst; while (cbLeft) { RTUINT cb = PAGE_SIZE - (GCPtrSrc & PAGE_OFFSET_MASK); cb = RT_MIN(cb, cbLeft); rc = PGMPhysSimpleReadGCPtr(pVCpu, pu8Dst, GCPtrSrc, cb); if (RT_SUCCESS(rc)) { if (pu8DstInvalid != pu8Dst) memset(pu8DstInvalid, 0, pu8Dst - pu8DstInvalid); GCPtrSrc += cb; pu8Dst += cb; pu8DstInvalid = pu8Dst; } else if ( rc == VERR_PAGE_NOT_PRESENT || rc == VERR_PAGE_TABLE_NOT_PRESENT) { GCPtrSrc += cb; pu8Dst += cb; } else { AssertReleaseMsgFailed(("Couldn't read GDT at %016RX64, rc=%Rrc!\n", GDTR.pGdt, rc)); STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VERR_NOT_IMPLEMENTED; } cbLeft -= cb; } /* any invalid pages at the end? */ if (pu8DstInvalid != pu8Dst) { cbEffLimit = pu8DstInvalid - (uint8_t *)pVM->selm.s.paGdtR3 - 1; /* If any GDTEs was invalidated, zero them. */ if (cbEffLimit < pVM->selm.s.cbEffGuestGdtLimit) memset(pu8DstInvalid + cbEffLimit + 1, 0, pVM->selm.s.cbEffGuestGdtLimit - cbEffLimit); } /* keep track of the effective limit. */ if (cbEffLimit != pVM->selm.s.cbEffGuestGdtLimit) { Log(("SELMR3UpdateFromCPUM: cbEffGuestGdtLimit=%#x -> %#x (actual %#x)\n", pVM->selm.s.cbEffGuestGdtLimit, cbEffLimit, GDTR.cbGdt)); pVM->selm.s.cbEffGuestGdtLimit = cbEffLimit; } } /* * Check if the Guest GDT intrudes on our GDT entries. */ /** @todo we should try to minimize relocations by making sure our current selectors can be reused. */ RTSEL aHyperSel[SELM_HYPER_SEL_MAX]; if (cbEffLimit >= SELM_HYPER_DEFAULT_BASE) { PX86DESC pGDTEStart = pVM->selm.s.paGdtR3; PX86DESC pGDTECur = (PX86DESC)((char *)pGDTEStart + GDTR.cbGdt + 1 - sizeof(X86DESC)); int iGDT = 0; Log(("Internal SELM GDT conflict: use non-present entries\n")); STAM_COUNTER_INC(&pVM->selm.s.StatScanForHyperSels); while (pGDTECur > pGDTEStart) { /* We can reuse non-present entries */ if (!pGDTECur->Gen.u1Present) { aHyperSel[iGDT] = ((uintptr_t)pGDTECur - (uintptr_t)pVM->selm.s.paGdtR3) / sizeof(X86DESC); aHyperSel[iGDT] = aHyperSel[iGDT] << X86_SEL_SHIFT; Log(("SELM: Found unused GDT %04X\n", aHyperSel[iGDT])); iGDT++; if (iGDT >= SELM_HYPER_SEL_MAX) break; } pGDTECur--; } if (iGDT != SELM_HYPER_SEL_MAX) { AssertReleaseMsgFailed(("Internal SELM GDT conflict.\n")); STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VERR_NOT_IMPLEMENTED; } } else { aHyperSel[SELM_HYPER_SEL_CS] = SELM_HYPER_DEFAULT_SEL_CS; aHyperSel[SELM_HYPER_SEL_DS] = SELM_HYPER_DEFAULT_SEL_DS; aHyperSel[SELM_HYPER_SEL_CS64] = SELM_HYPER_DEFAULT_SEL_CS64; aHyperSel[SELM_HYPER_SEL_TSS] = SELM_HYPER_DEFAULT_SEL_TSS; aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] = SELM_HYPER_DEFAULT_SEL_TSS_TRAP08; } /* * Work thru the copied GDT entries adjusting them for correct virtualization. */ PX86DESC pGDTEEnd = (PX86DESC)((char *)pGDTE + cbEffLimit + 1 - sizeof(X86DESC)); while (pGDTE < pGDTEEnd) { if (pGDTE->Gen.u1Present) { /* * Code and data selectors are generally 1:1, with the * 'little' adjustment we do for DPL 0 selectors. */ if (pGDTE->Gen.u1DescType) { /* * Hack for A-bit against Trap E on read-only GDT. */ /** @todo Fix this by loading ds and cs before turning off WP. */ pGDTE->Gen.u4Type |= X86_SEL_TYPE_ACCESSED; /* * All DPL 0 code and data segments are squeezed into DPL 1. * * We're skipping conforming segments here because those * cannot give us any trouble. */ if ( pGDTE->Gen.u2Dpl == 0 && (pGDTE->Gen.u4Type & (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF)) != (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF) ) pGDTE->Gen.u2Dpl = 1; } else { /* * System type selectors are marked not present. * Recompiler or special handling is required for these. */ /** @todo what about interrupt gates and rawr0? */ pGDTE->Gen.u1Present = 0; } } /* Next GDT entry. */ pGDTE++; } /* * Check if our hypervisor selectors were changed. */ if ( aHyperSel[SELM_HYPER_SEL_CS] != pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] || aHyperSel[SELM_HYPER_SEL_DS] != pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] || aHyperSel[SELM_HYPER_SEL_CS64] != pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] || aHyperSel[SELM_HYPER_SEL_TSS] != pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] || aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] != pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08]) { /* Reinitialize our hypervisor GDTs */ pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] = aHyperSel[SELM_HYPER_SEL_CS]; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] = aHyperSel[SELM_HYPER_SEL_DS]; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] = aHyperSel[SELM_HYPER_SEL_CS64]; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] = aHyperSel[SELM_HYPER_SEL_TSS]; pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] = aHyperSel[SELM_HYPER_SEL_TSS_TRAP08]; STAM_COUNTER_INC(&pVM->selm.s.StatHyperSelsChanged); /* * Do the relocation callbacks to let everyone update their hyper selector dependencies. * (SELMR3Relocate will call selmR3SetupHyperGDTSelectors() for us.) */ VMR3Relocate(pVM, 0); } else if (cbEffLimit >= SELM_HYPER_DEFAULT_BASE) /* We overwrote all entries above, so we have to save them again. */ selmR3SetupHyperGDTSelectors(pVM); /* * Adjust the cached GDT limit. * Any GDT entries which have been removed must be cleared. */ if (pVM->selm.s.GuestGdtr.cbGdt != GDTR.cbGdt) { if (pVM->selm.s.GuestGdtr.cbGdt > GDTR.cbGdt) memset(pGDTE, 0, pVM->selm.s.GuestGdtr.cbGdt - GDTR.cbGdt); #ifndef SELM_TRACK_GUEST_GDT_CHANGES pVM->selm.s.GuestGdtr.cbGdt = GDTR.cbGdt; #endif } #ifdef SELM_TRACK_GUEST_GDT_CHANGES /* * Check if Guest's GDTR is changed. */ if ( GDTR.pGdt != pVM->selm.s.GuestGdtr.pGdt || GDTR.cbGdt != pVM->selm.s.GuestGdtr.cbGdt) { Log(("SELMR3UpdateFromCPUM: Guest's GDT is changed to pGdt=%016RX64 cbGdt=%08X\n", GDTR.pGdt, GDTR.cbGdt)); /* * [Re]Register write virtual handler for guest's GDT. */ if (pVM->selm.s.GuestGdtr.pGdt != RTRCPTR_MAX && pVM->selm.s.fGDTRangeRegistered) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GuestGdtr.pGdt); AssertRC(rc); } rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_WRITE, GDTR.pGdt, GDTR.pGdt + GDTR.cbGdt /* already inclusive */, 0, selmR3GuestGDTWriteHandler, "selmRCGuestGDTWriteHandler", 0, "Guest GDT write access handler"); if (RT_FAILURE(rc)) return rc; /* Update saved Guest GDTR. */ pVM->selm.s.GuestGdtr = GDTR; pVM->selm.s.fGDTRangeRegistered = true; } #endif } /* * TSS sync */ if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_SELM_SYNC_TSS)) { SELMR3SyncTSS(pVM, pVCpu); } /* * LDT sync */ if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_SELM_SYNC_LDT)) { /* * Always assume the best */ VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_LDT); /* * LDT handling is done similarly to the GDT handling with a shadow * array. However, since the LDT is expected to be swappable (at least * some ancient OSes makes it swappable) it must be floating and * synced on a per-page basis. * * Eventually we will change this to be fully on demand. Meaning that * we will only sync pages containing LDT selectors actually used and * let the #PF handler lazily sync pages as they are used. * (This applies to GDT too, when we start making OS/2 fast.) */ /* * First, determin the current LDT selector. */ RTSEL SelLdt = CPUMGetGuestLDTR(pVCpu); if ((SelLdt & X86_SEL_MASK) == 0) { /* ldtr = 0 - update hyper LDTR and deregister any active handler. */ CPUMSetHyperLDTR(pVCpu, 0); #ifdef SELM_TRACK_GUEST_LDT_CHANGES if (pVM->selm.s.GCPtrGuestLdt != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestLdt); AssertRC(rc); pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; } #endif STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VINF_SUCCESS; } /* * Get the LDT selector. */ PX86DESC pDesc = &pVM->selm.s.paGdtR3[SelLdt >> X86_SEL_SHIFT]; RTGCPTR GCPtrLdt = X86DESC_BASE(*pDesc); unsigned cbLdt = X86DESC_LIMIT(*pDesc); if (pDesc->Gen.u1Granularity) cbLdt = (cbLdt << PAGE_SHIFT) | PAGE_OFFSET_MASK; /* * Validate it. */ if ( !cbLdt || SelLdt >= pVM->selm.s.GuestGdtr.cbGdt || pDesc->Gen.u1DescType || pDesc->Gen.u4Type != X86_SEL_TYPE_SYS_LDT) { AssertMsg(!cbLdt, ("Invalid LDT %04x!\n", SelLdt)); /* cbLdt > 0: * This is quite impossible, so we do as most people do when faced with * the impossible, we simply ignore it. */ CPUMSetHyperLDTR(pVCpu, 0); #ifdef SELM_TRACK_GUEST_LDT_CHANGES if (pVM->selm.s.GCPtrGuestLdt != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestLdt); AssertRC(rc); pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; } #endif STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VINF_SUCCESS; } /** @todo check what intel does about odd limits. */ AssertMsg(RT_ALIGN(cbLdt + 1, sizeof(X86DESC)) == cbLdt + 1 && cbLdt <= 0xffff, ("cbLdt=%d\n", cbLdt)); /* * Use the cached guest ldt address if the descriptor has already been modified (see below) * (this is necessary due to redundant LDT updates; see todo above at GDT sync) */ if (MMHyperIsInsideArea(pVM, GCPtrLdt)) GCPtrLdt = pVM->selm.s.GCPtrGuestLdt; /* use the old one */ #ifdef SELM_TRACK_GUEST_LDT_CHANGES /** @todo Handle only present LDT segments. */ // if (pDesc->Gen.u1Present) { /* * Check if Guest's LDT address/limit is changed. */ if ( GCPtrLdt != pVM->selm.s.GCPtrGuestLdt || cbLdt != pVM->selm.s.cbLdtLimit) { Log(("SELMR3UpdateFromCPUM: Guest LDT changed to from %RGv:%04x to %RGv:%04x. (GDTR=%016RX64:%04x)\n", pVM->selm.s.GCPtrGuestLdt, pVM->selm.s.cbLdtLimit, GCPtrLdt, cbLdt, pVM->selm.s.GuestGdtr.pGdt, pVM->selm.s.GuestGdtr.cbGdt)); /* * [Re]Register write virtual handler for guest's GDT. * In the event of LDT overlapping something, don't install it just assume it's being updated. */ if (pVM->selm.s.GCPtrGuestLdt != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestLdt); AssertRC(rc); } #ifdef DEBUG if (pDesc->Gen.u1Present) Log(("LDT selector marked not present!!\n")); #endif rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_WRITE, GCPtrLdt, GCPtrLdt + cbLdt /* already inclusive */, 0, selmR3GuestLDTWriteHandler, "selmRCGuestLDTWriteHandler", 0, "Guest LDT write access handler"); if (rc == VERR_PGM_HANDLER_VIRTUAL_CONFLICT) { /** @todo investigate the various cases where conflicts happen and try avoid them by enh. the instruction emulation. */ pVM->selm.s.GCPtrGuestLdt = RTRCPTR_MAX; Log(("WARNING: Guest LDT (%RGv:%04x) conflicted with existing access range!! Assumes LDT is begin updated. (GDTR=%016RX64:%04x)\n", GCPtrLdt, cbLdt, pVM->selm.s.GuestGdtr.pGdt, pVM->selm.s.GuestGdtr.cbGdt)); } else if (RT_SUCCESS(rc)) pVM->selm.s.GCPtrGuestLdt = GCPtrLdt; else { CPUMSetHyperLDTR(pVCpu, 0); STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return rc; } pVM->selm.s.cbLdtLimit = cbLdt; } } #else pVM->selm.s.cbLdtLimit = cbLdt; #endif /* * Calc Shadow LDT base. */ unsigned off; pVM->selm.s.offLdtHyper = off = (GCPtrLdt & PAGE_OFFSET_MASK); RTGCPTR GCPtrShadowLDT = (RTGCPTR)((RTGCUINTPTR)pVM->selm.s.pvLdtRC + off); PX86DESC pShadowLDT = (PX86DESC)((uintptr_t)pVM->selm.s.pvLdtR3 + off); /* * Enable the LDT selector in the shadow GDT. */ pDesc->Gen.u1Present = 1; pDesc->Gen.u16BaseLow = RT_LOWORD(GCPtrShadowLDT); pDesc->Gen.u8BaseHigh1 = RT_BYTE3(GCPtrShadowLDT); pDesc->Gen.u8BaseHigh2 = RT_BYTE4(GCPtrShadowLDT); pDesc->Gen.u1Available = 0; pDesc->Gen.u1Long = 0; if (cbLdt > 0xffff) { cbLdt = 0xffff; pDesc->Gen.u4LimitHigh = 0; pDesc->Gen.u16LimitLow = pDesc->Gen.u1Granularity ? 0xf : 0xffff; } /* * Set Hyper LDTR and notify TRPM. */ CPUMSetHyperLDTR(pVCpu, SelLdt); /* * Loop synchronising the LDT page by page. */ /** @todo investigate how intel handle various operations on half present cross page entries. */ off = GCPtrLdt & (sizeof(X86DESC) - 1); AssertMsg(!off, ("LDT is not aligned on entry size! GCPtrLdt=%08x\n", GCPtrLdt)); /* Note: Do not skip the first selector; unlike the GDT, a zero LDT selector is perfectly valid. */ unsigned cbLeft = cbLdt + 1; PX86DESC pLDTE = pShadowLDT; while (cbLeft) { /* * Read a chunk. */ unsigned cbChunk = PAGE_SIZE - ((RTGCUINTPTR)GCPtrLdt & PAGE_OFFSET_MASK); if (cbChunk > cbLeft) cbChunk = cbLeft; rc = PGMPhysSimpleReadGCPtr(pVCpu, pShadowLDT, GCPtrLdt, cbChunk); if (RT_SUCCESS(rc)) { /* * Mark page */ rc = PGMMapSetPage(pVM, GCPtrShadowLDT & PAGE_BASE_GC_MASK, PAGE_SIZE, X86_PTE_P | X86_PTE_A | X86_PTE_D); AssertRC(rc); /* * Loop thru the available LDT entries. * Figure out where to start and end and the potential cross pageness of * things adds a little complexity. pLDTE is updated there and not in the * 'next' part of the loop. The pLDTEEnd is inclusive. */ PX86DESC pLDTEEnd = (PX86DESC)((uintptr_t)pShadowLDT + cbChunk) - 1; if (pLDTE + 1 < pShadowLDT) pLDTE = (PX86DESC)((uintptr_t)pShadowLDT + off); while (pLDTE <= pLDTEEnd) { if (pLDTE->Gen.u1Present) { /* * Code and data selectors are generally 1:1, with the * 'little' adjustment we do for DPL 0 selectors. */ if (pLDTE->Gen.u1DescType) { /* * Hack for A-bit against Trap E on read-only GDT. */ /** @todo Fix this by loading ds and cs before turning off WP. */ if (!(pLDTE->Gen.u4Type & X86_SEL_TYPE_ACCESSED)) pLDTE->Gen.u4Type |= X86_SEL_TYPE_ACCESSED; /* * All DPL 0 code and data segments are squeezed into DPL 1. * * We're skipping conforming segments here because those * cannot give us any trouble. */ if ( pLDTE->Gen.u2Dpl == 0 && (pLDTE->Gen.u4Type & (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF)) != (X86_SEL_TYPE_CODE | X86_SEL_TYPE_CONF) ) pLDTE->Gen.u2Dpl = 1; } else { /* * System type selectors are marked not present. * Recompiler or special handling is required for these. */ /** @todo what about interrupt gates and rawr0? */ pLDTE->Gen.u1Present = 0; } } /* Next LDT entry. */ pLDTE++; } } else { AssertMsg(rc == VERR_PAGE_NOT_PRESENT || rc == VERR_PAGE_TABLE_NOT_PRESENT, ("rc=%Rrc\n", rc)); rc = PGMMapSetPage(pVM, GCPtrShadowLDT & PAGE_BASE_GC_MASK, PAGE_SIZE, 0); AssertRC(rc); } /* * Advance to the next page. */ cbLeft -= cbChunk; GCPtrShadowLDT += cbChunk; pShadowLDT = (PX86DESC)((char *)pShadowLDT + cbChunk); GCPtrLdt += cbChunk; } } STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return VINF_SUCCESS; } /** * \#PF Handler callback for virtual access handler ranges. * * Important to realize that a physical page in a range can have aliases, and * for ALL and WRITE handlers these will also trigger. * * @returns VINF_SUCCESS if the handler have carried out the operation. * @returns VINF_PGM_HANDLER_DO_DEFAULT if the caller should carry out the access operation. * @param pVM VM Handle. * @param GCPtr The virtual address the guest is writing to. (not correct if it's an alias!) * @param pvPtr The HC mapping of that address. * @param pvBuf What the guest is reading/writing. * @param cbBuf How much it's reading/writing. * @param enmAccessType The access type. * @param pvUser User argument. */ static DECLCALLBACK(int) selmR3GuestGDTWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPtr, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser) { Assert(enmAccessType == PGMACCESSTYPE_WRITE); Log(("selmR3GuestGDTWriteHandler: write to %RGv size %d\n", GCPtr, cbBuf)); VMCPU_FF_SET(VMMGetCpu(pVM), VMCPU_FF_SELM_SYNC_GDT); return VINF_PGM_HANDLER_DO_DEFAULT; } /** * \#PF Handler callback for virtual access handler ranges. * * Important to realize that a physical page in a range can have aliases, and * for ALL and WRITE handlers these will also trigger. * * @returns VINF_SUCCESS if the handler have carried out the operation. * @returns VINF_PGM_HANDLER_DO_DEFAULT if the caller should carry out the access operation. * @param pVM VM Handle. * @param GCPtr The virtual address the guest is writing to. (not correct if it's an alias!) * @param pvPtr The HC mapping of that address. * @param pvBuf What the guest is reading/writing. * @param cbBuf How much it's reading/writing. * @param enmAccessType The access type. * @param pvUser User argument. */ static DECLCALLBACK(int) selmR3GuestLDTWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPtr, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser) { Assert(enmAccessType == PGMACCESSTYPE_WRITE); Log(("selmR3GuestLDTWriteHandler: write to %RGv size %d\n", GCPtr, cbBuf)); VMCPU_FF_SET(VMMGetCpu(pVM), VMCPU_FF_SELM_SYNC_LDT); return VINF_PGM_HANDLER_DO_DEFAULT; } /** * \#PF Handler callback for virtual access handler ranges. * * Important to realize that a physical page in a range can have aliases, and * for ALL and WRITE handlers these will also trigger. * * @returns VINF_SUCCESS if the handler have carried out the operation. * @returns VINF_PGM_HANDLER_DO_DEFAULT if the caller should carry out the access operation. * @param pVM VM Handle. * @param GCPtr The virtual address the guest is writing to. (not correct if it's an alias!) * @param pvPtr The HC mapping of that address. * @param pvBuf What the guest is reading/writing. * @param cbBuf How much it's reading/writing. * @param enmAccessType The access type. * @param pvUser User argument. */ static DECLCALLBACK(int) selmR3GuestTSSWriteHandler(PVM pVM, RTGCPTR GCPtr, void *pvPtr, void *pvBuf, size_t cbBuf, PGMACCESSTYPE enmAccessType, void *pvUser) { Assert(enmAccessType == PGMACCESSTYPE_WRITE); Log(("selmR3GuestTSSWriteHandler: write %.*Rhxs to %RGv size %d\n", RT_MIN(8, cbBuf), pvBuf, GCPtr, cbBuf)); /** @todo This can be optimized by checking for the ESP0 offset and tracking TR * reloads in REM (setting VM_FF_SELM_SYNC_TSS if TR is reloaded). We * should probably also deregister the virtual handler if TR.base/size * changes while we're in REM. */ VMCPU_FF_SET(VMMGetCpu(pVM), VMCPU_FF_SELM_SYNC_TSS); return VINF_PGM_HANDLER_DO_DEFAULT; } /** * Synchronize the shadowed fields in the TSS. * * At present we're shadowing the ring-0 stack selector & pointer, and the * interrupt redirection bitmap (if present). We take the lazy approach wrt to * REM and this function is called both if REM made any changes to the TSS or * loaded TR. * * @returns VBox status code. * @param pVM The VM to operate on. * @param pVCpu The VMCPU to operate on. */ VMMR3DECL(int) SELMR3SyncTSS(PVM pVM, PVMCPU pVCpu) { int rc; if (pVM->selm.s.fDisableMonitoring) { VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_TSS); return VINF_SUCCESS; } STAM_PROFILE_START(&pVM->selm.s.StatTSSSync, a); Assert(VMCPU_FF_ISSET(pVCpu, VMCPU_FF_SELM_SYNC_TSS)); /* * Get TR and extract and store the basic info. * * Note! The TSS limit is not checked by the LTR code, so we * have to be a bit careful with it. We make sure cbTss * won't be zero if TR is valid and if it's NULL we'll * make sure cbTss is 0. */ CPUMSELREGHID trHid; RTSEL SelTss = CPUMGetGuestTR(pVCpu, &trHid); RTGCPTR GCPtrTss = trHid.u64Base; uint32_t cbTss = trHid.u32Limit; Assert( (SelTss & X86_SEL_MASK) || (cbTss == 0 && GCPtrTss == 0 && trHid.Attr.u == 0 /* TR=0 */) || (cbTss == 0xffff && GCPtrTss == 0 && trHid.Attr.n.u1Present && trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY /* RESET */)); if (SelTss & X86_SEL_MASK) { Assert(!(SelTss & X86_SEL_LDT)); Assert(trHid.Attr.n.u1DescType == 0); Assert( trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY || trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_BUSY); if (!++cbTss) cbTss = UINT32_MAX; } else { Assert( (cbTss == 0 && GCPtrTss == 0 && trHid.Attr.u == 0 /* TR=0 */) || (cbTss == 0xffff && GCPtrTss == 0 && trHid.Attr.n.u1Present && trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY /* RESET */)); cbTss = 0; /* the reset case. */ } pVM->selm.s.cbGuestTss = cbTss; pVM->selm.s.fGuestTss32Bit = trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_AVAIL || trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_BUSY; /* * Figure out the size of what need to monitor. */ /* We're not interested in any 16-bit TSSes. */ uint32_t cbMonitoredTss = cbTss; if ( trHid.Attr.n.u4Type != X86_SEL_TYPE_SYS_386_TSS_AVAIL && trHid.Attr.n.u4Type != X86_SEL_TYPE_SYS_386_TSS_BUSY) cbMonitoredTss = 0; pVM->selm.s.offGuestIoBitmap = 0; bool fNoRing1Stack = true; if (cbMonitoredTss) { /* * 32-bit TSS. What we're really keen on is the SS0 and ESP0 fields. * If VME is enabled we also want to keep an eye on the interrupt * redirection bitmap. */ VBOXTSS Tss; uint32_t cr4 = CPUMGetGuestCR4(pVCpu); rc = PGMPhysSimpleReadGCPtr(pVCpu, &Tss, GCPtrTss, RT_OFFSETOF(VBOXTSS, IntRedirBitmap)); if ( !(cr4 & X86_CR4_VME) || ( RT_SUCCESS(rc) && Tss.offIoBitmap < sizeof(VBOXTSS) /* too small */ && Tss.offIoBitmap > cbTss) /* beyond the end */ /** @todo not sure how the partial case is handled; probably not allowed. */ ) /* No interrupt redirection bitmap, just ESP0 and SS0. */ cbMonitoredTss = RT_UOFFSETOF(VBOXTSS, padding_ss0); else if (RT_SUCCESS(rc)) { /* * Everything up to and including the interrupt redirection bitmap. Unfortunately * this can be quite a large chunk. We use to skip it earlier and just hope it * was kind of static... * * Update the virtual interrupt redirection bitmap while we're here. * (It is located in the 32 bytes before TR:offIoBitmap.) */ cbMonitoredTss = Tss.offIoBitmap; pVM->selm.s.offGuestIoBitmap = Tss.offIoBitmap; uint32_t offRedirBitmap = Tss.offIoBitmap - sizeof(Tss.IntRedirBitmap); rc = PGMPhysSimpleReadGCPtr(pVCpu, &pVM->selm.s.Tss.IntRedirBitmap, GCPtrTss + offRedirBitmap, sizeof(Tss.IntRedirBitmap)); AssertRC(rc); /** @todo memset the bitmap on failure? */ Log2(("Redirection bitmap:\n")); Log2(("%.*Rhxd\n", sizeof(Tss.IntRedirBitmap), &pVM->selm.s.Tss.IntRedirBitmap)); } else { cbMonitoredTss = RT_OFFSETOF(VBOXTSS, IntRedirBitmap); pVM->selm.s.offGuestIoBitmap = 0; /** @todo memset the bitmap? */ } /* * Update the ring 0 stack selector and base address. */ if (RT_SUCCESS(rc)) { #ifdef LOG_ENABLED if (LogIsEnabled()) { uint32_t ssr0, espr0; SELMGetRing1Stack(pVM, &ssr0, &espr0); if ((ssr0 & ~1) != Tss.ss0 || espr0 != Tss.esp0) { RTGCPHYS GCPhys = NIL_RTGCPHYS; rc = PGMGstGetPage(pVCpu, GCPtrTss, NULL, &GCPhys); AssertRC(rc); Log(("SELMR3SyncTSS: Updating TSS ring 0 stack to %04X:%08X from %04X:%08X; TSS Phys=%RGp)\n", Tss.ss0, Tss.esp0, (ssr0 & ~1), espr0, GCPhys)); AssertMsg(ssr0 != Tss.ss0, ("ring-1 leak into TSS.SS0! %04X:%08X from %04X:%08X; TSS Phys=%RGp)\n", Tss.ss0, Tss.esp0, (ssr0 & ~1), espr0, GCPhys)); } Log(("offIoBitmap=%#x\n", Tss.offIoBitmap)); } #endif /* LOG_ENABLED */ AssertMsg(!(Tss.ss0 & 3), ("ring-1 leak into TSS.SS0? %04X:%08X\n", Tss.ss0, Tss.esp0)); /* Update our TSS structure for the guest's ring 1 stack */ selmSetRing1Stack(pVM, Tss.ss0 | 1, Tss.esp0); pVM->selm.s.fSyncTSSRing0Stack = fNoRing1Stack = false; } } /* * Flush the ring-1 stack and the direct syscall dispatching if we * cannot obtain SS0:ESP0. */ if (fNoRing1Stack) { selmSetRing1Stack(pVM, 0 /* invalid SS */, 0); pVM->selm.s.fSyncTSSRing0Stack = cbMonitoredTss != 0; /** @todo handle these dependencies better! */ TRPMR3SetGuestTrapHandler(pVM, 0x2E, TRPM_INVALID_HANDLER); TRPMR3SetGuestTrapHandler(pVM, 0x80, TRPM_INVALID_HANDLER); } /* * Check for monitor changes and apply them. */ if ( GCPtrTss != pVM->selm.s.GCPtrGuestTss || cbMonitoredTss != pVM->selm.s.cbMonitoredGuestTss) { Log(("SELMR3SyncTSS: Guest's TSS is changed to pTss=%RGv cbMonitoredTss=%08X cbGuestTss=%#08x\n", GCPtrTss, cbMonitoredTss, pVM->selm.s.cbGuestTss)); /* Release the old range first. */ if (pVM->selm.s.GCPtrGuestTss != RTRCPTR_MAX) { rc = PGMHandlerVirtualDeregister(pVM, pVM->selm.s.GCPtrGuestTss); AssertRC(rc); } /* Register the write handler if TS != 0. */ if (cbMonitoredTss != 0) { rc = PGMR3HandlerVirtualRegister(pVM, PGMVIRTHANDLERTYPE_WRITE, GCPtrTss, GCPtrTss + cbMonitoredTss - 1, 0, selmR3GuestTSSWriteHandler, "selmRCGuestTSSWriteHandler", 0, "Guest TSS write access handler"); if (RT_FAILURE(rc)) { STAM_PROFILE_STOP(&pVM->selm.s.StatUpdateFromCPUM, a); return rc; } /* Update saved Guest TSS info. */ pVM->selm.s.GCPtrGuestTss = GCPtrTss; pVM->selm.s.cbMonitoredGuestTss = cbMonitoredTss; pVM->selm.s.GCSelTss = SelTss; } else { pVM->selm.s.GCPtrGuestTss = RTRCPTR_MAX; pVM->selm.s.cbMonitoredGuestTss = 0; pVM->selm.s.GCSelTss = 0; } } VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_SELM_SYNC_TSS); STAM_PROFILE_STOP(&pVM->selm.s.StatTSSSync, a); return VINF_SUCCESS; } /** * Compares the Guest GDT and LDT with the shadow tables. * This is a VBOX_STRICT only function. * * @returns VBox status code. * @param pVM The VM Handle. */ VMMR3DECL(int) SELMR3DebugCheck(PVM pVM) { #ifdef VBOX_STRICT PVMCPU pVCpu = VMMGetCpu(pVM); /* * Get GDTR and check for conflict. */ VBOXGDTR GDTR; CPUMGetGuestGDTR(pVCpu, &GDTR); if (GDTR.cbGdt == 0) return VINF_SUCCESS; if (GDTR.cbGdt >= (unsigned)(pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] >> X86_SEL_SHIFT)) Log(("SELMR3DebugCheck: guest GDT size forced us to look for unused selectors.\n")); if (GDTR.cbGdt != pVM->selm.s.GuestGdtr.cbGdt) Log(("SELMR3DebugCheck: limits have changed! new=%d old=%d\n", GDTR.cbGdt, pVM->selm.s.GuestGdtr.cbGdt)); /* * Loop thru the GDT checking each entry. */ RTGCPTR GCPtrGDTEGuest = GDTR.pGdt; PX86DESC pGDTE = pVM->selm.s.paGdtR3; PX86DESC pGDTEEnd = (PX86DESC)((uintptr_t)pGDTE + GDTR.cbGdt); while (pGDTE < pGDTEEnd) { X86DESC GDTEGuest; int rc = PGMPhysSimpleReadGCPtr(pVCpu, &GDTEGuest, GCPtrGDTEGuest, sizeof(GDTEGuest)); if (RT_SUCCESS(rc)) { if (pGDTE->Gen.u1DescType || pGDTE->Gen.u4Type != X86_SEL_TYPE_SYS_LDT) { if ( pGDTE->Gen.u16LimitLow != GDTEGuest.Gen.u16LimitLow || pGDTE->Gen.u4LimitHigh != GDTEGuest.Gen.u4LimitHigh || pGDTE->Gen.u16BaseLow != GDTEGuest.Gen.u16BaseLow || pGDTE->Gen.u8BaseHigh1 != GDTEGuest.Gen.u8BaseHigh1 || pGDTE->Gen.u8BaseHigh2 != GDTEGuest.Gen.u8BaseHigh2 || pGDTE->Gen.u1DefBig != GDTEGuest.Gen.u1DefBig || pGDTE->Gen.u1DescType != GDTEGuest.Gen.u1DescType) { unsigned iGDT = pGDTE - pVM->selm.s.paGdtR3; SELMR3DumpDescriptor(*pGDTE, iGDT << 3, "SELMR3DebugCheck: GDT mismatch, shadow"); SELMR3DumpDescriptor(GDTEGuest, iGDT << 3, "SELMR3DebugCheck: GDT mismatch, guest"); } } } /* Advance to the next descriptor. */ GCPtrGDTEGuest += sizeof(X86DESC); pGDTE++; } /* * LDT? */ RTSEL SelLdt = CPUMGetGuestLDTR(pVCpu); if ((SelLdt & X86_SEL_MASK) == 0) return VINF_SUCCESS; if (SelLdt > GDTR.cbGdt) { Log(("SELMR3DebugCheck: ldt is out of bound SelLdt=%#x\n", SelLdt)); return VERR_INTERNAL_ERROR; } X86DESC LDTDesc; int rc = PGMPhysSimpleReadGCPtr(pVCpu, &LDTDesc, GDTR.pGdt + (SelLdt & X86_SEL_MASK), sizeof(LDTDesc)); if (RT_FAILURE(rc)) { Log(("SELMR3DebugCheck: Failed to read LDT descriptor. rc=%d\n", rc)); return rc; } RTGCPTR GCPtrLDTEGuest = X86DESC_BASE(LDTDesc); unsigned cbLdt = X86DESC_LIMIT(LDTDesc); if (LDTDesc.Gen.u1Granularity) cbLdt = (cbLdt << PAGE_SHIFT) | PAGE_OFFSET_MASK; /* * Validate it. */ if (!cbLdt) return VINF_SUCCESS; /** @todo check what intel does about odd limits. */ AssertMsg(RT_ALIGN(cbLdt + 1, sizeof(X86DESC)) == cbLdt + 1 && cbLdt <= 0xffff, ("cbLdt=%d\n", cbLdt)); if ( LDTDesc.Gen.u1DescType || LDTDesc.Gen.u4Type != X86_SEL_TYPE_SYS_LDT || SelLdt >= pVM->selm.s.GuestGdtr.cbGdt) { Log(("SELmR3DebugCheck: Invalid LDT %04x!\n", SelLdt)); return VERR_INTERNAL_ERROR; } /* * Loop thru the LDT checking each entry. */ unsigned off = (GCPtrLDTEGuest & PAGE_OFFSET_MASK); PX86DESC pLDTE = (PX86DESC)((uintptr_t)pVM->selm.s.pvLdtR3 + off); PX86DESC pLDTEEnd = (PX86DESC)((uintptr_t)pGDTE + cbLdt); while (pLDTE < pLDTEEnd) { X86DESC LDTEGuest; rc = PGMPhysSimpleReadGCPtr(pVCpu, &LDTEGuest, GCPtrLDTEGuest, sizeof(LDTEGuest)); if (RT_SUCCESS(rc)) { if ( pLDTE->Gen.u16LimitLow != LDTEGuest.Gen.u16LimitLow || pLDTE->Gen.u4LimitHigh != LDTEGuest.Gen.u4LimitHigh || pLDTE->Gen.u16BaseLow != LDTEGuest.Gen.u16BaseLow || pLDTE->Gen.u8BaseHigh1 != LDTEGuest.Gen.u8BaseHigh1 || pLDTE->Gen.u8BaseHigh2 != LDTEGuest.Gen.u8BaseHigh2 || pLDTE->Gen.u1DefBig != LDTEGuest.Gen.u1DefBig || pLDTE->Gen.u1DescType != LDTEGuest.Gen.u1DescType) { unsigned iLDT = pLDTE - (PX86DESC)((uintptr_t)pVM->selm.s.pvLdtR3 + off); SELMR3DumpDescriptor(*pLDTE, iLDT << 3, "SELMR3DebugCheck: LDT mismatch, shadow"); SELMR3DumpDescriptor(LDTEGuest, iLDT << 3, "SELMR3DebugCheck: LDT mismatch, guest"); } } /* Advance to the next descriptor. */ GCPtrLDTEGuest += sizeof(X86DESC); pLDTE++; } #else /* !VBOX_STRICT */ NOREF(pVM); #endif /* !VBOX_STRICT */ return VINF_SUCCESS; } /** * Validates the RawR0 TSS values against the one in the Guest TSS. * * @returns true if it matches. * @returns false and assertions on mismatch.. * @param pVM VM Handle. */ VMMR3DECL(bool) SELMR3CheckTSS(PVM pVM) { #ifdef VBOX_STRICT PVMCPU pVCpu = VMMGetCpu(pVM); if (VMCPU_FF_ISSET(pVCpu, VMCPU_FF_SELM_SYNC_TSS)) return true; /* * Get TR and extract the basic info. */ CPUMSELREGHID trHid; RTSEL SelTss = CPUMGetGuestTR(pVCpu, &trHid); RTGCPTR GCPtrTss = trHid.u64Base; uint32_t cbTss = trHid.u32Limit; Assert( (SelTss & X86_SEL_MASK) || (cbTss == 0 && GCPtrTss == 0 && trHid.Attr.u == 0 /* TR=0 */) || (cbTss == 0xffff && GCPtrTss == 0 && trHid.Attr.n.u1Present && trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY /* RESET */)); if (SelTss & X86_SEL_MASK) { AssertReturn(!(SelTss & X86_SEL_LDT), false); AssertReturn(trHid.Attr.n.u1DescType == 0, false); AssertReturn( trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY || trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_BUSY, false); if (!++cbTss) cbTss = UINT32_MAX; } else { AssertReturn( (cbTss == 0 && GCPtrTss == 0 && trHid.Attr.u == 0 /* TR=0 */) || (cbTss == 0xffff && GCPtrTss == 0 && trHid.Attr.n.u1Present && trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_286_TSS_BUSY /* RESET */), false); cbTss = 0; /* the reset case. */ } AssertMsgReturn(pVM->selm.s.cbGuestTss == cbTss, ("%#x %#x\n", pVM->selm.s.cbGuestTss, cbTss), false); AssertMsgReturn(pVM->selm.s.fGuestTss32Bit == ( trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_AVAIL || trHid.Attr.n.u4Type == X86_SEL_TYPE_SYS_386_TSS_BUSY), ("%RTbool u4Type=%d\n", pVM->selm.s.fGuestTss32Bit, trHid.Attr.n.u4Type), false); AssertMsgReturn( pVM->selm.s.GCSelTss == SelTss || (!pVM->selm.s.GCSelTss && !(SelTss & X86_SEL_LDT)), ("%#x %#x\n", pVM->selm.s.GCSelTss, SelTss), false); AssertMsgReturn( pVM->selm.s.GCPtrGuestTss == GCPtrTss || (pVM->selm.s.GCPtrGuestTss == RTRCPTR_MAX && !GCPtrTss), ("%#RGv %#RGv\n", pVM->selm.s.GCPtrGuestTss, GCPtrTss), false); /* * Figure out the size of what need to monitor. */ bool fNoRing1Stack = true; /* We're not interested in any 16-bit TSSes. */ uint32_t cbMonitoredTss = cbTss; if ( trHid.Attr.n.u4Type != X86_SEL_TYPE_SYS_386_TSS_AVAIL && trHid.Attr.n.u4Type != X86_SEL_TYPE_SYS_386_TSS_BUSY) cbMonitoredTss = 0; if (cbMonitoredTss) { VBOXTSS Tss; uint32_t cr4 = CPUMGetGuestCR4(pVCpu); int rc = PGMPhysSimpleReadGCPtr(pVCpu, &Tss, GCPtrTss, RT_OFFSETOF(VBOXTSS, IntRedirBitmap)); AssertReturn( rc == VINF_SUCCESS /* Happends early in XP boot during page table switching. */ || ( (rc == VERR_PAGE_TABLE_NOT_PRESENT || rc == VERR_PAGE_NOT_PRESENT) && !(CPUMGetGuestEFlags(pVCpu) & X86_EFL_IF)), false); if ( !(cr4 & X86_CR4_VME) || ( RT_SUCCESS(rc) && Tss.offIoBitmap < sizeof(VBOXTSS) /* too small */ && Tss.offIoBitmap > cbTss) ) cbMonitoredTss = RT_UOFFSETOF(VBOXTSS, padding_ss0); else if (RT_SUCCESS(rc)) { cbMonitoredTss = Tss.offIoBitmap; AssertMsgReturn(pVM->selm.s.offGuestIoBitmap == Tss.offIoBitmap, ("#x %#x\n", pVM->selm.s.offGuestIoBitmap, Tss.offIoBitmap), false); /* check the bitmap */ uint32_t offRedirBitmap = Tss.offIoBitmap - sizeof(Tss.IntRedirBitmap); rc = PGMPhysSimpleReadGCPtr(pVCpu, &Tss.IntRedirBitmap, GCPtrTss + offRedirBitmap, sizeof(Tss.IntRedirBitmap)); AssertRCReturn(rc, false); AssertMsgReturn(!memcmp(&Tss.IntRedirBitmap[0], &pVM->selm.s.Tss.IntRedirBitmap[0], sizeof(Tss.IntRedirBitmap)), ("offIoBitmap=%#x cbTss=%#x\n" " Guest: %.32Rhxs\n" "Shadow: %.32Rhxs\n", Tss.offIoBitmap, cbTss, &Tss.IntRedirBitmap[0], &pVM->selm.s.Tss.IntRedirBitmap[0]), false); } else cbMonitoredTss = RT_OFFSETOF(VBOXTSS, IntRedirBitmap); /* * Check SS0 and ESP0. */ if ( !pVM->selm.s.fSyncTSSRing0Stack && RT_SUCCESS(rc)) { if ( Tss.esp0 != pVM->selm.s.Tss.esp1 || Tss.ss0 != (pVM->selm.s.Tss.ss1 & ~1)) { RTGCPHYS GCPhys; rc = PGMGstGetPage(pVCpu, GCPtrTss, NULL, &GCPhys); AssertRC(rc); AssertMsgFailed(("TSS out of sync!! (%04X:%08X vs %04X:%08X (guest)) Tss=%RGv Phys=%RGp\n", (pVM->selm.s.Tss.ss1 & ~1), pVM->selm.s.Tss.esp1, Tss.ss1, Tss.esp1, GCPtrTss, GCPhys)); return false; } } AssertMsgReturn(pVM->selm.s.cbMonitoredGuestTss == cbMonitoredTss, ("%#x %#x\n", pVM->selm.s.cbMonitoredGuestTss, cbMonitoredTss), false); } else { AssertMsgReturn(pVM->selm.s.Tss.ss1 == 0 && pVM->selm.s.Tss.esp1 == 0, ("%04x:%08x\n", pVM->selm.s.Tss.ss1, pVM->selm.s.Tss.esp1), false); AssertReturn(!pVM->selm.s.fSyncTSSRing0Stack, false); AssertMsgReturn(pVM->selm.s.cbMonitoredGuestTss == cbMonitoredTss, ("%#x %#x\n", pVM->selm.s.cbMonitoredGuestTss, cbMonitoredTss), false); } return true; #else /* !VBOX_STRICT */ NOREF(pVM); return true; #endif /* !VBOX_STRICT */ } /** * Returns flat address and limit of LDT by LDT selector from guest GDTR. * * Fully validate selector. * * @returns VBox status. * @param pVM VM Handle. * @param SelLdt LDT selector. * @param ppvLdt Where to store the flat address of LDT. * @param pcbLimit Where to store LDT limit. */ VMMDECL(int) SELMGetLDTFromSel(PVM pVM, RTSEL SelLdt, PRTGCPTR ppvLdt, unsigned *pcbLimit) { PVMCPU pVCpu = VMMGetCpu(pVM); /* Get guest GDTR. */ VBOXGDTR GDTR; CPUMGetGuestGDTR(pVCpu, &GDTR); /* Check selector TI and GDT limit. */ if ( (SelLdt & X86_SEL_LDT) || SelLdt > GDTR.cbGdt) return VERR_INVALID_SELECTOR; /* Read descriptor from GC. */ X86DESC Desc; int rc = PGMPhysSimpleReadGCPtr(pVCpu, (void *)&Desc, (RTGCPTR)(GDTR.pGdt + (SelLdt & X86_SEL_MASK)), sizeof(Desc)); if (RT_FAILURE(rc)) { /* fatal */ AssertMsgFailed(("Can't read LDT descriptor for selector=%04X\n", SelLdt)); return VERR_SELECTOR_NOT_PRESENT; } /* Check if LDT descriptor is not present. */ if (Desc.Gen.u1Present == 0) return VERR_SELECTOR_NOT_PRESENT; /* Check LDT descriptor type. */ if ( Desc.Gen.u1DescType == 1 || Desc.Gen.u4Type != X86_SEL_TYPE_SYS_LDT) return VERR_INVALID_SELECTOR; /* LDT descriptor is ok. */ if (ppvLdt) { *ppvLdt = (RTGCPTR)X86DESC_BASE(Desc); *pcbLimit = X86DESC_LIMIT(Desc); } return VINF_SUCCESS; } /** * Gets information about a 64-bit selector, SELMR3GetSelectorInfo helper. * * See SELMR3GetSelectorInfo for details. * * @returns VBox status code, see SELMR3GetSelectorInfo for details. * * @param pVM VM handle. * @param pVCpu VMCPU handle. * @param Sel The selector to get info about. * @param pSelInfo Where to store the information. */ static int selmR3GetSelectorInfo64(PVM pVM, PVMCPU pVCpu, RTSEL Sel, PDBGFSELINFO pSelInfo) { /* * Read it from the guest descriptor table. */ X86DESC64 Desc; VBOXGDTR Gdtr; RTGCPTR GCPtrDesc; CPUMGetGuestGDTR(pVCpu, &Gdtr); if (!(Sel & X86_SEL_LDT)) { /* GDT */ if ((unsigned)(Sel & X86_SEL_MASK) + sizeof(X86DESC) - 1 > (unsigned)Gdtr.cbGdt) return VERR_INVALID_SELECTOR; GCPtrDesc = Gdtr.pGdt + (Sel & X86_SEL_MASK); } else { /* * LDT - must locate the LDT first. */ RTSEL SelLdt = CPUMGetGuestLDTR(pVCpu); if ( (unsigned)(SelLdt & X86_SEL_MASK) < sizeof(X86DESC) /* the first selector is invalid, right? */ /** @todo r=bird: No, I don't think so */ || (unsigned)(SelLdt & X86_SEL_MASK) + sizeof(X86DESC) - 1 > (unsigned)Gdtr.cbGdt) return VERR_INVALID_SELECTOR; GCPtrDesc = Gdtr.pGdt + (SelLdt & X86_SEL_MASK); int rc = PGMPhysSimpleReadGCPtr(pVCpu, &Desc, GCPtrDesc, sizeof(Desc)); if (RT_FAILURE(rc)) return rc; /* validate the LDT descriptor. */ if (Desc.Gen.u1Present == 0) return VERR_SELECTOR_NOT_PRESENT; if ( Desc.Gen.u1DescType == 1 || Desc.Gen.u4Type != AMD64_SEL_TYPE_SYS_LDT) return VERR_INVALID_SELECTOR; uint32_t cbLimit = X86DESC_LIMIT(Desc); if (Desc.Gen.u1Granularity) cbLimit = (cbLimit << PAGE_SHIFT) | PAGE_OFFSET_MASK; if ((uint32_t)(Sel & X86_SEL_MASK) + sizeof(X86DESC) - 1 > cbLimit) return VERR_INVALID_SELECTOR; /* calc the descriptor location. */ GCPtrDesc = X86DESC64_BASE(Desc); GCPtrDesc += (Sel & X86_SEL_MASK); } /* read the descriptor. */ int rc = PGMPhysSimpleReadGCPtr(pVCpu, &Desc, GCPtrDesc, sizeof(Desc)); if (RT_FAILURE(rc)) { rc = PGMPhysSimpleReadGCPtr(pVCpu, &Desc, GCPtrDesc, sizeof(X86DESC)); if (RT_FAILURE(rc)) return rc; Desc.au64[1] = 0; } /* * Extract the base and limit * (We ignore the present bit here, which is probably a bit silly...) */ pSelInfo->Sel = Sel; pSelInfo->fFlags = DBGFSELINFO_FLAGS_LONG_MODE; pSelInfo->u.Raw64 = Desc; if (Desc.Gen.u1DescType) { /* * 64-bit code selectors are wide open, it's not possible to detect * 64-bit data or stack selectors without also dragging in assumptions * about current CS (i.e. that's we're executing in 64-bit mode). So, * the selinfo user needs to deal with this in the context the info is * used unfortunately. */ if ( Desc.Gen.u1Long && !Desc.Gen.u1DefBig && (Desc.Gen.u4Type & X86_SEL_TYPE_CODE)) { /* Note! We ignore the segment limit hacks that was added by AMD. */ pSelInfo->GCPtrBase = 0; pSelInfo->cbLimit = ~(RTGCUINTPTR)0; } else { pSelInfo->cbLimit = X86DESC_LIMIT(Desc); if (Desc.Gen.u1Granularity) pSelInfo->cbLimit = (pSelInfo->cbLimit << PAGE_SHIFT) | PAGE_OFFSET_MASK; pSelInfo->GCPtrBase = X86DESC_BASE(Desc); } pSelInfo->SelGate = 0; } else if ( Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_LDT || Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_TSS_AVAIL || Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_TSS_BUSY) { /* Note. LDT descriptors are weird in long mode, we ignore the footnote in the AMD manual here as a simplification. */ pSelInfo->GCPtrBase = X86DESC64_BASE(Desc); pSelInfo->cbLimit = X86DESC_LIMIT(Desc); if (Desc.Gen.u1Granularity) pSelInfo->cbLimit = (pSelInfo->cbLimit << PAGE_SHIFT) | PAGE_OFFSET_MASK; pSelInfo->SelGate = 0; } else if ( Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_CALL_GATE || Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_TRAP_GATE || Desc.Gen.u4Type == AMD64_SEL_TYPE_SYS_INT_GATE) { pSelInfo->cbLimit = X86DESC64_BASE(Desc); pSelInfo->GCPtrBase = Desc.Gate.u16OffsetLow | ((uint32_t)Desc.Gate.u16OffsetHigh << 16) | ((uint64_t)Desc.Gate.u32OffsetTop << 32); pSelInfo->SelGate = Desc.Gate.u16Sel; pSelInfo->fFlags |= DBGFSELINFO_FLAGS_GATE; } else { pSelInfo->cbLimit = 0; pSelInfo->GCPtrBase = 0; pSelInfo->SelGate = 0; pSelInfo->fFlags |= DBGFSELINFO_FLAGS_INVALID; } if (!Desc.Gen.u1Present) pSelInfo->fFlags |= DBGFSELINFO_FLAGS_NOT_PRESENT; return VINF_SUCCESS; } /** * Worker for selmR3GetSelectorInfo32 and SELMR3GetShadowSelectorInfo that * interprets a legacy descriptor table entry and fills in the selector info * structure from it. * * @param pSelInfo Where to store the selector info. Only the fFlags and * Sel members have been initialized. * @param pDesc The legacy descriptor to parse. */ DECLINLINE(void) selmR3SelInfoFromDesc32(PDBGFSELINFO pSelInfo, PCX86DESC pDesc) { pSelInfo->u.Raw64.au64[1] = 0; pSelInfo->u.Raw = *pDesc; if ( pDesc->Gen.u1DescType || !(pDesc->Gen.u4Type & 4)) { pSelInfo->cbLimit = X86DESC_LIMIT(*pDesc); if (pDesc->Gen.u1Granularity) pSelInfo->cbLimit = (pSelInfo->cbLimit << PAGE_SHIFT) | PAGE_OFFSET_MASK; pSelInfo->GCPtrBase = X86DESC_BASE(*pDesc); pSelInfo->SelGate = 0; } else if (pDesc->Gen.u4Type != X86_SEL_TYPE_SYS_UNDEFINED4) { pSelInfo->cbLimit = 0; if (pDesc->Gen.u4Type == X86_SEL_TYPE_SYS_TASK_GATE) pSelInfo->GCPtrBase = 0; else pSelInfo->GCPtrBase = pDesc->Gate.u16OffsetLow | (uint32_t)pDesc->Gate.u16OffsetHigh << 16; pSelInfo->SelGate = pDesc->Gate.u16Sel; pSelInfo->fFlags |= DBGFSELINFO_FLAGS_GATE; } else { pSelInfo->cbLimit = 0; pSelInfo->GCPtrBase = 0; pSelInfo->SelGate = 0; pSelInfo->fFlags |= DBGFSELINFO_FLAGS_INVALID; } if (!pDesc->Gen.u1Present) pSelInfo->fFlags |= DBGFSELINFO_FLAGS_NOT_PRESENT; } /** * Gets information about a 64-bit selector, SELMR3GetSelectorInfo helper. * * See SELMR3GetSelectorInfo for details. * * @returns VBox status code, see SELMR3GetSelectorInfo for details. * * @param pVM VM handle. * @param pVCpu VMCPU handle. * @param Sel The selector to get info about. * @param pSelInfo Where to store the information. */ static int selmR3GetSelectorInfo32(PVM pVM, PVMCPU pVCpu, RTSEL Sel, PDBGFSELINFO pSelInfo) { /* * Read the descriptor entry */ pSelInfo->fFlags = 0; X86DESC Desc; if ( !(Sel & X86_SEL_LDT) && ( pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] == (Sel & X86_SEL_MASK)) ) { /* * Hypervisor descriptor. */ pSelInfo->fFlags = DBGFSELINFO_FLAGS_HYPER; if (CPUMIsGuestInProtectedMode(pVCpu)) pSelInfo->fFlags |= DBGFSELINFO_FLAGS_PROT_MODE; else pSelInfo->fFlags |= DBGFSELINFO_FLAGS_REAL_MODE; Desc = pVM->selm.s.paGdtR3[Sel >> X86_SEL_SHIFT]; } else if (CPUMIsGuestInProtectedMode(pVCpu)) { /* * Read it from the guest descriptor table. */ pSelInfo->fFlags = DBGFSELINFO_FLAGS_PROT_MODE; VBOXGDTR Gdtr; RTGCPTR GCPtrDesc; CPUMGetGuestGDTR(pVCpu, &Gdtr); if (!(Sel & X86_SEL_LDT)) { /* GDT */ if ((unsigned)(Sel & X86_SEL_MASK) + sizeof(X86DESC) - 1 > (unsigned)Gdtr.cbGdt) return VERR_INVALID_SELECTOR; GCPtrDesc = Gdtr.pGdt + (Sel & X86_SEL_MASK); } else { /* * LDT - must locate the LDT first... */ RTSEL SelLdt = CPUMGetGuestLDTR(pVCpu); if ( (unsigned)(SelLdt & X86_SEL_MASK) < sizeof(X86DESC) /* the first selector is invalid, right? */ /** @todo r=bird: No, I don't think so */ || (unsigned)(SelLdt & X86_SEL_MASK) + sizeof(X86DESC) - 1 > (unsigned)Gdtr.cbGdt) return VERR_INVALID_SELECTOR; GCPtrDesc = Gdtr.pGdt + (SelLdt & X86_SEL_MASK); int rc = PGMPhysSimpleReadGCPtr(pVCpu, &Desc, GCPtrDesc, sizeof(Desc)); if (RT_FAILURE(rc)) return rc; /* validate the LDT descriptor. */ if (Desc.Gen.u1Present == 0) return VERR_SELECTOR_NOT_PRESENT; if ( Desc.Gen.u1DescType == 1 || Desc.Gen.u4Type != X86_SEL_TYPE_SYS_LDT) return VERR_INVALID_SELECTOR; unsigned cbLimit = X86DESC_LIMIT(Desc); if (Desc.Gen.u1Granularity) cbLimit = (cbLimit << PAGE_SHIFT) | PAGE_OFFSET_MASK; if ((unsigned)(Sel & X86_SEL_MASK) + sizeof(X86DESC) - 1 > cbLimit) return VERR_INVALID_SELECTOR; /* calc the descriptor location. */ GCPtrDesc = X86DESC_BASE(Desc); GCPtrDesc += (Sel & X86_SEL_MASK); } /* read the descriptor. */ int rc = PGMPhysSimpleReadGCPtr(pVCpu, &Desc, GCPtrDesc, sizeof(Desc)); if (RT_FAILURE(rc)) return rc; } else { /* * We're in real mode. */ pSelInfo->Sel = Sel; pSelInfo->GCPtrBase = Sel << 4; pSelInfo->cbLimit = 0xffff; pSelInfo->fFlags = DBGFSELINFO_FLAGS_REAL_MODE; pSelInfo->u.Raw64.au64[0] = 0; pSelInfo->u.Raw64.au64[1] = 0; pSelInfo->SelGate = 0; return VINF_SUCCESS; } /* * Extract the base and limit or sel:offset for gates. */ pSelInfo->Sel = Sel; selmR3SelInfoFromDesc32(pSelInfo, &Desc); return VINF_SUCCESS; } /** * Gets information about a selector. * * Intended for the debugger mostly and will prefer the guest descriptor tables * over the shadow ones. * * @retval VINF_SUCCESS on success. * @retval VERR_INVALID_SELECTOR if the selector isn't fully inside the * descriptor table. * @retval VERR_SELECTOR_NOT_PRESENT if the LDT is invalid or not present. This * is not returned if the selector itself isn't present, you have to * check that for yourself (see DBGFSELINFO::fFlags). * @retval VERR_PAGE_TABLE_NOT_PRESENT or VERR_PAGE_NOT_PRESENT if the * pagetable or page backing the selector table wasn't present. * @returns Other VBox status code on other errors. * * @param pVM VM handle. * @param pVCpu The virtual CPU handle. * @param Sel The selector to get info about. * @param pSelInfo Where to store the information. */ VMMR3DECL(int) SELMR3GetSelectorInfo(PVM pVM, PVMCPU pVCpu, RTSEL Sel, PDBGFSELINFO pSelInfo) { AssertPtr(pSelInfo); if (CPUMIsGuestInLongMode(pVCpu)) return selmR3GetSelectorInfo64(pVM, pVCpu, Sel, pSelInfo); return selmR3GetSelectorInfo32(pVM, pVCpu, Sel, pSelInfo); } /** * Gets information about a selector from the shadow tables. * * This is intended to be faster than the SELMR3GetSelectorInfo() method, but * requires that the caller ensures that the shadow tables are up to date. * * @retval VINF_SUCCESS on success. * @retval VERR_INVALID_SELECTOR if the selector isn't fully inside the * descriptor table. * @retval VERR_SELECTOR_NOT_PRESENT if the LDT is invalid or not present. This * is not returned if the selector itself isn't present, you have to * check that for yourself (see DBGFSELINFO::fFlags). * @retval VERR_PAGE_TABLE_NOT_PRESENT or VERR_PAGE_NOT_PRESENT if the * pagetable or page backing the selector table wasn't present. * @returns Other VBox status code on other errors. * * @param pVM VM handle. * @param Sel The selector to get info about. * @param pSelInfo Where to store the information. * * @remarks Don't use this when in hardware assisted virtualization mode. */ VMMR3DECL(int) SELMR3GetShadowSelectorInfo(PVM pVM, RTSEL Sel, PDBGFSELINFO pSelInfo) { Assert(pSelInfo); /* * Read the descriptor entry */ X86DESC Desc; if (!(Sel & X86_SEL_LDT)) { /* * Global descriptor. */ Desc = pVM->selm.s.paGdtR3[Sel >> X86_SEL_SHIFT]; pSelInfo->fFlags = pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] == (Sel & X86_SEL_MASK) || pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] == (Sel & X86_SEL_MASK) ? DBGFSELINFO_FLAGS_HYPER : 0; /** @todo check that the GDT offset is valid. */ } else { /* * Local Descriptor. */ PX86DESC paLDT = (PX86DESC)((char *)pVM->selm.s.pvLdtR3 + pVM->selm.s.offLdtHyper); Desc = paLDT[Sel >> X86_SEL_SHIFT]; /** @todo check if the LDT page is actually available. */ /** @todo check that the LDT offset is valid. */ pSelInfo->fFlags = 0; } if (CPUMIsGuestInProtectedMode(VMMGetCpu0(pVM))) pSelInfo->fFlags |= DBGFSELINFO_FLAGS_PROT_MODE; else pSelInfo->fFlags |= DBGFSELINFO_FLAGS_REAL_MODE; /* * Extract the base and limit or sel:offset for gates. */ pSelInfo->Sel = Sel; selmR3SelInfoFromDesc32(pSelInfo, &Desc); return VINF_SUCCESS; } /** * Formats a descriptor. * * @param Desc Descriptor to format. * @param Sel Selector number. * @param pszOutput Output buffer. * @param cchOutput Size of output buffer. */ static void selmR3FormatDescriptor(X86DESC Desc, RTSEL Sel, char *pszOutput, size_t cchOutput) { /* * Make variable description string. */ static struct { unsigned cch; const char *psz; } const aTypes[32] = { #define STRENTRY(str) { sizeof(str) - 1, str } /* system */ STRENTRY("Reserved0 "), /* 0x00 */ STRENTRY("TSS16Avail "), /* 0x01 */ STRENTRY("LDT "), /* 0x02 */ STRENTRY("TSS16Busy "), /* 0x03 */ STRENTRY("Call16 "), /* 0x04 */ STRENTRY("Task "), /* 0x05 */ STRENTRY("Int16 "), /* 0x06 */ STRENTRY("Trap16 "), /* 0x07 */ STRENTRY("Reserved8 "), /* 0x08 */ STRENTRY("TSS32Avail "), /* 0x09 */ STRENTRY("ReservedA "), /* 0x0a */ STRENTRY("TSS32Busy "), /* 0x0b */ STRENTRY("Call32 "), /* 0x0c */ STRENTRY("ReservedD "), /* 0x0d */ STRENTRY("Int32 "), /* 0x0e */ STRENTRY("Trap32 "), /* 0x0f */ /* non system */ STRENTRY("DataRO "), /* 0x10 */ STRENTRY("DataRO Accessed "), /* 0x11 */ STRENTRY("DataRW "), /* 0x12 */ STRENTRY("DataRW Accessed "), /* 0x13 */ STRENTRY("DataDownRO "), /* 0x14 */ STRENTRY("DataDownRO Accessed "), /* 0x15 */ STRENTRY("DataDownRW "), /* 0x16 */ STRENTRY("DataDownRW Accessed "), /* 0x17 */ STRENTRY("CodeEO "), /* 0x18 */ STRENTRY("CodeEO Accessed "), /* 0x19 */ STRENTRY("CodeER "), /* 0x1a */ STRENTRY("CodeER Accessed "), /* 0x1b */ STRENTRY("CodeConfEO "), /* 0x1c */ STRENTRY("CodeConfEO Accessed "), /* 0x1d */ STRENTRY("CodeConfER "), /* 0x1e */ STRENTRY("CodeConfER Accessed ") /* 0x1f */ #undef SYSENTRY }; #define ADD_STR(psz, pszAdd) do { strcpy(psz, pszAdd); psz += strlen(pszAdd); } while (0) char szMsg[128]; char *psz = &szMsg[0]; unsigned i = Desc.Gen.u1DescType << 4 | Desc.Gen.u4Type; memcpy(psz, aTypes[i].psz, aTypes[i].cch); psz += aTypes[i].cch; if (Desc.Gen.u1Present) ADD_STR(psz, "Present "); else ADD_STR(psz, "Not-Present "); if (Desc.Gen.u1Granularity) ADD_STR(psz, "Page "); if (Desc.Gen.u1DefBig) ADD_STR(psz, "32-bit "); else ADD_STR(psz, "16-bit "); #undef ADD_STR *psz = '\0'; /* * Limit and Base and format the output. */ uint32_t u32Limit = X86DESC_LIMIT(Desc); if (Desc.Gen.u1Granularity) u32Limit = u32Limit << PAGE_SHIFT | PAGE_OFFSET_MASK; uint32_t u32Base = X86DESC_BASE(Desc); RTStrPrintf(pszOutput, cchOutput, "%04x - %08x %08x - base=%08x limit=%08x dpl=%d %s", Sel, Desc.au32[0], Desc.au32[1], u32Base, u32Limit, Desc.Gen.u2Dpl, szMsg); } /** * Dumps a descriptor. * * @param Desc Descriptor to dump. * @param Sel Selector number. * @param pszMsg Message to prepend the log entry with. */ VMMR3DECL(void) SELMR3DumpDescriptor(X86DESC Desc, RTSEL Sel, const char *pszMsg) { char szOutput[128]; selmR3FormatDescriptor(Desc, Sel, &szOutput[0], sizeof(szOutput)); Log(("%s: %s\n", pszMsg, szOutput)); NOREF(szOutput[0]); } /** * Display the shadow gdt. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) selmR3InfoGdt(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { pHlp->pfnPrintf(pHlp, "Shadow GDT (GCAddr=%RRv):\n", MMHyperR3ToRC(pVM, pVM->selm.s.paGdtR3)); for (unsigned iGDT = 0; iGDT < SELM_GDT_ELEMENTS; iGDT++) { if (pVM->selm.s.paGdtR3[iGDT].Gen.u1Present) { char szOutput[128]; selmR3FormatDescriptor(pVM->selm.s.paGdtR3[iGDT], iGDT << X86_SEL_SHIFT, &szOutput[0], sizeof(szOutput)); const char *psz = ""; if (iGDT == ((unsigned)pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS] >> X86_SEL_SHIFT)) psz = " HyperCS"; else if (iGDT == ((unsigned)pVM->selm.s.aHyperSel[SELM_HYPER_SEL_DS] >> X86_SEL_SHIFT)) psz = " HyperDS"; else if (iGDT == ((unsigned)pVM->selm.s.aHyperSel[SELM_HYPER_SEL_CS64] >> X86_SEL_SHIFT)) psz = " HyperCS64"; else if (iGDT == ((unsigned)pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS] >> X86_SEL_SHIFT)) psz = " HyperTSS"; else if (iGDT == ((unsigned)pVM->selm.s.aHyperSel[SELM_HYPER_SEL_TSS_TRAP08] >> X86_SEL_SHIFT)) psz = " HyperTSSTrap08"; pHlp->pfnPrintf(pHlp, "%s%s\n", szOutput, psz); } } } /** * Display the guest gdt. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) selmR3InfoGdtGuest(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { /** @todo SMP support! */ PVMCPU pVCpu = &pVM->aCpus[0]; VBOXGDTR GDTR; CPUMGetGuestGDTR(pVCpu, &GDTR); RTGCPTR GCPtrGDT = GDTR.pGdt; unsigned cGDTs = ((unsigned)GDTR.cbGdt + 1) / sizeof(X86DESC); pHlp->pfnPrintf(pHlp, "Guest GDT (GCAddr=%RGv limit=%x):\n", GCPtrGDT, GDTR.cbGdt); for (unsigned iGDT = 0; iGDT < cGDTs; iGDT++, GCPtrGDT += sizeof(X86DESC)) { X86DESC GDTE; int rc = PGMPhysSimpleReadGCPtr(pVCpu, &GDTE, GCPtrGDT, sizeof(GDTE)); if (RT_SUCCESS(rc)) { if (GDTE.Gen.u1Present) { char szOutput[128]; selmR3FormatDescriptor(GDTE, iGDT << X86_SEL_SHIFT, &szOutput[0], sizeof(szOutput)); pHlp->pfnPrintf(pHlp, "%s\n", szOutput); } } else if (rc == VERR_PAGE_NOT_PRESENT) { if ((GCPtrGDT & PAGE_OFFSET_MASK) + sizeof(X86DESC) - 1 < sizeof(X86DESC)) pHlp->pfnPrintf(pHlp, "%04x - page not present (GCAddr=%RGv)\n", iGDT << X86_SEL_SHIFT, GCPtrGDT); } else pHlp->pfnPrintf(pHlp, "%04x - read error rc=%Rrc GCAddr=%RGv\n", iGDT << X86_SEL_SHIFT, rc, GCPtrGDT); } } /** * Display the shadow ldt. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) selmR3InfoLdt(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { unsigned cLDTs = ((unsigned)pVM->selm.s.cbLdtLimit + 1) >> X86_SEL_SHIFT; PX86DESC paLDT = (PX86DESC)((char *)pVM->selm.s.pvLdtR3 + pVM->selm.s.offLdtHyper); pHlp->pfnPrintf(pHlp, "Shadow LDT (GCAddr=%RRv limit=%#x):\n", pVM->selm.s.pvLdtRC + pVM->selm.s.offLdtHyper, pVM->selm.s.cbLdtLimit); for (unsigned iLDT = 0; iLDT < cLDTs; iLDT++) { if (paLDT[iLDT].Gen.u1Present) { char szOutput[128]; selmR3FormatDescriptor(paLDT[iLDT], (iLDT << X86_SEL_SHIFT) | X86_SEL_LDT, &szOutput[0], sizeof(szOutput)); pHlp->pfnPrintf(pHlp, "%s\n", szOutput); } } } /** * Display the guest ldt. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) selmR3InfoLdtGuest(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { /** @todo SMP support! */ PVMCPU pVCpu = &pVM->aCpus[0]; RTSEL SelLdt = CPUMGetGuestLDTR(pVCpu); if (!(SelLdt & X86_SEL_MASK)) { pHlp->pfnPrintf(pHlp, "Guest LDT (Sel=%x): Null-Selector\n", SelLdt); return; } RTGCPTR GCPtrLdt; unsigned cbLdt; int rc = SELMGetLDTFromSel(pVM, SelLdt, &GCPtrLdt, &cbLdt); if (RT_FAILURE(rc)) { pHlp->pfnPrintf(pHlp, "Guest LDT (Sel=%x): rc=%Rrc\n", SelLdt, rc); return; } pHlp->pfnPrintf(pHlp, "Guest LDT (Sel=%x GCAddr=%RGv limit=%x):\n", SelLdt, GCPtrLdt, cbLdt); unsigned cLdts = (cbLdt + 1) >> X86_SEL_SHIFT; for (unsigned iLdt = 0; iLdt < cLdts; iLdt++, GCPtrLdt += sizeof(X86DESC)) { X86DESC LdtE; rc = PGMPhysSimpleReadGCPtr(pVCpu, &LdtE, GCPtrLdt, sizeof(LdtE)); if (RT_SUCCESS(rc)) { if (LdtE.Gen.u1Present) { char szOutput[128]; selmR3FormatDescriptor(LdtE, (iLdt << X86_SEL_SHIFT) | X86_SEL_LDT, &szOutput[0], sizeof(szOutput)); pHlp->pfnPrintf(pHlp, "%s\n", szOutput); } } else if (rc == VERR_PAGE_NOT_PRESENT) { if ((GCPtrLdt & PAGE_OFFSET_MASK) + sizeof(X86DESC) - 1 < sizeof(X86DESC)) pHlp->pfnPrintf(pHlp, "%04x - page not present (GCAddr=%RGv)\n", (iLdt << X86_SEL_SHIFT) | X86_SEL_LDT, GCPtrLdt); } else pHlp->pfnPrintf(pHlp, "%04x - read error rc=%Rrc GCAddr=%RGv\n", (iLdt << X86_SEL_SHIFT) | X86_SEL_LDT, rc, GCPtrLdt); } } /** * Dumps the hypervisor GDT * * @param pVM VM handle. */ VMMR3DECL(void) SELMR3DumpHyperGDT(PVM pVM) { DBGFR3Info(pVM, "gdt", NULL, NULL); } /** * Dumps the hypervisor LDT * * @param pVM VM handle. */ VMMR3DECL(void) SELMR3DumpHyperLDT(PVM pVM) { DBGFR3Info(pVM, "ldt", NULL, NULL); } /** * Dumps the guest GDT * * @param pVM VM handle. */ VMMR3DECL(void) SELMR3DumpGuestGDT(PVM pVM) { DBGFR3Info(pVM, "gdtguest", NULL, NULL); } /** * Dumps the guest LDT * * @param pVM VM handle. */ VMMR3DECL(void) SELMR3DumpGuestLDT(PVM pVM) { DBGFR3Info(pVM, "ldtguest", NULL, NULL); }