Debug.cpp@ 40257

Last change on this file since 40257 was 38622, checked in by vboxsync, 13 years ago
AHCI+DrvBlock+DrvVD: Add support for the TRIM command and connect with the VD discard support.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 46.1 KB

Line
1	/* $Id: Debug.cpp 38622 2011-09-04 17:05:03Z vboxsync $ */
2	/** @file
3	* VBox storage devices: debug helpers
4	*/
5
6	/*
7	* Copyright (C) 2008 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	#include <iprt/assert.h>
20	#include <iprt/types.h>
21	#include <VBox/scsi.h>
22	#include "ide.h"
23
24	/**
25	* ATA command codes
26	*/
27	static const char * const g_apszATACmdNames[256] =
28	{
29	"NOP", /* 0x00 */
30	"", /* 0x01 */
31	"", /* 0x02 */
32	"CFA REQUEST EXTENDED ERROR CODE", /* 0x03 */
33	"", /* 0x04 */
34	"", /* 0x05 */
35	"DATA SET MANAGEMENT", /* 0x06 */
36	"", /* 0x07 */
37	"DEVICE RESET", /* 0x08 */
38	"", /* 0x09 */
39	"", /* 0x0a */
40	"", /* 0x0b */
41	"", /* 0x0c */
42	"", /* 0x0d */
43	"", /* 0x0e */
44	"", /* 0x0f */
45	"RECALIBRATE", /* 0x10 */
46	"", /* 0x11 */
47	"", /* 0x12 */
48	"", /* 0x13 */
49	"", /* 0x14 */
50	"", /* 0x15 */
51	"", /* 0x16 */
52	"", /* 0x17 */
53	"", /* 0x18 */
54	"", /* 0x19 */
55	"", /* 0x1a */
56	"", /* 0x1b */
57	"", /* 0x1c */
58	"", /* 0x1d */
59	"", /* 0x1e */
60	"", /* 0x1f */
61	"READ SECTORS", /* 0x20 */
62	"READ SECTORS WITHOUT RETRIES", /* 0x21 */
63	"READ LONG", /* 0x22 */
64	"READ LONG WITHOUT RETRIES", /* 0x23 */
65	"READ SECTORS EXT", /* 0x24 */
66	"READ DMA EXT", /* 0x25 */
67	"READ DMA QUEUED EXT", /* 0x26 */
68	"READ NATIVE MAX ADDRESS EXT", /* 0x27 */
69	"", /* 0x28 */
70	"READ MULTIPLE EXT", /* 0x29 */
71	"READ STREAM DMA EXT", /* 0x2a */
72	"READ STREAM EXT", /* 0x2b */
73	"", /* 0x2c */
74	"", /* 0x2d */
75	"", /* 0x2e */
76	"READ LOG EXT", /* 0x2f */
77	"WRITE SECTORS", /* 0x30 */
78	"WRITE SECTORS WITHOUT RETRIES", /* 0x31 */
79	"WRITE LONG", /* 0x32 */
80	"WRITE LONG WITHOUT RETRIES", /* 0x33 */
81	"WRITE SECTORS EXT", /* 0x34 */
82	"WRITE DMA EXT", /* 0x35 */
83	"WRITE DMA QUEUED EXT", /* 0x36 */
84	"SET MAX ADDRESS EXT", /* 0x37 */
85	"CFA WRITE SECTORS WITHOUT ERASE", /* 0x38 */
86	"WRITE MULTIPLE EXT", /* 0x39 */
87	"WRITE STREAM DMA EXT", /* 0x3a */
88	"WRITE STREAM EXT", /* 0x3b */
89	"WRITE VERIFY", /* 0x3c */
90	"WRITE DMA FUA EXT", /* 0x3d */
91	"WRITE DMA QUEUED FUA EXT", /* 0x3e */
92	"WRITE LOG EXT", /* 0x3f */
93	"READ VERIFY SECTORS", /* 0x40 */
94	"READ VERIFY SECTORS WITHOUT RETRIES", /* 0x41 */
95	"READ VERIFY SECTORS EXT", /* 0x42 */
96	"", /* 0x43 */
97	"", /* 0x44 */
98	"WRITE UNCORRECTABLE EXT", /* 0x45 */
99	"", /* 0x46 */
100	"READ LOG DMA EXT", /* 0x47 */
101	"", /* 0x48 */
102	"", /* 0x49 */
103	"", /* 0x4a */
104	"", /* 0x4b */
105	"", /* 0x4c */
106	"", /* 0x4d */
107	"", /* 0x4e */
108	"", /* 0x4f */
109	"FORMAT TRACK", /* 0x50 */
110	"CONFIGURE STREAM", /* 0x51 */
111	"", /* 0x52 */
112	"", /* 0x53 */
113	"", /* 0x54 */
114	"", /* 0x55 */
115	"", /* 0x56 */
116	"WRITE LOG DMA EXT", /* 0x57 */
117	"", /* 0x58 */
118	"", /* 0x59 */
119	"", /* 0x5a */
120	"", /* 0x5b */
121	"TRUSTED RECEIVE", /* 0x5c */
122	"TRUSTED RECEIVE DMA", /* 0x5d */
123	"TRUSTED SEND", /* 0x5e */
124	"TRUSTED SEND DMA", /* 0x5f */
125	"READ FPDMA QUEUED", /* 0x60 */
126	"WRITE FPDMA QUEUED", /* 0x61 */
127	"", /* 0x62 */
128	"", /* 0x63 */
129	"", /* 0x64 */
130	"", /* 0x65 */
131	"", /* 0x66 */
132	"", /* 0x67 */
133	"", /* 0x68 */
134	"", /* 0x69 */
135	"", /* 0x6a */
136	"", /* 0x6b */
137	"", /* 0x6c */
138	"", /* 0x6d */
139	"", /* 0x6e */
140	"", /* 0x6f */
141	"SEEK", /* 0x70 */
142	"", /* 0x71 */
143	"", /* 0x72 */
144	"", /* 0x73 */
145	"", /* 0x74 */
146	"", /* 0x75 */
147	"", /* 0x76 */
148	"", /* 0x77 */
149	"", /* 0x78 */
150	"", /* 0x79 */
151	"", /* 0x7a */
152	"", /* 0x7b */
153	"", /* 0x7c */
154	"", /* 0x7d */
155	"", /* 0x7e */
156	"", /* 0x7f */
157	"", /* 0x80 */
158	"", /* 0x81 */
159	"", /* 0x82 */
160	"", /* 0x83 */
161	"", /* 0x84 */
162	"", /* 0x85 */
163	"", /* 0x86 */
164	"CFA TRANSLATE SECTOR", /* 0x87 */
165	"", /* 0x88 */
166	"", /* 0x89 */
167	"", /* 0x8a */
168	"", /* 0x8b */
169	"", /* 0x8c */
170	"", /* 0x8d */
171	"", /* 0x8e */
172	"", /* 0x8f */
173	"EXECUTE DEVICE DIAGNOSTIC", /* 0x90 */
174	"INITIALIZE DEVICE PARAMETERS", /* 0x91 */
175	"DOWNLOAD MICROCODE", /* 0x92 */
176	"", /* 0x93 */
177	"STANDBY IMMEDIATE ALT", /* 0x94 */
178	"IDLE IMMEDIATE ALT", /* 0x95 */
179	"STANDBY ALT", /* 0x96 */
180	"IDLE ALT", /* 0x97 */
181	"CHECK POWER MODE ALT", /* 0x98 */
182	"SLEEP ALT", /* 0x99 */
183	"", /* 0x9a */
184	"", /* 0x9b */
185	"", /* 0x9c */
186	"", /* 0x9d */
187	"", /* 0x9e */
188	"", /* 0x9f */
189	"PACKET", /* 0xa0 */
190	"IDENTIFY PACKET DEVICE", /* 0xa1 */
191	"SERVICE", /* 0xa2 */
192	"", /* 0xa3 */
193	"", /* 0xa4 */
194	"", /* 0xa5 */
195	"", /* 0xa6 */
196	"", /* 0xa7 */
197	"", /* 0xa8 */
198	"", /* 0xa9 */
199	"", /* 0xaa */
200	"", /* 0xab */
201	"", /* 0xac */
202	"", /* 0xad */
203	"", /* 0xae */
204	"", /* 0xaf */
205	"SMART", /* 0xb0 */
206	"DEVICE CONFIGURATION OVERLAY", /* 0xb1 */
207	"", /* 0xb2 */
208	"", /* 0xb3 */
209	"", /* 0xb4 */
210	"", /* 0xb5 */
211	"NV CACHE", /* 0xb6 */
212	"", /* 0xb7 */
213	"", /* 0xb8 */
214	"", /* 0xb9 */
215	"", /* 0xba */
216	"", /* 0xbb */
217	"", /* 0xbc */
218	"", /* 0xbd */
219	"", /* 0xbe */
220	"", /* 0xbf */
221	"CFA ERASE SECTORS", /* 0xc0 */
222	"", /* 0xc1 */
223	"", /* 0xc2 */
224	"", /* 0xc3 */
225	"READ MULTIPLE", /* 0xc4 */
226	"WRITE MULTIPLE", /* 0xc5 */
227	"SET MULTIPLE MODE", /* 0xc6 */
228	"READ DMA QUEUED", /* 0xc7 */
229	"READ DMA", /* 0xc8 */
230	"READ DMA WITHOUT RETRIES", /* 0xc9 */
231	"WRITE DMA", /* 0xca */
232	"WRITE DMA WITHOUT RETRIES", /* 0xcb */
233	"WRITE DMA QUEUED", /* 0xcc */
234	"CFA WRITE MULTIPLE WITHOUT ERASE", /* 0xcd */
235	"WRITE MULTIPLE FUA EXT", /* 0xce */
236	"", /* 0xcf */
237	"", /* 0xd0 */
238	"CHECK MEDIA CARD TYPE", /* 0xd1 */
239	"", /* 0xd2 */
240	"", /* 0xd3 */
241	"", /* 0xd4 */
242	"", /* 0xd5 */
243	"", /* 0xd6 */
244	"", /* 0xd7 */
245	"", /* 0xd8 */
246	"", /* 0xd9 */
247	"GET MEDIA STATUS", /* 0xda */
248	"ACKNOWLEDGE MEDIA CHANGE", /* 0xdb */
249	"BOOT POST BOOT", /* 0xdc */
250	"BOOT PRE BOOT", /* 0xdd */
251	"MEDIA LOCK", /* 0xde */
252	"MEDIA UNLOCK", /* 0xdf */
253	"STANDBY IMMEDIATE", /* 0xe0 */
254	"IDLE IMMEDIATE", /* 0xe1 */
255	"STANDBY", /* 0xe2 */
256	"IDLE", /* 0xe3 */
257	"READ BUFFER", /* 0xe4 */
258	"CHECK POWER MODE", /* 0xe5 */
259	"SLEEP", /* 0xe6 */
260	"FLUSH CACHE", /* 0xe7 */
261	"WRITE BUFFER", /* 0xe8 */
262	"WRITE SAME", /* 0xe9 */
263	"FLUSH CACHE EXT", /* 0xea */
264	"", /* 0xeb */
265	"IDENTIFY DEVICE", /* 0xec */
266	"MEDIA EJECT", /* 0xed */
267	"IDENTIFY DMA", /* 0xee */
268	"SET FEATURES", /* 0xef */
269	"", /* 0xf0 */
270	"SECURITY SET PASSWORD", /* 0xf1 */
271	"SECURITY UNLOCK", /* 0xf2 */
272	"SECURITY ERASE PREPARE", /* 0xf3 */
273	"SECURITY ERASE UNIT", /* 0xf4 */
274	"SECURITY FREEZE LOCK", /* 0xf5 */
275	"SECURITY DISABLE PASSWORD", /* 0xf6 */
276	"", /* 0xf7 */
277	"READ NATIVE MAX ADDRESS", /* 0xf8 */
278	"SET MAX", /* 0xf9 */
279	"", /* 0xfa */
280	"", /* 0xfb */
281	"", /* 0xfc */
282	"", /* 0xfd */
283	"", /* 0xfe */
284	"" /* 0xff */
285	};
286
287	/**
288	* SCSI command codes.
289	*/
290	static const char * const g_apszSCSICmdNames[256] =
291	{
292	"TEST UNIT READY", /* 0x00 */
293	"REZERO UNIT", /* 0x01 */
294	"", /* 0x02 */
295	"REQUEST SENSE", /* 0x03 */
296	"FORMAT UNIT", /* 0x04 */
297	"READ BLOCK LIMITS", /* 0x05 */
298	"", /* 0x06 */
299	"REASSIGN BLOCKS", /* 0x07 */
300	"READ (6)", /* 0x08 */
301	"", /* 0x09 */
302	"WRITE (6)", /* 0x0a */
303	"SEEK (6)", /* 0x0b */
304	"", /* 0x0c */
305	"", /* 0x0d */
306	"", /* 0x0e */
307	"READ REVERSE (6)", /* 0x0f */
308	"READ FILEMARKS (6)", /* 0x10 */
309	"SPACE (6)", /* 0x11 */
310	"INQUIRY", /* 0x12 */
311	"VERIFY (6)", /* 0x13 */
312	"RECOVER BUFFERED DATA", /* 0x14 */
313	"MODE SELECT (6)", /* 0x15 */
314	"RESERVE (6)", /* 0x16 */
315	"RELEASE (6)", /* 0x17 */
316	"COPY", /* 0x18 */
317	"ERASE (6)", /* 0x19 */
318	"MODE SENSE (6)", /* 0x1a */
319	"START STOP UNIT", /* 0x1b */
320	"RECEIVE DIAGNOSTIC RESULTS", /* 0x1c */
321	"SEND DIAGNOSTIC", /* 0x1d */
322	"PREVENT ALLOW MEDIUM REMOVAL", /* 0x1e */
323	"", /* 0x1f */
324	"", /* 0x20 */
325	"", /* 0x21 */
326	"", /* 0x22 */
327	"READ FORMAT CAPACITIES", /* 0x23 */
328	"SET WINDOW", /* 0x24 */
329	"READ CAPACITY", /* 0x25 */
330	"", /* 0x26 */
331	"", /* 0x27 */
332	"READ (10)", /* 0x28 */
333	"READ GENERATION", /* 0x29 */
334	"WRITE (10)", /* 0x2a */
335	"SEEK (10)", /* 0x2b */
336	"ERASE (10)", /* 0x2c */
337	"READ UPDATED BLOCK", /* 0x2d */
338	"WRITE AND VERIFY (10)", /* 0x2e */
339	"VERIFY (10)", /* 0x2f */
340	"SEARCH DATA HIGH (10)", /* 0x30 */
341	"SEARCH DATA EQUAL (10)", /* 0x31 */
342	"SEARCH DATA LOW (10)", /* 0x32 */
343	"SET LIMITS (10)", /* 0x33 */
344	"PRE-FETCH (10)", /* 0x34 */
345	"SYNCHRONIZE CACHE (10)", /* 0x35 */
346	"LOCK UNLOCK CACHE (10)", /* 0x36 */
347	"READ DEFECT DATA (10)", /* 0x37 */
348	"MEDIUM SCAN", /* 0x38 */
349	"COMPARE", /* 0x39 */
350	"COPY AND VERIFY", /* 0x3a */
351	"WRITE BUFFER", /* 0x3b */
352	"READ BUFFER", /* 0x3c */
353	"UPDATE BLOCK", /* 0x3d */
354	"READ LONG (10)", /* 0x3e */
355	"WRITE LONG (10)", /* 0x3f */
356	"CHANGE DEFINITION", /* 0x40 */
357	"WRITE SAME (10)", /* 0x41 */
358	"READ SUBCHANNEL", /* 0x42 */
359	"READ TOC/PMA/ATIP", /* 0x43 */
360	"REPORT DENSITY SUPPORT", /* 0x44 */
361	"PLAY AUDIO (10)", /* 0x45 */
362	"GET CONFIGURATION", /* 0x46 */
363	"PLAY AUDIO MSF", /* 0x47 */
364	"", /* 0x48 */
365	"", /* 0x49 */
366	"GET EVENT STATUS NOTIFICATION", /* 0x4a */
367	"PAUSE/RESUME", /* 0x4b */
368	"LOG SELECT", /* 0x4c */
369	"LOG SENSE", /* 0x4d */
370	"STOP PLAY/SCAN", /* 0x4e */
371	"", /* 0x4f */
372	"XDWRITE (10)", /* 0x50 */
373	"READ DISC INFORMATION", /* 0x51 */
374	"READ TRACK INFORMATION", /* 0x52 */
375	"RESERVE TRACK", /* 0x53 */
376	"SEND OPC INFORMATION", /* 0x54 */
377	"MODE SELECT (10)", /* 0x55 */
378	"RESERVE (10)", /* 0x56 */
379	"RELEASE (10)", /* 0x57 */
380	"REPAIR TRACK", /* 0x58 */
381	"", /* 0x59 */
382	"MODE SENSE (10)", /* 0x5a */
383	"CLOSE TRACK/SESSION", /* 0x5b */
384	"READ BUFFER CAPACITY", /* 0x5c */
385	"SEND CUE SHEET", /* 0x5d */
386	"PERSISTENT RESERVE IN", /* 0x5e */
387	"PERSISTENT RESERVE OUT", /* 0x5f */
388	"", /* 0x60 */
389	"", /* 0x61 */
390	"", /* 0x62 */
391	"", /* 0x63 */
392	"", /* 0x64 */
393	"", /* 0x65 */
394	"", /* 0x66 */
395	"", /* 0x67 */
396	"", /* 0x68 */
397	"", /* 0x69 */
398	"", /* 0x6a */
399	"", /* 0x6b */
400	"", /* 0x6c */
401	"", /* 0x6d */
402	"", /* 0x6e */
403	"", /* 0x6f */
404	"", /* 0x70 */
405	"", /* 0x71 */
406	"", /* 0x72 */
407	"", /* 0x73 */
408	"", /* 0x74 */
409	"", /* 0x75 */
410	"", /* 0x76 */
411	"", /* 0x77 */
412	"", /* 0x78 */
413	"", /* 0x79 */
414	"", /* 0x7a */
415	"", /* 0x7b */
416	"", /* 0x7c */
417	"", /* 0x7d */
418	"", /* 0x7e */
419	"", /* 0x7f */
420	"WRITE FILEMARKS (16)", /* 0x80 */
421	"READ REVERSE (16)", /* 0x81 */
422	"REGENERATE (16)", /* 0x82 */
423	"EXTENDED COPY", /* 0x83 */
424	"RECEIVE COPY RESULTS", /* 0x84 */
425	"ATA COMMAND PASS THROUGH (16)", /* 0x85 */
426	"ACCESS CONTROL IN", /* 0x86 */
427	"ACCESS CONTROL OUT", /* 0x87 */
428	"READ (16)", /* 0x88 */
429	"", /* 0x89 */
430	"WRITE(16)", /* 0x8a */
431	"", /* 0x8b */
432	"READ ATTRIBUTE", /* 0x8c */
433	"WRITE ATTRIBUTE", /* 0x8d */
434	"WRITE AND VERIFY (16)", /* 0x8e */
435	"VERIFY (16)", /* 0x8f */
436	"PRE-FETCH (16)", /* 0x90 */
437	"SYNCHRONIZE CACHE (16)", /* 0x91 */
438	"LOCK UNLOCK CACHE (16)", /* 0x92 */
439	"WRITE SAME (16)", /* 0x93 */
440	"", /* 0x94 */
441	"", /* 0x95 */
442	"", /* 0x96 */
443	"", /* 0x97 */
444	"", /* 0x98 */
445	"", /* 0x99 */
446	"", /* 0x9a */
447	"", /* 0x9b */
448	"", /* 0x9c */
449	"", /* 0x9d */
450	"SERVICE ACTION IN (16)", /* 0x9e */
451	"SERVICE ACTION OUT (16)", /* 0x9f */
452	"REPORT LUNS", /* 0xa0 */
453	"BLANK", /* 0xa1 */
454	"SEND EVENT", /* 0xa2 */
455	"SEND KEY", /* 0xa3 */
456	"REPORT KEY", /* 0xa4 */
457	"PLAY AUDIO (12)", /* 0xa5 */
458	"LOAD/UNLOAD MEDIUM", /* 0xa6 */
459	"SET READ AHEAD", /* 0xa7 */
460	"READ (12)", /* 0xa8 */
461	"SERVICE ACTION OUT (12)", /* 0xa9 */
462	"WRITE (12)", /* 0xaa */
463	"SERVICE ACTION IN (12)", /* 0xab */
464	"GET PERFORMANCE", /* 0xac */
465	"READ DVD STRUCTURE", /* 0xad */
466	"WRITE AND VERIFY (12)", /* 0xae */
467	"VERIFY (12)", /* 0xaf */
468	"SEARCH DATA HIGH (12)", /* 0xb0 */
469	"SEARCH DATA EQUAL (12)", /* 0xb1 */
470	"SEARCH DATA LOW (12)", /* 0xb2 */
471	"SET LIMITS (12)", /* 0xb3 */
472	"READ ELEMENT STATUS ATTACHED", /* 0xb4 */
473	"REQUEST VOLUME ELEMENT ADDRESS", /* 0xb5 */
474	"SET STREAMING", /* 0xb6 */
475	"READ DEFECT DATA (12)", /* 0xb7 */
476	"READ ELEMENT STATUS", /* 0xb8 */
477	"READ CD MSF", /* 0xb9 */
478	"SCAN", /* 0xba */
479	"SET CD SPEED", /* 0xbb */
480	"SPARE (IN)", /* 0xbc */
481	"MECHANISM STATUS", /* 0xbd */
482	"READ CD", /* 0xbe */
483	"SEND DVD STRUCTURE", /* 0xbf */
484	"", /* 0xc0 */
485	"", /* 0xc1 */
486	"", /* 0xc2 */
487	"", /* 0xc3 */
488	"", /* 0xc4 */
489	"", /* 0xc5 */
490	"", /* 0xc6 */
491	"", /* 0xc7 */
492	"", /* 0xc8 */
493	"", /* 0xc9 */
494	"", /* 0xca */
495	"", /* 0xcb */
496	"", /* 0xcc */
497	"", /* 0xcd */
498	"", /* 0xce */
499	"", /* 0xcf */
500	"", /* 0xd0 */
501	"", /* 0xd1 */
502	"", /* 0xd2 */
503	"", /* 0xd3 */
504	"", /* 0xd4 */
505	"", /* 0xd5 */
506	"", /* 0xd6 */
507	"", /* 0xd7 */
508	"", /* 0xd8 */
509	"", /* 0xd9 */
510	"", /* 0xda */
511	"", /* 0xdb */
512	"", /* 0xdc */
513	"", /* 0xdd */
514	"", /* 0xde */
515	"", /* 0xdf */
516	"", /* 0xe0 */
517	"", /* 0xe1 */
518	"", /* 0xe2 */
519	"", /* 0xe3 */
520	"", /* 0xe4 */
521	"", /* 0xe5 */
522	"", /* 0xe6 */
523	"", /* 0xe7 */
524	"", /* 0xe8 */
525	"", /* 0xe9 */
526	"", /* 0xea */
527	"", /* 0xeb */
528	"", /* 0xec */
529	"", /* 0xed */
530	"", /* 0xee */
531	"", /* 0xef */
532	"", /* 0xf0 */
533	"", /* 0xf1 */
534	"", /* 0xf2 */
535	"", /* 0xf3 */
536	"", /* 0xf4 */
537	"", /* 0xf5 */
538	"", /* 0xf6 */
539	"", /* 0xf7 */
540	"", /* 0xf8 */
541	"", /* 0xf9 */
542	"", /* 0xfa */
543	"", /* 0xfb */
544	"", /* 0xfc */
545	"", /* 0xfd */
546	"", /* 0xfe */
547	"" /* 0xff */
548	};
549
550	static const char * const g_apszSCSISenseNames[] =
551	{
552	"NO SENSE",
553	"RECOVERED ERROR",
554	"NOT READY",
555	"MEDIUM ERROR",
556	"HARDWARE ERROR",
557	"ILLEGAL REQUEST",
558	"UNIT ATTENTION",
559	"DATA PROTECT",
560	"BLANK CHECK",
561	"VENDOR-SPECIFIC",
562	"COPY ABORTED",
563	"ABORTED COMMAND",
564	"(obsolete)",
565	"VOLUME OVERFLOW",
566	"MISCOMPARE",
567	"(reserved)"
568	};
569
570	/**
571	* SCSI Sense text
572	*/
573	static struct
574	{
575	uint8_t uASC;
576	uint8_t uASCQ;
577	const char * const pszSenseText;
578	} g_aSCSISenseText[]
579	=
580	{
581	{ 0x67, 0x02, "A ADD LOGICAL UNIT FAILED" },
582	{ 0x13, 0x00, "ADDRESS MARK NOT FOUND FOR DATA FIELD" },
583	{ 0x12, 0x00, "ADDRESS MARK NOT FOUND FOR ID FIELD" },
584	{ 0x27, 0x03, "ASSOCIATED WRITE PROTECT" },
585	{ 0x67, 0x06, "ATTACHMENT OF LOGICAL UNIT FAILED" },
586	{ 0x00, 0x11, "AUDIO PLAY OPERATION IN PROGRESS" },
587	{ 0x00, 0x12, "AUDIO PLAY OPERATION PAUSED" },
588	{ 0x00, 0x14, "AUDIO PLAY OPERATION STOPPED DUE TO ERROR" },
589	{ 0x00, 0x13, "AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED" },
590	{ 0x66, 0x00, "AUTOMATIC DOCUMENT FEEDER COVER UP" },
591	{ 0x66, 0x01, "AUTOMATIC DOCUMENT FEEDER LIFT UP" },
592	{ 0x00, 0x04, "BEGINNING-OF-PARTITION/MEDIUM DETECTED" },
593	{ 0x0C, 0x06, "BLOCK NOT COMPRESSIBLE" },
594	{ 0x14, 0x04, "BLOCK SEQUENCE ERROR" },
595	{ 0x29, 0x03, "BUS DEVICE RESET FUNCTION OCCURRED" },
596	{ 0x11, 0x0E, "CANNOT DECOMPRESS USING DECLARED ALGORITHM" },
597	{ 0x30, 0x06, "CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM" },
598	{ 0x30, 0x02, "CANNOT READ MEDIUM - INCOMPATIBLE FORMAT" },
599	{ 0x30, 0x01, "CANNOT READ MEDIUM - UNKNOWN FORMAT" },
600	{ 0x30, 0x08, "CANNOT WRITE - APPLICATION CODE MISMATCH" },
601	{ 0x30, 0x05, "CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT" },
602	{ 0x30, 0x04, "CANNOT WRITE MEDIUM - UNKNOWN FORMAT" },
603	{ 0x52, 0x00, "CARTRIDGE FAULT" },
604	{ 0x73, 0x00, "CD CONTROL ERROR" },
605	{ 0x3F, 0x02, "CHANGED OPERATING DEFINITION" },
606	{ 0x11, 0x06, "CIRC UNRECOVERED ERROR" },
607	{ 0x30, 0x03, "CLEANING CARTRIDGE INSTALLED" },
608	{ 0x30, 0x07, "CLEANING FAILURE" },
609	{ 0x00, 0x17, "CLEANING REQUESTED" },
610	{ 0x4A, 0x00, "COMMAND PHASE ERROR" },
611	{ 0x2C, 0x00, "COMMAND SEQUENCE ERROR" },
612	{ 0x6E, 0x00, "COMMAND TO LOGICAL UNIT FAILED" },
613	{ 0x2F, 0x00, "COMMANDS CLEARED BY ANOTHER INITIATOR" },
614	{ 0x0C, 0x04, "COMPRESSION CHECK MISCOMPARE ERROR" },
615	{ 0x67, 0x00, "CONFIGURATION FAILURE" },
616	{ 0x67, 0x01, "CONFIGURATION OF INCAPABLE LOGICAL UNITS FAILED" },
617	{ 0x2B, 0x00, "COPY CANNOT EXECUTE SINCE HOST CANNOT DISCONNECT" },
618	{ 0x67, 0x07, "CREATION OF LOGICAL UNIT FAILED" },
619	{ 0x2C, 0x04, "CURRENT PROGRAM AREA IS EMPTY" },
620	{ 0x2C, 0x03, "CURRENT PROGRAM AREA IS NOT EMPTY" },
621	{ 0x30, 0x09, "CURRENT SESSION NOT FIXATED FOR APPEND" },
622	{ 0x0C, 0x05, "DATA EXPANSION OCCURRED DURING COMPRESSION" },
623	{ 0x69, 0x00, "DATA LOSS ON LOGICAL UNIT" },
624	{ 0x41, 0x00, "DATA PATH FAILURE (SHOULD USE 40 NN)" },
625	{ 0x4B, 0x00, "DATA PHASE ERROR" },
626	{ 0x11, 0x07, "DATA RE-SYNCHRONIZATION ERROR" },
627	{ 0x16, 0x03, "DATA SYNC ERROR - DATA AUTO-REALLOCATED" },
628	{ 0x16, 0x01, "DATA SYNC ERROR - DATA REWRITTEN" },
629	{ 0x16, 0x04, "DATA SYNC ERROR - RECOMMEND REASSIGNMENT" },
630	{ 0x16, 0x02, "DATA SYNC ERROR - RECOMMEND REWRITE" },
631	{ 0x16, 0x00, "DATA SYNCHRONIZATION MARK ERROR" },
632	{ 0x11, 0x0D, "DE-COMPRESSION CRC ERROR" },
633	{ 0x71, 0x00, "DECOMPRESSION EXCEPTION LONG ALGORITHM ID" },
634	{ 0x70, 0xFF, "DECOMPRESSION EXCEPTION SHORT ALGORITHM ID OF NN" },
635	{ 0x19, 0x00, "DEFECT LIST ERROR" },
636	{ 0x19, 0x03, "DEFECT LIST ERROR IN GROWN LIST" },
637	{ 0x19, 0x02, "DEFECT LIST ERROR IN PRIMARY LIST" },
638	{ 0x19, 0x01, "DEFECT LIST NOT AVAILABLE" },
639	{ 0x1C, 0x00, "DEFECT LIST NOT FOUND" },
640	{ 0x32, 0x01, "DEFECT LIST UPDATE FAILURE" },
641	{ 0x29, 0x04, "DEVICE INTERNAL RESET" },
642	{ 0x40, 0xFF, "DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)" },
643	{ 0x66, 0x02, "DOCUMENT JAM IN AUTOMATIC DOCUMENT FEEDER" },
644	{ 0x66, 0x03, "DOCUMENT MISS FEED AUTOMATIC IN DOCUMENT FEEDER" },
645	{ 0x72, 0x04, "EMPTY OR PARTIALLY WRITTEN RESERVED TRACK" },
646	{ 0x34, 0x00, "ENCLOSURE FAILURE" },
647	{ 0x35, 0x00, "ENCLOSURE SERVICES FAILURE" },
648	{ 0x35, 0x03, "ENCLOSURE SERVICES TRANSFER FAILURE" },
649	{ 0x35, 0x04, "ENCLOSURE SERVICES TRANSFER REFUSED" },
650	{ 0x35, 0x02, "ENCLOSURE SERVICES UNAVAILABLE" },
651	{ 0x3B, 0x0F, "END OF MEDIUM REACHED" },
652	{ 0x63, 0x00, "END OF USER AREA ENCOUNTERED ON THIS TRACK" },
653	{ 0x00, 0x05, "END-OF-DATA DETECTED" },
654	{ 0x14, 0x03, "END-OF-DATA NOT FOUND" },
655	{ 0x00, 0x02, "END-OF-PARTITION/MEDIUM DETECTED" },
656	{ 0x51, 0x00, "ERASE FAILURE" },
657	{ 0x0A, 0x00, "ERROR LOG OVERFLOW" },
658	{ 0x11, 0x10, "ERROR READING ISRC NUMBER" },
659	{ 0x11, 0x0F, "ERROR READING UPC/EAN NUMBER" },
660	{ 0x11, 0x02, "ERROR TOO LONG TO CORRECT" },
661	{ 0x03, 0x02, "EXCESSIVE WRITE ERRORS" },
662	{ 0x67, 0x04, "EXCHANGE OF LOGICAL UNIT FAILED" },
663	{ 0x3B, 0x07, "FAILED TO SENSE BOTTOM-OF-FORM" },
664	{ 0x3B, 0x06, "FAILED TO SENSE TOP-OF-FORM" },
665	{ 0x5D, 0x00, "FAILURE PREDICTION THRESHOLD EXCEEDED" },
666	{ 0x5D, 0xFF, "FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)" },
667	{ 0x00, 0x01, "FILEMARK DETECTED" },
668	{ 0x14, 0x02, "FILEMARK OR SETMARK NOT FOUND" },
669	{ 0x09, 0x02, "FOCUS SERVO FAILURE" },
670	{ 0x31, 0x01, "FORMAT COMMAND FAILED" },
671	{ 0x58, 0x00, "GENERATION DOES NOT EXIST" },
672	{ 0x1C, 0x02, "GROWN DEFECT LIST NOT FOUND" },
673	{ 0x27, 0x01, "HARDWARE WRITE PROTECTED" },
674	{ 0x09, 0x04, "HEAD SELECT FAULT" },
675	{ 0x00, 0x06, "I/O PROCESS TERMINATED" },
676	{ 0x10, 0x00, "ID CRC OR ECC ERROR" },
677	{ 0x5E, 0x03, "IDLE CONDITION ACTIVATED BY COMMAND" },
678	{ 0x5E, 0x01, "IDLE CONDITION ACTIVATED BY TIMER" },
679	{ 0x22, 0x00, "ILLEGAL FUNCTION (USE 20 00, 24 00, OR 26 00)" },
680	{ 0x64, 0x00, "ILLEGAL MODE FOR THIS TRACK" },
681	{ 0x28, 0x01, "IMPORT OR EXPORT ELEMENT ACCESSED" },
682	{ 0x30, 0x00, "INCOMPATIBLE MEDIUM INSTALLED" },
683	{ 0x11, 0x08, "INCOMPLETE BLOCK READ" },
684	{ 0x6A, 0x00, "INFORMATIONAL, REFER TO LOG" },
685	{ 0x48, 0x00, "INITIATOR DETECTED ERROR MESSAGE RECEIVED" },
686	{ 0x3F, 0x03, "INQUIRY DATA HAS CHANGED" },
687	{ 0x44, 0x00, "INTERNAL TARGET FAILURE" },
688	{ 0x3D, 0x00, "INVALID BITS IN IDENTIFY MESSAGE" },
689	{ 0x2C, 0x02, "INVALID COMBINATION OF WINDOWS SPECIFIED" },
690	{ 0x20, 0x00, "INVALID COMMAND OPERATION CODE" },
691	{ 0x21, 0x01, "INVALID ELEMENT ADDRESS" },
692	{ 0x24, 0x00, "INVALID FIELD IN CDB" },
693	{ 0x26, 0x00, "INVALID FIELD IN PARAMETER LIST" },
694	{ 0x49, 0x00, "INVALID MESSAGE ERROR" },
695	{ 0x64, 0x01, "INVALID PACKET SIZE" },
696	{ 0x26, 0x04, "INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION" },
697	{ 0x11, 0x05, "L-EC UNCORRECTABLE ERROR" },
698	{ 0x60, 0x00, "LAMP FAILURE" },
699	{ 0x5B, 0x02, "LOG COUNTER AT MAXIMUM" },
700	{ 0x5B, 0x00, "LOG EXCEPTION" },
701	{ 0x5B, 0x03, "LOG LIST CODES EXHAUSTED" },
702	{ 0x2A, 0x02, "LOG PARAMETERS CHANGED" },
703	{ 0x21, 0x00, "LOGICAL BLOCK ADDRESS OUT OF RANGE" },
704	{ 0x08, 0x03, "LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)" },
705	{ 0x08, 0x00, "LOGICAL UNIT COMMUNICATION FAILURE" },
706	{ 0x08, 0x02, "LOGICAL UNIT COMMUNICATION PARITY ERROR" },
707	{ 0x08, 0x01, "LOGICAL UNIT COMMUNICATION TIME-OUT" },
708	{ 0x05, 0x00, "LOGICAL UNIT DOES NOT RESPOND TO SELECTION" },
709	{ 0x4C, 0x00, "LOGICAL UNIT FAILED SELF-CONFIGURATION" },
710	{ 0x3E, 0x01, "LOGICAL UNIT FAILURE" },
711	{ 0x3E, 0x00, "LOGICAL UNIT HAS NOT SELF-CONFIGURED YET" },
712	{ 0x04, 0x01, "LOGICAL UNIT IS IN PROCESS OF BECOMING READY" },
713	{ 0x68, 0x00, "LOGICAL UNIT NOT CONFIGURED" },
714	{ 0x04, 0x00, "LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE" },
715	{ 0x04, 0x04, "LOGICAL UNIT NOT READY, FORMAT IN PROGRESS" },
716	{ 0x04, 0x02, "LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED" },
717	{ 0x04, 0x08, "LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS" },
718	{ 0x04, 0x03, "LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED" },
719	{ 0x04, 0x07, "LOGICAL UNIT NOT READY, OPERATION IN PROGRESS" },
720	{ 0x04, 0x05, "LOGICAL UNIT NOT READY, REBUILD IN PROGRESS" },
721	{ 0x04, 0x06, "LOGICAL UNIT NOT READY, RECALCULATION IN PROGRESS" },
722	{ 0x25, 0x00, "LOGICAL UNIT NOT SUPPORTED" },
723	{ 0x27, 0x02, "LOGICAL UNIT SOFTWARE WRITE PROTECTED" },
724	{ 0x5E, 0x00, "LOW POWER CONDITION ON" },
725	{ 0x15, 0x01, "MECHANICAL POSITIONING ERROR" },
726	{ 0x53, 0x00, "MEDIA LOAD OR EJECT FAILED" },
727	{ 0x3B, 0x0D, "MEDIUM DESTINATION ELEMENT FULL" },
728	{ 0x31, 0x00, "MEDIUM FORMAT CORRUPTED" },
729	{ 0x3B, 0x13, "MEDIUM MAGAZINE INSERTED" },
730	{ 0x3B, 0x14, "MEDIUM MAGAZINE LOCKED" },
731	{ 0x3B, 0x11, "MEDIUM MAGAZINE NOT ACCESSIBLE" },
732	{ 0x3B, 0x12, "MEDIUM MAGAZINE REMOVED" },
733	{ 0x3B, 0x15, "MEDIUM MAGAZINE UNLOCKED" },
734	{ 0x3A, 0x00, "MEDIUM NOT PRESENT" },
735	{ 0x3A, 0x01, "MEDIUM NOT PRESENT - TRAY CLOSED" },
736	{ 0x3A, 0x02, "MEDIUM NOT PRESENT - TRAY OPEN" },
737	{ 0x53, 0x02, "MEDIUM REMOVAL PREVENTED" },
738	{ 0x3B, 0x0E, "MEDIUM SOURCE ELEMENT EMPTY" },
739	{ 0x43, 0x00, "MESSAGE ERROR" },
740	{ 0x3F, 0x01, "MICROCODE HAS BEEN CHANGED" },
741	{ 0x1D, 0x00, "MISCOMPARE DURING VERIFY OPERATION" },
742	{ 0x11, 0x0A, "MISCORRECTED ERROR" },
743	{ 0x2A, 0x01, "MODE PARAMETERS CHANGED" },
744	{ 0x67, 0x03, "MODIFICATION OF LOGICAL UNIT FAILED" },
745	{ 0x69, 0x01, "MULTIPLE LOGICAL UNIT FAILURES" },
746	{ 0x07, 0x00, "MULTIPLE PERIPHERAL DEVICES SELECTED" },
747	{ 0x11, 0x03, "MULTIPLE READ ERRORS" },
748	{ 0x00, 0x00, "NO ADDITIONAL SENSE INFORMATION" },
749	{ 0x00, 0x15, "NO CURRENT AUDIO STATUS TO RETURN" },
750	{ 0x32, 0x00, "NO DEFECT SPARE LOCATION AVAILABLE" },
751	{ 0x11, 0x09, "NO GAP FOUND" },
752	{ 0x01, 0x00, "NO INDEX/SECTOR SIGNAL" },
753	{ 0x06, 0x00, "NO REFERENCE POSITION FOUND" },
754	{ 0x02, 0x00, "NO SEEK COMPLETE" },
755	{ 0x03, 0x01, "NO WRITE CURRENT" },
756	{ 0x28, 0x00, "NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED" },
757	{ 0x00, 0x16, "OPERATION IN PROGRESS" },
758	{ 0x5A, 0x01, "OPERATOR MEDIUM REMOVAL REQUEST" },
759	{ 0x5A, 0x00, "OPERATOR REQUEST OR STATE CHANGE INPUT" },
760	{ 0x5A, 0x03, "OPERATOR SELECTED WRITE PERMIT" },
761	{ 0x5A, 0x02, "OPERATOR SELECTED WRITE PROTECT" },
762	{ 0x61, 0x02, "OUT OF FOCUS" },
763	{ 0x4E, 0x00, "OVERLAPPED COMMANDS ATTEMPTED" },
764	{ 0x2D, 0x00, "OVERWRITE ERROR ON UPDATE IN PLACE" },
765	{ 0x63, 0x01, "PACKET DOES NOT FIT IN AVAILABLE SPACE" },
766	{ 0x3B, 0x05, "PAPER JAM" },
767	{ 0x1A, 0x00, "PARAMETER LIST LENGTH ERROR" },
768	{ 0x26, 0x01, "PARAMETER NOT SUPPORTED" },
769	{ 0x26, 0x02, "PARAMETER VALUE INVALID" },
770	{ 0x2A, 0x00, "PARAMETERS CHANGED" },
771	{ 0x69, 0x02, "PARITY/DATA MISMATCH" },
772	{ 0x1F, 0x00, "PARTIAL DEFECT LIST TRANSFER" },
773	{ 0x03, 0x00, "PERIPHERAL DEVICE WRITE FAULT" },
774	{ 0x27, 0x05, "PERMANENT WRITE PROTECT" },
775	{ 0x27, 0x04, "PERSISTENT WRITE PROTECT" },
776	{ 0x50, 0x02, "POSITION ERROR RELATED TO TIMING" },
777	{ 0x3B, 0x0C, "POSITION PAST BEGINNING OF MEDIUM" },
778	{ 0x3B, 0x0B, "POSITION PAST END OF MEDIUM" },
779	{ 0x15, 0x02, "POSITIONING ERROR DETECTED BY READ OF MEDIUM" },
780	{ 0x73, 0x01, "POWER CALIBRATION AREA ALMOST FULL" },
781	{ 0x73, 0x03, "POWER CALIBRATION AREA ERROR" },
782	{ 0x73, 0x02, "POWER CALIBRATION AREA IS FULL" },
783	{ 0x29, 0x01, "POWER ON OCCURRED" },
784	{ 0x29, 0x00, "POWER ON, RESET, OR BUS DEVICE RESET OCCURRED" },
785	{ 0x42, 0x00, "POWER-ON OR SELF-TEST FAILURE (SHOULD USE 40 NN)" },
786	{ 0x1C, 0x01, "PRIMARY DEFECT LIST NOT FOUND" },
787	{ 0x73, 0x05, "PROGRAM MEMORY AREA IS FULL" },
788	{ 0x73, 0x04, "PROGRAM MEMORY AREA UPDATE FAILURE" },
789	{ 0x40, 0x00, "RAM FAILURE (SHOULD USE 40 NN)" },
790	{ 0x15, 0x00, "RANDOM POSITIONING ERROR" },
791	{ 0x11, 0x11, "READ ERROR - LOSS OF STREAMING" },
792	{ 0x3B, 0x0A, "READ PAST BEGINNING OF MEDIUM" },
793	{ 0x3B, 0x09, "READ PAST END OF MEDIUM" },
794	{ 0x11, 0x01, "READ RETRIES EXHAUSTED" },
795	{ 0x6C, 0x00, "REBUILD FAILURE OCCURRED" },
796	{ 0x6D, 0x00, "RECALCULATE FAILURE OCCURRED" },
797	{ 0x14, 0x01, "RECORD NOT FOUND" },
798	{ 0x14, 0x06, "RECORD NOT FOUND - DATA AUTO-REALLOCATED" },
799	{ 0x14, 0x05, "RECORD NOT FOUND - RECOMMEND REASSIGNMENT" },
800	{ 0x14, 0x00, "RECORDED ENTITY NOT FOUND" },
801	{ 0x18, 0x02, "RECOVERED DATA - DATA AUTO-REALLOCATED" },
802	{ 0x18, 0x05, "RECOVERED DATA - RECOMMEND REASSIGNMENT" },
803	{ 0x18, 0x06, "RECOVERED DATA - RECOMMEND REWRITE" },
804	{ 0x17, 0x05, "RECOVERED DATA USING PREVIOUS SECTOR ID" },
805	{ 0x18, 0x03, "RECOVERED DATA WITH CIRC" },
806	{ 0x18, 0x07, "RECOVERED DATA WITH ECC - DATA REWRITTEN" },
807	{ 0x18, 0x01, "RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED" },
808	{ 0x18, 0x00, "RECOVERED DATA WITH ERROR CORRECTION APPLIED" },
809	{ 0x18, 0x04, "RECOVERED DATA WITH L-EC" },
810	{ 0x17, 0x03, "RECOVERED DATA WITH NEGATIVE HEAD OFFSET" },
811	{ 0x17, 0x00, "RECOVERED DATA WITH NO ERROR CORRECTION APPLIED" },
812	{ 0x17, 0x02, "RECOVERED DATA WITH POSITIVE HEAD OFFSET" },
813	{ 0x17, 0x01, "RECOVERED DATA WITH RETRIES" },
814	{ 0x17, 0x04, "RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED" },
815	{ 0x17, 0x06, "RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED" },
816	{ 0x17, 0x09, "RECOVERED DATA WITHOUT ECC - DATA REWRITTEN" },
817	{ 0x17, 0x07, "RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT" },
818	{ 0x17, 0x08, "RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE" },
819	{ 0x1E, 0x00, "RECOVERED ID WITH ECC CORRECTION" },
820	{ 0x6B, 0x01, "REDUNDANCY LEVEL GOT BETTER" },
821	{ 0x6B, 0x02, "REDUNDANCY LEVEL GOT WORSE" },
822	{ 0x67, 0x05, "REMOVE OF LOGICAL UNIT FAILED" },
823	{ 0x3B, 0x08, "REPOSITION ERROR" },
824	{ 0x2A, 0x03, "RESERVATIONS PREEMPTED" },
825	{ 0x36, 0x00, "RIBBON, INK, OR TONER FAILURE" },
826	{ 0x37, 0x00, "ROUNDED PARAMETER" },
827	{ 0x5C, 0x00, "RPL STATUS CHANGE" },
828	{ 0x39, 0x00, "SAVING PARAMETERS NOT SUPPORTED" },
829	{ 0x62, 0x00, "SCAN HEAD POSITIONING ERROR" },
830	{ 0x29, 0x02, "SCSI BUS RESET OCCURRED" },
831	{ 0x47, 0x00, "SCSI PARITY ERROR" },
832	{ 0x54, 0x00, "SCSI TO HOST SYSTEM INTERFACE FAILURE" },
833	{ 0x45, 0x00, "SELECT OR RESELECT FAILURE" },
834	{ 0x3B, 0x00, "SEQUENTIAL POSITIONING ERROR" },
835	{ 0x72, 0x00, "SESSION FIXATION ERROR" },
836	{ 0x72, 0x03, "SESSION FIXATION ERROR - INCOMPLETE TRACK IN SESSION" },
837	{ 0x72, 0x01, "SESSION FIXATION ERROR WRITING LEAD-IN" },
838	{ 0x72, 0x02, "SESSION FIXATION ERROR WRITING LEAD-OUT" },
839	{ 0x00, 0x03, "SETMARK DETECTED" },
840	{ 0x3B, 0x04, "SLEW FAILURE" },
841	{ 0x09, 0x03, "SPINDLE SERVO FAILURE" },
842	{ 0x5C, 0x02, "SPINDLES NOT SYNCHRONIZED" },
843	{ 0x5C, 0x01, "SPINDLES SYNCHRONIZED" },
844	{ 0x5E, 0x04, "STANDBY CONDITION ACTIVATED BY COMMAND" },
845	{ 0x5E, 0x02, "STANDBY CONDITION ACTIVATED BY TIMER" },
846	{ 0x6B, 0x00, "STATE CHANGE HAS OCCURRED" },
847	{ 0x1B, 0x00, "SYNCHRONOUS DATA TRANSFER ERROR" },
848	{ 0x55, 0x01, "SYSTEM BUFFER FULL" },
849	{ 0x55, 0x00, "SYSTEM RESOURCE FAILURE" },
850	{ 0x4D, 0xFF, "TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG)" },
851	{ 0x33, 0x00, "TAPE LENGTH ERROR" },
852	{ 0x3B, 0x03, "TAPE OR ELECTRONIC VERTICAL FORMS UNIT NOT READY" },
853	{ 0x3B, 0x01, "TAPE POSITION ERROR AT BEGINNING-OF-MEDIUM" },
854	{ 0x3B, 0x02, "TAPE POSITION ERROR AT END-OF-MEDIUM" },
855	{ 0x3F, 0x00, "TARGET OPERATING CONDITIONS HAVE CHANGED" },
856	{ 0x5B, 0x01, "THRESHOLD CONDITION MET" },
857	{ 0x26, 0x03, "THRESHOLD PARAMETERS NOT SUPPORTED" },
858	{ 0x3E, 0x02, "TIMEOUT ON LOGICAL UNIT" },
859	{ 0x2C, 0x01, "TOO MANY WINDOWS SPECIFIED" },
860	{ 0x09, 0x00, "TRACK FOLLOWING ERROR" },
861	{ 0x09, 0x01, "TRACKING SERVO FAILURE" },
862	{ 0x61, 0x01, "UNABLE TO ACQUIRE VIDEO" },
863	{ 0x57, 0x00, "UNABLE TO RECOVER TABLE-OF-CONTENTS" },
864	{ 0x53, 0x01, "UNLOAD TAPE FAILURE" },
865	{ 0x11, 0x00, "UNRECOVERED READ ERROR" },
866	{ 0x11, 0x04, "UNRECOVERED READ ERROR - AUTO REALLOCATE FAILED" },
867	{ 0x11, 0x0B, "UNRECOVERED READ ERROR - RECOMMEND REASSIGNMENT" },
868	{ 0x11, 0x0C, "UNRECOVERED READ ERROR - RECOMMEND REWRITE THE DATA" },
869	{ 0x46, 0x00, "UNSUCCESSFUL SOFT RESET" },
870	{ 0x35, 0x01, "UNSUPPORTED ENCLOSURE FUNCTION" },
871	{ 0x59, 0x00, "UPDATED BLOCK READ" },
872	{ 0x61, 0x00, "VIDEO ACQUISITION ERROR" },
873	{ 0x65, 0x00, "VOLTAGE FAULT" },
874	{ 0x0B, 0x00, "WARNING" },
875	{ 0x0B, 0x02, "WARNING - ENCLOSURE DEGRADED" },
876	{ 0x0B, 0x01, "WARNING - SPECIFIED TEMPERATURE EXCEEDED" },
877	{ 0x50, 0x00, "WRITE APPEND ERROR" },
878	{ 0x50, 0x01, "WRITE APPEND POSITION ERROR" },
879	{ 0x0C, 0x00, "WRITE ERROR" },
880	{ 0x0C, 0x02, "WRITE ERROR - AUTO REALLOCATION FAILED" },
881	{ 0x0C, 0x09, "WRITE ERROR - LOSS OF STREAMING" },
882	{ 0x0C, 0x0A, "WRITE ERROR - PADDING BLOCKS ADDED" },
883	{ 0x0C, 0x03, "WRITE ERROR - RECOMMEND REASSIGNMENT" },
884	{ 0x0C, 0x01, "WRITE ERROR - RECOVERED WITH AUTO REALLOCATION" },
885	{ 0x0C, 0x08, "WRITE ERROR - RECOVERY FAILED" },
886	{ 0x0C, 0x07, "WRITE ERROR - RECOVERY NEEDED" },
887	{ 0x27, 0x00, "WRITE PROTECTED" },
888	};
889
890	/**
891	* Return the plain text of an ATA command for debugging purposes.
892	* Don't allocate the string as we use this function in Log() statements.
893	*/
894	const char * ATACmdText(uint8_t uCmd)
895	{
896	AssertCompile(RT_ELEMENTS(g_apszATACmdNames) == (1 << (8*sizeof(uCmd))));
897	return g_apszATACmdNames[uCmd];
898	}
899
900	/**
901	* Return the plain text of a SCSI command for debugging purposes.
902	* Don't allocate the string as we use this function in Log() statements.
903	*/
904	const char * SCSICmdText(uint8_t uCmd)
905	{
906	AssertCompile(RT_ELEMENTS(g_apszSCSICmdNames) == (1 << (8*sizeof(uCmd))));
907	return g_apszSCSICmdNames[uCmd];
908	}
909
910	/**
911	* Return the plain text of a SCSI sense code.
912	* Don't allocate the string as we use this function in Log() statements.
913	*/
914	const char * SCSISenseText(uint8_t uSense)
915	{
916	if (uSense < RT_ELEMENTS(g_apszSCSISenseNames))
917	return g_apszSCSISenseNames[uSense];
918
919	return "(SCSI sense out of range)";
920	}
921
922	/**
923	* Return the plain text of an extended SCSI sense key.
924	* Don't allocate the string as we use this function in Log() statements.
925	*/
926	const char * SCSISenseExtText(uint8_t uASC, uint8_t uASCQ)
927	{
928	unsigned iIdx;
929
930	/* Linear search. Doesn't hurt as we don't call this function very frequently */
931	for (iIdx = 0; iIdx < RT_ELEMENTS(g_aSCSISenseText); iIdx++)
932	{
933	if ( g_aSCSISenseText[iIdx].uASC == uASC
934	&& ( g_aSCSISenseText[iIdx].uASCQ == uASCQ
935	\|\| g_aSCSISenseText[iIdx].uASCQ == 0xff))
936	return g_aSCSISenseText[iIdx].pszSenseText;
937	}
938	return "(Unknown extended sense code)";
939	}

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Storage/Debug.cpp@ 40257

Download in other formats: