VirtualBox

source: vbox/trunk/src/VBox/Devices/Serial/UartCore.cpp@ 106401

Last change on this file since 106401 was 106061, checked in by vboxsync, 3 months ago

Copyright year updates by scm.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 76.2 KB
Line 
1/* $Id: UartCore.cpp 106061 2024-09-16 14:03:52Z vboxsync $ */
2/** @file
3 * UartCore - UART (16550A up to 16950) emulation.
4 *
5 * The documentation for this device was taken from the PC16550D spec from TI.
6 */
7
8/*
9 * Copyright (C) 2018-2024 Oracle and/or its affiliates.
10 *
11 * This file is part of VirtualBox base platform packages, as
12 * available from https://www.virtualbox.org.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * as published by the Free Software Foundation, in version 3 of the
17 * License.
18 *
19 * This program is distributed in the hope that it will be useful, but
20 * WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
22 * General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, see <https://www.gnu.org/licenses>.
26 *
27 * SPDX-License-Identifier: GPL-3.0-only
28 */
29
30
31/*********************************************************************************************************************************
32* Header Files *
33*********************************************************************************************************************************/
34#define LOG_GROUP LOG_GROUP_DEV_SERIAL
35#include <VBox/vmm/tm.h>
36#include <iprt/log.h>
37#include <iprt/uuid.h>
38#include <iprt/assert.h>
39
40#include "VBoxDD.h"
41#include "UartCore.h"
42
43
44/*********************************************************************************************************************************
45* Defined Constants And Macros *
46*********************************************************************************************************************************/
47
48/** The RBR/DLL register index (from the base of the port range). */
49#define UART_REG_RBR_DLL_INDEX 0
50
51/** The THR/DLL register index (from the base of the port range). */
52#define UART_REG_THR_DLL_INDEX 0
53
54/** The IER/DLM register index (from the base of the port range). */
55#define UART_REG_IER_DLM_INDEX 1
56/** Enable received data available interrupt */
57# define UART_REG_IER_ERBFI RT_BIT(0)
58/** Enable transmitter holding register empty interrupt */
59# define UART_REG_IER_ETBEI RT_BIT(1)
60/** Enable receiver line status interrupt */
61# define UART_REG_IER_ELSI RT_BIT(2)
62/** Enable modem status interrupt. */
63# define UART_REG_IER_EDSSI RT_BIT(3)
64/** Sleep mode enable. */
65# define UART_REG_IER_SLEEP_MODE_EN RT_BIT(4)
66/** Low power mode enable. */
67# define UART_REG_IER_LP_MODE_EN RT_BIT(5)
68/** Mask of writeable bits. */
69# define UART_REG_IER_MASK_WR 0x0f
70/** Mask of writeable bits for 16750+. */
71# define UART_REG_IER_MASK_WR_16750 0x3f
72
73/** The IIR register index (from the base of the port range). */
74#define UART_REG_IIR_INDEX 2
75/** Interrupt Pending - high means no interrupt pending. */
76# define UART_REG_IIR_IP_NO_INT RT_BIT(0)
77/** Interrupt identification mask. */
78# define UART_REG_IIR_ID_MASK 0x0e
79/** Sets the interrupt identification to the given value. */
80# define UART_REG_IIR_ID_SET(a_Val) (((a_Val) << 1) & UART_REG_IIR_ID_MASK)
81/** Gets the interrupt identification from the given IIR register value. */
82# define UART_REG_IIR_ID_GET(a_Val) (((a_Val) & UART_REG_IIR_ID_MASK) >> 1)
83/** Receiver Line Status interrupt. */
84# define UART_REG_IIR_ID_RCL 0x3
85/** Received Data Available interrupt. */
86# define UART_REG_IIR_ID_RDA 0x2
87/** Character Timeou Indicator interrupt. */
88# define UART_REG_IIR_ID_CTI 0x6
89/** Transmitter Holding Register Empty interrupt. */
90# define UART_REG_IIR_ID_THRE 0x1
91/** Modem Status interrupt. */
92# define UART_REG_IIR_ID_MS 0x0
93/** 64 byte FIFOs enabled (15750+ only). */
94# define UART_REG_IIR_64BYTE_FIFOS_EN RT_BIT(5)
95/** FIFOs enabled. */
96# define UART_REG_IIR_FIFOS_EN 0xc0
97/** Bits relevant for checking whether the interrupt status has changed. */
98# define UART_REG_IIR_CHANGED_MASK 0x0f
99
100/** The FCR register index (from the base of the port range). */
101#define UART_REG_FCR_INDEX 2
102/** Enable the TX/RX FIFOs. */
103# define UART_REG_FCR_FIFO_EN RT_BIT(0)
104/** Reset the receive FIFO. */
105# define UART_REG_FCR_RCV_FIFO_RST RT_BIT(1)
106/** Reset the transmit FIFO. */
107# define UART_REG_FCR_XMIT_FIFO_RST RT_BIT(2)
108/** DMA Mode Select. */
109# define UART_REG_FCR_DMA_MODE_SEL RT_BIT(3)
110/** 64 Byte FIFO enable (15750+ only). */
111# define UART_REG_FCR_64BYTE_FIFO_EN RT_BIT(5)
112/** Receiver level interrupt trigger. */
113# define UART_REG_FCR_RCV_LVL_IRQ_MASK 0xc0
114/** Returns the receive level trigger value from the given FCR register. */
115# define UART_REG_FCR_RCV_LVL_IRQ_GET(a_Fcr) (((a_Fcr) & UART_REG_FCR_RCV_LVL_IRQ_MASK) >> 6)
116/** RCV Interrupt trigger level - 1 byte. */
117# define UART_REG_FCR_RCV_LVL_IRQ_1 0x0
118/** RCV Interrupt trigger level - 4 bytes. */
119# define UART_REG_FCR_RCV_LVL_IRQ_4 0x1
120/** RCV Interrupt trigger level - 8 bytes. */
121# define UART_REG_FCR_RCV_LVL_IRQ_8 0x2
122/** RCV Interrupt trigger level - 14 bytes. */
123# define UART_REG_FCR_RCV_LVL_IRQ_14 0x3
124/** Mask of writeable bits. */
125# define UART_REG_FCR_MASK_WR 0xcf
126/** Mask of sticky bits. */
127# define UART_REG_FCR_MASK_STICKY 0xe9
128
129/** The LCR register index (from the base of the port range). */
130#define UART_REG_LCR_INDEX 3
131/** Word Length Select Mask. */
132# define UART_REG_LCR_WLS_MASK 0x3
133/** Returns the WLS value form the given LCR register value. */
134# define UART_REG_LCR_WLS_GET(a_Lcr) ((a_Lcr) & UART_REG_LCR_WLS_MASK)
135/** Number of stop bits. */
136# define UART_REG_LCR_STB RT_BIT(2)
137/** Parity Enable. */
138# define UART_REG_LCR_PEN RT_BIT(3)
139/** Even Parity. */
140# define UART_REG_LCR_EPS RT_BIT(4)
141/** Stick parity. */
142# define UART_REG_LCR_PAR_STICK RT_BIT(5)
143/** Set Break. */
144# define UART_REG_LCR_BRK_SET RT_BIT(6)
145/** Divisor Latch Access Bit. */
146# define UART_REG_LCR_DLAB RT_BIT(7)
147
148/** The MCR register index (from the base of the port range). */
149#define UART_REG_MCR_INDEX 4
150/** Data Terminal Ready. */
151# define UART_REG_MCR_DTR RT_BIT(0)
152/** Request To Send. */
153# define UART_REG_MCR_RTS RT_BIT(1)
154/** Out1. */
155# define UART_REG_MCR_OUT1 RT_BIT(2)
156/** Out2. */
157# define UART_REG_MCR_OUT2 RT_BIT(3)
158/** Loopback connection. */
159# define UART_REG_MCR_LOOP RT_BIT(4)
160/** Flow Control Enable (15750+ only). */
161# define UART_REG_MCR_AFE RT_BIT(5)
162/** Mask of writeable bits (15450 and 15550A). */
163# define UART_REG_MCR_MASK_WR 0x1f
164/** Mask of writeable bits (15750+). */
165# define UART_REG_MCR_MASK_WR_15750 0x3f
166
167/** The LSR register index (from the base of the port range). */
168#define UART_REG_LSR_INDEX 5
169/** Data Ready. */
170# define UART_REG_LSR_DR RT_BIT(0)
171/** Overrun Error. */
172# define UART_REG_LSR_OE RT_BIT(1)
173/** Parity Error. */
174# define UART_REG_LSR_PE RT_BIT(2)
175/** Framing Error. */
176# define UART_REG_LSR_FE RT_BIT(3)
177/** Break Interrupt. */
178# define UART_REG_LSR_BI RT_BIT(4)
179/** Transmitter Holding Register. */
180# define UART_REG_LSR_THRE RT_BIT(5)
181/** Transmitter Empty. */
182# define UART_REG_LSR_TEMT RT_BIT(6)
183/** Error in receiver FIFO. */
184# define UART_REG_LSR_RCV_FIFO_ERR RT_BIT(7)
185/** The bits to check in this register when checking for the RCL interrupt. */
186# define UART_REG_LSR_BITS_IIR_RCL 0x1e
187
188/** The MSR register index (from the base of the port range). */
189#define UART_REG_MSR_INDEX 6
190/** Delta Clear to Send. */
191# define UART_REG_MSR_DCTS RT_BIT(0)
192/** Delta Data Set Ready. */
193# define UART_REG_MSR_DDSR RT_BIT(1)
194/** Trailing Edge Ring Indicator. */
195# define UART_REG_MSR_TERI RT_BIT(2)
196/** Delta Data Carrier Detect. */
197# define UART_REG_MSR_DDCD RT_BIT(3)
198/** Clear to Send. */
199# define UART_REG_MSR_CTS RT_BIT(4)
200/** Data Set Ready. */
201# define UART_REG_MSR_DSR RT_BIT(5)
202/** Ring Indicator. */
203# define UART_REG_MSR_RI RT_BIT(6)
204/** Data Carrier Detect. */
205# define UART_REG_MSR_DCD RT_BIT(7)
206/** The bits to check in this register when checking for the MS interrupt. */
207# define UART_REG_MSR_BITS_IIR_MS 0x0f
208
209/** The SCR register index (from the base of the port range). */
210#define UART_REG_SCR_INDEX 7
211
212/** Set the specified bits in the given register. */
213#define UART_REG_SET(a_Reg, a_Set) ((a_Reg) |= (a_Set))
214/** Clear the specified bits in the given register. */
215#define UART_REG_CLR(a_Reg, a_Clr) ((a_Reg) &= ~(a_Clr))
216
217
218/*********************************************************************************************************************************
219* Structures and Typedefs *
220*********************************************************************************************************************************/
221
222#ifndef VBOX_DEVICE_STRUCT_TESTCASE
223
224
225/*********************************************************************************************************************************
226* Global Variables *
227*********************************************************************************************************************************/
228
229#ifdef IN_RING3
230/**
231 * FIFO ITL levels.
232 */
233static struct
234{
235 /** ITL level for a 16byte FIFO. */
236 uint8_t cbItl16;
237 /** ITL level for a 64byte FIFO. */
238 uint8_t cbItl64;
239} s_aFifoItl[] =
240{
241 /* cbItl16 cbItl64 */
242 { 1, 1 },
243 { 4, 16 },
244 { 8, 32 },
245 { 14, 56 }
246};
247
248
249/**
250 * String versions of the parity enum.
251 */
252static const char *s_aszParity[] =
253{
254 "INVALID",
255 "NONE",
256 "EVEN",
257 "ODD",
258 "MARK",
259 "SPACE",
260 "INVALID"
261};
262
263
264/**
265 * String versions of the stop bits enum.
266 */
267static const char *s_aszStopBits[] =
268{
269 "INVALID",
270 "1",
271 "1.5",
272 "2",
273 "INVALID"
274};
275#endif
276
277
278/*********************************************************************************************************************************
279* Internal Functions *
280*********************************************************************************************************************************/
281
282
283/**
284 * Updates the IRQ state based on the current device state.
285 *
286 * @param pDevIns The device instance.
287 * @param pThis The shared serial port instance data.
288 * @param pThisCC The serial port instance data for the current context.
289 */
290static void uartIrqUpdate(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
291{
292 LogFlowFunc(("pThis=%#p\n", pThis));
293
294 /*
295 * The interrupt uses a priority scheme, only the interrupt with the
296 * highest priority is indicated in the interrupt identification register.
297 *
298 * The priorities are as follows (high to low):
299 * * Receiver line status
300 * * Received data available
301 * * Character timeout indication (only in FIFO mode).
302 * * Transmitter holding register empty
303 * * Modem status change.
304 */
305 uint8_t uRegIirNew = UART_REG_IIR_IP_NO_INT;
306 if ( (pThis->uRegLsr & UART_REG_LSR_BITS_IIR_RCL)
307 && (pThis->uRegIer & UART_REG_IER_ELSI))
308 uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_RCL);
309 else if ( (pThis->uRegIer & UART_REG_IER_ERBFI)
310 && pThis->fIrqCtiPending)
311 uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_CTI);
312 else if ( (pThis->uRegLsr & UART_REG_LSR_DR)
313 && (pThis->uRegIer & UART_REG_IER_ERBFI)
314 && ( !(pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
315 || pThis->FifoRecv.cbUsed >= pThis->FifoRecv.cbItl))
316 uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_RDA);
317 else if ( (pThis->uRegIer & UART_REG_IER_ETBEI)
318 && pThis->fThreEmptyPending)
319 uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_THRE);
320 else if ( (pThis->uRegMsr & UART_REG_MSR_BITS_IIR_MS)
321 && (pThis->uRegIer & UART_REG_IER_EDSSI))
322 uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_MS);
323
324 LogFlowFunc((" uRegIirNew=%#x uRegIir=%#x\n", uRegIirNew, pThis->uRegIir));
325
326 if (uRegIirNew != (pThis->uRegIir & UART_REG_IIR_CHANGED_MASK))
327 LogFlow((" Interrupt source changed from %#x -> %#x (IRQ %d -> %d)\n",
328 pThis->uRegIir, uRegIirNew,
329 pThis->uRegIir == UART_REG_IIR_IP_NO_INT ? 0 : 1,
330 uRegIirNew == UART_REG_IIR_IP_NO_INT ? 0 : 1));
331 else
332 LogFlow((" No change in interrupt source\n"));
333
334 /*
335 * Set interrupt value accordingly. As this is an ISA device most guests
336 * configure the IRQ as edge triggered instead of level triggered.
337 * So this needs to be done everytime, even if the internal interrupt state
338 * doesn't change in order to avoid the guest losing interrupts (reading one byte at
339 * a time from the FIFO for instance which doesn't change the interrupt source).
340 */
341 if (uRegIirNew == UART_REG_IIR_IP_NO_INT)
342 pThisCC->pfnUartIrqReq(pDevIns, pThis, pThis->iLUN, 0);
343 else
344 pThisCC->pfnUartIrqReq(pDevIns, pThis, pThis->iLUN, 1);
345
346 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
347 uRegIirNew |= UART_REG_IIR_FIFOS_EN;
348 if (pThis->uRegFcr & UART_REG_FCR_64BYTE_FIFO_EN)
349 uRegIirNew |= UART_REG_IIR_64BYTE_FIFOS_EN;
350
351 pThis->uRegIir = uRegIirNew;
352}
353
354
355/**
356 * Returns the amount of bytes stored in the given FIFO.
357 *
358 * @returns Amount of bytes stored in the FIFO.
359 * @param pFifo The FIFO.
360 */
361DECLINLINE(size_t) uartFifoUsedGet(PUARTFIFO pFifo)
362{
363 return pFifo->cbUsed;
364}
365
366
367/**
368 * Puts a new character into the given FIFO.
369 *
370 * @returns Flag whether the FIFO overflowed.
371 * @param pFifo The FIFO to put the data into.
372 * @param fOvrWr Flag whether to overwrite data if the FIFO is full.
373 * @param bData The data to add.
374 */
375DECLINLINE(bool) uartFifoPut(PUARTFIFO pFifo, bool fOvrWr, uint8_t bData)
376{
377 if (fOvrWr || pFifo->cbUsed < pFifo->cbMax)
378 {
379 pFifo->abBuf[pFifo->offWrite] = bData;
380 pFifo->offWrite = (pFifo->offWrite + 1) % pFifo->cbMax;
381 }
382
383 bool fOverFlow = false;
384 if (pFifo->cbUsed < pFifo->cbMax)
385 pFifo->cbUsed++;
386 else
387 {
388 fOverFlow = true;
389 if (fOvrWr) /* Advance the read position to account for the lost character. */
390 pFifo->offRead = (pFifo->offRead + 1) % pFifo->cbMax;
391 }
392
393 return fOverFlow;
394}
395
396
397/**
398 * Returns the next character in the FIFO.
399 *
400 * @return Next byte in the FIFO.
401 * @param pFifo The FIFO to get data from.
402 */
403DECLINLINE(uint8_t) uartFifoGet(PUARTFIFO pFifo)
404{
405 uint8_t bRet = 0;
406
407 if (pFifo->cbUsed)
408 {
409 bRet = pFifo->abBuf[pFifo->offRead];
410 pFifo->offRead = (pFifo->offRead + 1) % pFifo->cbMax;
411 pFifo->cbUsed--;
412 }
413
414 return bRet;
415}
416
417#ifdef IN_RING3
418
419/**
420 * Clears the given FIFO.
421 *
422 * @param pFifo The FIFO to clear.
423 */
424DECLINLINE(void) uartFifoClear(PUARTFIFO pFifo)
425{
426 memset(&pFifo->abBuf[0], 0, sizeof(pFifo->abBuf));
427 pFifo->cbUsed = 0;
428 pFifo->offWrite = 0;
429 pFifo->offRead = 0;
430}
431
432
433/**
434 * Returns the amount of free bytes in the given FIFO.
435 *
436 * @returns The amount of bytes free in the given FIFO.
437 * @param pFifo The FIFO.
438 */
439DECLINLINE(size_t) uartFifoFreeGet(PUARTFIFO pFifo)
440{
441 return pFifo->cbMax - pFifo->cbUsed;
442}
443
444
445/**
446 * Tries to copy the requested amount of data from the given FIFO into the provided buffer.
447 *
448 * @returns Amount of bytes actually copied.
449 * @param pFifo The FIFO to copy data from.
450 * @param pvDst Where to copy the data to.
451 * @param cbCopy How much to copy.
452 */
453DECLINLINE(size_t) uartFifoCopyTo(PUARTFIFO pFifo, void *pvDst, size_t cbCopy)
454{
455 size_t cbCopied = 0;
456 uint8_t *pbDst = (uint8_t *)pvDst;
457
458 cbCopy = RT_MIN(cbCopy, pFifo->cbUsed);
459 while (cbCopy)
460 {
461 uint8_t cbThisCopy = (uint8_t)RT_MIN(cbCopy, (uint8_t)(pFifo->cbMax - pFifo->offRead));
462 memcpy(pbDst, &pFifo->abBuf[pFifo->offRead], cbThisCopy);
463
464 pFifo->offRead = (pFifo->offRead + cbThisCopy) % pFifo->cbMax;
465 pFifo->cbUsed -= cbThisCopy;
466 pbDst += cbThisCopy;
467 cbCopied += cbThisCopy;
468 cbCopy -= cbThisCopy;
469 }
470
471 return cbCopied;
472}
473
474
475#if 0 /* unused */
476/**
477 * Tries to copy the requested amount of data from the provided buffer into the given FIFO.
478 *
479 * @returns Amount of bytes actually copied.
480 * @param pFifo The FIFO to copy data to.
481 * @param pvSrc Where to copy the data from.
482 * @param cbCopy How much to copy.
483 */
484DECLINLINE(size_t) uartFifoCopyFrom(PUARTFIFO pFifo, void *pvSrc, size_t cbCopy)
485{
486 size_t cbCopied = 0;
487 uint8_t *pbSrc = (uint8_t *)pvSrc;
488
489 cbCopy = RT_MIN(cbCopy, uartFifoFreeGet(pFifo));
490 while (cbCopy)
491 {
492 uint8_t cbThisCopy = (uint8_t)RT_MIN(cbCopy, (uint8_t)(pFifo->cbMax - pFifo->offWrite));
493 memcpy(&pFifo->abBuf[pFifo->offWrite], pbSrc, cbThisCopy);
494
495 pFifo->offWrite = (pFifo->offWrite + cbThisCopy) % pFifo->cbMax;
496 pFifo->cbUsed += cbThisCopy;
497 pbSrc += cbThisCopy;
498 cbCopied += cbThisCopy;
499 cbCopy -= cbThisCopy;
500 }
501
502 return cbCopied;
503}
504#endif
505
506
507/**
508 * Updates the delta bits for the given MSR register value which has the status line
509 * bits set.
510 *
511 * @param pDevIns The device instance.
512 * @param pThis The shared serial port instance data.
513 * @param pThisCC The serial port instance data for the current context.
514 * @param uMsrSts MSR value with the appropriate status bits set.
515 */
516static void uartR3MsrUpdate(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uMsrSts)
517{
518 /* Compare current and new states and set remaining bits accordingly. */
519 if ((uMsrSts & UART_REG_MSR_CTS) != (pThis->uRegMsr & UART_REG_MSR_CTS))
520 uMsrSts |= UART_REG_MSR_DCTS;
521 if ((uMsrSts & UART_REG_MSR_DSR) != (pThis->uRegMsr & UART_REG_MSR_DSR))
522 uMsrSts |= UART_REG_MSR_DDSR;
523 if ((uMsrSts & UART_REG_MSR_RI) != 0 && (pThis->uRegMsr & UART_REG_MSR_RI) == 0)
524 uMsrSts |= UART_REG_MSR_TERI;
525 if ((uMsrSts & UART_REG_MSR_DCD) != (pThis->uRegMsr & UART_REG_MSR_DCD))
526 uMsrSts |= UART_REG_MSR_DDCD;
527
528 pThis->uRegMsr = uMsrSts;
529
530 uartIrqUpdate(pDevIns, pThis, pThisCC);
531}
532
533
534/**
535 * Updates the serial port parameters of the attached driver with the current configuration.
536 *
537 * @param pDevIns The device instance.
538 * @param pThis The shared serial port instance data.
539 * @param pThisCC The serial port instance data for the current context.
540 */
541static void uartR3ParamsUpdate(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
542{
543 if ( pThis->uRegDivisor != 0
544 && pThisCC->pDrvSerial)
545 {
546 uint32_t uBps = 115200 / pThis->uRegDivisor; /* This is for PC compatible serial port with a 1.8432 MHz crystal. */
547 unsigned cDataBits = UART_REG_LCR_WLS_GET(pThis->uRegLcr) + 5;
548 uint32_t cFrameBits = cDataBits;
549 PDMSERIALSTOPBITS enmStopBits = PDMSERIALSTOPBITS_ONE;
550 PDMSERIALPARITY enmParity = PDMSERIALPARITY_NONE;
551
552 if (pThis->uRegLcr & UART_REG_LCR_STB)
553 {
554 enmStopBits = cDataBits == 5 ? PDMSERIALSTOPBITS_ONEPOINTFIVE : PDMSERIALSTOPBITS_TWO;
555 cFrameBits += 2;
556 }
557 else
558 cFrameBits++;
559
560 if (pThis->uRegLcr & UART_REG_LCR_PEN)
561 {
562 /* Select the correct parity mode based on the even and stick parity bits. */
563 switch (pThis->uRegLcr & (UART_REG_LCR_EPS | UART_REG_LCR_PAR_STICK))
564 {
565 case 0:
566 enmParity = PDMSERIALPARITY_ODD;
567 break;
568 case UART_REG_LCR_EPS:
569 enmParity = PDMSERIALPARITY_EVEN;
570 break;
571 case UART_REG_LCR_EPS | UART_REG_LCR_PAR_STICK:
572 enmParity = PDMSERIALPARITY_SPACE;
573 break;
574 case UART_REG_LCR_PAR_STICK:
575 enmParity = PDMSERIALPARITY_MARK;
576 break;
577 default:
578 /* We should never get here as all cases where caught earlier. */
579 AssertMsgFailed(("This shouldn't happen at all: %#x\n",
580 pThis->uRegLcr & (UART_REG_LCR_EPS | UART_REG_LCR_PAR_STICK)));
581 }
582
583 cFrameBits++;
584 }
585
586 uint64_t uTimerFreq = PDMDevHlpTimerGetFreq(pDevIns, pThis->hTimerRcvFifoTimeout);
587 pThis->cSymbolXferTicks = (uTimerFreq / uBps) * cFrameBits;
588
589 LogFlowFunc(("Changing parameters to: %u,%s,%u,%s\n",
590 uBps, s_aszParity[enmParity], cDataBits, s_aszStopBits[enmStopBits]));
591
592 int rc = pThisCC->pDrvSerial->pfnChgParams(pThisCC->pDrvSerial, uBps, enmParity, cDataBits, enmStopBits);
593 if (RT_FAILURE(rc))
594 LogRelMax(10, ("Serial#%d: Failed to change parameters to %u,%s,%u,%s -> %Rrc\n",
595 pDevIns->iInstance, uBps, s_aszParity[enmParity], cDataBits, s_aszStopBits[enmStopBits], rc));
596
597 /* Changed parameters will flush all receive queues, so there won't be any data to read even if indicated. */
598 pThisCC->pDrvSerial->pfnQueuesFlush(pThisCC->pDrvSerial, true /*fQueueRecv*/, false /*fQueueXmit*/);
599 ASMAtomicWriteU32(&pThis->cbAvailRdr, 0);
600 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
601 }
602}
603
604
605/**
606 * Updates the internal device state with the given PDM status line states.
607 *
608 * @param pDevIns The device instance.
609 * @param pThis The shared serial port instance data.
610 * @param pThisCC The serial port instance data for the current context.
611 * @param fStsLines The PDM status line states.
612 */
613static void uartR3StsLinesUpdate(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint32_t fStsLines)
614{
615 uint8_t uRegMsrNew = 0; /* The new MSR value. */
616
617 if (fStsLines & PDMISERIALPORT_STS_LINE_DCD)
618 uRegMsrNew |= UART_REG_MSR_DCD;
619 if (fStsLines & PDMISERIALPORT_STS_LINE_RI)
620 uRegMsrNew |= UART_REG_MSR_RI;
621 if (fStsLines & PDMISERIALPORT_STS_LINE_DSR)
622 uRegMsrNew |= UART_REG_MSR_DSR;
623 if (fStsLines & PDMISERIALPORT_STS_LINE_CTS)
624 uRegMsrNew |= UART_REG_MSR_CTS;
625
626 uartR3MsrUpdate(pDevIns, pThis, pThisCC, uRegMsrNew);
627}
628
629
630/**
631 * Fills up the receive FIFO with as much data as possible.
632 *
633 * @param pDevIns The device instance.
634 * @param pThis The shared serial port instance data.
635 * @param pThisCC The serial port instance data for the current context.
636 */
637static void uartR3RecvFifoFill(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
638{
639 LogFlowFunc(("pThis=%#p\n", pThis));
640
641 PUARTFIFO pFifo = &pThis->FifoRecv;
642 size_t const cbFifoFree = uartFifoFreeGet(pFifo);
643 uint32_t const cbAvailRdr = ASMAtomicReadU32(&pThis->cbAvailRdr);
644 size_t const cbFill = RT_MIN(cbFifoFree, cbAvailRdr);
645 size_t cbFilled = 0;
646
647 while (cbFilled < cbFill)
648 {
649 size_t cbThisRead = cbFill - cbFilled;
650
651 if (pFifo->offRead <= pFifo->offWrite)
652 cbThisRead = RT_MIN(cbThisRead, (uint8_t)(pFifo->cbMax - pFifo->offWrite));
653 else
654 cbThisRead = RT_MIN(cbThisRead, (uint8_t)(pFifo->offRead - pFifo->offWrite));
655
656 size_t cbRead = 0;
657 int rc = pThisCC->pDrvSerial->pfnReadRdr(pThisCC->pDrvSerial, &pFifo->abBuf[pFifo->offWrite], cbThisRead, &cbRead);
658 AssertRC(rc); Assert(cbRead <= UINT8_MAX); RT_NOREF(rc);
659
660 pFifo->offWrite = (pFifo->offWrite + (uint8_t)cbRead) % pFifo->cbMax;
661 pFifo->cbUsed += (uint8_t)cbRead;
662 cbFilled += cbRead;
663
664 if (cbRead < cbThisRead)
665 break;
666 }
667
668 if (cbFilled)
669 {
670 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
671 if (pFifo->cbUsed < pFifo->cbItl)
672 {
673 pThis->fIrqCtiPending = false;
674 PDMDevHlpTimerSetRelative(pDevIns, pThis->hTimerRcvFifoTimeout, pThis->cSymbolXferTicks * 4, NULL);
675 }
676 uartIrqUpdate(pDevIns, pThis, pThisCC);
677 }
678
679 Assert(cbFilled <= (size_t)pThis->cbAvailRdr);
680 ASMAtomicSubU32(&pThis->cbAvailRdr, (uint32_t)cbFilled);
681}
682
683
684/**
685 * Fetches a single byte and writes it to RBR.
686 *
687 * @param pDevIns The device instance.
688 * @param pThis The shared serial port instance data.
689 * @param pThisCC The serial port instance data for the current context.
690 */
691static void uartR3ByteFetch(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
692{
693 if (ASMAtomicReadU32(&pThis->cbAvailRdr))
694 {
695 size_t cbRead = 0;
696 int rc2 = pThisCC->pDrvSerial->pfnReadRdr(pThisCC->pDrvSerial, &pThis->uRegRbr, 1, &cbRead);
697 AssertMsg(RT_SUCCESS(rc2) && cbRead == 1, ("This shouldn't fail and always return one byte!\n")); RT_NOREF(rc2);
698 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
699 uartIrqUpdate(pDevIns, pThis, pThisCC);
700 }
701}
702
703
704/**
705 * Fetches a ready data based on the FIFO setting.
706 *
707 * @param pDevIns The device instance.
708 * @param pThis The shared serial port instance data.
709 * @param pThisCC The serial port instance data for the current context.
710 */
711static void uartR3DataFetch(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
712{
713 AssertPtrReturnVoid(pThisCC->pDrvSerial);
714
715 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
716 uartR3RecvFifoFill(pDevIns, pThis, pThisCC);
717 else
718 uartR3ByteFetch(pDevIns, pThis, pThisCC);
719}
720
721
722/**
723 * Reset the transmit/receive related bits to the standard values
724 * (after a detach/attach/reset event).
725 *
726 * @param pDevIns The device instance.
727 * @param pThis The shared serial port instance data.
728 * @param pThisCC The serial port instance data for the current context.
729 */
730static void uartR3XferReset(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
731{
732 PDMDevHlpTimerStop(pDevIns, pThis->hTimerRcvFifoTimeout);
733 PDMDevHlpTimerStop(pDevIns, pThis->hTimerTxUnconnected);
734 pThis->uRegLsr = UART_REG_LSR_THRE | UART_REG_LSR_TEMT;
735 pThis->fThreEmptyPending = false;
736
737 uartFifoClear(&pThis->FifoXmit);
738 uartFifoClear(&pThis->FifoRecv);
739 uartR3ParamsUpdate(pDevIns, pThis, pThisCC);
740 uartIrqUpdate(pDevIns, pThis, pThisCC);
741
742 if (pThisCC->pDrvSerial)
743 {
744 /* Set the modem lines to reflect the current state. */
745 int rc = pThisCC->pDrvSerial->pfnChgModemLines(pThisCC->pDrvSerial, false /*fRts*/, false /*fDtr*/);
746 if (RT_FAILURE(rc))
747 LogRel(("Serial#%d: Failed to set modem lines with %Rrc during reset\n",
748 pDevIns->iInstance, rc));
749
750 uint32_t fStsLines = 0;
751 rc = pThisCC->pDrvSerial->pfnQueryStsLines(pThisCC->pDrvSerial, &fStsLines);
752 if (RT_SUCCESS(rc))
753 uartR3StsLinesUpdate(pDevIns, pThis, pThisCC, fStsLines);
754 else
755 LogRel(("Serial#%d: Failed to query status line status with %Rrc during reset\n",
756 pDevIns->iInstance, rc));
757 }
758
759}
760
761
762/**
763 * Tries to copy the specified amount of data from the active TX queue (register or FIFO).
764 *
765 * @param pDevIns The device instance.
766 * @param pThis The shared serial port instance data.
767 * @param pThisCC The serial port instance data for the current context.
768 * @param pvBuf Where to store the data.
769 * @param cbRead How much to read from the TX queue.
770 * @param pcbRead Where to store the amount of data read.
771 */
772static void uartR3TxQueueCopyFrom(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC,
773 void *pvBuf, size_t cbRead, size_t *pcbRead)
774{
775 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
776 {
777 *pcbRead = uartFifoCopyTo(&pThis->FifoXmit, pvBuf, cbRead);
778 if (!pThis->FifoXmit.cbUsed)
779 {
780 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_THRE);
781 pThis->fThreEmptyPending = true;
782 }
783 if (*pcbRead)
784 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_TEMT);
785 uartIrqUpdate(pDevIns, pThis, pThisCC);
786 }
787 else if (!(pThis->uRegLsr & UART_REG_LSR_THRE))
788 {
789 *(uint8_t *)pvBuf = pThis->uRegThr;
790 *pcbRead = 1;
791 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_THRE);
792 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_TEMT);
793 pThis->fThreEmptyPending = true;
794 uartIrqUpdate(pDevIns, pThis, pThisCC);
795 }
796 else
797 {
798 /*
799 * This can happen if there was data in the FIFO when the connection was closed,
800 * indicate this condition to the lower driver by returning 0 bytes.
801 */
802 *pcbRead = 0;
803 }
804}
805
806#endif /* IN_RING3 */
807
808
809/**
810 * Transmits the given byte.
811 *
812 * @returns Strict VBox status code.
813 * @param pDevIns The device instance.
814 * @param pThis The shared serial port instance data.
815 * @param pThisCC The serial port instance data for the current context.
816 * @param bVal Byte to transmit.
817 */
818static VBOXSTRICTRC uartXmit(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t bVal)
819{
820 int rc = VINF_SUCCESS;
821#ifdef IN_RING3
822 bool fNotifyDrv = false;
823#endif
824
825 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
826 {
827#ifndef IN_RING3
828 RT_NOREF(pDevIns, pThisCC);
829 if (!uartFifoUsedGet(&pThis->FifoXmit))
830 rc = VINF_IOM_R3_IOPORT_WRITE;
831 else
832 {
833 uartFifoPut(&pThis->FifoXmit, true /*fOvrWr*/, bVal);
834 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE | UART_REG_LSR_TEMT);
835 }
836#else
837 uartFifoPut(&pThis->FifoXmit, true /*fOvrWr*/, bVal);
838 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE | UART_REG_LSR_TEMT);
839 pThis->fThreEmptyPending = false;
840 uartIrqUpdate(pDevIns, pThis, pThisCC);
841 if (uartFifoUsedGet(&pThis->FifoXmit) == 1)
842 fNotifyDrv = true;
843#endif
844 }
845 else
846 {
847 /* Notify the lower driver about available data only if the register was empty before. */
848 if (pThis->uRegLsr & UART_REG_LSR_THRE)
849 {
850#ifndef IN_RING3
851 rc = VINF_IOM_R3_IOPORT_WRITE;
852#else
853 pThis->uRegThr = bVal;
854 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE | UART_REG_LSR_TEMT);
855 pThis->fThreEmptyPending = false;
856 uartIrqUpdate(pDevIns, pThis, pThisCC);
857 fNotifyDrv = true;
858#endif
859 }
860 else
861 pThis->uRegThr = bVal;
862 }
863
864#ifdef IN_RING3
865 if (fNotifyDrv)
866 {
867 /* Leave the device critical section before calling into the lower driver. */
868 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
869
870 if ( pThisCC->pDrvSerial
871 && !(pThis->uRegMcr & UART_REG_MCR_LOOP))
872 {
873 int rc2 = pThisCC->pDrvSerial->pfnDataAvailWrNotify(pThisCC->pDrvSerial);
874 if (RT_FAILURE(rc2))
875 LogRelMax(10, ("Serial#%d: Failed to send data with %Rrc\n", pDevIns->iInstance, rc2));
876 }
877 else
878 PDMDevHlpTimerSetRelative(pDevIns, pThis->hTimerTxUnconnected, pThis->cSymbolXferTicks, NULL);
879
880 rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VINF_SUCCESS);
881 }
882#endif
883
884 return rc;
885}
886
887
888/**
889 * Write handler for the THR/DLL register (depending on the DLAB bit in LCR).
890 *
891 * @returns Strict VBox status code.
892 * @param pDevIns The device instance.
893 * @param pThis The shared serial port instance data.
894 * @param pThisCC The serial port instance data for the current context.
895 * @param uVal The value to write.
896 */
897DECLINLINE(VBOXSTRICTRC) uartRegThrDllWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uVal)
898{
899 VBOXSTRICTRC rc = VINF_SUCCESS;
900
901 /* A set DLAB causes a write to the lower 8bits of the divisor latch. */
902 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
903 {
904 if (uVal != (pThis->uRegDivisor & 0xff))
905 {
906#ifndef IN_RING3
907 rc = VINF_IOM_R3_IOPORT_WRITE;
908#else
909 pThis->uRegDivisor = (pThis->uRegDivisor & 0xff00) | uVal;
910 uartR3ParamsUpdate(pDevIns, pThis, pThisCC);
911#endif
912 }
913 }
914 else
915 rc = uartXmit(pDevIns, pThis, pThisCC, uVal);
916
917 return rc;
918}
919
920
921/**
922 * Write handler for the IER/DLM register (depending on the DLAB bit in LCR).
923 *
924 * @returns Strict VBox status code.
925 * @param pDevIns The device instance.
926 * @param pThis The shared serial port instance data.
927 * @param pThisCC The serial port instance data for the current context.
928 * @param uVal The value to write.
929 */
930DECLINLINE(VBOXSTRICTRC) uartRegIerDlmWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uVal)
931{
932 /* A set DLAB causes a write to the higher 8bits of the divisor latch. */
933 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
934 {
935 if (uVal != (pThis->uRegDivisor & 0xff00) >> 8)
936 {
937#ifndef IN_RING3
938 return VINF_IOM_R3_IOPORT_WRITE;
939#else
940 pThis->uRegDivisor = (pThis->uRegDivisor & 0xff) | (uVal << 8);
941 uartR3ParamsUpdate(pDevIns, pThis, pThisCC);
942#endif
943 }
944 }
945 else
946 {
947 if (pThis->enmType < UARTTYPE_16750)
948 pThis->uRegIer = uVal & UART_REG_IER_MASK_WR;
949 else
950 pThis->uRegIer = uVal & UART_REG_IER_MASK_WR_16750;
951
952 if (pThis->uRegLsr & UART_REG_LSR_THRE)
953 pThis->fThreEmptyPending = true;
954
955 uartIrqUpdate(pDevIns, pThis, pThisCC);
956 }
957 return VINF_SUCCESS;
958}
959
960
961/**
962 * Write handler for the FCR register.
963 *
964 * @returns Strict VBox status code.
965 * @param pDevIns The device instance.
966 * @param pThis The shared serial port instance data.
967 * @param pThisCC The serial port instance data for the current context.
968 * @param uVal The value to write.
969 */
970DECLINLINE(VBOXSTRICTRC) uartRegFcrWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uVal)
971{
972#ifndef IN_RING3
973 RT_NOREF(pDevIns, pThis, pThisCC, uVal);
974 return VINF_IOM_R3_IOPORT_WRITE;
975#else /* IN_RING3 */
976 if ( pThis->enmType >= UARTTYPE_16550A
977 && uVal != pThis->uRegFcr)
978 {
979 /* A change in the FIFO enable bit clears both FIFOs automatically. */
980 if ((uVal ^ pThis->uRegFcr) & UART_REG_FCR_FIFO_EN)
981 {
982 uartFifoClear(&pThis->FifoXmit);
983 uartFifoClear(&pThis->FifoRecv);
984
985 /*
986 * If the FIFO is about to be enabled and the DR bit is ready we have an unacknowledged
987 * byte in the RBR register which will be lost so we have to adjust the available bytes.
988 */
989 if ( ASMAtomicReadU32(&pThis->cbAvailRdr) > 0
990 && (uVal & UART_REG_FCR_FIFO_EN))
991 ASMAtomicDecU32(&pThis->cbAvailRdr);
992
993 /* Clear the DR bit too. */
994 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
995 }
996
997 /** @todo r=bird: Why was this here: if (rc == VINF_SUCCESS) */
998 {
999 if (uVal & UART_REG_FCR_RCV_FIFO_RST)
1000 {
1001 PDMDevHlpTimerStop(pDevIns, pThis->hTimerRcvFifoTimeout);
1002 pThis->fIrqCtiPending = false;
1003 uartFifoClear(&pThis->FifoRecv);
1004 }
1005 if (uVal & UART_REG_FCR_XMIT_FIFO_RST)
1006 uartFifoClear(&pThis->FifoXmit);
1007
1008 /*
1009 * The 64byte FIFO enable bit is only changeable for 16750
1010 * and if the DLAB bit in LCR is set.
1011 */
1012 if ( pThis->enmType < UARTTYPE_16750
1013 || !(pThis->uRegLcr & UART_REG_LCR_DLAB))
1014 uVal &= ~UART_REG_FCR_64BYTE_FIFO_EN;
1015 else /* Use previous value. */
1016 uVal |= pThis->uRegFcr & UART_REG_FCR_64BYTE_FIFO_EN;
1017
1018 if (uVal & UART_REG_FCR_64BYTE_FIFO_EN)
1019 {
1020 pThis->FifoRecv.cbMax = 64;
1021 pThis->FifoXmit.cbMax = 64;
1022 }
1023 else
1024 {
1025 pThis->FifoRecv.cbMax = 16;
1026 pThis->FifoXmit.cbMax = 16;
1027 }
1028
1029 if (uVal & UART_REG_FCR_FIFO_EN)
1030 {
1031 uint8_t idxItl = UART_REG_FCR_RCV_LVL_IRQ_GET(uVal);
1032 if (uVal & UART_REG_FCR_64BYTE_FIFO_EN)
1033 pThis->FifoRecv.cbItl = s_aFifoItl[idxItl].cbItl64;
1034 else
1035 pThis->FifoRecv.cbItl = s_aFifoItl[idxItl].cbItl16;
1036 }
1037
1038 /* The FIFO reset bits are self clearing. */
1039 pThis->uRegFcr = uVal & UART_REG_FCR_MASK_STICKY;
1040 uartIrqUpdate(pDevIns, pThis, pThisCC);
1041 }
1042
1043 /* Fill in the next data. */
1044 if (ASMAtomicReadU32(&pThis->cbAvailRdr))
1045 uartR3DataFetch(pDevIns, pThis, pThisCC);
1046 }
1047
1048 return VINF_SUCCESS;
1049#endif /* IN_RING3 */
1050}
1051
1052
1053/**
1054 * Write handler for the LCR register.
1055 *
1056 * @returns Strict VBox status code.
1057 * @param pDevIns The device instance.
1058 * @param pThis The shared serial port instance data.
1059 * @param pThisCC The serial port instance data for the current context.
1060 * @param uVal The value to write.
1061 */
1062DECLINLINE(VBOXSTRICTRC) uartRegLcrWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uVal)
1063{
1064 /* Any change except the DLAB bit causes a switch to R3. */
1065 if ((pThis->uRegLcr & ~UART_REG_LCR_DLAB) != (uVal & ~UART_REG_LCR_DLAB))
1066 {
1067#ifndef IN_RING3
1068 RT_NOREF(pThisCC, pDevIns);
1069 return VINF_IOM_R3_IOPORT_WRITE;
1070#else
1071 /* Check whether the BREAK bit changed before updating the LCR value. */
1072 bool fBrkEn = RT_BOOL(uVal & UART_REG_LCR_BRK_SET);
1073 bool fBrkChg = fBrkEn != RT_BOOL(pThis->uRegLcr & UART_REG_LCR_BRK_SET);
1074 pThis->uRegLcr = uVal;
1075 uartR3ParamsUpdate(pDevIns, pThis, pThisCC);
1076
1077 if ( fBrkChg
1078 && pThisCC->pDrvSerial)
1079 pThisCC->pDrvSerial->pfnChgBrk(pThisCC->pDrvSerial, fBrkEn);
1080#endif
1081 }
1082 else
1083 pThis->uRegLcr = uVal;
1084
1085 return VINF_SUCCESS;
1086}
1087
1088
1089/**
1090 * Write handler for the MCR register.
1091 *
1092 * @returns Strict VBox status code.
1093 * @param pDevIns The device instance.
1094 * @param pThis The shared serial port instance data.
1095 * @param pThisCC The serial port instance data for the current context.
1096 * @param uVal The value to write.
1097 */
1098DECLINLINE(VBOXSTRICTRC) uartRegMcrWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint8_t uVal)
1099{
1100 if (pThis->enmType < UARTTYPE_16750)
1101 uVal &= UART_REG_MCR_MASK_WR;
1102 else
1103 uVal &= UART_REG_MCR_MASK_WR_15750;
1104 if (pThis->uRegMcr != uVal)
1105 {
1106#ifndef IN_RING3
1107 RT_NOREF(pThisCC, pDevIns);
1108 return VINF_IOM_R3_IOPORT_WRITE;
1109#else
1110 /*
1111 * When loopback mode is activated the RTS, DTR, OUT1 and OUT2 lines are
1112 * disconnected and looped back to MSR.
1113 */
1114 if ( (uVal & UART_REG_MCR_LOOP)
1115 && !(pThis->uRegMcr & UART_REG_MCR_LOOP)
1116 && pThisCC->pDrvSerial)
1117 pThisCC->pDrvSerial->pfnChgModemLines(pThisCC->pDrvSerial, false /*fRts*/, false /*fDtr*/);
1118
1119 pThis->uRegMcr = uVal;
1120 if (uVal & UART_REG_MCR_LOOP)
1121 {
1122 uint8_t uRegMsrSts = 0;
1123
1124 if (uVal & UART_REG_MCR_RTS)
1125 uRegMsrSts |= UART_REG_MSR_CTS;
1126 if (uVal & UART_REG_MCR_DTR)
1127 uRegMsrSts |= UART_REG_MSR_DSR;
1128 if (uVal & UART_REG_MCR_OUT1)
1129 uRegMsrSts |= UART_REG_MSR_RI;
1130 if (uVal & UART_REG_MCR_OUT2)
1131 uRegMsrSts |= UART_REG_MSR_DCD;
1132 uartR3MsrUpdate(pDevIns, pThis, pThisCC, uRegMsrSts);
1133 }
1134 else if (pThisCC->pDrvSerial)
1135 {
1136 pThisCC->pDrvSerial->pfnChgModemLines(pThisCC->pDrvSerial,
1137 RT_BOOL(uVal & UART_REG_MCR_RTS),
1138 RT_BOOL(uVal & UART_REG_MCR_DTR));
1139
1140 uint32_t fStsLines = 0;
1141 int rc = pThisCC->pDrvSerial->pfnQueryStsLines(pThisCC->pDrvSerial, &fStsLines);
1142 if (RT_SUCCESS(rc))
1143 uartR3StsLinesUpdate(pDevIns, pThis, pThisCC, fStsLines);
1144 else
1145 LogRelMax(10, ("Serial#%d: Failed to query status line status with %Rrc during reset\n",
1146 pDevIns->iInstance, rc));
1147 }
1148 else /* Loopback mode got disabled and no driver attached, fake presence. */
1149 uartR3MsrUpdate(pDevIns, pThis, pThisCC, UART_REG_MSR_DCD | UART_REG_MSR_CTS | UART_REG_MSR_DSR);
1150#endif
1151 }
1152
1153 return VINF_SUCCESS;
1154}
1155
1156
1157/**
1158 * Read handler for the RBR/DLL register (depending on the DLAB bit in LCR).
1159 *
1160 * @returns VBox status code.
1161 * @param pDevIns The device instance.
1162 * @param pThis The shared serial port instance data.
1163 * @param pThisCC The serial port instance data for the current context.
1164 * @param puVal Where to store the read value on success.
1165 */
1166DECLINLINE(VBOXSTRICTRC) uartRegRbrDllRead(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint32_t *puVal)
1167{
1168 VBOXSTRICTRC rc = VINF_SUCCESS;
1169
1170 /* A set DLAB causes a read from the lower 8bits of the divisor latch. */
1171 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1172 *puVal = pThis->uRegDivisor & 0xff;
1173 else
1174 {
1175 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
1176 {
1177 /*
1178 * Only go back to R3 if there is new data available for the FIFO
1179 * and we would clear the interrupt to fill it up again.
1180 */
1181 if ( pThis->FifoRecv.cbUsed <= pThis->FifoRecv.cbItl
1182 && ASMAtomicReadU32(&pThis->cbAvailRdr) > 0)
1183 {
1184#ifndef IN_RING3
1185 rc = VINF_IOM_R3_IOPORT_READ;
1186#else
1187 uartR3RecvFifoFill(pDevIns, pThis, pThisCC);
1188#endif
1189 }
1190
1191 if (rc == VINF_SUCCESS)
1192 {
1193 *puVal = uartFifoGet(&pThis->FifoRecv);
1194 pThis->fIrqCtiPending = false;
1195 if (!pThis->FifoRecv.cbUsed)
1196 {
1197 PDMDevHlpTimerStop(pDevIns, pThis->hTimerRcvFifoTimeout);
1198 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
1199 }
1200 else if (pThis->FifoRecv.cbUsed < pThis->FifoRecv.cbItl)
1201 PDMDevHlpTimerSetRelative(pDevIns, pThis->hTimerRcvFifoTimeout,
1202 pThis->cSymbolXferTicks * 4, NULL);
1203 uartIrqUpdate(pDevIns, pThis, pThisCC);
1204 }
1205 }
1206 else
1207 {
1208 *puVal = pThis->uRegRbr;
1209
1210 if (pThis->uRegLsr & UART_REG_LSR_DR)
1211 {
1212 Assert(pThis->cbAvailRdr);
1213 uint32_t cbAvail = ASMAtomicDecU32(&pThis->cbAvailRdr);
1214 if (!cbAvail)
1215 {
1216 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
1217 uartIrqUpdate(pDevIns, pThis, pThisCC);
1218 }
1219 else
1220 {
1221#ifndef IN_RING3
1222 /* Restore state and go back to R3. */
1223 ASMAtomicIncU32(&pThis->cbAvailRdr);
1224 rc = VINF_IOM_R3_IOPORT_READ;
1225#else
1226 /* Fetch new data and keep the DR bit set. */
1227 uartR3DataFetch(pDevIns, pThis, pThisCC);
1228#endif
1229 }
1230 }
1231 }
1232 }
1233
1234 return rc;
1235}
1236
1237
1238/**
1239 * Read handler for the IER/DLM register (depending on the DLAB bit in LCR).
1240 *
1241 * @param pThis The shared serial port instance data.
1242 * @param puVal Where to store the read value on success.
1243 */
1244DECLINLINE(void) uartRegIerDlmRead(PUARTCORE pThis, uint32_t *puVal)
1245{
1246 /* A set DLAB causes a read from the upper 8bits of the divisor latch. */
1247 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1248 *puVal = (pThis->uRegDivisor & 0xff00) >> 8;
1249 else
1250 *puVal = pThis->uRegIer;
1251}
1252
1253
1254/**
1255 * Read handler for the IIR register.
1256 *
1257 * @param pDevIns The device instance.
1258 * @param pThis The shared serial port instance data.
1259 * @param pThisCC The serial port instance data for the current context.
1260 * @param puVal Where to store the read value on success.
1261 */
1262DECLINLINE(void) uartRegIirRead(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint32_t *puVal)
1263{
1264 *puVal = pThis->uRegIir;
1265 /* Reset the THRE empty interrupt id when this gets returned to the guest (see table 3 UART Reset configuration). */
1266 if (UART_REG_IIR_ID_GET(pThis->uRegIir) == UART_REG_IIR_ID_THRE)
1267 {
1268 pThis->fThreEmptyPending = false;
1269 uartIrqUpdate(pDevIns, pThis, pThisCC);
1270 }
1271}
1272
1273
1274/**
1275 * Read handler for the LSR register.
1276 *
1277 * @returns Strict VBox status code.
1278 * @param pDevIns The device instance.
1279 * @param pThis The shared serial port instance data.
1280 * @param pThisCC The serial port instance data for the current context.
1281 * @param puVal Where to store the read value on success.
1282 */
1283DECLINLINE(VBOXSTRICTRC) uartRegLsrRead(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint32_t *puVal)
1284{
1285 /* Yield if configured and there is no data available. */
1286 if ( !(pThis->uRegLsr & UART_REG_LSR_DR)
1287 && (pThis->fFlags & UART_CORE_YIELD_ON_LSR_READ))
1288 {
1289#ifndef IN_RING3
1290 return VINF_IOM_R3_IOPORT_READ;
1291#else
1292 RTThreadYield();
1293#endif
1294 }
1295
1296 *puVal = pThis->uRegLsr;
1297 /*
1298 * Reading this register clears the Overrun (OE), Parity (PE) and Framing (FE) error
1299 * as well as the Break Interrupt (BI).
1300 */
1301 UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_BITS_IIR_RCL);
1302 uartIrqUpdate(pDevIns, pThis, pThisCC);
1303
1304 return VINF_SUCCESS;
1305}
1306
1307
1308/**
1309 * Read handler for the MSR register.
1310 *
1311 * @param pDevIns The device instance.
1312 * @param pThis The shared serial port instance data.
1313 * @param pThisCC The serial port instance data for the current context.
1314 * @param puVal Where to store the read value on success.
1315 */
1316DECLINLINE(void) uartRegMsrRead(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, uint32_t *puVal)
1317{
1318 *puVal = pThis->uRegMsr;
1319
1320 /* Clear any of the delta bits. */
1321 UART_REG_CLR(pThis->uRegMsr, UART_REG_MSR_BITS_IIR_MS);
1322 uartIrqUpdate(pDevIns, pThis, pThisCC);
1323}
1324
1325
1326#ifdef LOG_ENABLED
1327/**
1328 * Converts the register index into a sensible memnonic.
1329 *
1330 * @returns Register memnonic.
1331 * @param pThis The shared serial port instance data.
1332 * @param idxReg Register index.
1333 * @param fWrite Flag whether the register gets written.
1334 */
1335DECLINLINE(const char *) uartRegIdx2Str(PUARTCORE pThis, uint8_t idxReg, bool fWrite)
1336{
1337 const char *psz = "INV";
1338
1339 switch (idxReg)
1340 {
1341 /*case UART_REG_THR_DLL_INDEX:*/
1342 case UART_REG_RBR_DLL_INDEX:
1343 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1344 psz = "DLL";
1345 else if (fWrite)
1346 psz = "THR";
1347 else
1348 psz = "RBR";
1349 break;
1350 case UART_REG_IER_DLM_INDEX:
1351 if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1352 psz = "DLM";
1353 else
1354 psz = "IER";
1355 break;
1356 /*case UART_REG_IIR_INDEX:*/
1357 case UART_REG_FCR_INDEX:
1358 if (fWrite)
1359 psz = "FCR";
1360 else
1361 psz = "IIR";
1362 break;
1363 case UART_REG_LCR_INDEX:
1364 psz = "LCR";
1365 break;
1366 case UART_REG_MCR_INDEX:
1367 psz = "MCR";
1368 break;
1369 case UART_REG_LSR_INDEX:
1370 psz = "LSR";
1371 break;
1372 case UART_REG_MSR_INDEX:
1373 psz = "MSR";
1374 break;
1375 case UART_REG_SCR_INDEX:
1376 psz = "SCR";
1377 break;
1378 }
1379
1380 return psz;
1381}
1382#endif
1383
1384
1385/**
1386 * Performs a register write to the given register offset.
1387 *
1388 * @returns Strict VBox status code.
1389 * @param pDevIns The device instance.
1390 * @param pThis The shared UART core instance data.
1391 * @param pThisCC The current context UART core instance data.
1392 * @param uReg The register offset (byte offset) to start writing to.
1393 * @param u32 The value to write.
1394 * @param cb Number of bytes to write.
1395 */
1396DECLHIDDEN(VBOXSTRICTRC) uartRegWrite(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC,
1397 uint32_t uReg, uint32_t u32, size_t cb)
1398{
1399 AssertMsgReturn(cb == 1, ("uReg=%#x cb=%d u32=%#x\n", uReg, cb, u32), VINF_SUCCESS);
1400
1401 VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VINF_IOM_R3_IOPORT_WRITE);
1402 if (rc == VINF_SUCCESS)
1403 {
1404 uint8_t idxReg = uReg & 0x7;
1405 LogFlowFunc(("pThis=%#p uReg=%u{%s} u32=%#x cb=%u\n",
1406 pThis, uReg, uartRegIdx2Str(pThis, idxReg, true /*fWrite*/), u32, cb));
1407
1408 uint8_t uVal = (uint8_t)u32;
1409 switch (idxReg)
1410 {
1411 case UART_REG_THR_DLL_INDEX:
1412 rc = uartRegThrDllWrite(pDevIns, pThis, pThisCC, uVal);
1413 break;
1414 case UART_REG_IER_DLM_INDEX:
1415 rc = uartRegIerDlmWrite(pDevIns, pThis, pThisCC, uVal);
1416 break;
1417 case UART_REG_FCR_INDEX:
1418 rc = uartRegFcrWrite(pDevIns, pThis, pThisCC, uVal);
1419 break;
1420 case UART_REG_LCR_INDEX:
1421 rc = uartRegLcrWrite(pDevIns, pThis, pThisCC, uVal);
1422 break;
1423 case UART_REG_MCR_INDEX:
1424 rc = uartRegMcrWrite(pDevIns, pThis, pThisCC, uVal);
1425 break;
1426 case UART_REG_SCR_INDEX:
1427 pThis->uRegScr = uVal;
1428 break;
1429 default:
1430 break;
1431 }
1432
1433 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1434 }
1435 LogFlowFunc(("-> %Rrc\n", VBOXSTRICTRC_VAL(rc)));
1436 return rc;
1437}
1438
1439
1440/**
1441 * Performs a register read from the given register offset.
1442 *
1443 * @returns VBox status code.
1444 * @param pDevIns The device instance.
1445 * @param pThis The shared UART core instance data.
1446 * @param pThisCC The current context UART core instance data.
1447 * @param uReg The register offset (byte offset) to start reading from.
1448 * @param pu32 Where to store the read value.
1449 * @param cb Number of bytes to read.
1450 */
1451DECLHIDDEN(VBOXSTRICTRC) uartRegRead(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC,
1452 uint32_t uReg, uint32_t *pu32, size_t cb)
1453{
1454 if (cb != 1)
1455 return VERR_IOM_IOPORT_UNUSED;
1456
1457 VBOXSTRICTRC rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VINF_IOM_R3_IOPORT_READ);
1458 if (rc == VINF_SUCCESS)
1459 {
1460 uint8_t idxReg = uReg & 0x7;
1461 switch (idxReg)
1462 {
1463 case UART_REG_RBR_DLL_INDEX:
1464 rc = uartRegRbrDllRead(pDevIns, pThis, pThisCC, pu32);
1465 break;
1466 case UART_REG_IER_DLM_INDEX:
1467 uartRegIerDlmRead(pThis, pu32);
1468 break;
1469 case UART_REG_IIR_INDEX:
1470 uartRegIirRead(pDevIns, pThis, pThisCC, pu32);
1471 break;
1472 case UART_REG_LCR_INDEX:
1473 *pu32 = pThis->uRegLcr;
1474 break;
1475 case UART_REG_MCR_INDEX:
1476 *pu32 = pThis->uRegMcr;
1477 break;
1478 case UART_REG_LSR_INDEX:
1479 rc = uartRegLsrRead(pDevIns, pThis, pThisCC, pu32);
1480 break;
1481 case UART_REG_MSR_INDEX:
1482 uartRegMsrRead(pDevIns, pThis, pThisCC, pu32);
1483 break;
1484 case UART_REG_SCR_INDEX:
1485 *pu32 = pThis->uRegScr;
1486 break;
1487 default:
1488 rc = VERR_IOM_IOPORT_UNUSED;
1489 }
1490 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1491 LogFlowFunc(("pThis=%#p uReg=%u{%s} u32=%#x cb=%u -> %Rrc\n",
1492 pThis, uReg, uartRegIdx2Str(pThis, idxReg, false /*fWrite*/), *pu32, cb, VBOXSTRICTRC_VAL(rc)));
1493 }
1494 else
1495 LogFlowFunc(("-> %Rrc\n", VBOXSTRICTRC_VAL(rc)));
1496 return rc;
1497}
1498
1499
1500#ifdef IN_RING3
1501
1502/* -=-=-=-=-=-=-=-=- Timer callbacks -=-=-=-=-=-=-=-=- */
1503
1504/**
1505 * @callback_method_impl{FNTMTIMERDEV, Fifo timer function.}
1506 */
1507static DECLCALLBACK(void) uartR3RcvFifoTimeoutTimer(PPDMDEVINS pDevIns, TMTIMERHANDLE hTimer, void *pvUser)
1508{
1509 LogFlowFunc(("pDevIns=%#p hTimer=%#p pvUser=%#p\n", pDevIns, hTimer, pvUser));
1510 PUARTCORER3 pThisCC = (PUARTCORECC)pvUser;
1511 PUARTCORE pThis = pThisCC->pShared;
1512 RT_NOREF(hTimer);
1513
1514 if (pThis->FifoRecv.cbUsed < pThis->FifoRecv.cbItl)
1515 {
1516 pThis->fIrqCtiPending = true;
1517 uartIrqUpdate(pDevIns, pThis, pThisCC);
1518 }
1519}
1520
1521/**
1522 * @callback_method_impl{FNTMTIMERDEV,
1523 * TX timer function when there is no driver connected for
1524 * draining the THR/FIFO.}
1525 */
1526static DECLCALLBACK(void) uartR3TxUnconnectedTimer(PPDMDEVINS pDevIns, TMTIMERHANDLE hTimer, void *pvUser)
1527{
1528 LogFlowFunc(("pDevIns=%#p hTimer=%#p pvUser=%#p\n", pDevIns, hTimer, pvUser));
1529 PUARTCORER3 pThisCC = (PUARTCORECC)pvUser;
1530 PUARTCORE pThis = pThisCC->pShared;
1531 Assert(hTimer == pThis->hTimerTxUnconnected);
1532
1533 VBOXSTRICTRC rc1 = PDMDevHlpTimerLockClock2(pDevIns, hTimer, &pThis->CritSect, VINF_SUCCESS /* must get it */);
1534 AssertRCReturnVoid(VBOXSTRICTRC_VAL(rc1));
1535
1536 uint8_t bVal = 0;
1537 size_t cbRead = 0;
1538 uartR3TxQueueCopyFrom(pDevIns, pThis, pThisCC, &bVal, sizeof(bVal), &cbRead);
1539 if (pThis->uRegMcr & UART_REG_MCR_LOOP)
1540 {
1541 /* Loopback mode is active, feed in the data at the receiving end. */
1542 uint32_t cbAvailOld = ASMAtomicAddU32(&pThis->cbAvailRdr, 1);
1543 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
1544 {
1545 PUARTFIFO pFifo = &pThis->FifoRecv;
1546 if (uartFifoFreeGet(pFifo) > 0)
1547 {
1548 pFifo->abBuf[pFifo->offWrite] = bVal;
1549 pFifo->offWrite = (pFifo->offWrite + 1) % pFifo->cbMax;
1550 pFifo->cbUsed++;
1551
1552 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
1553 if (pFifo->cbUsed < pFifo->cbItl)
1554 {
1555 pThis->fIrqCtiPending = false;
1556 PDMDevHlpTimerSetRelative(pDevIns, pThis->hTimerRcvFifoTimeout,
1557 pThis->cSymbolXferTicks * 4, NULL);
1558 }
1559 uartIrqUpdate(pDevIns, pThis, pThisCC);
1560 }
1561
1562 ASMAtomicSubU32(&pThis->cbAvailRdr, 1);
1563 }
1564 else if (!cbAvailOld)
1565 {
1566 pThis->uRegRbr = bVal;
1567 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
1568 uartIrqUpdate(pDevIns, pThis, pThisCC);
1569 }
1570 else
1571 ASMAtomicSubU32(&pThis->cbAvailRdr, 1);
1572 }
1573
1574 if (cbRead == 1)
1575 PDMDevHlpTimerSetRelative(pDevIns, hTimer, pThis->cSymbolXferTicks, NULL);
1576 else
1577 {
1578 /* NO data left, set the transmitter holding register as empty. */
1579 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_TEMT);
1580 }
1581
1582 PDMDevHlpTimerUnlockClock2(pDevIns, hTimer, &pThis->CritSect);
1583}
1584
1585
1586/* -=-=-=-=-=-=-=-=- PDMISERIALPORT on LUN#0 -=-=-=-=-=-=-=-=- */
1587
1588
1589/**
1590 * @interface_method_impl{PDMISERIALPORT,pfnDataAvailRdrNotify}
1591 */
1592static DECLCALLBACK(int) uartR3DataAvailRdrNotify(PPDMISERIALPORT pInterface, size_t cbAvail)
1593{
1594 LogFlowFunc(("pInterface=%#p cbAvail=%zu\n", pInterface, cbAvail));
1595 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, ISerialPort);
1596 PUARTCORE pThis = pThisCC->pShared;
1597 PPDMDEVINS pDevIns = pThisCC->pDevIns;
1598
1599 AssertMsg((uint32_t)cbAvail == cbAvail, ("Too much data available\n"));
1600
1601 int rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1602 AssertRCReturn(rcLock, rcLock);
1603
1604 uint32_t cbAvailOld = ASMAtomicAddU32(&pThis->cbAvailRdr, (uint32_t)cbAvail);
1605 LogFlow((" cbAvailRdr=%u -> cbAvailRdr=%u\n", cbAvailOld, cbAvail + cbAvailOld));
1606 if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
1607 uartR3RecvFifoFill(pDevIns, pThis, pThisCC);
1608 else if (!cbAvailOld)
1609 {
1610 size_t cbRead = 0;
1611 int rc = pThisCC->pDrvSerial->pfnReadRdr(pThisCC->pDrvSerial, &pThis->uRegRbr, 1, &cbRead);
1612 AssertRC(rc);
1613
1614 if (cbRead)
1615 {
1616 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
1617 uartIrqUpdate(pDevIns, pThis, pThisCC);
1618 }
1619 }
1620
1621 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1622 return VINF_SUCCESS;
1623}
1624
1625
1626/**
1627 * @interface_method_impl{PDMISERIALPORT,pfnDataSentNotify}
1628 */
1629static DECLCALLBACK(int) uartR3DataSentNotify(PPDMISERIALPORT pInterface)
1630{
1631 LogFlowFunc(("pInterface=%#p\n", pInterface));
1632 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, ISerialPort);
1633 PUARTCORE pThis = pThisCC->pShared;
1634 PPDMDEVINS pDevIns = pThisCC->pDevIns;
1635
1636 /* Set the transmitter empty bit because everything was sent. */
1637 int const rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1638 AssertRCReturn(rcLock, rcLock);
1639
1640 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_TEMT);
1641 uartIrqUpdate(pDevIns, pThis, pThisCC);
1642
1643 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1644 return VINF_SUCCESS;
1645}
1646
1647
1648/**
1649 * @interface_method_impl{PDMISERIALPORT,pfnReadWr}
1650 */
1651static DECLCALLBACK(int) uartR3ReadWr(PPDMISERIALPORT pInterface, void *pvBuf, size_t cbRead, size_t *pcbRead)
1652{
1653 LogFlowFunc(("pInterface=%#p pvBuf=%#p cbRead=%zu pcbRead=%#p\n", pInterface, pvBuf, cbRead, pcbRead));
1654 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, ISerialPort);
1655 PUARTCORE pThis = pThisCC->pShared;
1656 PPDMDEVINS pDevIns = pThisCC->pDevIns;
1657
1658 AssertReturn(cbRead > 0, VERR_INVALID_PARAMETER);
1659
1660 int const rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1661 AssertRCReturn(rcLock, rcLock);
1662
1663 uartR3TxQueueCopyFrom(pDevIns, pThis, pThisCC, pvBuf, cbRead, pcbRead);
1664
1665 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1666 LogFlowFunc(("-> VINF_SUCCESS{*pcbRead=%zu}\n", *pcbRead));
1667 return VINF_SUCCESS;
1668}
1669
1670
1671/**
1672 * @interface_method_impl{PDMISERIALPORT,pfnNotifyStsLinesChanged}
1673 */
1674static DECLCALLBACK(int) uartR3NotifyStsLinesChanged(PPDMISERIALPORT pInterface, uint32_t fNewStatusLines)
1675{
1676 LogFlowFunc(("pInterface=%#p fNewStatusLines=%#x\n", pInterface, fNewStatusLines));
1677 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, ISerialPort);
1678 PUARTCORE pThis = pThisCC->pShared;
1679 PPDMDEVINS pDevIns = pThisCC->pDevIns;
1680 int const rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1681 AssertRCReturn(rcLock, rcLock);
1682
1683 uartR3StsLinesUpdate(pDevIns, pThis, pThisCC, fNewStatusLines);
1684
1685 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1686 return VINF_SUCCESS;
1687}
1688
1689
1690/**
1691 * @interface_method_impl{PDMISERIALPORT,pfnNotifyBrk}
1692 */
1693static DECLCALLBACK(int) uartR3NotifyBrk(PPDMISERIALPORT pInterface)
1694{
1695 LogFlowFunc(("pInterface=%#p\n", pInterface));
1696 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, ISerialPort);
1697 PUARTCORE pThis = pThisCC->pShared;
1698 PPDMDEVINS pDevIns = pThisCC->pDevIns;
1699 int const rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1700 AssertRCReturn(rcLock, rcLock);
1701
1702 UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_BI);
1703 uartIrqUpdate(pDevIns, pThis, pThisCC);
1704
1705 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1706 return VINF_SUCCESS;
1707}
1708
1709
1710/* -=-=-=-=-=-=-=-=- PDMIBASE -=-=-=-=-=-=-=-=- */
1711
1712/**
1713 * @interface_method_impl{PDMIBASE,pfnQueryInterface}
1714 */
1715static DECLCALLBACK(void *) uartR3QueryInterface(PPDMIBASE pInterface, const char *pszIID)
1716{
1717 PUARTCORECC pThisCC = RT_FROM_MEMBER(pInterface, UARTCORECC, IBase);
1718 PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->IBase);
1719 PDMIBASE_RETURN_INTERFACE(pszIID, PDMISERIALPORT, &pThisCC->ISerialPort);
1720 return NULL;
1721}
1722
1723
1724/**
1725 * Saves the UART state to the given SSM handle.
1726 *
1727 * @returns VBox status code.
1728 * @param pDevIns The device instance.
1729 * @param pThis The UART core instance.
1730 * @param pSSM The SSM handle to save to.
1731 */
1732DECLHIDDEN(int) uartR3SaveExec(PPDMDEVINS pDevIns, PUARTCORE pThis, PSSMHANDLE pSSM)
1733{
1734 PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
1735
1736 pHlp->pfnSSMPutU16(pSSM, pThis->uRegDivisor);
1737 pHlp->pfnSSMPutU8(pSSM, pThis->uRegRbr);
1738 pHlp->pfnSSMPutU8(pSSM, pThis->uRegThr);
1739 pHlp->pfnSSMPutU8(pSSM, pThis->uRegIer);
1740 pHlp->pfnSSMPutU8(pSSM, pThis->uRegIir);
1741 pHlp->pfnSSMPutU8(pSSM, pThis->uRegFcr);
1742 pHlp->pfnSSMPutU8(pSSM, pThis->uRegLcr);
1743 pHlp->pfnSSMPutU8(pSSM, pThis->uRegMcr);
1744 pHlp->pfnSSMPutU8(pSSM, pThis->uRegLsr);
1745 pHlp->pfnSSMPutU8(pSSM, pThis->uRegMsr);
1746 pHlp->pfnSSMPutU8(pSSM, pThis->uRegScr);
1747 pHlp->pfnSSMPutBool(pSSM, pThis->fIrqCtiPending);
1748 pHlp->pfnSSMPutBool(pSSM, pThis->fThreEmptyPending);
1749 pHlp->pfnSSMPutU8(pSSM, pThis->FifoXmit.cbMax);
1750 pHlp->pfnSSMPutU8(pSSM, pThis->FifoXmit.cbItl);
1751 pHlp->pfnSSMPutU8(pSSM, pThis->FifoRecv.cbMax);
1752 pHlp->pfnSSMPutU8(pSSM, pThis->FifoRecv.cbItl);
1753
1754 int rc = PDMDevHlpTimerSave(pDevIns, pThis->hTimerRcvFifoTimeout, pSSM);
1755 if (RT_SUCCESS(rc))
1756 rc = PDMDevHlpTimerSave(pDevIns, pThis->hTimerTxUnconnected, pSSM);
1757
1758 return rc;
1759}
1760
1761
1762/**
1763 * Loads the UART state from the given SSM handle.
1764 *
1765 * @returns VBox status code.
1766 * @param pDevIns The device instance.
1767 * @param pThis The UART core instance.
1768 * @param pSSM The SSM handle to load from.
1769 * @param uVersion Saved state version.
1770 * @param uPass The SSM pass the call is done in.
1771 * @param pbIrq Where to store the IRQ value for legacy
1772 * saved states - optional.
1773 * @param pPortBase Where to store the I/O port base for legacy
1774 * saved states - optional.
1775 */
1776DECLHIDDEN(int) uartR3LoadExec(PPDMDEVINS pDevIns, PUARTCORE pThis, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass,
1777 uint8_t *pbIrq, RTIOPORT *pPortBase)
1778{
1779 PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
1780 int rc;
1781 RT_NOREF(uPass);
1782
1783 if (uVersion > UART_SAVED_STATE_VERSION_LEGACY_CODE)
1784 {
1785 pHlp->pfnSSMGetU16(pSSM, &pThis->uRegDivisor);
1786 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegRbr);
1787 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegThr);
1788 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegIer);
1789 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegIir);
1790 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegFcr);
1791 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegLcr);
1792 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegMcr);
1793 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegLsr);
1794 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegMsr);
1795 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegScr);
1796 pHlp->pfnSSMGetBool(pSSM, &pThis->fIrqCtiPending);
1797 pHlp->pfnSSMGetBool(pSSM, &pThis->fThreEmptyPending);
1798 pHlp->pfnSSMGetU8(pSSM, &pThis->FifoXmit.cbMax);
1799 pHlp->pfnSSMGetU8(pSSM, &pThis->FifoXmit.cbItl);
1800 pHlp->pfnSSMGetU8(pSSM, &pThis->FifoRecv.cbMax);
1801 pHlp->pfnSSMGetU8(pSSM, &pThis->FifoRecv.cbItl);
1802
1803 rc = PDMDevHlpTimerLoad(pDevIns, pThis->hTimerRcvFifoTimeout, pSSM);
1804 if (uVersion > UART_SAVED_STATE_VERSION_PRE_UNCONNECTED_TX_TIMER)
1805 rc = PDMDevHlpTimerLoad(pDevIns, pThis->hTimerTxUnconnected, pSSM);
1806 }
1807 else
1808 {
1809 AssertPtr(pbIrq);
1810 AssertPtr(pPortBase);
1811 if (uVersion == UART_SAVED_STATE_VERSION_16450)
1812 {
1813 pThis->enmType = UARTTYPE_16450;
1814 LogRel(("Serial#%d: falling back to 16450 mode from load state\n", pDevIns->iInstance));
1815 }
1816
1817 pHlp->pfnSSMGetU16(pSSM, &pThis->uRegDivisor);
1818 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegRbr);
1819 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegIer);
1820 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegLcr);
1821 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegMcr);
1822 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegLsr);
1823 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegMsr);
1824 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegScr);
1825 if (uVersion > UART_SAVED_STATE_VERSION_16450)
1826 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegFcr);
1827
1828 int32_t iTmp = 0;
1829 pHlp->pfnSSMGetS32(pSSM, &iTmp);
1830 pThis->fThreEmptyPending = RT_BOOL(iTmp);
1831
1832 rc = pHlp->pfnSSMGetS32(pSSM, &iTmp);
1833 AssertRCReturn(rc, rc);
1834 *pbIrq = (uint8_t)iTmp;
1835
1836 pHlp->pfnSSMSkip(pSSM, sizeof(int32_t)); /* was: last_break_enable */
1837
1838 uint32_t uPortBaseTmp = 0;
1839 rc = pHlp->pfnSSMGetU32(pSSM, &uPortBaseTmp);
1840 AssertRCReturn(rc, rc);
1841 *pPortBase = (RTIOPORT)uPortBaseTmp;
1842
1843 rc = pHlp->pfnSSMSkip(pSSM, sizeof(bool)); /* was: msr_changed */
1844 if ( RT_SUCCESS(rc)
1845 && uVersion > UART_SAVED_STATE_VERSION_MISSING_BITS)
1846 {
1847 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegThr);
1848 pHlp->pfnSSMSkip(pSSM, sizeof(uint8_t)); /* The old transmit shift register, not used anymore. */
1849 pHlp->pfnSSMGetU8(pSSM, &pThis->uRegIir);
1850
1851 int32_t iTimeoutPending = 0;
1852 pHlp->pfnSSMGetS32(pSSM, &iTimeoutPending);
1853 pThis->fIrqCtiPending = RT_BOOL(iTimeoutPending);
1854
1855 rc = PDMDevHlpTimerLoad(pDevIns, pThis->hTimerRcvFifoTimeout, pSSM);
1856 AssertRCReturn(rc, rc);
1857
1858 bool fWasActiveIgn;
1859 rc = pHlp->pfnTimerSkipLoad(pSSM, &fWasActiveIgn); /* was: transmit_timerR3 */
1860 AssertRCReturn(rc, rc);
1861
1862 pHlp->pfnSSMGetU8(pSSM, &pThis->FifoRecv.cbItl);
1863 rc = pHlp->pfnSSMGetU8(pSSM, &pThis->FifoRecv.cbItl);
1864 }
1865 }
1866
1867 return rc;
1868}
1869
1870
1871/**
1872 * Called when loading the state completed, updates the parameters of any driver underneath.
1873 *
1874 * @returns VBox status code.
1875 * @param pDevIns The device instance.
1876 * @param pThis The shared serial port instance data.
1877 * @param pThisCC The serial port instance data for the current context.
1878 * @param pSSM The SSM handle.
1879 */
1880DECLHIDDEN(int) uartR3LoadDone(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, PSSMHANDLE pSSM)
1881{
1882 RT_NOREF(pSSM);
1883
1884 uartR3ParamsUpdate(pDevIns, pThis, pThisCC);
1885 uartIrqUpdate(pDevIns, pThis, pThisCC);
1886
1887 if (pThisCC->pDrvSerial)
1888 {
1889 /* Set the modem lines to reflect the current state. */
1890 int rc = pThisCC->pDrvSerial->pfnChgModemLines(pThisCC->pDrvSerial,
1891 RT_BOOL(pThis->uRegMcr & UART_REG_MCR_RTS),
1892 RT_BOOL(pThis->uRegMcr & UART_REG_MCR_DTR));
1893 if (RT_FAILURE(rc))
1894 LogRel(("Serial#%d: Failed to set modem lines with %Rrc during saved state load\n",
1895 pDevIns->iInstance, rc));
1896
1897 uint32_t fStsLines = 0;
1898 rc = pThisCC->pDrvSerial->pfnQueryStsLines(pThisCC->pDrvSerial, &fStsLines);
1899 if (RT_SUCCESS(rc))
1900 uartR3StsLinesUpdate(pDevIns, pThis, pThisCC, fStsLines);
1901 else
1902 LogRel(("Serial#%d: Failed to query status line status with %Rrc during reset\n",
1903 pDevIns->iInstance, rc));
1904 }
1905
1906 return VINF_SUCCESS;
1907}
1908
1909
1910/**
1911 * Resets the given UART core instance.
1912 *
1913 * @param pDevIns The device instance.
1914 * @param pThis The shared serial port instance data.
1915 * @param pThisCC The serial port instance data for the current context.
1916 */
1917DECLHIDDEN(void) uartR3Reset(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
1918{
1919 pThis->uRegDivisor = 0x0c; /* Default to 9600 Baud. */
1920 pThis->uRegRbr = 0;
1921 pThis->uRegThr = 0;
1922 pThis->uRegIer = 0;
1923 pThis->uRegIir = UART_REG_IIR_IP_NO_INT;
1924 pThis->uRegFcr = 0;
1925 pThis->uRegLcr = 0; /* 5 data bits, no parity, 1 stop bit. */
1926 pThis->uRegMcr = 0;
1927 pThis->uRegLsr = UART_REG_LSR_THRE | UART_REG_LSR_TEMT;
1928 pThis->uRegMsr = UART_REG_MSR_DCD | UART_REG_MSR_CTS | UART_REG_MSR_DSR | UART_REG_MSR_DCTS | UART_REG_MSR_DDSR | UART_REG_MSR_DDCD;
1929 pThis->uRegScr = 0;
1930 pThis->fIrqCtiPending = false;
1931 pThis->fThreEmptyPending = true;
1932
1933 /* Standard FIFO size for 15550A. */
1934 pThis->FifoXmit.cbMax = 16;
1935 pThis->FifoRecv.cbMax = 16;
1936 pThis->FifoRecv.cbItl = 1;
1937
1938 uartR3XferReset(pDevIns, pThis, pThisCC);
1939}
1940
1941
1942/**
1943 * Attaches the given UART core instance to the drivers at the given LUN.
1944 *
1945 * @returns VBox status code.
1946 * @param pDevIns The device instance.
1947 * @param pThis The shared serial port instance data.
1948 * @param pThisCC The serial port instance data for the current context.
1949 * @param iLUN The LUN being attached.
1950 */
1951DECLHIDDEN(int) uartR3Attach(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC, unsigned iLUN)
1952{
1953 int rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThisCC->IBase, &pThisCC->pDrvBase, "Serial Char");
1954 if (RT_SUCCESS(rc))
1955 {
1956 pThisCC->pDrvSerial = PDMIBASE_QUERY_INTERFACE(pThisCC->pDrvBase, PDMISERIALCONNECTOR);
1957 if (!pThisCC->pDrvSerial)
1958 {
1959 AssertLogRelMsgFailed(("Configuration error: instance %d has no serial interface!\n", pDevIns->iInstance));
1960 return VERR_PDM_MISSING_INTERFACE;
1961 }
1962 rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1963 if (RT_SUCCESS(rc))
1964 {
1965 uartR3XferReset(pDevIns, pThis, pThisCC);
1966 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1967 }
1968 }
1969 else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
1970 {
1971 pThisCC->pDrvBase = NULL;
1972 pThisCC->pDrvSerial = NULL;
1973 rc = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
1974 if (RT_SUCCESS(rc))
1975 {
1976 uartR3XferReset(pDevIns, pThis, pThisCC);
1977 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
1978 }
1979 LogRel(("Serial#%d: no unit\n", pDevIns->iInstance));
1980 }
1981 else /* Don't call VMSetError here as we assume that the driver already set an appropriate error */
1982 LogRel(("Serial#%d: Failed to attach to serial driver. rc=%Rrc\n", pDevIns->iInstance, rc));
1983
1984 return rc;
1985}
1986
1987
1988/**
1989 * Detaches any attached driver from the given UART core instance.
1990 *
1991 * @param pDevIns The device instance.
1992 * @param pThis The shared serial port instance data.
1993 * @param pThisCC The serial port instance data for the current context.
1994 */
1995DECLHIDDEN(void) uartR3Detach(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC)
1996{
1997 /* Zero out important members. */
1998 pThisCC->pDrvBase = NULL;
1999 pThisCC->pDrvSerial = NULL;
2000 int const rcLock = PDMDevHlpCritSectEnter(pDevIns, &pThis->CritSect, VERR_IGNORED);
2001 PDM_CRITSECT_RELEASE_ASSERT_RC_DEV(pDevIns, &pThis->CritSect, rcLock);
2002
2003 uartR3XferReset(pDevIns, pThis, pThisCC);
2004
2005 PDMDevHlpCritSectLeave(pDevIns, &pThis->CritSect);
2006}
2007
2008
2009/**
2010 * Destroys the given UART core instance freeing all allocated resources.
2011 *
2012 * @param pDevIns The device instance.
2013 * @param pThis The shared UART core instance data..
2014 */
2015DECLHIDDEN(void) uartR3Destruct(PPDMDEVINS pDevIns, PUARTCORE pThis)
2016{
2017 PDMDevHlpCritSectDelete(pDevIns, &pThis->CritSect);
2018}
2019
2020
2021/**
2022 * Initializes the given UART core instance using the provided configuration.
2023 *
2024 * @returns VBox status code.
2025 * @param pDevIns The device instance pointer.
2026 * @param pThis The shared UART core instance data to
2027 * initialize.
2028 * @param pThisCC The ring-3 UART core instance data to
2029 * initialize.
2030 * @param enmType The type of UART emulated.
2031 * @param iLUN The LUN the UART should look for attached drivers.
2032 * @param fFlags Additional flags controlling device behavior.
2033 * @param pfnUartIrqReq Pointer to the interrupt request callback.
2034 */
2035DECLHIDDEN(int) uartR3Init(PPDMDEVINS pDevIns, PUARTCORE pThis, PUARTCORECC pThisCC,
2036 UARTTYPE enmType, unsigned iLUN, uint32_t fFlags, PFNUARTCOREIRQREQ pfnUartIrqReq)
2037{
2038 /*
2039 * Initialize the instance data.
2040 * (Do this early or the destructor might choke on something!)
2041 */
2042 pThis->iLUN = iLUN;
2043 pThis->enmType = enmType;
2044 pThis->fFlags = fFlags;
2045
2046 pThisCC->iLUN = iLUN;
2047 pThisCC->pDevIns = pDevIns;
2048 pThisCC->pShared = pThis;
2049 pThisCC->pfnUartIrqReq = pfnUartIrqReq;
2050
2051 /* IBase */
2052 pThisCC->IBase.pfnQueryInterface = uartR3QueryInterface;
2053
2054 /* ISerialPort */
2055 pThisCC->ISerialPort.pfnDataAvailRdrNotify = uartR3DataAvailRdrNotify;
2056 pThisCC->ISerialPort.pfnDataSentNotify = uartR3DataSentNotify;
2057 pThisCC->ISerialPort.pfnReadWr = uartR3ReadWr;
2058 pThisCC->ISerialPort.pfnNotifyStsLinesChanged = uartR3NotifyStsLinesChanged;
2059 pThisCC->ISerialPort.pfnNotifyBrk = uartR3NotifyBrk;
2060
2061 int rc = PDMDevHlpCritSectInit(pDevIns, &pThis->CritSect, RT_SRC_POS, "Uart{%s#%d}#%d",
2062 pDevIns->pReg->szName, pDevIns->iInstance, iLUN);
2063 AssertRCReturn(rc, rc);
2064
2065 /*
2066 * Attach the char driver and get the interfaces.
2067 */
2068 rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThisCC->IBase, &pThisCC->pDrvBase, "UART");
2069 if (RT_SUCCESS(rc))
2070 {
2071 pThisCC->pDrvSerial = PDMIBASE_QUERY_INTERFACE(pThisCC->pDrvBase, PDMISERIALCONNECTOR);
2072 if (!pThisCC->pDrvSerial)
2073 {
2074 AssertLogRelMsgFailed(("Configuration error: instance %d has no serial interface!\n", iLUN));
2075 return VERR_PDM_MISSING_INTERFACE;
2076 }
2077 }
2078 else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
2079 {
2080 pThisCC->pDrvBase = NULL;
2081 pThisCC->pDrvSerial = NULL;
2082 LogRel(("Serial#%d: no unit\n", iLUN));
2083 }
2084 else
2085 {
2086 AssertLogRelMsgFailed(("Serial#%d: Failed to attach to char driver. rc=%Rrc\n", iLUN, rc));
2087 /* Don't call VMSetError here as we assume that the driver already set an appropriate error */
2088 return rc;
2089 }
2090
2091 /*
2092 * Create the receive FIFO character timeout indicator timer.
2093 */
2094 rc = PDMDevHlpTimerCreate(pDevIns, TMCLOCK_VIRTUAL, uartR3RcvFifoTimeoutTimer, pThisCC,
2095 TMTIMER_FLAGS_NO_CRIT_SECT | TMTIMER_FLAGS_RING0, "UART Rcv FIFO",
2096 &pThis->hTimerRcvFifoTimeout);
2097 AssertRCReturn(rc, rc);
2098
2099 rc = PDMDevHlpTimerSetCritSect(pDevIns, pThis->hTimerRcvFifoTimeout, &pThis->CritSect);
2100 AssertRCReturn(rc, rc);
2101
2102 /*
2103 * Create the transmit timer when no device is connected.
2104 */
2105 rc = PDMDevHlpTimerCreate(pDevIns, TMCLOCK_VIRTUAL_SYNC, uartR3TxUnconnectedTimer, pThisCC,
2106 TMTIMER_FLAGS_NO_CRIT_SECT | TMTIMER_FLAGS_NO_RING0, "UART TX unconnect",
2107 &pThis->hTimerTxUnconnected);
2108 AssertRCReturn(rc, rc);
2109
2110 uartR3Reset(pDevIns, pThis, pThisCC);
2111 return VINF_SUCCESS;
2112}
2113
2114#else /* !IN_RING3 */
2115
2116/**
2117 * Initializes the ring-0 / raw-mode instance data.
2118 *
2119 * @returns VBox status code.
2120 * @param pThisCC The serial port instance data for the current context.
2121 * @param pfnUartIrqReq Pointer to the interrupt request callback.
2122 */
2123DECLHIDDEN(int) uartRZInit(PUARTCORECC pThisCC, PFNUARTCOREIRQREQ pfnUartIrqReq)
2124{
2125 AssertPtrReturn(pfnUartIrqReq, VERR_INVALID_POINTER);
2126 AssertPtrReturn(pThisCC, VERR_INVALID_POINTER);
2127 pThisCC->pfnUartIrqReq = pfnUartIrqReq;
2128 return VINF_SUCCESS;
2129}
2130
2131#endif /* !IN_RING3 */
2132
2133#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette