/* $Id: DBGF.cpp 2981 2007-06-01 16:01:28Z vboxsync $ */ /** @file * VMM DBGF - Debugger Facility. */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License as published by the Free Software Foundation, * in version 2 as it comes in the "COPYING" file of the VirtualBox OSE * distribution. VirtualBox OSE is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY of any kind. * * If you received this file as part of a commercial VirtualBox * distribution, then only the terms of your commercial VirtualBox * license agreement apply instead of the previous paragraph. */ /** @page pg_dbgf DBGC - The Debugger Facility * * The purpose of the DBGC is to provide an interface for debuggers to manipulate * the VMM without having to mess up the source code for each of them. The DBGF * is always built in and will always work when a debugger attaches to the VM. * The DBGF provides the basic debugger features, such as halting execution, * handling breakpoints and single step execution. * * The interface is working in a manner similar to the win32, linux and os2 * debugger interfaces. It interface has an asynchronous nature. This comes from * the fact that the VMM and the Debugger are running in different threads. * They are refered to as the "emulation thread" and the "debugger thread", * or as the "ping thread" and the "pong thread, respectivly. (The last set * of names comes from the use of the Ping-Pong synchronization construct from * the RTSem API.) * * * * @section sec_dbgf_scenario Debugger Scenario * * The debugger starts by attaching to the VM. For pratical reasons we limit the * number of concurrently attached debuggers to 1 per VM. The action of attaching * to the VM causes the VM to check and generate debug events. * * The debugger then will wait/poll for debug events and issue commands. * * The waiting and polling is done by the DBGFEventWait() function. It will wait * for the emulation thread to send a ping, thus indicating that there is an * event waiting to be processed. * * An event can be a respons to an command issued previously, the hitting of a * breakpoint, or running into a bad/fatal VMM condition. The debugger now have * the ping and must respond to the event at hand - the VMM is waiting. This * usually means that the user of the debugger must do something, but it doesn't * have to. The debugger is free to call any DBGF function (nearly at least) * while processing the event. * * Typically the user will issue a request for the execution to be resumed, so * the debugger calls DBGFResume() and goes back to waiting/polling for events. * * When the user eventually terminates the debugging session or selects another * VM, the debugger detaches from the VM. This means that breakpoints are disabled * and that the emulation thread no longer polls for debugger commands. * */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_DBGF #include #include #include #include #include "DBGFInternal.h" #include #include #include #include #include #include #include #include #include /******************************************************************************* * Internal Functions * *******************************************************************************/ static int dbgfr3VMMWait(PVM pVM); static int dbgfr3VMMCmd(PVM pVM, DBGFCMD enmCmd, PDBGFCMDDATA pCmdData, bool *pfResumeExecution); /** * Sets the VMM Debug Command variable. * * @returns Previous command. * @param pVM VM Handle. * @param enmCmd The command. */ DECLINLINE(DBGFCMD) dbgfr3SetCmd(PVM pVM, DBGFCMD enmCmd) { DBGFCMD rc; if (enmCmd == DBGFCMD_NO_COMMAND) { Log2(("DBGF: Setting command to %d (DBGFCMD_NO_COMMAND)\n", enmCmd)); rc = (DBGFCMD)ASMAtomicXchgU32((uint32_t volatile *)(void *)&pVM->dbgf.s.enmVMMCmd, enmCmd); VM_FF_CLEAR(pVM, VM_FF_DBGF); } else { Log2(("DBGF: Setting command to %d\n", enmCmd)); AssertMsg(pVM->dbgf.s.enmVMMCmd == DBGFCMD_NO_COMMAND, ("enmCmd=%d enmVMMCmd=%d\n", enmCmd, pVM->dbgf.s.enmVMMCmd)); rc = (DBGFCMD)ASMAtomicXchgU32((uint32_t volatile *)(void *)&pVM->dbgf.s.enmVMMCmd, enmCmd); VM_FF_SET(pVM, VM_FF_DBGF); VMR3NotifyFF(pVM, false /* didn't notify REM */); } return rc; } /** * Initializes the DBGF. * * @returns VBox status code. * @param pVM VM handle. */ DBGFR3DECL(int) DBGFR3Init(PVM pVM) { int rc = dbgfR3InfoInit(pVM); if (VBOX_SUCCESS(rc)) rc = dbgfR3SymInit(pVM); if (VBOX_SUCCESS(rc)) rc = dbgfR3BpInit(pVM); return rc; } /** * Termiantes and cleans up resources allocated by the DBGF. * * @returns VBox status code. * @param pVM VM Handle. */ DBGFR3DECL(int) DBGFR3Term(PVM pVM) { int rc; /* * Send a termination event to any attached debuggers. */ /* wait for any pending events or whatever */ if ( pVM->dbgf.s.fAttached && pVM->dbgf.s.PingPong.enmSpeaker == RTPINGPONGSPEAKER_PONG) { do rc = RTSemPingWait(&pVM->dbgf.s.PingPong, 5000); while (pVM->dbgf.s.fAttached); } /* now, send the event */ if ( pVM->dbgf.s.fAttached && pVM->dbgf.s.PingPong.enmSpeaker != RTPINGPONGSPEAKER_PONG) { pVM->dbgf.s.DbgEvent.enmType = DBGFEVENT_TERMINATING; pVM->dbgf.s.DbgEvent.enmCtx = DBGFEVENTCTX_OTHER; rc = RTSemPing(&pVM->dbgf.s.PingPong); if (VBOX_SUCCESS(rc)) { /* * Waits for the debugger to detach. */ while (pVM->dbgf.s.fAttached) { /* * Wait. */ rc = RTSemPingWait(&pVM->dbgf.s.PingPong, 1000); /* * Process the command. */ DBGFCMDDATA CmdData = pVM->dbgf.s.VMMCmdData; DBGFCMD enmCmd = dbgfr3SetCmd(pVM, DBGFCMD_NO_COMMAND); if (enmCmd != DBGFCMD_NO_COMMAND) { bool fResumeExecution = false; rc = dbgfr3VMMCmd(pVM, enmCmd, &CmdData, &fResumeExecution); if (enmCmd == DBGFCMD_DETACH_DEBUGGER) break; } else if (VBOX_FAILURE(rc)) break; } } } /* * Terminate the other bits. */ dbgfR3InfoTerm(pVM); return VINF_SUCCESS; } /** * Applies relocations to data and code managed by this * component. This function will be called at init and * whenever the VMM need to relocate it self inside the GC. * * @param pVM VM handle. * @param offDelta Relocation delta relative to old location. */ DBGFR3DECL(void) DBGFR3Relocate(PVM pVM, RTGCINTPTR offDelta) { } /** * Waits a little while for a debuggger to attach. * * @returns True is a debugger have attached. * @param pVM VM handle. * @param enmEvent Event. */ bool dbgfR3WaitForAttach(PVM pVM, DBGFEVENTTYPE enmEvent) { /* * First a message. */ #ifndef __L4__ RTStrmPrintf(g_pStdErr, "DBGF: No debugger attached, waiting 15 seconds for one to attach (event=%d)\n", enmEvent); RTStrmFlush(g_pStdErr); # ifdef DEBUG_sandervl int cWait = 10; # else int cWait = 150; # endif while (cWait > 0) { RTThreadSleep(100); if (pVM->dbgf.s.fAttached) { RTStrmPrintf(g_pStdErr, "Attached!\n"); RTStrmFlush(g_pStdErr); return true; } /* next */ if (!(cWait % 10)) { RTStrmPrintf(g_pStdErr, "%d.", cWait / 10); RTStrmFlush(g_pStdErr); } cWait--; } #endif RTStrmPrintf(g_pStdErr, "Stopping the VM!\n"); RTStrmFlush(g_pStdErr); return false; } /** * Forced action callback. * The VMM will call this from it's main loop when VM_FF_DBGF is set. * * The function checks and executes pending commands from the debugger. * * @returns VINF_SUCCESS normally. * @returns VERR_DBGF_RAISE_FATAL_ERROR to pretend a fatal error happend. * @param pVM VM Handle. */ DBGFR3DECL(int) DBGFR3VMMForcedAction(PVM pVM) { /* * Clear the FF DBGF request flag. */ Assert(pVM->fForcedActions & VM_FF_DBGF); VM_FF_CLEAR(pVM, VM_FF_DBGF); /* * Commands? */ int rc = VINF_SUCCESS; if (pVM->dbgf.s.enmVMMCmd != DBGFCMD_NO_COMMAND) { /** @todo stupid GDT/LDT sync hack. go away! */ SELMR3UpdateFromCPUM(pVM); /* * Process the command. */ bool fResumeExecution; DBGFCMDDATA CmdData = pVM->dbgf.s.VMMCmdData; DBGFCMD enmCmd = dbgfr3SetCmd(pVM, DBGFCMD_NO_COMMAND); rc = dbgfr3VMMCmd(pVM, enmCmd, &CmdData, &fResumeExecution); if (!fResumeExecution) rc = dbgfr3VMMWait(pVM); } return rc; } /** * Flag whether the event implies that we're stopped in the hypervisor code * and have to block certain operations. * * @param pVM The VM handle. * @param enmEvent The event. */ static void dbgfR3EventSetStoppedInHyperFlag(PVM pVM, DBGFEVENTTYPE enmEvent) { switch (enmEvent) { case DBGFEVENT_STEPPED_HYPER: case DBGFEVENT_ASSERTION_HYPER: case DBGFEVENT_BREAKPOINT_HYPER: pVM->dbgf.s.fStoppedInHyper = true; break; default: pVM->dbgf.s.fStoppedInHyper = false; break; } } /** * Try determin the event context. * * @returns debug event context. * @param pVM The VM handle. */ static DBGFEVENTCTX dbgfR3FigureEventCtx(PVM pVM) { switch (EMGetState(pVM)) { case EMSTATE_RAW: case EMSTATE_DEBUG_GUEST_RAW: return DBGFEVENTCTX_RAW; case EMSTATE_REM: case EMSTATE_DEBUG_GUEST_REM: return DBGFEVENTCTX_REM; case EMSTATE_DEBUG_HYPER: case EMSTATE_GURU_MEDITATION: return DBGFEVENTCTX_HYPER; default: return DBGFEVENTCTX_OTHER; } } /** * The common event prologue code. * It will set the 'stopped-in-hyper' flag, make sure someone's attach, * and perhaps process any high priority pending actions (none yet). * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent The event to be sent. */ static int dbgfR3EventPrologue(PVM pVM, DBGFEVENTTYPE enmEvent) { /* * Check if a debugger is attached. */ if ( !pVM->dbgf.s.fAttached && !dbgfR3WaitForAttach(pVM, enmEvent)) { Log(("DBGFR3VMMEventSrc: enmEvent=%d - debugger not attached\n", enmEvent)); return VERR_DBGF_NOT_ATTACHED; } /* * Sync back the state from the REM. */ dbgfR3EventSetStoppedInHyperFlag(pVM, enmEvent); if (!pVM->dbgf.s.fStoppedInHyper) REMR3StateUpdate(pVM); /* * Look thru pending commands and finish those which make sense now. */ /** @todo Process/purge pending commands. */ //int rc = DBGFR3VMMForcedAction(pVM); return VINF_SUCCESS; } /** * Sends the event in the event buffer. * * @returns VBox status code. * @param pVM The VM handle. */ static int dbgfR3SendEvent(PVM pVM) { int rc = RTSemPing(&pVM->dbgf.s.PingPong); if (VBOX_SUCCESS(rc)) rc = dbgfr3VMMWait(pVM); pVM->dbgf.s.fStoppedInHyper = false; /** @todo sync VMM -> REM after exitting the debugger. everything may change while in the debugger! */ return rc; } /** * Send a generic debugger event which takes no data. * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent The event to send. */ DBGFR3DECL(int) DBGFR3Event(PVM pVM, DBGFEVENTTYPE enmEvent) { int rc = dbgfR3EventPrologue(pVM, enmEvent); if (VBOX_FAILURE(rc)) return rc; /* * Send the event and process the reply communication. */ pVM->dbgf.s.DbgEvent.enmType = enmEvent; pVM->dbgf.s.DbgEvent.enmCtx = dbgfR3FigureEventCtx(pVM); return dbgfR3SendEvent(pVM); } /** * Send a debugger event which takes the full source file location. * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent The event to send. * @param pszFile Source file. * @param uLine Line number in source file. * @param pszFunction Function name. * @param pszFormat Message which accompanies the event. * @param ... Message arguments. */ DBGFR3DECL(int) DBGFR3EventSrc(PVM pVM, DBGFEVENTTYPE enmEvent, const char *pszFile, unsigned uLine, const char *pszFunction, const char *pszFormat, ...) { va_list args; va_start(args, pszFormat); int rc = DBGFR3EventSrcV(pVM, enmEvent, pszFile, uLine, pszFunction, pszFormat, args); va_end(args); return rc; } /** * Send a debugger event which takes the full source file location. * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent The event to send. * @param pszFile Source file. * @param uLine Line number in source file. * @param pszFunction Function name. * @param pszFormat Message which accompanies the event. * @param args Message arguments. */ DBGFR3DECL(int) DBGFR3EventSrcV(PVM pVM, DBGFEVENTTYPE enmEvent, const char *pszFile, unsigned uLine, const char *pszFunction, const char *pszFormat, va_list args) { int rc = dbgfR3EventPrologue(pVM, enmEvent); if (VBOX_FAILURE(rc)) return rc; /* * Format the message. */ char *pszMessage = NULL; char szMessage[8192]; if (pszFormat && *pszFormat) { pszMessage = &szMessage[0]; RTStrPrintfV(szMessage, sizeof(szMessage), pszFormat, args); } /* * Send the event and process the reply communication. */ pVM->dbgf.s.DbgEvent.enmType = enmEvent; pVM->dbgf.s.DbgEvent.enmCtx = dbgfR3FigureEventCtx(pVM); pVM->dbgf.s.DbgEvent.u.Src.pszFile = pszFile; pVM->dbgf.s.DbgEvent.u.Src.uLine = uLine; pVM->dbgf.s.DbgEvent.u.Src.pszFunction = pszFunction; pVM->dbgf.s.DbgEvent.u.Src.pszMessage = pszMessage; return dbgfR3SendEvent(pVM); } /** * Send a debugger event which takes the two assertion messages. * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent The event to send. * @param pszMsg1 First assertion message. * @param pszMsg2 Second assertion message. */ DBGFR3DECL(int) DBGFR3EventAssertion(PVM pVM, DBGFEVENTTYPE enmEvent, const char *pszMsg1, const char *pszMsg2) { int rc = dbgfR3EventPrologue(pVM, enmEvent); if (VBOX_FAILURE(rc)) return rc; /* * Send the event and process the reply communication. */ pVM->dbgf.s.DbgEvent.enmType = enmEvent; pVM->dbgf.s.DbgEvent.enmCtx = dbgfR3FigureEventCtx(pVM); pVM->dbgf.s.DbgEvent.u.Assert.pszMsg1 = pszMsg1; pVM->dbgf.s.DbgEvent.u.Assert.pszMsg2 = pszMsg2; return dbgfR3SendEvent(pVM); } /** * Breakpoint was hit somewhere. * Figure out which breakpoint it is and notify the debugger. * * @returns VBox status. * @param pVM The VM handle. * @param enmEvent DBGFEVENT_BREAKPOINT_HYPER or DBGFEVENT_BREAKPOINT. */ DBGFR3DECL(int) DBGFR3EventBreakpoint(PVM pVM, DBGFEVENTTYPE enmEvent) { int rc = dbgfR3EventPrologue(pVM, enmEvent); if (VBOX_FAILURE(rc)) return rc; /* * Send the event and process the reply communication. */ pVM->dbgf.s.DbgEvent.enmType = enmEvent; RTUINT iBp = pVM->dbgf.s.DbgEvent.u.Bp.iBp = pVM->dbgf.s.iActiveBp; pVM->dbgf.s.iActiveBp = ~0U; if (iBp != ~0U) pVM->dbgf.s.DbgEvent.enmCtx = DBGFEVENTCTX_RAW; else { /* REM breakpoints has be been searched for. */ #if 0 /** @todo get flat PC api! */ uint32_t eip = CPUMGetGuestEIP(pVM); #else PCPUMCTX pCtx; CPUMQueryGuestCtxPtr(pVM, &pCtx); uint32_t eip = pCtx->eip + pCtx->csHid.u32Base; #endif for (iBp = 0; iBp < ELEMENTS(pVM->dbgf.s.aBreakpoints); iBp++) if ( pVM->dbgf.s.aBreakpoints[iBp].enmType == DBGFBPTYPE_REM && pVM->dbgf.s.aBreakpoints[iBp].GCPtr == eip) { pVM->dbgf.s.DbgEvent.u.Bp.iBp = iBp; break; } AssertMsg(pVM->dbgf.s.DbgEvent.u.Bp.iBp != ~0U, ("eip=%08x\n", eip)); pVM->dbgf.s.DbgEvent.enmCtx = DBGFEVENTCTX_REM; } return dbgfR3SendEvent(pVM); } /** * Waits for the debugger to respond. * * @returns VBox status. (clearify) * @param pVM VM handle. */ static int dbgfr3VMMWait(PVM pVM) { LogFlow(("dbgfr3VMMWait:\n")); /** @todo stupid GDT/LDT sync hack. go away! */ SELMR3UpdateFromCPUM(pVM); int rcRet = VINF_SUCCESS; /* * Waits for the debugger to reply (i.e. issue an command). */ for (;;) { /* * Wait. */ for (;;) { int rc = RTSemPingWait(&pVM->dbgf.s.PingPong, 250); if (VBOX_SUCCESS(rc)) break; if (rc != VERR_TIMEOUT) { LogFlow(("dbgfr3VMMWait: returns %Vrc\n", rc)); return rc; } if (VM_FF_ISSET(pVM, VM_FF_REQUEST)) { LogFlow(("dbgfr3VMMWait: Processes requests...\n")); rc = VMR3ReqProcess(pVM); LogFlow(("dbgfr3VMMWait: VMR3ReqProcess -> %Vrc rcRet=%Vrc\n", rc, rcRet)); if (rc >= VINF_EM_FIRST && rc <= VINF_EM_LAST) { switch (rc) { case VINF_EM_DBG_BREAKPOINT: case VINF_EM_DBG_STEPPED: case VINF_EM_DBG_STEP: case VINF_EM_DBG_STOP: AssertMsgFailed(("rc=%Vrc\n", rc)); break; /* return straight away */ case VINF_EM_TERMINATE: case VINF_EM_OFF: LogFlow(("dbgfr3VMMWait: returns %Vrc\n", rc)); return rc; /* remember return code. */ default: AssertReleaseMsgFailed(("rc=%Vrc is not in the switch!\n", rc)); case VINF_EM_RESET: case VINF_EM_SUSPEND: case VINF_EM_HALT: case VINF_EM_RESUME: case VINF_EM_RESCHEDULE: case VINF_EM_RESCHEDULE_REM: case VINF_EM_RESCHEDULE_RAW: if (rc < rcRet || rcRet == VINF_SUCCESS) rcRet = rc; break; } } else if (VBOX_FAILURE(rc)) { LogFlow(("dbgfr3VMMWait: returns %Vrc\n", rc)); return rc; } } } /* * Process the command. */ bool fResumeExecution; DBGFCMDDATA CmdData = pVM->dbgf.s.VMMCmdData; DBGFCMD enmCmd = dbgfr3SetCmd(pVM, DBGFCMD_NO_COMMAND); int rc = dbgfr3VMMCmd(pVM, enmCmd, &CmdData, &fResumeExecution); if (fResumeExecution) { if (VBOX_FAILURE(rc)) rcRet = rc; else if ( rc >= VINF_EM_FIRST && rc <= VINF_EM_LAST && (rc < rcRet || rcRet == VINF_SUCCESS)) rcRet = rc; LogFlow(("dbgfr3VMMWait: returns %Vrc\n", rcRet)); return rcRet; } } } /** * Executes command from debugger. * The caller is responsible for waiting or resuming execution based on the * value returned in the *pfResumeExecution indicator. * * @returns VBox status. (clearify!) * @param pVM VM Handle. * @param enmCmd The command in question. * @param pCmdData Pointer to the command data. * @param pfResumeExecution Where to store the resume execution / continue waiting indicator. */ static int dbgfr3VMMCmd(PVM pVM, DBGFCMD enmCmd, PDBGFCMDDATA pCmdData, bool *pfResumeExecution) { bool fSendEvent; bool fResume; int rc = VINF_SUCCESS; switch (enmCmd) { /* * Halt is answered by an event say that we've halted. */ case DBGFCMD_HALT: { pVM->dbgf.s.DbgEvent.enmType = DBGFEVENT_HALT_DONE; pVM->dbgf.s.DbgEvent.enmCtx = dbgfR3FigureEventCtx(pVM); fSendEvent = true; fResume = false; break; } /* * Resume is not answered we'll just resume execution. */ case DBGFCMD_GO: { fSendEvent = false; fResume = true; break; } /** @todo implement (and define) the rest of the commands. */ /* * Disable breakpoints and stuff. * Send an everythings cool event to the debugger thread and resume execution. */ case DBGFCMD_DETACH_DEBUGGER: { pVM->dbgf.s.DbgEvent.enmType = DBGFEVENT_DETACH_DONE; pVM->dbgf.s.DbgEvent.enmCtx = DBGFEVENTCTX_OTHER; VM_FF_CLEAR(pVM, VM_FF_DBGF); pVM->dbgf.s.fAttached = false; fSendEvent = true; fResume = true; break; } /* * Single step, with trace into. */ case DBGFCMD_SINGLE_STEP: { Log2(("Single step\n")); rc = VINF_EM_DBG_STEP; pVM->dbgf.s.fSingleSteppingRaw = true; fSendEvent = false; fResume = true; break; } /* * Default is to send an invalid command event. */ default: { pVM->dbgf.s.DbgEvent.enmType = DBGFEVENT_INVALID_COMMAND; pVM->dbgf.s.DbgEvent.enmCtx = dbgfR3FigureEventCtx(pVM); fSendEvent = true; fResume = false; break; } } /* * Send pending event. */ if (fSendEvent) { Log2(("DBGF: Emulation thread: sending event %d\n", pVM->dbgf.s.DbgEvent.enmType)); int rc2 = RTSemPing(&pVM->dbgf.s.PingPong); if (VBOX_FAILURE(rc2)) { AssertRC(rc2); *pfResumeExecution = true; return rc2; } } /* * Return. */ *pfResumeExecution = fResume; return rc; } /** * Attaches a debugger to the specified VM. * * Only one debugger at a time. * * @returns VBox status code. * @param pVM VM Handle. */ DBGFR3DECL(int) DBGFR3Attach(PVM pVM) { /* * Check if already attached. */ if (pVM->dbgf.s.fAttached) { AssertMsgFailed(("Already attached\n")); return VERR_DBGF_ALREADY_ATTACHED; } /* * Create the Ping-Pong structure. */ int rc = RTSemPingPongInit(&pVM->dbgf.s.PingPong); if (rc) return rc; /* * Set the attached flag. */ pVM->dbgf.s.fAttached = true; return VINF_SUCCESS; } /** * Detaches a debugger from the specified VM. * * Caller must be attached to the VM. * * @returns VBox status code. * @param pVM VM Handle. */ DBGFR3DECL(int) DBGFR3Detach(PVM pVM) { /* * Check if attached. */ if (!pVM->dbgf.s.fAttached) { AssertMsgFailed(("Not attached to VM!\n")); return VERR_DBGF_NOT_ATTACHED; } /* * Send detach command. */ if (pVM->dbgf.s.PingPong.enmSpeaker == RTPINGPONGSPEAKER_PONG) { dbgfr3SetCmd(pVM, DBGFCMD_DETACH_DEBUGGER); int rc = RTSemPong(&pVM->dbgf.s.PingPong); if (VBOX_FAILURE(rc)) { AssertMsgFailed(("Failed to signal emulation thread. rc=%d\n", rc)); return rc; } } else dbgfr3SetCmd(pVM, DBGFCMD_DETACH_DEBUGGER); /* * Wait for the ok event. */ PCDBGFEVENT pEvent; int rc = DBGFR3EventWait(pVM, RT_INDEFINITE_WAIT, &pEvent); if (VBOX_FAILURE(rc)) { AssertMsgFailed(("Wait on detach command failed, rc=%d\n", rc)); return rc; } /* * Destroy the ping-pong construct and return. */ pVM->dbgf.s.fAttached = false; RTThreadSleep(10); rc = RTSemPingPongDestroy(&pVM->dbgf.s.PingPong); AssertRC(rc); return VINF_SUCCESS; } /** * Wait for a debug event. * * @returns VBox status. Will not return VBOX_INTERRUPTED. * @param pVM VM handle. * @param cMillies Number of millies to wait. * @param ppEvent Where to store the event pointer. */ DBGFR3DECL(int) DBGFR3EventWait(PVM pVM, unsigned cMillies, PCDBGFEVENT *ppEvent) { /* * Check state. */ if (!pVM->dbgf.s.fAttached) { AssertMsgFailed(("Not attached to VM!\n")); return VERR_DBGF_NOT_ATTACHED; } *ppEvent = NULL; /* * Wait. */ int rc = RTSemPongWait(&pVM->dbgf.s.PingPong, cMillies); if (VBOX_SUCCESS(rc)) { *ppEvent = &pVM->dbgf.s.DbgEvent; Log2(("DBGF: Debugger thread: receiving event %d\n", (*ppEvent)->enmType)); return VINF_SUCCESS; } return rc; } /** * Halts VM execution. * * After calling this the VM isn't actually halted till an DBGFEVENT_HALT_DONE * arrives. Until that time it's not possible to issue any new commands. * * @returns VBox status. * @param pVM VM handle. */ DBGFR3DECL(int) DBGFR3Halt(PVM pVM) { /* * Check state. */ if (!pVM->dbgf.s.fAttached) { AssertMsgFailed(("Not attached to VM!\n")); return VERR_DBGF_NOT_ATTACHED; } if ( pVM->dbgf.s.PingPong.enmSpeaker == RTPINGPONGSPEAKER_PONG || pVM->dbgf.s.PingPong.enmSpeaker == RTPINGPONGSPEAKER_PONG_SIGNALED) return VWRN_DBGF_ALREADY_HALTED; /* * Send command. */ dbgfr3SetCmd(pVM, DBGFCMD_HALT); return VINF_SUCCESS; } /** * Checks if the VM is halted by the debugger. * * @returns True if halted. * @returns False if not halted. * @param pVM VM handle. */ DBGFR3DECL(bool) DBGFR3IsHalted(PVM pVM) { AssertMsg(pVM->dbgf.s.fAttached, ("Not attached to VM!\n")); RTPINGPONGSPEAKER enmSpeaker = pVM->dbgf.s.PingPong.enmSpeaker; return pVM->dbgf.s.fAttached && ( enmSpeaker == RTPINGPONGSPEAKER_PONG_SIGNALED || enmSpeaker == RTPINGPONGSPEAKER_PONG); } /** * Checks if the the debugger can wait for events or not. * * This function is only used by lazy, multiplexing debuggers. :-) * * @returns True if waitable. * @returns False if not waitable. * @param pVM VM handle. */ DBGFR3DECL(bool) DBGFR3CanWait(PVM pVM) { AssertMsg(pVM->dbgf.s.fAttached, ("Not attached to VM!\n")); RTPINGPONGSPEAKER enmSpeaker = pVM->dbgf.s.PingPong.enmSpeaker; return pVM->dbgf.s.fAttached && ( enmSpeaker == RTPINGPONGSPEAKER_PING || enmSpeaker == RTPINGPONGSPEAKER_PING_SIGNALED || enmSpeaker == RTPINGPONGSPEAKER_PONG_SIGNALED); } /** * Resumes VM execution. * * There is no receipt event on this command. * * @returns VBox status. * @param pVM VM handle. */ DBGFR3DECL(int) DBGFR3Resume(PVM pVM) { /* * Check state. */ if (!pVM->dbgf.s.fAttached) { AssertMsgFailed(("Not attached to VM!\n")); return VERR_DBGF_NOT_ATTACHED; } if (pVM->dbgf.s.PingPong.enmSpeaker != RTPINGPONGSPEAKER_PONG) { AssertMsgFailed(("Speaking out of turn!\n")); return VERR_SEM_OUT_OF_TURN; } /* * Send the ping back to the emulation thread telling it to run. */ dbgfr3SetCmd(pVM, DBGFCMD_GO); int rc = RTSemPong(&pVM->dbgf.s.PingPong); AssertRC(rc); return rc; } /** * Step Into. * * A single step event is generated from this command. * The current implementation is not reliable, so don't rely on the event comming. * * @returns VBox status. * @param pVM VM handle. */ DBGFR3DECL(int) DBGFR3Step(PVM pVM) { /* * Check state. */ if (!pVM->dbgf.s.fAttached) { AssertMsgFailed(("Not attached to VM!\n")); return VERR_DBGF_NOT_ATTACHED; } if (pVM->dbgf.s.PingPong.enmSpeaker != RTPINGPONGSPEAKER_PONG) { AssertMsgFailed(("Speaking out of turn!\n")); return VERR_SEM_OUT_OF_TURN; } /* * Send the ping back to the emulation thread telling it to run. */ dbgfr3SetCmd(pVM, DBGFCMD_SINGLE_STEP); int rc = RTSemPong(&pVM->dbgf.s.PingPong); AssertRC(rc); return rc; } /** * Call this to single step rawmode or recompiled mode. * * You must pass down the return code to the EM loop! That's * where the actual single stepping take place (at least in the * current implementation). * * @returns VINF_EM_DBG_STEP * @thread EMT */ DBGFR3DECL(int) DBGFR3PrgStep(PVM pVM) { VM_ASSERT_EMT(pVM); pVM->dbgf.s.fSingleSteppingRaw = true; return VINF_EM_DBG_STEP; }