DevBusMouse.cpp@ 94967

Last change on this file since 94967 was 93115, checked in by vboxsync, 3 years ago
scm --update-copyright-year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 30.9 KB

Line
1	/* $Id: DevBusMouse.cpp 93115 2022-01-01 11:31:46Z vboxsync $ */
2	/** @file
3	* BusMouse - Microsoft Bus (parallel) mouse controller device.
4	*/
5
6	/*
7	* Copyright (C) 2006-2022 Oracle Corporation
8	*
9	* Permission is hereby granted, free of charge, to any person
10	* obtaining a copy of this software and associated documentation
11	* files (the "Software"), to deal in the Software without
12	* restriction, including without limitation the rights to use,
13	* copy, modify, merge, publish, distribute, sublicense, and/or sell
14	* copies of the Software, and to permit persons to whom the
15	* Software is furnished to do so, subject to the following
16	* conditions:
17	*
18	* The above copyright notice and this permission notice shall be
19	* included in all copies or substantial portions of the Software.
20	*
21	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
22	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
23	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
24	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
25	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
26	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
27	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
28	* OTHER DEALINGS IN THE SOFTWARE.
29	*/
30
31
32	/*********************************************************************************************************************************
33	* Header Files *
34	*********************************************************************************************************************************/
35	#define LOG_GROUP LOG_GROUP_DEV_KBD
36	#include <VBox/vmm/pdmdev.h>
37	#ifndef IN_RING3
38	# include <VBox/vmm/pdmapi.h>
39	#endif
40	#include <VBox/AssertGuest.h>
41	#include <VBox/version.h>
42	#include <iprt/assert.h>
43	#include <iprt/uuid.h>
44
45	/** @page pg_busmouse DevBusMouse - Microsoft Bus Mouse Emulation
46	*
47	* The Microsoft Bus Mouse was an early mouse sold by Microsoft, originally
48	* introduced in 1983. The mouse had a D-shaped 9-pin connector which plugged
49	* into a small ISA add-in board.
50	*
51	* The mouse itself was very simple (compared to a serial mouse) and most of the
52	* logic was located on the ISA board. Later, Microsoft sold an InPort mouse,
53	* which was also called a "bus mouse", but used a different interface.
54	*
55	* Microsoft part numbers for the Bus Mouse were 037-099 (100 ppi)
56	* and 037-199 (200 ppi).
57	*
58	* The Bus Mouse adapter included IRQ configuration jumpers (ref. MS article
59	* Q12230). The IRQ could be set to one of 2, 3, 4, 5. The typical setting
60	* would be IRQ 2 for a PC/XT and IRQ 5 for an AT compatible. Because IRQ 5
61	* may conflict with a SoundBlaster or a PCI device, this device defaults to
62	* IRQ 3. Note that IRQ 3 is also used by the COM 2 device, not often needed.
63	*
64	* The ISA adapter was built around an Intel 8255A compatible chip (ref.
65	* MS article Q46369). Once enabled, the adapter raises the configured IRQ
66	* 30 times per second; the rate is not configurable. The interrupts
67	* occur regardless of whether the mouse state has changed or not.
68	*
69	* To function properly, the 8255A must be programmed as follows:
70	* - Port A: Input. Used to read motion deltas and button states.
71	* - Port B: Output. Not used except for mouse detection.
72	* - Port C: Split. Upper bits set as output, used for control purposes.
73	* Lower bits set as input, reflecting IRQ state.
74	*
75	* Detailed information was gleaned from Windows and OS/2 DDK mouse samples.
76	*/
77
78
79	/*********************************************************************************************************************************
80	* Defined Constants And Macros *
81	*********************************************************************************************************************************/
82	/** The original bus mouse controller is fixed at I/O port 0x23C. */
83	#define BMS_IO_BASE 0x23C
84	#define BMS_IO_SIZE 4
85
86	/** @name Offsets relative to the I/O base.
87	@{ /
88	#define BMS_PORT_DATA 0 /*< 8255 Port A. /
89	#define BMS_PORT_SIG 1 /*< 8255 Port B. /
90	#define BMS_PORT_CTRL 2 /*< 8255 Port C. /
91	#define BMS_PORT_INIT 3 /*< 8255 Control Port. /
92	/** @} */
93
94	/** @name Port C bits (control port).
95	* @{ */
96	#define BMS_CTL_INT_DIS RT_BIT(4) /*< Disable IRQ (else enabled). /
97	#define BMS_CTL_SEL_HIGH RT_BIT(5) /*< Select hi nibble (else lo). /
98	#define BMS_CTL_SEL_Y RT_BIT(6) /*< Select X to read (else Y). /
99	#define BMS_CTL_HOLD RT_BIT(7) /*< Hold counter (else clear). /
100	/** @} */
101
102	/** @name Port A bits (data port).
103	* @{ */
104	#define BMS_DATA_DELTA 0x0F /*< Motion delta in lower nibble. /
105	#define BMS_DATA_B3_UP RT_BIT(5) /*< Button 3 (right) is up. /
106	#define BMS_DATA_B2_UP RT_BIT(6) /*< Button 2 (middle) is up. /
107	#define BMS_DATA_B1_UP RT_BIT(7) /*< Button 1 (left) is up. /
108	/** @} */
109
110	/** Convert IRQ level (2/3/4/5) to a bit in the control register. */
111	#define BMS_IRQ_BIT(a) (1 << (5 - a))
112
113	/** IRQ period, corresponds to approx. 30 Hz. */
114	#define BMS_IRQ_PERIOD_MS 34
115
116	/** Default IRQ setting. */
117	#define BMS_DEFAULT_IRQ 3
118
119	/** The saved state version. */
120	#define BMS_SAVED_STATE_VERSION 1
121
122
123	/*********************************************************************************************************************************
124	* Structures and Typedefs *
125	*********************************************************************************************************************************/
126	/**
127	* The shared Bus Mouse device state.
128	*/
129	typedef struct MouState
130	{
131	/** @name 8255A state
132	* @{ */
133	uint8_t port_a;
134	uint8_t port_b;
135	uint8_t port_c;
136	uint8_t ctrl_port;
137	uint8_t cnt_held; /*< Counters held for reading. /
138	uint8_t held_dx;
139	uint8_t held_dy;
140	uint8_t irq; /*< The "jumpered" IRQ level. /
141	int32_t irq_toggle_counter;
142	/** Timer period in milliseconds. */
143	uint32_t cTimerPeriodMs;
144	/** Mouse timer handle. */
145	TMTIMERHANDLE hMouseTimer;
146	/** @} */
147
148	/** @name mouse state
149	* @{ */
150	int32_t disable_counter;
151	int32_t mouse_dx; /* current values, needed for 'poll' mode */
152	int32_t mouse_dy;
153	uint8_t mouse_enabled;
154	uint8_t mouse_buttons;
155	uint8_t mouse_buttons_reported;
156	uint8_t bAlignment;
157	/** @} */
158
159	/** The I/O ports registration. */
160	IOMIOPORTHANDLE hIoPorts;
161
162	} MouState, BMSSTATE;
163	/** Pointer to the shared Bus Mouse device state. */
164	typedef BMSSTATE *PBMSSTATE;
165
166
167	/**
168	* The ring-3 Bus Mouse device state.
169	*/
170	typedef struct BMSSTATER3
171	{
172	/** Pointer to the device instance.
173	* @note Only for getting our bearings in an interface method. */
174	PPDMDEVINSR3 pDevIns;
175
176	/**
177	* Mouse port - LUN#0.
178	*
179	* @implements PDMIBASE
180	* @implements PDMIMOUSEPORT
181	*/
182	struct
183	{
184	/** The base interface for the mouse port. */
185	PDMIBASE IBase;
186	/** The mouse port base interface. */
187	PDMIMOUSEPORT IPort;
188
189	/** The base interface of the attached mouse driver. */
190	R3PTRTYPE(PPDMIBASE) pDrvBase;
191	/** The mouse interface of the attached mouse driver. */
192	R3PTRTYPE(PPDMIMOUSECONNECTOR) pDrv;
193	} Mouse;
194	} BMSSTATER3;
195	/** Pointer to the ring-3 Bus Mouse device state. */
196	typedef BMSSTATER3 *PBMSSTATER3;
197
198
199	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
200
201	# ifdef IN_RING3
202
203	/**
204	* Report a change in status down the driver chain.
205	*
206	* We want to report the mouse as enabled if and only if the guest is "using"
207	* it. That way, other devices (e.g. a PS/2 or USB mouse) can receive mouse
208	* events when the bus mouse is disabled. Enabling interrupts constitutes
209	* enabling the bus mouse. The mouse is considered disabled if interrupts are
210	* disabled for several consecutive mouse timer ticks; this is because the
211	* interrupt handler in the guest typically temporarily disables interrupts and
212	* we do not want to toggle the enabled/disabled state more often than
213	* necessary.
214	*/
215	static void bmsR3UpdateDownstreamStatus(PBMSSTATE pThis, PBMSSTATER3 pThisCC)
216	{
217	PPDMIMOUSECONNECTOR pDrv = pThisCC->Mouse.pDrv;
218	bool fEnabled = !!pThis->mouse_enabled;
219	pDrv->pfnReportModes(pDrv, fEnabled, false, false);
220	}
221
222	/**
223	* Process a mouse event coming from the host.
224	*/
225	static void bmsR3MouseEvent(PBMSSTATE pThis, int dx, int dy, int dz, int dw, int buttons_state)
226	{
227	LogRel3(("%s: dx=%d, dy=%d, dz=%d, dw=%d, buttons_state=0x%x\n",
228	__PRETTY_FUNCTION__, dx, dy, dz, dw, buttons_state));
229
230	/* Only record X/Y movement and buttons. */
231	pThis->mouse_dx += dx;
232	pThis->mouse_dy += dy;
233	pThis->mouse_buttons = buttons_state;
234	}
235
236	/**
237	* @callback_method_impl{FNTMTIMERDEV}
238	*/
239	static DECLCALLBACK(void) bmsR3TimerCallback(PPDMDEVINS pDevIns, TMTIMERHANDLE hTimer, void *pvUser)
240	{
241	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
242	PBMSSTATER3 pThisCC = PDMDEVINS_2_DATA(pDevIns, PBMSSTATER3);
243	uint8_t irq_bit;
244	RT_NOREF(pvUser, hTimer);
245	Assert(hTimer == pThis->hMouseTimer);
246
247	/* Toggle the IRQ line if interrupts are enabled. */
248	irq_bit = BMS_IRQ_BIT(pThis->irq);
249
250	if (pThis->port_c & irq_bit)
251	{
252	if (!(pThis->port_c & BMS_CTL_INT_DIS))
253	PDMDevHlpISASetIrq(pDevIns, pThis->irq, PDM_IRQ_LEVEL_LOW);
254	pThis->port_c &= ~irq_bit;
255	}
256	else
257	{
258	pThis->port_c \|= irq_bit;
259	if (!(pThis->port_c & BMS_CTL_INT_DIS))
260	PDMDevHlpISASetIrq(pDevIns, pThis->irq, PDM_IRQ_LEVEL_HIGH);
261	}
262
263	/* Handle enabling/disabling of the mouse interface. */
264	if (pThis->port_c & BMS_CTL_INT_DIS)
265	{
266	if (pThis->disable_counter)
267	--pThis->disable_counter;
268
269	if (pThis->disable_counter == 0 && pThis->mouse_enabled)
270	{
271	pThis->mouse_enabled = false;
272	bmsR3UpdateDownstreamStatus(pThis, pThisCC);
273	}
274	}
275	else
276	{
277	pThis->disable_counter = 8; /* Re-arm the disable countdown. */
278	if (!pThis->mouse_enabled)
279	{
280	pThis->mouse_enabled = true;
281	bmsR3UpdateDownstreamStatus(pThis, pThisCC);
282	}
283	}
284
285	/* Re-arm the timer. */
286	PDMDevHlpTimerSetMillies(pDevIns, hTimer, pThis->cTimerPeriodMs);
287	}
288
289	# endif /* IN_RING3 */
290
291	static void bmsSetReportedButtons(PBMSSTATE pThis, unsigned fButtons, unsigned fButtonMask)
292	{
293	pThis->mouse_buttons_reported \|= (fButtons & fButtonMask);
294	pThis->mouse_buttons_reported &= (fButtons \| ~fButtonMask);
295	}
296
297	/**
298	* Update the internal state after a write to port C.
299	*/
300	static void bmsUpdateCtrl(PPDMDEVINS pDevIns, PBMSSTATE pThis)
301	{
302	int32_t dx, dy;
303
304	/* If the controller is in hold state, transfer data from counters. */
305	if (pThis->port_c & BMS_CTL_HOLD)
306	{
307	if (!pThis->cnt_held)
308	{
309	pThis->cnt_held = true;
310	dx = pThis->mouse_dx < 0 ? RT_MAX(pThis->mouse_dx, -128)
311	: RT_MIN(pThis->mouse_dx, 127);
312	dy = pThis->mouse_dy < 0 ? RT_MAX(pThis->mouse_dy, -128)
313	: RT_MIN(pThis->mouse_dy, 127);
314	pThis->mouse_dx -= dx;
315	pThis->mouse_dy -= dy;
316	bmsSetReportedButtons(pThis, pThis->mouse_buttons & 0x07, 0x07);
317
318	/* Force type conversion. */
319	pThis->held_dx = dx;
320	pThis->held_dy = dy;
321	}
322	}
323	else
324	pThis->cnt_held = false;
325
326	/* Move the appropriate nibble into port A. */
327	if (pThis->cnt_held)
328	{
329	if (pThis->port_c & BMS_CTL_SEL_Y)
330	{
331	if (pThis->port_c & BMS_CTL_SEL_HIGH)
332	pThis->port_a = pThis->held_dy >> 4;
333	else
334	pThis->port_a = pThis->held_dy & 0xF;
335	}
336	else
337	{
338	if (pThis->port_c & BMS_CTL_SEL_HIGH)
339	pThis->port_a = pThis->held_dx >> 4;
340	else
341	pThis->port_a = pThis->held_dx & 0xF;
342	}
343	/* And update the button bits. */
344	pThis->port_a \|= pThis->mouse_buttons & 1 ? 0 : BMS_DATA_B1_UP;
345	pThis->port_a \|= pThis->mouse_buttons & 2 ? 0 : BMS_DATA_B3_UP;
346	pThis->port_a \|= pThis->mouse_buttons & 4 ? 0 : BMS_DATA_B2_UP;
347	}
348	/* Immediately clear the IRQ if necessary. */
349	if (pThis->port_c & BMS_CTL_INT_DIS)
350	{
351	PDMDevHlpISASetIrq(pDevIns, pThis->irq, PDM_IRQ_LEVEL_LOW);
352	pThis->port_c &= ~BMS_IRQ_BIT(pThis->irq);
353	}
354	}
355
356	/**
357	* @callback_method_impl{FNIOMIOPORTNEWIN}
358	*/
359	static DECLCALLBACK(VBOXSTRICTRC) bmsIoPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT offPort, uint32_t pu32, unsigned cb)
360	{
361	RT_NOREF(pvUser);
362	if (cb == 1)
363	{
364	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
365	uint32_t uValue;
366
367	switch (offPort)
368	{
369	case BMS_PORT_DATA:
370	/* Read port A. */
371	uValue = pThis->port_a;
372	break;
373	case BMS_PORT_SIG:
374	/* Read port B. */
375	uValue = pThis->port_b;
376	break;
377	case BMS_PORT_CTRL:
378	/* Read port C. */
379	uValue = pThis->port_c;
380	/* Some Microsoft driver code reads the control port 10,000 times when
381	* determining the IRQ level. This can occur faster than the IRQ line
382	* transitions and the detection fails. To work around this, we force
383	* the IRQ bit to toggle every once in a while.
384	*/
385	if (pThis->irq_toggle_counter)
386	pThis->irq_toggle_counter--;
387	else
388	{
389	pThis->irq_toggle_counter = 1000;
390	uValue ^= BMS_IRQ_BIT(pThis->irq);
391	}
392	break;
393	case BMS_PORT_INIT:
394	/* Read the 8255A control port. */
395	uValue = pThis->ctrl_port;
396	break;
397	default:
398	ASSERT_GUEST_MSG_FAILED(("invalid port %#x\n", offPort));
399	uValue = 0xff;
400	break;
401	}
402
403	*pu32 = uValue;
404	Log2(("mouIoPortRead: offPort=%#x+%x cb=%d *pu32=%#x\n", BMS_IO_BASE, offPort, cb, uValue));
405	LogRel3(("mouIoPortRead: read port %u: %#04x\n", offPort, uValue));
406	return VINF_SUCCESS;
407	}
408	ASSERT_GUEST_MSG_FAILED(("offPort=%#x cb=%d\n", offPort, cb));
409	return VERR_IOM_IOPORT_UNUSED;
410	}
411
412	/**
413	* @callback_method_impl{FNIOMIOPORTNEWOUT}
414	*/
415	static DECLCALLBACK(VBOXSTRICTRC) bmsIoPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb)
416	{
417	RT_NOREF(pvUser);
418	if (cb == 1)
419	{
420	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
421	LogRel3(("mouIoPortWrite: write port %u: %#04x\n", offPort, u32));
422
423	switch (offPort)
424	{
425	case BMS_PORT_SIG:
426	/* Update port B. */
427	pThis->port_b = u32;
428	break;
429	case BMS_PORT_DATA:
430	/* Do nothing, port A is not writable. */
431	break;
432	case BMS_PORT_INIT:
433	pThis->ctrl_port = u32;
434	break;
435	case BMS_PORT_CTRL:
436	/* Update the high nibble of port C. */
437	pThis->port_c = (u32 & 0xF0) \| (pThis->port_c & 0x0F);
438	bmsUpdateCtrl(pDevIns, pThis);
439	break;
440	default:
441	ASSERT_GUEST_MSG_FAILED(("invalid port %#x\n", offPort));
442	break;
443	}
444
445	Log2(("mouIoPortWrite: offPort=%#x+%u cb=%d u32=%#x\n", BMS_IO_BASE, offPort, cb, u32));
446	}
447	else
448	ASSERT_GUEST_MSG_FAILED(("offPort=%#x cb=%d\n", offPort, cb));
449	return VINF_SUCCESS;
450	}
451
452	# ifdef IN_RING3
453
454	/**
455	* @callback_method_impl{FNSSMDEVSAVEEXEC}
456	*/
457	static DECLCALLBACK(int) bmsR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
458	{
459	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
460	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
461
462	/* 8255A state. */
463	pHlp->pfnSSMPutU8(pSSMHandle, pThis->port_a);
464	pHlp->pfnSSMPutU8(pSSMHandle, pThis->port_b);
465	pHlp->pfnSSMPutU8(pSSMHandle, pThis->port_c);
466	pHlp->pfnSSMPutU8(pSSMHandle, pThis->ctrl_port);
467	/* Other device state. */
468	pHlp->pfnSSMPutU8(pSSMHandle, pThis->cnt_held);
469	pHlp->pfnSSMPutU8(pSSMHandle, pThis->held_dx);
470	pHlp->pfnSSMPutU8(pSSMHandle, pThis->held_dy);
471	pHlp->pfnSSMPutU8(pSSMHandle, pThis->irq);
472	pHlp->pfnSSMPutU32(pSSMHandle, pThis->cTimerPeriodMs);
473	/* Current mouse state deltas. */
474	pHlp->pfnSSMPutS32(pSSMHandle, pThis->mouse_dx);
475	pHlp->pfnSSMPutS32(pSSMHandle, pThis->mouse_dy);
476	pHlp->pfnSSMPutU8(pSSMHandle, pThis->mouse_buttons_reported);
477	/* Timer. */
478	return PDMDevHlpTimerSave(pDevIns, pThis->hMouseTimer, pSSMHandle);
479	}
480
481	/**
482	* @callback_method_impl{FNSSMDEVLOADEXEC}
483	*/
484	static DECLCALLBACK(int) bmsR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
485	{
486	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
487	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
488
489	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
490
491	if (uVersion > BMS_SAVED_STATE_VERSION)
492	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
493
494	/* 8255A state. */
495	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->port_a);
496	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->port_b);
497	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->port_c);
498	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->ctrl_port);
499	/* Other device state. */
500	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->cnt_held);
501	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->held_dx);
502	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->held_dy);
503	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->irq);
504	pHlp->pfnSSMGetU32(pSSMHandle, &pThis->cTimerPeriodMs);
505	/* Current mouse state deltas. */
506	pHlp->pfnSSMGetS32(pSSMHandle, &pThis->mouse_dx);
507	pHlp->pfnSSMGetS32(pSSMHandle, &pThis->mouse_dy);
508	pHlp->pfnSSMGetU8(pSSMHandle, &pThis->mouse_buttons_reported);
509	/* Timer. */
510	return PDMDevHlpTimerLoad(pDevIns, pThis->hMouseTimer, pSSMHandle);
511	}
512
513	/**
514	* Reset notification.
515	*
516	* @returns VBox status code.
517	* @param pDevIns The device instance data.
518	*/
519	static DECLCALLBACK(void) bmsR3Reset(PPDMDEVINS pDevIns)
520	{
521	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
522	PBMSSTATER3 pThisCC = PDMDEVINS_2_DATA(pDevIns, PBMSSTATER3);
523
524	/* Reinitialize the timer. */
525	pThis->cTimerPeriodMs = BMS_IRQ_PERIOD_MS / 2;
526	PDMDevHlpTimerSetMillies(pDevIns, pThis->hMouseTimer, pThis->cTimerPeriodMs);
527
528	/* Clear the device setup. */
529	pThis->port_a = pThis->port_b = 0;
530	pThis->port_c = BMS_CTL_INT_DIS; /* Interrupts disabled. */
531	pThis->ctrl_port = 0x91; /* Default 8255A setup. */
532
533	/* Clear motion/button state. */
534	pThis->cnt_held = false;
535	pThis->mouse_dx = pThis->mouse_dy = 0;
536	pThis->mouse_buttons = 0;
537	pThis->mouse_buttons_reported = 0;
538	pThis->disable_counter = 0;
539	pThis->irq_toggle_counter = 1000;
540
541	if (pThis->mouse_enabled)
542	{
543	pThis->mouse_enabled = false;
544	bmsR3UpdateDownstreamStatus(pThis, pThisCC);
545	}
546	}
547
548
549	/* -=-=-=-=-=- Mouse: IBase -=-=-=-=-=- */
550
551	/**
552	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
553	*/
554	static DECLCALLBACK(void ) bmsR3Base_QueryMouseInterface(PPDMIBASE pInterface, const char pszIID)
555	{
556	PBMSSTATER3 pThisCC = RT_FROM_MEMBER(pInterface, BMSSTATER3, Mouse.IBase);
557	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->Mouse.IBase);
558	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUSEPORT, &pThisCC->Mouse.IPort);
559	return NULL;
560	}
561
562
563	/* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */
564
565	/**
566	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEvent}
567	*/
568	static DECLCALLBACK(int) bmsR3MousePort_PutEvent(PPDMIMOUSEPORT pInterface, int32_t dx,
569	int32_t dy, int32_t dz, int32_t dw,
570	uint32_t fButtons)
571	{
572	PBMSSTATER3 pThisCC = RT_FROM_MEMBER(pInterface, BMSSTATER3, Mouse.IPort);
573	PPDMDEVINS pDevIns = pThisCC->pDevIns;
574	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
575	int rc = PDMDevHlpCritSectEnter(pDevIns, pDevIns->CTX_SUFF(pCritSectRo), VERR_SEM_BUSY);
576	PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, pDevIns->CTX_SUFF(pCritSectRo), rc);
577
578	bmsR3MouseEvent(pThis, dx, dy, dz, dw, fButtons);
579
580	PDMDevHlpCritSectLeave(pDevIns, pDevIns->CTX_SUFF(pCritSectRo));
581	return VINF_SUCCESS;
582	}
583
584	/**
585	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventAbs}
586	*/
587	static DECLCALLBACK(int) bmsR3MousePort_PutEventAbs(PPDMIMOUSEPORT pInterface, uint32_t x, uint32_t y,
588	int32_t dz, int32_t dw, uint32_t fButtons)
589	{
590	RT_NOREF(pInterface, x, y, dz, dw, fButtons);
591	AssertFailedReturn(VERR_NOT_SUPPORTED);
592	}
593
594	/**
595	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventMultiTouch}
596	*/
597	static DECLCALLBACK(int) bmsR3MousePort_PutEventMultiTouch(PPDMIMOUSEPORT pInterface, uint8_t cContacts,
598	const uint64_t *pau64Contacts, uint32_t u32ScanTime)
599	{
600	RT_NOREF(pInterface, cContacts, pau64Contacts, u32ScanTime);
601	AssertFailedReturn(VERR_NOT_SUPPORTED);
602	}
603
604	/* -=-=-=-=-=- setup code -=-=-=-=-=- */
605
606
607	/**
608	* @interface_method_impl{PDMDEVREGR3,pfnAttach}
609	*/
610	static DECLCALLBACK(int) bmsR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
611	{
612	PBMSSTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBMSSTATER3);
613	int rc;
614
615	AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG,
616	("Bus mouse device does not support hotplugging\n"),
617	VERR_INVALID_PARAMETER);
618
619	switch (iLUN)
620	{
621	/* LUN #0: mouse */
622	case 0:
623	rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThisCC->Mouse.IBase, &pThisCC->Mouse.pDrvBase, "Bus Mouse Port");
624	if (RT_SUCCESS(rc))
625	{
626	pThisCC->Mouse.pDrv = PDMIBASE_QUERY_INTERFACE(pThisCC->Mouse.pDrvBase, PDMIMOUSECONNECTOR);
627	if (!pThisCC->Mouse.pDrv)
628	{
629	AssertLogRelMsgFailed(("LUN #0 doesn't have a mouse interface! rc=%Rrc\n", rc));
630	rc = VERR_PDM_MISSING_INTERFACE;
631	}
632	}
633	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
634	{
635	Log(("%s/%d: warning: no driver attached to LUN #0!\n", pDevIns->pReg->szName, pDevIns->iInstance));
636	rc = VINF_SUCCESS;
637	}
638	else
639	AssertLogRelMsgFailed(("Failed to attach LUN #0! rc=%Rrc\n", rc));
640	break;
641
642	default:
643	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
644	return VERR_PDM_NO_SUCH_LUN;
645	}
646
647	return rc;
648	}
649
650
651	/**
652	* @interface_method_impl{PDMDEVREGR3,pfnDetach}
653	*/
654	static DECLCALLBACK(void) bmsR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
655	{
656	# if 0
657	/*
658	* Reset the interfaces and update the controller state.
659	*/
660	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
661	switch (iLUN)
662	{
663	/* LUN #0: mouse */
664	case 0:
665	pThis->Mouse.pDrv = NULL;
666	pThis->Mouse.pDrvBase = NULL;
667	break;
668
669	default:
670	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
671	break;
672	}
673	# else
674	RT_NOREF(pDevIns, iLUN, fFlags);
675	# endif
676	}
677
678
679	/**
680	* @interface_method_impl{PDMDEVREG,pfnConstruct}
681	*/
682	static DECLCALLBACK(int) bmsR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
683	{
684	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
685	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
686	PBMSSTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PBMSSTATER3);
687	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
688	int rc;
689	RT_NOREF(iInstance);
690
691	Assert(iInstance == 0);
692
693	/*
694	* Validate and read the configuration.
695	*/
696	PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "IRQ", "");
697
698	rc = pHlp->pfnCFGMQueryU8Def(pCfg, "IRQ", &pThis->irq, BMS_DEFAULT_IRQ);
699	if (RT_FAILURE(rc))
700	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"IRQ\" from the config"));
701	if (pThis->irq < 2 \|\| pThis->irq > 5)
702	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Invalid \"IRQ\" config setting"));
703
704	Log(("busmouse: IRQ=%u fRCEnabled=%RTbool fR0Enabled=%RTbool\n", pThis->irq, pDevIns->fRCEnabled, pDevIns->fR0Enabled));
705
706	/*
707	* Initialize the interfaces.
708	*/
709	pThisCC->pDevIns = pDevIns;
710	pThisCC->Mouse.IBase.pfnQueryInterface = bmsR3Base_QueryMouseInterface;
711	pThisCC->Mouse.IPort.pfnPutEvent = bmsR3MousePort_PutEvent;
712	pThisCC->Mouse.IPort.pfnPutEventAbs = bmsR3MousePort_PutEventAbs;
713	pThisCC->Mouse.IPort.pfnPutEventMultiTouch = bmsR3MousePort_PutEventMultiTouch;
714
715	/*
716	* Create the interrupt timer.
717	*/
718	rc = PDMDevHlpTimerCreate(pDevIns, TMCLOCK_VIRTUAL, bmsR3TimerCallback, pThis,
719	TMTIMER_FLAGS_DEFAULT_CRIT_SECT \| TMTIMER_FLAGS_NO_RING0, "Bus Mouse", &pThis->hMouseTimer);
720	AssertRCReturn(rc, rc);
721
722	/*
723	* Register I/O ports.
724	*/
725	static const IOMIOPORTDESC s_aDescs[] =
726	{
727	{ "DATA", "DATA", NULL, NULL },
728	{ "SIG", "SIG", NULL, NULL },
729	{ "CTRL", "CTRL", NULL, NULL },
730	{ "INIT", "INIT", NULL, NULL },
731	{ NULL, NULL, NULL, NULL }
732	};
733	rc = PDMDevHlpIoPortCreateAndMap(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, bmsIoPortWrite, bmsIoPortRead,
734	"Bus Mouse", s_aDescs, &pThis->hIoPorts);
735	AssertRCReturn(rc, rc);
736
737	/*
738	* Register saved state.
739	*/
740	rc = PDMDevHlpSSMRegister(pDevIns, BMS_SAVED_STATE_VERSION, sizeof(*pThis), bmsR3SaveExec, bmsR3LoadExec);
741	AssertRCReturn(rc, rc);
742
743	/*
744	* Attach to the mouse driver.
745	*/
746	rc = bmsR3Attach(pDevIns, 0, PDM_TACH_FLAGS_NOT_HOT_PLUG);
747	AssertRCReturn(rc, rc);
748
749	/*
750	* Initialize the device state.
751	*/
752	bmsR3Reset(pDevIns);
753
754	return VINF_SUCCESS;
755	}
756
757	# else /* !IN_RING3 */
758
759	/**
760	* @callback_method_impl{PDMDEVREGR0,pfnConstruct}
761	*/
762	static DECLCALLBACK(int) bmsRZConstruct(PPDMDEVINS pDevIns)
763	{
764	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
765	PBMSSTATE pThis = PDMDEVINS_2_DATA(pDevIns, PBMSSTATE);
766
767	int rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPorts, bmsIoPortWrite, bmsIoPortRead, NULL /pvUser/);
768	AssertRCReturn(rc, rc);
769
770	return VINF_SUCCESS;
771	}
772
773	# endif /* !IN_RING3 */
774
775
776	/**
777	* The device registration structure.
778	*/
779	static const PDMDEVREG g_DeviceBusMouse =
780	{
781	/* .u32Version = */ PDM_DEVREG_VERSION,
782	/* .uReserved0 = */ 0,
783	/* .szName = */ "busmouse",
784	/* .fFlags = / PDM_DEVREG_FLAGS_DEFAULT_BITS /* @todo \| PDM_DEVREG_FLAGS_RZ */ \| PDM_DEVREG_FLAGS_NEW_STYLE,
785	/* .fClass = */ PDM_DEVREG_CLASS_INPUT,
786	/* .cMaxInstances = */ 1,
787	/* .uSharedVersion = */ 42,
788	/* .cbInstanceShared = */ sizeof(BMSSTATE),
789	/* .cbInstanceCC = */ CTX_EXPR(sizeof(BMSSTATER3), 0, 0),
790	/* .cbInstanceRC = */ 0,
791	/* .cMaxPciDevices = */ 0,
792	/* .cMaxMsixVectors = */ 0,
793	/* .pszDescription = */ "Microsoft Bus Mouse controller. LUN #0 is the mouse connector.",
794	# if defined(IN_RING3)
795	/* .pszRCMod = */ "VBoxDDRC.rc",
796	/* .pszR0Mod = */ "VBoxDDR0.r0",
797	/* .pfnConstruct = */ bmsR3Construct,
798	/* .pfnDestruct = */ NULL,
799	/* .pfnRelocate = */ NULL,
800	/* .pfnMemSetup = */ NULL,
801	/* .pfnPowerOn = */ NULL,
802	/* .pfnReset = */ bmsR3Reset,
803	/* .pfnSuspend = */ NULL,
804	/* .pfnResume = */ NULL,
805	/* .pfnAttach = */ bmsR3Attach,
806	/* .pfnDetach = */ bmsR3Detach,
807	/* .pfnQueryInterface = */ NULL,
808	/* .pfnInitComplete = */ NULL,
809	/* .pfnPowerOff = */ NULL,
810	/* .pfnSoftReset = */ NULL,
811	/* .pfnReserved0 = */ NULL,
812	/* .pfnReserved1 = */ NULL,
813	/* .pfnReserved2 = */ NULL,
814	/* .pfnReserved3 = */ NULL,
815	/* .pfnReserved4 = */ NULL,
816	/* .pfnReserved5 = */ NULL,
817	/* .pfnReserved6 = */ NULL,
818	/* .pfnReserved7 = */ NULL,
819	# elif defined(IN_RING0)
820	/* .pfnEarlyConstruct = */ NULL,
821	/* .pfnConstruct = */ bmsRZConstruct,
822	/* .pfnDestruct = */ NULL,
823	/* .pfnFinalDestruct = */ NULL,
824	/* .pfnRequest = */ NULL,
825	/* .pfnReserved0 = */ NULL,
826	/* .pfnReserved1 = */ NULL,
827	/* .pfnReserved2 = */ NULL,
828	/* .pfnReserved3 = */ NULL,
829	/* .pfnReserved4 = */ NULL,
830	/* .pfnReserved5 = */ NULL,
831	/* .pfnReserved6 = */ NULL,
832	/* .pfnReserved7 = */ NULL,
833	# elif defined(IN_RC)
834	/* .pfnConstruct = */ bmsRZConstruct,
835	/* .pfnReserved0 = */ NULL,
836	/* .pfnReserved1 = */ NULL,
837	/* .pfnReserved2 = */ NULL,
838	/* .pfnReserved3 = */ NULL,
839	/* .pfnReserved4 = */ NULL,
840	/* .pfnReserved5 = */ NULL,
841	/* .pfnReserved6 = */ NULL,
842	/* .pfnReserved7 = */ NULL,
843	# else
844	# error "Not in IN_RING3, IN_RING0 or IN_RC!"
845	# endif
846	/* .u32VersionEnd = */ PDM_DEVREG_VERSION
847	};
848
849	# ifdef VBOX_IN_EXTPACK_R3
850
851	/**
852	* @callback_method_impl{FNPDMVBOXDEVICESREGISTER}
853	*/
854	extern "C" DECLEXPORT(int) VBoxDevicesRegister(PPDMDEVREGCB pCallbacks, uint32_t u32Version)
855	{
856	AssertLogRelMsgReturn(u32Version >= VBOX_VERSION,
857	("u32Version=%#x VBOX_VERSION=%#x\n", u32Version, VBOX_VERSION),
858	VERR_EXTPACK_VBOX_VERSION_MISMATCH);
859	AssertLogRelMsgReturn(pCallbacks->u32Version == PDM_DEVREG_CB_VERSION,
860	("pCallbacks->u32Version=%#x PDM_DEVREG_CB_VERSION=%#x\n", pCallbacks->u32Version, PDM_DEVREG_CB_VERSION),
861	VERR_VERSION_MISMATCH);
862
863	return pCallbacks->pfnRegister(pCallbacks, &g_DeviceBusMouse);
864	}
865
866	# else /* !VBOX_IN_EXTPACK_R3 */
867
868	/** Pointer to the ring-0 device registrations for the Bus Mouse. */
869	static PCPDMDEVREGR0 g_apDevRegs[] =
870	{
871	&g_DeviceBusMouse,
872	};
873
874	/** Module device registration record for the Bus Mouse. */
875	static PDMDEVMODREGR0 g_ModDevReg =
876	{
877	/* .u32Version = */ PDM_DEVMODREGR0_VERSION,
878	/* .cDevRegs = */ RT_ELEMENTS(g_apDevRegs),
879	/* .papDevRegs = */ &g_apDevRegs[0],
880	/* .hMod = */ NULL,
881	/* .ListEntry = */ { NULL, NULL },
882	};
883
884	DECLEXPORT(int) ModuleInit(void *hMod)
885	{
886	LogFlow(("VBoxBusMouseRZ/ModuleInit: %p\n", hMod));
887	return PDMR0DeviceRegisterModule(hMod, &g_ModDevReg);
888	}
889
890	DECLEXPORT(void) ModuleTerm(void *hMod)
891	{
892	LogFlow(("VBoxBusMouseRZ/ModuleTerm: %p\n", hMod));
893	PDMR0DeviceDeregisterModule(hMod, &g_ModDevReg);
894	}
895
896	# endif /* !VBOX_IN_EXTPACK_R3 */
897
898	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
899

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ExtPacks/BusMouseSample/DevBusMouse.cpp@ 94967

Download in other formats: