DevFlash.cpp@ 77662

Last change on this file since 77662 was 76553, checked in by vboxsync, 6 years ago
scm --update-copyright-year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 20.5 KB

Line
1	/* $Id: DevFlash.cpp 76553 2019-01-01 01:45:53Z vboxsync $ */
2	/** @file
3	* DevFlash - A simple Flash device
4	*
5	* A simple non-volatile byte-wide (x8) memory device modeled after Intel 28F008
6	* FlashFile. See 28F008SA datasheet, Intel order number 290429-007.
7	*
8	* Implemented as an MMIO device attached directly to the CPU, not behind any
9	* bus. Typically mapped as part of the firmware image.
10	*/
11
12	/*
13	* Copyright (C) 2018-2019 Oracle Corporation
14	*
15	* This file is part of VirtualBox Open Source Edition (OSE), as
16	* available from http://www.virtualbox.org. This file is free software;
17	* you can redistribute it and/or modify it under the terms of the GNU
18	* General Public License (GPL) as published by the Free Software
19	* Foundation, in version 2 as it comes in the "COPYING" file of the
20	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
21	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
22	*/
23
24
25	/*********************************************************************************************************************************
26	* Header Files *
27	*********************************************************************************************************************************/
28	#define LOG_GROUP LOG_GROUP_DEV_FLASH
29	#include <VBox/vmm/pdmdev.h>
30	#include <VBox/log.h>
31	#include <VBox/err.h>
32	#include <iprt/assert.h>
33	#include <iprt/string.h>
34	#include <iprt/file.h>
35
36	#include "VBoxDD.h"
37
38
39	/*********************************************************************************************************************************
40	* Defined Constants And Macros *
41	*********************************************************************************************************************************/
42	/** The current version of the saved state. */
43	#define FLASH_SAVED_STATE_VERSION 1
44
45
46	/** @name CUI (Command User Interface) Commands.
47	* @{ */
48	#define FLASH_CMD_ALT_WRITE 0x10
49	#define FLASH_CMD_ERASE_SETUP 0x20
50	#define FLASH_CMD_WRITE 0x40
51	#define FLASH_CMD_STS_CLEAR 0x50
52	#define FLASH_CMD_STS_READ 0x70
53	#define FLASH_CMD_READ_ID 0x90
54	#define FLASH_CMD_ERASE_SUS_RES 0xB0
55	#define FLASH_CMD_ERASE_CONFIRM 0xD0
56	#define FLASH_CMD_ARRAY_READ 0xFF
57	/** @} */
58
59	/** @name Status register bits.
60	* @{ */
61	#define FLASH_STATUS_WSMS 0x80 /* Write State Machine Status, 1=Ready */
62	#define FLASH_STATUS_ESS 0x40 /* Erase Suspend Status, 1=Suspended */
63	#define FLASH_STATUS_ES 0x20 /* Erase Status, 1=Error */
64	#define FLASH_STATUS_BWS 0x10 /* Byte Write Status, 1=Error */
65	#define FLASH_STATUS_VPPS 0x08 /* Vpp Status, 1=Low Vpp */
66	/* The remaining bits 0-2 are reserved/unused */
67	/** @} */
68
69
70	/*********************************************************************************************************************************
71	* Structures and Typedefs *
72	*********************************************************************************************************************************/
73
74
75	/**
76	* The flash device
77	*/
78	typedef struct DEVFLASH
79	{
80	/** The current command. */
81	uint8_t bCmd;
82	/** The status register. */
83	uint8_t bStatus;
84	/** Current bus cycle. */
85	uint8_t cBusCycle;
86
87	uint8_t uPadding0;
88
89	/* The following state does not change at runtime.*/
90	/** Manufacturer (high byte) and device (low byte) ID. */
91	uint16_t u16FlashId;
92	/** The configured block size of the device. */
93	uint16_t cbBlockSize;
94	/** The guest physical memory base address. */
95	RTGCPHYS GCPhysFlashBase;
96	/** The flash memory region size. */
97	uint32_t cbFlashSize;
98	/** The actual flash memory data. */
99	uint8_t *pbFlash;
100	/** When set, indicates the state was saved. */
101	bool fStateSaved;
102	/** The backing file. */
103	RTFILE hFlashFile;
104	char *pszFlashFile;
105	} DEVFLASH;
106
107	/** Pointer to the Flash device state. */
108	typedef DEVFLASH *PDEVFLASH;
109
110	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
111
112
113	/*********************************************************************************************************************************
114	* Internal Functions *
115	*********************************************************************************************************************************/
116
117
118	/*********************************************************************************************************************************
119	* Global Variables *
120	*********************************************************************************************************************************/
121
122	#ifdef IN_RING3 /* for now */
123
124	static int flashMemWriteByte(PDEVFLASH pThis, RTGCPHYS GCPhysAddr, uint8_t bCmd)
125	{
126	int rc = VINF_SUCCESS;
127	unsigned uOffset;
128
129	/* NB: Older datasheets (e.g. 28F008SA) suggest that for two-cycle commands like byte write or
130	* erase setup, the address is significant in both cycles, but do not explain what happens
131	* should the addresses not match. Newer datasheets (e.g. 28F008B3) clearly say that the address
132	* in the first byte cycle never matters. We prefer the latter interpretation.
133	*/
134
135	if (pThis->cBusCycle == 0)
136	{
137	/* First bus write cycle, start processing a new command. Address is ignored. */
138	switch (bCmd)
139	{
140	case FLASH_CMD_ARRAY_READ:
141	case FLASH_CMD_STS_READ:
142	case FLASH_CMD_ERASE_SUS_RES:
143	case FLASH_CMD_READ_ID:
144	/* Single-cycle write commands, only change the current command. */
145	pThis->bCmd = bCmd;
146	break;
147	case FLASH_CMD_STS_CLEAR:
148	/* Status clear continues in read mode. */
149	pThis->bStatus = 0;
150	pThis->bCmd = FLASH_CMD_ARRAY_READ;
151	break;
152	case FLASH_CMD_WRITE:
153	case FLASH_CMD_ALT_WRITE:
154	case FLASH_CMD_ERASE_SETUP:
155	/* Two-cycle commands, advance the bus write cycle. */
156	pThis->bCmd = bCmd;
157	pThis->cBusCycle++;
158	break;
159	default:
160	LogFunc(("1st cycle command %02X, current cmd %02X\n", bCmd, pThis->bCmd));
161	break;
162	}
163	}
164	else
165	{
166	/* Second write of a two-cycle command. */
167	Assert(pThis->cBusCycle == 1);
168	switch (pThis->bCmd)
169	{
170	case FLASH_CMD_WRITE:
171	case FLASH_CMD_ALT_WRITE:
172	uOffset = GCPhysAddr & (pThis->cbFlashSize - 1);
173	if (uOffset < pThis->cbFlashSize)
174	{
175	pThis->pbFlash[uOffset] = bCmd;
176	/* NB: Writes are instant and never fail. */
177	LogFunc(("wrote byte to flash at %08RGp: %02X\n", GCPhysAddr, bCmd));
178	}
179	else
180	LogFunc(("ignoring write at %08RGp: %02X\n", GCPhysAddr, bCmd));
181	break;
182	case FLASH_CMD_ERASE_SETUP:
183	if (bCmd == FLASH_CMD_ERASE_CONFIRM)
184	{
185	/* The current address determines the block to erase. */
186	uOffset = GCPhysAddr & (pThis->cbFlashSize - 1);
187	uOffset = uOffset & ~(pThis->cbBlockSize - 1);
188	memset(pThis->pbFlash + uOffset, 0xff, pThis->cbBlockSize);
189	LogFunc(("Erasing block at offset %u\n", uOffset));
190	}
191	else
192	{
193	/* Anything else is a command erorr. Transition to status read mode. */
194	LogFunc(("2st cycle erase command is %02X, should be confirm (%02X)\n", bCmd, FLASH_CMD_ERASE_CONFIRM));
195	pThis->bCmd = FLASH_CMD_STS_READ;
196	pThis->bStatus \|= FLASH_STATUS_BWS \| FLASH_STATUS_ES;
197	}
198	break;
199	default:
200	LogFunc(("2st cycle bad command %02X, current cmd %02X\n", bCmd, pThis->bCmd));
201	break;
202	}
203	pThis->cBusCycle = 0;
204	}
205	LogFlow(("flashMemWriteByte: write access at %08RGp: %#x rc=%Rrc\n", GCPhysAddr, bCmd, rc));
206	//LogRel(("flashMemWriteByte: write access at %08RGp: %#x (cmd=%02X) rc=%Rrc\n", GCPhysAddr, bCmd, pThis->bCmd, rc));
207	return rc;
208	}
209
210
211	static int flashMemReadByte(PDEVFLASH pThis, RTGCPHYS GCPhysAddr, uint8_t *pbData)
212	{
213	uint8_t bValue;
214	unsigned uOffset;
215	int rc = VINF_SUCCESS;
216
217	/* Reads are only defined in three states: Array read, status register read,
218	* and ID read.
219	*/
220	switch (pThis->bCmd)
221	{
222	case FLASH_CMD_ARRAY_READ:
223	uOffset = GCPhysAddr & (pThis->cbFlashSize - 1);
224	bValue = pThis->pbFlash[uOffset];
225	LogFunc(("read byte at %08RGp: %02X\n", GCPhysAddr, bValue));
226	break;
227	case FLASH_CMD_STS_READ:
228	bValue = pThis->bStatus;
229	break;
230	case FLASH_CMD_READ_ID:
231	bValue = GCPhysAddr & 1 ? RT_HI_U8(pThis->u16FlashId) : RT_LO_U8(pThis->u16FlashId);
232	break;
233	default:
234	bValue = 0xff;
235	break;
236	}
237	*pbData = bValue;
238
239	LogFlow(("flashMemReadByte: read access at %08RGp: %02X (cmd=%02X) rc=%Rrc\n", GCPhysAddr, bValue, pThis->bCmd, rc));
240	//LogRel(("flashMemReadByte: read access at %08RGp: %02X (cmd=%02X) rc=%Rrc\n", GCPhysAddr, bValue, pThis->bCmd, rc));
241	return rc;
242	}
243
244	/** @callback_method_impl{FNIOMMIWRITE, Flash memory write} */
245	PDMBOTHCBDECL(int) flashMMIOWrite(PPDMDEVINS pDevIns, void pvUser, RTGCPHYS GCPhysAddr, void const pv, unsigned cb)
246	{
247	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
248	int rc = VINF_SUCCESS;
249	const uint8_t pu8Mem = (const uint8_t )pv;
250	unsigned uOffset;
251	RT_NOREF1(pvUser);
252
253	/* Writes may need to go back to R3. If more than one byte is being written (not likely!),
254	* just suck it up and take the trip to R3 immediately.
255	*/
256	/** @todo Idea: We could buffer all writes in R0 and flush them out on a
257	* timer. Probably not worth it.
258	*/
259	#ifndef IN_RING3
260	if (cb > 1)
261	return VINF_IOM_R3_IOPORT_WRITE;
262	#endif
263
264	for (uOffset = 0; uOffset < cb; ++uOffset)
265	{
266	rc = flashMemWriteByte(pThis, GCPhysAddr + uOffset, pu8Mem[uOffset]);
267	if (!RT_SUCCESS(rc))
268	break;
269	}
270
271	LogFlow(("FlashMMIOWrite: completed write at %08RGp (LB %u): rc=%Rrc\n", GCPhysAddr, cb, rc));
272	return rc;
273	}
274
275
276	/** @callback_method_impl{FNIOMMIOREAD, Flash memory read} */
277	PDMBOTHCBDECL(int) flashMMIORead(PPDMDEVINS pDevIns, void pvUser, RTGCPHYS GCPhysAddr, void pv, unsigned cb)
278	{
279	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
280	int rc = VINF_SUCCESS;
281	unsigned uOffset;
282	uint8_t *pu8Mem;
283	RT_NOREF1(pvUser);
284
285	/* Reading can always be done witout going back to R3. Reads do not
286	* change the device state and we always have the data.
287	*/
288	pu8Mem = (uint8_t *)pv;
289	for (uOffset = 0; uOffset < cb; ++uOffset, ++pu8Mem)
290	{
291	rc = flashMemReadByte(pThis, GCPhysAddr + uOffset, pu8Mem);
292	if (!RT_SUCCESS(rc))
293	break;
294	}
295
296	LogFlow(("flashMMIORead: completed read at %08RGp (LB %u): rc=%Rrc\n", GCPhysAddr, cb, rc));
297	return rc;
298	}
299
300	#endif /* IN_RING3 for now */
301
302	#ifdef IN_RING3
303
304	/** @callback_method_impl{FNSSMDEVSAVEEXEC} */
305	static DECLCALLBACK(int) flashSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
306	{
307	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
308
309	/* Save the device state. */
310	SSMR3PutU8(pSSM, pThis->bCmd);
311	SSMR3PutU8(pSSM, pThis->bStatus);
312	SSMR3PutU8(pSSM, pThis->cBusCycle);
313
314	/* Save the current configuration for validation purposes. */
315	SSMR3PutU16(pSSM, pThis->cbBlockSize);
316	SSMR3PutU16(pSSM, pThis->u16FlashId);
317
318	/* Save the current flash contents. */
319	SSMR3PutU32(pSSM, pThis->cbFlashSize);
320	SSMR3PutMem(pSSM, pThis->pbFlash, pThis->cbFlashSize);
321
322	pThis->fStateSaved = true;
323
324	return VINF_SUCCESS;
325	}
326
327
328	/** @callback_method_impl{FNSSMDEVLOADEXEC} */
329	static DECLCALLBACK(int) flashLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass)
330	{
331	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
332	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
333
334	/* Fend off unsupported versions. */
335	if (uVersion != FLASH_SAVED_STATE_VERSION)
336	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
337
338	/*
339	* Do the actual restoring.
340	*/
341	if (uVersion == FLASH_SAVED_STATE_VERSION)
342	{
343	uint16_t u16Val;
344	uint32_t u32Val;
345
346	SSMR3GetU8(pSSM, &pThis->bCmd);
347	SSMR3GetU8(pSSM, &pThis->bStatus);
348	SSMR3GetU8(pSSM, &pThis->cBusCycle);
349
350	/* Make sure configuration didn't change behind our back. */
351	SSMR3GetU16(pSSM, &u16Val);
352	if (u16Val != pThis->cbBlockSize)
353	return VERR_SSM_LOAD_CONFIG_MISMATCH;
354	SSMR3GetU16(pSSM, &u16Val);
355	if (u16Val != pThis->u16FlashId)
356	return VERR_SSM_LOAD_CONFIG_MISMATCH;
357	SSMR3GetU32(pSSM, &u32Val);
358	if (u16Val != pThis->cbFlashSize)
359	return VERR_SSM_LOAD_CONFIG_MISMATCH;
360
361	/* Suck in the flash contents. */
362	SSMR3GetMem(pSSM, pThis->pbFlash, pThis->cbFlashSize);
363	}
364
365	return VINF_SUCCESS;
366	}
367
368	/**
369	* @interface_method_impl{PDMDEVREG,pfnReset}
370	*/
371	static DECLCALLBACK(void) flashReset(PPDMDEVINS pDevIns)
372	{
373	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
374
375	/*
376	* Initialize the device state.
377	*/
378	pThis->bCmd = FLASH_CMD_ARRAY_READ;
379	pThis->bStatus = 0;
380	pThis->cBusCycle = 0;
381	}
382
383	/**
384	* @interface_method_impl{PDMDEVREG,pfnDestruct}
385	*/
386	static DECLCALLBACK(int) flashDestruct(PPDMDEVINS pDevIns)
387	{
388	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
389	int rc;
390
391	if (!pThis->fStateSaved)
392	{
393	rc = RTFileSeek(pThis->hFlashFile, 0, RTFILE_SEEK_BEGIN, NULL);
394	rc = RTFileWrite(pThis->hFlashFile, pThis->pbFlash, pThis->cbFlashSize, NULL);
395	if (RT_FAILURE(rc))
396	LogRel(("flash: Failed to save flash file"));
397	}
398
399	if (pThis->pbFlash)
400	{
401	PDMDevHlpMMHeapFree(pDevIns, pThis->pbFlash);
402	pThis->pbFlash = NULL;
403	}
404
405	if (pThis->pszFlashFile)
406	{
407	PDMDevHlpMMHeapFree(pDevIns, pThis->pszFlashFile);
408	pThis->pszFlashFile = NULL;
409	}
410
411	return VINF_SUCCESS;
412	}
413
414	/** @todo this does not really belong here; workaround for EFI failing to init empty flash. */
415	static const uint8_t aHdrBegin[] = {
416	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
417	0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,
418	0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x46, 0x56, 0x48, 0xFF, 0xFE, 0x04, 0x00,
419	0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
420	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x36, 0xCF, 0xDD, 0x75, 0x32, 0x64, 0x41,
421	0x98, 0xB6, 0xFE, 0x85, 0x70, 0x7F, 0xFE, 0x7D, 0xB8, 0xDF, 0x00, 0x00, 0x5A, 0xFE, 0x00, 0x00,
422	0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
423	};
424
425	/**
426	* @interface_method_impl{PDMDEVREG,pfnConstruct}
427	*/
428	static DECLCALLBACK(int) flashConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
429	{
430	RT_NOREF1(iInstance);
431	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
432	PDEVFLASH pThis = PDMINS_2_DATA(pDevIns, PDEVFLASH);
433	Assert(iInstance == 0);
434
435	/*
436	* Validate configuration.
437	*/
438	PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "DeviceId\|BaseAddress\|Size\|BlockSize\|FlashFile", "");
439
440	/*
441	* Read configuration.
442	*/
443
444	/* The default device ID is Intel 28F800SA. */
445	int rc = CFGMR3QueryU16Def(pCfg, "DeviceId", &pThis->u16FlashId, 0xA289);
446	if (RT_FAILURE(rc))
447	return PDMDEV_SET_ERROR(pDevIns, rc,
448	N_("Configuration error: Querying \"DeviceId\" as an integer failed"));
449
450	/* The default base address is 2MB below 4GB. */
451	rc = CFGMR3QueryU64Def(pCfg, "BaseAddress", &pThis->GCPhysFlashBase, 0xFFE00000);
452	if (RT_FAILURE(rc))
453	return PDMDEV_SET_ERROR(pDevIns, rc,
454	N_("Configuration error: Querying \"BaseAddress\" as an integer failed"));
455
456	/* The default flash device size is 128K. */
457	rc = CFGMR3QueryU32Def(pCfg, "Size", &pThis->cbFlashSize, 128 * _1K);
458	if (RT_FAILURE(rc))
459	return PDMDEV_SET_ERROR(pDevIns, rc,
460	N_("Configuration error: Querying \"Size\" as an integer failed"));
461
462	/* The default flash device block size is 4K. */
463	rc = CFGMR3QueryU16Def(pCfg, "BlockSize", &pThis->cbBlockSize, 4 * _1K);
464	if (RT_FAILURE(rc))
465	return PDMDEV_SET_ERROR(pDevIns, rc,
466	N_("Configuration error: Querying \"BlockSize\" as an integer failed"));
467
468	/* The default flash device block size is 4K. */
469	rc = CFGMR3QueryU16Def(pCfg, "BlockSize", &pThis->cbBlockSize, 4 * _1K);
470	if (RT_FAILURE(rc))
471	return PDMDEV_SET_ERROR(pDevIns, rc,
472	N_("Configuration error: Querying \"BlockSize\" as an integer failed"));
473
474	rc = CFGMR3QueryStringAlloc(pCfg, "FlashFile", &pThis->pszFlashFile);
475	if (RT_FAILURE(rc))
476	return PDMDEV_SET_ERROR(pDevIns, rc,
477	N_("Configuration error: Querying \"FlashFile\" as a string failed"));
478
479	/* Try opening the backing file. */
480	rc = RTFileOpen(&pThis->hFlashFile, pThis->pszFlashFile, RTFILE_O_READWRITE \| RTFILE_O_OPEN_CREATE \| RTFILE_O_DENY_WRITE);
481	if (RT_FAILURE(rc))
482	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to open flash file"));
483
484	/* Set up the static state, immutable at run-time. */
485	pThis->pbFlash = (uint8_t *)PDMDevHlpMMHeapAlloc(pDevIns, pThis->cbFlashSize);
486	if (!pThis->pbFlash)
487	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to allocate heap memory"));
488
489	size_t cbRead = 0;
490	rc = RTFileRead(pThis->hFlashFile, pThis->pbFlash, pThis->cbFlashSize, &cbRead);
491	if (RT_FAILURE(rc))
492	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to read flash file"));
493	Log(("Read %zu bytes from file (asked for %u)\n.", cbRead, pThis->cbFlashSize));
494
495	/* If the file didn't exist, or someone truncated it, we'll initialize
496	* the storage with default contents.
497	*/
498	if (cbRead != pThis->cbFlashSize)
499	{
500	memset(pThis->pbFlash, 0xff, pThis->cbFlashSize);
501	memcpy(pThis->pbFlash, aHdrBegin, sizeof(aHdrBegin));
502	LogRel(("Only read %zu bytes from flash file (asked for %u). Initializing with defaults.\n", cbRead, pThis->cbFlashSize));
503	}
504
505	/* Reset the dynamic state.*/
506	flashReset(pDevIns);
507
508	/*
509	* Register MMIO region.
510	*/
511	rc = PDMDevHlpMMIORegister(pDevIns, pThis->GCPhysFlashBase, pThis->cbFlashSize, NULL /pvUser/,
512	IOMMMIO_FLAGS_READ_PASSTHRU \| IOMMMIO_FLAGS_WRITE_PASSTHRU,
513	flashMMIOWrite, flashMMIORead,
514	"Flash Memory");
515	AssertRCReturn(rc, rc);
516	LogRel(("Registered %uKB flash at %RGp\n", pThis->cbFlashSize / _1K, pThis->GCPhysFlashBase));
517
518	/*
519	* Register saved state.
520	*/
521	rc = PDMDevHlpSSMRegister(pDevIns, FLASH_SAVED_STATE_VERSION, sizeof(*pThis), flashSaveExec, flashLoadExec);
522	if (RT_FAILURE(rc))
523	return rc;
524
525	return VINF_SUCCESS;
526	}
527
528
529	/**
530	* The device registration structure.
531	*/
532	const PDMDEVREG g_DeviceFlash =
533	{
534	/* u32Version */
535	PDM_DEVREG_VERSION,
536	/* szName */
537	"flash",
538	/* szRCMod */
539	"VBoxDDRC.rc",
540	/* szR0Mod */
541	"VBoxDDR0.r0",
542	/* pszDescription */
543	"Flash Memory Device",
544	/* fFlags */
545	PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT \| PDM_DEVREG_FLAGS_GUEST_BITS_DEFAULT \| PDM_DEVREG_FLAGS_R0 \| PDM_DEVREG_FLAGS_RC,
546	/* fClass */
547	PDM_DEVREG_CLASS_ARCH,
548	/* cMaxInstances */
549	1,
550	/* cbInstance */
551	sizeof(DEVFLASH),
552	/* pfnConstruct */
553	flashConstruct,
554	/* pfnDestruct */
555	flashDestruct,
556	/* pfnRelocate */
557	NULL,
558	/* pfnMemSetup */
559	NULL,
560	/* pfnPowerOn */
561	NULL,
562	/* pfnReset */
563	flashReset,
564	/* pfnSuspend */
565	NULL,
566	/* pfnResume */
567	NULL,
568	/* pfnAttach */
569	NULL,
570	/* pfnDetach */
571	NULL,
572	/* pfnQueryInterface. */
573	NULL,
574	/* pfnInitComplete. */
575	NULL,
576	/* pfnPowerOff */
577	NULL,
578	/* pfnSoftReset */
579	NULL,
580	/* u32VersionEnd */
581	PDM_DEVREG_VERSION
582	};
583
584	#endif /* IN_RING3 */
585	#endif /* VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/EFI/DevFlash.cpp@ 77662

Download in other formats: