source: vbox/trunk/src/VBox/Devices/testcase/Makefile.kmk@ 62956

# $Id: Makefile.kmk 62576 2016-07-27 09:21:44Z vboxsync $
## @file
# Sub-Makefile for the device testcases.
#

#
# Copyright (C) 2006-2016 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

SUB_DEPTH = ../../../..
include $(KBUILD_PATH)/subheader.kmk

#
# Globals
#
VBOX_PATH_DEVICES_SRC ?= $(PATH_ROOT)/src/VBox/Devices
VBOX_PATH_VMM_DEVICES_SRC ?= $(PATH_ROOT)/src/VBox/VMM/include
VBOX_DEVICES_TEST_OUT_DIR := $(PATH_TARGET)/Devices/testcase
BLDDIRS += $(VBOX_DEVICES_TEST_OUT_DIR)

VBOX_DEVICES_TESTS_FEATURES = \
        $(if $(VBOX_WITH_AHCI),VBOX_WITH_AHCI,) \
        $(if $(VBOX_WITH_BUSLOGIC),VBOX_WITH_BUSLOGIC,) \
        $(if $(VBOX_WITH_CRHGSMI),VBOX_WITH_CRHGSMI,) \
        $(if $(VBOX_WITH_E1000),VBOX_WITH_E1000,) \
        $(if $(VBOX_WITH_EHCI_IMPL),VBOX_WITH_EHCI_IMPL,) \
        $(if $(VBOX_WITH_HGSMI),VBOX_WITH_HGSMI,) \
        $(if $(VBOX_WITH_LSILOGIC),VBOX_WITH_LSILOGIC,) \
        $(if $(VBOX_WITH_NEW_APIC),VBOX_WITH_NEW_APIC,) \
        $(if $(VBOX_WITH_NEW_IOAPIC),VBOX_WITH_NEW_IOAPIC,) \
        $(if $(VBOX_WITH_NVME_IMPL),VBOX_WITH_NVME_IMPL,) \
        $(if $(VBOX_WITH_PCI_PASSTHROUGH_IMPL),VBOX_WITH_PCI_PASSTHROUGH_IMPL,) \
        $(if $(VBOX_WITH_RAW_MODE),VBOX_WITH_RAW_MODE,) \
        $(if $(VBOX_WITH_SCSI),VBOX_WITH_SCSI,) \
        $(if $(VBOX_WITH_USB),VBOX_WITH_USB,) \
        $(if $(VBOX_WITH_VDMA),VBOX_WITH_VDMA,) \
        $(if $(VBOX_WITH_VIDEOHWACCEL),VBOX_WITH_VIDEOHWACCEL,) \
        $(if $(VBOX_WITH_VIRTIO),VBOX_WITH_VIRTIO,) \
        $(if $(VBOX_WITH_VMSVGA),VBOX_WITH_VMSVGA,) \
        $(if $(VBOX_WITH_WDDM),VBOX_WITH_WDDM,) \
        $(if $(VBOX_WITH_XHCI_IMPL),VBOX_WITH_XHCI_IMPL,)

#
# We setup one 'other' target for executing the structure & alignment
# validation testcases. Perhaps a bit hackish, but extremely useful.
#
ifeq ($(KBUILD_TARGET),$(KBUILD_HOST))
 ifeq ($(filter-out x86.x86 amd64.amd64 x86.amd64, $(KBUILD_TARGET_ARCH).$(KBUILD_HOST_ARCH)),)
  OTHERS += \
        $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSize.run
 endif
endif

# The normal testing pass.
TESTING += \
        $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSize.run

ifdef VBOX_WITH_RAW_MODE
 #
 # The testcase generator.
 #
 PROGRAMS += tstDeviceStructSizeRC
 tstDeviceStructSizeRC_TEMPLATE  = VBoxRcExe
 tstDeviceStructSizeRC_DEFS      = $(VBOX_DEVICES_TESTS_FEATURES)
 tstDeviceStructSizeRC_SOURCES   = tstDeviceStructSizeRC.cpp
 tstDeviceStructSizeRC_INCS      = \
        $(VBOX_PATH_DEVICES_SRC)/build \
        $(VBOX_PATH_DEVICES_SRC)/Bus \
        $(VBOX_DEVICES_TEST_OUT_DIR)
 ifdef VBOX_WITH_NEW_APIC
 tstDeviceStructSizeRC_INCS     += $(VBOX_PATH_VMM_DEVICES_SRC)
 endif
endif # VBOX_WITH_RAW_MODE

#
# The testcase it self.
#
PROGRAMS += tstDeviceStructSize
tstDeviceStructSize_TEMPLATE = VBOXR3AUTOTST
tstDeviceStructSize_DEFS     = $(VBOX_DEVICES_TESTS_FEATURES)
tstDeviceStructSize_INCS     = \
        $(VBOX_PATH_DEVICES_SRC)/build \
        $(VBOX_PATH_DEVICES_SRC)/Bus \
        $(VBOX_DEVICES_TEST_OUT_DIR)
tstDeviceStructSize_SOURCES  = tstDeviceStructSize.cpp
tstDeviceStructSize_CLEAN    = \
        $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSizeRC.h \
        $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSize.run
ifdef VBOX_WITH_RAW_MODE
 tstDeviceStructSize.cpp_DEPS = $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSizeRC.h
endif
ifdef VBOX_WITH_NEW_APIC
 tstDeviceStructSize_INCS     += $(VBOX_PATH_VMM_DEVICES_SRC)
endif

#
# Run rule for tstDeviceStructSize.
#

# 1. Dump selected structure in the VMMRC.rc debug info.
# 2. Generate a testcase from the dump
## future

ifdef VBOX_WITH_RAW_MODE
# 1&2. Manually dump selected structures and members.
$(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSizeRC.h: $$(tstDeviceStructSizeRC_1_STAGE_TARGET) | $$(dir $$@)
        $(call MSG_GENERATE,,$@)
        $(QUIET)$(REDIRECT) -wo $@ -- $^
endif

# 3. run it.
$(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSize.run: $$(tstDeviceStructSize_1_STAGE_TARGET) | $$(dir $$@)
        $(QUIET)$(RM) -f $@
        $^
        $(QUIET)$(APPEND) "$@" "done"

# alias for the struct test.
run-struct-tests: $(VBOX_DEVICES_TEST_OUT_DIR)/tstDeviceStructSize.run


include $(FILE_KBUILD_SUB_FOOTER)