BusMouse.cpp@ 77110

Last change on this file since 77110 was 76553, checked in by vboxsync, 6 years ago
scm --update-copyright-year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 29.7 KB

Line
1	/* $Id: BusMouse.cpp 76553 2019-01-01 01:45:53Z vboxsync $ */
2	/** @file
3	* BusMouse - Microsoft Bus (parallel) mouse controller device.
4	*/
5
6	/*
7	* Copyright (C) 2006-2019 Oracle Corporation
8	*
9	* Permission is hereby granted, free of charge, to any person
10	* obtaining a copy of this software and associated documentation
11	* files (the "Software"), to deal in the Software without
12	* restriction, including without limitation the rights to use,
13	* copy, modify, merge, publish, distribute, sublicense, and/or sell
14	* copies of the Software, and to permit persons to whom the
15	* Software is furnished to do so, subject to the following
16	* conditions:
17	*
18	* The above copyright notice and this permission notice shall be
19	* included in all copies or substantial portions of the Software.
20	*
21	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
22	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
23	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
24	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
25	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
26	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
27	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
28	* OTHER DEALINGS IN THE SOFTWARE.
29	*/
30
31
32	/*********************************************************************************************************************************
33	* Header Files *
34	*********************************************************************************************************************************/
35	#define LOG_GROUP LOG_GROUP_DEV_KBD
36	#include <VBox/vmm/pdmdev.h>
37	#include <VBox/version.h>
38	#include <iprt/assert.h>
39	#include <iprt/uuid.h>
40
41	/** @page pg_busmouse DevBusMouse - Microsoft Bus Mouse Emulation
42	*
43	* The Microsoft Bus Mouse was an early mouse sold by Microsoft, originally
44	* introduced in 1983. The mouse had a D-shaped 9-pin connector which plugged
45	* into a small ISA add-in board.
46	*
47	* The mouse itself was very simple (compared to a serial mouse) and most of the
48	* logic was located on the ISA board. Later, Microsoft sold an InPort mouse,
49	* which was also called a "bus mouse", but used a different interface.
50	*
51	* Microsoft part numbers for the Bus Mouse were 037-099 (100 ppi)
52	* and 037-199 (200 ppi).
53	*
54	* The Bus Mouse adapter included IRQ configuration jumpers (ref. MS article
55	* Q12230). The IRQ could be set to one of 2, 3, 4, 5. The typical setting
56	* would be IRQ 2 for a PC/XT and IRQ 5 for an AT compatible. Because IRQ 5
57	* may conflict with a SoundBlaster or a PCI device, this device defaults to
58	* IRQ 3. Note that IRQ 3 is also used by the COM 2 device, not often needed.
59	*
60	* The ISA adapter was built around an Intel 8255A compatible chip (ref.
61	* MS article Q46369). Once enabled, the adapter raises the configured IRQ
62	* 30 times per second; the rate is not configurable. The interrupts
63	* occur regardless of whether the mouse state has changed or not.
64	*
65	* To function properly, the 8255A must be programmed as follows:
66	* - Port A: Input. Used to read motion deltas and button states.
67	* - Port B: Output. Not used except for mouse detection.
68	* - Port C: Split. Upper bits set as output, used for control purposes.
69	* Lower bits set as input, reflecting IRQ state.
70	*
71	* Detailed information was gleaned from Windows and OS/2 DDK mouse samples.
72	*/
73
74
75	/*********************************************************************************************************************************
76	* Defined Constants And Macros *
77	*********************************************************************************************************************************/
78	/** The original bus mouse controller is fixed at I/O port 0x23C. */
79	#define BMS_IO_BASE 0x23C
80	#define BMS_IO_SIZE 4
81
82	/** @name Offsets relative to the I/O base.
83	@{ /
84	#define BMS_PORT_DATA 0 /*< 8255 Port A. /
85	#define BMS_PORT_SIG 1 /*< 8255 Port B. /
86	#define BMS_PORT_CTRL 2 /*< 8255 Port C. /
87	#define BMS_PORT_INIT 3 /*< 8255 Control Port. /
88	/** @} */
89
90	/** @name Port C bits (control port).
91	* @{ */
92	#define BMS_CTL_INT_DIS RT_BIT(4) /*< Disable IRQ (else enabled). /
93	#define BMS_CTL_SEL_HIGH RT_BIT(5) /*< Select hi nibble (else lo). /
94	#define BMS_CTL_SEL_Y RT_BIT(6) /*< Select X to read (else Y). /
95	#define BMS_CTL_HOLD RT_BIT(7) /*< Hold counter (else clear). /
96	/** @} */
97
98	/** @name Port A bits (data port).
99	* @{ */
100	#define BMS_DATA_DELTA 0x0F /*< Motion delta in lower nibble. /
101	#define BMS_DATA_B3_UP RT_BIT(5) /*< Button 3 (right) is up. /
102	#define BMS_DATA_B2_UP RT_BIT(6) /*< Button 2 (middle) is up. /
103	#define BMS_DATA_B1_UP RT_BIT(7) /*< Button 1 (left) is up. /
104	/** @} */
105
106	/** Convert IRQ level (2/3/4/5) to a bit in the control register. */
107	#define BMS_IRQ_BIT(a) (1 << (5 - a))
108
109	/** IRQ period, corresponds to approx. 30 Hz. */
110	#define BMS_IRQ_PERIOD_MS 34
111
112	/** Default IRQ setting. */
113	#define BMS_DEFAULT_IRQ 3
114
115	/** The saved state version. */
116	#define BMS_SAVED_STATE_VERSION 1
117
118
119	/*********************************************************************************************************************************
120	* Structures and Typedefs *
121	*********************************************************************************************************************************/
122	/**
123	* The device state.
124	*/
125	typedef struct MouState
126	{
127	/** @name 8255A state
128	* @{ */
129	uint8_t port_a;
130	uint8_t port_b;
131	uint8_t port_c;
132	uint8_t ctrl_port;
133	uint8_t cnt_held; /*< Counters held for reading. /
134	uint8_t held_dx;
135	uint8_t held_dy;
136	uint8_t irq; /*< The "jumpered" IRQ level. /
137	int32_t irq_toggle_counter;
138	/** Mouse timer handle - HC. */
139	PTMTIMERR3 MouseTimer;
140	/** Timer period in milliseconds. */
141	uint32_t cTimerPeriodMs;
142	/** @} */
143
144	/** @name mouse state
145	* @{ */
146	int32_t disable_counter;
147	uint8_t mouse_enabled;
148	int32_t mouse_dx; /* current values, needed for 'poll' mode */
149	int32_t mouse_dy;
150	uint8_t mouse_buttons;
151	uint8_t mouse_buttons_reported;
152	/** @} */
153
154	/** Pointer to the device instance - RC. */
155	PPDMDEVINSRC pDevInsRC;
156	/** Pointer to the device instance - R3 . */
157	PPDMDEVINSR3 pDevInsR3;
158	/** Pointer to the device instance. */
159	PPDMDEVINSR0 pDevInsR0;
160
161	/**
162	* Mouse port - LUN#0.
163	*
164	* @implements PDMIBASE
165	* @implements PDMIMOUSEPORT
166	*/
167	struct
168	{
169	/** The base interface for the mouse port. */
170	PDMIBASE IBase;
171	/** The mouse port base interface. */
172	PDMIMOUSEPORT IPort;
173
174	/** The base interface of the attached mouse driver. */
175	R3PTRTYPE(PPDMIBASE) pDrvBase;
176	/** The mouse interface of the attached mouse driver. */
177	R3PTRTYPE(PPDMIMOUSECONNECTOR) pDrv;
178	} Mouse;
179	} MouState;
180
181
182
183	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
184
185	# ifdef IN_RING3
186
187	/**
188	* Report a change in status down the driver chain.
189	*
190	* We want to report the mouse as enabled if and only if the guest is "using"
191	* it. That way, other devices (e.g. a PS/2 or USB mouse) can receive mouse
192	* events when the bus mouse is disabled. Enabling interrupts constitutes
193	* enabling the bus mouse. The mouse is considered disabled if interrupts are
194	* disabled for several consecutive mouse timer ticks; this is because the
195	* interrupt handler in the guest typically temporarily disables interrupts and
196	* we do not want to toggle the enabled/disabled state more often than
197	* necessary.
198	*/
199	static void bms_update_downstream_status(MouState *pThis)
200	{
201	PPDMIMOUSECONNECTOR pDrv = pThis->Mouse.pDrv;
202	bool fEnabled = !!pThis->mouse_enabled;
203	pDrv->pfnReportModes(pDrv, fEnabled, false, false);
204	}
205
206	/**
207	* Set the emulated hardware to a known initial state.
208	*/
209	static void bms_reset(MouState *pThis)
210	{
211	/* Clear the device setup. */
212	pThis->port_a = pThis->port_b = 0;
213	pThis->port_c = BMS_CTL_INT_DIS; /* Interrupts disabled. */
214	pThis->ctrl_port = 0x91; /* Default 8255A setup. */
215
216	/* Clear motion/button state. */
217	pThis->cnt_held = false;
218	pThis->mouse_dx = pThis->mouse_dy = 0;
219	pThis->mouse_buttons = 0;
220	pThis->mouse_buttons_reported = 0;
221	pThis->disable_counter = 0;
222	pThis->irq_toggle_counter = 1000;
223
224	if (pThis->mouse_enabled)
225	{
226	pThis->mouse_enabled = false;
227	bms_update_downstream_status(pThis);
228	}
229	}
230
231	/* Process a mouse event coming from the host. */
232	static void bms_mouse_event(MouState *pThis, int dx, int dy, int dz, int dw,
233	int buttons_state)
234	{
235	LogRel3(("%s: dx=%d, dy=%d, dz=%d, dw=%d, buttons_state=0x%x\n",
236	__PRETTY_FUNCTION__, dx, dy, dz, dw, buttons_state));
237
238	/* Only record X/Y movement and buttons. */
239	pThis->mouse_dx += dx;
240	pThis->mouse_dy += dy;
241	pThis->mouse_buttons = buttons_state;
242	}
243
244	static DECLCALLBACK(void) bmsTimerCallback(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
245	{
246	RT_NOREF(pvUser);
247	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
248	uint8_t irq_bit;
249
250	/* Toggle the IRQ line if interrupts are enabled. */
251	irq_bit = BMS_IRQ_BIT(pThis->irq);
252
253	if (pThis->port_c & irq_bit)
254	{
255	if (!(pThis->port_c & BMS_CTL_INT_DIS))
256	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_LOW);
257	pThis->port_c &= ~irq_bit;
258	}
259	else
260	{
261	pThis->port_c \|= irq_bit;
262	if (!(pThis->port_c & BMS_CTL_INT_DIS))
263	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_HIGH);
264	}
265
266	/* Handle enabling/disabling of the mouse interface. */
267	if (pThis->port_c & BMS_CTL_INT_DIS)
268	{
269	if (pThis->disable_counter)
270	--pThis->disable_counter;
271
272	if (pThis->disable_counter == 0 && pThis->mouse_enabled)
273	{
274	pThis->mouse_enabled = false;
275	bms_update_downstream_status(pThis);
276	}
277	}
278	else
279	{
280	pThis->disable_counter = 8; /* Re-arm the disable countdown. */
281	if (!pThis->mouse_enabled)
282	{
283	pThis->mouse_enabled = true;
284	bms_update_downstream_status(pThis);
285	}
286	}
287
288	/* Re-arm the timer. */
289	TMTimerSetMillies(pTimer, pThis->cTimerPeriodMs);
290	}
291
292	# endif /* IN_RING3 */
293
294	static void bms_set_reported_buttons(MouState *pThis, unsigned fButtons, unsigned fButtonMask)
295	{
296	pThis->mouse_buttons_reported \|= (fButtons & fButtonMask);
297	pThis->mouse_buttons_reported &= (fButtons \| ~fButtonMask);
298	}
299
300	/* Update the internal state after a write to port C. */
301	static void bms_update_ctrl(MouState *pThis)
302	{
303	int32_t dx, dy;
304
305	/* If the controller is in hold state, transfer data from counters. */
306	if (pThis->port_c & BMS_CTL_HOLD)
307	{
308	if (!pThis->cnt_held)
309	{
310	pThis->cnt_held = true;
311	dx = pThis->mouse_dx < 0 ? RT_MAX(pThis->mouse_dx, -128)
312	: RT_MIN(pThis->mouse_dx, 127);
313	dy = pThis->mouse_dy < 0 ? RT_MAX(pThis->mouse_dy, -128)
314	: RT_MIN(pThis->mouse_dy, 127);
315	pThis->mouse_dx -= dx;
316	pThis->mouse_dy -= dy;
317	bms_set_reported_buttons(pThis, pThis->mouse_buttons & 0x07, 0x07);
318
319	/* Force type conversion. */
320	pThis->held_dx = dx;
321	pThis->held_dy = dy;
322	}
323	}
324	else
325	pThis->cnt_held = false;
326
327	/* Move the appropriate nibble into port A. */
328	if (pThis->cnt_held)
329	{
330	if (pThis->port_c & BMS_CTL_SEL_Y)
331	{
332	if (pThis->port_c & BMS_CTL_SEL_HIGH)
333	pThis->port_a = pThis->held_dy >> 4;
334	else
335	pThis->port_a = pThis->held_dy & 0xF;
336	}
337	else
338	{
339	if (pThis->port_c & BMS_CTL_SEL_HIGH)
340	pThis->port_a = pThis->held_dx >> 4;
341	else
342	pThis->port_a = pThis->held_dx & 0xF;
343	}
344	/* And update the button bits. */
345	pThis->port_a \|= pThis->mouse_buttons & 1 ? 0 : BMS_DATA_B1_UP;
346	pThis->port_a \|= pThis->mouse_buttons & 2 ? 0 : BMS_DATA_B3_UP;
347	pThis->port_a \|= pThis->mouse_buttons & 4 ? 0 : BMS_DATA_B2_UP;
348	}
349	/* Immediately clear the IRQ if necessary. */
350	if (pThis->port_c & BMS_CTL_INT_DIS)
351	{
352	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_LOW);
353	pThis->port_c &= ~(BMS_IRQ_BIT(pThis->irq));
354	}
355	}
356
357	static int bms_write_port(MouState *pThis, uint32_t offPort, uint32_t uValue)
358	{
359	int rc = VINF_SUCCESS;
360
361	LogRel3(("%s: write port %d: 0x%02x\n", __PRETTY_FUNCTION__, offPort, uValue));
362
363	switch (offPort)
364	{
365	case BMS_PORT_SIG:
366	/* Update port B. */
367	pThis->port_b = uValue;
368	break;
369	case BMS_PORT_DATA:
370	/* Do nothing, port A is not writable. */
371	break;
372	case BMS_PORT_INIT:
373	pThis->ctrl_port = uValue;
374	break;
375	case BMS_PORT_CTRL:
376	/* Update the high nibble of port C. */
377	pThis->port_c = (uValue & 0xF0) \| (pThis->port_c & 0x0F);
378	bms_update_ctrl(pThis);
379	break;
380	default:
381	AssertMsgFailed(("invalid port %#x\n", offPort));
382	break;
383	}
384	return rc;
385	}
386
387	static uint32_t bms_read_port(MouState *pThis, uint32_t offPort)
388	{
389	uint32_t uValue;
390
391	switch (offPort)
392	{
393	case BMS_PORT_DATA:
394	/* Read port A. */
395	uValue = pThis->port_a;
396	break;
397	case BMS_PORT_SIG:
398	/* Read port B. */
399	uValue = pThis->port_b;
400	break;
401	case BMS_PORT_CTRL:
402	/* Read port C. */
403	uValue = pThis->port_c;
404	/* Some Microsoft driver code reads the control port 10,000 times when
405	* determining the IRQ level. This can occur faster than the IRQ line
406	* transitions and the detection fails. To work around this, we force
407	* the IRQ bit to toggle every once in a while.
408	*/
409	if (pThis->irq_toggle_counter)
410	pThis->irq_toggle_counter--;
411	else
412	{
413	pThis->irq_toggle_counter = 1000;
414	uValue ^= BMS_IRQ_BIT(pThis->irq);
415	}
416	break;
417	case BMS_PORT_INIT:
418	/* Read the 8255A control port. */
419	uValue = pThis->ctrl_port;
420	break;
421	default:
422	AssertMsgFailed(("invalid port %#x\n", offPort));
423	uValue = 0xff;
424	break;
425	}
426	LogRel3(("%s: read port %d: 0x%02x\n", __PRETTY_FUNCTION__, offPort, uValue));
427	return uValue;
428	}
429
430	/**
431	* Port I/O Handler for port IN operations.
432	*
433	* @returns VBox status code.
434	*
435	* @param pDevIns The device instance.
436	* @param pvUser User argument - ignored.
437	* @param Port Port number used for the IN operation.
438	* @param pu32 Where to store the result.
439	* @param cb Number of bytes read.
440	*/
441	PDMBOTHCBDECL(int) mouIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
442	{
443	NOREF(pvUser);
444	if (cb == 1)
445	{
446	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
447	*pu32 = bms_read_port(pThis, Port & 3);
448	Log2(("mouIOPortRead: Port=%#x cb=%d pu32=%#x\n", Port, cb, pu32));
449	return VINF_SUCCESS;
450	}
451	AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb));
452	return VERR_IOM_IOPORT_UNUSED;
453	}
454
455	/**
456	* Port I/O Handler for port OUT operations.
457	*
458	* @returns VBox status code.
459	*
460	* @param pDevIns The device instance.
461	* @param pvUser User argument - ignored.
462	* @param Port Port number used for the IN operation.
463	* @param u32 The value to output.
464	* @param cb The value size in bytes.
465	*/
466	PDMBOTHCBDECL(int) mouIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
467	{
468	int rc = VINF_SUCCESS;
469	NOREF(pvUser);
470	if (cb == 1)
471	{
472	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
473	rc = bms_write_port(pThis, Port & 3, u32);
474	Log2(("mouIOPortWrite: Port=%#x cb=%d u32=%#x\n", Port, cb, u32));
475	}
476	else
477	AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb));
478	return rc;
479	}
480
481	# ifdef IN_RING3
482
483	/**
484	* Saves the state of the device.
485	*
486	* @returns VBox status code.
487	* @param pDevIns The device instance.
488	* @param pSSMHandle The handle to save the state to.
489	*/
490	static DECLCALLBACK(int) mouSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
491	{
492	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
493
494	/* 8255A state. */
495	SSMR3PutU8(pSSMHandle, pThis->port_a);
496	SSMR3PutU8(pSSMHandle, pThis->port_b);
497	SSMR3PutU8(pSSMHandle, pThis->port_c);
498	SSMR3PutU8(pSSMHandle, pThis->ctrl_port);
499	/* Other device state. */
500	SSMR3PutU8(pSSMHandle, pThis->cnt_held);
501	SSMR3PutU8(pSSMHandle, pThis->held_dx);
502	SSMR3PutU8(pSSMHandle, pThis->held_dy);
503	SSMR3PutU8(pSSMHandle, pThis->irq);
504	SSMR3PutU32(pSSMHandle, pThis->cTimerPeriodMs);
505	/* Current mouse state deltas. */
506	SSMR3PutS32(pSSMHandle, pThis->mouse_dx);
507	SSMR3PutS32(pSSMHandle, pThis->mouse_dy);
508	SSMR3PutU8(pSSMHandle, pThis->mouse_buttons_reported);
509	/* Timer. */
510	return TMR3TimerSave(pThis->MouseTimer, pSSMHandle);
511	}
512
513	/**
514	* Loads a saved device state.
515	*
516	* @returns VBox status code.
517	* @param pDevIns The device instance.
518	* @param pSSMHandle The handle to the saved state.
519	* @param uVersion The data unit version number.
520	* @param uPass The data pass.
521	*/
522	static DECLCALLBACK(int) mouLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
523	{
524	int rc;
525	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
526
527	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
528
529	if (uVersion > BMS_SAVED_STATE_VERSION)
530	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
531
532	/* 8255A state. */
533	SSMR3GetU8(pSSMHandle, &pThis->port_a);
534	SSMR3GetU8(pSSMHandle, &pThis->port_b);
535	SSMR3GetU8(pSSMHandle, &pThis->port_c);
536	SSMR3GetU8(pSSMHandle, &pThis->ctrl_port);
537	/* Other device state. */
538	SSMR3GetU8(pSSMHandle, &pThis->cnt_held);
539	SSMR3GetU8(pSSMHandle, &pThis->held_dx);
540	SSMR3GetU8(pSSMHandle, &pThis->held_dy);
541	SSMR3GetU8(pSSMHandle, &pThis->irq);
542	SSMR3GetU32(pSSMHandle, &pThis->cTimerPeriodMs);
543	/* Current mouse state deltas. */
544	SSMR3GetS32(pSSMHandle, &pThis->mouse_dx);
545	SSMR3GetS32(pSSMHandle, &pThis->mouse_dy);
546	SSMR3GetU8(pSSMHandle, &pThis->mouse_buttons_reported);
547	/* Timer. */
548	rc = TMR3TimerLoad(pThis->MouseTimer, pSSMHandle);
549	return rc;
550	}
551
552	/**
553	* Reset notification.
554	*
555	* @returns VBox status code.
556	* @param pDevIns The device instance data.
557	*/
558	static DECLCALLBACK(void) mouReset(PPDMDEVINS pDevIns)
559	{
560	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
561
562	/* Reinitialize the timer. */
563	pThis->cTimerPeriodMs = BMS_IRQ_PERIOD_MS / 2;
564	TMTimerSetMillies(pThis->MouseTimer, pThis->cTimerPeriodMs);
565
566	bms_reset(pThis);
567	}
568
569
570	/* -=-=-=-=-=- Mouse: IBase -=-=-=-=-=- */
571
572	/**
573	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
574	*/
575	static DECLCALLBACK(void ) mouQueryMouseInterface(PPDMIBASE pInterface, const char pszIID)
576	{
577	MouState *pThis = RT_FROM_MEMBER(pInterface, MouState, Mouse.IBase);
578	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Mouse.IBase);
579	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUSEPORT, &pThis->Mouse.IPort);
580	return NULL;
581	}
582
583
584	/* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */
585
586	/**
587	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEvent}
588	*/
589	static DECLCALLBACK(int) mouPutEvent(PPDMIMOUSEPORT pInterface, int32_t dx,
590	int32_t dy, int32_t dz, int32_t dw,
591	uint32_t fButtons)
592	{
593	MouState *pThis = RT_FROM_MEMBER(pInterface, MouState, Mouse.IPort);
594	int rc = PDMCritSectEnter(pThis->CTX_SUFF(pDevIns)->CTX_SUFF(pCritSectRo), VERR_SEM_BUSY);
595	AssertReleaseRC(rc);
596
597	bms_mouse_event(pThis, dx, dy, dz, dw, fButtons);
598
599	PDMCritSectLeave(pThis->CTX_SUFF(pDevIns)->CTX_SUFF(pCritSectRo));
600	return VINF_SUCCESS;
601	}
602
603	/**
604	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventAbs}
605	*/
606	static DECLCALLBACK(int) mouPutEventAbs(PPDMIMOUSEPORT pInterface, uint32_t x, uint32_t y,
607	int32_t dz, int32_t dw, uint32_t fButtons)
608	{
609	RT_NOREF(pInterface, x, y, dz, dw, fButtons);
610	AssertFailedReturn(VERR_NOT_SUPPORTED);
611	}
612
613	/**
614	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventMultiTouch}
615	*/
616	static DECLCALLBACK(int) mouPutEventMultiTouch(PPDMIMOUSEPORT pInterface, uint8_t cContacts,
617	const uint64_t *pau64Contacts, uint32_t u32ScanTime)
618	{
619	RT_NOREF(pInterface, cContacts, pau64Contacts, u32ScanTime);
620	AssertFailedReturn(VERR_NOT_SUPPORTED);
621	}
622
623	/* -=-=-=-=-=- setup code -=-=-=-=-=- */
624
625
626	/**
627	* Attach command.
628	*
629	* This is called to let the device attach to a driver for a specified LUN
630	* during runtime. This is not called during VM construction, the device
631	* constructor have to attach to all the available drivers.
632	*
633	* This is like plugging in the mouse after turning on the PC.
634	*
635	* @returns VBox status code.
636	* @param pDevIns The device instance.
637	* @param iLUN The logical unit which is being detached.
638	* @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
639	* @remark The controller doesn't support this action, this is just
640	* implemented to try out the driver<->device structure.
641	*/
642	static DECLCALLBACK(int) mouAttach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
643	{
644	int rc;
645	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
646
647	AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG,
648	("Bus mouse device does not support hotplugging\n"),
649	VERR_INVALID_PARAMETER);
650
651	switch (iLUN)
652	{
653	/* LUN #0: mouse */
654	case 0:
655	rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->Mouse.IBase, &pThis->Mouse.pDrvBase, "Bus Mouse Port");
656	if (RT_SUCCESS(rc))
657	{
658	pThis->Mouse.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Mouse.pDrvBase, PDMIMOUSECONNECTOR);
659	if (!pThis->Mouse.pDrv)
660	{
661	AssertLogRelMsgFailed(("LUN #0 doesn't have a mouse interface! rc=%Rrc\n", rc));
662	rc = VERR_PDM_MISSING_INTERFACE;
663	}
664	}
665	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
666	{
667	Log(("%s/%d: warning: no driver attached to LUN #0!\n", pDevIns->pReg->szName, pDevIns->iInstance));
668	rc = VINF_SUCCESS;
669	}
670	else
671	AssertLogRelMsgFailed(("Failed to attach LUN #0! rc=%Rrc\n", rc));
672	break;
673
674	default:
675	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
676	return VERR_PDM_NO_SUCH_LUN;
677	}
678
679	return rc;
680	}
681
682
683	/**
684	* Detach notification.
685	*
686	* This is called when a driver is detaching itself from a LUN of the device.
687	* The device should adjust it's state to reflect this.
688	*
689	* This is like unplugging the network cable to use it for the laptop or
690	* something while the PC is still running.
691	*
692	* @param pDevIns The device instance.
693	* @param iLUN The logical unit which is being detached.
694	* @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
695	* @remark The controller doesn't support this action, this is just
696	* implemented to try out the driver<->device structure.
697	*/
698	static DECLCALLBACK(void) mouDetach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
699	{
700	#if 0
701	/*
702	* Reset the interfaces and update the controller state.
703	*/
704	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
705	switch (iLUN)
706	{
707	/* LUN #0: mouse */
708	case 0:
709	pThis->Mouse.pDrv = NULL;
710	pThis->Mouse.pDrvBase = NULL;
711	break;
712
713	default:
714	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
715	break;
716	}
717	#else
718	RT_NOREF(pDevIns, iLUN, fFlags);
719	#endif
720	}
721
722
723	/**
724	* @copydoc FNPDMDEVRELOCATE
725	*/
726	static DECLCALLBACK(void) mouRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
727	{
728	RT_NOREF(offDelta);
729	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
730	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
731	}
732
733
734	/**
735	* @interface_method_impl{PDMDEVREG,pfnConstruct}
736	*/
737	static DECLCALLBACK(int) mouConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
738	{
739	RT_NOREF(iInstance);
740	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
741	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
742	int rc;
743	bool fGCEnabled;
744	bool fR0Enabled;
745	uint8_t irq_lvl;
746	Assert(iInstance == 0);
747
748
749	/*
750	* Validate and read the configuration.
751	*/
752	if (!CFGMR3AreValuesValid(pCfg, "IRQ\0GCEnabled\0R0Enabled\0"))
753	return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
754	rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true);
755	if (RT_FAILURE(rc))
756	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"GCEnabled\" from the config"));
757	rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true);
758	if (RT_FAILURE(rc))
759	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"R0Enabled\" from the config"));
760	rc = CFGMR3QueryU8Def(pCfg, "IRQ", &irq_lvl, BMS_DEFAULT_IRQ);
761	if (RT_FAILURE(rc))
762	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"IRQ\" from the config"));
763	if ((irq_lvl < 2) \|\| (irq_lvl > 5))
764	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Invalid \"IRQ\" config setting"));
765
766	pThis->irq = irq_lvl;
767	/// @todo remove after properly enabling RC/GC support
768	fGCEnabled = fR0Enabled = false;
769	Log(("busmouse: IRQ=%d fGCEnabled=%RTbool fR0Enabled=%RTbool\n", irq_lvl, fGCEnabled, fR0Enabled));
770
771	/*
772	* Initialize the interfaces.
773	*/
774	pThis->pDevInsR3 = pDevIns;
775	pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
776	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
777	pThis->Mouse.IBase.pfnQueryInterface = mouQueryMouseInterface;
778	pThis->Mouse.IPort.pfnPutEvent = mouPutEvent;
779	pThis->Mouse.IPort.pfnPutEventAbs = mouPutEventAbs;
780	pThis->Mouse.IPort.pfnPutEventMultiTouch = mouPutEventMultiTouch;
781
782	/*
783	* Create the interrupt timer.
784	*/
785	rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL, bmsTimerCallback,
786	pThis, TMTIMER_FLAGS_DEFAULT_CRIT_SECT,
787	"Bus Mouse Timer", &pThis->MouseTimer);
788	if (RT_FAILURE(rc))
789	return rc;
790
791	/*
792	* Register I/O ports, saved state, and mouse event handlers.
793	*/
794	rc = PDMDevHlpIOPortRegister(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, NULL, mouIOPortWrite, mouIOPortRead, NULL, NULL, "Bus Mouse");
795	if (RT_FAILURE(rc))
796	return rc;
797	if (fGCEnabled)
798	{
799	rc = PDMDevHlpIOPortRegisterRC(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, 0, "mouIOPortWrite", "mouIOPortRead", NULL, NULL, "Bus Mouse");
800	if (RT_FAILURE(rc))
801	return rc;
802	}
803	if (fR0Enabled)
804	{
805	rc = PDMDevHlpIOPortRegisterR0(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, 0, "mouIOPortWrite", "mouIOPortRead", NULL, NULL, "Bus Mouse");
806	if (RT_FAILURE(rc))
807	return rc;
808	}
809	rc = PDMDevHlpSSMRegister(pDevIns, BMS_SAVED_STATE_VERSION, sizeof(*pThis), mouSaveExec, mouLoadExec);
810	if (RT_FAILURE(rc))
811	return rc;
812
813	/*
814	* Attach to the mouse driver.
815	*/
816	rc = mouAttach(pDevIns, 0, PDM_TACH_FLAGS_NOT_HOT_PLUG);
817	if (RT_FAILURE(rc))
818	return rc;
819
820	/*
821	* Initialize the device state.
822	*/
823	mouReset(pDevIns);
824
825	return VINF_SUCCESS;
826	}
827
828
829	/**
830	* The device registration structure.
831	*/
832	const PDMDEVREG g_DeviceBusMouse =
833	{
834	/* u32Version */
835	PDM_DEVREG_VERSION,
836	/* szName */
837	"busmouse",
838	/* szRCMod */
839	"VBoxDDRC.rc",
840	/* szR0Mod */
841	"VBoxDDR0.r0",
842	/* pszDescription */
843	"Microsoft Bus Mouse controller. "
844	"LUN #0 is the mouse connector.",
845	/* fFlags */
846	PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT \| PDM_DEVREG_FLAGS_GUEST_BITS_32_64 \| PDM_DEVREG_FLAGS_PAE36
847	\| PDM_DEVREG_FLAGS_RC \| PDM_DEVREG_FLAGS_R0,
848	/* fClass */
849	PDM_DEVREG_CLASS_INPUT,
850	/* cMaxInstances */
851	1,
852	/* cbInstance */
853	sizeof(MouState),
854	/* pfnConstruct */
855	mouConstruct,
856	/* pfnDestruct */
857	NULL,
858	/* pfnRelocate */
859	mouRelocate,
860	/* pfnMemSetup */
861	NULL,
862	/* pfnPowerOn */
863	NULL,
864	/* pfnReset */
865	mouReset,
866	/* pfnSuspend */
867	NULL,
868	/* pfnResume */
869	NULL,
870	/* pfnAttach */
871	mouAttach,
872	/* pfnDetach */
873	mouDetach,
874	/* pfnQueryInterface. */
875	NULL,
876	/* pfnInitComplete */
877	NULL,
878	/* pfnPowerOff */
879	NULL,
880	/* pfnSoftReset */
881	NULL,
882	/* u32VersionEnd */
883	PDM_DEVREG_VERSION
884	};
885
886	#ifdef VBOX_IN_EXTPACK_R3
887	/**
888	* @callback_method_impl{FNPDMVBOXDEVICESREGISTER}
889	*/
890	extern "C" DECLEXPORT(int) VBoxDevicesRegister(PPDMDEVREGCB pCallbacks, uint32_t u32Version)
891	{
892	AssertLogRelMsgReturn(u32Version >= VBOX_VERSION,
893	("u32Version=%#x VBOX_VERSION=%#x\n", u32Version, VBOX_VERSION),
894	VERR_EXTPACK_VBOX_VERSION_MISMATCH);
895	AssertLogRelMsgReturn(pCallbacks->u32Version == PDM_DEVREG_CB_VERSION,
896	("pCallbacks->u32Version=%#x PDM_DEVREG_CB_VERSION=%#x\n", pCallbacks->u32Version, PDM_DEVREG_CB_VERSION),
897	VERR_VERSION_MISMATCH);
898
899	return pCallbacks->pfnRegister(pCallbacks, &g_DeviceBusMouse);
900	}
901	#endif /* VBOX_IN_EXTPACK_R3 */
902
903	# endif /* IN_RING3 */
904	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
905

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ExtPacks/BusMouseSample/BusMouse.cpp@ 77110

Download in other formats: