/* $Id: DevAHCI.cpp 28800 2010-04-27 08:22:32Z vboxsync $ */ /** @file * VBox storage devices: AHCI controller device (disk and cdrom). * Implements the AHCI standard 1.1 */ /* * Copyright (C) 2006-2009 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_dev_ahci AHCI - Advanced Host Controller Interface Emulation. * * This component implements an AHCI serial ATA controller. The device is split * into two parts. The first part implements the register interface for the * guest and the second one does the data transfer. * * The guest can access the controller in two ways. The first one is the native * way implementing the registers described in the AHCI specification and is * the preferred one. The second implements the I/O ports used for booting from * the hard disk and for guests which don't have an AHCI SATA driver. * * The data is transfered in an asychronous way using one thread per implemented * port or using the new async completion interface which is still under * development. [not quite up to date] */ /******************************************************************************* * Header Files * *******************************************************************************/ //#define DEBUG #define LOG_GROUP LOG_GROUP_DEV_AHCI #include #include #include #include #include #include #include #include #ifdef IN_RING3 # include # include # include # include # include # include #endif #include "ide.h" #include "ATAController.h" #include "../Builtins.h" #define AHCI_MAX_NR_PORTS_IMPL 30 #define AHCI_NR_COMMAND_SLOTS 32 #define AHCI_NR_OF_ALLOWED_BIGGER_LISTS 100 /** The current saved state version. */ #define AHCI_SAVED_STATE_VERSION 3 /** The saved state version use in VirtualBox 3.0 and earlier. * This was before the config was added and ahciIOTasks was dropped. */ #define AHCI_SAVED_STATE_VERSION_VBOX_30 2 /** * Maximum number of sectors to transfer in a READ/WRITE MULTIPLE request. * Set to 1 to disable multi-sector read support. According to the ATA * specification this must be a power of 2 and it must fit in an 8 bit * value. Thus the only valid values are 1, 2, 4, 8, 16, 32, 64 and 128. */ #define ATA_MAX_MULT_SECTORS 128 /** * Fastest PIO mode supported by the drive. */ #define ATA_PIO_MODE_MAX 4 /** * Fastest MDMA mode supported by the drive. */ #define ATA_MDMA_MODE_MAX 2 /** * Fastest UDMA mode supported by the drive. */ #define ATA_UDMA_MODE_MAX 6 /** * Length of the configurable VPD data (without termination) */ #define AHCI_SERIAL_NUMBER_LENGTH 20 #define AHCI_FIRMWARE_REVISION_LENGTH 8 #define AHCI_MODEL_NUMBER_LENGTH 40 #define AHCI_ATAPI_INQUIRY_VENDOR_ID_LENGTH 8 #define AHCI_ATAPI_INQUIRY_PRODUCT_ID_LENGTH 16 #define AHCI_ATAPI_INQUIRY_REVISION_LENGTH 4 /* Command Header. */ typedef struct { /** Description Information. */ uint32_t u32DescInf; /** Command status. */ uint32_t u32PRDBC; /** Command Table Base Address. */ uint32_t u32CmdTblAddr; /** Command Table Base Address - upper 32-bits. */ uint32_t u32CmdTblAddrUp; /** Reserved */ uint32_t u32Reserved[4]; } CmdHdr; AssertCompileSize(CmdHdr, 32); /* Defines for the command header. */ #define AHCI_CMDHDR_PRDTL_MASK 0xffff0000 #define AHCI_CMDHDR_PRDTL_ENTRIES(x) ((x & AHCI_CMDHDR_PRDTL_MASK) >> 16) #define AHCI_CMDHDR_C RT_BIT(10) #define AHCI_CMDHDR_B RT_BIT(9) #define AHCI_CMDHDR_R RT_BIT(8) #define AHCI_CMDHDR_P RT_BIT(7) #define AHCI_CMDHDR_W RT_BIT(6) #define AHCI_CMDHDR_A RT_BIT(5) #define AHCI_CMDHDR_CFL_MASK 0x1f #define AHCI_CMDHDR_PRDT_OFFSET 0x80 #define AHCI_CMDHDR_ACMD_OFFSET 0x40 /* Defines for the command FIS. */ /* Defines that are used in the first double word. */ #define AHCI_CMDFIS_TYPE 0 /* The first byte. */ # define AHCI_CMDFIS_TYPE_H2D 0x27 /* Register - Host to Device FIS. */ # define AHCI_CMDFIS_TYPE_H2D_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_D2H 0x34 /* Register - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_D2H_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_SETDEVBITS 0xa1 /* Set Device Bits - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE 8 /* Two double words. */ # define AHCI_CMDFIS_TYPE_DMAACTD2H 0x39 /* DMA Activate - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_DMAACTD2H_SIZE 4 /* One double word. */ # define AHCI_CMDFIS_TYPE_DMASETUP 0x41 /* DMA Setup - Bidirectional FIS. */ # define AHCI_CMDFIS_TYPE_DMASETUP_SIZE 28 /* Seven double words. */ # define AHCI_CMDFIS_TYPE_PIOSETUP 0x5f /* PIO Setup - Device to Host FIS. */ # define AHCI_CMDFIS_TYPE_PIOSETUP_SIZE 20 /* Five double words. */ # define AHCI_CMDFIS_TYPE_DATA 0x46 /* Data - Bidirectional FIS. */ #define AHCI_CMDFIS_BITS 1 /* Interrupt and Update bit. */ #define AHCI_CMDFIS_C RT_BIT(7) /* Host to device. */ #define AHCI_CMDFIS_I RT_BIT(6) /* Device to Host. */ #define AHCI_CMDFIS_CMD 2 #define AHCI_CMDFIS_FET 3 #define AHCI_CMDFIS_SECTN 4 #define AHCI_CMDFIS_CYLL 5 #define AHCI_CMDFIS_CYLH 6 #define AHCI_CMDFIS_HEAD 7 #define AHCI_CMDFIS_SECTNEXP 8 #define AHCI_CMDFIS_CYLLEXP 9 #define AHCI_CMDFIS_CYLHEXP 10 #define AHCI_CMDFIS_FETEXP 11 #define AHCI_CMDFIS_SECTC 12 #define AHCI_CMDFIS_SECTCEXP 13 #define AHCI_CMDFIS_CTL 15 # define AHCI_CMDFIS_CTL_SRST RT_BIT(2) /* Reset device. */ # define AHCI_CMDFIS_CTL_NIEN RT_BIT(1) /* Assert or clear interrupt. */ /* For D2H FIS */ #define AHCI_CMDFIS_STS 2 #define AHCI_CMDFIS_ERR 3 /** * Scatter gather list entry data. */ typedef struct AHCIPORTTASKSTATESGENTRY { /** Flag whether the buffer in the list is from the guest or an * allocated temporary buffer because the segments in the guest * are not sector aligned. */ bool fGuestMemory; /** Flag dependent data. */ union { /** Data to handle direct mappings of guest buffers. */ struct { /** The page lock. */ PGMPAGEMAPLOCK PageLock; } direct; /** Data to handle temporary buffers. */ struct { /** The first segment in the guest which is not sector aligned. */ RTGCPHYS GCPhysAddrBaseFirstUnaligned; /** Number of unaligned buffers in the guest. */ uint32_t cUnaligned; /** Pointer to the start of the buffer. */ void *pvBuf; } temp; } u; } AHCIPORTTASKSTATESGENTRY, *PAHCIPORTTASKSTATESGENTRY; /** Pointer to a pointer of a scatter gather list entry. */ typedef PAHCIPORTTASKSTATESGENTRY *PPAHCIPORTTASKSTATESGENTRY; /** Pointer to a task state. */ typedef struct AHCIPORTTASKSTATE *PAHCIPORTTASKSTATE; /** * Data processing callback * * @returns VBox status. * @param pAhciPortTaskState The task state. */ typedef DECLCALLBACK(int) FNAHCIPOSTPROCESS(PAHCIPORTTASKSTATE pAhciPortTaskState); /** Pointer to a FNAHCIPOSTPROCESS() function. */ typedef FNAHCIPOSTPROCESS *PFNAHCIPOSTPROCESS; /** * Transfer type. */ typedef enum AHCITXDIR { /** Invalid */ AHCITXDIR_INVALID = 0, /** None */ AHCITXDIR_NONE, /** Read */ AHCITXDIR_READ, /** Write */ AHCITXDIR_WRITE, /** Flush */ AHCITXDIR_FLUSH } AHCITXDIR; /** * A task state. */ typedef struct AHCIPORTTASKSTATE { /** Tag of the task. */ uint32_t uTag; /** Command is queued. */ bool fQueued; /** The command header for this task. */ CmdHdr cmdHdr; /** The command Fis for this task. */ uint8_t cmdFis[AHCI_CMDFIS_TYPE_H2D_SIZE]; /** The ATAPI comnmand data. */ uint8_t aATAPICmd[ATAPI_PACKET_SIZE]; /** Physical address of the command header. - GC */ RTGCPHYS GCPhysCmdHdrAddr; /** Data direction. */ AHCITXDIR enmTxDir; /** Start offset. */ uint64_t uOffset; /** Number of bytes to transfer. */ uint32_t cbTransfer; /** ATA error register */ uint8_t uATARegError; /** ATA status register */ uint8_t uATARegStatus; /** How many entries would fit into the sg list. */ uint32_t cSGListSize; /** Number of used SG list entries. */ uint32_t cSGListUsed; /** Pointer to the first entry of the scatter gather list. */ PRTSGSEG pSGListHead; /** Number of scatter gather list entries. */ uint32_t cSGEntries; /** Total number of bytes the guest reserved for this request. * Sum of all SG entries. */ uint32_t cbSGBuffers; /** Pointer to the first mapping information entry. */ PAHCIPORTTASKSTATESGENTRY paSGEntries; /** Size of the temporary buffer for unaligned guest segments. */ uint32_t cbBufferUnaligned; /** Pointer to the temporary buffer. */ void *pvBufferUnaligned; /** Number of times in a row the scatter gather list was too big. */ uint32_t cSGListTooBig; /** Post processing callback. * If this is set we will use a buffer for the data * and the callback copies the data to the destination. */ PFNAHCIPOSTPROCESS pfnPostProcess; #ifdef RT_STRICT /** Flag whether the task state is currently active - used for debugging */ volatile bool fActive; #endif } AHCIPORTTASKSTATE; /** * Notifier queue item. */ typedef struct DEVPORTNOTIFIERQUEUEITEM { /** The core part owned by the queue manager. */ PDMQUEUEITEMCORE Core; /** On which port the async io thread should be put into action. */ uint8_t iPort; /** Which task to process. */ uint8_t iTask; /** Flag whether the task is queued. */ uint8_t fQueued; } DEVPORTNOTIFIERQUEUEITEM, *PDEVPORTNOTIFIERQUEUEITEM; /** * @implements PDMIBASE * @implements PDMIBLOCKPORT * @implements PDMIBLOCKASYNCPORT * @implements PDMIMOUNTNOTIFY */ typedef struct AHCIPort { /** Pointer to the device instance - HC ptr */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the device instance - R0 ptr */ PPDMDEVINSR0 pDevInsR0; /** Pointer to the device instance - RC ptr. */ PPDMDEVINSRC pDevInsRC; #if HC_ARCH_BITS == 64 uint32_t Alignment0; #endif /** Pointer to the parent AHCI structure - R3 ptr. */ R3PTRTYPE(struct AHCI *) pAhciR3; /** Pointer to the parent AHCI structure - R0 ptr. */ R0PTRTYPE(struct AHCI *) pAhciR0; /** Pointer to the parent AHCI structure - RC ptr. */ RCPTRTYPE(struct AHCI *) pAhciRC; /** Command List Base Address. */ uint32_t regCLB; /** Command List Base Address upper bits. */ uint32_t regCLBU; /** FIS Base Address. */ uint32_t regFB; /** FIS Base Address upper bits. */ uint32_t regFBU; /** Interrupt Status. */ volatile uint32_t regIS; /** Interrupt Enable. */ uint32_t regIE; /** Command. */ uint32_t regCMD; /** Task File Data. */ uint32_t regTFD; /** Signature */ uint32_t regSIG; /** Serial ATA Status. */ uint32_t regSSTS; /** Serial ATA Control. */ uint32_t regSCTL; /** Serial ATA Error. */ uint32_t regSERR; /** Serial ATA Active. */ uint32_t regSACT; /** Command Issue. */ uint32_t regCI; #if HC_ARCH_BITS == 64 uint32_t Alignment1; #endif /** Command List Base Address */ volatile RTGCPHYS GCPhysAddrClb; /** FIS Base Address */ volatile RTGCPHYS GCPhysAddrFb; /** If we use the new async interface. */ bool fAsyncInterface; #if HC_ARCH_BITS == 64 uint32_t Alignment2; #endif /** Async IO Thread. */ PPDMTHREAD pAsyncIOThread; /** Request semaphore. */ RTSEMEVENT AsyncIORequestSem; /** Task queue. */ volatile uint8_t ahciIOTasks[2*AHCI_NR_COMMAND_SLOTS]; /** Actual write position. */ uint8_t uActWritePos; /** Actual read position. */ uint8_t uActReadPos; /** Actual number of active tasks. */ volatile uint32_t uActTasksActive; /** Device is powered on. */ bool fPoweredOn; /** Device has spun up. */ bool fSpunUp; /** First D2H FIS was send. */ bool fFirstD2HFisSend; /** Attached device is a CD/DVD drive. */ bool fATAPI; #if HC_ARCH_BITS == 64 uint32_t Alignment3; #endif /** Device specific settings. */ /** Pointer to the attached driver's base interface. */ R3PTRTYPE(PPDMIBASE) pDrvBase; /** Pointer to the attached driver's block interface. */ R3PTRTYPE(PPDMIBLOCK) pDrvBlock; /** Pointer to the attached driver's async block interface. */ R3PTRTYPE(PPDMIBLOCKASYNC) pDrvBlockAsync; /** Pointer to the attached driver's block bios interface. */ R3PTRTYPE(PPDMIBLOCKBIOS) pDrvBlockBios; /** Pointer to the attached driver's mount interface. */ R3PTRTYPE(PPDMIMOUNT) pDrvMount; /** The base interface. */ PDMIBASE IBase; /** The block port interface. */ PDMIBLOCKPORT IPort; /** The optional block async port interface. */ PDMIBLOCKASYNCPORT IPortAsync; /** The mount notify interface. */ PDMIMOUNTNOTIFY IMountNotify; /** Physical geometry of this image. */ PDMMEDIAGEOMETRY PCHSGeometry; /** The status LED state for this drive. */ PDMLED Led; #if HC_ARCH_BITS == 64 uint32_t Alignment4; #endif /** Number of total sectors. */ uint64_t cTotalSectors; /** Currently configured number of sectors in a multi-sector transfer. */ uint32_t cMultSectors; /** Currently active transfer mode (MDMA/UDMA) and speed. */ uint8_t uATATransferMode; /** ATAPI sense key. */ uint8_t uATAPISenseKey; /** ATAPI additional sens code. */ uint8_t uATAPIASC; /** HACK: Countdown till we report a newly unmounted drive as mounted. */ uint8_t cNotifiedMediaChange; /** The LUN. */ RTUINT iLUN; /** Flag if we are in a device reset. */ bool fResetDevice; /** Bitmask for finished tasks. */ volatile uint32_t u32TasksFinished; /** Bitmask for finished queued tasks. */ volatile uint32_t u32QueuedTasksFinished; /** * Array of cached tasks. The tag number is the index value. * Only used with the async interface. */ R3PTRTYPE(PAHCIPORTTASKSTATE) aCachedTasks[AHCI_NR_COMMAND_SLOTS]; uint32_t u32Alignment5[4]; #if HC_ARCH_BITS == 32 uint32_t u32Alignment6; #endif /** Release statistics: number of DMA commands. */ STAMCOUNTER StatDMA; /** Release statistics: number of bytes written. */ STAMCOUNTER StatBytesWritten; /** Release statistics: number of bytes read. */ STAMCOUNTER StatBytesRead; /** Release statistics: Number of I/O requests processed per second. */ STAMCOUNTER StatIORequestsPerSecond; #ifdef VBOX_WITH_STATISTICS /** Statistics: Time to complete one request. */ STAMPROFILE StatProfileProcessTime; /** Statistics: Time to map requests into R3. */ STAMPROFILE StatProfileMapIntoR3; /** Statistics: Amount of time to read/write data. */ STAMPROFILE StatProfileReadWrite; /** Statistics: Amount of time to destroy a list. */ STAMPROFILE StatProfileDestroyScatterGatherList; #endif /* VBOX_WITH_STATISTICS */ /** Flag whether a notification was already send to R3. */ volatile bool fNotificationSend; /** Flag whether this port is in a reset state. */ volatile bool fPortReset; /** Flag whether the I/O thread idles. */ volatile bool fAsyncIOThreadIdle; /** The serial numnber to use for IDENTIFY DEVICE commands. */ char szSerialNumber[AHCI_SERIAL_NUMBER_LENGTH+1]; /** < one extra byte for termination */ /** The firmware revision to use for IDENTIFY DEVICE commands. */ char szFirmwareRevision[AHCI_FIRMWARE_REVISION_LENGTH+1]; /** < one extra byte for termination */ /** The model number to use for IDENTIFY DEVICE commands. */ char szModelNumber[AHCI_MODEL_NUMBER_LENGTH+1]; /** < one extra byte for termination */ /** The vendor identification string for SCSI INQUIRY commands. */ char szInquiryVendorId[AHCI_ATAPI_INQUIRY_VENDOR_ID_LENGTH+1]; /** The product identification string for SCSI INQUIRY commands. */ char szInquiryProductId[AHCI_ATAPI_INQUIRY_PRODUCT_ID_LENGTH+1]; /** The revision string for SCSI INQUIRY commands. */ char szInquiryRevision[AHCI_ATAPI_INQUIRY_REVISION_LENGTH+1]; /** Error counter */ uint32_t cErrors; } AHCIPort; /** Pointer to the state of an AHCI port. */ typedef AHCIPort *PAHCIPort; /** * Main AHCI device state. * * @implements PDMILEDPORTS */ typedef struct AHCI { /** The PCI device structure. */ PCIDEVICE dev; /** Pointer to the device instance - R3 ptr */ PPDMDEVINSR3 pDevInsR3; /** Pointer to the device instance - R0 ptr */ PPDMDEVINSR0 pDevInsR0; /** Pointer to the device instance - RC ptr. */ PPDMDEVINSRC pDevInsRC; #if HC_ARCH_BITS == 64 uint32_t Alignment0; #endif /** Status LUN: The base interface. */ PDMIBASE IBase; /** Status LUN: Leds interface. */ PDMILEDPORTS ILeds; /** Status LUN: Partner of ILeds. */ R3PTRTYPE(PPDMILEDCONNECTORS) pLedsConnector; #if HC_ARCH_BITS == 64 uint32_t Alignment1[2]; #endif /** Base address of the MMIO region. */ RTGCPHYS MMIOBase; /** Global Host Control register of the HBA */ /** HBA Capabilities - Readonly */ uint32_t regHbaCap; /** HBA Control */ uint32_t regHbaCtrl; /** Interrupt Status */ uint32_t regHbaIs; /** Ports Implemented - Readonly */ uint32_t regHbaPi; /** AHCI Version - Readonly */ uint32_t regHbaVs; /** Command completion coalescing control */ uint32_t regHbaCccCtl; /** Command completion coalescing ports */ uint32_t regHbaCccPorts; #if HC_ARCH_BITS == 64 uint32_t Alignment3; #endif /** Countdown timer for command completion coalescing - R3 ptr */ PTMTIMERR3 pHbaCccTimerR3; /** Countdown timer for command completion coalescing - R0 ptr */ PTMTIMERR0 pHbaCccTimerR0; /** Countdown timer for command completion coalescing - RC ptr */ PTMTIMERRC pHbaCccTimerRC; #if HC_ARCH_BITS == 64 uint32_t Alignment4; #endif /** Queue to send tasks to R3. - HC ptr */ R3PTRTYPE(PPDMQUEUE) pNotifierQueueR3; /** Queue to send tasks to R3. - HC ptr */ R0PTRTYPE(PPDMQUEUE) pNotifierQueueR0; /** Queue to send tasks to R3. - RC ptr */ RCPTRTYPE(PPDMQUEUE) pNotifierQueueRC; #if HC_ARCH_BITS == 64 uint32_t Alignment5; #endif /** Which port number is used to mark an CCC interrupt */ uint8_t uCccPortNr; #if HC_ARCH_BITS == 64 uint32_t Alignment6; #endif /** Timeout value */ uint64_t uCccTimeout; /** Number of completions used to assert an interrupt */ uint32_t uCccNr; /** Current number of completed commands */ uint32_t uCccCurrentNr; /** Register structure per port */ AHCIPort ahciPort[AHCI_MAX_NR_PORTS_IMPL]; /** Needed values for the emulated ide channels. */ AHCIATACONTROLLER aCts[2]; /** The critical section. */ PDMCRITSECT lock; /** Bitmask of ports which asserted an interrupt. */ uint32_t u32PortsInterrupted; /** Device is in a reset state. */ bool fReset; /** Supports 64bit addressing */ bool f64BitAddr; /** GC enabled. */ bool fGCEnabled; /** R0 enabled. */ bool fR0Enabled; /** If the new async interface is used if available. */ bool fUseAsyncInterfaceIfAvailable; /** Indicates that PDMDevHlpAsyncNotificationCompleted should be called when * a port is entering the idle state. */ bool volatile fSignalIdle; bool afAlignment8[1]; /** Number of usable ports on this controller. */ uint32_t cPortsImpl; #if HC_ARCH_BITS == 64 uint32_t Alignment9; #endif /** Flag whether we have written the first 4bytes in an 8byte MMIO write successfully. */ volatile bool f8ByteMMIO4BytesWrittenSuccessfully; /** At which number of I/O requests per second we consider having high I/O load. */ uint32_t cHighIOThreshold; /** How many milliseconds to sleep. */ uint32_t cMillisToSleep; } AHCI; /** Pointer to the state of an AHCI device. */ typedef AHCI *PAHCI; /** * Scatter gather list entry. */ typedef struct { /** Data Base Address. */ uint32_t u32DBA; /** Data Base Address - Upper 32-bits. */ uint32_t u32DBAUp; /** Reserved */ uint32_t u32Reserved; /** Description information. */ uint32_t u32DescInf; } SGLEntry; AssertCompileSize(SGLEntry, 16); /** Defines for a scatter gather list entry. */ #define SGLENTRY_DBA_READONLY ~(RT_BIT(0)) #define SGLENTRY_DESCINF_I RT_BIT(31) #define SGLENTRY_DESCINF_DBC 0x3fffff #define SGLENTRY_DESCINF_READONLY 0x803fffff /* Defines for the global host control registers for the HBA. */ #define AHCI_HBA_GLOBAL_SIZE 0x100 /* Defines for the HBA Capabilities - Readonly */ #define AHCI_HBA_CAP_S64A RT_BIT(31) #define AHCI_HBA_CAP_SNCQ RT_BIT(30) #define AHCI_HBA_CAP_SIS RT_BIT(28) #define AHCI_HBA_CAP_SSS RT_BIT(27) #define AHCI_HBA_CAP_SALP RT_BIT(26) #define AHCI_HBA_CAP_SAL RT_BIT(25) #define AHCI_HBA_CAP_SCLO RT_BIT(24) #define AHCI_HBA_CAP_ISS (RT_BIT(23) | RT_BIT(22) | RT_BIT(21) | RT_BIT(20)) # define AHCI_HBA_CAP_ISS_SHIFT(x) (((x) << 20) & AHCI_HBA_CAP_ISS) # define AHCI_HBA_CAP_ISS_GEN1 RT_BIT(0) # define AHCI_HBA_CAP_ISS_GEN2 RT_BIT(1) #define AHCI_HBA_CAP_SNZO RT_BIT(19) #define AHCI_HBA_CAP_SAM RT_BIT(18) #define AHCI_HBA_CAP_SPM RT_BIT(17) #define AHCI_HBA_CAP_PMD RT_BIT(15) #define AHCI_HBA_CAP_SSC RT_BIT(14) #define AHCI_HBA_CAP_PSC RT_BIT(13) #define AHCI_HBA_CAP_NCS (RT_BIT(12) | RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_HBA_CAP_NCS_SET(x) (((x-1) << 8) & AHCI_HBA_CAP_NCS) /* 0's based */ #define AHCI_HBA_CAP_CCCS RT_BIT(7) #define AHCI_HBA_CAP_NP (RT_BIT(4) | RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_HBA_CAP_NP_SET(x) ((x-1) & AHCI_HBA_CAP_NP) /* 0's based */ /* Defines for the HBA Control register - Read/Write */ #define AHCI_HBA_CTRL_AE RT_BIT(31) #define AHCI_HBA_CTRL_IE RT_BIT(1) #define AHCI_HBA_CTRL_HR RT_BIT(0) #define AHCI_HBA_CTRL_RW_MASK (RT_BIT(0) | RT_BIT(1)) /* Mask for the used bits */ /* Defines for the HBA Version register - Readonly (We support AHCI 1.0) */ #define AHCI_HBA_VS_MJR (1 << 16) #define AHCI_HBA_VS_MNR 0x100 /* Defines for the command completion coalescing control register */ #define AHCI_HBA_CCC_CTL_TV 0xffff0000 #define AHCI_HBA_CCC_CTL_TV_SET(x) (x << 16) #define AHCI_HBA_CCC_CTL_TV_GET(x) ((x & AHCI_HBA_CCC_CTL_TV) >> 16) #define AHCI_HBA_CCC_CTL_CC 0xff00 #define AHCI_HBA_CCC_CTL_CC_SET(x) (x << 8) #define AHCI_HBA_CCC_CTL_CC_GET(x) ((x & AHCI_HBA_CCC_CTL_CC) >> 8) #define AHCI_HBA_CCC_CTL_INT 0xf8 #define AHCI_HBA_CCC_CTL_INT_SET(x) (x << 3) #define AHCI_HBA_CCC_CTL_INT_GET(x) ((x & AHCI_HBA_CCC_CTL_INT) >> 3) #define AHCI_HBA_CCC_CTL_EN RT_BIT(0) /* Defines for the port registers. */ #define AHCI_PORT_REGISTER_SIZE 0x80 #define AHCI_PORT_CLB_RESERVED 0xfffffc00 /* For masking out the reserved bits. */ #define AHCI_PORT_FB_RESERVED 0x7fffff00 /* For masking out the reserved bits. */ #define AHCI_PORT_IS_CPDS RT_BIT(31) #define AHCI_PORT_IS_TFES RT_BIT(30) #define AHCI_PORT_IS_HBFS RT_BIT(29) #define AHCI_PORT_IS_HBDS RT_BIT(28) #define AHCI_PORT_IS_IFS RT_BIT(27) #define AHCI_PORT_IS_INFS RT_BIT(26) #define AHCI_PORT_IS_OFS RT_BIT(24) #define AHCI_PORT_IS_IPMS RT_BIT(23) #define AHCI_PORT_IS_PRCS RT_BIT(22) #define AHCI_PORT_IS_DIS RT_BIT(7) #define AHCI_PORT_IS_PCS RT_BIT(6) #define AHCI_PORT_IS_DPS RT_BIT(5) #define AHCI_PORT_IS_UFS RT_BIT(4) #define AHCI_PORT_IS_SDBS RT_BIT(3) #define AHCI_PORT_IS_DSS RT_BIT(2) #define AHCI_PORT_IS_PSS RT_BIT(1) #define AHCI_PORT_IS_DHRS RT_BIT(0) #define AHCI_PORT_IS_READONLY 0xfd8000af /* Readonly mask including reserved bits. */ #define AHCI_PORT_IE_CPDE RT_BIT(31) #define AHCI_PORT_IE_TFEE RT_BIT(30) #define AHCI_PORT_IE_HBFE RT_BIT(29) #define AHCI_PORT_IE_HBDE RT_BIT(28) #define AHCI_PORT_IE_IFE RT_BIT(27) #define AHCI_PORT_IE_INFE RT_BIT(26) #define AHCI_PORT_IE_OFE RT_BIT(24) #define AHCI_PORT_IE_IPME RT_BIT(23) #define AHCI_PORT_IE_PRCE RT_BIT(22) #define AHCI_PORT_IE_DIE RT_BIT(7) /* Not supported for now, readonly. */ #define AHCI_PORT_IE_PCE RT_BIT(6) #define AHCI_PORT_IE_DPE RT_BIT(5) #define AHCI_PORT_IE_UFE RT_BIT(4) #define AHCI_PORT_IE_SDBE RT_BIT(3) #define AHCI_PORT_IE_DSE RT_BIT(2) #define AHCI_PORT_IE_PSE RT_BIT(1) #define AHCI_PORT_IE_DHRE RT_BIT(0) #define AHCI_PORT_IE_READONLY (0xfdc000ff) /* Readonly mask including reserved bits. */ #define AHCI_PORT_CMD_ICC (RT_BIT(28) | RT_BIT(29) | RT_BIT(30) | RT_BIT(31)) #define AHCI_PORT_CMD_ICC_SHIFT(x) ((x) << 28) # define AHCI_PORT_CMD_ICC_IDLE 0x0 # define AHCI_PORT_CMD_ICC_ACTIVE 0x1 # define AHCI_PORT_CMD_ICC_PARTIAL 0x2 # define AHCI_PORT_CMD_ICC_SLUMBER 0x6 #define AHCI_PORT_CMD_ASP RT_BIT(27) /* Not supported - Readonly */ #define AHCI_PORT_CMD_ALPE RT_BIT(26) /* Not supported - Readonly */ #define AHCI_PORT_CMD_DLAE RT_BIT(25) #define AHCI_PORT_CMD_ATAPI RT_BIT(24) #define AHCI_PORT_CMD_CPD RT_BIT(20) #define AHCI_PORT_CMD_ISP RT_BIT(19) /* Readonly */ #define AHCI_PORT_CMD_HPCP RT_BIT(18) #define AHCI_PORT_CMD_PMA RT_BIT(17) /* Not supported - Readonly */ #define AHCI_PORT_CMD_CPS RT_BIT(16) #define AHCI_PORT_CMD_CR RT_BIT(15) /* Readonly */ #define AHCI_PORT_CMD_FR RT_BIT(14) /* Readonly */ #define AHCI_PORT_CMD_ISS RT_BIT(13) /* Readonly */ #define AHCI_PORT_CMD_CCS (RT_BIT(8) | RT_BIT(9) | RT_BIT(10) | RT_BIT(11) | RT_BIT(12)) #define AHCI_PORT_CMD_CCS_SHIFT(x) (x << 8) /* Readonly */ #define AHCI_PORT_CMD_FRE RT_BIT(4) #define AHCI_PORT_CMD_CLO RT_BIT(3) #define AHCI_PORT_CMD_POD RT_BIT(2) #define AHCI_PORT_CMD_SUD RT_BIT(1) #define AHCI_PORT_CMD_ST RT_BIT(0) #define AHCI_PORT_CMD_READONLY (0xff02001f & ~(AHCI_PORT_CMD_ASP | AHCI_PORT_CMD_ALPE | AHCI_PORT_CMD_PMA)) #define AHCI_PORT_SCTL_IPM (RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_PORT_SCTL_IPM_GET(x) ((x & AHCI_PORT_SCTL_IPM) >> 8) #define AHCI_PORT_SCTL_SPD (RT_BIT(7) | RT_BIT(6) | RT_BIT(5) | RT_BIT(4)) #define AHCI_PORT_SCTL_SPD_GET(x) ((x & AHCI_PORT_SCTL_SPD) >> 4) #define AHCI_PORT_SCTL_DET (RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_PORT_SCTL_DET_GET(x) (x & AHCI_PORT_SCTL_DET) #define AHCI_PORT_SCTL_DET_NINIT 0 #define AHCI_PORT_SCTL_DET_INIT 1 #define AHCI_PORT_SCTL_DET_OFFLINE 4 #define AHCI_PORT_SCTL_READONLY 0xfff #define AHCI_PORT_SSTS_IPM (RT_BIT(11) | RT_BIT(10) | RT_BIT(9) | RT_BIT(8)) #define AHCI_PORT_SSTS_IPM_GET(x) ((x & AHCI_PORT_SCTL_IPM) >> 8) #define AHCI_PORT_SSTS_SPD (RT_BIT(7) | RT_BIT(6) | RT_BIT(5) | RT_BIT(4)) #define AHCI_PORT_SSTS_SPD_GET(x) ((x & AHCI_PORT_SCTL_SPD) >> 4) #define AHCI_PORT_SSTS_DET (RT_BIT(3) | RT_BIT(2) | RT_BIT(1) | RT_BIT(0)) #define AHCI_PORT_SSTS_DET_GET(x) (x & AHCI_PORT_SCTL_DET) #define AHCI_PORT_TFD_BSY RT_BIT(7) #define AHCI_PORT_TFD_DRQ RT_BIT(3) #define AHCI_PORT_TFD_ERR RT_BIT(0) #define AHCI_PORT_SERR_X RT_BIT(26) #define AHCI_PORT_SERR_W RT_BIT(18) #define AHCI_PORT_SERR_N RT_BIT(16) /* Signatures for attached storage devices. */ #define AHCI_PORT_SIG_DISK 0x00000101 #define AHCI_PORT_SIG_ATAPI 0xeb140101 /* * The AHCI spec defines an area of memory where the HBA posts received FIS's from the device. * regFB points to the base of this area. * Every FIS type has an offset where it is posted in this area. */ #define AHCI_RECFIS_DSFIS_OFFSET 0x00 /* DMA Setup FIS */ #define AHCI_RECFIS_PSFIS_OFFSET 0x20 /* PIO Setup FIS */ #define AHCI_RECFIS_RFIS_OFFSET 0x40 /* D2H Register FIS */ #define AHCI_RECFIS_SDBFIS_OFFSET 0x58 /* Set Device Bits FIS */ #define AHCI_RECFIS_UFIS_OFFSET 0x60 /* Unknown FIS type */ #define AHCI_TASK_IS_QUEUED(x) ((x) & 0x1) #define AHCI_TASK_GET_TAG(x) ((x) >> 1) #define AHCI_TASK_SET(tag, queued) (((tag) << 1) | (queued)) /** * AHCI register operator. */ typedef struct ahci_opreg { const char *pszName; int (*pfnRead )(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value); int (*pfnWrite)(PAHCI ahci, uint32_t iReg, uint32_t u32Value); } AHCIOPREG; /** * AHCI port register operator. */ typedef struct pAhciPort_opreg { const char *pszName; int (*pfnRead )(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value); int (*pfnWrite)(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value); } AHCIPORTOPREG; #ifndef VBOX_DEVICE_STRUCT_TESTCASE RT_C_DECLS_BEGIN PDMBOTHCBDECL(int) ahciMMIORead(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb); PDMBOTHCBDECL(int) ahciMMIOWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb); static void ahciHBAReset(PAHCI pThis); PDMBOTHCBDECL(int) ahciIOPortWrite1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ahciIOPortRead1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) ahciIOPortWrite2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ahciIOPortRead2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); PDMBOTHCBDECL(int) ahciLegacyFakeWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); PDMBOTHCBDECL(int) ahciLegacyFakeRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); #ifdef IN_RING3 static int ahciPostFisIntoMemory(PAHCIPort pAhciPort, unsigned uFisType, uint8_t *cmdFis); static void ahciPostFirstD2HFisIntoMemory(PAHCIPort pAhciPort); static int ahciScatterGatherListCopyFromBuffer(PAHCIPORTTASKSTATE pAhciPortTaskState, void *pvBuf, size_t cbBuf); static int ahciScatterGatherListCreate(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, bool fReadonly); static int ahciScatterGatherListDestroy(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState); static void ahciCopyFromBufferIntoSGList(PPDMDEVINS pDevIns, PAHCIPORTTASKSTATESGENTRY pSGInfo); static void ahciCopyFromSGListIntoBuffer(PPDMDEVINS pDevIns, PAHCIPORTTASKSTATESGENTRY pSGInfo); static void ahciScatterGatherListGetTotalBufferSize(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState); static int ahciScatterGatherListCreateSafe(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, bool fReadonly, unsigned cSGEntriesProcessed); #endif RT_C_DECLS_END #define PCIDEV_2_PAHCI(pPciDev) ( (PAHCI)(pPciDev) ) #define PDMIMOUNT_2_PAHCIPORT(pInterface) ( (PAHCIPort)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCIPort, IMount)) ) #define PDMIMOUNTNOTIFY_2_PAHCIPORT(pInterface) ( (PAHCIPort)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCIPort, IMountNotify)) ) #define PDMIBASE_2_PAHCIPORT(pInterface) ( (PAHCIPort)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCIPort, IBase)) ) #define PDMIBASE_2_PAHCI(pInterface) ( (PAHCI)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCI, IBase)) ) #define PDMILEDPORTS_2_PAHCI(pInterface) ( (PAHCI)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCI, ILeds)) ) #if 1 #define AHCI_RTGCPHYS_FROM_U32(Hi, Lo) ( (RTGCPHYS)RT_MAKE_U64(Lo, Hi) ) #else #define AHCI_RTGCPHYS_FROM_U32(Hi, Lo) ( (RTGCPHYS)(Lo) ) #endif #ifdef IN_RING3 # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("R3 P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("R3 P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #elif IN_RING0 # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("R0 P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("R0 P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #elif IN_RC # ifdef LOG_USE_C99 # define ahciLog(a) \ Log(("GC P%u: %M", pAhciPort->iLUN, _LogRelRemoveParentheseis a)) # else # define ahciLog(a) \ do { Log(("GC P%u: ", pAhciPort->iLUN)); Log(a); } while(0) # endif #endif /** * Update PCI IRQ levels */ static void ahciHbaClearInterrupt(PAHCI pAhci) { Log(("%s: Clearing interrupt\n", __FUNCTION__)); PDMDevHlpPCISetIrqNoWait(pAhci->CTX_SUFF(pDevIns), 0, 0); } /** * Updates the IRQ level and sets port bit in the global interrupt status register of the HBA. */ static void ahciHbaSetInterrupt(PAHCI pAhci, uint8_t iPort) { Log(("P%u: %s: Setting interrupt\n", iPort, __FUNCTION__)); PDMCritSectEnter(&pAhci->lock, VINF_SUCCESS); if (pAhci->regHbaCtrl & AHCI_HBA_CTRL_IE) { if ((pAhci->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN) && (pAhci->regHbaCccPorts & (1 << iPort))) { pAhci->uCccCurrentNr++; if (pAhci->uCccCurrentNr >= pAhci->uCccNr) { /* Reset command completion coalescing state. */ TMTimerSetMillies(pAhci->CTX_SUFF(pHbaCccTimer), pAhci->uCccTimeout); pAhci->uCccCurrentNr = 0; pAhci->u32PortsInterrupted |= (1 << pAhci->uCccPortNr); if (!