DrvVUSBRootHub.cpp@ 65919

Last change on this file since 65919 was 64766, checked in by vboxsync, 8 years ago
src/VBox: Make the use of the iterator for RTListForEach()/RTListForEachSafe() more obvious. There is no need to initialize the iterator and we also must not depend on the iterator being NULL if the list was empty.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 72.4 KB

Line
1	/* $Id: DrvVUSBRootHub.cpp 64766 2016-11-30 10:59:48Z vboxsync $ */
2	/** @file
3	* Virtual USB - Root Hub Driver.
4	*/
5
6	/*
7	* Copyright (C) 2005-2016 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	/** @page pg_dev_vusb VUSB - Virtual USB
20	*
21	* @todo read thru this and correct typos. Merge with old docs.
22	*
23	*
24	* The Virtual USB component glues USB devices and host controllers together.
25	* The VUSB takes the form of a PDM driver which is attached to the HCI. USB
26	* devices are created by, attached to, and managed by the VUSB roothub. The
27	* VUSB also exposes an interface which is used by Main to attach and detach
28	* proxied USB devices.
29	*
30	*
31	* @section sec_dev_vusb_urb The Life of an URB
32	*
33	* The URB is created when the HCI calls the roothub (VUSB) method pfnNewUrb.
34	* VUSB has a pool of URBs, if no free URBs are available a new one is
35	* allocated. The returned URB starts life in the ALLOCATED state and all
36	* fields are initialized with sensible defaults.
37	*
38	* The HCI then copies any request data into the URB if it's an host2dev
39	* transfer. It then submits the URB by calling the pfnSubmitUrb roothub
40	* method.
41	*
42	* pfnSubmitUrb will start by checking if it knows the device address, and if
43	* it doesn't the URB is completed with a device-not-ready error. When the
44	* device address is known to it, action is taken based on the kind of
45	* transfer it is. There are four kinds of transfers: 1. control, 2. bulk,
46	* 3. interrupt, and 4. isochronous. In either case something eventually ends
47	* up being submitted to the device.
48	*
49	*
50	* If an URB fails submitting, may or may not be completed. This depends on
51	* heuristics in some cases and on the kind of failure in others. If
52	* pfnSubmitUrb returns a failure, the HCI should retry submitting it at a
53	* later time. If pfnSubmitUrb returns success the URB is submitted, and it
54	* can even been completed.
55	*
56	* The URB is in the IN_FLIGHT state from the time it's successfully submitted
57	* and till it's reaped or cancelled.
58	*
59	* When an URB transfer or in some case submit failure occurs, the pfnXferError
60	* callback of the HCI is consulted about what to do. If pfnXferError indicates
61	* that the URB should be retried, pfnSubmitUrb will fail. If it indicates that
62	* it should fail, the URB will be completed.
63	*
64	* Completing an URB means that the URB status is set and the HCI
65	* pfnXferCompletion callback is invoked with the URB. The HCI is the supposed
66	* to report the transfer status to the guest OS. After completion the URB
67	* is freed and returned to the pool, unless it was cancelled. If it was
68	* cancelled it will have to await reaping before it's actually freed.
69	*
70	*
71	* @subsection subsec_dev_vusb_urb_ctrl Control
72	*
73	* The control transfer is the most complex one, from VUSB's point of view,
74	* with its three stages and being bi-directional. A control transfer starts
75	* with a SETUP packet containing the request description and two basic
76	* parameters. It is followed by zero or more DATA packets which either picks
77	* up incoming data (dev2host) or supplies the request data (host2dev). This
78	* can then be followed by a STATUS packet which gets the status of the whole
79	* transfer.
80	*
81	* What makes the control transfer complicated is that for a host2dev request
82	* the URB is assembled from the SETUP and DATA stage, and for a dev2host
83	* request the returned data must be kept around for the DATA stage. For both
84	* transfer directions the status of the transfer has to be kept around for
85	* the STATUS stage.
86	*
87	* To complicate matters further, VUSB must intercept and in some cases emulate
88	* some of the standard requests in order to keep the virtual device state
89	* correct and provide the correct virtualization of a device.
90	*
91	* @subsection subsec_dev_vusb_urb_bulk Bulk and Interrupt
92	*
93	* The bulk and interrupt transfer types are relativly simple compared to the
94	* control transfer. VUSB is not inspecting the request content or anything,
95	* but passes it down the device.
96	*
97	* @subsection subsec_dev_vusb_urb_isoc Isochronous
98	*
99	* This kind of transfers hasn't yet been implemented.
100	*
101	*/
102
103
104	/** @page pg_dev_vusb_old VUSB - Virtual USB Core
105	*
106	* The virtual USB core is controlled by the roothub and the underlying HCI
107	* emulator, it is responsible for device addressing, managing configurations,
108	* interfaces and endpoints, assembling and splitting multi-part control
109	* messages and in general acts as a middle layer between the USB device
110	* emulation code and USB HCI emulation code.
111	*
112	* All USB devices are represented by a struct vusb_dev. This structure
113	* contains things like the device state, device address, all the configuration
114	* descriptors, the currently selected configuration and a mapping between
115	* endpoint addresses and endpoint descriptors.
116	*
117	* Each vusb_dev also has a pointer to a vusb_dev_ops structure which serves as
118	* the virtual method table and includes a virtual constructor and destructor.
119	* After a vusb_dev is created it may be attached to a hub device such as a
120	* roothub (using vusbHubAttach). Although each hub structure has cPorts
121	* and cDevices fields, it is the responsibility of the hub device to allocate
122	* a free port for the new device.
123	*
124	* Devices can chose one of two interfaces for dealing with requests, the
125	* synchronous interface or the asynchronous interface. The synchronous
126	* interface is much simpler and ought to be used for devices which are
127	* unlikely to sleep for long periods in order to serve requests. The
128	* asynchronous interface on the other hand is more difficult to use but is
129	* useful for the USB proxy or if one were to write a mass storage device
130	* emulator. Currently the synchronous interface only supports control and bulk
131	* endpoints and is no longer used by anything.
132	*
133	* In order to use the asynchronous interface, the queue_urb, cancel_urb and
134	* pfnUrbReap fields must be set in the devices vusb_dev_ops structure. The
135	* queue_urb method is used to submit a request to a device without blocking,
136	* it returns 1 if successful and 0 on any kind of failure. A successfully
137	* queued URB is completed when the pfnUrbReap method returns it. Each function
138	* address is reference counted so that pfnUrbReap will only be called if there
139	* are URBs outstanding. For a roothub to reap an URB from any one of it's
140	* devices, the vusbRhReapAsyncUrbs() function is used.
141	*
142	* There are four types of messages an URB may contain:
143	* -# Control - represents a single packet of a multi-packet control
144	* transfer, these are only really used by the host controller to
145	* submit the parts to the usb core.
146	* -# Message - the usb core assembles multiple control transfers in
147	* to single message transfers. In this case the data buffer
148	* contains the setup packet in little endian followed by the full
149	* buffer. In the case of an host-to-device control message, the
150	* message packet is created when the STATUS transfer is seen. In
151	* the case of device-to-host messages, the message packet is
152	* created after the SETUP transfer is seen. Also, certain control
153	* requests never go the real device and get handled synchronously.
154	* -# Bulk - Currently the only endpoint type that does error checking
155	* and endpoint halting.
156	* -# Interrupt - The only non-periodic type supported.
157	*
158	* Hubs are special cases of devices, they have a number of downstream ports
159	* that other devices can be attached to and removed from.
160	*
161	* After a device has been attached (vusbHubAttach):
162	* -# The hub attach method is called, which sends a hub status
163	* change message to the OS.
164	* -# The OS resets the device, and it appears on the default
165	* address with it's config 0 selected (a pseudo-config that
166	* contains only 1 interface with 1 endpoint - the default
167	* message pipe).
168	* -# The OS assigns the device a new address and selects an
169	* appropriate config.
170	* -# The device is ready.
171	*
172	* After a device has been detached (vusbDevDetach):
173	* -# All pending URBs are cancelled.
174	* -# The devices address is unassigned.
175	* -# The hub detach method is called which signals the OS
176	* of the status change.
177	* -# The OS unlinks the ED's for that device.
178	*
179	* A device can also request detachment from within its own methods by
180	* calling vusbDevUnplugged().
181	*
182	* Roothubs are responsible for driving the whole system, they are special
183	* cases of hubs and as such implement attach and detach methods, each one
184	* is described by a struct vusb_roothub. Once a roothub has submitted an
185	* URB to the USB core, a number of callbacks to the roothub are required
186	* for when the URB completes, since the roothub typically wants to inform
187	* the OS when transfers are completed.
188	*
189	* There are four callbacks to be concerned with:
190	* -# prepare - This is called after the URB is successfully queued.
191	* -# completion - This is called after the URB completed.
192	* -# error - This is called if the URB errored, some systems have
193	* automatic resubmission of failed requests, so this callback
194	* should keep track of the error count and return 1 if the count
195	* is above the number of allowed resubmissions.
196	* -# halt_ep - This is called after errors on bulk pipes in order
197	* to halt the pipe.
198	*
199	*/
200
201
202	/*********************************************************************************************************************************
203	* Header Files *
204	*********************************************************************************************************************************/
205	#define LOG_GROUP LOG_GROUP_DRV_VUSB
206	#include <VBox/vmm/pdm.h>
207	#include <VBox/vmm/vmapi.h>
208	#include <VBox/err.h>
209	#include <iprt/alloc.h>
210	#include <VBox/log.h>
211	#include <iprt/time.h>
212	#include <iprt/thread.h>
213	#include <iprt/semaphore.h>
214	#include <iprt/string.h>
215	#include <iprt/assert.h>
216	#include <iprt/asm.h>
217	#include <iprt/uuid.h>
218	#include "VUSBInternal.h"
219	#include "VBoxDD.h"
220
221
222
223	/**
224	* Attaches a device to a specific hub.
225	*
226	* This function is called by the vusb_add_device() and vusbRhAttachDevice().
227	*
228	* @returns VBox status code.
229	* @param pHub The hub to attach it to.
230	* @param pDev The device to attach.
231	* @thread EMT
232	*/
233	static int vusbHubAttach(PVUSBHUB pHub, PVUSBDEV pDev)
234	{
235	LogFlow(("vusbHubAttach: pHub=%p[%s] pDev=%p[%s]\n", pHub, pHub->pszName, pDev, pDev->pUsbIns->pszName));
236	AssertMsg(pDev->enmState == VUSB_DEVICE_STATE_DETACHED, ("enmState=%d\n", pDev->enmState));
237
238	pDev->pHub = pHub;
239	pDev->enmState = VUSB_DEVICE_STATE_ATTACHED;
240
241	/* noone else ever messes with the default pipe while we are attached */
242	vusbDevMapEndpoint(pDev, &g_Endpoint0);
243	vusbDevDoSelectConfig(pDev, &g_Config0);
244
245	int rc = pHub->pOps->pfnAttach(pHub, pDev);
246	if (RT_FAILURE(rc))
247	{
248	pDev->pHub = NULL;
249	pDev->enmState = VUSB_DEVICE_STATE_DETACHED;
250	}
251	return rc;
252	}
253
254
255	/* -=-=-=-=-=- PDMUSBHUBREG methods -=-=-=-=-=- */
256
257	/** @interface_method_impl{PDMUSBHUBREG,pfnAttachDevice} */
258	static DECLCALLBACK(int) vusbPDMHubAttachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, const char pszCaptureFilename, uint32_t piPort)
259	{
260	PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
261
262	/*
263	* Allocate a new VUSB device and initialize it.
264	*/
265	PVUSBDEV pDev = (PVUSBDEV)RTMemAllocZ(sizeof(*pDev));
266	AssertReturn(pDev, VERR_NO_MEMORY);
267	int rc = vusbDevInit(pDev, pUsbIns, pszCaptureFilename);
268	if (RT_SUCCESS(rc))
269	{
270	pUsbIns->pvVUsbDev2 = pDev;
271	rc = vusbHubAttach(&pThis->Hub, pDev);
272	if (RT_SUCCESS(rc))
273	{
274	*piPort = UINT32_MAX; /// @todo implement piPort
275	return rc;
276	}
277
278	RTMemFree(pDev->paIfStates);
279	pUsbIns->pvVUsbDev2 = NULL;
280	}
281	vusbDevRelease(pDev);
282	return rc;
283	}
284
285
286	/** @interface_method_impl{PDMUSBHUBREG,pfnDetachDevice} */
287	static DECLCALLBACK(int) vusbPDMHubDetachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, uint32_t iPort)
288	{
289	RT_NOREF(pDrvIns, iPort);
290	PVUSBDEV pDev = (PVUSBDEV)pUsbIns->pvVUsbDev2;
291	Assert(pDev);
292
293	/*
294	* Deal with pending async reset.
295	* (anything but reset)
296	*/
297	vusbDevSetStateCmp(pDev, VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_RESET);
298
299	/*
300	* Detach and free resources.
301	*/
302	if (pDev->pHub)
303	vusbDevDetach(pDev);
304
305	vusbDevRelease(pDev);
306	return VINF_SUCCESS;
307	}
308
309	/**
310	* The hub registration structure.
311	*/
312	static const PDMUSBHUBREG g_vusbHubReg =
313	{
314	PDM_USBHUBREG_VERSION,
315	vusbPDMHubAttachDevice,
316	vusbPDMHubDetachDevice,
317	PDM_USBHUBREG_VERSION
318	};
319
320
321	/* -=-=-=-=-=- VUSBIROOTHUBCONNECTOR methods -=-=-=-=-=- */
322
323
324	/**
325	* Finds an device attached to a roothub by it's address.
326	*
327	* @returns Pointer to the device.
328	* @returns NULL if not found.
329	* @param pRh Pointer to the root hub.
330	* @param Address The device address.
331	*/
332	static PVUSBDEV vusbRhFindDevByAddress(PVUSBROOTHUB pRh, uint8_t Address)
333	{
334	unsigned iHash = vusbHashAddress(Address);
335	PVUSBDEV pDev = NULL;
336
337	RTCritSectEnter(&pRh->CritSectDevices);
338	for (PVUSBDEV pCur = pRh->apAddrHash[iHash]; pCur; pCur = pCur->pNextHash)
339	if (pCur->u8Address == Address)
340	{
341	pDev = pCur;
342	break;
343	}
344
345	if (pDev)
346	vusbDevRetain(pDev);
347	RTCritSectLeave(&pRh->CritSectDevices);
348	return pDev;
349	}
350
351
352	/**
353	* Callback for freeing an URB.
354	* @param pUrb The URB to free.
355	*/
356	static DECLCALLBACK(void) vusbRhFreeUrb(PVUSBURB pUrb)
357	{
358	/*
359	* Assert sanity.
360	*/
361	vusbUrbAssert(pUrb);
362	PVUSBROOTHUB pRh = (PVUSBROOTHUB)pUrb->pVUsb->pvFreeCtx;
363	Assert(pRh);
364
365	Assert(pUrb->enmState != VUSBURBSTATE_FREE);
366
367	/*
368	* Free the URB description (logging builds only).
369	*/
370	if (pUrb->pszDesc)
371	{
372	RTStrFree(pUrb->pszDesc);
373	pUrb->pszDesc = NULL;
374	}
375
376	/* The URB comes from the roothub if there is no device (invalid address). */
377	if (pUrb->pVUsb->pDev)
378	{
379	PVUSBDEV pDev = pUrb->pVUsb->pDev;
380
381	vusbUrbPoolFree(&pUrb->pVUsb->pDev->UrbPool, pUrb);
382	vusbDevRelease(pDev);
383	}
384	else
385	vusbUrbPoolFree(&pRh->Hub.Dev.UrbPool, pUrb);
386	}
387
388
389	/**
390	* Worker routine for vusbRhConnNewUrb().
391	*/
392	static PVUSBURB vusbRhNewUrb(PVUSBROOTHUB pRh, uint8_t DstAddress, PVUSBDEV pDev, VUSBXFERTYPE enmType,
393	VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag)
394	{
395	RT_NOREF(pszTag);
396	PVUSBURBPOOL pUrbPool = &pRh->Hub.Dev.UrbPool;
397
398	if (!pDev)
399	pDev = vusbRhFindDevByAddress(pRh, DstAddress);
400	else
401	vusbDevRetain(pDev);
402
403	if (pDev)
404	pUrbPool = &pDev->UrbPool;
405
406	PVUSBURB pUrb = vusbUrbPoolAlloc(pUrbPool, enmType, enmDir, cbData,
407	pRh->cbHci, pRh->cbHciTd, cTds);
408	if (RT_LIKELY(pUrb))
409	{
410	pUrb->pVUsb->pvFreeCtx = pRh;
411	pUrb->pVUsb->pfnFree = vusbRhFreeUrb;
412	pUrb->DstAddress = DstAddress;
413	pUrb->pVUsb->pDev = pDev;
414
415	#ifdef LOG_ENABLED
416	const char *pszType = NULL;
417
418	switch(pUrb->enmType)
419	{
420	case VUSBXFERTYPE_CTRL:
421	pszType = "ctrl";
422	break;
423	case VUSBXFERTYPE_INTR:
424	pszType = "intr";
425	break;
426	case VUSBXFERTYPE_BULK:
427	pszType = "bulk";
428	break;
429	case VUSBXFERTYPE_ISOC:
430	pszType = "isoc";
431	break;
432	default:
433	pszType = "invld";
434	break;
435	}
436
437	pRh->iSerial = (pRh->iSerial + 1) % 10000;
438	RTStrAPrintf(&pUrb->pszDesc, "URB %p %s%c%04d (%s)", pUrb, pszType,
439	(pUrb->enmDir == VUSBDIRECTION_IN) ? '<' : ((pUrb->enmDir == VUSBDIRECTION_SETUP) ? 's' : '>'),
440	pRh->iSerial, pszTag ? pszTag : "<none>");
441	#endif
442	}
443
444	return pUrb;
445	}
446
447
448	/**
449	* Calculate frame timer variables given a frame rate.
450	*/
451	static void vusbRhR3CalcTimerIntervals(PVUSBROOTHUB pThis, uint32_t u32FrameRate)
452	{
453	pThis->nsWait = RT_NS_1SEC / u32FrameRate;
454	pThis->uFrameRate = u32FrameRate;
455	/* Inform the HCD about the new frame rate. */
456	pThis->pIRhPort->pfnFrameRateChanged(pThis->pIRhPort, u32FrameRate);
457	}
458
459
460	/**
461	* Calculates the new frame rate based on the idle detection and number of idle
462	* cycles.
463	*
464	* @returns nothing.
465	* @param pThis The roothub instance data.
466	* @param fIdle Flag whether the last frame didn't produce any activity.
467	*/
468	static void vusbRhR3FrameRateCalcNew(PVUSBROOTHUB pThis, bool fIdle)
469	{
470	uint32_t uNewFrameRate = pThis->uFrameRate;
471
472	/*
473	* Adjust the frame timer interval based on idle detection.
474	*/
475	if (fIdle)
476	{
477	pThis->cIdleCycles++;
478	/* Set the new frame rate based on how long we've been idle. Tunable. */
479	switch (pThis->cIdleCycles)
480	{
481	case 4: uNewFrameRate = 500; break; /* 2ms interval */
482	case 16:uNewFrameRate = 125; break; /* 8ms interval */
483	case 24:uNewFrameRate = 50; break; /* 20ms interval */
484	default: break;
485	}
486	/* Avoid overflow. */
487	if (pThis->cIdleCycles > 60000)
488	pThis->cIdleCycles = 20000;
489	}
490	else
491	{
492	if (pThis->cIdleCycles)
493	{
494	pThis->cIdleCycles = 0;
495	uNewFrameRate = pThis->uFrameRateDefault;
496	}
497	}
498
499	if ( uNewFrameRate != pThis->uFrameRate
500	&& uNewFrameRate)
501	{
502	LogFlow(("Frame rate changed from %u to %u\n", pThis->uFrameRate, uNewFrameRate));
503	vusbRhR3CalcTimerIntervals(pThis, uNewFrameRate);
504	}
505	}
506
507
508	/**
509	* The core frame processing routine keeping track of the elapsed time and calling into
510	* the device emulation above us to do the work.
511	*
512	* @returns Relative timespan when to process the next frame.
513	* @param pThis The roothub instance data.
514	* @param fCallback Flag whether this method is called from the URB completion callback or
515	* from the worker thread (only used for statistics).
516	*/
517	DECLHIDDEN(uint64_t) vusbRhR3ProcessFrame(PVUSBROOTHUB pThis, bool fCallback)
518	{
519	uint64_t tsNext = 0;
520	uint64_t tsNanoStart = RTTimeNanoTS();
521
522	/* Don't do anything if we are not supposed to process anything (EHCI and XHCI). */
523	if (!pThis->uFrameRateDefault)
524	return 0;
525
526	if (ASMAtomicXchgBool(&pThis->fFrameProcessing, true))
527	return pThis->nsWait;
528
529	if ( tsNanoStart > pThis->tsFrameProcessed
530	&& tsNanoStart - pThis->tsFrameProcessed >= 750 * RT_NS_1US)
531	{
532	LogFlowFunc(("Starting new frame at ts %llu\n", tsNanoStart));
533
534	bool fIdle = pThis->pIRhPort->pfnStartFrame(pThis->pIRhPort, 0 /* u32FrameNo */);
535	vusbRhR3FrameRateCalcNew(pThis, fIdle);
536
537	uint64_t tsNow = RTTimeNanoTS();
538	tsNext = (tsNanoStart + pThis->nsWait) > tsNow ? (tsNanoStart + pThis->nsWait) - tsNow : 0;
539	pThis->tsFrameProcessed = tsNanoStart;
540	LogFlowFunc(("Current frame took %llu nano seconds to process, next frame in %llu ns\n", tsNow - tsNanoStart, tsNext));
541	if (fCallback)
542	STAM_COUNTER_INC(&pThis->StatFramesProcessedClbk);
543	else
544	STAM_COUNTER_INC(&pThis->StatFramesProcessedThread);
545	}
546	else
547	{
548	tsNext = (pThis->tsFrameProcessed + pThis->nsWait) > tsNanoStart ? (pThis->tsFrameProcessed + pThis->nsWait) - tsNanoStart : 0;
549	LogFlowFunc(("Next frame is too far away in the future, waiting... (tsNanoStart=%llu tsFrameProcessed=%llu)\n",
550	tsNanoStart, pThis->tsFrameProcessed));
551	}
552
553	ASMAtomicXchgBool(&pThis->fFrameProcessing, false);
554	LogFlowFunc(("returns %llu\n", tsNext));
555	return tsNext;
556	}
557
558
559	/**
560	* Worker for processing frames periodically.
561	*
562	* @returns VBox status code.
563	* @param pDrvIns The driver instance.
564	* @param pThread The PDM thread structure for the thread this worker runs on.
565	*/
566	static DECLCALLBACK(int) vusbRhR3PeriodFrameWorker(PPDMDRVINS pDrvIns, PPDMTHREAD pThread)
567	{
568	RT_NOREF(pDrvIns);
569	int rc = VINF_SUCCESS;
570	PVUSBROOTHUB pThis = (PVUSBROOTHUB)pThread->pvUser;
571
572	if (pThread->enmState == PDMTHREADSTATE_INITIALIZING)
573	return VINF_SUCCESS;
574
575	while (pThread->enmState == PDMTHREADSTATE_RUNNING)
576	{
577	while ( !ASMAtomicReadU32(&pThis->uFrameRateDefault)
578	&& pThread->enmState == PDMTHREADSTATE_RUNNING)
579	{
580	/* Signal the waiter that we are stopped now. */
581	rc = RTSemEventMultiSignal(pThis->hSemEventPeriodFrameStopped);
582	AssertRC(rc);
583
584	rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrame, RT_INDEFINITE_WAIT);
585	RTSemEventMultiReset(pThis->hSemEventPeriodFrame);
586
587	/*
588	* Notify the device above about the frame rate changed if we are supposed to
589	* process frames.
590	*/
591	uint32_t uFrameRate = ASMAtomicReadU32(&pThis->uFrameRateDefault);
592	if (uFrameRate)
593	vusbRhR3CalcTimerIntervals(pThis, uFrameRate);
594	}
595
596	AssertLogRelMsgReturn(RT_SUCCESS(rc) \|\| rc == VERR_TIMEOUT, ("%Rrc\n", rc), rc);
597	if (RT_UNLIKELY(pThread->enmState != PDMTHREADSTATE_RUNNING))
598	break;
599
600	uint64_t tsNext = vusbRhR3ProcessFrame(pThis, false /* fCallback */);
601
602	if (tsNext >= 250 * RT_NS_1US)
603	{
604	rc = RTSemEventMultiWaitEx(pThis->hSemEventPeriodFrame, RTSEMWAIT_FLAGS_RELATIVE \| RTSEMWAIT_FLAGS_NANOSECS \| RTSEMWAIT_FLAGS_UNINTERRUPTIBLE,
605	tsNext);
606	AssertLogRelMsg(RT_SUCCESS(rc) \|\| rc == VERR_TIMEOUT, ("%Rrc\n", rc));
607	RTSemEventMultiReset(pThis->hSemEventPeriodFrame);
608	}
609	}
610
611	return VINF_SUCCESS;
612	}
613
614
615	/**
616	* Unblock the periodic frame thread so it can respond to a state change.
617	*
618	* @returns VBox status code.
619	* @param pDrvIns The driver instance.
620	* @param pThread The send thread.
621	*/
622	static DECLCALLBACK(int) vusbRhR3PeriodFrameWorkerWakeup(PPDMDRVINS pDrvIns, PPDMTHREAD pThread)
623	{
624	RT_NOREF(pThread);
625	PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
626	return RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
627	}
628
629
630	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetUrbParams} */
631	static DECLCALLBACK(int) vusbRhSetUrbParams(PVUSBIROOTHUBCONNECTOR pInterface, size_t cbHci, size_t cbHciTd)
632	{
633	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
634
635	pRh->cbHci = cbHci;
636	pRh->cbHciTd = cbHciTd;
637
638	return VINF_SUCCESS;
639	}
640
641
642	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnNewUrb} */
643	static DECLCALLBACK(PVUSBURB) vusbRhConnNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, PVUSBIDEVICE pDev, VUSBXFERTYPE enmType,
644	VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag)
645	{
646	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
647	return vusbRhNewUrb(pRh, DstAddress, (PVUSBDEV)pDev, enmType, enmDir, cbData, cTds, pszTag);
648	}
649
650
651	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnFreeUrb} */
652	static DECLCALLBACK(int) vusbRhConnFreeUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)
653	{
654	RT_NOREF(pInterface);
655	pUrb->pVUsb->pfnFree(pUrb);
656	return VINF_SUCCESS;
657	}
658
659
660	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSubmitUrb} */
661	static DECLCALLBACK(int) vusbRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, PPDMLED pLed)
662	{
663	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
664	STAM_PROFILE_START(&pRh->StatSubmitUrb, a);
665
666	#ifdef VBOX_WITH_STATISTICS
667	/*
668	* Total and per-type submit statistics.
669	*/
670	Assert(pUrb->enmType >= 0 && pUrb->enmType < (int)RT_ELEMENTS(pRh->aTypes));
671	STAM_COUNTER_INC(&pRh->Total.StatUrbsSubmitted);
672	STAM_COUNTER_INC(&pRh->aTypes[pUrb->enmType].StatUrbsSubmitted);
673
674	STAM_COUNTER_ADD(&pRh->Total.StatReqBytes, pUrb->cbData);
675	STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqBytes, pUrb->cbData);
676	if (pUrb->enmDir == VUSBDIRECTION_IN)
677	{
678	STAM_COUNTER_ADD(&pRh->Total.StatReqReadBytes, pUrb->cbData);
679	STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqReadBytes, pUrb->cbData);
680	}
681	else
682	{
683	STAM_COUNTER_ADD(&pRh->Total.StatReqWriteBytes, pUrb->cbData);
684	STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqWriteBytes, pUrb->cbData);
685	}
686
687	if (pUrb->enmType == VUSBXFERTYPE_ISOC)
688	{
689	STAM_COUNTER_ADD(&pRh->StatIsocReqPkts, pUrb->cIsocPkts);
690	if (pUrb->enmDir == VUSBDIRECTION_IN)
691	STAM_COUNTER_ADD(&pRh->StatIsocReqReadPkts, pUrb->cIsocPkts);
692	else
693	STAM_COUNTER_ADD(&pRh->StatIsocReqWritePkts, pUrb->cIsocPkts);
694	}
695	#endif
696
697	/* If there is a sniffer on the roothub record the URB there. */
698	if (pRh->hSniffer != VUSBSNIFFER_NIL)
699	{
700	int rc = VUSBSnifferRecordEvent(pRh->hSniffer, pUrb, VUSBSNIFFEREVENT_SUBMIT);
701	if (RT_FAILURE(rc))
702	LogRel(("VUSB: Capturing URB submit event on the root hub failed with %Rrc\n", rc));
703	}
704
705	/*
706	* The device was resolved when we allocated the URB.
707	* Submit it to the device if we found it, if not fail with device-not-ready.
708	*/
709	int rc;
710	if ( pUrb->pVUsb->pDev
711	&& pUrb->pVUsb->pDev->pUsbIns)
712	{
713	switch (pUrb->enmDir)
714	{
715	case VUSBDIRECTION_IN:
716	pLed->Asserted.s.fReading = pLed->Actual.s.fReading = 1;
717	rc = vusbUrbSubmit(pUrb);
718	pLed->Actual.s.fReading = 0;
719	break;
720	case VUSBDIRECTION_OUT:
721	pLed->Asserted.s.fWriting = pLed->Actual.s.fWriting = 1;
722	rc = vusbUrbSubmit(pUrb);
723	pLed->Actual.s.fWriting = 0;
724	break;
725	default:
726	rc = vusbUrbSubmit(pUrb);
727	break;
728	}
729
730	if (RT_FAILURE(rc))
731	{
732	LogFlow(("vusbRhSubmitUrb: freeing pUrb=%p\n", pUrb));
733	pUrb->pVUsb->pfnFree(pUrb);
734	}
735	}
736	else
737	{
738	vusbDevRetain(&pRh->Hub.Dev);
739	pUrb->pVUsb->pDev = &pRh->Hub.Dev;
740	Log(("vusb: pRh=%p: SUBMIT: Address %i not found!!!\n", pRh, pUrb->DstAddress));
741
742	pUrb->enmState = VUSBURBSTATE_REAPED;
743	pUrb->enmStatus = VUSBSTATUS_DNR;
744	vusbUrbCompletionRh(pUrb);
745	rc = VINF_SUCCESS;
746	}
747
748	STAM_PROFILE_STOP(&pRh->StatSubmitUrb, a);
749	return rc;
750	}
751
752
753	static DECLCALLBACK(int) vusbRhReapAsyncUrbsWorker(PVUSBDEV pDev, RTMSINTERVAL cMillies)
754	{
755	if (!cMillies)
756	vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, 0);
757	else
758	{
759	uint64_t u64Start = RTTimeMilliTS();
760	do
761	{
762	vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, RT_MIN(cMillies >> 8, 10));
763	} while ( !RTListIsEmpty(&pDev->LstAsyncUrbs)
764	&& RTTimeMilliTS() - u64Start < cMillies);
765	}
766
767	return VINF_SUCCESS;
768	}
769
770	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnReapAsyncUrbs} */
771	static DECLCALLBACK(void) vusbRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, RTMSINTERVAL cMillies)
772	{
773	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); NOREF(pRh);
774	PVUSBDEV pDev = (PVUSBDEV)pDevice;
775
776	if (RTListIsEmpty(&pDev->LstAsyncUrbs))
777	return;
778
779	STAM_PROFILE_START(&pRh->StatReapAsyncUrbs, a);
780	int rc = vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhReapAsyncUrbsWorker, 2, pDev, cMillies);
781	AssertRC(rc);
782	STAM_PROFILE_STOP(&pRh->StatReapAsyncUrbs, a);
783	}
784
785
786	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelUrbsEp} */
787	static DECLCALLBACK(int) vusbRhCancelUrbsEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)
788	{
789	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
790	AssertReturn(pRh, VERR_INVALID_PARAMETER);
791	AssertReturn(pUrb, VERR_INVALID_PARAMETER);
792
793	/// @todo This method of URB canceling may not work on non-Linux hosts.
794	/*
795	* Cancel and reap the URB(s) on an endpoint.
796	*/
797	LogFlow(("vusbRhCancelUrbsEp: pRh=%p pUrb=%p\n", pRh, pUrb));
798
799	vusbUrbCancelAsync(pUrb, CANCELMODE_UNDO);
800
801	/* The reaper thread will take care of completing the URB. */
802
803	return VINF_SUCCESS;
804	}
805
806	/**
807	* Worker doing the actual cancelling of all outstanding URBs on the device I/O thread.
808	*
809	* @returns VBox status code.
810	* @param pDev USB device instance data.
811	*/
812	static DECLCALLBACK(int) vusbRhCancelAllUrbsWorker(PVUSBDEV pDev)
813	{
814	/*
815	* Cancel the URBS.
816	*
817	* Not using th CritAsyncUrbs critical section here is safe
818	* as the I/O thread is the only thread accessing this struture at the
819	* moment.
820	*/
821	PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext;
822	RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst)
823	{
824	PVUSBURB pUrb = pVUsbUrb->pUrb;
825	/* Call the worker directly. */
826	vusbUrbCancelWorker(pUrb, CANCELMODE_FAIL);
827	}
828
829	return VINF_SUCCESS;
830	}
831
832	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelAllUrbs} */
833	static DECLCALLBACK(void) vusbRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface)
834	{
835	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
836
837	RTCritSectEnter(&pRh->CritSectDevices);
838	PVUSBDEV pDev = pRh->pDevices;
839	while (pDev)
840	{
841	vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhCancelAllUrbsWorker, 1, pDev);
842	pDev = pDev->pNext;
843	}
844	RTCritSectLeave(&pRh->CritSectDevices);
845	}
846
847	/**
848	* Worker doing the actual cancelling of all outstanding per-EP URBs on the
849	* device I/O thread.
850	*
851	* @returns VBox status code.
852	* @param pDev USB device instance data.
853	* @param EndPt Endpoint number.
854	* @param enmDir Endpoint direction.
855	*/
856	static DECLCALLBACK(int) vusbRhAbortEpWorker(PVUSBDEV pDev, int EndPt, VUSBDIRECTION enmDir)
857	{
858	/*
859	* Iterate the URBs, find ones corresponding to given EP, and cancel them.
860	*/
861	PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext;
862	RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst)
863	{
864	PVUSBURB pUrb = pVUsbUrb->pUrb;
865
866	Assert(pUrb->pVUsb->pDev == pDev);
867
868	/* For the default control EP, direction does not matter. */
869	if (pUrb->EndPt == EndPt && (pUrb->enmDir == enmDir \|\| !EndPt))
870	{
871	LogFlow(("%s: vusbRhAbortEpWorker: CANCELING URB\n", pUrb->pszDesc));
872	int rc = vusbUrbCancelWorker(pUrb, CANCELMODE_UNDO);
873	AssertRC(rc);
874	}
875	}
876
877	return VINF_SUCCESS;
878	}
879
880
881	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAbortEp} */
882	static DECLCALLBACK(int) vusbRhAbortEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, int EndPt, VUSBDIRECTION enmDir)
883	{
884	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
885	if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub)
886	AssertFailedReturn(VERR_INVALID_PARAMETER);
887
888	RTCritSectEnter(&pRh->CritSectDevices);
889	PVUSBDEV pDev = (PVUSBDEV)pDevice;
890	vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhAbortEpWorker, 3, pDev, EndPt, enmDir);
891	RTCritSectLeave(&pRh->CritSectDevices);
892
893	/* The reaper thread will take care of completing the URB. */
894
895	return VINF_SUCCESS;
896	}
897
898
899	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAttachDevice} */
900	static DECLCALLBACK(int) vusbRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
901	{
902	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
903	return vusbHubAttach(&pRh->Hub, (PVUSBDEV)pDevice);
904	}
905
906
907	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDetachDevice} */
908	static DECLCALLBACK(int) vusbRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
909	{
910	PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
911	if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub)
912	AssertFailedReturn(VERR_INVALID_PARAMETER);
913	return vusbDevDetach((PVUSBDEV)pDevice);
914	}
915
916
917	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetPeriodicFrameProcessing} */
918	static DECLCALLBACK(int) vusbRhSetFrameProcessing(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uFrameRate)
919	{
920	int rc = VINF_SUCCESS;
921	PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
922
923	/* Create the frame thread lazily. */
924	if ( !pThis->hThreadPeriodFrame
925	&& uFrameRate)
926	{
927	ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
928	pThis->uFrameRate = uFrameRate;
929	vusbRhR3CalcTimerIntervals(pThis, uFrameRate);
930
931	rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrame);
932	AssertRCReturn(rc, rc);
933
934	rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrameStopped);
935	AssertRCReturn(rc, rc);
936
937	rc = PDMDrvHlpThreadCreate(pThis->pDrvIns, &pThis->hThreadPeriodFrame, pThis, vusbRhR3PeriodFrameWorker,
938	vusbRhR3PeriodFrameWorkerWakeup, 0, RTTHREADTYPE_IO, "VUsbPeriodFrm");
939	AssertRCReturn(rc, rc);
940
941	VMSTATE enmState = PDMDrvHlpVMState(pThis->pDrvIns);
942	if ( enmState == VMSTATE_RUNNING
943	\|\| enmState == VMSTATE_RUNNING_LS
944	\|\| enmState == VMSTATE_RUNNING_FT)
945	{
946	rc = PDMR3ThreadResume(pThis->hThreadPeriodFrame);
947	AssertRCReturn(rc, rc);
948	}
949	}
950	else if ( pThis->hThreadPeriodFrame
951	&& !uFrameRate)
952	{
953	/* Stop processing. */
954	uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
955	if (uFrameRateOld)
956	{
957	rc = RTSemEventMultiReset(pThis->hSemEventPeriodFrameStopped);
958	AssertRC(rc);
959
960	/* Signal the frame thread to stop. */
961	RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
962
963	/* Wait for signal from the thread that it stopped. */
964	rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrameStopped, RT_INDEFINITE_WAIT);
965	AssertRC(rc);
966	}
967	}
968	else if ( pThis->hThreadPeriodFrame
969	&& uFrameRate)
970	{
971	/* Just switch to the new frame rate and let the periodic frame thread pick it up. */
972	uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
973
974	/* Signal the frame thread to continue if it was stopped. */
975	if (!uFrameRateOld)
976	RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
977	}
978
979	return rc;
980	}
981
982
983	/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnGetPeriodicFrameRate} */
984	static DECLCALLBACK(uint32_t) vusbRhGetPriodicFrameRate(PVUSBIROOTHUBCONNECTOR pInterface)
985	{
986	PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
987
988	return pThis->uFrameRate;
989	}
990
991	/* -=-=-=-=-=- VUSB Device methods (for the root hub) -=-=-=-=-=- */
992
993
994	/**
995	* @interface_method_impl{VUSBIDEVICE,pfnReset}
996	*/
997	static DECLCALLBACK(int) vusbRhDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux,
998	PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)
999	{
1000	RT_NOREF(pfnDone, pvUser, pVM);
1001	PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1002	Assert(!pfnDone);
1003	return pRh->pIRhPort->pfnReset(pRh->pIRhPort, fResetOnLinux); /** @todo change rc from bool to vbox status everywhere! */
1004	}
1005
1006
1007	/**
1008	* @interface_method_impl{VUSBIDEVICE,pfnPowerOn}
1009	*/
1010	static DECLCALLBACK(int) vusbRhDevPowerOn(PVUSBIDEVICE pInterface)
1011	{
1012	PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1013	LogFlow(("vusbRhDevPowerOn: pRh=%p\n", pRh));
1014
1015	Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED
1016	&& pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET);
1017
1018	if (pRh->Hub.Dev.enmState == VUSB_DEVICE_STATE_ATTACHED)
1019	pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_POWERED;
1020
1021	return VINF_SUCCESS;
1022	}
1023
1024
1025	/**
1026	* @interface_method_impl{VUSBIDEVICE,pfnPowerOff}
1027	*/
1028	static DECLCALLBACK(int) vusbRhDevPowerOff(PVUSBIDEVICE pInterface)
1029	{
1030	PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1031	LogFlow(("vusbRhDevPowerOff: pRh=%p\n", pRh));
1032
1033	Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED
1034	&& pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET);
1035
1036	/*
1037	* Cancel all URBs and reap them.
1038	*/
1039	VUSBIRhCancelAllUrbs(&pRh->IRhConnector);
1040	RTCritSectEnter(&pRh->CritSectDevices);
1041	PVUSBDEV pDev = pRh->pDevices;
1042	while (pDev)
1043	{
1044	VUSBIRhReapAsyncUrbs(&pRh->IRhConnector, (PVUSBIDEVICE)pDev, 0);
1045	pDev = pDev->pNext;
1046	}
1047	RTCritSectLeave(&pRh->CritSectDevices);
1048
1049	pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED;
1050	return VINF_SUCCESS;
1051	}
1052
1053	/**
1054	* @interface_method_impl{VUSBIDEVICE,pfnGetState}
1055	*/
1056	static DECLCALLBACK(VUSBDEVICESTATE) vusbRhDevGetState(PVUSBIDEVICE pInterface)
1057	{
1058	PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1059	return pRh->Hub.Dev.enmState;
1060	}
1061
1062
1063
1064
1065	/* -=-=-=-=-=- VUSB Hub methods -=-=-=-=-=- */
1066
1067
1068	/**
1069	* Attach the device to the hub.
1070	* Port assignments and all such stuff is up to this routine.
1071	*
1072	* @returns VBox status code.
1073	* @param pHub Pointer to the hub.
1074	* @param pDev Pointer to the device.
1075	*/
1076	static int vusbRhHubOpAttach(PVUSBHUB pHub, PVUSBDEV pDev)
1077	{
1078	PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub;
1079
1080	/*
1081	* Assign a port.
1082	*/
1083	int iPort = ASMBitFirstSet(&pRh->Bitmap, sizeof(pRh->Bitmap) * 8);
1084	if (iPort < 0)
1085	{
1086	LogRel(("VUSB: No ports available!\n"));
1087	return VERR_VUSB_NO_PORTS;
1088	}
1089	ASMBitClear(&pRh->Bitmap, iPort);
1090	pHub->cDevices++;
1091	pDev->i16Port = iPort;
1092
1093	/*
1094	* Call the HCI attach routine and let it have its say before the device is
1095	* linked into the device list of this hub.
1096	*/
1097	int rc = pRh->pIRhPort->pfnAttach(pRh->pIRhPort, &pDev->IDevice, iPort);
1098	if (RT_SUCCESS(rc))
1099	{
1100	RTCritSectEnter(&pRh->CritSectDevices);
1101	pDev->pNext = pRh->pDevices;
1102	pRh->pDevices = pDev;
1103	RTCritSectLeave(&pRh->CritSectDevices);
1104	LogRel(("VUSB: Attached '%s' to port %d\n", pDev->pUsbIns->pszName, iPort));
1105	}
1106	else
1107	{
1108	ASMBitSet(&pRh->Bitmap, iPort);
1109	pHub->cDevices--;
1110	pDev->i16Port = -1;
1111	LogRel(("VUSB: Failed to attach '%s' to port %d, rc=%Rrc\n", pDev->pUsbIns->pszName, iPort, rc));
1112	}
1113	return rc;
1114	}
1115
1116
1117	/**
1118	* Detach the device from the hub.
1119	*
1120	* @returns VBox status code.
1121	* @param pHub Pointer to the hub.
1122	* @param pDev Pointer to the device.
1123	*/
1124	static void vusbRhHubOpDetach(PVUSBHUB pHub, PVUSBDEV pDev)
1125	{
1126	PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub;
1127	Assert(pDev->i16Port != -1);
1128
1129	/*
1130	* Check that it's attached and unlink it from the linked list.
1131	*/
1132	RTCritSectEnter(&pRh->CritSectDevices);
1133	if (pRh->pDevices != pDev)
1134	{
1135	PVUSBDEV pPrev = pRh->pDevices;
1136	while (pPrev && pPrev->pNext != pDev)
1137	pPrev = pPrev->pNext;
1138	Assert(pPrev);
1139	pPrev->pNext = pDev->pNext;
1140	}
1141	else
1142	pRh->pDevices = pDev->pNext;
1143	pDev->pNext = NULL;
1144	RTCritSectLeave(&pRh->CritSectDevices);
1145
1146	/*
1147	* Detach the device and mark the port as available.
1148	*/
1149	unsigned uPort = pDev->i16Port;
1150	pRh->pIRhPort->pfnDetach(pRh->pIRhPort, &pDev->IDevice, uPort);
1151	LogRel(("VUSB: Detached '%s' from port %u\n", pDev->pUsbIns->pszName, uPort));
1152	ASMBitSet(&pRh->Bitmap, uPort);
1153	pHub->cDevices--;
1154	}
1155
1156
1157	/**
1158	* The Hub methods implemented by the root hub.
1159	*/
1160	static const VUSBHUBOPS s_VUsbRhHubOps =
1161	{
1162	vusbRhHubOpAttach,
1163	vusbRhHubOpDetach
1164	};
1165
1166
1167
1168	/* -=-=-=-=-=- PDM Base interface methods -=-=-=-=-=- */
1169
1170
1171	/**
1172	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
1173	*/
1174	static DECLCALLBACK(void ) vusbRhQueryInterface(PPDMIBASE pInterface, const char pszIID)
1175	{
1176	PPDMDRVINS pDrvIns = PDMIBASE_2_PDMDRV(pInterface);
1177	PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1178
1179	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pDrvIns->IBase);
1180	PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIROOTHUBCONNECTOR, &pRh->IRhConnector);
1181	PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIDEVICE, &pRh->Hub.Dev.IDevice);
1182	return NULL;
1183	}
1184
1185
1186	/* -=-=-=-=-=- PDM Driver methods -=-=-=-=-=- */
1187
1188
1189	/**
1190	* Destruct a driver instance.
1191	*
1192	* Most VM resources are freed by the VM. This callback is provided so that any non-VM
1193	* resources can be freed correctly.
1194	*
1195	* @param pDrvIns The driver instance data.
1196	*/
1197	static DECLCALLBACK(void) vusbRhDestruct(PPDMDRVINS pDrvIns)
1198	{
1199	PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1200	PDMDRV_CHECK_VERSIONS_RETURN_VOID(pDrvIns);
1201
1202	vusbUrbPoolDestroy(&pRh->Hub.Dev.UrbPool);
1203	if (pRh->Hub.pszName)
1204	{
1205	RTStrFree(pRh->Hub.pszName);
1206	pRh->Hub.pszName = NULL;
1207	}
1208	if (pRh->hSniffer != VUSBSNIFFER_NIL)
1209	VUSBSnifferDestroy(pRh->hSniffer);
1210
1211	if (pRh->hSemEventPeriodFrame)
1212	RTSemEventMultiDestroy(pRh->hSemEventPeriodFrame);
1213
1214	if (pRh->hSemEventPeriodFrameStopped)
1215	RTSemEventMultiDestroy(pRh->hSemEventPeriodFrameStopped);
1216
1217	RTCritSectDelete(&pRh->CritSectDevices);
1218	}
1219
1220
1221	/**
1222	* Construct a root hub driver instance.
1223	*
1224	* @copydoc FNPDMDRVCONSTRUCT
1225	*/
1226	static DECLCALLBACK(int) vusbRhConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags)
1227	{
1228	RT_NOREF(fFlags);
1229	PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns);
1230	LogFlow(("vusbRhConstruct: Instance %d\n", pDrvIns->iInstance));
1231	PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1232
1233	/*
1234	* Validate configuration.
1235	*/
1236	if (!CFGMR3AreValuesValid(pCfg, "CaptureFilename\0"))
1237	return VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES;
1238
1239	/*
1240	* Check that there are no drivers below us.
1241	*/
1242	AssertMsgReturn(PDMDrvHlpNoAttach(pDrvIns) == VERR_PDM_NO_ATTACHED_DRIVER,
1243	("Configuration error: Not possible to attach anything to this driver!\n"),
1244	VERR_PDM_DRVINS_NO_ATTACH);
1245
1246	/*
1247	* Initialize the critical sections.
1248	*/
1249	int rc = RTCritSectInit(&pThis->CritSectDevices);
1250	if (RT_FAILURE(rc))
1251	return rc;
1252
1253	char *pszCaptureFilename = NULL;
1254	rc = CFGMR3QueryStringAlloc(pCfg, "CaptureFilename", &pszCaptureFilename);
1255	if ( RT_FAILURE(rc)
1256	&& rc != VERR_CFGM_VALUE_NOT_FOUND)
1257	return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS,
1258	N_("Configuration error: Failed to query value of \"CaptureFilename\""));
1259
1260	/*
1261	* Initialize the data members.
1262	*/
1263	pDrvIns->IBase.pfnQueryInterface = vusbRhQueryInterface;
1264	/* the usb device */
1265	pThis->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED;
1266	pThis->Hub.Dev.u8Address = VUSB_INVALID_ADDRESS;
1267	pThis->Hub.Dev.u8NewAddress = VUSB_INVALID_ADDRESS;
1268	pThis->Hub.Dev.i16Port = -1;
1269	pThis->Hub.Dev.cRefs = 1;
1270	pThis->Hub.Dev.IDevice.pfnReset = vusbRhDevReset;
1271	pThis->Hub.Dev.IDevice.pfnPowerOn = vusbRhDevPowerOn;
1272	pThis->Hub.Dev.IDevice.pfnPowerOff = vusbRhDevPowerOff;
1273	pThis->Hub.Dev.IDevice.pfnGetState = vusbRhDevGetState;
1274	/* the hub */
1275	pThis->Hub.pOps = &s_VUsbRhHubOps;
1276	pThis->Hub.pRootHub = pThis;
1277	//pThis->hub.cPorts - later
1278	pThis->Hub.cDevices = 0;
1279	pThis->Hub.Dev.pHub = &pThis->Hub;
1280	RTStrAPrintf(&pThis->Hub.pszName, "RootHub#%d", pDrvIns->iInstance);
1281	/* misc */
1282	pThis->pDrvIns = pDrvIns;
1283	/* the connector */
1284	pThis->IRhConnector.pfnSetUrbParams = vusbRhSetUrbParams;
1285	pThis->IRhConnector.pfnNewUrb = vusbRhConnNewUrb;
1286	pThis->IRhConnector.pfnFreeUrb = vusbRhConnFreeUrb;
1287	pThis->IRhConnector.pfnSubmitUrb = vusbRhSubmitUrb;
1288	pThis->IRhConnector.pfnReapAsyncUrbs = vusbRhReapAsyncUrbs;
1289	pThis->IRhConnector.pfnCancelUrbsEp = vusbRhCancelUrbsEp;
1290	pThis->IRhConnector.pfnCancelAllUrbs = vusbRhCancelAllUrbs;
1291	pThis->IRhConnector.pfnAbortEp = vusbRhAbortEp;
1292	pThis->IRhConnector.pfnAttachDevice = vusbRhAttachDevice;
1293	pThis->IRhConnector.pfnDetachDevice = vusbRhDetachDevice;
1294	pThis->IRhConnector.pfnSetPeriodicFrameProcessing = vusbRhSetFrameProcessing;
1295	pThis->IRhConnector.pfnGetPeriodicFrameRate = vusbRhGetPriodicFrameRate;
1296	pThis->hSniffer = VUSBSNIFFER_NIL;
1297	pThis->cbHci = 0;
1298	pThis->cbHciTd = 0;
1299	pThis->fFrameProcessing = false;
1300	#ifdef LOG_ENABLED
1301	pThis->iSerial = 0;
1302	#endif
1303	/*
1304	* Resolve interface(s).
1305	*/
1306	pThis->pIRhPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, VUSBIROOTHUBPORT);
1307	AssertMsgReturn(pThis->pIRhPort, ("Configuration error: the device/driver above us doesn't expose any VUSBIROOTHUBPORT interface!\n"), VERR_PDM_MISSING_INTERFACE_ABOVE);
1308
1309	/*
1310	* Get number of ports and the availability bitmap.
1311	* ASSUME that the number of ports reported now at creation time is the max number.
1312	*/
1313	pThis->Hub.cPorts = pThis->pIRhPort->pfnGetAvailablePorts(pThis->pIRhPort, &pThis->Bitmap);
1314	Log(("vusbRhConstruct: cPorts=%d\n", pThis->Hub.cPorts));
1315
1316	/*
1317	* Get the USB version of the attached HC.
1318	* ASSUME that version 2.0 implies high-speed.
1319	*/
1320	pThis->fHcVersions = pThis->pIRhPort->pfnGetUSBVersions(pThis->pIRhPort);
1321	Log(("vusbRhConstruct: fHcVersions=%u\n", pThis->fHcVersions));
1322
1323	rc = vusbUrbPoolInit(&pThis->Hub.Dev.UrbPool);
1324	if (RT_FAILURE(rc))
1325	return rc;
1326
1327	if (pszCaptureFilename)
1328	{
1329	rc = VUSBSnifferCreate(&pThis->hSniffer, 0, pszCaptureFilename, NULL, NULL);
1330	if (RT_FAILURE(rc))
1331	return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS,
1332	N_("VUSBSniffer cannot open '%s' for writing. The directory must exist and it must be writable for the current user"),
1333	pszCaptureFilename);
1334
1335	MMR3HeapFree(pszCaptureFilename);
1336	}
1337
1338	/*
1339	* Register ourselves as a USB hub.
1340	* The current implementation uses the VUSBIRHCONFIG interface for communication.
1341	*/
1342	PCPDMUSBHUBHLP pHlp; /* not used currently */
1343	rc = PDMDrvHlpUSBRegisterHub(pDrvIns, pThis->fHcVersions, pThis->Hub.cPorts, &g_vusbHubReg, &pHlp);
1344	if (RT_FAILURE(rc))
1345	return rc;
1346
1347	/*
1348	* Statistics. (It requires a 30" monitor or extremely tiny fonts to edit this "table".)
1349	*/
1350	#ifdef VBOX_WITH_STATISTICS
1351	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs submitted.", "/VUSB/%d/UrbsSubmitted", pDrvIns->iInstance);
1352	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsSubmitted/Bulk", pDrvIns->iInstance);
1353	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsSubmitted/Ctrl", pDrvIns->iInstance);
1354	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsSubmitted/Intr", pDrvIns->iInstance);
1355	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsSubmitted/Isoc", pDrvIns->iInstance);
1356
1357	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs cancelled. (included in failed)", "/VUSB/%d/UrbsCancelled", pDrvIns->iInstance);
1358	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsCancelled/Bulk", pDrvIns->iInstance);
1359	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsCancelled/Ctrl", pDrvIns->iInstance);
1360	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsCancelled/Intr", pDrvIns->iInstance);
1361	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsCancelled/Isoc", pDrvIns->iInstance);
1362
1363	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs failing.", "/VUSB/%d/UrbsFailed", pDrvIns->iInstance);
1364	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsFailed/Bulk", pDrvIns->iInstance);
1365	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsFailed/Ctrl", pDrvIns->iInstance);
1366	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsFailed/Intr", pDrvIns->iInstance);
1367	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsFailed/Isoc", pDrvIns->iInstance);
1368
1369	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested transfer.", "/VUSB/%d/ReqBytes", pDrvIns->iInstance);
1370	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqBytes/Bulk", pDrvIns->iInstance);
1371	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqBytes/Ctrl", pDrvIns->iInstance);
1372	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqBytes/Intr", pDrvIns->iInstance);
1373	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqBytes/Isoc", pDrvIns->iInstance);
1374
1375	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested read transfer.", "/VUSB/%d/ReqReadBytes", pDrvIns->iInstance);
1376	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqReadBytes/Bulk", pDrvIns->iInstance);
1377	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqReadBytes/Ctrl", pDrvIns->iInstance);
1378	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqReadBytes/Intr", pDrvIns->iInstance);
1379	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqReadBytes/Isoc", pDrvIns->iInstance);
1380
1381	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested write transfer.", "/VUSB/%d/ReqWriteBytes", pDrvIns->iInstance);
1382	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqWriteBytes/Bulk", pDrvIns->iInstance);
1383	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqWriteBytes/Ctrl", pDrvIns->iInstance);
1384	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqWriteBytes/Intr", pDrvIns->iInstance);
1385	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqWriteBytes/Isoc", pDrvIns->iInstance);
1386
1387	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total transfer.", "/VUSB/%d/ActBytes", pDrvIns->iInstance);
1388	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActBytes/Bulk", pDrvIns->iInstance);
1389	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActBytes/Ctrl", pDrvIns->iInstance);
1390	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActBytes/Intr", pDrvIns->iInstance);
1391	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActBytes/Isoc", pDrvIns->iInstance);
1392
1393	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total read transfer.", "/VUSB/%d/ActReadBytes", pDrvIns->iInstance);
1394	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActReadBytes/Bulk", pDrvIns->iInstance);
1395	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActReadBytes/Ctrl", pDrvIns->iInstance);
1396	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActReadBytes/Intr", pDrvIns->iInstance);
1397	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActReadBytes/Isoc", pDrvIns->iInstance);
1398
1399	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total write transfer.", "/VUSB/%d/ActWriteBytes", pDrvIns->iInstance);
1400	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActWriteBytes/Bulk", pDrvIns->iInstance);
1401	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActWriteBytes/Ctrl", pDrvIns->iInstance);
1402	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActWriteBytes/Intr", pDrvIns->iInstance);
1403	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActWriteBytes/Isoc", pDrvIns->iInstance);
1404
1405	/* bulk */
1406	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Bulk/Urbs", pDrvIns->iInstance);
1407	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Bulk/UrbsFailed", pDrvIns->iInstance);
1408	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Bulk/UrbsFailed/Cancelled", pDrvIns->iInstance);
1409	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Bulk/ActBytes", pDrvIns->iInstance);
1410	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ActBytes/Read", pDrvIns->iInstance);
1411	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ActBytes/Write", pDrvIns->iInstance);
1412	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Bulk/ReqBytes", pDrvIns->iInstance);
1413	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ReqBytes/Read", pDrvIns->iInstance);
1414	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ReqBytes/Write", pDrvIns->iInstance);
1415
1416	/* control */
1417	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Ctrl/Urbs", pDrvIns->iInstance);
1418	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Ctrl/UrbsFailed", pDrvIns->iInstance);
1419	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Ctrl/UrbsFailed/Cancelled", pDrvIns->iInstance);
1420	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Ctrl/ActBytes", pDrvIns->iInstance);
1421	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ActBytes/Read", pDrvIns->iInstance);
1422	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ActBytes/Write", pDrvIns->iInstance);
1423	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Ctrl/ReqBytes", pDrvIns->iInstance);
1424	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ReqBytes/Read", pDrvIns->iInstance);
1425	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ReqBytes/Write", pDrvIns->iInstance);
1426
1427	/* interrupt */
1428	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Intr/Urbs", pDrvIns->iInstance);
1429	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Intr/UrbsFailed", pDrvIns->iInstance);
1430	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Intr/UrbsFailed/Cancelled", pDrvIns->iInstance);
1431	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Intr/ActBytes", pDrvIns->iInstance);
1432	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ActBytes/Read", pDrvIns->iInstance);
1433	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ActBytes/Write", pDrvIns->iInstance);
1434	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Intr/ReqBytes", pDrvIns->iInstance);
1435	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ReqBytes/Read", pDrvIns->iInstance);
1436	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ReqBytes/Write", pDrvIns->iInstance);
1437
1438	/* isochronous */
1439	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Isoc/Urbs", pDrvIns->iInstance);
1440	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Isoc/UrbsFailed", pDrvIns->iInstance);
1441	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Isoc/UrbsFailed/Cancelled", pDrvIns->iInstance);
1442	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Isoc/ActBytes", pDrvIns->iInstance);
1443	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ActBytes/Read", pDrvIns->iInstance);
1444	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ActBytes/Write", pDrvIns->iInstance);
1445	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Isoc/ReqBytes", pDrvIns->iInstance);
1446	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ReqBytes/Read", pDrvIns->iInstance);
1447	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ReqBytes/Write", pDrvIns->iInstance);
1448	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of isochronous packets returning data.", "/VUSB/%d/Isoc/ActPkts", pDrvIns->iInstance);
1449	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ActPkts/Read", pDrvIns->iInstance);
1450	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ActPkts/Write", pDrvIns->iInstance);
1451	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Requested number of isochronous packets.", "/VUSB/%d/Isoc/ReqPkts", pDrvIns->iInstance);
1452	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ReqPkts/Read", pDrvIns->iInstance);
1453	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ReqPkts/Write", pDrvIns->iInstance);
1454
1455	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aStatIsocDetails); i++)
1456	{
1457	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Pkts, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d", pDrvIns->iInstance, i);
1458	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok", pDrvIns->iInstance, i);
1459	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok0", pDrvIns->iInstance, i);
1460	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun", pDrvIns->iInstance, i);
1461	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun0", pDrvIns->iInstance, i);
1462	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataOverrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataOverrun", pDrvIns->iInstance, i);
1463	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].NotAccessed, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/NotAccessed", pDrvIns->iInstance, i);
1464	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Misc, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Misc", pDrvIns->iInstance, i);
1465	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Bytes, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_BYTES, ".", "/VUSB/%d/Isoc/%d/Bytes", pDrvIns->iInstance, i);
1466	}
1467
1468	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatReapAsyncUrbs, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhReapAsyncUrbs body (omitting calls when nothing is in-flight).", "/VUSB/%d/ReapAsyncUrbs", pDrvIns->iInstance);
1469	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatSubmitUrb, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhSubmitUrb body.", "/VUSB/%d/SubmitUrb", pDrvIns->iInstance);
1470	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedThread, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the dedicated thread", "/VUSB/%d/FramesProcessedThread", pDrvIns->iInstance);
1471	PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedClbk, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the URB completion callback", "/VUSB/%d/FramesProcessedClbk", pDrvIns->iInstance);
1472	#endif
1473	PDMDrvHlpSTAMRegisterF(pDrvIns, (void *)&pThis->Hub.Dev.UrbPool.cUrbsInPool, STAMTYPE_U32, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs in the pool.", "/VUSB/%d/cUrbsInPool", pDrvIns->iInstance);
1474
1475	return VINF_SUCCESS;
1476	}
1477
1478
1479	/**
1480	* VUSB Root Hub driver registration record.
1481	*/
1482	const PDMDRVREG g_DrvVUSBRootHub =
1483	{
1484	/* u32Version */
1485	PDM_DRVREG_VERSION,
1486	/* szName */
1487	"VUSBRootHub",
1488	/* szRCMod */
1489	"",
1490	/* szR0Mod */
1491	"",
1492	/* pszDescription */
1493	"VUSB Root Hub Driver.",
1494	/* fFlags */
1495	PDM_DRVREG_FLAGS_HOST_BITS_DEFAULT,
1496	/* fClass. */
1497	PDM_DRVREG_CLASS_USB,
1498	/* cMaxInstances */
1499	~0U,
1500	/* cbInstance */
1501	sizeof(VUSBROOTHUB),
1502	/* pfnConstruct */
1503	vusbRhConstruct,
1504	/* pfnDestruct */
1505	vusbRhDestruct,
1506	/* pfnRelocate */
1507	NULL,
1508	/* pfnIOCtl */
1509	NULL,
1510	/* pfnPowerOn */
1511	NULL,
1512	/* pfnReset */
1513	NULL,
1514	/* pfnSuspend */
1515	NULL,
1516	/* pfnResume */
1517	NULL,
1518	/* pfnAttach */
1519	NULL,
1520	/* pfnDetach */
1521	NULL,
1522	/* pfnPowerOff */
1523	NULL,
1524	/* pfnSoftReset */
1525	NULL,
1526	/* u32EndVersion */
1527	PDM_DRVREG_VERSION
1528	};
1529
1530	/*
1531	* Local Variables:
1532	* mode: c
1533	* c-file-style: "bsd"
1534	* c-basic-offset: 4
1535	* tab-width: 4
1536	* indent-tabs-mode: s
1537	* End:
1538	*/
1539

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/USB/DrvVUSBRootHub.cpp@ 65919

Download in other formats: