vboxconfig.sh@ 95685

Last change on this file since 95685 was 95622, checked in by vboxsync, 2 years ago
/Config.kmk,Installer/solaris,xpcom18a4/{Config.kmk,Makefile.kmk},tools/Makefile.kmk: Remove the "legacy" Solaris 10 libraries (libstdc++.so.6, libxcb.so.1, libgcc_s.so.1, libX11-xcb.so.1, libGL.so.1, libX11.so.4) added in r107933 and all vestiges of their presence in Makefiles and installation scripts. These libraries were bundled in order to run VirtualBox on Solaris 10 hosts since they are part of optional package clusters like SUNWCuser which might not be installed so were packaged with VirtualBox in a /legacy/ subdirectory under /opt/VirtualBox. Solaris 10 is no longer supported as a host so these unused bits can go now.
Property svn:eol-style set to `LF` Property svn:executable set to ``* Property svn:keywords set to `Author Date Id Revision`
File size: 49.7 KB

Line
1	#!/bin/sh
2	# $Id: vboxconfig.sh 95622 2022-07-13 17:49:31Z vboxsync $
3	## @file
4	# VirtualBox Configuration Script, Solaris host.
5	#
6
7	#
8	# Copyright (C) 2009-2022 Oracle Corporation
9	#
10	# This file is part of VirtualBox Open Source Edition (OSE), as
11	# available from http://www.virtualbox.org. This file is free software;
12	# you can redistribute it and/or modify it under the terms of the GNU
13	# General Public License (GPL) as published by the Free Software
14	# Foundation, in version 2 as it comes in the "COPYING" file of the
15	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
16	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
17	#
18
19	# Never use exit 2 or exit 20 etc., the return codes are used in
20	# SRv4 postinstall procedures which carry special meaning. Just use exit 1 for failure.
21
22	# LC_ALL should take precedence over LC_* and LANG but whatever...
23	LC_ALL=C
24	export LC_ALL
25
26	LANG=C
27	export LANG
28
29	VBOX_INSTALL_PATH="$PKG_INSTALL_ROOT/opt/VirtualBox"
30	CONFIG_DIR=/etc/vbox
31	CONFIG_FILES=filelist
32	DIR_CONF="$PKG_INSTALL_ROOT/platform/i86pc/kernel/drv"
33	DIR_MOD_32="$PKG_INSTALL_ROOT/platform/i86pc/kernel/drv"
34	DIR_MOD_64="$DIR_MOD_32/amd64"
35
36	# Default paths, these will be overridden by 'which' if they don't exist
37	BIN_ADDDRV=/usr/sbin/add_drv
38	BIN_REMDRV=/usr/sbin/rem_drv
39	BIN_MODLOAD=/usr/sbin/modload
40	BIN_MODUNLOAD=/usr/sbin/modunload
41	BIN_MODINFO=/usr/sbin/modinfo
42	BIN_DEVFSADM=/usr/sbin/devfsadm
43	BIN_BOOTADM=/sbin/bootadm
44	BIN_SVCADM=/usr/sbin/svcadm
45	BIN_SVCCFG=/usr/sbin/svccfg
46	BIN_SVCS=/usr/bin/svcs
47	BIN_IFCONFIG=/sbin/ifconfig
48	BIN_SVCS=/usr/bin/svcs
49	BIN_ID=/usr/bin/id
50	BIN_PKILL=/usr/bin/pkill
51	BIN_PGREP=/usr/bin/pgrep
52	BIN_IPADM=/usr/sbin/ipadm
53
54	# "vboxdrv" is also used in sed lines here (change those as well if it ever changes)
55	MOD_VBOXDRV=vboxdrv
56	DESC_VBOXDRV="Host"
57
58	MOD_VBOXNET=vboxnet
59	DESC_VBOXNET="NetAdapter"
60	MOD_VBOXNET_INST=8
61
62	MOD_VBOXFLT=vboxflt
63	DESC_VBOXFLT="NetFilter (STREAMS)"
64
65	MOD_VBOXBOW=vboxbow
66	DESC_VBOXBOW="NetFilter (Crossbow)"
67
68	MOD_VBOXUSBMON=vboxusbmon
69	DESC_VBOXUSBMON="USBMonitor"
70
71	MOD_VBOXUSB=vboxusb
72	DESC_VBOXUSB="USB"
73
74	UPDATEBOOTARCHIVE=0
75	REMOTEINST=0
76	FATALOP=fatal
77	NULLOP=nulloutput
78	SILENTOP=silent
79	IPSOP=ips
80	ISSILENT=
81	ISIPS=
82
83	infoprint()
84	{
85	if test "x$ISSILENT" != "x$SILENTOP"; then
86	echo 1>&2 "$1"
87	fi
88	}
89
90	subprint()
91	{
92	if test "x$ISSILENT" != "x$SILENTOP"; then
93	echo 1>&2 " - $1"
94	fi
95	}
96
97	warnprint()
98	{
99	if test "x$ISSILENT" != "x$SILENTOP"; then
100	echo 1>&2 " * Warning!! $1"
101	fi
102	}
103
104	errorprint()
105	{
106	echo 1>&2 "## $1"
107	}
108
109	helpprint()
110	{
111	echo 1>&2 "$1"
112	}
113
114	printusage()
115	{
116	helpprint "VirtualBox Configuration Script"
117	helpprint "usage: $0 <operation> [options]"
118	helpprint
119	helpprint "<operation> must be one of the following:"
120	helpprint " --postinstall Perform full post installation procedure"
121	helpprint " --preremove Perform full pre remove procedure"
122	helpprint " --installdrivers Only install the drivers"
123	helpprint " --removedrivers Only remove the drivers"
124	helpprint " --setupdrivers Setup drivers, reloads existing drivers"
125	helpprint
126	helpprint "[options] are one or more of the following:"
127	helpprint " --silent Silent mode"
128	helpprint " --fatal Don't continue on failure (required for postinstall)"
129	helpprint " --ips This is an IPS package postinstall/preremove"
130	helpprint " --altkerndir Use /usr/kernel/drv as the driver directory"
131	helpprint
132	}
133
134	# find_bin_path()
135	# !! failure is always fatal
136	find_bin_path()
137	{
138	if test -z "$1"; then
139	errorprint "missing argument to find_bin_path()"
140	exit 1
141	fi
142
143	binfilename=`basename $1`
144	binfilepath=`which $binfilename 2> /dev/null`
145	if test -x "$binfilepath"; then
146	echo "$binfilepath"
147	return 0
148	else
149	errorprint "$1 missing or is not an executable"
150	exit 1
151	fi
152	}
153
154	# find_bins()
155	# !! failure is always fatal
156	find_bins()
157	{
158	# Search only for binaries that might be in different locations
159	if test ! -x "$BIN_ID"; then
160	BIN_ID=`find_bin_path "$BIN_ID"`
161	fi
162
163	if test ! -x "$BIN_ADDDRV"; then
164	BIN_ADDDRV=`find_bin_path "$BIN_ADDDRV"`
165	fi
166
167	if test ! -x "$BIN_REMDRV"; then
168	BIN_REMDRV=`find_bin_path "$BIN_REMDRV"`
169	fi
170
171	if test ! -x "$BIN_MODLOAD"; then
172	BIN_MODLOAD=`check_bin_path "$BIN_MODLOAD"`
173	fi
174
175	if test ! -x "$BIN_MODUNLOAD"; then
176	BIN_MODUNLOAD=`find_bin_path "$BIN_MODUNLOAD"`
177	fi
178
179	if test ! -x "$BIN_MODINFO"; then
180	BIN_MODINFO=`find_bin_path "$BIN_MODINFO"`
181	fi
182
183	if test ! -x "$BIN_DEVFSADM"; then
184	BIN_DEVFSADM=`find_bin_path "$BIN_DEVFSADM"`
185	fi
186
187	if test ! -x "$BIN_BOOTADM"; then
188	BIN_BOOTADM=`find_bin_path "$BIN_BOOTADM"`
189	fi
190
191	if test ! -x "$BIN_SVCADM"; then
192	BIN_SVCADM=`find_bin_path "$BIN_SVCADM"`
193	fi
194
195	if test ! -x "$BIN_SVCCFG"; then
196	BIN_SVCCFG=`find_bin_path "$BIN_SVCCFG"`
197	fi
198
199	if test ! -x "$BIN_SVCS"; then
200	BIN_SVCS=`find_bin_path "$BIN_SVCS"`
201	fi
202
203	if test ! -x "$BIN_IFCONFIG"; then
204	BIN_IFCONFIG=`find_bin_path "$BIN_IFCONFIG"`
205	fi
206
207	if test ! -x "$BIN_PKILL"; then
208	BIN_PKILL=`find_bin_path "$BIN_PKILL"`
209	fi
210
211	if test ! -x "$BIN_PGREP"; then
212	BIN_PGREP=`find_bin_path "$BIN_PGREP"`
213	fi
214
215	if test ! -x "$BIN_IPADM"; then
216	BIN_IPADM=`find_bin_path "$BIN_IPADM"`
217	fi
218	}
219
220	# check_root()
221	# !! failure is always fatal
222	check_root()
223	{
224	# Don't use "-u" option as some id binaries don't support it, instead
225	# rely on "uid=101(username) gid=10(groupname) groups=10(staff)" output
226	curuid=`$BIN_ID \| cut -f 2 -d '=' \| cut -f 1 -d '('`
227	if test "$curuid" -ne 0; then
228	errorprint "This script must be run with administrator privileges."
229	exit 1
230	fi
231	}
232
233	# get_unofficial_sysinfo()
234	# cannot fail
235	get_unofficial_sysinfo()
236	{
237	HOST_OS_MAJORVERSION="11"
238	HOST_OS_MINORVERSION="151"
239	}
240
241	# get_s11_4_sysinfo()
242	# cannot fail
243	get_s11_4_sysinfo()
244	{
245	# See check in plumb_net for why this is > 174. The alternative is we declare 11.4+ as S12 with
246	# a more accurate minor (build) version number. For now this is sufficient to workaround the ever
247	# changing version numbering policy.
248	HOST_OS_MAJORVERSION="11"
249	HOST_OS_MINORVERSION="175"
250	}
251
252	# get_s11_5_or_newer_sysinfo()
253	# cannot fail
254	get_s11_5_or_newer_sysinfo()
255	{
256	# See check in plumb_net for why this is 176.
257	HOST_OS_MAJORVERSION="11"
258	HOST_OS_MINORVERSION="176"
259	}
260
261	# get_sysinfo()
262	# cannot fail
263	get_sysinfo()
264	{
265	STR_OSVER=`uname -v`
266	case "$STR_OSVER" in
267	# First check 'uname -v' and weed out the recognized, unofficial distros of Solaris
268	omnios\|oi_\|illumos*)
269	get_unofficial_sysinfo
270	return 0
271	;;
272	# Quick escape workaround for Solaris 11.4, changes the pkg FMRI (yet again). See BugDB #26494983.
273	11.4.*)
274	get_s11_4_sysinfo
275	return 0
276	;;
277	# Quick escape workaround for Solaris 11.5. See BugDB #26494983.
278	11.5.*)
279	get_s11_5_or_newer_sysinfo
280	return 0
281	esac
282
283	BIN_PKG=`which pkg 2> /dev/null`
284	if test -x "$BIN_PKG"; then
285	PKGFMRI=`$BIN_PKG $BASEDIR_PKGOPT contents -H -t set -a name=pkg.fmri -o pkg.fmri pkg:/system/kernel 2> /dev/null`
286	if test -z "$PKGFMRI"; then
287	# Perhaps this is old pkg without '-a' option and/or system/kernel is missing and it's part of 'entire'
288	# Try fallback.
289	PKGFMRI=`$BIN_PKG $BASEDIR_PKGOPT contents -H -t set -o pkg.fmri entire \| head -1 2> /dev/null`
290	if test -z "$PKGFMRI"; then
291	# Perhaps entire is conflicting. Try using opensolaris/entire.
292	# Last fallback try.
293	PKGFMRI=`$BIN_PKG $BASEDIR_PKGOPT contents -H -t set -o pkg.fmri opensolaris.org/entire \| head -1 2> /dev/null`
294	fi
295	fi
296	if test ! -z "$PKGFMRI"; then
297	# The format is "pkg://solaris/system/kernel@0.5.11,5.11-0.161:20110315T070332Z"
298	# or "pkg://solaris/system/kernel@5.12,5.11-5.12.0.0.0.4.1:20120908T030246Z"
299	# or "pkg://solaris/system/kernel@0.5.11,5.11-0.175.0.0.0.1.0:20111012T032837Z"
300	# or "pkg://solaris/system/kernel@5.12-5.12.0.0.0.9.1.3.0:20121012T032837Z" [1]
301	# [1]: The sed below doesn't handle this. It's instead parsed below in the PSARC/2012/240 case.
302	STR_KERN_MAJOR=`echo "$PKGFMRI" \| sed 's/^.\@//;s/\,.//'`
303	if test ! -z "$STR_KERN_MAJOR"; then
304	# The format is "0.5.11" or "5.12"
305	# Let us just hardcode these for now, instead of trying to do things more generically. It's not
306	# worth trying to bring more order to chaos as it's clear that the version numbering is subject to breakage
307	# as it has been seen in the past.
308	if test "x$STR_KERN_MAJOR" = "x5.12"; then
309	HOST_OS_MAJORVERSION="12"
310	elif test "x$STR_KERN_MAJOR" = "x0.5.11" \|\| test "x$STR_KERN_MAJOR" = "x5.11"; then
311	HOST_OS_MAJORVERSION="11"
312	else
313	# This could be the PSARC/2012/240 naming scheme for S12.
314	# The format is "pkg://solaris/system/kernel@5.12-5.12.0.0.0.9.1.3.0:20121012T032837Z"
315	# The "5.12" following the "@" is the nominal version which we ignore for now as it is
316	# not set by most pkg(5) tools...
317	# STR_KERN_MAJOR is now of the format "5.12-5.12.0.0.0.9.1.3.0:20121012T032837Z" with '9' representing
318	# the build number.
319	BRANCH_VERSION=$STR_KERN_MAJOR
320	HOST_OS_MAJORVERSION=`echo "$BRANCH_VERSION" \| cut -f2 -d'-' \| cut -f1,2 -d'.'`
321	if test "x$HOST_OS_MAJORVERSION" = "x5.12"; then
322	HOST_OS_MAJORVERSION="12"
323	HOST_OS_MINORVERSION=`echo "$BRANCH_VERSION" \| cut -f2 -d'-' \| cut -f6 -d'.'`
324	return 0
325	else
326	errorprint "Failed to parse the Solaris kernel major version."
327	exit 1
328	fi
329	fi
330
331	# This applies only to S11 and S12 where the transitional "@5.12," component version is
332	# still part of the pkg(5) package FMRI. The regular S12 will follow the PSARC/2012/240 naming scheme above.
333	STR_KERN_MINOR=`echo "$PKGFMRI" \| sed 's/^.\@//;s/\:.//;s/.*,//'`
334	if test ! -z "$STR_KERN_MINOR"; then
335	# The HOST_OS_MINORVERSION is represented as follows:
336	# For S12 it represents the build numbers. e.g. for 4 : "5.11-5.12.0.0.0.4.1"
337	# For S11 as the "nevada" version numbers. e.g. for 175: "5.11-0.161" or "5.11-0.175.0.0.0.1.0"
338	if test "$HOST_OS_MAJORVERSION" -eq 12; then
339	HOST_OS_MINORVERSION=`echo "$STR_KERN_MINOR" \| cut -f2 -d'-' \| cut -f6 -d'.'`
340	elif test "$HOST_OS_MAJORVERSION" -eq 11; then
341	HOST_OS_MINORVERSION=`echo "$STR_KERN_MINOR" \| cut -f2 -d'-' \| cut -f2 -d'.'`
342	else
343	errorprint "Solaris kernel major version $HOST_OS_MAJORVERSION not supported."
344	exit 1
345	fi
346	else
347	errorprint "Failed to parse the Solaris kernel minor version."
348	exit 1
349	fi
350	else
351	errorprint "Failed to parse the Solaris kernel package version."
352	exit 1
353	fi
354	else
355	errorprint "Failed to detect the Solaris kernel package FMRI."
356	exit 1
357	fi
358	else
359	HOST_OS_MAJORVERSION=`uname -r`
360	if test -z "$HOST_OS_MAJORVERSION" \|\| test "x$HOST_OS_MAJORVERSION" != "x5.10"; then
361	# S11 without 'pkg'?? Something's wrong... bail.
362	errorprint "Solaris $HOST_OS_MAJORVERSION detected without executable $BIN_PKG !? I are confused."
363	exit 1
364	fi
365	HOST_OS_MAJORVERSION="10"
366	if test "$REMOTEINST" -eq 0; then
367	# Use uname to verify it's S10.
368	# Major version is S10, Minor version is no longer relevant (or used), use uname -v so it gets something
369	# like "Generic_blah" for purely cosmetic purposes
370	HOST_OS_MINORVERSION=`uname -v`
371	else
372	# Remote installs from S10 local.
373	BIN_PKGCHK=`which pkgchk 2> /dev/null`
374	if test ! -x "$BIN_PKGCHK"; then
375	errorprint "Failed to find an executable pkgchk binary $BIN_PKGCHK."
376	errorprint "Cannot determine Solaris version on remote target $PKG_INSTALL_ROOT"
377	exit 1
378	fi
379
380	REMOTE_S10=`$BIN_PKGCHK -l -p /kernel/amd64/genunix $BASEDIR_PKGOPT 2> /dev/null \| grep SUNWckr \| tr -d ' \t'`
381	if test ! -z "$REMOTE_S10" && test "x$REMOTE_S10" = "xSUNWckr"; then
382	HOST_OS_MAJORVERSION="10"
383	HOST_OS_MINORVERSION=""
384	else
385	errorprint "Remote target $PKG_INSTALL_ROOT is not Solaris 10."
386	errorprint "Will not attempt to install to an unidentified remote target."
387	exit 1
388	fi
389	fi
390	fi
391	}
392
393	# check_zone()
394	# !! failure is always fatal
395	check_zone()
396	{
397	currentzone=`zonename`
398	if test "x$currentzone" != "xglobal"; then
399	errorprint "This script must be run from the global zone."
400	exit 1
401	fi
402	}
403
404	# check_isa()
405	# !! failure is always fatal
406	check_isa()
407	{
408	currentisa=`uname -i`
409	if test "x$currentisa" = "xi86xpv"; then
410	errorprint "VirtualBox cannot run under xVM Dom0! Fatal Error, Aborting installation!"
411	exit 1
412	fi
413	}
414
415	# check_module_arch()
416	# !! failure is always fatal
417	check_module_arch()
418	{
419	cputype=`isainfo -k`
420	if test "x$cputype" != "xamd64" && test "x$cputype" != "xi386"; then
421	errorprint "VirtualBox works only on i386/amd64 hosts, not $cputype"
422	exit 1
423	fi
424	}
425
426	# update_boot_archive()
427	# cannot fail
428	update_boot_archive()
429	{
430	infoprint "Updating the boot archive..."
431	if test "$REMOTEINST" -eq 0; then
432	$BIN_BOOTADM update-archive > /dev/null
433	else
434	$BIN_BOOTADM update-archive -R "$PKG_INSTALL_ROOT" > /dev/null
435	fi
436	UPDATEBOOTARCHIVE=0
437	}
438
439
440	# module_added(modname)
441	# returns 1 if added, 0 otherwise
442	module_added()
443	{
444	if test -z "$1"; then
445	errorprint "missing argument to module_added()"
446	exit 1
447	fi
448
449	# Add a space at end of module name to make sure we have a perfect match to avoid
450	# any substring matches: e.g "vboxusb" & "vboxusbmon"
451	loadentry=`cat "$PKG_INSTALL_ROOT/etc/name_to_major" \| grep "$1 "`
452	if test -z "$loadentry"; then
453	return 1
454	fi
455	return 0
456	}
457
458	# module_loaded(modname)
459	# returns 1 if loaded, 0 otherwise
460	module_loaded()
461	{
462	if test -z "$1"; then
463	errorprint "missing argument to module_loaded()"
464	exit 1
465	fi
466
467	modname=$1
468	# modinfo should now work properly since we prevent module autounloading.
469	loadentry=`$BIN_MODINFO \| grep "$modname "`
470	if test -z "$loadentry"; then
471	return 1
472	fi
473	return 0
474	}
475
476	# add_driver(modname, moddesc, fatal, nulloutput, [driverperm])
477	# failure: depends on "fatal"
478	add_driver()
479	{
480	if test -z "$1" \|\| test -z "$2"; then
481	errorprint "missing argument to add_driver()"
482	exit 1
483	fi
484
485	modname="$1"
486	moddesc="$2"
487	fatal="$3"
488	nullop="$4"
489	modperm="$5"
490
491	if test -n "$modperm"; then
492	if test "x$nullop" = "x$NULLOP"; then
493	$BIN_ADDDRV $BASEDIR_OPT -m"$modperm" $modname >/dev/null 2>&1
494	else
495	$BIN_ADDDRV $BASEDIR_OPT -m"$modperm" $modname
496	fi
497	else
498	if test "x$nullop" = "x$NULLOP"; then
499	$BIN_ADDDRV $BASEDIR_OPT $modname >/dev/null 2>&1
500	else
501	$BIN_ADDDRV $BASEDIR_OPT $modname
502	fi
503	fi
504
505	if test "$?" -ne 0; then
506	subprint "Adding: $moddesc module ...FAILED!"
507	if test "x$fatal" = "x$FATALOP"; then
508	exit 1
509	fi
510	return 1
511	fi
512	subprint "Added: $moddesc driver"
513	return 0
514	}
515
516	# rem_driver(modname, moddesc, [fatal])
517	# failure: depends on [fatal]
518	rem_driver()
519	{
520	if test -z "$1" \|\| test -z "$2"; then
521	errorprint "missing argument to rem_driver()"
522	exit 1
523	fi
524
525	modname=$1
526	moddesc=$2
527	fatal=$3
528
529	module_added $modname
530	if test "$?" -eq 0; then
531	UPDATEBOOTARCHIVE=1
532	if test "x$ISIPS" != "x$IPSOP"; then
533	$BIN_REMDRV $BASEDIR_OPT $modname
534	else
535	$BIN_REMDRV $BASEDIR_OPT $modname >/dev/null 2>&1
536	fi
537	# for remote installs, don't bother with return values of rem_drv
538	if test "$?" -eq 0 \|\| test "$REMOTEINST" -eq 1; then
539	subprint "Removed: $moddesc driver"
540	return 0
541	else
542	subprint "Removing: $moddesc ...FAILED!"
543	if test "x$fatal" = "x$FATALOP"; then
544	exit 1
545	fi
546	return 1
547	fi
548	fi
549	}
550
551	# unload_module(modname, moddesc, retry, [fatal])
552	# failure: fatal
553	unload_module()
554	{
555	if test -z "$1" \|\| test -z "$2"; then
556	errorprint "missing argument to unload_module()"
557	exit 1
558	fi
559
560	# No-OP for non-root installs
561	if test "$REMOTEINST" -eq 1; then
562	return 0
563	fi
564
565	modname=$1
566	moddesc=$2
567	retry=$3
568	fatal=$4
569	modid=`$BIN_MODINFO \| grep "$modname " \| cut -f 1 -d ' ' `
570	if test -n "$modid"; then
571	$BIN_MODUNLOAD -i $modid
572	if test "$?" -eq 0; then
573	subprint "Unloaded: $moddesc module"
574	else
575	#
576	# Hack for vboxdrv. Delayed removing when VMM thread-context hooks are used.
577	# Our automated tests are probably too quick... Fix properly later.
578	#
579	result="$?"
580	if test "$retry" -eq 1; then
581	cmax=15
582	cslept=0
583	while test "$result" -ne 0;
584	do
585	subprint "Unloading: $moddesc module ...FAILED! Busy? Retrying in 3 seconds..."
586	sleep 3
587	cslept=`expr $cslept + 3`
588	if test "$cslept" -ge "$cmax"; then
589	break
590	fi
591	$BIN_MODUNLOAD -i $modid
592	result="$?"
593	done
594	fi
595
596	if test "$result" -ne 0; then
597	subprint "Unloading: $moddesc module ...FAILED!"
598	if test "x$fatal" = "x$FATALOP"; then
599	exit 1
600	fi
601	else
602	subprint "Unloaded: $moddesc module"
603	fi
604	return 1
605	fi
606	fi
607	return 0
608	}
609
610	# load_module(modname, moddesc, [fatal])
611	# pass "drv/modname" or "misc/vbi" etc.
612	# failure: fatal
613	load_module()
614	{
615	if test -z "$1" \|\| test -z "$2"; then
616	errorprint "missing argument to load_module()"
617	exit 1
618	fi
619
620	# No-OP for non-root installs
621	if test "$REMOTEINST" -eq 1; then
622	return 0
623	fi
624
625	modname=$1
626	moddesc=$2
627	fatal=$3
628	$BIN_MODLOAD -p $modname
629	if test "$?" -eq 0; then
630	return 0
631	else
632	subprint "Loading: $moddesc module ...FAILED!"
633	if test "x$fatal" = "x$FATALOP"; then
634	exit 1
635	fi
636	return 1
637	fi
638	}
639
640	load_vboxflt()
641	{
642	if test -f "$DIR_CONF/vboxflt.conf"; then
643	add_driver "$MOD_VBOXFLT" "$DESC_VBOXFLT" "$FATALOP"
644	load_module "drv/$MOD_VBOXFLT" "$DESC_VBOXFLT" "$FATALOP"
645	else
646	# For custom pkgs that optionally ship this module, let's not fail but just warn
647	warnprint "$DESC_VBOXFLT installation requested but not shipped in this package."
648	fi
649	}
650
651	load_vboxbow()
652	{
653	if test -f "$DIR_CONF/vboxbow.conf"; then
654	add_driver "$MOD_VBOXBOW" "$DESC_VBOXBOW" "$FATALOP"
655	load_module "drv/$MOD_VBOXBOW" "$DESC_VBOXBOW" "$FATALOP"
656	else
657	# For custom pkgs that optionally ship this module, let's not fail but just warn
658	warnprint "$DESC_VBOXBOW installation requested but not shipped in this package."
659	fi
660	}
661
662	# install_drivers()
663	# !! failure is always fatal
664	install_drivers()
665	{
666	if test -f "$DIR_CONF/vboxdrv.conf"; then
667	if test -n "_HARDENED_"; then
668	add_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP" "not-$NULLOP" "'* 0600 root sys','vboxdrvu 0666 root sys'"
669	else
670	add_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP" "not-$NULLOP" "'* 0666 root sys','vboxdrvu 0666 root sys'"
671	fi
672	load_module "drv/$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP"
673	else
674	errorprint "Extreme error! Missing $DIR_CONF/vboxdrv.conf, aborting."
675	return 1
676	fi
677
678	# Figure out group to use for /etc/devlink.tab (before Solaris 11 SRU6
679	# it was always using group sys)
680	group=sys
681	if [ -f "$PKG_INSTALL_ROOT/etc/dev/reserved_devnames" ]; then
682	# Solaris 11 SRU6 and later use group root (check a file which isn't
683	# tainted by VirtualBox install scripts and allow no other group)
684	refgroup=`LC_ALL=C /usr/bin/ls -lL "$PKG_INSTALL_ROOT/etc/dev/reserved_devnames" \| awk '{ print $4 }' 2>/dev/null`
685	if [ $? -eq 0 -a "x$refgroup" = "xroot" ]; then
686	group=root
687	fi
688	unset refgroup
689	fi
690
691	## Add vboxdrv to devlink.tab (KEEP TABS!)
692	if test -f "$PKG_INSTALL_ROOT/etc/devlink.tab"; then
693	sed -e '/name=vboxdrv/d' -e '/name=vboxdrvu/d' "$PKG_INSTALL_ROOT/etc/devlink.tab" > "$PKG_INSTALL_ROOT/etc/devlink.vbox"
694	echo "type=ddi_pseudo;name=vboxdrv;minor=vboxdrv \D" >> "$PKG_INSTALL_ROOT/etc/devlink.vbox"
695	echo "type=ddi_pseudo;name=vboxdrv;minor=vboxdrvu \M0" >> "$PKG_INSTALL_ROOT/etc/devlink.vbox"
696	chmod 0644 "$PKG_INSTALL_ROOT/etc/devlink.vbox"
697	chown root:$group "$PKG_INSTALL_ROOT/etc/devlink.vbox"
698	mv -f "$PKG_INSTALL_ROOT/etc/devlink.vbox" "$PKG_INSTALL_ROOT/etc/devlink.tab"
699	else
700	errorprint "Missing $PKG_INSTALL_ROOT/etc/devlink.tab, aborting install"
701	return 1
702	fi
703
704	# Create the device link for non-remote installs (not really relevant any more)
705	if test "$REMOTEINST" -eq 0; then
706	/usr/sbin/devfsadm -i "$MOD_VBOXDRV"
707	if test "$?" -ne 0 \|\| test ! -h "/dev/vboxdrv" \|\| test ! -h "/dev/vboxdrvu" ; then
708	errorprint "Failed to create device link for $MOD_VBOXDRV."
709	exit 1
710	fi
711	fi
712
713	# Load VBoxNetAdp
714	if test -f "$DIR_CONF/vboxnet.conf"; then
715	add_driver "$MOD_VBOXNET" "$DESC_VBOXNET" "$FATALOP"
716	load_module "drv/$MOD_VBOXNET" "$DESC_VBOXNET" "$FATALOP"
717	fi
718
719	# If both vboxinst_vboxbow and vboxinst_vboxflt exist, bail.
720	if test -f "$PKG_INSTALL_ROOT/etc/vboxinst_vboxflt" && test -f "$PKG_INSTALL_ROOT/etc/vboxinst_vboxbow"; then
721	errorprint "Force-install files '$PKG_INSTALL_ROOT/etc/vboxinst_vboxflt' and '$PKG_INSTALL_ROOT/etc/vboxinst_vboxbow' both exist."
722	errorprint "Cannot load $DESC_VBOXFLT and $DESC_VBOXBOW drivers at the same time."
723	return 1
724	fi
725
726	# If the force-install files exists, install blindly
727	if test -f "$PKG_INSTALL_ROOT/etc/vboxinst_vboxflt"; then
728	subprint "Detected: Force-load file $PKG_INSTALL_ROOT/etc/vboxinst_vboxflt."
729	load_vboxflt
730	elif test -f "$PKG_INSTALL_ROOT/etc/vboxinst_vboxbow"; then
731	subprint "Detected: Force-load file $PKG_INSTALL_ROOT/etc/vboxinst_vboxbow."
732	load_vboxbow
733	else
734	# If host is S10 or S11 (< snv_159) or vboxbow isn't shipped, then load vboxflt
735	if test "$HOST_OS_MAJORVERSION" -eq 10 \
736	\|\| (test "$HOST_OS_MAJORVERSION" -eq 11 && test "$HOST_OS_MINORVERSION" -lt 159) \
737	\|\| test ! -f "$DIR_CONF/vboxbow.conf"; then
738	load_vboxflt
739	else
740	# For S11 snv_159+ load vboxbow
741	load_vboxbow
742	fi
743	fi
744
745	# Load VBoxUSBMon, VBoxUSB
746	try_vboxusb="no"
747	if test -f "$DIR_CONF/vboxusbmon.conf"; then
748	if test -f "$PKG_INSTALL_ROOT/etc/vboxinst_vboxusb"; then
749	subprint "Detected: Force-load file $PKG_INSTALL_ROOT/etc/vboxinst_vboxusb."
750	try_vboxusb="yes"
751	else
752	# For VirtualBox 3.1 the new USB code requires Nevada > 123 i.e. S12+ or S11 b124+
753	if test "$HOST_OS_MAJORVERSION" -gt 11 \
754	\|\| (test "$HOST_OS_MAJORVERSION" -eq 11 && test "$HOST_OS_MINORVERSION" -gt 123); then
755	try_vboxusb="yes"
756	else
757	warnprint "Solaris 11 build 124 or higher required for USB support. Skipped installing USB support."
758	fi
759	fi
760	fi
761	if test "x$try_vboxusb" = "xyes"; then
762	# Add a group "vboxuser" (8-character limit) for USB access.
763	# All users which need host USB-passthrough support will have to be added to this group.
764	groupadd vboxuser >/dev/null 2>&1
765
766	add_driver "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$FATALOP" "not-$NULLOP" "'* 0666 root sys'"
767	load_module "drv/$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$FATALOP"
768
769	chown root:vboxuser "/devices/pseudo/vboxusbmon@0:vboxusbmon"
770
771	# Add vboxusbmon to devlink.tab
772	sed -e '/name=vboxusbmon/d' "$PKG_INSTALL_ROOT/etc/devlink.tab" > "$PKG_INSTALL_ROOT/etc/devlink.vbox"
773	echo "type=ddi_pseudo;name=vboxusbmon \D" >> "$PKG_INSTALL_ROOT/etc/devlink.vbox"
774	chmod 0644 "$PKG_INSTALL_ROOT/etc/devlink.vbox"
775	chown root:$group "$PKG_INSTALL_ROOT/etc/devlink.vbox"
776	mv -f "$PKG_INSTALL_ROOT/etc/devlink.vbox" "$PKG_INSTALL_ROOT/etc/devlink.tab"
777
778	# Create the device link for non-remote installs
779	if test "$REMOTEINST" -eq 0; then
780	/usr/sbin/devfsadm -i "$MOD_VBOXUSBMON"
781	if test "$?" -ne 0; then
782	errorprint "Failed to create device link for $MOD_VBOXUSBMON."
783	exit 1
784	fi
785	fi
786
787	# Add vboxusb if present
788	# This driver is special, we need it in the boot-archive but since there is no
789	# USB device to attach to now (it's done at runtime) it will fail to attach so
790	# redirect attaching failure output to /dev/null
791	if test -f "$DIR_CONF/vboxusb.conf"; then
792	add_driver "$MOD_VBOXUSB" "$DESC_VBOXUSB" "$FATALOP" "$NULLOP"
793	load_module "drv/$MOD_VBOXUSB" "$DESC_VBOXUSB" "$FATALOP"
794	fi
795	fi
796
797	return $?
798	}
799
800	# remove_drivers([fatal])
801	# failure: depends on [fatal]
802	remove_drivers()
803	{
804	fatal=$1
805
806	# Figure out group to use for /etc/devlink.tab (before Solaris 11 SRU6
807	# it was always using group sys)
808	group=sys
809	if [ -f "$PKG_INSTALL_ROOT/etc/dev/reserved_devnames" ]; then
810	# Solaris 11 SRU6 and later use group root (check a file which isn't
811	# tainted by VirtualBox install scripts and allow no other group)
812	refgroup=`LC_ALL=C /usr/bin/ls -lL "$PKG_INSTALL_ROOT/etc/dev/reserved_devnames" \| awk '{ print $4 }' 2>/dev/null`
813	if [ $? -eq 0 -a "x$refgroup" = "xroot" ]; then
814	group=root
815	fi
816	unset refgroup
817	fi
818
819	# Remove vboxdrv[u] from devlink.tab
820	if test -f "$PKG_INSTALL_ROOT/etc/devlink.tab"; then
821	devlinkfound=`cat "$PKG_INSTALL_ROOT/etc/devlink.tab" \| grep vboxdrv`
822	if test -n "$devlinkfound"; then
823	sed -e '/name=vboxdrv/d' -e '/name=vboxdrvu/d' "$PKG_INSTALL_ROOT/etc/devlink.tab" > "$PKG_INSTALL_ROOT/etc/devlink.vbox"
824	chmod 0644 "$PKG_INSTALL_ROOT/etc/devlink.vbox"
825	chown root:$group "$PKG_INSTALL_ROOT/etc/devlink.vbox"
826	mv -f "$PKG_INSTALL_ROOT/etc/devlink.vbox" "$PKG_INSTALL_ROOT/etc/devlink.tab"
827	fi
828
829	# Remove vboxusbmon from devlink.tab
830	devlinkfound=`cat "$PKG_INSTALL_ROOT/etc/devlink.tab" \| grep vboxusbmon`
831	if test -n "$devlinkfound"; then
832	sed -e '/name=vboxusbmon/d' "$PKG_INSTALL_ROOT/etc/devlink.tab" > "$PKG_INSTALL_ROOT/etc/devlink.vbox"
833	chmod 0644 "$PKG_INSTALL_ROOT/etc/devlink.vbox"
834	chown root:$group "$PKG_INSTALL_ROOT/etc/devlink.vbox"
835	mv -f "$PKG_INSTALL_ROOT/etc/devlink.vbox" "$PKG_INSTALL_ROOT/etc/devlink.tab"
836	fi
837	fi
838
839	unload_module "$MOD_VBOXUSB" "$DESC_VBOXUSB" 0 "$fatal"
840	rem_driver "$MOD_VBOXUSB" "$DESC_VBOXUSB" "$fatal"
841
842	unload_module "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" 0 "$fatal"
843	rem_driver "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$fatal"
844
845	unload_module "$MOD_VBOXFLT" "$DESC_VBOXFLT" 0 "$fatal"
846	rem_driver "$MOD_VBOXFLT" "$DESC_VBOXFLT" "$fatal"
847
848	unload_module "$MOD_VBOXBOW" "$DESC_VBOXBOW" 0 "$fatal"
849	rem_driver "$MOD_VBOXBOW" "$DESC_VBOXBOW" "$fatal"
850
851	unload_module "$MOD_VBOXNET" "$DESC_VBOXNET" 0 "$fatal"
852	rem_driver "$MOD_VBOXNET" "$DESC_VBOXNET" "$fatal"
853
854	unload_module "$MOD_VBOXDRV" "$DESC_VBOXDRV" 1 "$fatal"
855	rem_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$fatal"
856
857	# remove devlinks
858	if test -h "$PKG_INSTALL_ROOT/dev/vboxdrv" \|\| test -f "$PKG_INSTALL_ROOT/dev/vboxdrv"; then
859	rm -f "$PKG_INSTALL_ROOT/dev/vboxdrv"
860	fi
861	if test -h "$PKG_INSTALL_ROOT/dev/vboxdrvu" \|\| test -f "$PKG_INSTALL_ROOT/dev/vboxdrvu"; then
862	rm -f "$PKG_INSTALL_ROOT/dev/vboxdrvu"
863	fi
864	if test -h "$PKG_INSTALL_ROOT/dev/vboxusbmon" \|\| test -f "$PKG_INSTALL_ROOT/dev/vboxusbmon"; then
865	rm -f "$PKG_INSTALL_ROOT/dev/vboxusbmon"
866	fi
867
868	# unpatch nwam/dhcpagent fix
869	nwamfile="$PKG_INSTALL_ROOT/etc/nwam/llp"
870	nwambackupfile=$nwamfile.vbox
871	if test -f "$nwamfile"; then
872	sed -e '/vboxnet/d' $nwamfile > $nwambackupfile
873	mv -f $nwambackupfile $nwamfile
874	fi
875
876	# remove netmask configuration
877	if test -h "$PKG_INSTALL_ROOT/etc/netmasks"; then
878	nmaskfile="$PKG_INSTALL_ROOT/etc/inet/netmasks"
879	else
880	nmaskfile="$PKG_INSTALL_ROOT/etc/netmasks"
881	fi
882	nmaskbackupfile=$nmaskfile.vbox
883	if test -f "$nmaskfile"; then
884	sed -e '/#VirtualBox_SectionStart/,/#VirtualBox_SectionEnd/d' $nmaskfile > $nmaskbackupfile
885	mv -f $nmaskbackupfile $nmaskfile
886	fi
887
888	if test $UPDATEBOOTARCHIVE -eq 1; then
889	update_boot_archive
890	fi
891
892	return 0
893	}
894
895	# install_python_bindings(pythonbin pythondesc)
896	# failure: non fatal
897	install_python_bindings()
898	{
899	pythonbin="$1"
900	pythondesc="$2"
901
902	# The python binary might not be there, so just exit silently
903	if test -z "$pythonbin"; then
904	return 0
905	fi
906
907	if test -z "$pythondesc"; then
908	errorprint "missing argument to install_python_bindings"
909	return 1
910	fi
911
912	infoprint "Python found: $pythonbin, installing bindings..."
913
914	# check if python has working distutils
915	"$pythonbin" -c "from distutils.core import setup" > /dev/null 2>&1
916	if test "$?" -ne 0; then
917	subprint "Skipped: $pythondesc install is unusable, missing package 'distutils'"
918	return 0
919	fi
920
921	# Pass install path via environment
922	export VBOX_INSTALL_PATH
923	mkdir -p "$CONFIG_DIR"
924	rm -f "$CONFIG_DIR/python-$CONFIG_FILES"
925	$SHELL -c "cd \"$VBOX_INSTALL_PATH\"/sdk/installer && \"$pythonbin\" ./vboxapisetup.py install \
926	--record \"$CONFIG_DIR/python-$CONFIG_FILES\"" > /dev/null 2>&1
927	if test "$?" -eq 0; then
928	cat "$CONFIG_DIR/python-$CONFIG_FILES" >> "$CONFIG_DIR/$CONFIG_FILES"
929	else
930	errorprint "Failed to install bindings for $pythondesc"
931	fi
932	rm "$CONFIG_DIR/python-$CONFIG_FILES"
933
934	# Remove files created by Python API setup.
935	rm -rf $VBOX_INSTALL_PATH/sdk/installer/build
936	return 0
937	}
938
939	# is_process_running(processname)
940	# returns 1 if the process is running, 0 otherwise
941	is_process_running()
942	{
943	if test -z "$1"; then
944	errorprint "missing argument to is_process_running()"
945	exit 1
946	fi
947
948	procname="$1"
949	$BIN_PGREP "$procname" > /dev/null 2>&1
950	if test "$?" -eq 0; then
951	return 1
952	fi
953	return 0
954	}
955
956
957	# stop_process(processname)
958	# failure: depends on [fatal]
959	stop_process()
960	{
961	if test -z "$1"; then
962	errorprint "missing argument to stop_process()"
963	exit 1
964	fi
965
966	procname="$1"
967	is_process_running "$procname"
968	if test "$?" -eq 1; then
969	$BIN_PKILL "$procname"
970	sleep 2
971	is_process_running "$procname"
972	if test "$?" -eq 1; then
973	subprint "Terminating: $procname ...FAILED!"
974	if test "x$fatal" = "x$FATALOP"; then
975	exit 1
976	fi
977	else
978	subprint "Terminated: $procname"
979	fi
980	fi
981	}
982
983	# start_service(servicename, shortFMRI pretty printing, full FMRI, log-file path)
984	# failure: non-fatal
985	start_service()
986	{
987	if test -z "$1" \|\| test -z "$2" \|\| test -z "$3" \|\| test -z "$4"; then
988	errorprint "missing argument to enable_service()"
989	exit 1
990	fi
991
992	# Since S11 the way to import a manifest is via restarting manifest-import which is asynchronous and can
993	# take a while to complete, using disable/enable -s doesn't work either. So we restart it, and poll in
994	# 1 second intervals to see if our service has been successfully imported and timeout after 'cmax' seconds.
995	cmax=32
996	cslept=0
997	success=0
998
999	$BIN_SVCS "$3" >/dev/null 2>&1
1000	while test "$?" -ne 0;
1001	do
1002	sleep 1
1003	cslept=`expr $cslept + 1`
1004	if test "$cslept" -eq "$cmax"; then
1005	success=1
1006	break
1007	fi
1008	$BIN_SVCS "$3" >/dev/null 2>&1
1009	done
1010	if test "$success" -eq 0; then
1011	$BIN_SVCADM enable -s "$3"
1012	if test "$?" -eq 0; then
1013	subprint "Enabled: $1"
1014	return 0
1015	else
1016	warnprint "Enabling $1 ...FAILED."
1017	warnprint "Refer $4 for details."
1018	fi
1019	else
1020	warnprint "Importing $1 ...FAILED."
1021	warnprint "Refer /var/svc/log/system-manifest-import:default.log for details."
1022	fi
1023	return 1
1024	}
1025
1026
1027	# stop_service(servicename, shortFMRI-suitable for grep, full FMRI)
1028	# failure: non fatal
1029	stop_service()
1030	{
1031	if test -z "$1" \|\| test -z "$2" \|\| test -z "$3"; then
1032	errorprint "missing argument to stop_service()"
1033	exit 1
1034	fi
1035	servicefound=`$BIN_SVCS -H "$2" 2>/dev/null \| grep '^online'`
1036	if test ! -z "$servicefound"; then
1037	$BIN_SVCADM disable -s "$3"
1038	# Don't delete the manifest, this is handled by the manifest class action
1039	# $BIN_SVCCFG delete "$3"
1040	if test "$?" -eq 0; then
1041	subprint "Disabled: $1"
1042	else
1043	subprint "Disabling: $1 ...ERROR(S)."
1044	fi
1045	fi
1046	}
1047
1048
1049	# plumb vboxnet0 instance
1050	# failure: non fatal
1051	plumb_net()
1052	{
1053	# S11 175a renames vboxnet0 as 'netX', undo this and rename it back (Solaris 12, Solaris 11.4 or newer)
1054	if test "$HOST_OS_MAJORVERSION" -ge 12 \|\| (test "$HOST_OS_MAJORVERSION" -eq 11 && test "$HOST_OS_MINORVERSION" -ge 175); then
1055	vanityname=`dladm show-phys -po link,device \| grep vboxnet0 \| cut -f1 -d':'`
1056	if test "$?" -eq 0 && test ! -z "$vanityname" && test "x$vanityname" != "xvboxnet0"; then
1057	dladm rename-link "$vanityname" vboxnet0
1058	if test "$?" -ne 0; then
1059	errorprint "Failed to rename vanity interface ($vanityname) to vboxnet0"
1060	fi
1061	fi
1062	fi
1063
1064	# use ipadm for Solaris 12, Solaris 11.5 or newer
1065	if test "$HOST_OS_MAJORVERSION" -ge 12 \|\| (test "$HOST_OS_MAJORVERSION" -eq 11 && test "$HOST_OS_MINORVERSION" -ge 176); then
1066	$BIN_IPADM create-ip vboxnet0
1067	if test "$?" -eq 0; then
1068	$BIN_IPADM create-addr -T static -a local="192.168.56.1/24" "vboxnet0/v4addr"
1069	if test "$?" -eq 0; then
1070	subprint "Configured: NetAdapter 'vboxnet0'"
1071	else
1072	warnprint "Failed to create local address for vboxnet0!"
1073	fi
1074	else
1075	warnprint "Failed to create IP instance for vboxnet0!"
1076	fi
1077	else
1078	$BIN_IFCONFIG vboxnet0 plumb
1079	$BIN_IFCONFIG vboxnet0 up
1080	if test "$?" -eq 0; then
1081	$BIN_IFCONFIG vboxnet0 192.168.56.1 netmask 255.255.255.0 up
1082
1083	# /etc/netmasks is a symlink, older installers replaced this with
1084	# a copy of the actual file, repair that behaviour here.
1085	recreatelink=0
1086	if test -h "$PKG_INSTALL_ROOT/etc/netmasks"; then
1087	nmaskfile="$PKG_INSTALL_ROOT/etc/inet/netmasks"
1088	else
1089	nmaskfile="$PKG_INSTALL_ROOT/etc/netmasks"
1090	recreatelink=1
1091	fi
1092
1093	# add the netmask to stay persistent across host reboots
1094	nmaskbackupfile=$nmaskfile.vbox
1095	if test -f $nmaskfile; then
1096	sed -e '/#VirtualBox_SectionStart/,/#VirtualBox_SectionEnd/d' $nmaskfile > $nmaskbackupfile
1097
1098	if test "$recreatelink" -eq 1; then
1099	# Check after removing our settings if /etc/netmasks is identifcal to /etc/inet/netmasks
1100	anydiff=`diff $nmaskbackupfile "$PKG_INSTALL_ROOT/etc/inet/netmasks"`
1101	if test ! -z "$anydiff"; then
1102	# User may have some custom settings in /etc/netmasks, don't overwrite /etc/netmasks!
1103	recreatelink=2
1104	fi
1105	fi
1106
1107	echo "#VirtualBox_SectionStart" >> $nmaskbackupfile
1108	inst=0
1109	networkn=56
1110	while test "$inst" -ne 1; do
1111	echo "192.168.$networkn.0 255.255.255.0" >> $nmaskbackupfile
1112	inst=`expr $inst + 1`
1113	networkn=`expr $networkn + 1`
1114	done
1115	echo "#VirtualBox_SectionEnd" >> $nmaskbackupfile
1116	mv -f $nmaskbackupfile $nmaskfile
1117
1118	# Recreate /etc/netmasks as a link if necessary
1119	if test "$recreatelink" -eq 1; then
1120	cp -f "$PKG_INSTALL_ROOT/etc/netmasks" "$PKG_INSTALL_ROOT/etc/inet/netmasks"
1121	ln -sf ./inet/netmasks "$PKG_INSTALL_ROOT/etc/netmasks"
1122	elif test "$recreatelink" -eq 2; then
1123	warnprint "/etc/netmasks is a symlink (to /etc/inet/netmasks) that older"
1124	warnprint "VirtualBox installers incorrectly overwrote. Now the contents"
1125	warnprint "of /etc/netmasks and /etc/inet/netmasks differ, therefore "
1126	warnprint "VirtualBox will not attempt to overwrite /etc/netmasks as a"
1127	warnprint "symlink to /etc/inet/netmasks. Please resolve this manually"
1128	warnprint "by updating /etc/inet/netmasks and creating /etc/netmasks as a"
1129	warnprint "symlink to /etc/inet/netmasks"
1130	fi
1131	fi
1132	else
1133	# Should this be fatal?
1134	warnprint "Failed to bring up vboxnet0!"
1135	fi
1136	fi
1137	}
1138
1139
1140	# unplumb all vboxnet instances
1141	# failure: fatal
1142	unplumb_net()
1143	{
1144	inst=0
1145	# use ipadm for Solaris 12, Solaris 11.5 or newer
1146	if test "$HOST_OS_MAJORVERSION" -ge 12 \|\| (test "$HOST_OS_MAJORVERSION" -eq 11 && test "$HOST_OS_MINORVERSION" -ge 176); then
1147	while test "$inst" -ne $MOD_VBOXNET_INST; do
1148	vboxnetup=`$BIN_IPADM show-addr -p -o addrobj vboxnet$inst >/dev/null 2>&1`
1149	if test "$?" -eq 0; then
1150	$BIN_IPADM delete-addr vboxnet$inst/v4addr
1151	$BIN_IPADM delete-ip vboxnet$inst
1152	if test "$?" -ne 0; then
1153	errorprint "VirtualBox NetAdapter 'vboxnet$inst' couldn't be removed (probably in use)."
1154	if test "x$fatal" = "x$FATALOP"; then
1155	exit 1
1156	fi
1157	fi
1158	fi
1159
1160	inst=`expr $inst + 1`
1161	done
1162	else
1163	inst=0
1164	while test "$inst" -ne $MOD_VBOXNET_INST; do
1165	vboxnetup=`$BIN_IFCONFIG vboxnet$inst >/dev/null 2>&1`
1166	if test "$?" -eq 0; then
1167	$BIN_IFCONFIG vboxnet$inst unplumb
1168	if test "$?" -ne 0; then
1169	errorprint "VirtualBox NetAdapter 'vboxnet$inst' couldn't be unplumbed (probably in use)."
1170	if test "x$fatal" = "x$FATALOP"; then
1171	exit 1
1172	fi
1173	fi
1174	fi
1175
1176	# unplumb vboxnet0 ipv6
1177	vboxnetup=`$BIN_IFCONFIG vboxnet$inst inet6 >/dev/null 2>&1`
1178	if test "$?" -eq 0; then
1179	$BIN_IFCONFIG vboxnet$inst inet6 unplumb
1180	if test "$?" -ne 0; then
1181	errorprint "VirtualBox NetAdapter 'vboxnet$inst' IPv6 couldn't be unplumbed (probably in use)."
1182	if test "x$fatal" = "x$FATALOP"; then
1183	exit 1
1184	fi
1185	fi
1186	fi
1187
1188	inst=`expr $inst + 1`
1189	done
1190	fi
1191	}
1192
1193
1194	# cleanup_install([fatal])
1195	# failure: depends on [fatal]
1196	cleanup_install()
1197	{
1198	fatal=$1
1199
1200	# No-Op for remote installs
1201	if test "$REMOTEINST" -eq 1; then
1202	return 0
1203	fi
1204
1205	# stop the services
1206	stop_service "Web service" "virtualbox/webservice" "svc:/application/virtualbox/webservice:default"
1207	stop_service "Balloon control service" "virtualbox/balloonctrl" "svc:/application/virtualbox/balloonctrl:default"
1208	stop_service "Autostart service" "virtualbox/autostart" "svc:/application/virtualbox/autostart:default"
1209	stop_service "Zone access service" "virtualbox/zoneaccess" "svc:/application/virtualbox/zoneaccess:default"
1210
1211	# DEBUG x4600b: verify that the ZoneAccess process is really gone
1212	is_process_running "VBoxZoneAccess"
1213	if test "$?" -eq 1; then
1214	warnprint "VBoxZoneAccess is alive despite its service being dead. Killing..."
1215	stop_process "VBoxZoneAccess"
1216	fi
1217
1218	# unplumb all vboxnet instances for non-remote installs
1219	unplumb_net
1220
1221	# Stop our other daemons, non-fatal
1222	stop_process "VBoxNetDHCP"
1223	stop_process "VBoxNetNAT"
1224
1225	# Stop VBoxSVC quickly using SIGUSR1
1226	procname="VBoxSVC"
1227	procpid=`ps -eo pid,fname \| grep $procname \| grep -v grep \| awk '{ print $1 }'`
1228	if test ! -z "$procpid" && test "$procpid" -ge 0; then
1229	kill -USR1 $procpid
1230
1231	# Sleep a while and check if VBoxSVC is still running, if so fail uninstallation.
1232	sleep 2
1233	is_process_running "VBoxSVC"
1234	if test "$?" -eq 1; then
1235	errorprint "Cannot uninstall VirtualBox while VBoxSVC (pid $procpid) is still running."
1236	errorprint "Please shutdown all VMs and VirtualBox frontends before uninstalling VirtualBox."
1237	exit 1
1238	fi
1239
1240	# Some VMs might still be alive after VBoxSVC as they poll less frequently before killing themselves
1241	# Just check for VBoxHeadless & VirtualBox frontends for now.
1242	is_process_running "VBoxHeadless"
1243	if test "$?" -eq 1; then
1244	errorprint "Cannot uninstall VirtualBox while VBoxHeadless is still running."
1245	errorprint "Please shutdown all VMs and VirtualBox frontends before uninstalling VirtualBox."
1246	exit 1
1247	fi
1248
1249	is_process_running "VirtualBox"
1250	if test "$?" -eq 1; then
1251	errorprint "Cannot uninstall VirtualBox while any VM is still running."
1252	errorprint "Please shutdown all VMs and VirtualBox frontends before uninstalling VirtualBox."
1253	exit 1
1254	fi
1255	fi
1256
1257	# Remove stuff installed for the Python bindings.
1258	if [ -r "$CONFIG_DIR/$CONFIG_FILES" ]; then
1259	rm -f `cat "$CONFIG_DIR/$CONFIG_FILES"` 2> /dev/null
1260	rm -f "$CONFIG_DIR/$CONFIG_FILES" 2> /dev/null
1261	rmdir "$CONFIG_DIR" 2> /dev/null
1262	fi
1263	}
1264
1265
1266	# postinstall()
1267	# !! failure is always fatal
1268	postinstall()
1269	{
1270	infoprint "Detected Solaris $HOST_OS_MAJORVERSION Version $HOST_OS_MINORVERSION"
1271
1272	infoprint "Loading VirtualBox kernel modules..."
1273	install_drivers
1274
1275	if test "$?" -eq 0; then
1276	if test -f "$DIR_CONF/vboxnet.conf"; then
1277	# nwam/dhcpagent fix
1278	nwamfile="$PKG_INSTALL_ROOT/etc/nwam/llp"
1279	nwambackupfile=$nwamfile.vbox
1280	if test -f "$nwamfile"; then
1281	sed -e '/vboxnet/d' $nwamfile > $nwambackupfile
1282
1283	# add all vboxnet instances as static to nwam
1284	inst=0
1285	networkn=56
1286	while test "$inst" -ne 1; do
1287	echo "vboxnet$inst static 192.168.$networkn.1" >> $nwambackupfile
1288	inst=`expr $inst + 1`
1289	networkn=`expr $networkn + 1`
1290	done
1291	mv -f $nwambackupfile $nwamfile
1292	fi
1293
1294	# plumb and configure vboxnet0 for non-remote installs
1295	if test "$REMOTEINST" -eq 0; then
1296	plumb_net
1297	fi
1298	fi
1299
1300	if test -f "$PKG_INSTALL_ROOT/var/svc/manifest/application/virtualbox/virtualbox-webservice.xml" \
1301	\|\| test -f "$PKG_INSTALL_ROOT/var/svc/manifest/application/virtualbox/virtualbox-zoneaccess.xml" \
1302	\|\| test -f "$PKG_INSTALL_ROOT/var/svc/manifest/application/virtualbox/virtualbox-balloonctrl.xml"\
1303	\|\| test -f "$PKG_INSTALL_ROOT/var/svc/manifest/application/virtualbox/virtualbox-autostart.xml"; then
1304	infoprint "Configuring services..."
1305	if test "$REMOTEINST" -eq 1; then
1306	subprint "Skipped for targeted installs."
1307	else
1308	# Since S11 the way to import a manifest is via restarting manifest-import which is asynchronous and can
1309	# take a while to complete, using disable/enable -s doesn't work either. So we restart it, and poll in
1310	# 1 second intervals to see if our service has been successfully imported and timeout after 'cmax' seconds.
1311	$BIN_SVCADM restart svc:system/manifest-import:default
1312
1313	# Start ZoneAccess service, other services are disabled by default.
1314	start_service "Zone access service" "virtualbox/zoneaccess" "svc:/application/virtualbox/zoneaccess:default" \
1315	"/var/svc/log/application-virtualbox-zoneaccess:default.log"
1316	fi
1317	fi
1318
1319	# Update mime and desktop databases to get the right menu entries
1320	# and icons. There is still some delay until the GUI picks it up,
1321	# but that cannot be helped.
1322	if test -d "$PKG_INSTALL_ROOT/usr/share/icons"; then
1323	infoprint "Installing MIME types and icons..."
1324	if test "$REMOTEINST" -eq 0; then
1325	/usr/bin/update-mime-database /usr/share/mime >/dev/null 2>&1
1326	/usr/bin/update-desktop-database -q 2>/dev/null
1327	else
1328	subprint "Skipped for targeted installs."
1329	fi
1330	fi
1331
1332	if test -f "$VBOX_INSTALL_PATH/sdk/installer/vboxapisetup.py" \|\| test -h "$VBOX_INSTALL_PATH/sdk/installer/vboxapisetup.py"; then
1333	# Install python bindings for non-remote installs
1334	if test "$REMOTEINST" -eq 0; then
1335	infoprint "Installing Python bindings..."
1336
1337	# Loop over all usual suspect Python executable names and try
1338	# installing the VirtualBox API bindings. Needs to prevent
1339	# double installs which waste quite a bit of time.
1340	PYTHONS=""
1341	for p in python2.4 python2.5 python2.6 python2.7 python2 python3.3 python3.4 python3.5 python3.6 python3.7 python3.8 python3.9 python3.10 python3 python; do
1342	if [ "`$p -c 'import sys
1343	if sys.version_info >= (2, 4) and (sys.version_info < (3, 0) or sys.version_info >= (3, 3)):
1344	print(\"test\")' 2> /dev/null`" != "test" ]; then
1345	continue
1346	fi
1347	# Get python major/minor version, and skip if it was
1348	# already covered. Uses grep -F to avoid trouble with '.'
1349	# matching any char.
1350	pyvers="`$p -c 'import sys
1351	print("%s.%s" % (sys.version_info[0], sys.version_info[1]))' 2> /dev/null`"
1352	if echo "$PYTHONS" \| /usr/xpg4/bin/grep -Fq ":$pyvers:"; then
1353	continue
1354	fi
1355	# Record which version will be installed. If it fails there
1356	# is no point trying with different executable/symlink
1357	# reporting the same version.
1358	PYTHONS="$PYTHONS:$pyvers:"
1359	install_python_bindings "$p" "Python $pyvers"
1360	done
1361	if [ -z "$PYTHONS" ]; then
1362	warnprint "Python (2.4 to 2.7 or 3.3 and later) unavailable, skipping bindings installation."
1363	fi
1364	else
1365	warnprint "Skipped installing Python bindings. Run, as root, 'vboxapisetup.py install' manually from the booted system."
1366	fi
1367	fi
1368
1369	update_boot_archive
1370
1371	return 0
1372	else
1373	errorprint "Failed to install drivers"
1374	exit 666
1375	fi
1376	return 1
1377	}
1378
1379	# preremove([fatal])
1380	# failure: depends on [fatal]
1381	preremove()
1382	{
1383	fatal=$1
1384
1385	cleanup_install "$fatal"
1386
1387	remove_drivers "$fatal"
1388	if test "$?" -eq 0; then
1389	return 0;
1390	fi
1391	return 1
1392	}
1393
1394
1395	# And it begins...
1396	if test "x${PKG_INSTALL_ROOT:=/}" != "x/"; then
1397	BASEDIR_OPT="-b $PKG_INSTALL_ROOT"
1398	BASEDIR_PKGOPT="-R $PKG_INSTALL_ROOT"
1399	REMOTEINST=1
1400	fi
1401	find_bins
1402	check_root
1403	check_isa
1404	check_zone
1405	get_sysinfo
1406
1407
1408	# Get command line options
1409	while test $# -gt 0;
1410	do
1411	case "$1" in
1412	--postinstall \| --preremove \| --installdrivers \| --removedrivers \| --setupdrivers)
1413	drvop="$1"
1414	;;
1415	--fatal)
1416	fatal="$FATALOP"
1417	;;
1418	--silent)
1419	ISSILENT="$SILENTOP"
1420	;;
1421	--ips)
1422	ISIPS="$IPSOP"
1423	;;
1424	--altkerndir)
1425	# Use alternate kernel driver config folder (dev only)
1426	DIR_CONF="/usr/kernel/drv"
1427	;;
1428	--sh-trace) # forwarded pkgadd -v
1429	set -x
1430	;;
1431	--help)
1432	printusage
1433	exit 1
1434	;;
1435	*)
1436	# Take a hard line on invalid options.
1437	errorprint "Invalid command line option: \"$1\""
1438	exit 1;
1439	;;
1440	esac
1441	shift
1442	done
1443
1444	case "$drvop" in
1445	--postinstall)
1446	check_module_arch
1447	postinstall
1448	;;
1449	--preremove)
1450	preremove "$fatal"
1451	;;
1452	--installdrivers)
1453	check_module_arch
1454	install_drivers
1455	;;
1456	--removedrivers)
1457	remove_drivers "$fatal"
1458	;;
1459	--setupdrivers)
1460	remove_drivers "$fatal"
1461	infoprint "Installing VirtualBox drivers:"
1462	install_drivers
1463	;;
1464	*)
1465	printusage
1466	exit 1
1467	esac
1468
1469	exit "$?"
1470

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Installer/solaris/vboxconfig.sh@ 95685

Download in other formats: