/* $Id: DevATA.cpp 82024 2019-11-20 13:46:13Z vboxsync $ */ /** @file * VBox storage devices: ATA/ATAPI controller device (disk and cdrom). */ /* * Copyright (C) 2006-2019 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DEV_IDE #include #include #include #include #ifdef IN_RING3 # include # include # include # include # include # include #endif /* IN_RING3 */ #include #include #include #include #include #include #include #include #include #include #include "ATAPIPassthrough.h" #include "VBoxDD.h" /********************************************************************************************************************************* * Defined Constants And Macros * *********************************************************************************************************************************/ /** Temporary instrumentation for tracking down potential virtual disk * write performance issues. */ #undef VBOX_INSTRUMENT_DMA_WRITES /** @name The SSM saved state versions. * @{ */ /** The current saved state version. */ #define ATA_SAVED_STATE_VERSION 20 /** The saved state version used by VirtualBox 3.0. * This lacks the config part and has the type at the and. */ #define ATA_SAVED_STATE_VERSION_VBOX_30 19 #define ATA_SAVED_STATE_VERSION_WITH_BOOL_TYPE 18 #define ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE 16 #define ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS 17 /** @} */ /** Values read from an empty (with no devices attached) ATA bus. */ #define ATA_EMPTY_BUS_DATA 0x7F #define ATA_EMPTY_BUS_DATA_32 0x7F7F7F7F /** * Maximum number of sectors to transfer in a READ/WRITE MULTIPLE request. * Set to 1 to disable multi-sector read support. According to the ATA * specification this must be a power of 2 and it must fit in an 8 bit * value. Thus the only valid values are 1, 2, 4, 8, 16, 32, 64 and 128. */ #define ATA_MAX_MULT_SECTORS 128 /** The maxium I/O buffer size (for sanity). */ #define ATA_MAX_SECTOR_SIZE _4K /** The maxium I/O buffer size (for sanity). */ #define ATA_MAX_IO_BUFFER_SIZE (ATA_MAX_MULT_SECTORS * ATA_MAX_SECTOR_SIZE) /** Mask to be applied to all indexing into ATACONTROLLER::aIfs. */ #define ATA_SELECTED_IF_MASK 1 /** * Fastest PIO mode supported by the drive. */ #define ATA_PIO_MODE_MAX 4 /** * Fastest MDMA mode supported by the drive. */ #define ATA_MDMA_MODE_MAX 2 /** * Fastest UDMA mode supported by the drive. */ #define ATA_UDMA_MODE_MAX 6 /** ATAPI sense info size. */ #define ATAPI_SENSE_SIZE 64 /** The maximum number of release log entries per device. */ #define MAX_LOG_REL_ERRORS 1024 /* MediaEventStatus */ #define ATA_EVENT_STATUS_UNCHANGED 0 /**< medium event status not changed */ #define ATA_EVENT_STATUS_MEDIA_NEW 1 /**< new medium inserted */ #define ATA_EVENT_STATUS_MEDIA_REMOVED 2 /**< medium removed */ #define ATA_EVENT_STATUS_MEDIA_CHANGED 3 /**< medium was removed + new medium was inserted */ #define ATA_EVENT_STATUS_MEDIA_EJECT_REQUESTED 4 /**< medium eject requested (eject button pressed) */ /* Media track type */ #define ATA_MEDIA_TYPE_UNKNOWN 0 /**< unknown CD type */ #define ATA_MEDIA_NO_DISC 0x70 /**< Door closed, no medium */ /** @defgroup grp_piix3atabmdma PIIX3 ATA Bus Master DMA * @{ */ /** @name BM_STATUS * @{ */ /** Currently performing a DMA operation. */ #define BM_STATUS_DMAING 0x01 /** An error occurred during the DMA operation. */ #define BM_STATUS_ERROR 0x02 /** The DMA unit has raised the IDE interrupt line. */ #define BM_STATUS_INT 0x04 /** User-defined bit 0, commonly used to signal that drive 0 supports DMA. */ #define BM_STATUS_D0DMA 0x20 /** User-defined bit 1, commonly used to signal that drive 1 supports DMA. */ #define BM_STATUS_D1DMA 0x40 /** @} */ /** @name BM_CMD * @{ */ /** Start the DMA operation. */ #define BM_CMD_START 0x01 /** Data transfer direction: from device to memory if set. */ #define BM_CMD_WRITE 0x08 /** @} */ /** Number of I/O ports per bus-master DMA controller. */ #define BM_DMA_CTL_IOPORTS 8 /** Mask corresponding to BM_DMA_CTL_IOPORTS. */ #define BM_DMA_CTL_IOPORTS_MASK 7 /** Shift count corresponding to BM_DMA_CTL_IOPORTS. */ #define BM_DMA_CTL_IOPORTS_SHIFT 3 /** @} */ #define ATADEVSTATE_2_DEVINS(pIf) ( (pIf)->CTX_SUFF(pDevIns) ) #define CONTROLLER_2_DEVINS(pController) ( (pController)->CTX_SUFF(pDevIns) ) /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** @defgroup grp_piix3atabmdma PIIX3 ATA Bus Master DMA * @{ */ /** PIIX3 Bus Master DMA unit state. */ typedef struct BMDMAState { /** Command register. */ uint8_t u8Cmd; /** Status register. */ uint8_t u8Status; /** Explicit alignment padding. */ uint8_t abAlignment[2]; /** Address of the MMIO region in the guest's memory space. */ RTGCPHYS32 GCPhysAddr; } BMDMAState; /** PIIX3 Bus Master DMA descriptor entry. */ typedef struct BMDMADesc { /** Address of the DMA source/target buffer. */ RTGCPHYS32 GCPhysBuffer; /** Size of the DMA source/target buffer. */ uint32_t cbBuffer; } BMDMADesc; /** @} */ /** * The shared state of an ATA device. */ typedef struct ATADEVSTATE { /** The I/O buffer. * @note Page aligned in case it helps. */ uint8_t abIOBuffer[ATA_MAX_IO_BUFFER_SIZE]; /** Flag indicating whether the current command uses LBA48 mode. */ bool fLBA48; /** Flag indicating whether this drive implements the ATAPI command set. */ bool fATAPI; /** Set if this interface has asserted the IRQ. */ bool fIrqPending; /** Currently configured number of sectors in a multi-sector transfer. */ uint8_t cMultSectors; /** PCHS disk geometry. */ PDMMEDIAGEOMETRY PCHSGeometry; /** Total number of sectors on this disk. */ uint64_t cTotalSectors; /** Sector size of the medium. */ uint32_t cbSector; /** Number of sectors to transfer per IRQ. */ uint32_t cSectorsPerIRQ; /** ATA/ATAPI register 1: feature (write-only). */ uint8_t uATARegFeature; /** ATA/ATAPI register 1: feature, high order byte. */ uint8_t uATARegFeatureHOB; /** ATA/ATAPI register 1: error (read-only). */ uint8_t uATARegError; /** ATA/ATAPI register 2: sector count (read/write). */ uint8_t uATARegNSector; /** ATA/ATAPI register 2: sector count, high order byte. */ uint8_t uATARegNSectorHOB; /** ATA/ATAPI register 3: sector (read/write). */ uint8_t uATARegSector; /** ATA/ATAPI register 3: sector, high order byte. */ uint8_t uATARegSectorHOB; /** ATA/ATAPI register 4: cylinder low (read/write). */ uint8_t uATARegLCyl; /** ATA/ATAPI register 4: cylinder low, high order byte. */ uint8_t uATARegLCylHOB; /** ATA/ATAPI register 5: cylinder high (read/write). */ uint8_t uATARegHCyl; /** ATA/ATAPI register 5: cylinder high, high order byte. */ uint8_t uATARegHCylHOB; /** ATA/ATAPI register 6: select drive/head (read/write). */ uint8_t uATARegSelect; /** ATA/ATAPI register 7: status (read-only). */ uint8_t uATARegStatus; /** ATA/ATAPI register 7: command (write-only). */ uint8_t uATARegCommand; /** ATA/ATAPI drive control register (write-only). */ uint8_t uATARegDevCtl; /** Currently active transfer mode (MDMA/UDMA) and speed. */ uint8_t uATATransferMode; /** Current transfer direction. */ uint8_t uTxDir; /** Index of callback for begin transfer. */ uint8_t iBeginTransfer; /** Index of callback for source/sink of data. */ uint8_t iSourceSink; /** Flag indicating whether the current command transfers data in DMA mode. */ bool fDMA; /** Set to indicate that ATAPI transfer semantics must be used. */ bool fATAPITransfer; /** Total ATA/ATAPI transfer size, shared PIO/DMA. */ uint32_t cbTotalTransfer; /** Elementary ATA/ATAPI transfer size, shared PIO/DMA. */ uint32_t cbElementaryTransfer; /** Maximum ATAPI elementary transfer size, PIO only. */ uint32_t cbPIOTransferLimit; /** ATAPI passthrough transfer size, shared PIO/DMA */ uint32_t cbAtapiPassthroughTransfer; /** Current read/write buffer position, shared PIO/DMA. */ uint32_t iIOBufferCur; /** First element beyond end of valid buffer content, shared PIO/DMA. */ uint32_t iIOBufferEnd; /** Align the following fields correctly. */ uint32_t Alignment0; /** ATA/ATAPI current PIO read/write transfer position. Not shared with DMA for safety reasons. */ uint32_t iIOBufferPIODataStart; /** ATA/ATAPI current PIO read/write transfer end. Not shared with DMA for safety reasons. */ uint32_t iIOBufferPIODataEnd; /** ATAPI current LBA position. */ uint32_t iATAPILBA; /** ATAPI current sector size. */ uint32_t cbATAPISector; /** ATAPI current command. */ uint8_t abATAPICmd[ATAPI_PACKET_SIZE]; /** ATAPI sense data. */ uint8_t abATAPISense[ATAPI_SENSE_SIZE]; /** HACK: Countdown till we report a newly unmounted drive as mounted. */ uint8_t cNotifiedMediaChange; /** The same for GET_EVENT_STATUS for mechanism */ volatile uint32_t MediaEventStatus; /** Media type if known. */ volatile uint32_t MediaTrackType; /** The status LED state for this drive. */ PDMLED Led; /** Size of I/O buffer. */ uint32_t cbIOBuffer; /* * No data that is part of the saved state after this point!!!!! */ /** Counter for number of busy status seen in R3 in a row. */ uint8_t cBusyStatusHackR3; /** Counter for number of busy status seen in GC/R0 in a row. */ uint8_t cBusyStatusHackRZ; /** Defines the R3 yield rate by a mask (power of 2 minus one). * Lower is more agressive. */ uint8_t cBusyStatusHackR3Rate; /** Defines the R0/RC yield rate by a mask (power of 2 minus one). * Lower is more agressive. */ uint8_t cBusyStatusHackRZRate; /** Release statistics: number of ATA DMA commands. */ STAMCOUNTER StatATADMA; /** Release statistics: number of ATA PIO commands. */ STAMCOUNTER StatATAPIO; /** Release statistics: number of ATAPI PIO commands. */ STAMCOUNTER StatATAPIDMA; /** Release statistics: number of ATAPI PIO commands. */ STAMCOUNTER StatATAPIPIO; #ifdef VBOX_INSTRUMENT_DMA_WRITES /** Release statistics: number of DMA sector writes and the time spent. */ STAMPROFILEADV StatInstrVDWrites; #endif /** Release statistics: Profiling RTThreadYield calls during status polling. */ STAMPROFILEADV StatStatusYields; /** Statistics: number of read operations and the time spent reading. */ STAMPROFILEADV StatReads; /** Statistics: number of bytes read. */ STAMCOUNTER StatBytesRead; /** Statistics: number of write operations and the time spent writing. */ STAMPROFILEADV StatWrites; /** Statistics: number of bytes written. */ STAMCOUNTER StatBytesWritten; /** Statistics: number of flush operations and the time spend flushing. */ STAMPROFILE StatFlushes; /** Enable passing through commands directly to the ATAPI drive. */ bool fATAPIPassthrough; /** Flag whether to overwrite inquiry data in passthrough mode. */ bool fOverwriteInquiry; /** Number of errors we've reported to the release log. * This is to prevent flooding caused by something going horribly wrong. * this value against MAX_LOG_REL_ERRORS in places likely to cause floods * like the ones we currently seeing on the linux smoke tests (2006-11-10). */ uint32_t cErrors; /** Timestamp of last started command. 0 if no command pending. */ uint64_t u64CmdTS; /** The LUN number. */ uint32_t iLUN; /** The controller number. */ uint8_t iCtl; /** The device number. */ uint8_t iDev; /** Set if the device is present. */ bool fPresent; /** Explicit alignment. */ uint8_t bAlignment2; /** The serial number to use for IDENTIFY DEVICE commands. */ char szSerialNumber[ATA_SERIAL_NUMBER_LENGTH+1]; /** The firmware revision to use for IDENTIFY DEVICE commands. */ char szFirmwareRevision[ATA_FIRMWARE_REVISION_LENGTH+1]; /** The model number to use for IDENTIFY DEVICE commands. */ char szModelNumber[ATA_MODEL_NUMBER_LENGTH+1]; /** The vendor identification string for SCSI INQUIRY commands. */ char szInquiryVendorId[SCSI_INQUIRY_VENDOR_ID_LENGTH+1]; /** The product identification string for SCSI INQUIRY commands. */ char szInquiryProductId[SCSI_INQUIRY_PRODUCT_ID_LENGTH+1]; /** The revision string for SCSI INQUIRY commands. */ char szInquiryRevision[SCSI_INQUIRY_REVISION_LENGTH+1]; /** Padding the structure to a multiple of 4096 for better I/O buffer alignment. */ uint8_t abAlignment4[7 + 3544]; } ATADEVSTATE; AssertCompileMemberAlignment(ATADEVSTATE, cTotalSectors, 8); AssertCompileMemberAlignment(ATADEVSTATE, StatATADMA, 8); AssertCompileMemberAlignment(ATADEVSTATE, u64CmdTS, 8); AssertCompileMemberAlignment(ATADEVSTATE, szSerialNumber, 8); AssertCompileSizeAlignment(ATADEVSTATE, 4096); /* To align the buffer on a page boundrary. */ /** Pointer to the shared state of an ATA device. */ typedef ATADEVSTATE *PATADEVSTATE; /** * The ring-3 state of an ATA device. * * @implements PDMIBASE * @implements PDMIBLOCKPORT * @implements PDMIMOUNTNOTIFY */ typedef struct ATADEVSTATER3 { /** Pointer to the attached driver's base interface. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached driver's block interface. */ R3PTRTYPE(PPDMIMEDIA) pDrvMedia; /** Pointer to the attached driver's mount interface. * This is NULL if the driver isn't a removable unit. */ R3PTRTYPE(PPDMIMOUNT) pDrvMount; /** The base interface. */ PDMIBASE IBase; /** The block port interface. */ PDMIMEDIAPORT IPort; /** The mount notify interface. */ PDMIMOUNTNOTIFY IMountNotify; /** The LUN number. */ uint32_t iLUN; /** The controller number. */ uint8_t iCtl; /** The device number. */ uint8_t iDev; /** Explicit alignment. */ uint8_t abAlignment2[2]; /** The device instance so we can get our bearings from an interface method. */ PPDMDEVINSR3 pDevIns; /** The current tracklist of the loaded medium if passthrough is used. */ R3PTRTYPE(PTRACKLIST) pTrackList; } ATADEVSTATER3; /** Pointer to the ring-3 state of an ATA device. */ typedef ATADEVSTATER3 *PATADEVSTATER3; /** * Transfer request forwarded to the async I/O thread. */ typedef struct ATATransferRequest { /** The interface index the request is for. */ uint8_t iIf; /** The index of the begin transfer callback to call. */ uint8_t iBeginTransfer; /** The index of the source sink callback to call for doing the transfer. */ uint8_t iSourceSink; /** Transfer direction. */ uint8_t uTxDir; /** How many bytes to transfer. */ uint32_t cbTotalTransfer; } ATATransferRequest; /** * Abort request forwarded to the async I/O thread. */ typedef struct ATAAbortRequest { /** The interface index the request is for. */ uint8_t iIf; /** Flag whether to reset the drive. */ bool fResetDrive; } ATAAbortRequest; /** * Request type indicator. */ typedef enum { /** Begin a new transfer. */ ATA_AIO_NEW = 0, /** Continue a DMA transfer. */ ATA_AIO_DMA, /** Continue a PIO transfer. */ ATA_AIO_PIO, /** Reset the drives on current controller, stop all transfer activity. */ ATA_AIO_RESET_ASSERTED, /** Reset the drives on current controller, resume operation. */ ATA_AIO_RESET_CLEARED, /** Abort the current transfer of a particular drive. */ ATA_AIO_ABORT } ATAAIO; /** * Combining structure for an ATA request to the async I/O thread * started with the request type insicator. */ typedef struct ATARequest { /** Request type. */ ATAAIO ReqType; /** Request type dependent data. */ union { /** Transfer request specific data. */ ATATransferRequest t; /** Abort request specific data. */ ATAAbortRequest a; } u; } ATARequest; /** * The shared state of an ATA controller. * * Has two devices, the master (0) and the slave (1). */ typedef struct ATACONTROLLER { /** The ATA/ATAPI interfaces of this controller. */ ATADEVSTATE aIfs[2]; /** The base of the first I/O Port range. */ RTIOPORT IOPortBase1; /** The base of the second I/O Port range. (0 if none) */ RTIOPORT IOPortBase2; /** The assigned IRQ. */ uint32_t irq; /** Access critical section */ PDMCRITSECT lock; /** Selected drive. */ uint8_t iSelectedIf; /** The interface on which to handle async I/O. */ uint8_t iAIOIf; /** The state of the async I/O thread. */ uint8_t uAsyncIOState; /** Flag indicating whether the next transfer is part of the current command. */ bool fChainedTransfer; /** Set when the reset processing is currently active on this controller. */ bool fReset; /** Flag whether the current transfer needs to be redone. */ bool fRedo; /** Flag whether the redo suspend has been finished. */ bool fRedoIdle; /** Flag whether the DMA operation to be redone is the final transfer. */ bool fRedoDMALastDesc; /** The BusMaster DMA state. */ BMDMAState BmDma; /** Pointer to first DMA descriptor. */ RTGCPHYS32 GCPhysFirstDMADesc; /** Pointer to last DMA descriptor. */ RTGCPHYS32 GCPhysLastDMADesc; /** Pointer to current DMA buffer (for redo operations). */ RTGCPHYS32 GCPhysRedoDMABuffer; /** Size of current DMA buffer (for redo operations). */ uint32_t cbRedoDMABuffer; /** The event semaphore the thread is waiting on for requests. */ SUPSEMEVENT hAsyncIOSem; /** The request queue for the AIO thread. One element is always unused. */ ATARequest aAsyncIORequests[4]; /** The position at which to insert a new request for the AIO thread. */ volatile uint8_t AsyncIOReqHead; /** The position at which to get a new request for the AIO thread. */ volatile uint8_t AsyncIOReqTail; /** The controller number. */ uint8_t iCtl; /** Magic delay before triggering interrupts in DMA mode. */ uint32_t msDelayIRQ; /** The lock protecting the request queue. */ PDMCRITSECT AsyncIORequestLock; /** Timestamp we started the reset. */ uint64_t u64ResetTime; /** The first port in the first I/O port range, regular operation. */ IOMIOPORTHANDLE hIoPorts1First; /** The other ports in the first I/O port range, regular operation. */ IOMIOPORTHANDLE hIoPorts1Other; /** The second I/O port range, regular operation. */ IOMIOPORTHANDLE hIoPorts2; /** The first I/O port range, empty controller operation. */ IOMIOPORTHANDLE hIoPortsEmpty1; /** The second I/O port range, empty controller operation. */ IOMIOPORTHANDLE hIoPortsEmpty2; /* Statistics */ STAMCOUNTER StatAsyncOps; uint64_t StatAsyncMinWait; uint64_t StatAsyncMaxWait; STAMCOUNTER StatAsyncTimeUS; STAMPROFILEADV StatAsyncTime; STAMPROFILE StatLockWait; uint8_t abAlignment4[3456]; } ATACONTROLLER; AssertCompileMemberAlignment(ATACONTROLLER, lock, 8); AssertCompileMemberAlignment(ATACONTROLLER, aIfs, 8); AssertCompileMemberAlignment(ATACONTROLLER, u64ResetTime, 8); AssertCompileMemberAlignment(ATACONTROLLER, StatAsyncOps, 8); AssertCompileMemberAlignment(ATACONTROLLER, AsyncIORequestLock, 8); AssertCompileSizeAlignment(ATACONTROLLER, 4096); /* To align the controllers, devices and I/O buffers on page boundaries. */ /** Pointer to the shared state of an ATA controller. */ typedef ATACONTROLLER *PATACONTROLLER; /** * The ring-3 state of an ATA controller. */ typedef struct ATACONTROLLERR3 { /** The ATA/ATAPI interfaces of this controller. */ ATADEVSTATER3 aIfs[2]; /** Pointer to device instance. */ PPDMDEVINSR3 pDevIns; /** The async I/O thread handle. NIL_RTTHREAD if no thread. */ RTTHREAD hAsyncIOThread; /** The event semaphore the thread is waiting on during suspended I/O. */ RTSEMEVENT hSuspendIOSem; /** Set when the destroying the device instance and the thread must exit. */ uint32_t volatile fShutdown; /** Whether to call PDMDevHlpAsyncNotificationCompleted when idle. */ bool volatile fSignalIdle; /** The controller number. */ uint8_t iCtl; uint8_t abAlignment[3]; } ATACONTROLLERR3; /** Pointer to the ring-3 state of an ATA controller. */ typedef ATACONTROLLERR3 *PATACONTROLLERR3; /** ATA chipset type. */ typedef enum CHIPSET { /** PIIX3 chipset, must be 0 for saved state compatibility */ CHIPSET_PIIX3 = 0, /** PIIX4 chipset, must be 1 for saved state compatibility */ CHIPSET_PIIX4, /** ICH6 chipset */ CHIPSET_ICH6, CHIPSET_32BIT_HACK=0x7fffffff } CHIPSET; AssertCompileSize(CHIPSET, 4); /** * The shared state of a ATA PCI device. */ typedef struct ATASTATE { /** The controllers. */ ATACONTROLLER aCts[2]; /** Flag indicating chipset being emulated. */ CHIPSET enmChipset; /** Explicit alignment padding. */ uint8_t abAlignment1[7]; /** PCI region \#4: Bus-master DMA I/O ports. */ IOMIOPORTHANDLE hIoPortsBmDma; } ATASTATE; /** Pointer to the shared state of an ATA PCI device. */ typedef ATASTATE *PATASTATE; /** * The ring-3 state of a ATA PCI device. * * @implements PDMILEDPORTS */ typedef struct ATASTATER3 { /** The controllers. */ ATACONTROLLERR3 aCts[2]; /** Status LUN: Base interface. */ PDMIBASE IBase; /** Status LUN: Leds interface. */ PDMILEDPORTS ILeds; /** Status LUN: Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; /** Status LUN: Media Notify. */ R3PTRTYPE(PPDMIMEDIANOTIFY) pMediaNotify; /** Pointer to device instance (for getting our bearings in interface methods). */ PPDMDEVINSR3 pDevIns; } ATASTATER3; /** Pointer to the ring-3 state of an ATA PCI device. */ typedef ATASTATER3 *PATASTATER3; /** * The ring-0 state of the ATA PCI device. */ typedef struct ATASTATER0 { uint64_t uUnused; } ATASTATER0; /** Pointer to the ring-0 state of an ATA PCI device. */ typedef ATASTATER0 *PATASTATER0; /** * The raw-mode state of the ATA PCI device. */ typedef struct ATASTATERC { uint64_t uUnused; } ATASTATERC; /** Pointer to the raw-mode state of an ATA PCI device. */ typedef ATASTATERC *PATASTATERC; /** The current context state of an ATA PCI device. */ typedef CTX_SUFF(ATASTATE) ATASTATECC; /** Pointer to the current context state of an ATA PCI device. */ typedef CTX_SUFF(PATASTATE) PATASTATECC; #ifndef VBOX_DEVICE_STRUCT_TESTCASE #ifdef IN_RING3 DECLINLINE(void) ataSetStatusValue(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t stat) { /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus = stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } #endif /* IN_RING3 */ DECLINLINE(void) ataSetStatus(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t stat) { /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus |= stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } DECLINLINE(void) ataUnsetStatus(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t stat) { /* Freeze status register contents while processing RESET. */ if (!pCtl->fReset) { s->uATARegStatus &= ~stat; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, s->iLUN, s->uATARegStatus)); } } #if defined(IN_RING3) || defined(IN_RING0) # ifdef IN_RING3 typedef void FNBEGINTRANSFER(PATACONTROLLER pCtl, PATADEVSTATE s); typedef FNBEGINTRANSFER *PFNBEGINTRANSFER; typedef bool FNSOURCESINK(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3); typedef FNSOURCESINK *PFNSOURCESINK; static FNBEGINTRANSFER ataR3ReadWriteSectorsBT; static FNBEGINTRANSFER ataR3PacketBT; static FNBEGINTRANSFER atapiR3CmdBT; static FNBEGINTRANSFER atapiR3PassthroughCmdBT; static FNSOURCESINK ataR3IdentifySS; static FNSOURCESINK ataR3FlushSS; static FNSOURCESINK ataR3ReadSectorsSS; static FNSOURCESINK ataR3WriteSectorsSS; static FNSOURCESINK ataR3ExecuteDeviceDiagnosticSS; static FNSOURCESINK ataR3TrimSS; static FNSOURCESINK ataR3PacketSS; static FNSOURCESINK ataR3InitDevParmSS; static FNSOURCESINK ataR3RecalibrateSS; static FNSOURCESINK atapiR3GetConfigurationSS; static FNSOURCESINK atapiR3GetEventStatusNotificationSS; static FNSOURCESINK atapiR3IdentifySS; static FNSOURCESINK atapiR3InquirySS; static FNSOURCESINK atapiR3MechanismStatusSS; static FNSOURCESINK atapiR3ModeSenseErrorRecoverySS; static FNSOURCESINK atapiR3ModeSenseCDStatusSS; static FNSOURCESINK atapiR3ReadSS; static FNSOURCESINK atapiR3ReadCapacitySS; static FNSOURCESINK atapiR3ReadDiscInformationSS; static FNSOURCESINK atapiR3ReadTOCNormalSS; static FNSOURCESINK atapiR3ReadTOCMultiSS; static FNSOURCESINK atapiR3ReadTOCRawSS; static FNSOURCESINK atapiR3ReadTrackInformationSS; static FNSOURCESINK atapiR3RequestSenseSS; static FNSOURCESINK atapiR3PassthroughSS; static FNSOURCESINK atapiR3ReadDVDStructureSS; # endif /* IN_RING3 */ /** * Begin of transfer function indexes for g_apfnBeginTransFuncs. */ typedef enum ATAFNBT { ATAFN_BT_NULL = 0, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_BT_PACKET, ATAFN_BT_ATAPI_CMD, ATAFN_BT_ATAPI_PASSTHROUGH_CMD, ATAFN_BT_MAX } ATAFNBT; # ifdef IN_RING3 /** * Array of end transfer functions, the index is ATAFNET. * Make sure ATAFNET and this array match! */ static const PFNBEGINTRANSFER g_apfnBeginTransFuncs[ATAFN_BT_MAX] = { NULL, ataR3ReadWriteSectorsBT, ataR3PacketBT, atapiR3CmdBT, atapiR3PassthroughCmdBT, }; # endif /* IN_RING3 */ /** * Source/sink function indexes for g_apfnSourceSinkFuncs. */ typedef enum ATAFNSS { ATAFN_SS_NULL = 0, ATAFN_SS_IDENTIFY, ATAFN_SS_FLUSH, ATAFN_SS_READ_SECTORS, ATAFN_SS_WRITE_SECTORS, ATAFN_SS_EXECUTE_DEVICE_DIAGNOSTIC, ATAFN_SS_TRIM, ATAFN_SS_PACKET, ATAFN_SS_INITIALIZE_DEVICE_PARAMETERS, ATAFN_SS_RECALIBRATE, ATAFN_SS_ATAPI_GET_CONFIGURATION, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, ATAFN_SS_ATAPI_IDENTIFY, ATAFN_SS_ATAPI_INQUIRY, ATAFN_SS_ATAPI_MECHANISM_STATUS, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, ATAFN_SS_ATAPI_READ, ATAFN_SS_ATAPI_READ_CAPACITY, ATAFN_SS_ATAPI_READ_DISC_INFORMATION, ATAFN_SS_ATAPI_READ_TOC_NORMAL, ATAFN_SS_ATAPI_READ_TOC_MULTI, ATAFN_SS_ATAPI_READ_TOC_RAW, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION, ATAFN_SS_ATAPI_REQUEST_SENSE, ATAFN_SS_ATAPI_PASSTHROUGH, ATAFN_SS_ATAPI_READ_DVD_STRUCTURE, ATAFN_SS_MAX } ATAFNSS; # ifdef IN_RING3 /** * Array of source/sink functions, the index is ATAFNSS. * Make sure ATAFNSS and this array match! */ static const PFNSOURCESINK g_apfnSourceSinkFuncs[ATAFN_SS_MAX] = { NULL, ataR3IdentifySS, ataR3FlushSS, ataR3ReadSectorsSS, ataR3WriteSectorsSS, ataR3ExecuteDeviceDiagnosticSS, ataR3TrimSS, ataR3PacketSS, ataR3InitDevParmSS, ataR3RecalibrateSS, atapiR3GetConfigurationSS, atapiR3GetEventStatusNotificationSS, atapiR3IdentifySS, atapiR3InquirySS, atapiR3MechanismStatusSS, atapiR3ModeSenseErrorRecoverySS, atapiR3ModeSenseCDStatusSS, atapiR3ReadSS, atapiR3ReadCapacitySS, atapiR3ReadDiscInformationSS, atapiR3ReadTOCNormalSS, atapiR3ReadTOCMultiSS, atapiR3ReadTOCRawSS, atapiR3ReadTrackInformationSS, atapiR3RequestSenseSS, atapiR3PassthroughSS, atapiR3ReadDVDStructureSS }; # endif /* IN_RING3 */ static const ATARequest g_ataDMARequest = { ATA_AIO_DMA, { { 0, 0, 0, 0, 0 } } }; static const ATARequest g_ataPIORequest = { ATA_AIO_PIO, { { 0, 0, 0, 0, 0 } } }; # ifdef IN_RING3 static const ATARequest g_ataResetARequest = { ATA_AIO_RESET_ASSERTED, { { 0, 0, 0, 0, 0 } } }; static const ATARequest g_ataResetCRequest = { ATA_AIO_RESET_CLEARED, { { 0, 0, 0, 0, 0 } } }; # endif # ifdef IN_RING3 static void ataR3AsyncIOClearRequests(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); pCtl->AsyncIOReqHead = 0; pCtl->AsyncIOReqTail = 0; rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); } # endif /* IN_RING3 */ static void ataHCAsyncIOPutRequest(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, const ATARequest *pReq) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); uint8_t const iAsyncIORequest = pCtl->AsyncIOReqHead % RT_ELEMENTS(pCtl->aAsyncIORequests); Assert((iAsyncIORequest + 1) % RT_ELEMENTS(pCtl->aAsyncIORequests) != pCtl->AsyncIOReqTail); memcpy(&pCtl->aAsyncIORequests[iAsyncIORequest], pReq, sizeof(*pReq)); pCtl->AsyncIOReqHead = (iAsyncIORequest + 1) % RT_ELEMENTS(pCtl->aAsyncIORequests); rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); rc = PDMDevHlpCritSectScheduleExitEvent(pDevIns, &pCtl->lock, pCtl->hAsyncIOSem); if (RT_FAILURE(rc)) { rc = PDMDevHlpSUPSemEventSignal(pDevIns, pCtl->hAsyncIOSem); AssertRC(rc); } } # ifdef IN_RING3 static const ATARequest *ataR3AsyncIOGetCurrentRequest(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { const ATARequest *pReq; int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); if (pCtl->AsyncIOReqHead != pCtl->AsyncIOReqTail) pReq = &pCtl->aAsyncIORequests[pCtl->AsyncIOReqTail]; else pReq = NULL; rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); return pReq; } /** * Remove the request with the given type, as it's finished. The request * is not removed blindly, as this could mean a RESET request that is not * yet processed (but has cleared the request queue) is lost. * * @param pDevIns The device instance. * @param pCtl Controller for which to remove the request. * @param ReqType Type of the request to remove. */ static void ataR3AsyncIORemoveCurrentRequest(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, ATAAIO ReqType) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); if (pCtl->AsyncIOReqHead != pCtl->AsyncIOReqTail && pCtl->aAsyncIORequests[pCtl->AsyncIOReqTail].ReqType == ReqType) { pCtl->AsyncIOReqTail++; pCtl->AsyncIOReqTail %= RT_ELEMENTS(pCtl->aAsyncIORequests); } rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); } /** * Dump the request queue for a particular controller. First dump the queue * contents, then the already processed entries, as long as they haven't been * overwritten. * * @param pDevIns The device instance. * @param pCtl Controller for which to dump the queue. */ static void ataR3AsyncIODumpRequests(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); LogRel(("PIIX3 ATA: Ctl#%d: request queue dump (topmost is current):\n", pCtl->iCtl)); uint8_t curr = pCtl->AsyncIOReqTail; do { if (curr == pCtl->AsyncIOReqHead) LogRel(("PIIX3 ATA: Ctl#%d: processed requests (topmost is oldest):\n", pCtl->iCtl)); switch (pCtl->aAsyncIORequests[curr].ReqType) { case ATA_AIO_NEW: LogRel(("new transfer request, iIf=%d iBeginTransfer=%d iSourceSink=%d cbTotalTransfer=%d uTxDir=%d\n", pCtl->aAsyncIORequests[curr].u.t.iIf, pCtl->aAsyncIORequests[curr].u.t.iBeginTransfer, pCtl->aAsyncIORequests[curr].u.t.iSourceSink, pCtl->aAsyncIORequests[curr].u.t.cbTotalTransfer, pCtl->aAsyncIORequests[curr].u.t.uTxDir)); break; case ATA_AIO_DMA: LogRel(("dma transfer continuation\n")); break; case ATA_AIO_PIO: LogRel(("pio transfer continuation\n")); break; case ATA_AIO_RESET_ASSERTED: LogRel(("reset asserted request\n")); break; case ATA_AIO_RESET_CLEARED: LogRel(("reset cleared request\n")); break; case ATA_AIO_ABORT: LogRel(("abort request, iIf=%d fResetDrive=%d\n", pCtl->aAsyncIORequests[curr].u.a.iIf, pCtl->aAsyncIORequests[curr].u.a.fResetDrive)); break; default: LogRel(("unknown request %d\n", pCtl->aAsyncIORequests[curr].ReqType)); } curr = (curr + 1) % RT_ELEMENTS(pCtl->aAsyncIORequests); } while (curr != pCtl->AsyncIOReqTail); rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); } /** * Checks whether the request queue for a particular controller is empty * or whether a particular controller is idle. * * @param pDevIns The device instance. * @param pCtl Controller for which to check the queue. * @param fStrict If set then the controller is checked to be idle. */ static bool ataR3AsyncIOIsIdle(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, bool fStrict) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); bool fIdle = pCtl->fRedoIdle; if (!fIdle) fIdle = (pCtl->AsyncIOReqHead == pCtl->AsyncIOReqTail); if (fStrict) fIdle &= (pCtl->uAsyncIOState == ATA_AIO_NEW); rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); return fIdle; } /** * Send a transfer request to the async I/O thread. * * @param pDevIns The device instance. * @param pCtl The ATA controller. * @param s Pointer to the ATA device state data. * @param cbTotalTransfer Data transfer size. * @param uTxDir Data transfer direction. * @param iBeginTransfer Index of BeginTransfer callback. * @param iSourceSink Index of SourceSink callback. * @param fChainedTransfer Whether this is a transfer that is part of the previous command/transfer. */ static void ataR3StartTransfer(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, uint32_t cbTotalTransfer, uint8_t uTxDir, ATAFNBT iBeginTransfer, ATAFNSS iSourceSink, bool fChainedTransfer) { ATARequest Req; Assert(PDMDevHlpCritSectIsOwner(pDevIns, &pCtl->lock)); /* Do not issue new requests while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed new request as RESET is active\n", __FUNCTION__, pCtl->iCtl)); return; } /* If the controller is already doing something else right now, ignore * the command that is being submitted. Some broken guests issue commands * twice (e.g. the Linux kernel that comes with Acronis True Image 8). */ if (!fChainedTransfer && !ataR3AsyncIOIsIdle(pDevIns, pCtl, true /*fStrict*/)) { Log(("%s: Ctl#%d: ignored command %#04x, controller state %d\n", __FUNCTION__, pCtl->iCtl, s->uATARegCommand, pCtl->uAsyncIOState)); LogRel(("PIIX3 IDE: guest issued command %#04x while controller busy\n", s->uATARegCommand)); return; } Req.ReqType = ATA_AIO_NEW; if (fChainedTransfer) Req.u.t.iIf = pCtl->iAIOIf; else Req.u.t.iIf = pCtl->iSelectedIf; Req.u.t.cbTotalTransfer = cbTotalTransfer; Req.u.t.uTxDir = uTxDir; Req.u.t.iBeginTransfer = iBeginTransfer; Req.u.t.iSourceSink = iSourceSink; ataSetStatusValue(pCtl, s, ATA_STAT_BUSY); pCtl->fChainedTransfer = fChainedTransfer; /* * Kick the worker thread into action. */ Log2(("%s: Ctl#%d: message to async I/O thread, new request\n", __FUNCTION__, pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &Req); } /** * Send an abort command request to the async I/O thread. * * @param pDevIns The device instance. * @param pCtl The ATA controller. * @param s Pointer to the ATA device state data. * @param fResetDrive Whether to reset the drive or just abort a command. */ static void ataR3AbortCurrentCommand(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, bool fResetDrive) { ATARequest Req; Assert(PDMDevHlpCritSectIsOwner(pDevIns, &pCtl->lock)); /* Do not issue new requests while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed aborting command as RESET is active\n", __FUNCTION__, pCtl->iCtl)); return; } Req.ReqType = ATA_AIO_ABORT; Req.u.a.iIf = pCtl->iSelectedIf; Req.u.a.fResetDrive = fResetDrive; ataSetStatus(pCtl, s, ATA_STAT_BUSY); Log2(("%s: Ctl#%d: message to async I/O thread, abort command on LUN#%d\n", __FUNCTION__, pCtl->iCtl, s->iLUN)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &Req); } # endif /* IN_RING3 */ /** * Set the internal interrupt pending status, update INTREQ as appropriate. * * @param pDevIns The device instance. * @param pCtl The ATA controller. * @param s Pointer to the ATA device state data. */ static void ataHCSetIRQ(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s) { if (!s->fIrqPending) { if (!(s->uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d asserting IRQ\n", __FUNCTION__, s->iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if the interrupt * line is asserted. It monitors the line for a rising edge. */ pCtl->BmDma.u8Status |= BM_STATUS_INT; /* Only actually set the IRQ line if updating the currently selected drive. */ if (s == &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]) { /** @todo experiment with adaptive IRQ delivery: for reads it is * better to wait for IRQ delivery, as it reduces latency. */ if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 1); } } s->fIrqPending = true; } } #endif /* IN_RING0 || IN_RING3 */ /** * Clear the internal interrupt pending status, update INTREQ as appropriate. * * @param pDevIns The device instance. * @param pCtl The ATA controller. * @param s Pointer to the ATA device state data. */ static void ataUnsetIRQ(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s) { if (s->fIrqPending) { if (!(s->uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d deasserting IRQ\n", __FUNCTION__, s->iLUN)); /* Only actually unset the IRQ line if updating the currently selected drive. */ if (s == &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]) { if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 0); } } s->fIrqPending = false; } } #if defined(IN_RING0) || defined(IN_RING3) static void ataHCPIOTransferStart(PATACONTROLLER pCtl, PATADEVSTATE s, uint32_t start, uint32_t size) { Log2(("%s: LUN#%d start %d size %d\n", __FUNCTION__, s->iLUN, start, size)); s->iIOBufferPIODataStart = start; s->iIOBufferPIODataEnd = start + size; ataSetStatus(pCtl, s, ATA_STAT_DRQ | ATA_STAT_SEEK); ataUnsetStatus(pCtl, s, ATA_STAT_BUSY); } static void ataHCPIOTransferStop(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s) { Log2(("%s: LUN#%d\n", __FUNCTION__, s->iLUN)); if (s->fATAPITransfer) { s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); ataHCSetIRQ(pDevIns, pCtl, s); s->fATAPITransfer = false; } s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferPIODataStart = 0; s->iIOBufferPIODataEnd = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } static void ataHCPIOTransferLimitATAPI(PATADEVSTATE s) { uint32_t cbLimit, cbTransfer; cbLimit = s->cbPIOTransferLimit; /* Use maximum transfer size if the guest requested 0. Avoids a hang. */ if (cbLimit == 0) cbLimit = 0xfffe; Log2(("%s: byte count limit=%d\n", __FUNCTION__, cbLimit)); if (cbLimit == 0xffff) cbLimit--; cbTransfer = RT_MIN(s->cbTotalTransfer, s->iIOBufferEnd - s->iIOBufferCur); if (cbTransfer > cbLimit) { /* Byte count limit for clipping must be even in this case */ if (cbLimit & 1) cbLimit--; cbTransfer = cbLimit; } s->uATARegLCyl = cbTransfer; s->uATARegHCyl = cbTransfer >> 8; s->cbElementaryTransfer = cbTransfer; } # ifdef IN_RING3 /** * Enters the lock protecting the controller data against concurrent access. * * @returns nothing. * @param pDevIns The device instance. * @param pCtl The controller to lock. */ DECLINLINE(void) ataR3LockEnter(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { STAM_PROFILE_START(&pCtl->StatLockWait, a); PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_SUCCESS); STAM_PROFILE_STOP(&pCtl->StatLockWait, a); } /** * Leaves the lock protecting the controller against concurrent data access. * * @returns nothing. * @param pDevIns The device instance. * @param pCtl The controller to unlock. */ DECLINLINE(void) ataR3LockLeave(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } static uint32_t ataR3GetNSectors(PATADEVSTATE s) { /* 0 means either 256 (LBA28) or 65536 (LBA48) sectors. */ if (s->fLBA48) { if (!s->uATARegNSector && !s->uATARegNSectorHOB) return 65536; else return s->uATARegNSectorHOB << 8 | s->uATARegNSector; } else { if (!s->uATARegNSector) return 256; else return s->uATARegNSector; } } static void ataR3PadString(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i ^ 1] = *pbSrc++; else pbDst[i ^ 1] = ' '; } } #if 0 /* unused */ /** * Compares two MSF values. * * @returns 1 if the first value is greater than the second value. * 0 if both are equal * -1 if the first value is smaller than the second value. */ DECLINLINE(int) atapiCmpMSF(const uint8_t *pbMSF1, const uint8_t *pbMSF2) { int iRes = 0; for (unsigned i = 0; i < 3; i++) { if (pbMSF1[i] < pbMSF2[i]) { iRes = -1; break; } else if (pbMSF1[i] > pbMSF2[i]) { iRes = 1; break; } } return iRes; } #endif /* unused */ static void ataR3CmdOK(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t status) { s->uATARegError = 0; /* Not needed by ATA spec, but cannot hurt. */ ataSetStatusValue(pCtl, s, ATA_STAT_READY | status); } static void ataR3CmdError(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t uErrorCode) { Log(("%s: code=%#x\n", __FUNCTION__, uErrorCode)); Assert(uErrorCode); s->uATARegError = uErrorCode; ataSetStatusValue(pCtl, s, ATA_STAT_READY | ATA_STAT_ERR); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iIOBufferCur = 0; s->iIOBufferEnd = 0; s->uTxDir = PDMMEDIATXDIR_NONE; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } static uint32_t ataR3Checksum(void* ptr, size_t count) { uint8_t u8Sum = 0xa5, *p = (uint8_t*)ptr; size_t i; for (i = 0; i < count; i++) { u8Sum += *p++; } return (uint8_t)-(int32_t)u8Sum; } /** * Sink/Source: IDENTIFY */ static bool ataR3IdentifySS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint16_t *p; RT_NOREF(pDevIns); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer == 512); p = (uint16_t *)&s->abIOBuffer[0]; memset(p, 0, 512); p[0] = RT_H2LE_U16(0x0040); p[1] = RT_H2LE_U16(RT_MIN(s->PCHSGeometry.cCylinders, 16383)); p[3] = RT_H2LE_U16(s->PCHSGeometry.cHeads); /* Block size; obsolete, but required for the BIOS. */ p[5] = RT_H2LE_U16(s->cbSector); p[6] = RT_H2LE_U16(s->PCHSGeometry.cSectors); ataR3PadString((uint8_t *)(p + 10), s->szSerialNumber, ATA_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ p[22] = RT_H2LE_U16(0); /* ECC bytes per sector */ ataR3PadString((uint8_t *)(p + 23), s->szFirmwareRevision, ATA_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataR3PadString((uint8_t *)(p + 27), s->szModelNumber, ATA_MODEL_NUMBER_LENGTH); /* model */ # if ATA_MAX_MULT_SECTORS > 1 p[47] = RT_H2LE_U16(0x8000 | ATA_MAX_MULT_SECTORS); # endif p[48] = RT_H2LE_U16(1); /* dword I/O, used by the BIOS */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 | 1 << 1 | 1 << 2); /* words 54-58,64-70,88 valid */ p[54] = RT_H2LE_U16(RT_MIN(s->PCHSGeometry.cCylinders, 16383)); p[55] = RT_H2LE_U16(s->PCHSGeometry.cHeads); p[56] = RT_H2LE_U16(s->PCHSGeometry.cSectors); p[57] = RT_H2LE_U16( RT_MIN(s->PCHSGeometry.cCylinders, 16383) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); p[58] = RT_H2LE_U16( RT_MIN(s->PCHSGeometry.cCylinders, 16383) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors >> 16); if (s->cMultSectors) p[59] = RT_H2LE_U16(0x100 | s->cMultSectors); if (s->cTotalSectors <= (1 << 28) - 1) { p[60] = RT_H2LE_U16(s->cTotalSectors); p[61] = RT_H2LE_U16(s->cTotalSectors >> 16); } else { /* Report maximum number of sectors possible with LBA28 */ p[60] = RT_H2LE_U16(((1 << 28) - 1) & 0xffff); p[61] = RT_H2LE_U16(((1 << 28) - 1) >> 16); } p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, s->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ if ( pDevR3->pDrvMedia->pfnDiscard || s->cbSector != 512 || pDevR3->pDrvMedia->pfnIsNonRotational(pDevR3->pDrvMedia)) { p[80] = RT_H2LE_U16(0x1f0); /* support everything up to ATA/ATAPI-8 ACS */ p[81] = RT_H2LE_U16(0x28); /* conforms to ATA/ATAPI-8 ACS */ } else { p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ } p[82] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* supports power management, write cache and look-ahead */ if (s->cTotalSectors <= (1 << 28) - 1) p[83] = RT_H2LE_U16(1 << 14 | 1 << 12); /* supports FLUSH CACHE */ else p[83] = RT_H2LE_U16(1 << 14 | 1 << 10 | 1 << 12 | 1 << 13); /* supports LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* enabled power management, write cache and look-ahead */ if (s->cTotalSectors <= (1 << 28) - 1) p[86] = RT_H2LE_U16(1 << 12); /* enabled FLUSH CACHE */ else p[86] = RT_H2LE_U16(1 << 10 | 1 << 12 | 1 << 13); /* enabled LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, s->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((s->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); if (s->cTotalSectors > (1 << 28) - 1) { p[100] = RT_H2LE_U16(s->cTotalSectors); p[101] = RT_H2LE_U16(s->cTotalSectors >> 16); p[102] = RT_H2LE_U16(s->cTotalSectors >> 32); p[103] = RT_H2LE_U16(s->cTotalSectors >> 48); } if (s->cbSector != 512) { uint32_t cSectorSizeInWords = s->cbSector / sizeof(uint16_t); /* Enable reporting of logical sector size. */ p[106] |= RT_H2LE_U16(RT_BIT(12) | RT_BIT(14)); p[117] = RT_H2LE_U16(cSectorSizeInWords); p[118] = RT_H2LE_U16(cSectorSizeInWords >> 16); } if (pDevR3->pDrvMedia->pfnDiscard) /** @todo Set bit 14 in word 69 too? (Deterministic read after TRIM). */ p[169] = RT_H2LE_U16(1); /* DATA SET MANAGEMENT command supported. */ if (pDevR3->pDrvMedia->pfnIsNonRotational(pDevR3->pDrvMedia)) p[217] = RT_H2LE_U16(1); /* Non-rotational medium */ uint32_t uCsum = ataR3Checksum(p, 510); p[255] = RT_H2LE_U16(0xa5 | (uCsum << 8)); /* Integrity word */ s->iSourceSink = ATAFN_SS_NULL; ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); return false; } /** * Sink/Source: FLUSH */ static bool ataR3FlushSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { int rc; Assert(s->uTxDir == PDMMEDIATXDIR_NONE); Assert(!s->cbElementaryTransfer); ataR3LockLeave(pDevIns, pCtl); STAM_PROFILE_START(&s->StatFlushes, f); rc = pDevR3->pDrvMedia->pfnFlush(pDevR3->pDrvMedia); AssertRC(rc); STAM_PROFILE_STOP(&s->StatFlushes, f); ataR3LockEnter(pDevIns, pCtl); ataR3CmdOK(pCtl, s, 0); return false; } /** * Sink/Source: ATAPI IDENTIFY */ static bool atapiR3IdentifySS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint16_t *p; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer == 512); p = (uint16_t *)&s->abIOBuffer[0]; memset(p, 0, 512); /* Removable CDROM, 3ms response, 12 byte packets */ p[0] = RT_H2LE_U16(2 << 14 | 5 << 8 | 1 << 7 | 0 << 5 | 0 << 0); ataR3PadString((uint8_t *)(p + 10), s->szSerialNumber, ATA_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ ataR3PadString((uint8_t *)(p + 23), s->szFirmwareRevision, ATA_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataR3PadString((uint8_t *)(p + 27), s->szModelNumber, ATA_MODEL_NUMBER_LENGTH); /* model */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 << 1 | 1 << 2); /* words 64-70,88 are valid */ p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, s->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ p[73] = RT_H2LE_U16(0x003e); /* ATAPI CDROM major */ p[74] = RT_H2LE_U16(9); /* ATAPI CDROM minor */ p[75] = RT_H2LE_U16(1); /* queue depth 1 */ p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ p[82] = RT_H2LE_U16(1 << 4 | 1 << 9); /* supports packet command set and DEVICE RESET */ p[83] = RT_H2LE_U16(1 << 14); p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 4 | 1 << 9); /* enabled packet command set and DEVICE RESET */ p[86] = RT_H2LE_U16(0); p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, s->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((s->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); /* According to ATAPI-5 spec: * * The use of this word is optional. * If bits 7:0 of this word contain the signature A5h, bits 15:8 * contain the data * structure checksum. * The data structure checksum is the twos complement of the sum of * all bytes in words 0 through 254 and the byte consisting of * bits 7:0 in word 255. * Each byte shall be added with unsigned arithmetic, * and overflow shall be ignored. * The sum of all 512 bytes is zero when the checksum is correct. */ uint32_t uCsum = ataR3Checksum(p, 510); p[255] = RT_H2LE_U16(0xa5 | (uCsum << 8)); /* Integrity word */ s->iSourceSink = ATAFN_SS_NULL; ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); return false; } static void ataR3SetSignature(PATADEVSTATE s) { s->uATARegSelect &= 0xf0; /* clear head */ /* put signature */ s->uATARegNSector = 1; s->uATARegSector = 1; if (s->fATAPI) { s->uATARegLCyl = 0x14; s->uATARegHCyl = 0xeb; } else { s->uATARegLCyl = 0; s->uATARegHCyl = 0; } } static uint64_t ataR3GetSector(PATADEVSTATE s) { uint64_t iLBA; if (s->uATARegSelect & 0x40) { /* any LBA variant */ if (s->fLBA48) { /* LBA48 */ iLBA = ((uint64_t)s->uATARegHCylHOB << 40) | ((uint64_t)s->uATARegLCylHOB << 32) | ((uint64_t)s->uATARegSectorHOB << 24) | ((uint64_t)s->uATARegHCyl << 16) | ((uint64_t)s->uATARegLCyl << 8) | s->uATARegSector; } else { /* LBA */ iLBA = ((uint32_t)(s->uATARegSelect & 0x0f) << 24) | ((uint32_t)s->uATARegHCyl << 16) | ((uint32_t)s->uATARegLCyl << 8) | s->uATARegSector; } } else { /* CHS */ iLBA = (((uint32_t)s->uATARegHCyl << 8) | s->uATARegLCyl) * s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors + (s->uATARegSelect & 0x0f) * s->PCHSGeometry.cSectors + (s->uATARegSector - 1); LogFlowFunc(("CHS %u/%u/%u -> LBA %llu\n", ((uint32_t)s->uATARegHCyl << 8) | s->uATARegLCyl, s->uATARegSelect & 0x0f, s->uATARegSector, iLBA)); } return iLBA; } static void ataR3SetSector(PATADEVSTATE s, uint64_t iLBA) { uint32_t cyl, r; if (s->uATARegSelect & 0x40) { /* any LBA variant */ if (s->fLBA48) { /* LBA48 */ s->uATARegHCylHOB = iLBA >> 40; s->uATARegLCylHOB = iLBA >> 32; s->uATARegSectorHOB = iLBA >> 24; s->uATARegHCyl = iLBA >> 16; s->uATARegLCyl = iLBA >> 8; s->uATARegSector = iLBA; } else { /* LBA */ s->uATARegSelect = (s->uATARegSelect & 0xf0) | (iLBA >> 24); s->uATARegHCyl = (iLBA >> 16); s->uATARegLCyl = (iLBA >> 8); s->uATARegSector = (iLBA); } } else { /* CHS */ cyl = iLBA / (s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); r = iLBA % (s->PCHSGeometry.cHeads * s->PCHSGeometry.cSectors); s->uATARegHCyl = cyl >> 8; s->uATARegLCyl = cyl; s->uATARegSelect = (s->uATARegSelect & 0xf0) | ((r / s->PCHSGeometry.cSectors) & 0x0f); s->uATARegSector = (r % s->PCHSGeometry.cSectors) + 1; LogFlowFunc(("LBA %llu -> CHS %u/%u/%u\n", iLBA, cyl, s->uATARegSelect & 0x0f, s->uATARegSector)); } } static void ataR3WarningDiskFull(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: Host disk full\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_DISKFULL", N_("Host system reported disk full. VM execution is suspended. You can resume after freeing some space")); AssertRC(rc); } static void ataR3WarningFileTooBig(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: File too big\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_FILETOOBIG", N_("Host system reported that the file size limit of the host file system has been exceeded. VM execution is suspended. You need to move your virtual hard disk to a filesystem which allows bigger files")); AssertRC(rc); } static void ataR3WarningISCSI(PPDMDEVINS pDevIns) { int rc; LogRel(("PIIX3 ATA: iSCSI target unavailable\n")); rc = PDMDevHlpVMSetRuntimeError(pDevIns, VMSETRTERR_FLAGS_SUSPEND | VMSETRTERR_FLAGS_NO_WAIT, "DevATA_ISCSIDOWN", N_("The iSCSI target has stopped responding. VM execution is suspended. You can resume when it is available again")); AssertRC(rc); } static bool ataR3IsRedoSetWarning(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, int rc) { Assert(!PDMDevHlpCritSectIsOwner(pDevIns, &pCtl->lock)); if (rc == VERR_DISK_FULL) { pCtl->fRedoIdle = true; ataR3WarningDiskFull(pDevIns); return true; } if (rc == VERR_FILE_TOO_BIG) { pCtl->fRedoIdle = true; ataR3WarningFileTooBig(pDevIns); return true; } if (rc == VERR_BROKEN_PIPE || rc == VERR_NET_CONNECTION_REFUSED) { pCtl->fRedoIdle = true; /* iSCSI connection abort (first error) or failure to reestablish * connection (second error). Pause VM. On resume we'll retry. */ ataR3WarningISCSI(pDevIns); return true; } if (rc == VERR_VD_DEK_MISSING) { /* Error message already set. */ pCtl->fRedoIdle = true; return true; } return false; } static int ataR3ReadSectors(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3, uint64_t u64Sector, void *pvBuf, uint32_t cSectors, bool *pfRedo) { int rc; uint32_t const cbSector = s->cbSector; uint32_t cbToRead = cSectors * cbSector; Assert(pvBuf == &s->abIOBuffer[0]); AssertReturnStmt(cbToRead <= sizeof(s->abIOBuffer), *pfRedo = false, VERR_BUFFER_OVERFLOW); ataR3LockLeave(pDevIns, pCtl); STAM_PROFILE_ADV_START(&s->StatReads, r); s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; rc = pDevR3->pDrvMedia->pfnRead(pDevR3->pDrvMedia, u64Sector * cbSector, pvBuf, cbToRead); s->Led.Actual.s.fReading = 0; STAM_PROFILE_ADV_STOP(&s->StatReads, r); Log4(("ataR3ReadSectors: rc=%Rrc cSectors=%#x u64Sector=%llu\n%.*Rhxd\n", rc, cSectors, u64Sector, cbToRead, pvBuf)); STAM_REL_COUNTER_ADD(&s->StatBytesRead, cbToRead); if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataR3IsRedoSetWarning(pDevIns, pCtl, rc); ataR3LockEnter(pDevIns, pCtl); return rc; } static int ataR3WriteSectors(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3, uint64_t u64Sector, const void *pvBuf, uint32_t cSectors, bool *pfRedo) { int rc; uint32_t const cbSector = s->cbSector; uint32_t cbToWrite = cSectors * cbSector; Assert(pvBuf == &s->abIOBuffer[0]); AssertReturnStmt(cbToWrite <= sizeof(s->abIOBuffer), *pfRedo = false, VERR_BUFFER_OVERFLOW); ataR3LockLeave(pDevIns, pCtl); STAM_PROFILE_ADV_START(&s->StatWrites, w); s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; # ifdef VBOX_INSTRUMENT_DMA_WRITES if (s->fDMA) STAM_PROFILE_ADV_START(&s->StatInstrVDWrites, vw); # endif rc = pDevR3->pDrvMedia->pfnWrite(pDevR3->pDrvMedia, u64Sector * cbSector, pvBuf, cbToWrite); # ifdef VBOX_INSTRUMENT_DMA_WRITES if (s->fDMA) STAM_PROFILE_ADV_STOP(&s->StatInstrVDWrites, vw); # endif s->Led.Actual.s.fWriting = 0; STAM_PROFILE_ADV_STOP(&s->StatWrites, w); Log4(("ataR3WriteSectors: rc=%Rrc cSectors=%#x u64Sector=%llu\n%.*Rhxd\n", rc, cSectors, u64Sector, cbToWrite, pvBuf)); STAM_REL_COUNTER_ADD(&s->StatBytesWritten, cbToWrite); if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataR3IsRedoSetWarning(pDevIns, pCtl, rc); ataR3LockEnter(pDevIns, pCtl); return rc; } /** * Begin Transfer: READ/WRITE SECTORS */ static void ataR3ReadWriteSectorsBT(PATACONTROLLER pCtl, PATADEVSTATE s) { uint32_t const cbSector = RT_MAX(s->cbSector, 1); uint32_t cSectors; cSectors = s->cbTotalTransfer / cbSector; if (cSectors > s->cSectorsPerIRQ) s->cbElementaryTransfer = s->cSectorsPerIRQ * cbSector; else s->cbElementaryTransfer = cSectors * cbSector; if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE) ataR3CmdOK(pCtl, s, 0); } /** * Sink/Source: READ SECTORS */ static bool ataR3ReadSectorsSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint32_t const cbSector = RT_MAX(s->cbSector, 1); uint32_t cSectors; uint64_t iLBA; bool fRedo; int rc; cSectors = s->cbElementaryTransfer / cbSector; Assert(cSectors); iLBA = ataR3GetSector(s); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iLBA)); rc = ataR3ReadSectors(pDevIns, pCtl, s, pDevR3, iLBA, s->abIOBuffer, cSectors, &fRedo); if (RT_SUCCESS(rc)) { /* When READ SECTORS etc. finishes, the address in the task * file register points at the last sector read, not at the next * sector that would be read. This ensures the registers always * contain a valid sector address. */ if (s->cbElementaryTransfer == s->cbTotalTransfer) { s->iSourceSink = ATAFN_SS_NULL; ataR3SetSector(s, iLBA + cSectors - 1); } else ataR3SetSector(s, iLBA + cSectors); s->uATARegNSector -= cSectors; ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk read error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, iLBA, cSectors)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataR3CmdError(pCtl, s, ID_ERR); } return false; } /** * Sink/Source: WRITE SECTOR */ static bool ataR3WriteSectorsSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint32_t const cbSector = RT_MAX(s->cbSector, 1); uint64_t iLBA; uint32_t cSectors; bool fRedo; int rc; cSectors = s->cbElementaryTransfer / cbSector; Assert(cSectors); iLBA = ataR3GetSector(s); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iLBA)); rc = ataR3WriteSectors(pDevIns, pCtl, s, pDevR3, iLBA, s->abIOBuffer, cSectors, &fRedo); if (RT_SUCCESS(rc)) { ataR3SetSector(s, iLBA + cSectors); if (!s->cbTotalTransfer) s->iSourceSink = ATAFN_SS_NULL; ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk write error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, iLBA, cSectors)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataR3CmdError(pCtl, s, ID_ERR); } return false; } static void atapiR3CmdOK(PATACONTROLLER pCtl, PATADEVSTATE s) { s->uATARegError = 0; ataSetStatusValue(pCtl, s, ATA_STAT_READY); s->uATARegNSector = (s->uATARegNSector & ~7) | ((s->uTxDir != PDMMEDIATXDIR_TO_DEVICE) ? ATAPI_INT_REASON_IO : 0) | (!s->cbTotalTransfer ? ATAPI_INT_REASON_CD : 0); Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); memset(s->abATAPISense, '\0', sizeof(s->abATAPISense)); s->abATAPISense[0] = 0x70 | (1 << 7); s->abATAPISense[7] = 10; } static void atapiR3CmdError(PATACONTROLLER pCtl, PATADEVSTATE s, const uint8_t *pabATAPISense, size_t cbATAPISense) { Log(("%s: sense=%#x (%s) asc=%#x ascq=%#x (%s)\n", __FUNCTION__, pabATAPISense[2] & 0x0f, SCSISenseText(pabATAPISense[2] & 0x0f), pabATAPISense[12], pabATAPISense[13], SCSISenseExtText(pabATAPISense[12], pabATAPISense[13]))); s->uATARegError = pabATAPISense[2] << 4; ataSetStatusValue(pCtl, s, ATA_STAT_READY | ATA_STAT_ERR); s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); memset(s->abATAPISense, '\0', sizeof(s->abATAPISense)); memcpy(s->abATAPISense, pabATAPISense, RT_MIN(cbATAPISense, sizeof(s->abATAPISense))); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->cbAtapiPassthroughTransfer = 0; s->iIOBufferCur = 0; s->iIOBufferEnd = 0; s->uTxDir = PDMMEDIATXDIR_NONE; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } /** @todo deprecated function - doesn't provide enough info. Replace by direct * calls to atapiR3CmdError() with full data. */ static void atapiR3CmdErrorSimple(PATACONTROLLER pCtl, PATADEVSTATE s, uint8_t uATAPISenseKey, uint8_t uATAPIASC) { uint8_t abATAPISense[ATAPI_SENSE_SIZE]; memset(abATAPISense, '\0', sizeof(abATAPISense)); abATAPISense[0] = 0x70 | (1 << 7); abATAPISense[2] = uATAPISenseKey & 0x0f; abATAPISense[7] = 10; abATAPISense[12] = uATAPIASC; atapiR3CmdError(pCtl, s, abATAPISense, sizeof(abATAPISense)); } /** * Begin Transfer: ATAPI command */ static void atapiR3CmdBT(PATACONTROLLER pCtl, PATADEVSTATE s) { s->fATAPITransfer = true; s->cbElementaryTransfer = s->cbTotalTransfer; s->cbAtapiPassthroughTransfer = s->cbTotalTransfer; s->cbPIOTransferLimit = s->uATARegLCyl | (s->uATARegHCyl << 8); if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE) atapiR3CmdOK(pCtl, s); } /** * Begin Transfer: ATAPI Passthrough command */ static void atapiR3PassthroughCmdBT(PATACONTROLLER pCtl, PATADEVSTATE s) { atapiR3CmdBT(pCtl, s); } /** * Sink/Source: READ */ static bool atapiR3ReadSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { int rc; uint64_t cbBlockRegion = 0; Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); uint32_t const iATAPILBA = s->iATAPILBA; uint32_t const cbTransfer = RT_MIN(s->cbTotalTransfer, RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE)); uint32_t const cbATAPISector = s->cbATAPISector; uint32_t const cSectors = cbTransfer / cbATAPISector; Assert(cSectors * cbATAPISector <= cbTransfer); Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iATAPILBA)); AssertLogRelReturn(cSectors * cbATAPISector <= sizeof(s->abIOBuffer), false); ataR3LockLeave(pDevIns, pCtl); rc = pDevR3->pDrvMedia->pfnQueryRegionPropertiesForLba(pDevR3->pDrvMedia, iATAPILBA, NULL, NULL, &cbBlockRegion, NULL); if (RT_SUCCESS(rc)) { STAM_PROFILE_ADV_START(&s->StatReads, r); s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; /* If the region block size and requested sector matches we can just pass the request through. */ if (cbBlockRegion == cbATAPISector) rc = pDevR3->pDrvMedia->pfnRead(pDevR3->pDrvMedia, (uint64_t)iATAPILBA * cbATAPISector, s->abIOBuffer, cbATAPISector * cSectors); else { uint32_t const iEndSector = iATAPILBA + cSectors; ASSERT_GUEST(iEndSector >= iATAPILBA); if (cbBlockRegion == 2048 && cbATAPISector == 2352) { /* Generate the sync bytes. */ uint8_t *pbBuf = s->abIOBuffer; for (uint32_t i = iATAPILBA; i < iEndSector; i++) { /* Sync bytes, see 4.2.3.8 CD Main Channel Block Formats */ *pbBuf++ = 0x00; memset(pbBuf, 0xff, 10); pbBuf += 10; *pbBuf++ = 0x00; /* MSF */ scsiLBA2MSF(pbBuf, i); pbBuf += 3; *pbBuf++ = 0x01; /* mode 1 data */ /* data */ rc = pDevR3->pDrvMedia->pfnRead(pDevR3->pDrvMedia, (uint64_t)i * 2048, pbBuf, 2048); if (RT_FAILURE(rc)) break; pbBuf += 2048; /** * @todo maybe compute ECC and parity, layout is: * 2072 4 EDC * 2076 172 P parity symbols * 2248 104 Q parity symbols */ memset(pbBuf, 0, 280); pbBuf += 280; } } else if (cbBlockRegion == 2352 && cbATAPISector == 2048) { /* Read only the user data portion. */ uint8_t *pbBuf = s->abIOBuffer; for (uint32_t i = iATAPILBA; i < iEndSector; i++) { uint8_t abTmp[2352]; rc = pDevR3->pDrvMedia->pfnRead(pDevR3->pDrvMedia, (uint64_t)i * 2352, &abTmp[0], 2352); if (RT_FAILURE(rc)) break; memcpy(pbBuf, &abTmp[16], 2048); pbBuf += 2048; } } else ASSERT_GUEST_MSG_FAILED(("Unsupported: cbBlockRegion=%u cbATAPISector=%u\n", cbBlockRegion, cbATAPISector)); } s->Led.Actual.s.fReading = 0; STAM_PROFILE_ADV_STOP(&s->StatReads, r); } ataR3LockEnter(pDevIns, pCtl); if (RT_SUCCESS(rc)) { STAM_REL_COUNTER_ADD(&s->StatBytesRead, cbATAPISector * cSectors); /* The initial buffer end value has been set up based on the total * transfer size. But the I/O buffer size limits what can actually be * done in one transfer, so set the actual value of the buffer end. */ s->cbElementaryTransfer = cbTransfer; if (cbTransfer >= s->cbTotalTransfer) s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); s->iATAPILBA = iATAPILBA + cSectors; } else { if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM read error, %d sectors at LBA %d\n", s->iLUN, cSectors, iATAPILBA)); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_MEDIUM_ERROR, SCSI_ASC_READ_ERROR); } return false; } /** * Sets the given media track type. */ static uint32_t ataR3MediumTypeSet(PATADEVSTATE s, uint32_t MediaTrackType) { return ASMAtomicXchgU32(&s->MediaTrackType, MediaTrackType); } /** * Sink/Source: Passthrough */ static bool atapiR3PassthroughSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { int rc = VINF_SUCCESS; uint8_t abATAPISense[ATAPI_SENSE_SIZE]; uint32_t cbTransfer; PSTAMPROFILEADV pProf = NULL; cbTransfer = RT_MIN(s->cbAtapiPassthroughTransfer, RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE)); if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE) Log3(("ATAPI PT data write (%d): %.*Rhxs\n", cbTransfer, cbTransfer, s->abIOBuffer)); /* Simple heuristics: if there is at least one sector of data * to transfer, it's worth updating the LEDs. */ if (cbTransfer >= 2048) { if (s->uTxDir != PDMMEDIATXDIR_TO_DEVICE) { s->Led.Asserted.s.fReading = s->Led.Actual.s.fReading = 1; pProf = &s->StatReads; } else { s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; pProf = &s->StatWrites; } } ataR3LockLeave(pDevIns, pCtl); # if defined(LOG_ENABLED) char szBuf[1024]; memset(szBuf, 0, sizeof(szBuf)); switch (s->abATAPICmd[0]) { case SCSI_MODE_SELECT_10: { size_t cbBlkDescLength = scsiBE2H_U16(&s->abIOBuffer[6]); SCSILogModePage(szBuf, sizeof(szBuf) - 1, s->abIOBuffer + 8 + cbBlkDescLength, cbTransfer - 8 - cbBlkDescLength); break; } case SCSI_SEND_CUE_SHEET: { SCSILogCueSheet(szBuf, sizeof(szBuf) - 1, s->abIOBuffer, cbTransfer); break; } default: break; } Log2(("%s\n", szBuf)); # endif if (pProf) { STAM_PROFILE_ADV_START(pProf, b); } Assert(s->cbATAPISector); const uint32_t cbATAPISector = RT_MAX(s->cbATAPISector, 1); /* paranoia */ const uint32_t cbIOBuffer = RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE); /* ditto */ if ( cbTransfer > SCSI_MAX_BUFFER_SIZE || s->cbElementaryTransfer > cbIOBuffer) { /* Linux accepts commands with up to 100KB of data, but expects * us to handle commands with up to 128KB of data. The usual * imbalance of powers. */ uint8_t abATAPICmd[ATAPI_PACKET_SIZE]; uint32_t iATAPILBA, cSectors, cReqSectors, cbCurrTX; uint8_t *pbBuf = s->abIOBuffer; uint32_t cSectorsMax; /**< Maximum amount of sectors to read without exceeding the I/O buffer. */ cSectorsMax = cbTransfer / cbATAPISector; AssertStmt(cSectorsMax * s->cbATAPISector <= cbIOBuffer, cSectorsMax = cbIOBuffer / cbATAPISector); switch (s->abATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: iATAPILBA = scsiBE2H_U32(s->abATAPICmd + 2); cSectors = scsiBE2H_U16(s->abATAPICmd + 7); break; case SCSI_READ_12: case SCSI_WRITE_12: iATAPILBA = scsiBE2H_U32(s->abATAPICmd + 2); cSectors = scsiBE2H_U32(s->abATAPICmd + 6); break; case SCSI_READ_CD: iATAPILBA = scsiBE2H_U32(s->abATAPICmd + 2); cSectors = scsiBE2H_U24(s->abATAPICmd + 6); break; case SCSI_READ_CD_MSF: iATAPILBA = scsiMSF2LBA(s->abATAPICmd + 3); cSectors = scsiMSF2LBA(s->abATAPICmd + 6) - iATAPILBA; break; default: AssertMsgFailed(("Don't know how to split command %#04x\n", s->abATAPICmd[0])); if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough split error\n", s->iLUN)); atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); ataR3LockEnter(pDevIns, pCtl); return false; } cSectorsMax = RT_MIN(cSectorsMax, cSectors); memcpy(abATAPICmd, s->abATAPICmd, ATAPI_PACKET_SIZE); cReqSectors = 0; for (uint32_t i = cSectorsMax; i > 0; i -= cReqSectors) { if (i * cbATAPISector > SCSI_MAX_BUFFER_SIZE) cReqSectors = SCSI_MAX_BUFFER_SIZE / cbATAPISector; else cReqSectors = i; cbCurrTX = cbATAPISector * cReqSectors; switch (s->abATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: scsiH2BE_U32(abATAPICmd + 2, iATAPILBA); scsiH2BE_U16(abATAPICmd + 7, cReqSectors); break; case SCSI_READ_12: case SCSI_WRITE_12: scsiH2BE_U32(abATAPICmd + 2, iATAPILBA); scsiH2BE_U32(abATAPICmd + 6, cReqSectors); break; case SCSI_READ_CD: scsiH2BE_U32(abATAPICmd + 2, iATAPILBA); scsiH2BE_U24(abATAPICmd + 6, cReqSectors); break; case SCSI_READ_CD_MSF: scsiLBA2MSF(abATAPICmd + 3, iATAPILBA); scsiLBA2MSF(abATAPICmd + 6, iATAPILBA + cReqSectors); break; } AssertLogRelReturn((uintptr_t)(pbBuf - &s->abIOBuffer[0]) + cbCurrTX <= sizeof(s->abIOBuffer), false); rc = pDevR3->pDrvMedia->pfnSendCmd(pDevR3->pDrvMedia, abATAPICmd, ATAPI_PACKET_SIZE, (PDMMEDIATXDIR)s->uTxDir, pbBuf, &cbCurrTX, abATAPISense, sizeof(abATAPISense), 30000 /**< @todo timeout */); if (rc != VINF_SUCCESS) break; iATAPILBA += cReqSectors; pbBuf += cbATAPISector * cReqSectors; } if (RT_SUCCESS(rc)) { /* Adjust ATAPI command for the next call. */ switch (s->abATAPICmd[0]) { case SCSI_READ_10: case SCSI_WRITE_10: case SCSI_WRITE_AND_VERIFY_10: scsiH2BE_U32(s->abATAPICmd + 2, iATAPILBA); scsiH2BE_U16(s->abATAPICmd + 7, cSectors - cSectorsMax); break; case SCSI_READ_12: case SCSI_WRITE_12: scsiH2BE_U32(s->abATAPICmd + 2, iATAPILBA); scsiH2BE_U32(s->abATAPICmd + 6, cSectors - cSectorsMax); break; case SCSI_READ_CD: scsiH2BE_U32(s->abATAPICmd + 2, iATAPILBA); scsiH2BE_U24(s->abATAPICmd + 6, cSectors - cSectorsMax); break; case SCSI_READ_CD_MSF: scsiLBA2MSF(s->abATAPICmd + 3, iATAPILBA); scsiLBA2MSF(s->abATAPICmd + 6, iATAPILBA + cSectors - cSectorsMax); break; default: AssertMsgFailed(("Don't know how to split command %#04x\n", s->abATAPICmd[0])); if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough split error\n", s->iLUN)); atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); return false; } } } else { AssertLogRelReturn(cbTransfer <= sizeof(s->abIOBuffer), false); rc = pDevR3->pDrvMedia->pfnSendCmd(pDevR3->pDrvMedia, s->abATAPICmd, ATAPI_PACKET_SIZE, (PDMMEDIATXDIR)s->uTxDir, s->abIOBuffer, &cbTransfer, abATAPISense, sizeof(abATAPISense), 30000 /**< @todo timeout */); } if (pProf) { STAM_PROFILE_ADV_STOP(pProf, b); } ataR3LockEnter(pDevIns, pCtl); /* Update the LEDs and the read/write statistics. */ if (cbTransfer >= 2048) { if (s->uTxDir != PDMMEDIATXDIR_TO_DEVICE) { s->Led.Actual.s.fReading = 0; STAM_REL_COUNTER_ADD(&s->StatBytesRead, cbTransfer); } else { s->Led.Actual.s.fWriting = 0; STAM_REL_COUNTER_ADD(&s->StatBytesWritten, cbTransfer); } } if (RT_SUCCESS(rc)) { /* Do post processing for certain commands. */ switch (s->abATAPICmd[0]) { case SCSI_SEND_CUE_SHEET: case SCSI_READ_TOC_PMA_ATIP: { if (!pDevR3->pTrackList) rc = ATAPIPassthroughTrackListCreateEmpty(&pDevR3->pTrackList); if (RT_SUCCESS(rc)) rc = ATAPIPassthroughTrackListUpdate(pDevR3->pTrackList, s->abATAPICmd, s->abIOBuffer, sizeof(s->abIOBuffer)); if ( RT_FAILURE(rc) && s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("ATA: Error (%Rrc) while updating the tracklist during %s, burning the disc might fail\n", rc, s->abATAPICmd[0] == SCSI_SEND_CUE_SHEET ? "SEND CUE SHEET" : "READ TOC/PMA/ATIP")); break; } case SCSI_SYNCHRONIZE_CACHE: { if (pDevR3->pTrackList) ATAPIPassthroughTrackListClear(pDevR3->pTrackList); break; } } if (s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE) { /* * Reply with the same amount of data as the real drive * but only if the command wasn't split. */ if (s->cbAtapiPassthroughTransfer < cbIOBuffer) s->cbTotalTransfer = cbTransfer; if ( s->abATAPICmd[0] == SCSI_INQUIRY && s->fOverwriteInquiry) { /* Make sure that the real drive cannot be identified. * Motivation: changing the VM configuration should be as * invisible as possible to the guest. */ Log3(("ATAPI PT inquiry data before (%d): %.*Rhxs\n", cbTransfer, cbTransfer, s->abIOBuffer)); scsiPadStr(&s->abIOBuffer[8], "VBOX", 8); scsiPadStr(&s->abIOBuffer[16], "CD-ROM", 16); scsiPadStr(&s->abIOBuffer[32], "1.0", 4); } if (cbTransfer) Log3(("ATAPI PT data read (%d):\n%.*Rhxd\n", cbTransfer, cbTransfer, s->abIOBuffer)); } /* The initial buffer end value has been set up based on the total * transfer size. But the I/O buffer size limits what can actually be * done in one transfer, so set the actual value of the buffer end. */ Assert(cbTransfer <= s->cbAtapiPassthroughTransfer); s->cbElementaryTransfer = cbTransfer; s->cbAtapiPassthroughTransfer -= cbTransfer; if (!s->cbAtapiPassthroughTransfer) { s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); } } else { if (s->cErrors < MAX_LOG_REL_ERRORS) { uint8_t u8Cmd = s->abATAPICmd[0]; do { /* don't log superfluous errors */ if ( rc == VERR_DEV_IO_ERROR && ( u8Cmd == SCSI_TEST_UNIT_READY || u8Cmd == SCSI_READ_CAPACITY || u8Cmd == SCSI_READ_DVD_STRUCTURE || u8Cmd == SCSI_READ_TOC_PMA_ATIP)) break; s->cErrors++; LogRel(("PIIX3 ATA: LUN#%d: CD-ROM passthrough cmd=%#04x sense=%d ASC=%#02x ASCQ=%#02x %Rrc\n", s->iLUN, u8Cmd, abATAPISense[2] & 0x0f, abATAPISense[12], abATAPISense[13], rc)); } while (0); } atapiR3CmdError(pCtl, s, abATAPISense, sizeof(abATAPISense)); } return false; } /** * Begin Transfer: Read DVD structures */ static bool atapiR3ReadDVDStructureSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *buf = s->abIOBuffer; int media = s->abATAPICmd[1]; int format = s->abATAPICmd[7]; RT_NOREF(pDevIns, pDevR3); AssertCompile(sizeof(s->abIOBuffer) > UINT16_MAX /* want a RT_MIN() below, but clang takes offence at always false stuff */); uint16_t max_len = scsiBE2H_U16(&s->abATAPICmd[8]); memset(buf, 0, max_len); switch (format) { case 0x00: case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x06: case 0x07: case 0x08: case 0x09: case 0x0a: case 0x0b: case 0x0c: case 0x0d: case 0x0e: case 0x0f: case 0x10: case 0x11: case 0x30: case 0x31: case 0xff: if (media == 0) { int uASC = SCSI_ASC_NONE; switch (format) { case 0x0: /* Physical format information */ { int layer = s->abATAPICmd[6]; uint64_t total_sectors; if (layer != 0) { uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; break; } total_sectors = s->cTotalSectors; total_sectors >>= 2; if (total_sectors == 0) { uASC = -SCSI_ASC_MEDIUM_NOT_PRESENT; break; } buf[4] = 1; /* DVD-ROM, part version 1 */ buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ buf[7] = 0; /* default densities */ /* FIXME: 0x30000 per spec? */ scsiH2BE_U32(buf + 8, 0); /* start sector */ scsiH2BE_U32(buf + 12, total_sectors - 1); /* end sector */ scsiH2BE_U32(buf + 16, total_sectors - 1); /* l0 end sector */ /* Size of buffer, not including 2 byte size field */ scsiH2BE_U32(&buf[0], 2048 + 2); /* 2k data + 4 byte header */ uASC = (2048 + 4); break; } case 0x01: /* DVD copyright information */ buf[4] = 0; /* no copyright data */ buf[5] = 0; /* no region restrictions */ /* Size of buffer, not including 2 byte size field */ scsiH2BE_U16(buf, 4 + 2); /* 4 byte header + 4 byte data */ uASC = (4 + 4); break; case 0x03: /* BCA information - invalid field for no BCA info */ uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; break; case 0x04: /* DVD disc manufacturing information */ /* Size of buffer, not including 2 byte size field */ scsiH2BE_U16(buf, 2048 + 2); /* 2k data + 4 byte header */ uASC = (2048 + 4); break; case 0xff: /* * This lists all the command capabilities above. Add new ones * in order and update the length and buffer return values. */ buf[4] = 0x00; /* Physical format */ buf[5] = 0x40; /* Not writable, is readable */ scsiH2BE_U16((buf + 6), 2048 + 4); buf[8] = 0x01; /* Copyright info */ buf[9] = 0x40; /* Not writable, is readable */ scsiH2BE_U16((buf + 10), 4 + 4); buf[12] = 0x03; /* BCA info */ buf[13] = 0x40; /* Not writable, is readable */ scsiH2BE_U16((buf + 14), 188 + 4); buf[16] = 0x04; /* Manufacturing info */ buf[17] = 0x40; /* Not writable, is readable */ scsiH2BE_U16((buf + 18), 2048 + 4); /* Size of buffer, not including 2 byte size field */ scsiH2BE_U16(buf, 16 + 2); /* data written + 4 byte header */ uASC = (16 + 4); break; default: /** @todo formats beyond DVD-ROM requires */ uASC = -SCSI_ASC_INV_FIELD_IN_CMD_PACKET; } if (uASC < 0) { s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, -uASC); return false; } break; } /** @todo BD support, fall through for now */ RT_FALL_THRU(); /* Generic disk structures */ case 0x80: /** @todo AACS volume identifier */ case 0x81: /** @todo AACS media serial number */ case 0x82: /** @todo AACS media identifier */ case 0x83: /** @todo AACS media key block */ case 0x90: /** @todo List of recognized format layers */ case 0xc0: /** @todo Write protection status */ default: s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } static bool atapiR3ReadSectors(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, uint32_t iATAPILBA, uint32_t cSectors, uint32_t cbSector) { Assert(cSectors > 0); s->iATAPILBA = iATAPILBA; s->cbATAPISector = cbSector; ataR3StartTransfer(pDevIns, pCtl, s, cSectors * cbSector, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ, true); return false; } /** * Sink/Source: ATAPI READ CAPACITY */ static bool atapiR3ReadCapacitySS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); scsiH2BE_U32(pbBuf, s->cTotalSectors - 1); scsiH2BE_U32(pbBuf + 4, 2048); s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI READ DISCK INFORMATION */ static bool atapiR3ReadDiscInformationSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 34); memset(pbBuf, '\0', 34); scsiH2BE_U16(pbBuf, 32); pbBuf[2] = (0 << 4) | (3 << 2) | (2 << 0); /* not erasable, complete session, complete disc */ pbBuf[3] = 1; /* number of first track */ pbBuf[4] = 1; /* number of sessions (LSB) */ pbBuf[5] = 1; /* first track number in last session (LSB) */ pbBuf[6] = (uint8_t)pDevR3->pDrvMedia->pfnGetRegionCount(pDevR3->pDrvMedia); /* last track number in last session (LSB) */ pbBuf[7] = (0 << 7) | (0 << 6) | (1 << 5) | (0 << 2) | (0 << 0); /* disc id not valid, disc bar code not valid, unrestricted use, not dirty, not RW medium */ pbBuf[8] = 0; /* disc type = CD-ROM */ pbBuf[9] = 0; /* number of sessions (MSB) */ pbBuf[10] = 0; /* number of sessions (MSB) */ pbBuf[11] = 0; /* number of sessions (MSB) */ scsiH2BE_U32(pbBuf + 16, 0xffffffff); /* last session lead-in start time is not available */ scsiH2BE_U32(pbBuf + 20, 0xffffffff); /* last possible start time for lead-out is not available */ s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI READ TRACK INFORMATION */ static bool atapiR3ReadTrackInformationSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; uint32_t u32LogAddr = scsiBE2H_U32(&s->abATAPICmd[2]); uint8_t u8LogAddrType = s->abATAPICmd[1] & 0x03; RT_NOREF(pDevIns); int rc; uint64_t u64LbaStart = 0; uint32_t uRegion = 0; uint64_t cBlocks = 0; uint64_t cbBlock = 0; uint8_t u8DataMode = 0xf; /* Unknown data mode. */ uint8_t u8TrackMode = 0; VDREGIONDATAFORM enmDataForm = VDREGIONDATAFORM_INVALID; Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 36); switch (u8LogAddrType) { case 0x00: rc = pDevR3->pDrvMedia->pfnQueryRegionPropertiesForLba(pDevR3->pDrvMedia, u32LogAddr, &uRegion, NULL, NULL, NULL); if (RT_SUCCESS(rc)) rc = pDevR3->pDrvMedia->pfnQueryRegionProperties(pDevR3->pDrvMedia, uRegion, &u64LbaStart, &cBlocks, &cbBlock, &enmDataForm); break; case 0x01: { if (u32LogAddr >= 1) { uRegion = u32LogAddr - 1; rc = pDevR3->pDrvMedia->pfnQueryRegionProperties(pDevR3->pDrvMedia, uRegion, &u64LbaStart, &cBlocks, &cbBlock, &enmDataForm); } else rc = VERR_NOT_FOUND; /** @todo Return lead-in information. */ break; } case 0x02: default: atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } if (RT_FAILURE(rc)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } switch (enmDataForm) { case VDREGIONDATAFORM_MODE1_2048: case VDREGIONDATAFORM_MODE1_2352: case VDREGIONDATAFORM_MODE1_0: u8DataMode = 1; break; case VDREGIONDATAFORM_XA_2336: case VDREGIONDATAFORM_XA_2352: case VDREGIONDATAFORM_XA_0: case VDREGIONDATAFORM_MODE2_2336: case VDREGIONDATAFORM_MODE2_2352: case VDREGIONDATAFORM_MODE2_0: u8DataMode = 2; break; default: u8DataMode = 0xf; } if (enmDataForm == VDREGIONDATAFORM_CDDA) u8TrackMode = 0x0; else u8TrackMode = 0x4; memset(pbBuf, '\0', 36); scsiH2BE_U16(pbBuf, 34); pbBuf[2] = uRegion + 1; /* track number (LSB) */ pbBuf[3] = 1; /* session number (LSB) */ pbBuf[5] = (0 << 5) | (0 << 4) | u8TrackMode; /* not damaged, primary copy, data track */ pbBuf[6] = (0 << 7) | (0 << 6) | (0 << 5) | (0 << 6) | u8DataMode; /* not reserved track, not blank, not packet writing, not fixed packet */ pbBuf[7] = (0 << 1) | (0 << 0); /* last recorded address not valid, next recordable address not valid */ scsiH2BE_U32(pbBuf + 8, (uint32_t)u64LbaStart); /* track start address is 0 */ scsiH2BE_U32(pbBuf + 24, (uint32_t)cBlocks); /* track size */ pbBuf[32] = 0; /* track number (MSB) */ pbBuf[33] = 0; /* session number (MSB) */ s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureListProfiles(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 3*4) return 0; scsiH2BE_U16(pbBuf, 0x0); /* feature 0: list of profiles supported */ pbBuf[2] = (0 << 2) | (1 << 1) | (1 << 0); /* version 0, persistent, current */ pbBuf[3] = 8; /* additional bytes for profiles */ /* The MMC-3 spec says that DVD-ROM read capability should be reported * before CD-ROM read capability. */ scsiH2BE_U16(pbBuf + 4, 0x10); /* profile: read-only DVD */ pbBuf[6] = (0 << 0); /* NOT current profile */ scsiH2BE_U16(pbBuf + 8, 0x08); /* profile: read only CD */ pbBuf[10] = (1 << 0); /* current profile */ return 3*4; /* Header + 2 profiles entries */ } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureCore(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 12) return 0; scsiH2BE_U16(pbBuf, 0x1); /* feature 0001h: Core Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 8; /* Additional length */ scsiH2BE_U16(pbBuf + 4, 0x00000002); /* Physical interface ATAPI. */ pbBuf[8] = RT_BIT(0); /* DBE */ /* Rest is reserved. */ return 12; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureMorphing(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 8) return 0; scsiH2BE_U16(pbBuf, 0x2); /* feature 0002h: Morphing Feature */ pbBuf[2] = (0x1 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ pbBuf[4] = RT_BIT(1) | 0x0; /* OCEvent | !ASYNC */ /* Rest is reserved. */ return 8; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureRemovableMedium(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 8) return 0; scsiH2BE_U16(pbBuf, 0x3); /* feature 0003h: Removable Medium Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ /* Tray type loading | Load | Eject | !Pvnt Jmpr | !DBML | Lock */ pbBuf[4] = (0x2 << 5) | RT_BIT(4) | RT_BIT(3) | (0x0 << 2) | (0x0 << 1) | RT_BIT(0); /* Rest is reserved. */ return 8; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureRandomReadable (PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 12) return 0; scsiH2BE_U16(pbBuf, 0x10); /* feature 0010h: Random Readable Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 8; /* Additional length */ scsiH2BE_U32(pbBuf + 4, 2048); /* Logical block size. */ scsiH2BE_U16(pbBuf + 8, 0x10); /* Blocking (0x10 for DVD, CD is not defined). */ pbBuf[10] = 0; /* PP not present */ /* Rest is reserved. */ return 12; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureCDRead(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 8) return 0; scsiH2BE_U16(pbBuf, 0x1e); /* feature 001Eh: CD Read Feature */ pbBuf[2] = (0x2 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 0; /* Additional length */ pbBuf[4] = (0x0 << 7) | (0x0 << 1) | 0x0; /* !DAP | !C2-Flags | !CD-Text. */ /* Rest is reserved. */ return 8; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeaturePowerManagement(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 4) return 0; scsiH2BE_U16(pbBuf, 0x100); /* feature 0100h: Power Management Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 0; /* Additional length */ return 4; } static DECLCALLBACK(uint32_t) atapiR3GetConfigurationFillFeatureTimeout(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf) { RT_NOREF(s); if (cbBuf < 8) return 0; scsiH2BE_U16(pbBuf, 0x105); /* feature 0105h: Timeout Feature */ pbBuf[2] = (0x0 << 2) | RT_BIT(1) | RT_BIT(0); /* Version | Persistent | Current */ pbBuf[3] = 4; /* Additional length */ pbBuf[4] = 0x0; /* !Group3 */ return 8; } /** * Callback to fill in the correct data for a feature. * * @returns Number of bytes written into the buffer. * @param s The ATA device state. * @param pbBuf The buffer to fill the data with. * @param cbBuf Size of the buffer. */ typedef DECLCALLBACK(uint32_t) FNATAPIR3FEATUREFILL(PATADEVSTATE s, uint8_t *pbBuf, size_t cbBuf); /** Pointer to a feature fill callback. */ typedef FNATAPIR3FEATUREFILL *PFNATAPIR3FEATUREFILL; /** * ATAPI feature descriptor. */ typedef struct ATAPIR3FEATDESC { /** The feature number. */ uint16_t u16Feat; /** The callback to fill in the correct data. */ PFNATAPIR3FEATUREFILL pfnFeatureFill; } ATAPIR3FEATDESC; /** * Array of known ATAPI feature descriptors. */ static const ATAPIR3FEATDESC s_aAtapiR3Features[] = { { 0x0000, atapiR3GetConfigurationFillFeatureListProfiles}, { 0x0001, atapiR3GetConfigurationFillFeatureCore}, { 0x0002, atapiR3GetConfigurationFillFeatureMorphing}, { 0x0003, atapiR3GetConfigurationFillFeatureRemovableMedium}, { 0x0010, atapiR3GetConfigurationFillFeatureRandomReadable}, { 0x001e, atapiR3GetConfigurationFillFeatureCDRead}, { 0x0100, atapiR3GetConfigurationFillFeaturePowerManagement}, { 0x0105, atapiR3GetConfigurationFillFeatureTimeout} }; /** * Sink/Source: ATAPI GET CONFIGURATION */ static bool atapiR3GetConfigurationSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint32_t const cbIOBuffer = RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE); uint8_t *pbBuf = s->abIOBuffer; uint32_t cbBuf = cbIOBuffer; uint32_t cbCopied = 0; uint16_t u16Sfn = scsiBE2H_U16(&s->abATAPICmd[2]); uint8_t u8Rt = s->abATAPICmd[1] & 0x03; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 80); /* Accept valid request types only. */ if (u8Rt == 3) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } memset(pbBuf, '\0', cbBuf); /** @todo implement switching between CD-ROM and DVD-ROM profile (the only * way to differentiate them right now is based on the image size). */ if (s->cTotalSectors) scsiH2BE_U16(pbBuf + 6, 0x08); /* current profile: read-only CD */ else scsiH2BE_U16(pbBuf + 6, 0x00); /* current profile: none -> no media */ cbBuf -= 8; pbBuf += 8; if (u8Rt == 0x2) { for (uint32_t i = 0; i < RT_ELEMENTS(s_aAtapiR3Features); i++) { if (s_aAtapiR3Features[i].u16Feat == u16Sfn) { cbCopied = s_aAtapiR3Features[i].pfnFeatureFill(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; break; } } } else { for (uint32_t i = 0; i < RT_ELEMENTS(s_aAtapiR3Features); i++) { if (s_aAtapiR3Features[i].u16Feat > u16Sfn) { cbCopied = s_aAtapiR3Features[i].pfnFeatureFill(s, pbBuf, cbBuf); cbBuf -= cbCopied; pbBuf += cbCopied; } } } /* Set data length now - the field is not included in the final length. */ scsiH2BE_U32(s->abIOBuffer, cbIOBuffer - cbBuf - 4); /* Other profiles we might want to add in the future: 0x40 (BD-ROM) and 0x50 (HDDVD-ROM) */ s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI GET EVENT STATUS NOTIFICATION */ static bool atapiR3GetEventStatusNotificationSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); if (!(s->abATAPICmd[1] & 1)) { /* no asynchronous operation supported */ atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } uint32_t OldStatus, NewStatus; do { OldStatus = ASMAtomicReadU32(&s->MediaEventStatus); NewStatus = ATA_EVENT_STATUS_UNCHANGED; switch (OldStatus) { case ATA_EVENT_STATUS_MEDIA_NEW: /* mount */ scsiH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x02; /* new medium */ pbBuf[5] = 0x02; /* medium present / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; case ATA_EVENT_STATUS_MEDIA_CHANGED: case ATA_EVENT_STATUS_MEDIA_REMOVED: /* umount */ scsiH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x03; /* media removal */ pbBuf[5] = 0x00; /* medium absent / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; if (OldStatus == ATA_EVENT_STATUS_MEDIA_CHANGED) NewStatus = ATA_EVENT_STATUS_MEDIA_NEW; break; case ATA_EVENT_STATUS_MEDIA_EJECT_REQUESTED: /* currently unused */ scsiH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x04; /* media */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x01; /* eject requested (eject button pressed) */ pbBuf[5] = 0x02; /* medium present / door closed */ pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; case ATA_EVENT_STATUS_UNCHANGED: default: scsiH2BE_U16(pbBuf + 0, 6); pbBuf[2] = 0x01; /* operational change request / notification */ pbBuf[3] = 0x5e; /* supported = busy|media|external|power|operational */ pbBuf[4] = 0x00; pbBuf[5] = 0x00; pbBuf[6] = 0x00; pbBuf[7] = 0x00; break; } } while (!ASMAtomicCmpXchgU32(&s->MediaEventStatus, NewStatus, OldStatus)); s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI INQUIRY */ static bool atapiR3InquirySS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 36); pbBuf[0] = 0x05; /* CD-ROM */ pbBuf[1] = 0x80; /* removable */ # if 1/*ndef VBOX*/ /** @todo implement MESN + AENC. (async notification on removal and stuff.) */ pbBuf[2] = 0x00; /* ISO */ pbBuf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ # else pbBuf[2] = 0x00; /* ISO */ pbBuf[3] = 0x91; /* format 1, MESN=1, AENC=9 ??? */ # endif pbBuf[4] = 31; /* additional length */ pbBuf[5] = 0; /* reserved */ pbBuf[6] = 0; /* reserved */ pbBuf[7] = 0; /* reserved */ scsiPadStr(pbBuf + 8, s->szInquiryVendorId, 8); scsiPadStr(pbBuf + 16, s->szInquiryProductId, 16); scsiPadStr(pbBuf + 32, s->szInquiryRevision, 4); s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI MODE SENSE ERROR RECOVERY */ static bool atapiR3ModeSenseErrorRecoverySS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 16); scsiH2BE_U16(&pbBuf[0], 16 + 6); pbBuf[2] = (uint8_t)s->MediaTrackType; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 0; pbBuf[6] = 0; pbBuf[7] = 0; pbBuf[8] = 0x01; pbBuf[9] = 0x06; pbBuf[10] = 0x00; /* Maximum error recovery */ pbBuf[11] = 0x05; /* 5 retries */ pbBuf[12] = 0x00; pbBuf[13] = 0x00; pbBuf[14] = 0x00; pbBuf[15] = 0x00; s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI MODE SENSE CD STATUS */ static bool atapiR3ModeSenseCDStatusSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 40); scsiH2BE_U16(&pbBuf[0], 38); pbBuf[2] = (uint8_t)s->MediaTrackType; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 0; pbBuf[6] = 0; pbBuf[7] = 0; pbBuf[8] = 0x2a; pbBuf[9] = 30; /* page length */ pbBuf[10] = 0x08; /* DVD-ROM read support */ pbBuf[11] = 0x00; /* no write support */ /* The following claims we support audio play. This is obviously false, * but the Linux generic CDROM support makes many features depend on this * capability. If it's not set, this causes many things to be disabled. */ pbBuf[12] = 0x71; /* multisession support, mode 2 form 1/2 support, audio play */ pbBuf[13] = 0x00; /* no subchannel reads supported */ pbBuf[14] = (1 << 0) | (1 << 3) | (1 << 5); /* lock supported, eject supported, tray type loading mechanism */ if (pDevR3->pDrvMount->pfnIsLocked(pDevR3->pDrvMount)) pbBuf[14] |= 1 << 1; /* report lock state */ pbBuf[15] = 0; /* no subchannel reads supported, no separate audio volume control, no changer etc. */ scsiH2BE_U16(&pbBuf[16], 5632); /* (obsolete) claim 32x speed support */ scsiH2BE_U16(&pbBuf[18], 2); /* number of audio volume levels */ scsiH2BE_U16(&pbBuf[20], RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE) / _1K); /* buffer size supported in Kbyte */ scsiH2BE_U16(&pbBuf[22], 5632); /* (obsolete) current read speed 32x */ pbBuf[24] = 0; /* reserved */ pbBuf[25] = 0; /* reserved for digital audio (see idx 15) */ scsiH2BE_U16(&pbBuf[26], 0); /* (obsolete) maximum write speed */ scsiH2BE_U16(&pbBuf[28], 0); /* (obsolete) current write speed */ scsiH2BE_U16(&pbBuf[30], 0); /* copy management revision supported 0=no CSS */ pbBuf[32] = 0; /* reserved */ pbBuf[33] = 0; /* reserved */ pbBuf[34] = 0; /* reserved */ pbBuf[35] = 1; /* rotation control CAV */ scsiH2BE_U16(&pbBuf[36], 0); /* current write speed */ scsiH2BE_U16(&pbBuf[38], 0); /* number of write speed performance descriptors */ s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI REQUEST SENSE */ static bool atapiR3RequestSenseSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); memset(pbBuf, '\0', RT_MIN(s->cbElementaryTransfer, sizeof(s->abIOBuffer))); AssertCompile(sizeof(s->abIOBuffer) >= sizeof(s->abATAPISense)); memcpy(pbBuf, s->abATAPISense, RT_MIN(s->cbElementaryTransfer, sizeof(s->abATAPISense))); s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI MECHANISM STATUS */ static bool atapiR3MechanismStatusSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 8); scsiH2BE_U16(pbBuf, 0); /* no current LBA */ pbBuf[2] = 0; pbBuf[3] = 0; pbBuf[4] = 0; pbBuf[5] = 1; scsiH2BE_U16(pbBuf + 6, 0); s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI READ TOC NORMAL */ static bool atapiR3ReadTOCNormalSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; uint8_t *q; uint8_t iStartTrack; bool fMSF; uint32_t cbSize; RT_NOREF(pDevIns); /* Track fields are 8-bit and 1-based, so cut the track count at 255, avoiding any potentially buffer overflow issues below. */ uint32_t cTracks = pDevR3->pDrvMedia->pfnGetRegionCount(pDevR3->pDrvMedia); AssertStmt(cTracks <= UINT8_MAX, cTracks = UINT8_MAX); AssertCompile(sizeof(s->abIOBuffer) >= 2 + 256 + 8); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); fMSF = (s->abATAPICmd[1] >> 1) & 1; iStartTrack = s->abATAPICmd[6]; if (iStartTrack == 0) iStartTrack = 1; if (iStartTrack > cTracks && iStartTrack != 0xaa) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return false; } q = pbBuf + 2; *q++ = iStartTrack; /* first track number */ *q++ = cTracks; /* last track number */ for (uint32_t iTrack = iStartTrack; iTrack <= cTracks; iTrack++) { uint64_t uLbaStart = 0; VDREGIONDATAFORM enmDataForm = VDREGIONDATAFORM_MODE1_2048; int rc = pDevR3->pDrvMedia->pfnQueryRegionProperties(pDevR3->pDrvMedia, iTrack - 1, &uLbaStart, NULL, NULL, &enmDataForm); AssertRC(rc); *q++ = 0; /* reserved */ if (enmDataForm == VDREGIONDATAFORM_CDDA) *q++ = 0x10; /* ADR, control */ else *q++ = 0x14; /* ADR, control */ *q++ = (uint8_t)iTrack; /* track number */ *q++ = 0; /* reserved */ if (fMSF) { *q++ = 0; /* reserved */ scsiLBA2MSF(q, (uint32_t)uLbaStart); q += 3; } else { /* sector 0 */ scsiH2BE_U32(q, (uint32_t)uLbaStart); q += 4; } } /* lead out track */ *q++ = 0; /* reserved */ *q++ = 0x14; /* ADR, control */ *q++ = 0xaa; /* track number */ *q++ = 0; /* reserved */ /* Query start and length of last track to get the start of the lead out track. */ uint64_t uLbaStart = 0; uint64_t cBlocks = 0; int rc = pDevR3->pDrvMedia->pfnQueryRegionProperties(pDevR3->pDrvMedia, cTracks - 1, &uLbaStart, &cBlocks, NULL, NULL); AssertRC(rc); uLbaStart += cBlocks; if (fMSF) { *q++ = 0; /* reserved */ scsiLBA2MSF(q, (uint32_t)uLbaStart); q += 3; } else { scsiH2BE_U32(q, (uint32_t)uLbaStart); q += 4; } cbSize = q - pbBuf; scsiH2BE_U16(pbBuf, cbSize - 2); if (cbSize < s->cbTotalTransfer) s->cbTotalTransfer = cbSize; s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI READ TOC MULTI */ static bool atapiR3ReadTOCMultiSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; bool fMSF; RT_NOREF(pDevIns); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); Assert(s->cbElementaryTransfer <= 12); fMSF = (s->abATAPICmd[1] >> 1) & 1; /* multi session: only a single session defined */ /** @todo double-check this stuff against what a real drive says for a CD-ROM (not a CD-R) * with only a single data session. Maybe solve the problem with "cdrdao read-toc" not being * able to figure out whether numbers are in BCD or hex. */ memset(pbBuf, 0, 12); pbBuf[1] = 0x0a; pbBuf[2] = 0x01; pbBuf[3] = 0x01; VDREGIONDATAFORM enmDataForm = VDREGIONDATAFORM_MODE1_2048; int rc = pDevR3->pDrvMedia->pfnQueryRegionProperties(pDevR3->pDrvMedia, 0, NULL, NULL, NULL, &enmDataForm); AssertRC(rc); if (enmDataForm == VDREGIONDATAFORM_CDDA) pbBuf[5] = 0x10; /* ADR, control */ else pbBuf[5] = 0x14; /* ADR, control */ pbBuf[6] = 1; /* first track in last complete session */ if (fMSF) { pbBuf[8] = 0; /* reserved */ scsiLBA2MSF(&pbBuf[9], 0); } else { /* sector 0 */ scsiH2BE_U32(pbBuf + 8, 0); } s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } /** * Sink/Source: ATAPI READ TOC RAW */ static bool atapiR3ReadTOCRawSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { uint8_t *pbBuf = s->abIOBuffer; uint8_t *q; uint8_t iStartTrack; bool fMSF; uint32_t cbSize; RT_NOREF(pDevIns, pDevR3); Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); fMSF = (s->abATAPICmd[1] >> 1) & 1; iStartTrack = s->abATAPICmd[6]; q = pbBuf + 2; *q++ = 1; /* first session */ *q++ = 1; /* last session */ *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa0; /* first track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* first track */ *q++ = 0x00; /* disk type CD-DA or CD data */ *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa1; /* last track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* last track */ *q++ = 0; *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa2; /* lead-out */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ scsiLBA2MSF(q, s->cTotalSectors); q += 3; } else { scsiH2BE_U32(q, s->cTotalSectors); q += 4; } *q++ = 1; /* session number */ *q++ = 0x14; /* ADR, control */ *q++ = 0; /* track number */ *q++ = 1; /* point */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ scsiLBA2MSF(q, 0); q += 3; } else { /* sector 0 */ scsiH2BE_U32(q, 0); q += 4; } cbSize = q - pbBuf; scsiH2BE_U16(pbBuf, cbSize - 2); if (cbSize < s->cbTotalTransfer) s->cbTotalTransfer = cbSize; s->iSourceSink = ATAFN_SS_NULL; atapiR3CmdOK(pCtl, s); return false; } static void atapiR3ParseCmdVirtualATAPI(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { const uint8_t *pbPacket = s->abATAPICmd; uint32_t cbMax; uint32_t cSectors, iATAPILBA; switch (pbPacket[0]) { case SCSI_TEST_UNIT_READY: if (s->cNotifiedMediaChange > 0) { if (s->cNotifiedMediaChange-- > 2) atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); else atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ } else if (pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) atapiR3CmdOK(pCtl, s); else atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_GET_EVENT_STATUS_NOTIFICATION: cbMax = scsiBE2H_U16(pbPacket + 7); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 8), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, true); break; case SCSI_MODE_SENSE_6: { uint8_t uPageControl, uPageCode; cbMax = pbPacket[4]; uPageControl = pbPacket[2] >> 6; uPageCode = pbPacket[2] & 0x3f; switch (uPageControl) { case SCSI_PAGECONTROL_CURRENT: switch (uPageCode) { case SCSI_MODEPAGE_ERROR_RECOVERY: ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 16), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, true); break; case SCSI_MODEPAGE_CD_STATUS: ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 40), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, true); break; default: goto error_cmd; } break; case SCSI_PAGECONTROL_CHANGEABLE: goto error_cmd; case SCSI_PAGECONTROL_DEFAULT: goto error_cmd; default: case SCSI_PAGECONTROL_SAVED: atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED); break; } break; } case SCSI_MODE_SENSE_10: { uint8_t uPageControl, uPageCode; cbMax = scsiBE2H_U16(pbPacket + 7); uPageControl = pbPacket[2] >> 6; uPageCode = pbPacket[2] & 0x3f; switch (uPageControl) { case SCSI_PAGECONTROL_CURRENT: switch (uPageCode) { case SCSI_MODEPAGE_ERROR_RECOVERY: ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 16), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, true); break; case SCSI_MODEPAGE_CD_STATUS: ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 40), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, true); break; default: goto error_cmd; } break; case SCSI_PAGECONTROL_CHANGEABLE: goto error_cmd; case SCSI_PAGECONTROL_DEFAULT: goto error_cmd; default: case SCSI_PAGECONTROL_SAVED: atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED); break; } break; } case SCSI_REQUEST_SENSE: cbMax = pbPacket[4]; ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 18), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_REQUEST_SENSE, true); break; case SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL: if (pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { if (pbPacket[4] & 1) pDevR3->pDrvMount->pfnLock(pDevR3->pDrvMount); else pDevR3->pDrvMount->pfnUnlock(pDevR3->pDrvMount); atapiR3CmdOK(pCtl, s); } else atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_READ_10: case SCSI_READ_12: { if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } if (pbPacket[0] == SCSI_READ_10) cSectors = scsiBE2H_U16(pbPacket + 7); else cSectors = scsiBE2H_U32(pbPacket + 6); iATAPILBA = scsiBE2H_U32(pbPacket + 2); if (cSectors == 0) { atapiR3CmdOK(pCtl, s); break; } /* Check that the sector size is valid. */ VDREGIONDATAFORM enmDataForm = VDREGIONDATAFORM_INVALID; int rc = pDevR3->pDrvMedia->pfnQueryRegionPropertiesForLba(pDevR3->pDrvMedia, iATAPILBA, NULL, NULL, NULL, &enmDataForm); if (RT_UNLIKELY( rc == VERR_NOT_FOUND || ((uint64_t)iATAPILBA + cSectors > s->cTotalSectors))) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (READ)\n", s->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } else if ( enmDataForm != VDREGIONDATAFORM_MODE1_2048 && enmDataForm != VDREGIONDATAFORM_MODE1_2352 && enmDataForm != VDREGIONDATAFORM_MODE2_2336 && enmDataForm != VDREGIONDATAFORM_MODE2_2352 && enmDataForm != VDREGIONDATAFORM_RAW) { uint8_t abATAPISense[ATAPI_SENSE_SIZE]; RT_ZERO(abATAPISense); abATAPISense[0] = 0x70 | (1 << 7); abATAPISense[2] = (SCSI_SENSE_ILLEGAL_REQUEST & 0x0f) | SCSI_SENSE_FLAG_ILI; scsiH2BE_U32(&abATAPISense[3], iATAPILBA); abATAPISense[7] = 10; abATAPISense[12] = SCSI_ASC_ILLEGAL_MODE_FOR_THIS_TRACK; atapiR3CmdError(pCtl, s, &abATAPISense[0], sizeof(abATAPISense)); break; } atapiR3ReadSectors(pDevIns, pCtl, s, iATAPILBA, cSectors, 2048); break; } case SCSI_READ_CD_MSF: case SCSI_READ_CD: { if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } if ((pbPacket[10] & 0x7) != 0) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } if (pbPacket[0] == SCSI_READ_CD) { cSectors = (pbPacket[6] << 16) | (pbPacket[7] << 8) | pbPacket[8]; iATAPILBA = scsiBE2H_U32(pbPacket + 2); } else /* READ CD MSF */ { iATAPILBA = scsiMSF2LBA(pbPacket + 3); if (iATAPILBA > scsiMSF2LBA(pbPacket + 6)) { Log2(("Start MSF %02u:%02u:%02u > end MSF %02u:%02u:%02u!\n", *(pbPacket + 3), *(pbPacket + 4), *(pbPacket + 5), *(pbPacket + 6), *(pbPacket + 7), *(pbPacket + 8))); atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } cSectors = scsiMSF2LBA(pbPacket + 6) - iATAPILBA; Log2(("Start MSF %02u:%02u:%02u -> LBA %u\n", *(pbPacket + 3), *(pbPacket + 4), *(pbPacket + 5), iATAPILBA)); Log2(("End MSF %02u:%02u:%02u -> %u sectors\n", *(pbPacket + 6), *(pbPacket + 7), *(pbPacket + 8), cSectors)); } if (cSectors == 0) { atapiR3CmdOK(pCtl, s); break; } if ((uint64_t)iATAPILBA + cSectors > s->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (READ CD)\n", s->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } /* * If the LBA is in an audio track we are required to ignore pretty much all * of the channel selection values (except 0x00) and map everything to 0x10 * which means read user data with a sector size of 2352 bytes. * * (MMC-6 chapter 6.19.2.6) */ uint8_t uChnSel = pbPacket[9] & 0xf8; VDREGIONDATAFORM enmDataForm; int rc = pDevR3->pDrvMedia->pfnQueryRegionPropertiesForLba(pDevR3->pDrvMedia, iATAPILBA, NULL, NULL, NULL, &enmDataForm); AssertRC(rc); if (enmDataForm == VDREGIONDATAFORM_CDDA) { if (uChnSel == 0) { /* nothing */ atapiR3CmdOK(pCtl, s); } else atapiR3ReadSectors(pDevIns, pCtl, s, iATAPILBA, cSectors, 2352); } else { switch (uChnSel) { case 0x00: /* nothing */ atapiR3CmdOK(pCtl, s); break; case 0x10: /* normal read */ atapiR3ReadSectors(pDevIns, pCtl, s, iATAPILBA, cSectors, 2048); break; case 0xf8: /* read all data */ atapiR3ReadSectors(pDevIns, pCtl, s, iATAPILBA, cSectors, 2352); break; default: LogRel(("PIIX3 ATA: LUN#%d: CD-ROM sector format not supported (%#x)\n", s->iLUN, pbPacket[9] & 0xf8)); atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } } break; } case SCSI_SEEK_10: { if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } iATAPILBA = scsiBE2H_U32(pbPacket + 2); if (iATAPILBA > s->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on seeking to places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("PIIX3 ATA: LUN#%d: CD-ROM block number %Ld invalid (SEEK)\n", s->iLUN, (uint64_t)iATAPILBA)); uLastLogTS = RTTimeMilliTS(); } atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } atapiR3CmdOK(pCtl, s); ataSetStatus(pCtl, s, ATA_STAT_SEEK); /* Linux expects this. */ break; } case SCSI_START_STOP_UNIT: { int rc = VINF_SUCCESS; switch (pbPacket[4] & 3) { case 0: /* 00 - Stop motor */ case 1: /* 01 - Start motor */ break; case 2: /* 10 - Eject media */ { /* This must be done from EMT. */ PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); ataR3LockLeave(pDevIns, pCtl); rc = VMR3ReqPriorityCallWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)pDevR3->pDrvMount->pfnUnmount, 3, pDevR3->pDrvMount, false /*=fForce*/, true /*=fEject*/); Assert(RT_SUCCESS(rc) || rc == VERR_PDM_MEDIA_LOCKED || rc == VERR_PDM_MEDIA_NOT_MOUNTED); if (RT_SUCCESS(rc) && pThisCC->pMediaNotify) { rc = VMR3ReqCallNoWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)pThisCC->pMediaNotify->pfnEjected, 2, pThisCC->pMediaNotify, s->iLUN); AssertRC(rc); } ataR3LockEnter(pDevIns, pCtl); break; } case 3: /* 11 - Load media */ /** @todo rc = pDevR3->pDrvMount->pfnLoadMedia(pDevR3->pDrvMount) */ break; } if (RT_SUCCESS(rc)) atapiR3CmdOK(pCtl, s); else atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED); break; } case SCSI_MECHANISM_STATUS: { cbMax = scsiBE2H_U16(pbPacket + 8); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 8), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_MECHANISM_STATUS, true); break; } case SCSI_READ_TOC_PMA_ATIP: { uint8_t format; if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = scsiBE2H_U16(pbPacket + 7); /* SCSI MMC-3 spec says format is at offset 2 (lower 4 bits), * but Linux kernel uses offset 9 (topmost 2 bits). Hope that * the other field is clear... */ format = (pbPacket[2] & 0xf) | (pbPacket[9] >> 6); switch (format) { case 0: ataR3StartTransfer(pDevIns, pCtl, s, cbMax, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_NORMAL, true); break; case 1: ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 12), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_MULTI, true); break; case 2: ataR3StartTransfer(pDevIns, pCtl, s, cbMax, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TOC_RAW, true); break; default: error_cmd: atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } break; } case SCSI_READ_CAPACITY: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } ataR3StartTransfer(pDevIns, pCtl, s, 8, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_CAPACITY, true); break; case SCSI_READ_DISC_INFORMATION: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = scsiBE2H_U16(pbPacket + 7); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 34), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_DISC_INFORMATION, true); break; case SCSI_READ_TRACK_INFORMATION: if (s->cNotifiedMediaChange > 0) { s->cNotifiedMediaChange-- ; atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pDevR3->pDrvMount->pfnIsMounted(pDevR3->pDrvMount)) { atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = scsiBE2H_U16(pbPacket + 7); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 36), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION, true); break; case SCSI_GET_CONFIGURATION: /* No media change stuff here, it can confuse Linux guests. */ cbMax = scsiBE2H_U16(pbPacket + 7); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 80), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_CONFIGURATION, true); break; case SCSI_INQUIRY: cbMax = scsiBE2H_U16(pbPacket + 3); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 36), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_INQUIRY, true); break; case SCSI_READ_DVD_STRUCTURE: { cbMax = scsiBE2H_U16(pbPacket + 8); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbMax, 4), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_READ_DVD_STRUCTURE, true); break; } default: atapiR3CmdErrorSimple(pCtl, s, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); break; } } /* * Parse ATAPI commands, passing them directly to the CD/DVD drive. */ static void atapiR3ParseCmdPassthrough(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { const uint8_t *pbPacket = &s->abATAPICmd[0]; /* Some cases we have to handle here. */ if ( pbPacket[0] == SCSI_GET_EVENT_STATUS_NOTIFICATION && ASMAtomicReadU32(&s->MediaEventStatus) != ATA_EVENT_STATUS_UNCHANGED) { uint32_t cbTransfer = scsiBE2H_U16(pbPacket + 7); ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(cbTransfer, 8), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_GET_EVENT_STATUS_NOTIFICATION, true); } else if ( pbPacket[0] == SCSI_REQUEST_SENSE && (s->abATAPISense[2] & 0x0f) != SCSI_SENSE_NONE) ataR3StartTransfer(pDevIns, pCtl, s, RT_MIN(pbPacket[4], 18), PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_ATAPI_CMD, ATAFN_SS_ATAPI_REQUEST_SENSE, true); else { size_t cbBuf = 0; size_t cbATAPISector = 0; size_t cbTransfer = 0; PDMMEDIATXDIR uTxDir = PDMMEDIATXDIR_NONE; uint8_t u8ScsiSts = SCSI_STATUS_OK; if (pbPacket[0] == SCSI_FORMAT_UNIT || pbPacket[0] == SCSI_GET_PERFORMANCE) cbBuf = s->uATARegLCyl | (s->uATARegHCyl << 8); /* use ATAPI transfer length */ bool fPassthrough = ATAPIPassthroughParseCdb(pbPacket, sizeof(s->abATAPICmd), cbBuf, pDevR3->pTrackList, &s->abATAPISense[0], sizeof(s->abATAPISense), &uTxDir, &cbTransfer, &cbATAPISector, &u8ScsiSts); if (fPassthrough) { s->cbATAPISector = (uint32_t)cbATAPISector; Assert(s->cbATAPISector == (uint32_t)cbATAPISector); Assert(cbTransfer == (uint32_t)cbTransfer); /* * Send a command to the drive, passing data in/out as required. * Commands which exceed the I/O buffer size are split below * or aborted if splitting is not implemented. */ Log2(("ATAPI PT: max size %d\n", cbTransfer)); if (cbTransfer == 0) uTxDir = PDMMEDIATXDIR_NONE; ataR3StartTransfer(pDevIns, pCtl, s, (uint32_t)cbTransfer, uTxDir, ATAFN_BT_ATAPI_PASSTHROUGH_CMD, ATAFN_SS_ATAPI_PASSTHROUGH, true); } else if (u8ScsiSts == SCSI_STATUS_CHECK_CONDITION) { /* Sense data is already set, end the request and notify the guest. */ Log(("%s: sense=%#x (%s) asc=%#x ascq=%#x (%s)\n", __FUNCTION__, s->abATAPISense[2] & 0x0f, SCSISenseText(s->abATAPISense[2] & 0x0f), s->abATAPISense[12], s->abATAPISense[13], SCSISenseExtText(s->abATAPISense[12], s->abATAPISense[13]))); s->uATARegError = s->abATAPISense[2] << 4; ataSetStatusValue(pCtl, s, ATA_STAT_READY | ATA_STAT_ERR); s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->cbAtapiPassthroughTransfer = 0; s->iIOBufferCur = 0; s->iIOBufferEnd = 0; s->uTxDir = PDMMEDIATXDIR_NONE; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } else if (u8ScsiSts == SCSI_STATUS_OK) atapiR3CmdOK(pCtl, s); } } static void atapiR3ParseCmd(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { const uint8_t *pbPacket; pbPacket = s->abATAPICmd; # ifdef DEBUG Log(("%s: LUN#%d DMA=%d CMD=%#04x \"%s\"\n", __FUNCTION__, s->iLUN, s->fDMA, pbPacket[0], SCSICmdText(pbPacket[0]))); # else /* !DEBUG */ Log(("%s: LUN#%d DMA=%d CMD=%#04x\n", __FUNCTION__, s->iLUN, s->fDMA, pbPacket[0])); # endif /* !DEBUG */ Log2(("%s: limit=%#x packet: %.*Rhxs\n", __FUNCTION__, s->uATARegLCyl | (s->uATARegHCyl << 8), ATAPI_PACKET_SIZE, pbPacket)); if (s->fATAPIPassthrough) atapiR3ParseCmdPassthrough(pDevIns, pCtl, s, pDevR3); else atapiR3ParseCmdVirtualATAPI(pDevIns, pCtl, s, pDevR3); } /** * Sink/Source: PACKET */ static bool ataR3PacketSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { s->fDMA = !!(s->uATARegFeature & 1); memcpy(s->abATAPICmd, s->abIOBuffer, ATAPI_PACKET_SIZE); s->uTxDir = PDMMEDIATXDIR_NONE; s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->cbAtapiPassthroughTransfer = 0; atapiR3ParseCmd(pDevIns, pCtl, s, pDevR3); return false; } /** * SCSI_GET_EVENT_STATUS_NOTIFICATION should return "medium removed" event * from now on, regardless if there was a medium inserted or not. */ static void ataR3MediumRemoved(PATADEVSTATE s) { ASMAtomicWriteU32(&s->MediaEventStatus, ATA_EVENT_STATUS_MEDIA_REMOVED); } /** * SCSI_GET_EVENT_STATUS_NOTIFICATION should return "medium inserted". If * there was already a medium inserted, don't forget to send the "medium * removed" event first. */ static void ataR3MediumInserted(PATADEVSTATE s) { uint32_t OldStatus, NewStatus; do { OldStatus = ASMAtomicReadU32(&s->MediaEventStatus); switch (OldStatus) { case ATA_EVENT_STATUS_MEDIA_CHANGED: case ATA_EVENT_STATUS_MEDIA_REMOVED: /* no change, we will send "medium removed" + "medium inserted" */ NewStatus = ATA_EVENT_STATUS_MEDIA_CHANGED; break; default: NewStatus = ATA_EVENT_STATUS_MEDIA_NEW; break; } } while (!ASMAtomicCmpXchgU32(&s->MediaEventStatus, NewStatus, OldStatus)); } /** * @interface_method_impl{PDMIMOUNTNOTIFY,pfnMountNotify} */ static DECLCALLBACK(void) ataR3MountNotify(PPDMIMOUNTNOTIFY pInterface) { PATADEVSTATER3 pIfR3 = RT_FROM_MEMBER(pInterface, ATADEVSTATER3, IMountNotify); PATASTATE pThis = PDMDEVINS_2_DATA(pIfR3->pDevIns, PATASTATE); PATADEVSTATE pIf = &RT_SAFE_SUBSCRIPT(RT_SAFE_SUBSCRIPT(pThis->aCts, pIfR3->iCtl).aIfs, pIfR3->iDev); Log(("%s: changing LUN#%d\n", __FUNCTION__, pIfR3->iLUN)); /* Ignore the call if we're called while being attached. */ if (!pIfR3->pDrvMedia) return; uint32_t cRegions = pIfR3->pDrvMedia->pfnGetRegionCount(pIfR3->pDrvMedia); for (uint32_t i = 0; i < cRegions; i++) { uint64_t cBlocks = 0; int rc = pIfR3->pDrvMedia->pfnQueryRegionProperties(pIfR3->pDrvMedia, i, NULL, &cBlocks, NULL, NULL); AssertRC(rc); pIf->cTotalSectors += cBlocks; } LogRel(("PIIX3 ATA: LUN#%d: CD/DVD, total number of sectors %Ld, passthrough unchanged\n", pIf->iLUN, pIf->cTotalSectors)); /* Report media changed in TEST UNIT and other (probably incorrect) places. */ if (pIf->cNotifiedMediaChange < 2) pIf->cNotifiedMediaChange = 1; ataR3MediumInserted(pIf); ataR3MediumTypeSet(pIf, ATA_MEDIA_TYPE_UNKNOWN); } /** * @interface_method_impl{PDMIMOUNTNOTIFY,pfnUnmountNotify} */ static DECLCALLBACK(void) ataR3UnmountNotify(PPDMIMOUNTNOTIFY pInterface) { PATADEVSTATER3 pIfR3 = RT_FROM_MEMBER(pInterface, ATADEVSTATER3, IMountNotify); PATASTATE pThis = PDMDEVINS_2_DATA(pIfR3->pDevIns, PATASTATE); PATADEVSTATE pIf = &RT_SAFE_SUBSCRIPT(RT_SAFE_SUBSCRIPT(pThis->aCts, pIfR3->iCtl).aIfs, pIfR3->iDev); Log(("%s:\n", __FUNCTION__)); pIf->cTotalSectors = 0; /* * Whatever I do, XP will not use the GET MEDIA STATUS nor the EVENT stuff. * However, it will respond to TEST UNIT with a 0x6 0x28 (media changed) sense code. * So, we'll give it 4 TEST UNIT command to catch up, two which the media is not * present and 2 in which it is changed. */ pIf->cNotifiedMediaChange = 1; ataR3MediumRemoved(pIf); ataR3MediumTypeSet(pIf, ATA_MEDIA_NO_DISC); } /** * Begin Transfer: PACKET */ static void ataR3PacketBT(PATACONTROLLER pCtl, PATADEVSTATE s) { s->cbElementaryTransfer = s->cbTotalTransfer; s->cbAtapiPassthroughTransfer = s->cbTotalTransfer; s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_CD; Log2(("%s: interrupt reason %#04x\n", __FUNCTION__, s->uATARegNSector)); ataSetStatusValue(pCtl, s, ATA_STAT_READY); } static void ataR3ResetDevice(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s) { s->cMultSectors = ATA_MAX_MULT_SECTORS; s->cNotifiedMediaChange = 0; ASMAtomicWriteU32(&s->MediaEventStatus, ATA_EVENT_STATUS_UNCHANGED); ASMAtomicWriteU32(&s->MediaTrackType, ATA_MEDIA_TYPE_UNKNOWN); ataUnsetIRQ(pDevIns, pCtl, s); s->uATARegSelect = 0x20; ataSetStatusValue(pCtl, s, ATA_STAT_READY); ataR3SetSignature(s); s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->cbAtapiPassthroughTransfer = 0; s->iIOBufferPIODataStart = 0; s->iIOBufferPIODataEnd = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; s->fDMA = false; s->fATAPITransfer = false; s->uATATransferMode = ATA_MODE_UDMA | 2; /* PIIX3 supports only up to UDMA2 */ s->uATARegFeature = 0; } static void ataR3DeviceDiag(PATACONTROLLER pCtl, PATADEVSTATE s) { ataR3SetSignature(s); if (s->fATAPI) ataSetStatusValue(pCtl, s, 0); /* NOTE: READY is _not_ set */ else ataSetStatusValue(pCtl, s, ATA_STAT_READY | ATA_STAT_SEEK); s->uATARegError = 0x01; } /** * Sink/Source: EXECUTE DEVICE DIAGNOTIC */ static bool ataR3ExecuteDeviceDiagnosticSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { RT_NOREF(pDevIns, s, pDevR3); /* EXECUTE DEVICE DIAGNOSTIC is a very special command which always * gets executed, regardless of which device is selected. As a side * effect, it always completes with device 0 selected. */ for (uint32_t i = 0; i < RT_ELEMENTS(pCtl->aIfs); i++) ataR3DeviceDiag(pCtl, &pCtl->aIfs[i]); LogRel(("ATA: LUN#%d: EXECUTE DEVICE DIAGNOSTIC, status %02X\n", s->iLUN, s->uATARegStatus)); pCtl->iSelectedIf = 0; return false; } /** * Sink/Source: INITIALIZE DEVICE PARAMETERS */ static bool ataR3InitDevParmSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { RT_NOREF(pDevR3); LogFlowFunc(("\n")); LogRel(("ATA: LUN#%d: INITIALIZE DEVICE PARAMETERS: %u logical sectors, %u heads\n", s->iLUN, s->uATARegNSector, s->uATARegSelect & 0x0f)); ataR3LockLeave(pDevIns, pCtl); RTThreadSleep(pCtl->msDelayIRQ); ataR3LockEnter(pDevIns, pCtl); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); return false; } /** * Sink/Source: RECALIBRATE */ static bool ataR3RecalibrateSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { RT_NOREF(pDevR3); LogFlowFunc(("\n")); ataR3LockLeave(pDevIns, pCtl); RTThreadSleep(pCtl->msDelayIRQ); ataR3LockEnter(pDevIns, pCtl); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); return false; } static int ataR3TrimSectors(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3, uint64_t u64Sector, uint32_t cSectors, bool *pfRedo) { RTRANGE TrimRange; int rc; ataR3LockLeave(pDevIns, pCtl); TrimRange.offStart = u64Sector * s->cbSector; TrimRange.cbRange = cSectors * s->cbSector; s->Led.Asserted.s.fWriting = s->Led.Actual.s.fWriting = 1; rc = pDevR3->pDrvMedia->pfnDiscard(pDevR3->pDrvMedia, &TrimRange, 1); s->Led.Actual.s.fWriting = 0; if (RT_SUCCESS(rc)) *pfRedo = false; else *pfRedo = ataR3IsRedoSetWarning(pDevIns, pCtl, rc); ataR3LockEnter(pDevIns, pCtl); return rc; } /** * Sink/Source: TRIM */ static bool ataR3TrimSS(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3) { int rc = VERR_GENERAL_FAILURE; uint32_t cRangesMax; uint64_t *pu64Range = (uint64_t *)&s->abIOBuffer[0]; bool fRedo = false; cRangesMax = RT_MIN(s->cbElementaryTransfer, sizeof(s->abIOBuffer)) / sizeof(uint64_t); Assert(cRangesMax); while (cRangesMax-- > 0) { if (ATA_RANGE_LENGTH_GET(*pu64Range) == 0) break; rc = ataR3TrimSectors(pDevIns, pCtl, s, pDevR3, *pu64Range & ATA_RANGE_LBA_MASK, ATA_RANGE_LENGTH_GET(*pu64Range), &fRedo); if (RT_FAILURE(rc)) break; pu64Range++; } if (RT_SUCCESS(rc)) { s->iSourceSink = ATAFN_SS_NULL; ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); } else { if (fRedo) return fRedo; if (s->cErrors++ < MAX_LOG_REL_ERRORS) LogRel(("PIIX3 ATA: LUN#%d: disk trim error (rc=%Rrc iSector=%#RX64 cSectors=%#RX32)\n", s->iLUN, rc, *pu64Range & ATA_RANGE_LBA_MASK, ATA_RANGE_LENGTH_GET(*pu64Range))); /* * Check if we got interrupted. We don't need to set status variables * because the request was aborted. */ if (rc != VERR_INTERRUPTED) ataR3CmdError(pCtl, s, ID_ERR); } return false; } static void ataR3ParseCmd(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s, PATADEVSTATER3 pDevR3, uint8_t cmd) { # ifdef DEBUG Log(("%s: LUN#%d CMD=%#04x \"%s\"\n", __FUNCTION__, s->iLUN, cmd, ATACmdText(cmd))); # else /* !DEBUG */ Log(("%s: LUN#%d CMD=%#04x\n", __FUNCTION__, s->iLUN, cmd)); # endif /* !DEBUG */ s->fLBA48 = false; s->fDMA = false; if (cmd == ATA_IDLE_IMMEDIATE) { /* Detect Linux timeout recovery, first tries IDLE IMMEDIATE (which * would overwrite the failing command unfortunately), then RESET. */ int32_t uCmdWait = -1; uint64_t uNow = RTTimeNanoTS(); if (s->u64CmdTS) uCmdWait = (uNow - s->u64CmdTS) / 1000; LogRel(("PIIX3 ATA: LUN#%d: IDLE IMMEDIATE, CmdIf=%#04x (%d usec ago)\n", s->iLUN, s->uATARegCommand, uCmdWait)); } s->uATARegCommand = cmd; switch (cmd) { case ATA_IDENTIFY_DEVICE: if (pDevR3->pDrvMedia && !s->fATAPI) ataR3StartTransfer(pDevIns, pCtl, s, 512, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_NULL, ATAFN_SS_IDENTIFY, false); else { if (s->fATAPI) ataR3SetSignature(s); ataR3CmdError(pCtl, s, ABRT_ERR); ataUnsetStatus(pCtl, s, ATA_STAT_READY); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ } break; case ATA_RECALIBRATE: if (s->fATAPI) goto abort_cmd; ataR3StartTransfer(pDevIns, pCtl, s, 0, PDMMEDIATXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_RECALIBRATE, false); break; case ATA_INITIALIZE_DEVICE_PARAMETERS: if (s->fATAPI) goto abort_cmd; ataR3StartTransfer(pDevIns, pCtl, s, 0, PDMMEDIATXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_INITIALIZE_DEVICE_PARAMETERS, false); break; case ATA_SET_MULTIPLE_MODE: if ( s->uATARegNSector != 0 && ( s->uATARegNSector > ATA_MAX_MULT_SECTORS || (s->uATARegNSector & (s->uATARegNSector - 1)) != 0)) { ataR3CmdError(pCtl, s, ABRT_ERR); } else { Log2(("%s: set multi sector count to %d\n", __FUNCTION__, s->uATARegNSector)); s->cMultSectors = s->uATARegNSector; ataR3CmdOK(pCtl, s, 0); } ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_VERIFY_SECTORS_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_READ_VERIFY_SECTORS: case ATA_READ_VERIFY_SECTORS_WITHOUT_RETRIES: /* do sector number check ? */ ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_SECTORS_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_READ_SECTORS: case ATA_READ_SECTORS_WITHOUT_RETRIES: if (!pDevR3->pDrvMedia || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = 1; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_SECTORS_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_WRITE_SECTORS: case ATA_WRITE_SECTORS_WITHOUT_RETRIES: if (!pDevR3->pDrvMedia || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = 1; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_MULTIPLE_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_READ_MULTIPLE: if (!pDevR3->pDrvMedia || !s->cMultSectors || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = s->cMultSectors; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_MULTIPLE_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_WRITE_MULTIPLE: if (!pDevR3->pDrvMedia || !s->cMultSectors || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = s->cMultSectors; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_DMA_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_READ_DMA: case ATA_READ_DMA_WITHOUT_RETRIES: if (!pDevR3->pDrvMedia || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = ATA_MAX_MULT_SECTORS; s->fDMA = true; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_READ_SECTORS, false); break; case ATA_WRITE_DMA_EXT: s->fLBA48 = true; RT_FALL_THRU(); case ATA_WRITE_DMA: case ATA_WRITE_DMA_WITHOUT_RETRIES: if (!pDevR3->pDrvMedia || s->fATAPI) goto abort_cmd; s->cSectorsPerIRQ = ATA_MAX_MULT_SECTORS; s->fDMA = true; ataR3StartTransfer(pDevIns, pCtl, s, ataR3GetNSectors(s) * s->cbSector, PDMMEDIATXDIR_TO_DEVICE, ATAFN_BT_READ_WRITE_SECTORS, ATAFN_SS_WRITE_SECTORS, false); break; case ATA_READ_NATIVE_MAX_ADDRESS_EXT: s->fLBA48 = true; ataR3SetSector(s, s->cTotalSectors - 1); ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_SEEK: /* Used by the SCO OpenServer. Command is marked as obsolete */ ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_READ_NATIVE_MAX_ADDRESS: ataR3SetSector(s, RT_MIN(s->cTotalSectors, 1 << 28) - 1); ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_CHECK_POWER_MODE: s->uATARegNSector = 0xff; /* drive active or idle */ ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_SET_FEATURES: Log2(("%s: feature=%#x\n", __FUNCTION__, s->uATARegFeature)); if (!pDevR3->pDrvMedia) goto abort_cmd; switch (s->uATARegFeature) { case 0x02: /* write cache enable */ Log2(("%s: write cache enable\n", __FUNCTION__)); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case 0xaa: /* read look-ahead enable */ Log2(("%s: read look-ahead enable\n", __FUNCTION__)); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case 0x55: /* read look-ahead disable */ Log2(("%s: read look-ahead disable\n", __FUNCTION__)); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case 0xcc: /* reverting to power-on defaults enable */ Log2(("%s: revert to power-on defaults enable\n", __FUNCTION__)); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case 0x66: /* reverting to power-on defaults disable */ Log2(("%s: revert to power-on defaults disable\n", __FUNCTION__)); ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case 0x82: /* write cache disable */ Log2(("%s: write cache disable\n", __FUNCTION__)); /* As per the ATA/ATAPI-6 specs, a write cache disable * command MUST flush the write buffers to disc. */ ataR3StartTransfer(pDevIns, pCtl, s, 0, PDMMEDIATXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_FLUSH, false); break; case 0x03: { /* set transfer mode */ Log2(("%s: transfer mode %#04x\n", __FUNCTION__, s->uATARegNSector)); switch (s->uATARegNSector & 0xf8) { case 0x00: /* PIO default */ case 0x08: /* PIO mode */ break; case ATA_MODE_MDMA: /* MDMA mode */ s->uATATransferMode = (s->uATARegNSector & 0xf8) | RT_MIN(s->uATARegNSector & 0x07, ATA_MDMA_MODE_MAX); break; case ATA_MODE_UDMA: /* UDMA mode */ s->uATATransferMode = (s->uATARegNSector & 0xf8) | RT_MIN(s->uATARegNSector & 0x07, ATA_UDMA_MODE_MAX); break; default: goto abort_cmd; } ataR3CmdOK(pCtl, s, ATA_STAT_SEEK); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; } default: goto abort_cmd; } /* * OS/2 workarond: * The OS/2 IDE driver from MCP2 appears to rely on the feature register being * reset here. According to the specification, this is a driver bug as the register * contents are undefined after the call. This means we can just as well reset it. */ s->uATARegFeature = 0; break; case ATA_FLUSH_CACHE_EXT: case ATA_FLUSH_CACHE: if (!pDevR3->pDrvMedia || s->fATAPI) goto abort_cmd; ataR3StartTransfer(pDevIns, pCtl, s, 0, PDMMEDIATXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_FLUSH, false); break; case ATA_STANDBY_IMMEDIATE: ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; case ATA_IDLE_IMMEDIATE: LogRel(("PIIX3 ATA: LUN#%d: aborting current command\n", s->iLUN)); ataR3AbortCurrentCommand(pDevIns, pCtl, s, false); break; case ATA_SLEEP: ataR3CmdOK(pCtl, s, 0); ataHCSetIRQ(pDevIns, pCtl, s); break; /* ATAPI commands */ case ATA_IDENTIFY_PACKET_DEVICE: if (s->fATAPI) ataR3StartTransfer(pDevIns, pCtl, s, 512, PDMMEDIATXDIR_FROM_DEVICE, ATAFN_BT_NULL, ATAFN_SS_ATAPI_IDENTIFY, false); else { ataR3CmdError(pCtl, s, ABRT_ERR); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ } break; case ATA_EXECUTE_DEVICE_DIAGNOSTIC: ataR3StartTransfer(pDevIns, pCtl, s, 0, PDMMEDIATXDIR_NONE, ATAFN_BT_NULL, ATAFN_SS_EXECUTE_DEVICE_DIAGNOSTIC, false); break; case ATA_DEVICE_RESET: if (!s->fATAPI) goto abort_cmd; LogRel(("PIIX3 ATA: LUN#%d: performing device RESET\n", s->iLUN)); ataR3AbortCurrentCommand(pDevIns, pCtl, s, true); break; case ATA_PACKET: if (!s->fATAPI) goto abort_cmd; /* overlapping commands not supported */ if (s->uATARegFeature & 0x02) goto abort_cmd; ataR3StartTransfer(pDevIns, pCtl, s, ATAPI_PACKET_SIZE, PDMMEDIATXDIR_TO_DEVICE, ATAFN_BT_PACKET, ATAFN_SS_PACKET, false); break; case ATA_DATA_SET_MANAGEMENT: if (!pDevR3->pDrvMedia || !pDevR3->pDrvMedia->pfnDiscard) goto abort_cmd; if ( !(s->uATARegFeature & UINT8_C(0x01)) || (s->uATARegFeature & ~UINT8_C(0x01))) goto abort_cmd; s->fDMA = true; ataR3StartTransfer(pDevIns, pCtl, s, (s->uATARegNSectorHOB << 8 | s->uATARegNSector) * s->cbSector, PDMMEDIATXDIR_TO_DEVICE, ATAFN_BT_NULL, ATAFN_SS_TRIM, false); break; default: abort_cmd: ataR3CmdError(pCtl, s, ABRT_ERR); if (s->fATAPI) ataUnsetStatus(pCtl, s, ATA_STAT_READY); ataHCSetIRQ(pDevIns, pCtl, s); /* Shortcut, do not use AIO thread. */ break; } } # endif /* IN_RING3 */ #endif /* IN_RING0 || IN_RING3 */ /* * Note: There are four distinct cases of port I/O handling depending on * which devices (if any) are attached to an IDE channel: * * 1) No device attached. No response to writes or reads (i.e. reads return * all bits set). * * 2) Both devices attached. Reads and writes are processed normally. * * 3) Device 0 only. If device 0 is selected, normal behavior applies. But * if Device 1 is selected, writes are still directed to Device 0 (except * commands are not executed), reads from control/command registers are * directed to Device 0, but status/alt status reads return 0. If Device 1 * is a PACKET device, all reads return 0. See ATAPI-6 clause 9.16.1 and * Table 18 in clause 7.1. * * 4) Device 1 only - non-standard(!). Device 1 can't tell if Device 0 is * present or not and behaves the same. That means if Device 0 is selected, * Device 1 responds to writes (except commands are not executed) but does * not respond to reads. If Device 1 selected, normal behavior applies. * See ATAPI-6 clause 9.16.2 and Table 15 in clause 7.1. */ static VBOXSTRICTRC ataIOPortWriteU8(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, uint32_t addr, uint32_t val, uintptr_t iCtl) { RT_NOREF(iCtl); Log2(("%s: LUN#%d write addr=%#x val=%#04x\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].iLUN, addr, val)); addr &= 7; switch (addr) { case 0: break; case 1: /* feature register */ /* NOTE: data is written to the two drives */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegFeatureHOB = pCtl->aIfs[0].uATARegFeature; pCtl->aIfs[1].uATARegFeatureHOB = pCtl->aIfs[1].uATARegFeature; pCtl->aIfs[0].uATARegFeature = val; pCtl->aIfs[1].uATARegFeature = val; break; case 2: /* sector count */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegNSectorHOB = pCtl->aIfs[0].uATARegNSector; pCtl->aIfs[1].uATARegNSectorHOB = pCtl->aIfs[1].uATARegNSector; pCtl->aIfs[0].uATARegNSector = val; pCtl->aIfs[1].uATARegNSector = val; break; case 3: /* sector number */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegSectorHOB = pCtl->aIfs[0].uATARegSector; pCtl->aIfs[1].uATARegSectorHOB = pCtl->aIfs[1].uATARegSector; pCtl->aIfs[0].uATARegSector = val; pCtl->aIfs[1].uATARegSector = val; break; case 4: /* cylinder low */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegLCylHOB = pCtl->aIfs[0].uATARegLCyl; pCtl->aIfs[1].uATARegLCylHOB = pCtl->aIfs[1].uATARegLCyl; pCtl->aIfs[0].uATARegLCyl = val; pCtl->aIfs[1].uATARegLCyl = val; break; case 5: /* cylinder high */ pCtl->aIfs[0].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[1].uATARegDevCtl &= ~ATA_DEVCTL_HOB; pCtl->aIfs[0].uATARegHCylHOB = pCtl->aIfs[0].uATARegHCyl; pCtl->aIfs[1].uATARegHCylHOB = pCtl->aIfs[1].uATARegHCyl; pCtl->aIfs[0].uATARegHCyl = val; pCtl->aIfs[1].uATARegHCyl = val; break; case 6: /* drive/head */ pCtl->aIfs[0].uATARegSelect = (val & ~0x10) | 0xa0; pCtl->aIfs[1].uATARegSelect = (val | 0x10) | 0xa0; if (((val >> 4) & ATA_SELECTED_IF_MASK) != pCtl->iSelectedIf) { /* select another drive */ uintptr_t const iSelectedIf = (val >> 4) & ATA_SELECTED_IF_MASK; pCtl->iSelectedIf = (uint8_t)iSelectedIf; /* The IRQ line is multiplexed between the two drives, so * update the state when switching to another drive. Only need * to update interrupt line if it is enabled and there is a * state change. */ if ( !(pCtl->aIfs[iSelectedIf].uATARegDevCtl & ATA_DEVCTL_DISABLE_IRQ) && pCtl->aIfs[iSelectedIf].fIrqPending != pCtl->aIfs[iSelectedIf ^ 1].fIrqPending) { if (pCtl->aIfs[iSelectedIf].fIrqPending) { Log2(("%s: LUN#%d asserting IRQ (drive select change)\n", __FUNCTION__, pCtl->aIfs[iSelectedIf].iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if * the interrupt line is asserted. It monitors the line * for a rising edge. */ pCtl->BmDma.u8Status |= BM_STATUS_INT; if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 1); } else { Log2(("%s: LUN#%d deasserting IRQ (drive select change)\n", __FUNCTION__, pCtl->aIfs[iSelectedIf].iLUN)); if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 0); } } } break; default: case 7: /* command */ { /* ignore commands to non-existent device */ uintptr_t iSelectedIf = pCtl->iSelectedIf & ATA_SELECTED_IF_MASK; PATADEVSTATE pDev = &pCtl->aIfs[iSelectedIf]; if (iSelectedIf && !pDev->fPresent) /** @todo r=bird the iSelectedIf test here looks bogus... explain. */ break; #ifndef IN_RING3 /* Don't do anything complicated in GC */ return VINF_IOM_R3_IOPORT_WRITE; #else /* IN_RING3 */ PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); ataUnsetIRQ(pDevIns, pCtl, &pCtl->aIfs[iSelectedIf]); ataR3ParseCmd(pDevIns, pCtl, &pCtl->aIfs[iSelectedIf], &pThisCC->aCts[iCtl].aIfs[iSelectedIf], val); break; #endif /* !IN_RING3 */ } } return VINF_SUCCESS; } static VBOXSTRICTRC ataIOPortReadU8(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, uint32_t addr, uint32_t *pu32) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; uint32_t val; bool fHOB; /* Check if the guest is reading from a non-existent device. */ if (RT_LIKELY(s->fPresent)) { /* likely */ } else { if (pCtl->iSelectedIf) /* Device 1 selected, Device 0 responding for it. */ { Assert(pCtl->aIfs[0].fPresent); /* When an ATAPI device 0 responds for non-present device 1, it generally * returns zeros on reads. The Error register is an exception. See clause 7.1, * table 16 in ATA-6 specification. */ if (((addr & 7) != 1) && pCtl->aIfs[0].fATAPI) { Log2(("%s: addr=%#x, val=0: LUN#%d not attached/LUN#%d ATAPI\n", __FUNCTION__, addr, s->iLUN, pCtl->aIfs[0].iLUN)); *pu32 = 0; return VINF_SUCCESS; } /* Else handle normally. */ } else /* Device 0 selected (but not present). */ { /* Because device 1 has no way to tell if there is device 0, the behavior is the same * as for an empty bus; see comments in ataIOPortReadEmptyBus(). Note that EFI (TianoCore) * relies on this behavior when detecting devices. */ *pu32 = ATA_EMPTY_BUS_DATA; Log2(("%s: addr=%#x: LUN#%d not attached, val=%#02x\n", __FUNCTION__, addr, s->iLUN, *pu32)); return VINF_SUCCESS; } } fHOB = !!(s->uATARegDevCtl & (1 << 7)); switch (addr & 7) { case 0: /* data register */ val = 0xff; break; case 1: /* error register */ /* The ATA specification is very terse when it comes to specifying * the precise effects of reading back the error/feature register. * The error register (read-only) shares the register number with * the feature register (write-only), so it seems that it's not * necessary to support the usual HOB readback here. */ if (!s->fPresent) val = 0; else val = s->uATARegError; break; case 2: /* sector count */ if (fHOB) val = s->uATARegNSectorHOB; else val = s->uATARegNSector; break; case 3: /* sector number */ if (fHOB) val = s->uATARegSectorHOB; else val = s->uATARegSector; break; case 4: /* cylinder low */ if (fHOB) val = s->uATARegLCylHOB; else val = s->uATARegLCyl; break; case 5: /* cylinder high */ if (fHOB) val = s->uATARegHCylHOB; else val = s->uATARegHCyl; break; case 6: /* drive/head */ /* This register must always work as long as there is at least * one drive attached to the controller. It is common between * both drives anyway (completely identical content). */ if (!pCtl->aIfs[0].fPresent && !pCtl->aIfs[1].fPresent) val = 0; else val = s->uATARegSelect; break; default: case 7: /* primary status */ { if (!s->fPresent) val = 0; else val = s->uATARegStatus; /* Give the async I/O thread an opportunity to make progress, * don't let it starve by guests polling frequently. EMT has a * lower priority than the async I/O thread, but sometimes the * host OS doesn't care. With some guests we are only allowed to * be busy for about 5 milliseconds in some situations. Note that * this is no guarantee for any other VBox thread getting * scheduled, so this just lowers the CPU load a bit when drives * are busy. It cannot help with timing problems. */ if (val & ATA_STAT_BUSY) { #ifdef IN_RING3 /* @bugref{1960}: Don't yield all the time, unless it's a reset (can be tricky). */ bool fYield = (s->cBusyStatusHackR3++ & s->cBusyStatusHackR3Rate) == 0 || pCtl->fReset; ataR3LockLeave(pDevIns, pCtl); /* * The thread might be stuck in an I/O operation due to a high I/O * load on the host (see @bugref{3301}). To perform the reset * successfully we interrupt the operation by sending a signal to * the thread if the thread didn't responded in 10ms. * * This works only on POSIX hosts (Windows has a CancelSynchronousIo * function which does the same but it was introduced with Vista) but * so far this hang was only observed on Linux and Mac OS X. * * This is a workaround and needs to be solved properly. */ if (pCtl->fReset) { uint64_t u64ResetTimeStop = RTTimeMilliTS(); if (u64ResetTimeStop - pCtl->u64ResetTime >= 10) { LogRel(("PIIX3 ATA LUN#%d: Async I/O thread probably stuck in operation, interrupting\n", s->iLUN)); pCtl->u64ResetTime = u64ResetTimeStop; # ifndef RT_OS_WINDOWS /* We've got this API on windows, but it doesn't necessarily interrupt I/O. */ PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); PATACONTROLLERR3 pCtlR3 = &RT_SAFE_SUBSCRIPT(pThisCC->aCts, pCtl->iCtl); RTThreadPoke(pCtlR3->hAsyncIOThread); # endif Assert(fYield); } } if (fYield) { STAM_REL_PROFILE_ADV_START(&s->StatStatusYields, a); RTThreadYield(); STAM_REL_PROFILE_ADV_STOP(&s->StatStatusYields, a); } ASMNopPause(); ataR3LockEnter(pDevIns, pCtl); val = s->uATARegStatus; #else /* !IN_RING3 */ /* Cannot yield CPU in raw-mode and ring-0 context. And switching * to host context for each and every busy status is too costly, * especially on SMP systems where we don't gain much by * yielding the CPU to someone else. */ if ((s->cBusyStatusHackRZ++ & s->cBusyStatusHackRZRate) == 1) { s->cBusyStatusHackR3 = 0; /* Forces a yield. */ return VINF_IOM_R3_IOPORT_READ; } #endif /* !IN_RING3 */ } else { s->cBusyStatusHackRZ = 0; s->cBusyStatusHackR3 = 0; } ataUnsetIRQ(pDevIns, pCtl, s); break; } } Log2(("%s: LUN#%d addr=%#x val=%#04x\n", __FUNCTION__, s->iLUN, addr, val)); *pu32 = val; return VINF_SUCCESS; } /* * Read the Alternate status register. Does not affect interrupts. */ static uint32_t ataStatusRead(PATACONTROLLER pCtl, uint32_t uIoPortForLog) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; uint32_t val; RT_NOREF(uIoPortForLog); Assert(pCtl->aIfs[0].fPresent || pCtl->aIfs[1].fPresent); /* Channel must not be empty. */ if (pCtl->iSelectedIf == 1 && !s->fPresent) val = 0; /* Device 1 selected, Device 0 responding for it. */ else val = s->uATARegStatus; Log2(("%s: LUN#%d read addr=%#x val=%#04x\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].iLUN, uIoPortForLog, val)); return val; } static int ataControlWrite(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, uint32_t val, uint32_t uIoPortForLog) { RT_NOREF(uIoPortForLog); #ifndef IN_RING3 if ((val ^ pCtl->aIfs[0].uATARegDevCtl) & ATA_DEVCTL_RESET) return VINF_IOM_R3_IOPORT_WRITE; /* The RESET stuff is too complicated for RC+R0. */ #endif /* !IN_RING3 */ Log2(("%s: LUN#%d write addr=%#x val=%#04x\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].iLUN, uIoPortForLog, val)); /* RESET is common for both drives attached to a controller. */ if ( !(pCtl->aIfs[0].uATARegDevCtl & ATA_DEVCTL_RESET) && (val & ATA_DEVCTL_RESET)) { #ifdef IN_RING3 /* Software RESET low to high */ int32_t uCmdWait0 = -1; int32_t uCmdWait1 = -1; uint64_t uNow = RTTimeNanoTS(); if (pCtl->aIfs[0].u64CmdTS) uCmdWait0 = (uNow - pCtl->aIfs[0].u64CmdTS) / 1000; if (pCtl->aIfs[1].u64CmdTS) uCmdWait1 = (uNow - pCtl->aIfs[1].u64CmdTS) / 1000; LogRel(("PIIX3 ATA: Ctl#%d: RESET, DevSel=%d AIOIf=%d CmdIf0=%#04x (%d usec ago) CmdIf1=%#04x (%d usec ago)\n", pCtl->iCtl, pCtl->iSelectedIf, pCtl->iAIOIf, pCtl->aIfs[0].uATARegCommand, uCmdWait0, pCtl->aIfs[1].uATARegCommand, uCmdWait1)); pCtl->fReset = true; /* Everything must be done after the reset flag is set, otherwise * there are unavoidable races with the currently executing request * (which might just finish in the mean time). */ pCtl->fChainedTransfer = false; for (uint32_t i = 0; i < RT_ELEMENTS(pCtl->aIfs); i++) { ataR3ResetDevice(pDevIns, pCtl, &pCtl->aIfs[i]); /* The following cannot be done using ataSetStatusValue() since the * reset flag is already set, which suppresses all status changes. */ pCtl->aIfs[i].uATARegStatus = ATA_STAT_BUSY | ATA_STAT_SEEK; Log2(("%s: LUN#%d status %#04x\n", __FUNCTION__, pCtl->aIfs[i].iLUN, pCtl->aIfs[i].uATARegStatus)); pCtl->aIfs[i].uATARegError = 0x01; } pCtl->iSelectedIf = 0; ataR3AsyncIOClearRequests(pDevIns, pCtl); Log2(("%s: Ctl#%d: message to async I/O thread, resetA\n", __FUNCTION__, pCtl->iCtl)); if (val & ATA_DEVCTL_HOB) { val &= ~ATA_DEVCTL_HOB; Log2(("%s: ignored setting HOB\n", __FUNCTION__)); } /* Save the timestamp we started the reset. */ pCtl->u64ResetTime = RTTimeMilliTS(); /* Issue the reset request now. */ ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataResetARequest); #else /* !IN_RING3 */ AssertMsgFailed(("RESET handling is too complicated for GC\n")); #endif /* IN_RING3 */ } else if ( (pCtl->aIfs[0].uATARegDevCtl & ATA_DEVCTL_RESET) && !(val & ATA_DEVCTL_RESET)) { #ifdef IN_RING3 /* Software RESET high to low */ Log(("%s: deasserting RESET\n", __FUNCTION__)); Log2(("%s: Ctl#%d: message to async I/O thread, resetC\n", __FUNCTION__, pCtl->iCtl)); if (val & ATA_DEVCTL_HOB) { val &= ~ATA_DEVCTL_HOB; Log2(("%s: ignored setting HOB\n", __FUNCTION__)); } ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataResetCRequest); #else /* !IN_RING3 */ AssertMsgFailed(("RESET handling is too complicated for GC\n")); #endif /* IN_RING3 */ } /* Change of interrupt disable flag. Update interrupt line if interrupt * is pending on the current interface. */ if ( ((val ^ pCtl->aIfs[0].uATARegDevCtl) & ATA_DEVCTL_DISABLE_IRQ) && pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].fIrqPending) { if (!(val & ATA_DEVCTL_DISABLE_IRQ)) { Log2(("%s: LUN#%d asserting IRQ (interrupt disable change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].iLUN)); /* The BMDMA unit unconditionally sets BM_STATUS_INT if the * interrupt line is asserted. It monitors the line for a rising * edge. */ pCtl->BmDma.u8Status |= BM_STATUS_INT; if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 1); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 1); } else { Log2(("%s: LUN#%d deasserting IRQ (interrupt disable change)\n", __FUNCTION__, pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].iLUN)); if (pCtl->irq == 16) PDMDevHlpPCISetIrq(pDevIns, 0, 0); else PDMDevHlpISASetIrq(pDevIns, pCtl->irq, 0); } } if (val & ATA_DEVCTL_HOB) Log2(("%s: set HOB\n", __FUNCTION__)); pCtl->aIfs[0].uATARegDevCtl = val; pCtl->aIfs[1].uATARegDevCtl = val; return VINF_SUCCESS; } #if defined(IN_RING0) || defined(IN_RING3) static void ataHCPIOTransfer(PPDMDEVINS pDevIns, PATACONTROLLER pCtl) { PATADEVSTATE s; s = &pCtl->aIfs[pCtl->iAIOIf & ATA_SELECTED_IF_MASK]; Log3(("%s: if=%p\n", __FUNCTION__, s)); if (s->cbTotalTransfer && s->iIOBufferCur > s->iIOBufferEnd) { # ifdef IN_RING3 LogRel(("PIIX3 ATA: LUN#%d: %s data in the middle of a PIO transfer - VERY SLOW\n", s->iLUN, s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE ? "loading" : "storing")); /* Any guest OS that triggers this case has a pathetic ATA driver. * In a real system it would block the CPU via IORDY, here we do it * very similarly by not continuing with the current instruction * until the transfer to/from the storage medium is completed. */ uint8_t const iSourceSink = s->iSourceSink; if ( iSourceSink != ATAFN_SS_NULL && iSourceSink < RT_ELEMENTS(g_apfnSourceSinkFuncs)) { bool fRedo; uint8_t status = s->uATARegStatus; PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); PATADEVSTATER3 pDevR3 = &RT_SAFE_SUBSCRIPT(RT_SAFE_SUBSCRIPT(pThisCC->aCts, pCtl->iCtl).aIfs, s->iDev); ataSetStatusValue(pCtl, s, ATA_STAT_BUSY); Log2(("%s: calling source/sink function\n", __FUNCTION__)); fRedo = g_apfnSourceSinkFuncs[iSourceSink](pDevIns, pCtl, s, pDevR3); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo)) return; ataSetStatusValue(pCtl, s, status); s->iIOBufferCur = 0; s->iIOBufferEnd = s->cbElementaryTransfer; } else Assert(iSourceSink == ATAFN_SS_NULL); # else AssertReleaseFailed(); # endif } if (s->cbTotalTransfer) { if (s->fATAPITransfer) ataHCPIOTransferLimitATAPI(s); if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE && s->cbElementaryTransfer > s->cbTotalTransfer) s->cbElementaryTransfer = s->cbTotalTransfer; Log2(("%s: %s tx_size=%d elem_tx_size=%d index=%d end=%d\n", __FUNCTION__, s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE ? "T2I" : "I2T", s->cbTotalTransfer, s->cbElementaryTransfer, s->iIOBufferCur, s->iIOBufferEnd)); ataHCPIOTransferStart(pCtl, s, s->iIOBufferCur, s->cbElementaryTransfer); s->cbTotalTransfer -= s->cbElementaryTransfer; s->iIOBufferCur += s->cbElementaryTransfer; if (s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE && s->cbElementaryTransfer > s->cbTotalTransfer) s->cbElementaryTransfer = s->cbTotalTransfer; } else ataHCPIOTransferStop(pDevIns, pCtl, s); } DECLINLINE(void) ataHCPIOTransferFinish(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATADEVSTATE s) { /* Do not interfere with RESET processing if the PIO transfer finishes * while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed continuing PIO transfer as RESET is active\n", __FUNCTION__, pCtl->iCtl)); return; } if ( s->uTxDir == PDMMEDIATXDIR_TO_DEVICE || ( s->iSourceSink != ATAFN_SS_NULL && s->iIOBufferCur >= s->iIOBufferEnd)) { /* Need to continue the transfer in the async I/O thread. This is * the case for write operations or generally for not yet finished * transfers (some data might need to be read). */ ataSetStatus(pCtl, s, ATA_STAT_BUSY); ataUnsetStatus(pCtl, s, ATA_STAT_READY | ATA_STAT_DRQ); Log2(("%s: Ctl#%d: message to async I/O thread, continuing PIO transfer\n", __FUNCTION__, pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataPIORequest); } else { /* Either everything finished (though some data might still be pending) * or some data is pending before the next read is due. */ /* Continue a previously started transfer. */ ataUnsetStatus(pCtl, s, ATA_STAT_DRQ); ataSetStatus(pCtl, s, ATA_STAT_READY); if (s->cbTotalTransfer) { /* There is more to transfer, happens usually for large ATAPI * reads - the protocol limits the chunk size to 65534 bytes. */ ataHCPIOTransfer(pDevIns, pCtl); ataHCSetIRQ(pDevIns, pCtl, s); } else { Log2(("%s: Ctl#%d: skipping message to async I/O thread, ending PIO transfer\n", __FUNCTION__, pCtl->iCtl)); /* Finish PIO transfer. */ ataHCPIOTransfer(pDevIns, pCtl); Assert(!pCtl->fRedo); } } } #endif /* IN_RING0 || IN_RING3 */ /** * Fallback for ataCopyPioData124 that handles unaligned and out of bounds cases. * * @param pIf The device interface to work with. * @param pbDst The destination buffer. * @param pbSrc The source buffer. * @param offStart The start offset (iIOBufferPIODataStart). * @param cbCopy The number of bytes to copy, either 1, 2 or 4 bytes. */ DECL_NO_INLINE(static, void) ataCopyPioData124Slow(PATADEVSTATE pIf, uint8_t *pbDst, const uint8_t *pbSrc, uint32_t offStart, uint32_t cbCopy) { uint32_t const offNext = offStart + cbCopy; uint32_t const cbIOBuffer = RT_MIN(pIf->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE); if (offStart + cbCopy > cbIOBuffer) { Log(("%s: cbCopy=%#x offStart=%#x cbIOBuffer=%#x offNext=%#x (iIOBufferPIODataEnd=%#x)\n", __FUNCTION__, cbCopy, offStart, cbIOBuffer, offNext, pIf->iIOBufferPIODataEnd)); if (offStart < cbIOBuffer) cbCopy = cbIOBuffer - offStart; else cbCopy = 0; } switch (cbCopy) { case 4: pbDst[3] = pbSrc[3]; RT_FALL_THRU(); case 3: pbDst[2] = pbSrc[2]; RT_FALL_THRU(); case 2: pbDst[1] = pbSrc[1]; RT_FALL_THRU(); case 1: pbDst[0] = pbSrc[0]; RT_FALL_THRU(); case 0: break; default: AssertFailed(); /* impossible */ } pIf->iIOBufferPIODataStart = offNext; } /** * Work for ataDataWrite & ataDataRead that copies data without using memcpy. * * This also updates pIf->iIOBufferPIODataStart. * * The two buffers are either stack (32-bit aligned) or somewhere within * pIf->abIOBuffer. * * @param pIf The device interface to work with. * @param pbDst The destination buffer. * @param pbSrc The source buffer. * @param offStart The start offset (iIOBufferPIODataStart). * @param cbCopy The number of bytes to copy, either 1, 2 or 4 bytes. */ DECLINLINE(void) ataCopyPioData124(PATADEVSTATE pIf, uint8_t *pbDst, const uint8_t *pbSrc, uint32_t offStart, uint32_t cbCopy) { /* * Quick bounds checking can be done by checking that the abIOBuffer offset * (iIOBufferPIODataStart) is aligned at the transfer size (which is ASSUMED * to be 1, 2 or 4). However, since we're paranoid and don't currently * trust iIOBufferPIODataEnd to be within bounds, we current check against the * IO buffer size too. */ Assert(cbCopy == 1 || cbCopy == 2 || cbCopy == 4); if (RT_LIKELY( !(offStart & (cbCopy - 1)) && offStart + cbCopy <= RT_MIN(pIf->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE))) { switch (cbCopy) { case 4: *(uint32_t *)pbDst = *(uint32_t const *)pbSrc; break; case 2: *(uint16_t *)pbDst = *(uint16_t const *)pbSrc; break; case 1: *pbDst = *pbSrc; break; } pIf->iIOBufferPIODataStart = offStart + cbCopy; } else ataCopyPioData124Slow(pIf, pbDst, pbSrc, offStart, cbCopy); } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for primary port range OUT operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortWrite1Data(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); RT_NOREF(offPort); Assert((uintptr_t)pvUser < 2); Assert(offPort == pCtl->IOPortBase1); Assert(cb == 2 || cb == 4); /* Writes to the data port may be 16-bit or 32-bit. */ VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc == VINF_SUCCESS) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; uint32_t const iIOBufferPIODataStart = RT_MIN(s->iIOBufferPIODataStart, sizeof(s->abIOBuffer)); uint32_t const iIOBufferPIODataEnd = RT_MIN(s->iIOBufferPIODataEnd, sizeof(s->abIOBuffer)); if (iIOBufferPIODataStart < iIOBufferPIODataEnd) { Assert(s->uTxDir == PDMMEDIATXDIR_TO_DEVICE); uint8_t *pbDst = &s->abIOBuffer[iIOBufferPIODataStart]; uint8_t const *pbSrc = (uint8_t const *)&u32; #ifdef IN_RC /* Raw-mode: The ataHCPIOTransfer following the last transfer unit requires I/O thread signalling, we must go to ring-3 for that. */ if (iIOBufferPIODataStart + cb < iIOBufferPIODataEnd) ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cb); else rc = VINF_IOM_R3_IOPORT_WRITE; #elif defined(IN_RING0) /* Ring-0: We can do I/O thread signalling here, however for paranoid reasons triggered by a special case in ataHCPIOTransferFinish, we take extra care here. */ if (iIOBufferPIODataStart + cb < iIOBufferPIODataEnd) ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cb); else if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE) /* paranoia */ { ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cb); ataHCPIOTransferFinish(pDevIns, pCtl, s); } else { Log(("%s: Unexpected\n", __FUNCTION__)); rc = VINF_IOM_R3_IOPORT_WRITE; } #else /* IN_RING 3*/ ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cb); if (s->iIOBufferPIODataStart >= iIOBufferPIODataEnd) ataHCPIOTransferFinish(pDevIns, pCtl, s); #endif /* IN_RING 3*/ } else Log2(("%s: DUMMY data\n", __FUNCTION__)); Log3(("%s: addr=%#x val=%.*Rhxs rc=%d\n", __FUNCTION__, offPort + pCtl->IOPortBase1, cb, &u32, VBOXSTRICTRC_VAL(rc))); PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } else Log3(("%s: addr=%#x -> %d\n", __FUNCTION__, offPort + pCtl->IOPortBase1, VBOXSTRICTRC_VAL(rc))); return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWIN, * Port I/O Handler for primary port range IN operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortRead1Data(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); RT_NOREF(offPort); Assert((uintptr_t)pvUser < 2); Assert(offPort == pCtl->IOPortBase1); /* Reads from the data register may be 16-bit or 32-bit. Byte accesses are upgraded to word. */ Assert(cb == 1 || cb == 2 || cb == 4); uint32_t cbActual = cb != 1 ? cb : 2; *pu32 = 0; VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc == VINF_SUCCESS) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; if (s->iIOBufferPIODataStart < s->iIOBufferPIODataEnd) { Assert(s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE); uint32_t const iIOBufferPIODataStart = RT_MIN(s->iIOBufferPIODataStart, sizeof(s->abIOBuffer)); uint32_t const iIOBufferPIODataEnd = RT_MIN(s->iIOBufferPIODataEnd, sizeof(s->abIOBuffer)); uint8_t const *pbSrc = &s->abIOBuffer[iIOBufferPIODataStart]; uint8_t *pbDst = (uint8_t *)pu32; #ifdef IN_RC /* All but the last transfer unit is simple enough for RC, but * sending a request to the async IO thread is too complicated. */ if (iIOBufferPIODataStart + cbActual < iIOBufferPIODataEnd) ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cbActual); else rc = VINF_IOM_R3_IOPORT_READ; #elif defined(IN_RING0) /* Ring-0: We can do I/O thread signalling here. However there is one case in ataHCPIOTransfer that does a LogRel and would (but not from here) call directly into the driver code. We detect that odd case here cand return to ring-3 to handle it. */ if (iIOBufferPIODataStart + cbActual < iIOBufferPIODataEnd) ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cbActual); else if ( s->cbTotalTransfer == 0 || s->iSourceSink != ATAFN_SS_NULL || s->iIOBufferCur <= s->iIOBufferEnd) { ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cbActual); ataHCPIOTransferFinish(pDevIns, pCtl, s); } else { Log(("%s: Unexpected\n",__FUNCTION__)); rc = VINF_IOM_R3_IOPORT_READ; } #else /* IN_RING3 */ ataCopyPioData124(s, pbDst, pbSrc, iIOBufferPIODataStart, cbActual); if (s->iIOBufferPIODataStart >= iIOBufferPIODataEnd) ataHCPIOTransferFinish(pDevIns, pCtl, s); #endif /* IN_RING3 */ /* Just to be on the safe side (caller takes care of this, really). */ if (cb == 1) *pu32 &= 0xff; } else { Log2(("%s: DUMMY data\n", __FUNCTION__)); memset(pu32, 0xff, cb); } Log3(("%s: addr=%#x val=%.*Rhxs rc=%d\n", __FUNCTION__, offPort, cb, pu32, VBOXSTRICTRC_VAL(rc))); PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } else Log3(("%s: addr=%#x -> %d\n", __FUNCTION__, offPort, VBOXSTRICTRC_VAL(rc))); return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWINSTRING, * Port I/O Handler for primary port range IN string operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortReadStr1Data(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint8_t *pbDst, uint32_t *pcTransfers, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); RT_NOREF(offPort); Assert((uintptr_t)pvUser < 2); Assert(offPort == pCtl->IOPortBase1); Assert(*pcTransfers > 0); VBOXSTRICTRC rc; if (cb == 2 || cb == 4) { rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc == VINF_SUCCESS) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; uint32_t const offStart = s->iIOBufferPIODataStart; uint32_t const offEnd = s->iIOBufferPIODataEnd; if (offStart < offEnd) { /* * Figure how much we can copy. Usually it's the same as the request. * The last transfer unit cannot be handled in RC, as it involves * thread communication. In R0 we let the non-string callback handle it, * and ditto for overflows/dummy data. */ uint32_t cAvailable = (offEnd - offStart) / cb; #ifndef IN_RING3 if (cAvailable > 0) cAvailable--; #endif uint32_t const cRequested = *pcTransfers; if (cAvailable > cRequested) cAvailable = cRequested; uint32_t const cbTransfer = cAvailable * cb; uint32_t const offEndThisXfer = offStart + cbTransfer; if ( offEndThisXfer <= RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE) && offStart < RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE) /* paranoia */ && cbTransfer > 0) { /* * Do the transfer. */ uint8_t const *pbSrc = &s->abIOBuffer[offStart]; memcpy(pbDst, pbSrc, cbTransfer); Log3(("%s: addr=%#x cb=%#x cbTransfer=%#x val=%.*Rhxd\n", __FUNCTION__, offPort, cb, cbTransfer, cbTransfer, pbSrc)); s->iIOBufferPIODataStart = offEndThisXfer; #ifdef IN_RING3 if (offEndThisXfer >= offEnd) ataHCPIOTransferFinish(pDevIns, pCtl, s); #endif *pcTransfers = cRequested - cAvailable; } else Log2(("ataIOPortReadStr1Data: DUMMY/Overflow!\n")); } else { /* * Dummy read (shouldn't happen) return 0xff like the non-string handler. */ Log2(("ataIOPortReadStr1Data: DUMMY data (%#x bytes)\n", *pcTransfers * cb)); memset(pbDst, 0xff, *pcTransfers * cb); *pcTransfers = 0; } PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } } /* * Let the non-string I/O callback handle 1 byte reads. */ else { Log2(("ataIOPortReadStr1Data: 1 byte read (%#x transfers)\n", *pcTransfers)); AssertFailed(); rc = VINF_SUCCESS; } return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWOUTSTRING, * Port I/O Handler for primary port range OUT string operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortWriteStr1Data(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint8_t const *pbSrc, uint32_t *pcTransfers, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); RT_NOREF(offPort); Assert((uintptr_t)pvUser < 2); Assert(offPort == pCtl->IOPortBase1); Assert(*pcTransfers > 0); VBOXSTRICTRC rc; if (cb == 2 || cb == 4) { rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc == VINF_SUCCESS) { PATADEVSTATE s = &pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK]; uint32_t const offStart = s->iIOBufferPIODataStart; uint32_t const offEnd = s->iIOBufferPIODataEnd; if (offStart < offEnd) { /* * Figure how much we can copy. Usually it's the same as the request. * The last transfer unit cannot be handled in RC, as it involves * thread communication. In R0 we let the non-string callback handle it, * and ditto for overflows/dummy data. */ uint32_t cAvailable = (offEnd - offStart) / cb; #ifndef IN_RING3 if (cAvailable) cAvailable--; #endif uint32_t const cRequested = *pcTransfers; if (cAvailable > cRequested) cAvailable = cRequested; uint32_t const cbTransfer = cAvailable * cb; uint32_t const offEndThisXfer = offStart + cbTransfer; if ( offEndThisXfer <= RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE) && offStart < RT_MIN(s->cbIOBuffer, ATA_MAX_IO_BUFFER_SIZE) /* paranoia */ && cbTransfer > 0) { /* * Do the transfer. */ void *pvDst = &s->abIOBuffer[offStart]; memcpy(pvDst, pbSrc, cbTransfer); Log3(("%s: addr=%#x val=%.*Rhxs\n", __FUNCTION__, offPort + pCtl->IOPortBase1, cbTransfer, pvDst)); s->iIOBufferPIODataStart = offEndThisXfer; #ifdef IN_RING3 if (offEndThisXfer >= offEnd) ataHCPIOTransferFinish(pDevIns, pCtl, s); #endif *pcTransfers = cRequested - cAvailable; } else Log2(("ataIOPortWriteStr1Data: DUMMY/Overflow!\n")); } else { Log2(("ataIOPortWriteStr1Data: DUMMY data (%#x bytes)\n", *pcTransfers * cb)); *pcTransfers = 0; } PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } } /* * Let the non-string I/O callback handle 1 byte reads. */ else { Log2(("ataIOPortWriteStr1Data: 1 byte write (%#x transfers)\n", *pcTransfers)); AssertFailed(); rc = VINF_SUCCESS; } return rc; } #ifdef IN_RING3 static void ataR3DMATransferStop(PATADEVSTATE s) { s->cbTotalTransfer = 0; s->cbElementaryTransfer = 0; s->iBeginTransfer = ATAFN_BT_NULL; s->iSourceSink = ATAFN_SS_NULL; } /** * Perform the entire DMA transfer in one go (unless a source/sink operation * has to be redone or a RESET comes in between). Unlike the PIO counterpart * this function cannot handle empty transfers. * * @param pDevIns The device instance. * @param pCtl Controller for which to perform the transfer, shared bits. * @param pCtlR3 The ring-3 controller state. */ static void ataR3DMATransfer(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATACONTROLLERR3 pCtlR3) { uint8_t const iAIOIf = pCtl->iAIOIf & ATA_SELECTED_IF_MASK; PATADEVSTATE s = &pCtl->aIfs[iAIOIf]; PATADEVSTATER3 pDevR3 = &pCtlR3->aIfs[iAIOIf]; bool fRedo; RTGCPHYS32 GCPhysDesc; uint32_t cbTotalTransfer, cbElementaryTransfer; uint32_t iIOBufferCur, iIOBufferEnd; PDMMEDIATXDIR uTxDir; bool fLastDesc = false; Assert(sizeof(BMDMADesc) == 8); fRedo = pCtl->fRedo; if (RT_LIKELY(!fRedo)) Assert(s->cbTotalTransfer); uTxDir = (PDMMEDIATXDIR)s->uTxDir; cbTotalTransfer = s->cbTotalTransfer; cbElementaryTransfer = RT_MIN(s->cbElementaryTransfer, sizeof(s->abIOBuffer)); iIOBufferEnd = RT_MIN(s->iIOBufferEnd, sizeof(s->abIOBuffer)); iIOBufferCur = RT_MIN(RT_MIN(s->iIOBufferCur, sizeof(s->abIOBuffer)), iIOBufferEnd); /* The DMA loop is designed to hold the lock only when absolutely * necessary. This avoids long freezes should the guest access the * ATA registers etc. for some reason. */ ataR3LockLeave(pDevIns, pCtl); Log2(("%s: %s tx_size=%d elem_tx_size=%d index=%d end=%d\n", __FUNCTION__, uTxDir == PDMMEDIATXDIR_FROM_DEVICE ? "T2I" : "I2T", cbTotalTransfer, cbElementaryTransfer, iIOBufferCur, iIOBufferEnd)); for (GCPhysDesc = pCtl->GCPhysFirstDMADesc; GCPhysDesc <= pCtl->GCPhysLastDMADesc; GCPhysDesc += sizeof(BMDMADesc)) { BMDMADesc DMADesc; RTGCPHYS32 GCPhysBuffer; uint32_t cbBuffer; if (RT_UNLIKELY(fRedo)) { GCPhysBuffer = pCtl->GCPhysRedoDMABuffer; cbBuffer = pCtl->cbRedoDMABuffer; fLastDesc = pCtl->fRedoDMALastDesc; DMADesc.GCPhysBuffer = DMADesc.cbBuffer = 0; /* Shut up MSC. */ } else { PDMDevHlpPhysRead(pDevIns, GCPhysDesc, &DMADesc, sizeof(BMDMADesc)); GCPhysBuffer = RT_LE2H_U32(DMADesc.GCPhysBuffer); cbBuffer = RT_LE2H_U32(DMADesc.cbBuffer); fLastDesc = RT_BOOL(cbBuffer & UINT32_C(0x80000000)); cbBuffer &= 0xfffe; if (cbBuffer == 0) cbBuffer = 0x10000; if (cbBuffer > cbTotalTransfer) cbBuffer = cbTotalTransfer; } while (RT_UNLIKELY(fRedo) || (cbBuffer && cbTotalTransfer)) { if (RT_LIKELY(!fRedo)) { uint32_t cbXfer = RT_MIN(RT_MIN(cbBuffer, iIOBufferEnd - iIOBufferCur), sizeof(s->abIOBuffer) - RT_MIN(iIOBufferCur, sizeof(s->abIOBuffer))); Log2(("%s: DMA desc %#010x: addr=%#010x size=%#010x orig_size=%#010x\n", __FUNCTION__, (int)GCPhysDesc, GCPhysBuffer, cbBuffer, RT_LE2H_U32(DMADesc.cbBuffer) & 0xfffe)); if (uTxDir == PDMMEDIATXDIR_FROM_DEVICE) PDMDevHlpPCIPhysWrite(pDevIns, GCPhysBuffer, &s->abIOBuffer[iIOBufferCur], cbXfer); else PDMDevHlpPCIPhysRead(pDevIns, GCPhysBuffer, &s->abIOBuffer[iIOBufferCur], cbXfer); iIOBufferCur += cbXfer; cbTotalTransfer -= cbXfer; cbBuffer -= cbXfer; GCPhysBuffer += cbXfer; } if ( iIOBufferCur == iIOBufferEnd && (uTxDir == PDMMEDIATXDIR_TO_DEVICE || cbTotalTransfer)) { if (uTxDir == PDMMEDIATXDIR_FROM_DEVICE && cbElementaryTransfer > cbTotalTransfer) cbElementaryTransfer = cbTotalTransfer; ataR3LockEnter(pDevIns, pCtl); /* The RESET handler could have cleared the DMA transfer * state (since we didn't hold the lock until just now * the guest can continue in parallel). If so, the state * is already set up so the loop is exited immediately. */ uint8_t const iSourceSink = s->iSourceSink; if ( iSourceSink != ATAFN_SS_NULL && iSourceSink < RT_ELEMENTS(g_apfnSourceSinkFuncs)) { s->iIOBufferCur = iIOBufferCur; s->iIOBufferEnd = iIOBufferEnd; s->cbElementaryTransfer = cbElementaryTransfer; s->cbTotalTransfer = cbTotalTransfer; Log2(("%s: calling source/sink function\n", __FUNCTION__)); fRedo = g_apfnSourceSinkFuncs[iSourceSink](pDevIns, pCtl, s, pDevR3); if (RT_UNLIKELY(fRedo)) { pCtl->GCPhysFirstDMADesc = GCPhysDesc; pCtl->GCPhysRedoDMABuffer = GCPhysBuffer; pCtl->cbRedoDMABuffer = cbBuffer; pCtl->fRedoDMALastDesc = fLastDesc; } else { cbTotalTransfer = s->cbTotalTransfer; cbElementaryTransfer = s->cbElementaryTransfer; if (uTxDir == PDMMEDIATXDIR_TO_DEVICE && cbElementaryTransfer > cbTotalTransfer) cbElementaryTransfer = cbTotalTransfer; iIOBufferCur = 0; iIOBufferEnd = RT_MIN(cbElementaryTransfer, sizeof(s->abIOBuffer)); } pCtl->fRedo = fRedo; } else { /* This forces the loop to exit immediately. */ Assert(iSourceSink == ATAFN_SS_NULL); GCPhysDesc = pCtl->GCPhysLastDMADesc + 1; } ataR3LockLeave(pDevIns, pCtl); if (RT_UNLIKELY(fRedo)) break; } } if (RT_UNLIKELY(fRedo)) break; /* end of transfer */ if (!cbTotalTransfer || fLastDesc) break; ataR3LockEnter(pDevIns, pCtl); if (!(pCtl->BmDma.u8Cmd & BM_CMD_START) || pCtl->fReset) { LogRel(("PIIX3 ATA: Ctl#%d: ABORT DMA%s\n", pCtl->iCtl, pCtl->fReset ? " due to RESET" : "")); if (!pCtl->fReset) ataR3DMATransferStop(s); /* This forces the loop to exit immediately. */ GCPhysDesc = pCtl->GCPhysLastDMADesc + 1; } ataR3LockLeave(pDevIns, pCtl); } ataR3LockEnter(pDevIns, pCtl); if (RT_UNLIKELY(fRedo)) return; if (fLastDesc) pCtl->BmDma.u8Status &= ~BM_STATUS_DMAING; s->cbTotalTransfer = cbTotalTransfer; s->cbElementaryTransfer = cbElementaryTransfer; s->iIOBufferCur = iIOBufferCur; s->iIOBufferEnd = iIOBufferEnd; } /** * Signal PDM that we're idle (if we actually are). * * @param pDevIns The device instance. * @param pCtl The shared controller state. * @param pCtlR3 The ring-3 controller state. */ static void ataR3AsyncSignalIdle(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, PATACONTROLLERR3 pCtlR3) { /* * Take the lock here and recheck the idle indicator to avoid * unnecessary work and racing ataR3WaitForAsyncIOIsIdle. */ int rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->AsyncIORequestLock, VINF_SUCCESS); AssertRC(rc); if ( pCtlR3->fSignalIdle && ataR3AsyncIOIsIdle(pDevIns, pCtl, false /*fStrict*/)) { PDMDevHlpAsyncNotificationCompleted(pDevIns); RTThreadUserSignal(pCtlR3->hAsyncIOThread); /* for ataR3Construct/ataR3ResetCommon. */ } rc = PDMDevHlpCritSectLeave(pDevIns, &pCtl->AsyncIORequestLock); AssertRC(rc); } /** * Async I/O thread for an interface. * * Once upon a time this was readable code with several loops and a different * semaphore for each purpose. But then came the "how can one save the state in * the middle of a PIO transfer" question. The solution was to use an ASM, * which is what's there now. */ static DECLCALLBACK(int) ataR3AsyncIOThread(RTTHREAD hThreadSelf, void *pvUser) { PATACONTROLLERR3 const pCtlR3 = (PATACONTROLLERR3)pvUser; PPDMDEVINSR3 const pDevIns = pCtlR3->pDevIns; PATASTATE const pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 const pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); uintptr_t const iCtl = pCtlR3 - &pThisCC->aCts[0]; PATACONTROLLER const pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, iCtl); int rc = VINF_SUCCESS; uint64_t u64TS = 0; /* shut up gcc */ uint64_t uWait; const ATARequest *pReq; RT_NOREF(hThreadSelf); Assert(pCtl->iCtl == pCtlR3->iCtl); pReq = NULL; pCtl->fChainedTransfer = false; while (!pCtlR3->fShutdown) { /* Keep this thread from doing anything as long as EMT is suspended. */ while (pCtl->fRedoIdle) { if (pCtlR3->fSignalIdle) ataR3AsyncSignalIdle(pDevIns, pCtl, pCtlR3); rc = RTSemEventWait(pCtlR3->hSuspendIOSem, RT_INDEFINITE_WAIT); /* Continue if we got a signal by RTThreadPoke(). * We will get notified if there is a request to process. */ if (RT_UNLIKELY(rc == VERR_INTERRUPTED)) continue; if (RT_FAILURE(rc) || pCtlR3->fShutdown) break; pCtl->fRedoIdle = false; } /* Wait for work. */ while (pReq == NULL) { if (pCtlR3->fSignalIdle) ataR3AsyncSignalIdle(pDevIns, pCtl, pCtlR3); rc = PDMDevHlpSUPSemEventWaitNoResume(pDevIns, pCtl->hAsyncIOSem, RT_INDEFINITE_WAIT); /* Continue if we got a signal by RTThreadPoke(). * We will get notified if there is a request to process. */ if (RT_UNLIKELY(rc == VERR_INTERRUPTED)) continue; if (RT_FAILURE(rc) || RT_UNLIKELY(pCtlR3->fShutdown)) break; pReq = ataR3AsyncIOGetCurrentRequest(pDevIns, pCtl); } if (RT_FAILURE(rc) || pCtlR3->fShutdown) break; if (pReq == NULL) continue; ATAAIO ReqType = pReq->ReqType; Log2(("%s: Ctl#%d: state=%d, req=%d\n", __FUNCTION__, pCtl->iCtl, pCtl->uAsyncIOState, ReqType)); if (pCtl->uAsyncIOState != ReqType) { /* The new state is not the state that was expected by the normal * state changes. This is either a RESET/ABORT or there's something * really strange going on. */ if ( (pCtl->uAsyncIOState == ATA_AIO_PIO || pCtl->uAsyncIOState == ATA_AIO_DMA) && (ReqType == ATA_AIO_PIO || ReqType == ATA_AIO_DMA)) { /* Incorrect sequence of PIO/DMA states. Dump request queue. */ ataR3AsyncIODumpRequests(pDevIns, pCtl); } AssertReleaseMsg( ReqType == ATA_AIO_RESET_ASSERTED || ReqType == ATA_AIO_RESET_CLEARED || ReqType == ATA_AIO_ABORT || pCtl->uAsyncIOState == ReqType, ("I/O state inconsistent: state=%d request=%d\n", pCtl->uAsyncIOState, ReqType)); } /* Do our work. */ ataR3LockEnter(pDevIns, pCtl); if (pCtl->uAsyncIOState == ATA_AIO_NEW && !pCtl->fChainedTransfer) { u64TS = RTTimeNanoTS(); #if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) STAM_PROFILE_ADV_START(&pCtl->StatAsyncTime, a); #endif } switch (ReqType) { case ATA_AIO_NEW: { uint8_t const iIf = pReq->u.t.iIf & ATA_SELECTED_IF_MASK; pCtl->iAIOIf = iIf; PATADEVSTATE s = &pCtl->aIfs[iIf]; PATADEVSTATER3 pDevR3 = &pCtlR3->aIfs[iIf]; s->cbTotalTransfer = pReq->u.t.cbTotalTransfer; s->uTxDir = pReq->u.t.uTxDir; s->iBeginTransfer = pReq->u.t.iBeginTransfer; s->iSourceSink = pReq->u.t.iSourceSink; s->iIOBufferEnd = 0; s->u64CmdTS = u64TS; if (s->fATAPI) { if (pCtl->fChainedTransfer) { /* Only count the actual transfers, not the PIO * transfer of the ATAPI command bytes. */ if (s->fDMA) STAM_REL_COUNTER_INC(&s->StatATAPIDMA); else STAM_REL_COUNTER_INC(&s->StatATAPIPIO); } } else { if (s->fDMA) STAM_REL_COUNTER_INC(&s->StatATADMA); else STAM_REL_COUNTER_INC(&s->StatATAPIO); } pCtl->fChainedTransfer = false; uint8_t const iBeginTransfer = s->iBeginTransfer; if ( iBeginTransfer != ATAFN_BT_NULL && iBeginTransfer < RT_ELEMENTS(g_apfnBeginTransFuncs)) { Log2(("%s: Ctl#%d: calling begin transfer function\n", __FUNCTION__, pCtl->iCtl)); g_apfnBeginTransFuncs[iBeginTransfer](pCtl, s); s->iBeginTransfer = ATAFN_BT_NULL; if (s->uTxDir != PDMMEDIATXDIR_FROM_DEVICE) s->iIOBufferEnd = s->cbElementaryTransfer; } else { Assert(iBeginTransfer == ATAFN_BT_NULL); s->cbElementaryTransfer = s->cbTotalTransfer; s->iIOBufferEnd = s->cbTotalTransfer; } s->iIOBufferCur = 0; if (s->uTxDir != PDMMEDIATXDIR_TO_DEVICE) { uint8_t const iSourceSink = s->iSourceSink; if ( iSourceSink != ATAFN_SS_NULL && iSourceSink < RT_ELEMENTS(g_apfnSourceSinkFuncs)) { bool fRedo; Log2(("%s: Ctl#%d: calling source/sink function\n", __FUNCTION__, pCtl->iCtl)); fRedo = g_apfnSourceSinkFuncs[iSourceSink](pDevIns, pCtl, s, pDevR3); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo && !pCtl->fReset)) { /* Operation failed at the initial transfer, restart * everything from scratch by resending the current * request. Occurs very rarely, not worth optimizing. */ LogRel(("%s: Ctl#%d: redo entire operation\n", __FUNCTION__, pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, pReq); break; } } else { Assert(iSourceSink == ATAFN_SS_NULL); ataR3CmdOK(pCtl, s, 0); } s->iIOBufferEnd = s->cbElementaryTransfer; } /* Do not go into the transfer phase if RESET is asserted. * The CritSect is released while waiting for the host OS * to finish the I/O, thus RESET is possible here. Most * important: do not change uAsyncIOState. */ if (pCtl->fReset) break; if (s->fDMA) { if (s->cbTotalTransfer) { ataSetStatus(pCtl, s, ATA_STAT_DRQ); pCtl->uAsyncIOState = ATA_AIO_DMA; /* If BMDMA is already started, do the transfer now. */ if (pCtl->BmDma.u8Cmd & BM_CMD_START) { Log2(("%s: Ctl#%d: message to async I/O thread, continuing DMA transfer immediately\n", __FUNCTION__, pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataDMARequest); } } else { Assert(s->uTxDir == PDMMEDIATXDIR_NONE); /* Any transfer which has an initial transfer size of 0 must be marked as such. */ /* Finish DMA transfer. */ ataR3DMATransferStop(s); ataHCSetIRQ(pDevIns, pCtl, s); pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { if (s->cbTotalTransfer) { ataHCPIOTransfer(pDevIns, pCtl); Assert(!pCtl->fRedo); if (s->fATAPITransfer || s->uTxDir != PDMMEDIATXDIR_TO_DEVICE) ataHCSetIRQ(pDevIns, pCtl, s); if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE || s->iSourceSink != ATAFN_SS_NULL) { /* Write operations and not yet finished transfers * must be completed in the async I/O thread. */ pCtl->uAsyncIOState = ATA_AIO_PIO; } else { /* Finished read operation can be handled inline * in the end of PIO transfer handling code. Linux * depends on this, as it waits only briefly for * devices to become ready after incoming data * transfer. Cannot find anything in the ATA spec * that backs this assumption, but as all kernels * are affected (though most of the time it does * not cause any harm) this must work. */ pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { Assert(s->uTxDir == PDMMEDIATXDIR_NONE); /* Any transfer which has an initial transfer size of 0 must be marked as such. */ /* Finish PIO transfer. */ ataHCPIOTransfer(pDevIns, pCtl); Assert(!pCtl->fRedo); if (!s->fATAPITransfer) ataHCSetIRQ(pDevIns, pCtl, s); pCtl->uAsyncIOState = ATA_AIO_NEW; } } break; } case ATA_AIO_DMA: { BMDMAState *bm = &pCtl->BmDma; PATADEVSTATE s = &pCtl->aIfs[pCtl->iAIOIf & ATA_SELECTED_IF_MASK]; ATAFNSS iOriginalSourceSink = (ATAFNSS)s->iSourceSink; /* Used by the hack below, but gets reset by then. */ if (s->uTxDir == PDMMEDIATXDIR_FROM_DEVICE) AssertRelease(bm->u8Cmd & BM_CMD_WRITE); else AssertRelease(!(bm->u8Cmd & BM_CMD_WRITE)); if (RT_LIKELY(!pCtl->fRedo)) { /* The specs say that the descriptor table must not cross a * 4K boundary. */ pCtl->GCPhysFirstDMADesc = bm->GCPhysAddr; pCtl->GCPhysLastDMADesc = RT_ALIGN_32(bm->GCPhysAddr + 1, _4K) - sizeof(BMDMADesc); } ataR3DMATransfer(pDevIns, pCtl, pCtlR3); if (RT_UNLIKELY(pCtl->fRedo && !pCtl->fReset)) { LogRel(("PIIX3 ATA: Ctl#%d: redo DMA operation\n", pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataDMARequest); break; } /* The infamous delay IRQ hack. */ if ( iOriginalSourceSink == ATAFN_SS_WRITE_SECTORS && s->cbTotalTransfer == 0 && pCtl->msDelayIRQ) { /* Delay IRQ for writing. Required to get the Win2K * installation work reliably (otherwise it crashes, * usually during component install). So far no better * solution has been found. */ Log(("%s: delay IRQ hack\n", __FUNCTION__)); ataR3LockLeave(pDevIns, pCtl); RTThreadSleep(pCtl->msDelayIRQ); ataR3LockEnter(pDevIns, pCtl); } ataUnsetStatus(pCtl, s, ATA_STAT_DRQ); Assert(!pCtl->fChainedTransfer); Assert(s->iSourceSink == ATAFN_SS_NULL); if (s->fATAPITransfer) { s->uATARegNSector = (s->uATARegNSector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; Log2(("%s: Ctl#%d: interrupt reason %#04x\n", __FUNCTION__, pCtl->iCtl, s->uATARegNSector)); s->fATAPITransfer = false; } ataHCSetIRQ(pDevIns, pCtl, s); pCtl->uAsyncIOState = ATA_AIO_NEW; break; } case ATA_AIO_PIO: { uint8_t const iIf = pCtl->iAIOIf & ATA_SELECTED_IF_MASK; pCtl->iAIOIf = iIf; PATADEVSTATE s = &pCtl->aIfs[iIf]; PATADEVSTATER3 pDevR3 = &pCtlR3->aIfs[iIf]; uint8_t const iSourceSink = s->iSourceSink; if ( iSourceSink != ATAFN_SS_NULL && iSourceSink < RT_ELEMENTS(g_apfnSourceSinkFuncs)) { bool fRedo; Log2(("%s: Ctl#%d: calling source/sink function\n", __FUNCTION__, pCtl->iCtl)); fRedo = g_apfnSourceSinkFuncs[iSourceSink](pDevIns, pCtl, s, pDevR3); pCtl->fRedo = fRedo; if (RT_UNLIKELY(fRedo && !pCtl->fReset)) { LogRel(("PIIX3 ATA: Ctl#%d: redo PIO operation\n", pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataPIORequest); break; } s->iIOBufferCur = 0; s->iIOBufferEnd = s->cbElementaryTransfer; } else { /* Continue a previously started transfer. */ Assert(iSourceSink == ATAFN_SS_NULL); ataUnsetStatus(pCtl, s, ATA_STAT_BUSY); ataSetStatus(pCtl, s, ATA_STAT_READY); } /* It is possible that the drives on this controller get RESET * during the above call to the source/sink function. If that's * the case, don't restart the transfer and don't finish it the * usual way. RESET handling took care of all that already. * Most important: do not change uAsyncIOState. */ if (pCtl->fReset) break; if (s->cbTotalTransfer) { ataHCPIOTransfer(pDevIns, pCtl); ataHCSetIRQ(pDevIns, pCtl, s); if (s->uTxDir == PDMMEDIATXDIR_TO_DEVICE || s->iSourceSink != ATAFN_SS_NULL) { /* Write operations and not yet finished transfers * must be completed in the async I/O thread. */ pCtl->uAsyncIOState = ATA_AIO_PIO; } else { /* Finished read operation can be handled inline * in the end of PIO transfer handling code. Linux * depends on this, as it waits only briefly for * devices to become ready after incoming data * transfer. Cannot find anything in the ATA spec * that backs this assumption, but as all kernels * are affected (though most of the time it does * not cause any harm) this must work. */ pCtl->uAsyncIOState = ATA_AIO_NEW; } } else { /* The infamous delay IRQ hack. */ if (RT_UNLIKELY(pCtl->msDelayIRQ)) { /* Various antique guests have buggy disk drivers silently * assuming that disk operations take a relatively long time. * Work around such bugs by holding off interrupts a bit. */ Log(("%s: delay IRQ hack (PIO)\n", __FUNCTION__)); ataR3LockLeave(pDevIns, pCtl); RTThreadSleep(pCtl->msDelayIRQ); ataR3LockEnter(pDevIns, pCtl); } /* Finish PIO transfer. */ ataHCPIOTransfer(pDevIns, pCtl); if ( !pCtl->fChainedTransfer && !s->fATAPITransfer && s->uTxDir != PDMMEDIATXDIR_FROM_DEVICE) { ataHCSetIRQ(pDevIns, pCtl, s); } pCtl->uAsyncIOState = ATA_AIO_NEW; } break; } case ATA_AIO_RESET_ASSERTED: pCtl->uAsyncIOState = ATA_AIO_RESET_CLEARED; ataHCPIOTransferStop(pDevIns, pCtl, &pCtl->aIfs[0]); ataHCPIOTransferStop(pDevIns, pCtl, &pCtl->aIfs[1]); /* Do not change the DMA registers, they are not affected by the * ATA controller reset logic. It should be sufficient to issue a * new command, which is now possible as the state is cleared. */ break; case ATA_AIO_RESET_CLEARED: pCtl->uAsyncIOState = ATA_AIO_NEW; pCtl->fReset = false; /* Ensure that half-completed transfers are not redone. A reset * cancels the entire transfer, so continuing is wrong. */ pCtl->fRedo = false; pCtl->fRedoDMALastDesc = false; LogRel(("PIIX3 ATA: Ctl#%d: finished processing RESET\n", pCtl->iCtl)); for (uint32_t i = 0; i < RT_ELEMENTS(pCtl->aIfs); i++) { ataR3SetSignature(&pCtl->aIfs[i]); if (pCtl->aIfs[i].fATAPI) ataSetStatusValue(pCtl, &pCtl->aIfs[i], 0); /* NOTE: READY is _not_ set */ else ataSetStatusValue(pCtl, &pCtl->aIfs[i], ATA_STAT_READY | ATA_STAT_SEEK); } break; case ATA_AIO_ABORT: { /* Abort the current command no matter what. There cannot be * any command activity on the other drive otherwise using * one thread per controller wouldn't work at all. */ PATADEVSTATE s = &pCtl->aIfs[pReq->u.a.iIf & ATA_SELECTED_IF_MASK]; pCtl->uAsyncIOState = ATA_AIO_NEW; /* Do not change the DMA registers, they are not affected by the * ATA controller reset logic. It should be sufficient to issue a * new command, which is now possible as the state is cleared. */ if (pReq->u.a.fResetDrive) { ataR3ResetDevice(pDevIns, pCtl, s); ataR3DeviceDiag(pCtl, s); } else { /* Stop any pending DMA transfer. */ s->fDMA = false; ataHCPIOTransferStop(pDevIns, pCtl, s); ataUnsetStatus(pCtl, s, ATA_STAT_BUSY | ATA_STAT_DRQ | ATA_STAT_SEEK | ATA_STAT_ERR); ataSetStatus(pCtl, s, ATA_STAT_READY); ataHCSetIRQ(pDevIns, pCtl, s); } break; } default: AssertMsgFailed(("Undefined async I/O state %d\n", pCtl->uAsyncIOState)); } ataR3AsyncIORemoveCurrentRequest(pDevIns, pCtl, ReqType); pReq = ataR3AsyncIOGetCurrentRequest(pDevIns, pCtl); if (pCtl->uAsyncIOState == ATA_AIO_NEW && !pCtl->fChainedTransfer) { # if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) STAM_PROFILE_ADV_STOP(&pCtl->StatAsyncTime, a); # endif u64TS = RTTimeNanoTS() - u64TS; uWait = u64TS / 1000; uintptr_t const iAIOIf = pCtl->iAIOIf & ATA_SELECTED_IF_MASK; Log(("%s: Ctl#%d: LUN#%d finished I/O transaction in %d microseconds\n", __FUNCTION__, pCtl->iCtl, pCtl->aIfs[iAIOIf].iLUN, (uint32_t)(uWait))); /* Mark command as finished. */ pCtl->aIfs[iAIOIf].u64CmdTS = 0; /* * Release logging of command execution times depends on the * command type. ATAPI commands often take longer (due to CD/DVD * spin up time etc.) so the threshold is different. */ if (pCtl->aIfs[iAIOIf].uATARegCommand != ATA_PACKET) { if (uWait > 8 * 1000 * 1000) { /* * Command took longer than 8 seconds. This is close * enough or over the guest's command timeout, so place * an entry in the release log to allow tracking such * timing errors (which are often caused by the host). */ LogRel(("PIIX3 ATA: execution time for ATA command %#04x was %d seconds\n", pCtl->aIfs[iAIOIf].uATARegCommand, uWait / (1000 * 1000))); } } else { if (uWait > 20 * 1000 * 1000) { /* * Command took longer than 20 seconds. This is close * enough or over the guest's command timeout, so place * an entry in the release log to allow tracking such * timing errors (which are often caused by the host). */ LogRel(("PIIX3 ATA: execution time for ATAPI command %#04x was %d seconds\n", pCtl->aIfs[iAIOIf].abATAPICmd[0], uWait / (1000 * 1000))); } } # if defined(DEBUG) || defined(VBOX_WITH_STATISTICS) if (uWait < pCtl->StatAsyncMinWait || !pCtl->StatAsyncMinWait) pCtl->StatAsyncMinWait = uWait; if (uWait > pCtl->StatAsyncMaxWait) pCtl->StatAsyncMaxWait = uWait; STAM_COUNTER_ADD(&pCtl->StatAsyncTimeUS, uWait); STAM_COUNTER_INC(&pCtl->StatAsyncOps); # endif /* DEBUG || VBOX_WITH_STATISTICS */ } ataR3LockLeave(pDevIns, pCtl); } /* Signal the ultimate idleness. */ RTThreadUserSignal(pCtlR3->hAsyncIOThread); if (pCtlR3->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pDevIns); /* Cleanup the state. */ /* Do not destroy request lock yet, still needed for proper shutdown. */ pCtlR3->fShutdown = false; Log2(("%s: Ctl#%d: return %Rrc\n", __FUNCTION__, pCtl->iCtl, rc)); return rc; } #endif /* IN_RING3 */ static uint32_t ataBMDMACmdReadB(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = pCtl->BmDma.u8Cmd; RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMACmdWriteB(PPDMDEVINS pDevIns, PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { RT_NOREF(pDevIns, addr); Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); if (!(val & BM_CMD_START)) { pCtl->BmDma.u8Status &= ~BM_STATUS_DMAING; pCtl->BmDma.u8Cmd = val & (BM_CMD_START | BM_CMD_WRITE); } else { #ifndef IN_RC /* Check whether the guest OS wants to change DMA direction in * mid-flight. Not allowed, according to the PIIX3 specs. */ Assert(!(pCtl->BmDma.u8Status & BM_STATUS_DMAING) || !((val ^ pCtl->BmDma.u8Cmd) & 0x04)); uint8_t uOldBmDmaStatus = pCtl->BmDma.u8Status; pCtl->BmDma.u8Status |= BM_STATUS_DMAING; pCtl->BmDma.u8Cmd = val & (BM_CMD_START | BM_CMD_WRITE); /* Do not continue DMA transfers while the RESET line is asserted. */ if (pCtl->fReset) { Log2(("%s: Ctl#%d: suppressed continuing DMA transfer as RESET is active\n", __FUNCTION__, pCtl->iCtl)); return; } /* Do not start DMA transfers if there's a PIO transfer going on, * or if there is already a transfer started on this controller. */ if ( !pCtl->aIfs[pCtl->iSelectedIf & ATA_SELECTED_IF_MASK].fDMA || (uOldBmDmaStatus & BM_STATUS_DMAING)) return; if (pCtl->aIfs[pCtl->iAIOIf & ATA_SELECTED_IF_MASK].uATARegStatus & ATA_STAT_DRQ) { Log2(("%s: Ctl#%d: message to async I/O thread, continuing DMA transfer\n", __FUNCTION__, pCtl->iCtl)); ataHCAsyncIOPutRequest(pDevIns, pCtl, &g_ataDMARequest); } #else /* !IN_RING3 */ AssertMsgFailed(("DMA START handling is too complicated for RC\n")); #endif /* IN_RING3 */ } } static uint32_t ataBMDMAStatusReadB(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = pCtl->BmDma.u8Status; RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMAStatusWriteB(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#04x\n", __FUNCTION__, addr, val)); pCtl->BmDma.u8Status = (val & (BM_STATUS_D0DMA | BM_STATUS_D1DMA)) | (pCtl->BmDma.u8Status & BM_STATUS_DMAING) | (pCtl->BmDma.u8Status & ~val & (BM_STATUS_ERROR | BM_STATUS_INT)); } static uint32_t ataBMDMAAddrReadL(PATACONTROLLER pCtl, uint32_t addr) { uint32_t val = (uint32_t)pCtl->BmDma.GCPhysAddr; RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); return val; } static void ataBMDMAAddrWriteL(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); pCtl->BmDma.GCPhysAddr = val & ~3; } static void ataBMDMAAddrWriteLowWord(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { RT_NOREF(addr); Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); pCtl->BmDma.GCPhysAddr = (pCtl->BmDma.GCPhysAddr & 0xFFFF0000) | RT_LOWORD(val & ~3); } static void ataBMDMAAddrWriteHighWord(PATACONTROLLER pCtl, uint32_t addr, uint32_t val) { Log2(("%s: addr=%#06x val=%#010x\n", __FUNCTION__, addr, val)); RT_NOREF(addr); pCtl->BmDma.GCPhysAddr = (RT_LOWORD(val) << 16) | RT_LOWORD(pCtl->BmDma.GCPhysAddr); } /** Helper for ataBMDMAIOPortRead and ataBMDMAIOPortWrite. */ #define VAL(port, size) ( ((port) & BM_DMA_CTL_IOPORTS_MASK) | ((size) << BM_DMA_CTL_IOPORTS_SHIFT) ) /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for bus-master DMA IN operations - both controllers.} */ static DECLCALLBACK(VBOXSTRICTRC) ataBMDMAIOPortRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (offPort >> BM_DMA_CTL_IOPORTS_SHIFT)); RT_NOREF(pvUser); VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc == VINF_SUCCESS) { switch (VAL(offPort, cb)) { case VAL(0, 1): *pu32 = ataBMDMACmdReadB(pCtl, offPort); break; case VAL(0, 2): *pu32 = ataBMDMACmdReadB(pCtl, offPort); break; case VAL(2, 1): *pu32 = ataBMDMAStatusReadB(pCtl, offPort); break; case VAL(2, 2): *pu32 = ataBMDMAStatusReadB(pCtl, offPort); break; case VAL(4, 4): *pu32 = ataBMDMAAddrReadL(pCtl, offPort); break; case VAL(0, 4): /* The SCO OpenServer tries to read 4 bytes starting from offset 0. */ *pu32 = ataBMDMACmdReadB(pCtl, offPort) | (ataBMDMAStatusReadB(pCtl, offPort) << 16); break; default: ASSERT_GUEST_MSG_FAILED(("Unsupported read from port %x size=%d\n", offPort, cb)); rc = VERR_IOM_IOPORT_UNUSED; break; } PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for bus-master DMA OUT operations - both controllers.} */ static DECLCALLBACK(VBOXSTRICTRC) ataBMDMAIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (offPort >> BM_DMA_CTL_IOPORTS_SHIFT)); RT_NOREF(pvUser); VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc == VINF_SUCCESS) { switch (VAL(offPort, cb)) { case VAL(0, 1): #ifdef IN_RC if (u32 & BM_CMD_START) { rc = VINF_IOM_R3_IOPORT_WRITE; break; } #endif ataBMDMACmdWriteB(pDevIns, pCtl, offPort, u32); break; case VAL(2, 1): ataBMDMAStatusWriteB(pCtl, offPort, u32); break; case VAL(4, 4): ataBMDMAAddrWriteL(pCtl, offPort, u32); break; case VAL(4, 2): ataBMDMAAddrWriteLowWord(pCtl, offPort, u32); break; case VAL(6, 2): ataBMDMAAddrWriteHighWord(pCtl, offPort, u32); break; default: ASSERT_GUEST_MSG_FAILED(("Unsupported write to port %x size=%d val=%x\n", offPort, cb, u32)); break; } PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } return rc; } #undef VAL #ifdef IN_RING3 /* -=-=-=-=-=- ATASTATE::IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ataR3Status_QueryInterface(PPDMIBASE pInterface, const char *pszIID) { PATASTATER3 pThisCC = RT_FROM_MEMBER(pInterface, ATASTATER3, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThisCC->ILeds); return NULL; } /* -=-=-=-=-=- ATASTATE::ILeds -=-=-=-=-=- */ /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) ataR3Status_QueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { if (iLUN < 4) { PATASTATER3 pThisCC = RT_FROM_MEMBER(pInterface, ATASTATER3, ILeds); PATASTATE pThis = PDMDEVINS_2_DATA(pThisCC->pDevIns, PATASTATE); switch (iLUN) { case 0: *ppLed = &pThis->aCts[0].aIfs[0].Led; break; case 1: *ppLed = &pThis->aCts[0].aIfs[1].Led; break; case 2: *ppLed = &pThis->aCts[1].aIfs[0].Led; break; case 3: *ppLed = &pThis->aCts[1].aIfs[1].Led; break; } Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /* -=-=-=-=-=- ATADEVSTATE::IBase -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ataR3QueryInterface(PPDMIBASE pInterface, const char *pszIID) { PATADEVSTATER3 pIfR3 = RT_FROM_MEMBER(pInterface, ATADEVSTATER3, IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pIfR3->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMEDIAPORT, &pIfR3->IPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUNTNOTIFY, &pIfR3->IMountNotify); return NULL; } /* -=-=-=-=-=- ATADEVSTATE::IPort -=-=-=-=-=- */ /** * @interface_method_impl{PDMIMEDIAPORT,pfnQueryDeviceLocation} */ static DECLCALLBACK(int) ataR3QueryDeviceLocation(PPDMIMEDIAPORT pInterface, const char **ppcszController, uint32_t *piInstance, uint32_t *piLUN) { PATADEVSTATER3 pIfR3 = RT_FROM_MEMBER(pInterface, ATADEVSTATER3, IPort); PPDMDEVINS pDevIns = pIfR3->pDevIns; AssertPtrReturn(ppcszController, VERR_INVALID_POINTER); AssertPtrReturn(piInstance, VERR_INVALID_POINTER); AssertPtrReturn(piLUN, VERR_INVALID_POINTER); *ppcszController = pDevIns->pReg->szName; *piInstance = pDevIns->iInstance; *piLUN = pIfR3->iLUN; return VINF_SUCCESS; } #endif /* IN_RING3 */ /* -=-=-=-=-=- Wrappers -=-=-=-=-=- */ /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for OUT operations on unpopulated IDE channels.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortWriteEmptyBus(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { RT_NOREF(pDevIns, pvUser, offPort, u32, cb); #ifdef VBOX_STRICT PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); Assert((uintptr_t)pvUser < 2); Assert(!pCtl->aIfs[0].fPresent && !pCtl->aIfs[1].fPresent); #endif /* This is simply a black hole, writes on unpopulated IDE channels elicit no response. */ LogFunc(("Empty bus: Ignoring write to port %x val=%x size=%d\n", offPort, u32, cb)); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMIOPORTNEWIN, * Port I/O Handler for IN operations on unpopulated IDE channels.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortReadEmptyBus(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { RT_NOREF(pDevIns, offPort, pvUser); #ifdef VBOX_STRICT PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); Assert((uintptr_t)pvUser < 2); Assert(cb <= 4); Assert(!pCtl->aIfs[0].fPresent && !pCtl->aIfs[1].fPresent); #endif /* * Reads on unpopulated IDE channels behave in a unique way. Newer ATA specifications * mandate that the host must have a pull-down resistor on signal DD7. As a consequence, * bit 7 is always read as zero. This greatly aids in ATA device detection because * the empty bus does not look to the host like a permanently busy drive, and no long * timeouts (on the order of 30 seconds) are needed. * * The response is entirely static and does not require any locking or other fancy * stuff. Breaking it out simplifies the I/O handling for non-empty IDE channels which * is quite complicated enough already. */ *pu32 = ATA_EMPTY_BUS_DATA_32 >> ((4 - cb) * 8); LogFunc(("Empty bus: port %x val=%x size=%d\n", offPort, *pu32, cb)); return VINF_SUCCESS; } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for primary port range OUT operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortWrite1Other(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); uintptr_t iCtl = (uintptr_t)pvUser % RT_ELEMENTS(pThis->aCts); PATACONTROLLER pCtl = &pThis->aCts[iCtl]; Assert((uintptr_t)pvUser < 2); VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc == VINF_SUCCESS) { /* Writes to the other command block ports should be 8-bit only. If they * are not, the high bits are simply discarded. Undocumented, but observed * on a real PIIX4 system. */ if (cb > 1) Log(("ataIOPortWrite1: suspect write to port %x val=%x size=%d\n", offPort, u32, cb)); rc = ataIOPortWriteU8(pDevIns, pCtl, offPort, u32, iCtl); PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWIN, * Port I/O Handler for primary port range IN operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortRead1Other(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); Assert((uintptr_t)pvUser < 2); VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc == VINF_SUCCESS) { /* Reads from the other command block registers should be 8-bit only. * If they are not, the low byte is propagated to the high bits. * Undocumented, but observed on a real PIIX4 system. */ rc = ataIOPortReadU8(pDevIns, pCtl, offPort, pu32); if (cb > 1) { uint32_t pad; /* Replicate the 8-bit result into the upper three bytes. */ pad = *pu32 & 0xff; pad = pad | (pad << 8); pad = pad | (pad << 16); *pu32 = pad; Log(("ataIOPortRead1: suspect read from port %x size=%d\n", offPort, cb)); } PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWOUT, * Port I/O Handler for secondary port range OUT operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortWrite2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); int rc; Assert((uintptr_t)pvUser < 2); if (cb == 1) { rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_WRITE); if (rc == VINF_SUCCESS) { rc = ataControlWrite(pDevIns, pCtl, u32, offPort); PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } } else { Log(("ataIOPortWrite2: ignoring write to port %x+%x size=%d!\n", offPort, pCtl->IOPortBase2, cb)); rc = VINF_SUCCESS; } return rc; } /** * @callback_method_impl{FNIOMIOPORTNEWIN, * Port I/O Handler for secondary port range IN operations.} * @note offPort is an absolute port number! */ static DECLCALLBACK(VBOXSTRICTRC) ataIOPortRead2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t *pu32, unsigned cb) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATACONTROLLER pCtl = &RT_SAFE_SUBSCRIPT(pThis->aCts, (uintptr_t)pvUser); int rc; Assert((uintptr_t)pvUser < 2); if (cb == 1) { rc = PDMDevHlpCritSectEnter(pDevIns, &pCtl->lock, VINF_IOM_R3_IOPORT_READ); if (rc == VINF_SUCCESS) { *pu32 = ataStatusRead(pCtl, offPort); PDMDevHlpCritSectLeave(pDevIns, &pCtl->lock); } } else { Log(("ataIOPortRead2: ignoring read from port %x+%x size=%d!\n", offPort, pCtl->IOPortBase2, cb)); rc = VERR_IOM_IOPORT_UNUSED; } return rc; } #ifdef IN_RING3 /** * Detach notification. * * The DVD drive has been unplugged. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(void) ataR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); AssertMsg(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("PIIX3IDE: Device does not support hotplugging\n")); RT_NOREF(fFlags); /* * Locate the controller and stuff. */ unsigned iController = iLUN / RT_ELEMENTS(pThis->aCts[0].aIfs); AssertReleaseMsg(iController < RT_ELEMENTS(pThis->aCts), ("iController=%d iLUN=%d\n", iController, iLUN)); PATACONTROLLER pCtl = &pThis->aCts[iController]; PATACONTROLLERR3 pCtlR3 = &pThisCC->aCts[iController]; unsigned iInterface = iLUN % RT_ELEMENTS(pThis->aCts[0].aIfs); PATADEVSTATE pIf = &pCtl->aIfs[iInterface]; PATADEVSTATER3 pIfR3 = &pCtlR3->aIfs[iInterface]; /* * Zero some important members. */ pIfR3->pDrvBase = NULL; pIfR3->pDrvMedia = NULL; pIfR3->pDrvMount = NULL; pIf->fPresent = false; /* * In case there was a medium inserted. */ ataR3MediumRemoved(pIf); } /** * Configure a LUN. * * @returns VBox status code. * @param pIf The ATA unit state, shared bits. * @param pIfR3 The ATA unit state, ring-3 bits. */ static int ataR3ConfigLun(PATADEVSTATE pIf, PATADEVSTATER3 pIfR3) { /* * Query Block, Bios and Mount interfaces. */ pIfR3->pDrvMedia = PDMIBASE_QUERY_INTERFACE(pIfR3->pDrvBase, PDMIMEDIA); if (!pIfR3->pDrvMedia) { AssertMsgFailed(("Configuration error: LUN#%d hasn't a block interface!\n", pIf->iLUN)); return VERR_PDM_MISSING_INTERFACE; } pIfR3->pDrvMount = PDMIBASE_QUERY_INTERFACE(pIfR3->pDrvBase, PDMIMOUNT); pIf->fPresent = true; /* * Validate type. */ PDMMEDIATYPE enmType = pIfR3->pDrvMedia->pfnGetType(pIfR3->pDrvMedia); if ( enmType != PDMMEDIATYPE_CDROM && enmType != PDMMEDIATYPE_DVD && enmType != PDMMEDIATYPE_HARD_DISK) { AssertMsgFailed(("Configuration error: LUN#%d isn't a disk or cd/dvd-rom. enmType=%d\n", pIf->iLUN, enmType)); return VERR_PDM_UNSUPPORTED_BLOCK_TYPE; } if ( ( enmType == PDMMEDIATYPE_DVD || enmType == PDMMEDIATYPE_CDROM) && !pIfR3->pDrvMount) { AssertMsgFailed(("Internal error: cdrom without a mountable interface, WTF???!\n")); return VERR_INTERNAL_ERROR; } pIf->fATAPI = enmType == PDMMEDIATYPE_DVD || enmType == PDMMEDIATYPE_CDROM; pIf->fATAPIPassthrough = pIf->fATAPI && pIfR3->pDrvMedia->pfnSendCmd != NULL; /* * Allocate I/O buffer. */ if (pIf->fATAPI) pIf->cbSector = 2048; /* Not required for ATAPI, one medium can have multiple sector sizes. */ else { pIf->cbSector = pIfR3->pDrvMedia->pfnGetSectorSize(pIfR3->pDrvMedia); AssertLogRelMsgReturn(pIf->cbSector > 0 && pIf->cbSector <= ATA_MAX_SECTOR_SIZE, ("Unsupported sector size on LUN#%u: %#x (%d)\n", pIf->iLUN, pIf->cbSector, pIf->cbSector), VERR_OUT_OF_RANGE); } if (pIf->cbIOBuffer) { /* Buffer is (probably) already allocated. Validate the fields, * because memory corruption can also overwrite pIf->cbIOBuffer. */ if (pIf->fATAPI) AssertLogRelReturn(pIf->cbIOBuffer == _128K, VERR_BUFFER_OVERFLOW); else AssertLogRelReturn(pIf->cbIOBuffer == ATA_MAX_MULT_SECTORS * pIf->cbSector, VERR_BUFFER_OVERFLOW); } else { if (pIf->fATAPI) pIf->cbIOBuffer = _128K; else pIf->cbIOBuffer = ATA_MAX_MULT_SECTORS * pIf->cbSector; } AssertCompile(_128K <= ATA_MAX_IO_BUFFER_SIZE); AssertCompileSize(pIf->abIOBuffer, ATA_MAX_IO_BUFFER_SIZE); AssertLogRelMsgReturn(pIf->cbIOBuffer <= ATA_MAX_IO_BUFFER_SIZE, ("LUN#%u: cbIOBuffer=%#x (%u)\n", pIf->iLUN, pIf->cbIOBuffer, pIf->cbIOBuffer), VERR_BUFFER_OVERFLOW); /* * Init geometry (only for non-CD/DVD media). */ int rc = VINF_SUCCESS; uint32_t cRegions = pIfR3->pDrvMedia->pfnGetRegionCount(pIfR3->pDrvMedia); pIf->cTotalSectors = 0; for (uint32_t i = 0; i < cRegions; i++) { uint64_t cBlocks = 0; rc = pIfR3->pDrvMedia->pfnQueryRegionProperties(pIfR3->pDrvMedia, i, NULL, &cBlocks, NULL, NULL); AssertRC(rc); pIf->cTotalSectors += cBlocks; } if (pIf->fATAPI) { pIf->PCHSGeometry.cCylinders = 0; /* dummy */ pIf->PCHSGeometry.cHeads = 0; /* dummy */ pIf->PCHSGeometry.cSectors = 0; /* dummy */ LogRel(("PIIX3 ATA: LUN#%d: CD/DVD, total number of sectors %Ld, passthrough %s\n", pIf->iLUN, pIf->cTotalSectors, (pIf->fATAPIPassthrough ? "enabled" : "disabled"))); } else { rc = pIfR3->pDrvMedia->pfnBiosGetPCHSGeometry(pIfR3->pDrvMedia, &pIf->PCHSGeometry); if (rc == VERR_PDM_MEDIA_NOT_MOUNTED) { pIf->PCHSGeometry.cCylinders = 0; pIf->PCHSGeometry.cHeads = 16; /*??*/ pIf->PCHSGeometry.cSectors = 63; /*??*/ } else if (rc == VERR_PDM_GEOMETRY_NOT_SET) { pIf->PCHSGeometry.cCylinders = 0; /* autodetect marker */ rc = VINF_SUCCESS; } AssertRC(rc); if ( pIf->PCHSGeometry.cCylinders == 0 || pIf->PCHSGeometry.cHeads == 0 || pIf->PCHSGeometry.cSectors == 0 ) { uint64_t cCylinders = pIf->cTotalSectors / (16 * 63); pIf->PCHSGeometry.cCylinders = RT_MAX(RT_MIN(cCylinders, 16383), 1); pIf->PCHSGeometry.cHeads = 16; pIf->PCHSGeometry.cSectors = 63; /* Set the disk geometry information. Ignore errors. */ pIfR3->pDrvMedia->pfnBiosSetPCHSGeometry(pIfR3->pDrvMedia, &pIf->PCHSGeometry); rc = VINF_SUCCESS; } LogRel(("PIIX3 ATA: LUN#%d: disk, PCHS=%u/%u/%u, total number of sectors %Ld\n", pIf->iLUN, pIf->PCHSGeometry.cCylinders, pIf->PCHSGeometry.cHeads, pIf->PCHSGeometry.cSectors, pIf->cTotalSectors)); if (pIfR3->pDrvMedia->pfnDiscard) LogRel(("PIIX3 ATA: LUN#%d: TRIM enabled\n", pIf->iLUN)); } /* * Check if SMP system to adjust the agressiveness of the busy yield hack (@bugref{1960}). * * The hack is an ancient (2006?) one for dealing with UNI CPU systems where EMT * would potentially monopolise the CPU and starve I/O threads. It causes the EMT to * yield it's timeslice if the guest polls the status register during I/O. On modern * multicore and multithreaded systems, yielding EMT too often may have adverse * effects (slow grub) so we aim at avoiding repeating the yield there too often. */ RTCPUID cCpus = RTMpGetOnlineCount(); if (cCpus <= 1) { pIf->cBusyStatusHackR3Rate = 1; pIf->cBusyStatusHackRZRate = 7; } else if (cCpus <= 2) { pIf->cBusyStatusHackR3Rate = 3; pIf->cBusyStatusHackRZRate = 15; } else if (cCpus <= 4) { pIf->cBusyStatusHackR3Rate = 15; pIf->cBusyStatusHackRZRate = 31; } else { pIf->cBusyStatusHackR3Rate = 127; pIf->cBusyStatusHackRZRate = 127; } return rc; } /** * Attach command. * * This is called when we change block driver for the DVD drive. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(int) ataR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG, ("PIIX3IDE: Device does not support hotplugging\n"), VERR_INVALID_PARAMETER); /* * Locate the controller and stuff. */ unsigned const iController = iLUN / RT_ELEMENTS(pThis->aCts[0].aIfs); AssertReleaseMsg(iController < RT_ELEMENTS(pThis->aCts), ("iController=%d iLUN=%d\n", iController, iLUN)); PATACONTROLLER pCtl = &pThis->aCts[iController]; PATACONTROLLERR3 pCtlR3 = &pThisCC->aCts[iController]; unsigned const iInterface = iLUN % RT_ELEMENTS(pThis->aCts[0].aIfs); PATADEVSTATE pIf = &pCtl->aIfs[iInterface]; PATADEVSTATER3 pIfR3 = &pCtlR3->aIfs[iInterface]; /* the usual paranoia */ AssertRelease(!pIfR3->pDrvBase); AssertRelease(!pIfR3->pDrvMedia); Assert(pIf->iLUN == iLUN); /* * Try attach the block device and get the interfaces, * required as well as optional. */ int rc = PDMDevHlpDriverAttach(pDevIns, pIf->iLUN, &pIfR3->IBase, &pIfR3->pDrvBase, NULL); if (RT_SUCCESS(rc)) { rc = ataR3ConfigLun(pIf, pIfR3); /* * In case there is a medium inserted. */ ataR3MediumInserted(pIf); ataR3MediumTypeSet(pIf, ATA_MEDIA_TYPE_UNKNOWN); } else AssertMsgFailed(("Failed to attach LUN#%d. rc=%Rrc\n", pIf->iLUN, rc)); if (RT_FAILURE(rc)) { pIfR3->pDrvBase = NULL; pIfR3->pDrvMedia = NULL; pIfR3->pDrvMount = NULL; pIf->fPresent = false; } return rc; } /** * Resume notification. * * @returns VBox status code. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Resume(PPDMDEVINS pDevIns) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); Log(("%s:\n", __FUNCTION__)); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].fRedo && pThis->aCts[i].fRedoIdle) { int rc = RTSemEventSignal(pThisCC->aCts[i].hSuspendIOSem); AssertRC(rc); } } return; } /** * Checks if all (both) the async I/O threads have quiesced. * * @returns true on success. * @returns false when one or more threads is still processing. * @param pDevIns Pointer to the PDM device instance. */ static bool ataR3AllAsyncIOIsIdle(PPDMDEVINS pDevIns) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) if (pThisCC->aCts[i].hAsyncIOThread != NIL_RTTHREAD) { bool fRc = ataR3AsyncIOIsIdle(pDevIns, &pThis->aCts[i], false /*fStrict*/); if (!fRc) { /* Make it signal PDM & itself when its done */ PDMDevHlpCritSectEnter(pDevIns, &pThis->aCts[i].AsyncIORequestLock, VERR_IGNORED); ASMAtomicWriteBool(&pThisCC->aCts[i].fSignalIdle, true); PDMDevHlpCritSectLeave(pDevIns, &pThis->aCts[i].AsyncIORequestLock); fRc = ataR3AsyncIOIsIdle(pDevIns, &pThis->aCts[i], false /*fStrict*/); if (!fRc) { #if 0 /** @todo Need to do some time tracking here... */ LogRel(("PIIX3 ATA: Ctl#%u is still executing, DevSel=%d AIOIf=%d CmdIf0=%#04x CmdIf1=%#04x\n", i, pThis->aCts[i].iSelectedIf, pThis->aCts[i].iAIOIf, pThis->aCts[i].aIfs[0].uATARegCommand, pThis->aCts[i].aIfs[1].uATARegCommand)); #endif return false; } } ASMAtomicWriteBool(&pThisCC->aCts[i].fSignalIdle, false); } return true; } /** * Prepare state save and load operation. * * @returns VBox status code. * @param pDevIns Device instance of the device which registered the data unit. * @param pSSM SSM operation handle. */ static DECLCALLBACK(int) ataR3SaveLoadPrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); RT_NOREF(pSSM); /* sanity - the suspend notification will wait on the async stuff. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) AssertLogRelMsgReturn(ataR3AsyncIOIsIdle(pDevIns, &pThis->aCts[i], false /*fStrict*/), ("i=%u\n", i), VERR_SSM_IDE_ASYNC_TIMEOUT); return VINF_SUCCESS; } /** * @copydoc FNSSMDEVLIVEEXEC */ static DECLCALLBACK(int) ataR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; RT_NOREF(uPass); pHlp->pfnSSMPutU8(pSSM, (uint8_t)pThis->enmChipset); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pHlp->pfnSSMPutBool(pSSM, true); /* For controller enabled / disabled. */ for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { pHlp->pfnSSMPutBool(pSSM, pThisCC->aCts[i].aIfs[j].pDrvBase != NULL); pHlp->pfnSSMPutStrZ(pSSM, pThis->aCts[i].aIfs[j].szSerialNumber); pHlp->pfnSSMPutStrZ(pSSM, pThis->aCts[i].aIfs[j].szFirmwareRevision); pHlp->pfnSSMPutStrZ(pSSM, pThis->aCts[i].aIfs[j].szModelNumber); } } return VINF_SSM_DONT_CALL_AGAIN; } /** * @copydoc FNSSMDEVSAVEEXEC */ static DECLCALLBACK(int) ataR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; ataR3LiveExec(pDevIns, pSSM, SSM_PASS_FINAL); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].iSelectedIf); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].iAIOIf); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].uAsyncIOState); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].fChainedTransfer); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].fReset); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].fRedo); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].fRedoIdle); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].fRedoDMALastDesc); pHlp->pfnSSMPutMem(pSSM, &pThis->aCts[i].BmDma, sizeof(pThis->aCts[i].BmDma)); pHlp->pfnSSMPutGCPhys32(pSSM, pThis->aCts[i].GCPhysFirstDMADesc); pHlp->pfnSSMPutGCPhys32(pSSM, pThis->aCts[i].GCPhysLastDMADesc); pHlp->pfnSSMPutGCPhys32(pSSM, pThis->aCts[i].GCPhysRedoDMABuffer); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].cbRedoDMABuffer); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].aIfs[j].fLBA48); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].aIfs[j].fATAPI); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].aIfs[j].fIrqPending); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].cMultSectors); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cCylinders); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cHeads); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].PCHSGeometry.cSectors); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].cSectorsPerIRQ); pHlp->pfnSSMPutU64(pSSM, pThis->aCts[i].aIfs[j].cTotalSectors); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegFeature); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegFeatureHOB); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegError); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegNSector); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegNSectorHOB); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSector); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSectorHOB); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegLCyl); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegLCylHOB); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegHCyl); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegHCylHOB); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegSelect); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegStatus); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegCommand); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATARegDevCtl); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uATATransferMode); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].uTxDir); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].iBeginTransfer); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].iSourceSink); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].aIfs[j].fDMA); pHlp->pfnSSMPutBool(pSSM, pThis->aCts[i].aIfs[j].fATAPITransfer); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].cbTotalTransfer); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].cbElementaryTransfer); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferCur); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferEnd); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferPIODataStart); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].iIOBufferPIODataEnd); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].iATAPILBA); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].cbATAPISector); pHlp->pfnSSMPutMem(pSSM, &pThis->aCts[i].aIfs[j].abATAPICmd, sizeof(pThis->aCts[i].aIfs[j].abATAPICmd)); pHlp->pfnSSMPutMem(pSSM, &pThis->aCts[i].aIfs[j].abATAPISense, sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); pHlp->pfnSSMPutU8(pSSM, pThis->aCts[i].aIfs[j].cNotifiedMediaChange); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].MediaEventStatus); pHlp->pfnSSMPutMem(pSSM, &pThis->aCts[i].aIfs[j].Led, sizeof(pThis->aCts[i].aIfs[j].Led)); pHlp->pfnSSMPutU32(pSSM, pThis->aCts[i].aIfs[j].cbIOBuffer); if (pThis->aCts[i].aIfs[j].cbIOBuffer) pHlp->pfnSSMPutMem(pSSM, pThis->aCts[i].aIfs[j].abIOBuffer, pThis->aCts[i].aIfs[j].cbIOBuffer); } } return pHlp->pfnSSMPutU32(pSSM, UINT32_MAX); /* sanity/terminator */ } /** * Converts the LUN number into a message string. */ static const char *ataR3StringifyLun(unsigned iLun) { switch (iLun) { case 0: return "primary master"; case 1: return "primary slave"; case 2: return "secondary master"; case 3: return "secondary slave"; default: AssertFailedReturn("unknown lun"); } } /** * FNSSMDEVLOADEXEC */ static DECLCALLBACK(int) ataR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; int rc; uint32_t u32; if ( uVersion != ATA_SAVED_STATE_VERSION && uVersion != ATA_SAVED_STATE_VERSION_VBOX_30 && uVersion != ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE && uVersion != ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS && uVersion != ATA_SAVED_STATE_VERSION_WITH_BOOL_TYPE) { AssertMsgFailed(("uVersion=%d\n", uVersion)); return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; } /* * Verify the configuration. */ if (uVersion > ATA_SAVED_STATE_VERSION_VBOX_30) { uint8_t u8Type; rc = pHlp->pfnSSMGetU8(pSSM, &u8Type); AssertRCReturn(rc, rc); if ((CHIPSET)u8Type != pThis->enmChipset) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch: enmChipset - saved=%u config=%u"), u8Type, pThis->enmChipset); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { bool fEnabled; rc = pHlp->pfnSSMGetBool(pSSM, &fEnabled); AssertRCReturn(rc, rc); if (!fEnabled) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("Ctr#%u onfig mismatch: fEnabled != true"), i); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { ATADEVSTATE const *pIf = &pThis->aCts[i].aIfs[j]; ATADEVSTATER3 const *pIfR3 = &pThisCC->aCts[i].aIfs[j]; bool fInUse; rc = pHlp->pfnSSMGetBool(pSSM, &fInUse); AssertRCReturn(rc, rc); if (fInUse != (pIfR3->pDrvBase != NULL)) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("The %s VM is missing a %s device. Please make sure the source and target VMs have compatible storage configurations"), fInUse ? "target" : "source", ataR3StringifyLun(pIf->iLUN) ); char szSerialNumber[ATA_SERIAL_NUMBER_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szSerialNumber, sizeof(szSerialNumber)); AssertRCReturn(rc, rc); if (strcmp(szSerialNumber, pIf->szSerialNumber)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Serial number - saved='%s' config='%s'\n", pIf->iLUN, szSerialNumber, pIf->szSerialNumber)); char szFirmwareRevision[ATA_FIRMWARE_REVISION_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szFirmwareRevision, sizeof(szFirmwareRevision)); AssertRCReturn(rc, rc); if (strcmp(szFirmwareRevision, pIf->szFirmwareRevision)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Firmware revision - saved='%s' config='%s'\n", pIf->iLUN, szFirmwareRevision, pIf->szFirmwareRevision)); char szModelNumber[ATA_MODEL_NUMBER_LENGTH+1]; rc = pHlp->pfnSSMGetStrZ(pSSM, szModelNumber, sizeof(szModelNumber)); AssertRCReturn(rc, rc); if (strcmp(szModelNumber, pIf->szModelNumber)) LogRel(("PIIX3 ATA: LUN#%u config mismatch: Model number - saved='%s' config='%s'\n", pIf->iLUN, szModelNumber, pIf->szModelNumber)); } } } if (uPass != SSM_PASS_FINAL) return VINF_SUCCESS; /* * Restore valid parts of the ATASTATE structure */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { /* integrity check */ if (!ataR3AsyncIOIsIdle(pDevIns, &pThis->aCts[i], false)) { AssertMsgFailed(("Async I/O for controller %d is active\n", i)); return VERR_INTERNAL_ERROR_4; } rc = pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].iSelectedIf); AssertRCReturn(rc, rc); AssertLogRelMsgStmt(pThis->aCts[i].iSelectedIf == (pThis->aCts[i].iSelectedIf & ATA_SELECTED_IF_MASK), ("iSelectedIf = %d\n", pThis->aCts[i].iSelectedIf), pThis->aCts[i].iSelectedIf &= ATA_SELECTED_IF_MASK); rc = pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].iAIOIf); AssertRCReturn(rc, rc); AssertLogRelMsgStmt(pThis->aCts[i].iAIOIf == (pThis->aCts[i].iAIOIf & ATA_SELECTED_IF_MASK), ("iAIOIf = %d\n", pThis->aCts[i].iAIOIf), pThis->aCts[i].iAIOIf &= ATA_SELECTED_IF_MASK); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].uAsyncIOState); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].fChainedTransfer); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].fReset); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].fRedo); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].fRedoIdle); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].fRedoDMALastDesc); pHlp->pfnSSMGetMem(pSSM, &pThis->aCts[i].BmDma, sizeof(pThis->aCts[i].BmDma)); pHlp->pfnSSMGetGCPhys32(pSSM, &pThis->aCts[i].GCPhysFirstDMADesc); pHlp->pfnSSMGetGCPhys32(pSSM, &pThis->aCts[i].GCPhysLastDMADesc); pHlp->pfnSSMGetGCPhys32(pSSM, &pThis->aCts[i].GCPhysRedoDMABuffer); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].cbRedoDMABuffer); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].aIfs[j].fLBA48); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].aIfs[j].fATAPI); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].aIfs[j].fIrqPending); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].cMultSectors); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cCylinders); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cHeads); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].PCHSGeometry.cSectors); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].cSectorsPerIRQ); pHlp->pfnSSMGetU64(pSSM, &pThis->aCts[i].aIfs[j].cTotalSectors); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegFeature); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegFeatureHOB); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegError); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegNSector); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegNSectorHOB); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSector); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSectorHOB); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegLCyl); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegLCylHOB); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegHCyl); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegHCylHOB); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegSelect); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegStatus); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegCommand); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATARegDevCtl); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uATATransferMode); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].uTxDir); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].iBeginTransfer); pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].iSourceSink); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].aIfs[j].fDMA); pHlp->pfnSSMGetBool(pSSM, &pThis->aCts[i].aIfs[j].fATAPITransfer); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].cbTotalTransfer); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].cbElementaryTransfer); /* NB: cbPIOTransferLimit could be saved/restored but it's sufficient * to re-calculate it here, with a tiny risk that it could be * unnecessarily low for the current transfer only. Could be changed * when changing the saved state in the future. */ pThis->aCts[i].aIfs[j].cbPIOTransferLimit = (pThis->aCts[i].aIfs[j].uATARegHCyl << 8) | pThis->aCts[i].aIfs[j].uATARegLCyl; pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferCur); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferEnd); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferPIODataStart); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].iIOBufferPIODataEnd); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].iATAPILBA); pHlp->pfnSSMGetU32(pSSM, &pThis->aCts[i].aIfs[j].cbATAPISector); pHlp->pfnSSMGetMem(pSSM, &pThis->aCts[i].aIfs[j].abATAPICmd, sizeof(pThis->aCts[i].aIfs[j].abATAPICmd)); if (uVersion > ATA_SAVED_STATE_VERSION_WITHOUT_FULL_SENSE) pHlp->pfnSSMGetMem(pSSM, pThis->aCts[i].aIfs[j].abATAPISense, sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); else { uint8_t uATAPISenseKey, uATAPIASC; memset(pThis->aCts[i].aIfs[j].abATAPISense, '\0', sizeof(pThis->aCts[i].aIfs[j].abATAPISense)); pThis->aCts[i].aIfs[j].abATAPISense[0] = 0x70 | (1 << 7); pThis->aCts[i].aIfs[j].abATAPISense[7] = 10; pHlp->pfnSSMGetU8(pSSM, &uATAPISenseKey); pHlp->pfnSSMGetU8(pSSM, &uATAPIASC); pThis->aCts[i].aIfs[j].abATAPISense[2] = uATAPISenseKey & 0x0f; pThis->aCts[i].aIfs[j].abATAPISense[12] = uATAPIASC; } /** @todo triple-check this hack after passthrough is working */ pHlp->pfnSSMGetU8(pSSM, &pThis->aCts[i].aIfs[j].cNotifiedMediaChange); if (uVersion > ATA_SAVED_STATE_VERSION_WITHOUT_EVENT_STATUS) pHlp->pfnSSMGetU32V(pSSM, &pThis->aCts[i].aIfs[j].MediaEventStatus); else pThis->aCts[i].aIfs[j].MediaEventStatus = ATA_EVENT_STATUS_UNCHANGED; pHlp->pfnSSMGetMem(pSSM, &pThis->aCts[i].aIfs[j].Led, sizeof(pThis->aCts[i].aIfs[j].Led)); uint32_t cbIOBuffer = 0; rc = pHlp->pfnSSMGetU32(pSSM, &cbIOBuffer); AssertRCReturn(rc, rc); if (cbIOBuffer) { if (cbIOBuffer <= sizeof(pThis->aCts[i].aIfs[j].abIOBuffer)) { if (pThis->aCts[i].aIfs[j].cbIOBuffer != cbIOBuffer) LogRel(("ATA: %u/%u: Restoring cbIOBuffer=%u; constructor set up %u!\n", i, j, cbIOBuffer, pThis->aCts[i].aIfs[j].cbIOBuffer)); pThis->aCts[i].aIfs[j].cbIOBuffer = cbIOBuffer; pHlp->pfnSSMGetMem(pSSM, pThis->aCts[i].aIfs[j].abIOBuffer, cbIOBuffer); } else { LogRel(("ATA: %u/%u: Restoring cbIOBuffer=%u, only prepared %u!\n", i, j, cbIOBuffer, pThis->aCts[i].aIfs[j].cbIOBuffer)); if (pHlp->pfnSSMHandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT) return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("ATA: %u/%u: Restoring cbIOBuffer=%u, only prepared %u"), i, j, cbIOBuffer, pThis->aCts[i].aIfs[j].cbIOBuffer); /* skip the buffer if we're loading for the debugger / animator. */ pHlp->pfnSSMSkip(pSSM, cbIOBuffer); } } else AssertLogRelMsgStmt(pThis->aCts[i].aIfs[j].cbIOBuffer == 0, ("ATA: %u/%u: cbIOBuffer=%u restoring zero!\n", i, j, pThis->aCts[i].aIfs[j].cbIOBuffer), pThis->aCts[i].aIfs[j].cbIOBuffer = 0); } } if (uVersion <= ATA_SAVED_STATE_VERSION_VBOX_30) PDMDEVHLP_SSM_GET_ENUM8_RET(pHlp, pSSM, pThis->enmChipset, CHIPSET); rc = pHlp->pfnSSMGetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; if (u32 != ~0U) { AssertMsgFailed(("u32=%#x expected ~0\n", u32)); rc = VERR_SSM_DATA_UNIT_FORMAT_CHANGED; return rc; } return VINF_SUCCESS; } /** * Callback employed by ataSuspend and ataR3PowerOff. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ataR3IsAsyncSuspendOrPowerOffDone(PPDMDEVINS pDevIns) { return ataR3AllAsyncIOIsIdle(pDevIns); } /** * Common worker for ataSuspend and ataR3PowerOff. */ static void ataR3SuspendOrPowerOff(PPDMDEVINS pDevIns) { if (!ataR3AllAsyncIOIsIdle(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ataR3IsAsyncSuspendOrPowerOffDone); } /** * Power Off notification. * * @returns VBox status code. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3PowerOff(PPDMDEVINS pDevIns) { Log(("%s:\n", __FUNCTION__)); ataR3SuspendOrPowerOff(pDevIns); } /** * Suspend notification. * * @returns VBox status code. * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Suspend(PPDMDEVINS pDevIns) { Log(("%s:\n", __FUNCTION__)); ataR3SuspendOrPowerOff(pDevIns); } /** * Callback employed by ataR3Reset. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ataR3IsAsyncResetDone(PPDMDEVINS pDevIns) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); if (!ataR3AllAsyncIOIsIdle(pDevIns)) return false; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PDMDevHlpCritSectEnter(pDevIns, &pThis->aCts[i].lock, VERR_INTERNAL_ERROR); for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) ataR3ResetDevice(pDevIns, &pThis->aCts[i], &pThis->aCts[i].aIfs[j]); PDMDevHlpCritSectLeave(pDevIns, &pThis->aCts[i].lock); } return true; } /** * Common reset worker for ataR3Reset and ataR3Construct. * * @returns VBox status code. * @param pDevIns The device instance data. * @param fConstruct Indicates who is calling. */ static int ataR3ResetCommon(PPDMDEVINS pDevIns, bool fConstruct) { PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PDMDevHlpCritSectEnter(pDevIns, &pThis->aCts[i].lock, VERR_INTERNAL_ERROR); pThis->aCts[i].iSelectedIf = 0; pThis->aCts[i].iAIOIf = 0; pThis->aCts[i].BmDma.u8Cmd = 0; /* Report that both drives present on the bus are in DMA mode. This * pretends that there is a BIOS that has set it up. Normal reset * default is 0x00. */ pThis->aCts[i].BmDma.u8Status = (pThisCC->aCts[i].aIfs[0].pDrvBase != NULL ? BM_STATUS_D0DMA : 0) | (pThisCC->aCts[i].aIfs[1].pDrvBase != NULL ? BM_STATUS_D1DMA : 0); pThis->aCts[i].BmDma.GCPhysAddr = 0; pThis->aCts[i].fReset = true; pThis->aCts[i].fRedo = false; pThis->aCts[i].fRedoIdle = false; ataR3AsyncIOClearRequests(pDevIns, &pThis->aCts[i]); Log2(("%s: Ctl#%d: message to async I/O thread, reset controller\n", __FUNCTION__, i)); ataHCAsyncIOPutRequest(pDevIns, &pThis->aCts[i], &g_ataResetARequest); ataHCAsyncIOPutRequest(pDevIns, &pThis->aCts[i], &g_ataResetCRequest); PDMDevHlpCritSectLeave(pDevIns, &pThis->aCts[i].lock); } int rcRet = VINF_SUCCESS; if (!fConstruct) { /* * Setup asynchronous notification completion if the requests haven't * completed yet. */ if (!ataR3IsAsyncResetDone(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ataR3IsAsyncResetDone); } else { /* * Wait for the requests for complete. * * Would be real nice if we could do it all from EMT(0) and not * involve the worker threads, then we could dispense with all the * waiting and semaphore ping-pong here... */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThisCC->aCts[i].hAsyncIOThread != NIL_RTTHREAD) { int rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->aCts[i].AsyncIORequestLock, VERR_IGNORED); AssertRC(rc); ASMAtomicWriteBool(&pThisCC->aCts[i].fSignalIdle, true); rc = RTThreadUserReset(pThisCC->aCts[i].hAsyncIOThread); AssertRC(rc); rc = PDMDevHlpCritSectLeave(pDevIns, &pThis->aCts[i].AsyncIORequestLock); AssertRC(rc); if (!ataR3AsyncIOIsIdle(pDevIns, &pThis->aCts[i], false /*fStrict*/)) { rc = RTThreadUserWait(pThisCC->aCts[i].hAsyncIOThread, 30*1000 /*ms*/); if (RT_FAILURE(rc)) rc = RTThreadUserWait(pThisCC->aCts[i].hAsyncIOThread, 1000 /*ms*/); if (RT_FAILURE(rc)) { AssertRC(rc); rcRet = rc; } } } ASMAtomicWriteBool(&pThisCC->aCts[i].fSignalIdle, false); } if (RT_SUCCESS(rcRet)) { rcRet = ataR3IsAsyncResetDone(pDevIns) ? VINF_SUCCESS : VERR_INTERNAL_ERROR; AssertRC(rcRet); } } return rcRet; } /** * Reset notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ataR3Reset(PPDMDEVINS pDevIns) { ataR3ResetCommon(pDevIns, false /*fConstruct*/); } /** * Destroy a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDevIns The device instance data. */ static DECLCALLBACK(int) ataR3Destruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATECC); int rc; Log(("ataR3Destruct\n")); /* * Tell the async I/O threads to terminate. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThisCC->aCts[i].hAsyncIOThread != NIL_RTTHREAD) { ASMAtomicWriteU32(&pThisCC->aCts[i].fShutdown, true); rc = PDMDevHlpSUPSemEventSignal(pDevIns, pThis->aCts[i].hAsyncIOSem); AssertRC(rc); rc = RTSemEventSignal(pThisCC->aCts[i].hSuspendIOSem); AssertRC(rc); } } /* * Wait for the threads to terminate before destroying their resources. */ for (unsigned i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThisCC->aCts[i].hAsyncIOThread != NIL_RTTHREAD) { rc = RTThreadWait(pThisCC->aCts[i].hAsyncIOThread, 30000 /* 30 s*/, NULL); if (RT_SUCCESS(rc)) pThisCC->aCts[i].hAsyncIOThread = NIL_RTTHREAD; else LogRel(("PIIX3 ATA Dtor: Ctl#%u is still executing, DevSel=%d AIOIf=%d CmdIf0=%#04x CmdIf1=%#04x rc=%Rrc\n", i, pThis->aCts[i].iSelectedIf, pThis->aCts[i].iAIOIf, pThis->aCts[i].aIfs[0].uATARegCommand, pThis->aCts[i].aIfs[1].uATARegCommand, rc)); } } /* * Free resources. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (PDMDevHlpCritSectIsInitialized(pDevIns, &pThis->aCts[i].AsyncIORequestLock)) PDMDevHlpCritSectDelete(pDevIns, &pThis->aCts[i].AsyncIORequestLock); if (pThis->aCts[i].hAsyncIOSem != NIL_SUPSEMEVENT) { PDMDevHlpSUPSemEventClose(pDevIns, pThis->aCts[i].hAsyncIOSem); pThis->aCts[i].hAsyncIOSem = NIL_SUPSEMEVENT; } if (pThisCC->aCts[i].hSuspendIOSem != NIL_RTSEMEVENT) { RTSemEventDestroy(pThisCC->aCts[i].hSuspendIOSem); pThisCC->aCts[i].hSuspendIOSem = NIL_RTSEMEVENT; } /* try one final time */ if (pThisCC->aCts[i].hAsyncIOThread != NIL_RTTHREAD) { rc = RTThreadWait(pThisCC->aCts[i].hAsyncIOThread, 1 /*ms*/, NULL); if (RT_SUCCESS(rc)) { pThisCC->aCts[i].hAsyncIOThread = NIL_RTTHREAD; LogRel(("PIIX3 ATA Dtor: Ctl#%u actually completed.\n", i)); } } for (uint32_t iIf = 0; iIf < RT_ELEMENTS(pThis->aCts[i].aIfs); iIf++) { if (pThisCC->aCts[i].aIfs[iIf].pTrackList) { ATAPIPassthroughTrackListDestroy(pThisCC->aCts[i].aIfs[iIf].pTrackList); pThisCC->aCts[i].aIfs[iIf].pTrackList = NULL; } } } return VINF_SUCCESS; } /** * Convert config value to DEVPCBIOSBOOT. * * @returns VBox status code. * @param pDevIns The device instance data. * @param pCfg Configuration handle. * @param penmChipset Where to store the chipset type. */ static int ataR3ControllerFromCfg(PPDMDEVINS pDevIns, PCFGMNODE pCfg, CHIPSET *penmChipset) { char szType[20]; int rc = pDevIns->pHlpR3->pfnCFGMQueryStringDef(pCfg, "Type", &szType[0], sizeof(szType), "PIIX4"); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Configuration error: Querying \"Type\" as a string failed")); if (!strcmp(szType, "PIIX3")) *penmChipset = CHIPSET_PIIX3; else if (!strcmp(szType, "PIIX4")) *penmChipset = CHIPSET_PIIX4; else if (!strcmp(szType, "ICH6")) *penmChipset = CHIPSET_ICH6; else { PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("Configuration error: The \"Type\" value \"%s\" is unknown"), szType); rc = VERR_INTERNAL_ERROR; } return rc; } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) ataR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); PATASTATER3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PATASTATER3); PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3; PPDMIBASE pBase; int rc; uint32_t msDelayIRQ; Assert(iInstance == 0); /* * Initialize NIL handle values (for the destructor). */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pThis->aCts[i].iCtl = i; pThis->aCts[i].hAsyncIOSem = NIL_SUPSEMEVENT; pThis->aCts[i].hIoPorts1First = NIL_IOMIOPORTHANDLE; pThis->aCts[i].hIoPorts1Other = NIL_IOMIOPORTHANDLE; pThis->aCts[i].hIoPorts2 = NIL_IOMIOPORTHANDLE; pThis->aCts[i].hIoPortsEmpty1 = NIL_IOMIOPORTHANDLE; pThis->aCts[i].hIoPortsEmpty2 = NIL_IOMIOPORTHANDLE; pThisCC->aCts[i].iCtl = i; pThisCC->aCts[i].hSuspendIOSem = NIL_RTSEMEVENT; pThisCC->aCts[i].hAsyncIOThread = NIL_RTTHREAD; } /* * Validate and read configuration. */ PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "IRQDelay|Type", "PrimaryMaster|PrimarySlave|SecondaryMaster|SecondarySlave"); rc = pHlp->pfnCFGMQueryU32Def(pCfg, "IRQDelay", &msDelayIRQ, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read IRQDelay as integer")); Log(("%s: msDelayIRQ=%d\n", __FUNCTION__, msDelayIRQ)); Assert(msDelayIRQ < 50); CHIPSET enmChipset = CHIPSET_PIIX3; rc = ataR3ControllerFromCfg(pDevIns, pCfg, &enmChipset); if (RT_FAILURE(rc)) return rc; pThis->enmChipset = enmChipset; /* * Initialize data (most of it anyway). */ /* Status LUN. */ pThisCC->IBase.pfnQueryInterface = ataR3Status_QueryInterface; pThisCC->ILeds.pfnQueryStatusLed = ataR3Status_QueryStatusLed; /* PCI configuration space. */ PPDMPCIDEV pPciDev = pDevIns->apPciDevs[0]; PDMPCIDEV_ASSERT_VALID(pDevIns, pPciDev); PDMPciDevSetVendorId(pPciDev, 0x8086); /* Intel */ /* * When adding more IDE chipsets, don't forget to update pci_bios_init_device() * as it explicitly checks for PCI id for IDE controllers. */ switch (enmChipset) { case CHIPSET_ICH6: PDMPciDevSetDeviceId(pPciDev, 0x269e); /* ICH6 IDE */ /** @todo do we need it? Do we need anything else? */ PDMPciDevSetByte(pPciDev, 0x48, 0x00); /* UDMACTL */ PDMPciDevSetByte(pPciDev, 0x4A, 0x00); /* UDMATIM */ PDMPciDevSetByte(pPciDev, 0x4B, 0x00); { /* * See www.intel.com/Assets/PDF/manual/298600.pdf p. 30 * Report * WR_Ping-Pong_EN: must be set * PCR0, PCR1: 80-pin primary cable reporting for both disks * SCR0, SCR1: 80-pin secondary cable reporting for both disks */ uint16_t u16Config = (1<<10) | (1<<7) | (1<<6) | (1<<5) | (1<<4); PDMPciDevSetByte(pPciDev, 0x54, u16Config & 0xff); PDMPciDevSetByte(pPciDev, 0x55, u16Config >> 8); } break; case CHIPSET_PIIX4: PDMPciDevSetDeviceId(pPciDev, 0x7111); /* PIIX4 IDE */ PDMPciDevSetRevisionId(pPciDev, 0x01); /* PIIX4E */ PDMPciDevSetByte(pPciDev, 0x48, 0x00); /* UDMACTL */ PDMPciDevSetByte(pPciDev, 0x4A, 0x00); /* UDMATIM */ PDMPciDevSetByte(pPciDev, 0x4B, 0x00); break; case CHIPSET_PIIX3: PDMPciDevSetDeviceId(pPciDev, 0x7010); /* PIIX3 IDE */ break; default: AssertMsgFailed(("Unsupported IDE chipset type: %d\n", enmChipset)); } /** @todo * This is the job of the BIOS / EFI! * * The same is done in DevPCI.cpp / pci_bios_init_device() but there is no * corresponding function in DevPciIch9.cpp. The EFI has corresponding code * in OvmfPkg/Library/PlatformBdsLib/BdsPlatform.c: NotifyDev() but this * function assumes that the IDE controller is located at PCI 00:01.1 which * is not true if the ICH9 chipset is used. */ PDMPciDevSetWord(pPciDev, 0x40, 0x8000); /* enable IDE0 */ PDMPciDevSetWord(pPciDev, 0x42, 0x8000); /* enable IDE1 */ PDMPciDevSetCommand( pPciDev, PCI_COMMAND_IOACCESS | PCI_COMMAND_MEMACCESS | PCI_COMMAND_BUSMASTER); PDMPciDevSetClassProg( pPciDev, 0x8a); /* programming interface = PCI_IDE bus-master is supported */ PDMPciDevSetClassSub( pPciDev, 0x01); /* class_sub = PCI_IDE */ PDMPciDevSetClassBase( pPciDev, 0x01); /* class_base = PCI_mass_storage */ PDMPciDevSetHeaderType(pPciDev, 0x00); pThisCC->pDevIns = pDevIns; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { pThisCC->aCts[i].pDevIns = pDevIns; pThisCC->aCts[i].iCtl = i; pThis->aCts[i].iCtl = i; pThis->aCts[i].msDelayIRQ = msDelayIRQ; for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { PATADEVSTATE pIf = &pThis->aCts[i].aIfs[j]; PATADEVSTATER3 pIfR3 = &pThisCC->aCts[i].aIfs[j]; pIfR3->iLUN = pIf->iLUN = i * RT_ELEMENTS(pThis->aCts) + j; pIfR3->iCtl = pIf->iCtl = i; pIfR3->iDev = pIf->iDev = j; pIfR3->pDevIns = pDevIns; pIfR3->IBase.pfnQueryInterface = ataR3QueryInterface; pIfR3->IMountNotify.pfnMountNotify = ataR3MountNotify; pIfR3->IMountNotify.pfnUnmountNotify = ataR3UnmountNotify; pIfR3->IPort.pfnQueryDeviceLocation = ataR3QueryDeviceLocation; pIf->Led.u32Magic = PDMLED_MAGIC; } } Assert(RT_ELEMENTS(pThis->aCts) == 2); pThis->aCts[0].irq = 14; pThis->aCts[0].IOPortBase1 = 0x1f0; pThis->aCts[0].IOPortBase2 = 0x3f6; pThis->aCts[1].irq = 15; pThis->aCts[1].IOPortBase1 = 0x170; pThis->aCts[1].IOPortBase2 = 0x376; /* * Set the default critical section to NOP as we lock on controller level. */ rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); /* * Register the PCI device. */ rc = PDMDevHlpPCIRegisterEx(pDevIns, pPciDev, PDMPCIDEVREG_F_NOT_MANDATORY_NO, 1 /*uPciDevNo*/, 1 /*uPciDevFn*/, "piix3ide"); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register PCI device")); /* Region #4: I/O ports for the two bus-master DMA controllers. */ rc = PDMDevHlpPCIIORegionCreateIo(pDevIns, 4 /*iPciRegion*/, 0x10 /*cPorts*/, ataBMDMAIOPortWrite, ataBMDMAIOPortRead, NULL /*pvUser*/, "ATA Bus Master DMA", NULL /*paExtDescs*/, &pThis->hIoPortsBmDma); AssertRCReturn(rc, rc); /* * Register stats, create critical sections. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { for (uint32_t j = 0; j < RT_ELEMENTS(pThis->aCts[i].aIfs); j++) { PATADEVSTATE pIf = &pThis->aCts[i].aIfs[j]; PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATADMA, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATA DMA transfers.", "/Devices/IDE%d/ATA%d/Unit%d/DMA", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIO, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATA PIO transfers.", "/Devices/IDE%d/ATA%d/Unit%d/PIO", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIDMA, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATAPI DMA transfers.", "/Devices/IDE%d/ATA%d/Unit%d/AtapiDMA", iInstance, i, j); PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatATAPIPIO, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of ATAPI PIO transfers.", "/Devices/IDE%d/ATA%d/Unit%d/AtapiPIO", iInstance, i, j); #ifdef VBOX_WITH_STATISTICS /** @todo release too. */ PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatReads, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the read operations.", "/Devices/IDE%d/ATA%d/Unit%d/Reads", iInstance, i, j); #endif PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatBytesRead, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data read.", "/Devices/IDE%d/ATA%d/Unit%d/ReadBytes", iInstance, i, j); #ifdef VBOX_INSTRUMENT_DMA_WRITES PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatInstrVDWrites,STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the VD DMA write operations.", "/Devices/IDE%d/ATA%d/Unit%d/InstrVDWrites", iInstance, i, j); #endif #ifdef VBOX_WITH_STATISTICS PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatWrites, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the write operations.", "/Devices/IDE%d/ATA%d/Unit%d/Writes", iInstance, i, j); #endif PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatBytesWritten, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data written.", "/Devices/IDE%d/ATA%d/Unit%d/WrittenBytes", iInstance, i, j); #ifdef VBOX_WITH_STATISTICS PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatFlushes, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of the flush operations.", "/Devices/IDE%d/ATA%d/Unit%d/Flushes", iInstance, i, j); #endif PDMDevHlpSTAMRegisterF(pDevIns, &pIf->StatStatusYields, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of status polling yields.", "/Devices/IDE%d/ATA%d/Unit%d/StatusYields", iInstance, i, j); } #ifdef VBOX_WITH_STATISTICS /** @todo release too. */ PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncOps, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "The number of async operations.", "/Devices/IDE%d/ATA%d/Async/Operations", iInstance, i); /** @todo STAMUNIT_MICROSECS */ PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncMinWait, STAMTYPE_U64_RESET, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Minimum wait in microseconds.", "/Devices/IDE%d/ATA%d/Async/MinWait", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncMaxWait, STAMTYPE_U64_RESET, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Maximum wait in microseconds.", "/Devices/IDE%d/ATA%d/Async/MaxWait", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncTimeUS, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_NONE, "Total time spent in microseconds.", "/Devices/IDE%d/ATA%d/Async/TotalTimeUS", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatAsyncTime, STAMTYPE_PROFILE_ADV, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of async operations.", "/Devices/IDE%d/ATA%d/Async/Time", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pThis->aCts[i].StatLockWait, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_TICKS_PER_CALL, "Profiling of locks.", "/Devices/IDE%d/ATA%d/Async/LockWait", iInstance, i); #endif /* VBOX_WITH_STATISTICS */ /* Initialize per-controller critical section. */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->aCts[i].lock, RT_SRC_POS, "ATA#%u-Ctl", i); AssertLogRelRCReturn(rc, rc); /* Initialize per-controller async I/O request critical section. */ rc = PDMDevHlpCritSectInit(pDevIns, &pThis->aCts[i].AsyncIORequestLock, RT_SRC_POS, "ATA#%u-Req", i); AssertLogRelRCReturn(rc, rc); } /* * Attach status driver (optional). */ rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThisCC->IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) { pThisCC->pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); pThisCC->pMediaNotify = PDMIBASE_QUERY_INTERFACE(pBase, PDMIMEDIANOTIFY); } else if (rc != VERR_PDM_NO_ATTACHED_DRIVER) { AssertMsgFailed(("Failed to attach to status driver. rc=%Rrc\n", rc)); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot attach to status driver")); } /* * Attach the units. */ uint32_t cbTotalBuffer = 0; for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PATACONTROLLER pCtl = &pThis->aCts[i]; PATACONTROLLERR3 pCtlR3 = &pThisCC->aCts[i]; /* * Start the worker thread. */ pCtl->uAsyncIOState = ATA_AIO_NEW; rc = PDMDevHlpSUPSemEventCreate(pDevIns, &pCtl->hAsyncIOSem); AssertLogRelRCReturn(rc, rc); rc = RTSemEventCreate(&pCtlR3->hSuspendIOSem); AssertLogRelRCReturn(rc, rc); ataR3AsyncIOClearRequests(pDevIns, pCtl); rc = RTThreadCreateF(&pCtlR3->hAsyncIOThread, ataR3AsyncIOThread, pCtlR3, 0, RTTHREADTYPE_IO, RTTHREADFLAGS_WAITABLE, "ATA-%u", i); AssertLogRelRCReturn(rc, rc); Assert( pCtlR3->hAsyncIOThread != NIL_RTTHREAD && pCtl->hAsyncIOSem != NIL_SUPSEMEVENT && pCtlR3->hSuspendIOSem != NIL_RTSEMEVENT && PDMDevHlpCritSectIsInitialized(pDevIns, &pCtl->AsyncIORequestLock)); Log(("%s: controller %d AIO thread id %#x; sem %p susp_sem %p\n", __FUNCTION__, i, pCtlR3->hAsyncIOThread, pCtl->hAsyncIOSem, pCtlR3->hSuspendIOSem)); for (uint32_t j = 0; j < RT_ELEMENTS(pCtl->aIfs); j++) { static const char *s_apszDescs[RT_ELEMENTS(pThis->aCts)][RT_ELEMENTS(pCtl->aIfs)] = { { "Primary Master", "Primary Slave" }, { "Secondary Master", "Secondary Slave" } }; /* * Try attach the block device and get the interfaces, * required as well as optional. */ PATADEVSTATE pIf = &pCtl->aIfs[j]; PATADEVSTATER3 pIfR3 = &pCtlR3->aIfs[j]; rc = PDMDevHlpDriverAttach(pDevIns, pIf->iLUN, &pIfR3->IBase, &pIfR3->pDrvBase, s_apszDescs[i][j]); if (RT_SUCCESS(rc)) { rc = ataR3ConfigLun(pIf, pIfR3); if (RT_SUCCESS(rc)) { /* * Init vendor product data. */ static const char *s_apszCFGMKeys[RT_ELEMENTS(pThis->aCts)][RT_ELEMENTS(pCtl->aIfs)] = { { "PrimaryMaster", "PrimarySlave" }, { "SecondaryMaster", "SecondarySlave" } }; /* Generate a default serial number. */ char szSerial[ATA_SERIAL_NUMBER_LENGTH+1]; RTUUID Uuid; if (pIfR3->pDrvMedia) rc = pIfR3->pDrvMedia->pfnGetUuid(pIfR3->pDrvMedia, &Uuid); else RTUuidClear(&Uuid); if (RT_FAILURE(rc) || RTUuidIsNull(&Uuid)) { /* Generate a predictable serial for drives which don't have a UUID. */ RTStrPrintf(szSerial, sizeof(szSerial), "VB%x-%04x%04x", pIf->iLUN + pDevIns->iInstance * 32, pThis->aCts[i].IOPortBase1, pThis->aCts[i].IOPortBase2); } else RTStrPrintf(szSerial, sizeof(szSerial), "VB%08x-%08x", Uuid.au32[0], Uuid.au32[3]); /* Get user config if present using defaults otherwise. */ PCFGMNODE pCfgNode = pHlp->pfnCFGMGetChild(pCfg, s_apszCFGMKeys[i][j]); rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "SerialNumber", pIf->szSerialNumber, sizeof(pIf->szSerialNumber), szSerial); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"SerialNumber\" is longer than 20 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"SerialNumber\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "FirmwareRevision", pIf->szFirmwareRevision, sizeof(pIf->szFirmwareRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"FirmwareRevision\" is longer than 8 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"FirmwareRevision\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ModelNumber", pIf->szModelNumber, sizeof(pIf->szModelNumber), pIf->fATAPI ? "VBOX CD-ROM" : "VBOX HARDDISK"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ModelNumber\" is longer than 40 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ModelNumber\" as string")); } /* There are three other identification strings for CD drives used for INQUIRY */ if (pIf->fATAPI) { rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIVendorId", pIf->szInquiryVendorId, sizeof(pIf->szInquiryVendorId), "VBOX"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIVendorId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIVendorId\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIProductId", pIf->szInquiryProductId, sizeof(pIf->szInquiryProductId), "CD-ROM"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIProductId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIProductId\" as string")); } rc = pHlp->pfnCFGMQueryStringDef(pCfgNode, "ATAPIRevision", pIf->szInquiryRevision, sizeof(pIf->szInquiryRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIRevision\" is longer than 4 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIRevision\" as string")); } rc = pHlp->pfnCFGMQueryBoolDef(pCfgNode, "OverwriteInquiry", &pIf->fOverwriteInquiry, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"OverwriteInquiry\" as boolean")); } } } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pIfR3->pDrvBase = NULL; pIfR3->pDrvMedia = NULL; pIf->cbIOBuffer = 0; pIf->fPresent = false; LogRel(("PIIX3 ATA: LUN#%d: no unit\n", pIf->iLUN)); } else { switch (rc) { case VERR_ACCESS_DENIED: /* Error already cached by DrvHostBase */ return rc; default: return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("PIIX3 cannot attach drive to the %s"), s_apszDescs[i][j]); } } cbTotalBuffer += pIf->cbIOBuffer; } } /* * Register the I/O ports. * The ports are all hardcoded and enforced by the PIIX3 host bridge controller. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { Assert(pThis->aCts[i].aIfs[0].fPresent == (pThisCC->aCts[i].aIfs[0].pDrvMedia != NULL)); Assert(pThis->aCts[i].aIfs[1].fPresent == (pThisCC->aCts[i].aIfs[1].pDrvMedia != NULL)); if (!pThisCC->aCts[i].aIfs[0].pDrvMedia && !pThisCC->aCts[i].aIfs[1].pDrvMedia) { /* No device present on this ATA bus; requires special handling. */ rc = PDMDevHlpIoPortCreateExAndMap(pDevIns, pThis->aCts[i].IOPortBase1, 8 /*cPorts*/, IOM_IOPORT_F_ABS, ataIOPortWriteEmptyBus, ataIOPortReadEmptyBus, NULL, NULL, (RTHCPTR)(uintptr_t)i, "ATA I/O Base 1 - Empty Bus", NULL /*paExtDescs*/, &pThis->aCts[i].hIoPortsEmpty1); AssertLogRelRCReturn(rc, rc); rc = PDMDevHlpIoPortCreateExAndMap(pDevIns, pThis->aCts[i].IOPortBase2, 1 /*cPorts*/, IOM_IOPORT_F_ABS, ataIOPortWriteEmptyBus, ataIOPortReadEmptyBus, NULL, NULL, (RTHCPTR)(uintptr_t)i, "ATA I/O Base 2 - Empty Bus", NULL /*paExtDescs*/, &pThis->aCts[i].hIoPortsEmpty2); AssertLogRelRCReturn(rc, rc); } else { /* At least one device present, register regular handlers. */ rc = PDMDevHlpIoPortCreateExAndMap(pDevIns, pThis->aCts[i].IOPortBase1, 1 /*cPorts*/, IOM_IOPORT_F_ABS, ataIOPortWrite1Data, ataIOPortRead1Data, ataIOPortWriteStr1Data, ataIOPortReadStr1Data, (RTHCPTR)(uintptr_t)i, "ATA I/O Base 1 - Data", NULL /*paExtDescs*/, &pThis->aCts[i].hIoPorts1First); AssertLogRelRCReturn(rc, rc); rc = PDMDevHlpIoPortCreateExAndMap(pDevIns, pThis->aCts[i].IOPortBase1 + 1, 7 /*cPorts*/, IOM_IOPORT_F_ABS, ataIOPortWrite1Other, ataIOPortRead1Other, NULL, NULL, (RTHCPTR)(uintptr_t)i, "ATA I/O Base 1 - Other", NULL /*paExtDescs*/, &pThis->aCts[i].hIoPorts1Other); AssertLogRelRCReturn(rc, rc); rc = PDMDevHlpIoPortCreateExAndMap(pDevIns, pThis->aCts[i].IOPortBase2, 1 /*cPorts*/, IOM_IOPORT_F_ABS, ataIOPortWrite2, ataIOPortRead2, NULL, NULL, (RTHCPTR)(uintptr_t)i, "ATA I/O Base 2", NULL /*paExtDescs*/, &pThis->aCts[i].hIoPorts2); AssertLogRelRCReturn(rc, rc); } } rc = PDMDevHlpSSMRegisterEx(pDevIns, ATA_SAVED_STATE_VERSION, sizeof(*pThis) + cbTotalBuffer, NULL, NULL, ataR3LiveExec, NULL, ataR3SaveLoadPrep, ataR3SaveExec, NULL, ataR3SaveLoadPrep, ataR3LoadExec, NULL); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 cannot register save state handlers")); /* * Initialize the device state. */ return ataR3ResetCommon(pDevIns, true /*fConstruct*/); } #else /* !IN_RING3 */ /** * @callback_method_impl{PDMDEVREGR0,pfnConstruct} */ static DECLCALLBACK(int) ataRZConstruct(PPDMDEVINS pDevIns) { PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); PATASTATE pThis = PDMDEVINS_2_DATA(pDevIns, PATASTATE); int rc = PDMDevHlpSetDeviceCritSect(pDevIns, PDMDevHlpCritSectGetNop(pDevIns)); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsBmDma, ataBMDMAIOPortWrite, ataBMDMAIOPortRead, NULL /*pvUser*/); AssertRCReturn(rc, rc); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { if (pThis->aCts[i].hIoPorts1First != NIL_IOMIOPORTHANDLE) { rc = PDMDevHlpIoPortSetUpContextEx(pDevIns, pThis->aCts[i].hIoPorts1First, ataIOPortWrite1Data, ataIOPortRead1Data, ataIOPortWriteStr1Data, ataIOPortReadStr1Data, (RTHCPTR)(uintptr_t)i); AssertLogRelRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->aCts[i].hIoPorts1Other, ataIOPortWrite1Other, ataIOPortRead1Other, (RTHCPTR)(uintptr_t)i); AssertLogRelRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->aCts[i].hIoPorts2, ataIOPortWrite2, ataIOPortRead2, (RTHCPTR)(uintptr_t)i); AssertLogRelRCReturn(rc, rc); } else { rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->aCts[i].hIoPortsEmpty1, ataIOPortWriteEmptyBus, ataIOPortReadEmptyBus, (void *)(uintptr_t)i /*pvUser*/); AssertRCReturn(rc, rc); rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->aCts[i].hIoPortsEmpty2, ataIOPortWriteEmptyBus, ataIOPortReadEmptyBus, (void *)(uintptr_t)i /*pvUser*/); AssertRCReturn(rc, rc); } } return VINF_SUCCESS; } #endif /* !IN_RING3 */ /** * The device registration structure. */ const PDMDEVREG g_DevicePIIX3IDE = { /* .u32Version = */ PDM_DEVREG_VERSION, /* .uReserved0 = */ 0, /* .szName = */ "piix3ide", /* .fFlags = */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RZ | PDM_DEVREG_FLAGS_NEW_STYLE | PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_RESET_NOTIFICATION, /* .fClass = */ PDM_DEVREG_CLASS_STORAGE, /* .cMaxInstances = */ 1, /* .uSharedVersion = */ 42, /* .cbInstanceShared = */ sizeof(ATASTATE), /* .cbInstanceCC = */ sizeof(ATASTATECC), /* .cbInstanceRC = */ sizeof(ATASTATERC), /* .cMaxPciDevices = */ 1, /* .cMaxMsixVectors = */ 0, /* .pszDescription = */ "Intel PIIX3 ATA controller.\n" " LUN #0 is primary master.\n" " LUN #1 is primary slave.\n" " LUN #2 is secondary master.\n" " LUN #3 is secondary slave.\n" " LUN #999 is the LED/Status connector.", #if defined(IN_RING3) /* .pszRCMod = */ "VBoxDDRC.rc", /* .pszR0Mod = */ "VBoxDDR0.r0", /* .pfnConstruct = */ ataR3Construct, /* .pfnDestruct = */ ataR3Destruct, /* .pfnRelocate = */ NULL, /* .pfnMemSetup = */ NULL, /* .pfnPowerOn = */ NULL, /* .pfnReset = */ ataR3Reset, /* .pfnSuspend = */ ataR3Suspend, /* .pfnResume = */ ataR3Resume, /* .pfnAttach = */ ataR3Attach, /* .pfnDetach = */ ataR3Detach, /* .pfnQueryInterface = */ NULL, /* .pfnInitComplete = */ NULL, /* .pfnPowerOff = */ ataR3PowerOff, /* .pfnSoftReset = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RING0) /* .pfnEarlyConstruct = */ NULL, /* .pfnConstruct = */ ataRZConstruct, /* .pfnDestruct = */ NULL, /* .pfnFinalDestruct = */ NULL, /* .pfnRequest = */ NULL, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #elif defined(IN_RC) /* .pfnConstruct = */ ataRZConstruct, /* .pfnReserved0 = */ NULL, /* .pfnReserved1 = */ NULL, /* .pfnReserved2 = */ NULL, /* .pfnReserved3 = */ NULL, /* .pfnReserved4 = */ NULL, /* .pfnReserved5 = */ NULL, /* .pfnReserved6 = */ NULL, /* .pfnReserved7 = */ NULL, #else # error "Not in IN_RING3, IN_RING0 or IN_RC!" #endif /* .u32VersionEnd = */ PDM_DEVREG_VERSION }; #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */