| 1 | # $Id: Makefile.kmk 58460 2015-10-28 20:34:41Z vboxsync $
|
|---|
| 2 | ## @file
|
|---|
| 3 | # Toplevel sub-makefile for the EFI firmwares.
|
|---|
| 4 | #
|
|---|
| 5 | # Note! kBuild is only used for the build tools, the rest is handled by the
|
|---|
| 6 | # very custom EFI build system.
|
|---|
| 7 | #
|
|---|
| 8 |
|
|---|
| 9 | #
|
|---|
| 10 | # Copyright (C) 2013-2015 Oracle Corporation
|
|---|
| 11 | #
|
|---|
| 12 | # This file is part of VirtualBox Open Source Edition (OSE), as
|
|---|
| 13 | # available from http://www.virtualbox.org. This file is free software;
|
|---|
| 14 | # you can redistribute it and/or modify it under the terms of the GNU
|
|---|
| 15 | # General Public License (GPL) as published by the Free Software
|
|---|
| 16 | # Foundation, in version 2 as it comes in the "COPYING" file of the
|
|---|
| 17 | # VirtualBox OSE distribution. VirtualBox OSE is distributed in the
|
|---|
| 18 | # hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
|
|---|
| 19 | #
|
|---|
| 20 | # The contents of this file may alternatively be used under the terms
|
|---|
| 21 | # of the Common Development and Distribution License Version 1.0
|
|---|
| 22 | # (CDDL) only, as it comes in the "COPYING.CDDL" file of the
|
|---|
| 23 | # VirtualBox OSE distribution, in which case the provisions of the
|
|---|
| 24 | # CDDL are applicable instead of those of the GPL.
|
|---|
| 25 | #
|
|---|
| 26 | # You may elect to license modified versions of this file under the
|
|---|
| 27 | # terms and conditions of either the GPL or the CDDL or both.
|
|---|
| 28 | #
|
|---|
| 29 |
|
|---|
| 30 | SUB_DEPTH = ../../../../..
|
|---|
| 31 | include $(KBUILD_PATH)/subheader.kmk
|
|---|
| 32 |
|
|---|
| 33 | #
|
|---|
| 34 | # Make sure our Config.kmk is included.
|
|---|
| 35 | #
|
|---|
| 36 | ifndef VBOX_EFI_FIRMWARE_CONFIG_KMK_INCLUDED
|
|---|
| 37 | include $(PATH_SUB_CURRENT)/Config.kmk
|
|---|
| 38 | endif
|
|---|
| 39 |
|
|---|
| 40 |
|
|---|
| 41 | #
|
|---|
| 42 | # Include sub-makefiles.
|
|---|
| 43 | #
|
|---|
| 44 | VBOX_EFI_BLDPROGS := $(BLDPROGS)
|
|---|
| 45 | include $(PATH_SUB_CURRENT)/BaseTools/Makefile.kmk
|
|---|
| 46 | VBOX_EFI_BLDPROGS := $(filter-out $(VBOX_EFI_BLDPROGS),$(BLDPROGS)) VBoxEfiBldPythonWrappers
|
|---|
| 47 |
|
|---|
| 48 | #
|
|---|
| 49 | # Binary wrappers for python scripts.
