VirtualBox

source: vbox/trunk/src/VBox/VMM/PATM/PATMA.h@ 12866

Last change on this file since 12866 was 11920, checked in by vboxsync, 16 years ago

More logging

  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
File size: 8.2 KB
Line 
1/* $Id: PATMA.h 11920 2008-09-01 13:44:18Z vboxsync $ */
2/** @file
3 * PATM macros & definitions (identical to PATMA.mac!!)
4 */
5
6/*
7 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 *
17 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18 * Clara, CA 95054 USA or visit http://www.sun.com if you need
19 * additional information or have any questions.
20 */
21
22#ifndef ___PATMA_H
23#define ___PATMA_H
24
25
26#define PATM_VMFLAGS 0xF1ABCD00
27#ifdef VBOX_WITH_STATISTICS
28#define PATM_ALLPATCHCALLS 0xF1ABCD01
29#define PATM_PERPATCHCALLS 0xF1ABCD02
30#endif
31#define PATM_JUMPDELTA 0xF1ABCD03
32#ifdef VBOX_WITH_STATISTICS
33#define PATM_IRETEFLAGS 0xF1ABCD04
34#define PATM_IRETCS 0xF1ABCD05
35#define PATM_IRETEIP 0xF1ABCD06
36#endif
37#define PATM_FIXUP 0xF1ABCD07
38#define PATM_PENDINGACTION 0xF1ABCD08
39#define PATM_CPUID_STD_PTR 0xF1ABCD09
40#define PATM_CPUID_EXT_PTR 0xF1ABCD0a
41#define PATM_CPUID_DEF_PTR 0xF1ABCD0b
42#define PATM_STACKBASE 0xF1ABCD0c /** Stack to store our private patch return addesses */
43#define PATM_STACKBASE_GUEST 0xF1ABCD0d /** Stack to store guest return addresses */
44#define PATM_STACKPTR 0xF1ABCD0e
45#define PATM_PATCHBASE 0xF1ABCD0f
46#define PATM_INTERRUPTFLAG 0xF1ABCD10
47#define PATM_INHIBITIRQADDR 0xF1ABCD11
48#define PATM_VM_FORCEDACTIONS 0xF1ABCD12
49#define PATM_TEMP_EAX 0xF1ABCD13 /** Location for original EAX register */
50#define PATM_TEMP_ECX 0xF1ABCD14 /** Location for original ECX register */
51#define PATM_TEMP_EDI 0xF1ABCD15 /** Location for original EDI register */
52#define PATM_TEMP_EFLAGS 0xF1ABCD16 /** Location for original eflags */
53#define PATM_TEMP_RESTORE_FLAGS 0xF1ABCD17 /** Which registers to restore */
54#define PATM_CALL_PATCH_TARGET_ADDR 0xF1ABCD18
55#define PATM_CALL_RETURN_ADDR 0xF1ABCD19
56#define PATM_CPUID_CENTAUR_PTR 0xF1ABCD1a
57
58/* Anything larger doesn't require a fixup */
59#define PATM_NO_FIXUP 0xF1ABCE00
60#define PATM_CPUID_STD_MAX 0xF1ABCE00
61#define PATM_CPUID_EXT_MAX 0xF1ABCE01
62#define PATM_RETURNADDR 0xF1ABCE02
63#define PATM_PATCHNEXTBLOCK 0xF1ABCE03
64#define PATM_CALLTARGET 0xF1ABCE04 /** relative call target */
65#define PATM_NEXTINSTRADDR 0xF1ABCE05 /** absolute guest address of the next instruction */
66#define PATM_CURINSTRADDR 0xF1ABCE06 /** absolute guest address of the current instruction */
67#define PATM_LOOKUP_AND_CALL_FUNCTION 0xF1ABCE07 /** Relative address of global PATM lookup and call function. */
68#define PATM_RETURN_FUNCTION 0xF1ABCE08 /** Relative address of global PATM return function. */
69#define PATM_LOOKUP_AND_JUMP_FUNCTION 0xF1ABCE09 /** Relative address of global PATM lookup and jump function. */
70#define PATM_IRET_FUNCTION 0xF1ABCE0A /** Relative address of global PATM iret function. */
71#define PATM_CPUID_CENTAUR_MAX 0xF1ABCE0B
72
73// everything except IOPL, NT, IF, VM, VIF, VIP and RF
74#define PATM_FLAGS_MASK (X86_EFL_CF|X86_EFL_PF|X86_EFL_AF|X86_EFL_ZF|X86_EFL_SF|X86_EFL_TF|X86_EFL_DF|X86_EFL_OF|X86_EFL_AC|X86_EFL_ID)
75
76// currently only IF & IOPL
77#define PATM_VIRTUAL_FLAGS_MASK (X86_EFL_IF|X86_EFL_IOPL)
78
79/* PATM stack size (identical in PATMA.mac!!) */
80#define PATM_STACK_SIZE (PAGE_SIZE)
81#define PATM_STACK_TOTAL_SIZE (2*PATM_STACK_SIZE)
82#define PATM_MAX_STACK (PATM_STACK_SIZE/sizeof(RTRCPTR))
83
84/* Patch Manager pending actions (in GCSTATE). */
85#define PATM_ACTION_LOOKUP_ADDRESS 1
86#define PATM_ACTION_DISPATCH_PENDING_IRQ 2
87#define PATM_ACTION_PENDING_IRQ_AFTER_IRET 3
88#define PATM_ACTION_DO_V86_IRET 4
89#define PATM_ACTION_LOG_IF1 5
90#define PATM_ACTION_LOG_CLI 6
91#define PATM_ACTION_LOG_STI 7
92#define PATM_ACTION_LOG_POPF_IF1 8
93#define PATM_ACTION_LOG_POPF_IF0 9
94#define PATM_ACTION_LOG_PUSHF 10
95#define PATM_ACTION_LOG_IRET 11
96#define PATM_ACTION_LOG_RET 12
97#define PATM_ACTION_LOG_CALL 13
98#define PATM_ACTION_LOG_GATE_ENTRY 14
99
100/* Magic dword found in ecx for patm pending actions. */
101#define PATM_ACTION_MAGIC 0xABCD4321
102
103/** PATM_TEMP_RESTORE_FLAGS */
104#define PATM_RESTORE_EAX RT_BIT(0)
105#define PATM_RESTORE_ECX RT_BIT(1)
106#define PATM_RESTORE_EDI RT_BIT(2)
107
108typedef struct
109{
110 uint8_t *pFunction;
111 uint32_t offJump;
112 uint32_t offRelJump; //used only by loop/loopz/loopnz
113 uint32_t offSizeOverride; //size override byte position
114 uint32_t size;
115 uint32_t nrRelocs;
116 uint32_t uReloc[1];
117} PATCHASMRECORD, *PPATCHASMRECORD;
118
119/* For indirect calls/jump (identical in PATMA.h & PATMA.mac!) */
120/** @note MUST BE A POWER OF TWO! */
121/** @note direct calls have only one lookup slot (PATCHDIRECTJUMPTABLE_SIZE) */
122/** @note Some statistics reveal that:
123 * - call: Windows XP boot -> max 16, 127 replacements
124 * - call: Knoppix 3.7 boot -> max 9
125 * - ret: Knoppix 5.0.1 boot -> max 16, 80000 replacements (3+ million hits)
126 */
127#define PATM_MAX_JUMPTABLE_ENTRIES 16
128typedef struct
129{
130 uint16_t nrSlots;
131 uint16_t ulInsertPos;
132 uint32_t cAddresses;
133 struct
134 {
135 RTRCPTR pInstrGC;
136 RTRCUINTPTR pRelPatchGC; /* relative to patch base */
137 } Slot[1];
138} PATCHJUMPTABLE, *PPATCHJUMPTABLE;
139
140
141__BEGIN_DECLS
142
143extern PATCHASMRECORD PATMCliRecord;
144extern PATCHASMRECORD PATMStiRecord;
145extern PATCHASMRECORD PATMPopf32Record;
146extern PATCHASMRECORD PATMPopf16Record;
147extern PATCHASMRECORD PATMPopf16Record_NoExit;
148extern PATCHASMRECORD PATMPopf32Record_NoExit;
149extern PATCHASMRECORD PATMPushf32Record;
150extern PATCHASMRECORD PATMPushf16Record;
151extern PATCHASMRECORD PATMIretRecord;
152extern PATCHASMRECORD PATMCpuidRecord;
153extern PATCHASMRECORD PATMLoopRecord;
154extern PATCHASMRECORD PATMLoopZRecord;
155extern PATCHASMRECORD PATMLoopNZRecord;
156extern PATCHASMRECORD PATMJEcxRecord;
157extern PATCHASMRECORD PATMIntEntryRecord;
158extern PATCHASMRECORD PATMIntEntryRecordErrorCode;
159extern PATCHASMRECORD PATMTrapEntryRecord;
160extern PATCHASMRECORD PATMTrapEntryRecordErrorCode;
161extern PATCHASMRECORD PATMPushCSRecord;
162
163extern PATCHASMRECORD PATMCheckIFRecord;
164extern PATCHASMRECORD PATMJumpToGuest_IF1Record;
165
166extern PATCHASMRECORD PATMCallRecord;
167extern PATCHASMRECORD PATMCallIndirectRecord;
168extern PATCHASMRECORD PATMRetRecord;
169extern PATCHASMRECORD PATMJumpIndirectRecord;
170
171extern PATCHASMRECORD PATMLookupAndCallRecord;
172extern PATCHASMRECORD PATMRetFunctionRecord;
173extern PATCHASMRECORD PATMLookupAndJumpRecord;
174extern PATCHASMRECORD PATMIretFunctionRecord;
175
176extern PATCHASMRECORD PATMStatsRecord;
177
178extern PATCHASMRECORD PATMSetPIFRecord;
179extern PATCHASMRECORD PATMClearPIFRecord;
180
181extern PATCHASMRECORD PATMSetInhibitIRQRecord;
182extern PATCHASMRECORD PATMClearInhibitIRQFaultIF0Record;
183extern PATCHASMRECORD PATMClearInhibitIRQContIF0Record;
184
185extern PATCHASMRECORD PATMMovFromSSRecord;
186
187extern uint32_t PATMInterruptFlag;
188
189__END_DECLS
190
191#endif
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette