vboxdrv.sh@ 91749

Last change on this file since 91749 was 90431, checked in by vboxsync, 3 years ago
Installer: Linux: vboxdrv.sh: fix modules presence detection, bugref:9958.
Property svn:eol-style set to `LF` Property svn:keywords set to `Author Date Id Revision`
File size: 22.5 KB

Line
1	#! /bin/sh
2	# Oracle VM VirtualBox
3	# Linux kernel module init script
4
5	#
6	# Copyright (C) 2006-2020 Oracle Corporation
7	#
8	# This file is part of VirtualBox Open Source Edition (OSE), as
9	# available from http://www.virtualbox.org. This file is free software;
10	# you can redistribute it and/or modify it under the terms of the GNU
11	# General Public License (GPL) as published by the Free Software
12	# Foundation, in version 2 as it comes in the "COPYING" file of the
13	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	#
16
17	# chkconfig: 345 20 80
18	# description: VirtualBox Linux kernel module
19	#
20	### BEGIN INIT INFO
21	# Provides: vboxdrv
22	# Required-Start: $syslog
23	# Required-Stop:
24	# Default-Start: 2 3 4 5
25	# Default-Stop: 0 1 6
26	# Short-Description: VirtualBox Linux kernel module
27	### END INIT INFO
28
29	## @todo This file duplicates a lot of script with vboxadd.sh. When making
30	# changes please try to reduce differences between the two wherever possible.
31
32	## @todo Remove the stop_vms target so that this script is only relevant to
33	# kernel modules. Nice but not urgent.
34
35	PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
36	DEVICE=/dev/vboxdrv
37	MODPROBE=/sbin/modprobe
38	SCRIPTNAME=vboxdrv.sh
39
40	# The below is GNU-specific. See VBox.sh for the longer Solaris/OS X version.
41	TARGET=`readlink -e -- "${0}"` \|\| exit 1
42	SCRIPT_DIR="${TARGET%/[!/]*}"
43
44	if $MODPROBE -c \| grep -q '^allow_unsupported_modules *0'; then
45	MODPROBE="$MODPROBE --allow-unsupported-modules"
46	fi
47
48	setup_log()
49	{
50	test -n "${LOG}" && return 0
51	# Rotate log files
52	LOG="/var/log/vbox-setup.log"
53	mv "${LOG}.3" "${LOG}.4" 2>/dev/null
54	mv "${LOG}.2" "${LOG}.3" 2>/dev/null
55	mv "${LOG}.1" "${LOG}.2" 2>/dev/null
56	mv "${LOG}" "${LOG}.1" 2>/dev/null
57	}
58
59	[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
60	export VBOX_KBUILD_TYPE
61	export USERNAME
62	export USER=$USERNAME
63
64	if test -n "${INSTALL_DIR}" && test -x "${INSTALL_DIR}/VirtualBox"; then
65	MODULE_SRC="${INSTALL_DIR}/src/vboxhost"
66	elif test -x /usr/lib/virtualbox/VirtualBox; then
67	INSTALL_DIR=/usr/lib/virtualbox
68	MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
69	elif test -x "${SCRIPT_DIR}/VirtualBox"; then
70	# Executing from the build directory
71	INSTALL_DIR="${SCRIPT_DIR}"
72	MODULE_SRC="${INSTALL_DIR}/src"
73	else
74	# Silently exit if the package was uninstalled but not purged.
75	# Applies to Debian packages only (but shouldn't hurt elsewhere)
76	exit 0
77	fi
78	VIRTUALBOX="${INSTALL_DIR}/VirtualBox"
79	VBOXMANAGE="${INSTALL_DIR}/VBoxManage"
80	BUILDINTMP="${MODULE_SRC}/build_in_tmp"
81	if test -u "${VIRTUALBOX}"; then
82	GROUP=root
83	DEVICE_MODE=0600
84	else
85	GROUP=vboxusers
86	DEVICE_MODE=0660
87	fi
88
89	KERN_VER=`uname -r`
90	if test -e "${MODULE_SRC}/vboxpci"; then
91	MODULE_LIST="vboxdrv vboxnetflt vboxnetadp vboxpci"
92	else
93	MODULE_LIST="vboxdrv vboxnetflt vboxnetadp"
94	fi
95	# Secure boot state.
96	case "`mokutil --sb-state 2>/dev/null`" in
97	"disabled in shim") unset HAVE_SEC_BOOT;;
98	"SecureBoot enabled") HAVE_SEC_BOOT=true;;
99	*) unset HAVE_SEC_BOOT;;
100	esac
101	# So far we can only sign modules on Ubuntu and on Debian 10 and later.
102	DEB_PUB_KEY=/var/lib/shim-signed/mok/MOK.der
103	DEB_PRIV_KEY=/var/lib/shim-signed/mok/MOK.priv
104	unset HAVE_DEB_KEY
105	case "`mokutil --test-key "$DEB_PUB_KEY" 2>/dev/null`" in
106	"is already") DEB_KEY_ENROLLED=true;;
107	*) unset DEB_KEY_ENROLLED;;
108	esac
109
110	[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox
111
112	# Preamble for Gentoo
113	if [ "`which $0`" = "/sbin/rc" ]; then
114	shift
115	fi
116
117	begin_msg()
118	{
119	test -n "${2}" && echo "${SCRIPTNAME}: ${1}."
120	logger -t "${SCRIPTNAME}" "${1}."
121	}
122
123	succ_msg()
124	{
125	logger -t "${SCRIPTNAME}" "${1}."
126	}
127
128	fail_msg()
129	{
130	echo "${SCRIPTNAME}: failed: ${1}." >&2
131	logger -t "${SCRIPTNAME}" "failed: ${1}."
132	}
133
134	failure()
135	{
136	fail_msg "$1"
137	exit 1
138	}
139
140	running()
141	{
142	lsmod \| grep -q "$1[^_-]"
143	}
144
145	log()
146	{
147	setup_log
148	echo "${1}" >> "${LOG}"
149	}
150
151	module_build_log()
152	{
153	setup_log
154	echo "${1}" \| egrep -v \
155	"^test -e include/generated/autoconf.h\|^echo >&2\|^/bin/false\)$" \
156	>> "${LOG}"
157	}
158
159	# Detect VirtualBox version info or report error.
160	VBOX_VERSION="`"$VBOXMANAGE" -v \| cut -d r -f1`"
161	[ -n "$VBOX_VERSION" ] \|\| failure 'Cannot detect VirtualBox version number'
162	VBOX_REVISION="r`"$VBOXMANAGE" -v \| cut -d r -f2`"
163	[ "$VBOX_REVISION" != "r" ] \|\| failure 'Cannot detect VirtualBox revision number'
164
165	## Output the vboxdrv part of our udev rule. This is redirected to the right file.
166	udev_write_vboxdrv() {
167	VBOXDRV_GRP="$1"
168	VBOXDRV_MODE="$2"
169
170	echo "KERNEL==\"vboxdrv\", NAME=\"vboxdrv\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
171	echo "KERNEL==\"vboxdrvu\", NAME=\"vboxdrvu\", OWNER=\"root\", GROUP=\"root\", MODE=\"0666\""
172	echo "KERNEL==\"vboxnetctl\", NAME=\"vboxnetctl\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
173	}
174
175	## Output the USB part of our udev rule. This is redirected to the right file.
176	udev_write_usb() {
177	INSTALLATION_DIR="$1"
178	USB_GROUP="$2"
179
180	echo "SUBSYSTEM==\"usb_device\", ACTION==\"add\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
181	echo "SUBSYSTEM==\"usb\", ACTION==\"add\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
182	echo "SUBSYSTEM==\"usb_device\", ACTION==\"remove\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
183	echo "SUBSYSTEM==\"usb\", ACTION==\"remove\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
184	}
185
186	## Generate our udev rule file. This takes a change in udev rule syntax in
187	## version 55 into account. It only creates rules for USB for udev versions
188	## recent enough to support USB device nodes.
189	generate_udev_rule() {
190	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
191	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
192	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
193	USB_GROUP="$4" # The group that has permission to access USB devices
194	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
195
196	# Extra space!
197	case "$USB_GROUP" in ?*) USB_GROUP=" $USB_GROUP" ;; esac
198	case "$NO_INSTALL" in "1") return ;; esac
199	udev_write_vboxdrv "$VBOXDRV_GRP" "$VBOXDRV_MODE"
200	udev_write_usb "$INSTALLATION_DIR" "$USB_GROUP"
201	}
202
203	## Install udev rule (disable with INSTALL_NO_UDEV=1 in
204	## /etc/default/virtualbox).
205	install_udev() {
206	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
207	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
208	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
209	USB_GROUP="$4" # The group that has permission to access USB devices
210	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
211
212	if test -d /etc/udev/rules.d; then
213	generate_udev_rule "$VBOXDRV_GRP" "$VBOXDRV_MODE" "$INSTALLATION_DIR" \
214	"$USB_GROUP" "$NO_INSTALL"
215	fi
216	# Remove old udev description file
217	rm -f /etc/udev/rules.d/10-vboxdrv.rules 2> /dev/null
218	}
219
220	## Create a usb device node for a given sysfs path to a USB device.
221	install_create_usb_node_for_sysfs() {
222	path="$1" # sysfs path for the device
223	usb_createnode="$2" # Path to the USB device node creation script
224	usb_group="$3" # The group to give ownership of the node to
225	if test -r "${path}/dev"; then
226	dev="`cat "${path}/dev" 2> /dev/null`"
227	major="`expr "$dev" : '$.*$:' 2> /dev/null`"
228	minor="`expr "$dev" : '.:$.$' 2> /dev/null`"
229	class="`cat ${path}/bDeviceClass 2> /dev/null`"
230	sh "${usb_createnode}" "$major" "$minor" "$class" \
231	"${usb_group}" 2>/dev/null
232	fi
233	}
234
235	udev_rule_file=/etc/udev/rules.d/60-vboxdrv.rules
236	sysfs_usb_devices="/sys/bus/usb/devices/*"
237
238	## Install udev rules and create device nodes for usb access
239	setup_usb() {
240	VBOXDRV_GRP="$1" # The group that should own /dev/vboxdrv
241	VBOXDRV_MODE="$2" # The mode to be used for /dev/vboxdrv
242	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
243	USB_GROUP="$4" # The group that should own the /dev/vboxusb device
244	# nodes unless INSTALL_NO_GROUP=1 in
245	# /etc/default/virtualbox. Optional.
246	usb_createnode="$INSTALLATION_DIR/VBoxCreateUSBNode.sh"
247	# install udev rule (disable with INSTALL_NO_UDEV=1 in
248	# /etc/default/virtualbox)
249	if [ "$INSTALL_NO_GROUP" != "1" ]; then
250	usb_group=$USB_GROUP
251	vboxdrv_group=$VBOXDRV_GRP
252	else
253	usb_group=root
254	vboxdrv_group=root
255	fi
256	install_udev "${vboxdrv_group}" "$VBOXDRV_MODE" \
257	"$INSTALLATION_DIR" "${usb_group}" \
258	"$INSTALL_NO_UDEV" > ${udev_rule_file}
259	# Build our device tree
260	for i in ${sysfs_usb_devices}; do # This line intentionally without quotes.
261	install_create_usb_node_for_sysfs "$i" "${usb_createnode}" \
262	"${usb_group}"
263	done
264	}
265
266	cleanup_usb()
267	{
268	# Remove udev description file
269	rm -f /etc/udev/rules.d/60-vboxdrv.rules
270	rm -f /etc/udev/rules.d/10-vboxdrv.rules
271
272	# Remove our USB device tree
273	rm -rf /dev/vboxusb
274	}
275
276	# Returns path to module file as seen by modinfo(8) or empty string.
277	module_path()
278	{
279	mod="$1"
280	[ -n "$mod" ] \|\| return
281
282	modinfo "$mod" 2>/dev/null \| grep -e "^filename:" \| tr -s ' ' \| cut -d " " -f2
283	}
284
285	# Returns module version if module is available or empty string.
286	module_version()
287	{
288	mod="$1"
289	[ -n "$mod" ] \|\| return
290
291	modinfo "$mod" 2>/dev/null \| grep -e "^version:" \| tr -s ' ' \| cut -d " " -f2
292	}
293
294	# Returns module revision if module is available in the system or empty string.
295	module_revision()
296	{
297	mod="$1"
298	[ -n "$mod" ] \|\| return
299
300	modinfo "$mod" 2>/dev/null \| grep -e "^version:" \| tr -s ' ' \| cut -d " " -f3
301	}
302
303	# Returns "1" if externally built module is available in the system and its
304	# version and revision number do match to current VirtualBox installation.
305	# Or empty string otherwise.
306	module_available()
307	{
308	mod="$1"
309	[ -n "$mod" ] \|\| return
310
311	[ "$VBOX_VERSION" = "$(module_version "$mod")" ] \|\| return
312	[ "$VBOX_REVISION" = "$(module_revision "$mod")" ] \|\| return
313
314	# Check if module belongs to VirtualBox installation.
315	#
316	# We have a convention that only modules from /lib/modules/*/misc
317	# belong to us. Modules from other locations are treated as
318	# externally built.
319	mod_path="$(module_path "$mod")"
320
321	# If module path points to a symbolic link, resolve actual file location.
322	[ -L "$mod_path" ] && mod_path="$(readlink -e -- "$mod_path")"
323
324	# File exists?
325	[ -f "$mod_path" ] \|\| return
326
327	# Extract last component of module path and check whether it is located
328	# outside of /lib/modules/*/misc.
329	mod_dir="$(dirname "$mod_path" \| sed 's;^.*/;;')"
330	[ "$mod_dir" = "misc" ] \|\| return
331
332	echo "1"
333	}
334
335	# Check if required modules are installed in the system and versions match.
336	setup_complete()
337	{
338	[ "$(module_available vboxdrv)" = "1" ] \|\| return
339	[ "$(module_available vboxnetflt)" = "1" ] \|\| return
340	[ "$(module_available vboxnetadp)" = "1" ] \|\| return
341
342	# All modules are in place.
343	echo "1"
344	}
345
346	start()
347	{
348	begin_msg "Starting VirtualBox services" console
349	if [ -d /proc/xen ]; then
350	failure "Running VirtualBox in a Xen environment is not supported"
351	fi
352	if test -n "$HAVE_SEC_BOOT" && test -z "$DEB_KEY_ENROLLED"; then
353	if test -n "$HAVE_DEB_KEY"; then
354	begin_msg "You must re-start your system to finish Debian secure boot set-up." console
355	else
356	begin_msg "You must sign these kernel modules before using VirtualBox:
357	$MODULE_LIST
358	See the documentation for your Linux distribution." console
359	fi
360	fi
361
362	if ! running vboxdrv; then
363
364	# Check if system already has matching modules installed.
365	[ "$(setup_complete)" = "1" ] \|\| setup
366
367	if ! rm -f $DEVICE; then
368	failure "Cannot remove $DEVICE"
369	fi
370	if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
371	failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
372	fi
373	sleep .2
374	fi
375	# ensure the character special exists
376	if [ ! -c $DEVICE ]; then
377	MAJOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/devices`
378	if [ ! -z "$MAJOR" ]; then
379	MINOR=0
380	else
381	MINOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/misc`
382	if [ ! -z "$MINOR" ]; then
383	MAJOR=10
384	fi
385	fi
386	if [ -z "$MAJOR" ]; then
387	rmmod vboxdrv 2>/dev/null
388	failure "Cannot locate the VirtualBox device"
389	fi
390	if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
391	rmmod vboxdrv 2>/dev/null
392	failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
393	fi
394	fi
395	# ensure permissions
396	if ! chown :"${GROUP}" $DEVICE 2>/dev/null; then
397	rmmod vboxpci 2>/dev/null
398	rmmod vboxnetadp 2>/dev/null
399	rmmod vboxnetflt 2>/dev/null
400	rmmod vboxdrv 2>/dev/null
401	failure "Cannot change group ${GROUP} for device $DEVICE"
402	fi
403	if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
404	failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
405	fi
406	if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
407	failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
408	fi
409	if test -e "${MODULE_SRC}/vboxpci" && ! $MODPROBE vboxpci > /dev/null 2>&1; then
410	failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
411	fi
412	# Create the /dev/vboxusb directory if the host supports that method
413	# of USB access. The USB code checks for the existance of that path.
414	if grep -q usb_device /proc/devices; then
415	mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
416	chown root:vboxusers /dev/vboxusb 2>/dev/null
417	fi
418	# Remove any kernel modules left over from previously installed kernels.
419	cleanup only_old
420	succ_msg "VirtualBox services started"
421	}
422
423	stop()
424	{
425	begin_msg "Stopping VirtualBox services" console
426
427	if running vboxpci; then
428	if ! rmmod vboxpci 2>/dev/null; then
429	failure "Cannot unload module vboxpci"
430	fi
431	fi
432	if running vboxnetadp; then
433	if ! rmmod vboxnetadp 2>/dev/null; then
434	failure "Cannot unload module vboxnetadp"
435	fi
436	fi
437	if running vboxdrv; then
438	if running vboxnetflt; then
439	if ! rmmod vboxnetflt 2>/dev/null; then
440	failure "Cannot unload module vboxnetflt"
441	fi
442	fi
443	if ! rmmod vboxdrv 2>/dev/null; then
444	failure "Cannot unload module vboxdrv"
445	fi
446	if ! rm -f $DEVICE; then
447	failure "Cannot unlink $DEVICE"
448	fi
449	fi
450	succ_msg "VirtualBox services stopped"
451	}
452
453	# enter the following variables in /etc/default/virtualbox:
454	# SHUTDOWN_USERS="foo bar"
455	# check for running VMs of user foo and user bar
456	# SHUTDOWN=poweroff
457	# SHUTDOWN=acpibutton
458	# SHUTDOWN=savestate
459	# select one of these shutdown methods for running VMs
460	stop_vms()
461	{
462	wait=0
463	for i in $SHUTDOWN_USERS; do
464	# don't create the ipcd directory with wrong permissions!
465	if [ -d /tmp/.vbox-$i-ipc ]; then
466	export VBOX_IPC_SOCKETID="$i"
467	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
468	if [ -n "$VMS" ]; then
469	if [ "$SHUTDOWN" = "poweroff" ]; then
470	begin_msg "Powering off remaining VMs"
471	for v in $VMS; do
472	$VBOXMANAGE --nologo controlvm $v poweroff
473	done
474	succ_msg "Remaining VMs powered off"
475	elif [ "$SHUTDOWN" = "acpibutton" ]; then
476	begin_msg "Sending ACPI power button event to remaining VMs"
477	for v in $VMS; do
478	$VBOXMANAGE --nologo controlvm $v acpipowerbutton
479	wait=30
480	done
481	succ_msg "ACPI power button event sent to remaining VMs"
482	elif [ "$SHUTDOWN" = "savestate" ]; then
483	begin_msg "Saving state of remaining VMs"
484	for v in $VMS; do
485	$VBOXMANAGE --nologo controlvm $v savestate
486	done
487	succ_msg "State of remaining VMs saved"
488	fi
489	fi
490	fi
491	done
492	# wait for some seconds when doing ACPI shutdown
493	if [ "$wait" -ne 0 ]; then
494	begin_msg "Waiting for $wait seconds for VM shutdown"
495	sleep $wait
496	succ_msg "Waited for $wait seconds for VM shutdown"
497	fi
498	}
499
500	cleanup()
501	{
502	# If this is set, only remove kernel modules for no longer installed
503	# kernels. Note that only generated kernel modules should be placed
504	# in /lib/modules/*/misc. Anything that we should not remove automatically
505	# should go elsewhere.
506	only_old="${1}"
507	for i in /lib/modules/*; do
508	# Check whether we are only cleaning up for uninstalled kernels.
509	test -n "${only_old}" && test -e "${i}/kernel/drivers" && continue
510	# We could just do "rm -f", but we only want to try deleting folders if
511	# we are sure they were ours, i.e. they had our modules in beforehand.
512	if test -e "${i}/misc/vboxdrv.ko" \
513	\|\| test -e "${i}/misc/vboxnetadp.ko" \
514	\|\| test -e "${i}/misc/vboxnetflt.ko" \
515	\|\| test -e "${i}/misc/vboxpci.ko"; then
516	rm -f "${i}/misc/vboxdrv.ko" "${i}/misc/vboxnetadp.ko" \
517	"${i}/misc/vboxnetflt.ko" "${i}/misc/vboxpci.ko"
518	version=`expr "${i}" : "/lib/modules/$.*$"`
519	depmod -a "${version}"
520	sync
521	fi
522	# Remove the kernel version folder if it was empty except for us.
523	test "`echo ${i}/misc/* ${i}/misc/.?* ${i}/* ${i}/.?*`" \
524	= "${i}/misc/* ${i}/misc/.. ${i}/misc ${i}/.." &&
525	rmdir "${i}/misc" "${i}" # We used to leave empty folders.
526	done
527	}
528
529	# setup_script
530	setup()
531	{
532	begin_msg "Building VirtualBox kernel modules" console
533	log "Building the main VirtualBox module."
534	if ! myerr=`$BUILDINTMP \
535	--save-module-symvers /tmp/vboxdrv-Module.symvers \
536	--module-source "$MODULE_SRC/vboxdrv" \
537	--no-print-directory install 2>&1`; then
538	"${INSTALL_DIR}/check_module_dependencies.sh" \|\| exit 1
539	log "Error building the module:"
540	module_build_log "$myerr"
541	failure "Look at $LOG to find out what went wrong"
542	fi
543	log "Building the net filter module."
544	if ! myerr=`$BUILDINTMP \
545	--use-module-symvers /tmp/vboxdrv-Module.symvers \
546	--module-source "$MODULE_SRC/vboxnetflt" \
547	--no-print-directory install 2>&1`; then
548	log "Error building the module:"
549	module_build_log "$myerr"
550	failure "Look at $LOG to find out what went wrong"
551	fi
552	log "Building the net adaptor module."
553	if ! myerr=`$BUILDINTMP \
554	--use-module-symvers /tmp/vboxdrv-Module.symvers \
555	--module-source "$MODULE_SRC/vboxnetadp" \
556	--no-print-directory install 2>&1`; then
557	log "Error building the module:"
558	module_build_log "$myerr"
559	failure "Look at $LOG to find out what went wrong"
560	fi
561	if test -e "$MODULE_SRC/vboxpci"; then
562	log "Building the PCI pass-through module."
563	if ! myerr=`$BUILDINTMP \
564	--use-module-symvers /tmp/vboxdrv-Module.symvers \
565	--module-source "$MODULE_SRC/vboxpci" \
566	--no-print-directory install 2>&1`; then
567	log "Error building the module:"
568	module_build_log "$myerr"
569	failure "Look at $LOG to find out what went wrong"
570	fi
571	fi
572	rm -f /etc/vbox/module_not_compiled
573	depmod -a
574	sync
575	succ_msg "VirtualBox kernel modules built"
576	# Secure boot on Ubuntu and Debian.
577	if test -n "$HAVE_SEC_BOOT" &&
578	type update-secureboot-policy >/dev/null 2>&1; then
579	SHIM_NOTRIGGER=y update-secureboot-policy --new-key
580	fi
581	if test -f "$DEB_PUB_KEY" && test -f "$DEB_PRIV_KEY"; then
582	HAVE_DEB_KEY=true
583	for i in $MODULE_LIST; do
584	kmodsign sha512 /var/lib/shim-signed/mok/MOK.priv \
585	/var/lib/shim-signed/mok/MOK.der \
586	/lib/modules/"$KERN_VER"/misc/"$i".ko
587	done
588	# update-secureboot-policy "expects" DKMS modules.
589	# Work around this and talk to the authors as soon
590	# as possible to fix it.
591	mkdir -p /var/lib/dkms/vbox-temp
592	update-secureboot-policy --enroll-key 2>/dev/null \|\|
593	begin_msg "Failed to enroll secure boot key." console
594	rmdir -p /var/lib/dkms/vbox-temp 2>/dev/null
595	fi
596	}
597
598	dmnstatus()
599	{
600	if running vboxdrv; then
601	str="vboxdrv"
602	if running vboxnetflt; then
603	str="$str, vboxnetflt"
604	if running vboxnetadp; then
605	str="$str, vboxnetadp"
606	fi
607	fi
608	if running vboxpci; then
609	str="$str, vboxpci"
610	fi
611	echo "VirtualBox kernel modules ($str) are loaded."
612	for i in $SHUTDOWN_USERS; do
613	# don't create the ipcd directory with wrong permissions!
614	if [ -d /tmp/.vbox-$i-ipc ]; then
615	export VBOX_IPC_SOCKETID="$i"
616	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
617	if [ -n "$VMS" ]; then
618	echo "The following VMs are currently running:"
619	for v in $VMS; do
620	echo " $v"
621	done
622	fi
623	fi
624	done
625	else
626	echo "VirtualBox kernel module is not loaded."
627	fi
628	}
629
630	case "$1" in
631	start)
632	start
633	;;
634	stop)
635	stop_vms
636	stop
637	;;
638	stop_vms)
639	stop_vms
640	;;
641	restart)
642	stop && start
643	;;
644	setup)
645	test -n "${2}" && export KERN_VER="${2}"
646	# Create udev rule and USB device nodes.
647	## todo Wouldn't it make more sense to install the rule to /lib/udev? This
648	## is not a user-created configuration file after all.
649	## todo Do we need a udev rule to create /dev/vboxdrv[u] at all? We have
650	## working fall-back code here anyway, and the "right" code is more complex
651	## than the fall-back. Unnecessary duplication?
652	stop && cleanup
653	setup_usb "$GROUP" "$DEVICE_MODE" "$INSTALL_DIR"
654	start
655	;;
656	cleanup)
657	stop && cleanup
658	cleanup_usb
659	;;
660	force-reload)
661	stop
662	start
663	;;
664	status)
665	dmnstatus
666	;;
667	*)
668	echo "Usage: $0 {start\|stop\|stop_vms\|restart\|setup\|cleanup\|force-reload\|status}"
669	exit 1
670	esac
671
672	exit 0

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Installer/linux/vboxdrv.sh@ 91749

Download in other formats: