sched-posix.cpp@ 62514

Last change on this file since 62514 was 61751, checked in by vboxsync, 9 years ago
fixed small memory leaks on certain hosts (Solaris) when using pthread_*attr functions
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 30.6 KB

Line
1	/* $Id: sched-posix.cpp 61751 2016-06-17 15:05:08Z vboxsync $ */
2	/** @file
3	* IPRT - Scheduling, POSIX.
4	*/
5
6	/*
7	* Copyright (C) 2006-2016 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* The contents of this file may alternatively be used under the terms
18	* of the Common Development and Distribution License Version 1.0
19	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	* VirtualBox OSE distribution, in which case the provisions of the
21	* CDDL are applicable instead of those of the GPL.
22	*
23	* You may elect to license modified versions of this file under the
24	* terms and conditions of either the GPL or the CDDL or both.
25	*/
26
27	/*
28	* !WARNING!
29	*
30	* When talking about lowering and raising priority, we do NOT refer to
31	* the common direction priority values takes on unix systems (lower means
32	* higher). So, when we raise the priority of a linux thread the nice
33	* value will decrease, and when we lower the priority the nice value
34	* will increase. Confusing, right?
35	*
36	* !WARNING!
37	*/
38
39
40
41	/** @def THREAD_LOGGING
42	* Be very careful with enabling this, it may cause deadlocks when combined
43	* with the 'thread' logging prefix.
44	*/
45	#ifdef DOXYGEN_RUNNING
46	#define THREAD_LOGGING
47	#endif
48
49
50	/*********************************************************************************************************************************
51	* Header Files *
52	*********************************************************************************************************************************/
53	#define LOG_GROUP RTLOGGROUP_THREAD
54	#include <errno.h>
55	#include <pthread.h>
56	#include <sched.h>
57	#include <unistd.h>
58	#include <sys/resource.h>
59
60	#include <iprt/thread.h>
61	#include <iprt/process.h>
62	#include <iprt/semaphore.h>
63	#include <iprt/string.h>
64	#include <iprt/assert.h>
65	#include <iprt/log.h>
66	#include <iprt/err.h>
67	#include "internal/sched.h"
68	#include "internal/thread.h"
69
70
71	/*********************************************************************************************************************************
72	* Structures and Typedefs *
73	*********************************************************************************************************************************/
74
75	/** Array scheduler attributes corresponding to each of the thread types. */
76	typedef struct PROCPRIORITYTYPE
77	{
78	/** For sanity include the array index. */
79	RTTHREADTYPE enmType;
80	/** The thread priority or nice delta - depends on which priority type. */
81	int iPriority;
82	} PROCPRIORITYTYPE;
83
84
85	/**
86	* Configuration of one priority.
87	*/
88	typedef struct
89	{
90	/** The priority. */
91	RTPROCPRIORITY enmPriority;
92	/** The name of this priority. */
93	const char *pszName;
94	/** The process nice value. */
95	int iNice;
96	/** The delta applied to the iPriority value. */
97	int iDelta;
98	/** Array scheduler attributes corresponding to each of the thread types. */
99	const PROCPRIORITYTYPE *paTypes;
100	} PROCPRIORITY;
101
102
103	/**
104	* Saved priority settings
105	*/
106	typedef struct
107	{
108	/** Process priority. */
109	int iPriority;
110	/** Process level. */
111	struct sched_param SchedParam;
112	/** Process level. */
113	int iPolicy;
114	/** pthread level. */
115	struct sched_param PthreadSchedParam;
116	/** pthread level. */
117	int iPthreadPolicy;
118	} SAVEDPRIORITY, *PSAVEDPRIORITY;
119
120
121	/*********************************************************************************************************************************
122	* Global Variables *
123	*********************************************************************************************************************************/
124	/**
125	* Thread level priorities based on a 0..31 priority range
126	* as specified as the minimum for SCHED_RR/FIFO. FreeBSD
127	* seems to be using this (needs more research to be
128	* certain).
129	*/
130	static const PROCPRIORITYTYPE g_aTypesThread[RTTHREADTYPE_END] =
131	{
132	{ RTTHREADTYPE_INVALID, -999999999 },
133	{ RTTHREADTYPE_INFREQUENT_POLLER, 5 },
134	{ RTTHREADTYPE_MAIN_HEAVY_WORKER, 12 },
135	{ RTTHREADTYPE_EMULATION, 14 },
136	{ RTTHREADTYPE_DEFAULT, 15 },
137	{ RTTHREADTYPE_GUI, 16 },
138	{ RTTHREADTYPE_MAIN_WORKER, 18 },
139	{ RTTHREADTYPE_VRDP_IO, 24 },
140	{ RTTHREADTYPE_DEBUGGER, 28 },
141	{ RTTHREADTYPE_MSG_PUMP, 29 },
142	{ RTTHREADTYPE_IO, 30 },
143	{ RTTHREADTYPE_TIMER, 31 }
144	};
145
146	static const PROCPRIORITYTYPE g_aTypesThreadFlat[RTTHREADTYPE_END] =
147	{
148	{ RTTHREADTYPE_INVALID, ~0 },
149	{ RTTHREADTYPE_INFREQUENT_POLLER, 15 },
150	{ RTTHREADTYPE_MAIN_HEAVY_WORKER, 15 },
151	{ RTTHREADTYPE_EMULATION, 15 },
152	{ RTTHREADTYPE_DEFAULT, 15 },
153	{ RTTHREADTYPE_GUI, 15 },
154	{ RTTHREADTYPE_MAIN_WORKER, 15 },
155	{ RTTHREADTYPE_VRDP_IO, 15 },
156	{ RTTHREADTYPE_DEBUGGER, 15 },
157	{ RTTHREADTYPE_MSG_PUMP, 15 },
158	{ RTTHREADTYPE_IO, 15 },
159	{ RTTHREADTYPE_TIMER, 15 }
160	};
161
162	/**
163	* Process and thread level priority, full access at thread level.
164	*/
165	static const PROCPRIORITY g_aProcessAndThread[] =
166	{
167	{ RTPROCPRIORITY_FLAT, "Flat", 0, 0, g_aTypesThreadFlat },
168	{ RTPROCPRIORITY_LOW, "Low", 9, 0, g_aTypesThread },
169	{ RTPROCPRIORITY_LOW, "Low", 11, 0, g_aTypesThread },
170	{ RTPROCPRIORITY_LOW, "Low", 15, 0, g_aTypesThread },
171	{ RTPROCPRIORITY_LOW, "Low", 17, 0, g_aTypesThread },
172	{ RTPROCPRIORITY_LOW, "Low", 19, 0, g_aTypesThread },
173	{ RTPROCPRIORITY_LOW, "Low", 7, 0, g_aTypesThread },
174	{ RTPROCPRIORITY_LOW, "Low", 5, 0, g_aTypesThread },
175	{ RTPROCPRIORITY_LOW, "Low", 3, 0, g_aTypesThread },
176	{ RTPROCPRIORITY_LOW, "Low", 1, 0, g_aTypesThread },
177	{ RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesThread },
178	{ RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesThreadFlat },
179	{ RTPROCPRIORITY_HIGH, "High", -9, 0, g_aTypesThread },
180	{ RTPROCPRIORITY_HIGH, "High", -7, 0, g_aTypesThread },
181	{ RTPROCPRIORITY_HIGH, "High", -5, 0, g_aTypesThread },
182	{ RTPROCPRIORITY_HIGH, "High", -3, 0, g_aTypesThread },
183	{ RTPROCPRIORITY_HIGH, "High", -1, 0, g_aTypesThread },
184	{ RTPROCPRIORITY_HIGH, "High", -9, 0, g_aTypesThreadFlat },
185	{ RTPROCPRIORITY_HIGH, "High", -1, 0, g_aTypesThreadFlat }
186	};
187
188	/**
189	* Deltas for a process in which we are not restricted
190	* to only be lowering the priority.
191	*/
192	static const PROCPRIORITYTYPE g_aTypesUnixFree[RTTHREADTYPE_END] =
193	{
194	{ RTTHREADTYPE_INVALID, -999999999 },
195	{ RTTHREADTYPE_INFREQUENT_POLLER, +3 },
196	{ RTTHREADTYPE_MAIN_HEAVY_WORKER, +2 },
197	{ RTTHREADTYPE_EMULATION, +1 },
198	{ RTTHREADTYPE_DEFAULT, 0 },
199	{ RTTHREADTYPE_GUI, 0 },
200	{ RTTHREADTYPE_MAIN_WORKER, 0 },
201	{ RTTHREADTYPE_VRDP_IO, -1 },
202	{ RTTHREADTYPE_DEBUGGER, -1 },
203	{ RTTHREADTYPE_MSG_PUMP, -2 },
204	{ RTTHREADTYPE_IO, -3 },
205	{ RTTHREADTYPE_TIMER, -4 }
206	};
207
208	/**
209	* Deltas for a process in which we are restricted
210	* to only be lowering the priority.
211	*/
212	static const PROCPRIORITYTYPE g_aTypesUnixRestricted[RTTHREADTYPE_END] =
213	{
214	{ RTTHREADTYPE_INVALID, -999999999 },
215	{ RTTHREADTYPE_INFREQUENT_POLLER, +3 },
216	{ RTTHREADTYPE_MAIN_HEAVY_WORKER, +2 },
217	{ RTTHREADTYPE_EMULATION, +1 },
218	{ RTTHREADTYPE_DEFAULT, 0 },
219	{ RTTHREADTYPE_GUI, 0 },
220	{ RTTHREADTYPE_MAIN_WORKER, 0 },
221	{ RTTHREADTYPE_VRDP_IO, 0 },
222	{ RTTHREADTYPE_DEBUGGER, 0 },
223	{ RTTHREADTYPE_MSG_PUMP, 0 },
224	{ RTTHREADTYPE_IO, 0 },
225	{ RTTHREADTYPE_TIMER, 0 }
226	};
227
228	/**
229	* Deltas for a process in which we are restricted
230	* to only be lowering the priority.
231	*/
232	static const PROCPRIORITYTYPE g_aTypesUnixFlat[RTTHREADTYPE_END] =
233	{
234	{ RTTHREADTYPE_INVALID, -999999999 },
235	{ RTTHREADTYPE_INFREQUENT_POLLER, 0 },
236	{ RTTHREADTYPE_MAIN_HEAVY_WORKER, 0 },
237	{ RTTHREADTYPE_EMULATION, 0 },
238	{ RTTHREADTYPE_DEFAULT, 0 },
239	{ RTTHREADTYPE_GUI, 0 },
240	{ RTTHREADTYPE_MAIN_WORKER, 0 },
241	{ RTTHREADTYPE_VRDP_IO, 0 },
242	{ RTTHREADTYPE_DEBUGGER, 0 },
243	{ RTTHREADTYPE_MSG_PUMP, 0 },
244	{ RTTHREADTYPE_IO, 0 },
245	{ RTTHREADTYPE_TIMER, 0 }
246	};
247
248	/**
249	* Process and thread level priority, full access at thread level.
250	*/
251	static const PROCPRIORITY g_aUnixConfigs[] =
252	{
253	{ RTPROCPRIORITY_FLAT, "Flat", 0, 0, g_aTypesUnixFlat },
254	{ RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixFree },
255	{ RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixFlat },
256	{ RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixFree },
257	{ RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixFlat },
258	{ RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixFree },
259	{ RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixFlat },
260	{ RTPROCPRIORITY_LOW, "Low", 19, 19, g_aTypesUnixFlat },
261	{ RTPROCPRIORITY_LOW, "Low", 9, 9, g_aTypesUnixRestricted },
262	{ RTPROCPRIORITY_LOW, "Low", 15, 15, g_aTypesUnixRestricted },
263	{ RTPROCPRIORITY_LOW, "Low", 17, 17, g_aTypesUnixRestricted },
264	{ RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixFree },
265	{ RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixRestricted },
266	{ RTPROCPRIORITY_NORMAL, "Normal", 0, 0, g_aTypesUnixFlat },
267	{ RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixFree },
268	{ RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixFree },
269	{ RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixFree },
270	{ RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixFree },
271	{ RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixFree },
272	{ RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixRestricted },
273	{ RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixRestricted },
274	{ RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixRestricted },
275	{ RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixRestricted },
276	{ RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixRestricted },
277	{ RTPROCPRIORITY_HIGH, "High", -9, -9, g_aTypesUnixFlat },
278	{ RTPROCPRIORITY_HIGH, "High", -7, -7, g_aTypesUnixFlat },
279	{ RTPROCPRIORITY_HIGH, "High", -5, -5, g_aTypesUnixFlat },
280	{ RTPROCPRIORITY_HIGH, "High", -3, -3, g_aTypesUnixFlat },
281	{ RTPROCPRIORITY_HIGH, "High", -1, -1, g_aTypesUnixFlat }
282	};
283
284	/**
285	* The dynamic default priority configuration.
286	*
287	* This will be recalulated at runtime depending on what the
288	* system allow us to do and what the current priority is.
289	*/
290	static PROCPRIORITY g_aDefaultPriority =
291	{
292	RTPROCPRIORITY_LOW, "Default", 0, 0, g_aTypesUnixRestricted
293	};
294
295	/** Pointer to the current priority configuration. */
296	static const PROCPRIORITY *g_pProcessPriority = &g_aDefaultPriority;
297
298
299	/** Set to what kind of scheduling priority support the host
300	* OS seems to be offering. Determined at runtime.
301	*/
302	static enum
303	{
304	OSPRIOSUP_UNDETERMINED = 0,
305	/** An excellent combination of process and thread level
306	* I.e. setpriority() works on process level, one have to be supervisor
307	* to raise priority as is the custom in unix. While pthread_setschedparam()
308	* works on thread level and we can raise the priority just like we want.
309	*
310	* I think this is what FreeBSD offers. (It is certainly analogous to what
311	* NT offers if you wondered.) Linux on the other hand doesn't provide this
312	* for processes with SCHED_OTHER policy, and I'm not sure if we want to
313	* play around with using the real-time SCHED_RR and SCHED_FIFO which would
314	* require special privileges anyway.
315	*/
316	OSPRIOSUP_PROCESS_AND_THREAD_LEVEL,
317	/** A rough thread level priority only.
318	* setpriority() is the only real game in town, and it works on thread level.
319	*/
320	OSPRIOSUP_THREAD_LEVEL
321	} volatile g_enmOsPrioSup = OSPRIOSUP_UNDETERMINED;
322
323	/** Set if we figure we have nice capability, meaning we can use setpriority
324	* to raise the priority. */
325	bool g_fCanNice = false;
326
327
328	/*********************************************************************************************************************************
329	* Internal Functions *
330	*********************************************************************************************************************************/
331
332
333	/**
334	* Saves all the scheduling attributes we can think of.
335	*/
336	static void rtSchedNativeSave(PSAVEDPRIORITY pSave)
337	{
338	memset(pSave, 0xff, sizeof(*pSave));
339
340	errno = 0;
341	pSave->iPriority = getpriority(PRIO_PROCESS, 0 /* current process */);
342	Assert(errno == 0);
343
344	errno = 0;
345	sched_getparam(0 /* current process */, &pSave->SchedParam);
346	Assert(errno == 0);
347
348	errno = 0;
349	pSave->iPolicy = sched_getscheduler(0 /* current process */);
350	Assert(errno == 0);
351
352	int rc = pthread_getschedparam(pthread_self(), &pSave->iPthreadPolicy, &pSave->PthreadSchedParam);
353	Assert(rc == 0); NOREF(rc);
354	}
355
356
357	/**
358	* Restores scheduling attributes.
359	* Most of this won't work right, but anyway...
360	*/
361	static void rtSchedNativeRestore(PSAVEDPRIORITY pSave)
362	{
363	setpriority(PRIO_PROCESS, 0, pSave->iPriority);
364	sched_setscheduler(0, pSave->iPolicy, &pSave->SchedParam);
365	sched_setparam(0, &pSave->SchedParam);
366	pthread_setschedparam(pthread_self(), pSave->iPthreadPolicy, &pSave->PthreadSchedParam);
367	}
368
369
370	/**
371	* Starts a worker thread and wait for it to complete.
372	* We cannot use RTThreadCreate since we're already owner of the RW lock.
373	*/
374	static int rtSchedCreateThread(void (pfnThread)(void pvArg), void pvArg)
375	{
376	/*
377	* Setup thread attributes.
378	*/
379	pthread_attr_t ThreadAttr;
380	int rc = pthread_attr_init(&ThreadAttr);
381	if (!rc)
382	{
383	rc = pthread_attr_setdetachstate(&ThreadAttr, PTHREAD_CREATE_JOINABLE);
384	if (!rc)
385	{
386	rc = pthread_attr_setstacksize(&ThreadAttr, 128*1024);
387	if (!rc)
388	{
389	/*
390	* Create the thread.
391	*/
392	pthread_t Thread;
393	rc = pthread_create(&Thread, &ThreadAttr, pfnThread, pvArg);
394	if (!rc)
395	{
396	pthread_attr_destroy(&ThreadAttr);
397	/*
398	* Wait for the thread to finish.
399	*/
400	void pvRet = (void )-1;
401	do
402	{
403	rc = pthread_join(Thread, &pvRet);
404	} while (rc == EINTR);
405	if (rc)
406	return RTErrConvertFromErrno(rc);
407	return (int)(uintptr_t)pvRet;
408	}
409	}
410	}
411	pthread_attr_destroy(&ThreadAttr);
412	}
413	return RTErrConvertFromErrno(rc);
414	}
415
416
417	static void rtSchedDumpPriority(void)
418	{
419	#ifdef THREAD_LOGGING
420	Log(("Priority: g_fCanNice=%d g_enmOsPrioSup=%d\n", g_fCanNice, g_enmOsPrioSup));
421	Log(("Priority: enmPriority=%d \"%s\" iNice=%d iDelta=%d\n",
422	g_pProcessPriority->enmPriority,
423	g_pProcessPriority->pszName,
424	g_pProcessPriority->iNice,
425	g_pProcessPriority->iDelta));
426	Log(("Priority: %2d INFREQUENT_POLLER = %d\n", RTTHREADTYPE_INFREQUENT_POLLER, g_pProcessPriority->paTypes[RTTHREADTYPE_INFREQUENT_POLLER].iPriority));
427	Log(("Priority: %2d MAIN_HEAVY_WORKER = %d\n", RTTHREADTYPE_MAIN_HEAVY_WORKER, g_pProcessPriority->paTypes[RTTHREADTYPE_MAIN_HEAVY_WORKER].iPriority));
428	Log(("Priority: %2d EMULATION = %d\n", RTTHREADTYPE_EMULATION , g_pProcessPriority->paTypes[RTTHREADTYPE_EMULATION ].iPriority));
429	Log(("Priority: %2d DEFAULT = %d\n", RTTHREADTYPE_DEFAULT , g_pProcessPriority->paTypes[RTTHREADTYPE_DEFAULT ].iPriority));
430	Log(("Priority: %2d GUI = %d\n", RTTHREADTYPE_GUI , g_pProcessPriority->paTypes[RTTHREADTYPE_GUI ].iPriority));
431	Log(("Priority: %2d MAIN_WORKER = %d\n", RTTHREADTYPE_MAIN_WORKER , g_pProcessPriority->paTypes[RTTHREADTYPE_MAIN_WORKER ].iPriority));
432	Log(("Priority: %2d VRDP_IO = %d\n", RTTHREADTYPE_VRDP_IO , g_pProcessPriority->paTypes[RTTHREADTYPE_VRDP_IO ].iPriority));
433	Log(("Priority: %2d DEBUGGER = %d\n", RTTHREADTYPE_DEBUGGER , g_pProcessPriority->paTypes[RTTHREADTYPE_DEBUGGER ].iPriority));
434	Log(("Priority: %2d MSG_PUMP = %d\n", RTTHREADTYPE_MSG_PUMP , g_pProcessPriority->paTypes[RTTHREADTYPE_MSG_PUMP ].iPriority));
435	Log(("Priority: %2d IO = %d\n", RTTHREADTYPE_IO , g_pProcessPriority->paTypes[RTTHREADTYPE_IO ].iPriority));
436	Log(("Priority: %2d TIMER = %d\n", RTTHREADTYPE_TIMER , g_pProcessPriority->paTypes[RTTHREADTYPE_TIMER ].iPriority));
437	#endif
438	}
439
440
441	/**
442	* The prober thread.
443	* We don't want to mess with the priority of the calling thread.
444	*
445	* @remark This is pretty presumptive stuff, but if it works on Linux and
446	* FreeBSD it does what I want.
447	*/
448	static void rtSchedNativeProberThread(void pvUser)
449	{
450	SAVEDPRIORITY SavedPriority;
451	rtSchedNativeSave(&SavedPriority);
452
453	/*
454	* Let's first try and see what we get on a thread level.
455	*/
456	int iMax = sched_get_priority_max(SavedPriority.iPthreadPolicy);
457	int iMin = sched_get_priority_min(SavedPriority.iPthreadPolicy);
458	if (iMax - iMin >= 32)
459	{
460	pthread_t Self = pthread_self();
461	int i = iMin;
462	while (i <= iMax)
463	{
464	struct sched_param SchedParam = SavedPriority.PthreadSchedParam;
465	SchedParam.sched_priority = i;
466	if (pthread_setschedparam(Self, SavedPriority.iPthreadPolicy, &SchedParam))
467	break;
468	i++;
469	}
470	if (i == iMax)
471	g_enmOsPrioSup = OSPRIOSUP_PROCESS_AND_THREAD_LEVEL;
472	}
473
474	/*
475	* Ok, we didn't have the good stuff, so let's fall back on the unix stuff.
476	*/
477	if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED)
478	g_enmOsPrioSup = OSPRIOSUP_THREAD_LEVEL;
479
480	/*
481	* Check if we can get higher priority (typically only root can do this).
482	* (Won't work right if our priority is -19 to start with, but what the heck.)
483	*
484	* We assume that the unix priority is -19 to 19. I know there are defines
485	* for this, but I don't remember which and if I'm awake enough to make sense
486	* of them from any SuS spec.
487	*/
488	int iStart = getpriority(PRIO_PROCESS, 0);
489	int i = iStart;
490	while (i-- > -19)
491	{
492	if (setpriority(PRIO_PROCESS, 0, i))
493	break;
494	}
495	if (getpriority(PRIO_PROCESS, 0) != iStart)
496	g_fCanNice = true;
497	else
498	g_fCanNice = false;
499
500	/* done */
501	rtSchedNativeRestore(&SavedPriority);
502	return (void *)VINF_SUCCESS;
503	}
504
505
506	/**
507	* Calculate the scheduling properties for all the threads in the default
508	* process priority, assuming the current thread have the type enmType.
509	*
510	* @returns iprt status code.
511	* @param enmType The thread type to be assumed for the current thread.
512	*/
513	DECLHIDDEN(int) rtSchedNativeCalcDefaultPriority(RTTHREADTYPE enmType)
514	{
515	Assert(enmType > RTTHREADTYPE_INVALID && enmType < RTTHREADTYPE_END);
516
517	/*
518	* First figure out what's supported by the OS.
519	*/
520	if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED)
521	{
522	int iPriority = getpriority(PRIO_PROCESS, 0);
523	int rc = rtSchedCreateThread(rtSchedNativeProberThread, NULL);
524	if (RT_FAILURE(rc))
525	return rc;
526	if (g_enmOsPrioSup == OSPRIOSUP_UNDETERMINED)
527	g_enmOsPrioSup = OSPRIOSUP_THREAD_LEVEL;
528	Assert(getpriority(PRIO_PROCESS, 0) == iPriority); NOREF(iPriority);
529	}
530
531	/*
532	* Now let's see what we can do...
533	*/
534	int iPriority = getpriority(PRIO_PROCESS, 0);
535	switch (g_enmOsPrioSup)
536	{
537	case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL:
538	{
539	g_aDefaultPriority.iNice = iPriority;
540	g_aDefaultPriority.iDelta = 0;
541	g_aDefaultPriority.paTypes = g_aTypesThread;
542	Assert(enmType == g_aDefaultPriority.paTypes[enmType].enmType);
543	break;
544	}
545
546	case OSPRIOSUP_THREAD_LEVEL:
547	{
548	if (g_fCanNice)
549	g_aDefaultPriority.paTypes = g_aTypesUnixFree;
550	else
551	g_aDefaultPriority.paTypes = g_aTypesUnixRestricted;
552	Assert(enmType == g_aDefaultPriority.paTypes[enmType].enmType);
553	g_aDefaultPriority.iNice = iPriority - g_aDefaultPriority.paTypes[enmType].iPriority;
554	g_aDefaultPriority.iDelta = g_aDefaultPriority.iNice;
555	break;
556	}
557
558	default:
559	AssertFailed();
560	break;
561	}
562	rtSchedDumpPriority();
563	return VINF_SUCCESS;
564	}
565
566
567	/**
568	* The validator thread.
569	* We don't want to mess with the priority of the calling thread.
570	*
571	* @remark This is pretty presumptive stuff, but if it works on Linux and
572	* FreeBSD it does what I want.
573	*/
574	static void rtSchedNativeValidatorThread(void pvUser)
575	{
576	const PROCPRIORITY pCfg = (const PROCPRIORITY )pvUser;
577	SAVEDPRIORITY SavedPriority;
578	rtSchedNativeSave(&SavedPriority);
579
580	int rc = VINF_SUCCESS;
581	switch (g_enmOsPrioSup)
582	{
583	/*
584	* Try set the specified process priority and then try
585	* out all the thread priorities which are used.
586	*/
587	case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL:
588	{
589	if (!setpriority(PRIO_PROCESS, 0, pCfg->iNice))
590	{
591	int iMin = sched_get_priority_min(SavedPriority.iPolicy);
592	pthread_t Self = pthread_self();
593	for (int i = RTTHREADTYPE_INVALID + 1; i < RTTHREADTYPE_END; i++)
594	{
595	struct sched_param SchedParam = SavedPriority.PthreadSchedParam;
596	SchedParam.sched_priority = pCfg->paTypes[i].iPriority
597	+ pCfg->iDelta + iMin;
598	rc = pthread_setschedparam(Self, SavedPriority.iPthreadPolicy, &SchedParam);
599	if (rc)
600	{
601	rc = RTErrConvertFromErrno(rc);
602	break;
603	}
604	}
605	}
606	else
607	rc = RTErrConvertFromErrno(errno);
608	break;
609	}
610
611	/*
612	* Try out the priorities from the top and down.
613	*/
614	case OSPRIOSUP_THREAD_LEVEL:
615	{
616	int i = RTTHREADTYPE_END;
617	while (--i > RTTHREADTYPE_INVALID)
618	{
619	int iPriority = pCfg->paTypes[i].iPriority + pCfg->iDelta;
620	if (setpriority(PRIO_PROCESS, 0, iPriority))
621	{
622	rc = RTErrConvertFromErrno(errno);
623	break;
624	}
625	}
626	break;
627	}
628
629	default:
630	AssertFailed();
631	break;
632	}
633
634	/* done */
635	rtSchedNativeRestore(&SavedPriority);
636	return (void *)rc;
637	}
638
639
640	/**
641	* Validates and sets the process priority.
642	* This will check that all rtThreadNativeSetPriority() will success for all the
643	* thread types when applied to the current thread.
644	*
645	* @returns iprt status code.
646	* @param enmPriority The priority to validate and set.
647	*/
648	DECLHIDDEN(int) rtProcNativeSetPriority(RTPROCPRIORITY enmPriority)
649	{
650	Assert(enmPriority > RTPROCPRIORITY_INVALID && enmPriority < RTPROCPRIORITY_LAST);
651
652	int rc = VINF_SUCCESS;
653	if (enmPriority == RTPROCPRIORITY_DEFAULT)
654	g_pProcessPriority = &g_aDefaultPriority;
655	else
656	{
657	/*
658	* Select the array to search.
659	*/
660	const PROCPRIORITY *pa;
661	unsigned c;
662	switch (g_enmOsPrioSup)
663	{
664	case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL:
665	pa = g_aProcessAndThread;
666	c = RT_ELEMENTS(g_aProcessAndThread);
667	break;
668	case OSPRIOSUP_THREAD_LEVEL:
669	pa = g_aUnixConfigs;
670	c = RT_ELEMENTS(g_aUnixConfigs);
671	break;
672	default:
673	pa = NULL;
674	c = 0;
675	break;
676	}
677
678	/*
679	* Search the array.
680	*/
681	rc = VERR_FILE_NOT_FOUND;
682	unsigned i;
683	for (i = 0; i < c; i++)
684	{
685	if (pa[i].enmPriority == enmPriority)
686	{
687	/*
688	* Validate it.
689	*/
690	int iPriority = getpriority(PRIO_PROCESS, 0);
691	int rc3 = rtSchedCreateThread(rtSchedNativeValidatorThread, (void *)&pa[i]);
692	Assert(getpriority(PRIO_PROCESS, 0) == iPriority); NOREF(iPriority);
693	if (RT_SUCCESS(rc))
694	rc = rc3;
695	if (RT_SUCCESS(rc))
696	break;
697	}
698	}
699
700	/*
701	* Did we get lucky?
702	* If so update process priority and globals.
703	*/
704	if (RT_SUCCESS(rc))
705	{
706	switch (g_enmOsPrioSup)
707	{
708	case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL:
709	if (setpriority(PRIO_PROCESS, 0, pa[i].iNice))
710	{
711	rc = RTErrConvertFromErrno(errno);
712	AssertMsgFailed(("setpriority(,,%d) -> errno=%d rc=%Rrc\n", pa[i].iNice, errno, rc));
713	}
714	break;
715
716	default:
717	break;
718	}
719
720	if (RT_SUCCESS(rc))
721	g_pProcessPriority = &pa[i];
722	}
723	}
724
725	#ifdef THREAD_LOGGING
726	LogFlow(("rtProcNativeSetPriority: returns %Rrc enmPriority=%d\n", rc, enmPriority));
727	rtSchedDumpPriority();
728	#endif
729	return rc;
730	}
731
732
733	/**
734	* Sets the priority of the thread according to the thread type
735	* and current process priority.
736	*
737	* The RTTHREADINT::enmType member has not yet been updated and will be updated by
738	* the caller on a successful return.
739	*
740	* @returns iprt status code.
741	* @param Thread The thread in question.
742	* @param enmType The thread type.
743	*/
744	DECLHIDDEN(int) rtThreadNativeSetPriority(PRTTHREADINT pThread, RTTHREADTYPE enmType)
745	{
746	Assert(enmType > RTTHREADTYPE_INVALID && enmType < RTTHREADTYPE_END);
747	Assert(enmType == g_pProcessPriority->paTypes[enmType].enmType);
748	Assert((pthread_t)pThread->Core.Key == pthread_self());
749
750	int rc = VINF_SUCCESS;
751	switch (g_enmOsPrioSup)
752	{
753	case OSPRIOSUP_PROCESS_AND_THREAD_LEVEL:
754	{
755	struct sched_param SchedParam = {-9999999};
756	int iPolicy = -7777777;
757	pthread_t Self = pthread_self();
758	rc = pthread_getschedparam(Self, &iPolicy, &SchedParam);
759	if (!rc)
760	{
761	SchedParam.sched_priority = g_pProcessPriority->paTypes[enmType].iPriority
762	+ g_pProcessPriority->iDelta
763	+ sched_get_priority_min(iPolicy);
764	rc = pthread_setschedparam(Self, iPolicy, &SchedParam);
765	if (!rc)
766	{
767	#ifdef THREAD_LOGGING
768	Log(("rtThreadNativeSetPriority: Thread=%p enmType=%d iPolicy=%d sched_priority=%d pid=%d\n",
769	pThread->Core.Key, enmType, iPolicy, SchedParam.sched_priority, getpid()));
770	#endif
771	break;
772	}
773	}
774
775	int rcNative = rc;
776	rc = RTErrConvertFromErrno(rc);
777	AssertMsgFailed(("pthread_[gs]etschedparam(%p, %d, {%d}) -> rcNative=%d rc=%Rrc\n",
778	(void *)Self, iPolicy, SchedParam.sched_priority, rcNative, rc)); NOREF(rcNative);
779	break;
780	}
781
782	case OSPRIOSUP_THREAD_LEVEL:
783	{
784	int iPriority = g_pProcessPriority->paTypes[enmType].iPriority + g_pProcessPriority->iDelta;
785	if (!setpriority(PRIO_PROCESS, 0, iPriority))
786	{
787	AssertMsg(iPriority == getpriority(PRIO_PROCESS, 0), ("iPriority=%d getpriority()=%d\n", iPriority, getpriority(PRIO_PROCESS, 0)));
788	#ifdef THREAD_LOGGING
789	Log(("rtThreadNativeSetPriority: Thread=%p enmType=%d iPriority=%d pid=%d\n", pThread->Core.Key, enmType, iPriority, getpid()));
790	#endif
791	}
792	else
793	{
794	#if 0
795	rc = RTErrConvertFromErrno(errno);
796	AssertMsgFailed(("setpriority(,, %d) -> errno=%d rc=%Rrc\n", iPriority, errno, rc));
797	#else
798	/** @todo
799	* Just keep quiet about failures now - we'll fail here because we're not
800	* allowed to raise our own priority. This is a problem when starting the
801	* threads with higher priority from EMT (i.e. most threads it starts).
802	* This is apparently inherited from the parent in some cases and not
803	* in other cases. I guess this would come down to which kind of pthread
804	* implementation is actually in use, and how many sensible patches which
805	* are installed.
806	* I need to find a system where this problem shows up in order to come up
807	* with a proper fix. There's an pthread_create attribute for not inheriting
808	* scheduler stuff I think...
809	*/
810	rc = VINF_SUCCESS;
811	#endif
812	}
813	break;
814	}
815
816	/*
817	* Any thread created before we determine the default config, remains unchanged!
818	* The prober thread above is one of those.
819	*/
820	default:
821	break;
822	}
823
824	return rc;
825	}
826

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Runtime/r3/posix/sched-posix.cpp@ 62514

Download in other formats: