/** @file * IPRT - Heap Implementations */ /* * Copyright (C) 2006-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_heap_h #define ___iprt_heap_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_heap RTHeap - Heap Implementations * @ingroup grp_rt * @{ */ /** @defgroup grp_rt_heap_simple RTHeapSimple - Simple Heap * @{ */ /** * Initializes the heap. * * @returns IPRT status code. * @param pHeap Where to store the heap anchor block on success. * @param pvMemory Pointer to the heap memory. * @param cbMemory The size of the heap memory. */ RTDECL(int) RTHeapSimpleInit(PRTHEAPSIMPLE pHeap, void *pvMemory, size_t cbMemory); /** * Merge two simple heaps into one. * * The requirement is of course that they next two each other memory wise. * * @returns IPRT status code. * @param pHeap Where to store the handle to the merged heap on success. * @param Heap1 Handle to the first heap. * @param Heap2 Handle to the second heap. * @remark This API isn't implemented yet. */ RTDECL(int) RTHeapSimpleMerge(PRTHEAPSIMPLE pHeap, RTHEAPSIMPLE Heap1, RTHEAPSIMPLE Heap2); /** * Relocater the heap internal structures after copying it to a new location. * * This can be used when loading a saved heap. * * @returns IPRT status code. * @param hHeap Heap handle that has already been adjusted by to the new * location. That is to say, when calling * RTHeapSimpleInit, the caller must note the offset of the * returned heap handle into the heap memory. This offset * must be used when calcuating the handle value for the * new location. The offset may in some cases not be zero! * @param offDelta The delta between the new and old location, i.e. what * should be added to the internal pointers. */ RTDECL(int) RTHeapSimpleRelocate(RTHEAPSIMPLE hHeap, uintptr_t offDelta); /** * Allocates memory from the specified simple heap. * * @returns Pointer to the allocated memory block on success. * @returns NULL if the request cannot be satisfied. (A VERR_NO_MEMORY condition.) * * @param Heap The heap to allocate the memory on. * @param cb The requested heap block size. * @param cbAlignment The requested heap block alignment. Pass 0 for default alignment. * Must be a power of 2. */ RTDECL(void *) RTHeapSimpleAlloc(RTHEAPSIMPLE Heap, size_t cb, size_t cbAlignment); /** * Allocates zeroed memory from the specified simple heap. * * @returns Pointer to the allocated memory block on success. * @returns NULL if the request cannot be satisfied. (A VERR_NO_MEMORY condition.) * * @param Heap The heap to allocate the memory on. * @param cb The requested heap block size. * @param cbAlignment The requested heap block alignment. Pass 0 for default alignment. * Must be a power of 2. */ RTDECL(void *) RTHeapSimpleAllocZ(RTHEAPSIMPLE Heap, size_t cb, size_t cbAlignment); /** * Reallocates / Allocates / Frees a heap block. * * @param Heap The heap. This is optional and will only be used for strict assertions. * @param pv The heap block returned by RTHeapSimple. If NULL it behaves like RTHeapSimpleAlloc(). * @param cbNew The new size of the heap block. If NULL it behaves like RTHeapSimpleFree(). * @param cbAlignment The requested heap block alignment. Pass 0 for default alignment. * Must be a power of 2. * @remark This API isn't implemented yet. */ RTDECL(void *) RTHeapSimpleRealloc(RTHEAPSIMPLE Heap, void *pv, size_t cbNew, size_t cbAlignment); /** * Reallocates / Allocates / Frees a heap block, zeroing any new bits. * * @param Heap The heap. This is optional and will only be used for strict assertions. * @param pv The heap block returned by RTHeapSimple. If NULL it behaves like RTHeapSimpleAllocZ(). * @param cbNew The new size of the heap block. If NULL it behaves like RTHeapSimpleFree(). * @param cbAlignment The requested heap block alignment. Pass 0 for default alignment. * Must be a power of 2. * @remark This API isn't implemented yet. */ RTDECL(void *) RTHeapSimpleReallocZ(RTHEAPSIMPLE Heap, void *pv, size_t cbNew, size_t cbAlignment); /** * Frees memory allocated from a simple heap. * * @param Heap The heap. This is optional and will only be used for strict assertions. * @param pv The heap block returned by RTHeapSimple */ RTDECL(void) RTHeapSimpleFree(RTHEAPSIMPLE Heap, void *pv); /** * Gets the size of the specified heap block. * * @returns The actual size of the heap block. * @returns 0 if \a pv is NULL or it doesn't point to a valid heap block. An invalid \a pv * can also cause traps or trigger assertions. * @param Heap The heap. This is optional and will only be used for strict assertions. * @param pv The heap block returned by RTHeapSimple */ RTDECL(size_t) RTHeapSimpleSize(RTHEAPSIMPLE Heap, void *pv); /** * Gets the size of the heap. * * This size includes all the internal heap structures. So, even if the heap is * empty the RTHeapSimpleGetFreeSize() will never reach the heap size returned * by this function. * * @returns The heap size. * @returns 0 if heap was safely detected as being bad. * @param Heap The heap. */ RTDECL(size_t) RTHeapSimpleGetHeapSize(RTHEAPSIMPLE Heap); /** * Returns the sum of all free heap blocks. * * This is the amount of memory you can theoretically allocate * if you do allocations exactly matching the free blocks. * * @returns The size of the free blocks. * @returns 0 if heap was safely detected as being bad. * @param Heap The heap. */ RTDECL(size_t) RTHeapSimpleGetFreeSize(RTHEAPSIMPLE Heap); /** * Printf like callbaclk function for RTHeapSimpleDump. * @param pszFormat IPRT format string. * @param ... Format arguments. */ typedef DECLCALLBACK(void) FNRTHEAPSIMPLEPRINTF(const char *pszFormat, ...); /** Pointer to a FNRTHEAPSIMPLEPRINTF function. */ typedef FNRTHEAPSIMPLEPRINTF *PFNRTHEAPSIMPLEPRINTF; /** * Dumps the hypervisor heap. * * @param Heap The heap handle. * @param pfnPrintf Printf like function that groks IPRT formatting. */ RTDECL(void) RTHeapSimpleDump(RTHEAPSIMPLE Heap, PFNRTHEAPSIMPLEPRINTF pfnPrintf); /** @} */ /** @defgroup grp_rt_heap_offset RTHeapOffset - Offset Based Heap * * This is a variation on the simple heap that doesn't use pointers internally * and therefore can be saved and restored without any extra effort. * * @{ */ /** * Initializes the heap. * * @returns IPRT status code. * @param phHeap Where to store the heap anchor block on success. * @param pvMemory Pointer to the heap memory. * @param cbMemory The size of the heap memory. */ RTDECL(int) RTHeapOffsetInit(PRTHEAPOFFSET phHeap, void *pvMemory, size_t cbMemory); /** * Merge two simple heaps into one. * * The requirement is of course that they next two each other memory wise. * * @returns IPRT status code. * @param phHeap Where to store the handle to the merged heap on success. * @param hHeap1 Handle to the first heap. * @param hHeap2 Handle to the second heap. * @remark This API isn't implemented yet. */ RTDECL(int) RTHeapOffsetMerge(PRTHEAPOFFSET phHeap, RTHEAPOFFSET hHeap1, RTHEAPOFFSET hHeap2); /** * Allocates memory from the specified simple heap. * * @returns Pointer to the allocated memory block on success. * @returns NULL if the request cannot be satisfied. (A VERR_NO_MEMORY condition.) * * @param hHeap The heap to allocate the memory on. * @param cb The requested heap block size. * @param cbAlignment The requested heap block alignment. Pass 0 for default alignment. * Must be a power of 2. */ RTDECL(void *) RTHeapOffsetAlloc(RTHEAPOFFSET hHeap, size_t cb, size_t cbAlignment); /** * Allocates zeroed memory from the specified simple heap. * * @returns Pointer to the allocated memory block on success. * @returns NULL if the request cannot be satisfied. (A VERR_NO_MEMORY condition.) * * @param hHeap The heap to allocate the memory on. * @param cb The requested heap block size. * @param cbAlignment The requested heap block alignment. Pass 0 for default * alignment. Must be a power of 2. */ RTDECL(void *) RTHeapOffsetAllocZ(RTHEAPOFFSET hHeap, size_t cb, size_t cbAlignment); /** * Reallocates / Allocates / Frees a heap block. * * @param hHeap The heap handle. This is optional and will only be used * for strict assertions. * @param pv The heap block returned by RTHeapOffset. If NULL it * behaves like RTHeapOffsetAlloc(). * @param cbNew The new size of the heap block. If NULL it behaves like * RTHeapOffsetFree(). * @param cbAlignment The requested heap block alignment. Pass 0 for default * alignment. Must be a power of 2. * @remark This API isn't implemented yet. */ RTDECL(void *) RTHeapOffsetRealloc(RTHEAPOFFSET hHeap, void *pv, size_t cbNew, size_t cbAlignment); /** * Reallocates / Allocates / Frees a heap block, zeroing any new bits. * * @param hHeap The heap handle. This is optional and will only be used * for strict assertions. * @param pv The heap block returned by RTHeapOffset. If NULL it * behaves like RTHeapOffsetAllocZ(). * @param cbNew The new size of the heap block. If NULL it behaves like * RTHeapOffsetFree(). * @param cbAlignment The requested heap block alignment. Pass 0 for default * alignment. Must be a power of 2. * @remark This API isn't implemented yet. */ RTDECL(void *) RTHeapOffsetReallocZ(RTHEAPOFFSET hHeap, void *pv, size_t cbNew, size_t cbAlignment); /** * Frees memory allocated from a simple heap. * * @param hHeap The heap handle. This is optional and will only be used * for strict assertions. * @param pv The heap block returned by RTHeapOffset */ RTDECL(void) RTHeapOffsetFree(RTHEAPOFFSET hHeap, void *pv); /** * Gets the size of the specified heap block. * * @returns The actual size of the heap block. * @returns 0 if \a pv is NULL or it doesn't point to a valid heap block. An * invalid \a pv can also cause traps or trigger assertions. * * @param hHeap The heap handle. This is optional and will only be used * for strict assertions. * @param pv The heap block returned by RTHeapOffset */ RTDECL(size_t) RTHeapOffsetSize(RTHEAPOFFSET hHeap, void *pv); /** * Gets the size of the heap. * * This size includes all the internal heap structures. So, even if the heap is * empty the RTHeapOffsetGetFreeSize() will never reach the heap size returned * by this function. * * @returns The heap size. * @returns 0 if heap was safely detected as being bad. * @param hHeap The heap handle. */ RTDECL(size_t) RTHeapOffsetGetHeapSize(RTHEAPOFFSET hHeap); /** * Returns the sum of all free heap blocks. * * This is the amount of memory you can theoretically allocate * if you do allocations exactly matching the free blocks. * * @returns The size of the free blocks. * @returns 0 if heap was safely detected as being bad. * @param hHeap The heap handle. */ RTDECL(size_t) RTHeapOffsetGetFreeSize(RTHEAPOFFSET hHeap); /** * Printf like callbaclk function for RTHeapOffsetDump. * @param pszFormat IPRT format string. * @param ... Format arguments. */ typedef DECLCALLBACK(void) FNRTHEAPOFFSETPRINTF(const char *pszFormat, ...); /** Pointer to a FNRTHEAPOFFSETPRINTF function. */ typedef FNRTHEAPOFFSETPRINTF *PFNRTHEAPOFFSETPRINTF; /** * Dumps the hypervisor heap. * * @param hHeap The heap handle. * @param pfnPrintf Printf like function that groks IPRT formatting. */ RTDECL(void) RTHeapOffsetDump(RTHEAPOFFSET hHeap, PFNRTHEAPOFFSETPRINTF pfnPrintf); /** @} */ /** @} */ RT_C_DECLS_END #endif