VirtualBox

source: vbox/trunk/include/VBox/scsi.h@ 64891

Last change on this file since 64891 was 64139, checked in by vboxsync, 8 years ago

scsi.h: Add new command to retrieve a list of supported commands

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 11.8 KB
Line 
1/** @file
2 * VirtualBox - SCSI declarations. (DEV,+)
3 */
4
5/*
6 * Copyright (C) 2006-2016 Oracle Corporation
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 */
25
26#ifndef ___VBox_scsi_h
27#define ___VBox_scsi_h
28
29#include <iprt/assert.h>
30
31#ifdef RT_OS_FREEBSD
32/* The cam subsystem doesn't allow more */
33# define SCSI_MAX_BUFFER_SIZE (64 * _1K)
34#else
35# define SCSI_MAX_BUFFER_SIZE (100 * _1K)
36#endif
37
38/**
39 * SCSI command opcode identifiers.
40 *
41 * SCSI-3, so far for CD/DVD Logical Units, from Table 49 of the MMC-3 draft standard.
42 */
43typedef enum SCSICMD
44{
45 SCSI_BLANK = 0xa1,
46 SCSI_CLOSE_TRACK_SESSION = 0x5b,
47 SCSI_ERASE_10 = 0x2c,
48 SCSI_FORMAT_UNIT = 0x04,
49 SCSI_GET_CONFIGURATION = 0x46,
50 SCSI_GET_EVENT_STATUS_NOTIFICATION = 0x4a,
51 SCSI_GET_PERFORMANCE = 0xac,
52 /** Inquiry command. */
53 SCSI_INQUIRY = 0x12,
54 SCSI_LOAD_UNLOAD_MEDIUM = 0xa6,
55 SCSI_MECHANISM_STATUS = 0xbd,
56 SCSI_MODE_SELECT_10 = 0x55,
57 SCSI_MODE_SENSE_10 = 0x5a,
58 SCSI_PAUSE_RESUME = 0x4b,
59 SCSI_PLAY_AUDIO_10 = 0x45,
60 SCSI_PLAY_AUDIO_12 = 0xa5,
61 SCSI_PLAY_AUDIO_MSF = 0x47,
62 SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1e,
63 /** Read(10) command. */
64 SCSI_READ_10 = 0x28,
65 SCSI_READ_12 = 0xa8,
66 SCSI_READ_BUFFER = 0x3c,
67 SCSI_READ_BUFFER_CAPACITY = 0x5c,
68 /** Read Capacity(6) command. */
69 SCSI_READ_CAPACITY = 0x25,
70 SCSI_READ_CD = 0xbe,
71 SCSI_READ_CD_MSF = 0xb9,
72 SCSI_READ_DISC_INFORMATION = 0x51,
73 SCSI_READ_DVD_STRUCTURE = 0xad,
74 SCSI_READ_FORMAT_CAPACITIES = 0x23,
75 SCSI_READ_SUBCHANNEL = 0x42,
76 SCSI_READ_TOC_PMA_ATIP = 0x43,
77 SCSI_READ_TRACK_INFORMATION = 0x52,
78 SCSI_REPAIR_TRACK = 0x58,
79 SCSI_REPORT_KEY = 0xa4,
80 SCSI_REQUEST_SENSE = 0x03,
81 SCSI_RESERVE_TRACK = 0x53,
82 SCSI_SCAN = 0xba,
83 SCSI_SEEK_10 = 0x2b,
84 SCSI_SEND_CUE_SHEET = 0x5d,
85 SCSI_SEND_DVD_STRUCTURE = 0xbf,
86 SCSI_SEND_EVENT = 0xa2,
87 SCSI_SEND_KEY = 0xa3,
88 SCSI_SEND_OPC_INFORMATION = 0x54,
89 SCSI_SET_CD_SPEED = 0xbb,
90 SCSI_SET_READ_AHEAD = 0xa7,
91 SCSI_SET_STREAMING = 0xb6,
92 SCSI_START_STOP_UNIT = 0x1b,
93 SCSI_LOAD_UNLOAD = 0x1b,
94 SCSI_STOP_PLAY_SCAN = 0x4e,
95 /** Synchronize Cache command. */
96 SCSI_SYNCHRONIZE_CACHE = 0x35,
97 SCSI_TEST_UNIT_READY = 0x00,
98 SCSI_VERIFY_10 = 0x2f,
99 /** Write(10) command. */
100 SCSI_WRITE_10 = 0x2a,
101 SCSI_WRITE_12 = 0xaa,
102 SCSI_WRITE_AND_VERIFY_10 = 0x2e,
103 SCSI_WRITE_BUFFER = 0x3b,
104
105 /** Mode Sekect(6) command */
106 SCSI_MODE_SELECT_6 = 0x15,
107 /** Mode Sense(6) command */
108 SCSI_MODE_SENSE_6 = 0x1a,
109 /** Report LUNs command. */
110 SCSI_REPORT_LUNS = 0xa0,
111 SCSI_REPORT_DENSITY = 0x44,
112 /** Rezero Unit command. Obsolete for ages now, but used by cdrecord. */
113 SCSI_REZERO_UNIT = 0x01,
114 SCSI_REWIND = 0x01,
115 SCSI_SERVICE_ACTION_IN_16 = 0x9e,
116 SCSI_READ_16 = 0x88,
117 SCSI_WRITE_16 = 0x8a,
118 SCSI_READ_6 = 0x08,
119 SCSI_WRITE_6 = 0x0a,
120 SCSI_LOG_SENSE = 0x4d,
121 SCSI_UNMAP = 0x42,
122 SCSI_RESERVE_6 = 0x16,
123 SCSI_RELEASE_6 = 0x17,
124 SCSI_RESERVE_10 = 0x56,
125 SCSI_RELEASE_10 = 0x57,
126 SCSI_READ_BLOCK_LIMITS = 0x05,
127 SCSI_MAINTENANCE_IN = 0xa3
128} SCSICMD;
129
130/**
131 * Service action in opcode identifiers
132 */
133typedef enum SCSISVCACTIONIN
134{
135 SCSI_SVC_ACTION_IN_READ_CAPACITY_16 = 0x10
136} SCSISVCACTIONIN;
137
138/**
139 * Maintenance in opcode identifiers
140 */
141typedef enum SCSIMAINTENANCEIN
142{
143 SCSI_MAINTENANCE_IN_REPORT_SUPP_OPC = 0x0c
144} SCSIMAINTENANCEIN;
145
146/* Mode page codes for mode sense/select commands. */
147#define SCSI_MODEPAGE_ERROR_RECOVERY 0x01
148#define SCSI_MODEPAGE_WRITE_PARAMETER 0x05
149#define SCSI_MODEPAGE_CD_STATUS 0x2a
150
151
152/* Page control codes. */
153#define SCSI_PAGECONTROL_CURRENT 0x00
154#define SCSI_PAGECONTROL_CHANGEABLE 0x01
155#define SCSI_PAGECONTROL_DEFAULT 0x02
156#define SCSI_PAGECONTROL_SAVED 0x03
157
158
159/* Status codes */
160#define SCSI_STATUS_OK 0x00
161#define SCSI_STATUS_CHECK_CONDITION 0x02
162#define SCSI_STATUS_CONDITION_MET 0x04
163#define SCSI_STATUS_BUSY 0x08
164#define SCSI_STATUS_INTERMEDIATE 0x10
165#define SCSI_STATUS_DATA_UNDEROVER_RUN 0x12
166#define SCSI_STATUS_INTERMEDIATE_CONDITION_MET 0x14
167#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
168#define SCSI_STATUS_COMMAND_TERMINATED 0x22
169#define SCSI_STATUS_QUEUE_FULL 0x28
170#define SCSI_STATUS_ACA_ACTIVE 0x30
171#define SCSI_STATUS_TASK_ABORTED 0x40
172
173/* Sense data response codes - This is the first byte in the sense data */
174#define SCSI_SENSE_RESPONSE_CODE_CURR_FIXED 0x70
175#define SCSI_SENSE_RESPONSE_CODE_DEFERRED_FIXED 0x71
176#define SCSI_SENSE_RESPONSE_CODE_CURR_DESC 0x72
177#define SCSI_SENSE_RESPONSE_CODE_DEFERRED_DESC 0x73
178
179/* Sense keys */
180#define SCSI_SENSE_NONE 0
181#define SCSI_SENSE_RECOVERED_ERROR 1
182#define SCSI_SENSE_NOT_READY 2
183#define SCSI_SENSE_MEDIUM_ERROR 3
184#define SCSI_SENSE_HARDWARE_ERROR 4
185#define SCSI_SENSE_ILLEGAL_REQUEST 5
186#define SCSI_SENSE_UNIT_ATTENTION 6
187#define SCSI_SENSE_DATA_PROTECT 7
188#define SCSI_SENSE_BLANK_CHECK 8
189#define SCSI_SENSE_VENDOR_SPECIFIC 9
190#define SCSI_SENSE_COPY_ABORTED 10
191#define SCSI_SENSE_ABORTED_COMMAND 11
192#define SCSI_SENSE_VOLUME_OVERFLOW 13
193#define SCSI_SENSE_MISCOMPARE 14
194
195/* Additional sense bit flags (to be ORed with sense key). */
196#define SCSI_SENSE_FLAG_FILEMARK 0x80
197#define SCSI_SENSE_FLAG_EOM 0x40
198#define SCSI_SENSE_FLAG_ILI 0x20
199
200/* Additional sense keys */
201#define SCSI_ASC_NONE 0x00
202#define SCSI_ASC_WRITE_ERROR 0x0c
203#define SCSI_ASC_READ_ERROR 0x11
204#define SCSI_ASC_ILLEGAL_OPCODE 0x20
205#define SCSI_ASC_LOGICAL_BLOCK_OOR 0x21
206#define SCSI_ASC_INV_FIELD_IN_CMD_PACKET 0x24
207#define SCSI_ASC_WRITE_PROTECTED 0x27
208#define SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
209#define SCSI_ASC_POWER_ON_RESET_BUS_DEVICE_RESET_OCCURRED 0x29
210#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3a
211#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
212#define SCSI_ASC_INVALID_MESSAGE 0x49
213#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
214#define SCSI_ASC_LOGICAL_UNIT_DOES_NOT_RESPOND_TO_SELECTION 0x00
215#define SCSI_ASC_SYSTEM_RESOURCE_FAILURE 0x55
216
217/** Additional sense code qualifiers (ASCQ). */
218/* NB: The ASC/ASCQ combination determines the full meaning. */
219#define SCSI_ASCQ_SYSTEM_BUFFER_FULL 0x01
220#define SCSI_ASCQ_POWER_ON_RESET_BUS_DEVICE_RESET_OCCURRED 0x00
221#define SCSI_ASCQ_END_OF_DATA_DETECTED 0x05
222#define SCSI_ASCQ_FILEMARK_DETECTED 0x01
223#define SCSI_ASCQ_EOP_EOM_DETECTED 0x02
224#define SCSI_ASCQ_SETMARK_DETECTED 0x03
225#define SCSI_ASCQ_BOP_BOM_DETECTED 0x04
226
227/** @name SCSI_INQUIRY
228 * @{
229 */
230#pragma pack(1)
231typedef struct SCSIINQUIRYCDB
232{
233 unsigned u8Cmd : 8;
234 unsigned fEVPD : 1;
235 unsigned u4Reserved : 4;
236 unsigned u3LUN : 3;
237 unsigned u8PageCode : 8;
238 unsigned u8Reserved : 8;
239 uint8_t cbAlloc;
240 uint8_t u8Control;
241} SCSIINQUIRYCDB;
242#pragma pack()
243AssertCompileSize(SCSIINQUIRYCDB, 6);
244typedef SCSIINQUIRYCDB *PSCSIINQUIRYCDB;
245typedef const SCSIINQUIRYCDB *PCSCSIINQUIRYCDB;
246
247#pragma pack(1)
248typedef struct SCSIINQUIRYDATA
249{
250 unsigned u5PeripheralDeviceType : 5; /**< 0x00 / 00 */
251 unsigned u3PeripheralQualifier : 3;
252 unsigned u6DeviceTypeModifier : 7; /**< 0x01 */
253 unsigned fRMB : 1;
254 unsigned u3AnsiVersion : 3; /**< 0x02 */
255 unsigned u3EcmaVersion : 3;
256 unsigned u2IsoVersion : 2;
257 unsigned u4ResponseDataFormat : 4; /**< 0x03 */
258 unsigned u2Reserved0 : 2;
259 unsigned fTrmlOP : 1;
260 unsigned fAEC : 1;
261 unsigned cbAdditional : 8; /**< 0x04 */
262 unsigned u8Reserved1 : 8; /**< 0x05 */
263 unsigned u8Reserved2 : 8; /**< 0x06 */
264 unsigned fSftRe : 1; /**< 0x07 */
265 unsigned fCmdQue : 1;
266 unsigned fReserved3 : 1;
267 unsigned fLinked : 1;
268 unsigned fSync : 1;
269 unsigned fWBus16 : 1;
270 unsigned fWBus32 : 1;
271 unsigned fRelAdr : 1;
272 int8_t achVendorId[8]; /**< 0x08 */
273 int8_t achProductId[16]; /**< 0x10 */
274 int8_t achProductLevel[4]; /**< 0x20 */
275 uint8_t abVendorSpecific[20]; /**< 0x24/36 - Optional it seems. */
276 uint8_t abReserved4[40];
277 uint8_t abVendorSpecificParameters[1]; /**< 0x60/96 - Variable size. */
278} SCSIINQUIRYDATA;
279#pragma pack()
280AssertCompileSize(SCSIINQUIRYDATA, 97);
281typedef SCSIINQUIRYDATA *PSCSIINQUIRYDATA;
282typedef const SCSIINQUIRYDATA *PCSCSIINQUIRYDATA;
283
284#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_CONNECTED 0x00
285#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_BUT_SUPPORTED 0x01
286#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_NOT_SUPPORTED 0x03
287
288#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS 0x00
289#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_SEQUENTIAL_ACCESS 0x01
290#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_CD_DVD 0x05
291#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_UNKNOWN 0x1f
292
293/** @} */
294
295#if defined(IN_RING3) && (defined(LOG_ENABLED) || defined(RT_STRICT))
296const char * SCSICmdText(uint8_t uCmd);
297const char * SCSISenseText(uint8_t uSense);
298const char * SCSISenseExtText(uint8_t uASC, uint8_t uASCQ);
299int SCSILogModePage(char *pszBuf, size_t cchBuffer, uint8_t *pbModePage,
300 size_t cbModePage);
301int SCSILogCueSheet(char *pszBuf, size_t cchBuffer, uint8_t *pbCueSheet,
302 size_t cbCueSheet);
303#endif
304
305#endif
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette