FlashCore.cpp@ 89394

Last change on this file since 89394 was 82968, checked in by vboxsync, 5 years ago
Copyright year updates by scm.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 21.6 KB

Line
1	/* $Id: FlashCore.cpp 82968 2020-02-04 10:35:17Z vboxsync $ */
2	/** @file
3	* DevFlash - A simple Flash device
4	*
5	* A simple non-volatile byte-wide (x8) memory device modeled after Intel 28F008
6	* FlashFile. See 28F008SA datasheet, Intel order number 290429-007.
7	*
8	* Implemented as an MMIO device attached directly to the CPU, not behind any
9	* bus. Typically mapped as part of the firmware image.
10	*/
11
12	/*
13	* Copyright (C) 2018-2020 Oracle Corporation
14	*
15	* This file is part of VirtualBox Open Source Edition (OSE), as
16	* available from http://www.virtualbox.org. This file is free software;
17	* you can redistribute it and/or modify it under the terms of the GNU
18	* General Public License (GPL) as published by the Free Software
19	* Foundation, in version 2 as it comes in the "COPYING" file of the
20	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
21	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
22	*/
23
24
25	/*********************************************************************************************************************************
26	* Header Files *
27	*********************************************************************************************************************************/
28	#define LOG_GROUP LOG_GROUP_DEV_FLASH
29	#include <VBox/vmm/pdmdev.h>
30	#include <VBox/log.h>
31	#include <VBox/err.h>
32	#include <iprt/assert.h>
33	#include <iprt/string.h>
34	#include <iprt/file.h>
35
36	#include "VBoxDD.h"
37	#include "FlashCore.h"
38
39
40	/*********************************************************************************************************************************
41	* Defined Constants And Macros *
42	*********************************************************************************************************************************/
43	/** @name CUI (Command User Interface) Commands.
44	* @{ */
45	#define FLASH_CMD_ALT_WRITE 0x10
46	#define FLASH_CMD_ERASE_SETUP 0x20
47	#define FLASH_CMD_WRITE 0x40
48	#define FLASH_CMD_STS_CLEAR 0x50
49	#define FLASH_CMD_STS_READ 0x70
50	#define FLASH_CMD_READ_ID 0x90
51	#define FLASH_CMD_ERASE_SUS_RES 0xB0
52	#define FLASH_CMD_ERASE_CONFIRM 0xD0
53	#define FLASH_CMD_ARRAY_READ 0xFF
54	/** @} */
55
56	/** @name Status register bits.
57	* @{ */
58	#define FLASH_STATUS_WSMS 0x80 /* Write State Machine Status, 1=Ready */
59	#define FLASH_STATUS_ESS 0x40 /* Erase Suspend Status, 1=Suspended */
60	#define FLASH_STATUS_ES 0x20 /* Erase Status, 1=Error */
61	#define FLASH_STATUS_BWS 0x10 /* Byte Write Status, 1=Error */
62	#define FLASH_STATUS_VPPS 0x08 /* Vpp Status, 1=Low Vpp */
63	/* The remaining bits 0-2 are reserved/unused */
64	/** @} */
65
66
67	/*********************************************************************************************************************************
68	* Structures and Typedefs *
69	*********************************************************************************************************************************/
70	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
71
72
73
74	/**
75	* Worker for flashWrite that deals with a single byte.
76	*
77	* @retval VINF_SUCCESS on success, which is always the case in ring-3.
78	* @retval VINF_IOM_R3_MMIO_WRITE can be returned when not in ring-3.
79	*/
80	static int flashMemWriteByte(PFLASHCORE pThis, uint32_t off, uint8_t bCmd)
81	{
82	/* NB: Older datasheets (e.g. 28F008SA) suggest that for two-cycle commands like byte write or
83	* erase setup, the address is significant in both cycles, but do not explain what happens
84	* should the addresses not match. Newer datasheets (e.g. 28F008B3) clearly say that the address
85	* in the first byte cycle never matters. We prefer the latter interpretation.
86	*/
87
88	if (pThis->cBusCycle == 0)
89	{
90	/* First bus write cycle, start processing a new command. Address is ignored. */
91	switch (bCmd)
92	{
93	case FLASH_CMD_ARRAY_READ:
94	case FLASH_CMD_STS_READ:
95	case FLASH_CMD_ERASE_SUS_RES:
96	case FLASH_CMD_READ_ID:
97	/* Single-cycle write commands, only change the current command. */
98	pThis->bCmd = bCmd;
99	break;
100	case FLASH_CMD_STS_CLEAR:
101	/* Status clear continues in read mode. */
102	pThis->bStatus = 0;
103	pThis->bCmd = FLASH_CMD_ARRAY_READ;
104	break;
105	case FLASH_CMD_WRITE:
106	case FLASH_CMD_ALT_WRITE:
107	case FLASH_CMD_ERASE_SETUP:
108	/* Two-cycle commands, advance the bus write cycle. */
109	pThis->bCmd = bCmd;
110	pThis->cBusCycle++;
111	break;
112	default:
113	LogFunc(("1st cycle command %02X, current cmd %02X\n", bCmd, pThis->bCmd));
114	break;
115	}
116	}
117	else
118	{
119	/* Second write of a two-cycle command. */
120	Assert(pThis->cBusCycle == 1);
121	switch (pThis->bCmd)
122	{
123	case FLASH_CMD_WRITE:
124	case FLASH_CMD_ALT_WRITE:
125	if (off < pThis->cbFlashSize)
126	{
127	#ifdef IN_RING3
128	pThis->pbFlash[off] = bCmd;
129	# ifdef FLASH_WITH_RZ_READ_CACHE_SIZE
130	uint32_t const offInCache = off - pThis->offCache;
131	if (offInCache < sizeof(pThis->CacheData) && pThis->offCache != UINT32_MAX)
132	pThis->CacheData.ab[offInCache] = bCmd;
133	# endif
134
135	/* NB: Writes are instant and never fail. */
136	LogFunc(("wrote byte to flash at %08RX32: %02X\n", off, bCmd));
137	#else
138	return VINF_IOM_R3_MMIO_WRITE;
139	#endif
140	}
141	else
142	LogFunc(("ignoring write at %08RX32: %02X\n", off, bCmd));
143	break;
144	case FLASH_CMD_ERASE_SETUP:
145	if (bCmd == FLASH_CMD_ERASE_CONFIRM)
146	{
147	#ifdef IN_RING3
148	/* The current address determines the block to erase. */
149	unsigned uOffset = off & ~(pThis->cbBlockSize - 1);
150	memset(pThis->pbFlash + uOffset, 0xff, pThis->cbBlockSize);
151	LogFunc(("Erasing block at offset %u\n", uOffset));
152	#else
153	return VINF_IOM_R3_MMIO_WRITE;
154	#endif
155	}
156	else
157	{
158	/* Anything else is a command erorr. Transition to status read mode. */
159	LogFunc(("2st cycle erase command is %02X, should be confirm (%02X)\n", bCmd, FLASH_CMD_ERASE_CONFIRM));
160	pThis->bCmd = FLASH_CMD_STS_READ;
161	pThis->bStatus \|= FLASH_STATUS_BWS \| FLASH_STATUS_ES;
162	}
163	break;
164	default:
165	LogFunc(("2st cycle bad command %02X, current cmd %02X\n", bCmd, pThis->bCmd));
166	break;
167	}
168	pThis->cBusCycle = 0;
169	}
170	LogFlow(("flashMemWriteByte: write access at %08RX32: %#x\n", off, bCmd));
171	return VINF_SUCCESS;
172	}
173
174	/**
175	* Performs a write to the given flash offset.
176	*
177	* Parent device calls this from its MMIO write callback.
178	*
179	* @returns Strict VBox status code.
180	* @retval VINF_SUCCESS on success, which is always the case in ring-3.
181	* @retval VINF_IOM_R3_MMIO_WRITE can be returned when not in ring-3.
182	*
183	* @param pThis The UART core instance.
184	* @param off Offset to start writing to.
185	* @param pv The value to write.
186	* @param cb Number of bytes to write.
187	*/
188	DECLHIDDEN(VBOXSTRICTRC) flashWrite(PFLASHCORE pThis, uint32_t off, const void *pv, size_t cb)
189	{
190	const uint8_t pbSrc = (const uint8_t )pv;
191
192	#ifndef IN_RING3
193	/*
194	* If multiple bytes are written, just go to ring-3 and do it there as it's
195	* too much trouble to validate the sequence in adanvce and it is usually
196	* not restartable as device state changes.
197	*/
198	VBOXSTRICTRC rcStrict;
199	if (cb == 1)
200	{
201	rcStrict = flashMemWriteByte(pThis, off, *pbSrc);
202	if (rcStrict == VINF_SUCCESS)
203	LogFlow(("flashWrite: completed write at %08RX32 (LB %u)\n", off, cb));
204	else
205	LogFlow(("flashWrite: incomplete write at %08RX32 (LB %u): rc=%Rrc bCmd=%#x cBusCycle=%u\n",
206	off, cb, VBOXSTRICTRC_VAL(rcStrict), *pbSrc, pThis->cBusCycle));
207	}
208	else
209	{
210	LogFlow(("flashWrite: deferring multi-byte write at %08RX32 (LB %u) to ring-3\n", off, cb));
211	rcStrict = VINF_IOM_R3_IOPORT_WRITE;
212	}
213	return rcStrict;
214
215	#else /* IN_RING3 */
216
217	for (uint32_t offWrite = 0; offWrite < cb; ++offWrite)
218	flashMemWriteByte(pThis, off + offWrite, pbSrc[offWrite]);
219
220	LogFlow(("flashWrite: completed write at %08RX32 (LB %u)\n", off, cb));
221	return VINF_SUCCESS;
222	#endif /* IN_RING3 */
223	}
224
225	#if defined(FLASH_WITH_RZ_READ_CACHE_SIZE) && defined(IN_RING3)
226	/**
227	* Fills the RZ cache with data.
228	*/
229	DECL_FORCE_INLINE(void) flashFillRzCache(PFLASHCORE pThis, uint32_t off)
230	{
231	AssertCompile(RT_IS_POWER_OF_TWO(sizeof(pThis->CacheData)));
232	uint32_t const offCache = (off + 1) & ~(sizeof(pThis->CacheData) - 1);
233	if (offCache < pThis->cbFlashSize)
234	{
235	Log2(("flashMemReadByte: Filling RZ cache: offset %#x\n", offCache));
236	# if FLASH_WITH_RZ_READ_CACHE_SIZE < 8
237	uint64_t const * const pu64Src = ((uint64_t const *)&pThis->pbFlash[offCache]);
238	pThis->CacheData.au64[0] = pu64Src[0];
239	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 1
240	pThis->CacheData.au64[1] = pu64Src[1];
241	# endif
242	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 2
243	pThis->CacheData.au64[2] = pu64Src[2];
244	# endif
245	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 3
246	pThis->CacheData.au64[3] = pu64Src[3];
247	# endif
248	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 4
249	pThis->CacheData.au64[4] = pu64Src[4];
250	# endif
251	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 5
252	pThis->CacheData.au64[5] = pu64Src[5];
253	# endif
254	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 6
255	pThis->CacheData.au64[6] = pu64Src[6];
256	# endif
257	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 7
258	pThis->CacheData.au64[7] = pu64Src[7];
259	# endif
260	# if FLASH_WITH_RZ_READ_CACHE_SIZE > 8
261	pThis->CacheData.au64[8] = pu64Src[8];
262	# endif
263	# else
264	memcpy(pThis->CacheData.ab, &pThis->pbFlash[offCache], sizeof(pThis->CacheData.ab));
265	# endif
266	pThis->offCache = offCache;
267	}
268	}
269	#endif /* FLASH_WITH_RZ_READ_CACHE_SIZE && IN_RING3 */
270
271	/**
272	* Worker for flashRead that deals with a single byte.
273	*
274	* @retval VINF_SUCCESS on success, which is always the case in ring-3.
275	* @retval VINF_IOM_R3_MMIO_READ can be returned when not in ring-3.
276	*/
277	static int flashMemReadByte(PFLASHCORE pThis, uint32_t off, uint8_t *pbData)
278	{
279	uint8_t bValue;
280
281	/*
282	* Reads are only defined in three states: Array read, status register read,
283	* and ID read.
284	*/
285	switch (pThis->bCmd)
286	{
287	case FLASH_CMD_ARRAY_READ:
288	if (off < pThis->cbFlashSize)
289	{
290	#ifdef IN_RING3
291	# ifdef FLASH_WITH_RZ_READ_CACHE_SIZE
292	AssertCompile(RT_IS_POWER_OF_TWO(sizeof(pThis->CacheData)));
293	if (off + 1 - pThis->offCache < sizeof(pThis->CacheData) && pThis->offCache != UINT32_MAX)
294	{ }
295	else
296	flashFillRzCache(pThis, off);
297	# endif
298	bValue = pThis->pbFlash[off];
299	#else
300	# ifdef FLASH_WITH_RZ_READ_CACHE_SIZE
301	uint32_t const offInCache = off - pThis->offCache;
302	if (offInCache < sizeof(pThis->CacheData) && pThis->offCache != UINT32_MAX)
303	{
304	Log2(("flashMemReadByte: cache hit (at %#RX32 in cache)\n", offInCache));
305	bValue = pThis->CacheData.ab[offInCache];
306	}
307	else
308	{
309	Log2(("flashMemReadByte: cache miss: offInCache=%#RX32 offCache=%#RX32\n", offInCache, pThis->offCache));
310	return VINF_IOM_R3_MMIO_READ;
311	}
312	# else
313	return VINF_IOM_R3_MMIO_READ;
314	# endif
315	#endif
316	}
317	else
318	bValue = 0xff; /* Play safe and return the default value of non initialized flash. */
319	LogFunc(("read byte at %08RX32: %02X\n", off, bValue));
320	break;
321	case FLASH_CMD_STS_READ:
322	bValue = pThis->bStatus;
323	break;
324	case FLASH_CMD_READ_ID:
325	bValue = off & 1 ? RT_HI_U8(pThis->u16FlashId) : RT_LO_U8(pThis->u16FlashId);
326	break;
327	default:
328	bValue = 0xff;
329	break;
330	}
331	*pbData = bValue;
332
333	LogFlow(("flashMemReadByte: read access at %08RX32: %02X (cmd=%02X)\n", off, bValue, pThis->bCmd));
334	return VINF_SUCCESS;
335	}
336
337	/**
338	* Performs a read from the given flash offset.
339	*
340	* Parent device calls this from its MMIO read callback.
341	*
342	* @returns Strict VBox status code.
343	* @retval VINF_SUCCESS on success, which is always the case in ring-3.
344	* @retval VINF_IOM_R3_MMIO_READ can be returned when not in ring-3.
345	*
346	* @param pThis The UART core instance.
347	* @param off Offset to start reading from.
348	* @param pv Where to store the read data.
349	* @param cb Number of bytes to read.
350	*/
351	DECLHIDDEN(VBOXSTRICTRC) flashRead(PFLASHCORE pThis, uint32_t off, void *pv, size_t cb)
352	{
353	uint8_t pbDst = (uint8_t )pv;
354
355	/*
356	* Reads do not change the device state, so we don't need to take any
357	* precautions when we're not in ring-3 as the read can always be restarted.
358	*/
359	for (uint32_t offRead = 0; offRead < cb; ++offRead)
360	{
361	#ifdef IN_RING3
362	flashMemReadByte(pThis, off + offRead, &pbDst[offRead]);
363	#else
364	VBOXSTRICTRC rcStrict = flashMemReadByte(pThis, off + offRead, &pbDst[offRead]);
365	if (rcStrict != VINF_SUCCESS)
366	{
367	LogFlow(("flashRead: incomplete read at %08RX32+%#x (LB %u): rc=%Rrc bCmd=%#x\n",
368	off, offRead, cb, VBOXSTRICTRC_VAL(rcStrict), pThis->bCmd));
369	return rcStrict;
370	}
371	#endif
372	}
373
374	LogFlow(("flashRead: completed read at %08RX32 (LB %u)\n", off, cb));
375	return VINF_SUCCESS;
376	}
377
378	#ifdef IN_RING3
379
380	/**
381	* Initialiizes the given flash device instance.
382	*
383	* @returns VBox status code.
384	* @param pThis The flash device core instance.
385	* @param pDevIns Pointer to the owning device instance.
386	* @param idFlashDev The flash device ID.
387	* @param GCPhysFlashBase Base MMIO address where the flash is located.
388	* @param cbFlash Size of the flash device in bytes.
389	* @param cbBlock Size of a flash block.
390	*/
391	DECLHIDDEN(int) flashR3Init(PFLASHCORE pThis, PPDMDEVINS pDevIns, uint16_t idFlashDev, uint32_t cbFlash, uint16_t cbBlock)
392	{
393	pThis->u16FlashId = idFlashDev;
394	pThis->cbBlockSize = cbBlock;
395	pThis->cbFlashSize = cbFlash;
396	#ifdef FLASH_WITH_RZ_READ_CACHE_SIZE
397	pThis->offCache = UINT32_MAX;
398	#endif
399
400	/* Set up the flash data. */
401	pThis->pbFlash = (uint8_t *)PDMDevHlpMMHeapAlloc(pDevIns, pThis->cbFlashSize);
402	if (!pThis->pbFlash)
403	return PDMDEV_SET_ERROR(pDevIns, VERR_NO_MEMORY, N_("Failed to allocate heap memory"));
404
405	/* Default value for empty flash. */
406	memset(pThis->pbFlash, 0xff, pThis->cbFlashSize);
407
408	/* Reset the dynamic state.*/
409	flashR3Reset(pThis);
410	return VINF_SUCCESS;
411	}
412
413	/**
414	* Destroys the given flash device instance.
415	*
416	* @returns nothing.
417	* @param pDevIns The parent device instance.
418	* @param pThis The flash device core instance.
419	*/
420	DECLHIDDEN(void) flashR3Destruct(PFLASHCORE pThis, PPDMDEVINS pDevIns)
421	{
422	if (pThis->pbFlash)
423	{
424	PDMDevHlpMMHeapFree(pDevIns, pThis->pbFlash);
425	pThis->pbFlash = NULL;
426	}
427	}
428
429	/**
430	* Loads the flash content from the given file.
431	*
432	* @returns VBox status code.
433	* @param pThis The flash device core instance.
434	* @param pDevIns The parent device instance.
435	* @param pszFilename The file to load the flash content from.
436	*/
437	DECLHIDDEN(int) flashR3LoadFromFile(PFLASHCORE pThis, PPDMDEVINS pDevIns, const char *pszFilename)
438	{
439	RTFILE hFlashFile = NIL_RTFILE;
440
441	int rc = RTFileOpen(&hFlashFile, pszFilename, RTFILE_O_READ \| RTFILE_O_OPEN \| RTFILE_O_DENY_WRITE);
442	if (RT_FAILURE(rc))
443	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to open flash file"));
444
445	size_t cbRead = 0;
446	rc = RTFileRead(hFlashFile, pThis->pbFlash, pThis->cbFlashSize, &cbRead);
447	if (RT_FAILURE(rc))
448	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to read flash file"));
449	Log(("Read %zu bytes from file (asked for %u)\n.", cbRead, pThis->cbFlashSize));
450
451	RTFileClose(hFlashFile);
452	return VINF_SUCCESS;
453	}
454
455	/**
456	* Loads the flash content from the given buffer.
457	*
458	* @returns VBox status code.
459	* @param pThis The flash device core instance.
460	* @param pvBuf The buffer to load the content from.
461	* @param cbBuf Size of the buffer in bytes.
462	*/
463	DECLHIDDEN(int) flashR3LoadFromBuf(PFLASHCORE pThis, void const *pvBuf, size_t cbBuf)
464	{
465	AssertReturn(pThis->cbFlashSize >= cbBuf, VERR_BUFFER_OVERFLOW);
466
467	memcpy(pThis->pbFlash, pvBuf, RT_MIN(cbBuf, pThis->cbFlashSize));
468	return VINF_SUCCESS;
469	}
470
471	/**
472	* Saves the flash content to the given file.
473	*
474	* @returns VBox status code.
475	* @param pThis The flash device core instance.
476	* @param pDevIns The parent device instance.
477	* @param pszFilename The file to save the flash content to.
478	*/
479	DECLHIDDEN(int) flashR3SaveToFile(PFLASHCORE pThis, PPDMDEVINS pDevIns, const char *pszFilename)
480	{
481	RTFILE hFlashFile = NIL_RTFILE;
482
483	int rc = RTFileOpen(&hFlashFile, pszFilename, RTFILE_O_READWRITE \| RTFILE_O_OPEN_CREATE \| RTFILE_O_DENY_WRITE);
484	if (RT_FAILURE(rc))
485	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to open flash file"));
486
487	rc = RTFileWrite(hFlashFile, pThis->pbFlash, pThis->cbFlashSize, NULL);
488	RTFileClose(hFlashFile);
489	if (RT_FAILURE(rc))
490	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to write flash file"));
491
492	return VINF_SUCCESS;
493	}
494
495	/**
496	* Saves the flash content to the given buffer.
497	*
498	* @returns VBox status code.
499	* @param pThis The flash device core instance.
500	* @param pvBuf The buffer to save the content to.
501	* @param cbBuf Size of the buffer in bytes.
502	*/
503	DECLHIDDEN(int) flashR3SaveToBuf(PFLASHCORE pThis, void *pvBuf, size_t cbBuf)
504	{
505	AssertReturn(pThis->cbFlashSize <= cbBuf, VERR_BUFFER_OVERFLOW);
506
507	memcpy(pvBuf, pThis->pbFlash, RT_MIN(cbBuf, pThis->cbFlashSize));
508	return VINF_SUCCESS;
509	}
510
511	/**
512	* Resets the dynamic part of the flash device state.
513	*
514	* @returns nothing.
515	* @param pThis The flash device core instance.
516	*/
517	DECLHIDDEN(void) flashR3Reset(PFLASHCORE pThis)
518	{
519	/*
520	* Initialize the device state.
521	*/
522	pThis->bCmd = FLASH_CMD_ARRAY_READ;
523	pThis->bStatus = 0;
524	pThis->cBusCycle = 0;
525	}
526
527	/**
528	* Saves the flash device state to the given SSM handle.
529	*
530	* @returns VBox status code.
531	* @param pThis The flash device core instance.
532	* @param pDevIns The parent device instance.
533	* @param pSSM The SSM handle to save to.
534	*/
535	DECLHIDDEN(int) flashR3SaveExec(PFLASHCORE pThis, PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
536	{
537	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
538
539	pHlp->pfnSSMPutU32(pSSM, FLASH_SAVED_STATE_VERSION);
540
541	/* Save the device state. */
542	pHlp->pfnSSMPutU8(pSSM, pThis->bCmd);
543	pHlp->pfnSSMPutU8(pSSM, pThis->bStatus);
544	pHlp->pfnSSMPutU8(pSSM, pThis->cBusCycle);
545
546	/* Save the current configuration for validation purposes. */
547	pHlp->pfnSSMPutU16(pSSM, pThis->cbBlockSize);
548	pHlp->pfnSSMPutU16(pSSM, pThis->u16FlashId);
549
550	/* Save the current flash contents. */
551	pHlp->pfnSSMPutU32(pSSM, pThis->cbFlashSize);
552	return pHlp->pfnSSMPutMem(pSSM, pThis->pbFlash, pThis->cbFlashSize);
553	}
554
555	/**
556	* Loads the flash device state from the given SSM handle.
557	*
558	* @returns VBox status code.
559	* @param pThis The flash device core instance.
560	* @param pDevIns The parent device instance.
561	* @param pSSM The SSM handle to load from.
562	*/
563	DECLHIDDEN(int) flashR3LoadExec(PFLASHCORE pThis, PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
564	{
565	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
566
567	uint32_t uVersion = FLASH_SAVED_STATE_VERSION;
568	int rc = pHlp->pfnSSMGetU32(pSSM, &uVersion);
569	AssertRCReturn(rc, rc);
570
571	/*
572	* Do the actual restoring.
573	*/
574	if (uVersion == FLASH_SAVED_STATE_VERSION)
575	{
576	uint16_t u16Val;
577	uint32_t u32Val;
578
579	pHlp->pfnSSMGetU8(pSSM, &pThis->bCmd);
580	pHlp->pfnSSMGetU8(pSSM, &pThis->bStatus);
581	pHlp->pfnSSMGetU8(pSSM, &pThis->cBusCycle);
582
583	/* Make sure configuration didn't change behind our back. */
584	rc = pHlp->pfnSSMGetU16(pSSM, &u16Val);
585	AssertRCReturn(rc, rc);
586	if (u16Val != pThis->cbBlockSize)
587	return VERR_SSM_LOAD_CONFIG_MISMATCH;
588	rc = pHlp->pfnSSMGetU16(pSSM, &u16Val);
589	AssertRCReturn(rc, rc);
590	if (u16Val != pThis->u16FlashId)
591	return VERR_SSM_LOAD_CONFIG_MISMATCH;
592	rc = pHlp->pfnSSMGetU32(pSSM, &u32Val);
593	AssertRCReturn(rc, rc);
594	if (u32Val != pThis->cbFlashSize)
595	return VERR_SSM_LOAD_CONFIG_MISMATCH;
596
597	/* Suck in the flash contents. */
598	rc = pHlp->pfnSSMGetMem(pSSM, pThis->pbFlash, pThis->cbFlashSize);
599	}
600	else
601	rc = VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
602
603	return rc;
604	}
605
606	#endif /* IN_RING3 */
607
608	#endif /* VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/EFI/FlashCore.cpp@ 89394

Download in other formats: