DBGConsole.cpp@ 31987

Last change on this file since 31987 was 31987, checked in by vboxsync, 14 years ago
PGM,DBGC,DBGF: Dump guest paging structures.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 66.6 KB

Line
1	/* $Id: DBGConsole.cpp 31987 2010-08-26 12:33:45Z vboxsync $ */
2	/** @file
3	* DBGC - Debugger Console.
4	*/
5
6	/*
7	* Copyright (C) 2006-2010 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	/** @page pg_dbgc DBGC - The Debug Console
20	*
21	* The debugger console is an early attempt to make some interactive
22	* debugging facilities for the VirtualBox VMM. It was initially only
23	* accessible thru a telnet session on debug builds. Later it was hastily
24	* built into the VBoxDbg module with a very simple Qt wrapper around it.
25	*
26	* The debugger is optional and presently not built into release builds
27	* of VirtualBox. It is therefore necessary to enclose code related to it
28	* in \#ifdef VBOX_WITH_DEBUGGER blocks. This is mandatory for components
29	* that register extenral commands.
30	*
31	*
32	* @section sec_dbgc_op Operation (intentions)
33	*
34	* The console will process commands in a manner similar to the OS/2 and
35	* windows kernel debuggers. This means ';' is a command separator and
36	* that when possible we'll use the same command names as these two uses.
37	*
38	*
39	* @subsection sec_dbg_op_numbers Numbers
40	*
41	* Numbers are hexadecimal unless specified with a prefix indicating
42	* elsewise. Prefixes:
43	* - '0x' - hexadecimal.
44	* - '0i' - decimal
45	* - '0t' - octal.
46	* - '0y' - binary.
47	*
48	* Some of the prefixes are a bit uncommon, the reason for this that
49	* the typical binary prefix '0b' can also be a hexadecimal value since
50	* no prefix or suffix is required for such values. Ditto for '0d' and
51	* '0' for decimal and octal.
52	*
53	*
54	* @subsection sec_dbg_op_address Addressing modes
55	*
56	* - Default is flat. For compatability '%' also means flat.
57	* - Segmented addresses are specified selector:offset.
58	* - Physical addresses are specified using '%%'.
59	* - The default target for the addressing is the guest context, the '#'
60	* will override this and set it to the host.
61	* Note that several operations won't work on host addresses.
62	*
63	* The '%', '%%' and '#' prefixes is implemented as unary operators, while ':'
64	* is a binary operator. Operator precedence takes care of evaluation order.
65	*
66	*
67	* @subsection sec_dbg_op_evalution Evaluation
68	*
69	* Most unary and binary C operators are supported, check the help text for
70	* details. However, some of these are not yet implemented because this is
71	* tiresome and annoying work. So, if something is missing and you need it
72	* you implement it or complain to bird. (Ditto for missing functions.)
73	*
74	* Simple variable support is provided thru the 'set' and 'unset' commands and
75	* the unary '$' operator.
76	*
77	* The unary '@' operator will indicate function calls. Commands and functions
78	* are the same thing, except that functions has a return type.
79	*
80	*
81	* @subsection sec_dbg_op_registers Registers
82	*
83	* Registers are addressed using their name. Some registers which have several fields
84	* (like gdtr) will have separate names indicating the different fields. The default
85	* register set is the guest one. To access the hypervisor register one have to
86	* prefix the register names with '.'.
87	*
88	* The registers are implemented as built-in symbols. For making gdb guys more at
89	* home it is possible to access them with the '$' operator, i.e. as a variable.
90	*
91	*
92	* @subsection sec_dbg_op_commands Commands and Functions
93	*
94	* Commands and functions are the same thing, except that functions may return a
95	* value. So, functions may be used as commands. The command/function handlers
96	* can detect whether they are invoked as a command or function by checking whether
97	* there is a return variable or not.
98	*
99	* The command/function names are all lowercase, case sensitive, and starting
100	* with a letter. Operator characters are not permitted in the names of course.
101	* Space is allowed, but must be flagged so the parser can check for multiple
102	* spaces and tabs. (This feature is for 'dump xyz' and for emulating the
103	* gdb 'info abc'.)
104	*
105	* The '.' prefix indicates the set of external commands. External commands are
106	* command registered by VMM components.
107	*
108	*
109	* @section sec_dbgc_logging Logging
110	*
111	* The idea is to be able to pass thru debug and release logs to the console
112	* if the user so wishes. This feature requires some kind of hook into the
113	* logger instance and while this was sketched it hasn't yet been implemented
114	* (dbgcProcessLog and DBGC::fLog).
115	*
116	*
117	*
118	* @section sec_dbgc_linking Linking and API
119	*
120	* The DBGC code is linked into the VBoxVMM module. (At present it is also
121	* linked into VBoxDbg, but this is obviously very wrong.)
122	*
123	* A COM object will be created for the DBGC so it can be operated remotely
124	* without using TCP. VBoxDbg is the intended audience for this usage. Some
125	* questions about callbacks (for output) and security (you may wish to
126	* restrict users from debugging a VM) needs to be answered first though.
127	*/
128
129
130	/*******************************************************************************
131	* Header Files *
132	*******************************************************************************/
133	#define LOG_GROUP LOG_GROUP_DBGC
134	#include <VBox/dbg.h>
135	#include <VBox/dbgf.h>
136	#include <VBox/vm.h>
137	#include <VBox/vmm.h>
138	#include <VBox/mm.h>
139	#include <VBox/pgm.h>
140	#include <VBox/selm.h>
141	#include <VBox/dis.h>
142	#include <VBox/param.h>
143	#include <VBox/err.h>
144	#include <VBox/log.h>
145
146	#include <iprt/asm.h>
147	#include <iprt/alloca.h>
148	#include <iprt/assert.h>
149	#include <iprt/mem.h>
150	#include <iprt/string.h>
151	#include <iprt/ctype.h>
152
153	#include <stdlib.h>
154	#include <stdio.h>
155
156	#include "DBGCInternal.h"
157	#include "DBGPlugIns.h"
158
159
160	/*******************************************************************************
161	* Global Variables *
162	*******************************************************************************/
163	/** Bitmap where set bits indicates the characters the may start an operator name. */
164	static uint32_t g_bmOperatorChars[256 / (4*8)];
165
166
167	/*******************************************************************************
168	* Internal Functions *
169	*******************************************************************************/
170	static int dbgcProcessLog(PDBGC pDbgc);
171
172
173
174	/**
175	* Initalizes g_bmOperatorChars.
176	*/
177	static void dbgcInitOpCharBitMap(void)
178	{
179	memset(g_bmOperatorChars, 0, sizeof(g_bmOperatorChars));
180	for (unsigned iOp = 0; iOp < g_cOps; iOp++)
181	ASMBitSet(&g_bmOperatorChars[0], (uint8_t)g_aOps[iOp].szName[0]);
182	}
183
184
185	/**
186	* Checks whether the character may be the start of an operator.
187	*
188	* @returns true/false.
189	* @param ch The character.
190	*/
191	DECLINLINE(bool) dbgcIsOpChar(char ch)
192	{
193	return ASMBitTest(&g_bmOperatorChars[0], (uint8_t)ch);
194	}
195
196
197	/**
198	* Resolves a symbol (or tries to do so at least).
199	*
200	* @returns 0 on success.
201	* @returns VBox status on failure.
202	* @param pDbgc The debug console instance.
203	* @param pszSymbol The symbol name.
204	* @param enmType The result type.
205	* @param pResult Where to store the result.
206	*/
207	int dbgcSymbolGet(PDBGC pDbgc, const char *pszSymbol, DBGCVARTYPE enmType, PDBGCVAR pResult)
208	{
209	/*
210	* Builtin?
211	*/
212	PCDBGCSYM pSymDesc = dbgcLookupRegisterSymbol(pDbgc, pszSymbol);
213	if (pSymDesc)
214	{
215	if (!pSymDesc->pfnGet)
216	return VERR_PARSE_WRITEONLY_SYMBOL;
217	return pSymDesc->pfnGet(pSymDesc, &pDbgc->CmdHlp, enmType, pResult);
218	}
219
220
221	/*
222	* Ask PDM.
223	*/
224	/** @todo resolve symbols using PDM. */
225
226
227	/*
228	* Ask the debug info manager.
229	*/
230	RTDBGSYMBOL Symbol;
231	int rc = DBGFR3AsSymbolByName(pDbgc->pVM, pDbgc->hDbgAs, pszSymbol, &Symbol, NULL);
232	if (RT_SUCCESS(rc))
233	{
234	/*
235	* Default return is a flat gc address.
236	*/
237	memset(pResult, 0, sizeof(*pResult));
238	pResult->enmRangeType = Symbol.cb ? DBGCVAR_RANGE_BYTES : DBGCVAR_RANGE_NONE;
239	pResult->u64Range = Symbol.cb;
240	pResult->enmType = DBGCVAR_TYPE_GC_FLAT;
241	pResult->u.GCFlat = Symbol.Value;
242	DBGCVAR VarTmp;
243	switch (enmType)
244	{
245	/* nothing to do. */
246	case DBGCVAR_TYPE_GC_FLAT:
247	case DBGCVAR_TYPE_GC_FAR:
248	case DBGCVAR_TYPE_ANY:
249	return VINF_SUCCESS;
250
251	/* simply make it numeric. */
252	case DBGCVAR_TYPE_NUMBER:
253	pResult->enmType = DBGCVAR_TYPE_NUMBER;
254	pResult->u.u64Number = Symbol.Value;
255	return VINF_SUCCESS;
256
257	/* cast it. */
258
259	case DBGCVAR_TYPE_GC_PHYS:
260	VarTmp = *pResult;
261	return dbgcOpAddrPhys(pDbgc, &VarTmp, pResult);
262
263	case DBGCVAR_TYPE_HC_FAR:
264	case DBGCVAR_TYPE_HC_FLAT:
265	VarTmp = *pResult;
266	return dbgcOpAddrHost(pDbgc, &VarTmp, pResult);
267
268	case DBGCVAR_TYPE_HC_PHYS:
269	VarTmp = *pResult;
270	return dbgcOpAddrHostPhys(pDbgc, &VarTmp, pResult);
271
272	default:
273	AssertMsgFailed(("Internal error enmType=%d\n", enmType));
274	return VERR_INVALID_PARAMETER;
275	}
276	}
277
278	return VERR_PARSE_NOT_IMPLEMENTED;
279	}
280
281
282	static int dbgcEvalSubString(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pArg)
283	{
284	Log2(("dbgcEvalSubString: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr));
285
286	/*
287	* Removing any quoting and escapings.
288	*/
289	char ch = *pszExpr;
290	if (ch == '"' \|\| ch == '\'' \|\| ch == '`')
291	{
292	if (pszExpr[--cchExpr] != ch)
293	return VERR_PARSE_UNBALANCED_QUOTE;
294	cchExpr--;
295	pszExpr++;
296
297	/** @todo string unescaping. */
298	}
299	pszExpr[cchExpr] = '\0';
300
301	/*
302	* Make the argument.
303	*/
304	pArg->pDesc = NULL;
305	pArg->pNext = NULL;
306	pArg->enmType = DBGCVAR_TYPE_STRING;
307	pArg->u.pszString = pszExpr;
308	pArg->enmRangeType = DBGCVAR_RANGE_BYTES;
309	pArg->u64Range = cchExpr;
310
311	NOREF(pDbgc);
312	return 0;
313	}
314
315
316	static int dbgcEvalSubNum(char *pszExpr, unsigned uBase, PDBGCVAR pArg)
317	{
318	Log2(("dbgcEvalSubNum: uBase=%d pszExpr=%s\n", uBase, pszExpr));
319	/*
320	* Convert to number.
321	*/
322	uint64_t u64 = 0;
323	char ch;
324	while ((ch = *pszExpr) != '\0')
325	{
326	uint64_t u64Prev = u64;
327	unsigned u = ch - '0';
328	if (u < 10 && u < uBase)
329	u64 = u64 * uBase + u;
330	else if (ch >= 'a' && (u = ch - ('a' - 10)) < uBase)
331	u64 = u64 * uBase + u;
332	else if (ch >= 'A' && (u = ch - ('A' - 10)) < uBase)
333	u64 = u64 * uBase + u;
334	else
335	return VERR_PARSE_INVALID_NUMBER;
336
337	/* check for overflow - ARG!!! How to detect overflow correctly!?!?!? */
338	if (u64Prev != u64 / uBase)
339	return VERR_PARSE_NUMBER_TOO_BIG;
340
341	/* next */
342	pszExpr++;
343	}
344
345	/*
346	* Initialize the argument.
347	*/
348	pArg->pDesc = NULL;
349	pArg->pNext = NULL;
350	pArg->enmType = DBGCVAR_TYPE_NUMBER;
351	pArg->u.u64Number = u64;
352	pArg->enmRangeType = DBGCVAR_RANGE_NONE;
353	pArg->u64Range = 0;
354
355	return 0;
356	}
357
358
359	/**
360	* Match variable and variable descriptor, promoting the variable if necessary.
361	*
362	* @returns VBox status code.
363	* @param pDbgc Debug console instanace.
364	* @param pVar Variable.
365	* @param pVarDesc Variable descriptor.
366	*/
367	static int dbgcEvalSubMatchVar(PDBGC pDbgc, PDBGCVAR pVar, PCDBGCVARDESC pVarDesc)
368	{
369	/*
370	* (If match or promoted to match, return, else break.)
371	*/
372	switch (pVarDesc->enmCategory)
373	{
374	/*
375	* Anything goes
376	*/
377	case DBGCVAR_CAT_ANY:
378	return VINF_SUCCESS;
379
380	/*
381	* Pointer with and without range.
382	* We can try resolve strings and symbols as symbols and
383	* promote numbers to flat GC pointers.
384	*/
385	case DBGCVAR_CAT_POINTER_NO_RANGE:
386	if (pVar->enmRangeType != DBGCVAR_RANGE_NONE)
387	return VERR_PARSE_NO_RANGE_ALLOWED;
388	/* fallthru */
389	case DBGCVAR_CAT_POINTER:
390	switch (pVar->enmType)
391	{
392	case DBGCVAR_TYPE_GC_FLAT:
393	case DBGCVAR_TYPE_GC_FAR:
394	case DBGCVAR_TYPE_GC_PHYS:
395	case DBGCVAR_TYPE_HC_FLAT:
396	case DBGCVAR_TYPE_HC_FAR:
397	case DBGCVAR_TYPE_HC_PHYS:
398	return VINF_SUCCESS;
399
400	case DBGCVAR_TYPE_SYMBOL:
401	case DBGCVAR_TYPE_STRING:
402	{
403	DBGCVAR Var;
404	int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_GC_FLAT, &Var);
405	if (RT_SUCCESS(rc))
406	{
407	/* deal with range */
408	if (pVar->enmRangeType != DBGCVAR_RANGE_NONE)
409	{
410	Var.enmRangeType = pVar->enmRangeType;
411	Var.u64Range = pVar->u64Range;
412	}
413	else if (pVarDesc->enmCategory == DBGCVAR_CAT_POINTER_NO_RANGE)
414	Var.enmRangeType = DBGCVAR_RANGE_NONE;
415	*pVar = Var;
416	return rc;
417	}
418	break;
419	}
420
421	case DBGCVAR_TYPE_NUMBER:
422	{
423	RTGCPTR GCPtr = (RTGCPTR)pVar->u.u64Number;
424	pVar->enmType = DBGCVAR_TYPE_GC_FLAT;
425	pVar->u.GCFlat = GCPtr;
426	return VINF_SUCCESS;
427	}
428
429	default:
430	break;
431	}
432	break;
433
434	/*
435	* GC pointer with and without range.
436	* We can try resolve strings and symbols as symbols and
437	* promote numbers to flat GC pointers.
438	*/
439	case DBGCVAR_CAT_GC_POINTER_NO_RANGE:
440	if (pVar->enmRangeType != DBGCVAR_RANGE_NONE)
441	return VERR_PARSE_NO_RANGE_ALLOWED;
442	/* fallthru */
443	case DBGCVAR_CAT_GC_POINTER:
444	switch (pVar->enmType)
445	{
446	case DBGCVAR_TYPE_GC_FLAT:
447	case DBGCVAR_TYPE_GC_FAR:
448	case DBGCVAR_TYPE_GC_PHYS:
449	return VINF_SUCCESS;
450
451	case DBGCVAR_TYPE_HC_FLAT:
452	case DBGCVAR_TYPE_HC_FAR:
453	case DBGCVAR_TYPE_HC_PHYS:
454	return VERR_PARSE_CONVERSION_FAILED;
455
456	case DBGCVAR_TYPE_SYMBOL:
457	case DBGCVAR_TYPE_STRING:
458	{
459	DBGCVAR Var;
460	int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_GC_FLAT, &Var);
461	if (RT_SUCCESS(rc))
462	{
463	/* deal with range */
464	if (pVar->enmRangeType != DBGCVAR_RANGE_NONE)
465	{
466	Var.enmRangeType = pVar->enmRangeType;
467	Var.u64Range = pVar->u64Range;
468	}
469	else if (pVarDesc->enmCategory == DBGCVAR_CAT_POINTER_NO_RANGE)
470	Var.enmRangeType = DBGCVAR_RANGE_NONE;
471	*pVar = Var;
472	return rc;
473	}
474	break;
475	}
476
477	case DBGCVAR_TYPE_NUMBER:
478	{
479	RTGCPTR GCPtr = (RTGCPTR)pVar->u.u64Number;
480	pVar->enmType = DBGCVAR_TYPE_GC_FLAT;
481	pVar->u.GCFlat = GCPtr;
482	return VINF_SUCCESS;
483	}
484
485	default:
486	break;
487	}
488	break;
489
490	/*
491	* Number with or without a range.
492	* Numbers can be resolved from symbols, but we cannot demote a pointer
493	* to a number.
494	*/
495	case DBGCVAR_CAT_NUMBER_NO_RANGE:
496	if (pVar->enmRangeType != DBGCVAR_RANGE_NONE)
497	return VERR_PARSE_NO_RANGE_ALLOWED;
498	/* fallthru */
499	case DBGCVAR_CAT_NUMBER:
500	switch (pVar->enmType)
501	{
502	case DBGCVAR_TYPE_NUMBER:
503	return VINF_SUCCESS;
504
505	case DBGCVAR_TYPE_SYMBOL:
506	case DBGCVAR_TYPE_STRING:
507	{
508	DBGCVAR Var;
509	int rc = dbgcSymbolGet(pDbgc, pVar->u.pszString, DBGCVAR_TYPE_NUMBER, &Var);
510	if (RT_SUCCESS(rc))
511	{
512	*pVar = Var;
513	return rc;
514	}
515	break;
516	}
517	default:
518	break;
519	}
520	break;
521
522	/*
523	* Strings can easily be made from symbols (and of course strings).
524	* We could consider reformatting the addresses and numbers into strings later...
525	*/
526	case DBGCVAR_CAT_STRING:
527	switch (pVar->enmType)
528	{
529	case DBGCVAR_TYPE_SYMBOL:
530	pVar->enmType = DBGCVAR_TYPE_STRING;
531	/* fallthru */
532	case DBGCVAR_TYPE_STRING:
533	return VINF_SUCCESS;
534	default:
535	break;
536	}
537	break;
538
539	/*
540	* Symol is pretty much the same thing as a string (at least until we actually implement it).
541	*/
542	case DBGCVAR_CAT_SYMBOL:
543	switch (pVar->enmType)
544	{
545	case DBGCVAR_TYPE_STRING:
546	pVar->enmType = DBGCVAR_TYPE_SYMBOL;
547	/* fallthru */
548	case DBGCVAR_TYPE_SYMBOL:
549	return VINF_SUCCESS;
550	default:
551	break;
552	}
553	break;
554
555	/*
556	* Anything else is illegal.
557	*/
558	default:
559	AssertMsgFailed(("enmCategory=%d\n", pVar->enmType));
560	break;
561	}
562
563	return VERR_PARSE_NO_ARGUMENT_MATCH;
564	}
565
566
567	/**
568	* Matches a set of variables with a description set.
569	*
570	* This is typically used for routine arguments before a call. The effects in
571	* addition to the validation, is that some variables might be propagated to
572	* other types in order to match the description. The following transformations
573	* are supported:
574	* - String reinterpreted as a symbol and resolved to a number or pointer.
575	* - Number to a pointer.
576	* - Pointer to a number.
577	* @returns 0 on success with paVars.
578	* @returns VBox error code for match errors.
579	*/
580	static int dbgcEvalSubMatchVars(PDBGC pDbgc, unsigned cVarsMin, unsigned cVarsMax,
581	PCDBGCVARDESC paVarDescs, unsigned cVarDescs,
582	PDBGCVAR paVars, unsigned cVars)
583	{
584	/*
585	* Just do basic min / max checks first.
586	*/
587	if (cVars < cVarsMin)
588	return VERR_PARSE_TOO_FEW_ARGUMENTS;
589	if (cVars > cVarsMax)
590	return VERR_PARSE_TOO_MANY_ARGUMENTS;
591
592	/*
593	* Match the descriptors and actual variables.
594	*/
595	PCDBGCVARDESC pPrevDesc = NULL;
596	unsigned cCurDesc = 0;
597	unsigned iVar = 0;
598	unsigned iVarDesc = 0;
599	while (iVar < cVars)
600	{
601	/* walk the descriptors */
602	if (iVarDesc >= cVarDescs)
603	return VERR_PARSE_TOO_MANY_ARGUMENTS;
604	if ( ( paVarDescs[iVarDesc].fFlags & DBGCVD_FLAGS_DEP_PREV
605	&& &paVarDescs[iVarDesc - 1] != pPrevDesc)
606	\|\| cCurDesc >= paVarDescs[iVarDesc].cTimesMax)
607	{
608	iVarDesc++;
609	if (iVarDesc >= cVarDescs)
610	return VERR_PARSE_TOO_MANY_ARGUMENTS;
611	cCurDesc = 0;
612	}
613
614	/*
615	* Skip thru optional arguments until we find something which matches
616	* or can easily be promoted to what the descriptor want.
617	*/
618	for (;;)
619	{
620	int rc = dbgcEvalSubMatchVar(pDbgc, &paVars[iVar], &paVarDescs[iVarDesc]);
621	if (RT_SUCCESS(rc))
622	{
623	paVars[iVar].pDesc = &paVarDescs[iVarDesc];
624	cCurDesc++;
625	break;
626	}
627
628	/* can we advance? */
629	if (paVarDescs[iVarDesc].cTimesMin > cCurDesc)
630	return VERR_PARSE_ARGUMENT_TYPE_MISMATCH;
631	if (++iVarDesc >= cVarDescs)
632	return VERR_PARSE_ARGUMENT_TYPE_MISMATCH;
633	cCurDesc = 0;
634	}
635
636	/* next var */
637	iVar++;
638	}
639
640	/*
641	* Check that the rest of the descriptors are optional.
642	*/
643	while (iVarDesc < cVarDescs)
644	{
645	if (paVarDescs[iVarDesc].cTimesMin > cCurDesc)
646	return VERR_PARSE_TOO_FEW_ARGUMENTS;
647	cCurDesc = 0;
648
649	/* next */
650	iVarDesc++;
651	}
652
653	return 0;
654	}
655
656
657	/**
658	* Evaluates one argument with respect to unary operators.
659	*
660	* @returns 0 on success. pResult contains the result.
661	* @returns VBox error code on parse or other evaluation error.
662	*
663	* @param pDbgc Debugger console instance data.
664	* @param pszExpr The expression string.
665	* @param pResult Where to store the result of the expression evaluation.
666	*/
667	static int dbgcEvalSubUnary(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pResult)
668	{
669	Log2(("dbgcEvalSubUnary: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr));
670
671	/*
672	* The state of the expression is now such that it will start by zero or more
673	* unary operators and being followed by an expression of some kind.
674	* The expression is either plain or in parenthesis.
675	*
676	* Being in a lazy, recursive mode today, the parsing is done as simple as possible. :-)
677	* ASSUME: unary operators are all of equal precedence.
678	*/
679	int rc = 0;
680	PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, pszExpr, false, ' ');
681	if (pOp)
682	{
683	/* binary operators means syntax error. */
684	if (pOp->fBinary)
685	return VERR_PARSE_UNEXPECTED_OPERATOR;
686
687	/*
688	* If the next expression (the one following the unary operator) is in a
689	* parenthesis a full eval is needed. If not the unary eval will suffice.
690	*/
691	/* calc and strip next expr. */
692	char *pszExpr2 = pszExpr + pOp->cchName;
693	while (RT_C_IS_BLANK(*pszExpr2))
694	pszExpr2++;
695
696	if (!*pszExpr2)
697	rc = VERR_PARSE_EMPTY_ARGUMENT;
698	else
699	{
700	DBGCVAR Arg;
701	if (*pszExpr2 == '(')
702	rc = dbgcEvalSub(pDbgc, pszExpr2, cchExpr - (pszExpr2 - pszExpr), &Arg);
703	else
704	rc = dbgcEvalSubUnary(pDbgc, pszExpr2, cchExpr - (pszExpr2 - pszExpr), &Arg);
705	if (RT_SUCCESS(rc))
706	rc = pOp->pfnHandlerUnary(pDbgc, &Arg, pResult);
707	}
708	}
709	else
710	{
711	/*
712	* Didn't find any operators, so it we have to check if this can be an
713	* function call before assuming numeric or string expression.
714	*
715	* (ASSUMPTIONS:)
716	* A function name only contains alphanumerical chars and it can not start
717	* with a numerical character.
718	* Immediately following the name is a parenthesis which must over
719	* the remaining part of the expression.
720	*/
721	bool fExternal = *pszExpr == '.';
722	char *pszFun = fExternal ? pszExpr + 1 : pszExpr;
723	char *pszFunEnd = NULL;
724	if (pszExpr[cchExpr - 1] == ')' && RT_C_IS_ALPHA(*pszFun))
725	{
726	pszFunEnd = pszExpr + 1;
727	while (pszFunEnd != '(' && RT_C_IS_ALNUM(pszFunEnd))
728	pszFunEnd++;
729	if (*pszFunEnd != '(')
730	pszFunEnd = NULL;
731	}
732
733	if (pszFunEnd)
734	{
735	/*
736	* Ok, it's a function call.
737	*/
738	if (fExternal)
739	pszExpr++, cchExpr--;
740	PCDBGCCMD pFun = dbgcRoutineLookup(pDbgc, pszExpr, pszFunEnd - pszExpr, fExternal);
741	if (!pFun)
742	return VERR_PARSE_FUNCTION_NOT_FOUND;
743	if (!pFun->pResultDesc)
744	return VERR_PARSE_NOT_A_FUNCTION;
745
746	/*
747	* Parse the expression in parenthesis.
748	*/
749	cchExpr -= pszFunEnd - pszExpr;
750	pszExpr = pszFunEnd;
751	/** @todo implement multiple arguments. */
752	DBGCVAR Arg;
753	rc = dbgcEvalSub(pDbgc, pszExpr, cchExpr, &Arg);
754	if (!rc)
755	{
756	rc = dbgcEvalSubMatchVars(pDbgc, pFun->cArgsMin, pFun->cArgsMax, pFun->paArgDescs, pFun->cArgDescs, &Arg, 1);
757	if (!rc)
758	rc = pFun->pfnHandler(pFun, &pDbgc->CmdHlp, pDbgc->pVM, &Arg, 1, pResult);
759	}
760	else if (rc == VERR_PARSE_EMPTY_ARGUMENT && pFun->cArgsMin == 0)
761	rc = pFun->pfnHandler(pFun, &pDbgc->CmdHlp, pDbgc->pVM, NULL, 0, pResult);
762	}
763	else
764	{
765	/*
766	* Didn't find any operators, so it must be a plain expression.
767	* This might be numeric or a string expression.
768	*/
769	char ch = pszExpr[0];
770	char ch2 = pszExpr[1];
771	if (ch == '0' && (ch2 == 'x' \|\| ch2 == 'X'))
772	rc = dbgcEvalSubNum(pszExpr + 2, 16, pResult);
773	else if (ch == '0' && (ch2 == 'i' \|\| ch2 == 'i'))
774	rc = dbgcEvalSubNum(pszExpr + 2, 10, pResult);
775	else if (ch == '0' && (ch2 == 't' \|\| ch2 == 'T'))
776	rc = dbgcEvalSubNum(pszExpr + 2, 8, pResult);
777	/// @todo 0b doesn't work as a binary prefix, we confuse it with 0bf8:0123 and stuff.
778	//else if (ch == '0' && (ch2 == 'b' \|\| ch2 == 'b'))
779	// rc = dbgcEvalSubNum(pszExpr + 2, 2, pResult);
780	else
781	{
782	/*
783	* Hexadecimal number or a string?
784	*/
785	char *psz = pszExpr;
786	while (RT_C_IS_XDIGIT(*psz))
787	psz++;
788	if (!*psz)
789	rc = dbgcEvalSubNum(pszExpr, 16, pResult);
790	else if ((psz == 'h' \|\| psz == 'H') && !psz[1])
791	{
792	*psz = '\0';
793	rc = dbgcEvalSubNum(pszExpr, 16, pResult);
794	}
795	else
796	rc = dbgcEvalSubString(pDbgc, pszExpr, cchExpr, pResult);
797	}
798	}
799	}
800
801	return rc;
802	}
803
804
805	/**
806	* Evaluates one argument.
807	*
808	* @returns 0 on success. pResult contains the result.
809	* @returns VBox error code on parse or other evaluation error.
810	*
811	* @param pDbgc Debugger console instance data.
812	* @param pszExpr The expression string.
813	* @param pResult Where to store the result of the expression evaluation.
814	*/
815	int dbgcEvalSub(PDBGC pDbgc, char *pszExpr, size_t cchExpr, PDBGCVAR pResult)
816	{
817	Log2(("dbgcEvalSub: cchExpr=%d pszExpr=%s\n", cchExpr, pszExpr));
818	/*
819	* First we need to remove blanks in both ends.
820	* ASSUMES: There is no quoting unless the entire expression is a string.
821	*/
822
823	/* stripping. */
824	while (cchExpr > 0 && RT_C_IS_BLANK(pszExpr[cchExpr - 1]))
825	pszExpr[--cchExpr] = '\0';
826	while (RT_C_IS_BLANK(*pszExpr))
827	pszExpr++, cchExpr--;
828	if (!*pszExpr)
829	return VERR_PARSE_EMPTY_ARGUMENT;
830
831	/* it there is any kind of quoting in the expression, it's string meat. */
832	if (strpbrk(pszExpr, "\"'`"))
833	return dbgcEvalSubString(pDbgc, pszExpr, cchExpr, pResult);
834
835	/*
836	* Check if there are any parenthesis which needs removing.
837	*/
838	if (pszExpr[0] == '(' && pszExpr[cchExpr - 1] == ')')
839	{
840	do
841	{
842	unsigned cPar = 1;
843	char *psz = pszExpr + 1;
844	char ch;
845	while ((ch = *psz) != '\0')
846	{
847	if (ch == '(')
848	cPar++;
849	else if (ch == ')')
850	{
851	if (cPar <= 0)
852	return VERR_PARSE_UNBALANCED_PARENTHESIS;
853	cPar--;
854	if (cPar == 0 && psz[1]) /* If not at end, there's nothing to do. */
855	break;
856	}
857	/* next */
858	psz++;
859	}
860	if (ch)
861	break;
862
863	/* remove the parenthesis. */
864	pszExpr++;
865	cchExpr -= 2;
866	pszExpr[cchExpr] = '\0';
867
868	/* strip blanks. */
869	while (cchExpr > 0 && RT_C_IS_BLANK(pszExpr[cchExpr - 1]))
870	pszExpr[--cchExpr] = '\0';
871	while (RT_C_IS_BLANK(*pszExpr))
872	pszExpr++, cchExpr--;
873	if (!*pszExpr)
874	return VERR_PARSE_EMPTY_ARGUMENT;
875	} while (pszExpr[0] == '(' && pszExpr[cchExpr - 1] == ')');
876	}
877
878	/* tabs to spaces. */
879	char *psz = pszExpr;
880	while ((psz = strchr(psz, '\t')) != NULL)
881	*psz = ' ';
882
883	/*
884	* Now, we need to look for the binary operator with the lowest precedence.
885	*
886	* If there are no operators we're left with a simple expression which we
887	* evaluate with respect to unary operators
888	*/
889	char *pszOpSplit = NULL;
890	PCDBGCOP pOpSplit = NULL;
891	unsigned cBinaryOps = 0;
892	unsigned cPar = 0;
893	char ch;
894	char chPrev = ' ';
895	bool fBinary = false;
896	psz = pszExpr;
897
898	while ((ch = *psz) != '\0')
899	{
900	//Log2(("ch=%c cPar=%d fBinary=%d\n", ch, cPar, fBinary));
901	/*
902	* Parenthesis.
903	*/
904	if (ch == '(')
905	{
906	cPar++;
907	fBinary = false;
908	}
909	else if (ch == ')')
910	{
911	if (cPar <= 0)
912	return VERR_PARSE_UNBALANCED_PARENTHESIS;
913	cPar--;
914	fBinary = true;
915	}
916	/*
917	* Potential operator.
918	*/
919	else if (cPar == 0 && !RT_C_IS_BLANK(ch))
920	{
921	PCDBGCOP pOp = dbgcIsOpChar(ch)
922	? dbgcOperatorLookup(pDbgc, psz, fBinary, chPrev)
923	: NULL;
924	if (pOp)
925	{
926	/* If not the right kind of operator we've got a syntax error. */
927	if (pOp->fBinary != fBinary)
928	return VERR_PARSE_UNEXPECTED_OPERATOR;
929
930	/*
931	* Update the parse state and skip the operator.
932	*/
933	if (!pOpSplit)
934	{
935	pOpSplit = pOp;
936	pszOpSplit = psz;
937	cBinaryOps = fBinary;
938	}
939	else if (fBinary)
940	{
941	cBinaryOps++;
942	if (pOp->iPrecedence >= pOpSplit->iPrecedence)
943	{
944	pOpSplit = pOp;
945	pszOpSplit = psz;
946	}
947	}
948
949	psz += pOp->cchName - 1;
950	fBinary = false;
951	}
952	else
953	fBinary = true;
954	}
955
956	/* next */
957	psz++;
958	chPrev = ch;
959	} /* parse loop. */
960
961
962	/*
963	* Either we found an operator to divide the expression by
964	* or we didn't find any. In the first case it's divide and
965	* conquer. In the latter it's a single expression which
966	* needs dealing with its unary operators if any.
967	*/
968	int rc;
969	if ( cBinaryOps
970	&& pOpSplit->fBinary)
971	{
972	/* process 1st sub expression. */
973	*pszOpSplit = '\0';
974	DBGCVAR Arg1;
975	rc = dbgcEvalSub(pDbgc, pszExpr, pszOpSplit - pszExpr, &Arg1);
976	if (RT_SUCCESS(rc))
977	{
978	/* process 2nd sub expression. */
979	char *psz2 = pszOpSplit + pOpSplit->cchName;
980	DBGCVAR Arg2;
981	rc = dbgcEvalSub(pDbgc, psz2, cchExpr - (psz2 - pszExpr), &Arg2);
982	if (RT_SUCCESS(rc))
983	/* apply the operator. */
984	rc = pOpSplit->pfnHandlerBinary(pDbgc, &Arg1, &Arg2, pResult);
985	}
986	}
987	else if (cBinaryOps)
988	{
989	/* process sub expression. */
990	pszOpSplit += pOpSplit->cchName;
991	DBGCVAR Arg;
992	rc = dbgcEvalSub(pDbgc, pszOpSplit, cchExpr - (pszOpSplit - pszExpr), &Arg);
993	if (RT_SUCCESS(rc))
994	/* apply the operator. */
995	rc = pOpSplit->pfnHandlerUnary(pDbgc, &Arg, pResult);
996	}
997	else
998	/* plain expression or using unary operators perhaps with paratheses. */
999	rc = dbgcEvalSubUnary(pDbgc, pszExpr, cchExpr, pResult);
1000
1001	return rc;
1002	}
1003
1004
1005	/**
1006	* Parses the arguments of one command.
1007	*
1008	* @returns 0 on success.
1009	* @returns VBox error code on parse error with *pcArg containing the argument causing trouble.
1010	* @param pDbgc Debugger console instance data.
1011	* @param pCmd Pointer to the command descriptor.
1012	* @param pszArg Pointer to the arguments to parse.
1013	* @param paArgs Where to store the parsed arguments.
1014	* @param cArgs Size of the paArgs array.
1015	* @param pcArgs Where to store the number of arguments.
1016	* In the event of an error this is used to store the index of the offending argument.
1017	*/
1018	static int dbgcProcessArguments(PDBGC pDbgc, PCDBGCCMD pCmd, char pszArgs, PDBGCVAR paArgs, unsigned cArgs, unsigned pcArgs)
1019	{
1020	Log2(("dbgcProcessArguments: pCmd=%s pszArgs='%s'\n", pCmd->pszCmd, pszArgs));
1021	/*
1022	* Check if we have any argument and if the command takes any.
1023	*/
1024	*pcArgs = 0;
1025	/* strip leading blanks. */
1026	while (pszArgs && RT_C_IS_BLANK(pszArgs))
1027	pszArgs++;
1028	if (!*pszArgs)
1029	{
1030	if (!pCmd->cArgsMin)
1031	return 0;
1032	return VERR_PARSE_TOO_FEW_ARGUMENTS;
1033	}
1034	/** @todo fixme - foo() doesn't work. */
1035	if (!pCmd->cArgsMax)
1036	return VERR_PARSE_TOO_MANY_ARGUMENTS;
1037
1038	/*
1039	* This is a hack, it's "temporary" and should go away "when" the parser is
1040	* modified to match arguments while parsing.
1041	*/
1042	if ( pCmd->cArgsMax == 1
1043	&& pCmd->cArgsMin == 1
1044	&& pCmd->cArgDescs == 1
1045	&& pCmd->paArgDescs[0].enmCategory == DBGCVAR_CAT_STRING
1046	&& cArgs >= 1)
1047	{
1048	*pcArgs = 1;
1049	RTStrStripR(pszArgs);
1050	return dbgcEvalSubString(pDbgc, pszArgs, strlen(pszArgs), &paArgs[0]);
1051	}
1052
1053
1054	/*
1055	* The parse loop.
1056	*/
1057	PDBGCVAR pArg0 = &paArgs[0];
1058	PDBGCVAR pArg = pArg0;
1059	*pcArgs = 0;
1060	do
1061	{
1062	/*
1063	* Can we have another argument?
1064	*/
1065	if (*pcArgs >= pCmd->cArgsMax)
1066	return VERR_PARSE_TOO_MANY_ARGUMENTS;
1067	if (pArg >= &paArgs[cArgs])
1068	return VERR_PARSE_ARGUMENT_OVERFLOW;
1069
1070	/*
1071	* Find the end of the argument.
1072	*/
1073	int cPar = 0;
1074	char chQuote = '\0';
1075	char *pszEnd = NULL;
1076	char *psz = pszArgs;
1077	char ch;
1078	bool fBinary = false;
1079	for (;;)
1080	{
1081	/*
1082	* Check for the end.
1083	*/
1084	if ((ch = *psz) == '\0')
1085	{
1086	if (chQuote)
1087	return VERR_PARSE_UNBALANCED_QUOTE;
1088	if (cPar)
1089	return VERR_PARSE_UNBALANCED_PARENTHESIS;
1090	pszEnd = psz;
1091	break;
1092	}
1093	/*
1094	* When quoted we ignore everything but the quotation char.
1095	* We use the REXX way of escaping the quotation char, i.e. double occurence.
1096	*/
1097	else if (ch == '\'' \|\| ch == '"' \|\| ch == '`')
1098	{
1099	if (chQuote)
1100	{
1101	/* end quote? */
1102	if (ch == chQuote)
1103	{
1104	if (psz[1] == ch)
1105	psz++; /* skip the escaped quote char */
1106	else
1107	chQuote = '\0'; /* end of quoted string. */
1108	}
1109	}
1110	else
1111	chQuote = ch; /* open new quote */
1112	}
1113	/*
1114	* Parenthesis can of course be nested.
1115	*/
1116	else if (ch == '(')
1117	{
1118	cPar++;
1119	fBinary = false;
1120	}
1121	else if (ch == ')')
1122	{
1123	if (!cPar)
1124	return VERR_PARSE_UNBALANCED_PARENTHESIS;
1125	cPar--;
1126	fBinary = true;
1127	}
1128	else if (!chQuote && !cPar)
1129	{
1130	/*
1131	* Encountering blanks may mean the end of it all. A binary operator
1132	* will force continued parsing.
1133	*/
1134	if (RT_C_IS_BLANK(*psz))
1135	{
1136	pszEnd = psz++; /* just in case. */
1137	while (RT_C_IS_BLANK(*psz))
1138	psz++;
1139	PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, psz, fBinary, ' ');
1140	if (!pOp \|\| pOp->fBinary != fBinary)
1141	break; /* the end. */
1142	psz += pOp->cchName;
1143	while (RT_C_IS_BLANK(psz)) / skip blanks so we don't get here again */
1144	psz++;
1145	fBinary = false;
1146	continue;
1147	}
1148
1149	/*
1150	* Look for operators without a space up front.
1151	*/
1152	if (dbgcIsOpChar(*psz))
1153	{
1154	PCDBGCOP pOp = dbgcOperatorLookup(pDbgc, psz, fBinary, ' ');
1155	if (pOp)
1156	{
1157	if (pOp->fBinary != fBinary)
1158	{
1159	pszEnd = psz;
1160	/** @todo this is a parsing error really. */
1161	break; /* the end. */
1162	}
1163	psz += pOp->cchName;
1164	while (RT_C_IS_BLANK(psz)) / skip blanks so we don't get here again */
1165	psz++;
1166	fBinary = false;
1167	continue;
1168	}
1169	}
1170	fBinary = true;
1171	}
1172
1173	/* next char */
1174	psz++;
1175	}
1176	*pszEnd = '\0';
1177	/* (psz = next char to process) */
1178
1179	/*
1180	* Parse and evaluate the argument.
1181	*/
1182	int rc = dbgcEvalSub(pDbgc, pszArgs, strlen(pszArgs), pArg);
1183	if (RT_FAILURE(rc))
1184	return rc;
1185
1186	/*
1187	* Next.
1188	*/
1189	pArg++;
1190	(*pcArgs)++;
1191	pszArgs = psz;
1192	while (pszArgs && RT_C_IS_BLANK(pszArgs))
1193	pszArgs++;
1194	} while (*pszArgs);
1195
1196	/*
1197	* Match the arguments.
1198	*/
1199	return dbgcEvalSubMatchVars(pDbgc, pCmd->cArgsMin, pCmd->cArgsMax, pCmd->paArgDescs, pCmd->cArgDescs, pArg0, pArg - pArg0);
1200	}
1201
1202
1203	/**
1204	* Process one command.
1205	*
1206	* @returns VBox status code. Any error indicates the termination of the console session.
1207	* @param pDbgc Debugger console instance data.
1208	* @param pszCmd Pointer to the command.
1209	* @param cchCmd Length of the command.
1210	* @param fNoExecute Indicates that no commands should actually be executed.
1211	*/
1212	int dbgcProcessCommand(PDBGC pDbgc, char *pszCmd, size_t cchCmd, bool fNoExecute)
1213	{
1214	char *pszCmdInput = pszCmd;
1215
1216	/*
1217	* Skip blanks.
1218	*/
1219	while (RT_C_IS_BLANK(*pszCmd))
1220	pszCmd++, cchCmd--;
1221
1222	/* external command? */
1223	bool fExternal = *pszCmd == '.';
1224	if (fExternal)
1225	pszCmd++, cchCmd--;
1226
1227	/*
1228	* Find arguments.
1229	*/
1230	char *pszArgs = pszCmd;
1231	while (RT_C_IS_ALNUM(*pszArgs))
1232	pszArgs++;
1233	if (pszArgs && (!RT_C_IS_BLANK(pszArgs) \|\| pszArgs == pszCmd))
1234	{
1235	pDbgc->rcCmd = VINF_PARSE_INVALD_COMMAND_NAME;
1236	pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Syntax error in command '%s'!\n", pszCmdInput);
1237	return 0;
1238	}
1239
1240	/*
1241	* Find the command.
1242	*/
1243	PCDBGCCMD pCmd = dbgcRoutineLookup(pDbgc, pszCmd, pszArgs - pszCmd, fExternal);
1244	if (!pCmd \|\| (pCmd->fFlags & DBGCCMD_FLAGS_FUNCTION))
1245	{
1246	pDbgc->rcCmd = VINF_PARSE_COMMAND_NOT_FOUND;
1247	return pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Unknown command '%s'!\n", pszCmdInput);
1248	}
1249
1250	/*
1251	* Parse arguments (if any).
1252	*/
1253	unsigned cArgs;
1254	int rc = dbgcProcessArguments(pDbgc, pCmd, pszArgs, &pDbgc->aArgs[pDbgc->iArg], RT_ELEMENTS(pDbgc->aArgs) - pDbgc->iArg, &cArgs);
1255
1256	/*
1257	* Execute the command.
1258	*/
1259	if (!rc)
1260	{
1261	if (!fNoExecute)
1262	rc = pCmd->pfnHandler(pCmd, &pDbgc->CmdHlp, pDbgc->pVM, &pDbgc->aArgs[0], cArgs, NULL);
1263	pDbgc->rcCmd = rc;
1264	if (rc == VERR_DBGC_COMMAND_FAILED)
1265	rc = VINF_SUCCESS;
1266	}
1267	else
1268	{
1269	pDbgc->rcCmd = rc;
1270
1271	/* report parse / eval error. */
1272	switch (rc)
1273	{
1274	case VERR_PARSE_TOO_FEW_ARGUMENTS:
1275	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1276	"Syntax error: Too few arguments. Minimum is %d for command '%s'.\n", pCmd->cArgsMin, pCmd->pszCmd);
1277	break;
1278	case VERR_PARSE_TOO_MANY_ARGUMENTS:
1279	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1280	"Syntax error: Too many arguments. Maximum is %d for command '%s'.\n", pCmd->cArgsMax, pCmd->pszCmd);
1281	break;
1282	case VERR_PARSE_ARGUMENT_OVERFLOW:
1283	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1284	"Syntax error: Too many arguments.\n");
1285	break;
1286	case VERR_PARSE_UNBALANCED_QUOTE:
1287	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1288	"Syntax error: Unbalanced quote (argument %d).\n", cArgs);
1289	break;
1290	case VERR_PARSE_UNBALANCED_PARENTHESIS:
1291	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1292	"Syntax error: Unbalanced parenthesis (argument %d).\n", cArgs);
1293	break;
1294	case VERR_PARSE_EMPTY_ARGUMENT:
1295	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1296	"Syntax error: An argument or subargument contains nothing useful (argument %d).\n", cArgs);
1297	break;
1298	case VERR_PARSE_UNEXPECTED_OPERATOR:
1299	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1300	"Syntax error: Invalid operator usage (argument %d).\n", cArgs);
1301	break;
1302	case VERR_PARSE_INVALID_NUMBER:
1303	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1304	"Syntax error: Ivalid numeric value (argument %d). If a string was the intention, then quote it.\n", cArgs);
1305	break;
1306	case VERR_PARSE_NUMBER_TOO_BIG:
1307	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1308	"Error: Numeric overflow (argument %d).\n", cArgs);
1309	break;
1310	case VERR_PARSE_INVALID_OPERATION:
1311	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1312	"Error: Invalid operation attempted (argument %d).\n", cArgs);
1313	break;
1314	case VERR_PARSE_FUNCTION_NOT_FOUND:
1315	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1316	"Error: Function not found (argument %d).\n", cArgs);
1317	break;
1318	case VERR_PARSE_NOT_A_FUNCTION:
1319	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1320	"Error: The function specified is not a function (argument %d).\n", cArgs);
1321	break;
1322	case VERR_PARSE_NO_MEMORY:
1323	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1324	"Error: Out memory in the regular heap! Expect odd stuff to happen...\n", cArgs);
1325	break;
1326	case VERR_PARSE_INCORRECT_ARG_TYPE:
1327	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1328	"Error: Incorrect argument type (argument %d?).\n", cArgs);
1329	break;
1330	case VERR_PARSE_VARIABLE_NOT_FOUND:
1331	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1332	"Error: An undefined variable was referenced (argument %d).\n", cArgs);
1333	break;
1334	case VERR_PARSE_CONVERSION_FAILED:
1335	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1336	"Error: A conversion between two types failed (argument %d).\n", cArgs);
1337	break;
1338	case VERR_PARSE_NOT_IMPLEMENTED:
1339	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1340	"Error: You hit a debugger feature which isn't implemented yet (argument %d).\n", cArgs);
1341	break;
1342	case VERR_PARSE_BAD_RESULT_TYPE:
1343	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1344	"Error: Couldn't satisfy a request for a specific result type (argument %d). (Usually applies to symbols)\n", cArgs);
1345	break;
1346	case VERR_PARSE_WRITEONLY_SYMBOL:
1347	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1348	"Error: Cannot get symbol, it's set only (argument %d).\n", cArgs);
1349	break;
1350
1351	case VERR_DBGC_COMMAND_FAILED:
1352	rc = VINF_SUCCESS;
1353	break;
1354
1355	default:
1356	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1357	"Error: Unknown error %d!\n", rc);
1358	return rc;
1359	}
1360
1361	/*
1362	* Parse errors are non fatal.
1363	*/
1364	if (rc >= VERR_PARSE_FIRST && rc < VERR_PARSE_LAST)
1365	rc = VINF_SUCCESS;
1366	}
1367
1368	return rc;
1369	}
1370
1371
1372	/**
1373	* Process all commands currently in the buffer.
1374	*
1375	* @returns VBox status code. Any error indicates the termination of the console session.
1376	* @param pDbgc Debugger console instance data.
1377	* @param fNoExecute Indicates that no commands should actually be executed.
1378	*/
1379	static int dbgcProcessCommands(PDBGC pDbgc, bool fNoExecute)
1380	{
1381	int rc = 0;
1382	while (pDbgc->cInputLines)
1383	{
1384	/*
1385	* Empty the log buffer if we're hooking the log.
1386	*/
1387	if (pDbgc->fLog)
1388	{
1389	rc = dbgcProcessLog(pDbgc);
1390	if (RT_FAILURE(rc))
1391	break;
1392	}
1393
1394	if (pDbgc->iRead == pDbgc->iWrite)
1395	{
1396	AssertMsgFailed(("The input buffer is empty while cInputLines=%d!\n", pDbgc->cInputLines));
1397	pDbgc->cInputLines = 0;
1398	return 0;
1399	}
1400
1401	/*
1402	* Copy the command to the parse buffer.
1403	*/
1404	char ch;
1405	char *psz = &pDbgc->achInput[pDbgc->iRead];
1406	char *pszTrg = &pDbgc->achScratch[0];
1407	while ((pszTrg = ch = psz++) != ';' && ch != '\n' )
1408	{
1409	if (psz == &pDbgc->achInput[sizeof(pDbgc->achInput)])
1410	psz = &pDbgc->achInput[0];
1411
1412	if (psz == &pDbgc->achInput[pDbgc->iWrite])
1413	{
1414	AssertMsgFailed(("The buffer contains no commands while cInputLines=%d!\n", pDbgc->cInputLines));
1415	pDbgc->cInputLines = 0;
1416	return 0;
1417	}
1418
1419	pszTrg++;
1420	}
1421	*pszTrg = '\0';
1422
1423	/*
1424	* Advance the buffer.
1425	*/
1426	pDbgc->iRead = psz - &pDbgc->achInput[0];
1427	if (ch == '\n')
1428	pDbgc->cInputLines--;
1429
1430	/*
1431	* Parse and execute this command.
1432	*/
1433	pDbgc->pszScratch = psz;
1434	pDbgc->iArg = 0;
1435	rc = dbgcProcessCommand(pDbgc, &pDbgc->achScratch[0], psz - &pDbgc->achScratch[0] - 1, fNoExecute);
1436	if (rc)
1437	break;
1438	}
1439
1440	return rc;
1441	}
1442
1443
1444	/**
1445	* Handle input buffer overflow.
1446	*
1447	* Will read any available input looking for a '\n' to reset the buffer on.
1448	*
1449	* @returns VBox status.
1450	* @param pDbgc Debugger console instance data.
1451	*/
1452	static int dbgcInputOverflow(PDBGC pDbgc)
1453	{
1454	/*
1455	* Assert overflow status and reset the input buffer.
1456	*/
1457	if (!pDbgc->fInputOverflow)
1458	{
1459	pDbgc->fInputOverflow = true;
1460	pDbgc->iRead = pDbgc->iWrite = 0;
1461	pDbgc->cInputLines = 0;
1462	pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "Input overflow!!\n");
1463	}
1464
1465	/*
1466	* Eat input till no more or there is a '\n'.
1467	* When finding a '\n' we'll continue normal processing.
1468	*/
1469	while (pDbgc->pBack->pfnInput(pDbgc->pBack, 0))
1470	{
1471	size_t cbRead;
1472	int rc = pDbgc->pBack->pfnRead(pDbgc->pBack, &pDbgc->achInput[0], sizeof(pDbgc->achInput) - 1, &cbRead);
1473	if (RT_FAILURE(rc))
1474	return rc;
1475	char psz = (char )memchr(&pDbgc->achInput[0], '\n', cbRead);
1476	if (psz)
1477	{
1478	pDbgc->fInputOverflow = false;
1479	pDbgc->iRead = psz - &pDbgc->achInput[0] + 1;
1480	pDbgc->iWrite = (unsigned)cbRead;
1481	pDbgc->cInputLines = 0;
1482	break;
1483	}
1484	}
1485
1486	return 0;
1487	}
1488
1489
1490	/**
1491	* Read input and do some preprocessing.
1492	*
1493	* @returns VBox status.
1494	* In addition to the iWrite and achInput, cInputLines is maintained.
1495	* In case of an input overflow the fInputOverflow flag will be set.
1496	* @param pDbgc Debugger console instance data.
1497	*/
1498	static int dbgcInputRead(PDBGC pDbgc)
1499	{
1500	/*
1501	* We have ready input.
1502	* Read it till we don't have any or we have a full input buffer.
1503	*/
1504	int rc = 0;
1505	do
1506	{
1507	/*
1508	* More available buffer space?
1509	*/
1510	size_t cbLeft;
1511	if (pDbgc->iWrite > pDbgc->iRead)
1512	cbLeft = sizeof(pDbgc->achInput) - pDbgc->iWrite - (pDbgc->iRead == 0);
1513	else
1514	cbLeft = pDbgc->iRead - pDbgc->iWrite - 1;
1515	if (!cbLeft)
1516	{
1517	/* overflow? */
1518	if (!pDbgc->cInputLines)
1519	rc = dbgcInputOverflow(pDbgc);
1520	break;
1521	}
1522
1523	/*
1524	* Read one char and interpret it.
1525	*/
1526	char achRead[128];
1527	size_t cbRead;
1528	rc = pDbgc->pBack->pfnRead(pDbgc->pBack, &achRead[0], RT_MIN(cbLeft, sizeof(achRead)), &cbRead);
1529	if (RT_FAILURE(rc))
1530	return rc;
1531	char *psz = &achRead[0];
1532	while (cbRead-- > 0)
1533	{
1534	char ch = *psz++;
1535	switch (ch)
1536	{
1537	/*
1538	* Ignore.
1539	*/
1540	case '\0':
1541	case '\r':
1542	case '\a':
1543	break;
1544
1545	/*
1546	* Backspace.
1547	*/
1548	case '\b':
1549	Log2(("DBGC: backspace\n"));
1550	if (pDbgc->iRead != pDbgc->iWrite)
1551	{
1552	unsigned iWriteUndo = pDbgc->iWrite;
1553	if (pDbgc->iWrite)
1554	pDbgc->iWrite--;
1555	else
1556	pDbgc->iWrite = sizeof(pDbgc->achInput) - 1;
1557
1558	if (pDbgc->achInput[pDbgc->iWrite] == '\n')
1559	pDbgc->iWrite = iWriteUndo;
1560	}
1561	break;
1562
1563	/*
1564	* Add char to buffer.
1565	*/
1566	case '\t':
1567	case '\n':
1568	case ';':
1569	switch (ch)
1570	{
1571	case '\t': ch = ' '; break;
1572	case '\n': pDbgc->cInputLines++; break;
1573	}
1574	default:
1575	Log2(("DBGC: ch=%02x\n", (unsigned char)ch));
1576	pDbgc->achInput[pDbgc->iWrite] = ch;
1577	if (++pDbgc->iWrite >= sizeof(pDbgc->achInput))
1578	pDbgc->iWrite = 0;
1579	break;
1580	}
1581	}
1582
1583	/* Terminate it to make it easier to read in the debugger. */
1584	pDbgc->achInput[pDbgc->iWrite] = '\0';
1585	} while (pDbgc->pBack->pfnInput(pDbgc->pBack, 0));
1586
1587	return rc;
1588	}
1589
1590
1591	/**
1592	* Reads input, parses it and executes commands on '\n'.
1593	*
1594	* @returns VBox status.
1595	* @param pDbgc Debugger console instance data.
1596	* @param fNoExecute Indicates that no commands should actually be executed.
1597	*/
1598	int dbgcProcessInput(PDBGC pDbgc, bool fNoExecute)
1599	{
1600	/*
1601	* We know there's input ready, so let's read it first.
1602	*/
1603	int rc = dbgcInputRead(pDbgc);
1604	if (RT_FAILURE(rc))
1605	return rc;
1606
1607	/*
1608	* Now execute any ready commands.
1609	*/
1610	if (pDbgc->cInputLines)
1611	{
1612	pDbgc->pBack->pfnSetReady(pDbgc->pBack, false);
1613	pDbgc->fReady = false;
1614	rc = dbgcProcessCommands(pDbgc, fNoExecute);
1615	if (RT_SUCCESS(rc) && rc != VWRN_DBGC_CMD_PENDING)
1616	pDbgc->fReady = true;
1617
1618	if ( RT_SUCCESS(rc)
1619	&& pDbgc->iRead == pDbgc->iWrite
1620	&& pDbgc->fReady)
1621	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "VBoxDbg> ");
1622
1623	if ( RT_SUCCESS(rc)
1624	&& pDbgc->fReady)
1625	pDbgc->pBack->pfnSetReady(pDbgc->pBack, true);
1626	}
1627	else
1628	/* Received nonsense; just skip it. */
1629	pDbgc->iRead = pDbgc->iWrite;
1630
1631	return rc;
1632	}
1633
1634
1635	/**
1636	* Gets the event context identifier string.
1637	* @returns Read only string.
1638	* @param enmCtx The context.
1639	*/
1640	static const char *dbgcGetEventCtx(DBGFEVENTCTX enmCtx)
1641	{
1642	switch (enmCtx)
1643	{
1644	case DBGFEVENTCTX_RAW: return "raw";
1645	case DBGFEVENTCTX_REM: return "rem";
1646	case DBGFEVENTCTX_HWACCL: return "hwaccl";
1647	case DBGFEVENTCTX_HYPER: return "hyper";
1648	case DBGFEVENTCTX_OTHER: return "other";
1649
1650	case DBGFEVENTCTX_INVALID: return "!Invalid Event Ctx!";
1651	default:
1652	AssertMsgFailed(("enmCtx=%d\n", enmCtx));
1653	return "!Unknown Event Ctx!";
1654	}
1655	}
1656
1657
1658	/**
1659	* Processes debugger events.
1660	*
1661	* @returns VBox status.
1662	* @param pDbgc DBGC Instance data.
1663	* @param pEvent Pointer to event data.
1664	*/
1665	static int dbgcProcessEvent(PDBGC pDbgc, PCDBGFEVENT pEvent)
1666	{
1667	/*
1668	* Flush log first.
1669	*/
1670	if (pDbgc->fLog)
1671	{
1672	int rc = dbgcProcessLog(pDbgc);
1673	if (RT_FAILURE(rc))
1674	return rc;
1675	}
1676
1677	/*
1678	* Process the event.
1679	*/
1680	pDbgc->pszScratch = &pDbgc->achInput[0];
1681	pDbgc->iArg = 0;
1682	bool fPrintPrompt = true;
1683	int rc = VINF_SUCCESS;
1684	switch (pEvent->enmType)
1685	{
1686	/*
1687	* The first part is events we have initiated with commands.
1688	*/
1689	case DBGFEVENT_HALT_DONE:
1690	{
1691	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: VM %p is halted! (%s)\n",
1692	pDbgc->pVM, dbgcGetEventCtx(pEvent->enmCtx));
1693	pDbgc->fRegCtxGuest = true; /* we're always in guest context when halted. */
1694	if (RT_SUCCESS(rc))
1695	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1696	break;
1697	}
1698
1699
1700	/*
1701	* The second part is events which can occur at any time.
1702	*/
1703	case DBGFEVENT_FATAL_ERROR:
1704	{
1705	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbf event: Fatal error! (%s)\n",
1706	dbgcGetEventCtx(pEvent->enmCtx));
1707	pDbgc->fRegCtxGuest = false; /* fatal errors are always in hypervisor. */
1708	if (RT_SUCCESS(rc))
1709	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1710	break;
1711	}
1712
1713	case DBGFEVENT_BREAKPOINT:
1714	case DBGFEVENT_BREAKPOINT_HYPER:
1715	{
1716	bool fRegCtxGuest = pDbgc->fRegCtxGuest;
1717	pDbgc->fRegCtxGuest = pEvent->enmType == DBGFEVENT_BREAKPOINT;
1718
1719	rc = dbgcBpExec(pDbgc, pEvent->u.Bp.iBp);
1720	switch (rc)
1721	{
1722	case VERR_DBGC_BP_NOT_FOUND:
1723	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Unknown breakpoint %u! (%s)\n",
1724	pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx));
1725	break;
1726
1727	case VINF_DBGC_BP_NO_COMMAND:
1728	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Breakpoint %u! (%s)\n",
1729	pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx));
1730	break;
1731
1732	case VINF_BUFFER_OVERFLOW:
1733	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Breakpoint %u! Command too long to execute! (%s)\n",
1734	pEvent->u.Bp.iBp, dbgcGetEventCtx(pEvent->enmCtx));
1735	break;
1736
1737	default:
1738	break;
1739	}
1740	if (RT_SUCCESS(rc) && DBGFR3IsHalted(pDbgc->pVM))
1741	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1742	else
1743	pDbgc->fRegCtxGuest = fRegCtxGuest;
1744	break;
1745	}
1746
1747	case DBGFEVENT_STEPPED:
1748	case DBGFEVENT_STEPPED_HYPER:
1749	{
1750	pDbgc->fRegCtxGuest = pEvent->enmType == DBGFEVENT_STEPPED;
1751
1752	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf event: Single step! (%s)\n", dbgcGetEventCtx(pEvent->enmCtx));
1753	if (RT_SUCCESS(rc))
1754	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1755	break;
1756	}
1757
1758	case DBGFEVENT_ASSERTION_HYPER:
1759	{
1760	pDbgc->fRegCtxGuest = false;
1761
1762	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1763	"\ndbgf event: Hypervisor Assertion! (%s)\n"
1764	"%s"
1765	"%s"
1766	"\n",
1767	dbgcGetEventCtx(pEvent->enmCtx),
1768	pEvent->u.Assert.pszMsg1,
1769	pEvent->u.Assert.pszMsg2);
1770	if (RT_SUCCESS(rc))
1771	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1772	break;
1773	}
1774
1775	case DBGFEVENT_DEV_STOP:
1776	{
1777	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1778	"\n"
1779	"dbgf event: DBGFSTOP (%s)\n"
1780	"File: %s\n"
1781	"Line: %d\n"
1782	"Function: %s\n",
1783	dbgcGetEventCtx(pEvent->enmCtx),
1784	pEvent->u.Src.pszFile,
1785	pEvent->u.Src.uLine,
1786	pEvent->u.Src.pszFunction);
1787	if (RT_SUCCESS(rc) && pEvent->u.Src.pszMessage && *pEvent->u.Src.pszMessage)
1788	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
1789	"Message: %s\n",
1790	pEvent->u.Src.pszMessage);
1791	if (RT_SUCCESS(rc))
1792	rc = pDbgc->CmdHlp.pfnExec(&pDbgc->CmdHlp, "r");
1793	break;
1794	}
1795
1796
1797	case DBGFEVENT_INVALID_COMMAND:
1798	{
1799	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf/dbgc error: Invalid command event!\n");
1800	break;
1801	}
1802
1803	case DBGFEVENT_TERMINATING:
1804	{
1805	pDbgc->fReady = false;
1806	pDbgc->pBack->pfnSetReady(pDbgc->pBack, false);
1807	pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\nVM is terminating!\n");
1808	fPrintPrompt = false;
1809	rc = VERR_GENERAL_FAILURE;
1810	break;
1811	}
1812
1813
1814	default:
1815	{
1816	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\ndbgf/dbgc error: Unknown event %d!\n", pEvent->enmType);
1817	break;
1818	}
1819	}
1820
1821	/*
1822	* Prompt, anyone?
1823	*/
1824	if (fPrintPrompt && RT_SUCCESS(rc))
1825	{
1826	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "VBoxDbg> ");
1827	pDbgc->fReady = true;
1828	if (RT_SUCCESS(rc))
1829	pDbgc->pBack->pfnSetReady(pDbgc->pBack, true);
1830	}
1831
1832	return rc;
1833	}
1834
1835
1836	/**
1837	* Prints any log lines from the log buffer.
1838	*
1839	* The caller must not call function this unless pDbgc->fLog is set.
1840	*
1841	* @returns VBox status. (output related)
1842	* @param pDbgc Debugger console instance data.
1843	*/
1844	static int dbgcProcessLog(PDBGC pDbgc)
1845	{
1846	/** @todo */
1847	NOREF(pDbgc);
1848	return 0;
1849	}
1850
1851
1852	/**
1853	* Run the debugger console.
1854	*
1855	* @returns VBox status.
1856	* @param pDbgc Pointer to the debugger console instance data.
1857	*/
1858	int dbgcRun(PDBGC pDbgc)
1859	{
1860	/*
1861	* We're ready for commands now.
1862	*/
1863	pDbgc->fReady = true;
1864	pDbgc->pBack->pfnSetReady(pDbgc->pBack, true);
1865
1866	/*
1867	* Main Debugger Loop.
1868	*
1869	* This loop will either block on waiting for input or on waiting on
1870	* debug events. If we're forwarding the log we cannot wait for long
1871	* before we must flush the log.
1872	*/
1873	int rc = VINF_SUCCESS;
1874	for (;;)
1875	{
1876	if ( pDbgc->pVM
1877	&& DBGFR3CanWait(pDbgc->pVM))
1878	{
1879	/*
1880	* Wait for a debug event.
1881	*/
1882	PCDBGFEVENT pEvent;
1883	rc = DBGFR3EventWait(pDbgc->pVM, pDbgc->fLog ? 1 : 32, &pEvent);
1884	if (RT_SUCCESS(rc))
1885	{
1886	rc = dbgcProcessEvent(pDbgc, pEvent);
1887	if (RT_FAILURE(rc))
1888	break;
1889	}
1890	else if (rc != VERR_TIMEOUT)
1891	break;
1892
1893	/*
1894	* Check for input.
1895	*/
1896	if (pDbgc->pBack->pfnInput(pDbgc->pBack, 0))
1897	{
1898	rc = dbgcProcessInput(pDbgc, false /* fNoExecute */);
1899	if (RT_FAILURE(rc))
1900	break;
1901	}
1902	}
1903	else
1904	{
1905	/*
1906	* Wait for input. If Logging is enabled we'll only wait very briefly.
1907	*/
1908	if (pDbgc->pBack->pfnInput(pDbgc->pBack, pDbgc->fLog ? 1 : 1000))
1909	{
1910	rc = dbgcProcessInput(pDbgc, false /* fNoExecute */);
1911	if (RT_FAILURE(rc))
1912	break;
1913	}
1914	}
1915
1916	/*
1917	* Forward log output.
1918	*/
1919	if (pDbgc->fLog)
1920	{
1921	rc = dbgcProcessLog(pDbgc);
1922	if (RT_FAILURE(rc))
1923	break;
1924	}
1925	}
1926
1927	return rc;
1928	}
1929
1930
1931	/**
1932	* Creates a a new instance.
1933	*
1934	* @returns VBox status code.
1935	* @param ppDbgc Where to store the pointer to the instance data.
1936	* @param pBack Pointer to the backend.
1937	* @param fFlags The flags.
1938	*/
1939	int dbgcCreate(PDBGC *ppDbgc, PDBGCBACK pBack, unsigned fFlags)
1940	{
1941	/*
1942	* Validate input.
1943	*/
1944	AssertPtrReturn(pBack, VERR_INVALID_POINTER);
1945	AssertMsgReturn(!fFlags, ("%#x", fFlags), VERR_INVALID_PARAMETER);
1946
1947	/*
1948	* Allocate and initialize.
1949	*/
1950	PDBGC pDbgc = (PDBGC)RTMemAllocZ(sizeof(*pDbgc));
1951	if (!pDbgc)
1952	return VERR_NO_MEMORY;
1953
1954	dbgcInitCmdHlp(pDbgc);
1955	pDbgc->pBack = pBack;
1956	pDbgc->pVM = NULL;
1957	pDbgc->idCpu = NIL_VMCPUID;
1958	pDbgc->hDbgAs = DBGF_AS_GLOBAL;
1959	pDbgc->pszEmulation = "CodeView/WinDbg";
1960	pDbgc->paEmulationCmds = &g_aCmdsCodeView[0];
1961	pDbgc->cEmulationCmds = g_cCmdsCodeView;
1962	//pDbgc->fLog = false;
1963	pDbgc->fRegCtxGuest = true;
1964	pDbgc->fRegTerse = true;
1965	//pDbgc->cPagingHierarchyDumps = 0;
1966	//pDbgc->DisasmPos = {0};
1967	//pDbgc->SourcePos = {0};
1968	//pDbgc->DumpPos = {0};
1969	pDbgc->pLastPos = &pDbgc->DisasmPos;
1970	//pDbgc->cbDumpElement = 0;
1971	//pDbgc->cVars = 0;
1972	//pDbgc->paVars = NULL;
1973	//pDbgc->pPlugInHead = NULL;
1974	//pDbgc->pFirstBp = NULL;
1975	//pDbgc->abSearch = {0};
1976	//pDbgc->cbSearch = 0;
1977	pDbgc->cbSearchUnit = 1;
1978	pDbgc->cMaxSearchHits = 1;
1979	//pDbgc->SearchAddr = {0};
1980	//pDbgc->cbSearchRange = 0;
1981
1982	//pDbgc->uInputZero = 0;
1983	//pDbgc->iRead = 0;
1984	//pDbgc->iWrite = 0;
1985	//pDbgc->cInputLines = 0;
1986	//pDbgc->fInputOverflow = false;
1987	pDbgc->fReady = true;
1988	pDbgc->pszScratch = &pDbgc->achScratch[0];
1989	//pDbgc->iArg = 0;
1990	//pDbgc->rcOutput = 0;
1991	//pDbgc->rcCmd = 0;
1992
1993	dbgcInitOpCharBitMap();
1994
1995	*ppDbgc = pDbgc;
1996	return VINF_SUCCESS;
1997	}
1998
1999	/**
2000	* Destroys a DBGC instance created by dbgcCreate.
2001	*
2002	* @param pDbgc Pointer to the debugger console instance data.
2003	*/
2004	void dbgcDestroy(PDBGC pDbgc)
2005	{
2006	AssertPtr(pDbgc);
2007
2008	/* Disable log hook. */
2009	if (pDbgc->fLog)
2010	{
2011
2012	}
2013
2014	/* Unload all plug-ins. */
2015	dbgcPlugInUnloadAll(pDbgc);
2016
2017	/* Detach from the VM. */
2018	if (pDbgc->pVM)
2019	DBGFR3Detach(pDbgc->pVM);
2020
2021	/* finally, free the instance memory. */
2022	RTMemFree(pDbgc);
2023	}
2024
2025
2026	/**
2027	* Make a console instance.
2028	*
2029	* This will not return until either an 'exit' command is issued or a error code
2030	* indicating connection loss is encountered.
2031	*
2032	* @returns VINF_SUCCESS if console termination caused by the 'exit' command.
2033	* @returns The VBox status code causing the console termination.
2034	*
2035	* @param pVM VM Handle.
2036	* @param pBack Pointer to the backend structure. This must contain
2037	* a full set of function pointers to service the console.
2038	* @param fFlags Reserved, must be zero.
2039	* @remark A forced termination of the console is easiest done by forcing the
2040	* callbacks to return fatal failures.
2041	*/
2042	DBGDECL(int) DBGCCreate(PVM pVM, PDBGCBACK pBack, unsigned fFlags)
2043	{
2044	/*
2045	* Validate input.
2046	*/
2047	AssertPtrNullReturn(pVM, VERR_INVALID_POINTER);
2048
2049	/*
2050	* Allocate and initialize instance data
2051	*/
2052	PDBGC pDbgc;
2053	int rc = dbgcCreate(&pDbgc, pBack, fFlags);
2054	if (RT_FAILURE(rc))
2055	return rc;
2056
2057	/*
2058	* Print welcome message.
2059	*/
2060	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
2061	"Welcome to the VirtualBox Debugger!\n");
2062
2063	/*
2064	* Attach to the specified VM.
2065	*/
2066	if (RT_SUCCESS(rc) && pVM)
2067	{
2068	rc = DBGFR3Attach(pVM);
2069	if (RT_SUCCESS(rc))
2070	{
2071	pDbgc->pVM = pVM;
2072	pDbgc->idCpu = 0;
2073	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL,
2074	"Current VM is %08x, CPU #%u\n" /** @todo get and print the VM name! */
2075	, pDbgc->pVM, pDbgc->idCpu);
2076	}
2077	else
2078	rc = pDbgc->CmdHlp.pfnVBoxError(&pDbgc->CmdHlp, rc, "When trying to attach to VM %p\n", pDbgc->pVM);
2079	}
2080
2081	/*
2082	* Load plugins.
2083	*/
2084	if (RT_SUCCESS(rc))
2085	{
2086	if (pVM)
2087	dbgcPlugInAutoLoad(pDbgc);
2088	rc = pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "VBoxDbg> ");
2089	}
2090	else
2091	pDbgc->CmdHlp.pfnPrintf(&pDbgc->CmdHlp, NULL, "\nDBGCCreate error: %Rrc\n", rc);
2092
2093	/*
2094	* Run the debugger main loop.
2095	*/
2096	if (RT_SUCCESS(rc))
2097	rc = dbgcRun(pDbgc);
2098
2099	/*
2100	* Cleanup console debugger session.
2101	*/
2102	dbgcDestroy(pDbgc);
2103	return rc == VERR_DBGC_QUIT ? VINF_SUCCESS : rc;
2104	}
2105

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Debugger/DBGConsole.cpp@ 31987

Download in other formats: