/** @file * IPRT - Timer. */ /* * Copyright (C) 2006-2016 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_timer_h #define ___iprt_timer_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_timer RTTimer - Timer * * The IPRT timer API provides a simple abstraction of recurring and one-shot callback timers. * * Because of the great variation in the native APIs and the quality of * the service delivered by those native APIs, the timers are operated * on at best effort basis. * * All the ring-3 implementations are naturally at the mercy of the scheduler, * which means that the callback rate might vary quite a bit and we might skip * ticks. Many systems have a restriction that a process can only have one * timer. IPRT currently makes no efforts at multiplexing timers in those kind * of situations and will simply fail if you try to create more than one timer. * * Things are generally better in ring-0. The implementations will use interrupt * time callbacks wherever available, and if not, resort to a high priority * kernel thread. * * @ingroup grp_rt * @{ */ /** Timer handle. */ typedef struct RTTIMER *PRTTIMER; /** * Timer callback function. * * The context this call is made in varies with different platforms and * kernel / user mode IPRT. * * In kernel mode a timer callback should not waste time, it shouldn't * waste stack and it should be prepared that some APIs might not work * correctly because of weird OS restrictions in this context that we * haven't discovered and avoided yet. Please fix those APIs so they * at least avoid panics and weird behaviour. * * @param pTimer Timer handle. * @param pvUser User argument. * @param iTick The current timer tick. This is always 1 on the first * callback after the timer was started. For omni timers * this will be 1 when a cpu comes back online. */ typedef DECLCALLBACK(void) FNRTTIMER(PRTTIMER pTimer, void *pvUser, uint64_t iTick); /** Pointer to FNRTTIMER() function. */ typedef FNRTTIMER *PFNRTTIMER; /** * Create a recurring timer. * * @returns iprt status code. * @param ppTimer Where to store the timer handle. * @param uMilliesInterval Milliseconds between the timer ticks. * This is rounded up to the system granularity. * @param pfnTimer Callback function which shall be scheduled for execution * on every timer tick. * @param pvUser User argument for the callback. * @see RTTimerCreateEx, RTTimerStart, RTTimerStop, RTTimerChangeInterval, * RTTimerDestroy, RTTimerGetSystemGranularity */ RTDECL(int) RTTimerCreate(PRTTIMER *ppTimer, unsigned uMilliesInterval, PFNRTTIMER pfnTimer, void *pvUser); /** * Create a suspended timer. * * @returns iprt status code. * @retval VERR_NOT_SUPPORTED if an unsupported flag was specfied. * @retval VERR_CPU_NOT_FOUND if the specified CPU * * @param ppTimer Where to store the timer handle. * @param u64NanoInterval The interval between timer ticks specified in nanoseconds if it's * a recurring timer. This is rounded to the fit the system timer granularity. * For one shot timers, pass 0. * @param fFlags Timer flags. * @param pfnTimer Callback function which shall be scheduled for execution * on every timer tick. * @param pvUser User argument for the callback. * @see RTTimerStart, RTTimerStop, RTTimerChangeInterval, RTTimerDestroy, * RTTimerGetSystemGranularity, RTTimerCanDoHighResolution */ RTDECL(int) RTTimerCreateEx(PRTTIMER *ppTimer, uint64_t u64NanoInterval, uint32_t fFlags, PFNRTTIMER pfnTimer, void *pvUser); /** @name RTTimerCreateEx flags * @{ */ /** Any CPU is fine. (Must be 0.) */ #define RTTIMER_FLAGS_CPU_ANY UINT32_C(0) /** One specific CPU */ #define RTTIMER_FLAGS_CPU_SPECIFIC RT_BIT(16) /** Omni timer, run on all online CPUs. * @remarks The timer callback isn't necessarily running at the time same time on each CPU. */ #define RTTIMER_FLAGS_CPU_ALL ( RTTIMER_FLAGS_CPU_MASK | RTTIMER_FLAGS_CPU_SPECIFIC ) /** CPU mask. */ #define RTTIMER_FLAGS_CPU_MASK UINT32_C(0xffff) /** Desire a high resolution timer that works with RTTimerChangeInterval and * isn't subject to RTTimerGetSystemGranularity rounding. * @remarks This is quietly ignored if the feature isn't supported. */ #define RTTIMER_FLAGS_HIGH_RES RT_BIT(17) /** Convert a CPU set index (0-based) to RTTimerCreateEx flags. * This will automatically OR in the RTTIMER_FLAGS_CPU_SPECIFIC flag. */ #define RTTIMER_FLAGS_CPU(iCpu) ( (iCpu) | RTTIMER_FLAGS_CPU_SPECIFIC ) /** Macro that validates the flags. */ #define RTTIMER_FLAGS_ARE_VALID(fFlags) \ ( !((fFlags) & ~((fFlags) & RTTIMER_FLAGS_CPU_SPECIFIC ? UINT32_C(0x3ffff) : UINT32_C(0x30000))) ) /** @} */ /** * Stops and destroys a running timer. * * @returns iprt status code. * @retval VERR_INVALID_CONTEXT if executing at the wrong IRQL (windows), PIL * (solaris), or similar. Portable code does not destroy timers with * preemption (or interrupts) disabled. * @param pTimer Timer to stop and destroy. NULL is ok. */ RTDECL(int) RTTimerDestroy(PRTTIMER pTimer); /** * Starts a suspended timer. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_TIMER_ACTIVE if the timer isn't suspended. * @retval VERR_CPU_OFFLINE if the CPU the timer was created to run on is not * online (this include the case where it's not present in the * system). * * @param pTimer The timer to activate. * @param u64First The RTTimeSystemNanoTS() for when the timer should start * firing (relative). If 0 is specified, the timer will * fire ASAP. * @remarks When RTTimerCanDoHighResolution returns true, this API is * callable with preemption disabled in ring-0. * @see RTTimerStop */ RTDECL(int) RTTimerStart(PRTTIMER pTimer, uint64_t u64First); /** * Stops an active timer. * * @todo May return while the timer callback function is being services on * some platforms (ring-0 Windows, ring-0 linux). This needs to be * addressed at some point... * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_TIMER_SUSPENDED if the timer isn't active. * @retval VERR_NOT_SUPPORTED if the IPRT implementation doesn't support * stopping a timer. * * @param pTimer The timer to suspend. * @remarks Can be called from the timer callback function to stop it. * @see RTTimerStart */ RTDECL(int) RTTimerStop(PRTTIMER pTimer); /** * Changes the interval of a periodic timer. * * If the timer is active, it is implementation dependent whether the change * takes place immediately or after the next tick. To get defined behavior, * stop the timer before calling this API. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_NOT_SUPPORTED if not supported. * @retval VERR_INVALID_STATE if not a periodic timer. * * @param pTimer The timer to activate. * @param u64NanoInterval The interval between timer ticks specified in * nanoseconds. This is rounded to the fit the * system timer granularity. * @remarks Callable from the timer callback. Callable with preemption * disabled in ring-0. */ RTDECL(int) RTTimerChangeInterval(PRTTIMER pTimer, uint64_t u64NanoInterval); /** * Gets the (current) timer granularity of the system. * * @returns The timer granularity of the system in nanoseconds. * @see RTTimerRequestSystemGranularity */ RTDECL(uint32_t) RTTimerGetSystemGranularity(void); /** * Requests a specific system timer granularity. * * Successfull calls to this API must be coupled with the exact same number of * calls to RTTimerReleaseSystemGranularity() in order to undo any changes made. * * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if the requested value isn't supported by the host platform * or if the host platform doesn't support modifying the system timer granularity. * @retval VERR_PERMISSION_DENIED if the caller doesn't have the necessary privilege to * modify the system timer granularity. * * @param u32Request The requested system timer granularity in nanoseconds. * @param pu32Granted Where to store the granted system granularity. This is the value * that should be passed to RTTimerReleaseSystemGranularity(). It * is what RTTimerGetSystemGranularity() would return immediately * after the change was made. * * The value differ from the request in two ways; rounding and * scale. Meaning if your request is for 10.000.000 you might * be granted 10.000.055 or 1.000.000. * @see RTTimerReleaseSystemGranularity, RTTimerGetSystemGranularity */ RTDECL(int) RTTimerRequestSystemGranularity(uint32_t u32Request, uint32_t *pu32Granted); /** * Releases a system timer granularity grant acquired by RTTimerRequestSystemGranularity(). * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if the host platform doesn't have any way of modifying * the system timer granularity. * @retval VERR_WRONG_ORDER if nobody call RTTimerRequestSystemGranularity() with the * given grant value. * @param u32Granted The granted system granularity. * @see RTTimerRequestSystemGranularity */ RTDECL(int) RTTimerReleaseSystemGranularity(uint32_t u32Granted); /** * Checks if the system support high resolution timers. * * The kind of support we are checking for is the kind of dynamically * reprogrammable timers employed by recent Solaris and Linux kernels. It also * implies that we can specify microsecond (or even better maybe) intervals * without getting into trouble. * * @returns true if supported, false it not. * * @remarks Returning true also means RTTimerChangeInterval must be implemented * and RTTimerStart be callable with preemption disabled. */ RTDECL(bool) RTTimerCanDoHighResolution(void); /** * Timer callback function for low res timers. * * This is identical to FNRTTIMER except for the first parameter, so * see FNRTTIMER for details. * * @param hTimerLR The low resolution timer handle. * @param pvUser User argument. * @param iTick The current timer tick. This is always 1 on the first * callback after the timer was started. Will jump if we've * skipped ticks when lagging behind. */ typedef DECLCALLBACK(void) FNRTTIMERLR(RTTIMERLR hTimerLR, void *pvUser, uint64_t iTick); /** Pointer to FNRTTIMER() function. */ typedef FNRTTIMERLR *PFNRTTIMERLR; /** * Create a recurring low resolution timer. * * @returns iprt status code. * @param phTimerLR Where to store the timer handle. * @param uMilliesInterval Milliseconds between the timer ticks, at least 100 ms. * If higher resolution is required use the other API. * @param pfnTimer Callback function which shall be scheduled for execution * on every timer tick. * @param pvUser User argument for the callback. * @see RTTimerLRCreateEx, RTTimerLRDestroy, RTTimerLRStop */ RTDECL(int) RTTimerLRCreate(PRTTIMERLR phTimerLR, uint32_t uMilliesInterval, PFNRTTIMERLR pfnTimer, void *pvUser); /** * Create a suspended low resolution timer. * * @returns iprt status code. * @retval VERR_NOT_SUPPORTED if an unsupported flag was specfied. * * @param phTimerLR Where to store the timer handle. * @param u64NanoInterval The interval between timer ticks specified in nanoseconds if it's * a recurring timer, the minimum for is 100000000 ns. * For one shot timers, pass 0. * @param fFlags Timer flags. Same as RTTimerCreateEx. * @param pfnTimer Callback function which shall be scheduled for execution * on every timer tick. * @param pvUser User argument for the callback. * @see RTTimerLRStart, RTTimerLRStop, RTTimerLRDestroy */ RTDECL(int) RTTimerLRCreateEx(PRTTIMERLR phTimerLR, uint64_t u64NanoInterval, uint32_t fFlags, PFNRTTIMERLR pfnTimer, void *pvUser); /** * Stops and destroys a running low resolution timer. * * @returns iprt status code. * @param hTimerLR The low resolution timer to stop and destroy. * NIL_RTTIMERLR is accepted. */ RTDECL(int) RTTimerLRDestroy(RTTIMERLR hTimerLR); /** * Starts a low resolution timer. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_TIMER_ACTIVE if the timer isn't suspended. * * @param hTimerLR The low resolution timer to activate. * @param u64First The RTTimeSystemNanoTS() for when the timer should start * firing (relative), the minimum is 100000000 ns. * If 0 is specified, the timer will fire ASAP. * * @see RTTimerLRStop */ RTDECL(int) RTTimerLRStart(RTTIMERLR hTimerLR, uint64_t u64First); /** * Stops an active low resolution timer. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_TIMER_SUSPENDED if the timer isn't active. * @retval VERR_NOT_SUPPORTED if the IPRT implementation doesn't support stopping a timer. * * @param hTimerLR The low resolution timer to suspend. * * @see RTTimerLRStart */ RTDECL(int) RTTimerLRStop(RTTIMERLR hTimerLR); /** * Changes the interval of a low resolution timer. * * If the timer is active, the next tick will occure immediately just like with * RTTimerLRStart() when u64First parameter is zero. * * @returns IPRT status code. * @retval VERR_INVALID_HANDLE if pTimer isn't valid. * @retval VERR_NOT_SUPPORTED if not supported. * * @param hTimerLR The low resolution timer to update. * @param u64NanoInterval The interval between timer ticks specified in * nanoseconds. This is rounded to the fit the * system timer granularity. * @remarks Callable from the timer callback. */ RTDECL(int) RTTimerLRChangeInterval(RTTIMERLR hTimerLR, uint64_t u64NanoInterval); /** @} */ RT_C_DECLS_END #endif