(pAhci->u32PortsInterrupted & ~(1 << pAhci->uCccPortNr))) { Log(("P%u: %s: Fire interrupt\n", iPort, __FUNCTION__)); PDMDevHlpPCISetIrqNoWait(pAhci->CTX_SUFF(pDevIns), 0, 1); } } } else { /* If only the bit of the actual port is set assert an interrupt * because the interrupt status register was already read by the guest * and we need to send a new notification. * Otherwise an interrupt is still pending. */ ASMAtomicOrU32((volatile uint32_t *)&pAhci->u32PortsInterrupted, (1 << iPort)); if (!(pAhci->u32PortsInterrupted & ~(1 << iPort))) { Log(("P%u: %s: Fire interrupt\n", iPort, __FUNCTION__)); PDMDevHlpPCISetIrqNoWait(pAhci->CTX_SUFF(pDevIns), 0, 1); } } } PDMCritSectLeave(&pAhci->lock); } #ifdef IN_RING3 /* * Assert irq when an CCC timeout occurs */ DECLCALLBACK(void) ahciCccTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser) { PAHCI pAhci = (PAHCI)pvUser; ahciHbaSetInterrupt(pAhci, pAhci->uCccPortNr); } #endif static int PortCmdIssue_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { uint32_t uCIValue; ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); /* Update the CI register first. */ uCIValue = ASMAtomicXchgU32(&pAhciPort->u32TasksFinished, 0); pAhciPort->regCI &= ~uCIValue; if ((pAhciPort->regCMD & AHCI_PORT_CMD_ST) && (u32Value > 0)) { PDEVPORTNOTIFIERQUEUEITEM pItem; /* Mark the tasks set in the value as used. */ for (uint8_t i = 0; i < AHCI_NR_COMMAND_SLOTS; i++) { /* Queue task if bit is set in written value and not already in progress. */ if (((u32Value >> i) & 0x01) && !(pAhciPort->regCI & (1 << i))) { if (!pAhciPort->fAsyncInterface) { /* Put the tag number of the task into the FIFO. */ uint8_t uTag = AHCI_TASK_SET(i, ((pAhciPort->regSACT & (1 << i)) ? 1 : 0)); ASMAtomicWriteU8(&pAhciPort->ahciIOTasks[pAhciPort->uActWritePos], uTag); ahciLog(("%s: Before uActWritePos=%u\n", __FUNCTION__, pAhciPort->uActWritePos)); pAhciPort->uActWritePos++; pAhciPort->uActWritePos %= RT_ELEMENTS(pAhciPort->ahciIOTasks); ahciLog(("%s: After uActWritePos=%u\n", __FUNCTION__, pAhciPort->uActWritePos)); ASMAtomicIncU32(&pAhciPort->uActTasksActive); bool fNotificationSend = ASMAtomicXchgBool(&pAhciPort->fNotificationSend, true); if (!fNotificationSend) { /* Send new notification. */ pItem = (PDEVPORTNOTIFIERQUEUEITEM)PDMQueueAlloc(ahci->CTX_SUFF(pNotifierQueue)); AssertMsg(pItem, ("Allocating item for queue failed\n")); pItem->iPort = pAhciPort->iLUN; PDMQueueInsert(ahci->CTX_SUFF(pNotifierQueue), (PPDMQUEUEITEMCORE)pItem); } } else { pItem = (PDEVPORTNOTIFIERQUEUEITEM)PDMQueueAlloc(ahci->CTX_SUFF(pNotifierQueue)); AssertMsg(pItem, ("Allocating item for queue failed\n")); pItem->iPort = pAhciPort->iLUN; pItem->iTask = i; pItem->fQueued = !!(pAhciPort->regSACT & (1 << i)); /* Mark if the task is queued. */ PDMQueueInsert(ahci->CTX_SUFF(pNotifierQueue), (PPDMQUEUEITEMCORE)pItem); } } } } pAhciPort->regCI |= u32Value; return VINF_SUCCESS; } static int PortCmdIssue_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { uint32_t uCIValue = 0; uCIValue = ASMAtomicXchgU32(&pAhciPort->u32TasksFinished, 0); ahciLog(("%s: read regCI=%#010x uCIValue=%#010x\n", __FUNCTION__, pAhciPort->regCI, uCIValue)); pAhciPort->regCI &= ~uCIValue; *pu32Value = pAhciPort->regCI; return VINF_SUCCESS; } static int PortSActive_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regSACT |= u32Value; return VINF_SUCCESS; } static int PortSActive_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { uint32_t u32TasksFinished = ASMAtomicXchgU32(&pAhciPort->u32QueuedTasksFinished, 0); pAhciPort->regSACT &= ~u32TasksFinished; ahciLog(("%s: read regSACT=%#010x regCI=%#010x u32TasksFinished=%#010x\n", __FUNCTION__, pAhciPort->regSACT, pAhciPort->regCI, u32TasksFinished)); *pu32Value = pAhciPort->regSACT; return VINF_SUCCESS; } static int PortSError_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); if ( (u32Value & AHCI_PORT_SERR_X) && (pAhciPort->regSERR & AHCI_PORT_SERR_X)) { ASMAtomicAndU32(&pAhciPort->regIS, ~AHCI_PORT_IS_PCS); pAhciPort->regTFD |= ATA_STAT_ERR; pAhciPort->regTFD &= ~(ATA_STAT_DRQ | ATA_STAT_BUSY); } pAhciPort->regSERR &= ~u32Value; return VINF_SUCCESS; } static int PortSError_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regSERR=%#010x\n", __FUNCTION__, pAhciPort->regSERR)); *pu32Value = pAhciPort->regSERR; return VINF_SUCCESS; } static int PortSControl_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SCTL_IPM_GET(u32Value), AHCI_PORT_SCTL_SPD_GET(u32Value), AHCI_PORT_SCTL_DET_GET(u32Value))); if ((u32Value & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_INIT) { ASMAtomicXchgBool(&pAhciPort->fPortReset, true); pAhciPort->regSSTS = 0; pAhciPort->regSIG = ~0; pAhciPort->regTFD = 0x7f; pAhciPort->fFirstD2HFisSend = false; } else if ((u32Value & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_NINIT && pAhciPort->pDrvBase && (pAhciPort->regSCTL & AHCI_PORT_SCTL_DET) == AHCI_PORT_SCTL_DET_INIT) { #ifndef IN_RING3 return VINF_IOM_HC_MMIO_WRITE; #else if (pAhciPort->pDrvBase) { /* Reset queue. */ pAhciPort->uActWritePos = 0; pAhciPort->uActReadPos = 0; ASMAtomicXchgBool(&pAhciPort->fPortReset, false); /* Signature for SATA device. */ if (pAhciPort->fATAPI) pAhciPort->regSIG = AHCI_PORT_SIG_ATAPI; else pAhciPort->regSIG = AHCI_PORT_SIG_DISK; pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x03 << 0); /* Device detected and communication established. */ /* * Use the maximum allowed speed. * (Not that it changes anything really) */ switch (AHCI_PORT_SCTL_SPD_GET(pAhciPort->regSCTL)) { case 0x01: pAhciPort->regSSTS |= (0x01 << 4); /* Generation 1 (1.5GBps) speed. */ break; case 0x02: case 0x00: default: pAhciPort->regSSTS |= (0x02 << 4); /* Generation 2 (3.0GBps) speed. */ break; } /* We received a COMINIT from the device. Tell the guest. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_PCS); pAhciPort->regSERR |= AHCI_PORT_SERR_X; pAhciPort->regTFD |= ATA_STAT_BUSY; if ((pAhciPort->regCMD & AHCI_PORT_CMD_FRE) && (!pAhciPort->fFirstD2HFisSend)) { ahciPostFirstD2HFisIntoMemory(pAhciPort); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) ahciHbaSetInterrupt(pAhciPort->CTX_SUFF(pAhci), pAhciPort->iLUN); } } #endif } pAhciPort->regSCTL = u32Value; return VINF_SUCCESS; } static int PortSControl_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regSCTL=%#010x\n", __FUNCTION__, pAhciPort->regSCTL)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SCTL_IPM_GET(pAhciPort->regSCTL), AHCI_PORT_SCTL_SPD_GET(pAhciPort->regSCTL), AHCI_PORT_SCTL_DET_GET(pAhciPort->regSCTL))); *pu32Value = pAhciPort->regSCTL; return VINF_SUCCESS; } static int PortSStatus_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regSSTS=%#010x\n", __FUNCTION__, pAhciPort->regSSTS)); ahciLog(("%s: IPM=%d SPD=%d DET=%d\n", __FUNCTION__, AHCI_PORT_SSTS_IPM_GET(pAhciPort->regSSTS), AHCI_PORT_SSTS_SPD_GET(pAhciPort->regSSTS), AHCI_PORT_SSTS_DET_GET(pAhciPort->regSSTS))); *pu32Value = pAhciPort->regSSTS; return VINF_SUCCESS; } static int PortSignature_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regSIG=%#010x\n", __FUNCTION__, pAhciPort->regSIG)); *pu32Value = pAhciPort->regSIG; return VINF_SUCCESS; } static int PortTaskFileData_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regTFD=%#010x\n", __FUNCTION__, pAhciPort->regTFD)); ahciLog(("%s: ERR=%x BSY=%d DRQ=%d ERR=%d\n", __FUNCTION__, (pAhciPort->regTFD >> 8), (pAhciPort->regTFD & AHCI_PORT_TFD_BSY) >> 7, (pAhciPort->regTFD & AHCI_PORT_TFD_DRQ) >> 3, (pAhciPort->regTFD & AHCI_PORT_TFD_ERR))); *pu32Value = pAhciPort->regTFD; return VINF_SUCCESS; } /** * Read from the port command register. */ static int PortCmd_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regCMD=%#010x\n", __FUNCTION__, pAhciPort->regCMD)); ahciLog(("%s: ICC=%d ASP=%d ALPE=%d DLAE=%d ATAPI=%d CPD=%d ISP=%d HPCP=%d PMA=%d CPS=%d CR=%d FR=%d ISS=%d CCS=%d FRE=%d CLO=%d POD=%d SUD=%d ST=%d\n", __FUNCTION__, (pAhciPort->regCMD & AHCI_PORT_CMD_ICC) >> 28, (pAhciPort->regCMD & AHCI_PORT_CMD_ASP) >> 27, (pAhciPort->regCMD & AHCI_PORT_CMD_ALPE) >> 26, (pAhciPort->regCMD & AHCI_PORT_CMD_DLAE) >> 25, (pAhciPort->regCMD & AHCI_PORT_CMD_ATAPI) >> 24, (pAhciPort->regCMD & AHCI_PORT_CMD_CPD) >> 20, (pAhciPort->regCMD & AHCI_PORT_CMD_ISP) >> 19, (pAhciPort->regCMD & AHCI_PORT_CMD_HPCP) >> 18, (pAhciPort->regCMD & AHCI_PORT_CMD_PMA) >> 17, (pAhciPort->regCMD & AHCI_PORT_CMD_CPS) >> 16, (pAhciPort->regCMD & AHCI_PORT_CMD_CR) >> 15, (pAhciPort->regCMD & AHCI_PORT_CMD_FR) >> 14, (pAhciPort->regCMD & AHCI_PORT_CMD_ISS) >> 13, (pAhciPort->regCMD & AHCI_PORT_CMD_CCS) >> 8, (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) >> 4, (pAhciPort->regCMD & AHCI_PORT_CMD_CLO) >> 3, (pAhciPort->regCMD & AHCI_PORT_CMD_POD) >> 2, (pAhciPort->regCMD & AHCI_PORT_CMD_SUD) >> 1, (pAhciPort->regCMD & AHCI_PORT_CMD_ST))); *pu32Value = pAhciPort->regCMD; return VINF_SUCCESS; } /** * Write to the port command register. * This is the register where all the data transfer is started */ static int PortCmd_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { int rc = VINF_SUCCESS; ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: ICC=%d ASP=%d ALPE=%d DLAE=%d ATAPI=%d CPD=%d ISP=%d HPCP=%d PMA=%d CPS=%d CR=%d FR=%d ISS=%d CCS=%d FRE=%d CLO=%d POD=%d SUD=%d ST=%d\n", __FUNCTION__, (u32Value & AHCI_PORT_CMD_ICC) >> 28, (u32Value & AHCI_PORT_CMD_ASP) >> 27, (u32Value & AHCI_PORT_CMD_ALPE) >> 26, (u32Value & AHCI_PORT_CMD_DLAE) >> 25, (u32Value & AHCI_PORT_CMD_ATAPI) >> 24, (u32Value & AHCI_PORT_CMD_CPD) >> 20, (u32Value & AHCI_PORT_CMD_ISP) >> 19, (u32Value & AHCI_PORT_CMD_HPCP) >> 18, (u32Value & AHCI_PORT_CMD_PMA) >> 17, (u32Value & AHCI_PORT_CMD_CPS) >> 16, (u32Value & AHCI_PORT_CMD_CR) >> 15, (u32Value & AHCI_PORT_CMD_FR) >> 14, (u32Value & AHCI_PORT_CMD_ISS) >> 13, (u32Value & AHCI_PORT_CMD_CCS) >> 8, (u32Value & AHCI_PORT_CMD_FRE) >> 4, (u32Value & AHCI_PORT_CMD_CLO) >> 3, (u32Value & AHCI_PORT_CMD_POD) >> 2, (u32Value & AHCI_PORT_CMD_SUD) >> 1, (u32Value & AHCI_PORT_CMD_ST))); if (pAhciPort->fPoweredOn && pAhciPort->fSpunUp) { if (u32Value & AHCI_PORT_CMD_CLO) { ahciLog(("%s: Command list override requested\n", __FUNCTION__)); u32Value &= ~(AHCI_PORT_TFD_BSY | AHCI_PORT_TFD_DRQ); /* Clear the CLO bit. */ u32Value &= ~(AHCI_PORT_CMD_CLO); } if (u32Value & AHCI_PORT_CMD_ST) { ahciLog(("%s: Engine starts\n", __FUNCTION__)); /** Set engine state to running. */ u32Value |= AHCI_PORT_CMD_CR; } else { ahciLog(("%s: Engine stops\n", __FUNCTION__)); /* Clear command issue register. */ pAhciPort->regCI = 0; /** Clear current command slot. */ u32Value &= ~(AHCI_PORT_CMD_CCS_SHIFT(0xff)); u32Value &= ~AHCI_PORT_CMD_CR; } } else if (pAhciPort->pDrvBase) { if ((u32Value & AHCI_PORT_CMD_POD) && (pAhciPort->regCMD & AHCI_PORT_CMD_CPS) && !pAhciPort->fPoweredOn) { ahciLog(("%s: Power on the device\n", __FUNCTION__)); pAhciPort->fPoweredOn = true; /* * Set states in the Port Signature and SStatus registers. */ pAhciPort->regSIG = 0x101; /* Signature for SATA device. */ pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x02 << 4) | /* Generation 2 (3.0GBps) speed. */ (0x03 << 0); /* Device detected and communication established. */ if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { #ifndef IN_RING3 return VINF_IOM_HC_MMIO_WRITE; #else ahciPostFirstD2HFisIntoMemory(pAhciPort); ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) ahciHbaSetInterrupt(pAhciPort->CTX_SUFF(pAhci), pAhciPort->iLUN); #endif } } if ((u32Value & AHCI_PORT_CMD_SUD) && pAhciPort->fPoweredOn && !pAhciPort->fSpunUp) { ahciLog(("%s: Spin up the device\n", __FUNCTION__)); pAhciPort->fSpunUp = true; } } if (u32Value & AHCI_PORT_CMD_FRE) { ahciLog(("%s: FIS receive enabled\n", __FUNCTION__)); u32Value |= AHCI_PORT_CMD_FR; /* Send the first D2H FIS only if it wasn't already send. */ if (!pAhciPort->fFirstD2HFisSend) { #ifndef IN_RING3 return VINF_IOM_HC_MMIO_WRITE; #else ahciPostFirstD2HFisIntoMemory(pAhciPort); pAhciPort->fFirstD2HFisSend = true; #endif } } else if (!(u32Value & AHCI_PORT_CMD_FRE)) { ahciLog(("%s: FIS receive disabled\n", __FUNCTION__)); u32Value &= ~AHCI_PORT_CMD_FR; } pAhciPort->regCMD = u32Value; return rc; } /** * Read from the port interrupt enable register. */ static int PortIntrEnable_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regIE=%#010x\n", __FUNCTION__, pAhciPort->regIE)); ahciLog(("%s: CPDE=%d TFEE=%d HBFE=%d HBDE=%d IFE=%d INFE=%d OFE=%d IPME=%d PRCE=%d DIE=%d PCE=%d DPE=%d UFE=%d SDBE=%d DSE=%d PSE=%d DHRE=%d\n", __FUNCTION__, (pAhciPort->regIE & AHCI_PORT_IE_CPDE) >> 31, (pAhciPort->regIE & AHCI_PORT_IE_TFEE) >> 30, (pAhciPort->regIE & AHCI_PORT_IE_HBFE) >> 29, (pAhciPort->regIE & AHCI_PORT_IE_HBDE) >> 28, (pAhciPort->regIE & AHCI_PORT_IE_IFE) >> 27, (pAhciPort->regIE & AHCI_PORT_IE_INFE) >> 26, (pAhciPort->regIE & AHCI_PORT_IE_OFE) >> 24, (pAhciPort->regIE & AHCI_PORT_IE_IPME) >> 23, (pAhciPort->regIE & AHCI_PORT_IE_PRCE) >> 22, (pAhciPort->regIE & AHCI_PORT_IE_DIE) >> 7, (pAhciPort->regIE & AHCI_PORT_IE_PCE) >> 6, (pAhciPort->regIE & AHCI_PORT_IE_DPE) >> 5, (pAhciPort->regIE & AHCI_PORT_IE_UFE) >> 4, (pAhciPort->regIE & AHCI_PORT_IE_SDBE) >> 3, (pAhciPort->regIE & AHCI_PORT_IE_DSE) >> 2, (pAhciPort->regIE & AHCI_PORT_IE_PSE) >> 1, (pAhciPort->regIE & AHCI_PORT_IE_DHRE))); *pu32Value = pAhciPort->regIE; return VINF_SUCCESS; } /** * Write to the port interrupt enable register. */ static int PortIntrEnable_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahciLog(("%s: CPDE=%d TFEE=%d HBFE=%d HBDE=%d IFE=%d INFE=%d OFE=%d IPME=%d PRCE=%d DIE=%d PCE=%d DPE=%d UFE=%d SDBE=%d DSE=%d PSE=%d DHRE=%d\n", __FUNCTION__, (u32Value & AHCI_PORT_IE_CPDE) >> 31, (u32Value & AHCI_PORT_IE_TFEE) >> 30, (u32Value & AHCI_PORT_IE_HBFE) >> 29, (u32Value & AHCI_PORT_IE_HBDE) >> 28, (u32Value & AHCI_PORT_IE_IFE) >> 27, (u32Value & AHCI_PORT_IE_INFE) >> 26, (u32Value & AHCI_PORT_IE_OFE) >> 24, (u32Value & AHCI_PORT_IE_IPME) >> 23, (u32Value & AHCI_PORT_IE_PRCE) >> 22, (u32Value & AHCI_PORT_IE_DIE) >> 7, (u32Value & AHCI_PORT_IE_PCE) >> 6, (u32Value & AHCI_PORT_IE_DPE) >> 5, (u32Value & AHCI_PORT_IE_UFE) >> 4, (u32Value & AHCI_PORT_IE_SDBE) >> 3, (u32Value & AHCI_PORT_IE_DSE) >> 2, (u32Value & AHCI_PORT_IE_PSE) >> 1, (u32Value & AHCI_PORT_IE_DHRE))); pAhciPort->regIE = (u32Value & AHCI_PORT_IE_READONLY); /* Check if some a interrupt status bit changed*/ uint32_t u32IntrStatus = ASMAtomicReadU32(&pAhciPort->regIS); if (pAhciPort->regIE & u32IntrStatus) ahciHbaSetInterrupt(ahci, pAhciPort->iLUN); return VINF_SUCCESS; } /** * Read from the port interrupt status register. */ static int PortIntrSts_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regIS=%#010x\n", __FUNCTION__, pAhciPort->regIS)); ahciLog(("%s: CPDS=%d TFES=%d HBFS=%d HBDS=%d IFS=%d INFS=%d OFS=%d IPMS=%d PRCS=%d DIS=%d PCS=%d DPS=%d UFS=%d SDBS=%d DSS=%d PSS=%d DHRS=%d\n", __FUNCTION__, (pAhciPort->regIS & AHCI_PORT_IS_CPDS) >> 31, (pAhciPort->regIS & AHCI_PORT_IS_TFES) >> 30, (pAhciPort->regIS & AHCI_PORT_IS_HBFS) >> 29, (pAhciPort->regIS & AHCI_PORT_IS_HBDS) >> 28, (pAhciPort->regIS & AHCI_PORT_IS_IFS) >> 27, (pAhciPort->regIS & AHCI_PORT_IS_INFS) >> 26, (pAhciPort->regIS & AHCI_PORT_IS_OFS) >> 24, (pAhciPort->regIS & AHCI_PORT_IS_IPMS) >> 23, (pAhciPort->regIS & AHCI_PORT_IS_PRCS) >> 22, (pAhciPort->regIS & AHCI_PORT_IS_DIS) >> 7, (pAhciPort->regIS & AHCI_PORT_IS_PCS) >> 6, (pAhciPort->regIS & AHCI_PORT_IS_DPS) >> 5, (pAhciPort->regIS & AHCI_PORT_IS_UFS) >> 4, (pAhciPort->regIS & AHCI_PORT_IS_SDBS) >> 3, (pAhciPort->regIS & AHCI_PORT_IS_DSS) >> 2, (pAhciPort->regIS & AHCI_PORT_IS_PSS) >> 1, (pAhciPort->regIS & AHCI_PORT_IS_DHRS))); *pu32Value = pAhciPort->regIS; return VINF_SUCCESS; } /** * Write to the port interrupt status register. */ static int PortIntrSts_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ASMAtomicAndU32(&pAhciPort->regIS, ~(u32Value & AHCI_PORT_IS_READONLY)); return VINF_SUCCESS; } /** * Read from the port FIS base address upper 32bit register. */ static int PortFisAddrUp_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regFBU=%#010x\n", __FUNCTION__, pAhciPort->regFBU)); *pu32Value = pAhciPort->regFBU; return VINF_SUCCESS; } /** * Write to the port FIS base address upper 32bit register. */ static int PortFisAddrUp_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regFBU = u32Value; pAhciPort->GCPhysAddrFb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regFBU, pAhciPort->regFB); return VINF_SUCCESS; } /** * Read from the port FIS base address register. */ static int PortFisAddr_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regFB=%#010x\n", __FUNCTION__, pAhciPort->regFB)); *pu32Value = pAhciPort->regFB; return VINF_SUCCESS; } /** * Write to the port FIS base address register. */ static int PortFisAddr_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regFB = (u32Value & AHCI_PORT_FB_RESERVED); pAhciPort->GCPhysAddrFb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regFBU, pAhciPort->regFB); return VINF_SUCCESS; } /** * Write to the port command list base address upper 32bit register. */ static int PortCmdLstAddrUp_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regCLBU = u32Value; pAhciPort->GCPhysAddrClb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regCLBU, pAhciPort->regCLB); return VINF_SUCCESS; } /** * Read from the port command list base address upper 32bit register. */ static int PortCmdLstAddrUp_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regCLBU=%#010x\n", __FUNCTION__, pAhciPort->regCLBU)); *pu32Value = pAhciPort->regCLBU; return VINF_SUCCESS; } /** * Read from the port command list base address register. */ static int PortCmdLstAddr_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: read regCLB=%#010x\n", __FUNCTION__, pAhciPort->regCLB)); *pu32Value = pAhciPort->regCLB; return VINF_SUCCESS; } /** * Write to the port command list base address register. */ static int PortCmdLstAddr_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); pAhciPort->regCLB = (u32Value & AHCI_PORT_CLB_RESERVED); pAhciPort->GCPhysAddrClb = AHCI_RTGCPHYS_FROM_U32(pAhciPort->regCLBU, pAhciPort->regCLB); return VINF_SUCCESS; } /** * Read from the global Version register. */ static int HbaVersion_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaVs=%#010x\n", __FUNCTION__, ahci->regHbaVs)); *pu32Value = ahci->regHbaVs; return VINF_SUCCESS; } /** * Read from the global Ports implemented register. */ static int HbaPortsImplemented_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaPi=%#010x\n", __FUNCTION__, ahci->regHbaPi)); *pu32Value = ahci->regHbaPi; return VINF_SUCCESS; } /** * Write to the global interrupt status register. */ static int HbaInterruptStatus_w(PAHCI ahci, uint32_t iReg, uint32_t u32Value) { int rc; Log(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); rc = PDMCritSectEnter(&ahci->lock, VINF_IOM_HC_MMIO_WRITE); if (rc != VINF_SUCCESS) return rc; if (u32Value > 0) { /* * Clear the interrupt only if no port has signalled * an interrupt and the guest has cleared all set interrupt * notification bits. */ bool fClear = true; ahci->regHbaIs &= ~(u32Value); fClear = (!ahci->u32PortsInterrupted) && (!ahci->regHbaIs); if (fClear) { unsigned i = 0; /* Check if the cleared ports have a interrupt status bit set. */ while ((u32Value > 0) && (i < AHCI_MAX_NR_PORTS_IMPL)) { if (u32Value & 0x01) { PAHCIPort pAhciPort = &ahci->ahciPort[i]; if (pAhciPort->regIE & pAhciPort->regIS) { Log(("%s: Interrupt status of port %u set -> Set interrupt again\n", __FUNCTION__, i)); ASMAtomicOrU32(&ahci->u32PortsInterrupted, 1 << i); fClear = false; break; } } u32Value = u32Value >> 1; i++; } } if (fClear) ahciHbaClearInterrupt(ahci); else { Log(("%s: Not clearing interrupt: u32PortsInterrupted=%#010x\n", __FUNCTION__, ahci->u32PortsInterrupted)); /* * We need to set the interrupt again because the I/O APIC does not set it again even if the * line is still high. * We need to clear it first because the PCI bus only calls the interrupt controller if the state changes. */ PDMDevHlpPCISetIrqNoWait(ahci->CTX_SUFF(pDevIns), 0, 0); PDMDevHlpPCISetIrqNoWait(ahci->CTX_SUFF(pDevIns), 0, 1); } } PDMCritSectLeave(&ahci->lock); return VINF_SUCCESS; } /** * Read from the global interrupt status register. */ static int HbaInterruptStatus_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { uint32_t u32PortsInterrupted; int rc; rc = PDMCritSectEnter(&ahci->lock, VINF_IOM_HC_MMIO_READ); if (rc != VINF_SUCCESS) return rc; u32PortsInterrupted = ASMAtomicXchgU32(&ahci->u32PortsInterrupted, 0); PDMCritSectLeave(&ahci->lock); Log(("%s: read regHbaIs=%#010x u32PortsInterrupted=%#010x\n", __FUNCTION__, ahci->regHbaIs, u32PortsInterrupted)); ahci->regHbaIs |= u32PortsInterrupted; #ifdef LOG_ENABLED Log(("%s:", __FUNCTION__)); unsigned i; for (i = 0; i < ahci->cPortsImpl; i++) { if ((ahci->regHbaIs >> i) & 0x01) Log((" P%d", i)); } Log(("\n")); #endif *pu32Value = ahci->regHbaIs; return VINF_SUCCESS; } /** * Write to the global control register. */ static int HbaControl_w(PAHCI ahci, uint32_t iReg, uint32_t u32Value) { Log(("%s: write u32Value=%#010x\n" "%s: AE=%d IE=%d HR=%d\n", __FUNCTION__, u32Value, __FUNCTION__, (u32Value & AHCI_HBA_CTRL_AE) >> 31, (u32Value & AHCI_HBA_CTRL_IE) >> 1, (u32Value & AHCI_HBA_CTRL_HR))); ahci->regHbaCtrl = (u32Value & AHCI_HBA_CTRL_RW_MASK) | AHCI_HBA_CTRL_AE; if (ahci->regHbaCtrl & AHCI_HBA_CTRL_HR) ahciHBAReset(ahci); return VINF_SUCCESS; } /** * Read the global control register. */ static int HbaControl_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaCtrl=%#010x\n" "%s: AE=%d IE=%d HR=%d\n", __FUNCTION__, ahci->regHbaCtrl, __FUNCTION__, (ahci->regHbaCtrl & AHCI_HBA_CTRL_AE) >> 31, (ahci->regHbaCtrl & AHCI_HBA_CTRL_IE) >> 1, (ahci->regHbaCtrl & AHCI_HBA_CTRL_HR))); *pu32Value = ahci->regHbaCtrl; return VINF_SUCCESS; } /** * Read the global capabilities register. */ static int HbaCapabilities_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaCap=%#010x\n" "%s: S64A=%d SNCQ=%d SIS=%d SSS=%d SALP=%d SAL=%d SCLO=%d ISS=%d SNZO=%d SAM=%d SPM=%d PMD=%d SSC=%d PSC=%d NCS=%d NP=%d\n", __FUNCTION__, ahci->regHbaCap, __FUNCTION__, (ahci->regHbaCap & AHCI_HBA_CAP_S64A) >> 31, (ahci->regHbaCap & AHCI_HBA_CAP_SNCQ) >> 30, (ahci->regHbaCap & AHCI_HBA_CAP_SIS) >> 28, (ahci->regHbaCap & AHCI_HBA_CAP_SSS) >> 27, (ahci->regHbaCap & AHCI_HBA_CAP_SALP) >> 26, (ahci->regHbaCap & AHCI_HBA_CAP_SAL) >> 25, (ahci->regHbaCap & AHCI_HBA_CAP_SCLO) >> 24, (ahci->regHbaCap & AHCI_HBA_CAP_ISS) >> 20, (ahci->regHbaCap & AHCI_HBA_CAP_SNZO) >> 19, (ahci->regHbaCap & AHCI_HBA_CAP_SAM) >> 18, (ahci->regHbaCap & AHCI_HBA_CAP_SPM) >> 17, (ahci->regHbaCap & AHCI_HBA_CAP_PMD) >> 15, (ahci->regHbaCap & AHCI_HBA_CAP_SSC) >> 14, (ahci->regHbaCap & AHCI_HBA_CAP_PSC) >> 13, (ahci->regHbaCap & AHCI_HBA_CAP_NCS) >> 8, (ahci->regHbaCap & AHCI_HBA_CAP_NP))); *pu32Value = ahci->regHbaCap; return VINF_SUCCESS; } /** * Write to the global command completion coalescing control register. */ static int HbaCccCtl_w(PAHCI ahci, uint32_t iReg, uint32_t u32Value) { Log(("%s: write u32Value=%#010x\n" "%s: TV=%d CC=%d INT=%d EN=%d\n", __FUNCTION__, u32Value, __FUNCTION__, AHCI_HBA_CCC_CTL_TV_GET(u32Value), AHCI_HBA_CCC_CTL_CC_GET(u32Value), AHCI_HBA_CCC_CTL_INT_GET(u32Value), (u32Value & AHCI_HBA_CCC_CTL_EN))); ahci->regHbaCccCtl = u32Value; ahci->uCccTimeout = AHCI_HBA_CCC_CTL_TV_GET(u32Value); ahci->uCccPortNr = AHCI_HBA_CCC_CTL_INT_GET(u32Value); ahci->uCccNr = AHCI_HBA_CCC_CTL_CC_GET(u32Value); if (u32Value & AHCI_HBA_CCC_CTL_EN) { /* Arm the timer */ TMTimerSetMillies(ahci->CTX_SUFF(pHbaCccTimer), ahci->uCccTimeout); } else { TMTimerStop(ahci->CTX_SUFF(pHbaCccTimer)); } return VINF_SUCCESS; } /** * Read the global command completion coalescing control register. */ static int HbaCccCtl_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaCccCtl=%#010x\n" "%s: TV=%d CC=%d INT=%d EN=%d\n", __FUNCTION__, ahci->regHbaCccCtl, __FUNCTION__, AHCI_HBA_CCC_CTL_TV_GET(ahci->regHbaCccCtl), AHCI_HBA_CCC_CTL_CC_GET(ahci->regHbaCccCtl), AHCI_HBA_CCC_CTL_INT_GET(ahci->regHbaCccCtl), (ahci->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN))); *pu32Value = ahci->regHbaCccCtl; return VINF_SUCCESS; } /** * Write to the global command completion coalescing ports register. */ static int HbaCccPorts_w(PAHCI ahci, uint32_t iReg, uint32_t u32Value) { Log(("%s: write u32Value=%#010x\n", __FUNCTION__, u32Value)); ahci->regHbaCccPorts = u32Value; return VINF_SUCCESS; } /** * Read the global command completion coalescing ports register. */ static int HbaCccPorts_r(PAHCI ahci, uint32_t iReg, uint32_t *pu32Value) { Log(("%s: read regHbaCccPorts=%#010x\n", __FUNCTION__, ahci->regHbaCccPorts)); #ifdef LOG_ENABLED Log(("%s:", __FUNCTION__)); unsigned i; for (i = 0; i < ahci->cPortsImpl; i++) { if ((ahci->regHbaCccPorts >> i) & 0x01) Log((" P%d", i)); } Log(("\n")); #endif *pu32Value = ahci->regHbaCccPorts; return VINF_SUCCESS; } /** * Invalid write to global register */ static int HbaInvalid_w(PAHCI ahci, uint32_t iReg, uint32_t u32Value) { Log(("%s: Write denied!!! iReg=%u u32Value=%#010x\n", __FUNCTION__, iReg, u32Value)); return VINF_SUCCESS; } /** * Invalid Port write. */ static int PortInvalid_w(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t u32Value) { ahciLog(("%s: Write denied!!! iReg=%u u32Value=%#010x\n", __FUNCTION__, iReg, u32Value)); return VINF_SUCCESS; } /** * Invalid Port read. */ static int PortInvalid_r(PAHCI ahci, PAHCIPort pAhciPort, uint32_t iReg, uint32_t *pu32Value) { ahciLog(("%s: Read denied!!! iReg=%u\n", __FUNCTION__, iReg)); return VINF_SUCCESS; } /** * Register descriptor table for global HBA registers */ static const AHCIOPREG g_aOpRegs[] = { {"HbaCapabilites", HbaCapabilities_r, HbaInvalid_w}, /* Readonly */ {"HbaControl" , HbaControl_r, HbaControl_w}, {"HbaInterruptStatus", HbaInterruptStatus_r, HbaInterruptStatus_w}, {"HbaPortsImplemented", HbaPortsImplemented_r, HbaInvalid_w}, /* Readonly */ {"HbaVersion", HbaVersion_r, HbaInvalid_w}, /* ReadOnly */ {"HbaCccCtl", HbaCccCtl_r, HbaCccCtl_w}, {"HbaCccPorts", HbaCccPorts_r, HbaCccPorts_w}, }; /** * Register descriptor table for port registers */ static const AHCIPORTOPREG g_aPortOpRegs[] = { {"PortCmdLstAddr", PortCmdLstAddr_r, PortCmdLstAddr_w}, {"PortCmdLstAddrUp", PortCmdLstAddrUp_r, PortCmdLstAddrUp_w}, {"PortFisAddr", PortFisAddr_r, PortFisAddr_w}, {"PortFisAddrUp", PortFisAddrUp_r, PortFisAddrUp_w}, {"PortIntrSts", PortIntrSts_r, PortIntrSts_w}, {"PortIntrEnable", PortIntrEnable_r, PortIntrEnable_w}, {"PortCmd", PortCmd_r, PortCmd_w}, {"PortReserved1", PortInvalid_r, PortInvalid_w}, /* Not used. */ {"PortTaskFileData", PortTaskFileData_r, PortInvalid_w}, /* Readonly */ {"PortSignature", PortSignature_r, PortInvalid_w}, /* Readonly */ {"PortSStatus", PortSStatus_r, PortInvalid_w}, /* Readonly */ {"PortSControl", PortSControl_r, PortSControl_w}, {"PortSError", PortSError_r, PortSError_w}, {"PortSActive", PortSActive_r, PortSActive_w}, {"PortCmdIssue", PortCmdIssue_r, PortCmdIssue_w}, {"PortReserved2", PortInvalid_r, PortInvalid_w}, /* Not used. */ }; /** * Reset initiated by system software for one port. * * @param pAhciPort The port to reset. */ static void ahciPortSwReset(PAHCIPort pAhciPort) { pAhciPort->regIS = 0; pAhciPort->regIE = 0; pAhciPort->regCMD = AHCI_PORT_CMD_CPD | /* Cold presence detection */ AHCI_PORT_CMD_SUD | /* Device has spun up. */ AHCI_PORT_CMD_POD; /* Port is powered on. */ pAhciPort->regTFD = (1 << 8) | ATA_STAT_SEEK | ATA_STAT_WRERR; pAhciPort->regSIG = ~0; pAhciPort->regSSTS = 0; pAhciPort->regSCTL = 0; pAhciPort->regSERR = 0; pAhciPort->regSACT = 0; pAhciPort->regCI = 0; pAhciPort->fResetDevice = false; pAhciPort->fPoweredOn = true; pAhciPort->fSpunUp = true; pAhciPort->fNotificationSend = false; pAhciPort->cMultSectors = ATA_MAX_MULT_SECTORS; pAhciPort->uATATransferMode = ATA_MODE_UDMA | 6; pAhciPort->u32TasksFinished = 0; pAhciPort->u32QueuedTasksFinished = 0; pAhciPort->uActWritePos = 0; pAhciPort->uActReadPos = 0; pAhciPort->uActTasksActive = 0; if (pAhciPort->pDrvBase) { pAhciPort->regCMD |= AHCI_PORT_CMD_CPS; /* Indicate that there is a device on that port */ if (pAhciPort->fPoweredOn) { /* * Set states in the Port Signature and SStatus registers. */ pAhciPort->regSIG = 0x101; /* Signature for SATA device. */ pAhciPort->regSSTS = (0x01 << 8) | /* Interface is active. */ (0x02 << 4) | /* Generation 2 (3.0GBps) speed. */ (0x03 << 0); /* Device detected and communication established. */ } } } #ifdef IN_RING3 /** * Hardware reset used for machine power on and reset. * * @param pAhciport The port to reset. */ static void ahciPortHwReset(PAHCIPort pAhciPort) { /* Reset the address registers. */ pAhciPort->regCLB = 0; pAhciPort->regCLBU = 0; pAhciPort->regFB = 0; pAhciPort->regFBU = 0; /* Reset calculated addresses. */ pAhciPort->GCPhysAddrClb = 0; pAhciPort->GCPhysAddrFb = 0; } #endif /** * Create implemented ports bitmap. * * @returns 32bit bitmask with a bit set for every implemented port. * @param cPorts Number of ports. */ static uint32_t ahciGetPortsImplemented(unsigned cPorts) { uint32_t uPortsImplemented = 0; for (unsigned i = 0; i < cPorts; i++) uPortsImplemented |= (1 << i); return uPortsImplemented; } /** * Reset the entire HBA. * * @param pThis The HBA state. */ static void ahciHBAReset(PAHCI pThis) { unsigned i; int rc = VINF_SUCCESS; LogFlow(("Reset the HBA controller\n")); /* Stop the CCC timer. */ if (pThis->regHbaCccCtl & AHCI_HBA_CCC_CTL_EN) { rc = TMTimerStop(pThis->CTX_SUFF(pHbaCccTimer)); if (RT_FAILURE(rc)) AssertMsgFailed(("%s: Failed to stop timer!\n", __FUNCTION__)); } /* Reset every port */ for (i = 0; i < pThis->cPortsImpl; i++) { PAHCIPort pAhciPort = &pThis->ahciPort[i]; pAhciPort->iLUN = i; ahciPortSwReset(pAhciPort); } /* Init Global registers */ pThis->regHbaCap = AHCI_HBA_CAP_ISS_SHIFT(AHCI_HBA_CAP_ISS_GEN2) | AHCI_HBA_CAP_S64A | /* 64bit addressing supported */ AHCI_HBA_CAP_SAM | /* AHCI mode only */ AHCI_HBA_CAP_SNCQ | /* Support native command queuing */ AHCI_HBA_CAP_SSS | /* Staggered spin up */ AHCI_HBA_CAP_CCCS | /* Support command completion coalescing */ AHCI_HBA_CAP_NCS_SET(AHCI_NR_COMMAND_SLOTS) | /* Number of command slots we support */ AHCI_HBA_CAP_NP_SET(pThis->cPortsImpl); /* Number of supported ports */ pThis->regHbaCtrl = AHCI_HBA_CTRL_AE; pThis->regHbaIs = 0; pThis->regHbaPi = ahciGetPortsImplemented(pThis->cPortsImpl); pThis->regHbaVs = AHCI_HBA_VS_MJR | AHCI_HBA_VS_MNR; pThis->regHbaCccCtl = 0; pThis->regHbaCccPorts = 0; pThis->uCccTimeout = 0; pThis->uCccPortNr = 0; pThis->uCccNr = 0; pThis->f64BitAddr = false; pThis->u32PortsInterrupted = 0; pThis->f8ByteMMIO4BytesWrittenSuccessfully = false; /* Clear the HBA Reset bit */ pThis->regHbaCtrl &= ~AHCI_HBA_CTRL_HR; } /** * Memory mapped I/O Handler for read operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param GCPhysAddr Physical address (in GC) where the read starts. * @param pv Where to store the result. * @param cb Number of bytes read. */ PDMBOTHCBDECL(int) ahciMMIORead(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); int rc = VINF_SUCCESS; /* Break up 64 bits reads into two dword reads. */ if (cb == 8) { rc = ahciMMIORead(pDevIns, pvUser, GCPhysAddr, pv, 4); if (RT_FAILURE(rc)) return rc; return ahciMMIORead(pDevIns, pvUser, GCPhysAddr + 4, (uint8_t *)pv + 4, 4); } Log2(("#%d ahciMMIORead: pvUser=%p:{%.*Rhxs} cb=%d GCPhysAddr=%RGp rc=%Rrc\n", pDevIns->iInstance, pv, cb, pv, cb, GCPhysAddr, rc)); /* * If the access offset is smaller than AHCI_HBA_GLOBAL_SIZE the guest accesses the global registers. * Otherwise it accesses the registers of a port. */ uint32_t uOffset = (GCPhysAddr - pAhci->MMIOBase); uint32_t iReg; if (uOffset < AHCI_HBA_GLOBAL_SIZE) { iReg = uOffset >> 2; Log3(("%s: Trying to read from global register %u\n", __FUNCTION__, iReg)); if (iReg < RT_ELEMENTS(g_aOpRegs)) { const AHCIOPREG *pReg = &g_aOpRegs[iReg]; rc = pReg->pfnRead(pAhci, iReg, (uint32_t *)pv); } else { Log3(("%s: Trying to read global register %u/%u!!!\n", __FUNCTION__, iReg, RT_ELEMENTS(g_aOpRegs))); *(uint32_t *)pv = 0; } } else { uint32_t iRegOffset; uint32_t iPort; /* Calculate accessed port. */ uOffset -= AHCI_HBA_GLOBAL_SIZE; iPort = uOffset / AHCI_PORT_REGISTER_SIZE; iRegOffset = (uOffset % AHCI_PORT_REGISTER_SIZE); iReg = iRegOffset >> 2; Log3(("%s: Trying to read from port %u and register %u\n", __FUNCTION__, iPort, iReg)); if (RT_LIKELY( iPort < pAhci->cPortsImpl && iReg < RT_ELEMENTS(g_aPortOpRegs))) { const AHCIPORTOPREG *pPortReg = &g_aPortOpRegs[iReg]; rc = pPortReg->pfnRead(pAhci, &pAhci->ahciPort[iPort], iReg, (uint32_t *)pv); } else { Log3(("%s: Trying to read port %u register %u/%u!!!\n", __FUNCTION__, iPort, iReg, RT_ELEMENTS(g_aPortOpRegs))); rc = VINF_IOM_MMIO_UNUSED_00; } /* * Windows Vista tries to read one byte from some registers instead of four. * Correct the value according to the read size. */ if (RT_SUCCESS(rc) && cb != sizeof(uint32_t)) { switch (cb) { case 1: { uint8_t uNewValue; uint8_t *p = (uint8_t *)pv; iRegOffset &= 3; Log3(("%s: iRegOffset=%u\n", __FUNCTION__, iRegOffset)); uNewValue = p[iRegOffset]; /* Clear old value */ *(uint32_t *)pv = 0; *(uint8_t *)pv = uNewValue; break; } default: AssertMsgFailed(("%s: unsupported access width cb=%d uOffset=%x iPort=%x iRegOffset=%x iReg=%x!!!\n", __FUNCTION__, cb, uOffset, iPort, iRegOffset, iReg)); } } } Log2(("#%d ahciMMIORead: return pvUser=%p:{%.*Rhxs} cb=%d GCPhysAddr=%RGp rc=%Rrc\n", pDevIns->iInstance, pv, cb, pv, cb, GCPhysAddr, rc)); return rc; } /** * Memory mapped I/O Handler for write operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param GCPhysAddr Physical address (in GC) where the read starts. * @param pv Where to fetch the result. * @param cb Number of bytes to write. */ PDMBOTHCBDECL(int) ahciMMIOWrite(PPDMDEVINS pDevIns, void *pvUser, RTGCPHYS GCPhysAddr, void *pv, unsigned cb) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); int rc = VINF_SUCCESS; /* Break up 64 bits writes into two dword writes. */ if (cb == 8) { /* * Only write the first 4 bytes if they weren't already. * It is possible that the last write to the register caused a world * switch and we entered this function again. * Writing the first 4 bytes again could cause indeterminate behavior * which can cause errors in the guest. */ if (!pAhci->f8ByteMMIO4BytesWrittenSuccessfully) { rc = ahciMMIOWrite(pDevIns, pvUser, GCPhysAddr, pv, 4); if (rc != VINF_SUCCESS) return rc; pAhci->f8ByteMMIO4BytesWrittenSuccessfully = true; } rc = ahciMMIOWrite(pDevIns, pvUser, GCPhysAddr + 4, (uint8_t *)pv + 4, 4); /* * Reset flag again so that the first 4 bytes are written again on the next * 8byte MMIO access. */ if (rc == VINF_SUCCESS) pAhci->f8ByteMMIO4BytesWrittenSuccessfully = false; return rc; } Log2(("#%d ahciMMIOWrite: pvUser=%p:{%.*Rhxs} cb=%d GCPhysAddr=%RGp\n", pDevIns->iInstance, pv, cb, pv, cb, GCPhysAddr)); /* Validate access. */ if (cb != sizeof(uint32_t)) { Log2(("%s: Bad write size!!! GCPhysAddr=%RGp cb=%d\n", __FUNCTION__, GCPhysAddr, cb)); return VINF_SUCCESS; } if (GCPhysAddr & 0x3) { Log2(("%s: Unaligned write!!! GCPhysAddr=%RGp cb=%d\n", __FUNCTION__, GCPhysAddr, cb)); return VINF_SUCCESS; } /* * If the access offset is smaller than 100h the guest accesses the global registers. * Otherwise it accesses the registers of a port. */ uint32_t uOffset = (GCPhysAddr - pAhci->MMIOBase); uint32_t iReg; if (uOffset < AHCI_HBA_GLOBAL_SIZE) { Log3(("Write global HBA register\n")); iReg = uOffset >> 2; if (iReg < RT_ELEMENTS(g_aOpRegs)) { const AHCIOPREG *pReg = &g_aOpRegs[iReg]; rc = pReg->pfnWrite(pAhci, iReg, *(uint32_t *)pv); } else { Log3(("%s: Trying to write global register %u/%u!!!\n", __FUNCTION__, iReg, RT_ELEMENTS(g_aOpRegs))); rc = VINF_SUCCESS; } } else { uint32_t iPort; Log3(("Write Port register\n")); /* Calculate accessed port. */ uOffset -= AHCI_HBA_GLOBAL_SIZE; iPort = uOffset / AHCI_PORT_REGISTER_SIZE; iReg = (uOffset % AHCI_PORT_REGISTER_SIZE) >> 2; Log3(("%s: Trying to write to port %u and register %u\n", __FUNCTION__, iPort, iReg)); if (RT_LIKELY( iPort < pAhci->cPortsImpl && iReg < RT_ELEMENTS(g_aPortOpRegs))) { const AHCIPORTOPREG *pPortReg = &g_aPortOpRegs[iReg]; rc = pPortReg->pfnWrite(pAhci, &pAhci->ahciPort[iPort], iReg, *(uint32_t *)pv); } else { Log3(("%s: Trying to write port %u register %u/%u!!!\n", __FUNCTION__, iPort, iReg, RT_ELEMENTS(g_aPortOpRegs))); rc = VINF_SUCCESS; } } return rc; } PDMBOTHCBDECL(int) ahciIOPortWrite1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortWrite1(pCtl, Port, u32, cb); } PDMBOTHCBDECL(int) ahciIOPortRead1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortRead1(pCtl, Port, pu32, cb); } PDMBOTHCBDECL(int) ahciIOPortWrite2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortWrite2(pCtl, Port, u32, cb); } PDMBOTHCBDECL(int) ahciIOPortRead2(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortRead2(pCtl, Port, pu32, cb); } PDMBOTHCBDECL(int) ahciLegacyFakeWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { AssertMsgFailed(("Should not happen\n")); return VINF_SUCCESS; } PDMBOTHCBDECL(int) ahciLegacyFakeRead(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { AssertMsgFailed(("Should not happen\n")); return VINF_SUCCESS; } #ifndef IN_RING0 /** * Port I/O Handler for primary port range IN string operations. * @see FNIOMIOPORTINSTRING for details. */ PDMBOTHCBDECL(int) ahciIOPortReadStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortReadStr1(pCtl, Port, pGCPtrDst, pcTransfer, cb); } /** * Port I/O Handler for primary port range OUT string operations. * @see FNIOMIOPORTOUTSTRING for details. */ PDMBOTHCBDECL(int) ahciIOPortWriteStr1(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb) { uint32_t iChannel = (uint32_t)(uintptr_t)pvUser; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIATACONTROLLER pCtl = &pAhci->aCts[iChannel]; Assert(iChannel < 2); return ataControllerIOPortReadStr1(pCtl, Port, pGCPtrSrc, pcTransfer, cb); } #endif /* !IN_RING0 */ #ifdef IN_RING3 static DECLCALLBACK(int) ahciR3MMIOMap(PPCIDEVICE pPciDev, /*unsigned*/ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType) { PAHCI pThis = PCIDEV_2_PAHCI(pPciDev); PPDMDEVINS pDevIns = pPciDev->pDevIns; int rc = VINF_SUCCESS; Log2(("%s: registering MMIO area at GCPhysAddr=%RGp cb=%u\n", __FUNCTION__, GCPhysAddress, cb)); Assert(enmType == PCI_ADDRESS_SPACE_MEM); Assert(cb >= 4352); /* We use the assigned size here, because we currently only support page aligned MMIO ranges. */ rc = PDMDevHlpMMIORegister(pDevIns, GCPhysAddress, cb, NULL, ahciMMIOWrite, ahciMMIORead, NULL, "AHCI"); if (RT_FAILURE(rc)) return rc; if (pThis->fR0Enabled) { rc = PDMDevHlpMMIORegisterR0(pDevIns, GCPhysAddress, cb, 0, "ahciMMIOWrite", "ahciMMIORead", NULL); if (RT_FAILURE(rc)) return rc; } if (pThis->fGCEnabled) { rc = PDMDevHlpMMIORegisterRC(pDevIns, GCPhysAddress, cb, 0, "ahciMMIOWrite", "ahciMMIORead", NULL); if (RT_FAILURE(rc)) return rc; } pThis->MMIOBase = GCPhysAddress; return rc; } /** * Map the legacy I/O port ranges to make Solaris work with the controller. */ static DECLCALLBACK(int) ahciR3LegacyFakeIORangeMap(PPCIDEVICE pPciDev, /*unsigned*/ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType) { PAHCI pThis = PCIDEV_2_PAHCI(pPciDev); PPDMDEVINS pDevIns = pPciDev->pDevIns; int rc = VINF_SUCCESS; Log2(("%s: registering fake I/O area at GCPhysAddr=%RGp cb=%u\n", __FUNCTION__, GCPhysAddress, cb)); Assert(enmType == PCI_ADDRESS_SPACE_IO); /* We use the assigned size here, because we currently only support page aligned MMIO ranges. */ rc = PDMDevHlpIOPortRegister(pDevIns, (RTIOPORT)GCPhysAddress, cb, NULL, ahciLegacyFakeWrite, ahciLegacyFakeRead, NULL, NULL, "AHCI Fake"); if (RT_FAILURE(rc)) return rc; if (pThis->fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, (RTIOPORT)GCPhysAddress, cb, 0, "ahciLegacyFakeWrite", "ahciLegacyFakeRead", NULL, NULL, "AHCI Fake"); if (RT_FAILURE(rc)) return rc; } if (pThis->fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, (RTIOPORT)GCPhysAddress, cb, 0, "ahciLegacyFakeWrite", "ahciLegacyFakeRead", NULL, NULL, "AHCI Fake"); if (RT_FAILURE(rc)) return rc; } return rc; } /* -=-=-=-=-=- PAHCI::ILeds -=-=-=-=-=- */ /** * Gets the pointer to the status LED of a unit. * * @returns VBox status code. * @param pInterface Pointer to the interface structure containing the called function pointer. * @param iLUN The unit which status LED we desire. * @param ppLed Where to store the LED pointer. */ static DECLCALLBACK(int) ahciR3Status_QueryStatusLed(PPDMILEDPORTS pInterface, unsigned iLUN, PPDMLED *ppLed) { PAHCI pAhci = PDMILEDPORTS_2_PAHCI(pInterface); if (iLUN < AHCI_MAX_NR_PORTS_IMPL) { *ppLed = &pAhci->ahciPort[iLUN].Led; Assert((*ppLed)->u32Magic == PDMLED_MAGIC); return VINF_SUCCESS; } return VERR_PDM_LUN_NOT_FOUND; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ahciR3Status_QueryInterface(PPDMIBASE pInterface, const char *pszIID) { PAHCI pThis = PDMIBASE_2_PAHCI(pInterface); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMILEDPORTS, &pThis->ILeds); return NULL; } /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) ahciR3PortQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PAHCIPort pAhciPort = PDMIBASE_2_PAHCIPORT(pInterface); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pAhciPort->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBLOCKPORT, &pAhciPort->IPort); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBLOCKASYNCPORT, &pAhciPort->IPortAsync); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUNTNOTIFY, &pAhciPort->IMountNotify); return NULL; } #ifdef DEBUG /** * Dump info about the FIS * * @returns nothing * @param pAhciPort The port the command FIS was read from. * @param cmdFis The FIS to print info from. */ static void ahciDumpFisInfo(PAHCIPort pAhciPort, uint8_t *cmdFis) { ahciLog(("%s: *** Begin FIS info dump. ***\n", __FUNCTION__)); /* Print FIS type. */ switch (cmdFis[AHCI_CMDFIS_TYPE]) { case AHCI_CMDFIS_TYPE_H2D: { ahciLog(("%s: Command Fis type: H2D\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d bytes\n", __FUNCTION__, AHCI_CMDFIS_TYPE_H2D_SIZE)); if (cmdFis[AHCI_CMDFIS_BITS] & AHCI_CMDFIS_C) { ahciLog(("%s: Command register update\n", __FUNCTION__)); } else { ahciLog(("%s: Control register update\n", __FUNCTION__)); } ahciLog(("%s: CMD=%#04x \"%s\"\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CMD], ATACmdText(cmdFis[AHCI_CMDFIS_CMD]))); ahciLog(("%s: FEAT=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_FET])); ahciLog(("%s: SECTN=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTN])); ahciLog(("%s: CYLL=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLL])); ahciLog(("%s: CYLH=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLH])); ahciLog(("%s: HEAD=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_HEAD])); ahciLog(("%s: SECTNEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTNEXP])); ahciLog(("%s: CYLLEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLLEXP])); ahciLog(("%s: CYLHEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CYLHEXP])); ahciLog(("%s: FETEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_FETEXP])); ahciLog(("%s: SECTC=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTC])); ahciLog(("%s: SECTCEXP=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_SECTCEXP])); ahciLog(("%s: CTL=%#04x\n", __FUNCTION__, cmdFis[AHCI_CMDFIS_CTL])); if (cmdFis[AHCI_CMDFIS_CTL] & AHCI_CMDFIS_CTL_SRST) { ahciLog(("%s: Reset bit is set\n", __FUNCTION__)); } } break; case AHCI_CMDFIS_TYPE_D2H: { ahciLog(("%s: Command Fis type D2H\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_D2H_SIZE)); } break; case AHCI_CMDFIS_TYPE_SETDEVBITS: { ahciLog(("%s: Command Fis type Set Device Bits\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE)); } break; case AHCI_CMDFIS_TYPE_DMAACTD2H: { ahciLog(("%s: Command Fis type DMA Activate H2D\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_DMAACTD2H_SIZE)); } break; case AHCI_CMDFIS_TYPE_DMASETUP: { ahciLog(("%s: Command Fis type DMA Setup\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_DMASETUP_SIZE)); } break; case AHCI_CMDFIS_TYPE_PIOSETUP: { ahciLog(("%s: Command Fis type PIO Setup\n", __FUNCTION__)); ahciLog(("%s: Command Fis size: %d\n", __FUNCTION__, AHCI_CMDFIS_TYPE_PIOSETUP_SIZE)); } break; case AHCI_CMDFIS_TYPE_DATA: { ahciLog(("%s: Command Fis type Data\n", __FUNCTION__)); } break; default: ahciLog(("%s: ERROR Unknown command FIS type\n", __FUNCTION__)); break; } ahciLog(("%s: *** End FIS info dump. ***\n", __FUNCTION__)); } /** * Dump info about the command header * * @returns nothing * @param pAhciPort Poitner to the port the command header was read from. * @param pCmdHdr The command header to print info from. */ static void ahciDumpCmdHdrInfo(PAHCIPort pAhciPort, CmdHdr *pCmdHdr) { ahciLog(("%s: *** Begin command header info dump. ***\n", __FUNCTION__)); ahciLog(("%s: Number of Scatter/Gatther List entries: %u\n", __FUNCTION__, AHCI_CMDHDR_PRDTL_ENTRIES(pCmdHdr->u32DescInf))); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_C) ahciLog(("%s: Clear busy upon R_OK\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_B) ahciLog(("%s: BIST Fis\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_R) ahciLog(("%s: Device Reset Fis\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_P) ahciLog(("%s: Command prefetchable\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_W) ahciLog(("%s: Device write\n", __FUNCTION__)); else ahciLog(("%s: Device read\n", __FUNCTION__)); if (pCmdHdr->u32DescInf & AHCI_CMDHDR_A) ahciLog(("%s: ATAPI command\n", __FUNCTION__)); else ahciLog(("%s: ATA command\n", __FUNCTION__)); ahciLog(("%s: Command FIS length %u DW\n", __FUNCTION__, (pCmdHdr->u32DescInf & AHCI_CMDHDR_CFL_MASK))); ahciLog(("%s: *** End command header info dump. ***\n", __FUNCTION__)); } #endif /* DEBUG */ /** * Post the first D2H FIS from the device into guest memory. * * @returns nothing * @param pAhciPort Pointer to the port which "receives" the FIS. */ static void ahciPostFirstD2HFisIntoMemory(PAHCIPort pAhciPort) { uint8_t d2hFis[AHCI_CMDFIS_TYPE_D2H_SIZE]; pAhciPort->fFirstD2HFisSend = true; ahciLog(("%s: Sending First D2H FIS from FIFO\n", __FUNCTION__)); memset(&d2hFis[0], 0, sizeof(d2hFis)); d2hFis[AHCI_CMDFIS_TYPE] = AHCI_CMDFIS_TYPE_D2H; d2hFis[AHCI_CMDFIS_ERR] = 0x01; d2hFis[AHCI_CMDFIS_STS] = 0x00; /* Set the signature based on the device type. */ if (pAhciPort->fATAPI) { d2hFis[AHCI_CMDFIS_CYLL] = 0x14; d2hFis[AHCI_CMDFIS_CYLH] = 0xeb; } else { d2hFis[AHCI_CMDFIS_CYLL] = 0x00; d2hFis[AHCI_CMDFIS_CYLH] = 0x00; } d2hFis[AHCI_CMDFIS_HEAD] = 0x00; d2hFis[AHCI_CMDFIS_SECTN] = 0x01; d2hFis[AHCI_CMDFIS_SECTC] = 0x01; pAhciPort->regTFD = (1 << 8) | ATA_STAT_SEEK | ATA_STAT_WRERR; ahciPostFisIntoMemory(pAhciPort, AHCI_CMDFIS_TYPE_D2H, d2hFis); } /** * Post the FIS in the memory area allocated by the guest and set interrupt if neccessary. * * @returns VBox status code * @param pAhciPort The port which "receives" the FIS. * @param uFisType The type of the FIS. * @param pCmdFis Pointer to the FIS which is to be posted into memory. */ static int ahciPostFisIntoMemory(PAHCIPort pAhciPort, unsigned uFisType, uint8_t *pCmdFis) { int rc = VINF_SUCCESS; RTGCPHYS GCPhysAddrRecFis = pAhciPort->GCPhysAddrFb; unsigned cbFis = 0; ahciLog(("%s: pAhciPort=%p uFisType=%u pCmdFis=%p\n", __FUNCTION__, pAhciPort, uFisType, pCmdFis)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { AssertMsg(GCPhysAddrRecFis, ("%s: GCPhysAddrRecFis is 0\n", __FUNCTION__)); /* Determine the offset and size of the FIS based on uFisType. */ switch (uFisType) { case AHCI_CMDFIS_TYPE_D2H: { GCPhysAddrRecFis += AHCI_RECFIS_RFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_D2H_SIZE; } break; case AHCI_CMDFIS_TYPE_SETDEVBITS: { GCPhysAddrRecFis += AHCI_RECFIS_SDBFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_SETDEVBITS_SIZE; } break; case AHCI_CMDFIS_TYPE_DMASETUP: { GCPhysAddrRecFis += AHCI_RECFIS_DSFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_DMASETUP_SIZE; } break; case AHCI_CMDFIS_TYPE_PIOSETUP: { GCPhysAddrRecFis += AHCI_RECFIS_PSFIS_OFFSET; cbFis = AHCI_CMDFIS_TYPE_PIOSETUP_SIZE; } break; default: /* * We should post the unknown FIS into memory too but this never happens because * we know which FIS types we generate. ;) */ AssertMsgFailed(("%s: Unknown FIS type!\n", __FUNCTION__)); } /* Post the FIS into memory. */ ahciLog(("%s: PDMDevHlpPhysWrite GCPhysAddrRecFis=%RGp cbFis=%u\n", __FUNCTION__, GCPhysAddrRecFis, cbFis)); PDMDevHlpPhysWrite(pAhciPort->CTX_SUFF(pDevIns), GCPhysAddrRecFis, pCmdFis, cbFis); } return rc; } DECLINLINE(void) ataH2BE_U16(uint8_t *pbBuf, uint16_t val) { pbBuf[0] = val >> 8; pbBuf[1] = val; } DECLINLINE(void) ataH2BE_U24(uint8_t *pbBuf, uint32_t val) { pbBuf[0] = val >> 16; pbBuf[1] = val >> 8; pbBuf[2] = val; } DECLINLINE(void) ataH2BE_U32(uint8_t *pbBuf, uint32_t val) { pbBuf[0] = val >> 24; pbBuf[1] = val >> 16; pbBuf[2] = val >> 8; pbBuf[3] = val; } DECLINLINE(uint16_t) ataBE2H_U16(const uint8_t *pbBuf) { return (pbBuf[0] << 8) | pbBuf[1]; } DECLINLINE(uint32_t) ataBE2H_U24(const uint8_t *pbBuf) { return (pbBuf[0] << 16) | (pbBuf[1] << 8) | pbBuf[2]; } DECLINLINE(uint32_t) ataBE2H_U32(const uint8_t *pbBuf) { return (pbBuf[0] << 24) | (pbBuf[1] << 16) | (pbBuf[2] << 8) | pbBuf[3]; } DECLINLINE(void) ataLBA2MSF(uint8_t *pbBuf, uint32_t iATAPILBA) { iATAPILBA += 150; pbBuf[0] = (iATAPILBA / 75) / 60; pbBuf[1] = (iATAPILBA / 75) % 60; pbBuf[2] = iATAPILBA % 75; } DECLINLINE(uint32_t) ataMSF2LBA(const uint8_t *pbBuf) { return (pbBuf[0] * 60 + pbBuf[1]) * 75 + pbBuf[2]; } static void atapiCmdOK(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; pAhciPortTaskState->cmdFis[AHCI_CMDFIS_SECTN] = (pAhciPortTaskState->cmdFis[AHCI_CMDFIS_SECTN] & ~7) | ((pAhciPortTaskState->enmTxDir != AHCITXDIR_WRITE) ? ATAPI_INT_REASON_IO : 0) | (!pAhciPortTaskState->cbTransfer ? ATAPI_INT_REASON_CD : 0); pAhciPort->uATAPISenseKey = SCSI_SENSE_NONE; pAhciPort->uATAPIASC = SCSI_ASC_NONE; } static void atapiCmdError(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, uint8_t uATAPISenseKey, uint8_t uATAPIASC) { pAhciPortTaskState->uATARegError = uATAPISenseKey << 4; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; pAhciPortTaskState->cmdFis[AHCI_CMDFIS_SECTN] = (pAhciPortTaskState->cmdFis[AHCI_CMDFIS_SECTN] & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; pAhciPort->uATAPISenseKey = uATAPISenseKey; pAhciPort->uATAPIASC = uATAPIASC; } static void ataSCSIPadStr(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i] = *pbSrc++; else pbDst[i] = ' '; } } static void ataPadString(uint8_t *pbDst, const char *pbSrc, uint32_t cbSize) { for (uint32_t i = 0; i < cbSize; i++) { if (*pbSrc) pbDst[i ^ 1] = *pbSrc++; else pbDst[i ^ 1] = ' '; } } static int ahciIdentifySS(PAHCIPort pAhciPort, void *pvBuf) { uint16_t *p; int rc = VINF_SUCCESS; p = (uint16_t *)pvBuf; memset(p, 0, 512); p[0] = RT_H2LE_U16(0x0040); p[1] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383)); p[3] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cHeads); /* Block size; obsolete, but required for the BIOS. */ p[5] = RT_H2LE_U16(512); p[6] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cSectors); ataPadString((uint8_t *)(p + 10), pAhciPort->szSerialNumber, AHCI_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ p[22] = RT_H2LE_U16(0); /* ECC bytes per sector */ ataPadString((uint8_t *)(p + 23), pAhciPort->szFirmwareRevision, AHCI_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), pAhciPort->szModelNumber, AHCI_MODEL_NUMBER_LENGTH); /* model */ #if ATA_MAX_MULT_SECTORS > 1 p[47] = RT_H2LE_U16(0x8000 | ATA_MAX_MULT_SECTORS); #endif p[48] = RT_H2LE_U16(1); /* dword I/O, used by the BIOS */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 | 1 << 1 | 1 << 2); /* words 54-58,64-70,88 valid */ p[54] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383)); p[55] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cHeads); p[56] = RT_H2LE_U16(pAhciPort->PCHSGeometry.cSectors); p[57] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors); p[58] = RT_H2LE_U16(RT_MIN(pAhciPort->PCHSGeometry.cCylinders, 16383) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors >> 16); if (pAhciPort->cMultSectors) p[59] = RT_H2LE_U16(0x100 | pAhciPort->cMultSectors); if (pAhciPort->cTotalSectors <= (1 << 28) - 1) { p[60] = RT_H2LE_U16(pAhciPort->cTotalSectors); p[61] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 16); } else { /* Report maximum number of sectors possible with LBA28 */ p[60] = RT_H2LE_U16(((1 << 28) - 1) & 0xffff); p[61] = RT_H2LE_U16(((1 << 28) - 1) >> 16); } p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ p[82] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* supports power management, write cache and look-ahead */ p[83] = RT_H2LE_U16(1 << 14 | 1 << 10 | 1 << 12 | 1 << 13); /* supports LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 3 | 1 << 5 | 1 << 6); /* enabled power management, write cache and look-ahead */ p[86] = RT_H2LE_U16(1 << 10 | 1 << 12 | 1 << 13); /* enabled LBA48, FLUSH CACHE and FLUSH CACHE EXT */ p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16(0x00); p[100] = RT_H2LE_U16(pAhciPort->cTotalSectors); p[101] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 16); p[102] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 32); p[103] = RT_H2LE_U16(pAhciPort->cTotalSectors >> 48); /* The following are SATA specific */ p[75] = RT_H2LE_U16(31); /* We support 32 commands */ p[76] = RT_H2LE_U16((1 << 8) | (1 << 2)); /* Native command queuing and Serial ATA Gen2 (3.0 Gbps) speed supported */ return VINF_SUCCESS; } typedef int (*PAtapiFunc)(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiGetConfigurationSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiIdentifySS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiInquirySS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiMechanismStatusSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiModeSenseErrorRecoverySS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiModeSenseCDStatusSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadCapacitySS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadDiscInformationSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadTOCNormalSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadTOCMultiSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadTOCRawSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiReadTrackInformationSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); static int atapiRequestSenseSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); //static int atapiPassthroughSS(PAHCIPORTTASKSTATE, PAHCIPort, int *); /** * Source/sink function indexes for g_apfnAtapiFuncs. */ typedef enum ATAPIFN { ATAFN_SS_NULL = 0, ATAFN_SS_ATAPI_GET_CONFIGURATION, ATAFN_SS_ATAPI_IDENTIFY, ATAFN_SS_ATAPI_INQUIRY, ATAFN_SS_ATAPI_MECHANISM_STATUS, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS, ATAFN_SS_ATAPI_READ_CAPACITY, ATAFN_SS_ATAPI_READ_DISC_INFORMATION, ATAFN_SS_ATAPI_READ_TOC_NORMAL, ATAFN_SS_ATAPI_READ_TOC_MULTI, ATAFN_SS_ATAPI_READ_TOC_RAW, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION, ATAFN_SS_ATAPI_REQUEST_SENSE, //ATAFN_SS_ATAPI_PASSTHROUGH, ATAFN_SS_MAX } ATAPIFN; /** * Array of source/sink functions, the index is ATAFNSS. * Make sure ATAFNSS and this array match! */ static const PAtapiFunc g_apfnAtapiFuncs[ATAFN_SS_MAX] = { NULL, atapiGetConfigurationSS, atapiIdentifySS, atapiInquirySS, atapiMechanismStatusSS, atapiModeSenseErrorRecoverySS, atapiModeSenseCDStatusSS, atapiReadCapacitySS, atapiReadDiscInformationSS, atapiReadTOCNormalSS, atapiReadTOCMultiSS, atapiReadTOCRawSS, atapiReadTrackInformationSS, atapiRequestSenseSS //atapiPassthroughSS }; static int atapiIdentifySS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint16_t p[256]; memset(p, 0, 512); /* Removable CDROM, 50us response, 12 byte packets */ p[0] = RT_H2LE_U16(2 << 14 | 5 << 8 | 1 << 7 | 2 << 5 | 0 << 0); ataPadString((uint8_t *)(p + 10), pAhciPort->szSerialNumber, AHCI_SERIAL_NUMBER_LENGTH); /* serial number */ p[20] = RT_H2LE_U16(3); /* XXX: retired, cache type */ p[21] = RT_H2LE_U16(512); /* XXX: retired, cache size in sectors */ ataPadString((uint8_t *)(p + 23), pAhciPort->szFirmwareRevision, AHCI_FIRMWARE_REVISION_LENGTH); /* firmware version */ ataPadString((uint8_t *)(p + 27), pAhciPort->szModelNumber, AHCI_MODEL_NUMBER_LENGTH); /* model */ p[49] = RT_H2LE_U16(1 << 11 | 1 << 9 | 1 << 8); /* DMA and LBA supported */ p[50] = RT_H2LE_U16(1 << 14); /* No drive specific standby timer minimum */ p[51] = RT_H2LE_U16(240); /* PIO transfer cycle */ p[52] = RT_H2LE_U16(240); /* DMA transfer cycle */ p[53] = RT_H2LE_U16(1 << 1 | 1 << 2); /* words 64-70,88 are valid */ p[63] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_MDMA, ATA_MDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* MDMA modes supported / mode enabled */ p[64] = RT_H2LE_U16(ATA_PIO_MODE_MAX > 2 ? (1 << (ATA_PIO_MODE_MAX - 2)) - 1 : 0); /* PIO modes beyond PIO2 supported */ p[65] = RT_H2LE_U16(120); /* minimum DMA multiword tx cycle time */ p[66] = RT_H2LE_U16(120); /* recommended DMA multiword tx cycle time */ p[67] = RT_H2LE_U16(120); /* minimum PIO cycle time without flow control */ p[68] = RT_H2LE_U16(120); /* minimum PIO cycle time with IORDY flow control */ p[73] = RT_H2LE_U16(0x003e); /* ATAPI CDROM major */ p[74] = RT_H2LE_U16(9); /* ATAPI CDROM minor */ p[75] = RT_H2LE_U16(1); /* queue depth 1 */ p[80] = RT_H2LE_U16(0x7e); /* support everything up to ATA/ATAPI-6 */ p[81] = RT_H2LE_U16(0x22); /* conforms to ATA/ATAPI-6 */ p[82] = RT_H2LE_U16(1 << 4 | 1 << 9); /* supports packet command set and DEVICE RESET */ p[83] = RT_H2LE_U16(1 << 14); p[84] = RT_H2LE_U16(1 << 14); p[85] = RT_H2LE_U16(1 << 4 | 1 << 9); /* enabled packet command set and DEVICE RESET */ p[86] = RT_H2LE_U16(0); p[87] = RT_H2LE_U16(1 << 14); p[88] = RT_H2LE_U16(ATA_TRANSFER_ID(ATA_MODE_UDMA, ATA_UDMA_MODE_MAX, pAhciPort->uATATransferMode)); /* UDMA modes supported / mode enabled */ p[93] = RT_H2LE_U16((1 | 1 << 1) << ((pAhciPort->iLUN & 1) == 0 ? 0 : 8) | 1 << 13 | 1 << 14); /* The following are SATA specific */ p[75] = RT_H2LE_U16(31); /* We support 32 commands */ p[76] = RT_H2LE_U16((1 << 8) | (1 << 2)); /* Native command queuing and Serial ATA Gen2 (3.0 Gbps) speed supported */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&p[0], sizeof(p)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadCapacitySS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[8]; ataH2BE_U32(aBuf, pAhciPort->cTotalSectors - 1); ataH2BE_U32(aBuf + 4, 2048); /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadDiscInformationSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[34]; memset(aBuf, '\0', 34); ataH2BE_U16(aBuf, 32); aBuf[2] = (0 << 4) | (3 << 2) | (2 << 0); /* not erasable, complete session, complete disc */ aBuf[3] = 1; /* number of first track */ aBuf[4] = 1; /* number of sessions (LSB) */ aBuf[5] = 1; /* first track number in last session (LSB) */ aBuf[6] = 1; /* last track number in last session (LSB) */ aBuf[7] = (0 << 7) | (0 << 6) | (1 << 5) | (0 << 2) | (0 << 0); /* disc id not valid, disc bar code not valid, unrestricted use, not dirty, not RW medium */ aBuf[8] = 0; /* disc type = CD-ROM */ aBuf[9] = 0; /* number of sessions (MSB) */ aBuf[10] = 0; /* number of sessions (MSB) */ aBuf[11] = 0; /* number of sessions (MSB) */ ataH2BE_U32(aBuf + 16, 0x00ffffff); /* last session lead-in start time is not available */ ataH2BE_U32(aBuf + 20, 0x00ffffff); /* last possible start time for lead-out is not available */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadTrackInformationSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[36]; /* Accept address/number type of 1 only, and only track 1 exists. */ if ((pAhciPortTaskState->aATAPICmd[1] & 0x03) != 1 || ataBE2H_U32(&pAhciPortTaskState->aATAPICmd[2]) != 1) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return VINF_SUCCESS; } memset(aBuf, '\0', 36); ataH2BE_U16(aBuf, 34); aBuf[2] = 1; /* track number (LSB) */ aBuf[3] = 1; /* session number (LSB) */ aBuf[5] = (0 << 5) | (0 << 4) | (4 << 0); /* not damaged, primary copy, data track */ aBuf[6] = (0 << 7) | (0 << 6) | (0 << 5) | (0 << 6) | (1 << 0); /* not reserved track, not blank, not packet writing, not fixed packet, data mode 1 */ aBuf[7] = (0 << 1) | (0 << 0); /* last recorded address not valid, next recordable address not valid */ ataH2BE_U32(aBuf + 8, 0); /* track start address is 0 */ ataH2BE_U32(aBuf + 24, pAhciPort->cTotalSectors); /* track size */ aBuf[32] = 0; /* track number (MSB) */ aBuf[33] = 0; /* session number (MSB) */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiGetConfigurationSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[32]; /* Accept valid request types only, and only starting feature 0. */ if ((pAhciPortTaskState->aATAPICmd[1] & 0x03) == 3 || ataBE2H_U16(&pAhciPortTaskState->aATAPICmd[2]) != 0) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return VINF_SUCCESS; } memset(aBuf, '\0', 32); ataH2BE_U32(aBuf, 16); /** @todo implement switching between CD-ROM and DVD-ROM profile (the only * way to differentiate them right now is based on the image size). Also * implement signalling "no current profile" if no medium is loaded. */ ataH2BE_U16(aBuf + 6, 0x08); /* current profile: read-only CD */ ataH2BE_U16(aBuf + 8, 0); /* feature 0: list of profiles supported */ aBuf[10] = (0 << 2) | (1 << 1) | (1 || 0); /* version 0, persistent, current */ aBuf[11] = 8; /* additional bytes for profiles */ /* The MMC-3 spec says that DVD-ROM read capability should be reported * before CD-ROM read capability. */ ataH2BE_U16(aBuf + 12, 0x10); /* profile: read-only DVD */ aBuf[14] = (0 << 0); /* NOT current profile */ ataH2BE_U16(aBuf + 16, 0x08); /* profile: read only CD */ aBuf[18] = (1 << 0); /* current profile */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiInquirySS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[36]; aBuf[0] = 0x05; /* CD-ROM */ aBuf[1] = 0x80; /* removable */ aBuf[2] = 0x00; /* ISO */ aBuf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ aBuf[4] = 31; /* additional length */ aBuf[5] = 0; /* reserved */ aBuf[6] = 0; /* reserved */ aBuf[7] = 0; /* reserved */ ataSCSIPadStr(aBuf + 8, pAhciPort->szInquiryVendorId, 8); ataSCSIPadStr(aBuf + 16, pAhciPort->szInquiryProductId, 16); ataSCSIPadStr(aBuf + 32, pAhciPort->szInquiryRevision, 4); /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiModeSenseErrorRecoverySS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[16]; ataH2BE_U16(&aBuf[0], 16 + 6); aBuf[2] = 0x70; aBuf[3] = 0; aBuf[4] = 0; aBuf[5] = 0; aBuf[6] = 0; aBuf[7] = 0; aBuf[8] = 0x01; aBuf[9] = 0x06; aBuf[10] = 0x00; aBuf[11] = 0x05; aBuf[12] = 0x00; aBuf[13] = 0x00; aBuf[14] = 0x00; aBuf[15] = 0x00; /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiModeSenseCDStatusSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[40]; ataH2BE_U16(&aBuf[0], 38); aBuf[2] = 0x70; aBuf[3] = 0; aBuf[4] = 0; aBuf[5] = 0; aBuf[6] = 0; aBuf[7] = 0; aBuf[8] = 0x2a; aBuf[9] = 30; /* page length */ aBuf[10] = 0x08; /* DVD-ROM read support */ aBuf[11] = 0x00; /* no write support */ /* The following claims we support audio play. This is obviously false, * but the Linux generic CDROM support makes many features depend on this * capability. If it's not set, this causes many things to be disabled. */ aBuf[12] = 0x71; /* multisession support, mode 2 form 1/2 support, audio play */ aBuf[13] = 0x00; /* no subchannel reads supported */ aBuf[14] = (1 << 0) | (1 << 3) | (1 << 5); /* lock supported, eject supported, tray type loading mechanism */ if (pAhciPort->pDrvMount->pfnIsLocked(pAhciPort->pDrvMount)) aBuf[14] |= 1 << 1; /* report lock state */ aBuf[15] = 0; /* no subchannel reads supported, no separate audio volume control, no changer etc. */ ataH2BE_U16(&aBuf[16], 5632); /* (obsolete) claim 32x speed support */ ataH2BE_U16(&aBuf[18], 2); /* number of audio volume levels */ ataH2BE_U16(&aBuf[20], 128); /* buffer size supported in Kbyte - We don't have a buffer because we write directly into guest memory. Just write the value DevATA is using. */ ataH2BE_U16(&aBuf[22], 5632); /* (obsolete) current read speed 32x */ aBuf[24] = 0; /* reserved */ aBuf[25] = 0; /* reserved for digital audio (see idx 15) */ ataH2BE_U16(&aBuf[26], 0); /* (obsolete) maximum write speed */ ataH2BE_U16(&aBuf[28], 0); /* (obsolete) current write speed */ ataH2BE_U16(&aBuf[30], 0); /* copy management revision supported 0=no CSS */ aBuf[32] = 0; /* reserved */ aBuf[33] = 0; /* reserved */ aBuf[34] = 0; /* reserved */ aBuf[35] = 1; /* rotation control CAV */ ataH2BE_U16(&aBuf[36], 0); /* current write speed */ ataH2BE_U16(&aBuf[38], 0); /* number of write speed performance descriptors */ /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiRequestSenseSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[18]; memset(&aBuf[0], 0, 18); aBuf[0] = 0x70 | (1 << 7); aBuf[2] = pAhciPort->uATAPISenseKey; aBuf[7] = 10; aBuf[12] = pAhciPort->uATAPIASC; /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiMechanismStatusSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[8]; ataH2BE_U16(&aBuf[0], 0); /* no current LBA */ aBuf[2] = 0; aBuf[3] = 0; aBuf[4] = 0; aBuf[5] = 1; ataH2BE_U16(aBuf + 6, 0); /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadTOCNormalSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[20], *q, iStartTrack; bool fMSF; uint32_t cbSize; fMSF = (pAhciPortTaskState->aATAPICmd[1] >> 1) & 1; iStartTrack = pAhciPortTaskState->aATAPICmd[6]; if (iStartTrack > 1 && iStartTrack != 0xaa) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); return VINF_SUCCESS; } q = aBuf + 2; *q++ = 1; /* first session */ *q++ = 1; /* last session */ if (iStartTrack <= 1) { *q++ = 0; /* reserved */ *q++ = 0x14; /* ADR, control */ *q++ = 1; /* track number */ *q++ = 0; /* reserved */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, 0); q += 3; } else { /* sector 0 */ ataH2BE_U32(q, 0); q += 4; } } /* lead out track */ *q++ = 0; /* reserved */ *q++ = 0x14; /* ADR, control */ *q++ = 0xaa; /* track number */ *q++ = 0; /* reserved */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, pAhciPort->cTotalSectors); q += 3; } else { ataH2BE_U32(q, pAhciPort->cTotalSectors); q += 4; } cbSize = q - aBuf; ataH2BE_U16(aBuf, cbSize - 2); /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], cbSize); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadTOCMultiSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[12]; bool fMSF; fMSF = (pAhciPortTaskState->aATAPICmd[1] >> 1) & 1; /* multi session: only a single session defined */ /** @todo double-check this stuff against what a real drive says for a CD-ROM (not a CD-R) with only a single data session. Maybe solve the problem with "cdrdao read-toc" not being able to figure out whether numbers are in BCD or hex. */ memset(aBuf, 0, 12); aBuf[1] = 0x0a; aBuf[2] = 0x01; aBuf[3] = 0x01; aBuf[5] = 0x14; /* ADR, control */ aBuf[6] = 1; /* first track in last complete session */ if (fMSF) { aBuf[8] = 0; /* reserved */ ataLBA2MSF(&aBuf[9], 0); } else { /* sector 0 */ ataH2BE_U32(aBuf + 8, 0); } /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], sizeof(aBuf)); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiReadTOCRawSS(PAHCIPORTTASKSTATE pAhciPortTaskState, PAHCIPort pAhciPort, int *pcbData) { uint8_t aBuf[50]; /* Counted a maximum of 45 bytes but better be on the safe side. */ uint8_t *q, iStartTrack; bool fMSF; uint32_t cbSize; fMSF = (pAhciPortTaskState->aATAPICmd[1] >> 1) & 1; iStartTrack = pAhciPortTaskState->aATAPICmd[6]; q = aBuf + 2; *q++ = 1; /* first session */ *q++ = 1; /* last session */ *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa0; /* first track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* first track */ *q++ = 0x00; /* disk type CD-DA or CD data */ *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa1; /* last track in program area */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ *q++ = 0; *q++ = 1; /* last track */ *q++ = 0; *q++ = 0; *q++ = 1; /* session number */ *q++ = 0x14; /* data track */ *q++ = 0; /* track number */ *q++ = 0xa2; /* lead-out */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, pAhciPort->cTotalSectors); q += 3; } else { ataH2BE_U32(q, pAhciPort->cTotalSectors); q += 4; } *q++ = 1; /* session number */ *q++ = 0x14; /* ADR, control */ *q++ = 0; /* track number */ *q++ = 1; /* point */ *q++ = 0; /* min */ *q++ = 0; /* sec */ *q++ = 0; /* frame */ if (fMSF) { *q++ = 0; /* reserved */ ataLBA2MSF(q, 0); q += 3; } else { /* sector 0 */ ataH2BE_U32(q, 0); q += 4; } cbSize = q - aBuf; ataH2BE_U16(aBuf, cbSize - 2); /* Copy the buffer in to the scatter gather list. */ *pcbData = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, (void *)&aBuf[0], cbSize); atapiCmdOK(pAhciPort, pAhciPortTaskState); return VINF_SUCCESS; } static int atapiDoTransfer(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, ATAPIFN iSourceSink) { int cbTransfered; int rc, rcSourceSink; /* * Create scatter gather list. We use a safe mapping here because it is * possible that the buffer is not a multiple of 512. The normal * creator would assert later here. */ ahciScatterGatherListGetTotalBufferSize(pAhciPort, pAhciPortTaskState); rc = ahciScatterGatherListCreateSafe(pAhciPort, pAhciPortTaskState, false, 0); AssertRC(rc); rcSourceSink = g_apfnAtapiFuncs[iSourceSink](pAhciPortTaskState, pAhciPort, &cbTransfered); pAhciPortTaskState->cmdHdr.u32PRDBC = cbTransfered; rc = ahciScatterGatherListDestroy(pAhciPort, pAhciPortTaskState); AssertRC(rc); /* Write updated command header into memory of the guest. */ PDMDevHlpPhysWrite(pAhciPort->CTX_SUFF(pDevIns), pAhciPortTaskState->GCPhysCmdHdrAddr, &pAhciPortTaskState->cmdHdr, sizeof(CmdHdr)); return rcSourceSink; } static int atapiReadSectors2352PostProcess(PAHCIPORTTASKSTATE pAhciPortTaskState) { uint32_t cSectors = pAhciPortTaskState->cbTransfer / 2048; uint32_t iATAPILBA = pAhciPortTaskState->uOffset / 2048; uint8_t *pbBufDst = (uint8_t *)pAhciPortTaskState->pvBufferUnaligned; uint8_t *pbBufSrc = (uint8_t *)pAhciPortTaskState->pSGListHead[0].pvSeg; for (uint32_t i = iATAPILBA; i < iATAPILBA + cSectors; i++) { /* sync bytes */ *pbBufDst++ = 0x00; memset(pbBufDst, 0xff, 11); pbBufDst += 11; /* MSF */ ataLBA2MSF(pbBufDst, i); pbBufDst += 3; *pbBufDst++ = 0x01; /* mode 1 data */ /* data */ memcpy(pbBufDst, pbBufSrc, 2048); pbBufDst += 2048; pbBufSrc += 2048; /* ECC */ memset(pbBufDst, 0, 288); pbBufDst += 288; } return VINF_SUCCESS; } static int atapiReadSectors(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, uint32_t iATAPILBA, uint32_t cSectors, uint32_t cbSector) { Log(("%s: %d sectors at LBA %d\n", __FUNCTION__, cSectors, iATAPILBA)); switch (cbSector) { case 2048: pAhciPortTaskState->uOffset = iATAPILBA * cbSector; pAhciPortTaskState->cbTransfer = cSectors * cbSector; break; case 2352: { pAhciPortTaskState->pfnPostProcess = atapiReadSectors2352PostProcess; pAhciPortTaskState->uOffset = iATAPILBA * 2048; pAhciPortTaskState->cbTransfer = cSectors * 2048; break; } default: AssertMsgFailed(("Unsupported sectors size\n")); break; } return VINF_SUCCESS; } static int atapiParseCmdVirtualATAPI(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { int iTxDir = PDMBLOCKTXDIR_NONE; const uint8_t *pbPacket; uint32_t cbMax; pbPacket = pAhciPortTaskState->aATAPICmd; ahciLog(("%s: ATAPI CMD=%#04x \"%s\"\n", __FUNCTION__, pbPacket[0], SCSICmdText(pbPacket[0]))); switch (pbPacket[0]) { case SCSI_TEST_UNIT_READY: if (pAhciPort->cNotifiedMediaChange > 0) { if (pAhciPort->cNotifiedMediaChange-- > 2) atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); else atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ } else if (pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) atapiCmdOK(pAhciPort, pAhciPortTaskState); else atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_MODE_SENSE_10: { uint8_t uPageControl, uPageCode; cbMax = ataBE2H_U16(pbPacket + 7); uPageControl = pbPacket[2] >> 6; uPageCode = pbPacket[2] & 0x3f; switch (uPageControl) { case SCSI_PAGECONTROL_CURRENT: switch (uPageCode) { case SCSI_MODEPAGE_ERROR_RECOVERY: atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_MODE_SENSE_ERROR_RECOVERY); break; case SCSI_MODEPAGE_CD_STATUS: atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_MODE_SENSE_CD_STATUS); break; default: goto error_cmd; } break; case SCSI_PAGECONTROL_CHANGEABLE: goto error_cmd; case SCSI_PAGECONTROL_DEFAULT: goto error_cmd; default: case SCSI_PAGECONTROL_SAVED: atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED); break; } } break; case SCSI_REQUEST_SENSE: cbMax = pbPacket[4]; atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_REQUEST_SENSE); break; case SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL: if (pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { if (pbPacket[4] & 1) pAhciPort->pDrvMount->pfnLock(pAhciPort->pDrvMount); else pAhciPort->pDrvMount->pfnUnlock(pAhciPort->pDrvMount); atapiCmdOK(pAhciPort, pAhciPortTaskState); } else atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; case SCSI_READ_10: case SCSI_READ_12: { uint32_t cSectors, iATAPILBA; if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } if (pbPacket[0] == SCSI_READ_10) cSectors = ataBE2H_U16(pbPacket + 7); else cSectors = ataBE2H_U32(pbPacket + 6); iATAPILBA = ataBE2H_U32(pbPacket + 2); if (cSectors == 0) { atapiCmdOK(pAhciPort, pAhciPortTaskState); break; } if ((uint64_t)iATAPILBA + cSectors > pAhciPort->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("AHCI ATAPI: LUN#%d: CD-ROM block number %Ld invalid (READ)\n", pAhciPort->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } atapiReadSectors(pAhciPort, pAhciPortTaskState, iATAPILBA, cSectors, 2048); iTxDir = AHCITXDIR_READ; } break; case SCSI_READ_CD: { uint32_t cSectors, iATAPILBA; if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cSectors = (pbPacket[6] << 16) | (pbPacket[7] << 8) | pbPacket[8]; iATAPILBA = ataBE2H_U32(pbPacket + 2); if (cSectors == 0) { atapiCmdOK(pAhciPort, pAhciPortTaskState); break; } if ((uint64_t)iATAPILBA + cSectors > pAhciPort->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on reading from places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("AHCI ATA: LUN#%d: CD-ROM block number %Ld invalid (READ CD)\n", pAhciPort->iLUN, (uint64_t)iATAPILBA + cSectors)); uLastLogTS = RTTimeMilliTS(); } atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } switch (pbPacket[9] & 0xf8) { case 0x00: /* nothing */ atapiCmdOK(pAhciPort, pAhciPortTaskState); break; case 0x10: /* normal read */ atapiReadSectors(pAhciPort, pAhciPortTaskState, iATAPILBA, cSectors, 2048); iTxDir = AHCITXDIR_READ; break; case 0xf8: /* read all data */ atapiReadSectors(pAhciPort, pAhciPortTaskState, iATAPILBA, cSectors, 2352); iTxDir = AHCITXDIR_READ; break; default: LogRel(("AHCI ATAPI: LUN#%d: CD-ROM sector format not supported\n", pAhciPort->iLUN)); atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } } break; case SCSI_SEEK_10: { uint32_t iATAPILBA; if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } iATAPILBA = ataBE2H_U32(pbPacket + 2); if (iATAPILBA > pAhciPort->cTotalSectors) { /* Rate limited logging, one log line per second. For * guests that insist on seeking to places outside the * valid area this often generates too many release log * entries otherwise. */ static uint64_t uLastLogTS = 0; if (RTTimeMilliTS() >= uLastLogTS + 1000) { LogRel(("AHCI ATAPI: LUN#%d: CD-ROM block number %Ld invalid (SEEK)\n", pAhciPort->iLUN, (uint64_t)iATAPILBA)); uLastLogTS = RTTimeMilliTS(); } atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_LOGICAL_BLOCK_OOR); break; } atapiCmdOK(pAhciPort, pAhciPortTaskState); pAhciPortTaskState->uATARegStatus |= ATA_STAT_SEEK; /* Linux expects this. */ } break; case SCSI_START_STOP_UNIT: { int rc = VINF_SUCCESS; switch (pbPacket[4] & 3) { case 0: /* 00 - Stop motor */ case 1: /* 01 - Start motor */ break; case 2: /* 10 - Eject media */ /* This must be done from EMT. */ { PAHCI pAhci = pAhciPort->CTX_SUFF(pAhci); PPDMDEVINS pDevIns = pAhci->CTX_SUFF(pDevIns); rc = VMR3ReqCallWait(PDMDevHlpGetVM(pDevIns), VMCPUID_ANY, (PFNRT)pAhciPort->pDrvMount->pfnUnmount, 2, pAhciPort->pDrvMount, false); Assert(RT_SUCCESS(rc) || (rc == VERR_PDM_MEDIA_LOCKED)); } break; case 3: /* 11 - Load media */ /** @todo rc = s->pDrvMount->pfnLoadMedia(s->pDrvMount) */ break; } if (RT_SUCCESS(rc)) atapiCmdOK(pAhciPort, pAhciPortTaskState); else atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED); } break; case SCSI_MECHANISM_STATUS: { cbMax = ataBE2H_U16(pbPacket + 8); atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_MECHANISM_STATUS); } break; case SCSI_READ_TOC_PMA_ATIP: { uint8_t format; if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); /* SCSI MMC-3 spec says format is at offset 2 (lower 4 bits), * but Linux kernel uses offset 9 (topmost 2 bits). Hope that * the other field is clear... */ format = (pbPacket[2] & 0xf) | (pbPacket[9] >> 6); switch (format) { case 0: atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_TOC_NORMAL); break; case 1: atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_TOC_MULTI); break; case 2: atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_TOC_RAW); break; default: error_cmd: atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_INV_FIELD_IN_CMD_PACKET); break; } } break; case SCSI_READ_CAPACITY: if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_CAPACITY); break; case SCSI_READ_DISC_INFORMATION: if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_DISC_INFORMATION); break; case SCSI_READ_TRACK_INFORMATION: if (pAhciPort->cNotifiedMediaChange > 0) { pAhciPort->cNotifiedMediaChange-- ; atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_UNIT_ATTENTION, SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED); /* media changed */ break; } else if (!pAhciPort->pDrvMount->pfnIsMounted(pAhciPort->pDrvMount)) { atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT); break; } cbMax = ataBE2H_U16(pbPacket + 7); atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_READ_TRACK_INFORMATION); break; case SCSI_GET_CONFIGURATION: /* No media change stuff here, it can confuse Linux guests. */ cbMax = ataBE2H_U16(pbPacket + 7); atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_GET_CONFIGURATION); break; case SCSI_INQUIRY: cbMax = pbPacket[4]; atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_INQUIRY); break; default: atapiCmdError(pAhciPort, pAhciPortTaskState, SCSI_SENSE_ILLEGAL_REQUEST, SCSI_ASC_ILLEGAL_OPCODE); break; } return iTxDir; } /** * Reset all values after a reset of the attached storage device. * * @returns nothing * @param pAhciPort The port the device is attached to. * @param pAhciPortTaskState The state to get the tag number from. */ static void ahciFinishStorageDeviceReset(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { /* Send a status good D2H FIS. */ pAhciPort->fResetDevice = false; if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) ahciPostFirstD2HFisIntoMemory(pAhciPort); /* As this is the first D2H FIS after the reset update the signature in the SIG register of the port. */ pAhciPort->regSIG = 0x101; ASMAtomicOrU32(&pAhciPort->u32TasksFinished, (1 << pAhciPortTaskState->uTag)); ahciHbaSetInterrupt(pAhciPort->CTX_SUFF(pAhci), pAhciPort->iLUN); } /** * Build a D2H FIS and post into the memory area of the guest. * * @returns Nothing * @param pAhciPort The port of the SATA controller. * @param pAhciPortTaskState The state of the task. * @param pCmdFis Pointer to the command FIS from the guest. * @param fInterrupt If an interrupt should be send to the guest. */ static void ahciSendD2HFis(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, uint8_t *pCmdFis, bool fInterrupt) { uint8_t d2hFis[20]; bool fAssertIntr = false; PAHCI pAhci = pAhciPort->CTX_SUFF(pAhci); ahciLog(("%s: building D2H Fis\n", __FUNCTION__)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { memset(&d2hFis[0], 0, sizeof(d2hFis)); d2hFis[AHCI_CMDFIS_TYPE] = AHCI_CMDFIS_TYPE_D2H; d2hFis[AHCI_CMDFIS_BITS] = (fInterrupt ? AHCI_CMDFIS_I : 0); d2hFis[AHCI_CMDFIS_STS] = pAhciPortTaskState->uATARegStatus; d2hFis[AHCI_CMDFIS_ERR] = pAhciPortTaskState->uATARegError; d2hFis[AHCI_CMDFIS_SECTN] = pCmdFis[AHCI_CMDFIS_SECTN]; d2hFis[AHCI_CMDFIS_CYLL] = pCmdFis[AHCI_CMDFIS_CYLL]; d2hFis[AHCI_CMDFIS_CYLH] = pCmdFis[AHCI_CMDFIS_CYLH]; d2hFis[AHCI_CMDFIS_HEAD] = pCmdFis[AHCI_CMDFIS_HEAD]; d2hFis[AHCI_CMDFIS_SECTNEXP] = pCmdFis[AHCI_CMDFIS_SECTNEXP]; d2hFis[AHCI_CMDFIS_CYLLEXP] = pCmdFis[AHCI_CMDFIS_CYLLEXP]; d2hFis[AHCI_CMDFIS_CYLHEXP] = pCmdFis[AHCI_CMDFIS_CYLHEXP]; d2hFis[AHCI_CMDFIS_SECTC] = pCmdFis[AHCI_CMDFIS_SECTC]; d2hFis[AHCI_CMDFIS_SECTCEXP] = pCmdFis[AHCI_CMDFIS_SECTCEXP]; /* Update registers. */ pAhciPort->regTFD = (pAhciPortTaskState->uATARegError << 8) | pAhciPortTaskState->uATARegStatus; ahciPostFisIntoMemory(pAhciPort, AHCI_CMDFIS_TYPE_D2H, d2hFis); if (pAhciPortTaskState->uATARegStatus & ATA_STAT_ERR) { /* Error bit is set. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_TFES); if (pAhciPort->regIE & AHCI_PORT_IE_TFEE) fAssertIntr = true; } if (fInterrupt) { ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_DHRS); /* Check if we should assert an interrupt */ if (pAhciPort->regIE & AHCI_PORT_IE_DHRE) fAssertIntr = true; } ASMAtomicOrU32(&pAhciPort->u32TasksFinished, (1 << pAhciPortTaskState->uTag)); if (fAssertIntr) ahciHbaSetInterrupt(pAhci, pAhciPort->iLUN); } } /** * Build a SDB Fis and post it into the memory area of the guest. * * @returns Nothing * @param pAhciPort The port for which the SDB Fis is send. * @param uFinishedTasks Bitmask of finished tasks. * @param pAhciPortTaskState The state of the last task. * @param fInterrupt If an interrupt should be asserted. */ static void ahciSendSDBFis(PAHCIPort pAhciPort, uint32_t uFinishedTasks, PAHCIPORTTASKSTATE pAhciPortTaskState, bool fInterrupt) { uint32_t sdbFis[2]; bool fAssertIntr = false; PAHCI pAhci = pAhciPort->CTX_SUFF(pAhci); ahciLog(("%s: Building SDB FIS\n", __FUNCTION__)); if (pAhciPort->regCMD & AHCI_PORT_CMD_FRE) { memset(&sdbFis[0], 0, sizeof(sdbFis)); sdbFis[0] = AHCI_CMDFIS_TYPE_SETDEVBITS; sdbFis[0] |= (fInterrupt ? (1 << 14) : 0); sdbFis[0] |= pAhciPortTaskState->uATARegError << 24; sdbFis[0] |= (pAhciPortTaskState->uATARegStatus & 0x77) << 16; /* Some bits are marked as reserved and thus are masked out. */ sdbFis[1] = uFinishedTasks; ahciPostFisIntoMemory(pAhciPort, AHCI_CMDFIS_TYPE_SETDEVBITS, (uint8_t *)sdbFis); if (pAhciPortTaskState->uATARegStatus & ATA_STAT_ERR) { /* Error bit is set. */ ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_TFES); if (pAhciPort->regIE & AHCI_PORT_IE_TFEE) fAssertIntr = true; } if (fInterrupt) { ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_SDBS); /* Check if we should assert an interrupt */ if (pAhciPort->regIE & AHCI_PORT_IE_SDBE) fAssertIntr = true; } /* Update registers. */ pAhciPort->regTFD = (pAhciPortTaskState->uATARegError << 8) | pAhciPortTaskState->uATARegStatus; ASMAtomicOrU32(&pAhciPort->u32QueuedTasksFinished, uFinishedTasks); if (fAssertIntr) ahciHbaSetInterrupt(pAhci, pAhciPort->iLUN); } } static uint32_t ahciGetNSectors(uint8_t *pCmdFis, bool fLBA48) { /* 0 means either 256 (LBA28) or 65536 (LBA48) sectors. */ if (fLBA48) { if (!pCmdFis[AHCI_CMDFIS_SECTC] && !pCmdFis[AHCI_CMDFIS_SECTCEXP]) return 65536; else return pCmdFis[AHCI_CMDFIS_SECTCEXP] << 8 | pCmdFis[AHCI_CMDFIS_SECTC]; } else { if (!pCmdFis[AHCI_CMDFIS_SECTC]) return 256; else return pCmdFis[AHCI_CMDFIS_SECTC]; } } static uint64_t ahciGetSector(PAHCIPort pAhciPort, uint8_t *pCmdFis, bool fLBA48) { uint64_t iLBA; if (pCmdFis[AHCI_CMDFIS_HEAD] & 0x40) { /* any LBA variant */ if (fLBA48) { /* LBA48 */ iLBA = ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLHEXP] << 40) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLLEXP] << 32) | ((uint64_t)pCmdFis[AHCI_CMDFIS_SECTNEXP] << 24) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLH] << 16) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; } else { /* LBA */ iLBA = ((pCmdFis[AHCI_CMDFIS_HEAD] & 0x0f) << 24) | (pCmdFis[AHCI_CMDFIS_CYLH] << 16) | (pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; } } else { /* CHS */ iLBA = ((pCmdFis[AHCI_CMDFIS_CYLH] << 8) | pCmdFis[AHCI_CMDFIS_CYLL]) * pAhciPort->PCHSGeometry.cHeads * pAhciPort->PCHSGeometry.cSectors + (pCmdFis[AHCI_CMDFIS_HEAD] & 0x0f) * pAhciPort->PCHSGeometry.cSectors + (pCmdFis[AHCI_CMDFIS_SECTN] - 1); } return iLBA; } static uint64_t ahciGetSectorQueued(uint8_t *pCmdFis) { uint64_t uLBA; uLBA = ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLHEXP] << 40) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLLEXP] << 32) | ((uint64_t)pCmdFis[AHCI_CMDFIS_SECTNEXP] << 24) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLH] << 16) | ((uint64_t)pCmdFis[AHCI_CMDFIS_CYLL] << 8) | pCmdFis[AHCI_CMDFIS_SECTN]; return uLBA; } DECLINLINE(uint32_t) ahciGetNSectorsQueued(uint8_t *pCmdFis) { if (!pCmdFis[AHCI_CMDFIS_FETEXP] && !pCmdFis[AHCI_CMDFIS_FET]) return 65536; else return pCmdFis[AHCI_CMDFIS_FETEXP] << 8 | pCmdFis[AHCI_CMDFIS_FET]; } DECLINLINE(uint8_t) ahciGetTagQueued(uint8_t *pCmdFis) { return pCmdFis[AHCI_CMDFIS_SECTC] >> 3; } static void ahciScatterGatherListGetTotalBufferSize(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { CmdHdr *pCmdHdr = &pAhciPortTaskState->cmdHdr; PPDMDEVINS pDevIns = pAhciPort->CTX_SUFF(pDevIns); unsigned cActualSGEntry; SGLEntry aSGLEntry[32]; /* Holds read sg entries from guest. Biggest seen number of entries a guest set up. */ unsigned cSGLEntriesGCRead; unsigned cSGLEntriesGCLeft; /* Available scatter gather list entries in GC */ RTGCPHYS GCPhysAddrPRDTLEntryStart; /* Start address to read the entries from. */ uint32_t cbSGBuffers = 0; /* Total number of bytes reserved for this request. */ /* Retrieve the total number of bytes reserved for this request. */ cSGLEntriesGCLeft = AHCI_CMDHDR_PRDTL_ENTRIES(pCmdHdr->u32DescInf); ahciLog(("%s: cSGEntriesGC=%u\n", __FUNCTION__, cSGLEntriesGCLeft)); /* Set start address of the entries. */ GCPhysAddrPRDTLEntryStart = AHCI_RTGCPHYS_FROM_U32(pCmdHdr->u32CmdTblAddrUp, pCmdHdr->u32CmdTblAddr) + AHCI_CMDHDR_PRDT_OFFSET; do { cSGLEntriesGCRead = (cSGLEntriesGCLeft < RT_ELEMENTS(aSGLEntry)) ? cSGLEntriesGCLeft : RT_ELEMENTS(aSGLEntry); cSGLEntriesGCLeft -= cSGLEntriesGCRead; /* Read the SG entries. */ PDMDevHlpPhysRead(pDevIns, GCPhysAddrPRDTLEntryStart, &aSGLEntry[0], cSGLEntriesGCRead * sizeof(SGLEntry)); for (cActualSGEntry = 0; cActualSGEntry < cSGLEntriesGCRead; cActualSGEntry++) cbSGBuffers += (aSGLEntry[cActualSGEntry].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; /* Set address to the next entries to read. */ GCPhysAddrPRDTLEntryStart += cSGLEntriesGCRead * sizeof(SGLEntry); } while (cSGLEntriesGCLeft); pAhciPortTaskState->cbSGBuffers = cbSGBuffers; } static int ahciScatterGatherListAllocate(PAHCIPORTTASKSTATE pAhciPortTaskState, uint32_t cSGList, uint32_t cbUnaligned) { if (pAhciPortTaskState->cSGListSize < cSGList) { /* The entries are not allocated yet or the number is too small. */ if (pAhciPortTaskState->cSGListSize) { RTMemFree(pAhciPortTaskState->pSGListHead); RTMemFree(pAhciPortTaskState->paSGEntries); } /* Allocate R3 scatter gather list. */ pAhciPortTaskState->pSGListHead = (PRTSGSEG)RTMemAllocZ(cSGList * sizeof(RTSGSEG)); if (!pAhciPortTaskState->pSGListHead) return VERR_NO_MEMORY; pAhciPortTaskState->paSGEntries = (PAHCIPORTTASKSTATESGENTRY)RTMemAllocZ(cSGList * sizeof(AHCIPORTTASKSTATESGENTRY)); if (!pAhciPortTaskState->paSGEntries) return VERR_NO_MEMORY; /* Reset usage statistics. */ pAhciPortTaskState->cSGListSize = cSGList; pAhciPortTaskState->cSGListTooBig = 0; } else if (pAhciPortTaskState->cSGListSize > cSGList) { /* * The list is too big. Increment counter. * So that the destroying function can free * the list if it is too big too many times * in a row. */ pAhciPortTaskState->cSGListTooBig++; } else { /* * Needed entries matches current size. * Reset counter. */ pAhciPortTaskState->cSGListTooBig = 0; } pAhciPortTaskState->cSGEntries = cSGList; if (pAhciPortTaskState->cbBufferUnaligned < cbUnaligned) { if (pAhciPortTaskState->pvBufferUnaligned) RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); Log(("%s: Allocating buffer for unaligned segments cbUnaligned=%u\n", __FUNCTION__, cbUnaligned)); pAhciPortTaskState->pvBufferUnaligned = RTMemPageAlloc(cbUnaligned); if (!pAhciPortTaskState->pvBufferUnaligned) return VERR_NO_MEMORY; pAhciPortTaskState->cbBufferUnaligned = cbUnaligned; } /* Make debugging easier. */ #ifdef DEBUG memset(pAhciPortTaskState->pSGListHead, 0, pAhciPortTaskState->cSGListSize * sizeof(RTSGSEG)); memset(pAhciPortTaskState->paSGEntries, 0, pAhciPortTaskState->cSGListSize * sizeof(AHCIPORTTASKSTATESGENTRY)); if (pAhciPortTaskState->pvBufferUnaligned) memset(pAhciPortTaskState->pvBufferUnaligned, 0, pAhciPortTaskState->cbBufferUnaligned); #endif return VINF_SUCCESS; } /** * Fallback scatter gather list creator. * Used if the normal one fails in PDMDevHlpPhysGCPhys2CCPtr() or * PDMDevHlpPhysGCPhys2CCPtrReadonly() or post processing * is used. * * returns VBox status code. * @param pAhciPort The ahci port. * @param pAhciPortTaskState The task state which contains the S/G list entries. * @param fReadonly If the mappings should be readonly. * @param cSGEntriesProcessed Number of entries the normal creator procecssed * before an error occurred. Used to free * any ressources allocated before. * @thread EMT */ static int ahciScatterGatherListCreateSafe(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, bool fReadonly, unsigned cSGEntriesProcessed) { CmdHdr *pCmdHdr = &pAhciPortTaskState->cmdHdr; PPDMDEVINS pDevIns = pAhciPort->CTX_SUFF(pDevIns); PAHCIPORTTASKSTATESGENTRY pSGInfoCurr = pAhciPortTaskState->paSGEntries; Assert(VALID_PTR(pAhciPortTaskState->pSGListHead) || !cSGEntriesProcessed); Assert(VALID_PTR(pAhciPortTaskState->paSGEntries) || !cSGEntriesProcessed); for (unsigned cSGEntryCurr = 0; cSGEntryCurr < cSGEntriesProcessed; cSGEntryCurr++) { if (pSGInfoCurr->fGuestMemory) { /* Release the lock. */ PDMDevHlpPhysReleasePageMappingLock(pDevIns, &pSGInfoCurr->u.direct.PageLock); } /* Go to the next entry. */ pSGInfoCurr++; } if (pAhciPortTaskState->pvBufferUnaligned) { RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); pAhciPortTaskState->pvBufferUnaligned = NULL; } if (pAhciPortTaskState->pSGListHead) { RTMemFree(pAhciPortTaskState->pSGListHead); pAhciPortTaskState->pSGListHead = NULL; } if (pAhciPortTaskState->paSGEntries) { RTMemFree(pAhciPortTaskState->paSGEntries); pAhciPortTaskState->paSGEntries = NULL; } pAhciPortTaskState->cSGListTooBig = 0; pAhciPortTaskState->cSGEntries = 1; pAhciPortTaskState->cSGListUsed = 1; pAhciPortTaskState->cSGListSize = 1; pAhciPortTaskState->cbBufferUnaligned = pAhciPortTaskState->cbSGBuffers; /* Allocate new buffers and SG lists. */ pAhciPortTaskState->pvBufferUnaligned = RTMemPageAlloc(pAhciPortTaskState->cbSGBuffers); if (!pAhciPortTaskState->pvBufferUnaligned) return VERR_NO_MEMORY; pAhciPortTaskState->pSGListHead = (PRTSGSEG)RTMemAllocZ(1 * sizeof(RTSGSEG)); if (!pAhciPortTaskState->pSGListHead) { RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); return VERR_NO_MEMORY; } pAhciPortTaskState->paSGEntries = (PAHCIPORTTASKSTATESGENTRY)RTMemAllocZ(1 * sizeof(AHCIPORTTASKSTATESGENTRY)); if (!pAhciPortTaskState->paSGEntries) { RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); RTMemFree(pAhciPortTaskState->pSGListHead); return VERR_NO_MEMORY; } /* Set pointers. */ if (pAhciPortTaskState->cbTransfer) { pAhciPortTaskState->pSGListHead[0].cbSeg = pAhciPortTaskState->cbTransfer; /* Allocate a separate buffer if we have to do post processing . */ if (pAhciPortTaskState->pfnPostProcess) { pAhciPortTaskState->pSGListHead[0].pvSeg = RTMemAlloc(pAhciPortTaskState->cbTransfer); if (!pAhciPortTaskState->pSGListHead[0].pvSeg) { RTMemFree(pAhciPortTaskState->paSGEntries); RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); RTMemFree(pAhciPortTaskState->pSGListHead); return VERR_NO_MEMORY; } } else pAhciPortTaskState->pSGListHead[0].pvSeg = pAhciPortTaskState->pvBufferUnaligned; } else { pAhciPortTaskState->pSGListHead[0].cbSeg = pAhciPortTaskState->cbBufferUnaligned; pAhciPortTaskState->pSGListHead[0].pvSeg = pAhciPortTaskState->pvBufferUnaligned; } pAhciPortTaskState->paSGEntries[0].fGuestMemory = false; pAhciPortTaskState->paSGEntries[0].u.temp.cUnaligned = AHCI_CMDHDR_PRDTL_ENTRIES(pCmdHdr->u32DescInf); pAhciPortTaskState->paSGEntries[0].u.temp.GCPhysAddrBaseFirstUnaligned = AHCI_RTGCPHYS_FROM_U32(pCmdHdr->u32CmdTblAddrUp, pCmdHdr->u32CmdTblAddr) + AHCI_CMDHDR_PRDT_OFFSET; pAhciPortTaskState->paSGEntries[0].u.temp.pvBuf = pAhciPortTaskState->pvBufferUnaligned; if (pAhciPortTaskState->enmTxDir == AHCITXDIR_WRITE) ahciCopyFromSGListIntoBuffer(pDevIns, &pAhciPortTaskState->paSGEntries[0]); return VINF_SUCCESS; } /** * Create scatter gather list descriptors. * * @returns VBox status code. * @param pAhciPort The ahci port. * @param pAhciPortTaskState The task state which contains the S/G list entries. * @param fReadonly If the mappings should be readonly. * @thread EMT */ static int ahciScatterGatherListCreate(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, bool fReadonly) { int rc = VINF_SUCCESS; CmdHdr *pCmdHdr = &pAhciPortTaskState->cmdHdr; PPDMDEVINS pDevIns = pAhciPort->CTX_SUFF(pDevIns); unsigned cActualSGEntry; unsigned cSGEntriesR3 = 0; /* Needed scatter gather list entries in R3. */ unsigned cSGEntriesProcessed = 0; /* Number of SG entries procesed. */ SGLEntry aSGLEntry[32]; /* Holds read sg entries from guest. Biggest seen number of entries a guest set up. */ unsigned cSGLEntriesGCRead; unsigned cSGLEntriesGCLeft; /* Available scatter gather list entries in GC */ RTGCPHYS GCPhysAddrPRDTLEntryStart; /* Start address to read the entries from. */ uint32_t cbSegment; /* Size of the current segments in bytes. */ bool fUnaligned; /* Flag whether the current buffer is unaligned. */ uint32_t cbUnaligned; /* Size of the unaligned buffers. */ uint32_t cUnaligned; bool fDoMapping = false; uint32_t cbSGBuffers = 0; /* Total number of bytes reserved for this request. */ RTGCPHYS GCPhysAddrPRDTLUnalignedStart = NIL_RTGCPHYS; PAHCIPORTTASKSTATESGENTRY pSGInfoCurr = NULL; PAHCIPORTTASKSTATESGENTRY pSGInfoPrev = NULL; PRTSGSEG pSGEntryCurr = NULL; PRTSGSEG pSGEntryPrev = NULL; RTGCPHYS GCPhysBufferPageAlignedPrev = NIL_RTGCPHYS; uint8_t *pu8BufferUnalignedPos = NULL; uint32_t cbUnalignedComplete = 0; STAM_PROFILE_START(&pAhciPort->StatProfileMapIntoR3, a); pAhciPortTaskState->cbSGBuffers = 0; /* * Create a safe mapping when doing post processing because the size of the * data to transfer and the amount of guest memory reserved can differ */ if (pAhciPortTaskState->pfnPostProcess) { ahciLog(("%s: Request with post processing.\n", __FUNCTION__)); ahciScatterGatherListGetTotalBufferSize(pAhciPort, pAhciPortTaskState); return ahciScatterGatherListCreateSafe(pAhciPort, pAhciPortTaskState, fReadonly, 0); } /* * We need to calculate the number of SG list entries in R3 first because the data buffers in the guest don't need to be * page aligned. Hence the number of SG list entries in the guest can differ from the ones we need * because PDMDevHlpPhysGCPhys2CCPtr works only on a page base. * In the first pass we calculate the number of segments in R3 and in the second pass we map the guest segments into R3. */ for (int i = 0; i < 2; i++) { cSGLEntriesGCLeft = AHCI_CMDHDR_PRDTL_ENTRIES(pCmdHdr->u32DescInf); ahciLog(("%s: cSGEntriesGC=%u\n", __FUNCTION__, cSGLEntriesGCLeft)); /* Set start address of the entries. */ GCPhysAddrPRDTLEntryStart = AHCI_RTGCPHYS_FROM_U32(pCmdHdr->u32CmdTblAddrUp, pCmdHdr->u32CmdTblAddr) + AHCI_CMDHDR_PRDT_OFFSET; fUnaligned = false; cbUnaligned = 0; cUnaligned = 0; GCPhysBufferPageAlignedPrev = NIL_RTGCPHYS; if (fDoMapping) { ahciLog(("%s: cSGEntriesR3=%u\n", __FUNCTION__, cSGEntriesR3)); /* The number of needed SG entries in R3 is known. Allocate needed memory. */ rc = ahciScatterGatherListAllocate(pAhciPortTaskState, cSGEntriesR3, cbUnalignedComplete); AssertMsgRC(rc, ("Failed to allocate scatter gather array rc=%Rrc\n", rc)); /* We are now able to map the pages into R3. */ pSGInfoCurr = pAhciPortTaskState->paSGEntries; pSGEntryCurr = pAhciPortTaskState->pSGListHead; pSGEntryPrev = pSGEntryCurr; pSGInfoPrev = pSGInfoCurr; /* Initialize first segment to remove the need for additional if checks later in the code. */ pSGEntryCurr->pvSeg = NULL; pSGEntryCurr->cbSeg = 0; pSGInfoCurr->fGuestMemory= false; pu8BufferUnalignedPos = (uint8_t *)pAhciPortTaskState->pvBufferUnaligned; pAhciPortTaskState->cSGListUsed = 0; pAhciPortTaskState->cbSGBuffers = cbSGBuffers; } do { cSGLEntriesGCRead = (cSGLEntriesGCLeft < RT_ELEMENTS(aSGLEntry)) ? cSGLEntriesGCLeft : RT_ELEMENTS(aSGLEntry); cSGLEntriesGCLeft -= cSGLEntriesGCRead; /* Read the SG entries. */ PDMDevHlpPhysRead(pDevIns, GCPhysAddrPRDTLEntryStart, &aSGLEntry[0], cSGLEntriesGCRead * sizeof(SGLEntry)); for (cActualSGEntry = 0; cActualSGEntry < cSGLEntriesGCRead; cActualSGEntry++) { RTGCPHYS GCPhysAddrDataBase; uint32_t cbDataToTransfer; ahciLog(("%s: cActualSGEntry=%u cSGEntriesR3=%u\n", __FUNCTION__, cActualSGEntry, cSGEntriesR3)); cbDataToTransfer = (aSGLEntry[cActualSGEntry].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; ahciLog(("%s: cbDataToTransfer=%u\n", __FUNCTION__, cbDataToTransfer)); cbSGBuffers += cbDataToTransfer; /* Check if the buffer is sector aligned. */ if (cbDataToTransfer % 512 != 0) { if (!fUnaligned) { /* We are not in an unaligned buffer but this is the first unaligned one. */ fUnaligned = true; cbUnaligned = cbDataToTransfer; GCPhysAddrPRDTLUnalignedStart = GCPhysAddrPRDTLEntryStart + cActualSGEntry * sizeof(SGLEntry); cSGEntriesR3++; cUnaligned = 1; ahciLog(("%s: Unaligned buffer found cb=%d\n", __FUNCTION__, cbDataToTransfer)); } else { /* We are already in an unaligned buffer and this one is unaligned too. */ cbUnaligned += cbDataToTransfer; cUnaligned++; } cbUnalignedComplete += cbDataToTransfer; } else /* Guest segment size is sector aligned. */ { if (fUnaligned) { if (cbUnaligned % 512 == 0) { /* * The last buffer started at an offset * not aligned to a sector boundary but this buffer * is sector aligned. Check if the current size of all * unaligned segments is a multiple of a sector. * If that's the case we can now map the segments again into R3. */ fUnaligned = false; if (fDoMapping) { /* Set up the entry. */ pSGInfoCurr->fGuestMemory = false; pSGInfoCurr->u.temp.GCPhysAddrBaseFirstUnaligned = GCPhysAddrPRDTLUnalignedStart; pSGInfoCurr->u.temp.cUnaligned = cUnaligned; pSGInfoCurr->u.temp.pvBuf = pu8BufferUnalignedPos; pSGEntryCurr->pvSeg = pu8BufferUnalignedPos; pSGEntryCurr->cbSeg = cbUnaligned; pu8BufferUnalignedPos += cbUnaligned; /* * If the transfer is to the device we need to copy the content of the not mapped guest * segments into the temporary buffer. */ if (pAhciPortTaskState->enmTxDir == AHCITXDIR_WRITE) ahciCopyFromSGListIntoBuffer(pDevIns, pSGInfoCurr); /* Advance to next entry saving the pointers to the current ones. */ pSGEntryPrev = pSGEntryCurr; pSGInfoPrev = pSGInfoCurr; pSGInfoCurr++; pSGEntryCurr++; pAhciPortTaskState->cSGListUsed++; cSGEntriesProcessed++; } } else { cbUnaligned += cbDataToTransfer; cbUnalignedComplete += cbDataToTransfer; cUnaligned++; } } else { /* * The size of the guest segment is sector aligned but it is possible that the segment crosses * a page boundary in a way splitting the segment into parts which are not sector aligned. * We have to treat them like unaligned guest segments then. */ GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(aSGLEntry[cActualSGEntry].u32DBAUp, aSGLEntry[cActualSGEntry].u32DBA); ahciLog(("%s: GCPhysAddrDataBase=%RGp\n", __FUNCTION__, GCPhysAddrDataBase)); /* * Check if the physical address is page aligned. */ if (GCPhysAddrDataBase & PAGE_OFFSET_MASK) { RTGCPHYS GCPhysAddrDataNextPage = PHYS_PAGE_ADDRESS(GCPhysAddrDataBase) + PAGE_SIZE; /* Difference from the buffer start to the next page boundary. */ uint32_t u32GCPhysAddrDiff = GCPhysAddrDataNextPage - GCPhysAddrDataBase; if (u32GCPhysAddrDiff % 512 != 0) { if (!fUnaligned) { /* We are not in an unaligned buffer but this is the first unaligned one. */ fUnaligned = true; cbUnaligned = cbDataToTransfer; GCPhysAddrPRDTLUnalignedStart = GCPhysAddrPRDTLEntryStart + cActualSGEntry * sizeof(SGLEntry); cSGEntriesR3++; cUnaligned = 1; ahciLog(("%s: Guest segment is sector aligned but crosses a page boundary cb=%d\n", __FUNCTION__, cbDataToTransfer)); } else { /* We are already in an unaligned buffer and this one is unaligned too. */ cbUnaligned += cbDataToTransfer; cUnaligned++; } cbUnalignedComplete += cbDataToTransfer; } else { ahciLog(("%s: Align page: GCPhysAddrDataBase=%RGp GCPhysAddrDataNextPage=%RGp\n", __FUNCTION__, GCPhysAddrDataBase, GCPhysAddrDataNextPage)); RTGCPHYS GCPhysBufferPageAligned = PHYS_PAGE_ADDRESS(GCPhysAddrDataBase); /* Check if the mapping ends at the page boundary and set segment size accordingly. */ cbSegment = (cbDataToTransfer < u32GCPhysAddrDiff) ? cbDataToTransfer : u32GCPhysAddrDiff; /* Subtract size of the buffer in the actual page. */ cbDataToTransfer -= cbSegment; if (GCPhysBufferPageAlignedPrev != GCPhysBufferPageAligned) { /* We don't need to map the buffer if it is in the same page as the previous one. */ if (fDoMapping) { uint8_t *pbMapping; pSGInfoCurr->fGuestMemory = true; /* Create the mapping. */ if (fReadonly) rc = PDMDevHlpPhysGCPhys2CCPtrReadOnly(pDevIns, GCPhysBufferPageAligned, 0, (const void **)&pbMapping, &pSGInfoCurr->u.direct.PageLock); else rc = PDMDevHlpPhysGCPhys2CCPtr(pDevIns, GCPhysBufferPageAligned, 0, (void **)&pbMapping, &pSGInfoCurr->u.direct.PageLock); if (RT_FAILURE(rc)) { /* Mapping failed. Fall back to a bounce buffer. */ ahciLog(("%s: Mapping guest physical address %RGp failed with rc=%Rrc\n", __FUNCTION__, GCPhysBufferPageAligned, rc)); return ahciScatterGatherListCreateSafe(pAhciPort, pAhciPortTaskState, fReadonly, cSGEntriesProcessed); } if ((pbMapping + (GCPhysAddrDataBase - GCPhysBufferPageAligned) == ((uint8_t *)pSGEntryPrev->pvSeg + pSGEntryCurr->cbSeg))) { pSGEntryPrev->cbSeg += cbSegment; ahciLog(("%s: Merged mapping pbMapping=%#p into current segment pvSeg=%#p. New size is cbSeg=%d\n", __FUNCTION__, pbMapping, pSGEntryPrev->pvSeg, pSGEntryPrev->cbSeg)); } else { pSGEntryCurr->cbSeg = cbSegment; /* Let pvBuf point to the start of the buffer in the page. */ pSGEntryCurr->pvSeg = pbMapping + (GCPhysAddrDataBase - GCPhysBufferPageAligned); ahciLog(("%s: pvSegBegin=%#p pvSegEnd=%#p\n", __FUNCTION__, pSGEntryCurr->pvSeg, (uint8_t *)pSGEntryCurr->pvSeg + pSGEntryCurr->cbSeg)); pSGEntryPrev = pSGEntryCurr; pSGEntryCurr++; pAhciPortTaskState->cSGListUsed++; } pSGInfoPrev = pSGInfoCurr; pSGInfoCurr++; cSGEntriesProcessed++; } else cSGEntriesR3++; } else if (fDoMapping) { pSGEntryPrev->cbSeg += cbSegment; ahciLog(("%s: Buffer is already in previous mapping pvSeg=%#p. New size is cbSeg=%d\n", __FUNCTION__, pSGEntryPrev->pvSeg, pSGEntryPrev->cbSeg)); } /* Let physical address point to the next page in the buffer. */ GCPhysAddrDataBase = GCPhysAddrDataNextPage; GCPhysBufferPageAlignedPrev = GCPhysBufferPageAligned; } } if (!fUnaligned) { /* The address is now page aligned. */ while (cbDataToTransfer) { ahciLog(("%s: GCPhysAddrDataBase=%RGp cbDataToTransfer=%u cSGEntriesR3=%u\n", __FUNCTION__, GCPhysAddrDataBase, cbDataToTransfer, cSGEntriesR3)); /* Check if this is the last page the buffer is in. */ cbSegment = (cbDataToTransfer < PAGE_SIZE) ? cbDataToTransfer : PAGE_SIZE; cbDataToTransfer -= cbSegment; if (fDoMapping) { void *pvMapping; pSGInfoCurr->fGuestMemory = true; /* Create the mapping. */ if (fReadonly) rc = PDMDevHlpPhysGCPhys2CCPtrReadOnly(pDevIns, GCPhysAddrDataBase, 0, (const void **)&pvMapping, &pSGInfoCurr->u.direct.PageLock); else rc = PDMDevHlpPhysGCPhys2CCPtr(pDevIns, GCPhysAddrDataBase, 0, &pvMapping, &pSGInfoCurr->u.direct.PageLock); if (RT_FAILURE(rc)) { /* Mapping failed. Fall back to a bounce buffer. */ ahciLog(("%s: Mapping guest physical address %RGp failed with rc=%Rrc\n", __FUNCTION__, GCPhysAddrDataBase, rc)); return ahciScatterGatherListCreateSafe(pAhciPort, pAhciPortTaskState, fReadonly, cSGEntriesProcessed); } /* Check for adjacent mappings. */ if (pvMapping == ((uint8_t *)pSGEntryPrev->pvSeg + pSGEntryPrev->cbSeg) && (pSGInfoPrev->fGuestMemory == true)) { /* Yes they are adjacent. Just add the size of this mapping to the previous segment. */ pSGEntryPrev->cbSeg += cbSegment; ahciLog(("%s: Merged mapping pvMapping=%#p into current segment pvSeg=%#p. New size is cbSeg=%d\n", __FUNCTION__, pvMapping, pSGEntryPrev->pvSeg, pSGEntryPrev->cbSeg)); } else { /* No they are not. Use a new sg entry. */ pSGEntryCurr->cbSeg = cbSegment; pSGEntryCurr->pvSeg = pvMapping; ahciLog(("%s: pvSegBegin=%#p pvSegEnd=%#p\n", __FUNCTION__, pSGEntryCurr->pvSeg, (uint8_t *)pSGEntryCurr->pvSeg + pSGEntryCurr->cbSeg)); pSGEntryPrev = pSGEntryCurr; pSGEntryCurr++; pAhciPortTaskState->cSGListUsed++; } pSGInfoPrev = pSGInfoCurr; pSGInfoCurr++; cSGEntriesProcessed++; } else cSGEntriesR3++; GCPhysBufferPageAlignedPrev = GCPhysAddrDataBase; /* Go to the next page. */ GCPhysAddrDataBase += PAGE_SIZE; } } /* if (!fUnaligned) */ } /* if !fUnaligned */ } /* if guest segment is sector aligned. */ } /* for SGEntries read */ /* Set address to the next entries to read. */ GCPhysAddrPRDTLEntryStart += cSGLEntriesGCRead * sizeof(SGLEntry); } while (cSGLEntriesGCLeft); fDoMapping = true; } /* for passes */ /* Check if the last processed segment was unaligned. We need to add it now. */ if (fUnaligned) { /* Set up the entry. */ AssertMsg(!(cbUnaligned % 512), ("Buffer is not sector aligned\n")); pSGInfoCurr->fGuestMemory = false; pSGInfoCurr->u.temp.GCPhysAddrBaseFirstUnaligned = GCPhysAddrPRDTLUnalignedStart; pSGInfoCurr->u.temp.cUnaligned = cUnaligned; pSGInfoCurr->u.temp.pvBuf = pu8BufferUnalignedPos; pSGEntryCurr->pvSeg = pu8BufferUnalignedPos; pSGEntryCurr->cbSeg = cbUnaligned; pAhciPortTaskState->cSGListUsed++; /* * If the transfer is to the device we need to copy the content of the not mapped guest * segments into the temporary buffer. */ if (pAhciPortTaskState->enmTxDir == AHCITXDIR_WRITE) ahciCopyFromSGListIntoBuffer(pDevIns, pSGInfoCurr); } STAM_PROFILE_STOP(&pAhciPort->StatProfileMapIntoR3, a); return rc; } /** * Destroy a scatter gather list and free all occupied resources (mappings, etc.) * * @returns VBox status code. * @param pAhciPort The ahci port. * @param pAhciPortTaskState The task state which contains the S/G list entries. */ static int ahciScatterGatherListDestroy(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { PAHCIPORTTASKSTATESGENTRY pSGInfoCurr = pAhciPortTaskState->paSGEntries; PPDMDEVINS pDevIns = pAhciPort->CTX_SUFF(pDevIns); STAM_PROFILE_START(&pAhciPort->StatProfileDestroyScatterGatherList, a); if (pAhciPortTaskState->pfnPostProcess) { int rc; rc = pAhciPortTaskState->pfnPostProcess(pAhciPortTaskState); AssertRC(rc); pAhciPortTaskState->pfnPostProcess = NULL; /* Free the buffer holding the unprocessed data. They are not needed anymore. */ RTMemFree(pAhciPortTaskState->pSGListHead[0].pvSeg); } for (unsigned cActualSGEntry = 0; cActualSGEntry < pAhciPortTaskState->cSGEntries; cActualSGEntry++) { if (pSGInfoCurr->fGuestMemory) { /* Release the lock. */ PDMDevHlpPhysReleasePageMappingLock(pDevIns, &pSGInfoCurr->u.direct.PageLock); } else if (pAhciPortTaskState->enmTxDir == AHCITXDIR_READ) { /* Copy the data into the guest segments now. */ ahciCopyFromBufferIntoSGList(pDevIns, pSGInfoCurr); } /* Go to the next entry. */ pSGInfoCurr++; } /* Free allocated memory if the list was too big too many times. */ if (pAhciPortTaskState->cSGListTooBig >= AHCI_NR_OF_ALLOWED_BIGGER_LISTS) { RTMemFree(pAhciPortTaskState->pSGListHead); RTMemFree(pAhciPortTaskState->paSGEntries); if (pAhciPortTaskState->pvBufferUnaligned) RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); pAhciPortTaskState->cSGListSize = 0; pAhciPortTaskState->cSGListTooBig = 0; pAhciPortTaskState->pSGListHead = NULL; pAhciPortTaskState->paSGEntries = NULL; pAhciPortTaskState->pvBufferUnaligned = NULL; pAhciPortTaskState->cbBufferUnaligned = 0; } STAM_PROFILE_STOP(&pAhciPort->StatProfileDestroyScatterGatherList, a); return VINF_SUCCESS; } /** * Copy a temporary buffer into a part of the guest scatter gather list * described by the given descriptor entry. * * @returns nothing. * @param pDevIns Pointer to the device instance data. * @param pSGInfo Pointer to the segment info structure which describes the guest segments * to write to which are unaligned. */ static void ahciCopyFromBufferIntoSGList(PPDMDEVINS pDevIns, PAHCIPORTTASKSTATESGENTRY pSGInfo) { uint8_t *pu8Buf = (uint8_t *)pSGInfo->u.temp.pvBuf; SGLEntry aSGLEntries[5]; uint32_t cSGEntriesLeft = pSGInfo->u.temp.cUnaligned; RTGCPHYS GCPhysPRDTLStart = pSGInfo->u.temp.GCPhysAddrBaseFirstUnaligned; AssertMsg(!pSGInfo->fGuestMemory, ("This is not possible\n")); do { uint32_t cSGEntriesRead = (cSGEntriesLeft < RT_ELEMENTS(aSGLEntries)) ? cSGEntriesLeft : RT_ELEMENTS(aSGLEntries); PDMDevHlpPhysRead(pDevIns, GCPhysPRDTLStart, &aSGLEntries[0], cSGEntriesRead * sizeof(SGLEntry)); for (uint32_t i = 0; i < cSGEntriesRead; i++) { RTGCPHYS GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(aSGLEntries[i].u32DBAUp, aSGLEntries[i].u32DBA); uint32_t cbCopied = (aSGLEntries[i].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; /* Copy into SG entry. */ PDMDevHlpPhysWrite(pDevIns, GCPhysAddrDataBase, pu8Buf, cbCopied); pu8Buf += cbCopied; } GCPhysPRDTLStart += cSGEntriesRead * sizeof(SGLEntry); cSGEntriesLeft -= cSGEntriesRead; } while (cSGEntriesLeft); } /** * Copy a part of the guest scatter gather list into a temporary buffer. * * @returns nothing. * @param pDevIns Pointer to the device instance data. * @param pSGInfo Pointer to the segment info structure which describes the guest segments * to read from which are unaligned. */ static void ahciCopyFromSGListIntoBuffer(PPDMDEVINS pDevIns, PAHCIPORTTASKSTATESGENTRY pSGInfo) { uint8_t *pu8Buf = (uint8_t *)pSGInfo->u.temp.pvBuf; SGLEntry aSGLEntries[5]; uint32_t cSGEntriesLeft = pSGInfo->u.temp.cUnaligned; RTGCPHYS GCPhysPRDTLStart = pSGInfo->u.temp.GCPhysAddrBaseFirstUnaligned; AssertMsg(!pSGInfo->fGuestMemory, ("This is not possible\n")); do { uint32_t cSGEntriesRead = (cSGEntriesLeft < RT_ELEMENTS(aSGLEntries)) ? cSGEntriesLeft : RT_ELEMENTS(aSGLEntries); PDMDevHlpPhysRead(pDevIns, GCPhysPRDTLStart, &aSGLEntries[0], cSGEntriesRead * sizeof(SGLEntry)); for (uint32_t i = 0; i < cSGEntriesRead; i++) { RTGCPHYS GCPhysAddrDataBase = AHCI_RTGCPHYS_FROM_U32(aSGLEntries[i].u32DBAUp, aSGLEntries[i].u32DBA); uint32_t cbCopied = (aSGLEntries[i].u32DescInf & SGLENTRY_DESCINF_DBC) + 1; /* Copy into buffer. */ PDMDevHlpPhysRead(pDevIns, GCPhysAddrDataBase, pu8Buf, cbCopied); pu8Buf += cbCopied; } GCPhysPRDTLStart += cSGEntriesRead * sizeof(SGLEntry); cSGEntriesLeft -= cSGEntriesRead; } while (cSGEntriesLeft); } /** * Copy the content of a buffer to a scatter gather list. * * @returns Number of bytes transfered. * @param pAhciPortTaskState The task state which contains the S/G list entries. * @param pvBuf Pointer to the buffer which should be copied. * @param cbBuf Size of the buffer. */ static int ahciScatterGatherListCopyFromBuffer(PAHCIPORTTASKSTATE pAhciPortTaskState, void *pvBuf, size_t cbBuf) { unsigned cSGEntry = 0; int cbCopied = 0; PRTSGSEG pSGEntry = &pAhciPortTaskState->pSGListHead[cSGEntry]; uint8_t *pu8Buf = (uint8_t *)pvBuf; while (cSGEntry < pAhciPortTaskState->cSGEntries) { size_t cbToCopy = RT_MIN(cbBuf, pSGEntry->cbSeg); memcpy(pSGEntry->pvSeg, pu8Buf, cbToCopy); cbBuf -= cbToCopy; cbCopied += cbToCopy; /* We finished. */ if (!cbBuf) break; /* Advance the buffer. */ pu8Buf += cbToCopy; /* Go to the next entry in the list. */ pSGEntry++; cSGEntry++; } LogFlow(("%s: Copied %d bytes\n", __FUNCTION__, cbCopied)); return cbCopied; } /* -=-=-=-=- IBlockAsyncPort -=-=-=-=- */ /** Makes a PAHCIPort out of a PPDMIBLOCKASYNCPORT. */ #define PDMIBLOCKASYNCPORT_2_PAHCIPORT(pInterface) ( (PAHCIPort)((uintptr_t)pInterface - RT_OFFSETOF(AHCIPort, IPortAsync)) ) /** * Complete a data transfer task by freeing all occupied ressources * and notifying the guest. * * @returns VBox status code * * @param pAhciPort Pointer to the port where to request completed. * @param pAhciPortTaskState Pointer to the task which finished. * @param rcReq IPRT status code of the completed request. */ static int ahciTransferComplete(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, int rcReq) { /* Free system resources occupied by the scatter gather list. */ if (pAhciPortTaskState->enmTxDir != AHCITXDIR_FLUSH) ahciScatterGatherListDestroy(pAhciPort, pAhciPortTaskState); if (RT_FAILURE(rcReq)) { pAhciPortTaskState->cmdHdr.u32PRDBC = 0; pAhciPortTaskState->uATARegError = ID_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; /* Log the error. */ if (pAhciPort->cErrors++ < MAX_LOG_REL_ERRORS) { if (pAhciPortTaskState->enmTxDir == AHCITXDIR_FLUSH) LogRel(("AHCI#%u: Flush returned rc=%Rrc\n", pAhciPort->iLUN, rcReq)); else LogRel(("AHCI#%u: %s at offset %llu (%u bytes left) returned rc=%Rrc\n", pAhciPort->iLUN, pAhciPortTaskState->enmTxDir == AHCITXDIR_READ ? "Read" : "Write", pAhciPortTaskState->uOffset, pAhciPortTaskState->cbTransfer, rcReq)); } } else { pAhciPortTaskState->cmdHdr.u32PRDBC = pAhciPortTaskState->cbTransfer; pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } /* Write updated command header into memory of the guest. */ PDMDevHlpPhysWrite(pAhciPort->CTX_SUFF(pDevIns), pAhciPortTaskState->GCPhysCmdHdrAddr, &pAhciPortTaskState->cmdHdr, sizeof(CmdHdr)); if (pAhciPortTaskState->enmTxDir == AHCITXDIR_READ) { STAM_REL_COUNTER_ADD(&pAhciPort->StatBytesRead, pAhciPortTaskState->cbTransfer); pAhciPort->Led.Actual.s.fReading = 0; } else if (pAhciPortTaskState->enmTxDir == AHCITXDIR_WRITE) { STAM_REL_COUNTER_ADD(&pAhciPort->StatBytesWritten, pAhciPortTaskState->cbTransfer); pAhciPort->Led.Actual.s.fWriting = 0; } if (pAhciPortTaskState->fQueued) { uint32_t cOutstandingTasks; ahciLog(("%s: Before decrement uActTasksActive=%u\n", __FUNCTION__, pAhciPort->uActTasksActive)); cOutstandingTasks = ASMAtomicDecU32(&pAhciPort->uActTasksActive); ahciLog(("%s: After decrement uActTasksActive=%u\n", __FUNCTION__, cOutstandingTasks)); ASMAtomicOrU32(&pAhciPort->u32QueuedTasksFinished, (1 << pAhciPortTaskState->uTag)); #ifdef RT_STRICT bool fXchg = ASMAtomicCmpXchgBool(&pAhciPortTaskState->fActive, false, true); AssertMsg(fXchg, ("Task is not active\n")); #endif if (!cOutstandingTasks) ahciSendSDBFis(pAhciPort, 0, pAhciPortTaskState, true); } else { #ifdef RT_STRICT bool fXchg = ASMAtomicCmpXchgBool(&pAhciPortTaskState->fActive, false, true); AssertMsg(fXchg, ("Task is not active\n")); #endif ahciSendD2HFis(pAhciPort, pAhciPortTaskState, pAhciPortTaskState->cmdFis, true); } /* Add the task to the cache. */ pAhciPort->aCachedTasks[pAhciPortTaskState->uTag] = pAhciPortTaskState; return VINF_SUCCESS; } /** * Notification callback for a completed transfer. * * @returns VBox status code. * @param pInterface Pointer to the interface. * @param pvUser User data. * @param rcReq IPRT Status code of the completed request. */ static DECLCALLBACK(int) ahciTransferCompleteNotify(PPDMIBLOCKASYNCPORT pInterface, void *pvUser, int rcReq) { PAHCIPort pAhciPort = PDMIBLOCKASYNCPORT_2_PAHCIPORT(pInterface); PAHCIPORTTASKSTATE pAhciPortTaskState = (PAHCIPORTTASKSTATE)pvUser; ahciLog(("%s: pInterface=%p pvUser=%p uTag=%u\n", __FUNCTION__, pInterface, pvUser, pAhciPortTaskState->uTag)); int rc = ahciTransferComplete(pAhciPort, pAhciPortTaskState, rcReq); if (pAhciPort->uActTasksActive == 0 && pAhciPort->pAhciR3->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pAhciPort->pDevInsR3); return rc; } /** * Process an non read/write ATA command. * * @returns The direction of the data transfer * @param pCmdHdr Pointer to the command header. */ static AHCITXDIR ahciProcessCmd(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState, uint8_t *pCmdFis) { AHCITXDIR rc = AHCITXDIR_NONE; bool fLBA48 = false; CmdHdr *pCmdHdr = &pAhciPortTaskState->cmdHdr; AssertMsg(pCmdFis[AHCI_CMDFIS_TYPE] == AHCI_CMDFIS_TYPE_H2D, ("FIS is not a host to device Fis!!\n")); pAhciPortTaskState->cbTransfer = 0; switch (pCmdFis[AHCI_CMDFIS_CMD]) { case ATA_IDENTIFY_DEVICE: { if (pAhciPort->pDrvBlock && !pAhciPort->fATAPI) { int rc2; uint16_t u16Temp[256]; /* Fill the buffer. */ ahciIdentifySS(pAhciPort, u16Temp); /* Create scatter gather list. */ rc2 = ahciScatterGatherListCreate(pAhciPort, pAhciPortTaskState, false); if (RT_FAILURE(rc2)) AssertMsgFailed(("Creating list failed rc=%Rrc\n", rc2)); /* Copy the buffer. */ pCmdHdr->u32PRDBC = ahciScatterGatherListCopyFromBuffer(pAhciPortTaskState, &u16Temp[0], sizeof(u16Temp)); /* Destroy list. */ rc2 = ahciScatterGatherListDestroy(pAhciPort, pAhciPortTaskState); if (RT_FAILURE(rc2)) AssertMsgFailed(("Freeing list failed rc=%Rrc\n", rc2)); pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; /* Write updated command header into memory of the guest. */ PDMDevHlpPhysWrite(pAhciPort->CTX_SUFF(pDevIns), pAhciPortTaskState->GCPhysCmdHdrAddr, pCmdHdr, sizeof(CmdHdr)); } else { pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } break; } case ATA_READ_NATIVE_MAX_ADDRESS_EXT: case ATA_READ_NATIVE_MAX_ADDRESS: break; case ATA_SET_FEATURES: { switch (pCmdFis[AHCI_CMDFIS_FET]) { case 0x02: /* write cache enable */ case 0xaa: /* read look-ahead enable */ case 0x55: /* read look-ahead disable */ case 0xcc: /* reverting to power-on defaults enable */ case 0x66: /* reverting to power-on defaults disable */ pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; break; case 0x82: /* write cache disable */ rc = AHCITXDIR_FLUSH; break; case 0x03: { /* set transfer mode */ Log2(("%s: transfer mode %#04x\n", __FUNCTION__, pCmdFis[AHCI_CMDFIS_SECTC])); switch (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) { case 0x00: /* PIO default */ case 0x08: /* PIO mode */ break; case ATA_MODE_MDMA: /* MDMA mode */ pAhciPort->uATATransferMode = (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) | RT_MIN(pCmdFis[AHCI_CMDFIS_SECTC] & 0x07, ATA_MDMA_MODE_MAX); break; case ATA_MODE_UDMA: /* UDMA mode */ pAhciPort->uATATransferMode = (pCmdFis[AHCI_CMDFIS_SECTC] & 0xf8) | RT_MIN(pCmdFis[AHCI_CMDFIS_SECTC] & 0x07, ATA_UDMA_MODE_MAX); break; } break; } default: pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } break; } case ATA_FLUSH_CACHE_EXT: case ATA_FLUSH_CACHE: rc = AHCITXDIR_FLUSH; break; case ATA_PACKET: if (!pAhciPort->fATAPI) { pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } else { int rc2 = atapiParseCmdVirtualATAPI(pAhciPort, pAhciPortTaskState); } break; case ATA_IDENTIFY_PACKET_DEVICE: if (!pAhciPort->fATAPI) { pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } else { atapiDoTransfer(pAhciPort, pAhciPortTaskState, ATAFN_SS_ATAPI_IDENTIFY); pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } break; case ATA_SET_MULTIPLE_MODE: if ( pCmdFis[AHCI_CMDFIS_SECTC] != 0 && ( pCmdFis[AHCI_CMDFIS_SECTC] > ATA_MAX_MULT_SECTORS || (pCmdFis[AHCI_CMDFIS_SECTC] & (pCmdFis[AHCI_CMDFIS_SECTC] - 1)) != 0)) { pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } else { Log2(("%s: set multi sector count to %d\n", __FUNCTION__, pCmdFis[AHCI_CMDFIS_SECTC])); pAhciPort->cMultSectors = pCmdFis[AHCI_CMDFIS_SECTC]; pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } break; case ATA_STANDBY_IMMEDIATE: break; /* Do nothing. */ case ATA_CHECK_POWER_MODE: pAhciPortTaskState->cmdFis[AHCI_CMDFIS_SECTC] = 0xff; /* drive active or idle */ /* fall through */ case ATA_INITIALIZE_DEVICE_PARAMETERS: case ATA_IDLE_IMMEDIATE: case ATA_RECALIBRATE: case ATA_NOP: case ATA_READ_VERIFY_SECTORS_EXT: case ATA_READ_VERIFY_SECTORS: case ATA_READ_VERIFY_SECTORS_WITHOUT_RETRIES: case ATA_SLEEP: pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; break; case ATA_READ_DMA_EXT: fLBA48 = true; case ATA_READ_DMA: { pAhciPortTaskState->cbTransfer = ahciGetNSectors(pCmdFis, fLBA48) * 512; pAhciPortTaskState->uOffset = ahciGetSector(pAhciPort, pCmdFis, fLBA48) * 512; rc = AHCITXDIR_READ; break; } case ATA_WRITE_DMA_EXT: fLBA48 = true; case ATA_WRITE_DMA: { pAhciPortTaskState->cbTransfer = ahciGetNSectors(pCmdFis, fLBA48) * 512; pAhciPortTaskState->uOffset = ahciGetSector(pAhciPort, pCmdFis, fLBA48) * 512; rc = AHCITXDIR_WRITE; break; } case ATA_READ_FPDMA_QUEUED: { pAhciPortTaskState->cbTransfer = ahciGetNSectorsQueued(pCmdFis) * 512; pAhciPortTaskState->uOffset = ahciGetSectorQueued(pCmdFis) * 512; rc = AHCITXDIR_READ; break; } case ATA_WRITE_FPDMA_QUEUED: { pAhciPortTaskState->cbTransfer = ahciGetNSectorsQueued(pCmdFis) * 512; pAhciPortTaskState->uOffset = ahciGetSectorQueued(pCmdFis) * 512; rc = AHCITXDIR_WRITE; break; } /* All not implemented commands go below. */ case ATA_SECURITY_FREEZE_LOCK: case ATA_SMART: case ATA_NV_CACHE: case ATA_READ_LOG_EXT: pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; break; default: /* For debugging purposes. */ AssertMsgFailed(("Unknown command issued\n")); pAhciPortTaskState->uATARegError = ABRT_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } return rc; } /** * Retrieve a command FIS from guest memory. * * @returns nothing * @param pAhciPortTaskState The state of the actual task. */ static void ahciPortTaskGetCommandFis(PAHCIPort pAhciPort, PAHCIPORTTASKSTATE pAhciPortTaskState) { RTGCPHYS GCPhysAddrCmdTbl; AssertMsg(pAhciPort->GCPhysAddrClb && pAhciPort->GCPhysAddrFb, ("%s: GCPhysAddrClb and/or GCPhysAddrFb are 0\n", __FUNCTION__)); /* * First we are reading the command header pointed to by regCLB. * From this we get the address of the command table which we are reading too. * We can process the Command FIS afterwards. */ pAhciPortTaskState->GCPhysCmdHdrAddr = pAhciPort->GCPhysAddrClb + pAhciPortTaskState->uTag * sizeof(CmdHdr); LogFlow(("%s: PDMDevHlpPhysRead GCPhysAddrCmdLst=%RGp cbCmdHdr=%u\n", __FUNCTION__, pAhciPortTaskState->GCPhysCmdHdrAddr, sizeof(CmdHdr))); PDMDevHlpPhysRead(pAhciPort->CTX_SUFF(pDevIns), pAhciPortTaskState->GCPhysCmdHdrAddr, &pAhciPortTaskState->cmdHdr, sizeof(CmdHdr)); #ifdef DEBUG /* Print some infos about the command header. */ ahciDumpCmdHdrInfo(pAhciPort, &pAhciPortTaskState->cmdHdr); #endif GCPhysAddrCmdTbl = AHCI_RTGCPHYS_FROM_U32(pAhciPortTaskState->cmdHdr.u32CmdTblAddrUp, pAhciPortTaskState->cmdHdr.u32CmdTblAddr); AssertMsg((pAhciPortTaskState->cmdHdr.u32DescInf & AHCI_CMDHDR_CFL_MASK) * sizeof(uint32_t) == AHCI_CMDFIS_TYPE_H2D_SIZE, ("This is not a command FIS!!\n")); /* Read the command Fis. */ LogFlow(("%s: PDMDevHlpPhysRead GCPhysAddrCmdTbl=%RGp cbCmdFis=%u\n", __FUNCTION__, GCPhysAddrCmdTbl, AHCI_CMDFIS_TYPE_H2D_SIZE)); PDMDevHlpPhysRead(pAhciPort->CTX_SUFF(pDevIns), GCPhysAddrCmdTbl, &pAhciPortTaskState->cmdFis[0], AHCI_CMDFIS_TYPE_H2D_SIZE); /* Set transfer direction. */ pAhciPortTaskState->enmTxDir = (pAhciPortTaskState->cmdHdr.u32DescInf & AHCI_CMDHDR_W) ? AHCITXDIR_WRITE : AHCITXDIR_READ; /* If this is an ATAPI command read the atapi command. */ if (pAhciPortTaskState->cmdHdr.u32DescInf & AHCI_CMDHDR_A) { GCPhysAddrCmdTbl += AHCI_CMDHDR_ACMD_OFFSET; PDMDevHlpPhysRead(pAhciPort->CTX_SUFF(pDevIns), GCPhysAddrCmdTbl, &pAhciPortTaskState->aATAPICmd[0], ATAPI_PACKET_SIZE); } /* We "received" the FIS. Clear the BSY bit in regTFD. */ if ((pAhciPortTaskState->cmdHdr.u32DescInf & AHCI_CMDHDR_C) && (pAhciPortTaskState->fQueued)) { /* * We need to send a FIS which clears the busy bit if this is a queued command so that the guest can queue other commands. * but this FIS does not assert an interrupt */ ahciSendD2HFis(pAhciPort, pAhciPortTaskState, pAhciPortTaskState->cmdFis, false); pAhciPort->regTFD &= ~AHCI_PORT_TFD_BSY; } #ifdef DEBUG /* Print some infos about the FIS. */ ahciDumpFisInfo(pAhciPort, &pAhciPortTaskState->cmdFis[0]); /* Print the PRDT */ RTGCPHYS GCPhysAddrPRDTLEntryStart = AHCI_RTGCPHYS_FROM_U32(pAhciPortTaskState->cmdHdr.u32CmdTblAddrUp, pAhciPortTaskState->cmdHdr.u32CmdTblAddr) + AHCI_CMDHDR_PRDT_OFFSET; ahciLog(("PRDT address %RGp number of entries %u\n", GCPhysAddrPRDTLEntryStart, AHCI_CMDHDR_PRDTL_ENTRIES(pAhciPortTaskState->cmdHdr.u32DescInf))); for (unsigned i = 0; i < AHCI_CMDHDR_PRDTL_ENTRIES(pAhciPortTaskState->cmdHdr.u32DescInf); i++) { SGLEntry SGEntry; ahciLog(("Entry %u at address %RGp\n", i, GCPhysAddrPRDTLEntryStart)); PDMDevHlpPhysRead(pAhciPort->CTX_SUFF(pDevIns), GCPhysAddrPRDTLEntryStart, &SGEntry, sizeof(SGLEntry)); RTGCPHYS GCPhysDataAddr = AHCI_RTGCPHYS_FROM_U32(SGEntry.u32DBAUp, SGEntry.u32DBA); ahciLog(("GCPhysAddr=%RGp Size=%u\n", GCPhysDataAddr, SGEntry.u32DescInf & SGLENTRY_DESCINF_DBC)); GCPhysAddrPRDTLEntryStart += sizeof(SGLEntry); } #endif } /** * Transmit queue consumer * Queue a new async task. * * @returns Success indicator. * If false the item will not be removed and the flushing will stop. * @param pDevIns The device instance. * @param pItem The item to consume. Upon return this item will be freed. */ static DECLCALLBACK(bool) ahciNotifyQueueConsumer(PPDMDEVINS pDevIns, PPDMQUEUEITEMCORE pItem) { PDEVPORTNOTIFIERQUEUEITEM pNotifierItem = (PDEVPORTNOTIFIERQUEUEITEM)pItem; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIPort pAhciPort = &pAhci->ahciPort[pNotifierItem->iPort]; int rc = VINF_SUCCESS; if (!pAhciPort->fAsyncInterface) { ahciLog(("%s: Got notification from GC\n", __FUNCTION__)); /* Notify the async IO thread. */ rc = RTSemEventSignal(pAhciPort->AsyncIORequestSem); AssertRC(rc); } else { AHCITXDIR enmTxDir; PAHCIPORTTASKSTATE pAhciPortTaskState; ahciLog(("%s: Processing command at slot %d\n", __FUNCTION__, pNotifierItem->iTask)); /* * Check if there is already an allocated task struct in the cache. * Allocate a new task otherwise. */ if (!pAhciPort->aCachedTasks[pNotifierItem->iTask]) { pAhciPortTaskState = (PAHCIPORTTASKSTATE)RTMemAllocZ(sizeof(AHCIPORTTASKSTATE)); AssertMsg(pAhciPortTaskState, ("%s: Cannot allocate task state memory!\n")); } else { pAhciPortTaskState = pAhciPort->aCachedTasks[pNotifierItem->iTask]; } #ifdef RT_STRICT bool fXchg = ASMAtomicCmpXchgBool(&pAhciPortTaskState->fActive, true, false); AssertMsg(fXchg, ("Task is already active\n")); #endif /** Set current command slot */ pAhciPortTaskState->uTag = pNotifierItem->iTask; pAhciPort->regCMD |= (AHCI_PORT_CMD_CCS_SHIFT(pAhciPortTaskState->uTag)); ahciPortTaskGetCommandFis(pAhciPort, pAhciPortTaskState); /* Mark the task as processed by the HBA if this is a queued task so that it doesn't occur in the CI register anymore. */ if (pNotifierItem->fQueued) { pAhciPortTaskState->fQueued = true; ASMAtomicOrU32(&pAhciPort->u32TasksFinished, (1 << pAhciPortTaskState->uTag)); } else pAhciPortTaskState->fQueued = false; if (!(pAhciPortTaskState->cmdFis[AHCI_CMDFIS_BITS] & AHCI_CMDFIS_C)) { /* If the reset bit is set put the device into reset state. */ if (pAhciPortTaskState->cmdFis[AHCI_CMDFIS_CTL] & AHCI_CMDFIS_CTL_SRST) { ahciLog(("%s: Setting device into reset state\n", __FUNCTION__)); pAhciPort->fResetDevice = true; ahciSendD2HFis(pAhciPort, pAhciPortTaskState, pAhciPortTaskState->cmdFis, true); pAhciPort->aCachedTasks[pNotifierItem->iTask] = pAhciPortTaskState; return true; } else if (pAhciPort->fResetDevice) /* The bit is not set and we are in a reset state. */ { ahciFinishStorageDeviceReset(pAhciPort, pAhciPortTaskState); pAhciPort->aCachedTasks[pNotifierItem->iTask] = pAhciPortTaskState; return true; } else /* We are not in a reset state update the control registers. */ { AssertMsgFailed(("%s: Update the control register\n", __FUNCTION__)); } } enmTxDir = ahciProcessCmd(pAhciPort, pAhciPortTaskState, pAhciPortTaskState->cmdFis); if (enmTxDir != AHCITXDIR_NONE) { pAhciPortTaskState->enmTxDir = enmTxDir; if (pAhciPortTaskState->fQueued) { ahciLog(("%s: Before increment uActTasksActive=%u\n", __FUNCTION__, pAhciPort->uActTasksActive)); ASMAtomicIncU32(&pAhciPort->uActTasksActive); ahciLog(("%s: After increment uActTasksActive=%u\n", __FUNCTION__, pAhciPort->uActTasksActive)); } if (enmTxDir != AHCITXDIR_FLUSH) { STAM_REL_COUNTER_INC(&pAhciPort->StatDMA); rc = ahciScatterGatherListCreate(pAhciPort, pAhciPortTaskState, (enmTxDir == AHCITXDIR_READ) ? false : true); if (RT_FAILURE(rc)) AssertMsgFailed(("%s: Failed to process command %Rrc\n", __FUNCTION__, rc)); } if (enmTxDir == AHCITXDIR_FLUSH) { rc = pAhciPort->pDrvBlockAsync->pfnStartFlush(pAhciPort->pDrvBlockAsync, pAhciPortTaskState); } else if (enmTxDir == AHCITXDIR_READ) { pAhciPort->Led.Asserted.s.fReading = pAhciPort->Led.Actual.s.fReading = 1; rc = pAhciPort->pDrvBlockAsync->pfnStartRead(pAhciPort->pDrvBlockAsync, pAhciPortTaskState->uOffset, pAhciPortTaskState->pSGListHead, pAhciPortTaskState->cSGListUsed, pAhciPortTaskState->cbTransfer, pAhciPortTaskState); } else { pAhciPort->Led.Asserted.s.fWriting = pAhciPort->Led.Actual.s.fWriting = 1; rc = pAhciPort->pDrvBlockAsync->pfnStartWrite(pAhciPort->pDrvBlockAsync, pAhciPortTaskState->uOffset, pAhciPortTaskState->pSGListHead, pAhciPortTaskState->cSGListUsed, pAhciPortTaskState->cbTransfer, pAhciPortTaskState); } if (rc == VINF_VD_ASYNC_IO_FINISHED) rc = ahciTransferComplete(pAhciPort, pAhciPortTaskState, VINF_SUCCESS); if (RT_FAILURE(rc) && rc != VERR_VD_ASYNC_IO_IN_PROGRESS) rc = ahciTransferComplete(pAhciPort, pAhciPortTaskState, rc); } else { #ifdef RT_STRICT bool fXchg = ASMAtomicCmpXchgBool(&pAhciPortTaskState->fActive, false, true); AssertMsg(fXchg, ("Task is not active\n")); #endif /* There is nothing left to do. Notify the guest. */ ahciSendD2HFis(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0], true); /* Add the task to the cache. */ pAhciPort->aCachedTasks[pAhciPortTaskState->uTag] = pAhciPortTaskState; } } return true; } /* The async IO thread for one port. */ static DECLCALLBACK(int) ahciAsyncIOLoop(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { PAHCIPort pAhciPort = (PAHCIPort)pThread->pvUser; PAHCI pAhci = pAhciPort->CTX_SUFF(pAhci); PAHCIPORTTASKSTATE pAhciPortTaskState; int rc = VINF_SUCCESS; uint64_t u64StartTime = 0; uint64_t u64StopTime = 0; uint32_t uIORequestsProcessed = 0; uint32_t uIOsPerSec = 0; ahciLog(("%s: Port %d entering async IO loop.\n", __FUNCTION__, pAhciPort->iLUN)); if (pThread->enmState == PDMTHREADSTATE_INITIALIZING) return VINF_SUCCESS; /* We use only one task structure. */ pAhciPortTaskState = (PAHCIPORTTASKSTATE)RTMemAllocZ(sizeof(AHCIPORTTASKSTATE)); if (!pAhciPortTaskState) { AssertMsgFailed(("Failed to allocate task state memory\n")); return VERR_NO_MEMORY; } while(pThread->enmState == PDMTHREADSTATE_RUNNING) { uint32_t uQueuedTasksFinished = 0; /* New run to get number of I/O requests per second?. */ if (!u64StartTime) u64StartTime = RTTimeMilliTS(); ASMAtomicXchgBool(&pAhciPort->fAsyncIOThreadIdle, true); if (pAhci->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pAhciPort->pDevInsR3); rc = RTSemEventWait(pAhciPort->AsyncIORequestSem, 1000); if (rc == VERR_TIMEOUT) { /* No I/O requests inbetween. Reset statistics and wait again. */ pAhciPort->StatIORequestsPerSecond.c = 0; rc = RTSemEventWait(pAhciPort->AsyncIORequestSem, RT_INDEFINITE_WAIT); } if (RT_FAILURE(rc) || (pThread->enmState != PDMTHREADSTATE_RUNNING)) break; AssertMsg(pAhciPort->pDrvBase, ("I/O thread without attached device?!\n")); ASMAtomicXchgBool(&pAhciPort->fAsyncIOThreadIdle, false); /* * To maximize the throughput of the controller we try to minimize the * number of world switches during interrupts by grouping as many * I/O requests together as possible. * On the other side we want to get minimal latency if the I/O load is low. * Thatswhy the number of I/O requests per second is measured and if it is over * a threshold the thread waits for other requests from the guest. */ if (uIOsPerSec >= pAhci->cHighIOThreshold) { uint8_t uActWritePosPrev = pAhciPort->uActWritePos; Log(("%s: Waiting for more tasks to get queued\n", __FUNCTION__)); do { /* Sleep some time. */ RTThreadSleep(pAhci->cMillisToSleep); /* Check if we got some new requests inbetween. */ if (uActWritePosPrev != pAhciPort->uActWritePos) { uActWritePosPrev = pAhciPort->uActWritePos; /* * Check if the queue is full. If that is the case * there is no point waiting another round. */ if ( ( (pAhciPort->uActReadPos < uActWritePosPrev) && (uActWritePosPrev - pAhciPort->uActReadPos) == AHCI_NR_COMMAND_SLOTS) || ( (pAhciPort->uActReadPos > uActWritePosPrev) && (RT_ELEMENTS(pAhciPort->ahciIOTasks) - pAhciPort->uActReadPos + uActWritePosPrev) == AHCI_NR_COMMAND_SLOTS) ) { Log(("%s: Queue full -> leaving\n", __FUNCTION__)); break; } Log(("%s: Another round\n", __FUNCTION__)); } else /* No change break out of the loop. */ { #ifdef DEBUG uint8_t uQueuedTasks; if (pAhciPort->uActReadPos < uActWritePosPrev) uQueuedTasks = uActWritePosPrev - pAhciPort->uActReadPos; else uQueuedTasks = RT_ELEMENTS(pAhciPort->ahciIOTasks) - pAhciPort->uActReadPos + uActWritePosPrev; Log(("%s: %u Tasks are queued\n", __FUNCTION__, uQueuedTasks)); #endif break; } } while (true); } ASMAtomicXchgBool(&pAhciPort->fNotificationSend, false); uint32_t cTasksToProcess = ASMAtomicXchgU32(&pAhciPort->uActTasksActive, 0); ahciLog(("%s: Processing %u requests\n", __FUNCTION__, cTasksToProcess)); /* Process commands. */ while ( (cTasksToProcess > 0) && RT_LIKELY(!pAhciPort->fPortReset)) { AHCITXDIR enmTxDir; uint8_t uActTag; STAM_PROFILE_START(&pAhciPort->StatProfileProcessTime, a); ahciLog(("%s: uActWritePos=%u\n", __FUNCTION__, pAhciPort->uActWritePos)); ahciLog(("%s: Before uActReadPos=%u\n", __FUNCTION__, pAhciPort->uActReadPos)); pAhciPortTaskState->uATARegStatus = 0; pAhciPortTaskState->uATARegError = 0; uActTag = pAhciPort->ahciIOTasks[pAhciPort->uActReadPos]; pAhciPortTaskState->uTag = AHCI_TASK_GET_TAG(uActTag); AssertMsg(pAhciPortTaskState->uTag < AHCI_NR_COMMAND_SLOTS, ("%s: Invalid Tag number!!\n", __FUNCTION__)); /** Set current command slot */ pAhciPort->regCMD |= (AHCI_PORT_CMD_CCS_SHIFT(pAhciPortTaskState->uTag)); /* Mark the task as processed by the HBA if this is a queued task so that it doesn't occur in the CI register anymore. */ if (AHCI_TASK_IS_QUEUED(uActTag)) { pAhciPortTaskState->fQueued = true; ASMAtomicOrU32(&pAhciPort->u32TasksFinished, (1 << pAhciPortTaskState->uTag)); } else { pAhciPortTaskState->fQueued = false; } ahciPortTaskGetCommandFis(pAhciPort, pAhciPortTaskState); ahciLog(("%s: Got command at slot %d\n", __FUNCTION__, pAhciPortTaskState->uTag)); if (!(pAhciPortTaskState->cmdFis[AHCI_CMDFIS_BITS] & AHCI_CMDFIS_C)) { /* If the reset bit is set put the device into reset state. */ if (pAhciPortTaskState->cmdFis[AHCI_CMDFIS_CTL] & AHCI_CMDFIS_CTL_SRST) { ahciLog(("%s: Setting device into reset state\n", __FUNCTION__)); pAhciPort->fResetDevice = true; ahciSendD2HFis(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0], true); } else if (pAhciPort->fResetDevice) /* The bit is not set and we are in a reset state. */ { ahciFinishStorageDeviceReset(pAhciPort, pAhciPortTaskState); } /* TODO: We are not in a reset state update the control registers. */ } else { enmTxDir = ahciProcessCmd(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0]); if (enmTxDir == AHCITXDIR_FLUSH) { rc = pAhciPort->pDrvBlock->pfnFlush(pAhciPort->pDrvBlock); /* Log the error. */ if ( RT_FAILURE(rc) && pAhciPort->cErrors++ < MAX_LOG_REL_ERRORS) { LogRel(("AHCI#%u: Flush returned rc=%Rrc\n", pAhciPort->iLUN, rc)); } if (RT_FAILURE(rc)) { pAhciPortTaskState->uATARegError = ID_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } else { pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } if (pAhciPortTaskState->fQueued) uQueuedTasksFinished |= (1 << pAhciPortTaskState->uTag); else { /* Task is not queued send D2H FIS */ ahciSendD2HFis(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0], true); } } else if (enmTxDir != AHCITXDIR_NONE) { uint64_t uOffset; size_t cbTransfer; PRTSGSEG pSegCurr; PAHCIPORTTASKSTATESGENTRY pSGInfoCurr; rc = ahciScatterGatherListCreate(pAhciPort, pAhciPortTaskState, (enmTxDir == AHCITXDIR_READ) ? false : true); if (RT_FAILURE(rc)) AssertMsgFailed(("%s: Failed to get number of list elments %Rrc\n", __FUNCTION__, rc)); STAM_REL_COUNTER_INC(&pAhciPort->StatDMA); /* Initialize all values. */ uOffset = pAhciPortTaskState->uOffset; cbTransfer = pAhciPortTaskState->cbTransfer; pSegCurr = &pAhciPortTaskState->pSGListHead[0]; pSGInfoCurr = pAhciPortTaskState->paSGEntries; STAM_PROFILE_START(&pAhciPort->StatProfileReadWrite, b); while (cbTransfer) { size_t cbProcess = (cbTransfer < pSegCurr->cbSeg) ? cbTransfer : pSegCurr->cbSeg; AssertMsg(!(pSegCurr->cbSeg % 512), ("Buffer is not sector aligned cbSeg=%d\n", pSegCurr->cbSeg)); AssertMsg(!(uOffset % 512), ("Offset is not sector aligned %llu\n", uOffset)); AssertMsg(!(cbProcess % 512), ("Number of bytes to process is not sector aligned %lu\n", cbProcess)); if (enmTxDir == AHCITXDIR_READ) { pAhciPort->Led.Asserted.s.fReading = pAhciPort->Led.Actual.s.fReading = 1; rc = pAhciPort->pDrvBlock->pfnRead(pAhciPort->pDrvBlock, uOffset, pSegCurr->pvSeg, cbProcess); pAhciPort->Led.Actual.s.fReading = 0; if (RT_FAILURE(rc)) break; STAM_REL_COUNTER_ADD(&pAhciPort->StatBytesRead, cbProcess); } else { pAhciPort->Led.Asserted.s.fWriting = pAhciPort->Led.Actual.s.fWriting = 1; rc = pAhciPort->pDrvBlock->pfnWrite(pAhciPort->pDrvBlock, uOffset, pSegCurr->pvSeg, cbProcess); pAhciPort->Led.Actual.s.fWriting = 0; if (RT_FAILURE(rc)) break; STAM_REL_COUNTER_ADD(&pAhciPort->StatBytesWritten, cbProcess); } /* Go to the next entry. */ uOffset += cbProcess; cbTransfer -= cbProcess; pSegCurr++; pSGInfoCurr++; } STAM_PROFILE_STOP(&pAhciPort->StatProfileReadWrite, b); /* Log the error. */ if ( RT_FAILURE(rc) && pAhciPort->cErrors++ < MAX_LOG_REL_ERRORS) { LogRel(("AHCI#%u: %s at offset %llu (%u bytes left) returned rc=%Rrc\n", pAhciPort->iLUN, enmTxDir == AHCITXDIR_READ ? "Read" : "Write", uOffset, cbTransfer, rc)); } /* Cleanup. */ int rc2 = ahciScatterGatherListDestroy(pAhciPort, pAhciPortTaskState); if (RT_FAILURE(rc2)) AssertMsgFailed(("Destroying task list failed rc=%Rrc\n", rc)); if (RT_LIKELY(!pAhciPort->fPortReset)) { pAhciPortTaskState->cmdHdr.u32PRDBC = pAhciPortTaskState->cbTransfer - cbTransfer; if (RT_FAILURE(rc)) { pAhciPortTaskState->uATARegError = ID_ERR; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_ERR; } else { pAhciPortTaskState->uATARegError = 0; pAhciPortTaskState->uATARegStatus = ATA_STAT_READY | ATA_STAT_SEEK; } /* Write updated command header into memory of the guest. */ PDMDevHlpPhysWrite(pAhciPort->CTX_SUFF(pDevIns), pAhciPortTaskState->GCPhysCmdHdrAddr, &pAhciPortTaskState->cmdHdr, sizeof(CmdHdr)); if (pAhciPortTaskState->fQueued) uQueuedTasksFinished |= (1 << pAhciPortTaskState->uTag); else { /* Task is not queued send D2H FIS */ ahciSendD2HFis(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0], true); } uIORequestsProcessed++; } } else { /* Nothing left to do. Notify the guest. */ ahciSendD2HFis(pAhciPort, pAhciPortTaskState, &pAhciPortTaskState->cmdFis[0], true); } STAM_PROFILE_STOP(&pAhciPort->StatProfileProcessTime, a); } #ifdef DEBUG /* Be paranoid. */ memset(&pAhciPortTaskState->cmdHdr, 0, sizeof(CmdHdr)); memset(&pAhciPortTaskState->cmdFis, 0, AHCI_CMDFIS_TYPE_H2D_SIZE); pAhciPortTaskState->GCPhysCmdHdrAddr = 0; pAhciPortTaskState->uOffset = 0; pAhciPortTaskState->cbTransfer = 0; /* Make the port number invalid making it easier to track down bugs. */ pAhciPort->ahciIOTasks[pAhciPort->uActReadPos] = 0xff; #endif pAhciPort->uActReadPos++; pAhciPort->uActReadPos %= RT_ELEMENTS(pAhciPort->ahciIOTasks); ahciLog(("%s: After uActReadPos=%u\n", __FUNCTION__, pAhciPort->uActReadPos)); cTasksToProcess--; /* If we encountered an error notify the guest and continue with the next task. */ if (RT_FAILURE(rc)) { if (uQueuedTasksFinished && RT_LIKELY(!pAhciPort->fPortReset)) ahciSendSDBFis(pAhciPort, uQueuedTasksFinished, pAhciPortTaskState, true); uQueuedTasksFinished = 0; } else if (!cTasksToProcess) cTasksToProcess = ASMAtomicXchgU32(&pAhciPort->uActTasksActive, 0); } if (uQueuedTasksFinished && RT_LIKELY(!pAhciPort->fPortReset)) ahciSendSDBFis(pAhciPort, uQueuedTasksFinished, pAhciPortTaskState, true); uQueuedTasksFinished = 0; u64StopTime = RTTimeMilliTS(); /* Check if one second has passed. */ if (u64StopTime - u64StartTime >= 1000) { /* Calculate number of I/O requests per second. */ uIOsPerSec = uIORequestsProcessed / ((u64StopTime - u64StartTime) / 1000); ahciLog(("%s: Processed %u requests in %llu ms -> %u requests/s\n", __FUNCTION__, uIORequestsProcessed, u64StopTime - u64StartTime, uIOsPerSec)); u64StartTime = 0; uIORequestsProcessed = 0; /* For the release statistics. There is no macro to set the counter to a specific value. */ pAhciPort->StatIORequestsPerSecond.c = uIOsPerSec; } } /* While running */ if (pAhci->fSignalIdle) PDMDevHlpAsyncNotificationCompleted(pAhciPort->pDevInsR3); /* Free task state memory */ if (pAhciPortTaskState->pSGListHead) RTMemFree(pAhciPortTaskState->pSGListHead); if (pAhciPortTaskState->paSGEntries) RTMemFree(pAhciPortTaskState->paSGEntries); if (pAhciPortTaskState->pvBufferUnaligned) RTMemPageFree(pAhciPortTaskState->pvBufferUnaligned, pAhciPortTaskState->cbBufferUnaligned); RTMemFree(pAhciPortTaskState); ahciLog(("%s: Port %d async IO thread exiting rc=%Rrc\n", __FUNCTION__, pAhciPort->iLUN, rc)); return rc; } /** * Unblock the async I/O thread so it can respond to a state change. * * @returns VBox status code. * @param pDevIns The pcnet device instance. * @param pThread The send thread. */ static DECLCALLBACK(int) ahciAsyncIOLoopWakeUp(PPDMDEVINS pDevIns, PPDMTHREAD pThread) { PAHCIPort pAhciPort = (PAHCIPort)pThread->pvUser; return RTSemEventSignal(pAhciPort->AsyncIORequestSem); } /** * Called when a media is mounted. * * @param pInterface Pointer to the interface structure containing the called function pointer. */ static DECLCALLBACK(void) ahciMountNotify(PPDMIMOUNTNOTIFY pInterface) { PAHCIPort pAhciPort = PDMIMOUNTNOTIFY_2_PAHCIPORT(pInterface); Log(("%s: changing LUN#%d\n", __FUNCTION__, pAhciPort->iLUN)); /* Ignore the call if we're called while being attached. */ if (!pAhciPort->pDrvBlock) return; pAhciPort->cTotalSectors = pAhciPort->pDrvBlock->pfnGetSize(pAhciPort->pDrvBlock) / 512; /* * Initialize registers */ pAhciPort->regCMD |= AHCI_PORT_CMD_CPS; ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_CPDS | AHCI_PORT_IS_PRCS); pAhciPort->regSERR |= AHCI_PORT_SERR_N; if (pAhciPort->regIE & AHCI_PORT_IE_CPDE) ahciHbaSetInterrupt(pAhciPort->CTX_SUFF(pAhci), pAhciPort->iLUN); } /** * Called when a media is unmounted * @param pInterface Pointer to the interface structure containing the called function pointer. */ static DECLCALLBACK(void) ahciUnmountNotify(PPDMIMOUNTNOTIFY pInterface) { PAHCIPort pAhciPort = PDMIMOUNTNOTIFY_2_PAHCIPORT(pInterface); Log(("%s:\n", __FUNCTION__)); pAhciPort->cTotalSectors = 0; /* * Inform the guest about the removed device. */ pAhciPort->regSSTS = 0; pAhciPort->regCMD &= ~AHCI_PORT_CMD_CPS; ASMAtomicOrU32(&pAhciPort->regIS, AHCI_PORT_IS_CPDS | AHCI_PORT_IS_PRCS); pAhciPort->regSERR |= AHCI_PORT_SERR_N; if (pAhciPort->regIE & AHCI_PORT_IE_CPDE) ahciHbaSetInterrupt(pAhciPort->CTX_SUFF(pAhci), pAhciPort->iLUN); } /* -=-=-=-=- Helper -=-=-=-=- */ /** * Checks if all asynchronous I/O is finished, both AHCI and IDE. * * Used by ahciR3Reset, ahciR3Suspend and ahciR3PowerOff. ahciR3SavePrep makes * use of it in strict builds (which is why it's up here). * * @returns true if quiesced, false if busy. * @param pDevIns The device instance. */ static bool ahciR3AllAsyncIOIsFinished(PPDMDEVINS pDevIns) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); for (uint32_t i = 0; i < RT_ELEMENTS(pThis->ahciPort); i++) { PAHCIPort pThisPort = &pThis->ahciPort[i]; if (pThisPort->pDrvBase) { bool fFinished; if (pThisPort->fAsyncInterface) fFinished = (pThisPort->uActTasksActive == 0); else fFinished = ((pThisPort->uActTasksActive == 0) && (pThisPort->fAsyncIOThreadIdle)); if (!fFinished) return false; } } for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) if (!ataControllerIsIdle(&pThis->aCts[i])) return false; return true; } /* -=-=-=-=- Saved State -=-=-=-=- */ /** * @copydoc FNDEVSSMSAVEPREP */ static DECLCALLBACK(int) ahciR3SavePrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { Assert(ahciR3AllAsyncIOIsFinished(pDevIns)); return VINF_SUCCESS; } /** * @copydoc FNDEVSSMLOADPREP */ static DECLCALLBACK(int) ahciR3LoadPrep(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { Assert(ahciR3AllAsyncIOIsFinished(pDevIns)); return VINF_SUCCESS; } /** * @copydoc FNDEVSSMLIVEEXEC */ static DECLCALLBACK(int) ahciR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); /* config. */ SSMR3PutU32(pSSM, pThis->cPortsImpl); for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { SSMR3PutBool(pSSM, pThis->ahciPort[i].pDrvBase != NULL); SSMR3PutStrZ(pSSM, pThis->ahciPort[i].szSerialNumber); SSMR3PutStrZ(pSSM, pThis->ahciPort[i].szFirmwareRevision); SSMR3PutStrZ(pSSM, pThis->ahciPort[i].szModelNumber); } static const char *s_apszIdeEmuPortNames[4] = { "PrimaryMaster", "PrimarySlave", "SecondaryMaster", "SecondarySlave" }; for (size_t i = 0; i < RT_ELEMENTS(s_apszIdeEmuPortNames); i++) { uint32_t iPort; int rc = CFGMR3QueryU32Def(pDevIns->pCfg, s_apszIdeEmuPortNames[i], &iPort, i); AssertRCReturn(rc, rc); SSMR3PutU32(pSSM, iPort); } return VINF_SSM_DONT_CALL_AGAIN; } /** * @copydoc FNDEVSSMSAVEEXEC */ static DECLCALLBACK(int) ahciR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); uint32_t i; int rc; Assert(!pThis->f8ByteMMIO4BytesWrittenSuccessfully); /* The config */ rc = ahciR3LiveExec(pDevIns, pSSM, SSM_PASS_FINAL); AssertRCReturn(rc, rc); /* The main device structure. */ SSMR3PutU32(pSSM, pThis->regHbaCap); SSMR3PutU32(pSSM, pThis->regHbaCtrl); SSMR3PutU32(pSSM, pThis->regHbaIs); SSMR3PutU32(pSSM, pThis->regHbaPi); SSMR3PutU32(pSSM, pThis->regHbaVs); SSMR3PutU32(pSSM, pThis->regHbaCccCtl); SSMR3PutU32(pSSM, pThis->regHbaCccPorts); SSMR3PutU8(pSSM, pThis->uCccPortNr); SSMR3PutU64(pSSM, pThis->uCccTimeout); SSMR3PutU32(pSSM, pThis->uCccNr); SSMR3PutU32(pSSM, pThis->uCccCurrentNr); SSMR3PutU32(pSSM, pThis->u32PortsInterrupted); SSMR3PutBool(pSSM, pThis->fReset); SSMR3PutBool(pSSM, pThis->f64BitAddr); SSMR3PutBool(pSSM, pThis->fR0Enabled); SSMR3PutBool(pSSM, pThis->fGCEnabled); /* Now every port. */ for (i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { Assert(pThis->ahciPort[i].uActTasksActive == 0); SSMR3PutU32(pSSM, pThis->ahciPort[i].regCLB); SSMR3PutU32(pSSM, pThis->ahciPort[i].regCLBU); SSMR3PutU32(pSSM, pThis->ahciPort[i].regFB); SSMR3PutU32(pSSM, pThis->ahciPort[i].regFBU); SSMR3PutGCPhys(pSSM, pThis->ahciPort[i].GCPhysAddrClb); SSMR3PutGCPhys(pSSM, pThis->ahciPort[i].GCPhysAddrFb); SSMR3PutU32(pSSM, pThis->ahciPort[i].regIS); SSMR3PutU32(pSSM, pThis->ahciPort[i].regIE); SSMR3PutU32(pSSM, pThis->ahciPort[i].regCMD); SSMR3PutU32(pSSM, pThis->ahciPort[i].regTFD); SSMR3PutU32(pSSM, pThis->ahciPort[i].regSIG); SSMR3PutU32(pSSM, pThis->ahciPort[i].regSSTS); SSMR3PutU32(pSSM, pThis->ahciPort[i].regSCTL); SSMR3PutU32(pSSM, pThis->ahciPort[i].regSERR); SSMR3PutU32(pSSM, pThis->ahciPort[i].regSACT); SSMR3PutU32(pSSM, pThis->ahciPort[i].regCI); SSMR3PutU32(pSSM, pThis->ahciPort[i].PCHSGeometry.cCylinders); SSMR3PutU32(pSSM, pThis->ahciPort[i].PCHSGeometry.cHeads); SSMR3PutU32(pSSM, pThis->ahciPort[i].PCHSGeometry.cSectors); SSMR3PutU64(pSSM, pThis->ahciPort[i].cTotalSectors); SSMR3PutU32(pSSM, pThis->ahciPort[i].cMultSectors); SSMR3PutU8(pSSM, pThis->ahciPort[i].uATATransferMode); SSMR3PutBool(pSSM, pThis->ahciPort[i].fResetDevice); /* No need to save */ SSMR3PutU8(pSSM, pThis->ahciPort[i].uActWritePos); SSMR3PutU8(pSSM, pThis->ahciPort[i].uActReadPos); SSMR3PutBool(pSSM, pThis->ahciPort[i].fPoweredOn); SSMR3PutBool(pSSM, pThis->ahciPort[i].fSpunUp); SSMR3PutU32(pSSM, pThis->ahciPort[i].u32TasksFinished); SSMR3PutU32(pSSM, pThis->ahciPort[i].u32QueuedTasksFinished); } /* Now the emulated ata controllers. */ for (i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { rc = ataControllerSaveExec(&pThis->aCts[i], pSSM); if (RT_FAILURE(rc)) return rc; } return SSMR3PutU32(pSSM, UINT32_MAX); /* sanity/terminator */ } /** * Loads a saved AHCI device state. * * @returns VBox status code. * @param pDevIns The device instance. * @param pSSM The handle to the saved state. * @param uVersion The data unit version number. * @param uPass The data pass. */ static DECLCALLBACK(int) ahciR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); uint32_t u32; int rc; if ( uVersion != AHCI_SAVED_STATE_VERSION && uVersion != AHCI_SAVED_STATE_VERSION_VBOX_30) return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION; /* Verify config. */ if (uVersion > AHCI_SAVED_STATE_VERSION_VBOX_30) { rc = SSMR3GetU32(pSSM, &u32); AssertRCReturn(rc, rc); if (u32 != pThis->cPortsImpl) { LogRel(("AHCI: Config mismatch: cPortsImpl - saved=%u config=%u\n", u32, pThis->cPortsImpl)); if ( u32 < pThis->cPortsImpl || u32 > AHCI_MAX_NR_PORTS_IMPL) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("Config mismatch: cPortsImpl - saved=%u config=%u"), u32, pThis->cPortsImpl); } for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { bool fInUse; rc = SSMR3GetBool(pSSM, &fInUse); AssertRCReturn(rc, rc); if (fInUse != (pThis->ahciPort[i].pDrvBase != NULL)) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("The %s VM is missing a device on port %u. Please make sure the source and target VMs have compatible storage configurations"), fInUse ? "target" : "source", i ); char szSerialNumber[AHCI_SERIAL_NUMBER_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szSerialNumber, sizeof(szSerialNumber)); AssertRCReturn(rc, rc); if (strcmp(szSerialNumber, pThis->ahciPort[i].szSerialNumber)) LogRel(("AHCI: Port %u config mismatch: Serial number - saved='%s' config='%s'\n", i, szSerialNumber, pThis->ahciPort[i].szSerialNumber)); char szFirmwareRevision[AHCI_FIRMWARE_REVISION_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szFirmwareRevision, sizeof(szFirmwareRevision)); AssertRCReturn(rc, rc); if (strcmp(szFirmwareRevision, pThis->ahciPort[i].szFirmwareRevision)) LogRel(("AHCI: Port %u config mismatch: Firmware revision - saved='%s' config='%s'\n", i, szFirmwareRevision, pThis->ahciPort[i].szFirmwareRevision)); char szModelNumber[AHCI_MODEL_NUMBER_LENGTH+1]; rc = SSMR3GetStrZ(pSSM, szModelNumber, sizeof(szModelNumber)); AssertRCReturn(rc, rc); if (strcmp(szModelNumber, pThis->ahciPort[i].szModelNumber)) LogRel(("AHCI: Port %u config mismatch: Model number - saved='%s' config='%s'\n", i, szModelNumber, pThis->ahciPort[i].szModelNumber)); } static const char *s_apszIdeEmuPortNames[4] = { "PrimaryMaster", "PrimarySlave", "SecondaryMaster", "SecondarySlave" }; for (size_t i = 0; i < RT_ELEMENTS(s_apszIdeEmuPortNames); i++) { uint32_t iPort; rc = CFGMR3QueryU32Def(pDevIns->pCfg, s_apszIdeEmuPortNames[i], &iPort, i); AssertRCReturn(rc, rc); uint32_t iPortSaved; rc = SSMR3GetU32(pSSM, &iPortSaved); AssertRCReturn(rc, rc); if (iPortSaved != iPort) return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("IDE %s config mismatch: saved=%u config=%u"), s_apszIdeEmuPortNames[i], iPortSaved, iPort); } } if (uPass == SSM_PASS_FINAL) { /* Restore data. */ /* The main device structure. */ SSMR3GetU32(pSSM, &pThis->regHbaCap); SSMR3GetU32(pSSM, &pThis->regHbaCtrl); SSMR3GetU32(pSSM, &pThis->regHbaIs); SSMR3GetU32(pSSM, &pThis->regHbaPi); SSMR3GetU32(pSSM, &pThis->regHbaVs); SSMR3GetU32(pSSM, &pThis->regHbaCccCtl); SSMR3GetU32(pSSM, &pThis->regHbaCccPorts); SSMR3GetU8(pSSM, &pThis->uCccPortNr); SSMR3GetU64(pSSM, &pThis->uCccTimeout); SSMR3GetU32(pSSM, &pThis->uCccNr); SSMR3GetU32(pSSM, &pThis->uCccCurrentNr); SSMR3GetU32(pSSM, &pThis->u32PortsInterrupted); SSMR3GetBool(pSSM, &pThis->fReset); SSMR3GetBool(pSSM, &pThis->f64BitAddr); SSMR3GetBool(pSSM, &pThis->fR0Enabled); SSMR3GetBool(pSSM, &pThis->fGCEnabled); /* Now every port. */ for (uint32_t i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { SSMR3GetU32(pSSM, &pThis->ahciPort[i].regCLB); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regCLBU); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regFB); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regFBU); SSMR3GetGCPhys(pSSM, (RTGCPHYS *)&pThis->ahciPort[i].GCPhysAddrClb); SSMR3GetGCPhys(pSSM, (RTGCPHYS *)&pThis->ahciPort[i].GCPhysAddrFb); SSMR3GetU32(pSSM, (uint32_t *)&pThis->ahciPort[i].regIS); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regIE); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regCMD); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regTFD); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regSIG); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regSSTS); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regSCTL); SSMR3GetU32(pSSM, &pThis->ahciPort[i].regSERR); SSMR3GetU32(pSSM, (uint32_t *)&pThis->ahciPort[i].regSACT); SSMR3GetU32(pSSM, (uint32_t *)&pThis->ahciPort[i].regCI); SSMR3GetU32(pSSM, &pThis->ahciPort[i].PCHSGeometry.cCylinders); SSMR3GetU32(pSSM, &pThis->ahciPort[i].PCHSGeometry.cHeads); SSMR3GetU32(pSSM, &pThis->ahciPort[i].PCHSGeometry.cSectors); SSMR3GetU64(pSSM, &pThis->ahciPort[i].cTotalSectors); SSMR3GetU32(pSSM, &pThis->ahciPort[i].cMultSectors); SSMR3GetU8(pSSM, &pThis->ahciPort[i].uATATransferMode); SSMR3GetBool(pSSM, &pThis->ahciPort[i].fResetDevice); if (uVersion <= AHCI_SAVED_STATE_VERSION_VBOX_30) SSMR3Skip(pSSM, AHCI_NR_COMMAND_SLOTS * sizeof(uint8_t)); /* no active data here */ SSMR3GetU8(pSSM, &pThis->ahciPort[i].uActWritePos); SSMR3GetU8(pSSM, &pThis->ahciPort[i].uActReadPos); SSMR3GetBool(pSSM, &pThis->ahciPort[i].fPoweredOn); SSMR3GetBool(pSSM, &pThis->ahciPort[i].fSpunUp); SSMR3GetU32(pSSM, (uint32_t *)&pThis->ahciPort[i].u32TasksFinished); SSMR3GetU32(pSSM, (uint32_t *)&pThis->ahciPort[i].u32QueuedTasksFinished); } /* Now the emulated ata controllers. */ for (uint32_t i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { rc = ataControllerLoadExec(&pThis->aCts[i], pSSM); if (RT_FAILURE(rc)) return rc; } rc = SSMR3GetU32(pSSM, &u32); if (RT_FAILURE(rc)) return rc; AssertMsgReturn(u32 == UINT32_MAX, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED); } return VINF_SUCCESS; } /* -=-=-=-=- device PDM interface -=-=-=-=- */ static DECLCALLBACK(void) ahciR3Relocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta) { uint32_t i; PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); pAhci->pDevInsRC += offDelta; pAhci->pHbaCccTimerRC = TMTimerRCPtr(pAhci->pHbaCccTimerR3); pAhci->pNotifierQueueRC = PDMQueueRCPtr(pAhci->pNotifierQueueR3); /* Relocate every port. */ for (i = 0; i < RT_ELEMENTS(pAhci->ahciPort); i++) { PAHCIPort pAhciPort = &pAhci->ahciPort[i]; pAhciPort->pAhciRC += offDelta; pAhciPort->pDevInsRC += offDelta; } /* Relocate emulated ATA controllers. */ for (i = 0; i < RT_ELEMENTS(pAhci->aCts); i++) ataControllerRelocate(&pAhci->aCts[i], offDelta); } /** * Destroy a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDevIns The device instance data. */ static DECLCALLBACK(int) ahciR3Destruct(PPDMDEVINS pDevIns) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); int rc = VINF_SUCCESS; unsigned iActPort = 0; PDMDEV_CHECK_VERSIONS_RETURN_QUIET(pDevIns); /* * At this point the async I/O thread is suspended and will not enter * this module again. So, no coordination is needed here and PDM * will take care of terminating and cleaning up the thread. */ if (PDMCritSectIsInitialized(&pAhci->lock)) { TMR3TimerDestroy(pAhci->CTX_SUFF(pHbaCccTimer)); Log(("%s: Destruct every port\n", __FUNCTION__)); for (iActPort = 0; iActPort < pAhci->cPortsImpl; iActPort++) { PAHCIPort pAhciPort = &pAhci->ahciPort[iActPort]; if (pAhciPort->pAsyncIOThread) { /* Destroy the event semaphore. */ rc = RTSemEventDestroy(pAhciPort->AsyncIORequestSem); if (RT_FAILURE(rc)) { Log(("%s: Destroying event semaphore for port %d failed rc=%Rrc\n", __FUNCTION__, iActPort, rc)); } } /* Free all cached tasks. */ for (uint32_t i = 0; i < AHCI_NR_COMMAND_SLOTS; i++) { if (pAhciPort->aCachedTasks[i]) { if (pAhciPort->aCachedTasks[i]->pSGListHead) RTMemFree(pAhciPort->aCachedTasks[i]->pSGListHead); if (pAhciPort->aCachedTasks[i]->paSGEntries) RTMemFree(pAhciPort->aCachedTasks[i]->paSGEntries); RTMemFree(pAhciPort->aCachedTasks[i]); } } } /* Destroy emulated ATA controllers. */ for (unsigned i = 0; i < RT_ELEMENTS(pAhci->aCts); i++) ataControllerDestroy(&pAhci->aCts[i]); PDMR3CritSectDelete(&pAhci->lock); } return rc; } /** * Configure the attached device for a port. * * Used by ahciR3Construct and ahciR3Attach. * * @returns VBox status code * @param pDevIns The device instance data. * @param pAhciPort The port for which the device is to be configured. */ static int ahciR3ConfigureLUN(PPDMDEVINS pDevIns, PAHCIPort pAhciPort) { int rc = VINF_SUCCESS; PDMBLOCKTYPE enmType; /* * Query the block and blockbios interfaces. */ pAhciPort->pDrvBlock = PDMIBASE_QUERY_INTERFACE(pAhciPort->pDrvBase, PDMIBLOCK); if (!pAhciPort->pDrvBlock) { AssertMsgFailed(("Configuration error: LUN#%d hasn't a block interface!\n", pAhciPort->iLUN)); return VERR_PDM_MISSING_INTERFACE; } pAhciPort->pDrvBlockBios = PDMIBASE_QUERY_INTERFACE(pAhciPort->pDrvBase, PDMIBLOCKBIOS); if (!pAhciPort->pDrvBlockBios) { AssertMsgFailed(("Configuration error: LUN#%d hasn't a block BIOS interface!\n", pAhciPort->iLUN)); return VERR_PDM_MISSING_INTERFACE; } pAhciPort->pDrvMount = PDMIBASE_QUERY_INTERFACE(pAhciPort->pDrvBase, PDMIMOUNT); /* Try to get the optional async block interface. */ pAhciPort->pDrvBlockAsync = PDMIBASE_QUERY_INTERFACE(pAhciPort->pDrvBase, PDMIBLOCKASYNC); /* * Validate type. */ enmType = pAhciPort->pDrvBlock->pfnGetType(pAhciPort->pDrvBlock); if ( enmType != PDMBLOCKTYPE_HARD_DISK && enmType != PDMBLOCKTYPE_CDROM && enmType != PDMBLOCKTYPE_DVD) { AssertMsgFailed(("Configuration error: LUN#%d isn't a disk or cd/dvd. enmType=%d\n", pAhciPort->iLUN, enmType)); return VERR_PDM_UNSUPPORTED_BLOCK_TYPE; } if ( (enmType == PDMBLOCKTYPE_CDROM || enmType == PDMBLOCKTYPE_DVD) && !pAhciPort->pDrvMount) { AssertMsgFailed(("Internal error: CD/DVD-ROM without a mountable interface\n")); return VERR_INTERNAL_ERROR; } pAhciPort->fATAPI = (enmType == PDMBLOCKTYPE_CDROM || enmType == PDMBLOCKTYPE_DVD); if (pAhciPort->fATAPI) { pAhciPort->cTotalSectors = pAhciPort->pDrvBlock->pfnGetSize(pAhciPort->pDrvBlock) / 2048; pAhciPort->PCHSGeometry.cCylinders = 0; pAhciPort->PCHSGeometry.cHeads = 0; pAhciPort->PCHSGeometry.cSectors = 0; LogRel(("AHCI LUN#%d: CD/DVD, total number of sectors %Ld\n", pAhciPort->iLUN, pAhciPort->cTotalSectors)); } else { pAhciPort->cTotalSectors = pAhciPort->pDrvBlock->pfnGetSize(pAhciPort->pDrvBlock) / 512; rc = pAhciPort->pDrvBlockBios->pfnGetPCHSGeometry(pAhciPort->pDrvBlockBios, &pAhciPort->PCHSGeometry); if (rc == VERR_PDM_MEDIA_NOT_MOUNTED) { pAhciPort->PCHSGeometry.cCylinders = 0; pAhciPort->PCHSGeometry.cHeads = 16; /*??*/ pAhciPort->PCHSGeometry.cSectors = 63; /*??*/ } else if (rc == VERR_PDM_GEOMETRY_NOT_SET) { pAhciPort->PCHSGeometry.cCylinders = 0; /* autodetect marker */ rc = VINF_SUCCESS; } AssertRC(rc); if ( pAhciPort->PCHSGeometry.cCylinders == 0 || pAhciPort->PCHSGeometry.cHeads == 0 || pAhciPort->PCHSGeometry.cSectors == 0) { uint64_t cCylinders = pAhciPort->cTotalSectors / (16 * 63); pAhciPort->PCHSGeometry.cCylinders = RT_MAX(RT_MIN(cCylinders, 16383), 1); pAhciPort->PCHSGeometry.cHeads = 16; pAhciPort->PCHSGeometry.cSectors = 63; /* Set the disk geometry information. Ignore errors. */ pAhciPort->pDrvBlockBios->pfnSetPCHSGeometry(pAhciPort->pDrvBlockBios, &pAhciPort->PCHSGeometry); rc = VINF_SUCCESS; } LogRel(("AHCI: LUN#%d: disk, PCHS=%u/%u/%u, total number of sectors %Ld\n", pAhciPort->iLUN, pAhciPort->PCHSGeometry.cCylinders, pAhciPort->PCHSGeometry.cHeads, pAhciPort->PCHSGeometry.cSectors, pAhciPort->cTotalSectors)); } return rc; } /** * Callback employed by ahciR3Suspend and ahciR3PowerOff.. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ahciR3IsAsyncSuspendOrPowerOffDone(PPDMDEVINS pDevIns) { if (!ahciR3AllAsyncIOIsFinished(pDevIns)) return false; PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); ASMAtomicWriteBool(&pThis->fSignalIdle, false); return true; } /** * Common worker for ahciR3Suspend and ahciR3PowerOff. */ static void ahciR3SuspendOrPowerOff(PPDMDEVINS pDevIns) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); ASMAtomicWriteBool(&pThis->fSignalIdle, true); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ahciR3IsAsyncSuspendOrPowerOffDone); else ASMAtomicWriteBool(&pThis->fSignalIdle, false); } /** * Suspend notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Suspend(PPDMDEVINS pDevIns) { Log(("ahciR3Suspend\n")); ahciR3SuspendOrPowerOff(pDevIns); } /** * Resume notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Resume(PPDMDEVINS pDevIns) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); Log(("%s:\n", __FUNCTION__)); for (uint32_t i = 0; i < RT_ELEMENTS(pAhci->aCts); i++) ataControllerResume(&pAhci->aCts[i]); return; } /** * Detach notification. * * One harddisk at one port has been unplugged. * The VM is suspended at this point. * * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(void) ahciR3Detach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIPort pAhciPort = &pAhci->ahciPort[iLUN]; int rc = VINF_SUCCESS; Log(("%s:\n", __FUNCTION__)); AssertMsg(iLUN < pAhci->cPortsImpl, ("iLUN=%u", iLUN)); if (!pAhciPort->fAsyncInterface) { int rcThread; /* Destroy the thread. */ rc = PDMR3ThreadDestroy(pAhciPort->pAsyncIOThread, &rcThread); if (RT_FAILURE(rc) || RT_FAILURE(rcThread)) AssertMsgFailed(("%s Failed to destroy async IO thread rc=%Rrc rcThread=%Rrc\n", __FUNCTION__, rc, rcThread)); rc = RTSemEventDestroy(pAhciPort->AsyncIORequestSem); if (RT_FAILURE(rc)) AssertMsgFailed(("%s: Failed to destroy the event semaphore rc=%Rrc.\n", __FUNCTION__, rc)); } /* * Zero some important members. */ pAhciPort->pDrvBase = NULL; pAhciPort->pDrvBlock = NULL; pAhciPort->pDrvBlockAsync = NULL; pAhciPort->pDrvBlockBios = NULL; } /** * Attach command. * * This is called when we change block driver for one port. * The VM is suspended at this point. * * @returns VBox status code. * @param pDevIns The device instance. * @param iLUN The logical unit which is being detached. * @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines. */ static DECLCALLBACK(int) ahciR3Attach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); PAHCIPort pAhciPort = &pAhci->ahciPort[iLUN]; int rc; Log(("%s:\n", __FUNCTION__)); /* the usual paranoia */ AssertMsg(iLUN < pAhci->cPortsImpl, ("iLUN=%u", iLUN)); AssertRelease(!pAhciPort->pDrvBase); AssertRelease(!pAhciPort->pDrvBlock); AssertRelease(!pAhciPort->pDrvBlockAsync); Assert(pAhciPort->iLUN == iLUN); /* * Try attach the block device and get the interfaces, * required as well as optional. */ rc = PDMDevHlpDriverAttach(pDevIns, pAhciPort->iLUN, &pAhciPort->IBase, &pAhciPort->pDrvBase, NULL); if (RT_SUCCESS(rc)) rc = ahciR3ConfigureLUN(pDevIns, pAhciPort); else AssertMsgFailed(("Failed to attach LUN#%d. rc=%Rrc\n", pAhciPort->iLUN, rc)); if (RT_FAILURE(rc)) { pAhciPort->pDrvBase = NULL; pAhciPort->pDrvBlock = NULL; } else { char szName[24]; RTStrPrintf(szName, sizeof(szName), "Port%d", iLUN); if (pAhciPort->pDrvBlockAsync) { pAhciPort->fAsyncInterface = true; } else { pAhciPort->fAsyncInterface = false; /* Create event semaphore. */ rc = RTSemEventCreate(&pAhciPort->AsyncIORequestSem); if (RT_FAILURE(rc)) { Log(("%s: Failed to create event semaphore for %s.\n", __FUNCTION__, szName)); return rc; } /* Create the async IO thread. */ rc = PDMDevHlpThreadCreate(pDevIns, &pAhciPort->pAsyncIOThread, pAhciPort, ahciAsyncIOLoop, ahciAsyncIOLoopWakeUp, 0, RTTHREADTYPE_IO, szName); if (RT_FAILURE(rc)) { AssertMsgFailed(("%s: Async IO Thread creation for %s failed rc=%d\n", __FUNCTION__, szName, rc)); return rc; } } } return rc; } /** * Common reset worker. * * @param pDevIns The device instance data. */ static int ahciR3ResetCommon(PPDMDEVINS pDevIns, bool fConstructor) { PAHCI pAhci = PDMINS_2_DATA(pDevIns, PAHCI); ahciHBAReset(pAhci); /* Hardware reset for the ports. */ for (uint32_t i = 0; i < RT_ELEMENTS(pAhci->ahciPort); i++) ahciPortHwReset(&pAhci->ahciPort[i]); for (uint32_t i = 0; i < RT_ELEMENTS(pAhci->aCts); i++) ataControllerReset(&pAhci->aCts[i]); return VINF_SUCCESS; } /** * Callback employed by ahciR3Reset. * * @returns true if we've quiesced, false if we're still working. * @param pDevIns The device instance. */ static DECLCALLBACK(bool) ahciR3IsAsyncResetDone(PPDMDEVINS pDevIns) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) return false; ASMAtomicWriteBool(&pThis->fSignalIdle, false); ahciR3ResetCommon(pDevIns, false /*fConstructor*/); return true; } /** * Reset notification. * * @param pDevIns The device instance data. */ static DECLCALLBACK(void) ahciR3Reset(PPDMDEVINS pDevIns) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); ASMAtomicWriteBool(&pThis->fSignalIdle, true); if (!ahciR3AllAsyncIOIsFinished(pDevIns)) PDMDevHlpSetAsyncNotification(pDevIns, ahciR3IsAsyncResetDone); else { ASMAtomicWriteBool(&pThis->fSignalIdle, false); ahciR3ResetCommon(pDevIns, false /*fConstructor*/); } } /** * Poweroff notification. * * @param pDevIns Pointer to the device instance */ static DECLCALLBACK(void) ahciR3PowerOff(PPDMDEVINS pDevIns) { Log(("achiR3PowerOff\n")); ahciR3SuspendOrPowerOff(pDevIns); } /** * @interface_method_impl{PDMDEVREG,pfnConstruct} */ static DECLCALLBACK(int) ahciR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg) { PAHCI pThis = PDMINS_2_DATA(pDevIns, PAHCI); PPDMIBASE pBase; int rc = VINF_SUCCESS; unsigned i = 0; bool fGCEnabled = false; bool fR0Enabled = false; uint32_t cbTotalBufferSize = 0; PDMDEV_CHECK_VERSIONS_RETURN(pDevIns); /* * Validate and read configuration. */ if (!CFGMR3AreValuesValid(pCfg, "GCEnabled\0" "R0Enabled\0" "PrimaryMaster\0" "PrimarySlave\0" "SecondaryMaster\0" "SecondarySlave\0" "PortCount\0" "UseAsyncInterfaceIfAvailable\0" "HighIOThreshold\0" "MillisToSleep\0")) return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES, N_("AHCI configuration error: unknown option specified")); rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read GCEnabled as boolean")); Log(("%s: fGCEnabled=%d\n", __FUNCTION__, fGCEnabled)); rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read R0Enabled as boolean")); Log(("%s: fR0Enabled=%d\n", __FUNCTION__, fR0Enabled)); rc = CFGMR3QueryU32Def(pCfg, "PortCount", &pThis->cPortsImpl, AHCI_MAX_NR_PORTS_IMPL); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read PortCount as integer")); Log(("%s: cPortsImpl=%u\n", __FUNCTION__, pThis->cPortsImpl)); if (pThis->cPortsImpl > AHCI_MAX_NR_PORTS_IMPL) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: PortCount=%u should not exceed %u"), pThis->cPortsImpl, AHCI_MAX_NR_PORTS_IMPL); if (pThis->cPortsImpl < 1) return PDMDevHlpVMSetError(pDevIns, VERR_INVALID_PARAMETER, RT_SRC_POS, N_("AHCI configuration error: PortCount=%u should be at least 1"), pThis->cPortsImpl); rc = CFGMR3QueryBoolDef(pCfg, "UseAsyncInterfaceIfAvailable", &pThis->fUseAsyncInterfaceIfAvailable, true); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read UseAsyncInterfaceIfAvailable as boolean")); rc = CFGMR3QueryU32Def(pCfg, "HighIOThreshold", &pThis->cHighIOThreshold, ~0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read HighIOThreshold as integer")); rc = CFGMR3QueryU32Def(pCfg, "MillisToSleep", &pThis->cMillisToSleep, 0); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read MillisToSleep as integer")); pThis->fR0Enabled = fR0Enabled; pThis->fGCEnabled = fGCEnabled; pThis->pDevInsR3 = pDevIns; pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); PCIDevSetVendorId (&pThis->dev, 0x8086); /* Intel */ PCIDevSetDeviceId (&pThis->dev, 0x2829); /* ICH-8M */ PCIDevSetCommand (&pThis->dev, 0x0000); PCIDevSetRevisionId (&pThis->dev, 0x02); PCIDevSetClassProg (&pThis->dev, 0x01); PCIDevSetClassSub (&pThis->dev, 0x06); PCIDevSetClassBase (&pThis->dev, 0x01); PCIDevSetBaseAddress (&pThis->dev, 5, false, false, false, 0x00000000); pThis->dev.config[0x34] = 0x80; /* Capability pointer. */ PCIDevSetInterruptLine(&pThis->dev, 0x00); PCIDevSetInterruptPin (&pThis->dev, 0x01); pThis->dev.config[0x70] = 0x01; /* Capability ID: PCI Power Management Interface */ pThis->dev.config[0x71] = 0x00; pThis->dev.config[0x72] = 0x03; pThis->dev.config[0x80] = 0x05; /* Capability ID: Message Signaled Interrupts. Disabled. */ pThis->dev.config[0x81] = 0x70; /* next. */ pThis->dev.config[0x90] = 0x40; /* AHCI mode. */ pThis->dev.config[0x92] = 0x3f; pThis->dev.config[0x94] = 0x80; pThis->dev.config[0x95] = 0x01; pThis->dev.config[0x97] = 0x78; /* * Register the PCI device, it's I/O regions. */ rc = PDMDevHlpPCIRegister (pDevIns, &pThis->dev); if (RT_FAILURE(rc)) return rc; /* * Solaris 10 U5 fails to map the AHCI register space when the sets (0..5) for the legacy * IDE registers are not available. * We set up "fake" entries in the PCI configuration register. * That means they are available but read and writes from/to them have no effect. * No guest should access them anyway because the controller is marked as AHCI in the Programming interface * and we don't have an option to change to IDE emulation (real hardware provides an option in the BIOS * to switch to it which also changes device Id and other things in the PCI configuration space). */ rc = PDMDevHlpPCIIORegionRegister(pDevIns, 0, 8, PCI_ADDRESS_SPACE_IO, ahciR3LegacyFakeIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region")); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 1, 1, PCI_ADDRESS_SPACE_IO, ahciR3LegacyFakeIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region")); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 2, 8, PCI_ADDRESS_SPACE_IO, ahciR3LegacyFakeIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region")); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 3, 1, PCI_ADDRESS_SPACE_IO, ahciR3LegacyFakeIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region")); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 4, 0x10, PCI_ADDRESS_SPACE_IO, ahciR3LegacyFakeIORangeMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI I/O region for BMDMA")); rc = PDMDevHlpPCIIORegionRegister(pDevIns, 5, 4352, PCI_ADDRESS_SPACE_MEM, ahciR3MMIOMap); if (RT_FAILURE(rc)) return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot register PCI memory region for registers")); rc = PDMDevHlpCritSectInit(pDevIns, &pThis->lock, RT_SRC_POS, "AHCI"); if (RT_FAILURE(rc)) { Log(("%s: Failed to create critical section.\n", __FUNCTION__)); return rc; } /* Create the timer for command completion coalescing feature. */ rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL_SYNC, ahciCccTimer, pThis, TMTIMER_FLAGS_DEFAULT_CRIT_SECT, "AHCI CCC Timer", &pThis->pHbaCccTimerR3); if (RT_FAILURE(rc)) { AssertMsgFailed(("pfnTMTimerCreate -> %Rrc\n", rc)); return rc; } pThis->pHbaCccTimerR0 = TMTimerR0Ptr(pThis->pHbaCccTimerR3); pThis->pHbaCccTimerRC = TMTimerRCPtr(pThis->pHbaCccTimerR3); /* Status LUN. */ pThis->IBase.pfnQueryInterface = ahciR3Status_QueryInterface; pThis->ILeds.pfnQueryStatusLed = ahciR3Status_QueryStatusLed; /* * Create the transmit queue. */ rc = PDMDevHlpQueueCreate(pDevIns, sizeof(DEVPORTNOTIFIERQUEUEITEM), 30*32 /*Maximum of 30 ports multiplied with 32 tasks each port*/, 0, ahciNotifyQueueConsumer, true, "AHCI-Xmit", &pThis->pNotifierQueueR3); if (RT_FAILURE(rc)) return rc; pThis->pNotifierQueueR0 = PDMQueueR0Ptr(pThis->pNotifierQueueR3); pThis->pNotifierQueueRC = PDMQueueRCPtr(pThis->pNotifierQueueR3); /* Initialize static members on every port. */ for (i = 0; i < AHCI_MAX_NR_PORTS_IMPL; i++) { /* * Init members of the port. */ PAHCIPort pAhciPort = &pThis->ahciPort[i]; pAhciPort->pDevInsR3 = pDevIns; pAhciPort->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns); pAhciPort->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns); pAhciPort->iLUN = i; pAhciPort->pAhciR3 = pThis; pAhciPort->pAhciR0 = PDMINS_2_DATA_R0PTR(pDevIns); pAhciPort->pAhciRC = PDMINS_2_DATA_RCPTR(pDevIns); pAhciPort->Led.u32Magic = PDMLED_MAGIC; pAhciPort->pDrvBase = NULL; /* Register statistics counter. */ PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatDMA, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of DMA transfers.", "/Devices/SATA%d/Port%d/DMA", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatBytesRead, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data read.", "/Devices/SATA%d/Port%d/ReadBytes", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatBytesWritten, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Amount of data written.", "/Devices/SATA%d/Port%d/WrittenBytes", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatIORequestsPerSecond, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Number of processed I/O requests per second.", "/Devices/SATA%d/Port%d/IORequestsPerSecond", iInstance, i); #ifdef VBOX_WITH_STATISTICS PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatProfileProcessTime, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_NS_PER_CALL, "Amount of time to process one request.", "/Devices/SATA%d/Port%d/ProfileProcessTime", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatProfileMapIntoR3, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_NS_PER_CALL, "Amount of time to map the guest buffers into R3.", "/Devices/SATA%d/Port%d/ProfileMapIntoR3", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatProfileReadWrite, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_NS_PER_CALL, "Amount of time for the read/write operation to complete.", "/Devices/SATA%d/Port%d/ProfileReadWrite", iInstance, i); PDMDevHlpSTAMRegisterF(pDevIns, &pAhciPort->StatProfileDestroyScatterGatherList, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_NS_PER_CALL, "Amount of time to destroy the scatter gather list and free associated ressources.", "/Devices/SATA%d/Port%d/ProfileDestroyScatterGatherList", iInstance, i); #endif ahciPortHwReset(pAhciPort); } /* Attach drivers to every available port. */ for (i = 0; i < pThis->cPortsImpl; i++) { char szName[24]; RTStrPrintf(szName, sizeof(szName), "Port%u", i); PAHCIPort pAhciPort = &pThis->ahciPort[i]; /* * Init interfaces. */ pAhciPort->IBase.pfnQueryInterface = ahciR3PortQueryInterface; pAhciPort->IPortAsync.pfnTransferCompleteNotify = ahciTransferCompleteNotify; pAhciPort->IMountNotify.pfnMountNotify = ahciMountNotify; pAhciPort->IMountNotify.pfnUnmountNotify = ahciUnmountNotify; pAhciPort->fAsyncIOThreadIdle = true; /* * Attach the block driver */ rc = PDMDevHlpDriverAttach(pDevIns, pAhciPort->iLUN, &pAhciPort->IBase, &pAhciPort->pDrvBase, szName); if (RT_SUCCESS(rc)) { rc = ahciR3ConfigureLUN(pDevIns, pAhciPort); if (RT_FAILURE(rc)) { Log(("%s: Failed to configure the %s.\n", __FUNCTION__, szName)); return rc; } /* Mark that a device is present on that port */ if (i < 6) pThis->dev.config[0x93] |= (1 << i); /* * Init vendor product data. */ /* Generate a default serial number. */ char szSerial[AHCI_SERIAL_NUMBER_LENGTH+1]; RTUUID Uuid; if (pAhciPort->pDrvBlock) rc = pAhciPort->pDrvBlock->pfnGetUuid(pAhciPort->pDrvBlock, &Uuid); else RTUuidClear(&Uuid); if (RT_FAILURE(rc) || RTUuidIsNull(&Uuid)) { /* Generate a predictable serial for drives which don't have a UUID. */ RTStrPrintf(szSerial, sizeof(szSerial), "VB%x-1a2b3c4d", pAhciPort->iLUN); } else RTStrPrintf(szSerial, sizeof(szSerial), "VB%08x-%08x", Uuid.au32[0], Uuid.au32[3]); /* Get user config if present using defaults otherwise. */ PCFGMNODE pCfgNode = CFGMR3GetChild(pCfg, szName); rc = CFGMR3QueryStringDef(pCfgNode, "SerialNumber", pAhciPort->szSerialNumber, sizeof(pAhciPort->szSerialNumber), szSerial); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"SerialNumber\" is longer than 20 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"SerialNumber\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "FirmwareRevision", pAhciPort->szFirmwareRevision, sizeof(pAhciPort->szFirmwareRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"FirmwareRevision\" is longer than 8 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"FirmwareRevision\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ModelNumber", pAhciPort->szModelNumber, sizeof(pAhciPort->szModelNumber), pAhciPort->fATAPI ? "VBOX CD-ROM" : "VBOX HARDDISK"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("AHCI configuration error: \"ModelNumber\" is longer than 40 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI configuration error: failed to read \"ModelNumber\" as string")); } /* There are three other identification strings for CD drives used for INQUIRY */ if (pAhciPort->fATAPI) { rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIVendorId", pAhciPort->szInquiryVendorId, sizeof(pAhciPort->szInquiryVendorId), "VBOX"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIVendorId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIVendorId\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIProductId", pAhciPort->szInquiryProductId, sizeof(pAhciPort->szInquiryProductId), "CD-ROM"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIProductId\" is longer than 16 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIProductId\" as string")); } rc = CFGMR3QueryStringDef(pCfgNode, "ATAPIRevision", pAhciPort->szInquiryRevision, sizeof(pAhciPort->szInquiryRevision), "1.0"); if (RT_FAILURE(rc)) { if (rc == VERR_CFGM_NOT_ENOUGH_SPACE) return PDMDEV_SET_ERROR(pDevIns, VERR_INVALID_PARAMETER, N_("PIIX3 configuration error: \"ATAPIRevision\" is longer than 4 bytes")); return PDMDEV_SET_ERROR(pDevIns, rc, N_("PIIX3 configuration error: failed to read \"ATAPIRevision\" as string")); } } /* * If the new async interface is available we use a PDMQueue to transmit * the requests into R3. * Otherwise we use a event semaphore and a async I/O thread which processes them. */ if (pAhciPort->pDrvBlockAsync && pThis->fUseAsyncInterfaceIfAvailable) { LogRel(("AHCI: LUN#%d: using async I/O\n", pAhciPort->iLUN)); pAhciPort->fAsyncInterface = true; } else { LogRel(("AHCI: LUN#%d: using normal I/O\n", pAhciPort->iLUN)); pAhciPort->fAsyncInterface = false; rc = RTSemEventCreate(&pAhciPort->AsyncIORequestSem); AssertMsgRC(rc, ("Failed to create event semaphore for %s rc=%Rrc.\n", szName, rc)); rc = PDMDevHlpThreadCreate(pDevIns, &pAhciPort->pAsyncIOThread, pAhciPort, ahciAsyncIOLoop, ahciAsyncIOLoopWakeUp, 0, RTTHREADTYPE_IO, szName); AssertMsgRC(rc, ("%s: Async IO Thread creation for %s failed rc=%Rrc\n", szName, rc)); } } else if (rc == VERR_PDM_NO_ATTACHED_DRIVER) { pAhciPort->pDrvBase = NULL; rc = VINF_SUCCESS; LogRel(("%s: no driver attached\n", szName)); } else return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI: Failed to attach drive to %s"), szName); #ifdef DEBUG for (uint32_t j = 0; j < AHCI_NR_COMMAND_SLOTS; j++) pAhciPort->ahciIOTasks[j] = 0xff; #endif } /* * Attach status driver (optional). */ rc = PDMDevHlpDriverAttach(pDevIns, PDM_STATUS_LUN, &pThis->IBase, &pBase, "Status Port"); if (RT_SUCCESS(rc)) pThis->pLedsConnector = PDMIBASE_QUERY_INTERFACE(pBase, PDMILEDCONNECTORS); else if (rc != VERR_PDM_NO_ATTACHED_DRIVER) { AssertMsgFailed(("Failed to attach to status driver. rc=%Rrc\n", rc)); return PDMDEV_SET_ERROR(pDevIns, rc, N_("AHCI cannot attach to status driver")); } /* * Setup IDE emulation. * We only emulate the I/O ports but not bus master DMA. * If the configuration values are not found the setup of the ports is as follows: * Primary Master: Port 0 * Primary Slave: Port 1 * Secondary Master: Port 2 * Secondary Slave: Port 3 */ /* * Setup I/O ports for the PCI device. */ pThis->aCts[0].irq = 12; pThis->aCts[0].IOPortBase1 = 0x1e8; pThis->aCts[0].IOPortBase2 = 0x3e6; pThis->aCts[1].irq = 11; pThis->aCts[1].IOPortBase1 = 0x168; pThis->aCts[1].IOPortBase2 = 0x366; for (i = 0; i < RT_ELEMENTS(pThis->aCts); i++) { PAHCIATACONTROLLER pCtl = &pThis->aCts[i]; uint32_t iPortMaster, iPortSlave; uint32_t cbSSMState = 0; static const char *s_apszDescs[RT_ELEMENTS(pThis->aCts)][RT_ELEMENTS(pCtl->aIfs)] = { { "PrimaryMaster", "PrimarySlave" }, { "SecondaryMaster", "SecondarySlave" } }; rc = CFGMR3QueryU32Def(pCfg, s_apszDescs[i][0], &iPortMaster, 2 * i); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI configuration error: failed to read %s as U32"), s_apszDescs[i][0]); rc = CFGMR3QueryU32Def(pCfg, s_apszDescs[i][1], &iPortSlave, 2 * i + 1); if (RT_FAILURE(rc)) return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS, N_("AHCI configuration error: failed to read %s as U32"), s_apszDescs[i][1]); char szName[24]; RTStrPrintf(szName, sizeof(szName), "EmulatedATA%d", i); rc = ataControllerInit(pDevIns, pCtl, pThis->ahciPort[iPortMaster].pDrvBase, pThis->ahciPort[iPortSlave].pDrvBase, &cbSSMState, szName, &pThis->ahciPort[iPortMaster].Led, &pThis->ahciPort[iPortMaster].StatBytesRead, &pThis->ahciPort[iPortMaster].StatBytesWritten); if (RT_FAILURE(rc)) return rc; cbTotalBufferSize += cbSSMState; rc = PDMDevHlpIOPortRegister(pDevIns, pCtl->IOPortBase1, 8, (RTHCPTR)i, ahciIOPortWrite1, ahciIOPortRead1, ahciIOPortWriteStr1, ahciIOPortReadStr1, "AHCI"); if (RT_FAILURE(rc)) return rc; if (pThis->fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, pCtl->IOPortBase1, 8, (RTR0PTR)i, "ahciIOPortWrite1", "ahciIOPortRead1", NULL, NULL, "AHCI R0"); if (RT_FAILURE(rc)) return rc; } if (pThis->fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, pCtl->IOPortBase1, 8, (RTGCPTR)i, "ahciIOPortWrite1", "ahciIOPortRead1", NULL, NULL, "AHCI GC"); if (RT_FAILURE(rc)) return rc; } rc = PDMDevHlpIOPortRegister(pDevIns, pCtl->IOPortBase2, 1, (RTHCPTR)i, ahciIOPortWrite2, ahciIOPortRead2, NULL, NULL, "AHCI"); if (RT_FAILURE(rc)) return rc; if (pThis->fR0Enabled) { rc = PDMDevHlpIOPortRegisterR0(pDevIns, pCtl->IOPortBase2, 1, (RTR0PTR)i, "ahciIOPortWrite2", "ahciIOPortRead2", NULL, NULL, "AHCI R0"); if (RT_FAILURE(rc)) return rc; } if (pThis->fGCEnabled) { rc = PDMDevHlpIOPortRegisterRC(pDevIns, pCtl->IOPortBase2, 1, (RTGCPTR)i, "ahciIOPortWrite2", "ahciIOPortRead2", NULL, NULL, "AHCI GC"); if (RT_FAILURE(rc)) return rc; } } rc = PDMDevHlpSSMRegisterEx(pDevIns, AHCI_SAVED_STATE_VERSION, sizeof(*pThis)+cbTotalBufferSize, NULL, NULL, ahciR3LiveExec, NULL, ahciR3SavePrep, ahciR3SaveExec, NULL, ahciR3LoadPrep, ahciR3LoadExec, NULL); if (RT_FAILURE(rc)) return rc; return ahciR3ResetCommon(pDevIns, true /*fConstructor*/); } /** * The device registration structure. */ const PDMDEVREG g_DeviceAHCI = { /* u32Version */ PDM_DEVREG_VERSION, /* szName */ "ahci", /* szRCMod */ "VBoxDDGC.gc", /* szR0Mod */ "VBoxDDR0.r0", /* pszDescription */ "Intel AHCI controller.\n", /* fFlags */ PDM_DEVREG_FLAGS_DEFAULT_BITS | PDM_DEVREG_FLAGS_RC | PDM_DEVREG_FLAGS_R0 | PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION | PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION, /* fClass */ PDM_DEVREG_CLASS_STORAGE, /* cMaxInstances */ ~0, /* cbInstance */ sizeof(AHCI), /* pfnConstruct */ ahciR3Construct, /* pfnDestruct */ ahciR3Destruct, /* pfnRelocate */ ahciR3Relocate, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ ahciR3Reset, /* pfnSuspend */ ahciR3Suspend, /* pfnResume */ ahciR3Resume, /* pfnAttach */ ahciR3Attach, /* pfnDetach */ ahciR3Detach, /* pfnQueryInterface. */ NULL, /* pfnInitComplete */ NULL, /* pfnPowerOff */ ahciR3PowerOff, /* pfnSoftReset */ NULL, /* u32VersionEnd */ PDM_DEVREG_VERSION }; #endif /* IN_RING3 */ #endif /* !VBOX_DEVICE_STRUCT_TESTCASE */