source: vbox/trunk/src/VBox/Main/UnattendedTemplates/os2_response_files.rsp@ 98278

@@VBOX_SPLITTER_START[CONFIG.SYS]@@
REM
REM $Id: os2_response_files.rsp 93154 2022-01-09 10:33:42Z vboxsync $
REM VirtualBox CID Installation CONFIG.SYS for boot CD/floppy.
REM

REM Put the CDROM as letter S:.
RESERVEDRIVELETTER=R
LASTDRIVE=Z

BUFFERS=32
DISKCACHE=D2,LW

MEMMAN=NOSWAP,PROTECT
PROTECTONLY=YES
IOPL=YES

PAUSEONERROR=NO
BREAK=OFF

REM Just to be on the safe side, all paths include disk #0 thru #6.
REM as it doesn't contain much interesting.
REM Also adding typical C:\ locations for good measure...
  LIBPATH=.;A:\;S:\OS2IMAGE\DISK_0;S:\OS2IMAGE\DISK_1;S:\OS2IMAGE\DISK_2;S:\OS2IMAGE\DISK_3;S:\OS2IMAGE\DISK_4;S:\OS2IMAGE\DISK_5;S:\OS2IMAGE\DISK_6;S:\OS2IMAGE\DISK_7;C:\OS2\DLL;C:\MPTN\DLL;C:\TCPIP\DLL;C:\IBMCOM\DLL;
SET  PATH=.;A:\;S:\OS2IMAGE\DISK_0;S:\OS2IMAGE\DISK_1;S:\OS2IMAGE\DISK_2;S:\OS2IMAGE\DISK_3;S:\OS2IMAGE\DISK_4;S:\OS2IMAGE\DISK_5;S:\OS2IMAGE\DISK_6;S:\OS2IMAGE\DISK_7;C:\OS2;C:\OS2\SYSTEM;
SET DPATH=.;A:\;S:\OS2IMAGE\DISK_0;S:\OS2IMAGE\DISK_1;S:\OS2IMAGE\DISK_2;S:\OS2IMAGE\DISK_3;S:\OS2IMAGE\DISK_4;S:\OS2IMAGE\DISK_5;S:\OS2IMAGE\DISK_6;S:\OS2IMAGE\DISK_7;C:\OS2;C:\OS2\SYSTEM;

COUNTRY=001,COUNT437.SYS
CODEPAGE=850,437
DEVINFO=KBD,US,KEYBOARD.DCP
DEVINFO=SCR,VGA,VIO437.DCP

BASEDEV=IBMKBD.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=IBMIDECD.FLT
BASEDEV=OS2DASD.DMD
BASEDEV=OS2LVM.DMD
DEVICE=TESTCFG.SYS
DEVICE=OS2CDROM.DMD
DEVICE=DOS.SYS

IFS=CDFS.IFS
REM From here on we can load off the ISO.
IFS=S:\OS2IMAGE\DISK_2\HPFS.IFS /C:2048
IFS=S:\OS2IMAGE\DISK_2\JFS.IFS

SET OS2_SHELL=S:\OS2IMAGE\DISK_2\CMD.EXE
REM PROTSHELL=S:\OS2IMAGE\DISK_2\CMD.EXE
REM Run the os2_cid_install.cmd file (renamed to VBOXCID.CMD on the ISO).
REM PROTSHELL=S:\OS2IMAGE\DISK_2\CMD.EXE /C S:\VBOXCID\OS2_UTIL.EXE --tee-to-backdoor --tee-to-file C:\VBoxCID\Phase1.log --append -- S:\OS2IMAGE\DISK_2\CMD.EXE /C S:\VBOXCID.CMD PHASE1
PROTSHELL=S:\VBOXCID\OS2_UTIL.EXE --tee-to-backdoor --tee-to-file C:\VBoxCID\Phase1.log --append -- S:\OS2IMAGE\DISK_2\CMD.EXE /C S:\VBOXCID.CMD PHASE1

@@VBOX_SPLITTER_END[CONFIG.SYS]@@

#
# An "Y" for the format command.
#
@@VBOX_SPLITTER_START[YES.TXT]@@
Y
@@VBOX_SPLITTER_END[YES.TXT]@@

#
# This is the startup.cmd file that ends up on the final C:.
#
@@VBOX_SPLITTER_START[STARTUP.CMD]@@
@REM
@REM $Id: os2_response_files.rsp 93154 2022-01-09 10:33:42Z vboxsync $
@REM The startup file for C: for use after the successful install.
@REM
@@VBOX_COND_IS_INSTALLING_ADDITIONS@@
C:\VBoxAdd\VBoxService.exe
@@VBOX_COND_END@@
dhcpstrt -i lan0
@@VBOX_COND_IS_INSTALLING_TEST_EXEC_SERVICE@@
SET ENDLIBPATH=C:\VBoxValKit
C:\VBoxValKit\TestExecService.exe --scratch=D:\TestArea --cdrom=E:\ --foreground
pause
@@VBOX_COND_END@@

@@VBOX_SPLITTER_END[STARTUP.CMD]@@

#
# The OS2.RSP file is the main installer response file.
#
@@VBOX_SPLITTER_START[OS2.RSP]@@
RebootRequired=0
ExitOnError=1
BaseFileSystem=1
AlternateAdapter=0
CDROM=2
APM=1
AdditionalPrinters=0
CountryCode=001
CountryKeyboard=US
DefaultPrinter=0
DisplayAdapter=7
Documentation=1
DOSSupport=1
WIN-OS/2Support=1
WIN-OS/2Desktop=0
DPMI=1
IBMFONTA.Selection=0
IBMFONTG.Selection=0
IBMFONTT.Selection=0
IBMFONTJ.Selection=0
IBMFONTC.Selection=0
IBMFONTS.Selection=0
IBMFONTK.Selection=0
IBMFONTU.Selection=1
XIBMFONT.InstDrive=C:
FormatPartition=0
Locale=en_US
MigrateConfigFiles=0
Mouse=1
MousePort=0
OptionalSystemUtilities=1
OptionalSystemComponents=1
PCMCIA=0
PCMCIAOptions=0
Optical=0
HOTPLUG.Selection=0
WARMSWAP.Selection=0
PrimaryCodePage=1
PrinterPort=1
ProcessEnvironment=1
ProgressIndication=1
SCSI=0
SerialDeviceSupport=1
SourcePath=S:\os2image
TargetDrive=C:
*WIN-OS/2TargetDrive=C:
SMP=0
SMPPath=C:\OS2\BOOT
ToolsAndGames=1
MultimediaSupport=1
PUMARKNET.Selection=0
PUMARKNET.TarDrv=C:
PUMARKVIS.Selection=0
PUMARKVIS.TarDrv=C:
LVMGUI.Selection=1
Java11.Selection=1
Runtime.Selection=1
FIBASE.JavaDrive=C:
SeedConfigSysLine=PAUSEONERROR=NO
@@VBOX_SPLITTER_END[OS2.RSP]@@

#
# Multi-Protocol Transport Services (MPTS) response file.
#
@@VBOX_SPLITTER_START[MPTS.RSP]@@
INST_SECTION = (
  UPGRADE_LEVEL = SAME
  INSTALL = PRODUCT
)
MPTS = (
  [CONTROL]
    Local_IPC = YES
    INET_Access = YES
    NETBIOS_Access = YES
)

PROTOCOL = (
[PROT_MAN]

   DRIVERNAME = PROTMAN$

[IBMLXCFG]

   netbeui_nif = netbeui.nif
   tcpbeui_nif = tcpbeui.nif
   tcpip_nif   = tcpip.nif
   IBMEAN_nif  = IBMEAN.nif

[NETBIOS]

   DriverName = netbios$
   ADAPTER0 = netbeui$,0
   ADAPTER1 = tcpbeui$,1

[netbeui_nif]

   DriverName = netbeui$
   Bindings = IBMEAN_nif
   ETHERAND_TYPE = "I"
   USEADDRREV = "YES"
   OS2TRACEMASK = 0x0
   SESSIONS = 130
   NCBS = 225
   NAMES = 21
   SELECTORS = 50
   USEMAXDATAGRAM = "NO"
   ADAPTRATE = 1000
   WINDOWERRORS = 0
   MAXDATARCV = 4168
   TI = 30000
   T1 = 1000
   T2 = 200
   MAXIN = 1
   MAXOUT = 1
   NETBIOSTIMEOUT = 500
   NETBIOSRETRIES = 3
   NAMECACHE = 1000
   RNDOPTION = 1
   PIGGYBACKACKS = 1
   DATAGRAMPACKETS = 50
   PACKETS = 300
   LOOPPACKETS = 8
   PIPELINE = 5
   MAXTRANSMITS = 6
   MINTRANSMITS = 2
   DLCRETRIES = 10
   FCPRIORITY = 5
   NETFLAGS = 0x0

[tcpbeui_nif]

   DriverName = tcpbeui$
   Bindings = ,IBMEAN_nif
   NODETYPE = "B-Node"
   OS2TRACEMASK = 0x0
   SESSIONS = 130
   NCBS = 225
   NAMES = 21
   SELECTORS = 15
   USEMAXDATAGRAM = "NO"
   NETBIOSTIMEOUT = 500
   NETBIOSRETRIES = 2
   NAMECACHE = 1000
   PURGECACHE = 0
   PRELOADCACHE = "NO"
   NAMESFILE = 0
   DATAGRAMPACKETS = 20
   PACKETS = 50
   ENABLEDNS = 0
   INTERFACERATE = 300

[tcpip_nif]

   DriverName = TCPIP$
   Bindings = IBMEAN_nif

[IBMEAN_nif]

   DriverName = IBMEAN$
)
@@VBOX_SPLITTER_END[MPTS.RSP]@@

#
# IBM Lan Manager response file installing both TCP and old NETBIOS.
#
@@VBOX_SPLITTER_START[IBMLAN.RSP]@@
UPDATEIBMLAN = Networks<
  net1 = NETBEUI$,0,LM10,34,70,14
  net2 = TCPBEUI$,1,LM10,34,70,14
>

ADDIBMLAN = Requester<
wrkservices = MESSENGER
wrknets = NET1, NET2
>

UPDATEIBMLAN = Requester<
Computername = VBOXACP2
Domain = VBOXGUEST
useallmem = Yes
>

UPDATEIBMLAN = Peer<
srvnets = NET1,NET2
>

ConfigTargetDrive = C
ConfigAutoStartLS = Migrate
ConfigSourceDrive = C
InstallAPI = INSTALLIFREQUIRED
InstallDosLanApi = INSTALLIFREQUIRED
InstallInstallProgram = INSTALLIFREQUIRED
InstallPeerService = INSTALL
InstallRequester = INSTALLIFREQUIRED
InstallUPM = INSTALLIFREQUIRED
InstallMSGPopup = INSTALLIFREQUIRED
InstallGUI = INSTALL
InstallClipBoard = INSTALLIFREQUIRED
InstallDesktopIcons = YES

@@VBOX_SPLITTER_END[IBMLAN.RSP]@@

#
# Multimedia Presentation Manager/2 response file - Setting up SB16.
#
@@VBOX_SPLITTER_START[MMOS2.RSP]@@
MMINSTSOURCE = "C:\\mmtemp"
MMINSTTARGET = "C:"
CHANGECONFIG = "Y"

MMINSTGROUPS =
  (
  GROUP.1 = " "
  GROUP.2 = "Software Motion Video=NUM=1,"
  GROUP.4 = "IBM Video Capture Adapter=NUM=0,"
  GROUP.5 = "1"
  GROUP.14 = " "
  GROUP.19 = " "
  GROUP.20 = " "
  GROUP.43 = "Sound Blaster 16=NUM=1,V1=1,V1=5,V1=5,V1=220,V1=330,"
  )
@@VBOX_SPLITTER_END[MMOS2.RSP]@@

#
# Good old netscape communicator.
#
@@VBOX_SPLITTER_START[NETSCAPE.RSP]@@
COMP             = Netscape Communicator 4.61 for OS/2
FILE             = C:\NETSCAPE
CFGUPDATE        = AUTO
DELETEBACKUP     = NO
OVERWRITE        = YES
SAVEBACKUP       = NO
NSCONVERTBROWSER = YES
NSCONVERTQL      = YES
NSASSOCIATEHTML  = YES
@@VBOX_SPLITTER_END[NETSCAPE.RSP]@@