|
|---|
| 50 | #
|
|---|
| 51 | VBOX_EFI_PYTHON_WRAPPERS = \
|
|---|
| 52 | BPDG \
|
|---|
| 53 | build \
|
|---|
| 54 | Ecc \
|
|---|
| 55 | GenFds \
|
|---|
| 56 | GenPatchPcdTable \
|
|---|
| 57 | PatchPcdValue \
|
|---|
| 58 | Trim \
|
|---|
| 59 | TargetTool \
|
|---|
| 60 | UPT
|
|---|
| 61 |
|
|---|
| 62 | INSTALLS += VBoxEfiBldPythonWrappers
|
|---|
| 63 | VBoxEfiBldPythonWrappers_TEMPLATE = VBoxEfiBldProg
|
|---|
| 64 | if1of ($(KBUILD_HOST), win os2)
|
|---|
| 65 | VBoxEfiBldPythonWrappers_EXEC_SOURCES = \
|
|---|
| 66 | $(foreach PyWrap,$(VBOX_EFI_PYTHON_WRAPPERS),$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap).cmd)
|
|---|
| 67 | else
|
|---|
| 68 | VBoxEfiBldPythonWrappers_EXEC_SOURCES = \
|
|---|
| 69 | $(addprefix $(VBoxEfiBldPythonWrappers_0_OUTDIR)/,$(VBOX_EFI_PYTHON_WRAPPERS))
|
|---|
| 70 | endif
|
|---|
| 71 | VBoxEfiBldPythonWrappers_CLEAN = $(VBoxEfiBldPythonWrappers_SOURCES)
|
|---|
| 72 |
|
|---|
| 73 | if1of ($(KBUILD_HOST), win os2)
|
|---|
| 74 | define VBoxEfiBldPythonWrappersRuleTemplate
|
|---|
| 75 | $$$$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap).cmd: | $$$$(dir $$$$@)
|
|---|
| 76 | $$(APPEND) -tn "$$@" \
|
|---|
| 77 | '@SET PYTHONPATH=$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python' \
|
|---|
| 78 | '@"$$(VBOX_BLD_PYTHON)" "$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/$(PyWrap)/$(PyWrap).py" %*'
|
|---|
| 79 | endef
|
|---|
| 80 | else
|
|---|
| 81 | define VBoxEfiBldPythonWrappersRuleTemplate
|
|---|
| 82 | $$$$(VBoxEfiBldPythonWrappers_0_OUTDIR)/$(PyWrap): | $$$$(dir $$$$@)
|
|---|
| 83 | $$(APPEND) -tn "$$@" \
|
|---|
| 84 | '#!$(ASH)' \
|
|---|
| 85 | 'export PYTHONPATH="$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python"' \
|
|---|
| 86 | 'exec "$$(VBOX_BLD_PYTHON)" "$$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/$(PyWrap)/$(PyWrap).py" "$$(DOLLAR)@"'
|
|---|
| 87 | $$(CHMOD) a+x "$$@"
|
|---|
| 88 | endef
|
|---|
| 89 | endif
|
|---|
| 90 | $(foreach PyWrap,$(VBOX_EFI_PYTHON_WRAPPERS),$(eval $(VBoxEfiBldPythonWrappersRuleTemplate)))
|
|---|
| 91 |
|
|---|
| 92 | #
|
|---|
| 93 | # Rules for building and installing the VBox EFI firmware images.
|
|---|
| 94 | #
|
|---|
| 95 | INSTALLS += VBoxEfiFirmware
|
|---|
| 96 | VBoxEfiFirmware_INST = $(INST_BIN)
|
|---|
| 97 | VBoxEfiFirmware_MODE = 0644
|
|---|
| 98 | VBoxEfiFirmware_SOURCES = \
|
|---|
| 99 | $(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd=>VBoxEFI32.fd \
|
|---|
| 100 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd=>VBoxEFI64.fd
|
|---|
| 101 | VBoxEfiFirmware_BLDDIRS = \
|
|---|
| 102 | $(VBoxEfiFirmware_0_OUTDIR)/x86/ \
|
|---|
| 103 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/ \
|
|---|
| 104 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/ \
|
|---|
| 105 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/
|
|---|
| 106 | VBoxEfiFirmware_CLEAN = \
|
|---|
| 107 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt \
|
|---|
| 108 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
|
|---|
| 109 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt \
|
|---|
| 110 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt
|
|---|
| 111 |
|
|---|
| 112 | # Install the debug info.
|
|---|
| 113 | INSTALLS += VBoxEfiFirmwareDbg32
|
|---|
| 114 | VBoxEfiFirmwareDbg32_INST = $(INST_VBOXDBG_SYMS)x86/
|
|---|
| 115 | VBoxEfiFirmwareDbg32_MODE = 0644
|
|---|
| 116 | if1of ($(KBUILD_HOST), win)
|
|---|
| 117 | VBoxEfiFirmwareDbg32_SOURCES = \
|
|---|
| 118 | $(foreach mod,$(VBOX_EFI_MODULES),$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/IA32/$(mod).pdb)
|
|---|
| 119 | else
|
|---|
| 120 | VBoxEfiFirmwareDbg32_SOURCES = \
|
|---|
| 121 | $(foreach mod,$(VBOX_EFI_MODULES_FLAT),$(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/IA32/$(mod).debug)
|
|---|
| 122 | endif
|
|---|
| 123 |
|
|---|
| 124 | INSTALLS += VBoxEfiFirmwareDbg64
|
|---|
| 125 | VBoxEfiFirmwareDbg64_INST = $(INST_VBOXDBG_SYMS)amd64/
|
|---|
| 126 | VBoxEfiFirmwareDbg64_MODE = 0644
|
|---|
| 127 | if1of ($(KBUILD_HOST), win)
|
|---|
| 128 | VBoxEfiFirmwareDbg64_SOURCES = \
|
|---|
| 129 | $(foreach mod,$(VBOX_EFI_MODULES),$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/X64/$(mod).pdb)
|
|---|
| 130 | else
|
|---|
| 131 | VBoxEfiFirmwareDbg64_SOURCES = \
|
|---|
| 132 | $(foreach mod,$(VBOX_EFI_MODULES_FLAT),$(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/X64/$(mod).debug)
|
|---|
| 133 | endif
|
|---|
| 134 |
|
|---|
| 135 |
|
|---|
| 136 | #
|
|---|
| 137 | # Install a custom clean up rule for dealing with the EFI build system output.
|
|---|
| 138 | #
|
|---|
| 139 | PASS_CLEAN_trgs += VBoxEfiFirmwareCleanup
|
|---|
| 140 | VBoxEfiFirmwareCleanup:
|
|---|
| 141 | $(if $(VBoxEfiFirmware_0_OUTDIR),,exit 1)
|
|---|
| 142 | $(RM) -Rf -- "$(VBoxEfiFirmware_0_OUTDIR)/amd64/" "$(VBoxEfiFirmware_0_OUTDIR)/x86/"
|
|---|
| 143 | .PHONY: VBoxEfiFirmwareCleanup
|
|---|
| 144 |
|
|---|
| 145 |
|
|---|
| 146 | #
|
|---|
| 147 | # The reset vector code.
|
|---|
| 148 | #
|
|---|
| 149 |
|
|---|
| 150 | # Dummy Linker.
|
|---|
| 151 | TOOL_VBoxEfiResetVectorLd = Dummy linker for the EFI reset vectors.
|
|---|
| 152 | TOOL_VBoxEfiResetVectorLd_LINK_MISCBIN_OUTPUT =
|
|---|
| 153 | TOOL_VBoxEfiResetVectorLd_LINK_MISCBIN_DEPEND =
|
|---|
| 154 | TOOL_VBoxEfiResetVectorLd_LINK_MISCBIN_DEPORD =
|
|---|
| 155 | define TOOL_VBoxEfiResetVectorLd_LINK_MISCBIN_CMDS
|
|---|
| 156 | $(VBOX_BLD_PYTHON) $(VBOX_PATH_EFI_FIRMWARE)/UefiCpuPkg/ResetVector/Vtf0/Tools/FixupForRawSection.py \
|
|---|
| 157 | "$(objs)" \
|
|---|
| 158 | "$(out)"
|
|---|
| 159 | endef
|
|---|
| 160 |
|
|---|
| 161 | # Makes a boot sector test image.
|
|---|
| 162 | TEMPLATE_VBoxEfiResetVectorRaw = kBuild tool config for building the EFI reset vectors.
|
|---|
| 163 | TEMPLATE_VBoxEfiResetVectorRaw_INSTTYPE = none
|
|---|
| 164 | TEMPLATE_VBoxEfiResetVectorRaw_BINSUFF = .raw
|
|---|
| 165 | TEMPLATE_VBoxEfiResetVectorRaw_MODE = 0644
|
|---|
| 166 | TEMPLATE_VBoxEfiResetVectorRaw_ASTOOL = YASM
|
|---|
| 167 | TEMPLATE_VBoxEfiResetVectorRaw_ASFLAGS:= -f bin $(VBOX_YASM_Wno-segreg-in-64bit) --mapfile
|
|---|
| 168 | TEMPLATE_VBoxEfiResetVectorRaw_ASDEFS = ASM_FORMAT_BIN __YASM__
|
|---|
| 169 | TEMPLATE_VBoxEfiResetVectorRaw_INCS = UefiCpuPkg/ResetVector/Vtf0
|
|---|
| 170 | TEMPLATE_VBoxEfiResetVectorRaw_LDTOOL = VBoxEfiResetVectorLd
|
|---|
| 171 |
|
|---|
| 172 | MISCBINS += VBoxEfiResetVector-x86
|
|---|
| 173 | VBoxEfiResetVector-x86_TEMPLATE = VBoxEfiResetVectorRaw
|
|---|
| 174 | VBoxEfiResetVector-x86_DEFS = ARCH_IA32 RT_ARCH_X86 DEBUG_NONE
|
|---|
| 175 | VBoxEfiResetVector-x86_SOURCES = OvmfPkg/ResetVector/ResetVectorCode.asm
|
|---|
| 176 |
|
|---|
| 177 | MISCBINS += VBoxEfiResetVector-amd64
|
|---|
| 178 | VBoxEfiResetVector-amd64_TEMPLATE = VBoxEfiResetVectorRaw
|
|---|
| 179 | VBoxEfiResetVector-amd64_DEFS = ARCH_X64 RT_ARCH_AMD64 DEBUG_NONE
|
|---|
| 180 | VBoxEfiResetVector-amd64_SOURCES = OvmfPkg/ResetVector/ResetVectorCode.asm
|
|---|
| 181 |
|
|---|
| 182 |
|
|---|
| 183 | #
|
|---|
| 184 | # Include the footer early so that we can use VBoxEfiFirmware_0_OUTDIR below.
|
|---|
| 185 | #
|
|---|
| 186 | include $(FILE_KBUILD_SUB_FOOTER)
|
|---|
| 187 |
|
|---|
| 188 | #
|
|---|
| 189 | # Incomplete list of dependencies relative.
|
|---|
| 190 | #
|
|---|
| 191 | VBOX_EFI_DEPENDENCIES = \
|
|---|
| 192 | $(VBOX_PATH_EFI_FIRMWARE)/../DevEFI.h \
|
|---|
| 193 | $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxDebugAgentLib/VBoxDebugAgentLib.c \
|
|---|
| 194 | $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxDebugAgentLib/VBoxDebugAgentLib.inf \
|
|---|
| 195 | $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxPeCoffExtraActionLib/VBoxPeCoffExtraActionLib.c \
|
|---|
| 196 | $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/Library/VBoxPeCoffExtraActionLib/VBoxPeCoffExtraActionLib.inf \
|
|---|
| 197 | $(VBOX_PATH_EFI_FIRMWARE)/VBoxPkg/VBoxPkg.dec \
|
|---|
| 198 | \
|
|---|
| 199 | $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkg.dec \
|
|---|
| 200 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c \
|
|---|
| 201 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConnect.c \
|
|---|
| 202 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsConsole.c \
|
|---|
| 203 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/BdsMisc.c \
|
|---|
| 204 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/DevicePath.c \
|
|---|
| 205 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsLib.inf \
|
|---|
| 206 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/GenericBdsStrings.uni \
|
|---|
| 207 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/InternalBdsLib.h \
|
|---|
| 208 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/Performance.c \
|
|---|
| 209 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/String.c \
|
|---|
| 210 | $(VBOX_PATH_EFI_FIRMWARE)/IntelFrameworkModulePkg/Library/GenericBdsLib/String.h \
|
|---|
| 211 |
|
|---|
| 212 | #
|
|---|
| 213 | # The common build.py invocation part.
|
|---|
| 214 | #
|
|---|
| 215 | if1of ($(KBUILD_HOST), win)
|
|---|
| 216 | VBOX_EFI_REDIRECT_E_EQUAL:=$(EQUAL)
|
|---|
| 217 | VBOX_EFI_BUILD_CMD = $(REDIRECT) \
|
|---|
| 218 | -E 'PATH=$(VBOX_PATH_STAGE_EFI_BLDPROGS)$(VBOX_SEP)$(PATH)' \
|
|---|
| 219 | -E 'INCLUDE=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(VBOX_SEP)$(PATH_TOOL_$(VBOX_VCC_TOOL)_INC)$(INCLUDE)' \
|
|---|
| 220 | -E 'COMSPEC=$(windir)\system32\cmd.exe'
|
|---|
| 221 | else
|
|---|
| 222 | VBOX_EFI_REDIRECT_E_EQUAL:=
|
|---|
| 223 | VBOX_EFI_BUILD_CMD = $(REDIRECT) \
|
|---|
| 224 | -E "PATH=$(VBOX_PATH_STAGE_EFI_BLDPROGS)$(VBOX_SEP)$(PATH)" \
|
|---|
| 225 | -E "C_INCLUDE_PATH=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(C_INCLUDE_PATH)" \
|
|---|
| 226 | -E "CPLUS_INCLUDE_PATH=$(PATH_ROOT)/include$(VBOX_SEP)$(PATH_OUT)$(VBOX_SEP)$(C_INCLUDE_PATH)"
|
|---|
| 227 | endif
|
|---|
| 228 | VBOX_EFI_BUILD_CMD += \
|
|---|
| 229 | -E 'PYTHONPATH=$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python' \
|
|---|
| 230 | -E 'PYTHONDONTWRITEBYTECODE=1' \
|
|---|
| 231 | -E 'IASL_BIN=$(VBOX_IASLCMD)' \
|
|---|
| 232 | -E 'NASM_BIN=$(VBOX_YASMCMD)' \
|
|---|
| 233 | -E 'WORKSPACE=$(VBOX_PATH_EFI_FIRMWARE)' \
|
|---|
| 234 | -E 'EDK_TOOLS_PATH=$(VBOX_PATH_EFI_FIRMWARE)/BaseTools' \
|
|---|
| 235 | -E 'EFI_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
|
|---|
| 236 | -E 'ECP_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
|
|---|
| 237 | -E 'EDK_SOURCE$(VBOX_EFI_REDIRECT_E_EQUAL)' \
|
|---|
| 238 | -E 'X64_PETOOLS_PREFIX$(VBOX_EFI_REDIRECT_E_EQUAL)' \
|
|---|
| 239 | -E 'ARCH$(VBOX_EFI_REDIRECT_E_EQUAL)' \
|
|---|
| 240 | -E 'IPF_PETOOLS_PREFIX=__no_ipf__' \
|
|---|
| 241 | -E $(if-expr "$(EFI_QUIET)" != "" || "$(KBUILD_VERBOSE)" != "",'EFI_QUIET=','EFI_QUIET=@') \
|
|---|
| 242 | -C '$(VBOX_PATH_EFI_FIRMWARE)' \
|
|---|
| 243 | -- $(VBOX_BLD_PYTHON) "$(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Source/Python/build/build.py" \
|
|---|
| 244 | -D VBOX_WITH_EDK2_REV=13361 \
|
|---|
| 245 | -D VBOX=1 \
|
|---|
| 246 | -D VBOX_WITH_OVMF=1 \
|
|---|
| 247 | -D BUILD_NEW_SHELL=1 \
|
|---|
| 248 | -D VBOX_REV=$(VBOX_SVN_REV) \
|
|---|
| 249 | -D "VBOX_OUTPUT_BASE_DIR=$(VBoxEfiFirmware_0_OUTDIR)" \
|
|---|
| 250 | -D "VBOX_PATH_ROOT=$(PATH_ROOT)" \
|
|---|
| 251 | -D "VBOX_RESET_VECTOR_X86=$(VBoxEfiResetVector-x86_1_TARGET)" \
|
|---|
| 252 | -D "VBOX_RESET_VECTOR_AMD64=$(VBoxEfiResetVector-amd64_1_TARGET)" \
|
|---|
| 253 | $(if $(VBOX_OSE),-D "VBOX_OSE=1") \
|
|---|
| 254 | --silent \
|
|---|
| 255 | $(if $(KBUILD_VERBOSE),,--quiet) \
|
|---|
| 256 | --no-cache \
|
|---|
| 257 | --buildtarget $(VBOX_EFI_BUILD_TARGET) \
|
|---|
| 258 | --tagname $(VBOX_EFI_TOOL_CHAIN)
|
|---|
| 259 |
|
|---|
| 260 | #
|
|---|
| 261 | # Tools configurations.
|
|---|
| 262 | #
|
|---|
| 263 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
|
|---|
| 264 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt: \
|
|---|
| 265 | $(VBOX_PATH_EFI_FIRMWARE)/vbox-tools_def.txt \
|
|---|
| 266 | $(MAKEFILE) | $$(dir $$@)
|
|---|
| 267 | $(RM) -f -- "$@"
|
|---|
| 268 | $(SED) \
|
|---|
| 269 | -e 's,@VBOX_IASLCMD@,$(VBOX_IASLCMD),' \
|
|---|
| 270 | -e 's,@VBOX_YASMCMD@,$(VBOX_YASMCMD),' \
|
|---|
| 271 | -e 's,@KMK@,$(MAKE),' \
|
|---|
| 272 | \
|
|---|
| 273 | -e 's,@VBOX_PATH_PREFIX_MINGW32@,$(VBOX_PATH_PREFIX_MINGW32),' \
|
|---|
| 274 | -e 's,@VBOX_PATH_PREFIX_MINGW64@,$(VBOX_PATH_PREFIX_MINGW64),' \
|
|---|
| 275 | -e 's,@VBOX_MINGW32_Wno@,-Wno-address $(VBOX_MINGW32_Wno-unused-but-set-variable) $(VBOX_MINGW32_Wno-maybe-uninitialized) $(VBOX_MINGW32_Wno-array-bounds),' \
|
|---|
| 276 | -e 's,@VBOX_MINGW64_Wno@,-Wno-address $(VBOX_MINGW64_Wno-unused-but-set-variable) $(VBOX_MINGW64_Wno-maybe-uninitialized) $(VBOX_MINGW64_Wno-array-bounds),' \
|
|---|
| 277 | -e 's,@VBOX_MINGW64_USER_LABEL_PREFIX@,$(VBOX_MINGW64_USER_LABEL_PREFIX),' \
|
|---|
| 278 | \
|
|---|
| 279 | -e 's,@PATH_VS2010@,$(PATH_TOOL_$(VBOX_VCC_TOOL)),' \
|
|---|
| 280 | -e 's,@PATH_VS2010_AMD64_BIN@,$(PATH_TOOL_$(VBOX_VCC_TOOL))/bin/$(subst x86,x86_amd64,$(KBUILD_HOST_ARCH)),' \
|
|---|
| 281 | \
|
|---|
| 282 | --output $@ $<
|
|---|
| 283 |
|
|---|
| 284 | #
|
|---|
| 285 | # VBoxEFI32
|
|---|
| 286 | #
|
|---|
| 287 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt: $(MAKEFILE) | $$(dir $$@) $(VBOX_EFI_BLDPROGS)
|
|---|
| 288 | $(APPEND) -tn "$@" \
|
|---|
| 289 | "# Automatically generated, do not edit" \
|
|---|
| 290 | "" \
|
|---|
| 291 | "# These variables cannot be overriden by the build.py command line." \
|
|---|
| 292 | "TOOL_CHAIN_CONF = $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt" \
|
|---|
| 293 | "BUILD_RULE_CONF = $(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Conf/build_rule.template" \
|
|---|
| 294 | "" \
|
|---|
| 295 | "# These variables are overridden and this is just for show." \
|
|---|
| 296 | "ACTIVE_PLATFORM = OvmfPkg/OvmfPkgIa32.dsc" \
|
|---|
| 297 | "TARGET = $(VBOX_EFI_BUILD_TARGET)" \
|
|---|
| 298 | "TARGET_ARCH = IA32" \
|
|---|
| 299 | "TOOL_CHAIN_TAG = $(VBOX_EFI_TOOL_CHAIN)" \
|
|---|
| 300 | "MAX_CONCURRENT_THREAD_NUMBER = 1"
|
|---|
| 301 |
|
|---|
| 302 | $(VBoxEfiFirmware_0_OUTDIR)/x86/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd \
|
|---|
| 303 | + $(VBoxEfiFirmwareDbg32_SOURCES): \
|
|---|
| 304 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt \
|
|---|
| 305 | $(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/tools_def.txt \
|
|---|
| 306 | $$(VBoxEfiResetVector-x86_1_TARGET) \
|
|---|
| 307 | $(VBOX_EFI_DEPENDENCIES) \
|
|---|
| 308 | $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgIa32.dsc \
|
|---|
| 309 | $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgIa32.fdf
|
|---|
| 310 | + $(VBOX_EFI_BUILD_CMD) \
|
|---|
| 311 | --vbox-target-conf "$(VBoxEfiFirmware_0_OUTDIR)/x86/Conf/target.txt" \
|
|---|
| 312 | --arch IA32 \
|
|---|
| 313 | --platform OvmfPkg/OvmfPkgIa32.dsc \
|
|---|
| 314 | -n 1 # -v
|
|---|
| 315 |
|
|---|
| 316 | #
|
|---|
| 317 | # VBoxEFI64
|
|---|
| 318 | #
|
|---|
| 319 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt: $(MAKEFILE) | $$(dir $$@) $(VBOX_EFI_BLDPROGS)
|
|---|
| 320 | $(APPEND) -tn "$@" \
|
|---|
| 321 | "# Automatically generated, do not edit" \
|
|---|
| 322 | "" \
|
|---|
| 323 | "# These variables cannot be overriden by the build.py command line." \
|
|---|
| 324 | "TOOL_CHAIN_CONF = $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt" \
|
|---|
| 325 | "BUILD_RULE_CONF = $(VBOX_PATH_EFI_FIRMWARE)/BaseTools/Conf/build_rule.template" \
|
|---|
| 326 | "" \
|
|---|
| 327 | "# These variables are overridden and this is just for show." \
|
|---|
| 328 | "ACTIVE_PLATFORM = OvmfPkg/OvmfPkgX64.dsc" \
|
|---|
| 329 | "TARGET = $(VBOX_EFI_BUILD_TARGET)" \
|
|---|
| 330 | "TARGET_ARCH = X64" \
|
|---|
| 331 | "TOOL_CHAIN_TAG = $(VBOX_EFI_TOOL_CHAIN)" \
|
|---|
| 332 | "MAX_CONCURRENT_THREAD_NUMBER = 1"
|
|---|
| 333 |
|
|---|
| 334 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/$(VBOX_EFI_OUTPUT_SUBDIR)/FV/OVMF.fd \
|
|---|
| 335 | + $(VBoxEfiFirmwareDbg64_SOURCES): \
|
|---|
| 336 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt \
|
|---|
| 337 | $(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/tools_def.txt \
|
|---|
| 338 | $$(VBoxEfiResetVector-amd64_1_TARGET) \
|
|---|
| 339 | $(VBOX_EFI_DEPENDENCIES) \
|
|---|
| 340 | $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgX64.dsc \
|
|---|
| 341 | $(VBOX_PATH_EFI_FIRMWARE)/OvmfPkg/OvmfPkgX64.fdf
|
|---|
| 342 | + $(VBOX_EFI_BUILD_CMD) \
|
|---|
| 343 | --vbox-target-conf "$(VBoxEfiFirmware_0_OUTDIR)/amd64/Conf/target.txt" \
|
|---|
| 344 | --arch X64 \
|
|---|
| 345 | --platform OvmfPkg/OvmfPkgX64.dsc \
|
|---|
| 346 | -n 1 # -v
|
|---|
| 347 |
|
|---|
| 348 | #
|
|---|
| 349 | # Some aliases.
|
|---|
| 350 | #
|
|---|
| 351 | build-efi-x86: $$(filter %VBoxEFI32.fd,$$(VBoxEfiFirmware_2_STAGE_TARGETS))
|
|---|
| 352 | build-efi-amd64: $$(filter %VBoxEFI64.fd,$$(VBoxEfiFirmware_2_STAGE_TARGETS))
|
|---|
| 353 |
|
|---|
