scsi.h@ 5285

Last change on this file since 5285 was 4071, checked in by vboxsync, 17 years ago
Biggest check-in ever. New source code headers for all (C) innotek files.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 18.4 KB

Line
1	/** @file
2	* VirtualBox - SCSI declarations.
3	*/
4
5	/*
6	* Copyright (C) 2006-2007 innotek GmbH
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License as published by the Free Software Foundation,
12	* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
13	* distribution. VirtualBox OSE is distributed in the hope that it will
14	* be useful, but WITHOUT ANY WARRANTY of any kind.
15	*/
16
17	#ifndef ___VBox_scsi_h
18	#define ___VBox_scsi_h
19
20
21	/**
22	* SCSI command opcode identifiers.
23	*
24	* SCSI-3, so far for CD/DVD Logical Units, from Table 49 of the MMC-3 draft standard.
25	*/
26	typedef enum SCSICMD
27	{
28	SCSI_BLANK = 0xa1,
29	SCSI_CLOSE_TRACK_SESSION = 0x5b,
30	SCSI_ERASE_10 = 0x2c,
31	SCSI_FORMAT_UNIT = 0x04,
32	SCSI_GET_CONFIGURATION = 0x46,
33	SCSI_GET_EVENT_STATUS_NOTIFICATION = 0x4a,
34	SCSI_GET_PERFORMANCE = 0xac,
35	/** Inquiry command. */
36	SCSI_INQUIRY = 0x12,
37	SCSI_LOAD_UNLOAD_MEDIUM = 0xa6,
38	SCSI_MECHANISM_STATUS = 0xbd,
39	SCSI_MODE_SELECT_10 = 0x55,
40	SCSI_MODE_SENSE_10 = 0x5a,
41	SCSI_PAUSE_RESUME = 0x4b,
42	SCSI_PLAY_AUDIO_10 = 0x45,
43	SCSI_PLAY_AUDIO_12 = 0xa5,
44	SCSI_PLAY_AUDIO_MSF = 0x47,
45	SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1e,
46	/** Read(10) command. */
47	SCSI_READ_10 = 0x28,
48	SCSI_READ_12 = 0xa8,
49	SCSI_READ_BUFFER = 0x3c,
50	SCSI_READ_BUFFER_CAPACITY = 0x5c,
51	/** Read Capacity(6) command. */
52	SCSI_READ_CAPACITY = 0x25,
53	SCSI_READ_CD = 0xbe,
54	SCSI_READ_CD_MSF = 0xb9,
55	SCSI_READ_DISC_INFORMATION = 0x51,
56	SCSI_READ_DVD_STRUCTURE = 0xad,
57	SCSI_READ_FORMAT_CAPACITIES = 0x23,
58	SCSI_READ_SUBCHANNEL = 0x42,
59	SCSI_READ_TOC_PMA_ATIP = 0x43,
60	SCSI_READ_TRACK_INFORMATION = 0x52,
61	SCSI_REPAIR_TRACK = 0x58,
62	SCSI_REPORT_KEY = 0xa4,
63	SCSI_REQUEST_SENSE = 0x03,
64	SCSI_RESERVE_TRACK = 0x53,
65	SCSI_SCAN = 0xba,
66	SCSI_SEEK_10 = 0x2b,
67	SCSI_SEND_CUE_SHEET = 0x5d,
68	SCSI_SEND_DVD_STRUCTURE = 0xbf,
69	SCSI_SEND_EVENT = 0xa2,
70	SCSI_SEND_KEY = 0xa3,
71	SCSI_SEND_OPC_INFORMATION = 0x54,
72	SCSI_SET_CD_SPEED = 0xbb,
73	SCSI_SET_READ_AHEAD = 0xa7,
74	SCSI_SET_STREAMING = 0xb6,
75	SCSI_START_STOP_UNIT = 0x1b,
76	SCSI_STOP_PLAY_SCAN = 0x4e,
77	/** Synchronize Cache command. */
78	SCSI_SYNCHRONIZE_CACHE = 0x35,
79	SCSI_TEST_UNIT_READY = 0x00,
80	SCSI_VERIFY_10 = 0x2f,
81	/** Write(10) command. */
82	SCSI_WRITE_10 = 0x2a,
83	SCSI_WRITE_12 = 0xaa,
84	SCSI_WRITE_AND_VERIFY_10 = 0x2e,
85	SCSI_WRITE_BUFFER = 0x3b,
86
87	/** Mode Sense(6) command */
88	SCSI_MODE_SENSE_6 = 0x1a,
89	/** Report LUNs command. */
90	SCSI_REPORT_LUNS = 0xa0,
91	/** Rezero Unit command. Obsolete for ages now, but used by cdrecord. */
92	SCSI_REZERO_UNIT = 0x01
93	} SCSICMD;
94
95	#ifdef DEBUG
96	static const char * const g_apszSCSICmdNames[256] =
97	{
98	"TEST UNIT READY", /* 0x00 */
99	"REZERO UNIT", /* 0x01 */
100	"", /* 0x02 */
101	"REQUEST SENSE", /* 0x03 */
102	"FORMAT UNIT", /* 0x04 */
103	"READ BLOCK LIMITS", /* 0x05 */
104	"", /* 0x06 */
105	"REASSIGN BLOCKS", /* 0x07 */
106	"READ (6)", /* 0x08 */
107	"", /* 0x09 */
108	"WRITE (6)", /* 0x0a */
109	"SEEK (6)", /* 0x0b */
110	"", /* 0x0c */
111	"", /* 0x0d */
112	"", /* 0x0e */
113	"READ REVERSE (6)", /* 0x0f */
114	"READ FILEMARKS (6)", /* 0x10 */
115	"SPACE (6)", /* 0x11 */
116	"INQUIRY", /* 0x12 */
117	"VERIFY (6)", /* 0x13 */
118	"RECOVER BUFFERED DATA", /* 0x14 */
119	"MODE SELECT (6)", /* 0x15 */
120	"RESERVE (6)", /* 0x16 */
121	"RELEASE (6)", /* 0x17 */
122	"COPY", /* 0x18 */
123	"ERASE (6)", /* 0x19 */
124	"MODE SENSE (6)", /* 0x1a */
125	"START STOP UNIT", /* 0x1b */
126	"RECEIVE DIAGNOSTIC RESULTS", /* 0x1c */
127	"SEND DIAGNOSTIC", /* 0x1d */
128	"PREVENT ALLOW MEDIUM REMOVAL", /* 0x1e */
129	"", /* 0x1f */
130	"", /* 0x20 */
131	"", /* 0x21 */
132	"", /* 0x22 */
133	"READ FORMAT CAPACITIES", /* 0x23 */
134	"SET WINDOW", /* 0x24 */
135	"READ CAPACITY", /* 0x25 */
136	"", /* 0x26 */
137	"", /* 0x27 */
138	"READ (10)", /* 0x28 */
139	"READ GENERATION", /* 0x29 */
140	"WRITE (10)", /* 0x2a */
141	"SEEK (10)", /* 0x2b */
142	"ERASE (10)", /* 0x2c */
143	"READ UPDATED BLOCK", /* 0x2d */
144	"WRITE AND VERIFY (10)", /* 0x2e */
145	"VERIFY (10)", /* 0x2f */
146	"SEARCH DATA HIGH (10)", /* 0x30 */
147	"SEARCH DATA EQUAL (10)", /* 0x31 */
148	"SEARCH DATA LOW (10)", /* 0x32 */
149	"SET LIMITS (10)", /* 0x33 */
150	"PRE-FETCH (10)", /* 0x34 */
151	"SYNCHRONIZE CACHE (10)", /* 0x35 */
152	"LOCK UNLOCK CACHE (10)", /* 0x36 */
153	"READ DEFECT DATA (10)", /* 0x37 */
154	"MEDIUM SCAN", /* 0x38 */
155	"COMPARE", /* 0x39 */
156	"COPY AND VERIFY", /* 0x3a */
157	"WRITE BUFFER", /* 0x3b */
158	"READ BUFFER", /* 0x3c */
159	"UPDATE BLOCK", /* 0x3d */
160	"READ LONG (10)", /* 0x3e */
161	"WRITE LONG (10)", /* 0x3f */
162	"CHANGE DEFINITION", /* 0x40 */
163	"WRITE SAME (10)", /* 0x41 */
164	"READ SUBCHANNEL", /* 0x42 */
165	"READ TOC/PMA/ATIP", /* 0x43 */
166	"REPORT DENSITY SUPPORT", /* 0x44 */
167	"PLAY AUDIO (10)", /* 0x45 */
168	"GET CONFIGURATION", /* 0x46 */
169	"PLAY AUDIO MSF", /* 0x47 */
170	"", /* 0x48 */
171	"", /* 0x49 */
172	"GET EVENT STATUS NOTIFICATION", /* 0x4a */
173	"PAUSE/RESUME", /* 0x4b */
174	"LOG SELECT", /* 0x4c */
175	"LOG SENSE", /* 0x4d */
176	"STOP PLAY/SCAN", /* 0x4e */
177	"", /* 0x4f */
178	"XDWRITE (10)", /* 0x50 */
179	"READ DISC INFORMATION", /* 0x51 */
180	"READ TRACK INFORMATION", /* 0x52 */
181	"RESERVE TRACK", /* 0x53 */
182	"SEND OPC INFORMATION", /* 0x54 */
183	"MODE SELECT (10)", /* 0x55 */
184	"RESERVE (10)", /* 0x56 */
185	"RELEASE (10)", /* 0x57 */
186	"REPAIR TRACK", /* 0x58 */
187	"", /* 0x59 */
188	"MODE SENSE (10)", /* 0x5a */
189	"CLOSE TRACK/SESSION", /* 0x5b */
190	"READ BUFFER CAPACITY", /* 0x5c */
191	"SEND CUE SHEET", /* 0x5d */
192	"PERSISTENT RESERVE IN", /* 0x5e */
193	"PERSISTENT RESERVE OUT", /* 0x5f */
194	"", /* 0x60 */
195	"", /* 0x61 */
196	"", /* 0x62 */
197	"", /* 0x63 */
198	"", /* 0x64 */
199	"", /* 0x65 */
200	"", /* 0x66 */
201	"", /* 0x67 */
202	"", /* 0x68 */
203	"", /* 0x69 */
204	"", /* 0x6a */
205	"", /* 0x6b */
206	"", /* 0x6c */
207	"", /* 0x6d */
208	"", /* 0x6e */
209	"", /* 0x6f */
210	"", /* 0x70 */
211	"", /* 0x71 */
212	"", /* 0x72 */
213	"", /* 0x73 */
214	"", /* 0x74 */
215	"", /* 0x75 */
216	"", /* 0x76 */
217	"", /* 0x77 */
218	"", /* 0x78 */
219	"", /* 0x79 */
220	"", /* 0x7a */
221	"", /* 0x7b */
222	"", /* 0x7c */
223	"", /* 0x7d */
224	"", /* 0x7e */
225	"", /* 0x7f */
226	"WRITE FILEMARKS (16)", /* 0x80 */
227	"READ REVERSE (16)", /* 0x81 */
228	"REGENERATE (16)", /* 0x82 */
229	"EXTENDED COPY", /* 0x83 */
230	"RECEIVE COPY RESULTS", /* 0x84 */
231	"ATA COMMAND PASS THROUGH (16)", /* 0x85 */
232	"ACCESS CONTROL IN", /* 0x86 */
233	"ACCESS CONTROL OUT", /* 0x87 */
234	"READ (16)", /* 0x88 */
235	"", /* 0x89 */
236	"WRITE(16)", /* 0x8a */
237	"", /* 0x8b */
238	"READ ATTRIBUTE", /* 0x8c */
239	"WRITE ATTRIBUTE", /* 0x8d */
240	"WRITE AND VERIFY (16)", /* 0x8e */
241	"VERIFY (16)", /* 0x8f */
242	"PRE-FETCH (16)", /* 0x90 */
243	"SYNCHRONIZE CACHE (16)", /* 0x91 */
244	"LOCK UNLOCK CACHE (16)", /* 0x92 */
245	"WRITE SAME (16)", /* 0x93 */
246	"", /* 0x94 */
247	"", /* 0x95 */
248	"", /* 0x96 */
249	"", /* 0x97 */
250	"", /* 0x98 */
251	"", /* 0x99 */
252	"", /* 0x9a */
253	"", /* 0x9b */
254	"", /* 0x9c */
255	"", /* 0x9d */
256	"SERVICE ACTION IN (16)", /* 0x9e */
257	"SERVICE ACTION OUT (16)", /* 0x9f */
258	"REPORT LUNS", /* 0xa0 */
259	"BLANK", /* 0xa1 */
260	"SEND EVENT", /* 0xa2 */
261	"SEND KEY", /* 0xa3 */
262	"REPORT KEY", /* 0xa4 */
263	"PLAY AUDIO (12)", /* 0xa5 */
264	"LOAD/UNLOAD MEDIUM", /* 0xa6 */
265	"SET READ AHEAD", /* 0xa7 */
266	"READ (12)", /* 0xa8 */
267	"SERVICE ACTION OUT (12)", /* 0xa9 */
268	"WRITE (12)", /* 0xaa */
269	"SERVICE ACTION IN (12)", /* 0xab */
270	"GET PERFORMANCE", /* 0xac */
271	"READ DVD STRUCTURE", /* 0xad */
272	"WRITE AND VERIFY (12)", /* 0xae */
273	"VERIFY (12)", /* 0xaf */
274	"SEARCH DATA HIGH (12)", /* 0xb0 */
275	"SEARCH DATA EQUAL (12)", /* 0xb1 */
276	"SEARCH DATA LOW (12)", /* 0xb2 */
277	"SET LIMITS (12)", /* 0xb3 */
278	"READ ELEMENT STATUS ATTACHED", /* 0xb4 */
279	"REQUEST VOLUME ELEMENT ADDRESS", /* 0xb5 */
280	"SET STREAMING", /* 0xb6 */
281	"READ DEFECT DATA (12)", /* 0xb7 */
282	"READ ELEMENT STATUS", /* 0xb8 */
283	"READ CD MSF", /* 0xb9 */
284	"SCAN", /* 0xba */
285	"SET CD SPEED", /* 0xbb */
286	"SPARE (IN)", /* 0xbc */
287	"MECHANISM STATUS", /* 0xbd */
288	"READ CD", /* 0xbe */
289	"SEND DVD STRUCTURE", /* 0xbf */
290	"", /* 0xc0 */
291	"", /* 0xc1 */
292	"", /* 0xc2 */
293	"", /* 0xc3 */
294	"", /* 0xc4 */
295	"", /* 0xc5 */
296	"", /* 0xc6 */
297	"", /* 0xc7 */
298	"", /* 0xc8 */
299	"", /* 0xc9 */
300	"", /* 0xca */
301	"", /* 0xcb */
302	"", /* 0xcc */
303	"", /* 0xcd */
304	"", /* 0xce */
305	"", /* 0xcf */
306	"", /* 0xd0 */
307	"", /* 0xd1 */
308	"", /* 0xd2 */
309	"", /* 0xd3 */
310	"", /* 0xd4 */
311	"", /* 0xd5 */
312	"", /* 0xd6 */
313	"", /* 0xd7 */
314	"", /* 0xd8 */
315	"", /* 0xd9 */
316	"", /* 0xda */
317	"", /* 0xdb */
318	"", /* 0xdc */
319	"", /* 0xdd */
320	"", /* 0xde */
321	"", /* 0xdf */
322	"", /* 0xe0 */
323	"", /* 0xe1 */
324	"", /* 0xe2 */
325	"", /* 0xe3 */
326	"", /* 0xe4 */
327	"", /* 0xe5 */
328	"", /* 0xe6 */
329	"", /* 0xe7 */
330	"", /* 0xe8 */
331	"", /* 0xe9 */
332	"", /* 0xea */
333	"", /* 0xeb */
334	"", /* 0xec */
335	"", /* 0xed */
336	"", /* 0xee */
337	"", /* 0xef */
338	"", /* 0xf0 */
339	"", /* 0xf1 */
340	"", /* 0xf2 */
341	"", /* 0xf3 */
342	"", /* 0xf4 */
343	"", /* 0xf5 */
344	"", /* 0xf6 */
345	"", /* 0xf7 */
346	"", /* 0xf8 */
347	"", /* 0xf9 */
348	"", /* 0xfa */
349	"", /* 0xfb */
350	"", /* 0xfc */
351	"", /* 0xfd */
352	"", /* 0xfe */
353	"" /* 0xff */
354	};
355	#endif /* DEBUG */
356
357	/* Mode page codes for mode sense/select commands. */
358	#define SCSI_MODEPAGE_ERROR_RECOVERY 0x01
359	#define SCSI_MODEPAGE_WRITE_PARAMETER 0x05
360	#define SCSI_MODEPAGE_CD_STATUS 0x2a
361
362
363	/* Page control codes. */
364	#define SCSI_PAGECONTROL_CURRENT 0x00
365	#define SCSI_PAGECONTROL_CHANGEABLE 0x01
366	#define SCSI_PAGECONTROL_DEFAULT 0x02
367	#define SCSI_PAGECONTROL_SAVED 0x03
368
369
370	#define SCSI_SENSE_NONE 0
371	#define SCSI_SENSE_NOT_READY 2
372	#define SCSI_SENSE_MEDIUM_ERROR 3
373	#define SCSI_SENSE_ILLEGAL_REQUEST 5
374	#define SCSI_SENSE_UNIT_ATTENTION 6
375
376
377	#define SCSI_ASC_NONE 0x00
378	#define SCSI_ASC_READ_ERROR 0x11
379	#define SCSI_ASC_ILLEGAL_OPCODE 0x20
380	#define SCSI_ASC_LOGICAL_BLOCK_OOR 0x21
381	#define SCSI_ASC_INV_FIELD_IN_CMD_PACKET 0x24
382	#define SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
383	#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3a
384	#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
385	#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
386
387
388	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/scsi.h@ 5285

Download in other formats: