@@@ English Native language name العربية -- Native language country name (empty if this language is for all countries) English Language name, in English Arabic -- Language country name, in English (empty if native country name is empty) Oracle Corporation Comma-separated list of translators Berdai Mohammed BootItemsList Move the selected boot device up. حرك وسيلة بدء التشغيل إلى اﻷعلى. Move the selected boot device down. حرك وسيلة بدء التشغيل إلى اﻷسفل. Move Up (Ctrl-Up) حرك إلى اﻷعلى Move Down (Ctrl-Down) حرك إلى اﻷسفل BootItemsTable Defines the boot device order. Use the checkboxes on the left to enable or disable individual boot devices. Move items up and down to change the device order. لتحدد تسلسل وسائل بدء التشغيل. إستخدم العلامات المتواجدة على اليسار لتفعيل أو تعطيل أحد وسائل بدء التشغيل. حرك إلى اﻷعلى و اﻷسفل لتغير تسلسل وسائل بدء التشغيل. QApplication The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Please try completely uninstalling and reinstalling VirtualBox. The VirtualBox kernel modules do not match this version of VirtualBox. The installation of VirtualBox was apparently not successful. Executing '/etc/init.d/vboxdrv setup' may correct this. Make sure that you do not mix the OSE version and the PUEL version of VirtualBox. Make sure the kernel module has been loaded successfully. Executable %1 requires Qt %2.x, found Qt %3. البرنامج التنفيدي %1 يحتاج إلى Qt %2.x بدل من Qt %3. Incompatible Qt Library Error خطأ ناتج عن عدم التوافق مع مكتبة Qt VirtualBox - Runtime Error Cannot access the kernel driver! Kernel driver not accessible Unknown error %2 during initialization of the Runtime VirtualBox - Error In %1 <html>%1 (rc=%2) Please try reinstalling VirtualBox. This error means that the kernel driver was either not able to allocate enough memory or that some mapping operation failed. The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup' as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. QIArrowSplitter &Back &Next QIFileDialog Select a directory Select a file QIHelpButton &Help &مساعدة QILabel &Copy QIMessageBox OK موافق Yes نعم No لا Cancel إلغاء Ignore تجاهل &Details &تفاصيل &Details (%1 of %2) Copy all errors to the clipboard Copy QIRichLabel Copy to clipboard إنسخ إلى الذاكرة QIWidgetValidator not complete value state invalid value state <qt>The value of the %1 field on the %2 page is %3.</qt> <qt>One of the values on the %1 page is %2.</qt> QIWizardPage Use the %1 button to go to the next page of the wizard and the %2 button to return to the previous page. You can also press %3 if you want to cancel the execution of this wizard. QListBox Inaccessible متعذر بلوغه(ها) UIActionPool &Machine Automatically resize the guest display when the window is resized (requires Guest Additions) &Adjust Window Size Adjust window size and position to best fit the guest display Disable &Mouse Integration Temporarily disable host mouse pointer integration &Insert Ctrl-Alt-Del Send the Ctrl-Alt-Del sequence to the virtual machine Send the Ctrl-Alt-Backspace sequence to the virtual machine Take a snapshot of the virtual machine Show Session Information Dialog &Pause Suspend the execution of the virtual machine &Reset Reset the virtual machine ACPI Sh&utdown Send the ACPI Power Button press event to the virtual machine &Close... Close the virtual machine &View &Devices &CD/DVD Devices &Floppy Devices &USB Devices &Network Adapters... Change the settings of network adapters &Shared Folders... Create or modify shared folders &Install Guest Additions... Mount the Guest Additions installation image De&bug &Statistics... debug action &Command Line... debug action &Help &مساعدة Dock Icon Show Monitor Preview Show Application Icon Enable remote desktop (RDP) connections to this machine Enable &Logging... debug action Switch to &Fullscreen Switch between normal and fullscreen mode Switch to Seam&less Mode Switch between normal and seamless desktop integration mode Switch to &Scale Mode Switch between normal and scale mode Auto-resize &Guest Display Enable R&emote Display &Settings... Manage the virtual machine settings Session I&nformation... &File Mac OS X version &ملف &File Non Mac OS X version &ملف &Virtual Media Manager... Display the Virtual Media Manager dialog &Import Appliance... Import an appliance into VirtualBox &Export Appliance... Export one or more VirtualBox virtual machines as an appliance &Preferences... global settings Display the global settings dialog E&xit خ&روج Close application إغلاق البرنامج &New... &جديد... Create a new virtual machine &Add... &أظف... Add an existing virtual machine Cl&one... Clone the selected virtual machine &Remove Remove the selected virtual machine S&tart إ&بدأ Start the selected virtual machine S&how أ&ظهر Switch to the window of the selected virtual machine Discard إلغاء D&iscard Saved State Discard the saved state of the selected virtual machine Re&fresh أن&عش Refresh the accessibility state of the selected virtual machine Show &Log... Show the log files of the selected virtual machine Show in Finder Show the VirtualBox Machine Definition file in Finder. Show in Explorer Show the VirtualBox Machine Definition file in Explorer. Show in File Manager Show the VirtualBox Machine Definition file in the File Manager Create Alias on Desktop Creates an Alias file to the VirtualBox Machine Definition file on your Desktop. Create Shortcut on Desktop Creates an Shortcut file to the VirtualBox Machine Definition file on your Desktop. Take Sn&apshot... Take Screensh&ot... Take a screenshot of the virtual machine Ins&ert Ctrl-Alt-Backspace Sort List Sort the VM list alphabetically (Shift for descending order) &Close Po&wer Off Power off the virtual machine UIApplianceEditorWidget Virtual System %1 Name إسم Product Product-URL Vendor Vendor-URL Version Description License Guest OS Type CPU RAM Hard Disk Controller (IDE) Hard Disk Controller (SATA) Hard Disk Controller (SCSI) DVD Floppy Network Adapter USB Controller Sound Card Virtual Disk Image Unknown Hardware Item Original Value: %1 Configuration Warnings: Hard Disk Controller (SAS) When checked a new unique MAC address will assigned to all configured network cards. &Reinitialize the MAC address of all network cards UIApplianceImportEditorWidget Importing Appliance ... Reading Appliance ... UICloneVMWizard Clone a virtual machine Clone Linked Base for %1 and %2 UICloneVMWizardPage1 This wizard will help you to create a clone of your virtual machine. Please choose a name for the new virtual machine: &Reinitialize the MAC address of all network cards Welcome to the virtual machine clone wizard %1 Clone When checked a new unique MAC address will be assigned to all configured network cards. UICloneVMWizardPage2 Cloning Configuration Full Clone Linked Clone Please select the type of the clone.If you choose Full Clone an exact copy (including all virtual disk images) of the original VM will be created. If you select Linked Clone, a new VM will be created, but the virtual disk images will point to the virtual disk images of original VM. Note that a new snapshot within the source VM is created in case you select Linked Clone. UICloneVMWizardPage3 Current machine state Current machine and all child states All states Cloning Configuration Please choose which parts of the virtual machine should be cloned. If you select Current machine state, only the current state of the virtual machine is cloned. If you select Current machine and all child states the current state of the virtual machine and any states of child snapshots are cloned. If you select All states, the current machine state and all snapshots are cloned. UIDescriptionPagePrivate No description. Press the Edit button below to add it. Edit Edit (Ctrl+E) UIDetailsBlock Name details report إسم OS Type details report Information inaccessible details report Base Memory details report %1 MB details report Processors details report %1 details report Execution Cap details report %1% details report Boot Order details report ACPI details report IO APIC details report BIOS details report VT-x/AMD-V details report Nested Paging details report PAE/NX details report Acceleration details report Video Memory details report Screens details report 2D Video details report 3D details report 3D Remote Desktop Server Port details report (VRDE Server) Remote Desktop Server details report (VRDE Server) Disabled details report (VRDE Server) عطِل (CD/DVD) Not Attached details report (Storage) Host Driver details report (audio) Controller details report (audio) Disabled details report (audio) عطِل Bridged adapter, %1 details report (network) Internal network, '%1' details report (network) Host-only adapter, '%1' details report (network) Generic driver, '%1' details report (network) Generic driver, '%1' { %2 } details report (network) Adapter %1 details report (network) Disabled details report (network) عطِل Port %1 details report (serial ports) Disabled details report (serial ports) عطِل Port %1 details report (parallel ports) Disabled details report (parallel ports) عطِل Device Filters details report (USB) %1 (%2 active) details report (USB) Disabled details report (USB) عطِل Shared Folders details report (shared folders) None details report (shared folders) None details report (description) UIDetailsPagePrivate Name details report إسم 3D details report 3D Disabled details report (VRDE Server) عطِل Disabled details report (audio) عطِل Disabled details report (network) عطِل Disabled details report (serial ports) عطِل Disabled details report (parallel ports) عطِل Disabled details report (USB) عطِل The selected virtual machine is inaccessible. Please inspect the error message shown below and press the Refresh button if you want to repeat the accessibility check: اﻷلة الواقعية المختارة inaccessible. المرجوا التأكد من رسالة الخطأ البارزة أسفله ثم إظغط على زر Refresh إذا أردت إعادت الإختبار: General details report System details report Preview details report Display details report Storage details report Audio details report Network details report Serial Ports details report Parallel Ports details report USB details report Shared Folders details report Description details report UIDownloader Cancel إلغاء Looking for %1... Downloading %1... UIDownloaderAdditions Cancel إلغاء Select folder to save Guest Additions image to VirtualBox Guest Additions UIDownloaderExtensionPack Select folder to save %1 to VirtualBox Extension Pack UIDownloaderUserManual Select folder to save User Manual to VirtualBox User Manual UIExportApplianceWzd Appliance Export Wizard Cancel إلغاء Restore Defaults Export UIExportApplianceWzdPage1 Welcome to the Appliance Export Wizard! This wizard will guide you through the process of exporting an appliance.%1Please select the virtual machines that should be added to the appliance. You can select more than one. Please note that these machines have to be turned off before they can be exported. UIExportApplianceWzdPage2 Appliance Export Settings Please specify the target for the OVF export. You can choose between a local file system export, uploading the OVF to the Sun Cloud service or an S3 storage server. &Local Filesystem Sun &Cloud &Simple Storage System (S3) UIExportApplianceWzdPage3 Appliance Export Settings &Username: &Password: &Hostname: &Bucket: &File: Write in legacy OVF 0.9 format for compatibility with other virtualization products. &Write legacy OVF 0.9 Create a Manifest file for automatic data integrity checks on import. Write &Manifest file Appliance Select a file to export into Open Virtualization Format Archive (%1) Open Virtualization Format (%1) Please choose a filename to export the OVF/OVA to. If you use an ova file name extension, then all the files will be combined into one Open Virtualization Format Archive. If you use an ovf extension, several files will be written separately. Other extensions are not allowed. Please complete the additional fields like the username, password and the bucket, and provide a filename for the OVF target. Please complete the additional fields like the username, password, hostname and the bucket, and provide a filename for the OVF target. UIExportApplianceWzdPage4 Appliance Export Settings Checking files ... Removing files ... Exporting Appliance ... Here you can change additional configuration values of the selected virtual machines. You can modify most of the properties shown by double-clicking on the items. UIFirstRunWzd First Run Wizard Alt+C Alt+C Alt+F Alt+F Cancel إلغاء Start إبدأ UIFirstRunWzdPage1 Welcome to the First Run Wizard! You have started a newly created virtual machine for the first time. This wizard will help you to perform the steps necessary for installing an operating system of your choice onto this virtual machine.%1 You have started a newly created virtual machine for the first time. This wizard will help you to perform the steps necessary for booting an operating system of your choice on the virtual machine.Note that you will not be able to install an operating system into this virtual machine right now because you did not attach any hard disk to it. If this is not what you want, you can cancel the execution of this wizard, select Settings from the Machine menu of the main VirtualBox window to access the settings dialog of this machine and change the hard disk configuration.%1 UIFirstRunWzdPage2 Select the media which contains the setup program of the operating system you want to install. This media must be bootable, otherwise the setup program will not be able to start. Select the media that contains the operating system you want to work with. This media must be bootable, otherwise the operating system will not be able to start. Media Source Select Installation Media UIFirstRunWzdPage3 You have selected the following media to boot from: You have selected the following media to boot an operating system from: If the above is correct, press the Finish button. Once you press it, the selected media will be temporarily mounted on the virtual machine and the machine will start execution.Please note that when you close the virtual machine, the specified media will be automatically unmounted and the boot device will be set back to the first hard disk.Depending on the type of the setup program, you may need to manually unmount (eject) the media after the setup program reboots the virtual machine, to prevent the installation process from starting again. You can do this by selecting the corresponding Unmount... action in the Devices menu. If the above is correct, press the Finish button. Once you press it, the selected media will be mounted on the virtual machine and the machine will start execution. Summary CD/DVD-ROM Device Type summary Source summary UIGlobalSettingsDisplay Maximum Guest Screen &Size: &Width: Specifies the maximum width which we would like the guest to use. &Height: Specifies the maximum height which we would like the guest to use. Automatic Maximum Guest Screen Size Suggest a reasonable maximum screen size to the guest. The guest will only see this suggestion when guest additions are installed. None Maximum Guest Screen Size Do not attempt to limit the size of the guest screen. Hint Maximum Guest Screen Size Suggest a maximum screen size to the guest. The guest will only see this suggestion when guest additions are installed. UIGlobalSettingsExtension &Extension Packages: Lists all installed packages. Active Name إسم Version Add package Remove package Select an extension package file Extension package files (%1) Extensions UIGlobalSettingsGeneral Displays the path to the default virtual machine folder. This folder is used, if not explicitly specified otherwise, when creating new virtual machines. Displays the path to the library that provides authentication for Remote Display (VRDP) clients. Default &Machine Folder: V&RDP Authentication Library: When checked, the application will provide an icon with the context menu in the system tray. &Show System Tray Icon &Auto show Dock and Menubar in fullscreen When checked, the host screen saver will be disabled whenever a virtual machine is running. Disable Host &ScreenSaver UIGlobalSettingsInput Host &Key: Displays the key used as a Host Key in the VM window. Activate the entry field and press a new Host Key. Note that alphanumeric, cursor movement and editing keys cannot be used. When checked, the keyboard is automatically captured every time the VM window is activated. When the keyboard is captured, all keystrokes (including system ones like Alt-Tab) are directed to the VM. &Auto Capture Keyboard Reset host combination Resets the key combination used as the host combination in the VM window. UIGlobalSettingsLanguage (built-in) Language <unavailable> Language <unknown> Author(s) Default Language Language: لغة: &Interface Language: Lists all available user interface languages. The effective language is written in bold. Select Default to reset to the system default language. Name إسم Id Language لغة Author Author(s): UIGlobalSettingsNetwork host IPv4 address of %1 is wrong host IPv4 network mask of %1 is wrong host IPv6 address of %1 is wrong DHCP server address of %1 is wrong DHCP server network mask of %1 is wrong DHCP lower address bound of %1 is wrong DHCP upper address bound of %1 is wrong Adapter Automatically configured interface Manually configured interface IPv4 Address Not set address IPv4 Network Mask Not set mask IPv6 Address IPv6 Network Mask Length Not set length DHCP Server Enabled server مكِن Disabled server عطِل Address Network Mask Lower Bound Not set bound Upper Bound &Add host-only network &Remove host-only network &Edit host-only network &Host-only Networks: Lists all available host-only networks. Name إسم Networking UIGlobalSettingsNetworkDetails Host-only Network Details &Adapter Manual &Configuration Use manual configuration for this host-only network adapter. &IPv4 Address: Displays the host IPv4 address for this adapter. IPv4 Network &Mask: Displays the host IPv4 network mask for this adapter. I&Pv6 Address: Displays the host IPv6 address for this adapter if IPv6 is supported. IPv6 Network Mask &Length: Displays the host IPv6 network mask prefix length for this adapter if IPv6 is supported. &DHCP Server &Enable Server Indicates whether the DHCP Server is enabled on machine startup or not. Server Add&ress: Displays the address of the DHCP server servicing the network associated with this host-only adapter. Server &Mask: Displays the network mask of the DHCP server servicing the network associated with this host-only adapter. &Lower Address Bound: Displays the lower address bound offered by the DHCP server servicing the network associated with this host-only adapter. &Upper Address Bound: Displays the upper address bound offered by the DHCP server servicing the network associated with this host-only adapter. UIGlobalSettingsProxy When checked, VirtualBox will use the proxy settings supplied for tasks like downloading Guest Additions from the network or checking for updates. &Enable proxy Ho&st: Changes the proxy host. &Port: Changes the proxy port. When checked the authentication supplied will be used with the proxy server. &Use authentication User &name: Changes the user name used for authentication. Pass&word: Changes the password used for authentication. UIGlobalSettingsUpdate When checked, the application will periodically connect to the VirtualBox website and check whether a new VirtualBox version is available. &Check for updates &Once per: Specifies how often the new version check should be performed. Note that if you want to completely disable this check, just clear the above check box. Next Check: Check for: Choose this if you only wish to be notified about stable updates to VirtualBox. &Stable release versions Choose this if you wish to be notified about all new VirtualBox releases. &All new releases Choose this to be notified about all new VirtualBox releases and pre-release versions of VirtualBox. All new releases and &pre-releases UIHelpButton &Help &مساعدة UIHotKeyEditor Left يسار Right يمين Right Alt Left WinKey Right WinKey Menu key Alt Gr Caps Lock Scroll Lock <key_%1> F1 F1 F2 F2 F3 F3 F4 F4 F5 F5 F6 F6 F7 F7 F8 F8 F9 F9 F10 F10 F11 F11 F12 F12 F13 F13 F14 F14 F15 F15 F16 F16 F17 F17 F18 F18 F19 F19 F20 F20 F21 F21 F22 F22 F23 F23 F24 F24 None Left Shift Right Shift Left Ctrl Right Ctrl Left Alt UIImportApplianceWzd Appliance Import Wizard Cancel إلغاء Restore Defaults Import UIImportApplianceWzdPage1 Select an appliance to import Open Virtualization Format (%1) Welcome to the Appliance Import Wizard! This wizard will guide you through importing an appliance.%1VirtualBox currently supports importing appliances saved in the Open Virtualization Format (OVF). To continue, select the file to import below: UIImportApplianceWzdPage2 These are the virtual machines contained in the appliance and the suggested settings of the imported VirtualBox machines. You can change many of the properties shown by double-clicking on the items and disable others using the check boxes below. Appliance Import Settings UIImportLicenseViewer The virtual system "%1" requires that you agree to the terms and conditions of the software license agreement shown below. Click Agree to continue or click Disagree to cancel the import. Software License Agreement &Disagree &Agree &Print... &Save... Text (*.txt) Save license to file... UIIndicatorsPool Indicates the activity of the virtual hard disks:%1 HDD tooltip Indicates the activity of the CD/DVD devices:%1 CD/DVD tooltip Indicates the activity of the floppy devices:%1 FD tooltip Indicates the activity of the network interfaces:%1 Network adapters tooltip Adapter %1 (%2): %3 cable %4 Network adapters tooltip connected Network adapters tooltip disconnected Network adapters tooltip All network adapters are disabled Network adapters tooltip Indicates the activity of the attached USB devices:%1 USB device tooltip No USB devices attached USB device tooltip USB Controller is disabled USB device tooltip Indicates the activity of the machine's shared folders:%1 Shared folders tooltip No shared folders Shared folders tooltip %1: %2 Virtualization Stuff LED Indicates whether the host mouse pointer is captured by the guest OS: <img src=:/mouse_disabled_16px.png/>  pointer is not captured <img src=:/mouse_16px.png/>  pointer is captured <img src=:/mouse_seamless_16px.png/>  mouse integration (MI) is On <img src=:/mouse_can_seamless_16px.png/>  MI is Off, pointer is captured <img src=:/mouse_can_seamless_uncaptured_16px.png/>  MI is Off, pointer is not captured Note that the mouse integration feature requires Guest Additions to be installed in the guest OS. Indicates whether the keyboard is captured by the guest OS (<img src=:/hostkey_captured_16px.png/>) or not (<img src=:/hostkey_16px.png/>). Indicates whether the Remote Desktop Server is enabled (<img src=:/vrdp_16px.png/>) or not (<img src=:/vrdp_disabled_16px.png/>). <hr>The Remote Desktop Server is listening on port %1 Indicates the status of different features used by this virtual machine: %1: %2 %3: %4 %5: %6% Virtualization Stuff LED UILineTextEdit &Edit UIMachineLogic VirtualBox OSE فيرتول بوكس أوئِسئِي EXPERIMENTAL build %1r%2 - %3 Preview Monitor %1 Snapshot %1 لقطة %1 No CD/DVD Devices Attached No CD/DVD devices attached to that VM No Floppy Devices Attached No floppy devices attached to that VM No USB Devices Connected No supported devices connected to the host PC Select a filename for the screenshot ... UIMachineSettingsAudio When checked, a virtual PCI audio card will be plugged into the virtual machine and will communicate with the host audio system using the specified driver. Enable &Audio Host Audio &Driver: Controls the audio output driver. The Null Audio Driver makes the guest see an audio card, however every access to it will be ignored. Audio &Controller: Selects the type of the virtual sound card. Depending on this value, VirtualBox will provide different audio hardware to the virtual machine. UIMachineSettingsDisplay you have assigned less than %1 of video memory which is the minimum amount required to switch the virtual machine to fullscreen or seamless mode. <qt>%1 MB</qt> &Video Video &Memory: Controls the amount of video memory provided to the virtual machine. MB Extended Features: When checked, the virtual machine will be given access to the 3D graphics capabilities available on the host. Enable &3D Acceleration &Remote Display When checked, the VM will act as a Remote Desktop Protocol (RDP) server, allowing remote clients to connect and operate the VM (when it is running) using a standard RDP client. &Enable Server Server &Port: Authentication &Method: Defines the VRDP authentication method. Authentication &Timeout: Specifies the timeout for guest authentication, in milliseconds. you have assigned less than %1 of video memory which is the minimum amount required for HD Video to be played efficiently. When checked, the virtual machine will be given access to the Video Acceleration capabilities available on the host. Enable &2D Video Acceleration The VRDP Server port number. You may specify <tt>0</tt> (zero), to select port 3389, the standard port for RDP. Mo&nitor Count: Controls the amount of virtual monitors provided to the virtual machine. <qt>%1</qt> Specifies whether multiple simultaneous connections to the VM are permitted. &Allow Multiple Connections you have 3D Acceleration enabled for a operation system which uses the WDDM video driver. For maximal performance set the guest VRAM to at least %1. you have 2D Video Acceleration enabled. As 2D Video Acceleration is supported for Windows guests only, this feature will be disabled. you enabled 3D acceleration. However, 3D acceleration is not working on the current host setup so you will not be able to start the VM. UIMachineSettingsGeneral Displays the path where snapshots of this virtual machine will be stored. Be aware that snapshots can take quite a lot of disk space. &Basic &Name: Displays the name of the virtual machine. &Advanced Defines the boot device order. Use the checkboxes on the left to enable or disable individual boot devices. Move items up and down to change the device order. لتحدد تسلسل وسائل بدء التشغيل. إستخدم العلامات المتواجدة على اليسار لتفعيل أو تعطيل أحد وسائل بدء التشغيل. حرك إلى اﻷعلى و اﻷسفل لتغير تسلسل وسائل بدء التشغيل. Move Up (Ctrl-Up) حرك إلى اﻷعلى Move Down (Ctrl-Down) حرك إلى اﻷسفل &Shared Clipboard: Selects which clipboard data will be copied between the guest and the host OS. This feature requires Guest Additions to be installed in the guest OS. S&napshot Folder: Removable Media: &Remember Runtime Changes Mini ToolBar: If checked, show the Mini ToolBar in Fullscreen and Seamless modes. Show In &Fullscreen/Seamless &Description &وصف Displays the description of the virtual machine. The description field is useful for commenting on configuration details of the installed guest OS. If checked, any change to mounted CD/DVD or Floppy media performed during machine execution will be saved in the settings file in order to preserve the configuration of mounted media between runs. If checked, show the Mini ToolBar at the top of the screen, rather than in its default position at the bottom of the screen. Show At &Top Of Screen you have selected a 64-bit guest OS type for this VM. As such guests require hardware virtualization (VT-x/AMD-V), this feature will be enabled automatically. UIMachineSettingsNetwork no bridged network adapter is selected no internal network name is specified no host-only network adapter is selected Not selected network adapter name When checked, plugs this virtual network adapter into the virtual machine. &Enable Network Adapter Adapter &Type: Selects the type of the virtual network adapter. Depending on this value, VirtualBox will provide different network hardware to the virtual machine. &Attached to: Controls how this virtual adapter is attached to the real network of the Host OS. &Name: A&dvanced Shows or hides additional network adapter options. &Mac Address: Displays the MAC address of this adapter. It contains exactly 12 characters chosen from {0-9,A-F}. Note that the second character must be an even digit. Generates a new random MAC address. Indicates whether the virtual network cable is plugged in on machine startup or not. &Cable connected Opens dialog to manage port forwarding rules. &Port Forwarding &Promiscuous Mode: Selects the promiscuous mode policy of the network adapter when attached to an internal network, host only network or a bridge. Generic Properties: Enter any configuration settings here for the network attachment driver you will be using. The settings should be of the form name=value and will depend on the driver. Use shift-enter to add a new entry. no generic driver is selected Selects the network adapter on the host system that traffic to and from this network card will go through. Enter the name of the internal network that this network card will be connected to. You can create a new internal network by choosing a name which is not used by any other network cards in this virtual machine or others. Selects the virtual network adapter on the host system that traffic to and from this network card will go through. You can create and remove adapters using the global network settings in the virtual machine manager window. Selects the driver to be used with this network card. UIMachineSettingsParallel Port %1 parallel ports When checked, enables the given parallel port of the virtual machine. &Enable Parallel Port Port &Number: Displays the parallel port number. You can choose one of the standard parallel ports or select User-defined and specify port parameters manually. &IRQ: I/O Po&rt: Port &Path: Displays the host parallel device name. Displays the IRQ number of this parallel port. This should be a whole number between <tt>0</tt> and <tt>255</tt>. Values greater than <tt>15</tt> may only be used if the IO APIC setting is enabled for this virtual machine. Displays the base I/O port address of this parallel port. Valid values are integer numbers in range from <tt>0</tt> to <tt>0xFFFF</tt>. UIMachineSettingsParallelPage Duplicate port number selected Port path not specified Duplicate port path entered UIMachineSettingsPortForwardingDlg Port Forwarding Rules This table contains a list of port forwarding rules. Insert new rule Copy selected rule Delete selected rule This button adds new port forwarding rule. This button deletes selected port forwarding rule. UIMachineSettingsSF Adds a new shared folder definition. Edits the selected shared folder definition. Removes the selected shared folder definition. Machine Folders Transient Folders Full Read-only Lists all shared folders accessible to this machine. Use 'net use x: \\vboxsvr\share' to access a shared folder named share from a DOS-like OS, or 'mount -t vboxsf share mount_point' to access it from a Linux OS. This feature requires Guest Additions. Name إسم Path مسار Access &Add Shared Folder &Edit Shared Folder &Remove Shared Folder &Folders List Auto-Mount Yes نعم UIMachineSettingsSFDetails Add Share أضف مشاركة Edit Share عدل مشاركة Dialog Folder Path: Folder Name: Displays the name of the shared folder (as it will be seen by the guest OS). When checked, the guest OS will not be able to write to the specified shared folder. &Read-only &Make Permanent When checked, the guest OS will try to automatically mount the shared folder on startup. &Auto-mount If checked, this shared folder will be permanent. UIMachineSettingsSerial Port %1 serial ports When checked, enables the given serial port of the virtual machine. &Enable Serial Port Port &Number: Displays the serial port number. You can choose one of the standard serial ports or select User-defined and specify port parameters manually. &IRQ: I/O Po&rt: Port &Mode: Controls the working mode of this serial port. If you select Disconnected, the guest OS will detect the serial port but will not be able to operate it. If checked, the pipe specified in the Port Path field will be created by the virtual machine when it starts. Otherwise, the virtual machine will assume that the pipe exists and try to use it. &Create Pipe Port/File &Path: Displays the path to the serial port's pipe on the host when the port is working in Host Pipe mode, or the host serial device name when the port is working in Host Device mode. Displays the IRQ number of this serial port. This should be a whole number between <tt>0</tt> and <tt>255</tt>. Values greater than <tt>15</tt> may only be used if the IO APIC setting is enabled for this virtual machine. Displays the base I/O port address of this serial port. Valid values are integer numbers in range from <tt>0</tt> to <tt>0xFFFF</tt>. UIMachineSettingsSerialPage Duplicate port number selected Port path not specified Duplicate port path entered UIMachineSettingsStorage %1 Bus:  %2 Type:  %3 Expand/Collapse Item Add Hard Disk Add CD/DVD Device Add Floppy Device %1 uses a medium that is already attached to %2. Add Controller Add IDE Controller Add SATA Controller Add SCSI Controller Add Floppy Controller Remove Controller Add Attachment Add Hard Disk Add CD/DVD Device Add Floppy Device Remove Attachment Adds a new controller to the end of the Storage Tree. Removes the controller highlighted in the Storage Tree. Adds a new attachment to the Storage Tree using currently selected controller as parent. Removes the attachment highlighted in the Storage Tree. IDE Controller SATA Controller SCSI Controller Floppy Controller Hard &Disk: &Storage Tree Contains all storage controllers for this machine and the virtual images and host drives attached to them. Information The Storage Tree can contain several controllers of different types. This machine currently has no controllers. Attributes &Name: Changes the name of the storage controller currently selected in the Storage Tree. &Type: Selects the sub-type of the storage controller currently selected in the Storage Tree. Selects the slot on the storage controller used by this attachment. The available slots depend on the type of the controller and other attachments on it. When checked, allows the guest to send ATAPI commands directly to the host-drive which makes it possible to use CD/DVD writers connected to the host inside the VM. Note that writing audio CD inside the VM is not yet supported. &Passthrough Virtual Size: Actual Size: Size: Location: Type (Format): Attached To: Allows to use host I/O caching capabilities. Use host I/O cache Add SAS Controller SAS Controller Type: Host Drive Image Choose or create a virtual hard disk file. The virtual machine will see the data in the file as the contents of the virtual hard disk. Set up the virtual hard disk CD/DVD &Drive: Choose a virtual CD/DVD disk or a physical drive to use with the virtual drive. The virtual machine will see a disk inserted into the drive with the data in the file or on the disk in the physical drive as its contents. Set up the virtual CD/DVD drive Floppy &Drive: Choose a virtual floppy disk or a physical drive to use with the virtual drive. The virtual machine will see a disk inserted into the drive with the data in the file or on the disk in the physical drive as its contents. Set up the virtual floppy drive Create a new hard disk... Choose a virtual hard disk file... Choose a virtual CD/DVD disk file... Remove disk from virtual drive Choose a virtual floppy disk file... When checked the virtual disk will not be removed when the guest system ejects it. &Live CD/DVD When checked the guest system will see the virtual disk as a solid state device. &Solid-state drive Details: no name specified for controller at position %1. controller at position %1 uses the name that is already used by controller at position %2. no hard disk is selected for %1. at most one supported controller up to %1 supported controllers you are currently using more storage controllers than a %1 chipset supports. Please change the chipset type on the System settings page or reduce the number of the following storage controllers on the Storage settings page: %2. &Port Count: Selects the port count of the SATA storage controller currently selected in the Storage Tree. This must be at least one more than the highest port number you need to use. UIMachineSettingsSystem you have assigned more than %1% of your computer's memory (%2) to the virtual machine. Not enough memory is left for your host operating system. Please select a smaller amount. you have assigned more than %1% of your computer's memory (%2) to the virtual machine. There might not be enough memory left for your host operating system. Continue at your own risk. for performance reasons, the number of virtual CPUs attached to the virtual machine may not be more than twice the number of physical CPUs on the host (%1). Please reduce the number of virtual CPUs. you have assigned more virtual CPUs to the virtual machine than the number of physical CPUs on your host system (%1). This is likely to degrade the performance of your virtual machine. Please consider reducing the number of virtual CPUs. you have assigned more than one virtual CPU to this VM. This will not work unless the IO-APIC feature is also enabled. This will be done automatically when you accept the VM Settings by pressing the OK button. you have assigned more than one virtual CPU to this VM. This will not work unless hardware virtualization (VT-x/AMD-V) is also enabled. This will be done automatically when you accept the VM Settings by pressing the OK button. <qt>%1 MB</qt> <qt>%1 CPU</qt> %1 is 1 for now &Motherboard Base &Memory: Controls the amount of memory provided to the virtual machine. If you assign too much, the machine might not start. MB &Boot Order: Defines the boot device order. Use the checkboxes on the left to enable or disable individual boot devices. Move items up and down to change the device order. لتحدد تسلسل وسائل بدء التشغيل. إستخدم العلامات المتواجدة على اليسار لتفعيل أو تعطيل أحد وسائل بدء التشغيل. حرك إلى اﻷعلى و اﻷسفل لتغير تسلسل وسائل بدء التشغيل. Move Down (Ctrl-Down) حرك إلى اﻷسفل Moves the selected boot device down. Move Up (Ctrl-Up) حرك إلى اﻷعلى Moves the selected boot device up. Extended Features: When checked, the virtual machine will support the Input Output APIC (IO APIC), which may slightly decrease performance. Note: don't disable this feature after having installed a Windows guest operating system! Enable &IO APIC &Processor &Processor(s): When checked, the Physical Address Extension (PAE) feature of the host CPU will be exposed to the virtual machine. Enable PA&E/NX Acce&leration Hardware Virtualization: When checked, the virtual machine will try to make use of the host CPU's hardware virtualization extensions such as Intel VT-x and AMD-V. Enable &VT-x/AMD-V When checked, the virtual machine will try to make use of the nested paging extension of Intel VT-x and AMD-V. Enable Nested Pa&ging <qt>%1 CPUs</qt> %1 is host cpu count * 2 for now When checked, the guest will support the Extended Firmware Interface (EFI), which is required to boot certain guest OSes. Non-EFI aware OSes will not be able to boot if this option is activated. Enable &EFI (special OSes only) If checked, the RTC device will report the time in UTC, otherwise in local (host) time. Unix usually expects the hardware clock to be set to UTC. Hardware clock in &UTC time Controls the number of virtual CPUs in the virtual machine. You need hardware virtualization support on your host system to use more than one virtual CPU. If checked, an absolute pointing device (a USB tablet) will be supported. Otherwise, only a standard PS/2 mouse will be emulated. Enable &absolute pointing device &Chipset: Selects the chipset to be emulated in this virtual machine. Note that the ICH9 chipset emulation is experimental and not recommended except for guest systems (such as Mac OS X) which require it. &Execution Cap: Limits the amount of time that each virtual CPU is allowed to run for. Each virtual CPU will be allowed to use up to this percentage of the processing time available on one physical CPU. The execution cap can be disabled by setting it to 100%. Setting the cap too low can make the machine feel slow to respond. you have set the processor execution cap to a low value. This can make the machine feel slow to respond. you have enabled a USB HID (Human Interface Device). This will not work unless USB emulation is also enabled. This will be done automatically when you accept the VM Settings by pressing the OK button. <qt>%1%</qt> Min CPU execution cap in % <qt>%1%</qt> Max CPU execution cap in % you have assigned ICH9 chipset type to this VM. It will not work properly unless the IO-APIC feature is also enabled. This will be done automatically when you accept the VM Settings by pressing the OK button. UIMachineSettingsUSB &Add Empty Filter A&dd Filter From Device &Edit Filter &Remove Filter &Move Filter Up M&ove Filter Down Adds a new USB filter with all fields initially set to empty strings. Note that such a filter will match any attached USB device. Adds a new USB filter with all fields set to the values of the selected USB device attached to the host PC. Edits the selected USB filter. Removes the selected USB filter. Moves the selected USB filter up. Moves the selected USB filter down. New Filter %1 usb When checked, enables the virtual USB controller of this machine. Enable &USB Controller When checked, enables the virtual USB EHCI controller of this machine. The USB EHCI controller provides USB 2.0 support. Enable USB 2.0 (E&HCI) Controller USB Device &Filters Lists all USB filters of this machine. The checkbox to the left defines whether the particular filter is enabled or not. Use the context menu or buttons to the right to add or remove USB filters. [filter] Vendor ID: %1 USB filter tooltip Product ID: %2 USB filter tooltip Revision: %3 USB filter tooltip Product: %4 USB filter tooltip Manufacturer: %5 USB filter tooltip Serial No.: %1 USB filter tooltip Port: %1 USB filter tooltip State: %1 USB filter tooltip USB 2.0 is currently enabled for this virtual machine. However, this requires the %1 to be installed. Please install the Extension Pack from the VirtualBox download site. After this you will be able to re-enable USB 2.0. It will be disabled in the meantime unless you cancel the current settings changes. UIMachineSettingsUSBFilterDetails Any remote أي Yes remote نعم No remote لا &Name: Displays the filter name. &Vendor ID: Defines the vendor ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value. &Product ID: Defines the product ID filter. The exact match string format is <tt>XXXX</tt> where <tt>X</tt> is a hexadecimal digit. An empty string will match any value. &Revision: Defines the revision number filter. The exact match string format is <tt>IIFF</tt> where <tt>I</tt> is a decimal digit of the integer part and <tt>F</tt> is a decimal digit of the fractional part. An empty string will match any value. &Manufacturer: Defines the manufacturer filter as an exact match string. An empty string will match any value. Pro&duct: Defines the product name filter as an exact match string. An empty string will match any value. &Serial No.: Defines the serial number filter as an exact match string. An empty string will match any value. Por&t: Defines the host USB port filter as an exact match string. An empty string will match any value. R&emote: Defines whether this filter applies to USB devices attached locally to the host computer (No), to a VRDP client's computer (Yes), or both (Any). &Action: Defines an action performed by the host computer when a matching device is attached: give it up to the host OS (Ignore) or grab it for later usage by virtual machines (Hold). USB Filter Details UIMachineWindowNormal Shows the currently assigned Host key. This key, when pressed alone, toggles the keyboard and mouse capture state. It can also be used in combination with other keys to quickly perform actions from the main menu. UIMediumTypeChangeDialog Modify medium attributes You are about to change the attributes of the virtual disk located in %1.Please choose one of the following medium types and press %2 to proceed or %3 otherwise. Choose medium type: UIMessageCenter VirtualBox - Information msg box title VirtualBox - Question msg box title VirtualBox - Warning msg box title VirtualBox - Error msg box title VirtualBox - Critical Error msg box title Do not show this message again msg box flag The following files already exist: %1 Are you sure you want to replace them? Replacing them will overwrite their contents. You are running a prerelease version of VirtualBox. This version is not suitable for production use. Failed to open <tt>%1</tt>. Make sure your desktop environment can properly handle URLs of this type. Failed to initialize COM or to find the VirtualBox COM server. Most likely, the VirtualBox server is not running or failed to start.The application will now terminate. Failed to create the VirtualBox COM object.The application will now terminate. Failed to set global VirtualBox properties. Failed to access the USB subsystem. Failed to create a new virtual machine. Failed to create a new virtual machine %1. Failed to apply the settings to the virtual machine %1. Failed to start the virtual machine %1. Failed to pause the execution of the virtual machine %1. Failed to resume the execution of the virtual machine %1. Failed to save the state of the virtual machine %1. Failed to create a snapshot of the virtual machine %1. Failed to stop the virtual machine %1. Failed to remove the virtual machine %1. Failed to discard the saved state of the virtual machine %1. You are trying to shut down the guest with the ACPI power button. This is currently not possible because the guest does not support software shutdown. VT-x/AMD-V hardware acceleration has been enabled, but is not operational. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot.Please ensure that you have enabled VT-x/AMD-V properly in the BIOS of your host computer. Close VM Continue VT-x/AMD-V hardware acceleration has been enabled, but is not operational. Certain guests (e.g. OS/2 and QNX) require this feature.Please ensure that you have enabled VT-x/AMD-V properly in the BIOS of your host computer. Discard إلغاء Cancel إلغاء There is no virtual machine named %1. Are you sure you want to discard the saved state of the virtual machine %1?This operation is equivalent to resetting or powering off the machine without doing a proper shutdown of the guest OS. Failed to create a new session. Failed to open a session for the virtual machine %1. Failed to create the host-only network interface. Failed to attach the USB device %1 to the virtual machine %2. Failed to detach the USB device %1 from the virtual machine %2. Failed to create the shared folder %1 (pointing to %2) for the virtual machine %3. Failed to remove the shared folder %1 (pointing to %2) from the virtual machine %3. Invalid e-mail address or password specified. Failed to register the VirtualBox product.%1 The Virtual Machine reports that the guest OS does not support mouse pointer integration in the current video mode. You need to capture the mouse (by clicking over the VM display or pressing the host key) in order to use the mouse inside the guest OS. The Virtual Machine is currently in the Paused state and not able to see any keyboard or mouse input. If you want to continue to work inside the VM, you need to resume it by selecting the corresponding action from the menu bar. Your existing VirtualBox settings files will be automatically converted from the old format to a new format required by the new version of VirtualBox.Press OK to start VirtualBox now or press Exit if you want to terminate the VirtualBox application without any further actions. Cannot run VirtualBox in VM Selector mode due to local restrictions.The application will now terminate. Failed to open appliance. Failed to open/interpret appliance %1. Failed to import appliance %1. Failed to check files. Failed to remove file. Failed to create appliance. Failed to prepare the export of the appliance %1. Failed to create an appliance. Failed to export appliance %1. Fatal Error runtime error info Non-Fatal Error runtime error info Warning runtime error info Error ID: runtime error info Severity: runtime error info A fatal error has occurred during virtual machine execution! The virtual machine will be powered off. Please copy the following error message using the clipboard to help diagnose the problem: An error has occurred during virtual machine execution! The error details are shown below. You may try to correct the error and resume the virtual machine execution. The virtual machine execution may run into an error condition as described below. We suggest that you take an appropriate action to avert the error. Result Code: error info Component: error info Interface: error info Callee: error info Callee RC: error info Could not find a language file for the language %1 in the directory %2.The language will be temporarily reset to the system default language. Please go to the Preferences dialog which you can open from the File menu of the main VirtualBox window, and select one of the existing languages on the Language page. Could not load the language file %1. The language will be temporarily reset to English (built-in). Please go to the Preferences dialog which you can open from the File menu of the main VirtualBox window, and select one of the existing languages on the Language page. Failed to remove the host network interface %1. Failed to remove the shared folder %1 (pointing to %2) from the virtual machine %3.Please close all programs in the guest OS that may be using this shared folder and try again. Could not find the VirtualBox Guest Additions CD image file %1 or %2.Do you wish to download this CD image from the Internet? Are you sure you want to download the VirtualBox Guest Additions CD image from <a href="%1">%2</a> (size %3 bytes)? The VirtualBox Guest Additions CD image has been successfully downloaded from <a href="%1">%2</a> and saved locally as %3.Do you wish to register this CD image and mount it on the virtual CD/DVD drive? The virtual machine window is optimized to work in %1 bit color mode but the virtual display is currently set to %2 bit.Please open the display properties dialog of the guest OS and select a %3 bit color mode, if it is available, for best possible performance of the virtual video subsystem.Note. Some operating systems, like OS/2, may actually work in 32 bit mode but report it as 24 bit (16 million colors). You may try to select a different color mode to see if this message disappears or you can simply disable the message now if you are sure the required color mode (%4 bit) is not available in the guest OS. You didn't attach a hard disk to the new virtual machine. The machine will not be able to boot unless you attach a hard disk with a guest operating system or some other bootable media to it later using the machine settings dialog or the First Run Wizard.Do you wish to continue? Failed to find license files in %1. Failed to open the license file %1. Check file permissions. Failed to send the ACPI Power Button press event to the virtual machine %1. Congratulations! You have been successfully registered as a user of VirtualBox.Thank you for finding time to fill out the registration form! Failed to load the global GUI configuration from %1.The application will now terminate. Failed to save the global GUI configuration to %1.The application will now terminate. Failed to save the settings of the virtual machine %1 to %2. Failed to load the settings of the virtual machine %1 from %2. Delete machine حذف Discard saved state إلغاء Delete hard disk حذف Disable hard disk عطِل Download additions Mount additions The host key is currently defined as %1. additional message box paragraph Capture do input capture Check inaccessible media message box Cancel warnAboutAutoConvertedSettings message box إلغاء Switch fullscreen Switch seamless Do you really want to reset the virtual machine?This will cause any unsaved data in applications running inside it to be lost. Reset machine Continue no hard disk attached Go Back no hard disk attached Select hard disk حدِد Could not enter seamless mode due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory. Could not switch the guest display to fullscreen mode due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory.Press Ignore to switch to fullscreen mode anyway or press Cancel to cancel the operation. You are already running the most recent version of VirtualBox. You have clicked the mouse inside the Virtual Machine display or pressed the host key. This will cause the Virtual Machine to capture the host mouse pointer (only if the mouse pointer integration is not currently supported by the guest OS) and the keyboard, which will make them unavailable to other applications running on your host machine.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=:/hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. You have the Auto capture keyboard option turned on. This will cause the Virtual Machine to automatically capture the keyboard every time the VM window is activated and make it unavailable to other applications running on your host machine: when the keyboard is captured, all keystrokes (including system ones like Alt-Tab) will be directed to the VM.You can press the host key at any time to uncapture the keyboard and mouse (if it is captured) and return them to normal operation. The currently assigned host key is shown on the status bar at the bottom of the Virtual Machine window, next to the <img src=:/hostkey_16px.png/> icon. This icon, together with the mouse icon placed nearby, indicate the current keyboard and mouse capture state. The Virtual Machine reports that the guest OS supports mouse pointer integration. This means that you do not need to capture the mouse pointer to be able to use it in your guest OS -- all mouse actions you perform when the mouse pointer is over the Virtual Machine's display are directly sent to the guest OS. If the mouse is currently captured, it will be automatically uncaptured.The mouse icon on the status bar will look like <img src=:/mouse_seamless_16px.png/> to inform you that mouse pointer integration is supported by the guest OS and is currently turned on.Note: Some applications may behave incorrectly in mouse pointer integration mode. You can always disable it for the current session (and enable it again) by selecting the corresponding action from the menu bar. &Contents... &محتويات... Show the online help contents &VirtualBox Web Site... Open the browser and go to the VirtualBox product web site &Reset All Warnings Go back to showing all suppressed warnings and messages R&egister VirtualBox... Open VirtualBox registration form C&heck for Updates... Check for a new VirtualBox version &About VirtualBox... Show a dialog with product information A new version of VirtualBox has been released! Version %1 is available at <a href="http://www.virtualbox.org/">virtualbox.org</a>.You can download this version using the link:<a href=%2>%3</a> Are you sure you want to release the %1 %2?This will detach it from the following virtual machine(s): %3. A file named %1 already exists. Are you sure you want to replace it? Replacing it will overwrite its contents. Release detach medium Are you sure you want to remove the %1 %2 from the list of known media? Note that as this hard disk is inaccessible its storage unit cannot be deleted right now. The next dialog will let you choose whether you also want to delete the storage unit of this hard disk or keep it for later usage. Remove medium أزل The hard disk storage unit at location %1 already exists. You cannot create a new virtual hard disk that uses this location because it can be already used by another virtual hard disk.Please specify a different location. Do you want to delete the storage unit of the hard disk %1?If you select Delete then the specified storage unit will be permanently deleted. This operation cannot be undone.If you select Keep then the hard disk will be only removed from the list of known hard disks, but the storage unit will be left untouched which makes it possible to add this hard disk to the list later again. Delete hard disk storage حذف Keep hard disk storage Failed to delete the storage unit of the hard disk %1. Failed to create the hard disk storage %1. Failed to open the %1 %2. Failed to close the %1 %2. Failed to determine the accessibility state of the medium %1. Deleting this host-only network will remove the host-only interface this network is based on. Do you want to remove the (host-only network) interface %1?Note: this interface may be in use by one or more virtual network adapters belonging to one of your VMs. After it is removed, these adapters will no longer be usable until you correct their settings by either choosing a different interface name or a different adapter attachment type. Failed to connect to the VirtualBox online registration service due to the following error:%1 One or more virtual hard disks, CD/DVD or floppy media are not currently accessible. As a result, you will not be able to operate virtual machines that use these media until they become accessible later.Press Check to open the Virtual Media Manager window and see what media are inaccessible, or press Ignore to ignore this message. E&xit warnAboutAutoConvertedSettings message box خ&روج A critical error has occurred while running the virtual machine and the machine execution has been stopped.For help, please see the Community section on <a href=http://www.virtualbox.org>http://www.virtualbox.org</a> or your support contract. Please provide the contents of the log file <tt>VBox.log</tt> and the image file <tt>VBox.png</tt>, which you can find in the %1 directory, as well as a description of what you were doing when this error happened. Note that you can also access the above files by selecting Show Log from the Machine menu of the main VirtualBox window.Press OK if you want to power off the machine or press Ignore if you want to leave it as is for debugging. Please note that debugging requires special knowledge and tools, so it is recommended to press OK now. You seem to have the USBFS filesystem mounted at /sys/bus/usb/drivers. We strongly recommend that you change this, as it is a severe mis-configuration of your system which could cause USB devices to fail in unexpected ways. You are running an EXPERIMENTAL build of VirtualBox. This version is not suitable for production use. Restore Deleting the snapshot will cause the state information saved in it to be lost, and disk data spread over several image files that VirtualBox has created together with the snapshot will be merged into one file. This can be a lengthy process, and the information in the snapshot cannot be recovered.Are you sure you want to delete the selected snapshot %1? Delete حذف Failed to restore the snapshot %1 of the virtual machine %2. Failed to delete the snapshot %1 of the virtual machine %2. &Select medium &حدِد Unable to mount the %1 %2 on the machine %3. Would you like to force mounting of this medium? Unable to unmount the %1 %2 from the machine %3. Would you like to force unmounting of this medium? Force Unmount Could not insert the VirtualBox Guest Additions installer CD image into the virtual machine %1, as the machine has no CD/DVD-ROM drives. Please add a drive using the storage page of the virtual machine settings dialog. E&xit warnAboutSettingsAutoConversion message box خ&روج The following VirtualBox settings files will be automatically converted from the old format to a new format required by the new version of VirtualBox.Press OK to start VirtualBox now or press Exit if you want to terminate the VirtualBox application without any further actions. hard disk failed to mount ... CD/DVD failed to mount ... host-drive CD/DVD image failed to mount ... floppy failed to mount ... host-drive floppy image failed to mount ... Are you sure you want to delete the CD/DVD-ROM device?You will not be able to mount any CDs or ISO images or install the Guest Additions without it! &Remove medium VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it. Deleting the snapshot %1 will temporarily need more disk space. In the worst case the size of image %2 will grow by %3, however on this filesystem there is only %4 free.Running out of disk space during the merge operation can result in corruption of the image and the VM configuration, i.e. loss of the VM and its data.You may continue with deleting the snapshot at your own risk. Could not change the guest screen to this host screen due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory. Could not change the guest screen to this host screen due to insufficient guest video memory.You should configure the virtual machine to have at least %1 of video memory.Press Ignore to switch the screen anyway or press Cancel to cancel the operation. Can not switch the guest display to fullscreen mode. You have more virtual screens configured than physical screens are attached to your host.Please either lower the virtual screens in your VM configuration or attach additional screens to your host. Can not switch the guest display to seamless mode. You have more virtual screens configured than physical screens are attached to your host.Please either lower the virtual screens in your VM configuration or attach additional screens to your host. Could not find the VirtualBox User Manual %1.Do you wish to download this file from the Internet? Are you sure you want to download the VirtualBox User Manual from <a href="%1">%2</a> (size %3 bytes)? The VirtualBox User Manual has been successfully downloaded from <a href="%1">%2</a> and saved locally as %3. The VirtualBox User Manual has been successfully downloaded from <a href="%1">%2</a> but can't be saved locally as %3.Please choose another location for that file. Failed to open virtual machine located in %1. Failed to add virtual machine %1 located in %2 because its already present. Delete all files Remove only Remove أزل You are about to add a virtual hard disk to controller %1.Would you like to create a new, empty file to hold the disk contents or select an existing one? Create &new disk add attachment routine &Choose existing disk add attachment routine You are about to add a new CD/DVD drive to controller %1.Would you like to choose a virtual CD/DVD disk to put in the drive or to leave it empty for now? &Choose disk add attachment routine Leave &empty add attachment routine You are about to add a new floppy drive to controller %1.Would you like to choose a virtual floppy disk to put in the drive or to leave it empty for now? Failed to detach the hard disk (%1) from the slot %2 of the machine %3. Failed to detach the CD/DVD device (%1) from the slot %2 of the machine %3. Failed to detach the floppy device (%1) from the slot %2 of the machine %3. The virtual machine(s) %1 are currently in a saved state.If you continue the runtime state of the exported machine(s) will be discarded. Note that the existing machine(s) are not changed. Failed to update Guest Additions. The Guest Additions installation image will be mounted to provide a manual installation. Failed to install the Extension Pack %1. Failed to uninstall the Extension Pack %1. &Remove The current port forwarding rules are not valid. None of the host or guest port values may be set to zero. There are unsaved changes in the port forwarding configuration.If you proceed your changes will be discarded. Failed to attach the hard disk (%1) to the slot %2 of the machine %3. Failed to attach the CD/DVD device (%1) to the slot %2 of the machine %3. Failed to attach the floppy device (%1) to the slot %2 of the machine %3. Note that the storage unit of this medium will not be deleted and that it will be possible to use it later again. The VirtualBox Guest Additions do not appear to be available on this virtual machine, and shared folders cannot be used without them. To use shared folders inside the virtual machine, please install the Guest Additions if they are not installed, or re-install them if they are not working correctly, by selecting Install Guest Additions from the Devices menu. If they are installed but the machine is not yet fully started then shared folders will be available once it is. The virtual machine window will be now switched to fullscreen mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in fullscreen mode. You can access it by pressing Host+Home. The virtual machine window will be now switched to Seamless mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in seamless mode. You can access it by pressing Host+Home. The virtual machine window will be now switched to Scale mode. You can go back to windowed mode at any time by pressing %1.Note that the Host key is currently defined as %2.Note that the main menu bar is hidden in scale mode. You can access it by pressing Host+Home. Switch scale Failed to open the Extension Pack %1. You are about to install a VirtualBox extension pack. Extension packs complement the functionality of VirtualBox and can contain system level software that could be potentially harmful to your system. Please review the description below and only proceed if you have obtained the extension pack from a trusted source.<table cellpadding=0 cellspacing=0><tr><td>Name:  </td><td>%1</td></tr><tr><td>Version:  </td><td>%2</td></tr><tr><td>Description:  </td><td>%3</td></tr></table> &Install Extension packs complement the functionality of VirtualBox and can contain system level software that could be potentially harmful to your system. Please review the description below and only proceed if you have obtained the extension pack from a trusted source. An older version of the extension pack is already installed, would you like to upgrade? %1<table cellpadding=0 cellspacing=0><tr><td>Name:  </td><td>%2</td></tr><tr><td>New Version:  </td><td>%3</td></tr><tr><td>Current Version:  </td><td>%4</td></tr><tr><td>Description:  </td><td>%5</td></tr></table> &Upgrade An newer version of the extension pack is already installed, would you like to downgrade? %1<table cellpadding=0 cellspacing=0><tr><td>Name:  </td><td>%2</td></tr><tr><td>New Version:  </td><td>%3</td></tr><tr><td>Current Version:  </td><td>%4</td></tr><tr><td>Description:  </td><td>%5</td></tr></table> &Downgrade The extension pack is already installed with the same version, would you like reinstall it? %1<table cellpadding=0 cellspacing=0><tr><td>Name:  </td><td>%2</td></tr><tr><td>Version:  </td><td>%3</td></tr><tr><td>Description:  </td><td>%4</td></tr></table> &Reinstall You are about to remove the VirtualBox extension pack %1.Are you sure you want to proceed? The extension pack %1 was installed successfully. Cannot create the machine folder %1 in the parent folder %2.Please check that the parent really exists and that you have permissions to create the machine folder. Failed to register the virtual machine %1. The machine settings were changed while you were editing them. You currently have unsaved setting changes.Would you like to reload the changed settings or to keep your own changes? Reload settings Keep changes The virtual machine that you are changing has been started. Only certain settings can be changed while a machine is running. All other changes will be lost if you close this window now. Failed to clone the virtual machine %1. You are about to restore snapshot %1.You can create a snapshot of the current state of the virtual machine first by checking the box below; if you do not do this the current state will be permanently lost. Do you wish to proceed? Create a snapshot of the current machine state Are you sure you want to restore snapshot %1? Error changing medium type from %1 to %2. Sorry, some generic error happens. USB 2.0 is currently enabled for this virtual machine. However, this requires the %1 to be installed.Please install the Extension Pack from the VirtualBox download site. After this you will be able to re-enable USB 2.0. It will be disabled in the meantime unless you cancel the current settings changes. Could not load the Host USB Proxy Service (VERR_FILE_NOT_FOUND). The service might not be installed on the host computer VirtualBox is not currently allowed to access USB devices. You can change this by adding your user to the 'vboxusers' group. Please see the user manual for a more detailed explanation VirtualBox is not currently allowed to access USB devices. You can change this by allowing your user to access the 'usbfs' folder and files. Please see the user manual for a more detailed explanation The USB Proxy Service has not yet been ported to this host Could not load the Host USB Proxy service Can't find snapshot named %1. Failed to save the downloaded file as %1. You have an old version (%1) of the %2 installed.Do you wish to download latest one from the Internet? Download extension pack Are you sure you want to download the %1 from <a href="%2">%2</a> (size %3 bytes)? The %1 has been successfully downloaded from <a href="%2">%2</a> and saved locally as %3.Do you wish to install this extension pack? Install extension pack The %1 has been successfully downloaded from <a href="%2">%2</a> but can't be saved locally as %3.Please choose another location for that file. Network Operations Manager... Show Network Operations Manager You are about to remove following inaccessible virtual machines from the machine list:%1Do you wish to proceed? You are about to remove following virtual machines from the machine list:%1Would you like to delete the files containing the virtual machine from your hard disk as well? Doing this will also remove the files containing the machine's virtual hard disks if they are not in use by another machine. You are about to remove following virtual machines from the machine list:%1Would you like to delete the files containing the virtual machine from your hard disk as well? You have version %1 of the %2 installed.You should download and install version %3 of this extension pack from Oracle! Ok extension pack Do you wish to cancel all current network operations? Do you wish to cancel all current network operations or leave them running in the background? Cancel All Leave in Background Do you really want to send an ACPI shutdown signal to the virtual machine? ACPI Shutdown machine Do you really want to power off the virtual machine?This will cause any unsaved data in applications running inside it to be lost. Power Off machine Failed to drop data. UIMiniProcessWidgetAdditions Cancel إلغاء UIMiniProcessWidgetUserManual Cancel إلغاء Cancel the VirtualBox User Manual download Downloading the VirtualBox User Manual Downloading the VirtualBox User Manual %1... UIMiniProgressWidgetAdditions Cancel the VirtualBox Guest Additions CD image download Downloading the VirtualBox Guest Additions CD image from %1... UIMiniProgressWidgetExtension Cancel the %1 download Downloading the %1 from %2... UIMultiScreenLayout Virtual Screen %1 Use Host Screen %1 UINetworkManager Network Operation Restart network operation Cancel network operation Error: %1. Network Operations Manager There are no active network operations. &Cancel All Cancel all active network operations UINewHDWizard Create New Virtual Disk Alt+D Alt+D Alt+F Alt+F Select حدِد Cancel إلغاء %1_copy copied virtual disk name Create Copy Virtual Disk Copy Welcome to the virtual disk copying wizard This wizard will help you to copy a virtual disk. Please select the virtual disk which you would like to copy if it is not already selected. You can either choose one from the list or use the folder icon beside the list to select a virtual disk file. &VDI (VirtualBox Disk Image) V&MDK (Virtual Machine Disk) V&HD (Virtual Hard Disk) Welcome to the virtual disk creation wizard This wizard will help you to create a new virtual disk for your virtual machine. Please choose the type of file that you would like to use for the new virtual disk. If you do not need to use it with other virtualization software you can leave this setting unchanged. Virtual disk file type Please choose the type of file that you would like to use for the new virtual disk. If you do not need to use it with other virtualization software you can leave this setting unchanged. Virtual disk storage details Please choose whether the new virtual disk file should be allocated as it is used or if it should be created fully allocated. A dynamically allocated virtual disk file will only use space on your physical hard disk as it fills up (up to a fixed maximum size), although it will not shrink again automatically when space on it is freed. A fixed size virtual disk file may take longer to create on some systems but is often faster to use. You can also choose to split the virtual disk into several files of up to two gigabytes each. This is mainly useful if you wish to store the virtual machine on removable USB devices or old systems, some of which cannot handle very large files. &Dynamically allocated &Fixed size &Split into files of less than 2GB Virtual disk file location and size Select the size of the virtual disk in megabytes. This size will be reported to the Guest OS as the maximum size of this virtual disk. Virtual disk file location Please type the name of the new virtual disk file into the box below or click on the folder icon to select a different folder to create the file in. Select a file for the new hard disk image file %1 (%2 B) Summary You are going to create a new virtual disk with the following parameters: You are going to create a copied virtual disk with the following parameters: If the above settings are correct, press the %1 button. Once you press it the new virtual disk file will be created. %1 B File type summary Details summary Location summary Size summary H&DD (Parallels Hard Disk) Q&ED (QEMU enhanced disk) &QCOW (QEMU Copy-On-Write) UINewHDWizardPageFormat File type UINewHDWizardPageOptions &Location &Size UINewHDWizardPageVariant Storage details UINewHDWizardPageWelcome Virtual disk to copy Choose a virtual hard disk file... UINewVMWzd Create New Virtual Machine Name summary إسم Cancel إلغاء Create UINewVMWzdPage1 Welcome to the New Virtual Machine Wizard! This wizard will guide you through the steps that are necessary to create a new virtual machine for VirtualBox.%1 UINewVMWzdPage2 Enter a name for the new virtual machine and select the type of the guest operating system you plan to install onto the virtual machine.The name of the virtual machine usually indicates its software and hardware configuration. It will be used by all VirtualBox components to identify your virtual machine. N&ame OS &Type VM Name and OS Type UINewVMWzdPage3 Select the amount of base memory (RAM) in megabytes to be allocated to the virtual machine. Base &Memory Size MB Memory The recommended base memory size is %1 MB. UINewVMWzdPage4 &Create new hard disk &Use existing hard disk Virtual Hard Disk Start-up &Disk If you wish you can now add a start-up disk to the new machine. You can either create a new virtual disk or select one from the list or from another location using the folder icon.If you need a more complex virtual disk setup you can skip this step and make the changes to the machine settings once the machine is created. Choose a virtual hard disk file... The recommended size of the start-up disk is %1. UINewVMWzdPage5 You are going to create a new virtual machine with the following parameters: Summary Name summary إسم OS Type summary Base Memory summary Start-up Disk summary If the above is correct press the %1 button. Once you press it, a new virtual machine will be created. Note that you can alter these and all other setting of the created virtual machine at any time using the Settings dialog accessible through the menu of the main window. UIPortForwardingModel Name إسم Protocol Host IP Host Port Guest IP Guest Port UIProgressDialog A few seconds remaining Canceling... &Cancel Cancel the current operation %1, %2 remaining You may wish to translate this more like "Time remaining: %1, %2" %1 remaining You may wish to translate this more like "Time remaining: %1" UISelectorWindow Show Toolbar Show Statusbar Select a virtual machine file Virtual machine files (%1) <h3>Welcome to VirtualBox!</h3>The left part of this window is a list of all virtual machines on your computer. The list is empty now because you haven't created any virtual machines yet.<img src=:/welcome.png align=right/>In order to create a new virtual machine, press the New button in the main tool bar located at the top of the window.You can press the %1 key to get instant help, or visit <a href=http://www.virtualbox.org>www.virtualbox.org</a> for the latest information and news. Manager Note: main window title which is pretended by the product name. UISession Install UISettingsDialog Select a settings category from the list on the left-hand side and move the mouse over a settings item to get more information. On the %1 page, %2 Invalid settings detected Non-optimal settings detected Settings UISettingsDialogGlobal General Input Update Language لغة USB Network Extensions VirtualBox - %1 Proxy Display UISettingsDialogMachine General System Display Storage Audio Network Ports Serial Ports Parallel Ports USB Shared Folders %1 - %2 UITextEditor Edit text &Replace... Replaces the current text with the content of a file. Text (*.txt);;All (*.*) Select a file to open... UIUpdateManager 1 day 2 days 3 days 4 days 5 days 6 days 1 week 2 weeks 3 weeks 1 month Never Cancel إلغاء UIUpdateStepVirtualBox Checking for a new VirtualBox version... UIVMCloseDialog Close Virtual Machine أغلق اﻷلة الواقعية You want to: أنت تريد أن : Saves the current execution state of the virtual machine to the physical hard disk of the host PC.Next time this machine is started, it will be restored from the saved state and continue execution from the same place you saved it at, which will let you continue your work immediately.Note that saving the machine state may take a long time, depending on the guest operating system type and the amount of memory you assigned to the virtual machine. &Save the machine state &حفظ حالة اﻷلة الواقعية Sends the ACPI Power Button press event to the virtual machine.Normally, the guest operating system running inside the virtual machine will detect this event and perform a clean shutdown procedure. This is a recommended way to turn off the virtual machine because all applications running inside it will get a chance to save their data and state.If the machine doesn't respond to this action then the guest operating system may be misconfigured or doesn't understand ACPI Power Button events at all. In this case you should select the Power off the machine action to stop virtual machine execution. S&end the shutdown signal Turns off the virtual machine.Note that this action will stop machine execution immediately so that the guest operating system running inside it will not be able to perform a clean shutdown procedure which may result in data loss inside the virtual machine. Selecting this action is recommended only if the virtual machine does not respond to the Send the shutdown signal action. &Power off the machine &قطع التيار عن الألة Restore the machine state stored in the current snapshot When checked, the machine will be returned to the state stored in the current snapshot after it is turned off. This is useful if you are sure that you want to discard the results of your last sessions and start again at that snapshot. &Restore current snapshot '%1' UIVMDesktop &Details &تفاصيل &Snapshots &لقطات UIVMListView Inaccessible متعذر بلوغه(ها) %1 %2 since %3 Session %4 VM tooltip (name, last state change, session state) %1 %2 مند %3 الجلسة %4 %1 Inaccessible since %2 Inaccessible VM tooltip (name, last state change) %1 متعذر بلوغه مند %2 S&how أ&ظهر S&tart إ&بدأ UIVMLogViewer &Save Alt+S Alt+S &Refresh &أنعش Alt+R Alt+R Alt+C Alt+C %1 - VirtualBox Log Viewer No log files found. Press the Refresh button to rescan the log folder %1. Save VirtualBox Log As Help مساعدة F1 F1 &Find Alt+F Alt+F Close Close the search panel Enter a search string here &Previous Search for the previous occurrence of the string &Next Search for the next occurrence of the string C&ase Sensitive Perform case sensitive search (when checked) String not found UIVMPreviewWindow Update Disabled Every 0.5 s Every 1 s Every 2 s Every 5 s Every 10 s No Preview VBoxAboutDlg VirtualBox - About بخصوص فيرتول بوكس &OK &موافق Alt+O Alt+O VirtualBox Graphical User Interface Version %1 النسخة 1% لواجهة الرسوم الخاصة بالمستخدم لفيرتول بوكس VirtualBox Graphical User Interface Version %1 VBoxAboutNonOSEDlg VirtualBox - About بخصوص فيرتول بوكس VBoxAddNIDialog Add Host Interface أضف واجهة للمضيف Interface Name إسم الواجهة Descriptive name of the new network interface إسم واصف لواجهة الشبكة الجديدة &OK &موافق Cancel إلغاء VBoxAddSFDialog Add Share أضف مشاركة Edit Share عدل مشاركة Enter existing path for the shared folder here أذخل هنا الممر المتعلق بالمجلد المُشتَرك Enter name for the shared folder to be created أذخل إسم مجلد المشاركة الذي تودون إنشاءه Click to invoke <open folder> dialog أنقر لإسدعاء علبة الحوار <open folder> Select a folder to share حدد مجلد للمشاركة OK موافق Cancel إلغاء &OK &موافق VBoxCloseVMDlg Close Virtual Machine أغلق اﻷلة الواقعية You want to: أنت تريد أن : &Save the machine state &حفظ حالة اﻷلة الواقعية Alt+S Alt+S &Power off the machine &قطع التيار عن الألة Alt+P Alt+P &Revert to the current snapshot &عد إلى القطة الحالية Alt+R Alt+R Revert the machine state to the state stored in the current snapshot أعد حالة اﻷلة الواقعية إلى الحالة المحفوظة في اللقطة الحالية Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء VBoxConsoleWnd VirtualBox OSE فيرتول بوكس أوئِسئِي innotek VirtualBox إنُطِك فيرتول بوكس &Help &مساعدة Snapshot %1 لقطة %1 &Contents... &محتويات... F1 F1 VBoxDiskImageManagerDlg Name إسم Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء -- no info -- &New... &جديد... &Add... &أظف... Re&fresh أن&عش New جديد Add أظف Remove أزل Refresh أنعش Ctrl+N Ctrl+N Ctrl+A Ctrl+A Ctrl+D Ctrl+D Ctrl+L Ctrl+L Ctrl+R Ctrl+R Snapshot لقطة &Select &حدِد VBoxEmptyFileSelector &Choose... VBoxFilePathSelectorWidget <reset to default> The actual default path value will be displayed after accepting the changes and opening this dialog again. <not selected> Please use the Other... item from the drop-down list to select a path. Other... Reset Opens a dialog to select a different folder. Resets the folder path to the default value. Opens a dialog to select a different file. Resets the file path to the default value. &Copy Please type the folder path here. Please type the file path here. VBoxGLSettingsDlg Language لغة VBoxGlobal Unknown device %1:%2 USB device details Vendor ID: %1 Product ID: %2 Revision: %3 USB device tooltip Serial No. %1 USB device tooltip State: %1 USB device tooltip Name details report إسم OS Type details report Base Memory details report General details report Video Memory details report Boot Order details report ACPI details report IO APIC details report Nested Paging details report Enabled details report (ACPI) مكِن Disabled details report (ACPI) عطِل Enabled details report (IO APIC) مكِن Disabled details report (IO APIC) عطِل Enabled details report (Nested Paging) مكِن Disabled details report (Nested Paging) عطِل Disabled details report (audio) عطِل Audio details report Bridged adapter, %1 details report (network) Host-only adapter, '%1' details report (network) Adapter %1 details report (network) Disabled details report (network) عطِل Network details report Device Filters details report (USB) %1 (%2 active) details report (USB) Disabled details report (USB) عطِل %1 details report (VRDP) %1 Disabled details report (VRDP) عطِل Powered Off MachineState Saved MachineState Aborted MachineState Running MachineState Paused MachineState Starting MachineState Stopping MachineState Saving MachineState Restoring MachineState Spawning SessionState None DeviceType Floppy DeviceType CD/DVD-ROM DeviceType Hard Disk DeviceType Network DeviceType SCSI StorageBus Normal DiskType Immutable DiskType Writethrough DiskType Raw File PortMode Ignore USBFilterActionType تجاهل Hold USBFilterActionType Null Audio Driver AudioDriverType Windows Multimedia AudioDriverType OSS Audio Driver AudioDriverType ALSA Audio Driver AudioDriverType Windows DirectSound AudioDriverType CoreAudio AudioDriverType Intel PRO/1000 MT Server (82545EM) NetworkAdapterType Not attached NetworkAttachmentType NAT NetworkAttachmentType Bridged Adapter NetworkAttachmentType Internal Network NetworkAttachmentType Host-only Adapter NetworkAttachmentType Not supported USBDeviceState Unavailable USBDeviceState Busy USBDeviceState Available USBDeviceState Held USBDeviceState Captured USBDeviceState Disabled ClipboardType عطِل Host To Guest ClipboardType Guest To Host ClipboardType Bidirectional ClipboardType Port %1 details report (serial ports) Disabled details report (serial ports) عطِل Serial Ports details report USB details report Shared Folders details report (shared folders) %1 details report (shadef folders) %1 None details report (shared folders) Shared Folders details report Disconnected PortMode Host Pipe PortMode Host Device PortMode PIIX3 StorageControllerType PIIX4 StorageControllerType ICH6 StorageControllerType AHCI StorageControllerType Lsilogic StorageControllerType BusLogic StorageControllerType User-defined serial port VT-x/AMD-V details report PAE/NX details report Enabled details report (VT-x/AMD-V) مكِن Disabled details report (VT-x/AMD-V) عطِل Enabled details report (PAE/NX) مكِن Disabled details report (PAE/NX) عطِل %1 MB details report Processor(s) details report %1 details report System details report Disabled details report (VRDP Server) عطِل Display details report Host Driver details report (audio) Controller details report (audio) Internal network, '%1' details report (network) Port %1 details report (parallel ports) Disabled details report (parallel ports) عطِل Parallel Ports details report USB DeviceType Shared Folder DeviceType IDE StorageBus SATA StorageBus Primary StorageBusChannel Secondary StorageBusChannel Master StorageBusDevice Slave StorageBusDevice Port %1 StorageBusChannel Solaris Audio AudioDriverType PulseAudio AudioDriverType ICH AC97 AudioControllerType SoundBlaster 16 AudioControllerType PCnet-PCI II (Am79C970A) NetworkAdapterType PCnet-FAST III (Am79C973) NetworkAdapterType Intel PRO/1000 MT Desktop (82540EM) NetworkAdapterType Intel PRO/1000 T Server (82543GC) NetworkAdapterType Vendor ID: %1 USB filter tooltip Product ID: %2 USB filter tooltip Revision: %3 USB filter tooltip Product: %4 USB filter tooltip Manufacturer: %5 USB filter tooltip Serial No.: %1 USB filter tooltip Port: %1 USB filter tooltip State: %1 USB filter tooltip Checking... medium Inaccessible medium متعذر بلوغه(ها) 3D Acceleration details report Enabled details report (3D Acceleration) مكِن Disabled details report (3D Acceleration) عطِل Setting Up MachineState Differencing DiskType Enabled details report (2D Video Acceleration) مكِن Disabled details report (2D Video Acceleration) عطِل 2D Video Acceleration details report Not Attached details report (Storage) Storage details report Teleported MachineState Guru Meditation MachineState Teleporting MachineState Taking Live Snapshot MachineState Teleporting Paused VM MachineState Restoring Snapshot MachineState Deleting Snapshot MachineState Floppy StorageBus Device %1 StorageBusDevice IDE Primary Master New Storage UI : Slot Name IDE Primary Slave New Storage UI : Slot Name IDE Secondary Master New Storage UI : Slot Name IDE Secondary Slave New Storage UI : Slot Name SATA Port %1 New Storage UI : Slot Name SCSI Port %1 New Storage UI : Slot Name Floppy Device %1 New Storage UI : Slot Name Paravirtualized Network (virtio-net) NetworkAdapterType I82078 StorageControllerType Empty medium Host Drive '%1' medium Host Drive %1 (%2) medium Type (Format): %1 (%2) medium Attached to: %1 image Not Attached image Checking accessibility... medium Failed to check media accessibility. medium No medium selected medium You can also change this while the machine is running. No media available medium You can create media images using the virtual media manager. Attaching this hard disk will be performed indirectly using a newly created differencing hard disk. medium Some of the media in this hard disk chain are inaccessible. Please use the Virtual Media Manager in Show Differencing Hard Disks mode to inspect these media. medium This base hard disk is indirectly attached using the following differencing hard disk: medium %n year(s) %n month(s) %n day(s) %n hour(s) %n minute(s) %n second(s) (CD/DVD) Screens details report SAS StorageBus LsiLogic SAS StorageControllerType B size suffix Bytes KB size suffix KBytes=1024 Bytes MB size suffix MBytes=1024 KBytes GB size suffix GBytes=1024 MBytes TB size suffix TBytes=1024 GBytes PB size suffix PBytes=1024 TBytes Enabled nested paging مكِن Disabled nested paging عطِل Nested Paging Shareable DiskType Unknown device USB device details SAS Port %1 New Storage UI : Slot Name Remote Desktop Server Port details report (VRDE Server) Remote Desktop Server details report (VRDE Server) Disabled details report (VRDE Server) عطِل Choose a virtual hard disk file hard disk Choose a virtual CD/DVD disk file CD/DVD-ROM disk Choose a virtual floppy disk file floppy disk All %1 images (%2) All files (*) Fault Tolerant Syncing MachineState Unlocked SessionState Locked SessionState Unlocking SessionState Null AuthType External AuthType Guest AuthType Intel HD Audio AudioControllerType UDP NATProtocolType TCP NATProtocolType PIIX3 ChipsetType ICH9 ChipsetType and MB size suffix MBytes=1024KBytes Readonly DiskType Multi-attach DiskType Dynamically allocated storage Fixed size storage Dynamically allocated storage split into files of less than 2GB Fixed size storage split into files of less than 2GB Execution Cap details report %1% details report Generic, '%1' details report (network) Generic Driver NetworkAttachmentType Deny NetworkAdapterPromiscModePolicyType Allow VMs NetworkAdapterPromiscModePolicyType Allow All NetworkAdapterPromiscModePolicyType Adapter %1 VBoxGlobalSettings Cannot delete the key '%1'. The value '%1' of the key '%2' doesn't match the regexp constraint '%3'. '%1' is an invalid host-combination code-sequence. VBoxGlobalSettingsDlg 0 0 1 1 2 2 Select حدِد Alt+A Alt+A Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Language لغة Language لغة 3 3 Language: لغة: VBoxHardDiskSettings Delete حذف VBoxHelpButton &Help &مساعدة VBoxLicenseViewer VirtualBox License I &Agree I &Disagree VBoxLogSearchPanel Alt+P Alt+P VBoxMediaManagerDlg &Actions &New... &جديد... &Add... &أظف... R&emove Re&lease Re&fresh أن&عش Create a new virtual hard disk Add an existing medium Remove the selected medium Release the selected medium by detaching it from the machines Refresh the media list Checking accessibility &Select &حدِد All files (*) Select a hard disk image file Select a CD/DVD-ROM disk image file Select a floppy disk image file Not Attached -- no info -- Virtual Media Manager Hard &Disks Name إسم Virtual Size Actual Size &CD/DVD Images Size &Floppy Images CD/DVD-ROM disk hard disk floppy disk All %1 images (%2) Type: Location: Format: Storage details: Attached to: &Copy... &Modify... Copy an existing medium Modify the attributes of the selected medium C&lose VBoxMiniToolBar Always show the toolbar Exit Full Screen or Seamless Mode Close VM Minimize Window VBoxOSTypeSelectorWidget Operating &System: Displays the operating system family that you plan to install into this virtual machine. &Version: Displays the operating system type that you plan to install into this virtual machine (called a guest operating system). VBoxRegistrationDlg &Name &إسم Cancel إلغاء VBoxSFDialog OK موافق Cancel إلغاء Help مساعدة &OK &موافق VBoxScreenshotViewer Screenshot of %1 (%2) Click to view non-scaled screenshot. Click to view scaled screenshot. VBoxSelectorWnd VirtualBox OSE فيرتول بوكس أوئِسئِي &Details &تفاصيل Ctrl+D Ctrl+D Ctrl+G Ctrl+G Ctrl+Q Ctrl+Q New جديد Ctrl+N Ctrl+N Ctrl+S Ctrl+S &Delete &حذف Delete حذف D&iscard إ&لغاء &Refresh &أنعش Refresh أنعش Ctrl+R Ctrl+R &Contents... &محتويات... F1 F1 &File &ملف &VM ا&لألة الواقعية &Help &مساعدة &Snapshots &لقطات D&escription و&صف D&escription * و&صف * Show أظهر Start إبدأ Ctrl+L Ctrl+L VBoxSharedFoldersSettings Name إسم Path مسار VBoxUSBFilterSettings don't translate VBoxUSBFilterSettings Shared &Folders المجلدات ال&مشتركة Add أظف Remove أزل VBoxSnapshotDetailsDlg VBoxSnapshotDetailsDlg VBoxSnapshotDetailsDlg Snapshot Details تفاصيل اللقطة &Name &إسم &Description &وصف &Machine Details &تفاصيل اﻷلة Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Details of %1 (%2) تفاصيل %1 (%2) Click to enlarge the screenshot. &Name: Taken: &Description: D&etails: VBoxSnapshotsWgt [snapshot] [snapshot] VBoxSnapshotsWgt VBoxSnapshotsWgt snapshotActionGroup snapshotActionGroup Discard Snapshot إلغِ اللقطة &Discard Snapshot &إلغِ اللقطة Ctrl+Shift+D Ctrl+Shift+D curStateActionGroup curStateActionGroup Take Snapshot إلتقط لقطة Take &Snapshot إلتقط &لقطة Ctrl+Alt+S Ctrl+Alt+S Ctrl+Alt+D Ctrl+Alt+D Ctrl+Alt+Shift+D Ctrl+Alt+Shift+D Current State (changed) Current State (Modified) Current State Current State (Unmodified) The current state differs from the state stored in the current snapshot The current state is identical to the state stored in the current snapshot (current, Snapshot details online) Snapshot details offline) Snapshot details Taken at %1 Snapshot (time) أخدت في %1 Taken on %1 Snapshot (date + time) أخدت في %1 %1 since %2 Current State (time or date + time) %1 مند %2 Snapshot %1 لقطة %1 S&how Details Take a snapshot of the current virtual machine state Show the details of the selected snapshot (%1) &Restore Snapshot &Delete Snapshot Restore the selected snapshot of the virtual machine Delete the selected snapshot of the virtual machine (%1 ago) &Clone... Clone the selected virtual machine VBoxSwitchMenu Disable عطِل Enable مكِن %1 %2 %1 %2 VBoxTakeSnapshotDlg Take Snapshot of Virtual Machine إلتقط لقطة للألة الواقعية Snapshot &Name &إسم اللقطة Snapshot &Description &صفات اللقطة Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Warning: You are taking a snapshot of a running machine which has %n immutable image(s) attached to it. As long as you are working from this snapshot the immutable image(s) will not be reset to avoid loss of data. VBoxUSBFilterSettings VBoxUSBFilterSettings don't translate VBoxUSBFilterSettings &Name &إسم Any remote أي Yes remote نعم No remote لا VBoxUSBMenu <no devices available> USB devices No supported devices connected to the host PC USB device tooltip VBoxVMDescriptionPage Ctrl+E Ctrl+E VBoxVMDetailsView The selected virtual machine is inaccessible. Please inspect the error message shown below and press the Refresh button if you want to repeat the accessibility check: اﻷلة الواقعية المختارة inaccessible. المرجوا التأكد من رسالة الخطأ البارزة أسفله ثم إظغط على زر Refresh إذا أردت إعادت الإختبار: VBoxVMInformationDlg %1 - Session Information &Details &تفاصيل &Runtime DMA Transfers PIO Transfers Data Read Data Written Data Transmitted Data Received Enabled مكِن Disabled عطِل Runtime Attributes Screen Resolution Not Detected guest additions Not Detected guest os type Guest Additions Guest OS Type No Network Adapters Enabled nested paging مكِن Disabled nested paging عطِل VBoxVMInformationDlg Storage Statistics No Storage Devices Network Statistics Not Available details report (VRDE server port) VBoxVMListBox %1 %2 since %3 Session %4 VM tooltip (name, last state change, session state) %1 %2 مند %3 الجلسة %4 %1 Inaccessible since %2 Inaccessible VM tooltip (name, last state change) %1 متعذر بلوغه مند %2 Inaccessible متعذر بلوغه(ها) VBoxVMNetworkSettings Alt+G Alt+G Alt+B Alt+B Select حدِد Add أظف Remove أزل VBoxVMSerialPortSettings Alt+C Alt+C VBoxVMSettingsDlg 0 0 1 1 2 3 3 3 4 4 5 5 6 6 7 7 8 8 &Name &إسم Select حدِد Alt+C Alt+C Alt+P Alt+P &Description &وصف Alt+D Alt+D Alt+I Alt+I Alt+U Alt+U Ctrl+Up Ctrl+Up Move Up (Ctrl+Up) Move Up (Ctrl+Up) Ctrl+Down Ctrl+Down Help مساعدة F1 F1 &OK &موافق Alt+O Alt+O Cancel إلغاء Add أظف Remove أزل 9 9 Alt+R Alt+R 00 00 01 01 02 02 03 03 04 04 05 05 08 08 10 10 09 09 06 06 07 07