source: vbox/trunk/src/VBox/Main/xml/Settings.cpp@ 94369

/* $Id: Settings.cpp 93561 2022-02-03 07:02:29Z vboxsync $ */
/** @file
 * Settings File Manipulation API.
 *
 * Two classes, MainConfigFile and MachineConfigFile, represent the VirtualBox.xml and
 * machine XML files. They share a common ancestor class, ConfigFileBase, which shares
 * functionality such as talking to the XML back-end classes and settings version management.
 *
 * The code can read all VirtualBox settings files version 1.3 and higher. That version was
 * written by VirtualBox 2.0. It can write settings version 1.7 (used by VirtualBox 2.2 and
 * 3.0) and 1.9 (used by VirtualBox 3.1) and newer ones obviously.
 *
 * The settings versions enum is defined in src/VBox/Main/idl/VirtualBox.xidl. To introduce
 * a new settings version (should be necessary at most once per VirtualBox major release,
 * if at all), add a new SettingsVersion value to that enum and grep for the previously
 * highest value to see which code in here needs adjusting.
 *
 * Certainly ConfigFileBase::ConfigFileBase() will. Change VBOX_XML_VERSION below as well.
 * VBOX_XML_VERSION does not have to be changed if the settings for a default VM do not
 * touch newly introduced attributes or tags. It has the benefit that older VirtualBox
 * versions do not trigger their "newer" code path.
 *
 * Once a new settings version has been added, these are the rules for introducing a new
 * setting: If an XML element or attribute or value is introduced that was not present in
 * previous versions, then settings version checks need to be introduced. See the
 * SettingsVersion enumeration in src/VBox/Main/idl/VirtualBox.xidl for details about which
 * version was used when.
 *
 * The settings versions checks are necessary because since version 3.1, VirtualBox no longer
 * automatically converts XML settings files but only if necessary, that is, if settings are
 * present that the old format does not support. If we write an element or attribute to a
 * settings file of an older version, then an old VirtualBox (before 3.1) will attempt to
 * validate it with XML schema, and that will certainly fail.
 *
 * So, to introduce a new setting:
 *
 *   1) Make sure the constructor of corresponding settings structure has a proper default.
 *
 *   2) In the settings reader method, try to read the setting; if it's there, great, if not,
 *      the default value will have been set by the constructor. The rule is to be tolerant
 *      here.
 *
 *   3) In MachineConfigFile::bumpSettingsVersionIfNeeded(), check if the new setting has
 *      a non-default value (i.e. that differs from the constructor). If so, bump the
 *      settings version to the current version so the settings writer (4) can write out
 *      the non-default value properly.
 *
 *      So far a corresponding method for MainConfigFile has not been necessary since there
 *      have been no incompatible changes yet.
 *
 *   4) In the settings writer method, write the setting _only_ if the current settings
 *      version (stored in m->sv) is high enough. That is, for VirtualBox 4.0, write it
 *      only if (m->sv >= SettingsVersion_v1_11).
 *
 *   5) You _must_ update xml/VirtualBox-settings.xsd to contain the new tags and attributes.
 *      Check that settings file from before and after your change are validating properly.
 *      Use "kmk testvalidsettings", it should not find any files which don't validate.
 */

/*
 * Copyright (C) 2007-2022 Oracle Corporation
 *
 * This file is part of VirtualBox Open Source Edition (OSE), as
 * available from http://www.virtualbox.org. This file is free software;
 * you can redistribute it and/or modify it under the terms of the GNU
 * General Public License (GPL) as published by the Free Software
 * Foundation, in version 2 as it comes in the "COPYING" file of the
 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
 */

#define LOG_GROUP LOG_GROUP_MAIN
#include "VBox/com/string.h"
#include "VBox/settings.h"
#include <iprt/base64.h>
#include <iprt/cpp/lock.h>
#include <iprt/cpp/xml.h>
#include <iprt/ctype.h>
#include <iprt/err.h>
#include <iprt/file.h>
#include <iprt/ldr.h>
#include <iprt/process.h>
#include <iprt/stream.h>
#include <iprt/uri.h>

// generated header
#include "SchemaDefs.h"

#include "HashedPw.h"
#include "LoggingNew.h"

using namespace com;
using namespace settings;

////////////////////////////////////////////////////////////////////////////////
//
// Defines
//
////////////////////////////////////////////////////////////////////////////////

/** VirtualBox XML settings namespace */
#define VBOX_XML_NAMESPACE      "http://www.virtualbox.org/"

/** VirtualBox XML schema location (relative URI) */
#define VBOX_XML_SCHEMA "VirtualBox-settings.xsd"

/** VirtualBox XML settings version number substring ("x.y")  */
#define VBOX_XML_VERSION        "1.12"

/** VirtualBox OVF settings import default version number substring ("x.y").
 *
 * Think twice before changing this, as all VirtualBox versions before 5.1
 * wrote the settings version when exporting, but totally ignored it on
 * importing (while it should have been a mandatory attribute), so 3rd party
 * software out there creates OVF files with the VirtualBox specific settings
 * but lacking the version attribute. This shouldn't happen any more, but
 * breaking existing OVF files isn't nice. */
#define VBOX_XML_IMPORT_VERSION "1.15"

/** VirtualBox XML settings version platform substring */
#if defined (RT_OS_DARWIN)
#   define VBOX_XML_PLATFORM     "macosx"
#elif defined (RT_OS_FREEBSD)
#   define VBOX_XML_PLATFORM     "freebsd"
#elif defined (RT_OS_LINUX)
#   define VBOX_XML_PLATFORM     "linux"
#elif defined (RT_OS_NETBSD)
#   define VBOX_XML_PLATFORM     "netbsd"
#elif defined (RT_OS_OPENBSD)
#   define VBOX_XML_PLATFORM     "openbsd"
#elif defined (RT_OS_OS2)
#   define VBOX_XML_PLATFORM     "os2"
#elif defined (RT_OS_SOLARIS)
#   define VBOX_XML_PLATFORM     "solaris"
#elif defined (RT_OS_WINDOWS)
#   define VBOX_XML_PLATFORM     "windows"
#else
#   error Unsupported platform!
#endif

/** VirtualBox XML settings full version string ("x.y-platform") */
#define VBOX_XML_VERSION_FULL   VBOX_XML_VERSION "-" VBOX_XML_PLATFORM

/** VirtualBox OVF import default settings full version string ("x.y-platform") */
#define VBOX_XML_IMPORT_VERSION_FULL   VBOX_XML_IMPORT_VERSION "-" VBOX_XML_PLATFORM

////////////////////////////////////////////////////////////////////////////////
//
// Internal data
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Opaque data structore for ConfigFileBase (only declared
 * in header, defined only here).
 */

struct ConfigFileBase::Data
{
    Data()
        : pDoc(NULL),
          pelmRoot(NULL),
          sv(SettingsVersion_Null),
          svRead(SettingsVersion_Null)
    {}

    ~Data()
    {
        cleanup();
    }

    RTCString               strFilename;
    bool                    fFileExists;

    xml::Document           *pDoc;
    xml::ElementNode        *pelmRoot;

    com::Utf8Str            strSettingsVersionFull;     // e.g. "1.7-linux"
    SettingsVersion_T       sv;                         // e.g. SettingsVersion_v1_7

    SettingsVersion_T       svRead;                     // settings version that the original file had when it was read,
                                                        // or SettingsVersion_Null if none

    void copyFrom(const Data &d)
    {
        strFilename = d.strFilename;
        fFileExists = d.fFileExists;
        strSettingsVersionFull = d.strSettingsVersionFull;
        sv = d.sv;
        svRead = d.svRead;
    }

    void cleanup()
    {
        if (pDoc)
        {
            delete pDoc;
            pDoc = NULL;
            pelmRoot = NULL;
        }
    }
};

/**
 * Private exception class (not in the header file) that makes
 * throwing xml::LogicError instances easier. That class is public
 * and should be caught by client code.
 */
class settings::ConfigFileError : public xml::LogicError
{
public:
    ConfigFileError(const ConfigFileBase *file,
                    const xml::Node *pNode,
                    const char *pcszFormat, ...)
        : xml::LogicError()
    {
        va_list args;
        va_start(args, pcszFormat);
        Utf8Str strWhat(pcszFormat, args);
        va_end(args);

        Utf8Str strLine;
        if (pNode)
            strLine = Utf8StrFmt(" (line %RU32)", pNode->getLineNumber());

        const char *pcsz = strLine.c_str();
        Utf8StrFmt str(N_("Error in %s%s -- %s"),
                       file->m->strFilename.c_str(),
                       (pcsz) ? pcsz : "",
                       strWhat.c_str());

        setWhat(str.c_str());
    }
};

////////////////////////////////////////////////////////////////////////////////
//
// ConfigFileBase
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Constructor. Allocates the XML internals, parses the XML file if
 * pstrFilename is != NULL and reads the settings version from it.
 * @param pstrFilename
 */
ConfigFileBase::ConfigFileBase(const com::Utf8Str *pstrFilename)
    : m(new Data)
{
    m->fFileExists = false;

    if (pstrFilename)
    {
        try
        {
            // reading existing settings file:
            m->strFilename = *pstrFilename;

            xml::XmlFileParser parser;
            m->pDoc = new xml::Document;
            parser.read(*pstrFilename,
                        *m->pDoc);

            m->fFileExists = true;

            m->pelmRoot = m->pDoc->getRootElement();
            if (!m->pelmRoot || !m->pelmRoot->nameEquals("VirtualBox"))
                throw ConfigFileError(this, m->pelmRoot, N_("Root element in VirtualBox settings files must be \"VirtualBox\""));

            if (!(m->pelmRoot->getAttributeValue("version", m->strSettingsVersionFull)))
                throw ConfigFileError(this, m->pelmRoot, N_("Required VirtualBox/@version attribute is missing"));

            LogRel(("Loading settings file \"%s\" with version \"%s\"\n", m->strFilename.c_str(), m->strSettingsVersionFull.c_str()));

            m->sv = parseVersion(m->strSettingsVersionFull, m->pelmRoot);

            // remember the settings version we read in case it gets upgraded later,
            // so we know when to make backups
            m->svRead = m->sv;
        }
        catch(...)
        {
            /*
             * The destructor is not called when an exception is thrown in the constructor,
             * so we have to do the cleanup here.
             */
            delete m;
            m = NULL;
            throw;
        }
    }
    else
    {
        // creating new settings file:
        m->strSettingsVersionFull = VBOX_XML_VERSION_FULL;
        m->sv = SettingsVersion_v1_12;
    }
}

ConfigFileBase::ConfigFileBase(const ConfigFileBase &other)
    : m(new Data)
{
    copyBaseFrom(other);
    m->strFilename = "";
    m->fFileExists = false;
}

/**
 * Clean up.
 */
ConfigFileBase::~ConfigFileBase()
{
    if (m)
    {
        delete m;
        m = NULL;
    }
}

/**
 * Helper function to convert a MediaType enum value into string from.
 * @param t
 */
/*static*/
const char *ConfigFileBase::stringifyMediaType(MediaType t)
{
    switch (t)
    {
        case HardDisk:
            return "hard disk";
        case DVDImage:
            return "DVD";
        case FloppyImage:
            return "floppy";
        default:
            AssertMsgFailed(("media type %d\n", t));
            return "UNKNOWN";
    }
}

/**
 * Helper function that parses a full version number.
 *
 * Allow future versions but fail if file is older than 1.6. Throws on errors.
 * @returns settings version
 * @param strVersion
 * @param pElm
 */
SettingsVersion_T ConfigFileBase::parseVersion(const Utf8Str &strVersion, const xml::ElementNode *pElm)
{
    SettingsVersion_T sv = SettingsVersion_Null;
    if (strVersion.length() > 3)
    {
        const char *pcsz = strVersion.c_str();

        uint32_t uMajor = 0;
        char ch;
        while (   (ch = *pcsz)
               && RT_C_IS_DIGIT(ch) )
        {
            uMajor *= 10;
            uMajor += (uint32_t)(ch - '0');
            ++pcsz;
        }

        uint32_t uMinor = 0;
        if (ch == '.')
        {
            pcsz++;
            while (   (ch = *pcsz)
                   && RT_C_IS_DIGIT(ch))
            {
                uMinor *= 10;
                uMinor += (ULONG)(ch - '0');
                ++pcsz;
            }
        }

        if (uMajor == 1)
        {
            if (uMinor == 3)
                sv = SettingsVersion_v1_3;
            else if (uMinor == 4)
                sv = SettingsVersion_v1_4;
            else if (uMinor == 5)
                sv = SettingsVersion_v1_5;
            else if (uMinor == 6)
                sv = SettingsVersion_v1_6;
            else if (uMinor == 7)
                sv = SettingsVersion_v1_7;
            else if (uMinor == 8)
                sv = SettingsVersion_v1_8;
            else if (uMinor == 9)
                sv = SettingsVersion_v1_9;
            else if (uMinor == 10)
                sv = SettingsVersion_v1_10;
            else if (uMinor == 11)
                sv = SettingsVersion_v1_11;
            else if (uMinor == 12)
                sv = SettingsVersion_v1_12;
            else if (uMinor == 13)
                sv = SettingsVersion_v1_13;
            else if (uMinor == 14)
                sv = SettingsVersion_v1_14;
            else if (uMinor == 15)
                sv = SettingsVersion_v1_15;
            else if (uMinor == 16)
                sv = SettingsVersion_v1_16;
            else if (uMinor == 17)
                sv = SettingsVersion_v1_17;
            else if (uMinor == 18)
                sv = SettingsVersion_v1_18;
            else if (uMinor == 19)
                sv = SettingsVersion_v1_19;
            else if (uMinor > 19)
                sv = SettingsVersion_Future;
        }
        else if (uMajor > 1)
            sv = SettingsVersion_Future;

        Log(("Parsed settings version %d.%d to enum value %d\n", uMajor, uMinor, sv));
    }

    if (sv == SettingsVersion_Null)
        throw ConfigFileError(this, pElm, N_("Cannot handle settings version '%s'"), strVersion.c_str());

    return sv;
}

/**
 * Helper function that parses a UUID in string form into
 * a com::Guid item. Accepts UUIDs both with and without
 * "{}" brackets. Throws on errors.
 * @param guid
 * @param strUUID
 * @param pElm
 */
void ConfigFileBase::parseUUID(Guid &guid,
                               const Utf8Str &strUUID,
                               const xml::ElementNode *pElm) const
{
    guid = strUUID.c_str();
    if (guid.isZero())
        throw ConfigFileError(this, pElm, N_("UUID \"%s\" has zero format"), strUUID.c_str());
    else if (!guid.isValid())
        throw ConfigFileError(this, pElm, N_("UUID \"%s\" has invalid format"), strUUID.c_str());
}

/**
 * Parses the given string in str and attempts to treat it as an ISO
 * date/time stamp to put into timestamp. Throws on errors.
 * @param timestamp
 * @param str
 * @param pElm
 */
void ConfigFileBase::parseTimestamp(RTTIMESPEC &timestamp,
                                    const com::Utf8Str &str,
                                    const xml::ElementNode *pElm) const
{
    const char *pcsz = str.c_str();
        //  yyyy-mm-ddThh:mm:ss
        // "2009-07-10T11:54:03Z"
        //  01234567890123456789
        //            1
    if (str.length() > 19)
    {
        // timezone must either be unspecified or 'Z' for UTC
        if (    (pcsz[19])
             && (pcsz[19] != 'Z')
           )
            throw ConfigFileError(this, pElm, N_("Cannot handle ISO timestamp '%s': is not UTC date"), str.c_str());

        int32_t yyyy;
        uint32_t mm, dd, hh, min, secs;
        if (    (pcsz[4] == '-')
             && (pcsz[7] == '-')
             && (pcsz[10] == 'T')
             && (pcsz[13] == ':')
             && (pcsz[16] == ':')
           )
        {
            int rc;
            if (    (RT_SUCCESS(rc = RTStrToInt32Ex(pcsz, NULL, 0, &yyyy)))
                        // could theoretically be negative but let's assume that nobody
                        // created virtual machines before the Christian era
                 && (RT_SUCCESS(rc = RTStrToUInt32Ex(pcsz + 5, NULL, 0, &mm)))
                 && (RT_SUCCESS(rc = RTStrToUInt32Ex(pcsz + 8, NULL, 0, &dd)))
                 && (RT_SUCCESS(rc = RTStrToUInt32Ex(pcsz + 11, NULL, 0, &hh)))
                 && (RT_SUCCESS(rc = RTStrToUInt32Ex(pcsz + 14, NULL, 0, &min)))
                 && (RT_SUCCESS(rc = RTStrToUInt32Ex(pcsz + 17, NULL, 0, &secs)))
               )
            {
                RTTIME time =
                {
                    yyyy,
                    (uint8_t)mm,
                    0,
                    0,
                    (uint8_t)dd,
                    (uint8_t)hh,
                    (uint8_t)min,
                    (uint8_t)secs,
                    0,
                    RTTIME_FLAGS_TYPE_UTC,
                    0
                };
                if (RTTimeNormalize(&time))
                    if (RTTimeImplode(&timestamp, &time))
                        return;
            }

            throw ConfigFileError(this, pElm, N_("Cannot parse ISO timestamp '%s': runtime error, %Rra"), str.c_str(), rc);
        }

        throw ConfigFileError(this, pElm, N_("Cannot parse ISO timestamp '%s': invalid format"), str.c_str());
    }
}

/**
 * Helper function that parses a Base64 formatted string into a binary blob.
 * @param binary
 * @param str
 * @param pElm
 */
void ConfigFileBase::parseBase64(IconBlob &binary,
                                 const Utf8Str &str,
                                 const xml::ElementNode *pElm) const
{
#define DECODE_STR_MAX _1M
    const char* psz = str.c_str();
    ssize_t cbOut = RTBase64DecodedSize(psz, NULL);
    if (cbOut > DECODE_STR_MAX)
        throw ConfigFileError(this, pElm, N_("Base64 encoded data too long (%d > %d)"), cbOut, DECODE_STR_MAX);
    else if (cbOut < 0)
        throw ConfigFileError(this, pElm, N_("Base64 encoded data '%s' invalid"), psz);
    binary.resize((size_t)cbOut);
    int vrc = VINF_SUCCESS;
    if (cbOut)
        vrc = RTBase64Decode(psz, &binary.front(), (size_t)cbOut, NULL, NULL);
    if (RT_FAILURE(vrc))
    {
        binary.resize(0);
        throw ConfigFileError(this, pElm, N_("Base64 encoded data could not be decoded (%Rrc)"), vrc);
    }
}

/**
 * Helper to create a string for a RTTIMESPEC for writing out ISO timestamps.
 * @param stamp
 * @return
 */
com::Utf8Str ConfigFileBase::stringifyTimestamp(const RTTIMESPEC &stamp) const
{
    RTTIME time;
    if (!RTTimeExplode(&time, &stamp))
        throw ConfigFileError(this, NULL, N_("Timespec %lld ms is invalid"), RTTimeSpecGetMilli(&stamp));

    return Utf8StrFmt("%04u-%02u-%02uT%02u:%02u:%02uZ",
                      time.i32Year, time.u8Month, time.u8MonthDay,
                      time.u8Hour, time.u8Minute, time.u8Second);
}

/**
 * Helper to create a base64 encoded string out of a binary blob.
 * @param str
 * @param binary
 * @throws std::bad_alloc and ConfigFileError
 */
void ConfigFileBase::toBase64(com::Utf8Str &str, const IconBlob &binary) const
{
    size_t cb = binary.size();
    if (cb > 0)
    {
        size_t cchOut = RTBase64EncodedLength(cb);
        str.reserve(cchOut + 1);
        int vrc = RTBase64Encode(&binary.front(), cb, str.mutableRaw(), str.capacity(), NULL);
        if (RT_FAILURE(vrc))
            throw ConfigFileError(this, NULL, N_("Failed to convert binary data to base64 format (%Rrc)"), vrc);
        str.jolt();
    }
}

/**
 * Helper method to read in an ExtraData subtree and stores its contents
 * in the given map of extradata items. Used for both main and machine
 * extradata (MainConfigFile and MachineConfigFile).
 * @param elmExtraData
 * @param map
 */
void ConfigFileBase::readExtraData(const xml::ElementNode &elmExtraData,
                                   StringsMap &map)
{
    xml::NodesLoop nlLevel4(elmExtraData);
    const xml::ElementNode *pelmExtraDataItem;
    while ((pelmExtraDataItem = nlLevel4.forAllNodes()))
    {
        if (pelmExtraDataItem->nameEquals("ExtraDataItem"))
        {
            // <ExtraDataItem name="GUI/LastWindowPostion" value="97,88,981,858"/>
            Utf8Str strName, strValue;
            if (   pelmExtraDataItem->getAttributeValue("name", strName)
                && pelmExtraDataItem->getAttributeValue("value", strValue) )
                map[strName] = strValue;
            else
                throw ConfigFileError(this, pelmExtraDataItem, N_("Required ExtraDataItem/@name or @value attribute is missing"));
        }
    }
}

/**
 * Reads \<USBDeviceFilter\> entries from under the given elmDeviceFilters node and
 * stores them in the given linklist. This is in ConfigFileBase because it's used
 * from both MainConfigFile (for host filters) and MachineConfigFile (for machine
 * filters).
 * @param elmDeviceFilters
 * @param ll
 */
void ConfigFileBase::readUSBDeviceFilters(const xml::ElementNode &elmDeviceFilters,
                                          USBDeviceFiltersList &ll)
{
    xml::NodesLoop nl1(elmDeviceFilters, "DeviceFilter");
    const xml::ElementNode *pelmLevel4Child;
    while ((pelmLevel4Child = nl1.forAllNodes()))
    {
        USBDeviceFilter flt;
        flt.action = USBDeviceFilterAction_Ignore;
        Utf8Str strAction;
        if (   pelmLevel4Child->getAttributeValue("name", flt.strName)
            && pelmLevel4Child->getAttributeValue("active", flt.fActive))
        {
            if (!pelmLevel4Child->getAttributeValue("vendorId", flt.strVendorId))
                pelmLevel4Child->getAttributeValue("vendorid", flt.strVendorId);            // used before 1.3
            if (!pelmLevel4Child->getAttributeValue("productId", flt.strProductId))
                pelmLevel4Child->getAttributeValue("productid", flt.strProductId);          // used before 1.3
            pelmLevel4Child->getAttributeValue("revision", flt.strRevision);
            pelmLevel4Child->getAttributeValue("manufacturer", flt.strManufacturer);
            pelmLevel4Child->getAttributeValue("product", flt.strProduct);
            if (!pelmLevel4Child->getAttributeValue("serialNumber", flt.strSerialNumber))
                pelmLevel4Child->getAttributeValue("serialnumber", flt.strSerialNumber);    // used before 1.3
            pelmLevel4Child->getAttributeValue("port", flt.strPort);

            // the next 2 are irrelevant for host USB objects
            pelmLevel4Child->getAttributeValue("remote", flt.strRemote);
            pelmLevel4Child->getAttributeValue("maskedInterfaces", flt.ulMaskedInterfaces);

            // action is only used with host USB objects
            if (pelmLevel4Child->getAttributeValue("action", strAction))
            {
                if (strAction == "Ignore")
                    flt.action = USBDeviceFilterAction_Ignore;
                else if (strAction == "Hold")
                    flt.action = USBDeviceFilterAction_Hold;
                else
                    throw ConfigFileError(this, pelmLevel4Child, N_("Invalid value '%s' in DeviceFilter/@action attribute"), strAction.c_str());
            }

            ll.push_back(flt);
        }
    }
}

/**
 * Reads a media registry entry from the main VirtualBox.xml file.
 *
 * Whereas the current media registry code is fairly straightforward, it was quite a mess
 * with settings format before 1.4 (VirtualBox 2.0 used settings format 1.3). The elements
 * in the media registry were much more inconsistent, and different elements were used
 * depending on the type of device and image.
 *
 * @param t
 * @param elmMedium
 * @param med
 */
void ConfigFileBase::readMediumOne(MediaType t,
                                   const xml::ElementNode &elmMedium,
                                   Medium &med)
{
    // <HardDisk uuid="{5471ecdb-1ddb-4012-a801-6d98e226868b}" location="/mnt/innotek-unix/vdis/Windows XP.vdi" format="VDI" type="Normal">

    Utf8Str strUUID;
    if (!elmMedium.getAttributeValue("uuid", strUUID))
        throw ConfigFileError(this, &elmMedium, N_("Required %s/@uuid attribute is missing"), elmMedium.getName());

    parseUUID(med.uuid, strUUID, &elmMedium);

    bool fNeedsLocation = true;

    if (t == HardDisk)
    {
        if (m->sv < SettingsVersion_v1_4)
        {
            // here the system is:
            //         <HardDisk uuid="{....}" type="normal">
            //           <VirtualDiskImage filePath="/path/to/xxx.vdi"/>
            //         </HardDisk>

            fNeedsLocation = false;
            bool fNeedsFilePath = true;
            const xml::ElementNode *pelmImage;
            if ((pelmImage = elmMedium.findChildElement("VirtualDiskImage")))
                med.strFormat = "VDI";
            else if ((pelmImage = elmMedium.findChildElement("VMDKImage")))
                med.strFormat = "VMDK";
            else if ((pelmImage = elmMedium.findChildElement("VHDImage")))
                med.strFormat = "VHD";
            else if ((pelmImage = elmMedium.findChildElement("ISCSIHardDisk")))
            {
                med.strFormat = "iSCSI";

                fNeedsFilePath = false;
                // location is special here: current settings specify an "iscsi://user@server:port/target/lun"
                // string for the location and also have several disk properties for these, whereas this used
                // to be hidden in several sub-elements before 1.4, so compose a location string and set up
                // the properties:
                med.strLocation = "iscsi://";
                Utf8Str strUser, strServer, strPort, strTarget, strLun;
                if (pelmImage->getAttributeValue("userName", strUser))
                {
                    med.strLocation.append(strUser);
                    med.strLocation.append("@");
                }
                Utf8Str strServerAndPort;
                if (pelmImage->getAttributeValue("server", strServer))
                {
                    strServerAndPort = strServer;
                }
                if (pelmImage->getAttributeValue("port", strPort))
                {
                    if (strServerAndPort.length())
                        strServerAndPort.append(":");
                    strServerAndPort.append(strPort);
                }
                med.strLocation.append(strServerAndPort);
                if (pelmImage->getAttributeValue("target", strTarget))
                {
                    med.strLocation.append("/");
                    med.strLocation.append(strTarget);
                }
                if (pelmImage->getAttributeValue("lun", strLun))
                {
                    med.strLocation.append("/");
                    med.strLocation.append(strLun);
                }

                if (strServer.length() && strPort.length())
                    med.properties["TargetAddress"] = strServerAndPort;
                if (strTarget.length())
                    med.properties["TargetName"] = strTarget;
                if (strUser.length())
                    med.properties["InitiatorUsername"] = strUser;
                Utf8Str strPassword;
                if (pelmImage->getAttributeValue("password", strPassword))
                    med.properties["InitiatorSecret"] = strPassword;
                if (strLun.length())
                    med.properties["LUN"] = strLun;
            }
            else if ((pelmImage = elmMedium.findChildElement("CustomHardDisk")))
            {
                fNeedsFilePath = false;
                fNeedsLocation = true;
                    // also requires @format attribute, which will be queried below
            }
            else
                throw ConfigFileError(this, &elmMedium, N_("Required %s/VirtualDiskImage element is missing"), elmMedium.getName());

            if (fNeedsFilePath)
            {
                if (!(pelmImage->getAttributeValuePath("filePath", med.strLocation)))
                    throw ConfigFileError(this, &elmMedium, N_("Required %s/@filePath attribute is missing"), elmMedium.getName());
            }
        }

        if (med.strFormat.isEmpty())        // not set with 1.4 format above, or 1.4 Custom format?
            if (!elmMedium.getAttributeValue("format", med.strFormat))
                throw ConfigFileError(this, &elmMedium, N_("Required %s/@format attribute is missing"), elmMedium.getName());

        if (!elmMedium.getAttributeValue("autoReset", med.fAutoReset))
            med.fAutoReset = false;

        Utf8Str strType;
        if (elmMedium.getAttributeValue("type", strType))
        {
            // pre-1.4 used lower case, so make this case-insensitive
            strType.toUpper();
            if (strType == "NORMAL")
                med.hdType = MediumType_Normal;
            else if (strType == "IMMUTABLE")
                med.hdType = MediumType_Immutable;
            else if (strType == "WRITETHROUGH")
                med.hdType = MediumType_Writethrough;
            else if (strType == "SHAREABLE")
                med.hdType = MediumType_Shareable;
            else if (strType == "READONLY")
                med.hdType = MediumType_Readonly;
            else if (strType == "MULTIATTACH")
                med.hdType = MediumType_MultiAttach;
            else
                throw ConfigFileError(this, &elmMedium, N_("HardDisk/@type attribute must be one of Normal, Immutable, Writethrough, Shareable, Readonly or MultiAttach"));
        }
    }
    else
    {
        if (m->sv < SettingsVersion_v1_4)
        {
            // DVD and floppy images before 1.4 had "src" attribute instead of "location"
            if (!elmMedium.getAttributeValue("src", med.strLocation))
                throw ConfigFileError(this, &elmMedium, N_("Required %s/@src attribute is missing"), elmMedium.getName());

            fNeedsLocation = false;
        }

        if (!elmMedium.getAttributeValue("format", med.strFormat))
        {
            // DVD and floppy images before 1.11 had no format attribute. assign the default.
            med.strFormat = "RAW";
        }

        if (t == DVDImage)
            med.hdType = MediumType_Readonly;
        else if (t == FloppyImage)
            med.hdType = MediumType_Writethrough;
    }

    if (fNeedsLocation)
        // current files and 1.4 CustomHardDisk elements must have a location attribute
        if (!elmMedium.getAttributeValue("location", med.strLocation))
            throw ConfigFileError(this, &elmMedium, N_("Required %s/@location attribute is missing"), elmMedium.getName());

    // 3.2 builds added Description as an attribute, read it silently
    // and write it back as an element starting with 5.1.26
    elmMedium.getAttributeValue("Description", med.strDescription);

    xml::NodesLoop nlMediumChildren(elmMedium);
    const xml::ElementNode *pelmMediumChild;
    while ((pelmMediumChild = nlMediumChildren.forAllNodes()))
    {
        if (pelmMediumChild->nameEquals("Description"))
            med.strDescription = pelmMediumChild->getValue();
        else if (pelmMediumChild->nameEquals("Property"))
        {
            // handle medium properties
            Utf8Str strPropName, strPropValue;
            if (   pelmMediumChild->getAttributeValue("name", strPropName)
                && pelmMediumChild->getAttributeValue("value", strPropValue) )
                med.properties[strPropName] = strPropValue;
            else
                throw ConfigFileError(this, pelmMediumChild, N_("Required HardDisk/Property/@name or @value attribute is missing"));
        }
    }
}

/**
 * Reads a media registry entry from the main VirtualBox.xml file and recurses
 * into children where applicable.
 *
 * @param t
 * @param depth
 * @param elmMedium
 * @param med
 */
void ConfigFileBase::readMedium(MediaType t,
                                uint32_t depth,
                                const xml::ElementNode &elmMedium,  // HardDisk node if root; if recursing,
                                                                    // child HardDisk node or DiffHardDisk node for pre-1.4
                                Medium &med)                        // medium settings to fill out
{
    if (depth > SETTINGS_MEDIUM_DEPTH_MAX)
        throw ConfigFileError(this, &elmMedium, N_("Maximum medium tree depth of %u exceeded"), SETTINGS_MEDIUM_DEPTH_MAX);

    // Do not inline this method call, as the purpose of having this separate
    // is to save on stack size. Less local variables are the key for reaching
    // deep recursion levels with small stack (XPCOM/g++ without optimization).
    readMediumOne(t, elmMedium, med);

    if (t != HardDisk)
        return;

    // recurse to handle children
    MediaList &llSettingsChildren = med.llChildren;
    xml::NodesLoop nl2(elmMedium, m->sv >= SettingsVersion_v1_4 ? "HardDisk" : "DiffHardDisk");
    const xml::ElementNode *pelmHDChild;
    while ((pelmHDChild = nl2.forAllNodes()))
    {
        // recurse with this element and put the child at the end of the list.
        // XPCOM has very small stack, avoid big local variables and use the
        // list element.
        llSettingsChildren.push_back(Medium::Empty);
        readMedium(t,
                   depth + 1,
                   *pelmHDChild,
                   llSettingsChildren.back());
    }
}

/**
 * Reads in the entire \<MediaRegistry\> chunk and stores its media in the lists
 * of the given MediaRegistry structure.
 *
 * This is used in both MainConfigFile and MachineConfigFile since starting with
 * VirtualBox 4.0, we can have media registries in both.
 *
 * For pre-1.4 files, this gets called with the \<DiskRegistry\> chunk instead.
 *
 * @param   elmMediaRegistry
 * @param   mr
 */
void ConfigFileBase::readMediaRegistry(const xml::ElementNode &elmMediaRegistry,
                                       MediaRegistry &mr)
{
    xml::NodesLoop nl1(elmMediaRegistry);
    const xml::ElementNode *pelmChild1;
    while ((pelmChild1 = nl1.forAllNodes()))
    {
        MediaType t = Error;
        if (pelmChild1->nameEquals("HardDisks"))
            t = HardDisk;
        else if (pelmChild1->nameEquals("DVDImages"))
            t = DVDImage;
        else if (pelmChild1->nameEquals("FloppyImages"))
            t = FloppyImage;
        else
            continue;

        xml::NodesLoop nl2(*pelmChild1);
        const xml::ElementNode *pelmMedium;
        while ((pelmMedium = nl2.forAllNodes()))
        {
            if (   t == HardDisk
                && (pelmMedium->nameEquals("HardDisk")))
            {
                mr.llHardDisks.push_back(Medium::Empty);
                readMedium(t, 1, *pelmMedium, mr.llHardDisks.back());
            }
            else if (   t == DVDImage
                     && (pelmMedium->nameEquals("Image")))
            {
                mr.llDvdImages.push_back(Medium::Empty);
                readMedium(t, 1, *pelmMedium, mr.llDvdImages.back());
            }
            else if (   t == FloppyImage
                     && (pelmMedium->nameEquals("Image")))
            {
                mr.llFloppyImages.push_back(Medium::Empty);
                readMedium(t, 1, *pelmMedium, mr.llFloppyImages.back());
            }
        }
    }
}

/**
 * This is common version for reading NAT port forward rule in per-_machine's_adapter_ and
 * per-network approaches.
 * Note: this function doesn't in fill given list from xml::ElementNodesList, because there is conflicting
 * declaration in ovmfreader.h.
 */
void ConfigFileBase::readNATForwardRulesMap(const xml::ElementNode &elmParent, NATRulesMap &mapRules)
{
    xml::ElementNodesList plstRules;
    elmParent.getChildElements(plstRules, "Forwarding");
    for (xml::ElementNodesList::iterator pf = plstRules.begin(); pf != plstRules.end(); ++pf)
    {
        NATRule rule;
        uint32_t port = 0;
        (*pf)->getAttributeValue("name", rule.strName);
        (*pf)->getAttributeValue("proto", (uint32_t&)rule.proto);
        (*pf)->getAttributeValue("hostip", rule.strHostIP);
        (*pf)->getAttributeValue("hostport", port);
        rule.u16HostPort = (uint16_t)port;
        (*pf)->getAttributeValue("guestip", rule.strGuestIP);
        (*pf)->getAttributeValue("guestport", port);
        rule.u16GuestPort = (uint16_t)port;
        mapRules.insert(std::make_pair(rule.strName, rule));
    }
}

void ConfigFileBase::readNATLoopbacks(const xml::ElementNode &elmParent, NATLoopbackOffsetList &llLoopbacks)
{
    xml::ElementNodesList plstLoopbacks;
    elmParent.getChildElements(plstLoopbacks, "Loopback4");
    for (xml::ElementNodesList::iterator lo = plstLoopbacks.begin();
         lo != plstLoopbacks.end(); ++lo)
    {
        NATHostLoopbackOffset loopback;
        (*lo)->getAttributeValue("address", loopback.strLoopbackHostAddress);
        (*lo)->getAttributeValue("offset", (uint32_t&)loopback.u32Offset);
        llLoopbacks.push_back(loopback);
    }
}


/**
 * Adds a "version" attribute to the given XML element with the
 * VirtualBox settings version (e.g. "1.10-linux"). Used by
 * the XML format for the root element and by the OVF export
 * for the vbox:Machine element.
 * @param elm
 */
void ConfigFileBase::setVersionAttribute(xml::ElementNode &elm)
{
    const char *pcszVersion = NULL;
    switch (m->sv)
    {
        case SettingsVersion_v1_8:
            pcszVersion = "1.8";
            break;

        case SettingsVersion_v1_9:
            pcszVersion = "1.9";
            break;

        case SettingsVersion_v1_10:
            pcszVersion = "1.10";
            break;

        case SettingsVersion_v1_11:
            pcszVersion = "1.11";
            break;

        case SettingsVersion_v1_12:
            pcszVersion = "1.12";
            break;

        case SettingsVersion_v1_13:
            pcszVersion = "1.13";
            break;

        case SettingsVersion_v1_14:
            pcszVersion = "1.14";
            break;

        case SettingsVersion_v1_15:
            pcszVersion = "1.15";
            break;

        case SettingsVersion_v1_16:
            pcszVersion = "1.16";
            break;

        case SettingsVersion_v1_17:
            pcszVersion = "1.17";
            break;

        case SettingsVersion_v1_18:
            pcszVersion = "1.18";
            break;

        case SettingsVersion_v1_19:
            pcszVersion = "1.19";
            break;

        default:
            // catch human error: the assertion below will trigger in debug
            // or dbgopt builds, so hopefully this will get noticed sooner in
            // the future, because it's easy to forget top update something.
            AssertMsg(m->sv <= SettingsVersion_v1_7, ("Settings.cpp: unexpected settings version %d, unhandled future version?\n", m->sv));
            // silently upgrade if this is less than 1.7 because that's the oldest we can write
            if (m->sv <= SettingsVersion_v1_7)
            {
                pcszVersion = "1.7";
                m->sv = SettingsVersion_v1_7;
            }
            else
            {
                // This is reached for SettingsVersion_Future and forgotten
                // settings version after SettingsVersion_v1_7, which should
                // not happen (see assertion above). Set the version to the
                // latest known version, to minimize loss of information, but
                // as we can't predict the future we have to use some format
                // we know, and latest should be the best choice. Note that
                // for "forgotten settings" this may not be the best choice,
                // but as it's an omission of someone who changed this file
                // it's the only generic possibility.
                pcszVersion = "1.19";
                m->sv = SettingsVersion_v1_19;
            }
            break;
    }

    m->strSettingsVersionFull = Utf8StrFmt("%s-%s",
                                           pcszVersion,
                                           VBOX_XML_PLATFORM);  // e.g. "linux"
    elm.setAttribute("version", m->strSettingsVersionFull);
}


/**
 * Creates a special backup file in case there is a version
 * bump, so that it is possible to go back to the previous
 * state. This is done only once (not for every settings
 * version bump), when the settings version is newer than
 * the version read from the config file. Must be called
 * before ConfigFileBase::createStubDocument, because that
 * method may alter information which this method needs.
 */
void ConfigFileBase::specialBackupIfFirstBump()
{
    // Since this gets called before the XML document is actually written out,
    // this is where we must check whether we're upgrading the settings version
    // and need to make a backup, so the user can go back to an earlier
    // VirtualBox version and recover his old settings files.
    if (    (m->svRead != SettingsVersion_Null)     // old file exists?
         && (m->svRead < m->sv)                     // we're upgrading?
       )
    {
        // compose new filename: strip off trailing ".xml"/".vbox"
        Utf8Str strFilenameNew;
        Utf8Str strExt = ".xml";
        if (m->strFilename.endsWith(".xml"))
            strFilenameNew = m->strFilename.substr(0, m->strFilename.length() - 4);
        else if (m->strFilename.endsWith(".vbox"))
        {
            strFilenameNew = m->strFilename.substr(0, m->strFilename.length() - 5);
            strExt = ".vbox";
        }

        // and append something like "-1.3-linux.xml"
        strFilenameNew.append("-");
        strFilenameNew.append(m->strSettingsVersionFull);       // e.g. "1.3-linux"
        strFilenameNew.append(strExt);                          // .xml for main config, .vbox for machine config

        // Copying the file cannot be avoided, as doing tricks with renaming
        // causes trouble on OS X with aliases (which follow the rename), and
        // on all platforms there is a risk of "losing" the VM config when
        // running out of space, as a rename here couldn't be rolled back.
        // Ignoring all errors besides running out of space is intentional, as
        // we don't want to do anything if the file already exists.
        int vrc = RTFileCopy(m->strFilename.c_str(), strFilenameNew.c_str());
        if (RT_UNLIKELY(vrc == VERR_DISK_FULL))
            throw ConfigFileError(this, NULL, N_("Cannot create settings backup file when upgrading to a newer settings format"));

        // do this only once
        m->svRead = SettingsVersion_Null;
    }
}

/**
 * Creates a new stub xml::Document in the m->pDoc member with the
 * root "VirtualBox" element set up. This is used by both
 * MainConfigFile and MachineConfigFile at the beginning of writing
 * out their XML.
 *
 * Before calling this, it is the responsibility of the caller to
 * set the "sv" member to the required settings version that is to
 * be written. For newly created files, the settings version will be
 * recent (1.12 or later if necessary); for files read in from disk
 * earlier, it will be the settings version indicated in the file.
 * However, this method will silently make sure that the settings
 * version is always at least 1.7 and change it if necessary, since
 * there is no write support for earlier settings versions.
 */
void ConfigFileBase::createStubDocument()
{
    Assert(m->pDoc == NULL);
    m->pDoc = new xml::Document;

    m->pelmRoot = m->pDoc->createRootElement("VirtualBox",
                                             "\n"
                                             "** DO NOT EDIT THIS FILE.\n"
                                             "** If you make changes to this file while any VirtualBox related application\n"
                                             "** is running, your changes will be overwritten later, without taking effect.\n"
                                             "** Use VBoxManage or the VirtualBox Manager GUI to make changes.\n"
);
    m->pelmRoot->setAttribute("xmlns", VBOX_XML_NAMESPACE);
    // Have the code for producing a proper schema reference. Not used by most
    // tools, so don't bother doing it. The schema is not on the server anyway.
#ifdef VBOX_WITH_SETTINGS_SCHEMA
    m->pelmRoot->setAttribute("xmlns:xsi", "http://www.w3.org/2001/XMLSchema-instance");
    m->pelmRoot->setAttribute("xsi:schemaLocation", VBOX_XML_NAMESPACE " " VBOX_XML_SCHEMA);
#endif

    // add settings version attribute to root element, update m->strSettingsVersionFull
    setVersionAttribute(*m->pelmRoot);

    LogRel(("Saving settings file \"%s\" with version \"%s\"\n", m->strFilename.c_str(), m->strSettingsVersionFull.c_str()));
}

/**
 * Creates an \<ExtraData\> node under the given parent element with
 * \<ExtraDataItem\> childern according to the contents of the given
 * map.
 *
 * This is in ConfigFileBase because it's used in both MainConfigFile
 * and MachineConfigFile, which both can have extradata.
 *
 * @param elmParent
 * @param me
 */
void ConfigFileBase::buildExtraData(xml::ElementNode &elmParent,
                                    const StringsMap &me)
{
    if (me.size())
    {
        xml::ElementNode *pelmExtraData = elmParent.createChild("ExtraData");
        for (StringsMap::const_iterator it = me.begin();
             it != me.end();
             ++it)
        {
            const Utf8Str &strName = it->first;
            const Utf8Str &strValue = it->second;
            xml::ElementNode *pelmThis = pelmExtraData->createChild("ExtraDataItem");
            pelmThis->setAttribute("name", strName);
            pelmThis->setAttribute("value", strValue);
        }
    }
}

/**
 * Creates \<DeviceFilter\> nodes under the given parent element according to
 * the contents of the given USBDeviceFiltersList. This is in ConfigFileBase
 * because it's used in both MainConfigFile (for host filters) and
 * MachineConfigFile (for machine filters).
 *
 * If fHostMode is true, this means that we're supposed to write filters
 * for the IHost interface (respect "action", omit "strRemote" and
 * "ulMaskedInterfaces" in struct USBDeviceFilter).
 *
 * @param elmParent
 * @param ll
 * @param fHostMode
 */
void ConfigFileBase::buildUSBDeviceFilters(xml::ElementNode &elmParent,
                                           const USBDeviceFiltersList &ll,
                                           bool fHostMode)
{
    for (USBDeviceFiltersList::const_iterator it = ll.begin();
         it != ll.end();
         ++it)
    {
        const USBDeviceFilter &flt = *it;
        xml::ElementNode *pelmFilter = elmParent.createChild("DeviceFilter");
        pelmFilter->setAttribute("name", flt.strName);
        pelmFilter->setAttribute("active", flt.fActive);
        if (flt.strVendorId.length())
            pelmFilter->setAttribute("vendorId", flt.strVendorId);
        if (flt.strProductId.length())
            pelmFilter->setAttribute("productId", flt.strProductId);
        if (flt.strRevision.length())
            pelmFilter->setAttribute("revision", flt.strRevision);
        if (flt.strManufacturer.length())
            pelmFilter->setAttribute("manufacturer", flt.strManufacturer);
        if (flt.strProduct.length())
            pelmFilter->setAttribute("product", flt.strProduct);
        if (flt.strSerialNumber.length())
            pelmFilter->setAttribute("serialNumber", flt.strSerialNumber);
        if (flt.strPort.length())
            pelmFilter->setAttribute("port", flt.strPort);

        if (fHostMode)
        {
            const char *pcsz =
                (flt.action == USBDeviceFilterAction_Ignore) ? "Ignore"
                : /*(flt.action == USBDeviceFilterAction_Hold) ?*/ "Hold";
            pelmFilter->setAttribute("action", pcsz);
        }
        else
        {
            if (flt.strRemote.length())
                pelmFilter->setAttribute("remote", flt.strRemote);
            if (flt.ulMaskedInterfaces)
                pelmFilter->setAttribute("maskedInterfaces", flt.ulMaskedInterfaces);
        }
    }
}

/**
 * Creates a single \<HardDisk\> element for the given Medium structure
 * and recurses to write the child hard disks underneath. Called from
 * MainConfigFile::write().
 *
 * @param t
 * @param depth
 * @param elmMedium
 * @param mdm
 */
void ConfigFileBase::buildMedium(MediaType t,
                                 uint32_t depth,
                                 xml::ElementNode &elmMedium,
                                 const Medium &mdm)
{
    if (depth > SETTINGS_MEDIUM_DEPTH_MAX)
        throw ConfigFileError(this, &elmMedium, N_("Maximum medium tree depth of %u exceeded"), SETTINGS_MEDIUM_DEPTH_MAX);

    xml::ElementNode *pelmMedium;

    if (t == HardDisk)
        pelmMedium = elmMedium.createChild("HardDisk");
    else
        pelmMedium = elmMedium.createChild("Image");

    pelmMedium->setAttribute("uuid", mdm.uuid.toStringCurly());

    pelmMedium->setAttributePath("location", mdm.strLocation);

    if (t == HardDisk || RTStrICmp(mdm.strFormat.c_str(), "RAW"))
        pelmMedium->setAttribute("format", mdm.strFormat);
    if (   t == HardDisk
        && mdm.fAutoReset)
        pelmMedium->setAttribute("autoReset", mdm.fAutoReset);
    if (mdm.strDescription.length())
        pelmMedium->createChild("Description")->addContent(mdm.strDescription);

    for (StringsMap::const_iterator it = mdm.properties.begin();
         it != mdm.properties.end();
         ++it)
    {
        xml::ElementNode *pelmProp = pelmMedium->createChild("Property");
        pelmProp->setAttribute("name", it->first);
        pelmProp->setAttribute("value", it->second);
    }

    // only for base hard disks, save the type
    if (depth == 1)
    {
        // no need to save the usual DVD/floppy medium types
        if (   (   t != DVDImage
                || (   mdm.hdType != MediumType_Writethrough // shouldn't happen
                    && mdm.hdType != MediumType_Readonly))
            && (   t != FloppyImage
                || mdm.hdType != MediumType_Writethrough))
        {
            const char *pcszType =
                mdm.hdType == MediumType_Normal ? "Normal" :
                mdm.hdType == MediumType_Immutable ? "Immutable" :
                mdm.hdType == MediumType_Writethrough ? "Writethrough" :
                mdm.hdType == MediumType_Shareable ? "Shareable" :
                mdm.hdType == MediumType_Readonly ? "Readonly" :
                mdm.hdType == MediumType_MultiAttach ? "MultiAttach" :
                "INVALID";
            pelmMedium->setAttribute("type", pcszType);
        }
    }

    for (MediaList::const_iterator it = mdm.llChildren.begin();
         it != mdm.llChildren.end();
         ++it)
    {
        // recurse for children
        buildMedium(t,              // device type
                    depth + 1,      // depth
                    *pelmMedium,    // parent
                    *it);           // settings::Medium
    }
}

/**
 * Creates a \<MediaRegistry\> node under the given parent and writes out all
 * hard disks and DVD and floppy images from the lists in the given MediaRegistry
 * structure under it.
 *
 * This is used in both MainConfigFile and MachineConfigFile since starting with
 * VirtualBox 4.0, we can have media registries in both.
 *
 * @param elmParent
 * @param mr
 */
void ConfigFileBase::buildMediaRegistry(xml::ElementNode &elmParent,
                                        const MediaRegistry &mr)
{
    if (mr.llHardDisks.size() == 0 && mr.llDvdImages.size() == 0 && mr.llFloppyImages.size() == 0)
        return;

    xml::ElementNode *pelmMediaRegistry = elmParent.createChild("MediaRegistry");

    if (mr.llHardDisks.size())
    {
        xml::ElementNode *pelmHardDisks = pelmMediaRegistry->createChild("HardDisks");
        for (MediaList::const_iterator it = mr.llHardDisks.begin();
             it != mr.llHardDisks.end();
             ++it)
        {
            buildMedium(HardDisk, 1, *pelmHardDisks, *it);
        }
    }

    if (mr.llDvdImages.size())
    {
        xml::ElementNode *pelmDVDImages = pelmMediaRegistry->createChild("DVDImages");
        for (MediaList::const_iterator it = mr.llDvdImages.begin();
             it != mr.llDvdImages.end();
             ++it)
        {
            buildMedium(DVDImage, 1, *pelmDVDImages, *it);
        }
    }

    if (mr.llFloppyImages.size())
    {
        xml::ElementNode *pelmFloppyImages = pelmMediaRegistry->createChild("FloppyImages");
        for (MediaList::const_iterator it = mr.llFloppyImages.begin();
             it != mr.llFloppyImages.end();
             ++it)
        {
            buildMedium(FloppyImage, 1, *pelmFloppyImages, *it);
        }
    }
}

/**
 * Serialize NAT port-forwarding rules in parent container.
 * Note: it's responsibility of caller to create parent of the list tag.
 * because this method used for serializing per-_mahine's_adapter_ and per-network approaches.
 */
void ConfigFileBase::buildNATForwardRulesMap(xml::ElementNode &elmParent, const NATRulesMap &mapRules)
{
    for (NATRulesMap::const_iterator r = mapRules.begin();
         r != mapRules.end(); ++r)
    {
        xml::ElementNode *pelmPF;
        pelmPF = elmParent.createChild("Forwarding");
        const NATRule &nr = r->second;
        if (nr.strName.length())
            pelmPF->setAttribute("name", nr.strName);
        pelmPF->setAttribute("proto", nr.proto);
        if (nr.strHostIP.length())
            pelmPF->setAttribute("hostip", nr.strHostIP);
        if (nr.u16HostPort)
            pelmPF->setAttribute("hostport", nr.u16HostPort);
        if (nr.strGuestIP.length())
            pelmPF->setAttribute("guestip", nr.strGuestIP);
        if (nr.u16GuestPort)
            pelmPF->setAttribute("guestport", nr.u16GuestPort);
    }
}


void ConfigFileBase::buildNATLoopbacks(xml::ElementNode &elmParent, const NATLoopbackOffsetList &natLoopbackOffsetList)
{
    for (NATLoopbackOffsetList::const_iterator lo = natLoopbackOffsetList.begin();
         lo != natLoopbackOffsetList.end(); ++lo)
    {
        xml::ElementNode *pelmLo;
        pelmLo = elmParent.createChild("Loopback4");
        pelmLo->setAttribute("address", (*lo).strLoopbackHostAddress);
        pelmLo->setAttribute("offset", (*lo).u32Offset);
    }
}

/**
 * Cleans up memory allocated by the internal XML parser. To be called by
 * descendant classes when they're done analyzing the DOM tree to discard it.
 */
void ConfigFileBase::clearDocument()
{
    m->cleanup();
}

/**
 * Returns true only if the underlying config file exists on disk;
 * either because the file has been loaded from disk, or it's been written
 * to disk, or both.
 * @return
 */
bool ConfigFileBase::fileExists()
{
    return m->fFileExists;
}

/**
 * Returns the settings file version
 *
 * @returns Settings file version enum.
 */
SettingsVersion_T ConfigFileBase::getSettingsVersion()
{
    return m->sv;
}


/**
 * Copies the base variables from another instance. Used by Machine::saveSettings
 * so that the settings version does not get lost when a copy of the Machine settings
 * file is made to see if settings have actually changed.
 * @param b
 */
void ConfigFileBase::copyBaseFrom(const ConfigFileBase &b)
{
    m->copyFrom(*b.m);
}

////////////////////////////////////////////////////////////////////////////////
//
// Structures shared between Machine XML and VirtualBox.xml
//
////////////////////////////////////////////////////////////////////////////////


/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
USBDeviceFilter::USBDeviceFilter() :
    fActive(false),
    action(USBDeviceFilterAction_Null),
    ulMaskedInterfaces(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool USBDeviceFilter::operator==(const USBDeviceFilter &u) const
{
    return (this == &u)
        || (   strName           == u.strName
            && fActive           == u.fActive
            && strVendorId       == u.strVendorId
            && strProductId      == u.strProductId
            && strRevision       == u.strRevision
            && strManufacturer   == u.strManufacturer
            && strProduct        == u.strProduct
            && strSerialNumber   == u.strSerialNumber
            && strPort           == u.strPort
            && action            == u.action
            && strRemote         == u.strRemote
            && ulMaskedInterfaces == u.ulMaskedInterfaces);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
settings::Medium::Medium() :
    fAutoReset(false),
    hdType(MediumType_Normal)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool settings::Medium::operator==(const settings::Medium &m) const
{
    return (this == &m)
        || (   uuid == m.uuid
            && strLocation == m.strLocation
            && strDescription == m.strDescription
            && strFormat == m.strFormat
            && fAutoReset == m.fAutoReset
            && properties == m.properties
            && hdType == m.hdType
            && llChildren == m.llChildren);         // this is deep and recurses
}

const struct settings::Medium settings::Medium::Empty; /* default ctor is OK */

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool MediaRegistry::operator==(const MediaRegistry &m) const
{
    return (this == &m)
        || (   llHardDisks == m.llHardDisks
            && llDvdImages == m.llDvdImages
            && llFloppyImages == m.llFloppyImages);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NATRule::NATRule() :
    proto(NATProtocol_TCP),
    u16HostPort(0),
    u16GuestPort(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool NATRule::operator==(const NATRule &r) const
{
    return (this == &r)
        || (   strName == r.strName
            && proto == r.proto
            && u16HostPort == r.u16HostPort
            && strHostIP == r.strHostIP
            && u16GuestPort == r.u16GuestPort
            && strGuestIP == r.strGuestIP);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NATHostLoopbackOffset::NATHostLoopbackOffset() :
    u32Offset(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool NATHostLoopbackOffset::operator==(const NATHostLoopbackOffset &o) const
{
    return (this == &o)
        || (   strLoopbackHostAddress == o.strLoopbackHostAddress
            && u32Offset == o.u32Offset);
}


////////////////////////////////////////////////////////////////////////////////
//
// VirtualBox.xml structures
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
SystemProperties::SystemProperties()
    : uProxyMode(ProxyMode_System)
    , uLogHistoryCount(3)
    , fExclusiveHwVirt(true)
    , fVBoxUpdateEnabled(true)
    , uVBoxUpdateCount(0)
    , uVBoxUpdateFrequency(1)
    , uVBoxUpdateTarget(VBoxUpdateTarget_Stable)
{
#if defined(RT_OS_DARWIN) || defined(RT_OS_WINDOWS) || defined(RT_OS_SOLARIS)
    fExclusiveHwVirt = false;
#endif
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
DhcpOptValue::DhcpOptValue()
    : strValue()
    , enmEncoding(DHCPOptionEncoding_Normal)
{
}

/**
 * Non-standard constructor.
 */
DhcpOptValue::DhcpOptValue(const com::Utf8Str &aText, DHCPOptionEncoding_T aEncoding)
    : strValue(aText)
    , enmEncoding(aEncoding)
{
}

/**
 * Default constructor.
 */
DHCPGroupCondition::DHCPGroupCondition()
    : fInclusive(true)
    , enmType(DHCPGroupConditionType_MAC)
    , strValue()
{
}

/**
 * Default constructor.
 */
DHCPConfig::DHCPConfig()
    : mapOptions()
    , secMinLeaseTime(0)
    , secDefaultLeaseTime(0)
    , secMaxLeaseTime(0)
{
}

/**
 * Default constructor.
 */
DHCPGroupConfig::DHCPGroupConfig()
    : DHCPConfig()
    , strName()
    , vecConditions()
{
}

/**
 * Default constructor.
 */
DHCPIndividualConfig::DHCPIndividualConfig()
    : DHCPConfig()
    , strMACAddress()
    , strVMName()
    , uSlot(0)
{
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
DHCPServer::DHCPServer()
    : fEnabled(false)
{
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NATNetwork::NATNetwork() :
    fEnabled(true),
    fIPv6Enabled(false),
    fAdvertiseDefaultIPv6Route(false),
    fNeedDhcpServer(true),
    u32HostLoopback6Offset(0)
{
}

#ifdef VBOX_WITH_VMNET
/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
HostOnlyNetwork::HostOnlyNetwork() :
    strNetworkMask("255.255.255.0"),
    strIPLower("192.168.56.1"),
    strIPUpper("192.168.56.199"),
    fEnabled(true)
{
    uuid.create();
}
#endif /* VBOX_WITH_VMNET */

#ifdef VBOX_WITH_CLOUD_NET
/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
CloudNetwork::CloudNetwork() :
    strProviderShortName("OCI"),
    strProfileName("Default"),
    fEnabled(true)
{
}
#endif /* VBOX_WITH_CLOUD_NET */



////////////////////////////////////////////////////////////////////////////////
//
// MainConfigFile
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Reads one \<MachineEntry\> from the main VirtualBox.xml file.
 * @param elmMachineRegistry
 */
void MainConfigFile::readMachineRegistry(const xml::ElementNode &elmMachineRegistry)
{
    // <MachineEntry uuid="{ xxx }" src="   xxx "/>
    xml::NodesLoop nl1(elmMachineRegistry);
    const xml::ElementNode *pelmChild1;
    while ((pelmChild1 = nl1.forAllNodes()))
    {
        if (pelmChild1->nameEquals("MachineEntry"))
        {
            MachineRegistryEntry mre;
            Utf8Str strUUID;
            if (   pelmChild1->getAttributeValue("uuid", strUUID)
                && pelmChild1->getAttributeValue("src", mre.strSettingsFile) )
            {
                parseUUID(mre.uuid, strUUID, pelmChild1);
                llMachines.push_back(mre);
            }
            else
                throw ConfigFileError(this, pelmChild1, N_("Required MachineEntry/@uuid or @src attribute is missing"));
        }
    }
}

/**
 * Builds the XML tree for the DHCP servers.
 */
void MainConfigFile::buildDHCPServers(xml::ElementNode &elmDHCPServers, DHCPServersList const &ll)
{
    for (DHCPServersList::const_iterator it = ll.begin(); it != ll.end(); ++it)
    {
        const DHCPServer &srv = *it;
        xml::ElementNode *pElmThis = elmDHCPServers.createChild("DHCPServer");

        pElmThis->setAttribute("networkName", srv.strNetworkName);
        pElmThis->setAttribute("IPAddress", srv.strIPAddress);
        DhcpOptConstIterator itOpt = srv.globalConfig.mapOptions.find(DHCPOption_SubnetMask);
        if (itOpt != srv.globalConfig.mapOptions.end())
            pElmThis->setAttribute("networkMask", itOpt->second.strValue);
        pElmThis->setAttribute("lowerIP", srv.strIPLower);
        pElmThis->setAttribute("upperIP", srv.strIPUpper);
        pElmThis->setAttribute("enabled", (srv.fEnabled) ? 1 : 0);        // too bad we chose 1 vs. 0 here

        /* We don't want duplicate validation check of networkMask here*/
        if (srv.globalConfig.mapOptions.size() > (itOpt != srv.globalConfig.mapOptions.end() ? 1U : 0U))
        {
            xml::ElementNode *pElmOptions = pElmThis->createChild("Options");
            buildDHCPOptions(*pElmOptions, srv.globalConfig, true);
        }

        for (DHCPGroupConfigVec::const_iterator itGroup = srv.vecGroupConfigs.begin();
             itGroup != srv.vecGroupConfigs.end(); ++itGroup)
        {
            DHCPGroupConfig const &rGroupConfig = *itGroup;

            xml::ElementNode *pElmGroup = pElmThis->createChild("Group");
            pElmGroup->setAttribute("name", rGroupConfig.strName);
            buildDHCPOptions(*pElmGroup, rGroupConfig, false);

            for (DHCPGroupConditionVec::const_iterator itCond = rGroupConfig.vecConditions.begin();
                 itCond != rGroupConfig.vecConditions.end(); ++itCond)
            {
                xml::ElementNode *pElmCondition = pElmGroup->createChild("Condition");
                pElmCondition->setAttribute("inclusive", itCond->fInclusive);
                pElmCondition->setAttribute("type", (int32_t)itCond->enmType);
                pElmCondition->setAttribute("value", itCond->strValue);
            }
        }

        for (DHCPIndividualConfigMap::const_iterator itHost = srv.mapIndividualConfigs.begin();
             itHost != srv.mapIndividualConfigs.end(); ++itHost)
        {
            DHCPIndividualConfig const &rIndividualConfig = itHost->second;

            xml::ElementNode *pElmConfig = pElmThis->createChild("Config");
            if (rIndividualConfig.strMACAddress.isNotEmpty())
                pElmConfig->setAttribute("MACAddress", rIndividualConfig.strMACAddress);
            if (rIndividualConfig.strVMName.isNotEmpty())
                pElmConfig->setAttribute("vm-name", rIndividualConfig.strVMName);
            if (rIndividualConfig.uSlot != 0 || rIndividualConfig.strVMName.isNotEmpty())
                pElmConfig->setAttribute("slot", rIndividualConfig.uSlot);
            if (rIndividualConfig.strFixedAddress.isNotEmpty())
                pElmConfig->setAttribute("fixedAddress", rIndividualConfig.strFixedAddress);
            buildDHCPOptions(*pElmConfig, rIndividualConfig, false);
        }
     }
}

/**
 * Worker for buildDHCPServers() that builds Options or Config element trees.
 */
void MainConfigFile::buildDHCPOptions(xml::ElementNode &elmOptions, DHCPConfig const &rConfig, bool fSkipSubnetMask)
{
    /* Generic (and optional) attributes on the Options or Config element: */
    if (rConfig.secMinLeaseTime > 0)
        elmOptions.setAttribute("secMinLeaseTime", rConfig.secMinLeaseTime);
    if (rConfig.secDefaultLeaseTime > 0)
        elmOptions.setAttribute("secDefaultLeaseTime", rConfig.secDefaultLeaseTime);
    if (rConfig.secMaxLeaseTime > 0)
        elmOptions.setAttribute("secMaxLeaseTime", rConfig.secMaxLeaseTime);
    if (rConfig.strForcedOptions.isNotEmpty())
        elmOptions.setAttribute("forcedOptions", rConfig.strForcedOptions);
    if (rConfig.strSuppressedOptions.isNotEmpty())
        elmOptions.setAttribute("suppressedOptions", rConfig.strSuppressedOptions);

    /* The DHCP options are <Option> child elements: */
    for (DhcpOptConstIterator it = rConfig.mapOptions.begin(); it != rConfig.mapOptions.end(); ++it)
        if (it->first != DHCPOption_SubnetMask || !fSkipSubnetMask)
        {
            xml::ElementNode *pElmOption = elmOptions.createChild("Option");
            pElmOption->setAttribute("name", it->first);
            pElmOption->setAttribute("value", it->second.strValue);
            if (it->second.enmEncoding != DHCPOptionEncoding_Normal)
                pElmOption->setAttribute("encoding", (int32_t)it->second.enmEncoding);
        }
}

/**
 * Reads in the \<DHCPServers\> chunk.
 * @param elmDHCPServers
 */
void MainConfigFile::readDHCPServers(const xml::ElementNode &elmDHCPServers)
{
    xml::NodesLoop nl1(elmDHCPServers);
    const xml::ElementNode *pelmServer;
    while ((pelmServer = nl1.forAllNodes()))
    {
        if (pelmServer->nameEquals("DHCPServer"))
        {
            DHCPServer srv;
            if (   pelmServer->getAttributeValue("networkName", srv.strNetworkName)
                && pelmServer->getAttributeValue("IPAddress", srv.strIPAddress)
                && pelmServer->getAttributeValue("networkMask", srv.globalConfig.mapOptions[DHCPOption_SubnetMask].strValue)
                && pelmServer->getAttributeValue("lowerIP", srv.strIPLower)
                && pelmServer->getAttributeValue("upperIP", srv.strIPUpper)
                && pelmServer->getAttributeValue("enabled", srv.fEnabled) )
            {
                /* Global options: */
                const xml::ElementNode *pElmOptions;
                xml::NodesLoop          nlOptions(*pelmServer, "Options");
                while ((pElmOptions = nlOptions.forAllNodes()) != NULL) /** @todo this loop makes no sense, there can only be one \<Options\> child. */
                    readDHCPOptions(srv.globalConfig, *pElmOptions, true /*fIgnoreSubnetMask*/);

                /* Group configurations: */
                xml::NodesLoop nlGroup(*pelmServer, "Group");
                const xml::ElementNode *pElmGroup;
                size_t i = 0;
                while ((pElmGroup = nlGroup.forAllNodes()) != NULL)
                {
                    srv.vecGroupConfigs.push_back(DHCPGroupConfig());
                    DHCPGroupConfig &rGroupConfig = srv.vecGroupConfigs.back();

                    if (!pElmGroup->getAttributeValue("name", rGroupConfig.strName))
                        rGroupConfig.strName.printf("Unamed Group #%u", ++i);

                    readDHCPOptions(rGroupConfig, *pElmGroup, false /*fIgnoreSubnetMask*/);

                    xml::NodesLoop nlCondition(*pElmGroup, "Condition");
                    const xml::ElementNode *pElmCondition;
                    while ((pElmCondition = nlCondition.forAllNodes()) != NULL)
                    {
                        rGroupConfig.vecConditions.push_back(DHCPGroupCondition());
                        DHCPGroupCondition &rGroupCondition = rGroupConfig.vecConditions.back();

                        if (!pElmCondition->getAttributeValue("inclusive", rGroupCondition.fInclusive))
                            rGroupCondition.fInclusive = true;

                        int32_t iType;
                        if (!pElmCondition->getAttributeValue("type", iType))
                            iType = DHCPGroupConditionType_MAC;
                        rGroupCondition.enmType = (DHCPGroupConditionType_T)iType;

                        pElmCondition->getAttributeValue("value", rGroupCondition.strValue);
                    }
                }

                /* host specific configuration: */
                xml::NodesLoop nlConfig(*pelmServer, "Config");
                const xml::ElementNode *pElmConfig;
                while ((pElmConfig = nlConfig.forAllNodes()) != NULL)
                {
                    com::Utf8Str strMACAddress;
                    if (!pElmConfig->getAttributeValue("MACAddress", strMACAddress))
                        strMACAddress.setNull();

                    com::Utf8Str strVMName;
                    if (!pElmConfig->getAttributeValue("vm-name", strVMName))
                        strVMName.setNull();

                    uint32_t uSlot;
                    if (!pElmConfig->getAttributeValue("slot", uSlot))
                        uSlot = 0;

                    com::Utf8Str strKey;
                    if (strVMName.isNotEmpty())
                        strKey.printf("%s/%u", strVMName.c_str(), uSlot);
                    else
                        strKey.printf("%s/%u", strMACAddress.c_str(), uSlot);

                    DHCPIndividualConfig &rIndividualConfig = srv.mapIndividualConfigs[strKey];
                    rIndividualConfig.strMACAddress = strMACAddress;
                    rIndividualConfig.strVMName     = strVMName;
                    rIndividualConfig.uSlot         = uSlot;
                    pElmConfig->getAttributeValue("fixedAddress", rIndividualConfig.strFixedAddress);

                    readDHCPOptions(rIndividualConfig, *pElmConfig, false /*fIgnoreSubnetMask*/);
                }

                llDhcpServers.push_back(srv);
            }
            else
                throw ConfigFileError(this, pelmServer, N_("Required DHCPServer/@networkName, @IPAddress, @networkMask, @lowerIP, @upperIP or @enabled attribute is missing"));
        }
    }
}

/**
 * Worker for readDHCPServers that reads a configuration, either global,
 * group or host (VM+NIC) specific.
 */
void MainConfigFile::readDHCPOptions(DHCPConfig &rConfig, const xml::ElementNode &elmConfig, bool fIgnoreSubnetMask)
{
    /* Generic (and optional) attributes on the Options or Config element: */
    if (!elmConfig.getAttributeValue("secMinLeaseTime", rConfig.secMinLeaseTime))
        rConfig.secMinLeaseTime = 0;
    if (!elmConfig.getAttributeValue("secDefaultLeaseTime", rConfig.secDefaultLeaseTime))
        rConfig.secDefaultLeaseTime = 0;
    if (!elmConfig.getAttributeValue("secMaxLeaseTime", rConfig.secMaxLeaseTime))
        rConfig.secMaxLeaseTime = 0;
    if (!elmConfig.getAttributeValue("forcedOptions", rConfig.strForcedOptions))
        rConfig.strSuppressedOptions.setNull();
    if (!elmConfig.getAttributeValue("suppressedOptions", rConfig.strSuppressedOptions))
        rConfig.strSuppressedOptions.setNull();

    /* The DHCP options are <Option> child elements: */
    xml::NodesLoop          nl2(elmConfig, "Option");
    const xml::ElementNode *pElmOption;
    while ((pElmOption = nl2.forAllNodes()) != NULL)
    {
        int32_t iOptName;
        if (!pElmOption->getAttributeValue("name", iOptName))
            continue;
        DHCPOption_T OptName = (DHCPOption_T)iOptName;
        if (OptName == DHCPOption_SubnetMask && fIgnoreSubnetMask)
            continue;

        com::Utf8Str strValue;
        pElmOption->getAttributeValue("value", strValue);

        int32_t iOptEnc;
        if (!pElmOption->getAttributeValue("encoding", iOptEnc))
            iOptEnc = DHCPOptionEncoding_Normal;

        rConfig.mapOptions[OptName] = DhcpOptValue(strValue, (DHCPOptionEncoding_T)iOptEnc);
    } /* end of forall("Option") */

}

/**
 * Reads in the \<NATNetworks\> chunk.
 * @param elmNATNetworks
 */
void MainConfigFile::readNATNetworks(const xml::ElementNode &elmNATNetworks)
{
    xml::NodesLoop nl1(elmNATNetworks);
    const xml::ElementNode *pelmNet;
    while ((pelmNet = nl1.forAllNodes()))
    {
        if (pelmNet->nameEquals("NATNetwork"))
        {
            NATNetwork net;
            if (   pelmNet->getAttributeValue("networkName", net.strNetworkName)
                && pelmNet->getAttributeValue("enabled", net.fEnabled)
                && pelmNet->getAttributeValue("network", net.strIPv4NetworkCidr)
                && pelmNet->getAttributeValue("ipv6", net.fIPv6Enabled)
                && pelmNet->getAttributeValue("ipv6prefix", net.strIPv6Prefix)
                && pelmNet->getAttributeValue("advertiseDefaultIPv6Route", net.fAdvertiseDefaultIPv6Route)
                && pelmNet->getAttributeValue("needDhcp", net.fNeedDhcpServer) )
            {
                pelmNet->getAttributeValue("loopback6", net.u32HostLoopback6Offset);
                const xml::ElementNode *pelmMappings;
                if ((pelmMappings = pelmNet->findChildElement("Mappings")))
                    readNATLoopbacks(*pelmMappings, net.llHostLoopbackOffsetList);

                const xml::ElementNode *pelmPortForwardRules4;
                if ((pelmPortForwardRules4 = pelmNet->findChildElement("PortForwarding4")))
                    readNATForwardRulesMap(*pelmPortForwardRules4,
                                           net.mapPortForwardRules4);

                const xml::ElementNode *pelmPortForwardRules6;
                if ((pelmPortForwardRules6 = pelmNet->findChildElement("PortForwarding6")))
                    readNATForwardRulesMap(*pelmPortForwardRules6,
                                           net.mapPortForwardRules6);

                llNATNetworks.push_back(net);
            }
            else
                throw ConfigFileError(this, pelmNet, N_("Required NATNetwork/@networkName, @gateway, @network,@advertiseDefaultIpv6Route , @needDhcp or @enabled attribute is missing"));
        }
    }
}

#ifdef VBOX_WITH_VMNET
/**
 * Reads in the \<HostOnlyNetworks\> chunk.
 * @param elmHostOnlyNetworks
 */
void MainConfigFile::readHostOnlyNetworks(const xml::ElementNode &elmHostOnlyNetworks)
{
    xml::NodesLoop nl1(elmHostOnlyNetworks);
    const xml::ElementNode *pelmNet;
    while ((pelmNet = nl1.forAllNodes()))
    {
        if (pelmNet->nameEquals("HostOnlyNetwork"))
        {
            HostOnlyNetwork net;
            Utf8Str strID;
            if (   pelmNet->getAttributeValue("name", net.strNetworkName)
                && pelmNet->getAttributeValue("mask", net.strNetworkMask)
                && pelmNet->getAttributeValue("ipLower", net.strIPLower)
                && pelmNet->getAttributeValue("ipUpper", net.strIPUpper)
                && pelmNet->getAttributeValue("id", strID)
                && pelmNet->getAttributeValue("enabled", net.fEnabled) )
            {
                parseUUID(net.uuid, strID, pelmNet);
                llHostOnlyNetworks.push_back(net);
            }
            else
                throw ConfigFileError(this, pelmNet, N_("Required HostOnlyNetwork/@name, @mask, @ipLower, @ipUpper, @id or @enabled attribute is missing"));
        }
    }
}
#endif /* VBOX_WITH_VMNET */

#ifdef VBOX_WITH_CLOUD_NET
/**
 * Reads in the \<CloudNetworks\> chunk.
 * @param elmCloudNetworks
 */
void MainConfigFile::readCloudNetworks(const xml::ElementNode &elmCloudNetworks)
{
    xml::NodesLoop nl1(elmCloudNetworks);
    const xml::ElementNode *pelmNet;
    while ((pelmNet = nl1.forAllNodes()))
    {
        if (pelmNet->nameEquals("CloudNetwork"))
        {
            CloudNetwork net;
            if (   pelmNet->getAttributeValue("name", net.strNetworkName)
                && pelmNet->getAttributeValue("provider", net.strProviderShortName)
                && pelmNet->getAttributeValue("profile", net.strProfileName)
                && pelmNet->getAttributeValue("id", net.strNetworkId)
                && pelmNet->getAttributeValue("enabled", net.fEnabled) )
            {
                llCloudNetworks.push_back(net);
            }
            else
                throw ConfigFileError(this, pelmNet, N_("Required CloudNetwork/@name, @provider, @profile, @id or @enabled attribute is missing"));
        }
    }
}
#endif /* VBOX_WITH_CLOUD_NET */

/**
 * Creates \<USBDeviceSource\> nodes under the given parent element according to
 * the contents of the given USBDeviceSourcesList.
 *
 * @param elmParent
 * @param ll
 */
void MainConfigFile::buildUSBDeviceSources(xml::ElementNode &elmParent,
                                           const USBDeviceSourcesList &ll)
{
    for (USBDeviceSourcesList::const_iterator it = ll.begin();
         it != ll.end();
         ++it)
    {
        const USBDeviceSource &src = *it;
        xml::ElementNode *pelmSource = elmParent.createChild("USBDeviceSource");
        pelmSource->setAttribute("name", src.strName);
        pelmSource->setAttribute("backend", src.strBackend);
        pelmSource->setAttribute("address", src.strAddress);

        /* Write the properties. */
        for (StringsMap::const_iterator itProp = src.properties.begin();
             itProp != src.properties.end();
             ++itProp)
        {
            xml::ElementNode *pelmProp = pelmSource->createChild("Property");
            pelmProp->setAttribute("name", itProp->first);
            pelmProp->setAttribute("value", itProp->second);
        }
    }
}

/**
 * Reads \<USBDeviceFilter\> entries from under the given elmDeviceFilters node and
 * stores them in the given linklist. This is in ConfigFileBase because it's used
 * from both MainConfigFile (for host filters) and MachineConfigFile (for machine
 * filters).
 * @param elmDeviceSources
 * @param ll
 */
void MainConfigFile::readUSBDeviceSources(const xml::ElementNode &elmDeviceSources,
                                          USBDeviceSourcesList &ll)
{
    xml::NodesLoop nl1(elmDeviceSources, "USBDeviceSource");
    const xml::ElementNode *pelmChild;
    while ((pelmChild = nl1.forAllNodes()))
    {
        USBDeviceSource src;

        if (   pelmChild->getAttributeValue("name", src.strName)
            && pelmChild->getAttributeValue("backend", src.strBackend)
            && pelmChild->getAttributeValue("address", src.strAddress))
        {
            // handle medium properties
            xml::NodesLoop nl2(*pelmChild, "Property");
            const xml::ElementNode *pelmSrcChild;
            while ((pelmSrcChild = nl2.forAllNodes()))
            {
                Utf8Str strPropName, strPropValue;
                if (   pelmSrcChild->getAttributeValue("name", strPropName)
                    && pelmSrcChild->getAttributeValue("value", strPropValue) )
                    src.properties[strPropName] = strPropValue;
                else
                    throw ConfigFileError(this, pelmSrcChild, N_("Required USBDeviceSource/Property/@name or @value attribute is missing"));
            }

            ll.push_back(src);
        }
    }
}

/**
 * Converts old style Proxy settings from ExtraData/UI section.
 *
 * Saves proxy settings directly to systemProperties structure.
 *
 * @returns true if conversion was successfull, false if not.
 * @param strUIProxySettings The GUI settings string to convert.
 */
bool MainConfigFile::convertGuiProxySettings(const com::Utf8Str &strUIProxySettings)
{
    /*
     * Possible variants:
     *    - "ProxyAuto,proxyserver.url,1080,authDisabled,,"
     *    - "ProxyDisabled,proxyserver.url,1080,authDisabled,,"
     *    - "ProxyEnabled,proxyserver.url,1080,authDisabled,,"
     *
     * Note! We only need to bother with the first three fields as the last
     *       three was never really used or ever actually passed to the HTTP
     *       client code.
     */
    /* First field: The proxy mode. */
    const char *psz = RTStrStripL(strUIProxySettings.c_str());
    static const struct { const char *psz; size_t cch; ProxyMode_T enmMode; } s_aModes[] =
    {
        { RT_STR_TUPLE("ProxyAuto"),     ProxyMode_System },
        { RT_STR_TUPLE("ProxyDisabled"), ProxyMode_NoProxy },
        { RT_STR_TUPLE("ProxyEnabled"),  ProxyMode_Manual },
    };
    for (size_t i = 0; i < RT_ELEMENTS(s_aModes); i++)
        if (RTStrNICmpAscii(psz, s_aModes[i].psz, s_aModes[i].cch) == 0)
        {
            systemProperties.uProxyMode = s_aModes[i].enmMode;
            psz = RTStrStripL(psz + s_aModes[i].cch);
            if (*psz == ',')
            {
                /* Second field: The proxy host, possibly fully fledged proxy URL. */
                psz = RTStrStripL(psz + 1);
                if (*psz != '\0' && *psz != ',')
                {
                    const char *pszEnd  = strchr(psz, ',');
                    size_t      cchHost = pszEnd ? (size_t)(pszEnd - psz) : strlen(psz);
                    while (cchHost > 0 && RT_C_IS_SPACE(psz[cchHost - 1]))
                        cchHost--;
                    systemProperties.strProxyUrl.assign(psz, cchHost);
                    if (systemProperties.strProxyUrl.find("://") == RTCString::npos)
                        systemProperties.strProxyUrl.replace(0, 0, "http://");

                    /* Third field: The proxy port. Defaulted to 1080 for all proxies.
                                    The new settings has type specific default ports.  */
                    uint16_t uPort = 1080;
                    if (pszEnd)
                    {
                        int rc = RTStrToUInt16Ex(RTStrStripL(pszEnd + 1), NULL, 10, &uPort);
                        if (RT_FAILURE(rc))
                            uPort = 1080;
                    }
                    RTURIPARSED Parsed;
                    int rc = RTUriParse(systemProperties.strProxyUrl.c_str(), &Parsed);
                    if (RT_SUCCESS(rc))
                    {
                        if (Parsed.uAuthorityPort == UINT32_MAX)
                            systemProperties.strProxyUrl.appendPrintf(systemProperties.strProxyUrl.endsWith(":")
                                                                      ? "%u" : ":%u", uPort);
                    }
                    else
                    {
                        LogRelFunc(("Dropping invalid proxy URL for %u: %s\n",
                                    systemProperties.uProxyMode, systemProperties.strProxyUrl.c_str()));
                        systemProperties.strProxyUrl.setNull();
                    }
                }
                /* else: don't bother with the rest if we haven't got a host. */
            }
            if (   systemProperties.strProxyUrl.isEmpty()
                && systemProperties.uProxyMode == ProxyMode_Manual)
            {
                systemProperties.uProxyMode = ProxyMode_System;
                return false;
            }
            return true;
        }
    LogRelFunc(("Unknown proxy type: %s\n", psz));
    return false;
}

/**
 * Constructor.
 *
 * If pstrFilename is != NULL, this reads the given settings file into the member
 * variables and various substructures and lists. Otherwise, the member variables
 * are initialized with default values.
 *
 * Throws variants of xml::Error for I/O, XML and logical content errors, which
 * the caller should catch; if this constructor does not throw, then the member
 * variables contain meaningful values (either from the file or defaults).
 *
 * @param pstrFilename
 */
MainConfigFile::MainConfigFile(const Utf8Str *pstrFilename)
    : ConfigFileBase(pstrFilename)
{
    if (pstrFilename)
    {
        // the ConfigFileBase constructor has loaded the XML file, so now
        // we need only analyze what is in there
        xml::NodesLoop nlRootChildren(*m->pelmRoot);
        const xml::ElementNode *pelmRootChild;
        bool fCopyProxySettingsFromExtraData = false;
        while ((pelmRootChild = nlRootChildren.forAllNodes()))
        {
            if (pelmRootChild->nameEquals("Global"))
            {
                xml::NodesLoop nlGlobalChildren(*pelmRootChild);
                const xml::ElementNode *pelmGlobalChild;
                while ((pelmGlobalChild = nlGlobalChildren.forAllNodes()))
                {
                    if (pelmGlobalChild->nameEquals("SystemProperties"))
                    {
                        pelmGlobalChild->getAttributeValue("defaultMachineFolder", systemProperties.strDefaultMachineFolder);
                        pelmGlobalChild->getAttributeValue("LoggingLevel", systemProperties.strLoggingLevel);
                        pelmGlobalChild->getAttributeValue("defaultHardDiskFormat", systemProperties.strDefaultHardDiskFormat);
                        if (!pelmGlobalChild->getAttributeValue("VRDEAuthLibrary", systemProperties.strVRDEAuthLibrary))
                            // pre-1.11 used @remoteDisplayAuthLibrary instead
                            pelmGlobalChild->getAttributeValue("remoteDisplayAuthLibrary", systemProperties.strVRDEAuthLibrary);
                        pelmGlobalChild->getAttributeValue("webServiceAuthLibrary", systemProperties.strWebServiceAuthLibrary);
                        pelmGlobalChild->getAttributeValue("defaultVRDEExtPack", systemProperties.strDefaultVRDEExtPack);
                        pelmGlobalChild->getAttributeValue("LogHistoryCount", systemProperties.uLogHistoryCount);
                        pelmGlobalChild->getAttributeValue("autostartDatabasePath", systemProperties.strAutostartDatabasePath);
                        pelmGlobalChild->getAttributeValue("defaultFrontend", systemProperties.strDefaultFrontend);
                        pelmGlobalChild->getAttributeValue("exclusiveHwVirt", systemProperties.fExclusiveHwVirt);
                        if (!pelmGlobalChild->getAttributeValue("proxyMode", systemProperties.uProxyMode))
                            fCopyProxySettingsFromExtraData = true;
                        pelmGlobalChild->getAttributeValue("proxyUrl", systemProperties.strProxyUrl);
                        pelmGlobalChild->getAttributeValue("VBoxUpdateEnabled", systemProperties.fVBoxUpdateEnabled);
                        pelmGlobalChild->getAttributeValue("VBoxUpdateCount", systemProperties.uVBoxUpdateCount);
                        pelmGlobalChild->getAttributeValue("VBoxUpdateFrequency", systemProperties.uVBoxUpdateFrequency);
                        pelmGlobalChild->getAttributeValue("VBoxUpdateTarget", systemProperties.uVBoxUpdateTarget);
                        pelmGlobalChild->getAttributeValue("VBoxUpdateLastCheckDate",
                            systemProperties.strVBoxUpdateLastCheckDate);
                        pelmGlobalChild->getAttributeValue("LanguageId", systemProperties.strLanguageId);
                    }
                    else if (pelmGlobalChild->nameEquals("ExtraData"))
                        readExtraData(*pelmGlobalChild, mapExtraDataItems);
                    else if (pelmGlobalChild->nameEquals("MachineRegistry"))
                        readMachineRegistry(*pelmGlobalChild);
                    else if (    (pelmGlobalChild->nameEquals("MediaRegistry"))
                              || (    (m->sv < SettingsVersion_v1_4)
                                   && (pelmGlobalChild->nameEquals("DiskRegistry"))
                                 )
                            )
                        readMediaRegistry(*pelmGlobalChild, mediaRegistry);
                    else if (pelmGlobalChild->nameEquals("NetserviceRegistry"))
                    {
                        xml::NodesLoop nlLevel4(*pelmGlobalChild);
                        const xml::ElementNode *pelmLevel4Child;
                        while ((pelmLevel4Child = nlLevel4.forAllNodes()))
                        {
                            if (pelmLevel4Child->nameEquals("DHCPServers"))
                                readDHCPServers(*pelmLevel4Child);
                            if (pelmLevel4Child->nameEquals("NATNetworks"))
                                readNATNetworks(*pelmLevel4Child);
#ifdef VBOX_WITH_VMNET
                            if (pelmLevel4Child->nameEquals("HostOnlyNetworks"))
                                readHostOnlyNetworks(*pelmLevel4Child);
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
                            if (pelmLevel4Child->nameEquals("CloudNetworks"))
                                readCloudNetworks(*pelmLevel4Child);
#endif /* VBOX_WITH_CLOUD_NET */
                        }
                    }
                    else if (pelmGlobalChild->nameEquals("USBDeviceFilters"))
                        readUSBDeviceFilters(*pelmGlobalChild, host.llUSBDeviceFilters);
                    else if (pelmGlobalChild->nameEquals("USBDeviceSources"))
                        readUSBDeviceSources(*pelmGlobalChild, host.llUSBDeviceSources);
                }
            } // end if (pelmRootChild->nameEquals("Global"))
        }

        if (fCopyProxySettingsFromExtraData)
            for (StringsMap::const_iterator it = mapExtraDataItems.begin(); it != mapExtraDataItems.end(); ++it)
                if (it->first.equals("GUI/ProxySettings"))
                {
                    convertGuiProxySettings(it->second);
                    break;
                }

        clearDocument();
    }

    // DHCP servers were introduced with settings version 1.7; if we're loading
    // from an older version OR this is a fresh install, then add one DHCP server
    // with default settings
    if (    (!llDhcpServers.size())
         && (    (!pstrFilename)                    // empty VirtualBox.xml file
              || (m->sv < SettingsVersion_v1_7)     // upgrading from before 1.7
            )
       )
    {
        DHCPServer srv;
#ifdef RT_OS_WINDOWS
        srv.strNetworkName = "HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter";
#else
        srv.strNetworkName = "HostInterfaceNetworking-vboxnet0";
#endif
        srv.strIPAddress = "192.168.56.100";
        srv.globalConfig.mapOptions[DHCPOption_SubnetMask] = DhcpOptValue("255.255.255.0");
        srv.strIPLower = "192.168.56.101";
        srv.strIPUpper = "192.168.56.254";
        srv.fEnabled = true;
        llDhcpServers.push_back(srv);
    }
}

void MainConfigFile::bumpSettingsVersionIfNeeded()
{
#ifdef VBOX_WITH_VMNET
    if (m->sv < SettingsVersion_v1_19)
    {
        // VirtualBox 7.0 adds support for host-only networks.
        if (!llHostOnlyNetworks.empty())
            m->sv = SettingsVersion_v1_19;
    }
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
    if (m->sv < SettingsVersion_v1_18)
    {
        // VirtualBox 6.1 adds support for cloud networks.
        if (!llCloudNetworks.empty())
            m->sv = SettingsVersion_v1_18;
    }
#endif /* VBOX_WITH_CLOUD_NET */

    if (m->sv < SettingsVersion_v1_16)
    {
        // VirtualBox 5.1 add support for additional USB device sources.
        if (!host.llUSBDeviceSources.empty())
            m->sv = SettingsVersion_v1_16;
    }

    if (m->sv < SettingsVersion_v1_14)
    {
        // VirtualBox 4.3 adds NAT networks.
        if (   !llNATNetworks.empty())
            m->sv = SettingsVersion_v1_14;
    }
}


/**
 * Called from the IVirtualBox interface to write out VirtualBox.xml. This
 * builds an XML DOM tree and writes it out to disk.
 */
void MainConfigFile::write(const com::Utf8Str strFilename)
{
    bumpSettingsVersionIfNeeded();

    m->strFilename = strFilename;
    specialBackupIfFirstBump();
    createStubDocument();

    xml::ElementNode *pelmGlobal = m->pelmRoot->createChild("Global");

    buildExtraData(*pelmGlobal, mapExtraDataItems);

    xml::ElementNode *pelmMachineRegistry = pelmGlobal->createChild("MachineRegistry");
    for (MachinesRegistry::const_iterator it = llMachines.begin();
         it != llMachines.end();
         ++it)
    {
        // <MachineEntry uuid="{5f102a55-a51b-48e3-b45a-b28d33469488}" src="/mnt/innotek-unix/vbox-machines/Windows 5.1 XP 1 (Office 2003)/Windows 5.1 XP 1 (Office 2003).xml"/>
        const MachineRegistryEntry &mre = *it;
        xml::ElementNode *pelmMachineEntry = pelmMachineRegistry->createChild("MachineEntry");
        pelmMachineEntry->setAttribute("uuid", mre.uuid.toStringCurly());
        pelmMachineEntry->setAttribute("src", mre.strSettingsFile);
    }

    buildMediaRegistry(*pelmGlobal, mediaRegistry);

    xml::ElementNode *pelmNetServiceRegistry = pelmGlobal->createChild("NetserviceRegistry"); /** @todo r=bird: wrong capitalization of NetServiceRegistry. sigh. */
    buildDHCPServers(*pelmNetServiceRegistry->createChild("DHCPServers"), llDhcpServers);

    xml::ElementNode *pelmNATNetworks;
    /* don't create entry if no NAT networks are registered. */
    if (!llNATNetworks.empty())
    {
        pelmNATNetworks = pelmNetServiceRegistry->createChild("NATNetworks");
        for (NATNetworksList::const_iterator it = llNATNetworks.begin();
             it != llNATNetworks.end();
             ++it)
        {
            const NATNetwork &n = *it;
            xml::ElementNode *pelmThis = pelmNATNetworks->createChild("NATNetwork");
            pelmThis->setAttribute("networkName", n.strNetworkName);
            pelmThis->setAttribute("network", n.strIPv4NetworkCidr);
            pelmThis->setAttribute("ipv6", n.fIPv6Enabled ? 1 : 0);
            pelmThis->setAttribute("ipv6prefix", n.strIPv6Prefix);
            pelmThis->setAttribute("advertiseDefaultIPv6Route", (n.fAdvertiseDefaultIPv6Route)? 1 : 0);
            pelmThis->setAttribute("needDhcp", (n.fNeedDhcpServer) ? 1 : 0);
            pelmThis->setAttribute("enabled", (n.fEnabled) ? 1 : 0);        // too bad we chose 1 vs. 0 here
            if (n.mapPortForwardRules4.size())
            {
                xml::ElementNode *pelmPf4 = pelmThis->createChild("PortForwarding4");
                buildNATForwardRulesMap(*pelmPf4, n.mapPortForwardRules4);
            }
            if (n.mapPortForwardRules6.size())
            {
                xml::ElementNode *pelmPf6 = pelmThis->createChild("PortForwarding6");
                buildNATForwardRulesMap(*pelmPf6, n.mapPortForwardRules6);
            }

            if (n.llHostLoopbackOffsetList.size())
            {
                xml::ElementNode *pelmMappings = pelmThis->createChild("Mappings");
                buildNATLoopbacks(*pelmMappings, n.llHostLoopbackOffsetList);

            }
        }
    }

#ifdef VBOX_WITH_VMNET
    xml::ElementNode *pelmHostOnlyNetworks;
    /* don't create entry if no HostOnly networks are registered. */
    if (!llHostOnlyNetworks.empty())
    {
        pelmHostOnlyNetworks = pelmNetServiceRegistry->createChild("HostOnlyNetworks");
        for (HostOnlyNetworksList::const_iterator it = llHostOnlyNetworks.begin();
             it != llHostOnlyNetworks.end();
             ++it)
        {
            const HostOnlyNetwork &n = *it;
            xml::ElementNode *pelmThis = pelmHostOnlyNetworks->createChild("HostOnlyNetwork");
            pelmThis->setAttribute("name", n.strNetworkName);
            pelmThis->setAttribute("mask", n.strNetworkMask);
            pelmThis->setAttribute("ipLower", n.strIPLower);
            pelmThis->setAttribute("ipUpper", n.strIPUpper);
            pelmThis->setAttribute("id", n.uuid.toStringCurly());
            pelmThis->setAttribute("enabled", (n.fEnabled) ? 1 : 0);        // too bad we chose 1 vs. 0 here
        }
    }
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
    xml::ElementNode *pelmCloudNetworks;
    /* don't create entry if no cloud networks are registered. */
    if (!llCloudNetworks.empty())
    {
        pelmCloudNetworks = pelmNetServiceRegistry->createChild("CloudNetworks");
        for (CloudNetworksList::const_iterator it = llCloudNetworks.begin();
             it != llCloudNetworks.end();
             ++it)
        {
            const CloudNetwork &n = *it;
            xml::ElementNode *pelmThis = pelmCloudNetworks->createChild("CloudNetwork");
            pelmThis->setAttribute("name", n.strNetworkName);
            pelmThis->setAttribute("provider", n.strProviderShortName);
            pelmThis->setAttribute("profile", n.strProfileName);
            pelmThis->setAttribute("id", n.strNetworkId);
            pelmThis->setAttribute("enabled", (n.fEnabled) ? 1 : 0);        // too bad we chose 1 vs. 0 here
        }
    }
#endif /* VBOX_WITH_CLOUD_NET */


    xml::ElementNode *pelmSysProps = pelmGlobal->createChild("SystemProperties");
    if (systemProperties.strDefaultMachineFolder.length())
        pelmSysProps->setAttribute("defaultMachineFolder", systemProperties.strDefaultMachineFolder);
    if (systemProperties.strLoggingLevel.length())
        pelmSysProps->setAttribute("LoggingLevel", systemProperties.strLoggingLevel);
    if (systemProperties.strDefaultHardDiskFormat.length())
        pelmSysProps->setAttribute("defaultHardDiskFormat", systemProperties.strDefaultHardDiskFormat);
    if (systemProperties.strVRDEAuthLibrary.length())
        pelmSysProps->setAttribute("VRDEAuthLibrary", systemProperties.strVRDEAuthLibrary);
    if (systemProperties.strWebServiceAuthLibrary.length())
        pelmSysProps->setAttribute("webServiceAuthLibrary", systemProperties.strWebServiceAuthLibrary);
    if (systemProperties.strDefaultVRDEExtPack.length())
        pelmSysProps->setAttribute("defaultVRDEExtPack", systemProperties.strDefaultVRDEExtPack);
    pelmSysProps->setAttribute("LogHistoryCount", systemProperties.uLogHistoryCount);
    if (systemProperties.strAutostartDatabasePath.length())
        pelmSysProps->setAttribute("autostartDatabasePath", systemProperties.strAutostartDatabasePath);
    if (systemProperties.strDefaultFrontend.length())
        pelmSysProps->setAttribute("defaultFrontend", systemProperties.strDefaultFrontend);
    if (systemProperties.strProxyUrl.length())
        pelmSysProps->setAttribute("proxyUrl", systemProperties.strProxyUrl);
    pelmSysProps->setAttribute("proxyMode", systemProperties.uProxyMode);
    pelmSysProps->setAttribute("exclusiveHwVirt", systemProperties.fExclusiveHwVirt);
    pelmSysProps->setAttribute("VBoxUpdateEnabled", systemProperties.fVBoxUpdateEnabled);
    pelmSysProps->setAttribute("VBoxUpdateCount", systemProperties.uVBoxUpdateCount);
    pelmSysProps->setAttribute("VBoxUpdateFrequency", systemProperties.uVBoxUpdateFrequency);
    pelmSysProps->setAttribute("VBoxUpdateTarget", systemProperties.uVBoxUpdateTarget);
    if (systemProperties.strVBoxUpdateLastCheckDate.length())
        pelmSysProps->setAttribute("VBoxUpdateLastCheckDate", systemProperties.strVBoxUpdateLastCheckDate);
    if (systemProperties.strLanguageId.isNotEmpty())
        pelmSysProps->setAttribute("LanguageId", systemProperties.strLanguageId);

    buildUSBDeviceFilters(*pelmGlobal->createChild("USBDeviceFilters"),
                          host.llUSBDeviceFilters,
                          true);               // fHostMode

    if (!host.llUSBDeviceSources.empty())
        buildUSBDeviceSources(*pelmGlobal->createChild("USBDeviceSources"),
                              host.llUSBDeviceSources);

    // now go write the XML
    xml::XmlFileWriter writer(*m->pDoc);
    writer.write(m->strFilename.c_str(), true /*fSafe*/);

    m->fFileExists = true;

    clearDocument();
}

////////////////////////////////////////////////////////////////////////////////
//
// Machine XML structures
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
VRDESettings::VRDESettings() :
    fEnabled(true), // default for old VMs, for new ones it's false
    authType(AuthType_Null),
    ulAuthTimeout(5000),
    fAllowMultiConnection(false),
    fReuseSingleConnection(false)
{
}

/**
 * Check if all settings have default values.
 */
bool VRDESettings::areDefaultSettings(SettingsVersion_T sv) const
{
    return (sv < SettingsVersion_v1_16 ? fEnabled : !fEnabled)
        && authType == AuthType_Null
        && (ulAuthTimeout == 5000 || ulAuthTimeout == 0)
        && strAuthLibrary.isEmpty()
        && !fAllowMultiConnection
        && !fReuseSingleConnection
        && strVrdeExtPack.isEmpty()
        && mapProperties.size() == 0;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool VRDESettings::operator==(const VRDESettings& v) const
{
    return (this == &v)
        || (   fEnabled                  == v.fEnabled
            && authType                  == v.authType
            && ulAuthTimeout             == v.ulAuthTimeout
            && strAuthLibrary            == v.strAuthLibrary
            && fAllowMultiConnection     == v.fAllowMultiConnection
            && fReuseSingleConnection    == v.fReuseSingleConnection
            && strVrdeExtPack            == v.strVrdeExtPack
            && mapProperties             == v.mapProperties);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
BIOSSettings::BIOSSettings() :
    fACPIEnabled(true),
    fIOAPICEnabled(false),
    fLogoFadeIn(true),
    fLogoFadeOut(true),
    fPXEDebugEnabled(false),
    fSmbiosUuidLittleEndian(true),
    ulLogoDisplayTime(0),
    biosBootMenuMode(BIOSBootMenuMode_MessageAndMenu),
    apicMode(APICMode_APIC),
    llTimeOffset(0)
{
}

/**
 * Check if all settings have default values.
 */
bool BIOSSettings::areDefaultSettings() const
{
    return fACPIEnabled
        && !fIOAPICEnabled
        && fLogoFadeIn
        && fLogoFadeOut
        && !fPXEDebugEnabled
        && !fSmbiosUuidLittleEndian
        && ulLogoDisplayTime == 0
        && biosBootMenuMode == BIOSBootMenuMode_MessageAndMenu
        && apicMode == APICMode_APIC
        && llTimeOffset == 0
        && strLogoImagePath.isEmpty();
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool BIOSSettings::operator==(const BIOSSettings &d) const
{
    return (this == &d)
        || (   fACPIEnabled            == d.fACPIEnabled
            && fIOAPICEnabled          == d.fIOAPICEnabled
            && fLogoFadeIn             == d.fLogoFadeIn
            && fLogoFadeOut            == d.fLogoFadeOut
            && fPXEDebugEnabled        == d.fPXEDebugEnabled
            && fSmbiosUuidLittleEndian == d.fSmbiosUuidLittleEndian
            && ulLogoDisplayTime       == d.ulLogoDisplayTime
            && biosBootMenuMode        == d.biosBootMenuMode
            && apicMode                == d.apicMode
            && llTimeOffset            == d.llTimeOffset
            && strLogoImagePath        == d.strLogoImagePath);
}

RecordingScreenSettings::RecordingScreenSettings(void)
{
    applyDefaults();
}

RecordingScreenSettings::~RecordingScreenSettings()
{

}

/**
 * Applies the default settings.
 */
void RecordingScreenSettings::applyDefaults(void)
{
    /*
     * Set sensible defaults.
     */

    fEnabled            = false;
    enmDest             = RecordingDestination_File;
    ulMaxTimeS          = 0;
    strOptions          = "";
    File.ulMaxSizeMB    = 0;
    File.strName        = "";
    Video.enmCodec      = RecordingVideoCodec_VP8;
    Video.ulWidth       = 1024;
    Video.ulHeight      = 768;
    Video.ulRate        = 512;
    Video.ulFPS         = 25;
    Audio.enmAudioCodec = RecordingAudioCodec_Opus;
    Audio.cBits         = 16;
    Audio.cChannels     = 2;
    Audio.uHz           = 22050;

    featureMap[RecordingFeature_Video] = true;
    featureMap[RecordingFeature_Audio] = false; /** @todo Audio is not yet enabled by default. */
}

/**
 * Check if all settings have default values.
 */
bool RecordingScreenSettings::areDefaultSettings(void) const
{
    return    fEnabled            == false
           && enmDest             == RecordingDestination_File
           && ulMaxTimeS          == 0
           && strOptions          == ""
           && File.ulMaxSizeMB    == 0
           && File.strName        == ""
           && Video.enmCodec      == RecordingVideoCodec_VP8
           && Video.ulWidth       == 1024
           && Video.ulHeight      == 768
           && Video.ulRate        == 512
           && Video.ulFPS         == 25
           && Audio.enmAudioCodec == RecordingAudioCodec_Opus
           && Audio.cBits         == 16
           && Audio.cChannels     == 2
           && Audio.uHz           == 22050;
}

/**
 * Returns if a certain recording feature is enabled or not.
 *
 * @returns \c true if the feature is enabled, \c false if not.
 * @param   enmFeature          Feature to check.
 */
bool RecordingScreenSettings::isFeatureEnabled(RecordingFeature_T enmFeature) const
{
    RecordingFeatureMap::const_iterator itFeature = featureMap.find(enmFeature);
    if (itFeature != featureMap.end())
        return itFeature->second;

    return false;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool RecordingScreenSettings::operator==(const RecordingScreenSettings &d) const
{
    return    fEnabled            == d.fEnabled
           && enmDest             == d.enmDest
           && featureMap          == d.featureMap
           && ulMaxTimeS          == d.ulMaxTimeS
           && strOptions          == d.strOptions
           && File.ulMaxSizeMB    == d.File.ulMaxSizeMB
           && Video.enmCodec      == d.Video.enmCodec
           && Video.ulWidth       == d.Video.ulWidth
           && Video.ulHeight      == d.Video.ulHeight
           && Video.ulRate        == d.Video.ulRate
           && Video.ulFPS         == d.Video.ulFPS
           && Audio.enmAudioCodec == d.Audio.enmAudioCodec
           && Audio.cBits         == d.Audio.cBits
           && Audio.cChannels     == d.Audio.cChannels
           && Audio.uHz           == d.Audio.uHz;
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
RecordingSettings::RecordingSettings()
{
    applyDefaults();
}

/**
 * Applies the default settings.
 */
void RecordingSettings::applyDefaults(void)
{
    fEnabled = false;

    mapScreens.clear();

    try
    {
        /* Always add screen 0 to the default configuration. */
        RecordingScreenSettings screenSettings; /* Apply default settings for screen 0. */
        screenSettings.fEnabled = true;       /* Enabled by default. */
        mapScreens[0] = screenSettings;
    }
    catch (std::bad_alloc &)
    {
        AssertFailed();
    }
}

/**
 * Check if all settings have default values.
 */
bool RecordingSettings::areDefaultSettings() const
{
    const bool fDefault =    fEnabled          == false
                          && mapScreens.size() == 1;
    if (!fDefault)
        return false;

    RecordingScreenMap::const_iterator itScreen = mapScreens.begin();
    return    itScreen->first == 0
           && itScreen->second.areDefaultSettings();
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool RecordingSettings::operator==(const RecordingSettings &d) const
{
    if (this == &d)
        return true;

    if (   fEnabled          != d.fEnabled
        || mapScreens.size() != d.mapScreens.size())
        return false;

    RecordingScreenMap::const_iterator itScreen = mapScreens.begin();
    uint32_t i = 0;
    while (itScreen != mapScreens.end())
    {
        RecordingScreenMap::const_iterator itScreenThat = d.mapScreens.find(i);
        if (itScreen->second == itScreenThat->second)
        {
            /* Nothing to do in here (yet). */
        }
        else
            return false;

        ++itScreen;
        ++i;
    }

    return true;
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
GraphicsAdapter::GraphicsAdapter() :
    graphicsControllerType(GraphicsControllerType_VBoxVGA),
    ulVRAMSizeMB(8),
    cMonitors(1),
    fAccelerate3D(false),
    fAccelerate2DVideo(false)
{
}

/**
 * Check if all settings have default values.
 */
bool GraphicsAdapter::areDefaultSettings() const
{
    return graphicsControllerType == GraphicsControllerType_VBoxVGA
        && ulVRAMSizeMB == 8
        && cMonitors <= 1
        && !fAccelerate3D
        && !fAccelerate2DVideo;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool GraphicsAdapter::operator==(const GraphicsAdapter &g) const
{
    return (this == &g)
        || (   graphicsControllerType         == g.graphicsControllerType
            && ulVRAMSizeMB                   == g.ulVRAMSizeMB
            && cMonitors                      == g.cMonitors
            && fAccelerate3D                  == g.fAccelerate3D
            && fAccelerate2DVideo             == g.fAccelerate2DVideo);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
TpmSettings::TpmSettings() :
    tpmType(TpmType_None)
{
}

/**
 * Check if all settings have default values.
 */
bool TpmSettings::areDefaultSettings() const
{
    return    tpmType     == TpmType_None
           && strLocation.isEmpty();
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool TpmSettings::operator==(const TpmSettings &g) const
{
    return (this == &g)
        || (   tpmType         == g.tpmType
            && strLocation     == g.strLocation);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NvramSettings::NvramSettings()
{
}

/**
 * Check if all settings have default values.
 */
bool NvramSettings::areDefaultSettings() const
{
    return strNvramPath.isEmpty();
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool NvramSettings::operator==(const NvramSettings &g) const
{
    return (this == &g)
        || (strNvramPath    == g.strNvramPath);
}


/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
USBController::USBController() :
    enmType(USBControllerType_Null)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool USBController::operator==(const USBController &u) const
{
    return (this == &u)
        || (   strName == u.strName
            && enmType == u.enmType);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
USB::USB()
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool USB::operator==(const USB &u) const
{
    return (this == &u)
        || (   llUSBControllers == u.llUSBControllers
            && llDeviceFilters  == u.llDeviceFilters);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NAT::NAT() :
    u32Mtu(0),
    u32SockRcv(0),
    u32SockSnd(0),
    u32TcpRcv(0),
    u32TcpSnd(0),
    fDNSPassDomain(true), /* historically this value is true */
    fDNSProxy(false),
    fDNSUseHostResolver(false),
    fAliasLog(false),
    fAliasProxyOnly(false),
    fAliasUseSamePorts(false),
    fLocalhostReachable(true) /* Historically this value is true. */
{
}

/**
 * Check if all DNS settings have default values.
 */
bool NAT::areDNSDefaultSettings() const
{
    return fDNSPassDomain && !fDNSProxy && !fDNSUseHostResolver;
}

/**
 * Check if all Alias settings have default values.
 */
bool NAT::areAliasDefaultSettings() const
{
    return !fAliasLog && !fAliasProxyOnly && !fAliasUseSamePorts;
}

/**
 * Check if all TFTP settings have default values.
 */
bool NAT::areTFTPDefaultSettings() const
{
    return strTFTPPrefix.isEmpty()
        && strTFTPBootFile.isEmpty()
        && strTFTPNextServer.isEmpty();
}

/**
 * Check whether the localhost-reachable setting is the default for the given settings version.
 */
bool NAT::areLocalhostReachableDefaultSettings(SettingsVersion_T sv) const
{
    return    (   fLocalhostReachable
                && sv < SettingsVersion_v1_19)
           || (   !fLocalhostReachable
                && sv >= SettingsVersion_v1_19);
}

/**
 * Check if all settings have default values.
 */
bool NAT::areDefaultSettings(SettingsVersion_T sv) const
{
    /*
     * Before settings version 1.19 localhost was reachable by default
     * when using NAT which was changed with version 1.19+, see @bugref{9896}
     * for more information.
     */
    return strNetwork.isEmpty()
        && strBindIP.isEmpty()
        && u32Mtu == 0
        && u32SockRcv == 0
        && u32SockSnd == 0
        && u32TcpRcv == 0
        && u32TcpSnd == 0
        && areDNSDefaultSettings()
        && areAliasDefaultSettings()
        && areTFTPDefaultSettings()
        && mapRules.size() == 0
        && areLocalhostReachableDefaultSettings(sv);
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool NAT::operator==(const NAT &n) const
{
   return (this == &n)
       || (   strNetwork           == n.strNetwork
            && strBindIP           == n.strBindIP
            && u32Mtu              == n.u32Mtu
            && u32SockRcv          == n.u32SockRcv
            && u32SockSnd          == n.u32SockSnd
            && u32TcpSnd           == n.u32TcpSnd
            && u32TcpRcv           == n.u32TcpRcv
            && strTFTPPrefix       == n.strTFTPPrefix
            && strTFTPBootFile     == n.strTFTPBootFile
            && strTFTPNextServer   == n.strTFTPNextServer
            && fDNSPassDomain      == n.fDNSPassDomain
            && fDNSProxy           == n.fDNSProxy
            && fDNSUseHostResolver == n.fDNSUseHostResolver
            && fAliasLog           == n.fAliasLog
            && fAliasProxyOnly     == n.fAliasProxyOnly
            && fAliasUseSamePorts  == n.fAliasUseSamePorts
            && fLocalhostReachable == n.fLocalhostReachable
            && mapRules            == n.mapRules);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
NetworkAdapter::NetworkAdapter() :
    ulSlot(0),
    type(NetworkAdapterType_Am79C970A), // default for old VMs, for new ones it's Am79C973
    fEnabled(false),
    fCableConnected(false), // default for old VMs, for new ones it's true
    ulLineSpeed(0),
    enmPromiscModePolicy(NetworkAdapterPromiscModePolicy_Deny),
    fTraceEnabled(false),
    mode(NetworkAttachmentType_Null),
    ulBootPriority(0)
{
}

/**
 * Check if all Generic Driver settings have default values.
 */
bool NetworkAdapter::areGenericDriverDefaultSettings() const
{
    return strGenericDriver.isEmpty()
        && genericProperties.size() == 0;
}

/**
 * Check if all settings have default values.
 */
bool NetworkAdapter::areDefaultSettings(SettingsVersion_T sv) const
{
    // 5.0 and earlier had a default of fCableConnected=false, which doesn't
    // make a lot of sense (but it's a fact). Later versions don't save the
    // setting if it's at the default value and thus must get it right.
    return !fEnabled
        && strMACAddress.isEmpty()
        && (   (sv >= SettingsVersion_v1_16 && fCableConnected && type == NetworkAdapterType_Am79C973)
            || (sv < SettingsVersion_v1_16 && !fCableConnected && type == NetworkAdapterType_Am79C970A))
        && ulLineSpeed == 0
        && enmPromiscModePolicy == NetworkAdapterPromiscModePolicy_Deny
        && mode == NetworkAttachmentType_Null
        && nat.areDefaultSettings(sv)
        && strBridgedName.isEmpty()
        && strInternalNetworkName.isEmpty()
#ifdef VBOX_WITH_VMNET
        && strHostOnlyNetworkName.isEmpty()
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
        && strCloudNetworkName.isEmpty()
#endif /* VBOX_WITH_CLOUD_NET */
        && strHostOnlyName.isEmpty()
        && areGenericDriverDefaultSettings()
        && strNATNetworkName.isEmpty();
}

/**
 * Special check if settings of the non-current attachment type have default values.
 */
bool NetworkAdapter::areDisabledDefaultSettings(SettingsVersion_T sv) const
{
    return (mode != NetworkAttachmentType_NAT ? nat.areDefaultSettings(sv) : true)
        && (mode != NetworkAttachmentType_Bridged ? strBridgedName.isEmpty() : true)
        && (mode != NetworkAttachmentType_Internal ? strInternalNetworkName.isEmpty() : true)
#ifdef VBOX_WITH_VMNET
        && (mode != NetworkAttachmentType_HostOnlyNetwork ? strHostOnlyNetworkName.isEmpty() : true)
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
        && (mode != NetworkAttachmentType_Cloud ? strCloudNetworkName.isEmpty() : true)
#endif /* VBOX_WITH_CLOUD_NET */
        && (mode != NetworkAttachmentType_HostOnly ? strHostOnlyName.isEmpty() : true)
        && (mode != NetworkAttachmentType_Generic ? areGenericDriverDefaultSettings() : true)
        && (mode != NetworkAttachmentType_NATNetwork ? strNATNetworkName.isEmpty() : true);
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool NetworkAdapter::operator==(const NetworkAdapter &n) const
{
    return (this == &n)
        || (   ulSlot                == n.ulSlot
            && type                  == n.type
            && fEnabled              == n.fEnabled
            && strMACAddress         == n.strMACAddress
            && fCableConnected       == n.fCableConnected
            && ulLineSpeed           == n.ulLineSpeed
            && enmPromiscModePolicy  == n.enmPromiscModePolicy
            && fTraceEnabled         == n.fTraceEnabled
            && strTraceFile          == n.strTraceFile
            && mode                  == n.mode
            && nat                   == n.nat
            && strBridgedName        == n.strBridgedName
            && strHostOnlyName       == n.strHostOnlyName
#ifdef VBOX_WITH_VMNET
            && strHostOnlyNetworkName == n.strHostOnlyNetworkName
#endif /* VBOX_WITH_VMNET */
            && strInternalNetworkName == n.strInternalNetworkName
#ifdef VBOX_WITH_CLOUD_NET
            && strCloudNetworkName   == n.strCloudNetworkName
#endif /* VBOX_WITH_CLOUD_NET */
            && strGenericDriver      == n.strGenericDriver
            && genericProperties     == n.genericProperties
            && ulBootPriority        == n.ulBootPriority
            && strBandwidthGroup     == n.strBandwidthGroup);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
SerialPort::SerialPort() :
    ulSlot(0),
    fEnabled(false),
    ulIOBase(0x3f8),
    ulIRQ(4),
    portMode(PortMode_Disconnected),
    fServer(false),
    uartType(UartType_U16550A)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool SerialPort::operator==(const SerialPort &s) const
{
    return (this == &s)
        || (   ulSlot            == s.ulSlot
            && fEnabled          == s.fEnabled
            && ulIOBase          == s.ulIOBase
            && ulIRQ             == s.ulIRQ
            && portMode          == s.portMode
            && strPath           == s.strPath
            && fServer           == s.fServer
            && uartType          == s.uartType);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
ParallelPort::ParallelPort() :
    ulSlot(0),
    fEnabled(false),
    ulIOBase(0x378),
    ulIRQ(7)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool ParallelPort::operator==(const ParallelPort &s) const
{
    return (this == &s)
        || (   ulSlot            == s.ulSlot
            && fEnabled          == s.fEnabled
            && ulIOBase          == s.ulIOBase
            && ulIRQ             == s.ulIRQ
            && strPath           == s.strPath);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
AudioAdapter::AudioAdapter() :
    fEnabled(true), // default for old VMs, for new ones it's false
    fEnabledIn(true), // default for old VMs, for new ones it's false
    fEnabledOut(true), // default for old VMs, for new ones it's false
    controllerType(AudioControllerType_AC97),
    codecType(AudioCodecType_STAC9700),
    driverType(AudioDriverType_Null)
{
}

/**
 * Check if all settings have default values.
 */
bool AudioAdapter::areDefaultSettings(SettingsVersion_T sv) const
{
    return (sv < SettingsVersion_v1_16 ? false : !fEnabled)
        && (sv <= SettingsVersion_v1_16 ? fEnabledIn : !fEnabledIn)
        && (sv <= SettingsVersion_v1_16 ? fEnabledOut : !fEnabledOut)
        && fEnabledOut == true
        && controllerType == AudioControllerType_AC97
        && codecType == AudioCodecType_STAC9700
        && properties.size() == 0;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool AudioAdapter::operator==(const AudioAdapter &a) const
{
    return (this == &a)
        || (   fEnabled        == a.fEnabled
            && fEnabledIn      == a.fEnabledIn
            && fEnabledOut     == a.fEnabledOut
            && controllerType  == a.controllerType
            && codecType       == a.codecType
            && driverType      == a.driverType
            && properties      == a.properties);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
SharedFolder::SharedFolder() :
    fWritable(false),
    fAutoMount(false)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool SharedFolder::operator==(const SharedFolder &g) const
{
    return (this == &g)
        || (   strName           == g.strName
            && strHostPath       == g.strHostPath
            && fWritable         == g.fWritable
            && fAutoMount        == g.fAutoMount
            && strAutoMountPoint == g.strAutoMountPoint);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
GuestProperty::GuestProperty() :
    timestamp(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool GuestProperty::operator==(const GuestProperty &g) const
{
    return (this == &g)
        || (   strName           == g.strName
            && strValue          == g.strValue
            && timestamp         == g.timestamp
            && strFlags          == g.strFlags);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
CpuIdLeaf::CpuIdLeaf() :
    idx(UINT32_MAX),
    idxSub(0),
    uEax(0),
    uEbx(0),
    uEcx(0),
    uEdx(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool CpuIdLeaf::operator==(const CpuIdLeaf &c) const
{
    return (this == &c)
        || (   idx      == c.idx
            && idxSub   == c.idxSub
            && uEax     == c.uEax
            && uEbx     == c.uEbx
            && uEcx     == c.uEcx
            && uEdx     == c.uEdx);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
Cpu::Cpu() :
    ulId(UINT32_MAX)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Cpu::operator==(const Cpu &c) const
{
    return (this == &c)
        || (ulId      == c.ulId);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
BandwidthGroup::BandwidthGroup() :
    cMaxBytesPerSec(0),
    enmType(BandwidthGroupType_Null)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool BandwidthGroup::operator==(const BandwidthGroup &i) const
{
    return (this == &i)
        || (   strName      == i.strName
            && cMaxBytesPerSec == i.cMaxBytesPerSec
            && enmType      == i.enmType);
}

/**
 * IOSettings constructor.
 */
IOSettings::IOSettings() :
    fIOCacheEnabled(true),
    ulIOCacheSize(5)
{
}

/**
 * Check if all IO Cache settings have default values.
 */
bool IOSettings::areIOCacheDefaultSettings() const
{
    return fIOCacheEnabled
        && ulIOCacheSize == 5;
}

/**
 * Check if all settings have default values.
 */
bool IOSettings::areDefaultSettings() const
{
    return areIOCacheDefaultSettings()
        && llBandwidthGroups.size() == 0;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool IOSettings::operator==(const IOSettings &i) const
{
    return (this == &i)
        || (   fIOCacheEnabled   == i.fIOCacheEnabled
            && ulIOCacheSize     == i.ulIOCacheSize
            && llBandwidthGroups == i.llBandwidthGroups);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
HostPCIDeviceAttachment::HostPCIDeviceAttachment() :
    uHostAddress(0),
    uGuestAddress(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool HostPCIDeviceAttachment::operator==(const HostPCIDeviceAttachment &a) const
{
    return (this == &a)
        || (   uHostAddress   == a.uHostAddress
            && uGuestAddress  == a.uGuestAddress
            && strDeviceName  == a.strDeviceName);
}


/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
Hardware::Hardware() :
    strVersion("1"),
    fHardwareVirt(true),
    fNestedPaging(true),
    fVPID(true),
    fUnrestrictedExecution(true),
    fHardwareVirtForce(false),
    fUseNativeApi(false),
    fTripleFaultReset(false),
    fPAE(false),
    fAPIC(true),
    fX2APIC(false),
    fIBPBOnVMExit(false),
    fIBPBOnVMEntry(false),
    fSpecCtrl(false),
    fSpecCtrlByHost(false),
    fL1DFlushOnSched(true),
    fL1DFlushOnVMEntry(false),
    fMDSClearOnSched(true),
    fMDSClearOnVMEntry(false),
    fNestedHWVirt(false),
    fVirtVmsaveVmload(true),
    enmLongMode(HC_ARCH_BITS == 64 ? Hardware::LongMode_Enabled : Hardware::LongMode_Disabled),
    cCPUs(1),
    fCpuHotPlug(false),
    fHPETEnabled(false),
    ulCpuExecutionCap(100),
    uCpuIdPortabilityLevel(0),
    strCpuProfile("host"),
    ulMemorySizeMB((uint32_t)-1),
    firmwareType(FirmwareType_BIOS),
    pointingHIDType(PointingHIDType_PS2Mouse),
    keyboardHIDType(KeyboardHIDType_PS2Keyboard),
    chipsetType(ChipsetType_PIIX3),
    iommuType(IommuType_None),
    paravirtProvider(ParavirtProvider_Legacy), // default for old VMs, for new ones it's ParavirtProvider_Default
    strParavirtDebug(""),
    fEmulatedUSBCardReader(false),
    clipboardMode(ClipboardMode_Disabled),
    fClipboardFileTransfersEnabled(false),
    dndMode(DnDMode_Disabled),
    ulMemoryBalloonSize(0),
    fPageFusionEnabled(false)
{
    mapBootOrder[0] = DeviceType_Floppy;
    mapBootOrder[1] = DeviceType_DVD;
    mapBootOrder[2] = DeviceType_HardDisk;

    /* The default value for PAE depends on the host:
     * - 64 bits host -> always true
     * - 32 bits host -> true for Windows & Darwin (masked off if the host cpu doesn't support it anyway)
     */
#if HC_ARCH_BITS == 64 || defined(RT_OS_WINDOWS) || defined(RT_OS_DARWIN)
    fPAE = true;
#endif

    /* The default value of large page supports depends on the host:
     * - 64 bits host -> true, unless it's Linux (pending further prediction work due to excessively expensive large page allocations)
     * - 32 bits host -> false
     */
#if HC_ARCH_BITS == 64 && !defined(RT_OS_LINUX)
    fLargePages = true;
#else
    /* Not supported on 32 bits hosts. */
    fLargePages = false;
#endif
}

/**
 * Check if all Paravirt settings have default values.
 */
bool Hardware::areParavirtDefaultSettings(SettingsVersion_T sv) const
{
    // 5.0 didn't save the paravirt settings if it is ParavirtProvider_Legacy,
    // so this default must be kept. Later versions don't save the setting if
    // it's at the default value.
    return (   (sv >= SettingsVersion_v1_16 && paravirtProvider == ParavirtProvider_Default)
            || (sv < SettingsVersion_v1_16 && paravirtProvider == ParavirtProvider_Legacy))
        && strParavirtDebug.isEmpty();
}

/**
 * Check if all Boot Order settings have default values.
 */
bool Hardware::areBootOrderDefaultSettings() const
{
    BootOrderMap::const_iterator it0 = mapBootOrder.find(0);
    BootOrderMap::const_iterator it1 = mapBootOrder.find(1);
    BootOrderMap::const_iterator it2 = mapBootOrder.find(2);
    BootOrderMap::const_iterator it3 = mapBootOrder.find(3);
    return    (   mapBootOrder.size() == 3
               || (   mapBootOrder.size() == 4
                   && (it3 != mapBootOrder.end() && it3->second == DeviceType_Null)))
           && (it0 != mapBootOrder.end() && it0->second == DeviceType_Floppy)
           && (it1 != mapBootOrder.end() && it1->second == DeviceType_DVD)
           && (it2 != mapBootOrder.end() && it2->second == DeviceType_HardDisk);
}

/**
 * Check if all Network Adapter settings have default values.
 */
bool Hardware::areAllNetworkAdaptersDefaultSettings(SettingsVersion_T sv) const
{
    for (NetworkAdaptersList::const_iterator it = llNetworkAdapters.begin();
         it != llNetworkAdapters.end();
         ++it)
    {
        if (!it->areDefaultSettings(sv))
            return false;
    }
    return true;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Hardware::operator==(const Hardware& h) const
{
    return (this == &h)
        || (   strVersion                     == h.strVersion
            && uuid                           == h.uuid
            && fHardwareVirt                  == h.fHardwareVirt
            && fNestedPaging                  == h.fNestedPaging
            && fLargePages                    == h.fLargePages
            && fVPID                          == h.fVPID
            && fUnrestrictedExecution         == h.fUnrestrictedExecution
            && fHardwareVirtForce             == h.fHardwareVirtForce
            && fUseNativeApi                  == h.fUseNativeApi
            && fPAE                           == h.fPAE
            && enmLongMode                    == h.enmLongMode
            && fTripleFaultReset              == h.fTripleFaultReset
            && fAPIC                          == h.fAPIC
            && fX2APIC                        == h.fX2APIC
            && fIBPBOnVMExit                  == h.fIBPBOnVMExit
            && fIBPBOnVMEntry                 == h.fIBPBOnVMEntry
            && fSpecCtrl                      == h.fSpecCtrl
            && fSpecCtrlByHost                == h.fSpecCtrlByHost
            && fL1DFlushOnSched               == h.fL1DFlushOnSched
            && fL1DFlushOnVMEntry             == h.fL1DFlushOnVMEntry
            && fMDSClearOnSched               == h.fMDSClearOnSched
            && fMDSClearOnVMEntry             == h.fMDSClearOnVMEntry
            && fNestedHWVirt                  == h.fNestedHWVirt
            && fVirtVmsaveVmload              == h.fVirtVmsaveVmload
            && cCPUs                          == h.cCPUs
            && fCpuHotPlug                    == h.fCpuHotPlug
            && ulCpuExecutionCap              == h.ulCpuExecutionCap
            && uCpuIdPortabilityLevel         == h.uCpuIdPortabilityLevel
            && strCpuProfile                  == h.strCpuProfile
            && fHPETEnabled                   == h.fHPETEnabled
            && llCpus                         == h.llCpus
            && llCpuIdLeafs                   == h.llCpuIdLeafs
            && ulMemorySizeMB                 == h.ulMemorySizeMB
            && mapBootOrder                   == h.mapBootOrder
            && firmwareType                   == h.firmwareType
            && pointingHIDType                == h.pointingHIDType
            && keyboardHIDType                == h.keyboardHIDType
            && chipsetType                    == h.chipsetType
            && iommuType                      == h.iommuType
            && paravirtProvider               == h.paravirtProvider
            && strParavirtDebug               == h.strParavirtDebug
            && fEmulatedUSBCardReader         == h.fEmulatedUSBCardReader
            && vrdeSettings                   == h.vrdeSettings
            && biosSettings                   == h.biosSettings
            && nvramSettings                  == h.nvramSettings
            && graphicsAdapter                == h.graphicsAdapter
            && usbSettings                    == h.usbSettings
            && tpmSettings                    == h.tpmSettings
            && llNetworkAdapters              == h.llNetworkAdapters
            && llSerialPorts                  == h.llSerialPorts
            && llParallelPorts                == h.llParallelPorts
            && audioAdapter                   == h.audioAdapter
            && storage                        == h.storage
            && llSharedFolders                == h.llSharedFolders
            && clipboardMode                  == h.clipboardMode
            && fClipboardFileTransfersEnabled == h.fClipboardFileTransfersEnabled
            && dndMode                        == h.dndMode
            && ulMemoryBalloonSize            == h.ulMemoryBalloonSize
            && fPageFusionEnabled             == h.fPageFusionEnabled
            && llGuestProperties              == h.llGuestProperties
            && ioSettings                     == h.ioSettings
            && pciAttachments                 == h.pciAttachments
            && strDefaultFrontend             == h.strDefaultFrontend);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
AttachedDevice::AttachedDevice() :
    deviceType(DeviceType_Null),
    fPassThrough(false),
    fTempEject(false),
    fNonRotational(false),
    fDiscard(false),
    fHotPluggable(false),
    lPort(0),
    lDevice(0)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool AttachedDevice::operator==(const AttachedDevice &a) const
{
    return (this == &a)
        || (   deviceType                == a.deviceType
            && fPassThrough              == a.fPassThrough
            && fTempEject                == a.fTempEject
            && fNonRotational            == a.fNonRotational
            && fDiscard                  == a.fDiscard
            && fHotPluggable             == a.fHotPluggable
            && lPort                     == a.lPort
            && lDevice                   == a.lDevice
            && uuid                      == a.uuid
            && strHostDriveSrc           == a.strHostDriveSrc
            && strBwGroup                == a.strBwGroup);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
StorageController::StorageController() :
    storageBus(StorageBus_IDE),
    controllerType(StorageControllerType_PIIX3),
    ulPortCount(2),
    ulInstance(0),
    fUseHostIOCache(true),
    fBootable(true)
{
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool StorageController::operator==(const StorageController &s) const
{
    return (this == &s)
        || (   strName                   == s.strName
            && storageBus                == s.storageBus
            && controllerType            == s.controllerType
            && ulPortCount               == s.ulPortCount
            && ulInstance                == s.ulInstance
            && fUseHostIOCache           == s.fUseHostIOCache
            && llAttachedDevices         == s.llAttachedDevices);
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Storage::operator==(const Storage &s) const
{
    return (this == &s)
        || (llStorageControllers == s.llStorageControllers);            // deep compare
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
Debugging::Debugging() :
    fTracingEnabled(false),
    fAllowTracingToAccessVM(false),
    strTracingConfig()
{
}

/**
 * Check if all settings have default values.
 */
bool Debugging::areDefaultSettings() const
{
    return !fTracingEnabled
        && !fAllowTracingToAccessVM
        && strTracingConfig.isEmpty();
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Debugging::operator==(const Debugging &d) const
{
    return (this == &d)
        || (   fTracingEnabled          == d.fTracingEnabled
            && fAllowTracingToAccessVM  == d.fAllowTracingToAccessVM
            && strTracingConfig         == d.strTracingConfig);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
Autostart::Autostart() :
    fAutostartEnabled(false),
    uAutostartDelay(0),
    enmAutostopType(AutostopType_Disabled)
{
}

/**
 * Check if all settings have default values.
 */
bool Autostart::areDefaultSettings() const
{
    return !fAutostartEnabled
        && !uAutostartDelay
        && enmAutostopType == AutostopType_Disabled;
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Autostart::operator==(const Autostart &a) const
{
    return (this == &a)
        || (   fAutostartEnabled == a.fAutostartEnabled
            && uAutostartDelay   == a.uAutostartDelay
            && enmAutostopType   == a.enmAutostopType);
}

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
Snapshot::Snapshot()
{
    RTTimeSpecSetNano(&timestamp, 0);
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool Snapshot::operator==(const Snapshot &s) const
{
    return (this == &s)
        || (   uuid                  == s.uuid
            && strName               == s.strName
            && strDescription        == s.strDescription
            && RTTimeSpecIsEqual(&timestamp, &s.timestamp)
            && strStateFile          == s.strStateFile
            && hardware              == s.hardware                  // deep compare
            && llChildSnapshots      == s.llChildSnapshots          // deep compare
            && debugging             == s.debugging
            && autostart             == s.autostart);
}

const struct Snapshot settings::Snapshot::Empty; /* default ctor is OK */

/**
 * Constructor. Needs to set sane defaults which stand the test of time.
 */
MachineUserData::MachineUserData() :
    fDirectoryIncludesUUID(false),
    fNameSync(true),
    fTeleporterEnabled(false),
    uTeleporterPort(0),
    fRTCUseUTC(false),
    enmVMPriority(VMProcPriority_Default)
{
    llGroups.push_back("/");
}

/**
 * Comparison operator. This gets called from MachineConfigFile::operator==,
 * which in turn gets called from Machine::saveSettings to figure out whether
 * machine settings have really changed and thus need to be written out to disk.
 */
bool MachineUserData::operator==(const MachineUserData &c) const
{
    return (this == &c)
        || (   strName                    == c.strName
            && fDirectoryIncludesUUID     == c.fDirectoryIncludesUUID
            && fNameSync                  == c.fNameSync
            && strDescription             == c.strDescription
            && llGroups                   == c.llGroups
            && strOsType                  == c.strOsType
            && strSnapshotFolder          == c.strSnapshotFolder
            && fTeleporterEnabled         == c.fTeleporterEnabled
            && uTeleporterPort            == c.uTeleporterPort
            && strTeleporterAddress       == c.strTeleporterAddress
            && strTeleporterPassword      == c.strTeleporterPassword
            && fRTCUseUTC                 == c.fRTCUseUTC
            && ovIcon                     == c.ovIcon
            && enmVMPriority              == c.enmVMPriority);
}


////////////////////////////////////////////////////////////////////////////////
//
// MachineConfigFile
//
////////////////////////////////////////////////////////////////////////////////

/**
 * Constructor.
 *
 * If pstrFilename is != NULL, this reads the given settings file into the member
 * variables and various substructures and lists. Otherwise, the member variables
 * are initialized with default values.
 *
 * Throws variants of xml::Error for I/O, XML and logical content errors, which
 * the caller should catch; if this constructor does not throw, then the member
 * variables contain meaningful values (either from the file or defaults).
 *
 * @param pstrFilename
 */
MachineConfigFile::MachineConfigFile(const Utf8Str *pstrFilename)
    : ConfigFileBase(pstrFilename),
      fCurrentStateModified(true),
      fAborted(false)
{
    RTTimeNow(&timeLastStateChange);

    if (pstrFilename)
    {
        // the ConfigFileBase constructor has loaded the XML file, so now
        // we need only analyze what is in there

        xml::NodesLoop nlRootChildren(*m->pelmRoot);
        const xml::ElementNode *pelmRootChild;
        while ((pelmRootChild = nlRootChildren.forAllNodes()))
        {
            if (pelmRootChild->nameEquals("Machine"))
                readMachine(*pelmRootChild);
        }

        // clean up memory allocated by XML engine
        clearDocument();
    }
}

/**
 * Public routine which returns true if this machine config file can have its
 * own media registry (which is true for settings version v1.11 and higher,
 * i.e. files created by VirtualBox 4.0 and higher).
 * @return
 */
bool MachineConfigFile::canHaveOwnMediaRegistry() const
{
    return (m->sv >= SettingsVersion_v1_11);
}

/**
 * Public routine which allows for importing machine XML from an external DOM tree.
 * Use this after having called the constructor with a NULL argument.
 *
 * This is used by the OVF code if a <vbox:Machine> element has been encountered
 * in an OVF VirtualSystem element.
 *
 * @param elmMachine
 */
void MachineConfigFile::importMachineXML(const xml::ElementNode &elmMachine)
{
    // Ideally the version should be mandatory, but since VirtualBox didn't
    // care about it until 5.1 came with different defaults, there are OVF
    // files created by magicians (not using VirtualBox, which always wrote it)
    // which lack this information. Let's hope that they learn to add the
    // version when they switch to the newer settings style/defaults of 5.1.
    if (!(elmMachine.getAttributeValue("version", m->strSettingsVersionFull)))
        m->strSettingsVersionFull = VBOX_XML_IMPORT_VERSION_FULL;

    LogRel(("Import settings with version \"%s\"\n", m->strSettingsVersionFull.c_str()));

    m->sv = parseVersion(m->strSettingsVersionFull, &elmMachine);

    // remember the settings version we read in case it gets upgraded later,
    // so we know when to make backups
    m->svRead = m->sv;

    readMachine(elmMachine);
}

/**
 * Comparison operator. This gets called from Machine::saveSettings to figure out
 * whether machine settings have really changed and thus need to be written out to disk.
 *
 * Even though this is called operator==, this does NOT compare all fields; the "equals"
 * should be understood as "has the same machine config as". The following fields are
 * NOT compared:
 *      -- settings versions and file names inherited from ConfigFileBase;
 *      -- fCurrentStateModified because that is considered separately in Machine::saveSettings!!
 *
 * The "deep" comparisons marked below will invoke the operator== functions of the
 * structs defined in this file, which may in turn go into comparing lists of
 * other structures. As a result, invoking this can be expensive, but it's
 * less expensive than writing out XML to disk.
 */
bool MachineConfigFile::operator==(const MachineConfigFile &c) const
{
    return (this == &c)
        || (   uuid                       == c.uuid
            && machineUserData            == c.machineUserData
            && strStateFile               == c.strStateFile
            && uuidCurrentSnapshot        == c.uuidCurrentSnapshot
            // skip fCurrentStateModified!
            && RTTimeSpecIsEqual(&timeLastStateChange, &c.timeLastStateChange)
            && fAborted                   == c.fAborted
            && hardwareMachine            == c.hardwareMachine      // this one's deep
            && mediaRegistry              == c.mediaRegistry        // this one's deep
            // skip mapExtraDataItems! there is no old state available as it's always forced
            && llFirstSnapshot            == c.llFirstSnapshot);    // this one's deep
}

/**
 * Called from MachineConfigFile::readHardware() to read cpu information.
 * @param elmCpu
 * @param ll
 */
void MachineConfigFile::readCpuTree(const xml::ElementNode &elmCpu,
                                    CpuList &ll)
{
    xml::NodesLoop nl1(elmCpu, "Cpu");
    const xml::ElementNode *pelmCpu;
    while ((pelmCpu = nl1.forAllNodes()))
    {
        Cpu cpu;

        if (!pelmCpu->getAttributeValue("id", cpu.ulId))
            throw ConfigFileError(this, pelmCpu, N_("Required Cpu/@id attribute is missing"));

        ll.push_back(cpu);
    }
}

/**
 * Called from MachineConfigFile::readHardware() to cpuid information.
 * @param elmCpuid
 * @param ll
 */
void MachineConfigFile::readCpuIdTree(const xml::ElementNode &elmCpuid,
                                      CpuIdLeafsList &ll)
{
    xml::NodesLoop nl1(elmCpuid, "CpuIdLeaf");
    const xml::ElementNode *pelmCpuIdLeaf;
    while ((pelmCpuIdLeaf = nl1.forAllNodes()))
    {
        CpuIdLeaf leaf;

        if (!pelmCpuIdLeaf->getAttributeValue("id", leaf.idx))
            throw ConfigFileError(this, pelmCpuIdLeaf, N_("Required CpuId/@id attribute is missing"));

        if (!pelmCpuIdLeaf->getAttributeValue("subleaf", leaf.idxSub))
            leaf.idxSub = 0;
        pelmCpuIdLeaf->getAttributeValue("eax", leaf.uEax);
        pelmCpuIdLeaf->getAttributeValue("ebx", leaf.uEbx);
        pelmCpuIdLeaf->getAttributeValue("ecx", leaf.uEcx);
        pelmCpuIdLeaf->getAttributeValue("edx", leaf.uEdx);

        ll.push_back(leaf);
    }
}

/**
 * Called from MachineConfigFile::readHardware() to network information.
 * @param elmNetwork
 * @param ll
 */
void MachineConfigFile::readNetworkAdapters(const xml::ElementNode &elmNetwork,
                                            NetworkAdaptersList &ll)
{
    xml::NodesLoop nl1(elmNetwork, "Adapter");
    const xml::ElementNode *pelmAdapter;
    while ((pelmAdapter = nl1.forAllNodes()))
    {
        NetworkAdapter nic;

        if (m->sv >= SettingsVersion_v1_16)
        {
            /* Starting with VirtualBox 5.1 the default is cable connected and
             * PCnet-FAST III. Needs to match NetworkAdapter.areDefaultSettings(). */
            nic.fCableConnected = true;
            nic.type = NetworkAdapterType_Am79C973;
        }

        if (!pelmAdapter->getAttributeValue("slot", nic.ulSlot))
            throw ConfigFileError(this, pelmAdapter, N_("Required Adapter/@slot attribute is missing"));

        Utf8Str strTemp;
        if (pelmAdapter->getAttributeValue("type", strTemp))
        {
            if (strTemp == "Am79C970A")
                nic.type = NetworkAdapterType_Am79C970A;
            else if (strTemp == "Am79C973")
                nic.type = NetworkAdapterType_Am79C973;
            else if (strTemp == "Am79C960")
                nic.type = NetworkAdapterType_Am79C960;
            else if (strTemp == "82540EM")
                nic.type = NetworkAdapterType_I82540EM;
            else if (strTemp == "82543GC")
                nic.type = NetworkAdapterType_I82543GC;
            else if (strTemp == "82545EM")
                nic.type = NetworkAdapterType_I82545EM;
            else if (strTemp == "virtio")
                nic.type = NetworkAdapterType_Virtio;
            else if (strTemp == "NE1000")
                nic.type = NetworkAdapterType_NE1000;
            else if (strTemp == "NE2000")
                nic.type = NetworkAdapterType_NE2000;
            else if (strTemp == "WD8003")
                nic.type = NetworkAdapterType_WD8003;
            else if (strTemp == "WD8013")
                nic.type = NetworkAdapterType_WD8013;
            else if (strTemp == "3C503")
                nic.type = NetworkAdapterType_ELNK2;
            else if (strTemp == "3C501")
                nic.type = NetworkAdapterType_ELNK1;
            else
                throw ConfigFileError(this, pelmAdapter, N_("Invalid value '%s' in Adapter/@type attribute"), strTemp.c_str());
        }

        pelmAdapter->getAttributeValue("enabled", nic.fEnabled);
        pelmAdapter->getAttributeValue("MACAddress", nic.strMACAddress);
        pelmAdapter->getAttributeValue("cable", nic.fCableConnected);
        pelmAdapter->getAttributeValue("speed", nic.ulLineSpeed);

        if (pelmAdapter->getAttributeValue("promiscuousModePolicy", strTemp))
        {
            if (strTemp == "Deny")
                nic.enmPromiscModePolicy = NetworkAdapterPromiscModePolicy_Deny;
            else if (strTemp == "AllowNetwork")
                nic.enmPromiscModePolicy = NetworkAdapterPromiscModePolicy_AllowNetwork;
            else if (strTemp == "AllowAll")
                nic.enmPromiscModePolicy = NetworkAdapterPromiscModePolicy_AllowAll;
            else
                throw ConfigFileError(this, pelmAdapter,
                                      N_("Invalid value '%s' in Adapter/@promiscuousModePolicy attribute"), strTemp.c_str());
        }

        pelmAdapter->getAttributeValue("trace", nic.fTraceEnabled);
        pelmAdapter->getAttributeValue("tracefile", nic.strTraceFile);
        pelmAdapter->getAttributeValue("bootPriority", nic.ulBootPriority);
        pelmAdapter->getAttributeValue("bandwidthGroup", nic.strBandwidthGroup);

        xml::ElementNodesList llNetworkModes;
        pelmAdapter->getChildElements(llNetworkModes);
        xml::ElementNodesList::iterator it;
        /* We should have only active mode descriptor and disabled modes set */
        if (llNetworkModes.size() > 2)
        {
            throw ConfigFileError(this, pelmAdapter, N_("Invalid number of modes ('%d') attached to Adapter attribute"), llNetworkModes.size());
        }
        for (it = llNetworkModes.begin(); it != llNetworkModes.end(); ++it)
        {
            const xml::ElementNode *pelmNode = *it;
            if (pelmNode->nameEquals("DisabledModes"))
            {
                xml::ElementNodesList llDisabledNetworkModes;
                xml::ElementNodesList::iterator itDisabled;
                pelmNode->getChildElements(llDisabledNetworkModes);
                /* run over disabled list and load settings */
                for (itDisabled = llDisabledNetworkModes.begin();
                     itDisabled != llDisabledNetworkModes.end(); ++itDisabled)
                {
                    const xml::ElementNode *pelmDisabledNode = *itDisabled;
                    readAttachedNetworkMode(*pelmDisabledNode, false, nic);
                }
            }
            else
                readAttachedNetworkMode(*pelmNode, true, nic);
        }
        // else: default is NetworkAttachmentType_Null

        ll.push_back(nic);
    }
}

void MachineConfigFile::readAttachedNetworkMode(const xml::ElementNode &elmMode, bool fEnabled, NetworkAdapter &nic)
{
    NetworkAttachmentType_T enmAttachmentType = NetworkAttachmentType_Null;

    if (elmMode.nameEquals("NAT"))
    {
        enmAttachmentType = NetworkAttachmentType_NAT;

        elmMode.getAttributeValue("network", nic.nat.strNetwork);
        elmMode.getAttributeValue("hostip", nic.nat.strBindIP);
        elmMode.getAttributeValue("mtu", nic.nat.u32Mtu);
        elmMode.getAttributeValue("sockrcv", nic.nat.u32SockRcv);
        elmMode.getAttributeValue("socksnd", nic.nat.u32SockSnd);
        elmMode.getAttributeValue("tcprcv", nic.nat.u32TcpRcv);
        elmMode.getAttributeValue("tcpsnd", nic.nat.u32TcpSnd);
        elmMode.getAttributeValue("localhost-reachable", nic.nat.fLocalhostReachable);
        const xml::ElementNode *pelmDNS;
        if ((pelmDNS = elmMode.findChildElement("DNS")))
        {
            pelmDNS->getAttributeValue("pass-domain", nic.nat.fDNSPassDomain);
            pelmDNS->getAttributeValue("use-proxy", nic.nat.fDNSProxy);
            pelmDNS->getAttributeValue("use-host-resolver", nic.nat.fDNSUseHostResolver);
        }
        const xml::ElementNode *pelmAlias;
        if ((pelmAlias = elmMode.findChildElement("Alias")))
        {
            pelmAlias->getAttributeValue("logging", nic.nat.fAliasLog);
            pelmAlias->getAttributeValue("proxy-only", nic.nat.fAliasProxyOnly);
            pelmAlias->getAttributeValue("use-same-ports", nic.nat.fAliasUseSamePorts);
        }
        const xml::ElementNode *pelmTFTP;
        if ((pelmTFTP = elmMode.findChildElement("TFTP")))
        {
            pelmTFTP->getAttributeValue("prefix", nic.nat.strTFTPPrefix);
            pelmTFTP->getAttributeValue("boot-file", nic.nat.strTFTPBootFile);
            pelmTFTP->getAttributeValue("next-server", nic.nat.strTFTPNextServer);
        }

        readNATForwardRulesMap(elmMode, nic.nat.mapRules);
    }
    else if (   elmMode.nameEquals("HostInterface")
             || elmMode.nameEquals("BridgedInterface"))
    {
        enmAttachmentType = NetworkAttachmentType_Bridged;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strBridgedName);
    }
    else if (elmMode.nameEquals("InternalNetwork"))
    {
        enmAttachmentType = NetworkAttachmentType_Internal;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strInternalNetworkName);
    }
    else if (elmMode.nameEquals("HostOnlyInterface"))
    {
        enmAttachmentType = NetworkAttachmentType_HostOnly;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strHostOnlyName);
    }
#ifdef VBOX_WITH_VMNET
    else if (elmMode.nameEquals("HostOnlyNetwork"))
    {
        enmAttachmentType = NetworkAttachmentType_HostOnlyNetwork;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strHostOnlyNetworkName);
    }
#endif /* VBOX_WITH_VMNET */
    else if (elmMode.nameEquals("GenericInterface"))
    {
        enmAttachmentType = NetworkAttachmentType_Generic;

        elmMode.getAttributeValue("driver", nic.strGenericDriver);  // optional network attachment driver

        // get all properties
        xml::NodesLoop nl(elmMode);
        const xml::ElementNode *pelmModeChild;
        while ((pelmModeChild = nl.forAllNodes()))
        {
            if (pelmModeChild->nameEquals("Property"))
            {
                Utf8Str strPropName, strPropValue;
                if (   pelmModeChild->getAttributeValue("name", strPropName)
                    && pelmModeChild->getAttributeValue("value", strPropValue) )
                    nic.genericProperties[strPropName] = strPropValue;
                else
                    throw ConfigFileError(this, pelmModeChild, N_("Required GenericInterface/Property/@name or @value attribute is missing"));
            }
        }
    }
    else if (elmMode.nameEquals("NATNetwork"))
    {
        enmAttachmentType = NetworkAttachmentType_NATNetwork;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strNATNetworkName);
    }
    else if (elmMode.nameEquals("VDE"))
    {
        // inofficial hack (VDE networking was never part of the official
        // settings, so it's not mentioned in VirtualBox-settings.xsd)
        enmAttachmentType = NetworkAttachmentType_Generic;

        com::Utf8Str strVDEName;
        elmMode.getAttributeValue("network", strVDEName);   // optional network name
        nic.strGenericDriver = "VDE";
        nic.genericProperties["network"] = strVDEName;
    }
#ifdef VBOX_WITH_VMNET
    else if (elmMode.nameEquals("HostOnlyNetwork"))
    {
        enmAttachmentType = NetworkAttachmentType_HostOnly;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strHostOnlyNetworkName);
    }
#endif /* VBOX_WITH_VMNET */
#ifdef VBOX_WITH_CLOUD_NET
    else if (elmMode.nameEquals("CloudNetwork"))
    {
        enmAttachmentType = NetworkAttachmentType_Cloud;

        // optional network name, cannot be required or we have trouble with
        // settings which are saved before configuring the network name
        elmMode.getAttributeValue("name", nic.strCloudNetworkName);
    }
#endif /* VBOX_WITH_CLOUD_NET */

    if (fEnabled && enmAttachmentType != NetworkAttachmentType_Null)
        nic.mode = enmAttachmentType;
}

/**
 * Called from MachineConfigFile::readHardware() to read serial port information.
 * @param elmUART
 * @param ll
 */
void MachineConfigFile::readSerialPorts(const xml::ElementNode &elmUART,
                                        SerialPortsList &ll)
{
    xml::NodesLoop nl1(elmUART, "Port");
    const xml::ElementNode *pelmPort;
    while ((pelmPort = nl1.forAllNodes()))
    {
        SerialPort port;
        if (!pelmPort->getAttributeValue("slot", port.ulSlot))
            throw ConfigFileError(this, pelmPort, N_("Required UART/Port/@slot attribute is missing"));

        // slot must be unique
        for (SerialPortsList::const_iterator it = ll.begin();
             it != ll.end();
             ++it)
            if ((*it).ulSlot == port.ulSlot)
                throw ConfigFileError(this, pelmPort, N_("Invalid value %RU32 in UART/Port/@slot attribute: value is not unique"), port.ulSlot);

        if (!pelmPort->getAttributeValue("enabled", port.fEnabled))
            throw ConfigFileError(this, pelmPort, N_("Required UART/Port/@enabled attribute is missing"));
        if (!pelmPort->getAttributeValue("IOBase", port.ulIOBase))
            throw ConfigFileError(this, pelmPort, N_("Required UART/Port/@IOBase attribute is missing"));
        if (!pelmPort->getAttributeValue("IRQ", port.ulIRQ))
            throw ConfigFileError(this, pelmPort, N_("Required UART/Port/@IRQ attribute is missing"));

        Utf8Str strPortMode;
        if (!pelmPort->getAttributeValue("hostMode", strPortMode))
            throw ConfigFileError(this, pelmPort, N_("Required UART/Port/@hostMode attribute is missing"));
        if (strPortMode == "RawFile")
            port.portMode = PortMode_RawFile;
        else if (strPortMode == "HostPipe")
            port.portMode = PortMode_HostPipe;
        else if (strPortMode == "HostDevice")
            port.portMode = PortMode_HostDevice;
        else if (strPortMode == "Disconnected")
            port.portMode = PortMode_Disconnected;
        else if (strPortMode == "TCP")
            port.portMode = PortMode_TCP;
        else
            throw ConfigFileError(this, pelmPort, N_("Invalid value '%s' in UART/Port/@hostMode attribute"), strPortMode.c_str());

        pelmPort->getAttributeValue("path", port.strPath);
        pelmPort->getAttributeValue("server", port.fServer);

        Utf8Str strUartType;
        if (pelmPort->getAttributeValue("uartType", strUartType))
        {
            if (strUartType == "16450")
                port.uartType = UartType_U16450;
            else if (strUartType == "16550A")
                port.uartType = UartType_U16550A;
            else if (strUartType == "16750")
                port.uartType = UartType_U16750;
            else
                throw ConfigFileError(this, pelmPort, N_("Invalid value '%s' in UART/Port/@uartType attribute"), strUartType.c_str());
        }

        ll.push_back(port);
    }
}

/**
 * Called from MachineConfigFile::readHardware() to read parallel port information.
 * @param elmLPT
 * @param ll
 */
void MachineConfigFile::readParallelPorts(const xml::ElementNode &elmLPT,
                                          ParallelPortsList &ll)
{
    xml::NodesLoop nl1(elmLPT, "Port");
    const xml::ElementNode *pelmPort;
    while ((pelmPort = nl1.forAllNodes()))
    {
        ParallelPort port;
        if (!pelmPort->getAttributeValue("slot", port.ulSlot))
            throw ConfigFileError(this, pelmPort, N_("Required LPT/Port/@slot attribute is missing"));

        // slot must be unique
        for (ParallelPortsList::const_iterator it = ll.begin();
             it != ll.end();
             ++it)
            if ((*it).ulSlot == port.ulSlot)
                throw ConfigFileError(this, pelmPort, N_("Invalid value %RU32 in LPT/Port/@slot attribute: value is not unique"), port.ulSlot);

        if (!pelmPort->getAttributeValue("enabled", port.fEnabled))
            throw ConfigFileError(this, pelmPort, N_("Required LPT/Port/@enabled attribute is missing"));
        if (!pelmPort->getAttributeValue("IOBase", port.ulIOBase))
            throw ConfigFileError(this, pelmPort, N_("Required LPT/Port/@IOBase attribute is missing"));
        if (!pelmPort->getAttributeValue("IRQ", port.ulIRQ))
            throw ConfigFileError(this, pelmPort, N_("Required LPT/Port/@IRQ attribute is missing"));

        pelmPort->getAttributeValue("path", port.strPath);

        ll.push_back(port);
    }
}

/**
 * Called from MachineConfigFile::readHardware() to read audio adapter information
 * and maybe fix driver information depending on the current host hardware.
 *
 * @param elmAudioAdapter "AudioAdapter" XML element.
 * @param aa
 */
void MachineConfigFile::readAudioAdapter(const xml::ElementNode &elmAudioAdapter,
                                         AudioAdapter &aa)
{
    if (m->sv >= SettingsVersion_v1_15)
    {
        // get all properties
        xml::NodesLoop nl1(elmAudioAdapter, "Property");
        const xml::ElementNode *pelmModeChild;
        while ((pelmModeChild = nl1.forAllNodes()))
        {
            Utf8Str strPropName, strPropValue;
            if (   pelmModeChild->getAttributeValue("name", strPropName)
                && pelmModeChild->getAttributeValue("value", strPropValue) )
                aa.properties[strPropName] = strPropValue;
            else
                throw ConfigFileError(this, pelmModeChild, N_("Required AudioAdapter/Property/@name or @value attribute "
                                                              "is missing"));
        }
    }

    elmAudioAdapter.getAttributeValue("enabled", aa.fEnabled);
    elmAudioAdapter.getAttributeValue("enabledIn", aa.fEnabledIn);
    elmAudioAdapter.getAttributeValue("enabledOut", aa.fEnabledOut);

    Utf8Str strTemp;
    if (elmAudioAdapter.getAttributeValue("controller", strTemp))
    {
        if (strTemp == "SB16")
            aa.controllerType = AudioControllerType_SB16;
        else if (strTemp == "AC97")
            aa.controllerType = AudioControllerType_AC97;
        else if (strTemp == "HDA")
            aa.controllerType = AudioControllerType_HDA;
        else
            throw ConfigFileError(this, &elmAudioAdapter, N_("Invalid value '%s' in AudioAdapter/@controller attribute"), strTemp.c_str());
    }

    if (elmAudioAdapter.getAttributeValue("codec", strTemp))
    {
        if (strTemp == "SB16")
            aa.codecType = AudioCodecType_SB16;
        else if (strTemp == "STAC9700")
            aa.codecType = AudioCodecType_STAC9700;
        else if (strTemp == "AD1980")
            aa.codecType = AudioCodecType_AD1980;
        else if (strTemp == "STAC9221")
            aa.codecType = AudioCodecType_STAC9221;
        else
            throw ConfigFileError(this, &elmAudioAdapter, N_("Invalid value '%s' in AudioAdapter/@codec attribute"), strTemp.c_str());
    }
    else
    {
        /* No codec attribute provided; use defaults. */
        switch (aa.controllerType)
        {
            case AudioControllerType_AC97:
                aa.codecType = AudioCodecType_STAC9700;
                break;
            case AudioControllerType_SB16:
                aa.codecType = AudioCodecType_SB16;
                break;
            case AudioControllerType_HDA:
                aa.codecType = AudioCodecType_STAC9221;
                break;
            default:
                Assert(false);  /* We just checked the controller type above. */
        }
    }

    if (elmAudioAdapter.getAttributeValue("driver", strTemp))
    {
        // settings before 1.3 used lower case so make sure this is case-insensitive
        strTemp.toUpper();
        if (strTemp == "NULL")
            aa.driverType = AudioDriverType_Null;
        else if (strTemp == "WINMM")
            aa.driverType = AudioDriverType_WinMM;
        else if ( (strTemp == "DIRECTSOUND") || (strTemp == "DSOUND") )
            aa.driverType = AudioDriverType_DirectSound;
        else if (strTemp == "SOLAUDIO") /* Deprecated -- Solaris will use OSS by default now. */
            aa.driverType = AudioDriverType_SolAudio;
        else if (strTemp == "ALSA")
            aa.driverType = AudioDriverType_ALSA;
        else if (strTemp == "PULSE")
            aa.driverType = AudioDriverType_Pulse;
        else if (strTemp == "OSS")
            aa.driverType = AudioDriverType_OSS;
        else if (strTemp == "COREAUDIO")
            aa.driverType = AudioDriverType_CoreAudio;
        else if (strTemp == "MMPM")
            aa.driverType = AudioDriverType_MMPM;
        else
            throw ConfigFileError(this, &elmAudioAdapter, N_("Invalid value '%s' in AudioAdapter/@driver attribute"), strTemp.c_str());

        // now check if this is actually supported on the current host platform;
        // people might be opening a file created on a Windows host, and that
        // VM should still start on a Linux host
        if (!isAudioDriverAllowedOnThisHost(aa.driverType))
            aa.driverType = getHostDefaultAudioDriver();
    }
}

/**
 * Called from MachineConfigFile::readHardware() to read guest property information.
 * @param elmGuestProperties
 * @param hw
 */
void MachineConfigFile::readGuestProperties(const xml::ElementNode &elmGuestProperties,
                                            Hardware &hw)
{
    xml::NodesLoop nl1(elmGuestProperties, "GuestProperty");
    const xml::ElementNode *pelmProp;
    while ((pelmProp = nl1.forAllNodes()))
    {
        GuestProperty prop;
        pelmProp->getAttributeValue("name", prop.strName);
        pelmProp->getAttributeValue("value", prop.strValue);

        pelmProp->getAttributeValue("timestamp", prop.timestamp);
        pelmProp->getAttributeValue("flags", prop.strFlags);
        hw.llGuestProperties.push_back(prop);
    }
}

/**
 * Helper function to read attributes that are common to \<SATAController\> (pre-1.7)
 * and \<StorageController\>.
 * @param elmStorageController
 * @param sctl
 */
void MachineConfigFile::readStorageControllerAttributes(const xml::ElementNode &elmStorageController,
                                                        StorageController &sctl)
{
    elmStorageController.getAttributeValue("PortCount", sctl.ulPortCount);
    elmStorageController.getAttributeValue("useHostIOCache", sctl.fUseHostIOCache);
}

/**
 * Reads in a \<Hardware\> block and stores it in the given structure. Used
 * both directly from readMachine and from readSnapshot, since snapshots
 * have their own hardware sections.
 *
 * For legacy pre-1.7 settings we also need a storage structure because
 * the IDE and SATA controllers used to be defined under \<Hardware\>.
 *
 * @param elmHardware
 * @param hw
 */
void MachineConfigFile::readHardware(const xml::ElementNode &elmHardware,
                                     Hardware &hw)
{
    if (m->sv >= SettingsVersion_v1_16)
    {
        /* Starting with VirtualBox 5.1 the default is Default, before it was
         * Legacy. This needs to matched by areParavirtDefaultSettings(). */
        hw.paravirtProvider = ParavirtProvider_Default;
        /* The new default is disabled, before it was enabled by default. */
        hw.vrdeSettings.fEnabled = false;
        /* The new default is disabled, before it was enabled by default. */
        hw.audioAdapter.fEnabled = false;
    }

    if (m->sv >= SettingsVersion_v1_17)
    {
        /* Starting with VirtualBox 5.2 the default is disabled, before it was
         * enabled. This needs to matched by AudioAdapter::areDefaultSettings(). */
        hw.audioAdapter.fEnabledIn = false;
        /* The new default is disabled, before it was enabled by default. */
        hw.audioAdapter.fEnabledOut = false;
    }

    if (!elmHardware.getAttributeValue("version", hw.strVersion))
    {
        /* KLUDGE ALERT!  For a while during the 3.1 development this was not
           written because it was thought to have a default value of "2".  For
           sv <= 1.3 it defaults to "1" because the attribute didn't exist,
           while for 1.4+ it is sort of mandatory.  Now, the buggy XML writer
           code only wrote 1.7 and later.  So, if it's a 1.7+ XML file and it's
           missing the hardware version, then it probably should be "2" instead
           of "1". */
        if (m->sv < SettingsVersion_v1_7)
            hw.strVersion = "1";
        else
            hw.strVersion = "2";
    }
    Utf8Str strUUID;
    if (elmHardware.getAttributeValue("uuid", strUUID))
        parseUUID(hw.uuid, strUUID, &elmHardware);

    xml::NodesLoop nl1(elmHardware);
    const xml::ElementNode *pelmHwChild;
    while ((pelmHwChild = nl1.forAllNodes()))
    {
        if (pelmHwChild->nameEquals("CPU"))
        {
            if (!pelmHwChild->getAttributeValue("count", hw.cCPUs))
            {
                // pre-1.5 variant; not sure if this actually exists in the wild anywhere
                const xml::ElementNode *pelmCPUChild;
                if ((pelmCPUChild = pelmHwChild->findChildElement("CPUCount")))
                    pelmCPUChild->getAttributeValue("count", hw.cCPUs);
            }

            pelmHwChild->getAttributeValue("hotplug", hw.fCpuHotPlug);
            pelmHwChild->getAttributeValue("executionCap", hw.ulCpuExecutionCap);

            const xml::ElementNode *pelmCPUChild;
            if (hw.fCpuHotPlug)
            {
                if ((pelmCPUChild = pelmHwChild->findChildElement("CpuTree")))
                    readCpuTree(*pelmCPUChild, hw.llCpus);
            }

            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtEx")))
            {
                pelmCPUChild->getAttributeValue("enabled", hw.fHardwareVirt);
            }
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExNestedPaging")))
                pelmCPUChild->getAttributeValue("enabled", hw.fNestedPaging);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExLargePages")))
                pelmCPUChild->getAttributeValue("enabled", hw.fLargePages);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExVPID")))
                pelmCPUChild->getAttributeValue("enabled", hw.fVPID);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExUX")))
                pelmCPUChild->getAttributeValue("enabled", hw.fUnrestrictedExecution);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtForce")))
                pelmCPUChild->getAttributeValue("enabled", hw.fHardwareVirtForce);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExUseNativeApi")))
                pelmCPUChild->getAttributeValue("enabled", hw.fUseNativeApi);
            if ((pelmCPUChild = pelmHwChild->findChildElement("HardwareVirtExVirtVmsaveVmload")))
                pelmCPUChild->getAttributeValue("enabled", hw.fVirtVmsaveVmload);

            if (!(pelmCPUChild = pelmHwChild->findChildElement("PAE")))
            {
                /* The default for pre 3.1 was false, so we must respect that. */
                if (m->sv < SettingsVersion_v1_9)
                    hw.fPAE = false;
            }
            else
                pelmCPUChild->getAttributeValue("enabled", hw.fPAE);

            bool fLongMode;
            if (   (pelmCPUChild = pelmHwChild->findChildElement("LongMode"))
                && pelmCPUChild->getAttributeValue("enabled", fLongMode) )
                hw.enmLongMode = fLongMode ? Hardware::LongMode_Enabled : Hardware::LongMode_Disabled;
            else
                hw.enmLongMode = Hardware::LongMode_Legacy;

            if ((pelmCPUChild = pelmHwChild->findChildElement("SyntheticCpu")))
            {
                bool fSyntheticCpu = false;
                pelmCPUChild->getAttributeValue("enabled", fSyntheticCpu);
                hw.uCpuIdPortabilityLevel = fSyntheticCpu ? 1 : 0;
            }
            pelmHwChild->getAttributeValue("CpuIdPortabilityLevel", hw.uCpuIdPortabilityLevel);
            pelmHwChild->getAttributeValue("CpuProfile", hw.strCpuProfile);

            if ((pelmCPUChild = pelmHwChild->findChildElement("TripleFaultReset")))
                pelmCPUChild->getAttributeValue("enabled", hw.fTripleFaultReset);

            if ((pelmCPUChild = pelmHwChild->findChildElement("APIC")))
                pelmCPUChild->getAttributeValue("enabled", hw.fAPIC);
            if ((pelmCPUChild = pelmHwChild->findChildElement("X2APIC")))
                pelmCPUChild->getAttributeValue("enabled", hw.fX2APIC);
            if (hw.fX2APIC)
                hw.fAPIC = true;
            pelmCPUChild = pelmHwChild->findChildElement("IBPBOn");
            if (pelmCPUChild)
            {
                pelmCPUChild->getAttributeValue("vmexit", hw.fIBPBOnVMExit);
                pelmCPUChild->getAttributeValue("vmentry", hw.fIBPBOnVMEntry);
            }
            pelmCPUChild = pelmHwChild->findChildElement("SpecCtrl");
            if (pelmCPUChild)
                pelmCPUChild->getAttributeValue("enabled", hw.fSpecCtrl);
            pelmCPUChild = pelmHwChild->findChildElement("SpecCtrlByHost");
            if (pelmCPUChild)
                pelmCPUChild->getAttributeValue("enabled", hw.fSpecCtrlByHost);
            pelmCPUChild = pelmHwChild->findChildElement("L1DFlushOn");
            if (pelmCPUChild)
            {
                pelmCPUChild->getAttributeValue("scheduling", hw.fL1DFlushOnSched);
                pelmCPUChild->getAttributeValue("vmentry", hw.fL1DFlushOnVMEntry);
            }
            pelmCPUChild = pelmHwChild->findChildElement("MDSClearOn");
            if (pelmCPUChild)
            {
                pelmCPUChild->getAttributeValue("scheduling", hw.fMDSClearOnSched);
                pelmCPUChild->getAttributeValue("vmentry", hw.fMDSClearOnVMEntry);
            }
            pelmCPUChild = pelmHwChild->findChildElement("NestedHWVirt");
            if (pelmCPUChild)
                pelmCPUChild->getAttributeValue("enabled", hw.fNestedHWVirt);

            if ((pelmCPUChild = pelmHwChild->findChildElement("CpuIdTree")))
                readCpuIdTree(*pelmCPUChild, hw.llCpuIdLeafs);
        }
        else if (pelmHwChild->nameEquals("Memory"))
        {
            pelmHwChild->getAttributeValue("RAMSize", hw.ulMemorySizeMB);
            pelmHwChild->getAttributeValue("PageFusion", hw.fPageFusionEnabled);
        }
        else if (pelmHwChild->nameEquals("Firmware"))
        {
            Utf8Str strFirmwareType;
            if (pelmHwChild->getAttributeValue("type", strFirmwareType))
            {
                if (    (strFirmwareType == "BIOS")
                     || (strFirmwareType == "1")                // some trunk builds used the number here
                   )
                    hw.firmwareType = FirmwareType_BIOS;
                else if (    (strFirmwareType == "EFI")
                          || (strFirmwareType == "2")           // some trunk builds used the number here
                        )
                    hw.firmwareType = FirmwareType_EFI;
                else if (    strFirmwareType == "EFI32")
                    hw.firmwareType = FirmwareType_EFI32;
                else if (    strFirmwareType == "EFI64")
                    hw.firmwareType = FirmwareType_EFI64;
                else if (    strFirmwareType == "EFIDUAL")
                    hw.firmwareType = FirmwareType_EFIDUAL;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in Firmware/@type"),
                                          strFirmwareType.c_str());
            }
        }
        else if (pelmHwChild->nameEquals("HID"))
        {
            Utf8Str strHIDType;
            if (pelmHwChild->getAttributeValue("Keyboard", strHIDType))
            {
                if (strHIDType == "None")
                    hw.keyboardHIDType = KeyboardHIDType_None;
                else if (strHIDType == "USBKeyboard")
                    hw.keyboardHIDType = KeyboardHIDType_USBKeyboard;
                else if (strHIDType == "PS2Keyboard")
                    hw.keyboardHIDType = KeyboardHIDType_PS2Keyboard;
                else if (strHIDType == "ComboKeyboard")
                    hw.keyboardHIDType = KeyboardHIDType_ComboKeyboard;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in HID/Keyboard/@type"),
                                          strHIDType.c_str());
            }
            if (pelmHwChild->getAttributeValue("Pointing", strHIDType))
            {
                 if (strHIDType == "None")
                    hw.pointingHIDType = PointingHIDType_None;
                else if (strHIDType == "USBMouse")
                    hw.pointingHIDType = PointingHIDType_USBMouse;
                else if (strHIDType == "USBTablet")
                    hw.pointingHIDType = PointingHIDType_USBTablet;
                else if (strHIDType == "PS2Mouse")
                    hw.pointingHIDType = PointingHIDType_PS2Mouse;
                else if (strHIDType == "ComboMouse")
                    hw.pointingHIDType = PointingHIDType_ComboMouse;
                else if (strHIDType == "USBMultiTouch")
                    hw.pointingHIDType = PointingHIDType_USBMultiTouch;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in HID/Pointing/@type"),
                                          strHIDType.c_str());
            }
        }
        else if (pelmHwChild->nameEquals("Chipset"))
        {
            Utf8Str strChipsetType;
            if (pelmHwChild->getAttributeValue("type", strChipsetType))
            {
                if (strChipsetType == "PIIX3")
                    hw.chipsetType = ChipsetType_PIIX3;
                else if (strChipsetType == "ICH9")
                    hw.chipsetType = ChipsetType_ICH9;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in Chipset/@type"),
                                          strChipsetType.c_str());
            }
        }
        else if (pelmHwChild->nameEquals("Iommu"))
        {
            Utf8Str strIommuType;
            if (pelmHwChild->getAttributeValue("type", strIommuType))
            {
                if (strIommuType == "None")
                    hw.iommuType = IommuType_None;
                else if (strIommuType == "Automatic")
                    hw.iommuType = IommuType_Automatic;
                else if (strIommuType == "AMD")
                    hw.iommuType = IommuType_AMD;
                else if (strIommuType == "Intel")
                    hw.iommuType = IommuType_Intel;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in Iommu/@type"),
                                          strIommuType.c_str());
            }
        }
        else if (pelmHwChild->nameEquals("Paravirt"))
        {
            Utf8Str strProvider;
            if (pelmHwChild->getAttributeValue("provider", strProvider))
            {
                if (strProvider == "None")
                    hw.paravirtProvider = ParavirtProvider_None;
                else if (strProvider == "Default")
                    hw.paravirtProvider = ParavirtProvider_Default;
                else if (strProvider == "Legacy")
                    hw.paravirtProvider = ParavirtProvider_Legacy;
                else if (strProvider == "Minimal")
                    hw.paravirtProvider = ParavirtProvider_Minimal;
                else if (strProvider == "HyperV")
                    hw.paravirtProvider = ParavirtProvider_HyperV;
                else if (strProvider == "KVM")
                    hw.paravirtProvider = ParavirtProvider_KVM;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in Paravirt/@provider attribute"),
                                          strProvider.c_str());
            }

            pelmHwChild->getAttributeValue("debug", hw.strParavirtDebug);
        }
        else if (pelmHwChild->nameEquals("HPET"))
        {
            pelmHwChild->getAttributeValue("enabled", hw.fHPETEnabled);
        }
        else if (pelmHwChild->nameEquals("Boot"))
        {
            hw.mapBootOrder.clear();

            xml::NodesLoop nl2(*pelmHwChild, "Order");
            const xml::ElementNode *pelmOrder;
            while ((pelmOrder = nl2.forAllNodes()))
            {
                uint32_t ulPos;
                Utf8Str strDevice;
                if (!pelmOrder->getAttributeValue("position", ulPos))
                    throw ConfigFileError(this, pelmOrder, N_("Required Boot/Order/@position attribute is missing"));

                if (    ulPos < 1
                     || ulPos > SchemaDefs::MaxBootPosition
                   )
                    throw ConfigFileError(this,
                                          pelmOrder,
                                          N_("Invalid value '%RU32' in Boot/Order/@position: must be greater than 0 and less than %RU32"),
                                          ulPos,
                                          SchemaDefs::MaxBootPosition + 1);
                // XML is 1-based but internal data is 0-based
                --ulPos;

                if (hw.mapBootOrder.find(ulPos) != hw.mapBootOrder.end())
                    throw ConfigFileError(this, pelmOrder, N_("Invalid value '%RU32' in Boot/Order/@position: value is not unique"), ulPos);

                if (!pelmOrder->getAttributeValue("device", strDevice))
                    throw ConfigFileError(this, pelmOrder, N_("Required Boot/Order/@device attribute is missing"));

                DeviceType_T type;
                if (strDevice == "None")
                    type = DeviceType_Null;
                else if (strDevice == "Floppy")
                    type = DeviceType_Floppy;
                else if (strDevice == "DVD")
                    type = DeviceType_DVD;
                else if (strDevice == "HardDisk")
                    type = DeviceType_HardDisk;
                else if (strDevice == "Network")
                    type = DeviceType_Network;
                else
                    throw ConfigFileError(this, pelmOrder, N_("Invalid value '%s' in Boot/Order/@device attribute"), strDevice.c_str());
                hw.mapBootOrder[ulPos] = type;
            }
        }
        else if (pelmHwChild->nameEquals("Display"))
        {
            Utf8Str strGraphicsControllerType;
            if (!pelmHwChild->getAttributeValue("controller", strGraphicsControllerType))
                hw.graphicsAdapter.graphicsControllerType = GraphicsControllerType_VBoxVGA;
            else
            {
                strGraphicsControllerType.toUpper();
                GraphicsControllerType_T type;
                if (strGraphicsControllerType == "VBOXVGA")
                    type = GraphicsControllerType_VBoxVGA;
                else if (strGraphicsControllerType == "VMSVGA")
                    type = GraphicsControllerType_VMSVGA;
                else if (strGraphicsControllerType == "VBOXSVGA")
                    type = GraphicsControllerType_VBoxSVGA;
                else if (strGraphicsControllerType == "NONE")
                    type = GraphicsControllerType_Null;
                else
                    throw ConfigFileError(this, pelmHwChild, N_("Invalid value '%s' in Display/@controller attribute"), strGraphicsControllerType.c_str());
                hw.graphicsAdapter.graphicsControllerType = type;
            }
            pelmHwChild->getAttributeValue("VRAMSize", hw.graphicsAdapter.ulVRAMSizeMB);
            if (!pelmHwChild->getAttributeValue("monitorCount", hw.graphicsAdapter.cMonitors))
                pelmHwChild->getAttributeValue("MonitorCount", hw.graphicsAdapter.cMonitors);       // pre-v1.5 variant
            if (!pelmHwChild->getAttributeValue("accelerate3D", hw.graphicsAdapter.fAccelerate3D))
                pelmHwChild->getAttributeValue("Accelerate3D", hw.graphicsAdapter.fAccelerate3D);   // pre-v1.5 variant
            pelmHwChild->getAttributeValue("accelerate2DVideo", hw.graphicsAdapter.fAccelerate2DVideo);
        }
        else if (pelmHwChild->nameEquals("VideoCapture"))
        {
            pelmHwChild->getAttributeValue("enabled",   hw.recordingSettings.fEnabled);

            /* Right now I don't want to bump the settings version, so just convert the enabled
             * screens to the former uint64t_t bit array and vice versa. */
            uint64_t u64VideoCaptureScreens;
            pelmHwChild->getAttributeValue("screens",   u64VideoCaptureScreens);

            /* At the moment we only support one capturing configuration, that is, all screens
             * have the same configuration. So load/save to/from screen 0. */
            Assert(hw.recordingSettings.mapScreens.size()); /* At least screen must be present. */
            RecordingScreenSettings &screen0Settings = hw.recordingSettings.mapScreens[0];

            pelmHwChild->getAttributeValue("maxTime",   screen0Settings.ulMaxTimeS);
            pelmHwChild->getAttributeValue("options",   screen0Settings.strOptions);
            pelmHwChild->getAttributeValuePath("file",  screen0Settings.File.strName);
            pelmHwChild->getAttributeValue("maxSize",   screen0Settings.File.ulMaxSizeMB);
            pelmHwChild->getAttributeValue("horzRes",   screen0Settings.Video.ulWidth);
            pelmHwChild->getAttributeValue("vertRes",   screen0Settings.Video.ulHeight);
            pelmHwChild->getAttributeValue("rate",      screen0Settings.Video.ulRate);
            pelmHwChild->getAttributeValue("fps",       screen0Settings.Video.ulFPS);

            for (unsigned i = 0; i < hw.graphicsAdapter.cMonitors; i++) /* Don't add more settings than we have monitors configured. */
            {
                /* Add screen i to config in any case. */
                hw.recordingSettings.mapScreens[i] = screen0Settings;

                if (u64VideoCaptureScreens & RT_BIT_64(i)) /* Screen i enabled? */
                    hw.recordingSettings.mapScreens[i].fEnabled = true;
            }
        }
        else if (pelmHwChild->nameEquals("RemoteDisplay"))
        {
            pelmHwChild->getAttributeValue("enabled", hw.vrdeSettings.fEnabled);

            Utf8Str str;
            if (pelmHwChild->getAttributeValue("port", str))
                hw.vrdeSettings.mapProperties["TCP/Ports"] = str;
            if (pelmHwChild->getAttributeValue("netAddress", str))
                hw.vrdeSettings.mapProperties["TCP/Address"] = str;

            Utf8Str strAuthType;
            if (pelmHwChild->getAttributeValue("authType", strAuthType))
            {
                // settings before 1.3 used lower case so make sure this is case-insensitive
                strAuthType.toUpper();
                if (strAuthType == "NULL")
                    hw.vrdeSettings.authType = AuthType_Null;
                else if (strAuthType == "GUEST")
                    hw.vrdeSettings.authType = AuthType_Guest;
                else if (strAuthType == "EXTERNAL")
                    hw.vrdeSettings.authType = AuthType_External;
                else
                    throw ConfigFileError(this, pelmHwChild, N_("Invalid value '%s' in RemoteDisplay/@authType attribute"), strAuthType.c_str());
            }

            pelmHwChild->getAttributeValue("authLibrary", hw.vrdeSettings.strAuthLibrary);
            pelmHwChild->getAttributeValue("authTimeout", hw.vrdeSettings.ulAuthTimeout);
            pelmHwChild->getAttributeValue("allowMultiConnection", hw.vrdeSettings.fAllowMultiConnection);
            pelmHwChild->getAttributeValue("reuseSingleConnection", hw.vrdeSettings.fReuseSingleConnection);

            /* 3.2 and 4.0 betas, 4.0 has this information in VRDEProperties. */
            const xml::ElementNode *pelmVideoChannel;
            if ((pelmVideoChannel = pelmHwChild->findChildElement("VideoChannel")))
            {
                bool fVideoChannel = false;
                pelmVideoChannel->getAttributeValue("enabled", fVideoChannel);
                hw.vrdeSettings.mapProperties["VideoChannel/Enabled"] = fVideoChannel? "true": "false";

                uint32_t ulVideoChannelQuality = 75;
                pelmVideoChannel->getAttributeValue("quality", ulVideoChannelQuality);
                ulVideoChannelQuality = RT_CLAMP(ulVideoChannelQuality, 10, 100);
                char *pszBuffer = NULL;
                if (RTStrAPrintf(&pszBuffer, "%d", ulVideoChannelQuality) >= 0)
                {
                    hw.vrdeSettings.mapProperties["VideoChannel/Quality"] = pszBuffer;
                    RTStrFree(pszBuffer);
                }
                else
                    hw.vrdeSettings.mapProperties["VideoChannel/Quality"] = "75";
            }
            pelmHwChild->getAttributeValue("VRDEExtPack", hw.vrdeSettings.strVrdeExtPack);

            const xml::ElementNode *pelmProperties = pelmHwChild->findChildElement("VRDEProperties");
            if (pelmProperties != NULL)
            {
                xml::NodesLoop nl(*pelmProperties);
                const xml::ElementNode *pelmProperty;
                while ((pelmProperty = nl.forAllNodes()))
                {
                    if (pelmProperty->nameEquals("Property"))
                    {
                        /* <Property name="TCP/Ports" value="3000-3002"/> */
                        Utf8Str strName, strValue;
                        if (   pelmProperty->getAttributeValue("name", strName)
                            && pelmProperty->getAttributeValue("value", strValue))
                            hw.vrdeSettings.mapProperties[strName] = strValue;
                        else
                            throw ConfigFileError(this, pelmProperty, N_("Required VRDE Property/@name or @value attribute is missing"));
                    }
                }
            }
        }
        else if (pelmHwChild->nameEquals("BIOS"))
        {
            const xml::ElementNode *pelmBIOSChild;
            if ((pelmBIOSChild = pelmHwChild->findChildElement("ACPI")))
                pelmBIOSChild->getAttributeValue("enabled", hw.biosSettings.fACPIEnabled);
            if ((pelmBIOSChild = pelmHwChild->findChildElement("IOAPIC")))
                pelmBIOSChild->getAttributeValue("enabled", hw.biosSettings.fIOAPICEnabled);
            if ((pelmBIOSChild = pelmHwChild->findChildElement("APIC")))
            {
                Utf8Str strAPIC;
                if (pelmBIOSChild->getAttributeValue("mode", strAPIC))
                {
                    strAPIC.toUpper();
                    if (strAPIC == "DISABLED")
                        hw.biosSettings.apicMode = APICMode_Disabled;
                    else if (strAPIC == "APIC")
                        hw.biosSettings.apicMode = APICMode_APIC;
                    else if (strAPIC == "X2APIC")
                        hw.biosSettings.apicMode = APICMode_X2APIC;
                    else
                        throw ConfigFileError(this, pelmBIOSChild, N_("Invalid value '%s' in APIC/@mode attribute"), strAPIC.c_str());
                }
            }
            if ((pelmBIOSChild = pelmHwChild->findChildElement("Logo")))
            {
                pelmBIOSChild->getAttributeValue("fadeIn", hw.biosSettings.fLogoFadeIn);
                pelmBIOSChild->getAttributeValue("fadeOut", hw.biosSettings.fLogoFadeOut);
                pelmBIOSChild->getAttributeValue("displayTime", hw.biosSettings.ulLogoDisplayTime);
                pelmBIOSChild->getAttributeValue("imagePath", hw.biosSettings.strLogoImagePath);
            }
            if ((pelmBIOSChild = pelmHwChild->findChildElement("BootMenu")))
            {
                Utf8Str strBootMenuMode;
                if (pelmBIOSChild->getAttributeValue("mode", strBootMenuMode))
                {
                    // settings before 1.3 used lower case so make sure this is case-insensitive
                    strBootMenuMode.toUpper();
                    if (strBootMenuMode == "DISABLED")
                        hw.biosSettings.biosBootMenuMode = BIOSBootMenuMode_Disabled;
                    else if (strBootMenuMode == "MENUONLY")
                        hw.biosSettings.biosBootMenuMode = BIOSBootMenuMode_MenuOnly;
                    else if (strBootMenuMode == "MESSAGEANDMENU")
                        hw.biosSettings.biosBootMenuMode = BIOSBootMenuMode_MessageAndMenu;
                    else
                        throw ConfigFileError(this, pelmBIOSChild, N_("Invalid value '%s' in BootMenu/@mode attribute"), strBootMenuMode.c_str());
                }
            }
            if ((pelmBIOSChild = pelmHwChild->findChildElement("PXEDebug")))
                pelmBIOSChild->getAttributeValue("enabled", hw.biosSettings.fPXEDebugEnabled);
            if ((pelmBIOSChild = pelmHwChild->findChildElement("TimeOffset")))
                pelmBIOSChild->getAttributeValue("value", hw.biosSettings.llTimeOffset);
            if ((pelmBIOSChild = pelmHwChild->findChildElement("NVRAM")))
                pelmBIOSChild->getAttributeValue("path", hw.nvramSettings.strNvramPath);
            if ((pelmBIOSChild = pelmHwChild->findChildElement("SmbiosUuidLittleEndian")))
                pelmBIOSChild->getAttributeValue("enabled", hw.biosSettings.fSmbiosUuidLittleEndian);
            else
                hw.biosSettings.fSmbiosUuidLittleEndian = false; /* Default for existing VMs. */

            // legacy BIOS/IDEController (pre 1.7)
            if (    (m->sv < SettingsVersion_v1_7)
                 && (pelmBIOSChild = pelmHwChild->findChildElement("IDEController"))
               )
            {
                StorageController sctl;
                sctl.strName = "IDE Controller";
                sctl.storageBus = StorageBus_IDE;

                Utf8Str strType;
                if (pelmBIOSChild->getAttributeValue("type", strType))
                {
                    if (strType == "PIIX3")
                        sctl.controllerType = StorageControllerType_PIIX3;
                    else if (strType == "PIIX4")
                        sctl.controllerType = StorageControllerType_PIIX4;
                    else if (strType == "ICH6")
                        sctl.controllerType = StorageControllerType_ICH6;
                    else
                        throw ConfigFileError(this, pelmBIOSChild, N_("Invalid value '%s' for IDEController/@type attribute"), strType.c_str());
                }
                sctl.ulPortCount = 2;
                hw.storage.llStorageControllers.push_back(sctl);
            }
        }
        else if (pelmHwChild->nameEquals("TrustedPlatformModule"))
        {
            Utf8Str strTpmType;
            if (pelmHwChild->getAttributeValue("type", strTpmType))
            {
                if (strTpmType == "None")
                    hw.tpmSettings.tpmType = TpmType_None;
                else if (strTpmType == "v1_2")
                    hw.tpmSettings.tpmType = TpmType_v1_2;
                else if (strTpmType == "v2_0")
                    hw.tpmSettings.tpmType = TpmType_v2_0;
                else if (strTpmType == "Host")
                    hw.tpmSettings.tpmType = TpmType_Host;
                else if (strTpmType == "Swtpm")
                    hw.tpmSettings.tpmType = TpmType_Swtpm;
                else
                    throw ConfigFileError(this,
                                          pelmHwChild,
                                          N_("Invalid value '%s' in TrustedPlatformModule/@type"),
                                          strTpmType.c_str());
            }

            pelmHwChild->getAttributeValue("location", hw.tpmSettings.strLocation);
        }
        else if (   (m->sv <= SettingsVersion_v1_14)
                 && pelmHwChild->nameEquals("USBController"))
        {
            bool fEnabled = false;

            pelmHwChild->getAttributeValue("enabled", fEnabled);
            if (fEnabled)
            {
                /* Create OHCI controller with default name. */
                USBController ctrl;

                ctrl.strName = "OHCI";
                ctrl.enmType = USBControllerType_OHCI;
                hw.usbSettings.llUSBControllers.push_back(ctrl);
            }

            pelmHwChild->getAttributeValue("enabledEhci", fEnabled);
            if (fEnabled)
            {
                /* Create OHCI controller with default name. */
                USBController ctrl;

                ctrl.strName = "EHCI";
                ctrl.enmType = USBControllerType_EHCI;
                hw.usbSettings.llUSBControllers.push_back(ctrl);
            }

            readUSBDeviceFilters(*pelmHwChild,
                                 hw.usbSettings.llDeviceFilters);
        }
        else if (pelmHwChild->nameEquals("USB"))
        {
            const xml::ElementNode *pelmUSBChild;

            if ((pelmUSBChild = pelmHwChild->findChildElement("Controllers")))
            {
                xml::NodesLoop nl2(*pelmUSBChild, "Controller");
                const xml::ElementNode *pelmCtrl;

                while ((pelmCtrl = nl2.forAllNodes()))
                {
                    USBController ctrl;
                    com::Utf8Str strCtrlType;

                    pelmCtrl->getAttributeValue("name", ctrl.strName);

                    if (pelmCtrl->getAttributeValue("type", strCtrlType))
                    {
                        if (strCtrlType == "OHCI")
                            ctrl.enmType = USBControllerType_OHCI;
                        else if (strCtrlType == "EHCI")
                            ctrl.enmType = USBControllerType_EHCI;
                        else if (strCtrlType == "XHCI")
                            ctrl.enmType = USBControllerType_XHCI;
                        else
                            throw ConfigFileError(this, pelmCtrl, N_("Invalid value '%s' for Controller/@type attribute"), strCtrlType.c_str());
                    }

                    hw.usbSettings.llUSBControllers.push_back(ctrl);
                }
            }

            if ((pelmUSBChild = pelmHwChild->findChildElement("DeviceFilters")))
                readUSBDeviceFilters(*pelmUSBChild, hw.usbSettings.llDeviceFilters);
        }
        else if (   m->sv < SettingsVersion_v1_7
                 && pelmHwChild->nameEquals("SATAController"))
        {
            bool f;
            if (   pelmHwChild->getAttributeValue("enabled", f)
                && f)
            {
                StorageController sctl;
                sctl.strName = "SATA Controller";
                sctl.storageBus = StorageBus_SATA;
                sctl.controllerType = StorageControllerType_IntelAhci;

                readStorageControllerAttributes(*pelmHwChild, sctl);

                hw.storage.llStorageControllers.push_back(sctl);
            }
        }
        else if (pelmHwChild->nameEquals("Network"))
            readNetworkAdapters(*pelmHwChild, hw.llNetworkAdapters);
        else if (pelmHwChild->nameEquals("RTC"))
        {
            Utf8Str strLocalOrUTC;
            machineUserData.fRTCUseUTC = pelmHwChild->getAttributeValue("localOrUTC", strLocalOrUTC)
                                      && strLocalOrUTC == "UTC";
        }
        else if (    pelmHwChild->nameEquals("UART")
                  || pelmHwChild->nameEquals("Uart")      // used before 1.3
                )
            readSerialPorts(*pelmHwChild, hw.llSerialPorts);
        else if (    pelmHwChild->nameEquals("LPT")
                  || pelmHwChild->nameEquals("Lpt")       // used before 1.3
                )
            readParallelPorts(*pelmHwChild, hw.llParallelPorts);
        else if (pelmHwChild->nameEquals("AudioAdapter"))
            readAudioAdapter(*pelmHwChild, hw.audioAdapter);
        else if (pelmHwChild->nameEquals("SharedFolders"))
        {
            xml::NodesLoop nl2(*pelmHwChild, "SharedFolder");
            const xml::ElementNode *pelmFolder;
            while ((pelmFolder = nl2.forAllNodes()))
            {
                SharedFolder sf;
                pelmFolder->getAttributeValue("name", sf.strName);
                pelmFolder->getAttributeValue("hostPath", sf.strHostPath);
                pelmFolder->getAttributeValue("writable", sf.fWritable);
                pelmFolder->getAttributeValue("autoMount", sf.fAutoMount);
                pelmFolder->getAttributeValue("autoMountPoint", sf.strAutoMountPoint);
                hw.llSharedFolders.push_back(sf);
            }
        }
        else if (pelmHwChild->nameEquals("Clipboard"))
        {
            Utf8Str strTemp;
            if (pelmHwChild->getAttributeValue("mode", strTemp))
            {
                if (strTemp == "Disabled")
                    hw.clipboardMode = ClipboardMode_Disabled;
                else if (strTemp == "HostToGuest")
                    hw.clipboardMode = ClipboardMode_HostToGuest;
                else if (strTemp == "GuestToHost")
                    hw.clipboardMode = ClipboardMode_GuestToHost;
                else if (strTemp == "Bidirectional")
                    hw.clipboardMode = ClipboardMode_Bidirectional;
                else
                    throw ConfigFileError(this, pelmHwChild, N_("Invalid value '%s' in Clipboard/@mode attribute"), strTemp.c_str());
            }

            pelmHwChild->getAttributeValue("fileTransfersEnabled", hw.fClipboardFileTransfersEnabled);
        }
        else if (pelmHwChild->nameEquals("DragAndDrop"))
        {
            Utf8Str strTemp;
            if (pelmHwChild->getAttributeValue("mode", strTemp))
            {
                if (strTemp == "Disabled")
                    hw.dndMode = DnDMode_Disabled;
                else if (strTemp == "HostToGuest")
                    hw.dndMode = DnDMode_HostToGuest;
                else if (strTemp == "GuestToHost")
                    hw.dndMode = DnDMode_GuestToHost;
                else if (strTemp == "Bidirectional")
                    hw.dndMode = DnDMode_Bidirectional;
                else
                    throw ConfigFileError(this, pelmHwChild, N_("Invalid value '%s' in DragAndDrop/@mode attribute"), strTemp.c_str());
            }
        }
        else if (pelmHwChild->nameEquals("Guest"))
        {
            if (!pelmHwChild->getAttributeValue("memoryBalloonSize", hw.ulMemoryBalloonSize))
                pelmHwChild->getAttributeValue("MemoryBalloonSize", hw.ulMemoryBalloonSize);            // used before 1.3
        }
        else if (pelmHwChild->nameEquals("GuestProperties"))
            readGuestProperties(*pelmHwChild, hw);
        else if (pelmHwChild->nameEquals("IO"))
        {
            const xml::ElementNode *pelmBwGroups;
            const xml::ElementNode *pelmIOChild;

            if ((pelmIOChild = pelmHwChild->findChildElement("IoCache")))
            {
                pelmIOChild->getAttributeValue("enabled", hw.ioSettings.fIOCacheEnabled);
                pelmIOChild->getAttributeValue("size", hw.ioSettings.ulIOCacheSize);
            }

            if ((pelmBwGroups = pelmHwChild->findChildElement("BandwidthGroups")))
            {
                xml::NodesLoop nl2(*pelmBwGroups, "BandwidthGroup");
                const xml::ElementNode *pelmBandwidthGroup;
                while ((pelmBandwidthGroup = nl2.forAllNodes()))
                {
                    BandwidthGroup gr;
                    Utf8Str strTemp;

                    pelmBandwidthGroup->getAttributeValue("name", gr.strName);

                    if (pelmBandwidthGroup->getAttributeValue("type", strTemp))
                    {
                        if (strTemp == "Disk")
                            gr.enmType = BandwidthGroupType_Disk;
                        else if (strTemp == "Network")
                            gr.enmType = BandwidthGroupType_Network;
                        else
                            throw ConfigFileError(this, pelmBandwidthGroup, N_("Invalid value '%s' in BandwidthGroup/@type attribute"), strTemp.c_str());
                    }
                    else
                        throw ConfigFileError(this, pelmBandwidthGroup, N_("Missing BandwidthGroup/@type attribute"));

                    if (!pelmBandwidthGroup->getAttributeValue("maxBytesPerSec", gr.cMaxBytesPerSec))
                    {
                        pelmBandwidthGroup->getAttributeValue("maxMbPerSec", gr.cMaxBytesPerSec);
                        gr.cMaxBytesPerSec *= _1M;
                    }
                    hw.ioSettings.llBandwidthGroups.push_back(gr);
                }
            }
        }
        else if (pelmHwChild->nameEquals("HostPci"))
        {
            const xml::ElementNode *pelmDevices;

            if ((pelmDevices = pelmHwChild->findChildElement("Devices")))
            {
                xml::NodesLoop nl2(*pelmDevices, "Device");
                const xml::ElementNode *pelmDevice;
                while ((pelmDevice = nl2.forAllNodes()))
                {
                    HostPCIDeviceAttachment hpda;

                    if (!pelmDevice->getAttributeValue("host", hpda.uHostAddress))
                         throw ConfigFileError(this, pelmDevice, N_("Missing Device/@host attribute"));

                    if (!pelmDevice->getAttributeValue("guest", hpda.uGuestAddress))
                         throw ConfigFileError(this, pelmDevice, N_("Missing Device/@guest attribute"));

                    /* name is optional */
                    pelmDevice->getAttributeValue("name", hpda.strDeviceName);

                    hw.pciAttachments.push_back(hpda);
                }
            }
        }
        else if (pelmHwChild->nameEquals("EmulatedUSB"))
        {
            const xml::ElementNode *pelmCardReader;

            if ((pelmCardReader = pelmHwChild->findChildElement("CardReader")))
            {
                pelmCardReader->getAttributeValue("enabled", hw.fEmulatedUSBCardReader);
            }
        }
        else if (pelmHwChild->nameEquals("Frontend"))
        {
            const xml::ElementNode *pelmDefault;

            if ((pelmDefault = pelmHwChild->findChildElement("Default")))
            {
                pelmDefault->getAttributeValue("type", hw.strDefaultFrontend);
            }
        }
        else if (pelmHwChild->nameEquals("StorageControllers"))
            readStorageControllers(*pelmHwChild, hw.storage);
    }

    if (hw.ulMemorySizeMB == (uint32_t)-1)
        throw ConfigFileError(this, &elmHardware, N_("Required Memory/@RAMSize element/attribute is missing"));
}

/**
 * This gets called instead of readStorageControllers() for legacy pre-1.7 settings
 * files which have a \<HardDiskAttachments\> node and storage controller settings
 * hidden in the \<Hardware\> settings. We set the StorageControllers fields just the
 * same, just from different sources.
 * @param elmHardDiskAttachments  \<HardDiskAttachments\> XML node.
 * @param strg
 */
void MachineConfigFile::readHardDiskAttachments_pre1_7(const xml::ElementNode &elmHardDiskAttachments,
                                                       Storage &strg)
{
    StorageController *pIDEController = NULL;
    StorageController *pSATAController = NULL;

    for (StorageControllersList::iterator it = strg.llStorageControllers.begin();
         it != strg.llStorageControllers.end();
         ++it)
    {
        StorageController &s = *it;
        if (s.storageBus == StorageBus_IDE)
            pIDEController = &s;
        else if (s.storageBus == StorageBus_SATA)
            pSATAController = &s;
    }

    xml::NodesLoop nl1(elmHardDiskAttachments, "HardDiskAttachment");
    const xml::ElementNode *pelmAttachment;
    while ((pelmAttachment = nl1.forAllNodes()))
    {
        AttachedDevice att;
        Utf8Str strUUID, strBus;

        if (!pelmAttachment->getAttributeValue("hardDisk", strUUID))
            throw ConfigFileError(this, pelmAttachment, N_("Required HardDiskAttachment/@hardDisk attribute is missing"));
        parseUUID(att.uuid, strUUID, pelmAttachment);

        if (!pelmAttachment->getAttributeValue("bus", strBus))
            throw ConfigFileError(this, pelmAttachment, N_("Required HardDiskAttachment/@bus attribute is missing"));
        // pre-1.7 'channel' is now port
        if (!pelmAttachment->getAttributeValue("channel", att.lPort))
            throw ConfigFileError(this, pelmAttachment, N_("Required HardDiskAttachment/@channel attribute is missing"));
        // pre-1.7 'device' is still device
        if (!pelmAttachment->getAttributeValue("device", att.lDevice))
            throw ConfigFileError(this, pelmAttachment, N_("Required HardDiskAttachment/@device attribute is missing"));

        att.deviceType = DeviceType_HardDisk;

        if (strBus == "IDE")
        {
            if (!pIDEController)
                throw ConfigFileError(this, pelmAttachment, N_("HardDiskAttachment/@bus is 'IDE' but cannot find IDE controller"));
            pIDEController->llAttachedDevices.push_back(att);
        }
        else if (strBus == "SATA")
        {
            if (!pSATAController)
                throw ConfigFileError(this, pelmAttachment, N_("HardDiskAttachment/@bus is 'SATA' but cannot find SATA controller"));
            pSATAController->llAttachedDevices.push_back(att);
        }
        else
            throw ConfigFileError(this, pelmAttachment, N_("HardDiskAttachment/@bus attribute has illegal value '%s'"), strBus.c_str());
    }
}

/**
 * Reads in a \<StorageControllers\> block and stores it in the given Storage structure.
 * Used both directly from readMachine and from readSnapshot, since snapshots
 * have their own storage controllers sections.
 *
 * This is only called for settings version 1.7 and above; see readHardDiskAttachments_pre1_7()
 * for earlier versions.
 *
 * @param   elmStorageControllers
 * @param   strg
 */
void MachineConfigFile::readStorageControllers(const xml::ElementNode &elmStorageControllers,
                                               Storage &strg)
{
    xml::NodesLoop nlStorageControllers(elmStorageControllers, "StorageController");
    const xml::ElementNode *pelmController;
    while ((pelmController = nlStorageControllers.forAllNodes()))
    {
        StorageController sctl;

        if (!pelmController->getAttributeValue("name", sctl.strName))
            throw ConfigFileError(this, pelmController, N_("Required StorageController/@name attribute is missing"));
        //  canonicalize storage controller names for configs in the switchover
        //  period.
        if (m->sv < SettingsVersion_v1_9)
        {
            if (sctl.strName == "IDE")
                sctl.strName = "IDE Controller";
            else if (sctl.strName == "SATA")
                sctl.strName = "SATA Controller";
            else if (sctl.strName == "SCSI")
                sctl.strName = "SCSI Controller";
        }

        pelmController->getAttributeValue("Instance", sctl.ulInstance);
            // default from constructor is 0

        pelmController->getAttributeValue("Bootable", sctl.fBootable);
            // default from constructor is true which is true
            // for settings below version 1.11 because they allowed only
            // one controller per type.

        Utf8Str strType;
        if (!pelmController->getAttributeValue("type", strType))
            throw ConfigFileError(this, pelmController, N_("Required StorageController/@type attribute is missing"));

        if (strType == "AHCI")
        {
            sctl.storageBus = StorageBus_SATA;
            sctl.controllerType = StorageControllerType_IntelAhci;
        }
        else if (strType == "LsiLogic")
        {
            sctl.storageBus = StorageBus_SCSI;
            sctl.controllerType = StorageControllerType_LsiLogic;
        }
        else if (strType == "BusLogic")
        {
            sctl.storageBus = StorageBus_SCSI;
            sctl.controllerType = StorageControllerType_BusLogic;
        }
        else if (strType == "PIIX3")
        {
            sctl.storageBus = StorageBus_IDE;
            sctl.controllerType = StorageControllerType_PIIX3;
        }
        else if (strType == "PIIX4")
        {
            sctl.storageBus = StorageBus_IDE;
            sctl.controllerType = StorageControllerType_PIIX4;
        }
        else if (strType == "ICH6")
        {
            sctl.storageBus = StorageBus_IDE;
            sctl.controllerType = StorageControllerType_ICH6;
        }
        else if (   (m->sv >= SettingsVersion_v1_9)
                 && (strType == "I82078")
                )
        {
            sctl.storageBus = StorageBus_Floppy;
            sctl.controllerType = StorageControllerType_I82078;
        }
        else if (strType == "LsiLogicSas")
        {
            sctl.storageBus = StorageBus_SAS;
            sctl.controllerType = StorageControllerType_LsiLogicSas;
        }
        else if (strType == "USB")
        {
            sctl.storageBus = StorageBus_USB;
            sctl.controllerType = StorageControllerType_USB;
        }
        else if (strType == "NVMe")
        {
            sctl.storageBus = StorageBus_PCIe;
            sctl.controllerType = StorageControllerType_NVMe;
        }
        else if (strType == "VirtioSCSI")
        {
            sctl.storageBus = StorageBus_VirtioSCSI;
            sctl.controllerType = StorageControllerType_VirtioSCSI;
        }
        else
            throw ConfigFileError(this, pelmController, N_("Invalid value '%s' for StorageController/@type attribute"), strType.c_str());

        readStorageControllerAttributes(*pelmController, sctl);

        xml::NodesLoop nlAttached(*pelmController, "AttachedDevice");
        const xml::ElementNode *pelmAttached;
        while ((pelmAttached = nlAttached.forAllNodes()))
        {
            AttachedDevice att;
            Utf8Str strTemp;
            pelmAttached->getAttributeValue("type", strTemp);

            att.fDiscard = false;
            att.fNonRotational = false;
            att.fHotPluggable = false;
            att.fPassThrough = false;

            if (strTemp == "HardDisk")
            {
                att.deviceType = DeviceType_HardDisk;
                pelmAttached->getAttributeValue("nonrotational", att.fNonRotational);
                pelmAttached->getAttributeValue("discard", att.fDiscard);
            }
            else if (m->sv >= SettingsVersion_v1_9)
            {
                // starting with 1.9 we list DVD and floppy drive info + attachments under <StorageControllers>
                if (strTemp == "DVD")
                {
                    att.deviceType = DeviceType_DVD;
                    pelmAttached->getAttributeValue("passthrough", att.fPassThrough);
                    pelmAttached->getAttributeValue("tempeject", att.fTempEject);
                }
                else if (strTemp == "Floppy")
                    att.deviceType = DeviceType_Floppy;
            }

            if (att.deviceType != DeviceType_Null)
            {
                const xml::ElementNode *pelmImage;
                // all types can have images attached, but for HardDisk it's required
                if (!(pelmImage = pelmAttached->findChildElement("Image")))
                {
                    if (att.deviceType == DeviceType_HardDisk)
                        throw ConfigFileError(this, pelmImage, N_("Required AttachedDevice/Image element is missing"));
                    else
                    {
                        // DVDs and floppies can also have <HostDrive> instead of <Image>
                        const xml::ElementNode *pelmHostDrive;
                        if ((pelmHostDrive = pelmAttached->findChildElement("HostDrive")))
                            if (!pelmHostDrive->getAttributeValue("src", att.strHostDriveSrc))
                                throw ConfigFileError(this, pelmHostDrive, N_("Required AttachedDevice/HostDrive/@src attribute is missing"));
                    }
                }
                else
                {
                    if (!pelmImage->getAttributeValue("uuid", strTemp))
                        throw ConfigFileError(this, pelmImage, N_("Required AttachedDevice/Image/@uuid attribute is missing"));
                    parseUUID(att.uuid, strTemp, pelmImage);
                }

                if (!pelmAttached->getAttributeValue("port", att.lPort))
                    throw ConfigFileError(this, pelmImage, N_("Required AttachedDevice/@port attribute is missing"));
                if (!pelmAttached->getAttributeValue("device", att.lDevice))
                    throw ConfigFileError(this, pelmImage, N_("Required AttachedDevice/@device attribute is missing"));

                /* AHCI controller ports are hotpluggable by default, keep compatibility with existing settings. */
                if (m->sv >= SettingsVersion_v1_15)
                    pelmAttached->getAttributeValue("hotpluggable", att.fHotPluggable);
                else if (sctl.controllerType == StorageControllerType_IntelAhci)
                    att.fHotPluggable = true;

                pelmAttached->getAttributeValue("bandwidthGroup", att.strBwGroup);
                sctl.llAttachedDevices.push_back(att);
            }
        }

        strg.llStorageControllers.push_back(sctl);
    }
}

/**
 * This gets called for legacy pre-1.9 settings files after having parsed the
 * \<Hardware\> and \<StorageControllers\> sections to parse \<Hardware\> once more
 * for the \<DVDDrive\> and \<FloppyDrive\> sections.
 *
 * Before settings version 1.9, DVD and floppy drives were specified separately
 * under \<Hardware\>; we then need this extra loop to make sure the storage
 * controller structs are already set up so we can add stuff to them.
 *
 * @param elmHardware
 * @param strg
 */
void MachineConfigFile::readDVDAndFloppies_pre1_9(const xml::ElementNode &elmHardware,
                                                  Storage &strg)
{
    xml::NodesLoop nl1(elmHardware);
    const xml::ElementNode *pelmHwChild;
    while ((pelmHwChild = nl1.forAllNodes()))
    {
        if (pelmHwChild->nameEquals("DVDDrive"))
        {
            // create a DVD "attached device" and attach it to the existing IDE controller
            AttachedDevice att;
            att.deviceType = DeviceType_DVD;
            // legacy DVD drive is always secondary master (port 1, device 0)
            att.lPort = 1;
            att.lDevice = 0;
            pelmHwChild->getAttributeValue("passthrough", att.fPassThrough);
            pelmHwChild->getAttributeValue("tempeject", att.fTempEject);

            const xml::ElementNode *pDriveChild;
            Utf8Str strTmp;
            if (   (pDriveChild = pelmHwChild->findChildElement("Image")) != NULL
                && pDriveChild->getAttributeValue("uuid", strTmp))
                parseUUID(att.uuid, strTmp, pDriveChild);
            else if ((pDriveChild = pelmHwChild->findChildElement("HostDrive")))
                pDriveChild->getAttributeValue("src", att.strHostDriveSrc);

            // find the IDE controller and attach the DVD drive
            bool fFound = false;
            for (StorageControllersList::iterator it = strg.llStorageControllers.begin();
                 it != strg.llStorageControllers.end();
                 ++it)
            {
                StorageController &sctl = *it;
                if (sctl.storageBus == StorageBus_IDE)
                {
                    sctl.llAttachedDevices.push_back(att);
                    fFound = true;
                    break;
                }
            }

            if (!fFound)
                throw ConfigFileError(this, pelmHwChild, N_("Internal error: found DVD drive but IDE controller does not exist"));
                        // shouldn't happen because pre-1.9 settings files always had at least one IDE controller in the settings
                        // which should have gotten parsed in <StorageControllers> before this got called
        }
        else if (pelmHwChild->nameEquals("FloppyDrive"))
        {
            bool fEnabled;
            if (   pelmHwChild->getAttributeValue("enabled", fEnabled)
                && fEnabled)
            {
                // create a new floppy controller and attach a floppy "attached device"
                StorageController sctl;
                sctl.strName = "Floppy Controller";
                sctl.storageBus = StorageBus_Floppy;
                sctl.controllerType = StorageControllerType_I82078;
                sctl.ulPortCount = 1;

                AttachedDevice att;
                att.deviceType = DeviceType_Floppy;
                att.lPort = 0;
                att.lDevice = 0;

                const xml::ElementNode *pDriveChild;
                Utf8Str strTmp;
                if (   (pDriveChild = pelmHwChild->findChildElement("Image"))
                    && pDriveChild->getAttributeValue("uuid", strTmp) )
                    parseUUID(att.uuid, strTmp, pDriveChild);
                else if ((pDriveChild = pelmHwChild->findChildElement("HostDrive")))
                    pDriveChild->getAttributeValue("src", att.strHostDriveSrc);

                // store attachment with controller
                sctl.llAttachedDevices.push_back(att);
                // store controller with storage
                strg.llStorageControllers.push_back(sctl);
            }
        }
    }
}

/**
 * Called for reading the \<Teleporter\> element under \<Machine\>.
 */
void MachineConfigFile::readTeleporter(const xml::ElementNode *pElmTeleporter,
                                       MachineUserData *pUserData)
{
    pElmTeleporter->getAttributeValue("enabled", pUserData->fTeleporterEnabled);
    pElmTeleporter->getAttributeValue("port", pUserData->uTeleporterPort);
    pElmTeleporter->getAttributeValue("address", pUserData->strTeleporterAddress);
    pElmTeleporter->getAttributeValue("password", pUserData->strTeleporterPassword);

    if (   pUserData->strTeleporterPassword.isNotEmpty()
        && !VBoxIsPasswordHashed(&pUserData->strTeleporterPassword))
        VBoxHashPassword(&pUserData->strTeleporterPassword);
}

/**
 * Called for reading the \<Debugging\> element under \<Machine\> or \<Snapshot\>.
 */
void MachineConfigFile::readDebugging(const xml::ElementNode *pElmDebugging, Debugging *pDbg)
{
    if (!pElmDebugging || m->sv < SettingsVersion_v1_13)
        return;

    const xml::ElementNode * const pelmTracing = pElmDebugging->findChildElement("Tracing");
    if (pelmTracing)
    {
        pelmTracing->getAttributeValue("enabled", pDbg->fTracingEnabled);
        pelmTracing->getAttributeValue("allowTracingToAccessVM", pDbg->fAllowTracingToAccessVM);
        pelmTracing->getAttributeValue("config", pDbg->strTracingConfig);
    }
}

/**
 * Called for reading the \<Autostart\> element under \<Machine\> or \<Snapshot\>.
 */
void MachineConfigFile::readAutostart(const xml::ElementNode *pElmAutostart, Autostart *pAutostart)
{
    Utf8Str strAutostop;

    if (!pElmAutostart || m->sv < SettingsVersion_v1_13)
        return;

    pElmAutostart->getAttributeValue("enabled", pAutostart->fAutostartEnabled);
    pElmAutostart->getAttributeValue("delay", pAutostart->uAutostartDelay);
    pElmAutostart->getAttributeValue("autostop", strAutostop);
    if (strAutostop == "Disabled")
        pAutostart->enmAutostopType = AutostopType_Disabled;
    else if (strAutostop == "SaveState")
        pAutostart->enmAutostopType = AutostopType_SaveState;
    else if (strAutostop == "PowerOff")
        pAutostart->enmAutostopType = AutostopType_PowerOff;
    else if (strAutostop == "AcpiShutdown")
        pAutostart->enmAutostopType = AutostopType_AcpiShutdown;
    else
        throw ConfigFileError(this, pElmAutostart, N_("Invalid value '%s' for Autostart/@autostop attribute"), strAutostop.c_str());
}

/**
 * Called for reading the \<Groups\> element under \<Machine\>.
 */
void MachineConfigFile::readGroups(const xml::ElementNode *pElmGroups, StringsList *pllGroups)
{
    pllGroups->clear();
    if (!pElmGroups || m->sv < SettingsVersion_v1_13)
    {
        pllGroups->push_back("/");
        return;
    }

    xml::NodesLoop nlGroups(*pElmGroups);
    const xml::ElementNode *pelmGroup;
    while ((pelmGroup = nlGroups.forAllNodes()))
    {
        if (pelmGroup->nameEquals("Group"))
        {
            Utf8Str strGroup;
            if (!pelmGroup->getAttributeValue("name", strGroup))
                throw ConfigFileError(this, pelmGroup, N_("Required Group/@name attribute is missing"));
            pllGroups->push_back(strGroup);
        }
    }
}

/**
 * Called initially for the \<Snapshot\> element under \<Machine\>, if present,
 * to store the snapshot's data into the given Snapshot structure (which is
 * then the one in the Machine struct). This might then recurse if
 * a \<Snapshots\> (plural) element is found in the snapshot, which should
 * contain a list of child snapshots; such lists are maintained in the
 * Snapshot structure.
 *
 * @param curSnapshotUuid
 * @param depth
 * @param elmSnapshot
 * @param snap
 * @returns true if curSnapshotUuid is in this snapshot subtree, otherwise false
 */
bool MachineConfigFile::readSnapshot(const Guid &curSnapshotUuid,
                                     uint32_t depth,
                                     const xml::ElementNode &elmSnapshot,
                                     Snapshot &snap)
{
    if (depth > SETTINGS_SNAPSHOT_DEPTH_MAX)
        throw ConfigFileError(this, &elmSnapshot, N_("Maximum snapshot tree depth of %u exceeded"), SETTINGS_SNAPSHOT_DEPTH_MAX);

    Utf8Str strTemp;

    if (!elmSnapshot.getAttributeValue("uuid", strTemp))
        throw ConfigFileError(this, &elmSnapshot, N_("Required Snapshot/@uuid attribute is missing"));
    parseUUID(snap.uuid, strTemp, &elmSnapshot);
    bool foundCurrentSnapshot = (snap.uuid == curSnapshotUuid);

    if (!elmSnapshot.getAttributeValue("name", snap.strName))
        throw ConfigFileError(this, &elmSnapshot, N_("Required Snapshot/@name attribute is missing"));

    // 3.1 dev builds added Description as an attribute, read it silently
    // and write it back as an element
    elmSnapshot.getAttributeValue("Description", snap.strDescription);

    if (!elmSnapshot.getAttributeValue("timeStamp", strTemp))
        throw ConfigFileError(this, &elmSnapshot, N_("Required Snapshot/@timeStamp attribute is missing"));
    parseTimestamp(snap.timestamp, strTemp, &elmSnapshot);

    elmSnapshot.getAttributeValuePath("stateFile", snap.strStateFile);      // online snapshots only

    // parse Hardware before the other elements because other things depend on it
    const xml::ElementNode *pelmHardware;
    if (!(pelmHardware = elmSnapshot.findChildElement("Hardware")))
        throw ConfigFileError(this, &elmSnapshot, N_("Required Snapshot/@Hardware element is missing"));
    readHardware(*pelmHardware, snap.hardware);

    xml::NodesLoop nlSnapshotChildren(elmSnapshot);
    const xml::ElementNode *pelmSnapshotChild;
    while ((pelmSnapshotChild = nlSnapshotChildren.forAllNodes()))
    {
        if (pelmSnapshotChild->nameEquals("Description"))
            snap.strDescription = pelmSnapshotChild->getValue();
        else if (   m->sv < SettingsVersion_v1_7
                 && pelmSnapshotChild->nameEquals("HardDiskAttachments"))
            readHardDiskAttachments_pre1_7(*pelmSnapshotChild, snap.hardware.storage);
        else if (   m->sv >= SettingsVersion_v1_7
                 && pelmSnapshotChild->nameEquals("StorageControllers"))
            readStorageControllers(*pelmSnapshotChild, snap.hardware.storage);
        else if (pelmSnapshotChild->nameEquals("Snapshots"))
        {
            xml::NodesLoop nlChildSnapshots(*pelmSnapshotChild);
            const xml::ElementNode *pelmChildSnapshot;
            while ((pelmChildSnapshot = nlChildSnapshots.forAllNodes()))
            {
                if (pelmChildSnapshot->nameEquals("Snapshot"))
                {
                    // recurse with this element and put the child at the
                    // end of the list. XPCOM has very small stack, avoid
                    // big local variables and use the list element.
                    snap.llChildSnapshots.push_back(Snapshot::Empty);
                    bool found = readSnapshot(curSnapshotUuid, depth + 1, *pelmChildSnapshot, snap.llChildSnapshots.back());
                    foundCurrentSnapshot = foundCurrentSnapshot || found;
                }
            }
        }
    }

    if (m->sv < SettingsVersion_v1_9)
        // go through Hardware once more to repair the settings controller structures
        // with data from old DVDDrive and FloppyDrive elements
        readDVDAndFloppies_pre1_9(*pelmHardware, snap.hardware.storage);

    readDebugging(elmSnapshot.findChildElement("Debugging"), &snap.debugging);
    readAutostart(elmSnapshot.findChildElement("Autostart"), &snap.autostart);
    // note: Groups exist only for Machine, not for Snapshot

    return foundCurrentSnapshot;
}

const struct {
    const char *pcszOld;
    const char *pcszNew;
} aConvertOSTypes[] =
{
    { "unknown", "Other" },
    { "dos", "DOS" },
    { "win31", "Windows31" },
    { "win95", "Windows95" },
    { "win98", "Windows98" },
    { "winme", "WindowsMe" },
    { "winnt4", "WindowsNT4" },
    { "win2k", "Windows2000" },
    { "winxp", "WindowsXP" },
    { "win2k3", "Windows2003" },
    { "winvista", "WindowsVista" },
    { "win2k8", "Windows2008" },
    { "os2warp3", "OS2Warp3" },
    { "os2warp4", "OS2Warp4" },
    { "os2warp45", "OS2Warp45" },
    { "ecs", "OS2eCS" },
    { "linux22", "Linux22" },
    { "linux24", "Linux24" },
    { "linux26", "Linux26" },
    { "archlinux", "ArchLinux" },
    { "debian", "Debian" },
    { "opensuse", "OpenSUSE" },
    { "fedoracore", "Fedora" },
    { "gentoo", "Gentoo" },
    { "mandriva", "Mandriva" },
    { "redhat", "RedHat" },
    { "ubuntu", "Ubuntu" },
    { "xandros", "Xandros" },
    { "freebsd", "FreeBSD" },
    { "openbsd", "OpenBSD" },
    { "netbsd", "NetBSD" },
    { "netware", "Netware" },
    { "solaris", "Solaris" },
    { "opensolaris", "OpenSolaris" },
    { "l4", "L4" }
};

void MachineConfigFile::convertOldOSType_pre1_5(Utf8Str &str)
{
    for (unsigned u = 0;
         u < RT_ELEMENTS(aConvertOSTypes);
         ++u)
    {
        if (str == aConvertOSTypes[u].pcszOld)
        {
            str = aConvertOSTypes[u].pcszNew;
            break;
        }
    }
}

/**
 * Called from the constructor to actually read in the \<Machine\> element
 * of a machine config file.
 * @param elmMachine
 */
void MachineConfigFile::readMachine(const xml::ElementNode &elmMachine)
{
    Utf8Str strUUID;
    if (   elmMachine.getAttributeValue("uuid", strUUID)
        && elmMachine.getAttributeValue("name", machineUserData.strName))
    {
        parseUUID(uuid, strUUID, &elmMachine);

        elmMachine.getAttributeValue("directoryIncludesUUID", machineUserData.fDirectoryIncludesUUID);
        elmMachine.getAttributeValue("nameSync", machineUserData.fNameSync);

        Utf8Str str;
        elmMachine.getAttributeValue("Description", machineUserData.strDescription);
        elmMachine.getAttributeValue("OSType", machineUserData.strOsType);
        if (m->sv < SettingsVersion_v1_5)
            convertOldOSType_pre1_5(machineUserData.strOsType);

        elmMachine.getAttributeValuePath("stateFile", strStateFile);

        if (elmMachine.getAttributeValue("currentSnapshot", str))
            parseUUID(uuidCurrentSnapshot, str, &elmMachine);

        elmMachine.getAttributeValuePath("snapshotFolder", machineUserData.strSnapshotFolder);

        if (!elmMachine.getAttributeValue("currentStateModified", fCurrentStateModified))
            fCurrentStateModified = true;
        if (elmMachine.getAttributeValue("lastStateChange", str))
            parseTimestamp(timeLastStateChange, str, &elmMachine);
            // constructor has called RTTimeNow(&timeLastStateChange) before
        if (elmMachine.getAttributeValue("aborted", fAborted))
            fAborted = true;

        {
            Utf8Str strVMPriority;
            if (elmMachine.getAttributeValue("processPriority", strVMPriority))
            {
                if (strVMPriority == "Flat")
                    machineUserData.enmVMPriority = VMProcPriority_Flat;
                else if (strVMPriority == "Low")
                    machineUserData.enmVMPriority = VMProcPriority_Low;
                else if (strVMPriority == "Normal")
                    machineUserData.enmVMPriority = VMProcPriority_Normal;
                else if (strVMPriority == "High")
                    machineUserData.enmVMPriority = VMProcPriority_High;
                else
                    machineUserData.enmVMPriority = VMProcPriority_Default;
            }
        }

        str.setNull();
        elmMachine.getAttributeValue("icon", str);
        parseBase64(machineUserData.ovIcon, str, &elmMachine);

        // parse Hardware before the other elements because other things depend on it
        const xml::ElementNode *pelmHardware;
        if (!(pelmHardware = elmMachine.findChildElement("Hardware")))
            throw ConfigFileError(this, &elmMachine, N_("Required Machine/Hardware element is missing"));
        readHardware(*pelmHardware, hardwareMachine);

        xml::NodesLoop nlRootChildren(elmMachine);
        const xml::ElementNode *pelmMachineChild;
        while ((pelmMachineChild = nlRootChildren.forAllNodes()))
        {
            if (pelmMachineChild->nameEquals("ExtraData"))
                readExtraData(*pelmMachineChild,
                              mapExtraDataItems);
            else if (    (m->sv < SettingsVersion_v1_7)
                      && (pelmMachineChild->nameEquals("HardDiskAttachments"))
                    )
                readHardDiskAttachments_pre1_7(*pelmMachineChild, hardwareMachine.storage);
            else if (    (m->sv >= SettingsVersion_v1_7)
                      && (pelmMachineChild->nameEquals("StorageControllers"))
                    )
                readStorageControllers(*pelmMachineChild, hardwareMachine.storage);
            else if (pelmMachineChild->nameEquals("Snapshot"))
            {
                if (uuidCurrentSnapshot.isZero())
                    throw ConfigFileError(this, &elmMachine, N_("Snapshots present but required Machine/@currentSnapshot attribute is missing"));
                bool foundCurrentSnapshot = false;
                Snapshot snap;
                // this will recurse into child snapshots, if necessary
                foundCurrentSnapshot = readSnapshot(uuidCurrentSnapshot, 1, *pelmMachineChild, snap);
                if (!foundCurrentSnapshot)
                    throw ConfigFileError(this, &elmMachine, N_("Snapshots present but none matches the UUID in the Machine/@currentSnapshot attribute"));
                llFirstSnapshot.push_back(snap);
            }
            else if (pelmMachineChild->nameEquals("Description"))
                machineUserData.strDescription = pelmMachineChild->getValue();
            else if (pelmMachineChild->nameEquals("Teleporter"))
                readTeleporter(pelmMachineChild, &machineUserData);
            else if (pelmMachineChild->nameEquals("MediaRegistry"))
                readMediaRegistry(*pelmMachineChild, mediaRegistry);
            else if (pelmMachineChild->nameEquals("Debugging"))
                readDebugging(pelmMachineChild, &debugging);
            else if (pelmMachineChild->nameEquals("Autostart"))
                readAutostart(pelmMachineChild, &autostart);
            else if (pelmMachineChild->nameEquals("Groups"))
                readGroups(pelmMachineChild, &machineUserData.llGroups);
        }

        if (m->sv < SettingsVersion_v1_9)
            // go through Hardware once more to repair the settings controller structures
            // with data from old DVDDrive and FloppyDrive elements
            readDVDAndFloppies_pre1_9(*pelmHardware, hardwareMachine.storage);
    }
    else
        throw ConfigFileError(this, &elmMachine, N_("Required Machine/@uuid or @name attributes is missing"));
}

/**
 * Creates a \<Hardware\> node under elmParent and then writes out the XML
 * keys under that. Called for both the \<Machine\> node and for snapshots.
 * @param elmParent
 * @param hw
 * @param fl
 * @param pllElementsWithUuidAttributes
 */
void MachineConfigFile::buildHardwareXML(xml::ElementNode &elmParent,
                                         const Hardware &hw,
                                         uint32_t fl,
                                         std::list<xml::ElementNode*> *pllElementsWithUuidAttributes)
{
    xml::ElementNode *pelmHardware = elmParent.createChild("Hardware");

    if (   m->sv >= SettingsVersion_v1_4
        && (m->sv < SettingsVersion_v1_7 ? hw.strVersion != "1" : hw.strVersion != "2"))
        pelmHardware->setAttribute("version", hw.strVersion);

    if ((m->sv >= SettingsVersion_v1_9)
         && !hw.uuid.isZero()
         && hw.uuid.isValid()
       )
        pelmHardware->setAttribute("uuid", hw.uuid.toStringCurly());

    xml::ElementNode *pelmCPU      = pelmHardware->createChild("CPU");

    if (!hw.fHardwareVirt)
        pelmCPU->createChild("HardwareVirtEx")->setAttribute("enabled", hw.fHardwareVirt);
    if (!hw.fNestedPaging)
        pelmCPU->createChild("HardwareVirtExNestedPaging")->setAttribute("enabled", hw.fNestedPaging);
    if (!hw.fVPID)
        pelmCPU->createChild("HardwareVirtExVPID")->setAttribute("enabled", hw.fVPID);
    if (!hw.fUnrestrictedExecution)
        pelmCPU->createChild("HardwareVirtExUX")->setAttribute("enabled", hw.fUnrestrictedExecution);
    // PAE has too crazy default handling, must always save this setting.
    pelmCPU->createChild("PAE")->setAttribute("enabled", hw.fPAE);
    if (m->sv >= SettingsVersion_v1_16)
    {
        if (hw.fIBPBOnVMEntry || hw.fIBPBOnVMExit)
        {
            xml::ElementNode *pelmChild = pelmCPU->createChild("IBPBOn");
            if (hw.fIBPBOnVMExit)
                pelmChild->setAttribute("vmexit", hw.fIBPBOnVMExit);
            if (hw.fIBPBOnVMEntry)
                pelmChild->setAttribute("vmentry", hw.fIBPBOnVMEntry);
        }
        if (hw.fSpecCtrl)
            pelmCPU->createChild("SpecCtrl")->setAttribute("enabled", hw.fSpecCtrl);
        if (hw.fSpecCtrlByHost)
            pelmCPU->createChild("SpecCtrlByHost")->setAttribute("enabled", hw.fSpecCtrlByHost);
        if (!hw.fL1DFlushOnSched || hw.fL1DFlushOnVMEntry)
        {
            xml::ElementNode *pelmChild = pelmCPU->createChild("L1DFlushOn");
            if (!hw.fL1DFlushOnSched)
                pelmChild->setAttribute("scheduling", hw.fL1DFlushOnSched);
            if (hw.fL1DFlushOnVMEntry)
                pelmChild->setAttribute("vmentry", hw.fL1DFlushOnVMEntry);
        }
        if (!hw.fMDSClearOnSched || hw.fMDSClearOnVMEntry)
        {
            xml::ElementNode *pelmChild = pelmCPU->createChild("MDSClearOn");
            if (!hw.fMDSClearOnSched)
                pelmChild->setAttribute("scheduling", hw.fMDSClearOnSched);
            if (hw.fMDSClearOnVMEntry)
                pelmChild->setAttribute("vmentry", hw.fMDSClearOnVMEntry);
        }
    }
    if (m->sv >= SettingsVersion_v1_17 && hw.fNestedHWVirt)
        pelmCPU->createChild("NestedHWVirt")->setAttribute("enabled", hw.fNestedHWVirt);

    if (m->sv >= SettingsVersion_v1_18 && !hw.fVirtVmsaveVmload)
        pelmCPU->createChild("HardwareVirtExVirtVmsaveVmload")->setAttribute("enabled", hw.fVirtVmsaveVmload);

    if (m->sv >= SettingsVersion_v1_14 && hw.enmLongMode != Hardware::LongMode_Legacy)
    {
        // LongMode has too crazy default handling, must always save this setting.
        pelmCPU->createChild("LongMode")->setAttribute("enabled", hw.enmLongMode == Hardware::LongMode_Enabled);
    }

    if (hw.fTripleFaultReset)
        pelmCPU->createChild("TripleFaultReset")->setAttribute("enabled", hw.fTripleFaultReset);
    if (m->sv >= SettingsVersion_v1_14)
    {
        if (hw.fX2APIC)
            pelmCPU->createChild("X2APIC")->setAttribute("enabled", hw.fX2APIC);
        else if (!hw.fAPIC)
            pelmCPU->createChild("APIC")->setAttribute("enabled", hw.fAPIC);
    }
    if (hw.cCPUs > 1)
        pelmCPU->setAttribute("count", hw.cCPUs);
    if (hw.ulCpuExecutionCap != 100)
        pelmCPU->setAttribute("executionCap", hw.ulCpuExecutionCap);
    if (hw.uCpuIdPortabilityLevel != 0)
        pelmCPU->setAttribute("CpuIdPortabilityLevel", hw.uCpuIdPortabilityLevel);
    if (!hw.strCpuProfile.equals("host") && hw.strCpuProfile.isNotEmpty())
        pelmCPU->setAttribute("CpuProfile", hw.strCpuProfile);

    // HardwareVirtExLargePages has too crazy default handling, must always save this setting.
    pelmCPU->createChild("HardwareVirtExLargePages")->setAttribute("enabled", hw.fLargePages);

    if (m->sv >= SettingsVersion_v1_9)
    {
        if (hw.fHardwareVirtForce)
            pelmCPU->createChild("HardwareVirtForce")->setAttribute("enabled", hw.fHardwareVirtForce);
    }

    if (m->sv >= SettingsVersion_v1_9 && hw.fUseNativeApi)
        pelmCPU->createChild("HardwareVirtExUseNativeApi")->setAttribute("enabled", hw.fUseNativeApi);

    if (m->sv >= SettingsVersion_v1_10)
    {
        if (hw.fCpuHotPlug)
            pelmCPU->setAttribute("hotplug", hw.fCpuHotPlug);

        xml::ElementNode *pelmCpuTree = NULL;
        for (CpuList::const_iterator it = hw.llCpus.begin();
             it != hw.llCpus.end();
             ++it)
        {
            const Cpu &cpu = *it;

            if (pelmCpuTree == NULL)
                 pelmCpuTree = pelmCPU->createChild("CpuTree");

            xml::ElementNode *pelmCpu = pelmCpuTree->createChild("Cpu");
            pelmCpu->setAttribute("id", cpu.ulId);
        }
    }

    xml::ElementNode *pelmCpuIdTree = NULL;
    for (CpuIdLeafsList::const_iterator it = hw.llCpuIdLeafs.begin();
         it != hw.llCpuIdLeafs.end();
         ++it)
    {
        const CpuIdLeaf &leaf = *it;

        if (pelmCpuIdTree == NULL)
             pelmCpuIdTree = pelmCPU->createChild("CpuIdTree");

        xml::ElementNode *pelmCpuIdLeaf = pelmCpuIdTree->createChild("CpuIdLeaf");
        pelmCpuIdLeaf->setAttribute("id",  leaf.idx);
        if (leaf.idxSub != 0)
            pelmCpuIdLeaf->setAttribute("subleaf",  leaf.idxSub);
        pelmCpuIdLeaf->setAttribute("eax", leaf.uEax);
        pelmCpuIdLeaf->setAttribute("ebx", leaf.uEbx);
        pelmCpuIdLeaf->setAttribute("ecx", leaf.uEcx);
        pelmCpuIdLeaf->setAttribute("edx", leaf.uEdx);
    }

    xml::ElementNode *pelmMemory = pelmHardware->createChild("Memory");
    pelmMemory->setAttribute("RAMSize", hw.ulMemorySizeMB);
    if (m->sv >= SettingsVersion_v1_10)
    {
        if (hw.fPageFusionEnabled)
            pelmMemory->setAttribute("PageFusion", hw.fPageFusionEnabled);
    }

    if (    (m->sv >= SettingsVersion_v1_9)
         && (hw.firmwareType >= FirmwareType_EFI)
       )
    {
        xml::ElementNode *pelmFirmware = pelmHardware->createChild("Firmware");
        const char *pcszFirmware;

        switch (hw.firmwareType)
        {
            case FirmwareType_EFI:      pcszFirmware = "EFI";     break;
            case FirmwareType_EFI32:    pcszFirmware = "EFI32";   break;
            case FirmwareType_EFI64:    pcszFirmware = "EFI64";   break;
            case FirmwareType_EFIDUAL:  pcszFirmware = "EFIDUAL"; break;
            default:                    pcszFirmware = "None";    break;
        }
        pelmFirmware->setAttribute("type", pcszFirmware);
    }

    if (   m->sv >= SettingsVersion_v1_10
        && (   hw.pointingHIDType != PointingHIDType_PS2Mouse
            || hw.keyboardHIDType != KeyboardHIDType_PS2Keyboard))
    {
        xml::ElementNode *pelmHID = pelmHardware->createChild("HID");
        const char *pcszHID;

        if (hw.pointingHIDType != PointingHIDType_PS2Mouse)
        {
            switch (hw.pointingHIDType)
            {
                case PointingHIDType_USBMouse:      pcszHID = "USBMouse";     break;
                case PointingHIDType_USBTablet:     pcszHID = "USBTablet";    break;
                case PointingHIDType_PS2Mouse:      pcszHID = "PS2Mouse";     break;
                case PointingHIDType_ComboMouse:    pcszHID = "ComboMouse";   break;
                case PointingHIDType_USBMultiTouch: pcszHID = "USBMultiTouch";break;
                case PointingHIDType_None:          pcszHID = "None";         break;
                default:            Assert(false);  pcszHID = "PS2Mouse";     break;
            }
            pelmHID->setAttribute("Pointing", pcszHID);
        }

        if (hw.keyboardHIDType != KeyboardHIDType_PS2Keyboard)
        {
            switch (hw.keyboardHIDType)
            {
                case KeyboardHIDType_USBKeyboard:   pcszHID = "USBKeyboard";   break;
                case KeyboardHIDType_PS2Keyboard:   pcszHID = "PS2Keyboard";   break;
                case KeyboardHIDType_ComboKeyboard: pcszHID = "ComboKeyboard"; break;
                case KeyboardHIDType_None:          pcszHID = "None";          break;
                default:            Assert(false);  pcszHID = "PS2Keyboard";   break;
            }
            pelmHID->setAttribute("Keyboard", pcszHID);
        }
    }

    if (    (m->sv >= SettingsVersion_v1_10)
        &&  hw.fHPETEnabled
       )
    {
        xml::ElementNode *pelmHPET = pelmHardware->createChild("HPET");
        pelmHPET->setAttribute("enabled", hw.fHPETEnabled);
    }

    if (    (m->sv >= SettingsVersion_v1_11)
       )
    {
        if (hw.chipsetType != ChipsetType_PIIX3)
        {
            xml::ElementNode *pelmChipset = pelmHardware->createChild("Chipset");
            const char *pcszChipset;

            switch (hw.chipsetType)
            {
                case ChipsetType_PIIX3:             pcszChipset = "PIIX3";   break;
                case ChipsetType_ICH9:              pcszChipset = "ICH9";    break;
                default:            Assert(false);  pcszChipset = "PIIX3";   break;
            }
            pelmChipset->setAttribute("type", pcszChipset);
        }
    }

    if (    (m->sv >= SettingsVersion_v1_15)
        && !hw.areParavirtDefaultSettings(m->sv)
       )
    {
        const char *pcszParavirtProvider;
        switch (hw.paravirtProvider)
        {
            case ParavirtProvider_None:         pcszParavirtProvider = "None";     break;
            case ParavirtProvider_Default:      pcszParavirtProvider = "Default";  break;
            case ParavirtProvider_Legacy:       pcszParavirtProvider = "Legacy";   break;
            case ParavirtProvider_Minimal:      pcszParavirtProvider = "Minimal";  break;
            case ParavirtProvider_HyperV:       pcszParavirtProvider = "HyperV";   break;
            case ParavirtProvider_KVM:          pcszParavirtProvider = "KVM";      break;
            default:            Assert(false);  pcszParavirtProvider = "None";     break;
        }

        xml::ElementNode *pelmParavirt = pelmHardware->createChild("Paravirt");
        pelmParavirt->setAttribute("provider", pcszParavirtProvider);

        if (   m->sv >= SettingsVersion_v1_16
            && hw.strParavirtDebug.isNotEmpty())
            pelmParavirt->setAttribute("debug", hw.strParavirtDebug);
    }

    if (   m->sv >= SettingsVersion_v1_19
        && hw.iommuType != IommuType_None)
    {
        const char *pcszIommuType;
        switch (hw.iommuType)
        {
            case IommuType_None:         pcszIommuType = "None";        break;
            case IommuType_Automatic:    pcszIommuType = "Automatic";   break;
            case IommuType_AMD:          pcszIommuType = "AMD";         break;
            case IommuType_Intel:        pcszIommuType = "Intel";       break;
            default:     Assert(false);  pcszIommuType = "None";        break;
        }

        xml::ElementNode *pelmIommu = pelmHardware->createChild("Iommu");
        pelmIommu->setAttribute("type", pcszIommuType);
    }

    if (!hw.areBootOrderDefaultSettings())
    {
        xml::ElementNode *pelmBoot = pelmHardware->createChild("Boot");
        for (BootOrderMap::const_iterator it = hw.mapBootOrder.begin();
             it != hw.mapBootOrder.end();
             ++it)
        {
            uint32_t i = it->first;
            DeviceType_T type = it->second;
            const char *pcszDevice;

            switch (type)
            {
                case DeviceType_Floppy:     pcszDevice = "Floppy"; break;
                case DeviceType_DVD:        pcszDevice = "DVD"; break;
                case DeviceType_HardDisk:   pcszDevice = "HardDisk"; break;
                case DeviceType_Network:    pcszDevice = "Network"; break;
                default: /*case DeviceType_Null:*/      pcszDevice = "None"; break;
            }

            xml::ElementNode *pelmOrder = pelmBoot->createChild("Order");
            pelmOrder->setAttribute("position",
                                    i + 1);   // XML is 1-based but internal data is 0-based
            pelmOrder->setAttribute("device", pcszDevice);
        }
    }

    if (!hw.graphicsAdapter.areDefaultSettings())
    {
        xml::ElementNode *pelmDisplay = pelmHardware->createChild("Display");
        if (hw.graphicsAdapter.graphicsControllerType != GraphicsControllerType_VBoxVGA)
        {
            const char *pcszGraphics;
            switch (hw.graphicsAdapter.graphicsControllerType)
            {
                case GraphicsControllerType_VBoxVGA:            pcszGraphics = "VBoxVGA"; break;
                case GraphicsControllerType_VMSVGA:             pcszGraphics = "VMSVGA"; break;
                case GraphicsControllerType_VBoxSVGA:           pcszGraphics = "VBoxSVGA"; break;
                default: /*case GraphicsControllerType_Null:*/  pcszGraphics = "None"; break;
            }
            pelmDisplay->setAttribute("controller", pcszGraphics);
        }
        if (hw.graphicsAdapter.ulVRAMSizeMB != 8)
            pelmDisplay->setAttribute("VRAMSize", hw.graphicsAdapter.ulVRAMSizeMB);
        if (hw.graphicsAdapter.cMonitors > 1)
            pelmDisplay->setAttribute("monitorCount", hw.graphicsAdapter.cMonitors);
        if (hw.graphicsAdapter.fAccelerate3D)
            pelmDisplay->setAttribute("accelerate3D", hw.graphicsAdapter.fAccelerate3D);

        if (m->sv >= SettingsVersion_v1_8)
        {
            if (hw.graphicsAdapter.fAccelerate2DVideo)
                pelmDisplay->setAttribute("accelerate2DVideo", hw.graphicsAdapter.fAccelerate2DVideo);
        }
    }

    if (m->sv >= SettingsVersion_v1_14 && !hw.recordingSettings.areDefaultSettings())
    {
        xml::ElementNode *pelmVideoCapture = pelmHardware->createChild("VideoCapture");

        if (hw.recordingSettings.fEnabled)
            pelmVideoCapture->setAttribute("enabled", hw.recordingSettings.fEnabled);

        /* Right now I don't want to bump the settings version, so just convert the enabled
         * screens to the former uint64t_t bit array and vice versa. */
        uint64_t u64VideoCaptureScreens = 0;
        RecordingScreenMap::const_iterator itScreen = hw.recordingSettings.mapScreens.begin();
        while (itScreen != hw.recordingSettings.mapScreens.end())
        {
            if (itScreen->second.fEnabled)
               u64VideoCaptureScreens |= RT_BIT_64(itScreen->first);
            ++itScreen;
        }

        if (u64VideoCaptureScreens)
            pelmVideoCapture->setAttribute("screens",      u64VideoCaptureScreens);

        /* At the moment we only support one capturing configuration, that is, all screens
         * have the same configuration. So load/save to/from screen 0. */
        Assert(hw.recordingSettings.mapScreens.size());
        const RecordingScreenMap::const_iterator itScreen0Settings = hw.recordingSettings.mapScreens.find(0);
        Assert(itScreen0Settings != hw.recordingSettings.mapScreens.end());

        if (itScreen0Settings->second.ulMaxTimeS)
            pelmVideoCapture->setAttribute("maxTime",      itScreen0Settings->second.ulMaxTimeS);
        if (itScreen0Settings->second.strOptions.isNotEmpty())
            pelmVideoCapture->setAttributePath("options",  itScreen0Settings->second.strOptions);

        if (!itScreen0Settings->second.File.strName.isEmpty())
            pelmVideoCapture->setAttributePath("file",     itScreen0Settings->second.File.strName);
        if (itScreen0Settings->second.File.ulMaxSizeMB)
            pelmVideoCapture->setAttribute("maxSize",      itScreen0Settings->second.File.ulMaxSizeMB);

        if (   itScreen0Settings->second.Video.ulWidth  != 1024
            || itScreen0Settings->second.Video.ulHeight != 768)
        {
            pelmVideoCapture->setAttribute("horzRes",      itScreen0Settings->second.Video.ulWidth);
            pelmVideoCapture->setAttribute("vertRes",      itScreen0Settings->second.Video.ulHeight);
        }
        if (itScreen0Settings->second.Video.ulRate != 512)
            pelmVideoCapture->setAttribute("rate",         itScreen0Settings->second.Video.ulRate);
        if (itScreen0Settings->second.Video.ulFPS)
            pelmVideoCapture->setAttribute("fps",          itScreen0Settings->second.Video.ulFPS);
    }

    if (!hw.vrdeSettings.areDefaultSettings(m->sv))
    {
        xml::ElementNode *pelmVRDE = pelmHardware->createChild("RemoteDisplay");
        if (m->sv < SettingsVersion_v1_16 ? !hw.vrdeSettings.fEnabled : hw.vrdeSettings.fEnabled)
            pelmVRDE->setAttribute("enabled", hw.vrdeSettings.fEnabled);
        if (m->sv < SettingsVersion_v1_11)
        {
            /* In VBox 4.0 these attributes are replaced with "Properties". */
            Utf8Str strPort;
            StringsMap::const_iterator it = hw.vrdeSettings.mapProperties.find("TCP/Ports");
            if (it != hw.vrdeSettings.mapProperties.end())
                strPort = it->second;
            if (!strPort.length())
                strPort = "3389";
            pelmVRDE->setAttribute("port", strPort);

            Utf8Str strAddress;
            it = hw.vrdeSettings.mapProperties.find("TCP/Address");
            if (it != hw.vrdeSettings.mapProperties.end())
                strAddress = it->second;
            if (strAddress.length())
                pelmVRDE->setAttribute("netAddress", strAddress);
        }
        if (hw.vrdeSettings.authType != AuthType_Null)
        {
            const char *pcszAuthType;
            switch (hw.vrdeSettings.authType)
            {
                case AuthType_Guest:    pcszAuthType = "Guest";    break;
                case AuthType_External: pcszAuthType = "External"; break;
                default: /*case AuthType_Null:*/ pcszAuthType = "Null"; break;
            }
            pelmVRDE->setAttribute("authType", pcszAuthType);
        }

        if (hw.vrdeSettings.ulAuthTimeout != 0 && hw.vrdeSettings.ulAuthTimeout != 5000)
            pelmVRDE->setAttribute("authTimeout", hw.vrdeSettings.ulAuthTimeout);
        if (hw.vrdeSettings.fAllowMultiConnection)
            pelmVRDE->setAttribute("allowMultiConnection", hw.vrdeSettings.fAllowMultiConnection);
        if (hw.vrdeSettings.fReuseSingleConnection)
            pelmVRDE->setAttribute("reuseSingleConnection", hw.vrdeSettings.fReuseSingleConnection);

        if (m->sv == SettingsVersion_v1_10)
        {
            xml::ElementNode *pelmVideoChannel = pelmVRDE->createChild("VideoChannel");

            /* In 4.0 videochannel settings were replaced with properties, so look at properties. */
            Utf8Str str;
            StringsMap::const_iterator it = hw.vrdeSettings.mapProperties.find("VideoChannel/Enabled");
            if (it != hw.vrdeSettings.mapProperties.end())
                str = it->second;
            bool fVideoChannel =    RTStrICmp(str.c_str(), "true") == 0
                                 || RTStrCmp(str.c_str(), "1") == 0;
            pelmVideoChannel->setAttribute("enabled", fVideoChannel);

            it = hw.vrdeSettings.mapProperties.find("VideoChannel/Quality");
            if (it != hw.vrdeSettings.mapProperties.end())
                str = it->second;
            uint32_t ulVideoChannelQuality = RTStrToUInt32(str.c_str()); /* This returns 0 on invalid string which is ok. */
            if (ulVideoChannelQuality == 0)
                ulVideoChannelQuality = 75;
            else
                ulVideoChannelQuality = RT_CLAMP(ulVideoChannelQuality, 10, 100);
            pelmVideoChannel->setAttribute("quality", ulVideoChannelQuality);
        }
        if (m->sv >= SettingsVersion_v1_11)
        {
            if (hw.vrdeSettings.strAuthLibrary.length())
                pelmVRDE->setAttribute("authLibrary", hw.vrdeSettings.strAuthLibrary);
            if (hw.vrdeSettings.strVrdeExtPack.isNotEmpty())
                pelmVRDE->setAttribute("VRDEExtPack", hw.vrdeSettings.strVrdeExtPack);
            if (hw.vrdeSettings.mapProperties.size() > 0)
            {
                xml::ElementNode *pelmProperties = pelmVRDE->createChild("VRDEProperties");
                for (StringsMap::const_iterator it = hw.vrdeSettings.mapProperties.begin();
                     it != hw.vrdeSettings.mapProperties.end();
                     ++it)
                {
                    const Utf8Str &strName = it->first;
                    const Utf8Str &strValue = it->second;
                    xml::ElementNode *pelm = pelmProperties->createChild("Property");
                    pelm->setAttribute("name", strName);
                    pelm->setAttribute("value", strValue);
                }
            }
        }
    }

    if (!hw.biosSettings.areDefaultSettings())
    {
        xml::ElementNode *pelmBIOS = pelmHardware->createChild("BIOS");
        if (!hw.biosSettings.fACPIEnabled)
            pelmBIOS->createChild("ACPI")->setAttribute("enabled", hw.biosSettings.fACPIEnabled);
        if (hw.biosSettings.fIOAPICEnabled)
            pelmBIOS->createChild("IOAPIC")->setAttribute("enabled", hw.biosSettings.fIOAPICEnabled);
        if (hw.biosSettings.apicMode != APICMode_APIC)
        {
            const char *pcszAPIC;
            switch (hw.biosSettings.apicMode)
            {
                case APICMode_Disabled:
                    pcszAPIC = "Disabled";
                    break;
                case APICMode_APIC:
                default:
                    pcszAPIC = "APIC";
                    break;
                case APICMode_X2APIC:
                    pcszAPIC = "X2APIC";
                    break;
            }
            pelmBIOS->createChild("APIC")->setAttribute("mode", pcszAPIC);
        }

        if (   !hw.biosSettings.fLogoFadeIn
            || !hw.biosSettings.fLogoFadeOut
            || hw.biosSettings.ulLogoDisplayTime
            || !hw.biosSettings.strLogoImagePath.isEmpty())
        {
            xml::ElementNode *pelmLogo = pelmBIOS->createChild("Logo");
            pelmLogo->setAttribute("fadeIn", hw.biosSettings.fLogoFadeIn);
            pelmLogo->setAttribute("fadeOut", hw.biosSettings.fLogoFadeOut);
            pelmLogo->setAttribute("displayTime", hw.biosSettings.ulLogoDisplayTime);
            if (!hw.biosSettings.strLogoImagePath.isEmpty())
                pelmLogo->setAttribute("imagePath", hw.biosSettings.strLogoImagePath);
        }

        if (hw.biosSettings.biosBootMenuMode != BIOSBootMenuMode_MessageAndMenu)
        {
            const char *pcszBootMenu;
            switch (hw.biosSettings.biosBootMenuMode)
            {
                case BIOSBootMenuMode_Disabled: pcszBootMenu = "Disabled"; break;
                case BIOSBootMenuMode_MenuOnly: pcszBootMenu = "MenuOnly"; break;
                default: /*BIOSBootMenuMode_MessageAndMenu*/ pcszBootMenu = "MessageAndMenu"; break;
            }
            pelmBIOS->createChild("BootMenu")->setAttribute("mode", pcszBootMenu);
        }
        if (hw.biosSettings.llTimeOffset)
            pelmBIOS->createChild("TimeOffset")->setAttribute("value", hw.biosSettings.llTimeOffset);
        if (hw.biosSettings.fPXEDebugEnabled)
            pelmBIOS->createChild("PXEDebug")->setAttribute("enabled", hw.biosSettings.fPXEDebugEnabled);
        if (!hw.nvramSettings.strNvramPath.isEmpty())
            pelmBIOS->createChild("NVRAM")->setAttribute("path", hw.nvramSettings.strNvramPath);
        if (hw.biosSettings.fSmbiosUuidLittleEndian)
            pelmBIOS->createChild("SmbiosUuidLittleEndian")->setAttribute("enabled", hw.biosSettings.fSmbiosUuidLittleEndian);
    }

    if (!hw.tpmSettings.areDefaultSettings())
    {
        xml::ElementNode *pelmTpm = pelmHardware->createChild("TrustedPlatformModule");

        const char *pcszTpm;
        switch (hw.tpmSettings.tpmType)
        {
            default:
            case TpmType_None:
                pcszTpm = "None";
                break;
            case TpmType_v1_2:
                pcszTpm = "v1_2";
                break;
            case TpmType_v2_0:
                pcszTpm = "v2_0";
                break;
            case TpmType_Host:
                pcszTpm = "Host";
                break;
            case TpmType_Swtpm:
                pcszTpm = "Swtpm";
                break;
        }
        pelmTpm->setAttribute("type", pcszTpm);
        pelmTpm->setAttribute("location", hw.tpmSettings.strLocation);
    }

    if (m->sv < SettingsVersion_v1_9)
    {
        // settings formats before 1.9 had separate DVDDrive and FloppyDrive items under Hardware;
        // run thru the storage controllers to see if we have a DVD or floppy drives
        size_t cDVDs = 0;
        size_t cFloppies = 0;

        xml::ElementNode *pelmDVD = pelmHardware->createChild("DVDDrive");
        xml::ElementNode *pelmFloppy = pelmHardware->createChild("FloppyDrive");

        for (StorageControllersList::const_iterator it = hw.storage.llStorageControllers.begin();
             it != hw.storage.llStorageControllers.end();
             ++it)
        {
            const StorageController &sctl = *it;
            // in old settings format, the DVD drive could only have been under the IDE controller
            if (sctl.storageBus == StorageBus_IDE)
            {
                for (AttachedDevicesList::const_iterator it2 = sctl.llAttachedDevices.begin();
                     it2 != sctl.llAttachedDevices.end();
                     ++it2)
                {
                    const AttachedDevice &att = *it2;
                    if (att.deviceType == DeviceType_DVD)
                    {
                        if (cDVDs > 0)
                            throw ConfigFileError(this, NULL, N_("Internal error: cannot save more than one DVD drive with old settings format"));

                        ++cDVDs;

                        pelmDVD->setAttribute("passthrough", att.fPassThrough);
                        if (att.fTempEject)
                            pelmDVD->setAttribute("tempeject", att.fTempEject);

                        if (!att.uuid.isZero() && att.uuid.isValid())
                            pelmDVD->createChild("Image")->setAttribute("uuid", att.uuid.toStringCurly());
                        else if (att.strHostDriveSrc.length())
                            pelmDVD->createChild("HostDrive")->setAttribute("src", att.strHostDriveSrc);
                    }
                }
            }
            else if (sctl.storageBus == StorageBus_Floppy)
            {
                size_t cFloppiesHere = sctl.llAttachedDevices.size();
                if (cFloppiesHere > 1)
                    throw ConfigFileError(this, NULL, N_("Internal error: floppy controller cannot have more than one device attachment"));
                if (cFloppiesHere)
                {
                    const AttachedDevice &att = sctl.llAttachedDevices.front();
                    pelmFloppy->setAttribute("enabled", true);

                    if (!att.uuid.isZero() && att.uuid.isValid())
                        pelmFloppy->createChild("Image")->setAttribute("uuid", att.uuid.toStringCurly());
                    else if (att.strHostDriveSrc.length())
                        pelmFloppy->createChild("HostDrive")->setAttribute("src", att.strHostDriveSrc);
                }

                cFloppies += cFloppiesHere;
            }
        }

        if (cFloppies == 0)
            pelmFloppy->setAttribute("enabled", false);
        else if (cFloppies > 1)
            throw ConfigFileError(this, NULL, N_("Internal error: cannot save more than one floppy drive with old settings format"));
    }

    if (m->sv < SettingsVersion_v1_14)
    {
        bool fOhciEnabled = false;
        bool fEhciEnabled = false;
        xml::ElementNode *pelmUSB = pelmHardware->createChild("USBController");

        for (USBControllerList::const_iterator it = hw.usbSettings.llUSBControllers.begin();
             it != hw.usbSettings.llUSBControllers.end();
             ++it)
        {
            const USBController &ctrl = *it;

            switch (ctrl.enmType)
            {
                case USBControllerType_OHCI:
                    fOhciEnabled = true;
                    break;
                case USBControllerType_EHCI:
                    fEhciEnabled = true;
                    break;
                default:
                    AssertMsgFailed(("Unknown USB controller type %d\n", ctrl.enmType));
            }
        }

        pelmUSB->setAttribute("enabled", fOhciEnabled);
        pelmUSB->setAttribute("enabledEhci", fEhciEnabled);

        buildUSBDeviceFilters(*pelmUSB, hw.usbSettings.llDeviceFilters, false /* fHostMode */);
    }
    else
    {
        if (   hw.usbSettings.llUSBControllers.size()
            || hw.usbSettings.llDeviceFilters.size())
        {
            xml::ElementNode *pelmUSB = pelmHardware->createChild("USB");
            if (hw.usbSettings.llUSBControllers.size())
            {
                xml::ElementNode *pelmCtrls = pelmUSB->createChild("Controllers");

                for (USBControllerList::const_iterator it = hw.usbSettings.llUSBControllers.begin();
                     it != hw.usbSettings.llUSBControllers.end();
                     ++it)
                {
                    const USBController &ctrl = *it;
                    com::Utf8Str strType;
                    xml::ElementNode *pelmCtrl = pelmCtrls->createChild("Controller");

                    switch (ctrl.enmType)
                    {
                        case USBControllerType_OHCI:
                            strType = "OHCI";
                            break;
                        case USBControllerType_EHCI:
                            strType = "EHCI";
                            break;
                        case USBControllerType_XHCI:
                            strType = "XHCI";
                            break;
                        default:
                            AssertMsgFailed(("Unknown USB controller type %d\n", ctrl.enmType));
                    }

                    pelmCtrl->setAttribute("name", ctrl.strName);
                    pelmCtrl->setAttribute("type", strType);
                }
            }

            if (hw.usbSettings.llDeviceFilters.size())
            {
                xml::ElementNode *pelmFilters = pelmUSB->createChild("DeviceFilters");
                buildUSBDeviceFilters(*pelmFilters, hw.usbSettings.llDeviceFilters, false /* fHostMode */);
            }
        }
    }

    if (   hw.llNetworkAdapters.size()
        && !hw.areAllNetworkAdaptersDefaultSettings(m->sv))
    {
        xml::ElementNode *pelmNetwork = pelmHardware->createChild("Network");
        for (NetworkAdaptersList::const_iterator it = hw.llNetworkAdapters.begin();
             it != hw.llNetworkAdapters.end();
             ++it)
        {
            const NetworkAdapter &nic = *it;

            if (!nic.areDefaultSettings(m->sv))
            {
                xml::ElementNode *pelmAdapter = pelmNetwork->createChild("Adapter");
                pelmAdapter->setAttribute("slot", nic.ulSlot);
                if (nic.fEnabled)
                    pelmAdapter->setAttribute("enabled", nic.fEnabled);
                if (!nic.strMACAddress.isEmpty())
                    pelmAdapter->setAttribute("MACAddress", nic.strMACAddress);
                if (   (m->sv >= SettingsVersion_v1_16 && !nic.fCableConnected)
                    || (m->sv < SettingsVersion_v1_16 && nic.fCableConnected))
                    pelmAdapter->setAttribute("cable", nic.fCableConnected);
                if (nic.ulLineSpeed)
                    pelmAdapter->setAttribute("speed", nic.ulLineSpeed);
                if (nic.ulBootPriority != 0)
                    pelmAdapter->setAttribute("bootPriority", nic.ulBootPriority);
                if (nic.fTraceEnabled)
                {
                    pelmAdapter->setAttribute("trace", nic.fTraceEnabled);
                    pelmAdapter->setAttribute("tracefile", nic.strTraceFile);
                }
                if (nic.strBandwidthGroup.isNotEmpty())
                    pelmAdapter->setAttribute("bandwidthGroup", nic.strBandwidthGroup);

                const char *pszPolicy;
                switch (nic.enmPromiscModePolicy)
                {
                    case NetworkAdapterPromiscModePolicy_Deny:          pszPolicy = NULL; break;
                    case NetworkAdapterPromiscModePolicy_AllowNetwork:  pszPolicy = "AllowNetwork"; break;
                    case NetworkAdapterPromiscModePolicy_AllowAll:      pszPolicy = "AllowAll"; break;
                    default:                                            pszPolicy = NULL; AssertFailed(); break;
                }
                if (pszPolicy)
                    pelmAdapter->setAttribute("promiscuousModePolicy", pszPolicy);

                if (   (m->sv >= SettingsVersion_v1_16 && nic.type != NetworkAdapterType_Am79C973)
                    || (m->sv < SettingsVersion_v1_16 && nic.type != NetworkAdapterType_Am79C970A))
                {
                    const char *pcszType;
                    switch (nic.type)
                    {
                        case NetworkAdapterType_Am79C973:   pcszType = "Am79C973"; break;
                        case NetworkAdapterType_Am79C960:   pcszType = "Am79C960"; break;
                        case NetworkAdapterType_I82540EM:   pcszType = "82540EM"; break;
                        case NetworkAdapterType_I82543GC:   pcszType = "82543GC"; break;
                        case NetworkAdapterType_I82545EM:   pcszType = "82545EM"; break;
                        case NetworkAdapterType_Virtio:     pcszType = "virtio"; break;
                        case NetworkAdapterType_NE1000:     pcszType = "NE1000"; break;
                        case NetworkAdapterType_NE2000:     pcszType = "NE2000"; break;
                        case NetworkAdapterType_WD8003:     pcszType = "WD8003"; break;
                        case NetworkAdapterType_WD8013:     pcszType = "WD8013"; break;
                        case NetworkAdapterType_ELNK2:      pcszType = "3C503"; break;
                        case NetworkAdapterType_ELNK1:      pcszType = "3C501"; break;
                        default: /*case NetworkAdapterType_Am79C970A:*/  pcszType = "Am79C970A"; break;
                    }
                    pelmAdapter->setAttribute("type", pcszType);
                }

                xml::ElementNode *pelmNAT;
                if (m->sv < SettingsVersion_v1_10)
                {
                    switch (nic.mode)
                    {
                        case NetworkAttachmentType_NAT:
                            pelmNAT = pelmAdapter->createChild("NAT");
                            if (nic.nat.strNetwork.length())
                                pelmNAT->setAttribute("network", nic.nat.strNetwork);
                            break;

                        case NetworkAttachmentType_Bridged:
                            pelmAdapter->createChild("BridgedInterface")->setAttribute("name", nic.strBridgedName);
                            break;

                        case NetworkAttachmentType_Internal:
                            pelmAdapter->createChild("InternalNetwork")->setAttribute("name", nic.strInternalNetworkName);
                            break;

                        case NetworkAttachmentType_HostOnly:
                            pelmAdapter->createChild("HostOnlyInterface")->setAttribute("name", nic.strHostOnlyName);
                            break;

                        default: /*case NetworkAttachmentType_Null:*/
                            break;
                    }
                }
                else
                {
                    /* m->sv >= SettingsVersion_v1_10 */
                    if (!nic.areDisabledDefaultSettings(m->sv))
                    {
                        xml::ElementNode *pelmDisabledNode = pelmAdapter->createChild("DisabledModes");
                        if (nic.mode != NetworkAttachmentType_NAT)
                            buildNetworkXML(NetworkAttachmentType_NAT, false, *pelmDisabledNode, nic);
                        if (nic.mode != NetworkAttachmentType_Bridged)
                            buildNetworkXML(NetworkAttachmentType_Bridged, false, *pelmDisabledNode, nic);
                        if (nic.mode != NetworkAttachmentType_Internal)
                            buildNetworkXML(NetworkAttachmentType_Internal, false, *pelmDisabledNode, nic);
                        if (nic.mode != NetworkAttachmentType_HostOnly)
                            buildNetworkXML(NetworkAttachmentType_HostOnly, false, *pelmDisabledNode, nic);
                        if (nic.mode != NetworkAttachmentType_Generic)
                            buildNetworkXML(NetworkAttachmentType_Generic, false, *pelmDisabledNode, nic);
                        if (nic.mode != NetworkAttachmentType_NATNetwork)
                            buildNetworkXML(NetworkAttachmentType_NATNetwork, false, *pelmDisabledNode, nic);
#ifdef VBOX_WITH_CLOUD_NET
                        /// @todo Bump settings version!
                        if (nic.mode != NetworkAttachmentType_Cloud)
                            buildNetworkXML(NetworkAttachmentType_Cloud, false, *pelmDisabledNode, nic);
#endif /* VBOX_WITH_CLOUD_NET */
#ifdef VBOX_WITH_VMNET
                        if (nic.mode != NetworkAttachmentType_HostOnlyNetwork)
                            buildNetworkXML(NetworkAttachmentType_HostOnlyNetwork, false, *pelmDisabledNode, nic);
#endif /* VBOX_WITH_VMNET */
                    }
                    buildNetworkXML(nic.mode, true, *pelmAdapter, nic);
                }
            }
        }
    }

    if (hw.llSerialPorts.size())
    {
        xml::ElementNode *pelmPorts = pelmHardware->createChild("UART");
        for (SerialPortsList::const_iterator it = hw.llSerialPorts.begin();
             it != hw.llSerialPorts.end();
             ++it)
        {
            const SerialPort &port = *it;
            xml::ElementNode *pelmPort = pelmPorts->createChild("Port");
            pelmPort->setAttribute("slot", port.ulSlot);
            pelmPort->setAttribute("enabled", port.fEnabled);
            pelmPort->setAttributeHex("IOBase", port.ulIOBase);
            pelmPort->setAttribute("IRQ", port.ulIRQ);

            const char *pcszHostMode;
            switch (port.portMode)
            {
                case PortMode_HostPipe: pcszHostMode = "HostPipe"; break;
                case PortMode_HostDevice: pcszHostMode = "HostDevice"; break;
                case PortMode_TCP: pcszHostMode = "TCP"; break;
                case PortMode_RawFile: pcszHostMode = "RawFile"; break;
                default: /*case PortMode_Disconnected:*/ pcszHostMode = "Disconnected"; break;
            }
            switch (port.portMode)
            {
                case PortMode_TCP:
                case PortMode_HostPipe:
                    pelmPort->setAttribute("server", port.fServer);
                    RT_FALL_THRU();
                case PortMode_HostDevice:
                case PortMode_RawFile:
                    pelmPort->setAttribute("path", port.strPath);
                    break;

                default:
                    break;
            }
            pelmPort->setAttribute("hostMode", pcszHostMode);

            if (   m->sv >= SettingsVersion_v1_17
                && port.uartType != UartType_U16550A)
            {
                const char *pcszUartType;

                switch (port.uartType)
                {
                    case UartType_U16450: pcszUartType = "16450"; break;
                    case UartType_U16550A: pcszUartType = "16550A"; break;
                    case UartType_U16750: pcszUartType = "16750"; break;
                    default: pcszUartType = "16550A"; break;
                }
                pelmPort->setAttribute("uartType", pcszUartType);
            }
        }
    }

    if (hw.llParallelPorts.size())
    {
        xml::ElementNode *pelmPorts = pelmHardware->createChild("LPT");
        for (ParallelPortsList::const_iterator it = hw.llParallelPorts.begin();
             it != hw.llParallelPorts.end();
             ++it)
        {
            const ParallelPort &port = *it;
            xml::ElementNode *pelmPort = pelmPorts->createChild("Port");
            pelmPort->setAttribute("slot", port.ulSlot);
            pelmPort->setAttribute("enabled", port.fEnabled);
            pelmPort->setAttributeHex("IOBase", port.ulIOBase);
            pelmPort->setAttribute("IRQ", port.ulIRQ);
            if (port.strPath.length())
                pelmPort->setAttribute("path", port.strPath);
        }
    }

    /* Always write the AudioAdapter config, intentionally not checking if
     * the settings are at the default, because that would be problematic
     * for the configured host driver type, which would automatically change
     * if the default host driver is detected differently. */
    {
        xml::ElementNode *pelmAudio = pelmHardware->createChild("AudioAdapter");

        const char *pcszController;
        switch (hw.audioAdapter.controllerType)
        {
            case AudioControllerType_SB16:
                pcszController = "SB16";
                break;
            case AudioControllerType_HDA:
                if (m->sv >= SettingsVersion_v1_11)
                {
                    pcszController = "HDA";
                    break;
                }
                RT_FALL_THRU();
            case AudioControllerType_AC97:
            default:
                pcszController = NULL;
                break;
        }
        if (pcszController)
            pelmAudio->setAttribute("controller", pcszController);

        const char *pcszCodec;
        switch (hw.audioAdapter.codecType)
        {
            /* Only write out the setting for non-default AC'97 codec
             * and leave the rest alone.
             */
#if 0
            case AudioCodecType_SB16:
                pcszCodec = "SB16";
                break;
            case AudioCodecType_STAC9221:
                pcszCodec = "STAC9221";
                break;
            case AudioCodecType_STAC9700:
                pcszCodec = "STAC9700";
                break;
#endif
            case AudioCodecType_AD1980:
                pcszCodec = "AD1980";
                break;
            default:
                /* Don't write out anything if unknown. */
                pcszCodec = NULL;
        }
        if (pcszCodec)
            pelmAudio->setAttribute("codec", pcszCodec);

        const char *pcszDriver;
        switch (hw.audioAdapter.driverType)
        {
            case AudioDriverType_WinMM: pcszDriver = "WinMM"; break;
            case AudioDriverType_DirectSound: pcszDriver = "DirectSound"; break;
            case AudioDriverType_SolAudio: pcszDriver = "SolAudio"; break;
            case AudioDriverType_ALSA: pcszDriver = "ALSA"; break;
            case AudioDriverType_Pulse: pcszDriver = "Pulse"; break;
            case AudioDriverType_OSS: pcszDriver = "OSS"; break;
            case AudioDriverType_CoreAudio: pcszDriver = "CoreAudio"; break;
            case AudioDriverType_MMPM: pcszDriver = "MMPM"; break;
            default: /*case AudioDriverType_Null:*/ pcszDriver = "Null"; break;
        }
        /* Deliberately have the audio driver explicitly in the config file,
         * otherwise an unwritten default driver triggers auto-detection. */
        pelmAudio->setAttribute("driver", pcszDriver);

        if (hw.audioAdapter.fEnabled || m->sv < SettingsVersion_v1_16)
            pelmAudio->setAttribute("enabled", hw.audioAdapter.fEnabled);

        if (   (m->sv <= SettingsVersion_v1_16 && !hw.audioAdapter.fEnabledIn)
            || (m->sv > SettingsVersion_v1_16 && hw.audioAdapter.fEnabledIn))
            pelmAudio->setAttribute("enabledIn", hw.audioAdapter.fEnabledIn);

        if (   (m->sv <= SettingsVersion_v1_16 && !hw.audioAdapter.fEnabledOut)
            || (m->sv > SettingsVersion_v1_16 && hw.audioAdapter.fEnabledOut))
            pelmAudio->setAttribute("enabledOut", hw.audioAdapter.fEnabledOut);

        if (m->sv >= SettingsVersion_v1_15 && hw.audioAdapter.properties.size() > 0)
        {
            for (StringsMap::const_iterator it = hw.audioAdapter.properties.begin();
                 it != hw.audioAdapter.properties.end();
                 ++it)
            {
                const Utf8Str &strName = it->first;
                const Utf8Str &strValue = it->second;
                xml::ElementNode *pelm = pelmAudio->createChild("Property");
                pelm->setAttribute("name", strName);
                pelm->setAttribute("value", strValue);
            }
        }
    }

    if (m->sv >= SettingsVersion_v1_10 && machineUserData.fRTCUseUTC)
    {
        xml::ElementNode *pelmRTC = pelmHardware->createChild("RTC");
        pelmRTC->setAttribute("localOrUTC", machineUserData.fRTCUseUTC ? "UTC" : "local");
    }

    if (hw.llSharedFolders.size())
    {
        xml::ElementNode *pelmSharedFolders = pelmHardware->createChild("SharedFolders");
        for (SharedFoldersList::const_iterator it = hw.llSharedFolders.begin();
             it != hw.llSharedFolders.end();
             ++it)
        {
            const SharedFolder &sf = *it;
            xml::ElementNode *pelmThis = pelmSharedFolders->createChild("SharedFolder");
            pelmThis->setAttribute("name", sf.strName);
            pelmThis->setAttribute("hostPath", sf.strHostPath);
            pelmThis->setAttribute("writable", sf.fWritable);
            pelmThis->setAttribute("autoMount", sf.fAutoMount);
            if (sf.strAutoMountPoint.isNotEmpty())
                pelmThis->setAttribute("autoMountPoint", sf.strAutoMountPoint);
        }
    }

    xml::ElementNode *pelmClip = pelmHardware->createChild("Clipboard");
    if (pelmClip)
    {
        if (hw.clipboardMode != ClipboardMode_Disabled)
        {
            const char *pcszClip;
            switch (hw.clipboardMode)
            {
                default: /*case ClipboardMode_Disabled:*/ pcszClip = "Disabled"; break;
                case ClipboardMode_HostToGuest: pcszClip = "HostToGuest"; break;
                case ClipboardMode_GuestToHost: pcszClip = "GuestToHost"; break;
                case ClipboardMode_Bidirectional: pcszClip = "Bidirectional"; break;
            }
            pelmClip->setAttribute("mode", pcszClip);
        }

        if (hw.fClipboardFileTransfersEnabled)
            pelmClip->setAttribute("fileTransfersEnabled", hw.fClipboardFileTransfersEnabled);
    }

    if (hw.dndMode != DnDMode_Disabled)
    {
        xml::ElementNode *pelmDragAndDrop = pelmHardware->createChild("DragAndDrop");
        const char *pcszDragAndDrop;
        switch (hw.dndMode)
        {
            default: /*case DnDMode_Disabled:*/ pcszDragAndDrop = "Disabled"; break;
            case DnDMode_HostToGuest: pcszDragAndDrop = "HostToGuest"; break;
            case DnDMode_GuestToHost: pcszDragAndDrop = "GuestToHost"; break;
            case DnDMode_Bidirectional: pcszDragAndDrop = "Bidirectional"; break;
        }
        pelmDragAndDrop->setAttribute("mode", pcszDragAndDrop);
    }

    if (   m->sv >= SettingsVersion_v1_10
        && !hw.ioSettings.areDefaultSettings())
    {
        xml::ElementNode *pelmIO = pelmHardware->createChild("IO");
        xml::ElementNode *pelmIOCache;

        if (!hw.ioSettings.areDefaultSettings())
        {
            pelmIOCache = pelmIO->createChild("IoCache");
            if (!hw.ioSettings.fIOCacheEnabled)
                pelmIOCache->setAttribute("enabled", hw.ioSettings.fIOCacheEnabled);
            if (hw.ioSettings.ulIOCacheSize != 5)
                pelmIOCache->setAttribute("size", hw.ioSettings.ulIOCacheSize);
        }

        if (   m->sv >= SettingsVersion_v1_11
            && hw.ioSettings.llBandwidthGroups.size())
        {
            xml::ElementNode *pelmBandwidthGroups = pelmIO->createChild("BandwidthGroups");
            for (BandwidthGroupList::const_iterator it = hw.ioSettings.llBandwidthGroups.begin();
                 it != hw.ioSettings.llBandwidthGroups.end();
                 ++it)
            {
                const BandwidthGroup &gr = *it;
                const char *pcszType;
                xml::ElementNode *pelmThis = pelmBandwidthGroups->createChild("BandwidthGroup");
                pelmThis->setAttribute("name", gr.strName);
                switch (gr.enmType)
                {
                    case BandwidthGroupType_Network: pcszType = "Network"; break;
                    default: /* BandwidthGrouptype_Disk */ pcszType = "Disk"; break;
                }
                pelmThis->setAttribute("type", pcszType);
                if (m->sv >= SettingsVersion_v1_13)
                    pelmThis->setAttribute("maxBytesPerSec", gr.cMaxBytesPerSec);
                else
                    pelmThis->setAttribute("maxMbPerSec", gr.cMaxBytesPerSec / _1M);
            }
        }
    }

    if (   m->sv >= SettingsVersion_v1_12
        && hw.pciAttachments.size())
    {
        xml::ElementNode *pelmPCI = pelmHardware->createChild("HostPci");
        xml::ElementNode *pelmPCIDevices = pelmPCI->createChild("Devices");

        for (HostPCIDeviceAttachmentList::const_iterator it = hw.pciAttachments.begin();
             it != hw.pciAttachments.end();
             ++it)
        {
            const HostPCIDeviceAttachment &hpda = *it;

            xml::ElementNode *pelmThis = pelmPCIDevices->createChild("Device");

            pelmThis->setAttribute("host",  hpda.uHostAddress);
            pelmThis->setAttribute("guest", hpda.uGuestAddress);
            pelmThis->setAttribute("name",  hpda.strDeviceName);
        }
    }

    if (   m->sv >= SettingsVersion_v1_12
        && hw.fEmulatedUSBCardReader)
    {
        xml::ElementNode *pelmEmulatedUSB = pelmHardware->createChild("EmulatedUSB");

        xml::ElementNode *pelmCardReader = pelmEmulatedUSB->createChild("CardReader");
        pelmCardReader->setAttribute("enabled", hw.fEmulatedUSBCardReader);
    }

    if (   m->sv >= SettingsVersion_v1_14
        && !hw.strDefaultFrontend.isEmpty())
    {
        xml::ElementNode *pelmFrontend = pelmHardware->createChild("Frontend");
        xml::ElementNode *pelmDefault = pelmFrontend->createChild("Default");
        pelmDefault->setAttribute("type", hw.strDefaultFrontend);
    }

    if (hw.ulMemoryBalloonSize)
    {
        xml::ElementNode *pelmGuest = pelmHardware->createChild("Guest");
        pelmGuest->setAttribute("memoryBalloonSize", hw.ulMemoryBalloonSize);
    }

    if (hw.llGuestProperties.size())
    {
        xml::ElementNode *pelmGuestProps = pelmHardware->createChild("GuestProperties");
        for (GuestPropertiesList::const_iterator it = hw.llGuestProperties.begin();
             it != hw.llGuestProperties.end();
             ++it)
        {
            const GuestProperty &prop = *it;
            xml::ElementNode *pelmProp = pelmGuestProps->createChild("GuestProperty");
            pelmProp->setAttribute("name", prop.strName);
            pelmProp->setAttribute("value", prop.strValue);
            pelmProp->setAttribute("timestamp", prop.timestamp);
            pelmProp->setAttribute("flags", prop.strFlags);
        }
    }

    /* Starting with settings version of 6.0 (and only 6.1 and later does this, while
     * 5.2 and 6.0 understand it), place storage controller settings under hardware,
     * where it always should've been. */
    xml::ElementNode &elmStorageParent = (m->sv >= SettingsVersion_v1_17) ? *pelmHardware : elmParent;
    buildStorageControllersXML(elmStorageParent,
                               hw.storage,
                               !!(fl & BuildMachineXML_SkipRemovableMedia),
                               pllElementsWithUuidAttributes);
}

/**
 * Fill a \<Network\> node. Only relevant for XML version >= v1_10.
 * @param mode
 * @param fEnabled
 * @param elmParent
 * @param nic
 */
void MachineConfigFile::buildNetworkXML(NetworkAttachmentType_T mode,
                                        bool fEnabled,
                                        xml::ElementNode &elmParent,
                                        const NetworkAdapter &nic)
{
    switch (mode)
    {
        case NetworkAttachmentType_NAT:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.nat.areDefaultSettings(m->sv))
            {
                xml::ElementNode *pelmNAT = elmParent.createChild("NAT");

                if (!nic.nat.areDefaultSettings(m->sv))
                {
                    if (nic.nat.strNetwork.length())
                        pelmNAT->setAttribute("network", nic.nat.strNetwork);
                    if (nic.nat.strBindIP.length())
                        pelmNAT->setAttribute("hostip", nic.nat.strBindIP);
                    if (nic.nat.u32Mtu)
                        pelmNAT->setAttribute("mtu", nic.nat.u32Mtu);
                    if (nic.nat.u32SockRcv)
                        pelmNAT->setAttribute("sockrcv", nic.nat.u32SockRcv);
                    if (nic.nat.u32SockSnd)
                        pelmNAT->setAttribute("socksnd", nic.nat.u32SockSnd);
                    if (nic.nat.u32TcpRcv)
                        pelmNAT->setAttribute("tcprcv", nic.nat.u32TcpRcv);
                    if (nic.nat.u32TcpSnd)
                        pelmNAT->setAttribute("tcpsnd", nic.nat.u32TcpSnd);
                    if (!nic.nat.areLocalhostReachableDefaultSettings(m->sv))
                        pelmNAT->setAttribute("localhost-reachable", nic.nat.fLocalhostReachable);
                    if (!nic.nat.areDNSDefaultSettings())
                    {
                        xml::ElementNode *pelmDNS = pelmNAT->createChild("DNS");
                        if (!nic.nat.fDNSPassDomain)
                            pelmDNS->setAttribute("pass-domain", nic.nat.fDNSPassDomain);
                        if (nic.nat.fDNSProxy)
                            pelmDNS->setAttribute("use-proxy", nic.nat.fDNSProxy);
                        if (nic.nat.fDNSUseHostResolver)
                            pelmDNS->setAttribute("use-host-resolver", nic.nat.fDNSUseHostResolver);
                    }

                    if (!nic.nat.areAliasDefaultSettings())
                    {
                        xml::ElementNode *pelmAlias = pelmNAT->createChild("Alias");
                        if (nic.nat.fAliasLog)
                            pelmAlias->setAttribute("logging", nic.nat.fAliasLog);
                        if (nic.nat.fAliasProxyOnly)
                            pelmAlias->setAttribute("proxy-only", nic.nat.fAliasProxyOnly);
                        if (nic.nat.fAliasUseSamePorts)
                            pelmAlias->setAttribute("use-same-ports", nic.nat.fAliasUseSamePorts);
                    }

                    if (!nic.nat.areTFTPDefaultSettings())
                    {
                        xml::ElementNode *pelmTFTP;
                        pelmTFTP = pelmNAT->createChild("TFTP");
                        if (nic.nat.strTFTPPrefix.length())
                            pelmTFTP->setAttribute("prefix", nic.nat.strTFTPPrefix);
                        if (nic.nat.strTFTPBootFile.length())
                            pelmTFTP->setAttribute("boot-file", nic.nat.strTFTPBootFile);
                        if (nic.nat.strTFTPNextServer.length())
                            pelmTFTP->setAttribute("next-server", nic.nat.strTFTPNextServer);
                    }
                    buildNATForwardRulesMap(*pelmNAT, nic.nat.mapRules);
                }
            }
            break;

        case NetworkAttachmentType_Bridged:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strBridgedName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("BridgedInterface");
                if (!nic.strBridgedName.isEmpty())
                    pelmMode->setAttribute("name", nic.strBridgedName);
            }
            break;

        case NetworkAttachmentType_Internal:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strInternalNetworkName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("InternalNetwork");
                if (!nic.strInternalNetworkName.isEmpty())
                    pelmMode->setAttribute("name", nic.strInternalNetworkName);
            }
            break;

        case NetworkAttachmentType_HostOnly:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strHostOnlyName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("HostOnlyInterface");
                if (!nic.strHostOnlyName.isEmpty())
                    pelmMode->setAttribute("name", nic.strHostOnlyName);
            }
            break;

#ifdef VBOX_WITH_VMNET
        case NetworkAttachmentType_HostOnlyNetwork:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strHostOnlyNetworkName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("HostOnlyNetwork");
                if (!nic.strHostOnlyNetworkName.isEmpty())
                    pelmMode->setAttribute("name", nic.strHostOnlyNetworkName);
            }
            break;
#endif /* VBOX_WITH_VMNET */

        case NetworkAttachmentType_Generic:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.areGenericDriverDefaultSettings())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("GenericInterface");
                if (!nic.areGenericDriverDefaultSettings())
                {
                    pelmMode->setAttribute("driver", nic.strGenericDriver);
                    for (StringsMap::const_iterator it = nic.genericProperties.begin();
                         it != nic.genericProperties.end();
                         ++it)
                    {
                        xml::ElementNode *pelmProp = pelmMode->createChild("Property");
                        pelmProp->setAttribute("name", it->first);
                        pelmProp->setAttribute("value", it->second);
                    }
                }
            }
            break;

        case NetworkAttachmentType_NATNetwork:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strNATNetworkName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("NATNetwork");
                if (!nic.strNATNetworkName.isEmpty())
                    pelmMode->setAttribute("name", nic.strNATNetworkName);
            }
            break;

#ifdef VBOX_WITH_CLOUD_NET
        case NetworkAttachmentType_Cloud:
            // For the currently active network attachment type we have to
            // generate the tag, otherwise the attachment type is lost.
            if (fEnabled || !nic.strCloudNetworkName.isEmpty())
            {
                xml::ElementNode *pelmMode = elmParent.createChild("CloudNetwork");
                if (!nic.strCloudNetworkName.isEmpty())
                    pelmMode->setAttribute("name", nic.strCloudNetworkName);
            }
            break;
#endif /* VBOX_WITH_CLOUD_NET */

        default: /*case NetworkAttachmentType_Null:*/
            break;
    }
}

/**
 * Creates a \<StorageControllers\> node under elmParent and then writes out the XML
 * keys under that. Called for both the \<Machine\> node and for snapshots.
 * @param elmParent
 * @param st
 * @param fSkipRemovableMedia If true, DVD and floppy attachments are skipped and
 *   an empty drive is always written instead. This is for the OVF export case.
 *   This parameter is ignored unless the settings version is at least v1.9, which
 *   is always the case when this gets called for OVF export.
 * @param pllElementsWithUuidAttributes If not NULL, must point to a list of element node
 *   pointers to which we will append all elements that we created here that contain
 *   UUID attributes. This allows the OVF export code to quickly replace the internal
 *   media UUIDs with the UUIDs of the media that were exported.
 */
void MachineConfigFile::buildStorageControllersXML(xml::ElementNode &elmParent,
                                                   const Storage &st,
                                                   bool fSkipRemovableMedia,
                                                   std::list<xml::ElementNode*> *pllElementsWithUuidAttributes)
{
    if (!st.llStorageControllers.size())
        return;
    xml::ElementNode *pelmStorageControllers = elmParent.createChild("StorageControllers");

    for (StorageControllersList::const_iterator it = st.llStorageControllers.begin();
         it != st.llStorageControllers.end();
         ++it)
    {
        const StorageController &sc = *it;

        if (    (m->sv < SettingsVersion_v1_9)
             && (sc.controllerType == StorageControllerType_I82078)
           )
            // floppy controller already got written into <Hardware>/<FloppyController> in buildHardwareXML()
            // for pre-1.9 settings
            continue;

        xml::ElementNode *pelmController = pelmStorageControllers->createChild("StorageController");
        com::Utf8Str name = sc.strName;
        if (m->sv < SettingsVersion_v1_8)
        {
            // pre-1.8 settings use shorter controller names, they are
            // expanded when reading the settings
            if (name == "IDE Controller")
                name = "IDE";
            else if (name == "SATA Controller")
                name = "SATA";
            else if (name == "SCSI Controller")
                name = "SCSI";
        }
        pelmController->setAttribute("name", sc.strName);

        const char *pcszType;
        switch (sc.controllerType)
        {
            case StorageControllerType_IntelAhci: pcszType = "AHCI"; break;
            case StorageControllerType_LsiLogic: pcszType = "LsiLogic"; break;
            case StorageControllerType_BusLogic: pcszType = "BusLogic"; break;
            case StorageControllerType_PIIX4: pcszType = "PIIX4"; break;
            case StorageControllerType_ICH6: pcszType = "ICH6"; break;
            case StorageControllerType_I82078: pcszType = "I82078"; break;
            case StorageControllerType_LsiLogicSas: pcszType = "LsiLogicSas"; break;
            case StorageControllerType_USB: pcszType = "USB"; break;
            case StorageControllerType_NVMe: pcszType = "NVMe"; break;
            case StorageControllerType_VirtioSCSI: pcszType = "VirtioSCSI"; break;
            default: /*case StorageControllerType_PIIX3:*/ pcszType = "PIIX3"; break;
        }
        pelmController->setAttribute("type", pcszType);

        pelmController->setAttribute("PortCount", sc.ulPortCount);

        if (m->sv >= SettingsVersion_v1_9)
            if (sc.ulInstance)
                pelmController->setAttribute("Instance", sc.ulInstance);

        if (m->sv >= SettingsVersion_v1_10)
            pelmController->setAttribute("useHostIOCache", sc.fUseHostIOCache);

        if (m->sv >= SettingsVersion_v1_11)
            pelmController->setAttribute("Bootable", sc.fBootable);

        if (sc.controllerType == StorageControllerType_IntelAhci)
        {
            pelmController->setAttribute("IDE0MasterEmulationPort", 0);
            pelmController->setAttribute("IDE0SlaveEmulationPort", 1);
            pelmController->setAttribute("IDE1MasterEmulationPort", 2);
            pelmController->setAttribute("IDE1SlaveEmulationPort", 3);
        }

        for (AttachedDevicesList::const_iterator it2 = sc.llAttachedDevices.begin();
             it2 != sc.llAttachedDevices.end();
             ++it2)
        {
            const AttachedDevice &att = *it2;

            // For settings version before 1.9, DVDs and floppies are in hardware, not storage controllers,
            // so we shouldn't write them here; we only get here for DVDs though because we ruled out
            // the floppy controller at the top of the loop
            if (    att.deviceType == DeviceType_DVD
                 && m->sv < SettingsVersion_v1_9
               )
                continue;

            xml::ElementNode *pelmDevice = pelmController->createChild("AttachedDevice");

            pcszType = NULL;

            switch (att.deviceType)
            {
                case DeviceType_HardDisk:
                    pcszType = "HardDisk";
                    if (att.fNonRotational)
                        pelmDevice->setAttribute("nonrotational", att.fNonRotational);
                    if (att.fDiscard)
                        pelmDevice->setAttribute("discard", att.fDiscard);
                    break;

                case DeviceType_DVD:
                    pcszType = "DVD";
                    pelmDevice->setAttribute("passthrough", att.fPassThrough);
                    if (att.fTempEject)
                        pelmDevice->setAttribute("tempeject", att.fTempEject);
                    break;

                case DeviceType_Floppy:
                    pcszType = "Floppy";
                    break;

                default: break; /* Shut up MSC. */
            }

            pelmDevice->setAttribute("type", pcszType);

            if (m->sv >= SettingsVersion_v1_15)
                pelmDevice->setAttribute("hotpluggable", att.fHotPluggable);

            pelmDevice->setAttribute("port", att.lPort);
            pelmDevice->setAttribute("device", att.lDevice);

            if (att.strBwGroup.length())
                pelmDevice->setAttribute("bandwidthGroup", att.strBwGroup);

            // attached image, if any
            if (!att.uuid.isZero()
                 && att.uuid.isValid()
                 && (att.deviceType == DeviceType_HardDisk
                      || !fSkipRemovableMedia
                    )
               )
            {
                xml::ElementNode *pelmImage = pelmDevice->createChild("Image");
                pelmImage->setAttribute("uuid", att.uuid.toStringCurly());

                // if caller wants a list of UUID elements, give it to them
                if (pllElementsWithUuidAttributes)
                    pllElementsWithUuidAttributes->push_back(pelmImage);
            }
            else if (    (m->sv >= SettingsVersion_v1_9)
                      && (att.strHostDriveSrc.length())
                    )
                pelmDevice->createChild("HostDrive")->setAttribute("src", att.strHostDriveSrc);
        }
    }
}

/**
 * Creates a \<Debugging\> node under elmParent and then writes out the XML
 * keys under that. Called for both the \<Machine\> node and for snapshots.
 *
 * @param pElmParent    Pointer to the parent element.
 * @param pDbg          Pointer to the debugging settings.
 */
void MachineConfigFile::buildDebuggingXML(xml::ElementNode *pElmParent, const Debugging *pDbg)
{
    if (m->sv < SettingsVersion_v1_13 || pDbg->areDefaultSettings())
        return;

    xml::ElementNode *pElmDebugging = pElmParent->createChild("Debugging");
    xml::ElementNode *pElmTracing   = pElmDebugging->createChild("Tracing");
    pElmTracing->setAttribute("enabled", pDbg->fTracingEnabled);
    pElmTracing->setAttribute("allowTracingToAccessVM", pDbg->fAllowTracingToAccessVM);
    pElmTracing->setAttribute("config", pDbg->strTracingConfig);
}

/**
 * Creates a \<Autostart\> node under elmParent and then writes out the XML
 * keys under that. Called for both the \<Machine\> node and for snapshots.
 *
 * @param pElmParent    Pointer to the parent element.
 * @param pAutostart    Pointer to the autostart settings.
 */
void MachineConfigFile::buildAutostartXML(xml::ElementNode *pElmParent, const Autostart *pAutostart)
{
    const char *pcszAutostop = NULL;

    if (m->sv < SettingsVersion_v1_13 || pAutostart->areDefaultSettings())
        return;

    xml::ElementNode *pElmAutostart = pElmParent->createChild("Autostart");
    pElmAutostart->setAttribute("enabled", pAutostart->fAutostartEnabled);
    pElmAutostart->setAttribute("delay", pAutostart->uAutostartDelay);

    switch (pAutostart->enmAutostopType)
    {
        case AutostopType_Disabled:     pcszAutostop = "Disabled";     break;
        case AutostopType_SaveState:    pcszAutostop = "SaveState";    break;
        case AutostopType_PowerOff:     pcszAutostop = "PowerOff";     break;
        case AutostopType_AcpiShutdown: pcszAutostop = "AcpiShutdown"; break;
        default:         Assert(false); pcszAutostop = "Disabled";     break;
    }
    pElmAutostart->setAttribute("autostop", pcszAutostop);
}

/**
 * Creates a \<Groups\> node under elmParent and then writes out the XML
 * keys under that. Called for the \<Machine\> node only.
 *
 * @param pElmParent    Pointer to the parent element.
 * @param pllGroups     Pointer to the groups list.
 */
void MachineConfigFile::buildGroupsXML(xml::ElementNode *pElmParent, const StringsList *pllGroups)
{
    if (   m->sv < SettingsVersion_v1_13 || pllGroups->size() == 0
        || (pllGroups->size() == 1 && pllGroups->front() == "/"))
        return;

    xml::ElementNode *pElmGroups = pElmParent->createChild("Groups");
    for (StringsList::const_iterator it = pllGroups->begin();
         it != pllGroups->end();
         ++it)
    {
        const Utf8Str &group = *it;
        xml::ElementNode *pElmGroup = pElmGroups->createChild("Group");
        pElmGroup->setAttribute("name", group);
    }
}

/**
 * Writes a single snapshot into the DOM tree. Initially this gets called from MachineConfigFile::write()
 * for the root snapshot of a machine, if present; elmParent then points to the \<Snapshots\> node under the
 * \<Machine\> node to which \<Snapshot\> must be added. This may then recurse for child snapshots.
 *
 * @param depth
 * @param elmParent
 * @param snap
 */
void MachineConfigFile::buildSnapshotXML(uint32_t depth,
                                         xml::ElementNode &elmParent,
                                         const Snapshot &snap)
{
    if (depth > SETTINGS_SNAPSHOT_DEPTH_MAX)
        throw ConfigFileError(this, NULL, N_("Maximum snapshot tree depth of %u exceeded"), SETTINGS_SNAPSHOT_DEPTH_MAX);

    xml::ElementNode *pelmSnapshot = elmParent.createChild("Snapshot");

    pelmSnapshot->setAttribute("uuid", snap.uuid.toStringCurly());
    pelmSnapshot->setAttribute("name", snap.strName);
    pelmSnapshot->setAttribute("timeStamp", stringifyTimestamp(snap.timestamp));

    if (snap.strStateFile.length())
        pelmSnapshot->setAttributePath("stateFile", snap.strStateFile);

    if (snap.strDescription.length())
        pelmSnapshot->createChild("Description")->addContent(snap.strDescription);

    // We only skip removable media for OVF, but OVF never includes snapshots.
    buildHardwareXML(*pelmSnapshot, snap.hardware, 0 /* fl */, NULL /* pllElementsWithUuidAttributes */);
    buildDebuggingXML(pelmSnapshot, &snap.debugging);
    buildAutostartXML(pelmSnapshot, &snap.autostart);
    // note: Groups exist only for Machine, not for Snapshot

    if (snap.llChildSnapshots.size())
    {
        xml::ElementNode *pelmChildren = pelmSnapshot->createChild("Snapshots");
        for (SnapshotsList::const_iterator it = snap.llChildSnapshots.begin();
             it != snap.llChildSnapshots.end();
             ++it)
        {
            const Snapshot &child = *it;
            buildSnapshotXML(depth + 1, *pelmChildren, child);
        }
    }
}

/**
 * Builds the XML DOM tree for the machine config under the given XML element.
 *
 * This has been separated out from write() so it can be called from elsewhere,
 * such as the OVF code, to build machine XML in an existing XML tree.
 *
 * As a result, this gets called from two locations:
 *
 *  --  MachineConfigFile::write();
 *
 *  --  Appliance::buildXMLForOneVirtualSystem()
 *
 * In fl, the following flag bits are recognized:
 *
 *  --  BuildMachineXML_MediaRegistry: If set, the machine's media registry will
 *      be written, if present. This is not set when called from OVF because OVF
 *      has its own variant of a media registry. This flag is ignored unless the
 *      settings version is at least v1.11 (VirtualBox 4.0).
 *
 *  --  BuildMachineXML_IncludeSnapshots: If set, descend into the snapshots tree
 *      of the machine and write out \<Snapshot\> and possibly more snapshots under
 *      that, if snapshots are present. Otherwise all snapshots are suppressed
 *      (when called from OVF).
 *
 *  --  BuildMachineXML_WriteVBoxVersionAttribute: If set, add a settingsVersion
 *      attribute to the machine tag with the vbox settings version. This is for
 *      the OVF export case in which we don't have the settings version set in
 *      the root element.
 *
 *  --  BuildMachineXML_SkipRemovableMedia: If set, removable media attachments
 *      (DVDs, floppies) are silently skipped. This is for the OVF export case
 *      until we support copying ISO and RAW media as well.  This flag is ignored
 *      unless the settings version is at least v1.9, which is always the case
 *      when this gets called for OVF export.
 *
 * --   BuildMachineXML_SuppressSavedState: If set, the Machine/stateFile
 *      attribute is never set. This is also for the OVF export case because we
 *      cannot save states with OVF.
 *
 * @param elmMachine XML \<Machine\> element to add attributes and elements to.
 * @param fl Flags.
 * @param pllElementsWithUuidAttributes pointer to list that should receive UUID elements or NULL;
 *        see buildStorageControllersXML() for details.
 */
void MachineConfigFile::buildMachineXML(xml::ElementNode &elmMachine,
                                        uint32_t fl,
                                        std::list<xml::ElementNode*> *pllElementsWithUuidAttributes)
{
    if (fl & BuildMachineXML_WriteVBoxVersionAttribute)
    {
        // add settings version attribute to machine element
        setVersionAttribute(elmMachine);
        LogRel(("Exporting settings file \"%s\" with version \"%s\"\n", m->strFilename.c_str(), m->strSettingsVersionFull.c_str()));
    }

    elmMachine.setAttribute("uuid", uuid.toStringCurly());
    elmMachine.setAttribute("name", machineUserData.strName);
    if (machineUserData.fDirectoryIncludesUUID)
        elmMachine.setAttribute("directoryIncludesUUID", machineUserData.fDirectoryIncludesUUID);
    if (!machineUserData.fNameSync)
        elmMachine.setAttribute("nameSync", machineUserData.fNameSync);
    if (machineUserData.strDescription.length())
        elmMachine.createChild("Description")->addContent(machineUserData.strDescription);
    elmMachine.setAttribute("OSType", machineUserData.strOsType);
    if (    strStateFile.length()
         && !(fl & BuildMachineXML_SuppressSavedState)
       )
        elmMachine.setAttributePath("stateFile", strStateFile);

    if ((fl & BuildMachineXML_IncludeSnapshots)
         && !uuidCurrentSnapshot.isZero()
         && uuidCurrentSnapshot.isValid())
        elmMachine.setAttribute("currentSnapshot", uuidCurrentSnapshot.toStringCurly());

    if (machineUserData.strSnapshotFolder.length())
        elmMachine.setAttributePath("snapshotFolder", machineUserData.strSnapshotFolder);
    if (!fCurrentStateModified)
        elmMachine.setAttribute("currentStateModified", fCurrentStateModified);
    elmMachine.setAttribute("lastStateChange", stringifyTimestamp(timeLastStateChange));
    if (fAborted)
        elmMachine.setAttribute("aborted", fAborted);

    switch (machineUserData.enmVMPriority)
    {
        case VMProcPriority_Flat:
            elmMachine.setAttribute("processPriority", "Flat");
            break;
        case VMProcPriority_Low:
            elmMachine.setAttribute("processPriority", "Low");
            break;
        case VMProcPriority_Normal:
            elmMachine.setAttribute("processPriority", "Normal");
            break;
        case VMProcPriority_High:
            elmMachine.setAttribute("processPriority", "High");
            break;
        default:
            break;
    }
    // Please keep the icon last so that one doesn't have to check if there
    // is anything in the line after this very long attribute in the XML.
    if (machineUserData.ovIcon.size())
    {
        Utf8Str strIcon;
        toBase64(strIcon, machineUserData.ovIcon);
        elmMachine.setAttribute("icon", strIcon);
    }
    if (    m->sv >= SettingsVersion_v1_9
        &&  (   machineUserData.fTeleporterEnabled
            ||  machineUserData.uTeleporterPort
            ||  !machineUserData.strTeleporterAddress.isEmpty()
            ||  !machineUserData.strTeleporterPassword.isEmpty()
            )
       )
    {
        xml::ElementNode *pelmTeleporter = elmMachine.createChild("Teleporter");
        pelmTeleporter->setAttribute("enabled", machineUserData.fTeleporterEnabled);
        pelmTeleporter->setAttribute("port", machineUserData.uTeleporterPort);
        pelmTeleporter->setAttribute("address", machineUserData.strTeleporterAddress);
        pelmTeleporter->setAttribute("password", machineUserData.strTeleporterPassword);
    }

    if (    (fl & BuildMachineXML_MediaRegistry)
         && (m->sv >= SettingsVersion_v1_11)
       )
        buildMediaRegistry(elmMachine, mediaRegistry);

    buildExtraData(elmMachine, mapExtraDataItems);

    if (    (fl & BuildMachineXML_IncludeSnapshots)
         && llFirstSnapshot.size())
        buildSnapshotXML(1, elmMachine, llFirstSnapshot.front());

    buildHardwareXML(elmMachine, hardwareMachine, fl, pllElementsWithUuidAttributes);
    buildDebuggingXML(&elmMachine, &debugging);
    buildAutostartXML(&elmMachine, &autostart);
    buildGroupsXML(&elmMachine, &machineUserData.llGroups);
}

/**
 * Returns true only if the given AudioDriverType is supported on
 * the current host platform. For example, this would return false
 * for AudioDriverType_DirectSound when compiled on a Linux host.
 * @param drv AudioDriverType_* enum to test.
 * @return true only if the current host supports that driver.
 */
/*static*/
bool MachineConfigFile::isAudioDriverAllowedOnThisHost(AudioDriverType_T drv)
{
    switch (drv)
    {
        case AudioDriverType_Null:
#ifdef RT_OS_WINDOWS
        case AudioDriverType_DirectSound:
#endif
#ifdef VBOX_WITH_AUDIO_OSS
        case AudioDriverType_OSS:
#endif
#ifdef VBOX_WITH_AUDIO_ALSA
        case AudioDriverType_ALSA:
#endif
#ifdef VBOX_WITH_AUDIO_PULSE
        case AudioDriverType_Pulse:
#endif
#ifdef RT_OS_DARWIN
        case AudioDriverType_CoreAudio:
#endif
#ifdef RT_OS_OS2
        case AudioDriverType_MMPM:
#endif
            return true;
        default: break; /* Shut up MSC. */
    }

    return false;
}

/**
 * Returns the AudioDriverType_* which should be used by default on this
 * host platform. On Linux, this will check at runtime whether PulseAudio
 * or ALSA are actually supported on the first call.
 *
 * @return Default audio driver type for this host platform.
 */
/*static*/
AudioDriverType_T MachineConfigFile::getHostDefaultAudioDriver()
{
#if defined(RT_OS_WINDOWS)
    return AudioDriverType_DirectSound;

#elif defined(RT_OS_LINUX)
    /* On Linux, we need to check at runtime what's actually supported. */
    static RTCLockMtx s_mtx;
    static AudioDriverType_T s_enmLinuxDriver = AudioDriverType_Null;
    RTCLock lock(s_mtx);
    if (s_enmLinuxDriver == AudioDriverType_Null)
    {
# ifdef VBOX_WITH_AUDIO_PULSE
        /* Check for the pulse library & that the pulse audio daemon is running. */
        if (RTProcIsRunningByName("pulseaudio") &&
            RTLdrIsLoadable("libpulse.so.0"))
            s_enmLinuxDriver = AudioDriverType_Pulse;
        else
# endif /* VBOX_WITH_AUDIO_PULSE */
# ifdef VBOX_WITH_AUDIO_ALSA
            /* Check if we can load the ALSA library */
             if (RTLdrIsLoadable("libasound.so.2"))
                s_enmLinuxDriver = AudioDriverType_ALSA;
        else
# endif /* VBOX_WITH_AUDIO_ALSA */
            s_enmLinuxDriver = AudioDriverType_OSS;
    }
    return s_enmLinuxDriver;

#elif defined(RT_OS_DARWIN)
    return AudioDriverType_CoreAudio;

#elif defined(RT_OS_OS2)
    return AudioDriverType_MMPM;

#else /* All other platforms. */
# ifdef VBOX_WITH_AUDIO_OSS
    return AudioDriverType_OSS;
# else
    /* Return NULL driver as a fallback if nothing of the above is available. */
    return AudioDriverType_Null;
# endif
#endif
}

/**
 * Called from write() before calling ConfigFileBase::createStubDocument().
 * This adjusts the settings version in m->sv if incompatible settings require
 * a settings bump, whereas otherwise we try to preserve the settings version
 * to avoid breaking compatibility with older versions.
 *
 * We do the checks in here in reverse order: newest first, oldest last, so
 * that we avoid unnecessary checks since some of these are expensive.
 */
void MachineConfigFile::bumpSettingsVersionIfNeeded()
{
    if (m->sv < SettingsVersion_v1_19)
    {
        // VirtualBox 7.0 adds iommu device.
        if (hardwareMachine.iommuType != IommuType_None)
        {
            m->sv = SettingsVersion_v1_19;
            return;
        }

        // VirtualBox 7.0 adds a Trusted Platform Module.
        if (   hardwareMachine.tpmSettings.tpmType != TpmType_None
            || hardwareMachine.tpmSettings.strLocation.isNotEmpty())
        {
            m->sv = SettingsVersion_v1_19;
            return;
        }

        NetworkAdaptersList::const_iterator netit;
        for (netit = hardwareMachine.llNetworkAdapters.begin();
             netit != hardwareMachine.llNetworkAdapters.end();
             ++netit)
        {
            // VirtualBox 7.0 adds a flag if NAT can reach localhost.
            if (   netit->fEnabled
                && netit->mode == NetworkAttachmentType_NAT
                && !netit->nat.fLocalhostReachable)
            {
                m->sv = SettingsVersion_v1_19;
                break;
            }

#ifdef VBOX_WITH_VMNET
            // VirtualBox 7.0 adds a host-only network attachment.
            if (netit->mode == NetworkAttachmentType_HostOnlyNetwork)
            {
                m->sv = SettingsVersion_v1_19;
                break;
            }
#endif /* VBOX_WITH_VMNET */
        }
    }

    if (m->sv < SettingsVersion_v1_18)
    {
        if (!hardwareMachine.nvramSettings.strNvramPath.isEmpty())
        {
            m->sv = SettingsVersion_v1_18;
            return;
        }

        // VirtualBox 6.1 adds AMD-V virtualized VMSAVE/VMLOAD setting.
        if (hardwareMachine.fVirtVmsaveVmload == false)
        {
            m->sv = SettingsVersion_v1_18;
            return;
        }

        // VirtualBox 6.1 adds a virtio-scsi storage controller.
        for (StorageControllersList::const_iterator it = hardwareMachine.storage.llStorageControllers.begin();
             it != hardwareMachine.storage.llStorageControllers.end();
             ++it)
        {
            const StorageController &sctl = *it;

            if (sctl.controllerType == StorageControllerType_VirtioSCSI)
            {
                m->sv = SettingsVersion_v1_18;
                return;
            }
        }

#ifdef VBOX_WITH_CLOUD_NET
        NetworkAdaptersList::const_iterator netit;
        for (netit = hardwareMachine.llNetworkAdapters.begin();
             netit != hardwareMachine.llNetworkAdapters.end();
             ++netit)
        {
            // VirtualBox 6.1 adds support for cloud networks.
            if (   netit->fEnabled
                && netit->mode == NetworkAttachmentType_Cloud)
            {
                m->sv = SettingsVersion_v1_18;
                break;
            }

        }
#endif /* VBOX_WITH_CLOUD_NET */
    }

    if (m->sv < SettingsVersion_v1_17)
    {
        if (machineUserData.enmVMPriority != VMProcPriority_Default)
        {
            m->sv = SettingsVersion_v1_17;
            return;
        }

        // VirtualBox 6.0 adds nested hardware virtualization, using native API (NEM).
        if (   hardwareMachine.fNestedHWVirt
            || hardwareMachine.fUseNativeApi)
        {
            m->sv = SettingsVersion_v1_17;
            return;
        }
        if (hardwareMachine.llSharedFolders.size())
            for (SharedFoldersList::const_iterator it = hardwareMachine.llSharedFolders.begin();
                 it != hardwareMachine.llSharedFolders.end();
                 ++it)
                if (it->strAutoMountPoint.isNotEmpty())
                {
                    m->sv = SettingsVersion_v1_17;
                    return;
                }

        /*
         * Check if any serial port uses a non 16550A serial port.
         */
        for (SerialPortsList::const_iterator it = hardwareMachine.llSerialPorts.begin();
             it != hardwareMachine.llSerialPorts.end();
             ++it)
        {
            const SerialPort &port = *it;
            if (port.uartType != UartType_U16550A)
            {
                m->sv = SettingsVersion_v1_17;
                return;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_16)
    {
        // VirtualBox 5.1 adds a NVMe storage controller, paravirt debug
        // options, cpu profile, APIC settings (CPU capability and BIOS).

        if (   hardwareMachine.strParavirtDebug.isNotEmpty()
            || (!hardwareMachine.strCpuProfile.equals("host") && hardwareMachine.strCpuProfile.isNotEmpty())
            || hardwareMachine.biosSettings.apicMode != APICMode_APIC
            || !hardwareMachine.fAPIC
            || hardwareMachine.fX2APIC
            || hardwareMachine.fIBPBOnVMExit
            || hardwareMachine.fIBPBOnVMEntry
            || hardwareMachine.fSpecCtrl
            || hardwareMachine.fSpecCtrlByHost
            || !hardwareMachine.fL1DFlushOnSched
            || hardwareMachine.fL1DFlushOnVMEntry
            || !hardwareMachine.fMDSClearOnSched
            || hardwareMachine.fMDSClearOnVMEntry)
        {
            m->sv = SettingsVersion_v1_16;
            return;
        }

        for (StorageControllersList::const_iterator it = hardwareMachine.storage.llStorageControllers.begin();
             it != hardwareMachine.storage.llStorageControllers.end();
             ++it)
        {
            const StorageController &sctl = *it;

            if (sctl.controllerType == StorageControllerType_NVMe)
            {
                m->sv = SettingsVersion_v1_16;
                return;
            }
        }

        for (CpuIdLeafsList::const_iterator it = hardwareMachine.llCpuIdLeafs.begin();
             it != hardwareMachine.llCpuIdLeafs.end();
             ++it)
            if (it->idxSub != 0)
            {
                m->sv = SettingsVersion_v1_16;
                return;
            }
    }

    if (m->sv < SettingsVersion_v1_15)
    {
        // VirtualBox 5.0 adds paravirt providers, explicit AHCI port hotplug
        // setting, USB storage controller, xHCI, serial port TCP backend
        // and VM process priority.

        /*
         * Check simple configuration bits first, loopy stuff afterwards.
         */
        if (   hardwareMachine.paravirtProvider != ParavirtProvider_Legacy
            || hardwareMachine.uCpuIdPortabilityLevel != 0)
        {
            m->sv = SettingsVersion_v1_15;
            return;
        }

        /*
         * Check whether the hotpluggable flag of all storage devices differs
         * from the default for old settings.
         * AHCI ports are hotpluggable by default every other device is not.
         * Also check if there are USB storage controllers.
         */
        for (StorageControllersList::const_iterator it = hardwareMachine.storage.llStorageControllers.begin();
             it != hardwareMachine.storage.llStorageControllers.end();
             ++it)
        {
            const StorageController &sctl = *it;

            if (sctl.controllerType == StorageControllerType_USB)
            {
                m->sv = SettingsVersion_v1_15;
                return;
            }

            for (AttachedDevicesList::const_iterator it2 = sctl.llAttachedDevices.begin();
                 it2 != sctl.llAttachedDevices.end();
                 ++it2)
            {
                const AttachedDevice &att = *it2;

                if (   (   att.fHotPluggable
                        && sctl.controllerType != StorageControllerType_IntelAhci)
                    || (   !att.fHotPluggable
                        && sctl.controllerType == StorageControllerType_IntelAhci))
                {
                    m->sv = SettingsVersion_v1_15;
                    return;
                }
            }
        }

        /*
         * Check if there is an xHCI (USB3) USB controller.
         */
        for (USBControllerList::const_iterator it = hardwareMachine.usbSettings.llUSBControllers.begin();
             it != hardwareMachine.usbSettings.llUSBControllers.end();
             ++it)
        {
            const USBController &ctrl = *it;
            if (ctrl.enmType == USBControllerType_XHCI)
            {
                m->sv = SettingsVersion_v1_15;
                return;
            }
        }

        /*
         * Check if any serial port uses the TCP backend.
         */
        for (SerialPortsList::const_iterator it = hardwareMachine.llSerialPorts.begin();
             it != hardwareMachine.llSerialPorts.end();
             ++it)
        {
            const SerialPort &port = *it;
            if (port.portMode == PortMode_TCP)
            {
                m->sv = SettingsVersion_v1_15;
                return;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_14)
    {
        // VirtualBox 4.3 adds default frontend setting, graphics controller
        // setting, explicit long mode setting, (video) capturing and NAT networking.
        if (   !hardwareMachine.strDefaultFrontend.isEmpty()
            || hardwareMachine.graphicsAdapter.graphicsControllerType != GraphicsControllerType_VBoxVGA
            || hardwareMachine.enmLongMode != Hardware::LongMode_Legacy
            || machineUserData.ovIcon.size() > 0
            || hardwareMachine.recordingSettings.fEnabled)
        {
            m->sv = SettingsVersion_v1_14;
            return;
        }
        NetworkAdaptersList::const_iterator netit;
        for (netit = hardwareMachine.llNetworkAdapters.begin();
             netit != hardwareMachine.llNetworkAdapters.end();
             ++netit)
        {
            if (netit->mode == NetworkAttachmentType_NATNetwork)
            {
                m->sv = SettingsVersion_v1_14;
                break;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_14)
    {
        unsigned cOhciCtrls = 0;
        unsigned cEhciCtrls = 0;
        bool fNonStdName = false;

        for (USBControllerList::const_iterator it = hardwareMachine.usbSettings.llUSBControllers.begin();
             it != hardwareMachine.usbSettings.llUSBControllers.end();
             ++it)
        {
            const USBController &ctrl = *it;

            switch (ctrl.enmType)
            {
                case USBControllerType_OHCI:
                    cOhciCtrls++;
                    if (ctrl.strName != "OHCI")
                        fNonStdName = true;
                    break;
                case USBControllerType_EHCI:
                    cEhciCtrls++;
                    if (ctrl.strName != "EHCI")
                        fNonStdName = true;
                    break;
                default:
                    /* Anything unknown forces a bump. */
                    fNonStdName = true;
            }

            /* Skip checking other controllers if the settings bump is necessary. */
            if (cOhciCtrls > 1 || cEhciCtrls > 1 || fNonStdName)
            {
                m->sv = SettingsVersion_v1_14;
                break;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_13)
    {
        // VirtualBox 4.2 adds tracing, autostart, UUID in directory and groups.
        if (   !debugging.areDefaultSettings()
            || !autostart.areDefaultSettings()
            || machineUserData.fDirectoryIncludesUUID
            || machineUserData.llGroups.size() > 1
            || machineUserData.llGroups.front() != "/")
            m->sv = SettingsVersion_v1_13;
    }

    if (m->sv < SettingsVersion_v1_13)
    {
        // VirtualBox 4.2 changes the units for bandwidth group limits.
        for (BandwidthGroupList::const_iterator it = hardwareMachine.ioSettings.llBandwidthGroups.begin();
             it != hardwareMachine.ioSettings.llBandwidthGroups.end();
             ++it)
        {
            const BandwidthGroup &gr = *it;
            if (gr.cMaxBytesPerSec % _1M)
            {
                // Bump version if a limit cannot be expressed in megabytes
                m->sv = SettingsVersion_v1_13;
                break;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_12)
    {
        // VirtualBox 4.1 adds PCI passthrough and emulated USB Smart Card reader
        if (   hardwareMachine.pciAttachments.size()
            || hardwareMachine.fEmulatedUSBCardReader)
            m->sv = SettingsVersion_v1_12;
    }

    if (m->sv < SettingsVersion_v1_12)
    {
        // VirtualBox 4.1 adds a promiscuous mode policy to the network
        // adapters and a generic network driver transport.
        NetworkAdaptersList::const_iterator netit;
        for (netit = hardwareMachine.llNetworkAdapters.begin();
             netit != hardwareMachine.llNetworkAdapters.end();
             ++netit)
        {
            if (   netit->enmPromiscModePolicy != NetworkAdapterPromiscModePolicy_Deny
                || netit->mode == NetworkAttachmentType_Generic
                || !netit->areGenericDriverDefaultSettings()
               )
            {
                m->sv = SettingsVersion_v1_12;
                break;
            }
        }
    }

    if (m->sv < SettingsVersion_v1_11)
    {
        // VirtualBox 4.0 adds HD audio, CPU priorities, ~fault tolerance~,
        // per-machine media registries, VRDE, JRockitVE, bandwidth groups,
        // ICH9 chipset
        if (    hardwareMachine.audioAdapter.controllerType == AudioControllerType_HDA
             || hardwareMachine.ulCpuExecutionCap != 100
             || mediaRegistry.llHardDisks.size()
             || mediaRegistry.llDvdImages.size()
             || mediaRegistry.llFloppyImages.size()
             || !hardwareMachine.vrdeSettings.strVrdeExtPack.isEmpty()
             || !hardwareMachine.vrdeSettings.strAuthLibrary.isEmpty()
             || machineUserData.strOsType == "JRockitVE"
             || hardwareMachine.ioSettings.llBandwidthGroups.size()
             || hardwareMachine.chipsetType == ChipsetType_ICH9
           )
            m->sv = SettingsVersion_v1_11;
    }

    if (m->sv < SettingsVersion_v1_10)
    {
        /* If the properties contain elements other than "TCP/Ports" and "TCP/Address",
         * then increase the version to at least VBox 3.2, which can have video channel properties.
         */
        unsigned cOldProperties = 0;

        StringsMap::const_iterator it = hardwareMachine.vrdeSettings.mapProperties.find("TCP/Ports");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;
        it = hardwareMachine.vrdeSettings.mapProperties.find("TCP/Address");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;

        if (hardwareMachine.vrdeSettings.mapProperties.size() != cOldProperties)
            m->sv = SettingsVersion_v1_10;
    }

    if (m->sv < SettingsVersion_v1_11)
    {
        /* If the properties contain elements other than "TCP/Ports", "TCP/Address",
         * "VideoChannel/Enabled" and "VideoChannel/Quality" then increase the version to VBox 4.0.
         */
        unsigned cOldProperties = 0;

        StringsMap::const_iterator it = hardwareMachine.vrdeSettings.mapProperties.find("TCP/Ports");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;
        it = hardwareMachine.vrdeSettings.mapProperties.find("TCP/Address");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;
        it = hardwareMachine.vrdeSettings.mapProperties.find("VideoChannel/Enabled");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;
        it = hardwareMachine.vrdeSettings.mapProperties.find("VideoChannel/Quality");
        if (it != hardwareMachine.vrdeSettings.mapProperties.end())
            cOldProperties++;

        if (hardwareMachine.vrdeSettings.mapProperties.size() != cOldProperties)
            m->sv = SettingsVersion_v1_11;
    }

    // settings version 1.9 is required if there is not exactly one DVD
    // or more than one floppy drive present or the DVD is not at the secondary
    // master; this check is a bit more complicated
    //
    // settings version 1.10 is required if the host cache should be disabled
    //
    // settings version 1.11 is required for bandwidth limits and if more than
    // one controller of each type is present.
    if (m->sv < SettingsVersion_v1_11)
    {
        // count attached DVDs and floppies (only if < v1.9)
        size_t cDVDs = 0;
        size_t cFloppies = 0;

        // count storage controllers (if < v1.11)
        size_t cSata = 0;
        size_t cScsiLsi = 0;
        size_t cScsiBuslogic = 0;
        size_t cSas = 0;
        size_t cIde = 0;
        size_t cFloppy = 0;

        // need to run thru all the storage controllers and attached devices to figure this out
        for (StorageControllersList::const_iterator it = hardwareMachine.storage.llStorageControllers.begin();
             it != hardwareMachine.storage.llStorageControllers.end();
             ++it)
        {
            const StorageController &sctl = *it;

            // count storage controllers of each type; 1.11 is required if more than one
            // controller of one type is present
            switch (sctl.storageBus)
            {
                case StorageBus_IDE:
                    cIde++;
                    break;
                case StorageBus_SATA:
                    cSata++;
                    break;
                case StorageBus_SAS:
                    cSas++;
                    break;
                case StorageBus_SCSI:
                    if (sctl.controllerType == StorageControllerType_LsiLogic)
                        cScsiLsi++;
                    else
                        cScsiBuslogic++;
                    break;
                case StorageBus_Floppy:
                    cFloppy++;
                    break;
                default:
                    // Do nothing
                    break;
            }

            if (   cSata > 1
                || cScsiLsi > 1
                || cScsiBuslogic > 1
                || cSas > 1
                || cIde > 1
                || cFloppy > 1)
            {
                m->sv = SettingsVersion_v1_11;
                break; // abort the loop -- we will not raise the version further
            }

            for (AttachedDevicesList::const_iterator it2 = sctl.llAttachedDevices.begin();
                 it2 != sctl.llAttachedDevices.end();
                 ++it2)
            {
                const AttachedDevice &att = *it2;

                // Bandwidth limitations are new in VirtualBox 4.0 (1.11)
                if (m->sv < SettingsVersion_v1_11)
                {
                    if (att.strBwGroup.length() != 0)
                    {
                        m->sv = SettingsVersion_v1_11;
                        break; // abort the loop -- we will not raise the version further
                    }
                }

                // disabling the host IO cache requires settings version 1.10
                if (    (m->sv < SettingsVersion_v1_10)
                     && (!sctl.fUseHostIOCache)
                   )
                    m->sv = SettingsVersion_v1_10;

                // we can only write the StorageController/@Instance attribute with v1.9
                if (    (m->sv < SettingsVersion_v1_9)
                     && (sctl.ulInstance != 0)
                   )
                    m->sv = SettingsVersion_v1_9;

                if (m->sv < SettingsVersion_v1_9)
                {
                    if (att.deviceType == DeviceType_DVD)
                    {
                         if (    (sctl.storageBus != StorageBus_IDE) // DVD at bus other than DVD?
                              || (att.lPort != 1)                    // DVDs not at secondary master?
                              || (att.lDevice != 0)
                            )
                            m->sv = SettingsVersion_v1_9;

                        ++cDVDs;
                    }
                    else if (att.deviceType == DeviceType_Floppy)
                        ++cFloppies;
                }
            }

            if (m->sv >= SettingsVersion_v1_11)
                break;  // abort the loop -- we will not raise the version further
        }

        // VirtualBox before 3.1 had zero or one floppy and exactly one DVD,
        // so any deviation from that will require settings version 1.9
        if (    (m->sv < SettingsVersion_v1_9)
             && (    (cDVDs != 1)
                  || (cFloppies > 1)
                )
           )
            m->sv = SettingsVersion_v1_9;
    }

    // VirtualBox 3.2: Check for non default I/O settings
    if (m->sv < SettingsVersion_v1_10)
    {
        if (   (hardwareMachine.ioSettings.fIOCacheEnabled != true)
            || (hardwareMachine.ioSettings.ulIOCacheSize != 5)
                // and page fusion
            || (hardwareMachine.fPageFusionEnabled)
                // and CPU hotplug, RTC timezone control, HID type and HPET
            || machineUserData.fRTCUseUTC
            || hardwareMachine.fCpuHotPlug
            || hardwareMachine.pointingHIDType != PointingHIDType_PS2Mouse
            || hardwareMachine.keyboardHIDType != KeyboardHIDType_PS2Keyboard
            || hardwareMachine.fHPETEnabled
           )
            m->sv = SettingsVersion_v1_10;
    }

    // VirtualBox 3.2 adds NAT and boot priority to the NIC config in Main
    // VirtualBox 4.0 adds network bandwitdth
    if (m->sv < SettingsVersion_v1_11)
    {
        NetworkAdaptersList::const_iterator netit;
        for (netit = hardwareMachine.llNetworkAdapters.begin();
             netit != hardwareMachine.llNetworkAdapters.end();
             ++netit)
        {
            if (    (m->sv < SettingsVersion_v1_12)
                 && (netit->strBandwidthGroup.isNotEmpty())
               )
            {
                /* New in VirtualBox 4.1 */
                m->sv = SettingsVersion_v1_12;
                break;
            }
            else if (    (m->sv < SettingsVersion_v1_10)
                      && (netit->fEnabled)
                      && (netit->mode == NetworkAttachmentType_NAT)
                      && (   netit->nat.u32Mtu != 0
                          || netit->nat.u32SockRcv != 0
                          || netit->nat.u32SockSnd != 0
                          || netit->nat.u32TcpRcv != 0
                          || netit->nat.u32TcpSnd != 0
                          || !netit->nat.fDNSPassDomain
                          || netit->nat.fDNSProxy
                          || netit->nat.fDNSUseHostResolver
                          || netit->nat.fAliasLog
                          || netit->nat.fAliasProxyOnly
                          || netit->nat.fAliasUseSamePorts
                          || netit->nat.strTFTPPrefix.length()
                          || netit->nat.strTFTPBootFile.length()
                          || netit->nat.strTFTPNextServer.length()
                          || netit->nat.mapRules.size()
                         )
                     )
            {
                m->sv = SettingsVersion_v1_10;
                // no break because we still might need v1.11 above
            }
            else if (    (m->sv < SettingsVersion_v1_10)
                      && (netit->fEnabled)
                      && (netit->ulBootPriority != 0)
                    )
            {
                m->sv = SettingsVersion_v1_10;
                // no break because we still might need v1.11 above
            }
        }
    }

    // all the following require settings version 1.9
    if (    (m->sv < SettingsVersion_v1_9)
         && (    (hardwareMachine.firmwareType >= FirmwareType_EFI)
              || machineUserData.fTeleporterEnabled
              || machineUserData.uTeleporterPort
              || !machineUserData.strTeleporterAddress.isEmpty()
              || !machineUserData.strTeleporterPassword.isEmpty()
              || (!hardwareMachine.uuid.isZero() && hardwareMachine.uuid.isValid())
            )
        )
        m->sv = SettingsVersion_v1_9;

    // "accelerate 2d video" requires settings version 1.8
    if (    (m->sv < SettingsVersion_v1_8)
         && (hardwareMachine.graphicsAdapter.fAccelerate2DVideo)
       )
        m->sv = SettingsVersion_v1_8;

    // The hardware versions other than "1" requires settings version 1.4 (2.1+).
    if (    m->sv < SettingsVersion_v1_4
         && hardwareMachine.strVersion != "1"
       )
        m->sv = SettingsVersion_v1_4;
}

/**
 * Called from Main code to write a machine config file to disk. This builds a DOM tree from
 * the member variables and then writes the XML file; it throws xml::Error instances on errors,
 * in particular if the file cannot be written.
 */
void MachineConfigFile::write(const com::Utf8Str &strFilename)
{
    try
    {
        // createStubDocument() sets the settings version to at least 1.7; however,
        // we might need to enfore a later settings version if incompatible settings
        // are present:
        bumpSettingsVersionIfNeeded();

        m->strFilename = strFilename;
        specialBackupIfFirstBump();
        createStubDocument();

        xml::ElementNode *pelmMachine = m->pelmRoot->createChild("Machine");
        buildMachineXML(*pelmMachine,
                          MachineConfigFile::BuildMachineXML_IncludeSnapshots
                        | MachineConfigFile::BuildMachineXML_MediaRegistry,
                            // but not BuildMachineXML_WriteVBoxVersionAttribute
                        NULL); /* pllElementsWithUuidAttributes */

        // now go write the XML
        xml::XmlFileWriter writer(*m->pDoc);
        writer.write(m->strFilename.c_str(), true /*fSafe*/);

        m->fFileExists = true;
        clearDocument();
    }
    catch (...)
    {
        clearDocument();
        throw;
    }
}