/** @file * Internal header file for VBox HDD Container. */ /* * Copyright (C) 2006-2008 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef __VBoxHDD_newInternal_h__ #include #include /** @name VBox HDD backend write flags * @{ */ /** Do not allocate a new block on this write. This is just an advisory * flag. The backend may still decide in some circumstances that it wants * to ignore this flag (which may cause extra dynamic image expansion). */ #define VD_WRITE_NO_ALLOC RT_BIT(1) /** @}*/ /** * Image format backend interface used by VBox HDD Container implementation. */ typedef struct VBOXHDDBACKEND { /** * The name of the backend (constant string). */ const char *pszBackendName; /** * The size of the structure. */ uint32_t cbSize; /** * The capabilities of the backend. */ uint64_t uBackendCaps; /** * Pointer to a NULL-terminated array of strings, containing the supported * file extensions. Note that some backends do not work on files, so this * pointer may just contain NULL. */ const char * const *papszFileExtensions; /** * Pointer to an array of structs describing each supported config key. * Terminated by a NULL config key. Note that some backends do not support * the configuration interface, so this pointer may just contain NULL. * Mandatory if the backend sets VD_CAP_CONFIG. */ PCVDCONFIGINFO paConfigInfo; /** * Check if a file is valid for the backend. * * @returns VBox status code. * @param pszFilename Name of the image file. */ DECLR3CALLBACKMEMBER(int, pfnCheckIfValid, (const char *pszFilename)); /** * Open a disk image. * * @returns VBox status code. * @param pszFilename Name of the image file to open. Guaranteed to be available and * unchanged during the lifetime of this image. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param pVDIfsDisk Pointer to the per-disk VD interface list. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param ppvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(int, pfnOpen, (const char *pszFilename, unsigned uOpenFlags, PVDINTERFACE pVDIfsDisk, PVDINTERFACE pVDIfsImage, void **ppvBackendData)); /** * Create a disk image. * * @returns VBox status code. * @param pszFilename Name of the image file to create. Guaranteed to be available and * unchanged during the lifetime of this image. * @param enmType Image type. Both base and diff image types are valid. * @param cbSize Image size in bytes. * @param uImageFlags Flags specifying special image features. * @param pszComment Pointer to image comment. NULL is ok. * @param pPCHSGeometry Physical drive geometry CHS <= (16383,16,255). * @param pLCHSGeometry Logical drive geometry CHS <= (1024,255,63). * @param pUuid New UUID of the image. Not NULL. * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants. * @param uPercentStart Starting value for progress percentage. * @param uPercentSpan Span for varying progress percentage. * @param pVDIfsDisk Pointer to the per-disk VD interface list. * @param pVDIfsImage Pointer to the per-image VD interface list. * @param pVDIfsOperation Pointer to the per-operation VD interface list. * @param ppvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(int, pfnCreate, (const char *pszFilename, VDIMAGETYPE enmType, uint64_t cbSize, unsigned uImageFlags, const char *pszComment, PCPDMMEDIAGEOMETRY pPCHSGeometry, PCPDMMEDIAGEOMETRY pLCHSGeometry, PCRTUUID pUuid, unsigned uOpenFlags, unsigned uPercentStart, unsigned uPercentSpan, PVDINTERFACE pVDIfsDisk, PVDINTERFACE pVDIfsImage, PVDINTERFACE pVDIfsOperation, void **ppvBackendData)); /** * Rename a disk image. Only needs to work as long as the operating * system's rename file functionality is usable. If an attempt is made to * rename an image to a location on another disk/filesystem, this function * may just fail with an appropriate error code (not changing the opened * image data at all). Also works only on images which actually refer to * files (and not for raw disk images). * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pszFilename New name of the image file. Guaranteed to be available and * unchanged during the lifetime of this image. */ DECLR3CALLBACKMEMBER(int, pfnRename, (void *pvBackendData, const char *pszFilename)); /** * Close a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param fDelete If true, delete the image from the host disk. */ DECLR3CALLBACKMEMBER(int, pfnClose, (void *pvBackendData, bool fDelete)); /** * Read data from a disk image. The area read never crosses a block * boundary. * * @returns VBox status code. * @returns VINF_VDI_BLOCK_FREE if this image contains no data for this block. * @returns VINF_VDI_BLOCK_ZERO if this image contains a zero data block. * @param pvBackendData Opaque state data for this image. * @param off Offset to start reading from. * @param pvBuf Where to store the read bits. * @param cbRead Number of bytes to read. * @param pcbActuallyRead Pointer to returned number of bytes read. */ DECLR3CALLBACKMEMBER(int, pfnRead, (void *pvBackendData, uint64_t off, void *pvBuf, size_t cbRead, size_t *pcbActuallyRead)); /** * Write data to a disk image. The area written never crosses a block * boundary. * * @returns VBox status code. * @returns VINF_VDI_BLOCK_FREE if this image contains no data for this block and * this is not a full-block write. The write must be repeated with * the correct amount of prefix/postfix data read from the images below * in the image stack. This might not be the most convenient interface, * but it works with arbitrary block sizes, especially when the image * stack uses different block sizes. * @param pvBackendData Opaque state data for this image. * @param off Offset to start writing to. * @param pvBuf Where to retrieve the written bits. * @param cbWrite Number of bytes to write. * @param pcbWriteProcess Pointer to returned number of bytes that could * be processed. In case the function returned * VINF_VDI_BLOCK_FREE this is the number of bytes * that could be written in a full block write, * when prefixed/postfixed by the appropriate * amount of (previously read) padding data. * @param pcbPreRead Pointer to the returned amount of data that must * be prefixed to perform a full block write. * @param pcbPostRead Pointer to the returned amount of data that must * be postfixed to perform a full block write. * @param fWrite Flags which affect write behavior. Combination * of the VD_WRITE_* flags. */ DECLR3CALLBACKMEMBER(int, pfnWrite, (void *pvBackendData, uint64_t off, const void *pvBuf, size_t cbWrite, size_t *pcbWriteProcess, size_t *pcbPreRead, size_t *pcbPostRead, unsigned fWrite)); /** * Flush data to disk. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(int, pfnFlush, (void *pvBackendData)); /** * Get the version of a disk image. * * @returns version of disk image. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(unsigned, pfnGetVersion, (void *pvBackendData)); /** * Get the type information for a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param penmType Image type of this image. */ DECLR3CALLBACKMEMBER(int, pfnGetImageType, (void *pvBackendData, PVDIMAGETYPE penmType)); /** * Get the capacity of a disk image. * * @returns size of disk image in bytes. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(uint64_t, pfnGetSize, (void *pvBackendData)); /** * Get the file size of a disk image. * * @returns size of disk image in bytes. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(uint64_t, pfnGetFileSize, (void *pvBackendData)); /** * Get virtual disk PCHS geometry stored in a disk image. * * @returns VBox status code. * @returns VERR_VDI_GEOMETRY_NOT_SET if no geometry present in the image. * @param pvBackendData Opaque state data for this image. * @param pPCHSGeometry Where to store the geometry. Not NULL. */ DECLR3CALLBACKMEMBER(int, pfnGetPCHSGeometry, (void *pvBackendData, PPDMMEDIAGEOMETRY pPCHSGeometry)); /** * Set virtual disk PCHS geometry stored in a disk image. * Only called if geometry is different than before. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pPCHSGeometry Where to load the geometry from. Not NULL. */ DECLR3CALLBACKMEMBER(int, pfnSetPCHSGeometry, (void *pvBackendData, PCPDMMEDIAGEOMETRY pPCHSGeometry)); /** * Get virtual disk LCHS geometry stored in a disk image. * * @returns VBox status code. * @returns VERR_VDI_GEOMETRY_NOT_SET if no geometry present in the image. * @param pvBackendData Opaque state data for this image. * @param pLCHSGeometry Where to store the geometry. Not NULL. */ DECLR3CALLBACKMEMBER(int, pfnGetLCHSGeometry, (void *pvBackendData, PPDMMEDIAGEOMETRY pLCHSGeometry)); /** * Set virtual disk LCHS geometry stored in a disk image. * Only called if geometry is different than before. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pLCHSGeometry Where to load the geometry from. Not NULL. */ DECLR3CALLBACKMEMBER(int, pfnSetLCHSGeometry, (void *pvBackendData, PCPDMMEDIAGEOMETRY pLCHSGeometry)); /** * Get the image flags of a disk image. * * @returns image flags of disk image. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(unsigned, pfnGetImageFlags, (void *pvBackendData)); /** * Get the open flags of a disk image. * * @returns open flags of disk image. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(unsigned, pfnGetOpenFlags, (void *pvBackendData)); /** * Set the open flags of a disk image. May cause the image to be locked * in a different mode or be reopened (which can fail). * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param uOpenFlags New open flags for this image. */ DECLR3CALLBACKMEMBER(int, pfnSetOpenFlags, (void *pvBackendData, unsigned uOpenFlags)); /** * Get comment of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pszComment Where to store the comment. * @param cbComment Size of the comment buffer. */ DECLR3CALLBACKMEMBER(int, pfnGetComment, (void *pvBackendData, char *pszComment, size_t cbComment)); /** * Set comment of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pszComment Where to get the comment from. NULL resets comment. * The comment is silently truncated if the image format * limit is exceeded. */ DECLR3CALLBACKMEMBER(int, pfnSetComment, (void *pvBackendData, const char *pszComment)); /** * Get UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to store the image UUID. */ DECLR3CALLBACKMEMBER(int, pfnGetUuid, (void *pvBackendData, PRTUUID pUuid)); /** * Set UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to get the image UUID from. */ DECLR3CALLBACKMEMBER(int, pfnSetUuid, (void *pvBackendData, PCRTUUID pUuid)); /** * Get last modification UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to store the image modification UUID. */ DECLR3CALLBACKMEMBER(int, pfnGetModificationUuid, (void *pvBackendData, PRTUUID pUuid)); /** * Set last modification UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to get the image modification UUID from. */ DECLR3CALLBACKMEMBER(int, pfnSetModificationUuid, (void *pvBackendData, PCRTUUID pUuid)); /** * Get parent UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to store the parent image UUID. */ DECLR3CALLBACKMEMBER(int, pfnGetParentUuid, (void *pvBackendData, PRTUUID pUuid)); /** * Set parent UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to get the parent image UUID from. */ DECLR3CALLBACKMEMBER(int, pfnSetParentUuid, (void *pvBackendData, PCRTUUID pUuid)); /** * Get parent modification UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to store the parent image modification UUID. */ DECLR3CALLBACKMEMBER(int, pfnGetParentModificationUuid, (void *pvBackendData, PRTUUID pUuid)); /** * Set parent modification UUID of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pUuid Where to get the parent image modification UUID from. */ DECLR3CALLBACKMEMBER(int, pfnSetParentModificationUuid, (void *pvBackendData, PCRTUUID pUuid)); /** * Dump information about a disk image. * * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(void, pfnDump, (void *pvBackendData)); /** * Get a time stamp of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pTimeStamp Where to store the time stamp. */ DECLR3CALLBACKMEMBER(int, pfnGetTimeStamp, (void *pvBackendData, PRTTIMESPEC pTimeStamp)); /** * Get the parent time stamp of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pTimeStamp Where to store the time stamp. */ DECLR3CALLBACKMEMBER(int, pfnGetParentTimeStamp, (void *pvBackendData, PRTTIMESPEC pTimeStamp)); /** * Set the parent time stamp of a disk image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pTimeStamp Where to get the time stamp from. */ DECLR3CALLBACKMEMBER(int, pfnSetParentTimeStamp, (void *pvBackendData, PCRTTIMESPEC pTimeStamp)); /** * Get the relative path to parent image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pszParentFilename Where to store the path. */ DECLR3CALLBACKMEMBER(int, pfnGetParentFilename, (void *pvBackendData, char **ppszParentFilename)); /** * Set the relative path to parent image. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param pszParentFilename Where to get the path from. */ DECLR3CALLBACKMEMBER(int, pfnSetParentFilename, (void *pvBackendData, const char *pszParentFilename)); /** * Return whether asynchronous I/O operations are supported for this image. * * @returns true if asynchronous I/O is supported * false otherwise. * @param pvBackendData Opaque state data for this image. */ DECLR3CALLBACKMEMBER(bool, pfnIsAsyncIOSupported, (void *pvBackendData)); /** * Start an asynchronous read request. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param uOffset The offset of the virtual disk to read from. * @param cbRead How many bytes to read. * @param paSeg Pointer to the segment array. * @param cSeg Number of segments. * @param pvUser Opaque user data. */ DECLR3CALLBACKMEMBER(int, pfnAsyncRead, (void *pvBackendData, uint64_t uOffset, size_t cbRead, PPDMDATASEG paSeg, unsigned cSeg, void *pvUser)); /** * Start an asynchronous write request. * * @returns VBox status code. * @param pvBackendData Opaque state data for this image. * @param uOffset The offset of the virtual disk to write to. * @param cbWrite How many bytes to write. * @param paSeg Pointer to the segment array. * @param cSeg Number of segments. * @param pvUser Oaque user data- */ DECLR3CALLBACKMEMBER(int, pfnAsyncWrite, (void *pvBackendData, uint64_t uOffset, size_t cbWrite, PPDMDATASEG paSeg, unsigned cSeg, void *pvUser)); } VBOXHDDBACKEND; /** Pointer to VD backend. */ typedef VBOXHDDBACKEND *PVBOXHDDBACKEND; /** Constant pointer to VD backend. */ typedef const VBOXHDDBACKEND *PCVBOXHDDBACKEND; /** Initialization entry point. */ typedef DECLCALLBACK(int) VBOXHDDFORMATLOAD(PVBOXHDDBACKEND *ppBackendTable); typedef VBOXHDDFORMATLOAD *PFNVBOXHDDFORMATLOAD; #define VBOX_HDDFORMAT_LOAD_NAME "VBoxHDDFormatLoad" /** The prefix to identify Storage Plugins. */ #define VBOX_HDDFORMAT_PLUGIN_PREFIX "VBoxHDD" /** The size of the prefix excluding the '\0' terminator. */ #define VBOX_HDDFORMAT_PLUGIN_PREFIX_LENGTH (sizeof(VBOX_HDDFORMAT_PLUGIN_PREFIX)-1) #endif