VirtualBox

source: vbox/trunk/src/VBox/Devices/PC/BIOS/ata.c@ 89364

Last change on this file since 89364 was 89364, checked in by vboxsync, 3 years ago

Devices/PC/BIOS: Remove the skip_b,skip_a mechanism as it is unused now making the device drivers lss complex, bugref:4841
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 41.7 KB
Line 
1/* $Id: ata.c 89364 2021-05-28 15:44:38Z vboxsync $ */
2/** @file
3 * PC BIOS - ATA disk support.
4 */
5
6/*
7 * Copyright (C) 2006-2020 Oracle Corporation
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 * --------------------------------------------------------------------
17 *
18 * This code is based on:
19 *
20 * ROM BIOS for use with Bochs/Plex86/QEMU emulation environment
21 *
22 * Copyright (C) 2002 MandrakeSoft S.A.
23 *
24 * MandrakeSoft S.A.
25 * 43, rue d'Aboukir
26 * 75002 Paris - France
27 * http://www.linux-mandrake.com/
28 * http://www.mandrakesoft.com/
29 *
30 * This library is free software; you can redistribute it and/or
31 * modify it under the terms of the GNU Lesser General Public
32 * License as published by the Free Software Foundation; either
33 * version 2 of the License, or (at your option) any later version.
34 *
35 * This library is distributed in the hope that it will be useful,
36 * but WITHOUT ANY WARRANTY; without even the implied warranty of
37 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
38 * Lesser General Public License for more details.
39 *
40 * You should have received a copy of the GNU Lesser General Public
41 * License along with this library; if not, write to the Free Software
42 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
43 *
44 */
45
46/*
47 * Oracle LGPL Disclaimer: For the avoidance of doubt, except that if any license choice
48 * other than GPL or LGPL is available it will apply instead, Oracle elects to use only
49 * the Lesser General Public License version 2.1 (LGPLv2) at this time for any software where
50 * a choice of LGPL license versions is made available with the language indicating
51 * that LGPLv2 or any later version may be used, or where a choice of which version
52 * of the LGPL is applied is otherwise unspecified.
53 */
54
55
56#include <stdint.h>
57#include <stdarg.h>
58#include "inlines.h"
59#include "biosint.h"
60#include "ebda.h"
61#include "ata.h"
62#include "pciutil.h"
63
64
65#if DEBUG_ATA
66# define BX_DEBUG_ATA(...) BX_DEBUG(__VA_ARGS__)
67#else
68# define BX_DEBUG_ATA(...)
69#endif
70
71
72// ---------------------------------------------------------------------------
73// Start of ATA/ATAPI Driver
74// ---------------------------------------------------------------------------
75
76// ---------------------------------------------------------------------------
77// ATA/ATAPI driver : initialization
78// ---------------------------------------------------------------------------
79void BIOSCALL ata_init(void)
80{
81 uint8_t channel, device;
82 bio_dsk_t __far *bios_dsk;
83
84 bios_dsk = read_word(0x0040, 0x000E) :> &EbdaData->bdisk;
85
86 // Channels info init.
87 for (channel=0; channel<BX_MAX_ATA_INTERFACES; channel++) {
88 bios_dsk->channels[channel].iface = ATA_IFACE_NONE;
89 bios_dsk->channels[channel].iobase1 = 0x0;
90 bios_dsk->channels[channel].iobase2 = 0x0;
91 bios_dsk->channels[channel].irq = 0;
92 }
93
94 // Devices info init.
95 for (device=0; device<BX_MAX_ATA_DEVICES; device++) {
96 bios_dsk->devices[device].type = DSK_TYPE_NONE;
97 bios_dsk->devices[device].device = DSK_DEVICE_NONE;
98 bios_dsk->devices[device].removable = 0;
99 bios_dsk->devices[device].lock = 0;
100 bios_dsk->devices[device].mode = ATA_MODE_NONE;
101 bios_dsk->devices[device].blksize = 0x200;
102 bios_dsk->devices[device].translation = GEO_TRANSLATION_NONE;
103 bios_dsk->devices[device].lchs.heads = 0;
104 bios_dsk->devices[device].lchs.cylinders = 0;
105 bios_dsk->devices[device].lchs.spt = 0;
106 bios_dsk->devices[device].pchs.heads = 0;
107 bios_dsk->devices[device].pchs.cylinders = 0;
108 bios_dsk->devices[device].pchs.spt = 0;
109 bios_dsk->devices[device].sectors = 0;
110 }
111
112 // hdidmap and cdidmap init.
113 for (device=0; device<BX_MAX_STORAGE_DEVICES; device++) {
114 bios_dsk->hdidmap[device] = BX_MAX_STORAGE_DEVICES;
115 bios_dsk->cdidmap[device] = BX_MAX_STORAGE_DEVICES;
116 }
117
118 bios_dsk->hdcount = 0;
119 bios_dsk->cdcount = 0;
120}
121
122// ---------------------------------------------------------------------------
123// ATA/ATAPI driver : software reset
124// ---------------------------------------------------------------------------
125// ATA-3
126// 8.2.1 Software reset - Device 0
127
128void ata_reset(uint16_t device)
129{
130 uint16_t iobase1, iobase2;
131 uint8_t channel, slave, sn, sc;
132 uint16_t max;
133 uint16_t pdelay;
134 bio_dsk_t __far *bios_dsk;
135
136 bios_dsk = read_word(0x0040, 0x000E) :> &EbdaData->bdisk;
137 channel = device / 2;
138 slave = device % 2;
139
140 iobase1 = bios_dsk->channels[channel].iobase1;
141 iobase2 = bios_dsk->channels[channel].iobase2;
142
143 // Reset
144
145 // 8.2.1 (a) -- set SRST in DC
146 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST);
147
148 // 8.2.1 (b) -- wait for BSY
149 max=0xff;
150 while(--max>0) {
151 uint8_t status = inb(iobase1+ATA_CB_STAT);
152 if ((status & ATA_CB_STAT_BSY) != 0)
153 break;
154 }
155
156 // 8.2.1 (f) -- clear SRST
157 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
158
159 // 8.2.1 (h) -- wait for not BSY
160 max=0xffff; /* The ATA specification says that the drive may be busy for up to 30 seconds. */
161 while(--max>0) {
162 uint8_t status = inb(iobase1+ATA_CB_STAT);
163 if ((status & ATA_CB_STAT_BSY) == 0)
164 break;
165 pdelay=0xffff;
166 while (--pdelay>0) {
167 /* nothing */
168 }
169 }
170
171 if (bios_dsk->devices[device].type != DSK_TYPE_NONE) {
172 // 8.2.1 (g) -- check for sc==sn==0x01
173 // select device
174 outb(iobase1+ATA_CB_DH, slave?ATA_CB_DH_DEV1:ATA_CB_DH_DEV0);
175 sc = inb(iobase1+ATA_CB_SC);
176 sn = inb(iobase1+ATA_CB_SN);
177
178 if ( (sc==0x01) && (sn==0x01) ) {
179 // 8.2.1 (i) -- wait for DRDY
180 max = 0x10; /* Speed up for virtual drives. Disks are immediately ready, CDs never */
181 while(--max>0) {
182 uint8_t status = inb(iobase1+ATA_CB_STAT);
183 if ((status & ATA_CB_STAT_RDY) != 0)
184 break;
185 }
186 }
187 }
188
189 // Enable interrupts
190 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
191}
192
193// ---------------------------------------------------------------------------
194// ATA/ATAPI driver : execute a data-in command
195// ---------------------------------------------------------------------------
196 // returns
197 // 0 : no error
198 // 1 : BUSY bit set
199 // 2 : read error
200 // 3 : expected DRQ=1
201 // 4 : no sectors left to read/verify
202 // 5 : more sectors to read/verify
203 // 6 : no sectors left to write
204 // 7 : more sectors to write
205uint16_t ata_cmd_data_in(bio_dsk_t __far *bios_dsk, uint16_t command, uint16_t count)
206{
207 uint16_t iobase1, iobase2, blksize, mult_blk_cnt;
208 uint16_t cylinder;
209 uint8_t head;
210 uint8_t sector;
211 uint8_t device;
212 uint8_t status, mode;
213 char __far *buffer;
214
215 device = bios_dsk->drqp.dev_id;
216
217 iobase1 = bios_dsk->channels[device / 2].iobase1;
218 iobase2 = bios_dsk->channels[device / 2].iobase2;
219 mode = bios_dsk->devices[device].mode;
220 blksize = bios_dsk->devices[device].blksize;
221 if (blksize == 0) { /* If transfer size is exactly 64K */
222#if VBOX_BIOS_CPU >= 80386
223 if (mode == ATA_MODE_PIO32)
224 blksize = 0x4000;
225 else
226#endif
227 blksize = 0x8000;
228 } else {
229#if VBOX_BIOS_CPU >= 80386
230 if (mode == ATA_MODE_PIO32)
231 blksize >>= 2;
232 else
233#endif
234 blksize >>= 1;
235 }
236
237 status = inb(iobase1 + ATA_CB_STAT);
238 if (status & ATA_CB_STAT_BSY)
239 {
240 BX_DEBUG_ATA("%s: disk busy\n", __func__);
241 // Enable interrupts
242 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
243 return 1;
244 }
245
246 buffer = bios_dsk->drqp.buffer;
247 sector = bios_dsk->drqp.sector;
248 cylinder = bios_dsk->drqp.cylinder;
249 head = bios_dsk->drqp.head;
250
251 // sector will be 0 only on lba access. Convert to lba-chs
252 if (sector == 0) {
253 if (bios_dsk->drqp.lba + count >= 268435456)
254 {
255 sector = (bios_dsk->drqp.lba >> 24) & 0x00ff;
256 cylinder = (bios_dsk->drqp.lba >> 32) & 0xffff;
257 outb(iobase1 + ATA_CB_SC, (count & 0xff00) >> 8);
258 outb(iobase1 + ATA_CB_SN, sector);
259 outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
260 outb(iobase1 + ATA_CB_CH, cylinder >> 8);
261 /* Leave the bottom 24 bits as is, they are treated correctly by the
262 * LBA28 code path. */
263 }
264 sector = bios_dsk->drqp.lba & 0x000000ffL;
265 cylinder = (bios_dsk->drqp.lba >> 8) & 0x0000ffffL;
266 head = ((bios_dsk->drqp.lba >> 24) & 0x0000000fL) | 0x40;
267 }
268
269 outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
270 outb(iobase1 + ATA_CB_FR, 0x00);
271 outb(iobase1 + ATA_CB_SC, count);
272 outb(iobase1 + ATA_CB_SN, sector);
273 outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
274 outb(iobase1 + ATA_CB_CH, cylinder >> 8);
275 outb(iobase1 + ATA_CB_DH, ((device & 1) ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0) | head );
276 outb(iobase1 + ATA_CB_CMD, command);
277
278 if (command == ATA_CMD_READ_MULTIPLE || command == ATA_CMD_READ_MULTIPLE_EXT) {
279 mult_blk_cnt = count;
280 count = 1;
281 } else {
282 mult_blk_cnt = 1;
283 }
284
285 while (1) {
286 status = inb(iobase1 + ATA_CB_STAT);
287 if ( !(status & ATA_CB_STAT_BSY) )
288 break;
289 }
290
291 if (status & ATA_CB_STAT_ERR) {
292 BX_DEBUG_ATA("%s: read error\n", __func__);
293 // Enable interrupts
294 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
295 return 2;
296 } else if ( !(status & ATA_CB_STAT_DRQ) ) {
297 BX_DEBUG_ATA("%s: DRQ not set (status %02x)\n", __func__, (unsigned) status);
298 // Enable interrupts
299 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
300 return 3;
301 }
302
303 // FIXME : move seg/off translation here
304
305 int_enable(); // enable higher priority interrupts
306
307 while (1) {
308
309 // adjust if there will be an overrun. 2K max sector size
310 if (FP_OFF(buffer) >= 0xF800)
311 buffer = MK_FP(FP_SEG(buffer) + 0x80, FP_OFF(buffer) - 0x800);
312
313#if VBOX_BIOS_CPU >= 80386
314 if (mode == ATA_MODE_PIO32)
315 buffer = rep_insd(buffer, blksize, iobase1);
316 else
317#endif
318 buffer = rep_insw(buffer, blksize, iobase1);
319 bios_dsk->drqp.trsfsectors += mult_blk_cnt;
320 count--;
321 while (1) {
322 status = inb(iobase1 + ATA_CB_STAT);
323 if ( !(status & ATA_CB_STAT_BSY) )
324 break;
325 }
326 if (count == 0) {
327 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
328 != ATA_CB_STAT_RDY ) {
329 BX_DEBUG_ATA("%s: no sectors left (status %02x)\n", __func__, (unsigned) status);
330 // Enable interrupts
331 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
332 return 4;
333 }
334 break;
335 }
336 else {
337 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
338 != (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
339 BX_DEBUG_ATA("%s: more sectors left (status %02x)\n", __func__, (unsigned) status);
340 // Enable interrupts
341 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
342 return 5;
343 }
344 continue;
345 }
346 }
347 // Enable interrupts
348 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
349 return 0;
350}
351
352// ---------------------------------------------------------------------------
353// ATA/ATAPI driver : device detection
354// ---------------------------------------------------------------------------
355
356int ata_signature(uint16_t iobase1, uint8_t channel, uint8_t slave)
357{
358 int dsk_type = DSK_TYPE_NONE;
359 uint8_t sc, sn, st, cl, ch;
360
361 /*
362 * Wait for BSY=0 so that the signature can be read. We already determined that
363 * an ATA interface is present, and rely on the fact that for non-existent
364 * devices, the BSY bit will always be clear.
365 */
366 outb(iobase1+ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
367 do {
368 st = inb(iobase1+ATA_CB_STAT);
369 } while (st & ATA_CB_STAT_BSY);
370
371 /*
372 * Look for ATA/ATAPI signature. Fun Fact #1: If there's a Device 1 but no
373 * Device 0, Device 1 can't tell and does not respond for it. Accessing
374 * non-existent Device 0 behaves the same regardless of whether Device 1
375 * is present or not.
376 */
377 sc = inb(iobase1+ATA_CB_SC);
378 sn = inb(iobase1+ATA_CB_SN);
379 if ((sc == 1) && (sn == 1)) {
380 cl = inb(iobase1+ATA_CB_CL);
381 ch = inb(iobase1+ATA_CB_CH);
382
383 /*
384 * Fun fact #2: If Device 0 responds for Device 1, an ATA device generally
385 * returns the values of its own registers, while an ATAPI device returns
386 * zeros. In both cases, the Status register is read as zero.
387 */
388 if ((cl == 0x14) && (ch == 0xEB)) {
389 dsk_type = DSK_TYPE_ATAPI;
390 BX_DEBUG_ATA("ata%d-%d: ATAPI device\n", channel, slave);
391 } else if ((cl == 0) && (ch == 0)) {
392 if (st != 0) {
393 dsk_type = DSK_TYPE_ATA;
394 BX_DEBUG_ATA("ata%d-%d: ATA device\n", channel, slave);
395 } else {
396 BX_DEBUG_ATA("ata%d-%d: ATA master responding for slave\n", channel, slave);
397 }
398 } else {
399 dsk_type = DSK_TYPE_UNKNOWN;
400 BX_DEBUG_ATA("ata%d-%d: something else (%02X/%02X/%02X)\n", channel, slave, cl, ch, st);
401 }
402 } else /* Possibly ATAPI Device 0 responding for Device 1. */
403 BX_DEBUG_ATA("ata%d-%d: bad sc/sn signature (%02X/%02X)\n", channel, slave, sc, sn);
404
405 return dsk_type;
406}
407
408void BIOSCALL ata_detect(void)
409{
410 uint16_t ebda_seg = read_word(0x0040,0x000E);
411 uint8_t hdcount, cdcount, device, type;
412 uint8_t buffer[0x0200];
413 bio_dsk_t __far *bios_dsk;
414
415 /* If we have PCI support, look for an IDE controller (it has to be a PCI device)
416 * so that we can skip silly probing. If there's no PCI, assume IDE is present.
417 *
418 * Needs an internal PCI function because the Programming Interface byte can be
419 * almost anything, and we conly care about the base-class and sub-class code.
420 */
421#if VBOX_BIOS_CPU >= 80386
422 uint16_t busdevfn;
423
424 busdevfn = pci_find_class_noif(0x0101);
425 if (busdevfn == 0xffff) {
426 BX_INFO("No PCI IDE controller, not probing IDE\n");
427 return;
428 }
429#endif
430
431 bios_dsk = ebda_seg :> &EbdaData->bdisk;
432
433#if BX_MAX_ATA_INTERFACES > 0
434 bios_dsk->channels[0].iface = ATA_IFACE_ISA;
435 bios_dsk->channels[0].iobase1 = 0x1f0;
436 bios_dsk->channels[0].iobase2 = 0x3f0;
437 bios_dsk->channels[0].irq = 14;
438#endif
439#if BX_MAX_ATA_INTERFACES > 1
440 bios_dsk->channels[1].iface = ATA_IFACE_ISA;
441 bios_dsk->channels[1].iobase1 = 0x170;
442 bios_dsk->channels[1].iobase2 = 0x370;
443 bios_dsk->channels[1].irq = 15;
444#endif
445#if BX_MAX_ATA_INTERFACES > 2
446 bios_dsk->channels[2].iface = ATA_IFACE_ISA;
447 bios_dsk->channels[2].iobase1 = 0x1e8;
448 bios_dsk->channels[2].iobase2 = 0x3e0;
449 bios_dsk->channels[2].irq = 12;
450#endif
451#if BX_MAX_ATA_INTERFACES > 3
452 bios_dsk->channels[3].iface = ATA_IFACE_ISA;
453 bios_dsk->channels[3].iobase1 = 0x168;
454 bios_dsk->channels[3].iobase2 = 0x360;
455 bios_dsk->channels[3].irq = 11;
456#endif
457#if BX_MAX_ATA_INTERFACES > 4
458#error Please fill the ATA interface information
459#endif
460
461 // Device detection
462 hdcount = cdcount = 0;
463
464 for (device = 0; device < BX_MAX_ATA_DEVICES; device++) {
465 uint16_t iobase1, iobase2;
466 uint16_t retries;
467 uint8_t channel, slave;
468 uint8_t st;
469
470 channel = device / 2;
471 slave = device % 2;
472
473 iobase1 = bios_dsk->channels[channel].iobase1;
474 iobase2 = bios_dsk->channels[channel].iobase2;
475
476 /*
477 * Here we are in a tricky situation. We do not know if an ATA
478 * interface is even present at a given address. If it is present,
479 * we don't know if a device is present. We also need to consider
480 * the case of only a slave device being present, which does not
481 * respond for the missing master device. If a device is present,
482 * it may be still powering up or processing reset, which means it
483 * may be busy.
484 *
485 * If a device is busy, we can't reliably write any registers, and
486 * reads will return the Status register. If the Status register
487 * value is 0FFh, there might be no ATA controller at all, or it
488 * might be a busy drive. Fortunately we know that our own devices
489 * never return such a value when busy, and we use that knowledge
490 * to detect non-existent interfaces.
491 *
492 * We also know that our ATA interface will not return 0FFh even when
493 * no device is present on a given channel. This knowledge is handy
494 * when only a slave device exists because we won't read 0FFh and
495 * think there is no ATA interface at all.
496 */
497
498 st = inb(iobase1+ATA_CB_STAT);
499 BX_DEBUG_ATA("ata%d-%d: Status=%02X\n", channel, slave, st);
500 if (st == 0xff)
501 continue;
502
503 /*
504 * Perform a software reset by setting and clearing the SRST bit. This
505 * can be done at any time, and forces device signature into the task file
506 * registers. If present, both devices are reset at once, so we only do
507 * this once per channel.
508 */
509 if (!slave) {
510 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST);
511
512 /*
513 * Ensure reasonable SRST pulse width, but do not wait long for
514 * non-existent devices.
515 */
516 retries = 32;
517 while (--retries > 0) {
518 st = inb(iobase1+ATA_CB_STAT);
519 if (st & ATA_CB_STAT_BSY)
520 break;
521 }
522
523 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
524
525 /* After reset, device signature will be placed in registers. But
526 * executing any commands will overwrite it for Device 1. So that
527 * we don't have to reset twice, look for both Device 0 and Device 1
528 * signatures here right after reset.
529 */
530 bios_dsk->devices[device + 0].type = ata_signature(iobase1, channel, 0);
531 bios_dsk->devices[device + 1].type = ata_signature(iobase1, channel, 1);
532 }
533
534 // Enable interrupts
535 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
536
537 type = bios_dsk->devices[device].type;
538
539 // Now we send a IDENTIFY command to ATA device
540 if (type == DSK_TYPE_ATA) {
541 uint64_t sectors;
542 uint16_t cylinders, heads, spt, blksize;
543 chs_t lgeo;
544 uint8_t chsgeo_base;
545 uint8_t removable, mode;
546
547 //Temporary values to do the transfer
548 bios_dsk->devices[device].device = DSK_DEVICE_HD;
549 bios_dsk->devices[device].mode = ATA_MODE_PIO16;
550 bios_dsk->drqp.buffer = buffer;
551 bios_dsk->drqp.dev_id = device;
552
553 if (ata_cmd_data_in(bios_dsk, ATA_CMD_IDENTIFY_DEVICE, 1) !=0 )
554 BX_PANIC("ata-detect: Failed to detect ATA device\n");
555
556 removable = (*(buffer+0) & 0x80) ? 1 : 0;
557#if VBOX_BIOS_CPU >= 80386
558 mode = *(buffer+96) ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
559#else
560 mode = ATA_MODE_PIO16;
561#endif
562 blksize = 512; /* There is no sector size field any more. */
563
564 cylinders = *(uint16_t *)(buffer+(1*2)); // word 1
565 heads = *(uint16_t *)(buffer+(3*2)); // word 3
566 spt = *(uint16_t *)(buffer+(6*2)); // word 6
567
568 sectors = *(uint32_t *)(buffer+(60*2)); // word 60 and word 61
569 if (sectors == 0x0FFFFFFF) /* For disks bigger than ~128GB */
570 sectors = *(uint64_t *)(buffer+(100*2)); // words 100 to 103
571 switch (device)
572 {
573 case 0:
574 chsgeo_base = 0x1e;
575 break;
576 case 1:
577 chsgeo_base = 0x26;
578 break;
579 case 2:
580 chsgeo_base = 0x67;
581 break;
582 case 3:
583 chsgeo_base = 0x70;
584 break;
585 default:
586 chsgeo_base = 0;
587 }
588 if (chsgeo_base)
589 {
590 lgeo.cylinders = inb_cmos(chsgeo_base) + (inb_cmos(chsgeo_base + 1) << 8);
591 lgeo.heads = inb_cmos(chsgeo_base + 2);
592 lgeo.spt = inb_cmos(chsgeo_base + 7);
593 }
594 else
595 set_geom_lba(&lgeo, sectors); /* Default EDD-style translated LBA geometry. */
596
597 BX_INFO("ata%d-%d: PCHS=%u/%u/%u LCHS=%u/%u/%u\n", channel, slave,
598 cylinders, heads, spt, lgeo.cylinders, lgeo.heads, lgeo.spt);
599
600 bios_dsk->devices[device].device = DSK_DEVICE_HD;
601 bios_dsk->devices[device].removable = removable;
602 bios_dsk->devices[device].mode = mode;
603 bios_dsk->devices[device].blksize = blksize;
604 bios_dsk->devices[device].pchs.heads = heads;
605 bios_dsk->devices[device].pchs.cylinders = cylinders;
606 bios_dsk->devices[device].pchs.spt = spt;
607 bios_dsk->devices[device].sectors = sectors;
608 bios_dsk->devices[device].lchs = lgeo;
609 if (device < 2)
610 {
611 uint8_t sum, i;
612 fdpt_t __far *fdpt;
613 void __far * __far *int_vec;
614
615 if (device == 0)
616 fdpt = ebda_seg :> &EbdaData->fdpt0;
617 else
618 fdpt = ebda_seg :> &EbdaData->fdpt1;
619
620#if 0
621 /* Place the FDPT outside of conventional memory. Needed for
622 * 286 XENIX 2.1.3/2.2.1 because it completely wipes out
623 * the EBDA and low memory. Hack!
624 */
625 fdpt = MK_FP(0xE200, 0xf00);
626 fdpt += device;
627#endif
628
629 /* Set the INT 41h or 46h pointer. */
630 int_vec = MK_FP(0, (0x41 + device * 5) * sizeof(void __far *));
631 *int_vec = fdpt;
632
633 /* Update the DPT for drive 0/1 pointed to by Int41/46. This used
634 * to be done at POST time with lots of ugly assembler code, which
635 * isn't worth the effort of converting from AMI to Award CMOS
636 * format. Just do it here. */
637 fdpt->resvd1 = fdpt->resvd2 = 0;
638
639 fdpt->lcyl = lgeo.cylinders;
640 fdpt->lhead = lgeo.heads;
641 fdpt->sig = 0xa0;
642 fdpt->spt = spt;
643 fdpt->cyl = cylinders;
644 fdpt->head = heads;
645 fdpt->lspt = lgeo.spt;
646 sum = 0;
647 for (i = 0; i < 0xf; i++)
648 sum += *((uint8_t __far *)fdpt + i);
649 sum = -sum;
650 fdpt->csum = sum;
651 }
652
653 // fill hdidmap
654 bios_dsk->hdidmap[hdcount] = device;
655 hdcount++;
656 }
657
658 // Now we send an IDENTIFY command to ATAPI device
659 if (type == DSK_TYPE_ATAPI) {
660 uint8_t type, removable, mode;
661 uint16_t blksize;
662
663 // Temporary values to do the transfer
664 bios_dsk->devices[device].device = DSK_DEVICE_CDROM;
665 bios_dsk->devices[device].mode = ATA_MODE_PIO16;
666 bios_dsk->drqp.buffer = buffer;
667 bios_dsk->drqp.dev_id = device;
668
669 if (ata_cmd_data_in(bios_dsk, ATA_CMD_IDENTIFY_PACKET, 1) != 0)
670 BX_PANIC("ata-detect: Failed to detect ATAPI device\n");
671
672 type = *(buffer+1) & 0x1f;
673 removable = (*(buffer+0) & 0x80) ? 1 : 0;
674#if VBOX_BIOS_CPU >= 80386
675 mode = *(buffer+96) ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
676#else
677 mode = ATA_MODE_PIO16;
678#endif
679 blksize = 2048;
680
681 bios_dsk->devices[device].device = type;
682 bios_dsk->devices[device].removable = removable;
683 bios_dsk->devices[device].mode = mode;
684 bios_dsk->devices[device].blksize = blksize;
685
686 // fill cdidmap
687 bios_dsk->cdidmap[cdcount] = device;
688 cdcount++;
689 }
690
691 {
692 uint32_t sizeinmb;
693 uint16_t ataversion;
694 uint8_t version, model[41];
695 int i;
696
697 switch (type) {
698 case DSK_TYPE_ATA:
699 sizeinmb = (bios_dsk->devices[device].sectors >> 11);
700 case DSK_TYPE_ATAPI:
701 // Read ATA/ATAPI version
702 ataversion = ((uint16_t)(*(buffer+161))<<8) | *(buffer+160);
703 for (version = 15; version > 0; version--) {
704 if ((ataversion & (1 << version)) !=0 )
705 break;
706 }
707
708 // Read model name
709 for (i = 0; i < 20; i++ ) {
710 *(model+(i*2)) = *(buffer+(i*2)+54+1);
711 *(model+(i*2)+1) = *(buffer+(i*2)+54);
712 }
713
714 // Reformat
715 *(model+40) = 0x00;
716 for ( i = 39; i > 0; i-- ){
717 if (*(model+i) == 0x20)
718 *(model+i) = 0x00;
719 else
720 break;
721 }
722 break;
723 }
724
725#ifdef VBOXz
726 // we don't want any noisy output for now
727#else /* !VBOX */
728 switch (type) {
729 int c;
730 case DSK_TYPE_ATA:
731 printf("ata%d %s: ", channel, slave ? " slave" : "master");
732 i=0;
733 while(c=*(model+i++))
734 printf("%c", c);
735 printf(" ATA-%d Hard-Disk (%lu MBytes)\n", version, sizeinmb);
736 break;
737 case DSK_TYPE_ATAPI:
738 printf("ata%d %s: ", channel, slave ? " slave" : "master");
739 i=0;
740 while(c=*(model+i++))
741 printf("%c", c);
742 if (bios_dsk->devices[device].device == DSK_DEVICE_CDROM)
743 printf(" ATAPI-%d CD-ROM/DVD-ROM\n", version);
744 else
745 printf(" ATAPI-%d Device\n", version);
746 break;
747 case DSK_TYPE_UNKNOWN:
748 printf("ata%d %s: Unknown device\n", channel , slave ? " slave" : "master");
749 break;
750 }
751#endif /* !VBOX */
752 }
753 }
754
755 // Store the devices counts
756 bios_dsk->hdcount = hdcount;
757 bios_dsk->cdcount = cdcount;
758 write_byte(0x40,0x75, hdcount);
759
760#ifdef VBOX
761 // we don't want any noisy output for now
762#else /* !VBOX */
763 printf("\n");
764#endif /* !VBOX */
765
766 // FIXME : should use bios=cmos|auto|disable bits
767 // FIXME : should know about translation bits
768 // FIXME : move hard_drive_post here
769
770}
771
772// ---------------------------------------------------------------------------
773// ATA/ATAPI driver : execute a data-out command
774// ---------------------------------------------------------------------------
775 // returns
776 // 0 : no error
777 // 1 : BUSY bit set
778 // 2 : read error
779 // 3 : expected DRQ=1
780 // 4 : no sectors left to read/verify
781 // 5 : more sectors to read/verify
782 // 6 : no sectors left to write
783 // 7 : more sectors to write
784uint16_t ata_cmd_data_out(bio_dsk_t __far *bios_dsk, uint16_t command, uint16_t count)
785{
786 uint64_t lba;
787 char __far *buffer;
788 uint16_t iobase1, iobase2, blksize;
789 uint16_t cylinder;
790 uint16_t head;
791 uint16_t sector;
792 uint16_t device;
793 uint8_t channel, slave;
794 uint8_t status, mode;
795
796 device = bios_dsk->drqp.dev_id;
797 channel = device / 2;
798 slave = device % 2;
799
800 iobase1 = bios_dsk->channels[channel].iobase1;
801 iobase2 = bios_dsk->channels[channel].iobase2;
802 mode = bios_dsk->devices[device].mode;
803 blksize = 0x200; // was = bios_dsk->devices[device].blksize;
804#if VBOX_BIOS_CPU >= 80386
805 if (mode == ATA_MODE_PIO32)
806 blksize >>= 2;
807 else
808#endif
809 blksize >>= 1;
810
811 status = inb(iobase1 + ATA_CB_STAT);
812 if (status & ATA_CB_STAT_BSY)
813 {
814 // Enable interrupts
815 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
816 return 1;
817 }
818
819 lba = bios_dsk->drqp.lba;
820 buffer = bios_dsk->drqp.buffer;
821 sector = bios_dsk->drqp.sector;
822 cylinder = bios_dsk->drqp.cylinder;
823 head = bios_dsk->drqp.head;
824
825 // sector will be 0 only on lba access. Convert to lba-chs
826 if (sector == 0) {
827 if (lba + count >= 268435456)
828 {
829 sector = (lba >> 24) & 0x00ff;
830 cylinder = (lba >> 32) & 0xffff;
831 outb(iobase1 + ATA_CB_SC, (count & 0xff00) >> 8);
832 outb(iobase1 + ATA_CB_SN, sector);
833 outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
834 outb(iobase1 + ATA_CB_CH, cylinder >> 8);
835 /* Leave the bottom 24 bits as is, they are treated correctly by the
836 * LBA28 code path. */
837 lba &= 0xffffff;
838 }
839 sector = (uint16_t) (lba & 0x000000ffL);
840 lba >>= 8;
841 cylinder = (uint16_t) (lba & 0x0000ffffL);
842 lba >>= 16;
843 head = ((uint16_t) (lba & 0x0000000fL)) | 0x40;
844 }
845
846 outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
847 outb(iobase1 + ATA_CB_FR, 0x00);
848 outb(iobase1 + ATA_CB_SC, count);
849 outb(iobase1 + ATA_CB_SN, sector);
850 outb(iobase1 + ATA_CB_CL, cylinder & 0x00ff);
851 outb(iobase1 + ATA_CB_CH, cylinder >> 8);
852 outb(iobase1 + ATA_CB_DH, (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0) | (uint8_t) head );
853 outb(iobase1 + ATA_CB_CMD, command);
854
855 while (1) {
856 status = inb(iobase1 + ATA_CB_STAT);
857 if ( !(status & ATA_CB_STAT_BSY) )
858 break;
859 }
860
861 if (status & ATA_CB_STAT_ERR) {
862 BX_DEBUG_ATA("%s: write error\n", __func__);
863 // Enable interrupts
864 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
865 return 2;
866 } else if ( !(status & ATA_CB_STAT_DRQ) ) {
867 BX_DEBUG_ATA("%s: DRQ not set (status %02x)\n", __func__, (unsigned) status);
868 // Enable interrupts
869 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
870 return 3;
871 }
872
873 // FIXME : move seg/off translation here
874
875 int_enable(); // enable higher priority interrupts
876
877 while (1) {
878
879 // adjust if there will be an overrun. 2K max sector size
880 if (FP_OFF(buffer) >= 0xF800)
881 buffer = MK_FP(FP_SEG(buffer) + 0x80, FP_OFF(buffer) - 0x800);
882
883#if VBOX_BIOS_CPU >= 80386
884 if (mode == ATA_MODE_PIO32)
885 buffer = rep_outsd(buffer, blksize, iobase1);
886 else
887#endif
888 buffer = rep_outsw(buffer, blksize, iobase1);
889
890 bios_dsk->drqp.trsfsectors++;
891 count--;
892 while (1) {
893 status = inb(iobase1 + ATA_CB_STAT);
894 if ( !(status & ATA_CB_STAT_BSY) )
895 break;
896 }
897 if (count == 0) {
898 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
899 != ATA_CB_STAT_RDY ) {
900 BX_DEBUG_ATA("%s: no sectors left (status %02x)\n", __func__, (unsigned) status);
901 // Enable interrupts
902 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
903 return 6;
904 }
905 break;
906 }
907 else {
908 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
909 != (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
910 BX_DEBUG_ATA("%s: more sectors left (status %02x)\n", __func__, (unsigned) status);
911 // Enable interrupts
912 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
913 return 7;
914 }
915 continue;
916 }
917 }
918 // Enable interrupts
919 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
920 return 0;
921}
922
923
924/**
925 * Read sectors from an attached ATA device.
926 *
927 * @returns status code.
928 * @param bios_dsk Pointer to disk request packet (in the
929 * EBDA).
930 */
931int ata_read_sectors(bio_dsk_t __far *bios_dsk)
932{
933 uint16_t n_sect;
934 int status;
935 uint8_t device_id;
936
937 device_id = bios_dsk->drqp.dev_id;
938 n_sect = bios_dsk->drqp.nsect;
939
940 if (bios_dsk->drqp.sector) {
941 /* CHS addressing. */
942 bios_dsk->devices[device_id].blksize = n_sect * 0x200;
943 BX_DEBUG_ATA("%s: reading %u sectors (CHS)\n", __func__, n_sect);
944 status = ata_cmd_data_in(bios_dsk, ATA_CMD_READ_MULTIPLE, n_sect);
945 bios_dsk->devices[device_id].blksize = 0x200;
946 } else {
947 /* LBA addressing. */
948 if (bios_dsk->drqp.lba + n_sect >= 268435456) {
949 BX_DEBUG_ATA("%s: reading %u sector (LBA,EXT)\n", __func__, n_sect);
950 status = ata_cmd_data_in(bios_dsk, ATA_CMD_READ_SECTORS_EXT, n_sect);
951 } else {
952 bios_dsk->devices[device_id].blksize = n_sect * 0x200;
953 BX_DEBUG_ATA("%s: reading %u sector (LBA,MULT)\n", __func__, n_sect);
954 status = ata_cmd_data_in(bios_dsk, ATA_CMD_READ_MULTIPLE, n_sect);
955 bios_dsk->devices[device_id].blksize = 0x200;
956 }
957 }
958 return status;
959}
960
961/**
962 * Write sectors to an attached ATA device.
963 *
964 * @returns status code.
965 * @param bios_dsk Pointer to disk request packet (in the
966 * EBDA).
967 */
968int ata_write_sectors(bio_dsk_t __far *bios_dsk)
969{
970 uint16_t n_sect;
971
972 n_sect = bios_dsk->drqp.nsect;
973
974 if (bios_dsk->drqp.sector) {
975 /* CHS addressing. */
976 return ata_cmd_data_out(bios_dsk, ATA_CMD_WRITE_SECTORS, n_sect);
977 } else {
978 /* LBA addressing. */
979 if (bios_dsk->drqp.lba + n_sect >= 268435456)
980 return ata_cmd_data_out(bios_dsk, ATA_CMD_WRITE_SECTORS_EXT, n_sect);
981 else
982 return ata_cmd_data_out(bios_dsk, ATA_CMD_WRITE_SECTORS, n_sect);
983 }
984}
985
986
987// ---------------------------------------------------------------------------
988// ATA/ATAPI driver : execute a packet command
989// ---------------------------------------------------------------------------
990 // returns
991 // 0 : no error
992 // 1 : error in parameters
993 // 2 : BUSY bit set
994 // 3 : error
995 // 4 : not ready
996uint16_t ata_cmd_packet(uint16_t device, uint8_t cmdlen, char __far *cmdbuf,
997 uint32_t length, uint8_t inout, char __far *buffer)
998{
999 uint16_t iobase1, iobase2;
1000 uint16_t lcount, count;
1001 uint8_t channel, slave;
1002 uint8_t status, mode, lmode;
1003 uint32_t transfer;
1004 bio_dsk_t __far *bios_dsk;
1005
1006 bios_dsk = read_word(0x0040, 0x000E) :> &EbdaData->bdisk;
1007
1008 channel = device / 2;
1009 slave = device % 2;
1010
1011 // Data out is not supported yet
1012 if (inout == ATA_DATA_OUT) {
1013 BX_INFO("%s: DATA_OUT not supported yet\n", __func__);
1014 return 1;
1015 }
1016
1017 iobase1 = bios_dsk->channels[channel].iobase1;
1018 iobase2 = bios_dsk->channels[channel].iobase2;
1019 mode = bios_dsk->devices[device].mode;
1020 transfer = 0L;
1021
1022 if (cmdlen < 12)
1023 cmdlen = 12;
1024 if (cmdlen > 12)
1025 cmdlen = 16;
1026 cmdlen >>= 1;
1027
1028 // Reset count of transferred data
1029 /// @todo clear in calling code?
1030 bios_dsk->drqp.trsfsectors = 0;
1031 bios_dsk->drqp.trsfbytes = 0;
1032
1033 status = inb(iobase1 + ATA_CB_STAT);
1034 if (status & ATA_CB_STAT_BSY)
1035 return 2;
1036
1037 outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
1038 // outb(iobase1 + ATA_CB_FR, 0x00);
1039 // outb(iobase1 + ATA_CB_SC, 0x00);
1040 // outb(iobase1 + ATA_CB_SN, 0x00);
1041 outb(iobase1 + ATA_CB_CL, 0xfff0 & 0x00ff);
1042 outb(iobase1 + ATA_CB_CH, 0xfff0 >> 8);
1043 outb(iobase1 + ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
1044 outb(iobase1 + ATA_CB_CMD, ATA_CMD_PACKET);
1045
1046 // Device should ok to receive command
1047 while (1) {
1048 status = inb(iobase1 + ATA_CB_STAT);
1049 if ( !(status & ATA_CB_STAT_BSY) ) break;
1050 }
1051
1052 if (status & ATA_CB_STAT_CHK) {
1053 BX_DEBUG_ATA("%s: error, status is %02x\n", __func__, status);
1054 // Enable interrupts
1055 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1056 return 3;
1057 } else if ( !(status & ATA_CB_STAT_DRQ) ) {
1058 BX_DEBUG_ATA("%s: DRQ not set (status %02x)\n", __func__, (unsigned) status);
1059 // Enable interrupts
1060 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1061 return 4;
1062 }
1063
1064 int_enable(); // enable higher priority interrupts
1065
1066 // Normalize address
1067 BX_DEBUG_ATA("acp1 buffer ptr: %04x:%04x wlen %04x\n", FP_SEG(cmdbuf), FP_OFF(cmdbuf), cmdlen);
1068 cmdbuf = MK_FP(FP_SEG(cmdbuf) + FP_OFF(cmdbuf) / 16 , FP_OFF(cmdbuf) % 16);
1069 // cmdseg += (cmdoff / 16);
1070 // cmdoff %= 16;
1071
1072 // Send command to device
1073 rep_outsw(cmdbuf, cmdlen, iobase1);
1074
1075 if (inout == ATA_DATA_NO) {
1076 status = inb(iobase1 + ATA_CB_STAT);
1077 }
1078 else {
1079 while (1) {
1080
1081 while (1) {
1082 status = inb(iobase1 + ATA_CB_STAT);
1083 if ( !(status & ATA_CB_STAT_BSY) )
1084 break;
1085 }
1086
1087 // Check if command completed
1088 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ) ) ==0 )
1089 break;
1090
1091 if (status & ATA_CB_STAT_CHK) {
1092 BX_DEBUG_ATA("%s: error (status %02x)\n", __func__, status);
1093 // Enable interrupts
1094 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1095 return 3;
1096 }
1097
1098 // Device must be ready to send data
1099 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ | ATA_CB_STAT_CHK) )
1100 != (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ) ) {
1101 BX_DEBUG_ATA("%s: not ready (status %02x)\n", __func__, status);
1102 // Enable interrupts
1103 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1104 return 4;
1105 }
1106
1107 // Normalize address
1108 BX_DEBUG_ATA("acp2 buffer ptr: %04x:%04x\n", FP_SEG(buffer), FP_OFF(buffer));
1109 buffer = MK_FP(FP_SEG(buffer) + FP_OFF(buffer) / 16 , FP_OFF(buffer) % 16);
1110 // bufseg += (bufoff / 16);
1111 // bufoff %= 16;
1112
1113 // Get the byte count
1114 lcount = ((uint16_t)(inb(iobase1 + ATA_CB_CH))<<8)+inb(iobase1 + ATA_CB_CL);
1115
1116 // Save byte count
1117 count = lcount;
1118
1119 BX_DEBUG_ATA("Trying to read %04x bytes ",lcount);
1120 BX_DEBUG_ATA("to 0x%04x:0x%04x\n",FP_SEG(buffer),FP_OFF(buffer));
1121
1122 // If counts not dividable by 4, use 16bits mode
1123 lmode = mode;
1124 if (lcount & 0x03)
1125 lmode = ATA_MODE_PIO16;
1126
1127 // adds an extra byte if count are odd. before is always even
1128 if (lcount & 0x01) {
1129 lcount += 1;
1130 }
1131
1132#if VBOX_BIOS_CPU >= 80386
1133 if (lmode == ATA_MODE_PIO32) {
1134 lcount >>= 2;
1135 } else
1136#endif
1137 {
1138 lcount >>= 1;
1139 }
1140
1141#if VBOX_BIOS_CPU >= 80386
1142 if (lmode == ATA_MODE_PIO32) {
1143 rep_insd(buffer, lcount, iobase1);
1144 } else
1145#endif
1146 {
1147 rep_insw(buffer, lcount, iobase1);
1148 }
1149
1150
1151 // Compute new buffer address
1152 buffer += count;
1153
1154 // Save transferred bytes count
1155 transfer += count;
1156 bios_dsk->drqp.trsfbytes = transfer;
1157 }
1158 }
1159
1160 // Final check, device must be ready
1161 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ | ATA_CB_STAT_CHK) )
1162 != ATA_CB_STAT_RDY ) {
1163 BX_DEBUG_ATA("%s: not ready (status %02x)\n", __func__, (unsigned) status);
1164 // Enable interrupts
1165 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1166 return 4;
1167 }
1168
1169 // Enable interrupts
1170 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1171 return 0;
1172}
1173
1174// ---------------------------------------------------------------------------
1175// ATA/ATAPI driver : reset device; intended for ATAPI devices
1176// ---------------------------------------------------------------------------
1177 // returns
1178 // 0 : no error
1179 // 1 : error
1180uint16_t ata_soft_reset(uint16_t device)
1181{
1182 uint16_t iobase1, iobase2;
1183 uint8_t channel, slave;
1184 uint8_t status;
1185 bio_dsk_t __far *bios_dsk;
1186
1187 bios_dsk = read_word(0x0040, 0x000E) :> &EbdaData->bdisk;
1188
1189 channel = device / 2;
1190 slave = device % 2;
1191
1192 iobase1 = bios_dsk->channels[channel].iobase1;
1193 iobase2 = bios_dsk->channels[channel].iobase2;
1194
1195 /* Send a reset command to the device. */
1196 outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15 | ATA_CB_DC_NIEN);
1197 outb(iobase1 + ATA_CB_DH, slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0);
1198 outb(iobase1 + ATA_CB_CMD, ATA_CMD_DEVICE_RESET);
1199
1200 /* Wait for the device to clear BSY. */
1201 while (1) {
1202 status = inb(iobase1 + ATA_CB_STAT);
1203 if ( !(status & ATA_CB_STAT_BSY) ) break;
1204 }
1205
1206 /* Final check, device must be ready */
1207 if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ | ATA_CB_STAT_CHK) )
1208 != ATA_CB_STAT_RDY ) {
1209 BX_DEBUG_ATA("%s: not ready (status %02x)\n", __func__, (unsigned) status);
1210 /* Enable interrupts */
1211 outb(iobase2 + ATA_CB_DC, ATA_CB_DC_HD15);
1212 return 1;
1213 }
1214
1215 /* Enable interrupts */
1216 outb(iobase2+ATA_CB_DC, ATA_CB_DC_HD15);
1217 return 0;
1218}
1219
1220
1221// ---------------------------------------------------------------------------
1222// End of ATA/ATAPI Driver
1223// ---------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette