/* $Id: crc32.cpp 1 1970-01-01 00:00:00Z vboxsync $ */ /** @file * InnoTek Portable Runtime - CRC32. */ /* * Copyright (C) 2006 InnoTek Systemberatung GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License as published by the Free Software Foundation, * in version 2 as it comes in the "COPYING" file of the VirtualBox OSE * distribution. VirtualBox OSE is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY of any kind. * * If you received this file as part of a commercial VirtualBox * distribution, then only the terms of your commercial VirtualBox * license agreement apply instead of the previous paragraph. * * -------------------------------------------------------------------- * * This code is based on: * * CRC32 code derived from work by Gary S. Brown. * * COPYRIGHT (C) 1986 Gary S. Brown. You may use this program, or * code or tables extracted from it, as desired without restriction. * * First, the polynomial itself and its table of feedback terms. The * polynomial is * X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 * * Note that we take it "backwards" and put the highest-order term in * the lowest-order bit. The X^32 term is "implied"; the LSB is the * X^31 term, etc. The X^0 term (usually shown as "+1") results in * the MSB being 1 * * Note that the usual hardware shift register implementation, which * is what we're using (we're merely optimizing it by doing eight-bit * chunks at a time) shifts bits into the lowest-order term. In our * implementation, that means shifting towards the right. Why do we * do it this way? Because the calculated CRC must be transmitted in * order from highest-order term to lowest-order term. UARTs transmit * characters in order from LSB to MSB. By storing the CRC this way * we hand it to the UART in the order low-byte to high-byte; the UART * sends each low-bit to hight-bit; and the result is transmission bit * by bit from highest- to lowest-order term without requiring any bit * shuffling on our part. Reception works similarly * * The feedback terms table consists of 256, 32-bit entries. Notes * * The table can be generated at runtime if desired; code to do so * is shown later. It might not be obvious, but the feedback * terms simply represent the results of eight shift/xor opera * tions for all combinations of data and CRC register values * * The values must be right-shifted by eight bits by the "updcrc * logic; the shift must be unsigned (bring in zeroes). On some * hardware you could probably optimize the shift in assembler by * using byte-swap instructions * polynomial $edb88320 * */ #if 0 #include __FBSDID("$FreeBSD: src/sys/libkern/crc32.c,v 1.2 2003/06/11 05:23:04 obrien Exp $"); #include #include #else # include #endif #if 0 uint32_t crc32_tab[] = { #else /** CRC32 feedback table. */ uint32_t au32CRC32[] = { #endif 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d }; #if 0 uint32_t crc32(const void *buf, size_t size) { const uint8_t *p; uint32_t crc; p = buf; crc = ~0U; while (size--) crc = crc32_tab[(crc ^ *p++) & 0xFF] ^ (crc >> 8); return crc ^ ~0U; } #endif /** * Calculate CRC32 for a memory block. * * @returns CRC32 for the memory block. * @param pv Pointer to the memory block. * @param cb Size of the memory block in bytes. */ RTDECL(uint32_t) RTCrc32(const void *pv, size_t cb) { const uint8_t *pu8 = (const uint8_t *)pv; uint32_t uCRC32 = ~0U; while (cb--) uCRC32 = au32CRC32[(uCRC32 ^ *pu8++) & 0xff] ^ (uCRC32 >> 8); return uCRC32 ^ ~0U; } /** * Start a multiblock CRC32 calculation. * * @returns Start CRC32. */ RTDECL(uint32_t) RTCrc32Start(void) { return ~0U; } /** * Processes a multiblock of a CRC32 calculation. * * @returns Intermediate CRC32 value. * @param uCRC32 Current CRC32 intermediate value. * @param pv The data block to process. * @param cb The size of the data block in bytes. */ RTDECL(uint32_t) RTCrc32Process(uint32_t uCRC32, const void *pv, size_t cb) { const uint8_t *pu8 = (const uint8_t *)pv; while (cb--) uCRC32 = au32CRC32[(uCRC32 ^ *pu8++) & 0xff] ^ (uCRC32 >> 8); return uCRC32; } /** * Complete a multiblock CRC32 calculation. * * @returns CRC32 value. * @param uCRC32 Current CRC32 intermediate value. */ RTDECL(uint32_t) RTCrc32Finish(uint32_t uCRC32) { return uCRC32 ^ ~0U; }