/** @file * PDM - Pluggable Device Manager, raw PCI Devices. (VMM) */ /* * Copyright (C) 2010-2016 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___VBox_vmm_pdmpci_h #define ___VBox_vmm_pdmpci_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_pdm_pcidev The raw PCI Devices API * @ingroup grp_pdm * @{ */ typedef struct PDMIPCIRAW *PPDMIPCIRAW; typedef struct PDMIPCIRAW { /** * Notify virtual device that interrupt has arrived. * For this callback to be called, interface have to be * registered with PDMIPCIRAWUP::pfnRegisterInterruptListener. * * @note no level parameter, as we can only support flip-flop. * * @param pInterface Pointer to this interface structure. * @param iGuestIrq Guest interrupt number, passed earlier when registering listener. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnInterruptRequest,(PPDMIPCIRAW pInterface, int32_t iGuestIrq)); } PDMIPCIRAW; typedef struct PDMIPCIRAWUP *PPDMIPCIRAWUP; typedef struct PDMIPCIRAWUP { /** * Host PCI MMIO access function. */ /** * Request driver info about PCI region on host PCI device. * * @returns true, if region is present, and out parameters are correct * @param pInterface Pointer to this interface structure. * @param iRegion Region number. * @param pGCPhysRegion Where to store region base address (guest). * @param pcbRegion Where to store region size. * * @param fMmio If region is MMIO or IO. * @thread Any thread. */ DECLR3CALLBACKMEMBER(bool, pfnGetRegionInfo, (PPDMIPCIRAWUP pInterface, uint32_t iRegion, RTGCPHYS *pGCPhysRegion, uint64_t *pcbRegion, uint32_t *pfFlags)); /** * Request driver to map part of host device's MMIO region to the VM process and maybe kernel. * Shall only be issued within earlier obtained with pfnGetRegionInfo() * host physical address ranges for the device BARs. Even if failed, device still may function * using pfnMmio* and pfnPio* operations, just much slower. * * @returns status code * @param pInterface Pointer to this interface structure. * @param iRegion Number of the region. * @param StartAddress Host physical address of start. * @param cbRegion Size of the region. * @param fFlags Flags, currently lowest significant bit set if R0 mapping requested too * @param ppvAddressR3 Where to store mapped region address for R3 (can be 0, if cannot map into userland) * @param ppvAddressR0 Where to store mapped region address for R0 (can be 0, if cannot map into kernel) * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnMapRegion, (PPDMIPCIRAWUP pInterface, uint32_t iRegion, RTHCPHYS StartAddress, uint64_t cbRegion, uint32_t fFlags, PRTR3PTR ppvAddressR3, PRTR0PTR ppvAddressR0)); /** * Request driver to unmap part of host device's MMIO region to the VM process. * Shall only be issued with pointer earlier obtained with pfnMapRegion(). * * @returns status code * @param pInterface Pointer to this interface structure * @param iRegion Number of the region. * @param StartAddress Host physical address of start. * @param cbRegion Size of the region. * @param pvAddressR3 R3 address of mapped region. * @param pvAddressR0 R0 address of mapped region. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnUnmapRegion, (PPDMIPCIRAWUP pInterface, uint32_t iRegion, RTHCPHYS StartAddress, uint64_t cbRegion, RTR3PTR pvAddressR3, RTR0PTR pvAddressR0)); /** * Request port IO write. * * @returns status code * @param pInterface Pointer to this interface structure. * @param uPort I/O port address. * @param uValue Value to write. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnPioWrite, (PPDMIPCIRAWUP pInterface, RTIOPORT uPort, uint32_t uValue, unsigned cb)); /** * Request port IO read. * * @returns status code * @param pInterface Pointer to this interface structure. * @param uPort I/O port address. * @param puValue Place to store read value. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnPioRead, (PPDMIPCIRAWUP pInterface, RTIOPORT uPort, uint32_t *puValue, unsigned cb)); /** * Request MMIO write. This callback is only called if driver wants to receive MMIO via * pu32Flags argument of pfnPciDeviceConstructStart(). * * @returns status code * @param pInterface Pointer to this interface structure. * @param Address Guest physical address. * @param pvValue Address of value to write. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnMmioWrite, (PPDMIPCIRAWUP pInterface, RTR0PTR Address, /**< Why is this documented as guest physical address and given a host ring-0 address type??? */ void const *pvValue, unsigned cb)); /** * Request MMIO read. * * @returns status code * @param pInterface Pointer to this interface structure. * @param Address Guest physical address. * @param pvValue Place to store read value. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnMmioRead, (PPDMIPCIRAWUP pInterface, RTR0PTR Address, /**< Why is this documented as guest physical address and given a host ring-0 address type??? */ void *pvValue, unsigned cb)); /** * Host PCI config space accessors. */ /** * Request driver to write value to host device's PCI config space. * Host specific way (PIO or MCFG) is used to perform actual operation. * * @returns status code * @param pInterface Pointer to this interface structure. * @param offCfgSpace Offset in PCI config space. * @param pvValue Value to write. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnPciCfgWrite, (PPDMIPCIRAWUP pInterface, uint32_t offCfgSpace, void *pvValue, unsigned cb)); /** * Request driver to read value from host device's PCI config space. * Host specific way (PIO or MCFG) is used to perform actual operation. * * @returns status code * @param pInterface Pointer to this interface structure. * @param offCfgSpace Offset in PCI config space. * @param pvValue Where to store read value. * @param cb Access width. * * @thread EMT thread. */ DECLR3CALLBACKMEMBER(int, pfnPciCfgRead, (PPDMIPCIRAWUP pInterface, uint32_t offCfgSpace, void *pvValue, unsigned cb)); /** * Request to enable interrupt notifications. Please note that this is purely * R3 interface, so it's up to implementor to perform necessary machinery * for communications with host OS kernel driver. Typical implementation will start * userland thread waiting on shared semaphore (such as using SUPSEMEVENT), * notified by the kernel interrupt handler, and then will call * upper port pfnInterruptRequest() based on data provided by the driver. * This apporach is taken, as calling VBox code from an asyncronous R0 * interrupt handler when VMM may not be even running doesn't look * like a good idea. * * @returns status code * @param pInterface Pointer to this interface structure. * @param pListener Pointer to the listener object. * @param uGuestIrq Guest IRQ to be passed to pfnInterruptRequest(). * * @thread Any thread, pfnInterruptRequest() will be usually invoked on a dedicated thread. */ DECLR3CALLBACKMEMBER(int, pfnEnableInterruptNotifications, (PPDMIPCIRAWUP pInterface, uint8_t uGuestIrq)); /** * Request to disable interrupt notifications. * * @returns status code * @param pInterface Pointer to this interface structure. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnDisableInterruptNotifications, (PPDMIPCIRAWUP pInterface)); /** @name Notification APIs. * @{ */ /** * Notify driver when raw PCI device construction starts. * * Have to be the first operation as initializes internal state and opens host * device driver. * * @returns status code * @param pInterface Pointer to this interface structure. * @param uHostPciAddress Host PCI address of device attached. * @param uGuestPciAddress Guest PCI address of device attached. * @param pszDeviceName Human readable device name. * @param fDeviceFlags Flags for the host device. * @param pfFlags Flags for virtual device, from the upper driver. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnPciDeviceConstructStart, (PPDMIPCIRAWUP pInterface, uint32_t uHostPciAddress, uint32_t uGuestPciAddress, const char *pszDeviceName, uint32_t fDeviceFlags, uint32_t *pfFlags)); /** * Notify driver when raw PCI device construction completes, so that it may * perform further actions depending on success or failure of this operation. * Standard action is to raise global IHostPciDevicePlugEvent. * * @param pInterface Pointer to this interface structure. * @param rc Result code of the operation. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(void, pfnPciDeviceConstructComplete, (PPDMIPCIRAWUP pInterface, int rc)); /** * Notify driver on finalization of raw PCI device. * * @param pInterface Pointer to this interface structure. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnPciDeviceDestruct, (PPDMIPCIRAWUP pInterface, uint32_t fFlags)); /** * Notify driver on guest power state change. * * @param pInterface Pointer to this interface structure. * @param enmState New power state. * @param pu64Param State-specific in/out parameter. For now only used during power-on to provide VM caps. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnPciDevicePowerStateChange, (PPDMIPCIRAWUP pInterface, PCIRAWPOWERSTATE enmState, uint64_t *pu64Param)); /** * Notify driver about runtime error. * * @param pInterface Pointer to this interface structure. * @param fFatal If error is fatal. * @param szErrorId Error ID. * @param szMessage Error message. * * @thread Any thread. */ DECLR3CALLBACKMEMBER(int, pfnReportRuntimeError, (PPDMIPCIRAWUP pInterface, bool fFatal, const char *pszErrorId, const char *pszMessage)); /** @} */ } PDMIPCIRAWUP; /** * Init R0 PCI module. */ PCIRAWR0DECL(int) PciRawR0Init(void); /** * Process request (in R0). */ PCIRAWR0DECL(int) PciRawR0ProcessReq(PSUPDRVSESSION pSession, PVM pVM, PPCIRAWSENDREQ pReq); /** * Terminate R0 PCI module. */ PCIRAWR0DECL(void) PciRawR0Term(void); /** * Per-VM R0 module init. */ PCIRAWR0DECL(int) PciRawR0InitVM(PVM pVM); /** * Per-VM R0 module termination routine. */ PCIRAWR0DECL(void) PciRawR0TermVM(PVM pVM); /** * Flags returned by pfnPciDeviceConstructStart(), to notify device * how it shall handle device IO traffic. */ typedef enum PCIRAWDEVICEFLAGS { /** Intercept port IO (R3 PIO always go to the driver). */ PCIRAWRFLAG_CAPTURE_PIO = (1 << 0), /** Intercept MMIO. */ PCIRAWRFLAG_CAPTURE_MMIO = (1 << 1), /** Allow bus mastering by physical device (requires IOMMU). */ PCIRAWRFLAG_ALLOW_BM = (1 << 2), /** Allow R3 MMIO mapping. */ PCIRAWRFLAG_ALLOW_R3MAP = (1 << 3), /** The usual 32-bit type blow up. */ PCIRAWRFLAG_32BIT_HACK = 0x7fffffff } PCIRAWDEVICEFLAGS; #define PDMIPCIRAWUP_IID "06daa17f-097b-4ebe-a626-15f467b1de12" #define PDMIPCIRAW_IID "68c6e4c4-4223-47e0-9134-e3c297992543" /** @} */ RT_C_DECLS_END #endif