vbe.c@ 18265

Last change on this file since 18265 was 18265, checked in by vboxsync, 16 years ago
config file cleanup + small copyright year update
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 46.7 KB

Line
1	// ============================================================================================
2	//
3	// Copyright (C) 2002 Jeroen Janssen
4	//
5	// This library is free software; you can redistribute it and/or
6	// modify it under the terms of the GNU Lesser General Public
7	// License as published by the Free Software Foundation; either
8	// version 2 of the License, or (at your option) any later version.
9	//
10	// This library is distributed in the hope that it will be useful,
11	// but WITHOUT ANY WARRANTY; without even the implied warranty of
12	// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13	// Lesser General Public License for more details.
14	//
15	// You should have received a copy of the GNU Lesser General Public
16	// License along with this library; if not, write to the Free Software
17	// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18	//
19	// ============================================================================================
20	//
21	// This VBE is part of the VGA Bios specific to the plex86/bochs Emulated VGA card.
22	// You can NOT drive any physical vga card with it.
23	//
24	// ============================================================================================
25	//
26	// This VBE Bios is based on information taken from :
27	// - VESA BIOS EXTENSION (VBE) Core Functions Standard Version 3.0 located at www.vesa.org
28	//
29	// ============================================================================================
30
31
32	/*
33	* Sun LGPL Disclaimer: For the avoidance of doubt, except that if any license choice
34	* other than GPL or LGPL is available it will apply instead, Sun elects to use only
35	* the Lesser General Public License version 2.1 (LGPLv2) at this time for any software where
36	* a choice of LGPL license versions is made available with the language indicating
37	* that LGPLv2 or any later version may be used, or where a choice of which version
38	* of the LGPL is applied is otherwise unspecified.
39	*/
40
41	// defines available
42
43	// disable VESA/VBE2 check in vbe info
44	//#define VBE2_NO_VESA_CHECK
45
46	// use bytewise i/o by default (Longhorn issue)
47	#define VBE_BYTEWISE_IO
48
49	// Use VBE new dynamic mode list. Note that without this option, no
50	// checks are currently done to make sure that modes fit into the
51	// framebuffer!
52	#define VBE_NEW_DYN_LIST
53
54
55	#include "vbe.h"
56
57
58	// The current OEM Software Revision of this VBE Bios
59	#define VBE_OEM_SOFTWARE_REV 0x0002
60
61	extern char vbebios_copyright;
62	extern char vbebios_vendor_name;
63	extern char vbebios_product_name;
64	extern char vbebios_product_revision;
65
66	ASM_START
67	// FIXME: 'merge' these (c) etc strings with the vgabios.c strings?
68	_vbebios_copyright:
69	.ascii "VirtualBox VBE BIOS http://www.virtualbox.org/"
70	.byte 0x00
71
72	_vbebios_vendor_name:
73	.ascii "Sun Microsystems, Inc."
74	.byte 0x00
75
76	_vbebios_product_name:
77	.ascii "VirtualBox VBE Adapter"
78	.byte 0x00
79
80	_vbebios_product_revision:
81	.ascii "Sun VirtualBox Version "
82	.ascii VBOX_VERSION_STRING
83	.byte 0x00
84
85	_vbebios_info_string:
86	//.ascii "Bochs VBE Display Adapter enabled"
87	.ascii "VirtualBox VBE Display Adapter enabled"
88	.byte 0x0a,0x0d
89	.byte 0x0a,0x0d
90	.byte 0x00
91
92	_no_vbebios_info_string:
93	.ascii "No VirtualBox VBE support available!"
94	.byte 0x0a,0x0d
95	.byte 0x0a,0x0d
96	.byte 0x00
97
98	msg_vbe_init:
99	.ascii "VirtualBox Version "
100	.ascii VBOX_VERSION_STRING
101	.ascii " VBE Display Adapter"
102	.byte 0x0a,0x0d, 0x00
103
104
105	.align 2
106	vesa_pm_start:
107	dw vesa_pm_set_window - vesa_pm_start
108	dw vesa_pm_set_display_start - vesa_pm_start
109	dw vesa_pm_unimplemented - vesa_pm_start
110	dw vesa_pm_io_ports_table - vesa_pm_start
111	vesa_pm_io_ports_table:
112	dw VBE_DISPI_IOPORT_INDEX
113	dw VBE_DISPI_IOPORT_INDEX + 1
114	dw VBE_DISPI_IOPORT_DATA
115	dw VBE_DISPI_IOPORT_DATA + 1
116	dw 0xffff
117	dw 0xffff
118
119	USE32
120	vesa_pm_set_window:
121	cmp bx, #0x00
122	je vesa_pm_set_display_window1
123	mov ax, #0x0100
124	ret
125	vesa_pm_set_display_window1:
126	mov ax, dx
127	push dx
128	push ax
129	mov dx, # VBE_DISPI_IOPORT_INDEX
130	mov ax, # VBE_DISPI_INDEX_BANK
131	out dx, ax
132	pop ax
133	mov dx, # VBE_DISPI_IOPORT_DATA
134	out dx, ax
135	in ax, dx
136	pop dx
137	cmp dx, ax
138	jne illegal_window
139	mov ax, #0x004f
140	ret
141	illegal_window:
142	mov ax, #0x014f
143	ret
144	vesa_pm_set_display_start:
145	cmp bl, #0x80
146	je vesa_pm_set_display_start1
147	cmp bl, #0x00
148	je vesa_pm_set_display_start1
149	mov ax, #0x0100
150	ret
151	vesa_pm_set_display_start1:
152	; convert offset to (X, Y) coordinate
153	; (would be simpler to change Bochs VBE API...)
154	push eax
155	push ecx
156	push edx
157	push esi
158	push edi
159	shl edx, #16
160	and ecx, #0xffff
161	or ecx, edx
162	shl ecx, #2
163	mov eax, ecx
164	push eax
165	mov dx, # VBE_DISPI_IOPORT_INDEX
166	mov ax, # VBE_DISPI_INDEX_VIRT_WIDTH
167	out dx, ax
168	mov dx, # VBE_DISPI_IOPORT_DATA
169	in ax, dx
170	movzx ecx, ax
171	mov dx, # VBE_DISPI_IOPORT_INDEX
172	mov ax, # VBE_DISPI_INDEX_BPP
173	out dx, ax
174	mov dx, # VBE_DISPI_IOPORT_DATA
175	in ax, dx
176	movzx esi, ax
177	pop eax
178
179	cmp esi, #4
180	jz bpp4_mode
181	add esi, #7
182	shr esi, #3
183	imul ecx, esi
184	xor edx, edx
185	div ecx
186	mov edi, eax
187	mov eax, edx
188	xor edx, edx
189	div esi
190	jmp set_xy_regs
191
192	bpp4_mode:
193	shr ecx, #1
194	xor edx, edx
195	div ecx
196	mov edi, eax
197	mov eax, edx
198	shl eax, #1
199
200	set_xy_regs:
201	push dx
202	push ax
203	mov dx, # VBE_DISPI_IOPORT_INDEX
204	mov ax, # VBE_DISPI_INDEX_X_OFFSET
205	out dx, ax
206	pop ax
207	mov dx, # VBE_DISPI_IOPORT_DATA
208	out dx, ax
209	pop dx
210
211	mov ax, di
212	push dx
213	push ax
214	mov dx, # VBE_DISPI_IOPORT_INDEX
215	mov ax, # VBE_DISPI_INDEX_Y_OFFSET
216	out dx, ax
217	pop ax
218	mov dx, # VBE_DISPI_IOPORT_DATA
219	out dx, ax
220	pop dx
221
222	pop edi
223	pop esi
224	pop edx
225	pop ecx
226	pop eax
227	mov ax, #0x004f
228	ret
229
230	vesa_pm_unimplemented:
231	mov ax, #0x014f
232	ret
233	USE16
234	vesa_pm_end:
235
236	;; Bytewise in/out
237	#ifdef VBE_BYTEWISE_IO
238	out_dx_ax:
239	xchg ah, al
240	out dx, al
241	xchg ah, al
242	out dx, al
243	ret
244
245	in_ax_dx:
246	in al, dx
247	xchg ah, al
248	in al, dx
249	ret
250	#endif
251
252	; DISPI ioport functions
253
254	dispi_get_id:
255	push dx
256	mov dx, # VBE_DISPI_IOPORT_INDEX
257	mov ax, # VBE_DISPI_INDEX_ID
258	#ifdef VBE_BYTEWISE_IO
259	call out_dx_ax
260	#else
261	out dx, ax
262	#endif
263	mov dx, # VBE_DISPI_IOPORT_DATA
264	#ifdef VBE_BYTEWISE_IO
265	call in_ax_dx
266	#else
267	in ax, dx
268	#endif
269	pop dx
270	ret
271
272	dispi_set_id:
273	push dx
274	push ax
275	mov dx, # VBE_DISPI_IOPORT_INDEX
276	mov ax, # VBE_DISPI_INDEX_ID
277	#ifdef VBE_BYTEWISE_IO
278	call out_dx_ax
279	#else
280	out dx, ax
281	#endif
282	pop ax
283	mov dx, # VBE_DISPI_IOPORT_DATA
284	#ifdef VBE_BYTEWISE_IO
285	call out_dx_ax
286	#else
287	out dx, ax
288	#endif
289	pop dx
290	ret
291	ASM_END
292
293	static void dispi_set_xres(xres)
294	Bit16u xres;
295	{
296	ASM_START
297	push bp
298	mov bp, sp
299	push ax
300	push dx
301
302	mov dx, # VBE_DISPI_IOPORT_INDEX
303	mov ax, # VBE_DISPI_INDEX_XRES
304	#ifdef VBE_BYTEWISE_IO
305	call out_dx_ax
306	#else
307	out dx, ax
308	#endif
309	mov dx, # VBE_DISPI_IOPORT_DATA
310	mov ax, 4[bp] ; xres
311	#ifdef VBE_BYTEWISE_IO
312	call out_dx_ax
313	#else
314	out dx, ax
315	#endif
316	pop dx
317	pop ax
318	pop bp
319	ASM_END
320	}
321
322	static void dispi_set_yres(yres)
323	Bit16u yres;
324	{
325	#ifdef VBOX
326	ASM_START
327	push bp
328	mov bp, sp
329	push ax
330	push dx
331
332	mov dx, # VBE_DISPI_IOPORT_INDEX
333	mov ax, # VBE_DISPI_INDEX_YRES
334	#ifdef VBE_BYTEWISE_IO
335	call out_dx_ax
336	#else
337	out dx, ax
338	#endif
339	mov dx, # VBE_DISPI_IOPORT_DATA
340	mov ax, 4[bp] ; yres
341	#ifdef VBE_BYTEWISE_IO
342	call out_dx_ax
343	#else
344	out dx, ax
345	#endif
346	pop dx
347	pop ax
348	pop bp
349	ASM_END
350	#else
351	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_YRES);
352	outw(VBE_DISPI_IOPORT_DATA,yres);
353	#endif
354	}
355
356	static void dispi_set_bpp(bpp)
357	Bit16u bpp;
358	{
359	#ifdef VBOX
360	ASM_START
361	push bp
362	mov bp, sp
363	push ax
364	push dx
365
366	mov dx, # VBE_DISPI_IOPORT_INDEX
367	mov ax, # VBE_DISPI_INDEX_BPP
368	#ifdef VBE_BYTEWISE_IO
369	call out_dx_ax
370	#else
371	out dx, ax
372	#endif
373	mov dx, # VBE_DISPI_IOPORT_DATA
374	mov ax, 4[bp] ; bpp
375	#ifdef VBE_BYTEWISE_IO
376	call out_dx_ax
377	#else
378	out dx, ax
379	#endif
380	pop dx
381	pop ax
382	pop bp
383	ASM_END
384	#else
385	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_BPP);
386	outw(VBE_DISPI_IOPORT_DATA,bpp);
387	#endif
388	}
389
390	ASM_START
391	; AL = bits per pixel / AH = bytes per pixel
392	dispi_get_bpp:
393	push dx
394	mov dx, # VBE_DISPI_IOPORT_INDEX
395	mov ax, # VBE_DISPI_INDEX_BPP
396	#ifdef VBE_BYTEWISE_IO
397	call out_dx_ax
398	#else
399	out dx, ax
400	#endif
401	mov dx, # VBE_DISPI_IOPORT_DATA
402	#ifdef VBE_BYTEWISE_IO
403	call in_ax_dx
404	#else
405	in ax, dx
406	#endif
407	mov ah, al
408	shr ah, 3
409	test al, #0x07
410	jz get_bpp_noinc
411	inc ah
412	get_bpp_noinc:
413	pop dx
414	ret
415
416	; get display capabilities
417
418	_dispi_get_max_xres:
419	push dx
420	push bx
421	call dispi_get_enable
422	mov bx, ax
423	or ax, # VBE_DISPI_GETCAPS
424	call _dispi_set_enable
425	mov dx, # VBE_DISPI_IOPORT_INDEX
426	mov ax, # VBE_DISPI_INDEX_XRES
427	#ifdef VBE_BYTEWISE_IO
428	call out_dx_ax
429	#else
430	out dx, ax
431	#endif
432	mov dx, # VBE_DISPI_IOPORT_DATA
433	#ifdef VBE_BYTEWISE_IO
434	call in_ax_dx
435	#else
436	in ax, dx
437	#endif
438	push ax
439	mov ax, bx
440	call _dispi_set_enable
441	pop ax
442	pop bx
443	pop dx
444	ret
445
446	_dispi_get_max_bpp:
447	push dx
448	push bx
449	call dispi_get_enable
450	mov bx, ax
451	or ax, # VBE_DISPI_GETCAPS
452	call _dispi_set_enable
453	mov dx, # VBE_DISPI_IOPORT_INDEX
454	mov ax, # VBE_DISPI_INDEX_BPP
455	#ifdef VBE_BYTEWISE_IO
456	call out_dx_ax
457	#else
458	out dx, ax
459	#endif
460	mov dx, # VBE_DISPI_IOPORT_DATA
461	#ifdef VBE_BYTEWISE_IO
462	call in_ax_dx
463	#else
464	in ax, dx
465	#endif
466	push ax
467	mov ax, bx
468	call _dispi_set_enable
469	pop ax
470	pop bx
471	pop dx
472	ret
473
474	_dispi_set_enable:
475	push dx
476	push ax
477	mov dx, # VBE_DISPI_IOPORT_INDEX
478	mov ax, # VBE_DISPI_INDEX_ENABLE
479	#ifdef VBE_BYTEWISE_IO
480	call out_dx_ax
481	#else
482	out dx, ax
483	#endif
484	pop ax
485	mov dx, # VBE_DISPI_IOPORT_DATA
486	#ifdef VBE_BYTEWISE_IO
487	call out_dx_ax
488	#else
489	out dx, ax
490	#endif
491	pop dx
492	ret
493
494	dispi_get_enable:
495	push dx
496	mov dx, # VBE_DISPI_IOPORT_INDEX
497	mov ax, # VBE_DISPI_INDEX_ENABLE
498	#ifdef VBE_BYTEWISE_IO
499	call out_dx_ax
500	#else
501	out dx, ax
502	#endif
503	mov dx, # VBE_DISPI_IOPORT_DATA
504	#ifdef VBE_BYTEWISE_IO
505	call in_ax_dx
506	#else
507	in ax, dx
508	#endif
509	pop dx
510	ret
511
512	_dispi_set_bank:
513	push dx
514	push ax
515	mov dx, # VBE_DISPI_IOPORT_INDEX
516	mov ax, # VBE_DISPI_INDEX_BANK
517	#ifdef VBE_BYTEWISE_IO
518	call out_dx_ax
519	#else
520	out dx, ax
521	#endif
522	pop ax
523	mov dx, # VBE_DISPI_IOPORT_DATA
524	#ifdef VBE_BYTEWISE_IO
525	call out_dx_ax
526	#else
527	out dx, ax
528	#endif
529	pop dx
530	ret
531
532	dispi_get_bank:
533	push dx
534	mov dx, # VBE_DISPI_IOPORT_INDEX
535	mov ax, # VBE_DISPI_INDEX_BANK
536	#ifdef VBE_BYTEWISE_IO
537	call out_dx_ax
538	#else
539	out dx, ax
540	#endif
541	mov dx, # VBE_DISPI_IOPORT_DATA
542	#ifdef VBE_BYTEWISE_IO
543	call in_ax_dx
544	#else
545	in ax, dx
546	#endif
547	pop dx
548	ret
549	ASM_END
550
551	static void dispi_set_bank_farcall()
552	{
553	ASM_START
554	cmp bx,#0x0100
555	je dispi_set_bank_farcall_get
556	or bx,bx
557	jnz dispi_set_bank_farcall_error
558	mov ax, dx
559	push dx
560	push ax
561	mov ax,# VBE_DISPI_INDEX_BANK
562	mov dx,# VBE_DISPI_IOPORT_INDEX
563	#ifdef VBE_BYTEWISE_IO
564	call out_dx_ax
565	#else
566	out dx,ax
567	#endif
568	pop ax
569	mov dx,# VBE_DISPI_IOPORT_DATA
570	#ifdef VBE_BYTEWISE_IO
571	call out_dx_ax
572	#else
573	out dx,ax
574	#endif
575	#ifdef VBE_BYTEWISE_IO
576	call in_ax_dx
577	#else
578	in ax,dx
579	#endif
580	pop dx
581	cmp dx,ax
582	jne dispi_set_bank_farcall_error
583	mov ax, #0x004f
584	retf
585	dispi_set_bank_farcall_get:
586	mov ax,# VBE_DISPI_INDEX_BANK
587	mov dx,# VBE_DISPI_IOPORT_INDEX
588	#ifdef VBE_BYTEWISE_IO
589	call out_dx_ax
590	#else
591	out dx,ax
592	#endif
593	mov dx,# VBE_DISPI_IOPORT_DATA
594	#ifdef VBE_BYTEWISE_IO
595	call in_ax_dx
596	#else
597	in ax,dx
598	#endif
599	mov dx,ax
600	retf
601	dispi_set_bank_farcall_error:
602	mov ax,#0x014F
603	retf
604	ASM_END
605	}
606
607	ASM_START
608	dispi_set_x_offset:
609	push dx
610	push ax
611	mov dx, # VBE_DISPI_IOPORT_INDEX
612	mov ax, # VBE_DISPI_INDEX_X_OFFSET
613	#ifdef VBE_BYTEWISE_IO
614	call out_dx_ax
615	#else
616	out dx, ax
617	#endif
618	pop ax
619	mov dx, # VBE_DISPI_IOPORT_DATA
620	#ifdef VBE_BYTEWISE_IO
621	call out_dx_ax
622	#else
623	out dx, ax
624	#endif
625	pop dx
626	ret
627
628	dispi_get_x_offset:
629	push dx
630	mov dx, # VBE_DISPI_IOPORT_INDEX
631	mov ax, # VBE_DISPI_INDEX_X_OFFSET
632	#ifdef VBE_BYTEWISE_IO
633	call out_dx_ax
634	#else
635	out dx, ax
636	#endif
637	mov dx, # VBE_DISPI_IOPORT_DATA
638	#ifdef VBE_BYTEWISE_IO
639	call in_ax_dx
640	#else
641	in ax, dx
642	#endif
643	pop dx
644	ret
645
646	dispi_set_y_offset:
647	push dx
648	push ax
649	mov dx, # VBE_DISPI_IOPORT_INDEX
650	mov ax, # VBE_DISPI_INDEX_Y_OFFSET
651	#ifdef VBE_BYTEWISE_IO
652	call out_dx_ax
653	#else
654	out dx, ax
655	#endif
656	pop ax
657	mov dx, # VBE_DISPI_IOPORT_DATA
658	#ifdef VBE_BYTEWISE_IO
659	call out_dx_ax
660	#else
661	out dx, ax
662	#endif
663	pop dx
664	ret
665
666	dispi_get_y_offset:
667	push dx
668	mov dx, # VBE_DISPI_IOPORT_INDEX
669	mov ax, # VBE_DISPI_INDEX_Y_OFFSET
670	#ifdef VBE_BYTEWISE_IO
671	call out_dx_ax
672	#else
673	out dx, ax
674	#endif
675	mov dx, # VBE_DISPI_IOPORT_DATA
676	#ifdef VBE_BYTEWISE_IO
677	call in_ax_dx
678	#else
679	in ax, dx
680	#endif
681	pop dx
682	ret
683
684	vga_set_virt_width:
685	push ax
686	push bx
687	push dx
688	mov bx, ax
689	call dispi_get_bpp
690	cmp al, #0x04
691	ja set_width_svga
692	shr bx, #1
693	set_width_svga:
694	shr bx, #3
695	mov dx, # VGAREG_VGA_CRTC_ADDRESS
696	mov ah, bl
697	mov al, #0x13
698	#ifdef VBE_BYTEWISE_IO
699	call out_dx_ax
700	#else
701	out dx, ax
702	#endif
703	pop dx
704	pop bx
705	pop ax
706	ret
707
708	dispi_set_virt_width:
709	call vga_set_virt_width
710	push dx
711	push ax
712	mov dx, # VBE_DISPI_IOPORT_INDEX
713	mov ax, # VBE_DISPI_INDEX_VIRT_WIDTH
714	#ifdef VBE_BYTEWISE_IO
715	call out_dx_ax
716	#else
717	out dx, ax
718	#endif
719	pop ax
720	mov dx, # VBE_DISPI_IOPORT_DATA
721	#ifdef VBE_BYTEWISE_IO
722	call out_dx_ax
723	#else
724	out dx, ax
725	#endif
726	pop dx
727	ret
728
729	dispi_get_virt_width:
730	push dx
731	mov dx, # VBE_DISPI_IOPORT_INDEX
732	mov ax, # VBE_DISPI_INDEX_VIRT_WIDTH
733	#ifdef VBE_BYTEWISE_IO
734	call out_dx_ax
735	#else
736	out dx, ax
737	#endif
738	mov dx, # VBE_DISPI_IOPORT_DATA
739	#ifdef VBE_BYTEWISE_IO
740	call in_ax_dx
741	#else
742	in ax, dx
743	#endif
744	pop dx
745	ret
746
747	dispi_get_virt_height:
748	push dx
749	mov dx, # VBE_DISPI_IOPORT_INDEX
750	mov ax, # VBE_DISPI_INDEX_VIRT_HEIGHT
751	#ifdef VBE_BYTEWISE_IO
752	call out_dx_ax
753	#else
754	out dx, ax
755	#endif
756	mov dx, # VBE_DISPI_IOPORT_DATA
757	#ifdef VBE_BYTEWISE_IO
758	call in_ax_dx
759	#else
760	in ax, dx
761	#endif
762	pop dx
763	ret
764
765	_vga_compat_setup:
766	push ax
767	push dx
768
769	; set CRT X resolution
770	mov dx, # VBE_DISPI_IOPORT_INDEX
771	mov ax, # VBE_DISPI_INDEX_XRES
772	#ifdef VBE_BYTEWISE_IO
773	call out_dx_ax
774	#else
775	out dx, ax
776	#endif
777	mov dx, # VBE_DISPI_IOPORT_DATA
778	#ifdef VBE_BYTEWISE_IO
779	call in_ax_dx
780	#else
781	in ax, dx
782	#endif
783	push ax
784	mov dx, # VGAREG_VGA_CRTC_ADDRESS
785	mov ax, #0x0011
786	#ifdef VBE_BYTEWISE_IO
787	call out_dx_ax
788	#else
789	out dx, ax
790	#endif
791	pop ax
792	push ax
793	shr ax, #3
794	dec ax
795	mov ah, al
796	mov al, #0x01
797	#ifdef VBE_BYTEWISE_IO
798	call out_dx_ax
799	#else
800	out dx, ax
801	#endif
802	pop ax
803	call vga_set_virt_width
804
805	; set CRT Y resolution
806	mov dx, # VBE_DISPI_IOPORT_INDEX
807	mov ax, # VBE_DISPI_INDEX_YRES
808	#ifdef VBE_BYTEWISE_IO
809	call out_dx_ax
810	#else
811	out dx, ax
812	#endif
813	mov dx, # VBE_DISPI_IOPORT_DATA
814	#ifdef VBE_BYTEWISE_IO
815	call in_ax_dx
816	#else
817	in ax, dx
818	#endif
819	dec ax
820	push ax
821	mov dx, # VGAREG_VGA_CRTC_ADDRESS
822	mov ah, al
823	mov al, #0x12
824	#ifdef VBE_BYTEWISE_IO
825	call out_dx_ax
826	#else
827	out dx, ax
828	#endif
829	pop ax
830	mov al, #0x07
831	out dx, al
832	inc dx
833	in al, dx
834	and al, #0xbd
835	test ah, #0x01
836	jz bit8_clear
837	or al, #0x02
838	bit8_clear:
839	test ah, #0x02
840	jz bit9_clear
841	or al, #0x40
842	bit9_clear:
843	out dx, al
844
845	; other settings
846	mov dx, # VGAREG_VGA_CRTC_ADDRESS
847	mov ax, #0x0009
848	#ifdef VBE_BYTEWISE_IO
849	call out_dx_ax
850	#else
851	out dx, ax
852	#endif
853	mov al, #0x17
854	out dx, al
855	mov dx, # VGAREG_VGA_CRTC_DATA
856	in al, dx
857	or al, #0x03
858	out dx, al
859	mov dx, # VGAREG_ACTL_RESET
860	in al, dx
861	mov dx, # VGAREG_ACTL_ADDRESS
862	mov al, #0x10
863	out dx, al
864	mov dx, # VGAREG_ACTL_READ_DATA
865	in al, dx
866	or al, #0x01
867	mov dx, # VGAREG_ACTL_ADDRESS
868	out dx, al
869	mov al, #0x20
870	out dx, al
871	mov dx, # VGAREG_GRDC_ADDRESS
872	mov ax, #0x0506
873	#ifdef VBE_BYTEWISE_IO
874	call out_dx_ax
875	#else
876	out dx, ax
877	#endif
878	mov dx, # VGAREG_SEQU_ADDRESS
879	mov ax, #0x0f02
880	#ifdef VBE_BYTEWISE_IO
881	call out_dx_ax
882	#else
883	out dx, ax
884	#endif
885
886	; settings for >= 8bpp
887	mov dx, # VBE_DISPI_IOPORT_INDEX
888	mov ax, # VBE_DISPI_INDEX_BPP
889	#ifdef VBE_BYTEWISE_IO
890	call out_dx_ax
891	#else
892	out dx, ax
893	#endif
894	mov dx, # VBE_DISPI_IOPORT_DATA
895	#ifdef VBE_BYTEWISE_IO
896	call in_ax_dx
897	#else
898	in ax, dx
899	#endif
900	cmp al, #0x08
901	jb vga_compat_end
902	mov dx, # VGAREG_VGA_CRTC_ADDRESS
903	mov al, #0x14
904	out dx, al
905	mov dx, # VGAREG_VGA_CRTC_DATA
906	in al, dx
907	or al, #0x40
908	out dx, al
909	mov dx, # VGAREG_ACTL_RESET
910	in al, dx
911	mov dx, # VGAREG_ACTL_ADDRESS
912	mov al, #0x10
913	out dx, al
914	mov dx, # VGAREG_ACTL_READ_DATA
915	in al, dx
916	or al, #0x40
917	mov dx, # VGAREG_ACTL_ADDRESS
918	out dx, al
919	mov al, #0x20
920	out dx, al
921	mov dx, # VGAREG_SEQU_ADDRESS
922	mov al, #0x04
923	out dx, al
924	mov dx, # VGAREG_SEQU_DATA
925	in al, dx
926	or al, #0x08
927	out dx, al
928	mov dx, # VGAREG_GRDC_ADDRESS
929	mov al, #0x05
930	out dx, al
931	mov dx, # VGAREG_GRDC_DATA
932	in al, dx
933	and al, #0x9f
934	or al, #0x40
935	out dx, al
936
937	vga_compat_end:
938	pop dx
939	pop ax
940	ASM_END
941
942
943	#ifdef VBE_NEW_DYN_LIST
944	Bit16u in_word(port, addr)
945	Bit16u port; Bit16u addr;
946	{
947	outw(port, addr);
948	return inw(port);
949	}
950
951	Bit8u in_byte(port, addr)
952	Bit16u port; Bit16u addr;
953	{
954	outw(port, addr);
955	return inb(port);
956	}
957	#endif
958
959
960	// ModeInfo helper function
961	static ModeInfoListItem* mode_info_find_mode(mode, using_lfb)
962	Bit16u mode; Boolean using_lfb;
963	{
964	#ifdef VBE_NEW_DYN_LIST
965	Bit16u sig, vmode, attrs;
966	ModeInfoListItem cur_info; / used to get the mode list offset. */
967
968	/* Read VBE Extra Data signature */
969	sig = in_word(VBE_EXTRA_PORT, 0);
970	if (sig != VBEHEADER_MAGIC)
971	{
972	printf("Signature NOT found! %x\n", sig);
973	return 0;
974	}
975
976	cur_info = sizeof(VBEHeader);
977
978	vmode = in_word(VBE_EXTRA_PORT, &cur_info->mode);
979	while (vmode != VBE_VESA_MODE_END_OF_LIST)
980	{
981	attrs = in_word(VBE_EXTRA_PORT, &cur_info->info.ModeAttributes);
982
983	if (vmode == mode)
984	{
985	if (!using_lfb)
986	{
987	return cur_info;
988	}
989	else if (attrs & VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE)
990	{
991	return cur_info;
992	}
993	else
994	{
995	cur_info++;
996	vmode = in_word(VBE_EXTRA_PORT, &cur_info->mode);
997	}
998	}
999	else
1000	{
1001	cur_info++;
1002	vmode = in_word(VBE_EXTRA_PORT, &cur_info->mode);
1003	}
1004	}
1005	#else
1006	ModeInfoListItem *cur_info=&mode_info_list;
1007
1008	while (cur_info->mode != VBE_VESA_MODE_END_OF_LIST)
1009	{
1010	if (cur_info->mode == mode)
1011	{
1012	if (!using_lfb)
1013	{
1014	return cur_info;
1015	}
1016	else if (cur_info->info.ModeAttributes & VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE)
1017	{
1018	return cur_info;
1019	}
1020	else
1021	{
1022	cur_info++;
1023	}
1024	}
1025	else
1026	{
1027	cur_info++;
1028	}
1029	}
1030	#endif
1031	return 0;
1032	}
1033
1034	ASM_START
1035
1036	; Has VBE display - Returns true if VBE display detected
1037
1038	_vbe_has_vbe_display:
1039	push ds
1040	push bx
1041	mov ax, # BIOSMEM_SEG
1042	mov ds, ax
1043	mov bx, # BIOSMEM_VBE_FLAG
1044	mov al, [bx]
1045	and al, #0x01
1046	xor ah, ah
1047	pop bx
1048	pop ds
1049	ret
1050
1051	; VBE Init - Initialise the Vesa Bios Extension Code
1052	; This function does a sanity check on the host side display code interface.
1053
1054	vbe_init:
1055	mov ax, # VBE_DISPI_ID0
1056	call dispi_set_id
1057	call dispi_get_id
1058	cmp ax, # VBE_DISPI_ID0
1059	jne no_vbe_interface
1060	push ds
1061	push bx
1062	mov ax, # BIOSMEM_SEG
1063	mov ds, ax
1064	mov bx, # BIOSMEM_VBE_FLAG
1065	mov al, #0x01
1066	mov [bx], al
1067	pop bx
1068	pop ds
1069	; mov ax, # VBE_DISPI_ID3
1070	mov ax, # VBE_DISPI_ID4
1071	call dispi_set_id
1072	no_vbe_interface:
1073	#if defined(DEBUG)
1074	mov bx, #msg_vbe_init
1075	push bx
1076	call _printf
1077	inc sp
1078	inc sp
1079	#endif
1080	ret
1081
1082	#ifndef VBOX
1083	; VBE Display Info - Display information on screen about the VBE
1084
1085	vbe_display_info:
1086	call _vbe_has_vbe_display
1087	test ax, ax
1088	jz no_vbe_flag
1089	mov ax, #0xc000
1090	mov ds, ax
1091	mov si, #_vbebios_info_string
1092	jmp _display_string
1093	no_vbe_flag:
1094	mov ax, #0xc000
1095	mov ds, ax
1096	mov si, #_no_vbebios_info_string
1097	jmp _display_string
1098	#endif
1099
1100	ASM_END
1101
1102	/** Function 00h - Return VBE Controller Information
1103	*
1104	* Input:
1105	* AX = 4F00h
1106	* ES:DI = Pointer to buffer in which to place VbeInfoBlock structure
1107	* (VbeSignature should be VBE2 when VBE 2.0 information is desired and
1108	* the info block is 512 bytes in size)
1109	* Output:
1110	* AX = VBE Return Status
1111	*
1112	*/
1113	void vbe_biosfn_return_controller_information(AX, ES, DI)
1114	Bit16u *AX;Bit16u ES;Bit16u DI;
1115	{
1116	Bit16u ss=get_SS();
1117	#ifndef VBOX
1118	VbeInfoBlock vbe_info_block;
1119	#endif
1120	Bit16u status;
1121	Bit16u result;
1122	Bit16u vbe2_info;
1123	Bit16u cur_mode=0;
1124	Bit16u cur_ptr=34;
1125	#ifdef VBE_NEW_DYN_LIST
1126	ModeInfoListItem cur_info; / used to get the mode list offset. */
1127	Bit16u sig, vmode;
1128	Bit16u max_bpp=dispi_get_max_bpp();
1129	#else
1130	ModeInfoListItem *cur_info=&mode_info_list;
1131	#endif
1132
1133	#ifdef VBE_NEW_DYN_LIST
1134	/* Read VBE Extra Data signature */
1135	sig = in_word(VBE_EXTRA_PORT, 0);
1136	if (sig != VBEHEADER_MAGIC)
1137	{
1138	result = 0x100;
1139
1140	write_word(ss, AX, result);
1141
1142	printf("Signature NOT found\n");
1143	return;
1144	}
1145	cur_info = sizeof(VBEHeader);
1146	#endif
1147	status = read_word(ss, AX);
1148
1149	#ifdef DEBUG
1150	printf("VBE vbe_biosfn_return_vbe_info ES%x DI%x AX%x\n",ES,DI,status);
1151	#endif
1152
1153	vbe2_info = 0;
1154	#ifdef VBOX
1155	#define RT_OFFSETOF(type, member) ( (int)(unsigned)&( ((type )(void )0)->member) )
1156
1157	/* Don't use a local copy of VbeInfoBlock on the stack; it's too big.
1158	* The Ubuntu 8.04 64 bits splash screen emulator can't handle this.
1159	*/
1160	#ifdef VBE2_NO_VESA_CHECK
1161	#else /* !VBE2_NO_VESA_CHECK */
1162	// check for VBE2 signature
1163	if (((read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[0])) == 'V') &&
1164	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[1])) == 'B') &&
1165	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[2])) == 'E') &&
1166	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[3])) == '2')) \|\|
1167
1168	((read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[0])) == 'V') &&
1169	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[1])) == 'E') &&
1170	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[2])) == 'S') &&
1171	(read_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[3])) == 'A')) )
1172	{
1173	vbe2_info = 1;
1174	#ifdef DEBUG
1175	printf("VBE correct VESA/VBE2 signature found\n");
1176	#endif
1177	}
1178	#endif /* !VBE2_NO_VESA_CHECK */
1179
1180	// VBE Signature
1181	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[0]), 'V');
1182	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[1]), 'E');
1183	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[2]), 'S');
1184	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeSignature[3]), 'A');
1185
1186	// VBE Version supported
1187	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, VbeVersion), 0x0200);
1188
1189	// OEM String
1190	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemStringPtr_Seg), 0xc000);
1191	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemStringPtr_Off), &vbebios_copyright);
1192
1193	// Capabilities
1194	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, Capabilities[0]), VBE_CAPABILITY_8BIT_DAC);
1195	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, Capabilities[1]), 0);
1196	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, Capabilities[2]), 0);
1197	write_byte(ES, DI + RT_OFFSETOF(VbeInfoBlock, Capabilities[3]), 0);
1198
1199	// VBE Video Mode Pointer (dynamicly generated from the mode_info_list)
1200	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, VideoModePtr_Seg), ES);
1201	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, VideoModePtr_Off), DI + 34);
1202
1203	// VBE Total Memory (in 64b blocks)
1204	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, TotalMemory), in_word(VBE_EXTRA_PORT, 0xffff));
1205
1206	if (vbe2_info)
1207	{
1208	// OEM Stuff
1209	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemSoftwareRev), VBE_OEM_SOFTWARE_REV);
1210	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemVendorNamePtr_Seg), 0xc000);
1211	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemVendorNamePtr_Off), &vbebios_vendor_name);
1212	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemProductNamePtr_Seg), 0xc000);
1213	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemProductNamePtr_Off), &vbebios_product_name);
1214	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemProductRevPtr_Seg), 0xc000);
1215	write_word(ES, DI + RT_OFFSETOF(VbeInfoBlock, OemProductRevPtr_Off), &vbebios_product_revision);
1216	}
1217	#else /* !VBOX */
1218	// get vbe_info_block into local variable
1219	memcpyb(ss, &vbe_info_block, ES, DI, sizeof(vbe_info_block));
1220
1221	#ifdef VBE2_NO_VESA_CHECK
1222	#else
1223	// check for VBE2 signature
1224	if (((vbe_info_block.VbeSignature[0] == 'V') &&
1225	(vbe_info_block.VbeSignature[1] == 'B') &&
1226	(vbe_info_block.VbeSignature[2] == 'E') &&
1227	(vbe_info_block.VbeSignature[3] == '2')) \|\|
1228
1229	((vbe_info_block.VbeSignature[0] == 'V') &&
1230	(vbe_info_block.VbeSignature[1] == 'E') &&
1231	(vbe_info_block.VbeSignature[2] == 'S') &&
1232	(vbe_info_block.VbeSignature[3] == 'A')) )
1233	{
1234	vbe2_info = 1;
1235	#ifdef DEBUG
1236	printf("VBE correct VESA/VBE2 signature found\n");
1237	#endif
1238	}
1239	#endif
1240
1241	// VBE Signature
1242	vbe_info_block.VbeSignature[0] = 'V';
1243	vbe_info_block.VbeSignature[1] = 'E';
1244	vbe_info_block.VbeSignature[2] = 'S';
1245	vbe_info_block.VbeSignature[3] = 'A';
1246
1247	// VBE Version supported
1248	vbe_info_block.VbeVersion = 0x0200;
1249
1250	// OEM String
1251	vbe_info_block.OemStringPtr_Seg = 0xc000;
1252	vbe_info_block.OemStringPtr_Off = &vbebios_copyright;
1253
1254	// Capabilities
1255	vbe_info_block.Capabilities[0] = VBE_CAPABILITY_8BIT_DAC;
1256	vbe_info_block.Capabilities[1] = 0;
1257	vbe_info_block.Capabilities[2] = 0;
1258	vbe_info_block.Capabilities[3] = 0;
1259
1260	// VBE Video Mode Pointer (dynamicly generated from the mode_info_list)
1261	vbe_info_block.VideoModePtr_Seg= ES ;
1262	vbe_info_block.VideoModePtr_Off= DI + 34;
1263
1264	// VBE Total Memory (in 64b blocks)
1265	vbe_info_block.TotalMemory = in_word(VBE_EXTRA_PORT, 0xffff);
1266
1267	if (vbe2_info)
1268	{
1269	// OEM Stuff
1270	vbe_info_block.OemSoftwareRev = VBE_OEM_SOFTWARE_REV;
1271	vbe_info_block.OemVendorNamePtr_Seg = 0xc000;
1272	vbe_info_block.OemVendorNamePtr_Off = &vbebios_vendor_name;
1273	vbe_info_block.OemProductNamePtr_Seg = 0xc000;
1274	vbe_info_block.OemProductNamePtr_Off = &vbebios_product_name;
1275	vbe_info_block.OemProductRevPtr_Seg = 0xc000;
1276	vbe_info_block.OemProductRevPtr_Off = &vbebios_product_revision;
1277
1278	// copy updates in vbe_info_block back
1279	memcpyb(ES, DI, ss, &vbe_info_block, sizeof(vbe_info_block));
1280	}
1281	else
1282	{
1283	// copy updates in vbe_info_block back (VBE 1.x compatibility)
1284	memcpyb(ES, DI, ss, &vbe_info_block, 256);
1285	}
1286	#endif /* !VBOX */
1287
1288	#ifdef VBE_NEW_DYN_LIST
1289	do
1290	{
1291	Bit16u data;
1292	Bit8u data_b;
1293
1294	data_b = in_byte(VBE_EXTRA_PORT, &cur_info->info.BitsPerPixel);
1295	if (data_b <= max_bpp)
1296	{
1297	vmode = in_word(VBE_EXTRA_PORT, &cur_info->mode);
1298	#ifdef DEBUG
1299	printf("VBE found mode %x => %x\n", vmode, cur_mode);
1300	#endif
1301	write_word(ES, DI + cur_ptr, vmode);
1302	cur_mode++;
1303	cur_ptr+=2;
1304	}
1305	cur_info++;
1306	vmode = in_word(VBE_EXTRA_PORT, &cur_info->mode);
1307	} while (vmode != VBE_VESA_MODE_END_OF_LIST);
1308
1309	// Add vesa mode list terminator
1310	write_word(ES, DI + cur_ptr, vmode);
1311	#else
1312	do
1313	{
1314	if (cur_info->info.BitsPerPixel <= max_bpp) {
1315	#ifdef DEBUG
1316	printf("VBE found mode %x => %x\n", cur_info->mode,cur_mode);
1317	#endif
1318	write_word(ES, DI + cur_ptr, cur_info->mode);
1319	cur_mode++;
1320	cur_ptr+=2;
1321	}
1322	cur_info++;
1323	} while (cur_info->mode != VBE_VESA_MODE_END_OF_LIST);
1324
1325	// Add vesa mode list terminator
1326	write_word(ES, DI + cur_ptr, cur_info->mode);
1327	#endif // VBE_NEW_DYN_LIST
1328
1329	result = 0x4f;
1330
1331	write_word(ss, AX, result);
1332	}
1333
1334
1335	/** Function 01h - Return VBE Mode Information
1336	*
1337	* Input:
1338	* AX = 4F01h
1339	* CX = Mode Number
1340	* ES:DI = Pointer to buffer in which to place ModeInfoBlock structure
1341	* Output:
1342	* AX = VBE Return Status
1343	*
1344	*/
1345	void vbe_biosfn_return_mode_information(AX, CX, ES, DI)
1346	Bit16u *AX;Bit16u CX; Bit16u ES;Bit16u DI;
1347	{
1348	Bit16u result=0x0100;
1349	Bit16u ss=get_SS();
1350	ModeInfoBlock info;
1351	ModeInfoListItem *cur_info;
1352	Boolean using_lfb;
1353
1354	#ifdef DEBUG
1355	printf("VBE vbe_biosfn_return_mode_information ES%x DI%x CX%x\n",ES,DI,CX);
1356	#endif
1357
1358	using_lfb=((CX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
1359
1360	CX = (CX & 0x1ff);
1361
1362	cur_info = mode_info_find_mode(CX, using_lfb, &cur_info);
1363
1364	if (cur_info != 0)
1365	{
1366	#ifdef VBE_NEW_DYN_LIST
1367	Bit16u i;
1368	#endif
1369	#ifdef DEBUG
1370	printf("VBE found mode %x\n",CX);
1371	#endif
1372	memsetb(ss, &info, 0, sizeof(ModeInfoBlock));
1373	#ifdef VBE_NEW_DYN_LIST
1374	for (i = 0; i < sizeof(ModeInfoBlockCompact); i++)
1375	{
1376	Bit8u b;
1377
1378	b = in_byte(VBE_EXTRA_PORT, (char *)(&(cur_info->info)) + i);
1379	write_byte(ss, (char *)(&info) + i, b);
1380	}
1381	#else
1382	memcpyb(ss, &info, 0xc000, &(cur_info->info), sizeof(ModeInfoBlockCompact));
1383	#endif
1384	if (info.WinAAttributes & VBE_WINDOW_ATTRIBUTE_RELOCATABLE) {
1385	info.WinFuncPtr = 0xC0000000UL;
1386	(Bit16u )&(info.WinFuncPtr) = (Bit16u)(dispi_set_bank_farcall);
1387	}
1388
1389	result = 0x4f;
1390	}
1391	else
1392	{
1393	#ifdef DEBUG
1394	printf("VBE NOT found mode %x\n",CX);
1395	#endif
1396	result = 0x100;
1397	}
1398
1399	if (result == 0x4f)
1400	{
1401	// copy updates in mode_info_block back
1402	memcpyb(ES, DI, ss, &info, sizeof(info));
1403	}
1404
1405	write_word(ss, AX, result);
1406	}
1407
1408	/** Function 02h - Set VBE Mode
1409	*
1410	* Input:
1411	* AX = 4F02h
1412	* BX = Desired Mode to set
1413	* ES:DI = Pointer to CRTCInfoBlock structure
1414	* Output:
1415	* AX = VBE Return Status
1416	*
1417	*/
1418	void vbe_biosfn_set_mode(AX, BX, ES, DI)
1419	Bit16u *AX;Bit16u BX; Bit16u ES;Bit16u DI;
1420	{
1421	Bit16u ss = get_SS();
1422	Bit16u result;
1423	ModeInfoListItem *cur_info;
1424	Boolean using_lfb;
1425	Bit8u no_clear;
1426	Bit8u lfb_flag;
1427
1428	using_lfb=((BX & VBE_MODE_LINEAR_FRAME_BUFFER) == VBE_MODE_LINEAR_FRAME_BUFFER);
1429	lfb_flag=using_lfb?VBE_DISPI_LFB_ENABLED:0;
1430	no_clear=((BX & VBE_MODE_PRESERVE_DISPLAY_MEMORY) == VBE_MODE_PRESERVE_DISPLAY_MEMORY)?VBE_DISPI_NOCLEARMEM:0;
1431
1432	BX = (BX & 0x1ff);
1433
1434	//result=read_word(ss,AX);
1435
1436	// check for non vesa mode
1437	if (BX<VBE_MODE_VESA_DEFINED)
1438	{
1439	Bit8u mode;
1440
1441	dispi_set_enable(VBE_DISPI_DISABLED);
1442	// call the vgabios in order to set the video mode
1443	// this allows for going back to textmode with a VBE call (some applications expect that to work)
1444
1445	mode=(BX & 0xff);
1446	biosfn_set_video_mode(mode);
1447	result = 0x4f;
1448	goto leave;
1449	}
1450
1451	cur_info = mode_info_find_mode(BX, using_lfb, &cur_info);
1452
1453	if (cur_info != 0)
1454	{
1455	#ifdef VBE_NEW_DYN_LIST
1456	Bit16u data;
1457	Bit8u data_b;
1458	Bit16u x, y;
1459	Bit8u bpp;
1460
1461	x = in_word(VBE_EXTRA_PORT, &cur_info->info.XResolution); /* cur_info is really an offset here */
1462	y = in_word(VBE_EXTRA_PORT, &cur_info->info.YResolution);
1463	bpp = in_byte(VBE_EXTRA_PORT, &cur_info->info.BitsPerPixel);
1464
1465	#ifdef DEBUG
1466	printf("VBE found mode %x, setting:\n", BX);
1467	printf("\txres%x yres%x bpp%x\n", x, y, bpp);
1468	#endif
1469	#else
1470	#ifdef DEBUG
1471	printf("VBE found mode %x, setting:\n", BX);
1472	printf("\txres%x yres%x bpp%x\n",
1473	cur_info->info.XResolution,
1474	cur_info->info.YResolution,
1475	cur_info->info.BitsPerPixel);
1476	#endif
1477	#endif // VBE_NEW_DYN_LIST
1478
1479	// first disable current mode (when switching between vesa modi)
1480	dispi_set_enable(VBE_DISPI_DISABLED);
1481
1482	#ifdef VBE_NEW_DYN_LIST
1483	data = in_word(VBE_EXTRA_PORT, &cur_info->mode);
1484	if (data == VBE_VESA_MODE_800X600X4)
1485	#else
1486	if (cur_info->mode == VBE_VESA_MODE_800X600X4)
1487	#endif
1488	{
1489	biosfn_set_video_mode(0x6a);
1490	}
1491
1492	#ifdef VBE_NEW_DYN_LIST
1493	data_b = in_byte(VBE_EXTRA_PORT, &cur_info->info.BitsPerPixel);
1494	dispi_set_bpp(data_b);
1495	data = in_word(VBE_EXTRA_PORT, &cur_info->info.XResolution);
1496	dispi_set_xres(data);
1497	data = in_word(VBE_EXTRA_PORT, &cur_info->info.YResolution);
1498	dispi_set_yres(data);
1499	#else
1500	dispi_set_bpp(cur_info->info.BitsPerPixel);
1501	dispi_set_xres(cur_info->info.XResolution);
1502	dispi_set_yres(cur_info->info.YResolution);
1503	#endif
1504	dispi_set_bank(0);
1505	dispi_set_enable(VBE_DISPI_ENABLED \| no_clear \| lfb_flag);
1506	vga_compat_setup();
1507
1508	write_word(BIOSMEM_SEG,BIOSMEM_VBE_MODE,BX);
1509	write_byte(BIOSMEM_SEG,BIOSMEM_VIDEO_CTL,(0x60 \| no_clear));
1510
1511	result = 0x4f;
1512	}
1513	else
1514	{
1515	#ifdef DEBUG
1516	printf("VBE NOT found mode %x\n" , BX);
1517	#endif
1518	result = 0x100;
1519	}
1520
1521	leave:
1522	write_word(ss, AX, result);
1523	}
1524
1525	/** Function 03h - Return Current VBE Mode
1526	*
1527	* Input:
1528	* AX = 4F03h
1529	* Output:
1530	* AX = VBE Return Status
1531	* BX = Current VBE Mode
1532	*
1533	*/
1534	ASM_START
1535	vbe_biosfn_return_current_mode:
1536	push ds
1537	mov ax, # BIOSMEM_SEG
1538	mov ds, ax
1539	call dispi_get_enable
1540	and ax, # VBE_DISPI_ENABLED
1541	jz no_vbe_mode
1542	mov bx, # BIOSMEM_VBE_MODE
1543	mov ax, [bx]
1544	mov bx, ax
1545	jnz vbe_03_ok
1546	no_vbe_mode:
1547	mov bx, # BIOSMEM_CURRENT_MODE
1548	mov al, [bx]
1549	mov bl, al
1550	xor bh, bh
1551	vbe_03_ok:
1552	mov ax, #0x004f
1553	pop ds
1554	ret
1555	ASM_END
1556
1557	Bit16u vbe_biosfn_read_video_state_size()
1558	{
1559	return 9 * 2;
1560	}
1561
1562	void vbe_biosfn_save_video_state(ES, BX)
1563	Bit16u ES; Bit16u BX;
1564	{
1565	Bit16u enable, i;
1566
1567	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
1568	enable = inw(VBE_DISPI_IOPORT_DATA);
1569	write_word(ES, BX, enable);
1570	BX += 2;
1571	if (!(enable & VBE_DISPI_ENABLED))
1572	return;
1573	for(i = VBE_DISPI_INDEX_XRES; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) {
1574	if (i != VBE_DISPI_INDEX_ENABLE) {
1575	outw(VBE_DISPI_IOPORT_INDEX, i);
1576	write_word(ES, BX, inw(VBE_DISPI_IOPORT_DATA));
1577	BX += 2;
1578	}
1579	}
1580	}
1581
1582
1583	void vbe_biosfn_restore_video_state(ES, BX)
1584	Bit16u ES; Bit16u BX;
1585	{
1586	Bit16u enable, i;
1587
1588	enable = read_word(ES, BX);
1589	BX += 2;
1590
1591	if (!(enable & VBE_DISPI_ENABLED)) {
1592	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
1593	outw(VBE_DISPI_IOPORT_DATA, enable);
1594	} else {
1595	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_XRES);
1596	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
1597	BX += 2;
1598	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES);
1599	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
1600	BX += 2;
1601	outw(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP);
1602	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
1603	BX += 2;
1604	outw(VBE_DISPI_IOPORT_INDEX,VBE_DISPI_INDEX_ENABLE);
1605	outw(VBE_DISPI_IOPORT_DATA, enable);
1606
1607	for(i = VBE_DISPI_INDEX_BANK; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) {
1608	outw(VBE_DISPI_IOPORT_INDEX, i);
1609	outw(VBE_DISPI_IOPORT_DATA, read_word(ES, BX));
1610	BX += 2;
1611	}
1612	}
1613	}
1614
1615	/** Function 04h - Save/Restore State
1616	*
1617	* Input:
1618	* AX = 4F04h
1619	* DL = 00h Return Save/Restore State buffer size
1620	* 01h Save State
1621	* 02h Restore State
1622	* CX = Requested states
1623	* ES:BX = Pointer to buffer (if DL <> 00h)
1624	* Output:
1625	* AX = VBE Return Status
1626	* BX = Number of 64-byte blocks to hold the state buffer (if DL=00h)
1627	*
1628	*/
1629	void vbe_biosfn_save_restore_state(AX, CX, DX, ES, BX)
1630	Bit16u AX; Bit16u CX; Bit16u DX; Bit16u ES; Bit16u BX;
1631	{
1632	Bit16u ss=get_SS();
1633	Bit16u result, val;
1634
1635	result = 0x4f;
1636	switch(GET_DL()) {
1637	case 0x00:
1638	val = biosfn_read_video_state_size2(CX);
1639	#ifdef DEBUG
1640	printf("VGA state size=%x\n", val);
1641	#endif
1642	if (CX & 8)
1643	val += vbe_biosfn_read_video_state_size();
1644	write_word(ss, BX, val);
1645	break;
1646	case 0x01:
1647	val = read_word(ss, BX);
1648	val = biosfn_save_video_state(CX, ES, val);
1649	#ifdef DEBUG
1650	printf("VGA save_state offset=%x\n", val);
1651	#endif
1652	if (CX & 8)
1653	vbe_biosfn_save_video_state(ES, val);
1654	break;
1655	case 0x02:
1656	val = read_word(ss, BX);
1657	val = biosfn_restore_video_state(CX, ES, val);
1658	#ifdef DEBUG
1659	printf("VGA restore_state offset=%x\n", val);
1660	#endif
1661	if (CX & 8)
1662	vbe_biosfn_restore_video_state(ES, val);
1663	break;
1664	default:
1665	// function failed
1666	result = 0x100;
1667	break;
1668	}
1669	write_word(ss, AX, result);
1670	}
1671
1672
1673	/** Function 05h - Display Window Control
1674	*
1675	* Input:
1676	* AX = 4F05h
1677	* (16-bit) BH = 00h Set memory window
1678	* = 01h Get memory window
1679	* BL = Window number
1680	* = 00h Window A
1681	* = 01h Window B
1682	* DX = Window number in video memory in window
1683	* granularity units (Set Memory Window only)
1684	* Note:
1685	* If this function is called while in a linear frame buffer mode,
1686	* this function must fail with completion code AH=03h
1687	*
1688	* Output:
1689	* AX = VBE Return Status
1690	* DX = Window number in window granularity units
1691	* (Get Memory Window only)
1692	*/
1693	ASM_START
1694	vbe_biosfn_display_window_control:
1695	cmp bl, #0x00
1696	jne vbe_05_failed
1697	cmp bh, #0x01
1698	je get_display_window
1699	jb set_display_window
1700	mov ax, #0x0100
1701	ret
1702	set_display_window:
1703	mov ax, dx
1704	call _dispi_set_bank
1705	call dispi_get_bank
1706	cmp ax, dx
1707	jne vbe_05_failed
1708	mov ax, #0x004f
1709	ret
1710	get_display_window:
1711	call dispi_get_bank
1712	mov dx, ax
1713	mov ax, #0x004f
1714	ret
1715	vbe_05_failed:
1716	mov ax, #0x014f
1717	ret
1718	ASM_END
1719
1720
1721	/** Function 06h - Set/Get Logical Scan Line Length
1722	*
1723	* Input:
1724	* AX = 4F06h
1725	* BL = 00h Set Scan Line Length in Pixels
1726	* = 01h Get Scan Line Length
1727	* = 02h Set Scan Line Length in Bytes
1728	* = 03h Get Maximum Scan Line Length
1729	* CX = If BL=00h Desired Width in Pixels
1730	* If BL=02h Desired Width in Bytes
1731	* (Ignored for Get Functions)
1732	*
1733	* Output:
1734	* AX = VBE Return Status
1735	* BX = Bytes Per Scan Line
1736	* CX = Actual Pixels Per Scan Line
1737	* (truncated to nearest complete pixel)
1738	* DX = Maximum Number of Scan Lines
1739	*/
1740	ASM_START
1741	vbe_biosfn_set_get_logical_scan_line_length:
1742	mov ax, cx
1743	cmp bl, #0x01
1744	je get_logical_scan_line_length
1745	cmp bl, #0x02
1746	je set_logical_scan_line_bytes
1747	jb set_logical_scan_line_pixels
1748	mov ax, #0x0100
1749	ret
1750	set_logical_scan_line_bytes:
1751	push ax
1752	call dispi_get_bpp
1753	xor bh, bh
1754	mov bl, ah
1755	or bl, bl
1756	jnz no_4bpp_1
1757	shl ax, #3
1758	mov bl, #1
1759	no_4bpp_1:
1760	xor dx, dx
1761	pop ax
1762	div bx
1763	set_logical_scan_line_pixels:
1764	call dispi_set_virt_width
1765	get_logical_scan_line_length:
1766	call dispi_get_bpp
1767	xor bh, bh
1768	mov bl, ah
1769	call dispi_get_virt_width
1770	mov cx, ax
1771	or bl, bl
1772	jnz no_4bpp_2
1773	shr ax, #3
1774	mov bl, #1
1775	no_4bpp_2:
1776	mul bx
1777	mov bx, ax
1778	call dispi_get_virt_height
1779	mov dx, ax
1780	mov ax, #0x004f
1781	ret
1782	ASM_END
1783
1784
1785	/** Function 07h - Set/Get Display Start
1786	*
1787	* Input(16-bit):
1788	* AX = 4F07h
1789	* BH = 00h Reserved and must be 00h
1790	* BL = 00h Set Display Start
1791	* = 01h Get Display Start
1792	* = 02h Schedule Display Start (Alternate)
1793	* = 03h Schedule Stereoscopic Display Start
1794	* = 04h Get Scheduled Display Start Status
1795	* = 05h Enable Stereoscopic Mode
1796	* = 06h Disable Stereoscopic Mode
1797	* = 80h Set Display Start during Vertical Retrace
1798	* = 82h Set Display Start during Vertical Retrace (Alternate)
1799	* = 83h Set Stereoscopic Display Start during Vertical Retrace
1800	* ECX = If BL=02h/82h Display Start Address in bytes
1801	* If BL=03h/83h Left Image Start Address in bytes
1802	* EDX = If BL=03h/83h Right Image Start Address in bytes
1803	* CX = If BL=00h/80h First Displayed Pixel In Scan Line
1804	* DX = If BL=00h/80h First Displayed Scan Line
1805	*
1806	* Output:
1807	* AX = VBE Return Status
1808	* BH = If BL=01h Reserved and will be 0
1809	* CX = If BL=01h First Displayed Pixel In Scan Line
1810	* If BL=04h 0 if flip has not occurred, not 0 if it has
1811	* DX = If BL=01h First Displayed Scan Line
1812	*
1813	* Input(32-bit):
1814	* BH = 00h Reserved and must be 00h
1815	* BL = 00h Set Display Start
1816	* = 80h Set Display Start during Vertical Retrace
1817	* CX = Bits 0-15 of display start address
1818	* DX = Bits 16-31 of display start address
1819	* ES = Selector for memory mapped registers
1820	*/
1821	ASM_START
1822	vbe_biosfn_set_get_display_start:
1823	cmp bl, #0x80
1824	je set_display_start
1825	cmp bl, #0x01
1826	je get_display_start
1827	jb set_display_start
1828	mov ax, #0x0100
1829	ret
1830	set_display_start:
1831	mov ax, cx
1832	call dispi_set_x_offset
1833	mov ax, dx
1834	call dispi_set_y_offset
1835	mov ax, #0x004f
1836	ret
1837	get_display_start:
1838	call dispi_get_x_offset
1839	mov cx, ax
1840	call dispi_get_y_offset
1841	mov dx, ax
1842	xor bh, bh
1843	mov ax, #0x004f
1844	ret
1845	ASM_END
1846
1847
1848	/** Function 08h - Set/Get Dac Palette Format
1849	*
1850	* Input:
1851	* AX = 4F08h
1852	* BL = 00h set DAC palette width
1853	* = 01h get DAC palette width
1854	* BH = If BL=00h: desired number of bits per primary color
1855	* Output:
1856	* AX = VBE Return Status
1857	* BH = current number of bits per primary color (06h = standard VGA)
1858	*/
1859	ASM_START
1860	vbe_biosfn_set_get_dac_palette_format:
1861	cmp bl, #0x01
1862	je get_dac_palette_format
1863	jb set_dac_palette_format
1864	mov ax, #0x0100
1865	ret
1866	set_dac_palette_format:
1867	call dispi_get_enable
1868	cmp bh, #0x06
1869	je set_normal_dac
1870	cmp bh, #0x08
1871	jne vbe_08_unsupported
1872	or ax, # VBE_DISPI_8BIT_DAC
1873	jnz set_dac_mode
1874	set_normal_dac:
1875	and ax, #~ VBE_DISPI_8BIT_DAC
1876	set_dac_mode:
1877	call _dispi_set_enable
1878	get_dac_palette_format:
1879	mov bh, #0x06
1880	call dispi_get_enable
1881	and ax, # VBE_DISPI_8BIT_DAC
1882	jz vbe_08_ok
1883	mov bh, #0x08
1884	vbe_08_ok:
1885	mov ax, #0x004f
1886	ret
1887	vbe_08_unsupported:
1888	mov ax, #0x014f
1889	ret
1890	ASM_END
1891
1892
1893	/** Function 09h - Set/Get Palette Data
1894	*
1895	* Input:
1896	* AX = 4F09h
1897	* (16-bit) BL = 00h Set palette data
1898	* = 01h Get palette data
1899	* = 02h Set secondary palette data
1900	* = 03h Get secondary palette data
1901	* = 80h Set palette data during VRetrace
1902	* CX = Number of entries to update (<= 256)
1903	* DX = First entry to update
1904	* ES:DI = Table of palette values
1905	* Output:
1906	* AX = VBE Return Status
1907	*
1908	* Notes:
1909	* Secondary palette support is a "future extension".
1910	* Attempts to set/get it should return status 02h.
1911	*
1912	* In VBE 3.0, reading palette data is optional and
1913	* subfunctions 01h and 03h may return failure.
1914	*
1915	* The format of palette entries is as follows:
1916	*
1917	* PaletteEntry struc
1918	* Blue db ? ; Blue channel value (6 or 8 bits)
1919	* Green db ? ; Green channel value (6 or 8 bits)
1920	* Red db ? ; Red channel value (6 or 8 bits)
1921	* Padding db ? ; DWORD alignment byte (unused)
1922	* PaletteEntry ends
1923	*
1924	* Most applications use VGA DAC registers directly to
1925	* set/get palette in VBE modes. However, subfn 4F09h is
1926	* required for NonVGA controllers (eg. XGA).
1927	*/
1928	ASM_START
1929	vbe_biosfn_set_get_palette_data:
1930	test bl, bl
1931	jz set_palette_data
1932	cmp bl, #0x01
1933	je get_palette_data
1934	cmp bl, #0x03
1935	jbe vbe_09_nohw
1936	cmp bl, #0x80
1937	jne vbe_09_unsupported
1938	#if 0
1939	/* this is where we could wait for vertical retrace */
1940	#endif
1941	set_palette_data:
1942	pushad
1943	push ds
1944	push es
1945	pop ds
1946	mov al, dl
1947	mov dx, # VGAREG_DAC_WRITE_ADDRESS
1948	out dx, al
1949	inc dx
1950	mov si, di
1951	set_pal_loop:
1952	lodsd
1953	ror eax, #16
1954	out dx, al
1955	rol eax, #8
1956	out dx, al
1957	rol eax, #8
1958	out dx, al
1959	loop set_pal_loop
1960	pop ds
1961	popad
1962	vbe_09_ok:
1963	mov ax, #0x004f
1964	ret
1965
1966	get_palette_data:
1967	pushad
1968	mov al, dl
1969	mov dx, # VGAREG_DAC_READ_ADDRESS
1970	out dx, al
1971	add dl, #2
1972	get_pal_loop:
1973	xor eax, eax
1974	in al, dx
1975	shl eax, #8
1976	in al, dx
1977	shl eax, #8
1978	in al, dx
1979	stosd
1980	loop get_pal_loop
1981	popad
1982	jmp vbe_09_ok
1983
1984	vbe_09_unsupported:
1985	mov ax, #0x014f
1986	ret
1987	vbe_09_nohw:
1988	mov ax, #0x024f
1989	ret
1990	ASM_END
1991
1992
1993	/** Function 0Ah - Return VBE Protected Mode Interface
1994	*
1995	* Input: AX = 4F0Ah VBE 2.0 Protected Mode Interface
1996	* BL = 00h Return protected mode table
1997	* Output: AX = Status
1998	* ES = Real Mode Segment of Table
1999	* DI = Offset of Table
2000	* CX = Length of Table including protected mode code
2001	* (for copying purposes)
2002	*/
2003	ASM_START
2004	vbe_biosfn_return_protected_mode_interface:
2005	test bl, bl
2006	jnz _fail
2007	mov di, #0xc000
2008	mov es, di
2009	mov di, # vesa_pm_start
2010	mov cx, # vesa_pm_end
2011	sub cx, di
2012	mov ax, #0x004f
2013	ret
2014	_fail:
2015	mov ax, #0x014f
2016	ret
2017	ASM_END

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Graphics/BIOS/vbe.c@ 18265

Download in other formats: