sup.h@ 46093

Last change on this file since 46093 was 44528, checked in by vboxsync, 12 years ago
header (C) fixes
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 63.2 KB

Line
1	/** @file
2	* SUP - Support Library. (HDrv)
3	*/
4
5	/*
6	* Copyright (C) 2006-2012 Oracle Corporation
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License (GPL) as published by the Free Software
12	* Foundation, in version 2 as it comes in the "COPYING" file of the
13	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* The contents of this file may alternatively be used under the terms
17	* of the Common Development and Distribution License Version 1.0
18	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19	* VirtualBox OSE distribution, in which case the provisions of the
20	* CDDL are applicable instead of those of the GPL.
21	*
22	* You may elect to license modified versions of this file under the
23	* terms and conditions of either the GPL or the CDDL or both.
24	*/
25
26	#ifndef ___VBox_sup_h
27	#define ___VBox_sup_h
28
29	#include <VBox/cdefs.h>
30	#include <VBox/types.h>
31	#include <iprt/assert.h>
32	#include <iprt/stdarg.h>
33	#include <iprt/cpuset.h>
34
35	RT_C_DECLS_BEGIN
36
37	struct VTGOBJHDR;
38	struct VTGPROBELOC;
39
40
41	/** @defgroup grp_sup The Support Library API
42	* @{
43	*/
44
45	/**
46	* Physical page descriptor.
47	*/
48	#pragma pack(4) /* space is more important. */
49	typedef struct SUPPAGE
50	{
51	/** Physical memory address. */
52	RTHCPHYS Phys;
53	/** Reserved entry for internal use by the caller. */
54	RTHCUINTPTR uReserved;
55	} SUPPAGE;
56	#pragma pack()
57	/** Pointer to a page descriptor. */
58	typedef SUPPAGE *PSUPPAGE;
59	/** Pointer to a const page descriptor. */
60	typedef const SUPPAGE *PCSUPPAGE;
61
62	/**
63	* The paging mode.
64	*
65	* @remarks Users are making assumptions about the order here!
66	*/
67	typedef enum SUPPAGINGMODE
68	{
69	/** The usual invalid entry.
70	* This is returned by SUPR3GetPagingMode() */
71	SUPPAGINGMODE_INVALID = 0,
72	/** Normal 32-bit paging, no global pages */
73	SUPPAGINGMODE_32_BIT,
74	/** Normal 32-bit paging with global pages. */
75	SUPPAGINGMODE_32_BIT_GLOBAL,
76	/** PAE mode, no global pages, no NX. */
77	SUPPAGINGMODE_PAE,
78	/** PAE mode with global pages. */
79	SUPPAGINGMODE_PAE_GLOBAL,
80	/** PAE mode with NX, no global pages. */
81	SUPPAGINGMODE_PAE_NX,
82	/** PAE mode with global pages and NX. */
83	SUPPAGINGMODE_PAE_GLOBAL_NX,
84	/** AMD64 mode, no global pages. */
85	SUPPAGINGMODE_AMD64,
86	/** AMD64 mode with global pages, no NX. */
87	SUPPAGINGMODE_AMD64_GLOBAL,
88	/** AMD64 mode with NX, no global pages. */
89	SUPPAGINGMODE_AMD64_NX,
90	/** AMD64 mode with global pages and NX. */
91	SUPPAGINGMODE_AMD64_GLOBAL_NX
92	} SUPPAGINGMODE;
93
94	/**
95	* Usermode probe context information.
96	*/
97	typedef struct SUPDRVTRACERUSRCTX
98	{
99	/** The probe ID from the VTG location record. */
100	uint32_t idProbe;
101	/** 32 if X86, 64 if AMD64. */
102	uint8_t cBits;
103	/** Reserved padding. */
104	uint8_t abReserved[3];
105	/** Data which format is dictated by the cBits member. */
106	union
107	{
108	/** X86 context info. */
109	struct
110	{
111	uint32_t uVtgProbeLoc; /*< Location record address. /
112	uint32_t aArgs[20]; /*< Raw arguments. /
113	uint32_t eip;
114	uint32_t eflags;
115	uint32_t eax;
116	uint32_t ecx;
117	uint32_t edx;
118	uint32_t ebx;
119	uint32_t esp;
120	uint32_t ebp;
121	uint32_t esi;
122	uint32_t edi;
123	uint16_t cs;
124	uint16_t ss;
125	uint16_t ds;
126	uint16_t es;
127	uint16_t fs;
128	uint16_t gs;
129	} X86;
130
131	/** AMD64 context info. */
132	struct
133	{
134	uint64_t uVtgProbeLoc; /*< Location record address. /
135	uint64_t aArgs[10]; /*< Raw arguments. /
136	uint64_t rip;
137	uint64_t rflags;
138	uint64_t rax;
139	uint64_t rcx;
140	uint64_t rdx;
141	uint64_t rbx;
142	uint64_t rsp;
143	uint64_t rbp;
144	uint64_t rsi;
145	uint64_t rdi;
146	uint64_t r8;
147	uint64_t r9;
148	uint64_t r10;
149	uint64_t r11;
150	uint64_t r12;
151	uint64_t r13;
152	uint64_t r14;
153	uint64_t r15;
154	} Amd64;
155	} u;
156	} SUPDRVTRACERUSRCTX;
157	/** Pointer to the usermode probe context information. */
158	typedef SUPDRVTRACERUSRCTX *PSUPDRVTRACERUSRCTX;
159	/** Pointer to the const usermode probe context information. */
160	typedef SUPDRVTRACERUSRCTX const *PCSUPDRVTRACERUSRCTX;
161
162	/**
163	* The CPU state.
164	*/
165	typedef enum SUPGIPCPUSTATE
166	{
167	/** Invalid CPU state / unused CPU entry. */
168	SUPGIPCPUSTATE_INVALID = 0,
169	/** The CPU is not present. */
170	SUPGIPCPUSTATE_ABSENT,
171	/** The CPU is offline. */
172	SUPGIPCPUSTATE_OFFLINE,
173	/** The CPU is online. */
174	SUPGIPCPUSTATE_ONLINE,
175	/** Force 32-bit enum type. */
176	SUPGIPCPUSTATE_32_BIT_HACK = 0x7fffffff
177	} SUPGIPCPUSTATE;
178
179	/**
180	* Per CPU data.
181	*/
182	typedef struct SUPGIPCPU
183	{
184	/** Update transaction number.
185	* This number is incremented at the start and end of each update. It follows
186	* thusly that odd numbers indicates update in progress, while even numbers
187	* indicate stable data. Use this to make sure that the data items you fetch
188	* are consistent. */
189	volatile uint32_t u32TransactionId;
190	/** The interval in TSC ticks between two NanoTS updates.
191	* This is the average interval over the last 2, 4 or 8 updates + a little slack.
192	* The slack makes the time go a tiny tiny bit slower and extends the interval enough
193	* to avoid ending up with too many 1ns increments. */
194	volatile uint32_t u32UpdateIntervalTSC;
195	/** Current nanosecond timestamp. */
196	volatile uint64_t u64NanoTS;
197	/** The TSC at the time of u64NanoTS. */
198	volatile uint64_t u64TSC;
199	/** Current CPU Frequency. */
200	volatile uint64_t u64CpuHz;
201	/** Number of errors during updating.
202	* Typical errors are under/overflows. */
203	volatile uint32_t cErrors;
204	/** Index of the head item in au32TSCHistory. */
205	volatile uint32_t iTSCHistoryHead;
206	/** Array of recent TSC interval deltas.
207	* The most recent item is at index iTSCHistoryHead.
208	* This history is used to calculate u32UpdateIntervalTSC.
209	*/
210	volatile uint32_t au32TSCHistory[8];
211	/** The interval between the last two NanoTS updates. (experiment for now) */
212	volatile uint32_t u32PrevUpdateIntervalNS;
213
214	/** Reserved for future per processor data. */
215	volatile uint32_t au32Reserved[5+5];
216
217	/** @todo Add topology/NUMA info. */
218	/** The CPU state. */
219	SUPGIPCPUSTATE volatile enmState;
220	/** The host CPU ID of this CPU (the SUPGIPCPU is indexed by APIC ID). */
221	RTCPUID idCpu;
222	/** The CPU set index of this CPU. */
223	int16_t iCpuSet;
224	/** The APIC ID of this CPU. */
225	uint16_t idApic;
226	} SUPGIPCPU;
227	AssertCompileSize(RTCPUID, 4);
228	AssertCompileSize(SUPGIPCPU, 128);
229	AssertCompileMemberAlignment(SUPGIPCPU, u64NanoTS, 8);
230	AssertCompileMemberAlignment(SUPGIPCPU, u64TSC, 8);
231
232	/** Pointer to per cpu data.
233	* @remark there is no const version of this typedef, see g_pSUPGlobalInfoPage for details. */
234	typedef SUPGIPCPU *PSUPGIPCPU;
235
236
237
238	/**
239	* Global Information Page.
240	*
241	* This page contains useful information and can be mapped into any
242	* process or VM. It can be accessed thru the g_pSUPGlobalInfoPage
243	* pointer when a session is open.
244	*/
245	typedef struct SUPGLOBALINFOPAGE
246	{
247	/** Magic (SUPGLOBALINFOPAGE_MAGIC). */
248	uint32_t u32Magic;
249	/** The GIP version. */
250	uint32_t u32Version;
251
252	/** The GIP update mode, see SUPGIPMODE. */
253	uint32_t u32Mode;
254	/** The number of entries in the CPU table.
255	* (This can work as RTMpGetArraySize().) */
256	uint16_t cCpus;
257	/** The size of the GIP in pages. */
258	uint16_t cPages;
259	/** The update frequency of the of the NanoTS. */
260	volatile uint32_t u32UpdateHz;
261	/** The update interval in nanoseconds. (10^9 / u32UpdateHz) */
262	volatile uint32_t u32UpdateIntervalNS;
263	/** The timestamp of the last time we update the update frequency. */
264	volatile uint64_t u64NanoTSLastUpdateHz;
265	/** The set of online CPUs. */
266	RTCPUSET OnlineCpuSet;
267	/** The set of present CPUs. */
268	RTCPUSET PresentCpuSet;
269	/** The set of possible CPUs. */
270	RTCPUSET PossibleCpuSet;
271	/** The number of CPUs that are online. */
272	volatile uint16_t cOnlineCpus;
273	/** The number of CPUs present in the system. */
274	volatile uint16_t cPresentCpus;
275	/** The highest number of CPUs possible. */
276	uint16_t cPossibleCpus;
277	/** The highest number of CPUs possible. */
278	uint16_t u16Padding0;
279	/** The max CPU ID (RTMpGetMaxCpuId). */
280	RTCPUID idCpuMax;
281
282	/** Padding / reserved space for future data. */
283	uint32_t au32Padding1[29];
284
285	/** Table indexed by the CPU APIC ID to get the CPU table index. */
286	uint16_t aiCpuFromApicId[256];
287	/** CPU set index to CPU table index. */
288	uint16_t aiCpuFromCpuSetIdx[RTCPUSET_MAX_CPUS];
289
290	/** Array of per-cpu data.
291	* This is index by ApicId via the aiCpuFromApicId table.
292	*
293	* The clock and frequency information is updated for all CPUs if u32Mode
294	* is SUPGIPMODE_ASYNC_TSC, otherwise (SUPGIPMODE_SYNC_TSC) only the first
295	* entry is updated. */
296	SUPGIPCPU aCPUs[1];
297	} SUPGLOBALINFOPAGE;
298	AssertCompileMemberAlignment(SUPGLOBALINFOPAGE, u64NanoTSLastUpdateHz, 8);
299	#if defined(RT_ARCH_SPARC) \|\| defined(RT_ARCH_SPARC64)
300	AssertCompileMemberAlignment(SUPGLOBALINFOPAGE, aCPUs, 32);
301	#else
302	AssertCompileMemberAlignment(SUPGLOBALINFOPAGE, aCPUs, 256);
303	#endif
304
305	/** Pointer to the global info page.
306	* @remark there is no const version of this typedef, see g_pSUPGlobalInfoPage for details. */
307	typedef SUPGLOBALINFOPAGE *PSUPGLOBALINFOPAGE;
308
309
310	/** The value of the SUPGLOBALINFOPAGE::u32Magic field. (Soryo Fuyumi) */
311	#define SUPGLOBALINFOPAGE_MAGIC 0x19590106
312	/** The GIP version.
313	* Upper 16 bits is the major version. Major version is only changed with
314	* incompatible changes in the GIP. */
315	#define SUPGLOBALINFOPAGE_VERSION 0x00030000
316
317	/**
318	* SUPGLOBALINFOPAGE::u32Mode values.
319	*/
320	typedef enum SUPGIPMODE
321	{
322	/** The usual invalid null entry. */
323	SUPGIPMODE_INVALID = 0,
324	/** The TSC of the cores and cpus in the system is in sync. */
325	SUPGIPMODE_SYNC_TSC,
326	/** Each core has it's own TSC. */
327	SUPGIPMODE_ASYNC_TSC,
328	/** The usual 32-bit hack. */
329	SUPGIPMODE_32BIT_HACK = 0x7fffffff
330	} SUPGIPMODE;
331
332	/** Pointer to the Global Information Page.
333	*
334	* This pointer is valid as long as SUPLib has a open session. Anyone using
335	* the page must treat this pointer as highly volatile and not trust it beyond
336	* one transaction.
337	*
338	* @remark The GIP page is read-only to everyone but the support driver and
339	* is actually mapped read only everywhere but in ring-0. However
340	* it is not marked 'const' as this might confuse compilers into
341	* thinking that values doesn't change even if members are marked
342	* as volatile. Thus, there is no PCSUPGLOBALINFOPAGE type.
343	*/
344	#if defined(IN_SUP_R0) \|\| defined(IN_SUP_R3) \|\| defined(IN_SUP_RC)
345	extern DECLEXPORT(PSUPGLOBALINFOPAGE) g_pSUPGlobalInfoPage;
346
347	#elif !defined(IN_RING0) \|\| defined(RT_OS_WINDOWS) \|\| defined(RT_OS_SOLARIS)
348	extern DECLIMPORT(PSUPGLOBALINFOPAGE) g_pSUPGlobalInfoPage;
349
350	#else /* IN_RING0 && !RT_OS_WINDOWS */
351	# if !defined(__GNUC__) \|\| defined(RT_OS_DARWIN) \|\| !defined(RT_ARCH_AMD64)
352	# define g_pSUPGlobalInfoPage (&g_SUPGlobalInfoPage)
353	# else
354	# define g_pSUPGlobalInfoPage (SUPGetGIPHlp())
355	/** Workaround for ELF+GCC problem on 64-bit hosts.
356	* (GCC emits a mov with a R_X86_64_32 reloc, we need R_X86_64_64.) */
357	DECLINLINE(PSUPGLOBALINFOPAGE) SUPGetGIPHlp(void)
358	{
359	PSUPGLOBALINFOPAGE pGIP;
360	__asm__ __volatile__ ("movabs $g_SUPGlobalInfoPage,%0\n\t"
361	: "=a" (pGIP));
362	return pGIP;
363	}
364	# endif
365	/** The GIP.
366	* We save a level of indirection by exporting the GIP instead of a variable
367	* pointing to it. */
368	extern DECLIMPORT(SUPGLOBALINFOPAGE) g_SUPGlobalInfoPage;
369	#endif
370
371	/**
372	* Gets the GIP pointer.
373	*
374	* @returns Pointer to the GIP or NULL.
375	*/
376	SUPDECL(PSUPGLOBALINFOPAGE) SUPGetGIP(void);
377
378	#ifdef ___iprt_asm_amd64_x86_h
379	/**
380	* Gets the TSC frequency of the calling CPU.
381	*
382	* @returns TSC frequency, UINT64_MAX on failure.
383	* @param pGip The GIP pointer.
384	*/
385	DECLINLINE(uint64_t) SUPGetCpuHzFromGIP(PSUPGLOBALINFOPAGE pGip)
386	{
387	unsigned iCpu;
388
389	if (RT_UNLIKELY(!pGip \|\| pGip->u32Magic != SUPGLOBALINFOPAGE_MAGIC))
390	return UINT64_MAX;
391
392	if (pGip->u32Mode != SUPGIPMODE_ASYNC_TSC)
393	iCpu = 0;
394	else
395	{
396	iCpu = pGip->aiCpuFromApicId[ASMGetApicId()];
397	if (iCpu >= pGip->cCpus)
398	return UINT64_MAX;
399	}
400
401	return pGip->aCPUs[iCpu].u64CpuHz;
402	}
403	#endif
404
405	/**
406	* Request for generic VMMR0Entry calls.
407	*/
408	typedef struct SUPVMMR0REQHDR
409	{
410	/** The magic. (SUPVMMR0REQHDR_MAGIC) */
411	uint32_t u32Magic;
412	/** The size of the request. */
413	uint32_t cbReq;
414	} SUPVMMR0REQHDR;
415	/** Pointer to a ring-0 request header. */
416	typedef SUPVMMR0REQHDR *PSUPVMMR0REQHDR;
417	/** the SUPVMMR0REQHDR::u32Magic value (Ethan Iverson - The Bad Plus). */
418	#define SUPVMMR0REQHDR_MAGIC UINT32_C(0x19730211)
419
420
421	/** For the fast ioctl path.
422	* @{
423	*/
424	/** @see VMMR0_DO_RAW_RUN. */
425	#define SUP_VMMR0_DO_RAW_RUN 0
426	/** @see VMMR0_DO_HM_RUN. */
427	#define SUP_VMMR0_DO_HM_RUN 1
428	/** @see VMMR0_DO_NOP */
429	#define SUP_VMMR0_DO_NOP 2
430	/** @} */
431
432	/** SUPR3QueryVTCaps capability flags
433	* @{
434	*/
435	#define SUPVTCAPS_AMD_V RT_BIT(0)
436	#define SUPVTCAPS_VT_X RT_BIT(1)
437	#define SUPVTCAPS_NESTED_PAGING RT_BIT(2)
438	/** @} */
439
440	/**
441	* Request for generic FNSUPR0SERVICEREQHANDLER calls.
442	*/
443	typedef struct SUPR0SERVICEREQHDR
444	{
445	/** The magic. (SUPR0SERVICEREQHDR_MAGIC) */
446	uint32_t u32Magic;
447	/** The size of the request. */
448	uint32_t cbReq;
449	} SUPR0SERVICEREQHDR;
450	/** Pointer to a ring-0 service request header. */
451	typedef SUPR0SERVICEREQHDR *PSUPR0SERVICEREQHDR;
452	/** the SUPVMMR0REQHDR::u32Magic value (Esbjoern Svensson - E.S.P.). */
453	#define SUPR0SERVICEREQHDR_MAGIC UINT32_C(0x19640416)
454
455
456	/** Event semaphore handle. Ring-0 / ring-3. */
457	typedef R0PTRTYPE(struct SUPSEMEVENTHANDLE *) SUPSEMEVENT;
458	/** Pointer to an event semaphore handle. */
459	typedef SUPSEMEVENT *PSUPSEMEVENT;
460	/** Nil event semaphore handle. */
461	#define NIL_SUPSEMEVENT ((SUPSEMEVENT)0)
462
463	/**
464	* Creates a single release event semaphore.
465	*
466	* @returns VBox status code.
467	* @param pSession The session handle of the caller.
468	* @param phEvent Where to return the handle to the event semaphore.
469	*/
470	SUPDECL(int) SUPSemEventCreate(PSUPDRVSESSION pSession, PSUPSEMEVENT phEvent);
471
472	/**
473	* Closes a single release event semaphore handle.
474	*
475	* @returns VBox status code.
476	* @retval VINF_OBJECT_DESTROYED if the semaphore was destroyed.
477	* @retval VINF_SUCCESS if the handle was successfully closed but the semaphore
478	* object remained alive because of other references.
479	*
480	* @param pSession The session handle of the caller.
481	* @param hEvent The handle. Nil is quietly ignored.
482	*/
483	SUPDECL(int) SUPSemEventClose(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent);
484
485	/**
486	* Signals a single release event semaphore.
487	*
488	* @returns VBox status code.
489	* @param pSession The session handle of the caller.
490	* @param hEvent The semaphore handle.
491	*/
492	SUPDECL(int) SUPSemEventSignal(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent);
493
494	#ifdef IN_RING0
495	/**
496	* Waits on a single release event semaphore, not interruptible.
497	*
498	* @returns VBox status code.
499	* @param pSession The session handle of the caller.
500	* @param hEvent The semaphore handle.
501	* @param cMillies The number of milliseconds to wait.
502	* @remarks Not available in ring-3.
503	*/
504	SUPDECL(int) SUPSemEventWait(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent, uint32_t cMillies);
505	#endif
506
507	/**
508	* Waits on a single release event semaphore, interruptible.
509	*
510	* @returns VBox status code.
511	* @param pSession The session handle of the caller.
512	* @param hEvent The semaphore handle.
513	* @param cMillies The number of milliseconds to wait.
514	*/
515	SUPDECL(int) SUPSemEventWaitNoResume(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent, uint32_t cMillies);
516
517	/**
518	* Waits on a single release event semaphore, interruptible.
519	*
520	* @returns VBox status code.
521	* @param pSession The session handle of the caller.
522	* @param hEvent The semaphore handle.
523	* @param uNsTimeout The deadline given on the RTTimeNanoTS() clock.
524	*/
525	SUPDECL(int) SUPSemEventWaitNsAbsIntr(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent, uint64_t uNsTimeout);
526
527	/**
528	* Waits on a single release event semaphore, interruptible.
529	*
530	* @returns VBox status code.
531	* @param pSession The session handle of the caller.
532	* @param hEvent The semaphore handle.
533	* @param cNsTimeout The number of nanoseconds to wait.
534	*/
535	SUPDECL(int) SUPSemEventWaitNsRelIntr(PSUPDRVSESSION pSession, SUPSEMEVENT hEvent, uint64_t cNsTimeout);
536
537	/**
538	* Gets the best timeout resolution that SUPSemEventWaitNsAbsIntr and
539	* SUPSemEventWaitNsAbsIntr can do.
540	*
541	* @returns The resolution in nanoseconds.
542	* @param pSession The session handle of the caller.
543	*/
544	SUPDECL(uint32_t) SUPSemEventGetResolution(PSUPDRVSESSION pSession);
545
546
547	/** Multiple release event semaphore handle. Ring-0 / ring-3. */
548	typedef R0PTRTYPE(struct SUPSEMEVENTMULTIHANDLE *) SUPSEMEVENTMULTI;
549	/** Pointer to an multiple release event semaphore handle. */
550	typedef SUPSEMEVENTMULTI *PSUPSEMEVENTMULTI;
551	/** Nil multiple release event semaphore handle. */
552	#define NIL_SUPSEMEVENTMULTI ((SUPSEMEVENTMULTI)0)
553
554	/**
555	* Creates a multiple release event semaphore.
556	*
557	* @returns VBox status code.
558	* @param pSession The session handle of the caller.
559	* @param phEventMulti Where to return the handle to the event semaphore.
560	*/
561	SUPDECL(int) SUPSemEventMultiCreate(PSUPDRVSESSION pSession, PSUPSEMEVENTMULTI phEventMulti);
562
563	/**
564	* Closes a multiple release event semaphore handle.
565	*
566	* @returns VBox status code.
567	* @retval VINF_OBJECT_DESTROYED if the semaphore was destroyed.
568	* @retval VINF_SUCCESS if the handle was successfully closed but the semaphore
569	* object remained alive because of other references.
570	*
571	* @param pSession The session handle of the caller.
572	* @param hEventMulti The handle. Nil is quietly ignored.
573	*/
574	SUPDECL(int) SUPSemEventMultiClose(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti);
575
576	/**
577	* Signals a multiple release event semaphore.
578	*
579	* @returns VBox status code.
580	* @param pSession The session handle of the caller.
581	* @param hEventMulti The semaphore handle.
582	*/
583	SUPDECL(int) SUPSemEventMultiSignal(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti);
584
585	/**
586	* Resets a multiple release event semaphore.
587	*
588	* @returns VBox status code.
589	* @param pSession The session handle of the caller.
590	* @param hEventMulti The semaphore handle.
591	*/
592	SUPDECL(int) SUPSemEventMultiReset(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti);
593
594	#ifdef IN_RING0
595	/**
596	* Waits on a multiple release event semaphore, not interruptible.
597	*
598	* @returns VBox status code.
599	* @param pSession The session handle of the caller.
600	* @param hEventMulti The semaphore handle.
601	* @param cMillies The number of milliseconds to wait.
602	* @remarks Not available in ring-3.
603	*/
604	SUPDECL(int) SUPSemEventMultiWait(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti, uint32_t cMillies);
605	#endif
606
607	/**
608	* Waits on a multiple release event semaphore, interruptible.
609	*
610	* @returns VBox status code.
611	* @param pSession The session handle of the caller.
612	* @param hEventMulti The semaphore handle.
613	* @param cMillies The number of milliseconds to wait.
614	*/
615	SUPDECL(int) SUPSemEventMultiWaitNoResume(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti, uint32_t cMillies);
616
617	/**
618	* Waits on a multiple release event semaphore, interruptible.
619	*
620	* @returns VBox status code.
621	* @param pSession The session handle of the caller.
622	* @param hEventMulti The semaphore handle.
623	* @param uNsTimeout The deadline given on the RTTimeNanoTS() clock.
624	*/
625	SUPDECL(int) SUPSemEventMultiWaitNsAbsIntr(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti, uint64_t uNsTimeout);
626
627	/**
628	* Waits on a multiple release event semaphore, interruptible.
629	*
630	* @returns VBox status code.
631	* @param pSession The session handle of the caller.
632	* @param hEventMulti The semaphore handle.
633	* @param cNsTimeout The number of nanoseconds to wait.
634	*/
635	SUPDECL(int) SUPSemEventMultiWaitNsRelIntr(PSUPDRVSESSION pSession, SUPSEMEVENTMULTI hEventMulti, uint64_t cNsTimeout);
636
637	/**
638	* Gets the best timeout resolution that SUPSemEventMultiWaitNsAbsIntr and
639	* SUPSemEventMultiWaitNsRelIntr can do.
640	*
641	* @returns The resolution in nanoseconds.
642	* @param pSession The session handle of the caller.
643	*/
644	SUPDECL(uint32_t) SUPSemEventMultiGetResolution(PSUPDRVSESSION pSession);
645
646
647	#ifdef IN_RING3
648
649	/** @defgroup grp_sup_r3 SUP Host Context Ring-3 API
650	* @ingroup grp_sup
651	* @{
652	*/
653
654	/**
655	* Installs the support library.
656	*
657	* @returns VBox status code.
658	*/
659	SUPR3DECL(int) SUPR3Install(void);
660
661	/**
662	* Uninstalls the support library.
663	*
664	* @returns VBox status code.
665	*/
666	SUPR3DECL(int) SUPR3Uninstall(void);
667
668	/**
669	* Trusted main entry point.
670	*
671	* This is exported as "TrustedMain" by the dynamic libraries which contains the
672	* "real" application binary for which the hardened stub is built. The entry
673	* point is invoked upon successful initialization of the support library and
674	* runtime.
675	*
676	* @returns main kind of exit code.
677	* @param argc The argument count.
678	* @param argv The argument vector.
679	* @param envp The environment vector.
680	*/
681	typedef DECLCALLBACK(int) FNSUPTRUSTEDMAIN(int argc, char argv, char envp);
682	/** Pointer to FNSUPTRUSTEDMAIN(). */
683	typedef FNSUPTRUSTEDMAIN *PFNSUPTRUSTEDMAIN;
684
685	/** Which operation failed. */
686	typedef enum SUPINITOP
687	{
688	/** Invalid. */
689	kSupInitOp_Invalid = 0,
690	/** Installation integrity error. */
691	kSupInitOp_Integrity,
692	/** Setuid related. */
693	kSupInitOp_RootCheck,
694	/** Driver related. */
695	kSupInitOp_Driver,
696	/** IPRT init related. */
697	kSupInitOp_IPRT,
698	/** Place holder. */
699	kSupInitOp_End
700	} SUPINITOP;
701
702	/**
703	* Trusted error entry point, optional.
704	*
705	* This is exported as "TrustedError" by the dynamic libraries which contains
706	* the "real" application binary for which the hardened stub is built.
707	*
708	* @param pszWhere Where the error occurred (function name).
709	* @param enmWhat Which operation went wrong.
710	* @param rc The status code.
711	* @param pszMsgFmt Error message format string.
712	* @param va The message format arguments.
713	*/
714	typedef DECLCALLBACK(void) FNSUPTRUSTEDERROR(const char pszWhere, SUPINITOP enmWhat, int rc, const char pszMsgFmt, va_list va);
715	/** Pointer to FNSUPTRUSTEDERROR. */
716	typedef FNSUPTRUSTEDERROR *PFNSUPTRUSTEDERROR;
717
718	/**
719	* Secure main.
720	*
721	* This is used for the set-user-ID-on-execute binaries on unixy systems
722	* and when using the open-vboxdrv-via-root-service setup on Windows.
723	*
724	* This function will perform the integrity checks of the VirtualBox
725	* installation, open the support driver, open the root service (later),
726	* and load the DLL corresponding to \a pszProgName and execute its main
727	* function.
728	*
729	* @returns Return code appropriate for main().
730	*
731	* @param pszProgName The program name. This will be used to figure out which
732	* DLL/SO/DYLIB to load and execute.
733	* @param fFlags Flags.
734	* @param argc The argument count.
735	* @param argv The argument vector.
736	* @param envp The environment vector.
737	*/
738	DECLHIDDEN(int) SUPR3HardenedMain(const char pszProgName, uint32_t fFlags, int argc, char argv, char *envp);
739
740	/** @name SUPR3SecureMain flags.
741	* @{ */
742	/** Don't open the device. (Intended for VirtualBox without -startvm.) */
743	#define SUPSECMAIN_FLAGS_DONT_OPEN_DEV RT_BIT_32(0)
744	/** @} */
745
746	/**
747	* Initializes the support library.
748	*
749	* Each successful call to SUPR3Init() or SUPR3InitEx must be countered by a
750	* call to SUPR3Term(false).
751	*
752	* @returns VBox status code.
753	* @param ppSession Where to store the session handle. Defaults to NULL.
754	*/
755	SUPR3DECL(int) SUPR3Init(PSUPDRVSESSION *ppSession);
756
757
758	/**
759	* Initializes the support library, extended version.
760	*
761	* Each successful call to SUPR3Init() or SUPR3InitEx must be countered by a
762	* call to SUPR3Term(false).
763	*
764	* @returns VBox status code.
765	* @param fUnrestricted The desired access.
766	* @param ppSession Where to store the session handle. Defaults to NULL.
767	*/
768	SUPR3DECL(int) SUPR3InitEx(bool fUnrestricted, PSUPDRVSESSION *ppSession);
769
770	/**
771	* Terminates the support library.
772	*
773	* @returns VBox status code.
774	* @param fForced Forced termination. This means to ignore the
775	* init call count and just terminated.
776	*/
777	#ifdef __cplusplus
778	SUPR3DECL(int) SUPR3Term(bool fForced = false);
779	#else
780	SUPR3DECL(int) SUPR3Term(int fForced);
781	#endif
782
783	/**
784	* Sets the ring-0 VM handle for use with fast IOCtls.
785	*
786	* @returns VBox status code.
787	* @param pVMR0 The ring-0 VM handle.
788	* NIL_RTR0PTR can be used to unset the handle when the
789	* VM is about to be destroyed.
790	*/
791	SUPR3DECL(int) SUPR3SetVMForFastIOCtl(PVMR0 pVMR0);
792
793	/**
794	* Calls the HC R0 VMM entry point.
795	* See VMMR0Entry() for more details.
796	*
797	* @returns error code specific to uFunction.
798	* @param pVMR0 Pointer to the Ring-0 (Host Context) mapping of the VM structure.
799	* @param idCpu The virtual CPU ID.
800	* @param uOperation Operation to execute.
801	* @param pvArg Argument.
802	*/
803	SUPR3DECL(int) SUPR3CallVMMR0(PVMR0 pVMR0, VMCPUID idCpu, unsigned uOperation, void *pvArg);
804
805	/**
806	* Variant of SUPR3CallVMMR0, except that this takes the fast ioclt path
807	* regardsless of compile-time defaults.
808	*
809	* @returns VBox status code.
810	* @param pVMR0 The ring-0 VM handle.
811	* @param uOperation The operation; only the SUP_VMMR0_DO_* ones are valid.
812	* @param idCpu The virtual CPU ID.
813	*/
814	SUPR3DECL(int) SUPR3CallVMMR0Fast(PVMR0 pVMR0, unsigned uOperation, VMCPUID idCpu);
815
816	/**
817	* Calls the HC R0 VMM entry point, in a safer but slower manner than
818	* SUPR3CallVMMR0. When entering using this call the R0 components can call
819	* into the host kernel (i.e. use the SUPR0 and RT APIs).
820	*
821	* See VMMR0Entry() for more details.
822	*
823	* @returns error code specific to uFunction.
824	* @param pVMR0 Pointer to the Ring-0 (Host Context) mapping of the VM structure.
825	* @param idCpu The virtual CPU ID.
826	* @param uOperation Operation to execute.
827	* @param u64Arg Constant argument.
828	* @param pReqHdr Pointer to a request header. Optional.
829	* This will be copied in and out of kernel space. There currently is a size
830	* limit on this, just below 4KB.
831	*/
832	SUPR3DECL(int) SUPR3CallVMMR0Ex(PVMR0 pVMR0, VMCPUID idCpu, unsigned uOperation, uint64_t u64Arg, PSUPVMMR0REQHDR pReqHdr);
833
834	/**
835	* Calls a ring-0 service.
836	*
837	* The operation and the request packet is specific to the service.
838	*
839	* @returns error code specific to uFunction.
840	* @param pszService The service name.
841	* @param cchService The length of the service name.
842	* @param uReq The request number.
843	* @param u64Arg Constant argument.
844	* @param pReqHdr Pointer to a request header. Optional.
845	* This will be copied in and out of kernel space. There currently is a size
846	* limit on this, just below 4KB.
847	*/
848	SUPR3DECL(int) SUPR3CallR0Service(const char *pszService, size_t cchService, uint32_t uOperation, uint64_t u64Arg, PSUPR0SERVICEREQHDR pReqHdr);
849
850	/** Which logger. */
851	typedef enum SUPLOGGER
852	{
853	SUPLOGGER_DEBUG = 1,
854	SUPLOGGER_RELEASE
855	} SUPLOGGER;
856
857	/**
858	* Changes the settings of the specified ring-0 logger.
859	*
860	* @returns VBox status code.
861	* @param enmWhich Which logger.
862	* @param pszFlags The flags settings.
863	* @param pszGroups The groups settings.
864	* @param pszDest The destination specificier.
865	*/
866	SUPR3DECL(int) SUPR3LoggerSettings(SUPLOGGER enmWhich, const char pszFlags, const char pszGroups, const char *pszDest);
867
868	/**
869	* Creates a ring-0 logger instance.
870	*
871	* @returns VBox status code.
872	* @param enmWhich Which logger to create.
873	* @param pszFlags The flags settings.
874	* @param pszGroups The groups settings.
875	* @param pszDest The destination specificier.
876	*/
877	SUPR3DECL(int) SUPR3LoggerCreate(SUPLOGGER enmWhich, const char pszFlags, const char pszGroups, const char *pszDest);
878
879	/**
880	* Destroys a ring-0 logger instance.
881	*
882	* @returns VBox status code.
883	* @param enmWhich Which logger.
884	*/
885	SUPR3DECL(int) SUPR3LoggerDestroy(SUPLOGGER enmWhich);
886
887	/**
888	* Queries the paging mode of the host OS.
889	*
890	* @returns The paging mode.
891	*/
892	SUPR3DECL(SUPPAGINGMODE) SUPR3GetPagingMode(void);
893
894	/**
895	* Allocate zero-filled pages.
896	*
897	* Use this to allocate a number of pages suitable for seeding / locking.
898	* Call SUPR3PageFree() to free the pages once done with them.
899	*
900	* @returns VBox status.
901	* @param cPages Number of pages to allocate.
902	* @param ppvPages Where to store the base pointer to the allocated pages.
903	*/
904	SUPR3DECL(int) SUPR3PageAlloc(size_t cPages, void **ppvPages);
905
906	/**
907	* Frees pages allocated with SUPR3PageAlloc().
908	*
909	* @returns VBox status.
910	* @param pvPages Pointer returned by SUPR3PageAlloc().
911	* @param cPages Number of pages that was allocated.
912	*/
913	SUPR3DECL(int) SUPR3PageFree(void *pvPages, size_t cPages);
914
915	/**
916	* Allocate non-zeroed, locked, pages with user and, optionally, kernel
917	* mappings.
918	*
919	* Use SUPR3PageFreeEx() to free memory allocated with this function.
920	*
921	* @returns VBox status code.
922	* @param cPages The number of pages to allocate.
923	* @param fFlags Flags, reserved. Must be zero.
924	* @param ppvPages Where to store the address of the user mapping.
925	* @param pR0Ptr Where to store the address of the kernel mapping.
926	* NULL if no kernel mapping is desired.
927	* @param paPages Where to store the physical addresses of each page.
928	* Optional.
929	*/
930	SUPR3DECL(int) SUPR3PageAllocEx(size_t cPages, uint32_t fFlags, void **ppvPages, PRTR0PTR pR0Ptr, PSUPPAGE paPages);
931
932	/**
933	* Maps a portion of a ring-3 only allocation into kernel space.
934	*
935	* @returns VBox status code.
936	*
937	* @param pvR3 The address SUPR3PageAllocEx return.
938	* @param off Offset to start mapping at. Must be page aligned.
939	* @param cb Number of bytes to map. Must be page aligned.
940	* @param fFlags Flags, must be zero.
941	* @param pR0Ptr Where to store the address on success.
942	*
943	*/
944	SUPR3DECL(int) SUPR3PageMapKernel(void *pvR3, uint32_t off, uint32_t cb, uint32_t fFlags, PRTR0PTR pR0Ptr);
945
946	/**
947	* Changes the protection of
948	*
949	* @returns VBox status code.
950	* @retval VERR_NOT_SUPPORTED if the OS doesn't allow us to change page level
951	* protection. See also RTR0MemObjProtect.
952	*
953	* @param pvR3 The ring-3 address SUPR3PageAllocEx returned.
954	* @param R0Ptr The ring-0 address SUPR3PageAllocEx returned if it
955	* is desired that the corresponding ring-0 page
956	* mappings should change protection as well. Pass
957	* NIL_RTR0PTR if the ring-0 pages should remain
958	* unaffected.
959	* @param off Offset to start at which to start chagning the page
960	* level protection. Must be page aligned.
961	* @param cb Number of bytes to change. Must be page aligned.
962	* @param fProt The new page level protection, either a combination
963	* of RTMEM_PROT_READ, RTMEM_PROT_WRITE and
964	* RTMEM_PROT_EXEC, or just RTMEM_PROT_NONE.
965	*/
966	SUPR3DECL(int) SUPR3PageProtect(void *pvR3, RTR0PTR R0Ptr, uint32_t off, uint32_t cb, uint32_t fProt);
967
968	/**
969	* Free pages allocated by SUPR3PageAllocEx.
970	*
971	* @returns VBox status code.
972	* @param pvPages The address of the user mapping.
973	* @param cPages The number of pages.
974	*/
975	SUPR3DECL(int) SUPR3PageFreeEx(void *pvPages, size_t cPages);
976
977	/**
978	* Allocated memory with page aligned memory with a contiguous and locked physical
979	* memory backing below 4GB.
980	*
981	* @returns Pointer to the allocated memory (virtual address).
982	* *pHCPhys is set to the physical address of the memory.
983	* If ppvR0 isn't NULL, *ppvR0 is set to the ring-0 mapping.
984	* The returned memory must be freed using SUPR3ContFree().
985	* @returns NULL on failure.
986	* @param cPages Number of pages to allocate.
987	* @param pR0Ptr Where to store the ring-0 mapping of the allocation. (optional)
988	* @param pHCPhys Where to store the physical address of the memory block.
989	*
990	* @remark This 2nd version of this API exists because we're not able to map the
991	* ring-3 mapping executable on WIN64. This is a serious problem in regard to
992	* the world switchers.
993	*/
994	SUPR3DECL(void *) SUPR3ContAlloc(size_t cPages, PRTR0PTR pR0Ptr, PRTHCPHYS pHCPhys);
995
996	/**
997	* Frees memory allocated with SUPR3ContAlloc().
998	*
999	* @returns VBox status code.
1000	* @param pv Pointer to the memory block which should be freed.
1001	* @param cPages Number of pages to be freed.
1002	*/
1003	SUPR3DECL(int) SUPR3ContFree(void *pv, size_t cPages);
1004
1005	/**
1006	* Allocated non contiguous physical memory below 4GB.
1007	*
1008	* The memory isn't zeroed.
1009	*
1010	* @returns VBox status code.
1011	* @returns NULL on failure.
1012	* @param cPages Number of pages to allocate.
1013	* @param ppvPages Where to store the pointer to the allocated memory.
1014	* The pointer stored here on success must be passed to
1015	* SUPR3LowFree when the memory should be released.
1016	* @param ppvPagesR0 Where to store the ring-0 pointer to the allocated memory. optional.
1017	* @param paPages Where to store the physical addresses of the individual pages.
1018	*/
1019	SUPR3DECL(int) SUPR3LowAlloc(size_t cPages, void **ppvPages, PRTR0PTR ppvPagesR0, PSUPPAGE paPages);
1020
1021	/**
1022	* Frees memory allocated with SUPR3LowAlloc().
1023	*
1024	* @returns VBox status code.
1025	* @param pv Pointer to the memory block which should be freed.
1026	* @param cPages Number of pages that was allocated.
1027	*/
1028	SUPR3DECL(int) SUPR3LowFree(void *pv, size_t cPages);
1029
1030	/**
1031	* Load a module into R0 HC.
1032	*
1033	* This will verify the file integrity in a similar manner as
1034	* SUPR3HardenedVerifyFile before loading it.
1035	*
1036	* @returns VBox status code.
1037	* @param pszFilename The path to the image file.
1038	* @param pszModule The module name. Max 32 bytes.
1039	* @param ppvImageBase Where to store the image address.
1040	* @param pErrInfo Where to return extended error information.
1041	* Optional.
1042	*/
1043	SUPR3DECL(int) SUPR3LoadModule(const char pszFilename, const char pszModule, void **ppvImageBase, PRTERRINFO pErrInfo);
1044
1045	/**
1046	* Load a module into R0 HC.
1047	*
1048	* This will verify the file integrity in a similar manner as
1049	* SUPR3HardenedVerifyFile before loading it.
1050	*
1051	* @returns VBox status code.
1052	* @param pszFilename The path to the image file.
1053	* @param pszModule The module name. Max 32 bytes.
1054	* @param pszSrvReqHandler The name of the service request handler entry
1055	* point. See FNSUPR0SERVICEREQHANDLER.
1056	* @param ppvImageBase Where to store the image address.
1057	*/
1058	SUPR3DECL(int) SUPR3LoadServiceModule(const char pszFilename, const char pszModule,
1059	const char pszSrvReqHandler, void *ppvImageBase);
1060
1061	/**
1062	* Frees a R0 HC module.
1063	*
1064	* @returns VBox status code.
1065	* @param pszModule The module to free.
1066	* @remark This will not actually 'free' the module, there are of course usage counting.
1067	*/
1068	SUPR3DECL(int) SUPR3FreeModule(void *pvImageBase);
1069
1070	/**
1071	* Get the address of a symbol in a ring-0 module.
1072	*
1073	* @returns VBox status code.
1074	* @param pszModule The module name.
1075	* @param pszSymbol Symbol name. If it's value is less than 64k it's treated like a
1076	* ordinal value rather than a string pointer.
1077	* @param ppvValue Where to store the symbol value.
1078	*/
1079	SUPR3DECL(int) SUPR3GetSymbolR0(void pvImageBase, const char pszSymbol, void **ppvValue);
1080
1081	/**
1082	* Load R0 HC VMM code.
1083	*
1084	* @returns VBox status code.
1085	* @deprecated Use SUPR3LoadModule(pszFilename, "VMMR0.r0", &pvImageBase)
1086	*/
1087	SUPR3DECL(int) SUPR3LoadVMM(const char *pszFilename);
1088
1089	/**
1090	* Unloads R0 HC VMM code.
1091	*
1092	* @returns VBox status code.
1093	* @deprecated Use SUPR3FreeModule().
1094	*/
1095	SUPR3DECL(int) SUPR3UnloadVMM(void);
1096
1097	/**
1098	* Get the physical address of the GIP.
1099	*
1100	* @returns VBox status code.
1101	* @param pHCPhys Where to store the physical address of the GIP.
1102	*/
1103	SUPR3DECL(int) SUPR3GipGetPhys(PRTHCPHYS pHCPhys);
1104
1105	/**
1106	* Verifies the integrity of a file, and optionally opens it.
1107	*
1108	* The integrity check is for whether the file is suitable for loading into
1109	* the hypervisor or VM process. The integrity check may include verifying
1110	* the authenticode/elfsign/whatever signature of the file, which can take
1111	* a little while.
1112	*
1113	* @returns VBox status code. On failure it will have printed a LogRel message.
1114	*
1115	* @param pszFilename The file.
1116	* @param pszWhat For the LogRel on failure.
1117	* @param phFile Where to store the handle to the opened file. This is optional, pass NULL
1118	* if the file should not be opened.
1119	* @deprecated Write a new one.
1120	*/
1121	SUPR3DECL(int) SUPR3HardenedVerifyFile(const char pszFilename, const char pszWhat, PRTFILE phFile);
1122
1123	/**
1124	* Verifies the integrity of a the current process, including the image
1125	* location and that the invocation was absolute.
1126	*
1127	* This must currently be called after initializing the runtime. The intended
1128	* audience is set-uid-to-root applications, root services and similar.
1129	*
1130	* @returns VBox status code. On failure
1131	* message.
1132	* @param pszArgv0 The first argument to main().
1133	* @param fInternal Set this to @c true if this is an internal
1134	* VirtualBox application. Otherwise pass @c false.
1135	* @param pErrInfo Where to return extended error information.
1136	*/
1137	SUPR3DECL(int) SUPR3HardenedVerifySelf(const char *pszArgv0, bool fInternal, PRTERRINFO pErrInfo);
1138
1139	/**
1140	* Verifies the integrity of an installation directory.
1141	*
1142	* The integrity check verifies that the directory cannot be tampered with by
1143	* normal users on the system. On Unix this translates to root ownership and
1144	* no symbolic linking.
1145	*
1146	* @returns VBox status code. On failure a message will be stored in @a pszErr.
1147	*
1148	* @param pszDirPath The directory path.
1149	* @param fRecursive Whether the check should be recursive or
1150	* not. When set, all sub-directores will be checked,
1151	* including files (@a fCheckFiles is ignored).
1152	* @param fCheckFiles Whether to apply the same basic integrity check to
1153	* the files in the directory as the directory itself.
1154	* @param pErrInfo Where to return extended error information.
1155	* Optional.
1156	*/
1157	SUPR3DECL(int) SUPR3HardenedVerifyDir(const char *pszDirPath, bool fRecursive, bool fCheckFiles, PRTERRINFO pErrInfo);
1158
1159	/**
1160	* Verifies the integrity of a plug-in module.
1161	*
1162	* This is similar to SUPR3HardenedLdrLoad, except it does not load the module
1163	* and that the module does not have to be shipped with VirtualBox.
1164	*
1165	* @returns VBox status code. On failure a message will be stored in @a pszErr.
1166	*
1167	* @param pszFilename The filename of the plug-in module (nothing can be
1168	* omitted here).
1169	* @param pErrInfo Where to return extended error information.
1170	* Optional.
1171	*/
1172	SUPR3DECL(int) SUPR3HardenedVerifyPlugIn(const char *pszFilename, PRTERRINFO pErrInfo);
1173
1174	/**
1175	* Same as RTLdrLoad() but will verify the files it loads (hardened builds).
1176	*
1177	* Will add dll suffix if missing and try load the file.
1178	*
1179	* @returns iprt status code.
1180	* @param pszFilename Image filename. This must have a path.
1181	* @param phLdrMod Where to store the handle to the loaded module.
1182	* @param fFlags See RTLDRLOAD_FLAGS_XXX.
1183	* @param pErrInfo Where to return extended error information.
1184	* Optional.
1185	*/
1186	SUPR3DECL(int) SUPR3HardenedLdrLoad(const char *pszFilename, PRTLDRMOD phLdrMod, uint32_t fFlags, PRTERRINFO pErrInfo);
1187
1188	/**
1189	* Same as RTLdrLoadAppPriv() but it will verify the files it loads (hardened
1190	* builds).
1191	*
1192	* Will add dll suffix to the file if missing, then look for it in the
1193	* architecture dependent application directory.
1194	*
1195	* @returns iprt status code.
1196	* @param pszFilename Image filename.
1197	* @param phLdrMod Where to store the handle to the loaded module.
1198	* @param fFlags See RTLDRLOAD_FLAGS_XXX.
1199	* @param pErrInfo Where to return extended error information.
1200	* Optional.
1201	*/
1202	SUPR3DECL(int) SUPR3HardenedLdrLoadAppPriv(const char *pszFilename, PRTLDRMOD phLdrMod, uint32_t fFlags, PRTERRINFO pErrInfo);
1203
1204	/**
1205	* Same as RTLdrLoad() but will verify the files it loads (hardened builds).
1206	*
1207	* This differs from SUPR3HardenedLdrLoad() in that it can load modules from
1208	* extension packs and anything else safely installed on the system, provided
1209	* they pass the hardening tests.
1210	*
1211	* @returns iprt status code.
1212	* @param pszFilename The full path to the module, with extension.
1213	* @param phLdrMod Where to store the handle to the loaded module.
1214	* @param pErrInfo Where to return extended error information.
1215	* Optional.
1216	*/
1217	SUPR3DECL(int) SUPR3HardenedLdrLoadPlugIn(const char *pszFilename, PRTLDRMOD phLdrMod, PRTERRINFO pErrInfo);
1218
1219	/**
1220	* Check if the host kernel can run in VMX root mode.
1221	*
1222	* @returns VINF_SUCCESS if supported, error code indicating why if not.
1223	*/
1224	SUPR3DECL(int) SUPR3QueryVTxSupported(void);
1225
1226	/**
1227	* Return VT-x/AMD-V capabilities.
1228	*
1229	* @returns VINF_SUCCESS if supported, error code indicating why if not.
1230	* @param pfCaps Pointer to capability dword (out).
1231	* @todo Intended for main, which means we need to relax the privilege requires
1232	* when accessing certain vboxdrv functions.
1233	*/
1234	SUPR3DECL(int) SUPR3QueryVTCaps(uint32_t *pfCaps);
1235
1236	/**
1237	* Open the tracer.
1238	*
1239	* @returns VBox status code.
1240	* @param uCookie Cookie identifying the tracer we expect to talk to.
1241	* @param uArg Tracer specific open argument.
1242	*/
1243	SUPR3DECL(int) SUPR3TracerOpen(uint32_t uCookie, uintptr_t uArg);
1244
1245	/**
1246	* Closes the tracer.
1247	*
1248	* @returns VBox status code.
1249	*/
1250	SUPR3DECL(int) SUPR3TracerClose(void);
1251
1252	/**
1253	* Perform an I/O request on the tracer.
1254	*
1255	* @returns VBox status.
1256	* @param uCmd The tracer command.
1257	* @param uArg The argument.
1258	* @param piRetVal Where to store the tracer return value.
1259	*/
1260	SUPR3DECL(int) SUPR3TracerIoCtl(uintptr_t uCmd, uintptr_t uArg, int32_t *piRetVal);
1261
1262	/**
1263	* Registers the user module with the tracer.
1264	*
1265	* @returns VBox status code.
1266	* @param hModNative Native module handle. Pass ~(uintptr_t)0 if not
1267	* at hand.
1268	* @param pszModule The module name.
1269	* @param pVtgHdr The VTG header.
1270	* @param uVtgHdrAddr The address to which the VTG header is loaded
1271	* in the relevant execution context.
1272	* @param fFlags See SUP_TRACER_UMOD_FLAGS_XXX
1273	*/
1274	SUPR3DECL(int) SUPR3TracerRegisterModule(uintptr_t hModNative, const char pszModule, struct VTGOBJHDR pVtgHdr,
1275	RTUINTPTR uVtgHdrAddr, uint32_t fFlags);
1276
1277	/**
1278	* Deregisters the user module.
1279	*
1280	* @returns VBox status code.
1281	* @param pVtgHdr The VTG header.
1282	*/
1283	SUPR3DECL(int) SUPR3TracerDeregisterModule(struct VTGOBJHDR *pVtgHdr);
1284
1285	/**
1286	* Fire the probe.
1287	*
1288	* @param pVtgProbeLoc The probe location record.
1289	* @param uArg0 Raw probe argument 0.
1290	* @param uArg1 Raw probe argument 1.
1291	* @param uArg2 Raw probe argument 2.
1292	* @param uArg3 Raw probe argument 3.
1293	* @param uArg4 Raw probe argument 4.
1294	*/
1295	SUPDECL(void) SUPTracerFireProbe(struct VTGPROBELOC *pVtgProbeLoc, uintptr_t uArg0, uintptr_t uArg1, uintptr_t uArg2,
1296	uintptr_t uArg3, uintptr_t uArg4);
1297	/** @} */
1298	#endif /* IN_RING3 */
1299
1300	/** @name User mode module flags (SUPR3TracerRegisterModule & SUP_IOCTL_TRACER_UMOD_REG).
1301	* @{ */
1302	/** Executable image. */
1303	#define SUP_TRACER_UMOD_FLAGS_EXE UINT32_C(1)
1304	/** Shared library (DLL, DYLIB, SO, etc). */
1305	#define SUP_TRACER_UMOD_FLAGS_SHARED UINT32_C(2)
1306	/** Image type mask. */
1307	#define SUP_TRACER_UMOD_FLAGS_TYPE_MASK UINT32_C(3)
1308	/** @} */
1309
1310
1311	#ifdef IN_RING0
1312	/** @defgroup grp_sup_r0 SUP Host Context Ring-0 API
1313	* @ingroup grp_sup
1314	* @{
1315	*/
1316
1317	/**
1318	* Security objectype.
1319	*/
1320	typedef enum SUPDRVOBJTYPE
1321	{
1322	/** The usual invalid object. */
1323	SUPDRVOBJTYPE_INVALID = 0,
1324	/** A Virtual Machine instance. */
1325	SUPDRVOBJTYPE_VM,
1326	/** Internal network. */
1327	SUPDRVOBJTYPE_INTERNAL_NETWORK,
1328	/** Internal network interface. */
1329	SUPDRVOBJTYPE_INTERNAL_NETWORK_INTERFACE,
1330	/** Single release event semaphore. */
1331	SUPDRVOBJTYPE_SEM_EVENT,
1332	/** Multiple release event semaphore. */
1333	SUPDRVOBJTYPE_SEM_EVENT_MULTI,
1334	/** Raw PCI device. */
1335	SUPDRVOBJTYPE_RAW_PCI_DEVICE,
1336	/** The first invalid object type in this end. */
1337	SUPDRVOBJTYPE_END,
1338	/** The usual 32-bit type size hack. */
1339	SUPDRVOBJTYPE_32_BIT_HACK = 0x7ffffff
1340	} SUPDRVOBJTYPE;
1341
1342	/**
1343	* Object destructor callback.
1344	* This is called for reference counted objectes when the count reaches 0.
1345	*
1346	* @param pvObj The object pointer.
1347	* @param pvUser1 The first user argument.
1348	* @param pvUser2 The second user argument.
1349	*/
1350	typedef DECLCALLBACK(void) FNSUPDRVDESTRUCTOR(void pvObj, void pvUser1, void *pvUser2);
1351	/** Pointer to a FNSUPDRVDESTRUCTOR(). */
1352	typedef FNSUPDRVDESTRUCTOR *PFNSUPDRVDESTRUCTOR;
1353
1354	SUPR0DECL(void ) SUPR0ObjRegister(PSUPDRVSESSION pSession, SUPDRVOBJTYPE enmType, PFNSUPDRVDESTRUCTOR pfnDestructor, void pvUser1, void *pvUser2);
1355	SUPR0DECL(int) SUPR0ObjAddRef(void *pvObj, PSUPDRVSESSION pSession);
1356	SUPR0DECL(int) SUPR0ObjAddRefEx(void *pvObj, PSUPDRVSESSION pSession, bool fNoBlocking);
1357	SUPR0DECL(int) SUPR0ObjRelease(void *pvObj, PSUPDRVSESSION pSession);
1358	SUPR0DECL(int) SUPR0ObjVerifyAccess(void pvObj, PSUPDRVSESSION pSession, const char pszObjName);
1359
1360	SUPR0DECL(int) SUPR0LockMem(PSUPDRVSESSION pSession, RTR3PTR pvR3, uint32_t cPages, PRTHCPHYS paPages);
1361	SUPR0DECL(int) SUPR0UnlockMem(PSUPDRVSESSION pSession, RTR3PTR pvR3);
1362	SUPR0DECL(int) SUPR0ContAlloc(PSUPDRVSESSION pSession, uint32_t cPages, PRTR0PTR ppvR0, PRTR3PTR ppvR3, PRTHCPHYS pHCPhys);
1363	SUPR0DECL(int) SUPR0ContFree(PSUPDRVSESSION pSession, RTHCUINTPTR uPtr);
1364	SUPR0DECL(int) SUPR0LowAlloc(PSUPDRVSESSION pSession, uint32_t cPages, PRTR0PTR ppvR0, PRTR3PTR ppvR3, PRTHCPHYS paPages);
1365	SUPR0DECL(int) SUPR0LowFree(PSUPDRVSESSION pSession, RTHCUINTPTR uPtr);
1366	SUPR0DECL(int) SUPR0MemAlloc(PSUPDRVSESSION pSession, uint32_t cb, PRTR0PTR ppvR0, PRTR3PTR ppvR3);
1367	SUPR0DECL(int) SUPR0MemGetPhys(PSUPDRVSESSION pSession, RTHCUINTPTR uPtr, PSUPPAGE paPages);
1368	SUPR0DECL(int) SUPR0MemFree(PSUPDRVSESSION pSession, RTHCUINTPTR uPtr);
1369	SUPR0DECL(int) SUPR0PageAllocEx(PSUPDRVSESSION pSession, uint32_t cPages, uint32_t fFlags, PRTR3PTR ppvR3, PRTR0PTR ppvR0, PRTHCPHYS paPages);
1370	SUPR0DECL(int) SUPR0PageMapKernel(PSUPDRVSESSION pSession, RTR3PTR pvR3, uint32_t offSub, uint32_t cbSub, uint32_t fFlags, PRTR0PTR ppvR0);
1371	SUPR0DECL(int) SUPR0PageProtect(PSUPDRVSESSION pSession, RTR3PTR pvR3, RTR0PTR pvR0, uint32_t offSub, uint32_t cbSub, uint32_t fProt);
1372	SUPR0DECL(int) SUPR0PageFree(PSUPDRVSESSION pSession, RTR3PTR pvR3);
1373	SUPR0DECL(int) SUPR0GipMap(PSUPDRVSESSION pSession, PRTR3PTR ppGipR3, PRTHCPHYS pHCPhysGip);
1374	SUPR0DECL(int) SUPR0QueryVTCaps(PSUPDRVSESSION pSession, uint32_t *pfCaps);
1375	SUPR0DECL(int) SUPR0GipUnmap(PSUPDRVSESSION pSession);
1376	SUPR0DECL(int) SUPR0Printf(const char *pszFormat, ...);
1377	SUPR0DECL(SUPPAGINGMODE) SUPR0GetPagingMode(void);
1378	SUPR0DECL(int) SUPR0EnableVTx(bool fEnable);
1379	SUPR0DECL(bool) SUPR0SuspendVTxOnCpu(void);
1380	SUPR0DECL(void) SUPR0ResumeVTxOnCpu(bool fSuspended);
1381
1382	/** @name Absolute symbols
1383	* Take the address of these, don't try call them.
1384	* @{ */
1385	SUPR0DECL(void) SUPR0AbsIs64bit(void);
1386	SUPR0DECL(void) SUPR0Abs64bitKernelCS(void);
1387	SUPR0DECL(void) SUPR0Abs64bitKernelSS(void);
1388	SUPR0DECL(void) SUPR0Abs64bitKernelDS(void);
1389	SUPR0DECL(void) SUPR0AbsKernelCS(void);
1390	SUPR0DECL(void) SUPR0AbsKernelSS(void);
1391	SUPR0DECL(void) SUPR0AbsKernelDS(void);
1392	SUPR0DECL(void) SUPR0AbsKernelES(void);
1393	SUPR0DECL(void) SUPR0AbsKernelFS(void);
1394	SUPR0DECL(void) SUPR0AbsKernelGS(void);
1395	/** @} */
1396
1397	/**
1398	* Support driver component factory.
1399	*
1400	* Component factories are registered by drivers that provides services
1401	* such as the host network interface filtering and access to the host
1402	* TCP/IP stack.
1403	*
1404	* @remark Module dependencies and making sure that a component doesn't
1405	* get unloaded while in use, is the sole responsibility of the
1406	* driver/kext/whatever implementing the component.
1407	*/
1408	typedef struct SUPDRVFACTORY
1409	{
1410	/** The (unique) name of the component factory. */
1411	char szName[56];
1412	/**
1413	* Queries a factory interface.
1414	*
1415	* The factory interface is specific to each component and will be be
1416	* found in the header(s) for the component alongside its UUID.
1417	*
1418	* @returns Pointer to the factory interfaces on success, NULL on failure.
1419	*
1420	* @param pSupDrvFactory Pointer to this structure.
1421	* @param pSession The SUPDRV session making the query.
1422	* @param pszInterfaceUuid The UUID of the factory interface.
1423	*/
1424	DECLR0CALLBACKMEMBER(void , pfnQueryFactoryInterface,(struct SUPDRVFACTORY const pSupDrvFactory, PSUPDRVSESSION pSession, const char *pszInterfaceUuid));
1425	} SUPDRVFACTORY;
1426	/** Pointer to a support driver factory. */
1427	typedef SUPDRVFACTORY *PSUPDRVFACTORY;
1428	/** Pointer to a const support driver factory. */
1429	typedef SUPDRVFACTORY const *PCSUPDRVFACTORY;
1430
1431	SUPR0DECL(int) SUPR0ComponentRegisterFactory(PSUPDRVSESSION pSession, PCSUPDRVFACTORY pFactory);
1432	SUPR0DECL(int) SUPR0ComponentDeregisterFactory(PSUPDRVSESSION pSession, PCSUPDRVFACTORY pFactory);
1433	SUPR0DECL(int) SUPR0ComponentQueryFactory(PSUPDRVSESSION pSession, const char pszName, const char pszInterfaceUuid, void **ppvFactoryIf);
1434
1435
1436	/** @name Tracing
1437	* @{ */
1438
1439	/**
1440	* Tracer data associated with a provider.
1441	*/
1442	typedef union SUPDRVTRACERDATA
1443	{
1444	/** Generic */
1445	uint64_t au64[2];
1446
1447	/** DTrace data. */
1448	struct
1449	{
1450	/** Provider ID. */
1451	uintptr_t idProvider;
1452	/** The number of trace points provided. */
1453	uint32_t volatile cProvidedProbes;
1454	/** Whether we've invalidated this bugger. */
1455	bool fZombie;
1456	} DTrace;
1457	} SUPDRVTRACERDATA;
1458	/** Pointer to the tracer data associated with a provider. */
1459	typedef SUPDRVTRACERDATA *PSUPDRVTRACERDATA;
1460
1461	/**
1462	* Probe location info for ring-0.
1463	*
1464	* Since we cannot trust user tracepoint modules, we need to duplicate the probe
1465	* ID and enabled flag in ring-0.
1466	*/
1467	typedef struct SUPDRVPROBELOC
1468	{
1469	/** The probe ID. */
1470	uint32_t idProbe;
1471	/** Whether it's enabled or not. */
1472	bool fEnabled;
1473	} SUPDRVPROBELOC;
1474	/** Pointer to a ring-0 probe location record. */
1475	typedef SUPDRVPROBELOC *PSUPDRVPROBELOC;
1476
1477	/**
1478	* Probe info for ring-0.
1479	*
1480	* Since we cannot trust user tracepoint modules, we need to duplicate the
1481	* probe enable count.
1482	*/
1483	typedef struct SUPDRVPROBEINFO
1484	{
1485	/** The number of times this probe has been enabled. */
1486	uint32_t volatile cEnabled;
1487	} SUPDRVPROBEINFO;
1488	/** Pointer to a ring-0 probe info record. */
1489	typedef SUPDRVPROBEINFO *PSUPDRVPROBEINFO;
1490
1491	/**
1492	* Support driver tracepoint provider core.
1493	*/
1494	typedef struct SUPDRVVDTPROVIDERCORE
1495	{
1496	/** The tracer data member. */
1497	SUPDRVTRACERDATA TracerData;
1498	/** Pointer to the provider name (a copy that's always available). */
1499	const char *pszName;
1500	/** Pointer to the module name (a copy that's always available). */
1501	const char *pszModName;
1502
1503	/** The provider descriptor. */
1504	struct VTGDESCPROVIDER *pDesc;
1505	/** The VTG header. */
1506	struct VTGOBJHDR *pHdr;
1507
1508	/** The size of the entries in the pvProbeLocsEn table. */
1509	uint8_t cbProbeLocsEn;
1510	/** The actual module bit count (corresponds to cbProbeLocsEn). */
1511	uint8_t cBits;
1512	/** Set if this is a Umod, otherwise clear.. */
1513	bool fUmod;
1514	/** Explicit alignment padding (paranoia). */
1515	uint8_t abAlignment[ARCH_BITS == 32 ? 1 : 5];
1516
1517	/** The probe locations used for descriptive purposes. */
1518	struct VTGPROBELOC const *paProbeLocsRO;
1519	/** Pointer to the probe location array where the enable flag needs
1520	* flipping. For kernel providers, this will always be SUPDRVPROBELOC,
1521	* while user providers can either be 32-bit or 64-bit. Use
1522	* cbProbeLocsEn to calculate the address of an entry. */
1523	void *pvProbeLocsEn;
1524	/** Pointer to the probe array containing the enabled counts. */
1525	uint32_t *pacProbeEnabled;
1526
1527	/** The ring-0 probe location info for user tracepoint modules.
1528	* This is NULL if fUmod is false. */
1529	PSUPDRVPROBELOC paR0ProbeLocs;
1530	/** The ring-0 probe info for user tracepoint modules.
1531	* This is NULL if fUmod is false. */
1532	PSUPDRVPROBEINFO paR0Probes;
1533
1534	} SUPDRVVDTPROVIDERCORE;
1535	/** Pointer to a tracepoint provider core structure. */
1536	typedef SUPDRVVDTPROVIDERCORE *PSUPDRVVDTPROVIDERCORE;
1537
1538	/** Pointer to a tracer registration record. */
1539	typedef struct SUPDRVTRACERREG const *PCSUPDRVTRACERREG;
1540	/**
1541	* Support driver tracer registration record.
1542	*/
1543	typedef struct SUPDRVTRACERREG
1544	{
1545	/** Magic value (SUPDRVTRACERREG_MAGIC). */
1546	uint32_t u32Magic;
1547	/** Version (SUPDRVTRACERREG_VERSION). */
1548	uint32_t u32Version;
1549
1550	/**
1551	* Fire off a kernel probe.
1552	*
1553	* @param pVtgProbeLoc The probe location record.
1554	* @param uArg0 The first raw probe argument.
1555	* @param uArg1 The second raw probe argument.
1556	* @param uArg2 The third raw probe argument.
1557	* @param uArg3 The fourth raw probe argument.
1558	* @param uArg4 The fifth raw probe argument.
1559	*
1560	* @remarks SUPR0TracerFireProbe will do a tail jump thru this member, so
1561	* no extra stack frames will be added.
1562	* @remarks This does not take a 'this' pointer argument because it doesn't map
1563	* well onto VTG or DTrace.
1564	*
1565	*/
1566	DECLR0CALLBACKMEMBER(void, pfnProbeFireKernel, (struct VTGPROBELOC *pVtgProbeLoc, uintptr_t uArg0, uintptr_t uArg1, uintptr_t uArg2,
1567	uintptr_t uArg3, uintptr_t uArg4));
1568
1569	/**
1570	* Fire off a user-mode probe.
1571	*
1572	* @param pThis Pointer to the registration record.
1573	*
1574	* @param pVtgProbeLoc The probe location record.
1575	* @param pSession The user session.
1576	* @param pCtx The usermode context info.
1577	* @param pVtgHdr The VTG header (read-only).
1578	* @param pProbeLocRO The read-only probe location record .
1579	*/
1580	DECLR0CALLBACKMEMBER(void, pfnProbeFireUser, (PCSUPDRVTRACERREG pThis, PSUPDRVSESSION pSession, PCSUPDRVTRACERUSRCTX pCtx,
1581	struct VTGOBJHDR const pVtgHdr, struct VTGPROBELOC const pProbeLocRO));
1582
1583	/**
1584	* Opens up the tracer.
1585	*
1586	* @returns VBox status code.
1587	* @param pThis Pointer to the registration record.
1588	* @param pSession The session doing the opening.
1589	* @param uCookie A cookie (magic) unique to the tracer, so it can
1590	* fend off incompatible clients.
1591	* @param uArg Tracer specific argument.
1592	* @param puSessionData Pointer to the session data variable. This must be
1593	* set to a non-zero value on success.
1594	*/
1595	DECLR0CALLBACKMEMBER(int, pfnTracerOpen, (PCSUPDRVTRACERREG pThis, PSUPDRVSESSION pSession, uint32_t uCookie, uintptr_t uArg,
1596	uintptr_t *puSessionData));
1597
1598	/**
1599	* I/O control style tracer communication method.
1600	*
1601	*
1602	* @returns VBox status code.
1603	* @param pThis Pointer to the registration record.
1604	* @param pSession The session.
1605	* @param uSessionData The session data value.
1606	* @param uCmd The tracer specific command.
1607	* @param uArg The tracer command specific argument.
1608	* @param piRetVal The tracer specific return value.
1609	*/
1610	DECLR0CALLBACKMEMBER(int, pfnTracerIoCtl, (PCSUPDRVTRACERREG pThis, PSUPDRVSESSION pSession, uintptr_t uSessionData,
1611	uintptr_t uCmd, uintptr_t uArg, int32_t *piRetVal));
1612
1613	/**
1614	* Cleans up data the tracer has associated with a session.
1615	*
1616	* @param pThis Pointer to the registration record.
1617	* @param pSession The session handle.
1618	* @param uSessionData The data assoicated with the session.
1619	*/
1620	DECLR0CALLBACKMEMBER(void, pfnTracerClose, (PCSUPDRVTRACERREG pThis, PSUPDRVSESSION pSession, uintptr_t uSessionData));
1621
1622	/**
1623	* Registers a provider.
1624	*
1625	* @returns VBox status code.
1626	* @param pThis Pointer to the registration record.
1627	* @param pCore The provider core data.
1628	*
1629	* @todo Kernel vs. Userland providers.
1630	*/
1631	DECLR0CALLBACKMEMBER(int, pfnProviderRegister, (PCSUPDRVTRACERREG pThis, PSUPDRVVDTPROVIDERCORE pCore));
1632
1633	/**
1634	* Attempts to deregisters a provider.
1635	*
1636	* @returns VINF_SUCCESS or VERR_TRY_AGAIN. If the latter, the provider
1637	* should be made as harmless as possible before returning as the
1638	* VTG object and associated code will be unloaded upon return.
1639	*
1640	* @param pThis Pointer to the registration record.
1641	* @param pCore The provider core data.
1642	*/
1643	DECLR0CALLBACKMEMBER(int, pfnProviderDeregister, (PCSUPDRVTRACERREG pThis, PSUPDRVVDTPROVIDERCORE pCore));
1644
1645	/**
1646	* Make another attempt at unregister a busy provider.
1647	*
1648	* @returns VINF_SUCCESS or VERR_TRY_AGAIN.
1649	* @param pThis Pointer to the registration record.
1650	* @param pCore The provider core data.
1651	*/
1652	DECLR0CALLBACKMEMBER(int, pfnProviderDeregisterZombie, (PCSUPDRVTRACERREG pThis, PSUPDRVVDTPROVIDERCORE pCore));
1653
1654	/** End marker (SUPDRVTRACERREG_MAGIC). */
1655	uintptr_t uEndMagic;
1656	} SUPDRVTRACERREG;
1657
1658	/** Tracer magic (Kenny Garrett). */
1659	#define SUPDRVTRACERREG_MAGIC UINT32_C(0x19601009)
1660	/** Tracer registration structure version. */
1661	#define SUPDRVTRACERREG_VERSION RT_MAKE_U32(0, 1)
1662
1663	/** Pointer to a trace helper structure. */
1664	typedef struct SUPDRVTRACERHLP const *PCSUPDRVTRACERHLP;
1665	/**
1666	* Helper structure.
1667	*/
1668	typedef struct SUPDRVTRACERHLP
1669	{
1670	/** The structure version (SUPDRVTRACERHLP_VERSION). */
1671	uintptr_t uVersion;
1672
1673	/** @todo ... */
1674
1675	/** End marker (SUPDRVTRACERHLP_VERSION) */
1676	uintptr_t uEndVersion;
1677	} SUPDRVTRACERHLP;
1678	/** Tracer helper structure version. */
1679	#define SUPDRVTRACERHLP_VERSION RT_MAKE_U32(0, 1)
1680
1681	SUPR0DECL(int) SUPR0TracerRegisterImpl(void hMod, PSUPDRVSESSION pSession, PCSUPDRVTRACERREG pReg, PCSUPDRVTRACERHLP ppHlp);
1682	SUPR0DECL(int) SUPR0TracerDeregisterImpl(void *hMod, PSUPDRVSESSION pSession);
1683	SUPR0DECL(int) SUPR0TracerRegisterDrv(PSUPDRVSESSION pSession, struct VTGOBJHDR pVtgHdr, const char pszName);
1684	SUPR0DECL(void) SUPR0TracerDeregisterDrv(PSUPDRVSESSION pSession);
1685	SUPR0DECL(int) SUPR0TracerRegisterModule(void hMod, struct VTGOBJHDR pVtgHdr);
1686	SUPR0DECL(void) SUPR0TracerFireProbe(struct VTGPROBELOC *pVtgProbeLoc, uintptr_t uArg0, uintptr_t uArg1, uintptr_t uArg2,
1687	uintptr_t uArg3, uintptr_t uArg4);
1688	SUPR0DECL(void) SUPR0TracerUmodProbeFire(PSUPDRVSESSION pSession, PSUPDRVTRACERUSRCTX pCtx);
1689	/** @} */
1690
1691
1692	/**
1693	* Service request callback function.
1694	*
1695	* @returns VBox status code.
1696	* @param pSession The caller's session.
1697	* @param u64Arg 64-bit integer argument.
1698	* @param pReqHdr The request header. Input / Output. Optional.
1699	*/
1700	typedef DECLCALLBACK(int) FNSUPR0SERVICEREQHANDLER(PSUPDRVSESSION pSession, uint32_t uOperation,
1701	uint64_t u64Arg, PSUPR0SERVICEREQHDR pReqHdr);
1702	/** Pointer to a FNR0SERVICEREQHANDLER(). */
1703	typedef R0PTRTYPE(FNSUPR0SERVICEREQHANDLER *) PFNSUPR0SERVICEREQHANDLER;
1704
1705
1706	/** @defgroup grp_sup_r0_idc The IDC Interface
1707	* @ingroup grp_sup_r0
1708	* @{
1709	*/
1710
1711	/** The current SUPDRV IDC version.
1712	* This follows the usual high word / low word rules, i.e. high word is the
1713	* major number and it signifies incompatible interface changes. */
1714	#define SUPDRV_IDC_VERSION UINT32_C(0x00010000)
1715
1716	/**
1717	* Inter-Driver Communication Handle.
1718	*/
1719	typedef union SUPDRVIDCHANDLE
1720	{
1721	/** Padding for opaque usage.
1722	* Must be greater or equal in size than the private struct. */
1723	void *apvPadding[4];
1724	#ifdef SUPDRVIDCHANDLEPRIVATE_DECLARED
1725	/** The private view. */
1726	struct SUPDRVIDCHANDLEPRIVATE s;
1727	#endif
1728	} SUPDRVIDCHANDLE;
1729	/** Pointer to a handle. */
1730	typedef SUPDRVIDCHANDLE *PSUPDRVIDCHANDLE;
1731
1732	SUPR0DECL(int) SUPR0IdcOpen(PSUPDRVIDCHANDLE pHandle, uint32_t uReqVersion, uint32_t uMinVersion,
1733	uint32_t puSessionVersion, uint32_t puDriverVersion, uint32_t *puDriverRevision);
1734	SUPR0DECL(int) SUPR0IdcCall(PSUPDRVIDCHANDLE pHandle, uint32_t iReq, void *pvReq, uint32_t cbReq);
1735	SUPR0DECL(int) SUPR0IdcClose(PSUPDRVIDCHANDLE pHandle);
1736	SUPR0DECL(PSUPDRVSESSION) SUPR0IdcGetSession(PSUPDRVIDCHANDLE pHandle);
1737	SUPR0DECL(int) SUPR0IdcComponentRegisterFactory(PSUPDRVIDCHANDLE pHandle, PCSUPDRVFACTORY pFactory);
1738	SUPR0DECL(int) SUPR0IdcComponentDeregisterFactory(PSUPDRVIDCHANDLE pHandle, PCSUPDRVFACTORY pFactory);
1739
1740	/** @} */
1741
1742	/** @name Ring-0 module entry points.
1743	*
1744	* These can be exported by ring-0 modules SUP are told to load.
1745	*
1746	* @{ */
1747	DECLEXPORT(int) ModuleInit(void *hMod);
1748	DECLEXPORT(void) ModuleTerm(void *hMod);
1749	/** @} */
1750
1751
1752	/** @} */
1753	#endif
1754
1755
1756	/** @} */
1757
1758	RT_C_DECLS_END
1759
1760	#endif
1761

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/sup.h@ 46093

Download in other formats: