err.h@ 35519

Last change on this file since 35519 was 35513, checked in by vboxsync, 14 years ago
DBGFReg: long double -> RTFLOAT80U2. Get floating point registers and stuff.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 76.8 KB

Line
1	/** @file
2	* VirtualBox Status Codes.
3	*/
4
5	/*
6	* Copyright (C) 2006-2010 Oracle Corporation
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License (GPL) as published by the Free Software
12	* Foundation, in version 2 as it comes in the "COPYING" file of the
13	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* The contents of this file may alternatively be used under the terms
17	* of the Common Development and Distribution License Version 1.0
18	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19	* VirtualBox OSE distribution, in which case the provisions of the
20	* CDDL are applicable instead of those of the GPL.
21	*
22	* You may elect to license modified versions of this file under the
23	* terms and conditions of either the GPL or the CDDL or both.
24	*/
25
26	#ifndef ___VBox_err_h
27	#define ___VBox_err_h
28
29	#include <VBox/cdefs.h>
30	#include <iprt/err.h>
31
32
33	/** @defgroup grp_err Error Codes
34	* @{
35	*/
36
37	/* SED-START */
38
39	/** @name Misc. Status Codes
40	* @{
41	*/
42	/** Failed to allocate VM memory. */
43	#define VERR_NO_VM_MEMORY (-1000)
44	/** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */
45	#define VERR_DONT_PANIC (-1001)
46	/** Unsupported CPU. */
47	#define VERR_UNSUPPORTED_CPU (-1002)
48	/** Unsupported CPU mode. */
49	#define VERR_UNSUPPORTED_CPU_MODE (-1003)
50	/** Page not present. */
51	#define VERR_PAGE_NOT_PRESENT (-1004)
52	/** Invalid/Corrupted configuration file. */
53	#define VERR_CFG_INVALID_FORMAT (-1005)
54	/** No configuration value exists. */
55	#define VERR_CFG_NO_VALUE (-1006)
56	/** Selector not present. */
57	#define VERR_SELECTOR_NOT_PRESENT (-1007)
58	/** Not code selector. */
59	#define VERR_NOT_CODE_SELECTOR (-1008)
60	/** Not data selector. */
61	#define VERR_NOT_DATA_SELECTOR (-1009)
62	/** Out of selector bounds. */
63	#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
64	/** Invalid selector. Usually beyond table limits. */
65	#define VERR_INVALID_SELECTOR (-1011)
66	/** Invalid requested privilegde level. */
67	#define VERR_INVALID_RPL (-1012)
68	/** PML4 entry not present. */
69	#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
70	/** Page directory pointer not present. */
71	#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
72	/** Raw mode doesn't support SMP. */
73	#define VERR_RAW_MODE_INVALID_SMP (-1015)
74	/** Invalid VM handle. */
75	#define VERR_INVALID_VM_HANDLE (-1016)
76	/** Invalid VM handle. */
77	#define VERR_INVALID_VMCPU_HANDLE (-1017)
78	/** Invalid Virtual CPU ID. */
79	#define VERR_INVALID_CPU_ID (-1018)
80	/** Too many VCPUs. */
81	#define VERR_TOO_MANY_CPUS (-1019)
82	/** The service was disabled on the host.
83	* Returned by pfnInit in VBoxService to indicated a non-fatal error that
84	* should results in the particular service being disabled. */
85	#define VERR_SERVICE_DISABLED (-1020)
86	/** @} */
87
88
89	/** @name Execution Monitor/Manager (EM) Status Codes
90	*
91	* The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
92	* are of vital importance. The lower the number the higher importance
93	* as a scheduling instruction.
94	* @{
95	*/
96	/** First scheduling related status code. */
97	#define VINF_EM_FIRST 1100
98	/** Indicating that the VM is being terminated and that the the execution
99	* shall stop. */
100	#define VINF_EM_TERMINATE 1100
101	/** Hypervisor code was stepped.
102	* EM will first send this to the debugger, and if the issue isn't
103	* resolved there it will enter guru meditation. */
104	#define VINF_EM_DBG_HYPER_STEPPED 1101
105	/** Hit a breakpoint in the hypervisor code,
106	* EM will first send this to the debugger, and if the issue isn't
107	* resolved there it will enter guru meditation. */
108	#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
109	/** Hit a possible assertion in the hypervisor code,
110	* EM will first send this to the debugger, and if the issue isn't
111	* resolved there it will enter guru meditation. */
112	#define VINF_EM_DBG_HYPER_ASSERTION 1103
113	/** Indicating that the VM should be suspended for debugging because
114	* the developer wants to inspect the VM state. */
115	#define VINF_EM_DBG_STOP 1105
116	/** Indicating success single stepping and that EM should report that
117	* event to the debugger. */
118	#define VINF_EM_DBG_STEPPED 1106
119	/** Indicating that a breakpoint was hit and that EM should notify the debugger
120	* and in the event there is no debugger fail fatally. */
121	#define VINF_EM_DBG_BREAKPOINT 1107
122	/** Indicating that EM should single step an instruction.
123	* The instruction is stepped in the current execution mode (RAW/REM). */
124	#define VINF_EM_DBG_STEP 1108
125	/** Indicating that the VM is being turned off and that the EM should
126	* exit to the VM awaiting the destruction request. */
127	#define VINF_EM_OFF 1109
128	/** Indicating that the VM has been suspended and that the the thread
129	* should wait for request telling it what to do next. */
130	#define VINF_EM_SUSPEND 1110
131	/** Indicating that the VM has been reset and that scheduling goes
132	* back to startup defaults. */
133	#define VINF_EM_RESET 1111
134	/** Indicating that the VM has executed a halt instruction and that
135	* the emulation thread should wait for an interrupt before resuming
136	* execution. */
137	#define VINF_EM_HALT 1112
138	/** Indicating that the VM has been resumed and that the thread should
139	* start executing. */
140	#define VINF_EM_RESUME 1113
141	/** Indicating that we've got an out-of-memory condition and that we need
142	* to take the appropriate actions to deal with this.
143	* @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
144	* VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
145	* vital to correctly operating the VM. Also, they can't normally occur together
146	* with an out-of-memory condition, and even if that should happen the condition
147	* will be rediscovered before executing any more code. */
148	#define VINF_EM_NO_MEMORY 1114
149	/** The fatal variant of VINF_EM_NO_MEMORY. */
150	#define VERR_EM_NO_MEMORY (-1114)
151	/** Indicating that a rescheduling to recompiled execution.
152	* Typically caused by raw-mode executing code which is difficult/slow
153	* to virtualize rawly.
154	* @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
155	#define VINF_EM_RESCHEDULE_REM 1115
156	/** Indicating that a rescheduling to vmx-mode execution.
157	* Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
158	#define VINF_EM_RESCHEDULE_HWACC 1116
159	/** Indicating that a rescheduling to raw-mode execution.
160	* Typically caused by REM detecting that raw-mode execution is possible.
161	* @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
162	#define VINF_EM_RESCHEDULE_RAW 1117
163	/** Indicating that a rescheduling now is required. Typically caused by
164	* interrupts having changed the EIP. */
165	#define VINF_EM_RESCHEDULE 1118
166	/** PARAV call */
167	#define VINF_EM_RESCHEDULE_PARAV 1119
168	/** Go back into wait for SIPI mode */
169	#define VINF_EM_WAIT_SIPI 1120
170	/** Last scheduling related status code. (inclusive) */
171	#define VINF_EM_LAST 1120
172
173	/** Reason for leaving GC: Guest trap which couldn't be handled in GC.
174	* The trap is generally forwarded to the REM and executed there. */
175	#define VINF_EM_RAW_GUEST_TRAP 1121
176	/** Reason for leaving GC: Interrupted by external interrupt.
177	* The interrupt needed to be handled by the host OS. */
178	#define VINF_EM_RAW_INTERRUPT 1122
179	/** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code.
180	* The interrupt needed to be handled by the host OS and hypervisor execution must be
181	* resumed. VM state is not complete at this point. */
182	#define VINF_EM_RAW_INTERRUPT_HYPER 1123
183	/** Reason for leaving GC: A Ring switch was attempted.
184	* Normal cause of action is to execute this in REM. */
185	#define VINF_EM_RAW_RING_SWITCH 1124
186	/** Reason for leaving GC: A Ring switch was attempted using software interrupt.
187	* Normal cause of action is to execute this in REM. */
188	#define VINF_EM_RAW_RING_SWITCH_INT 1125
189	/** Reason for leaving GC: A privileged instruction was attempted executed.
190	* Normal cause of action is to execute this in REM. */
191	#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
192
193	/** Reason for leaving GC: Emulate instruction. */
194	#define VINF_EM_RAW_EMULATE_INSTR 1127
195	/** Reason for leaving GC: Unhandled TSS write.
196	* Recompiler gets control. */
197	#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
198	/** Reason for leaving GC: Unhandled LDT write.
199	* Recompiler gets control. */
200	#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
201	/** Reason for leaving GC: Unhandled IDT write.
202	* Recompiler gets control. */
203	#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
204	/** Reason for leaving GC: Unhandled GDT write.
205	* Recompiler gets control. */
206	#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
207	/** Reason for leaving GC: Unhandled Page Directory write.
208	* Recompiler gets control. */
209	#define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1132
210	/** Reason for leaving GC: jump inside generated patch jump.
211	* Fatal error. */
212	#define VERR_EM_RAW_PATCH_CONFLICT (-1133)
213	/** Reason for leaving GC: Hlt instruction.
214	* Recompiler gets control. */
215	#define VINF_EM_RAW_EMULATE_INSTR_HLT 1134
216	/** Reason for leaving GC: Ring-3 operation pending. */
217	#define VINF_EM_RAW_TO_R3 1135
218	/** Reason for leaving GC: Timer pending. */
219	#define VINF_EM_RAW_TIMER_PENDING 1136
220	/** Reason for leaving GC: Interrupt pending (guest). */
221	#define VINF_EM_RAW_INTERRUPT_PENDING 1137
222	/** Reason for leaving GC: Encountered a stale selector. */
223	#define VINF_EM_RAW_STALE_SELECTOR 1138
224	/** Reason for leaving GC: The IRET resuming guest code trapped. */
225	#define VINF_EM_RAW_IRET_TRAP 1139
226	/** Reason for leaving GC: Emulate (MM)IO intensive code in the recompiler. */
227	#define VINF_EM_RAW_EMULATE_IO_BLOCK 1140
228	/** The interpreter was unable to deal with the instruction at hand. */
229	#define VERR_EM_INTERPRETER (-1148)
230	/** Internal EM error caused by an unknown warning or informational status code. */
231	#define VERR_EM_INTERNAL_ERROR (-1149)
232	/** Pending VM request packet. */
233	#define VINF_EM_PENDING_REQUEST 1150
234	/** Start instruction stepping (debug only). */
235	#define VINF_EM_RAW_EMULATE_DBG_STEP 1151
236	/** Patch TPR access instruction. */
237	#define VINF_EM_HWACCM_PATCH_TPR_INSTR 1152
238	/** @} */
239
240
241	/** @name Debugging Facility (DBGF) DBGF Status Codes
242	* @{
243	*/
244	/** The function called requires the caller to be attached as a
245	* debugger to the VM. */
246	#define VERR_DBGF_NOT_ATTACHED (-1200)
247	/** Someone (including the caller) was already attached as
248	* debugger to the VM. */
249	#define VERR_DBGF_ALREADY_ATTACHED (-1201)
250	/** Tried to hald a debugger which was already halted.
251	* (This is a warning and not an error.) */
252	#define VWRN_DBGF_ALREADY_HALTED 1202
253	/** The DBGF has no more free breakpoint slots. */
254	#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
255	/** The DBGF couldn't find the specified breakpoint. */
256	#define VERR_DBGF_BP_NOT_FOUND (-1204)
257	/** Attempted to enabled a breakpoint which was already enabled. */
258	#define VINF_DBGF_BP_ALREADY_ENABLED 1205
259	/** Attempted to disabled a breakpoint which was already disabled. */
260	#define VINF_DBGF_BP_ALREADY_DISABLED 1206
261	/** The breakpoint already exists. */
262	#define VINF_DBGF_BP_ALREADY_EXIST 1207
263	/** The byte string was not found. */
264	#define VERR_DBGF_MEM_NOT_FOUND (-1208)
265	/** The OS was not detected. */
266	#define VERR_DBGF_OS_NOT_DETCTED (-1209)
267	/** The OS was not detected. */
268	#define VINF_DBGF_OS_NOT_DETCTED 1209
269	/** The specified register was not found. */
270	#define VERR_DBGF_REGISTER_NOT_FOUND (-1210)
271	/** The value was truncated to fit.
272	* For queries this means that the register is wider than the queried value.
273	* For setters this means that the value is wider than the register. */
274	#define VINF_DBGF_TRUNCATED_REGISTER 1211
275	/** The value was zero extended to fit.
276	* For queries this means that the register is narrower than the queried value.
277	* For setters this means that the value is narrower than the register. */
278	#define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212
279	/** The requested type conversion was not supported. */
280	#define VERR_DBGF_UNSUPPORTED_CAST (-1213)
281	/** The register is read-only and cannot be modified. */
282	#define VERR_DBGF_READ_ONLY_REGISTER (-1214)
283	/** @} */
284
285
286	/** @name Patch Manager (PATM) Status Codes
287	* @{
288	*/
289	/** Non fatal Patch Manager analysis phase warning */
290	#define VWRN_CONTINUE_ANALYSIS 1400
291	/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
292	#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
293	/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
294	#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
295	/** Patch installation refused (patch too complex or unsupported instructions ) */
296	#define VERR_PATCHING_REFUSED (-1401)
297	/** Unable to find patch */
298	#define VERR_PATCH_NOT_FOUND (-1402)
299	/** Patch disabled */
300	#define VERR_PATCH_DISABLED (-1403)
301	/** Patch enabled */
302	#define VWRN_PATCH_ENABLED 1404
303	/** Patch was already disabled */
304	#define VERR_PATCH_ALREADY_DISABLED (-1405)
305	/** Patch was already enabled */
306	#define VERR_PATCH_ALREADY_ENABLED (-1406)
307	/** Patch was removed. */
308	#define VWRN_PATCH_REMOVED 1407
309
310	/** Reason for leaving GC: \#GP with EIP pointing to patch code. */
311	#define VINF_PATM_PATCH_TRAP_GP 1408
312	/** First leave GC code. */
313	#define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP
314	/** Reason for leaving GC: \#PF with EIP pointing to patch code. */
315	#define VINF_PATM_PATCH_TRAP_PF 1409
316	/** Reason for leaving GC: int3 with EIP pointing to patch code. */
317	#define VINF_PATM_PATCH_INT3 1410
318	/** Reason for leaving GC: \#PF for monitored patch page. */
319	#define VINF_PATM_CHECK_PATCH_PAGE 1411
320	/** Reason for leaving GC: duplicate instruction called at current eip. */
321	#define VINF_PATM_DUPLICATE_FUNCTION 1412
322	/** Execute one instruction with the recompiler */
323	#define VINF_PATCH_EMULATE_INSTR 1413
324	/** Reason for leaving GC: attempt to patch MMIO write. */
325	#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
326	/** Reason for leaving GC: attempt to patch MMIO read. */
327	#define VINF_PATM_HC_MMIO_PATCH_READ 1415
328	/** Reason for leaving GC: pending irq after iret that sets IF. */
329	#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
330	/** Last leave GC code. */
331	#define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
332
333	/** No conflicts to resolve */
334	#define VERR_PATCH_NO_CONFLICT (-1425)
335	/** Detected unsafe code for patching */
336	#define VERR_PATM_UNSAFE_CODE (-1426)
337	/** Terminate search branch */
338	#define VWRN_PATCH_END_BRANCH 1427
339	/** Already patched */
340	#define VERR_PATM_ALREADY_PATCHED (-1428)
341	/** Spinlock detection failed. */
342	#define VINF_PATM_SPINLOCK_FAILED (1429)
343	/** Continue execution after patch trap. */
344	#define VINF_PATCH_CONTINUE (1430)
345
346	/** @} */
347
348
349	/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
350	* @{
351	*/
352	/** Trap not handled */
353	#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
354	/** Patch installed */
355	#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
356	/** Page record not found */
357	#define VWRN_CSAM_PAGE_NOT_FOUND 1502
358	/** Reason for leaving GC: CSAM wants perform a task in ring-3. */
359	#define VINF_CSAM_PENDING_ACTION 1503
360	/** @} */
361
362
363	/** @name Page Monitor/Manager (PGM) Status Codes
364	* @{
365	*/
366	/** Attempt to create a GC mapping which conflicts with an existing mapping. */
367	#define VERR_PGM_MAPPING_CONFLICT (-1600)
368	/** The physical handler range has no corresponding RAM range.
369	* If this is MMIO, see todo above the return. If not MMIO, then it's
370	* someone else's fault... */
371	#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
372	/** Attempt to register an access handler for a virtual range of which a part
373	* was already handled. */
374	#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
375	/** Attempt to register an access handler for a physical range of which a part
376	* was already handled. */
377	#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
378	/** Invalid page directory specified to PGM. */
379	#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
380	/** Invalid GC physical address. */
381	#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
382	/** Invalid GC physical range. Usually used when a specified range crosses
383	* a RAM region boundary. */
384	#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
385	/** Specified access handler was not found. */
386	#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
387	/** Attempt to register a RAM range of which parts are already
388	* covered by existing RAM ranges. */
389	#define VERR_PGM_RAM_CONFLICT (-1608)
390	/** Failed to add new mappings because the current mappings are fixed
391	* in guest os memory. */
392	#define VERR_PGM_MAPPINGS_FIXED (-1609)
393	/** Failed to fix mappings because of a conflict with the intermediate code. */
394	#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
395	/** Failed to fix mappings because a mapping rejected the address. */
396	#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
397	/** Failed to fix mappings because the proposed memory area was to small. */
398	#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
399	/** Reason for leaving GC: The urge to syncing CR3. */
400	#define VINF_PGM_SYNC_CR3 1613
401	/** Page not marked for dirty bit tracking */
402	#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
403	/** Page fault caused by dirty bit tracking; corrected */
404	#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
405	/** Go ahead with the default Read/Write operation.
406	* This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read\|Write]
407	* routine do the reading/writing. */
408	#define VINF_PGM_HANDLER_DO_DEFAULT 1616
409	/** The paging mode of the host is not supported yet. */
410	#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
411	/** The physical guest page is a reserved/mmio page and does not have any HC address. */
412	#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
413	/** No page directory available for the hypervisor. */
414	#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
415	/** The shadow page pool was flushed.
416	* This means that a global CR3 sync was flagged. Anyone receiving this kind of status
417	* will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
418	#define VERR_PGM_POOL_FLUSHED (-1620)
419	/** The shadow page pool was cleared.
420	* This is a error code internal to the shadow page pool, it will be
421	* converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
422	#define VERR_PGM_POOL_CLEARED (-1621)
423	/** The returned shadow page is cached. */
424	#define VINF_PGM_CACHED_PAGE 1622
425	/** Returned by handler registration, modification and deregistration
426	* when the shadow PTs could be updated because the guest page
427	* aliased or/and mapped by multiple PTs. */
428	#define VINF_PGM_GCPHYS_ALIASED 1623
429	/** Reason for leaving GC: Paging mode changed.
430	* PGMChangeMode() uses this to force a switch to HC so it can safely
431	* deal with a mode switch.
432	*/
433	#define VINF_PGM_CHANGE_MODE 1624
434	/** SyncPage modified the PDE.
435	* This is an internal status code used to communicate back to the \#PF handler
436	* that the PDE was (probably) marked not-present and it should restart the instruction. */
437	#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
438	/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
439	#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
440	/** Conflict between the core memory and the intermediate paging context, try again.
441	* There are some very special conditions applying to the intermediate paging context
442	* (used during the world switches), and some times we continuously run into these
443	* when asking the host kernel for memory during VM init. Let us know if you run into
444	* this and we'll adjust the code so it tries harder to avoid it.
445	*/
446	#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
447	/** The shadow paging mode is not supported yet. */
448	#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
449	/** The dynamic mapping cache for physical memory failed. */
450	#define VERR_PGM_DYNMAP_FAILED (-1629)
451	/** The auto usage cache for the dynamic mapping set is full. */
452	#define VERR_PGM_DYNMAP_FULL_SET (-1630)
453	/** The initialization of the dynamic mapping cache failed. */
454	#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
455	/** The expanding of the dynamic mapping cache failed. */
456	#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
457	/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
458	#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
459	/** Catch any access and route it thru PGM. */
460	#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
461	/** Catch write access and route it thru PGM. */
462	#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
463	/** No CR3 root shadow page table.. */
464	#define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636)
465	/** Trying to free a page with an invalid Page ID. */
466	#define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637)
467	/** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */
468	#define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638)
469	/** Trying to free a page that isn't RAM. */
470	#define VERR_PGM_PHYS_NOT_RAM (-1639)
471	/** Not ROM page. */
472	#define VERR_PGM_PHYS_NOT_ROM (-1640)
473	/** Not MMIO page. */
474	#define VERR_PGM_PHYS_NOT_MMIO (-1641)
475	/** Not MMIO2 page. */
476	#define VERR_PGM_PHYS_NOT_MMIO2 (-1642)
477	/** Already aliased to a different page. */
478	#define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643)
479	/** Already aliased to the same page. */
480	#define VINF_PGM_HANDLER_ALREADY_ALIASED (1643)
481	/** PGM pool flush pending - return to ring 3. */
482	#define VINF_PGM_POOL_FLUSH_PENDING (1644)
483	/** Unable to use the range for a large page. */
484	#define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645)
485	/** Don't mess around with ballooned pages. */
486	#define VERR_PGM_PHYS_PAGE_BALLOONED (-1646)
487	/** Shared module already registered. */
488	#define VINF_PGM_SHARED_MODULE_ALREADY_REGISTERED (1647)
489	/** Shared module not found. */
490	#define VERR_PGM_SHARED_MODULE_NOT_FOUND (-1648)
491	/** Shared module different from previously registered module. */
492	#define VINF_PGM_SHARED_MODULE_COLLISION (1649)
493	/** Inconsistent local and global registration records. */
494	#define VERR_PGM_SHARED_MODULE_REGISTRATION_INCONSISTENCY (-1650)
495	/** @} */
496
497
498	/** @name Memory Monitor (MM) Status Codes
499	* @{
500	*/
501	/** Attempt to register a RAM range of which parts are already
502	* covered by existing RAM ranges. */
503	#define VERR_MM_RAM_CONFLICT (-1700)
504	/** Hypervisor memory allocation failed. */
505	#define VERR_MM_HYPER_NO_MEMORY (-1701)
506	/** @} */
507
508
509	/** @name CPU Monitor (CPUM) Status Codes
510	* @{
511	*/
512	/** The caller shall raise an \#GP(0) exception. */
513	#define VERR_CPUM_RAISE_GP_0 (-1750)
514	/** @} */
515
516
517	/** @name Save State Manager (SSM) Status Codes
518	* @{
519	*/
520	/** The specified data unit already exist. */
521	#define VERR_SSM_UNIT_EXISTS (-1800)
522	/** The specified data unit wasn't found. */
523	#define VERR_SSM_UNIT_NOT_FOUND (-1801)
524	/** The specified data unit wasn't owned by caller. */
525	#define VERR_SSM_UNIT_NOT_OWNER (-1802)
526
527	/** General saved state file integrity error. */
528	#define VERR_SSM_INTEGRITY (-1810)
529	/** The saved state file magic was not recognized. */
530	#define VERR_SSM_INTEGRITY_MAGIC (-1811)
531	/** The saved state file version is not supported. */
532	#define VERR_SSM_INTEGRITY_VERSION (-1812)
533	/** The saved state file size didn't match the one in the header. */
534	#define VERR_SSM_INTEGRITY_SIZE (-1813)
535	/** The CRC of the saved state file did not match. */
536	#define VERR_SSM_INTEGRITY_CRC (-1814)
537	/** The machine uuid field wasn't null. */
538	#define VERR_SMM_INTEGRITY_MACHINE (-1815)
539	/** Saved state header integrity error. */
540	#define VERR_SSM_INTEGRITY_HEADER (-1816)
541	/** Unit header integrity error. */
542	#define VERR_SSM_INTEGRITY_UNIT (-1817)
543	/** Invalid unit magic (internal data tag). */
544	#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818)
545	/** The file contained a data unit which no-one wants. */
546	#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819)
547	/** Incorrect version numbers in the header. */
548	#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820)
549	/** Footer integrity error. */
550	#define VERR_SSM_INTEGRITY_FOOTER (-1821)
551	/** Record header integrity error. */
552	#define VERR_SSM_INTEGRITY_REC_HDR (-1822)
553	/** Termination record integrity error. */
554	#define VERR_SSM_INTEGRITY_REC_TERM (-1823)
555	/** Termination record CRC mismatch. */
556	#define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824)
557	/** Decompression interity error. */
558	#define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825)
559	/** Saved state directory iintegrity error. */
560	#define VERR_SSM_INTEGRITY_DIR (-1826)
561	/** The saved state directory magic is wrong. */
562	#define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827)
563
564	/** A data unit in the saved state file was defined but didn't any
565	* routine for processing it. */
566	#define VERR_SSM_NO_LOAD_EXEC (-1830)
567	/** A restore routine attempted to load more data then the unit contained. */
568	#define VERR_SSM_LOADED_TOO_MUCH (-1831)
569	/** Not in the correct state for the attempted operation. */
570	#define VERR_SSM_INVALID_STATE (-1832)
571	/** Not in the correct state for the attempted operation. */
572	#define VERR_SSM_LOADED_TOO_LITTLE (-1833)
573
574	/** Unsupported data unit version.
575	* A SSM user returns this if it doesn't know the u32Version. */
576	#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840)
577	/** The format of a data unit has changed.
578	* A SSM user returns this if it's not able to read the format for
579	* other reasons than u32Version. */
580	#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841)
581	/** The CPUID instruction returns different information when loading than when saved.
582	* Normally caused by hardware changes on the host, but could also be caused by
583	* changes in the BIOS setup. */
584	#define VERR_SSM_LOAD_CPUID_MISMATCH (-1842)
585	/** The RAM size differes between the saved state and the VM config. */
586	#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843)
587	/** The state doesn't match the VM configuration in one or another way.
588	* (There are certain PCI reconfiguration which the OS could potentially
589	* do which can cause this problem. Check this out when it happens.) */
590	#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844)
591	/** The virtual clock frequency differs too much.
592	* The clock source for the virtual time isn't reliable or the code have changed. */
593	#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845)
594	/** A timeout occurred while waiting for async IDE operations to finish. */
595	#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846)
596	/** One of the structure magics was wrong. */
597	#define VERR_SSM_STRUCTURE_MAGIC (-1847)
598	/** The data in the saved state doesn't conform to expectations. */
599	#define VERR_SSM_UNEXPECTED_DATA (-1848)
600	/** Trying to read a 64-bit guest physical address into a 32-bit variable. */
601	#define VERR_SSM_GCPHYS_OVERFLOW (-1849)
602	/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
603	#define VERR_SSM_GCPTR_OVERFLOW (-1850)
604	/** Vote for another pass. */
605	#define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851
606	/** Vote for done tell SSM not to call again until the final pass. */
607	#define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852
608	/** Vote for giving up. */
609	#define VERR_SSM_VOTE_FOR_GIVING_UP (-1853)
610	/** Don't call again until the final pass. */
611	#define VINF_SSM_DONT_CALL_AGAIN 1854
612	/** Giving up a live snapshot/teleportation attempt because of too many
613	* passes. */
614	#define VERR_SSM_TOO_MANY_PASSES (-1855)
615	/** Giving up a live snapshot/teleportation attempt because the state grew to
616	* big. */
617	#define VERR_SSM_STATE_GREW_TOO_BIG (-1856)
618	/** Giving up a live snapshot attempt because we're low on disk space. */
619	#define VERR_SSM_LOW_ON_DISK_SPACE (-1857)
620	/** The operation was cancelled. */
621	#define VERR_SSM_CANCELLED (-1858)
622	/** Nothing that can be cancelled. */
623	#define VERR_SSM_NO_PENDING_OPERATION (-1859)
624	/** The operation has already been cancelled. */
625	#define VERR_SSM_ALREADY_CANCELLED (-1860)
626	/** The machine was powered off while saving. */
627	#define VERR_SSM_LIVE_POWERED_OFF (-1861)
628	/** The live snapshot/teleportation operation was aborted because of a guru
629	* meditation. */
630	#define VERR_SSM_LIVE_GURU_MEDITATION (-1862)
631	/** The live snapshot/teleportation operation was aborted because of a fatal
632	* runtime error. */
633	#define VERR_SSM_LIVE_FATAL_ERROR (-1863)
634	/** The VM was suspended before or while saving, don't resume execution. */
635	#define VINF_SSM_LIVE_SUSPENDED 1864
636	/** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the
637	* extended API. */
638	#define VERR_SSM_FIELD_COMPLEX (-1864)
639	/** Invalid size of a SSM field with the specified transformation. */
640	#define VERR_SSM_FIELD_INVALID_SIZE (-1865)
641	/** The specified field is outside the structure. */
642	#define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866)
643	/** The field does not follow immediately the previous one. */
644	#define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867)
645	/** The field contains an invalid callback or transformation index. */
646	#define VERR_SSM_FIELD_INVALID_CALLBACK (-1868)
647	/** The field contains an invalid padding size. */
648	#define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869)
649	/** The field contains a value that is out of range. */
650	#define VERR_SSM_FIELD_INVALID_VALUE (-1870)
651	/** Generic stream error. */
652	#define VERR_SSM_STREAM_ERROR (-1871)
653
654	/** @} */
655
656
657	/** @name Virtual Machine (VM) Status Codes
658	* @{
659	*/
660	/** The specified at reset handler wasn't found. */
661	#define VERR_VM_ATRESET_NOT_FOUND (-1900)
662	/** Invalid VM request type.
663	* For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
664	* all the other occurrences it means indicates corruption, broken logic, or stupid
665	* interface user. */
666	#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
667	/** Invalid VM request state.
668	* The state of the request packet was not the expected and accepted one(s). Either
669	* the interface user screwed up, or we've got corruption/broken logic. */
670	#define VERR_VM_REQUEST_STATE (-1902)
671	/** Invalid VM request packet.
672	* One or more of the the VM controlled packet members didn't contain the correct
673	* values. Some thing's broken. */
674	#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
675	/** The status field has not been updated yet as the request is still
676	* pending completion. Someone queried the iStatus field before the request
677	* has been fully processed. */
678	#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
679	/** The request has been freed, don't read the status now.
680	* Someone is reading the iStatus field of a freed request packet. */
681	#define VERR_VM_REQUEST_STATUS_FREED (-1905)
682	/** A VM api requiring EMT was called from another thread.
683	* Use the VMR3ReqCall() apis to call it! */
684	#define VERR_VM_THREAD_NOT_EMT (-1906)
685	/** The VM state was invalid for the requested operation.
686	* Go check the 'VM Statechart Diagram.gif'. */
687	#define VERR_VM_INVALID_VM_STATE (-1907)
688	/** The support driver is not installed.
689	* On linux, open returned ENOENT. */
690	#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
691	/** The support driver is not accessible.
692	* On linux, open returned EPERM. */
693	#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
694	/** Was not able to load the support driver.
695	* On linux, open returned ENODEV. */
696	#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
697	/** Was not able to open the support driver.
698	* Generic open error used when none of the other ones fit. */
699	#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
700	/** The installed support driver doesn't match the version of the user. */
701	#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
702	/** Saving the VM state is temporarily not allowed. Try again later. */
703	#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
704	/** An EMT called an API which cannot be called on such a thread. */
705	#define VERR_VM_THREAD_IS_EMT (-1914)
706	/** @} */
707
708
709	/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
710	* @{
711	*/
712	/** Successful completion of operation (mapped to generic iprt status code). */
713	#define VINF_VRDP_SUCCESS VINF_SUCCESS
714	/** VRDP transport operation timed out (mapped to generic iprt status code). */
715	#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
716
717	/** Unsupported ISO protocol feature */
718	#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
719	/** Security (en/decryption) engine error */
720	#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
721	/** VRDP protocol violation */
722	#define VERR_VRDP_PROTOCOL_ERROR (-2002)
723	/** Unsupported VRDP protocol feature */
724	#define VERR_VRDP_NOT_SUPPORTED (-2003)
725	/** VRDP protocol violation, client sends less data than expected */
726	#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
727	/** Internal error, VRDP packet is in wrong operation mode */
728	#define VERR_VRDP_INVALID_MODE (-2005)
729	/** Memory allocation failed */
730	#define VERR_VRDP_NO_MEMORY (-2006)
731	/** Client has been rejected */
732	#define VERR_VRDP_ACCESS_DENIED (-2007)
733	/** VRPD receives a packet that is not supported */
734	#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
735	/** VRDP script allowed the packet to be processed further */
736	#define VINF_VRDP_PROCESS_PDU 2009
737	/** VRDP script has completed its task */
738	#define VINF_VRDP_OPERATION_COMPLETED 2010
739	/** VRDP thread has started OK and will run */
740	#define VINF_VRDP_THREAD_STARTED 2011
741	/** Framebuffer is resized, terminate send bitmap procedure */
742	#define VINF_VRDP_RESIZE_REQUESTED 2012
743	/** Output can be enabled for the client. */
744	#define VINF_VRDP_OUTPUT_ENABLE 2013
745	/** @} */
746
747
748	/** @name Configuration Manager (CFGM) Status Codes
749	* @{
750	*/
751	/** The integer value was too big for the requested representation. */
752	#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
753	/** Child node was not found. */
754	#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
755	/** Path to child node was invalid (i.e. empty). */
756	#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
757	/** Value not found. */
758	#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
759	/** No parent node specified. */
760	#define VERR_CFGM_NO_PARENT (-2104)
761	/** No node was specified. */
762	#define VERR_CFGM_NO_NODE (-2105)
763	/** The value is not an integer. */
764	#define VERR_CFGM_NOT_INTEGER (-2106)
765	/** The value is not a zero terminated character string. */
766	#define VERR_CFGM_NOT_STRING (-2107)
767	/** The value is not a byte string. */
768	#define VERR_CFGM_NOT_BYTES (-2108)
769	/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
770	#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
771	/** The path of a new node contained slashs or was empty. */
772	#define VERR_CFGM_INVALID_NODE_PATH (-2160)
773	/** A new node couldn't be inserted because one with the same name exists. */
774	#define VERR_CFGM_NODE_EXISTS (-2161)
775	/** A new leaf couldn't be inserted because one with the same name exists. */
776	#define VERR_CFGM_LEAF_EXISTS (-2162)
777	/** An unknown config value was encountered. */
778	#define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163)
779	/** An unknown config node (key) was encountered. */
780	#define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164)
781	/** @} */
782
783
784	/** @name Time Manager (TM) Status Codes
785	* @{
786	*/
787	/** The loaded timer state was incorrect. */
788	#define VERR_TM_LOAD_STATE (-2200)
789	/** The timer was not in the correct state for the request operation. */
790	#define VERR_TM_INVALID_STATE (-2201)
791	/** The timer was in a unknown state. Corruption or stupid coding error. */
792	#define VERR_TM_UNKNOWN_STATE (-2202)
793	/** The timer was stuck in an unstable state until we grew impatient and returned. */
794	#define VERR_TM_UNSTABLE_STATE (-2203)
795	/** @} */
796
797
798	/** @name Recompiled Execution Manager (REM) Status Codes
799	* @{
800	*/
801	/** Fatal error in virtual hardware. */
802	#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
803	/** Fatal error in the recompiler cpu. */
804	#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
805	/** Recompiler execution was interrupted by forced action. */
806	#define VINF_REM_INTERRUPED_FF 2302
807	/** Too many similar traps. This is a very useful debug only
808	* check (we don't do double/triple faults in REM). */
809	#define VERR_REM_TOO_MANY_TRAPS (-2304)
810	/** The REM is out of breakpoint slots. */
811	#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
812	/** The REM could not find any breakpoint on the specified address. */
813	#define VERR_REM_BP_NOT_FOUND (-2306)
814	/** @} */
815
816
817	/** @name Trap Manager / Monitor (TRPM) Status Codes
818	* @{
819	*/
820	/** No active trap. Cannot query or reset a non-existing trap. */
821	#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
822	/** Active trap. Cannot assert a new trap when when one is already active. */
823	#define VERR_TRPM_ACTIVE_TRAP (-2401)
824	/** Reason for leaving GC: Guest tried to write to our IDT - fatal.
825	* The VM will be terminated assuming the worst, i.e. that the
826	* guest has read the idtr register. */
827	#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
828	/** Reason for leaving GC: Fatal trap in hypervisor. */
829	#define VERR_TRPM_DONT_PANIC (-2403)
830	/** Reason for leaving GC: Double Fault. */
831	#define VERR_TRPM_PANIC (-2404)
832	/** The exception was dispatched for raw-mode execution. */
833	#define VINF_TRPM_XCPT_DISPATCHED 2405
834	/** @} */
835
836
837	/** @name Selector Manager / Monitor (SELM) Status Code
838	* @{
839	*/
840	/** Reason for leaving GC: Guest tried to write to our GDT - fatal.
841	* The VM will be terminated assuming the worst, i.e. that the
842	* guest has read the gdtr register. */
843	#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
844	/** Reason for leaving GC: Guest tried to write to our LDT - fatal.
845	* The VM will be terminated assuming the worst, i.e. that the
846	* guest has read the ldtr register. */
847	#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
848	/** Reason for leaving GC: Guest tried to write to our TSS - fatal.
849	* The VM will be terminated assuming the worst, i.e. that the
850	* guest has read the ltr register. */
851	#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
852	/** Reason for leaving GC: Sync the GDT table to solve a conflict. */
853	#define VINF_SELM_SYNC_GDT 2503
854	/** No valid TSS present. */
855	#define VERR_SELM_NO_TSS (-2504)
856	/** @} */
857
858
859	/** @name I/O Manager / Monitor (IOM) Status Code
860	* @{
861	*/
862	/** The specified I/O port range was invalid.
863	* It was either empty or it was out of bounds. */
864	#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
865	/** The specified GC I/O port range didn't have a corresponding HC range.
866	* IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */
867	#define VERR_IOM_NO_HC_IOPORT_RANGE (-2601)
868	/** The specified I/O port range intruded on an existing range. There is
869	* a I/O port conflict between two device, or a device tried to register
870	* the same range twice. */
871	#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
872	/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
873	#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
874	/** The specified I/O port range was owned by some other device(s). Both registration
875	* and deregistration, but in the first case only GC ranges. */
876	#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
877
878	/** The specified MMIO range was invalid.
879	* It was either empty or it was out of bounds. */
880	#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
881	/** The specified GC MMIO range didn't have a corresponding HC range.
882	* IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */
883	#define VERR_IOM_NO_HC_MMIO_RANGE (-2606)
884	/** The specified MMIO range was owned by some other device(s). Both registration
885	* and deregistration, but in the first case only GC ranges. */
886	#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
887	/** The specified MMIO range intruded on an existing range. There is
888	* a MMIO conflict between two device, or a device tried to register
889	* the same range twice. */
890	#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
891	/** The MMIO range specified for removal was not found. */
892	#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
893	/** The MMIO range specified for removal was invalid. The range didn't match
894	* quite match a set of existing ranges. It's not possible to remove parts of
895	* a MMIO range, only one or more full ranges. */
896	#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
897	/** An invalid I/O port size was specified for a read or write operation. */
898	#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
899	/** The MMIO handler was called for a bogus address! Internal error! */
900	#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
901	/** The MMIO handler experienced a problem with the disassembler. */
902	#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
903	/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
904	#define VERR_IOM_IOPORT_UNUSED (-2614)
905	/** Unused MMIO register read, fill with 00. */
906	#define VINF_IOM_MMIO_UNUSED_00 2615
907	/** Unused MMIO register read, fill with FF. */
908	#define VINF_IOM_MMIO_UNUSED_FF 2616
909
910	/** Reason for leaving GC: I/O port read. */
911	#define VINF_IOM_HC_IOPORT_READ 2620
912	/** Reason for leaving GC: I/O port write. */
913	#define VINF_IOM_HC_IOPORT_WRITE 2621
914	/** Reason for leaving GC: MMIO write. */
915	#define VINF_IOM_HC_MMIO_READ 2623
916	/** Reason for leaving GC: MMIO read. */
917	#define VINF_IOM_HC_MMIO_WRITE 2624
918	/** Reason for leaving GC: MMIO read/write. */
919	#define VINF_IOM_HC_MMIO_READ_WRITE 2625
920	/** @} */
921
922
923	/** @name Virtual Machine Monitor (VMM) Status Codes
924	* @{
925	*/
926	/** Reason for leaving RZ: Calling host function. */
927	#define VINF_VMM_CALL_HOST 2700
928	/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
929	#define VERR_VMM_RING0_ASSERTION (-2701)
930	/** The hyper CR3 differs between PGM and CPUM. */
931	#define VERR_VMM_HYPER_CR3_MISMATCH (-2702)
932	/** Reason for leaving RZ: Illegal call to ring-3. */
933	#define VERR_VMM_RING3_CALL_DISABLED (-2703)
934	/** @} */
935
936
937	/** @name Pluggable Device and Driver Manager (PDM) Status Codes
938	* @{
939	*/
940	/** An invalid LUN specification was given. */
941	#define VERR_PDM_NO_SUCH_LUN (-2800)
942	/** A device encountered an unknown configuration value.
943	* This means that the device is potentially misconfigured and the device
944	* construction or unit attachment failed because of this. */
945	#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
946	/** The above driver doesn't export a interface required by a driver being
947	* attached to it. Typical misconfiguration problem. */
948	#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
949	/** The below driver doesn't export a interface required by the drive
950	* having attached it. Typical misconfiguration problem. */
951	#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
952	/** A device didn't find a required interface with an attached driver.
953	* Typical misconfiguration problem. */
954	#define VERR_PDM_MISSING_INTERFACE (-2804)
955	/** A driver encountered an unknown configuration value.
956	* This means that the driver is potentially misconfigured and the driver
957	* construction failed because of this. */
958	#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
959	/** The PCI bus assigned to a device didn't have room for it.
960	* Either too many devices are configured on the same PCI bus, or there are
961	* some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
962	#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
963	/** A queue is out of free items, the queueing operation failed. */
964	#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
965	/** Not possible to attach further drivers to the driver.
966	* A driver which doesn't support attachments (below of course) will
967	* return this status code if it found that further drivers were configured
968	* to be attached to it. */
969	#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
970	/** Not possible to attach drivers to the device.
971	* A device which doesn't support attachments (below of course) will
972	* return this status code if it found that drivers were configured
973	* to be attached to it. */
974	#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
975	/** No attached driver.
976	* The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
977	* this error when no driver was configured to be attached. */
978	#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
979	/** The media geometry hasn't been set yet, so it cannot be obtained.
980	* The caller should then calculate the geometry from the media size. */
981	#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
982	/** The media translation hasn't been set yet, so it cannot be obtained.
983	* The caller should then guess the translation. */
984	#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
985	/** The media is not mounted, operation requires a mounted media. */
986	#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
987	/** Mount failed because a media was already mounted. Unmount the media
988	* and retry the mount. */
989	#define VERR_PDM_MEDIA_MOUNTED (-2814)
990	/** The media is locked and cannot be unmounted. */
991	#define VERR_PDM_MEDIA_LOCKED (-2815)
992	/** No 'Type' attribute in the DrvBlock configuration.
993	* Misconfiguration. */
994	#define VERR_PDM_BLOCK_NO_TYPE (-2816)
995	/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
996	* Misconfiguration. */
997	#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
998	/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
999	* Misconfiguration. */
1000	#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
1001	/** The block driver type wasn't supported.
1002	* Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
1003	#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
1004	/** A attach or prepare mount call failed because the driver already
1005	* had a driver attached. */
1006	#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
1007	/** An attempt on deattaching a driver without anyone actually being attached, or
1008	* performing any other operation on an attached driver. */
1009	#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
1010	/** The attached driver configuration is missing the 'Driver' attribute. */
1011	#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
1012	/** The configured driver wasn't found.
1013	* Either the necessary driver modules wasn't loaded, the name was
1014	* misspelled, or it was a misconfiguration. */
1015	#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
1016	/** The Ring-3 module was already loaded. */
1017	#define VINF_PDM_ALREADY_LOADED (2824)
1018	/** The name of the module clashed with an existing module. */
1019	#define VERR_PDM_MODULE_NAME_CLASH (-2825)
1020	/** Couldn't find any export for registration of drivers/devices. */
1021	#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
1022	/** A module name is too long. */
1023	#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
1024	/** Driver name clash. Another driver with the same name as the
1025	* one begin registred exists. */
1026	#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
1027	/** The version of the driver registration structure is unknown
1028	* to this VBox version. Either mixing incompatible versions or
1029	* the structure isn't correctly initialized. */
1030	#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
1031	/** Invalid entry in the driver registration structure. */
1032	#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
1033	/** Invalid host bit mask. */
1034	#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
1035	/** Not possible to detach a driver because the above driver/device
1036	* doesn't support it. The above entity doesn't implement the pfnDetach call. */
1037	#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
1038	/** No PCI Bus is available to register the device with. This is usually a
1039	* misconfiguration or in rare cases a buggy pci device. */
1040	#define VERR_PDM_NO_PCI_BUS (-2833)
1041	/** The device is not a registered PCI device and thus cannot
1042	* perform any PCI operations. The device forgot to register it self. */
1043	#define VERR_PDM_NOT_PCI_DEVICE (-2834)
1044
1045	/** The version of the device registration structure is unknown
1046	* to this VBox version. Either mixing incompatible versions or
1047	* the structure isn't correctly initialized. */
1048	#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
1049	/** Invalid entry in the device registration structure. */
1050	#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
1051	/** Invalid host bit mask. */
1052	#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
1053	/** The guest bit mask didn't match the guest being loaded. */
1054	#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
1055	/** Device name clash. Another device with the same name as the
1056	* one begin registred exists. */
1057	#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
1058	/** The device wasn't found. There was no registered device
1059	* by that name. */
1060	#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
1061	/** The device instance was not found. */
1062	#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
1063	/** The device instance have no base interface. */
1064	#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
1065	/** The device instance have no such logical unit. */
1066	#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
1067	/** The driver instance could not be found. */
1068	#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
1069	/** Logical Unit was not found. */
1070	#define VERR_PDM_LUN_NOT_FOUND (-2845)
1071	/** The Logical Unit was found, but it had no driver attached to it. */
1072	#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
1073	/** The Logical Unit was found, but it had no driver attached to it. */
1074	#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
1075	/** No PIC device instance is registered with the current VM and thus
1076	* the PIC operation cannot be performed. */
1077	#define VERR_PDM_NO_PIC_INSTANCE (-2847)
1078	/** No APIC device instance is registered with the current VM and thus
1079	* the APIC operation cannot be performed. */
1080	#define VERR_PDM_NO_APIC_INSTANCE (-2848)
1081	/** No DMAC device instance is registered with the current VM and thus
1082	* the DMA operation cannot be performed. */
1083	#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
1084	/** No RTC device instance is registered with the current VM and thus
1085	* the RTC or CMOS operation cannot be performed. */
1086	#define VERR_PDM_NO_RTC_INSTANCE (-2850)
1087	/** Unable to open the host interface due to a sharing violation . */
1088	#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
1089	/** Unable to open the host interface. */
1090	#define VERR_PDM_HIF_OPEN_FAILED (-2852)
1091	/** The device doesn't support runtime driver attaching.
1092	* The PDMDEVREG::pfnAttach callback function is NULL. */
1093	#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
1094	/** The driver doesn't support runtime driver attaching.
1095	* The PDMDRVREG::pfnAttach callback function is NULL. */
1096	#define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854)
1097	/** Invalid host interface version. */
1098	#define VERR_PDM_HIF_INVALID_VERSION (-2855)
1099
1100	/** The version of the USB device registration structure is unknown
1101	* to this VBox version. Either mixing incompatible versions or
1102	* the structure isn't correctly initialized. */
1103	#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
1104	/** Invalid entry in the device registration structure. */
1105	#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
1106	/** Driver name clash. Another driver with the same name as the
1107	* one begin registred exists. */
1108	#define VERR_PDM_USB_NAME_CLASH (-2858)
1109	/** The USB hub is already registered. */
1110	#define VERR_PDM_USB_HUB_EXISTS (-2859)
1111	/** Couldn't find any USB hubs to attach the device to. */
1112	#define VERR_PDM_NO_USB_HUBS (-2860)
1113	/** Couldn't find any free USB ports to attach the device to. */
1114	#define VERR_PDM_NO_USB_PORTS (-2861)
1115	/** Couldn't find the USB Proxy device. Using OSE? */
1116	#define VERR_PDM_NO_USBPROXY (-2862)
1117	/** The async completion template is still used. */
1118	#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
1119	/** The async completion task is already suspended. */
1120	#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
1121	/** The async completion task is not suspended. */
1122	#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
1123	/** The driver properties were invalid, and as a consequence construction
1124	* failed. Caused my unusable media or similar problems. */
1125	#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
1126	/** Too many instances of a device. */
1127	#define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867)
1128	/** Too many instances of a driver. */
1129	#define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868)
1130	/** Too many instances of a usb device. */
1131	#define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869)
1132	/** @} */
1133
1134
1135	/** @name Host-Guest Communication Manager (HGCM) Status Codes
1136	* @{
1137	*/
1138	/** Requested service does not exist. */
1139	#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
1140	/** Service rejected client connection */
1141	#define VINF_HGCM_CLIENT_REJECTED 2901
1142	/** Command address is invalid. */
1143	#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
1144	/** Service will execute the command in background. */
1145	#define VINF_HGCM_ASYNC_EXECUTE 2903
1146	/** HGCM could not perform requested operation because of an internal error. */
1147	#define VERR_HGCM_INTERNAL (-2904)
1148	/** Invalid HGCM client id. */
1149	#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
1150	/** The HGCM is saving state. */
1151	#define VINF_HGCM_SAVE_STATE (2906)
1152	/** Requested service already exists. */
1153	#define VERR_HGCM_SERVICE_EXISTS (-2907)
1154
1155	/** @} */
1156
1157
1158	/** @name Network Address Translation Driver (DrvNAT) Status Codes
1159	* @{
1160	*/
1161	/** Failed to find the DNS configured for this machine. */
1162	#define VINF_NAT_DNS 3000
1163	/** Failed to convert the specified Guest IP to a binary IP address.
1164	* Malformed input. */
1165	#define VERR_NAT_REDIR_GUEST_IP (-3001)
1166	/** Failed while setting up a redirector rule.
1167	* There probably is a conflict between the rule and some existing
1168	* service on the computer. */
1169	#define VERR_NAT_REDIR_SETUP (-3002)
1170	/** @} */
1171
1172
1173	/** @name HostIF Driver (DrvTUN) Status Codes
1174	* @{
1175	*/
1176	/** The Host Interface Networking init program failed. */
1177	#define VERR_HOSTIF_INIT_FAILED (-3100)
1178	/** The Host Interface Networking device name is too long. */
1179	#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
1180	/** The Host Interface Networking name config IOCTL call failed. */
1181	#define VERR_HOSTIF_IOCTL (-3102)
1182	/** Failed to make the Host Interface Networking handle non-blocking. */
1183	#define VERR_HOSTIF_BLOCKING (-3103)
1184	/** If a Host Interface Networking filehandle was specified it's not allowed to
1185	* have any init or term programs. */
1186	#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
1187	/** The Host Interface Networking terminate program failed. */
1188	#define VERR_HOSTIF_TERM_FAILED (-3105)
1189	/** @} */
1190
1191
1192	/** @name VBox HDD Container (VD) Status Codes
1193	* @{
1194	*/
1195	/** Invalid image type. */
1196	#define VERR_VD_INVALID_TYPE (-3200)
1197	/** Operation can't be done in current HDD container state. */
1198	#define VERR_VD_INVALID_STATE (-3201)
1199	/** Configuration value not found. */
1200	#define VERR_VD_VALUE_NOT_FOUND (-3202)
1201	/** Virtual HDD is not opened. */
1202	#define VERR_VD_NOT_OPENED (-3203)
1203	/** Requested image is not opened. */
1204	#define VERR_VD_IMAGE_NOT_FOUND (-3204)
1205	/** Image is read-only. */
1206	#define VERR_VD_IMAGE_READ_ONLY (-3205)
1207	/** Geometry hasn't been set. */
1208	#define VERR_VD_GEOMETRY_NOT_SET (-3206)
1209	/** No data for this block in image. */
1210	#define VERR_VD_BLOCK_FREE (-3207)
1211	/** Differencing and parent images can't be used together due to UUID. */
1212	#define VERR_VD_UUID_MISMATCH (-3208)
1213	/** Asynchronous I/O request finished. */
1214	#define VINF_VD_ASYNC_IO_FINISHED 3209
1215	/** Asynchronous I/O is not finished yet. */
1216	#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
1217	/** The image is too small or too large for this format. */
1218	#define VERR_VD_INVALID_SIZE (-3211)
1219	/** Generic: Invalid image file header. Use this for plugins. */
1220	#define VERR_VD_GEN_INVALID_HEADER (-3220)
1221	/** VDI: Invalid image file header. */
1222	#define VERR_VD_VDI_INVALID_HEADER (-3230)
1223	/** VDI: Invalid image file header: invalid signature. */
1224	#define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
1225	/** VDI: Invalid image file header: invalid version. */
1226	#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
1227	/** Comment string is too long. */
1228	#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
1229	/** VMDK: Invalid image file header. */
1230	#define VERR_VD_VMDK_INVALID_HEADER (-3240)
1231	/** VMDK: Invalid image file header: invalid version. */
1232	#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
1233	/** VMDK: Image property not found. */
1234	#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
1235	/** VMDK: Operation can't be done in current image state. */
1236	#define VERR_VD_VMDK_INVALID_STATE (-3243)
1237	/** VMDK: Format is invalid/inconsistent. */
1238	#define VERR_VD_VMDK_INVALID_FORMAT (-3244)
1239	/** VMDK: Invalid write position. */
1240	#define VERR_VD_VMDK_INVALID_WRITE (-3245)
1241	/** iSCSI: Invalid header, i.e. dummy for validity check. */
1242	#define VERR_VD_ISCSI_INVALID_HEADER (-3250)
1243	/** iSCSI: Configuration value is unknown. This indicates misconfiguration. */
1244	#define VERR_VD_ISCSI_UNKNOWN_CFG_VALUES (-3251)
1245	/** iSCSI: Interface is unknown. This indicates misconfiguration. */
1246	#define VERR_VD_ISCSI_UNKNOWN_INTERFACE (-3252)
1247	/** iSCSI: Operation can't be done in current image state. */
1248	#define VERR_VD_ISCSI_INVALID_STATE (-3253)
1249	/** iSCSI: Invalid device type (not a disk). */
1250	#define VERR_VD_ISCSI_INVALID_TYPE (-3254)
1251	/** VHD: Invalid image file header. */
1252	#define VERR_VD_VHD_INVALID_HEADER (-3260)
1253	/** Parallels HDD: Invalid image file header. */
1254	#define VERR_VD_PARALLELS_INVALID_HEADER (-3265)
1255	/** DMG: Invalid image file header. */
1256	#define VERR_VD_DMG_INVALID_HEADER (-3267)
1257	/** Raw: Invalid image file header. */
1258	#define VERR_VD_RAW_INVALID_HEADER (-3270)
1259	/** Raw: Invalid image file type. */
1260	#define VERR_VD_RAW_INVALID_TYPE (-3271)
1261	/** The backend needs more metadata before it can continue. */
1262	#define VERR_VD_NOT_ENOUGH_METADATA (-3272)
1263	/** Halt the current I/O context until further notification from the backend. */
1264	#define VERR_VD_IOCTX_HALT (-3273)
1265	/** The disk has a cache attached already. */
1266	#define VERR_VD_CACHE_ALREADY_EXISTS (-3274)
1267	/** There is no cache attached to the disk. */
1268	#define VERR_VD_CACHE_NOT_FOUND (-3275)
1269	/** The cache is not up to date with the image. */
1270	#define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276)
1271	/** @} */
1272
1273
1274	/** @name VBox Guest Library (VBGL) Status Codes
1275	* @{
1276	*/
1277	/** Library was not initialized. */
1278	#define VERR_VBGL_NOT_INITIALIZED (-3300)
1279	/** Virtual address was not allocated by the library. */
1280	#define VERR_VBGL_INVALID_ADDR (-3301)
1281	/** IOCtl to VBoxGuest driver failed. */
1282	#define VERR_VBGL_IOCTL_FAILED (-3302)
1283	/** @} */
1284
1285
1286	/** @name VBox USB (VUSB) Status Codes
1287	* @{
1288	*/
1289	/** No available ports on the hub.
1290	* This error is returned when a device is attempted created and/or attached
1291	* to a hub which is out of ports. */
1292	#define VERR_VUSB_NO_PORTS (-3400)
1293	/** The requested operation cannot be performed on a detached USB device. */
1294	#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1295	/** Failed to allocate memory for a URB. */
1296	#define VERR_VUSB_NO_URB_MEMORY (-3402)
1297	/** General failure during URB queuing.
1298	* This will go away when the queueing gets proper status code handling. */
1299	#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1300	/** Device creation failed because the USB device name was not found. */
1301	#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1302	/** Not permitted to open the USB device.
1303	* The user doesn't have access to the device in the usbfs, check the mount options. */
1304	#define VERR_VUSB_USBFS_PERMISSION (-3405)
1305	/** The requested operation cannot be performed because the device
1306	* is currently being reset. */
1307	#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1308	/** The requested operation cannot be performed because the device
1309	* is currently suspended. */
1310	#define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407)
1311	/** @} */
1312
1313
1314	/** @name VBox VGA Status Codes
1315	* @{
1316	*/
1317	/** One of the custom modes was incorrect.
1318	* The format or bit count of the custom mode value is invalid. */
1319	#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1320	/** The display connector is resizing. */
1321	#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1322	/** @} */
1323
1324
1325	/** @name Internal Networking Status Codes
1326	* @{
1327	*/
1328	/** The networking interface to filter was not found. */
1329	#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
1330	/** The networking interface to filter was busy (used by someone). */
1331	#define VERR_INTNET_FLT_IF_BUSY (-3601)
1332	/** Failed to create or connect to a networking interface filter. */
1333	#define VERR_INTNET_FLT_IF_FAILED (-3602)
1334	/** The network already exists with a different trunk configuration. */
1335	#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
1336	/** The network already exists with a different security profile (restricted / public). */
1337	#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
1338	/** Failed to create a virtual network interface instance. */
1339	#define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605)
1340	/** @} */
1341
1342
1343	/** @name Support Driver Status Codes
1344	* @{
1345	*/
1346	/** The component factory was not found. */
1347	#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
1348	/** The component factories do not support the requested interface. */
1349	#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
1350	/** The service module was not found. */
1351	#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
1352	/** The host kernel is too old. */
1353	#define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703)
1354	/** @} */
1355
1356
1357	/** @name Support Library Status Codes
1358	* @{
1359	*/
1360	/** The specified path was not absolute (hardening). */
1361	#define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750)
1362	/** The specified path was not clean (hardening). */
1363	#define VERR_SUPLIB_PATH_NOT_CLEAN (-3751)
1364	/** The specified path is too long (hardening). */
1365	#define VERR_SUPLIB_PATH_TOO_LONG (-3752)
1366	/** The specified path is too short (hardening). */
1367	#define VERR_SUPLIB_PATH_TOO_SHORT (-3753)
1368	/** The specified path has too many components (hardening). */
1369	#define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754)
1370	/** The specified path is a root path (hardening). */
1371	#define VERR_SUPLIB_PATH_IS_ROOT (-3755)
1372	/** Failed to enumerate directory (hardening). */
1373	#define VERR_SUPLIB_DIR_ENUM_FAILED (-3756)
1374	/** Failed to stat a file/dir during enumeration (hardening). */
1375	#define VERR_SUPLIB_STAT_ENUM_FAILED (-3757)
1376	/** Failed to stat a file/dir (hardening). */
1377	#define VERR_SUPLIB_STAT_FAILED (-3758)
1378	/** Failed to fstat a native handle (hardening). */
1379	#define VERR_SUPLIB_FSTAT_FAILED (-3759)
1380	/** Found an illegal symbolic link (hardening). */
1381	#define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760)
1382	/** Found something which isn't a file nor a directory (hardening). */
1383	#define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761)
1384	/** The specified path is a directory and not a file (hardening). */
1385	#define VERR_SUPLIB_IS_DIRECTORY (-3762)
1386	/** The specified path is a file and not a directory (hardening). */
1387	#define VERR_SUPLIB_IS_FILE (-3763)
1388	/** The path is not the same object as the native handle (hardening). */
1389	#define VERR_SUPLIB_NOT_SAME_OBJECT (-3764)
1390	/** The owner is not root (hardening). */
1391	#define VERR_SUPLIB_OWNER_NOT_ROOT (-3765)
1392	/** The group is a non-system group and it has write access (hardening). */
1393	#define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766)
1394	/** The file or directory is world writable (hardening). */
1395	#define VERR_SUPLIB_WORLD_WRITABLE (-3767)
1396	/** The argv[0] of an internal application does not match the executable image
1397	* path (hardening). */
1398	#define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768)
1399	/** The internal application does not reside in the correct place (hardening). */
1400	#define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769)
1401	/** @} */
1402
1403
1404	/** @name VBox GMM Status Codes
1405	* @{
1406	*/
1407	/** The GMM is out of pages and needs to be give another chunk of user memory that
1408	* it can lock down and borrow pages from. */
1409	#define VERR_GMM_SEED_ME (-3800)
1410	/** Unable to allocate more pages from the host system. */
1411	#define VERR_GMM_OUT_OF_MEMORY (-3801)
1412	/** Hit the global allocation limit.
1413	* If you know there is still sufficient memory available, try raise the limit. */
1414	#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
1415	/** Hit the a VM account limit. */
1416	#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
1417	/** Attempt to free more memory than what was previously allocated. */
1418	#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
1419	/** Attempted to report too many pages as deflated. */
1420	#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
1421	/** The page to be freed or updated was not found. */
1422	#define VERR_GMM_PAGE_NOT_FOUND (-3806)
1423	/** The specified shared page was not actually private. */
1424	#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
1425	/** The specified shared page was not actually shared. */
1426	#define VERR_GMM_PAGE_NOT_SHARED (-3808)
1427	/** The page to be freed was already freed. */
1428	#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
1429	/** The page to be updated or freed was noted owned by the caller. */
1430	#define VERR_GMM_NOT_PAGE_OWNER (-3810)
1431	/** The specified chunk was not found. */
1432	#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
1433	/** The chunk has already been mapped into the process. */
1434	#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
1435	/** The chunk to be unmapped isn't actually mapped into the process. */
1436	#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
1437	/** The reservation or reservation update was declined - too many VMs, too
1438	* little memory, and/or too low GMM configuration. */
1439	#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3814)
1440	/** @} */
1441
1442
1443	/** @name VBox GVM Status Codes
1444	* @{
1445	*/
1446	/** The GVM is out of VM handle space. */
1447	#define VERR_GVM_TOO_MANY_VMS (-3900)
1448	/** The EMT was not blocked at the time of the call. */
1449	#define VINF_GVM_NOT_BLOCKED 3901
1450	/** The EMT was not busy running guest code at the time of the call. */
1451	#define VINF_GVM_NOT_BUSY_IN_GC 3902
1452	/** RTThreadYield was called during a GVMMR0SchedPoll call. */
1453	#define VINF_GVM_YIELDED 3903
1454	/** @} */
1455
1456
1457	/** @name VBox VMX Status Codes
1458	* @{
1459	*/
1460	/** Invalid VMCS index or write to read-only element. */
1461	#define VERR_VMX_INVALID_VMCS_FIELD (-4000)
1462	/** Invalid VMCS pointer. */
1463	#define VERR_VMX_INVALID_VMCS_PTR (-4001)
1464	/** Invalid VMXON pointer. */
1465	#define VERR_VMX_INVALID_VMXON_PTR (-4002)
1466	/** Generic VMX failure. */
1467	#define VERR_VMX_GENERIC (-4003)
1468	/** Invalid CPU mode for VMX execution. */
1469	#define VERR_VMX_UNSUPPORTED_MODE (-4004)
1470	/** Unable to start VM execution. */
1471	#define VERR_VMX_UNABLE_TO_START_VM (-4005)
1472	/** Unable to resume VM execution. */
1473	#define VERR_VMX_UNABLE_TO_RESUME_VM (-4006)
1474	/** Unable to switch due to invalid host state. */
1475	#define VERR_VMX_INVALID_HOST_STATE (-4007)
1476	/** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */
1477	#define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4008)
1478	/** VMX CPU extension not available */
1479	#define VERR_VMX_NO_VMX (-4009)
1480	/** VMXON failed; possibly because it was already run before */
1481	#define VERR_VMX_VMXON_FAILED (-4010)
1482	/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
1483	#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
1484	/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
1485	#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
1486	/** VT-x features locked or unavailable in MSR. */
1487	#define VERR_VMX_MSR_LOCKED_OR_DISABLED (-4013)
1488	/** Unable to switch due to invalid guest state. */
1489	#define VERR_VMX_INVALID_GUEST_STATE (-4014)
1490	/** Unexpected VM exit code. */
1491	#define VERR_VMX_UNEXPECTED_EXIT_CODE (-4015)
1492	/** Unexpected VM exception code. */
1493	#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
1494	/** Unexpected interruption exit code. */
1495	#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_CODE (-4017)
1496	/** CPU is not in VMX root mode; unexpected when leaving VMX root mode */
1497	#define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018)
1498	/** @} */
1499
1500
1501	/** @name VBox SVM Status Codes
1502	* @{
1503	*/
1504	/** Unable to start VM execution. */
1505	#define VERR_SVM_UNABLE_TO_START_VM (-4050)
1506	/** AMD-V bit not set in K6_EFER MSR */
1507	#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
1508	/** AMD-V CPU extension not available. */
1509	#define VERR_SVM_NO_SVM (-4052)
1510	/** AMD-V CPU extension disabled (by BIOS). */
1511	#define VERR_SVM_DISABLED (-4053)
1512	/** AMD-V CPU extension in-use. */
1513	#define VERR_SVM_IN_USE (-4054)
1514	/** @} */
1515
1516
1517	/** @name VBox HWACCM Status Codes
1518	* @{
1519	*/
1520	/** Unable to start VM execution. */
1521	#define VERR_HWACCM_UNKNOWN_CPU (-4100)
1522	/** No CPUID support. */
1523	#define VERR_HWACCM_NO_CPUID (-4101)
1524	/** Host is about to go into suspend mode. */
1525	#define VERR_HWACCM_SUSPEND_PENDING (-4102)
1526	/** Conflicting CFGM values. */
1527	#define VERR_HWACCM_CONFIG_MISMATCH (-4103)
1528	/** @} */
1529
1530
1531	/** @name VBox Disassembler Status Codes
1532	* @{
1533	*/
1534	/** Invalid opcode byte(s) */
1535	#define VERR_DIS_INVALID_OPCODE (-4200)
1536	/** Generic failure during disassembly. */
1537	#define VERR_DIS_GEN_FAILURE (-4201)
1538	/** @} */
1539
1540
1541	/** @name VBox Webservice Status Codes
1542	* @{
1543	*/
1544	/** Authentication failed (ISessionManager::logon()) */
1545	#define VERR_WEB_NOT_AUTHENTICATED (-4300)
1546	/** Invalid format of managed object reference */
1547	#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
1548	/** Invalid session ID in managed object reference */
1549	#define VERR_WEB_INVALID_SESSION_ID (-4302)
1550	/** Invalid object ID in managed object reference */
1551	#define VERR_WEB_INVALID_OBJECT_ID (-4303)
1552	/** Unsupported interface for managed object reference */
1553	#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
1554	/** @} */
1555
1556
1557	/** @name VBox PARAV Status Codes
1558	* @{
1559	*/
1560	/** Switch back to host */
1561	#define VINF_PARAV_SWITCH_TO_HOST 4400
1562
1563	/** @} */
1564
1565	/** @name VBox Video HW Acceleration command status
1566	* @{
1567	*/
1568	/** command processing is pending, a completion handler will be called */
1569	#define VINF_VHWA_CMD_PENDING 4500
1570
1571	/** @} */
1572
1573
1574	/** @name VBox COM error codes
1575	*
1576	* @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses
1577	* these for conversion that is lossless with respect to important COM
1578	* status codes. These methods should be moved to the glue library.
1579	* @{ */
1580	/** Unexpected turn of events. */
1581	#define VERR_COM_UNEXPECTED (-4600)
1582	/** The base of the VirtualBox COM status codes (the lower value)
1583	* corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */
1584	#define VERR_COM_VBOX_LOWEST (-4699)
1585	/** Object corresponding to the supplied arguments does not exist. */
1586	#define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1)
1587	/** Current virtual machine state prevents the operation. */
1588	#define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2)
1589	/** Virtual machine error occurred attempting the operation. */
1590	#define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3)
1591	/** File not accessible or erroneous file contents. */
1592	#define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4)
1593	/** IPRT error. */
1594	#define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5)
1595	/** Pluggable Device Manager error. */
1596	#define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6)
1597	/** Current object state prohibits operation. */
1598	#define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7)
1599	/** Host operating system related error. */
1600	#define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8)
1601	/** Requested operation is not supported. */
1602	#define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9)
1603	/** Invalid XML found. */
1604	#define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10)
1605	/** Current session state prohibits operation. */
1606	#define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11)
1607	/** Object being in use prohibits operation. */
1608	#define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12)
1609	/** Returned by callback methods which does not need to be called
1610	* again because the client does not actually make use of them. */
1611	#define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13)
1612	/** @} */
1613
1614	/** @name VBox CPU hotplug Status codes
1615	* @{
1616	*/
1617	/** CPU hotplug events from VMMDev are not monitored by the guest. */
1618	#define VERR_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700)
1619	/** @} */
1620
1621	/** @name VBox async I/O manager Status Codes
1622	* @{
1623	*/
1624	/** Async I/O task is pending, a completion handler will be called. */
1625	#define VINF_AIO_TASK_PENDING 4800
1626	/** @} */
1627
1628	/** @name VBox Virtual SCSI Status Codes
1629	* @{
1630	*/
1631	/** LUN type is not supported. */
1632	#define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900)
1633	/** LUN is already/still attached to a device. */
1634	#define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901)
1635	/** The specified LUN is invalid. */
1636	#define VERR_VSCSI_LUN_INVALID (-4902)
1637	/** The LUN is not attached to the device. */
1638	#define VERR_VSCSI_LUN_NOT_ATTACHED (-4903)
1639	/** The LUN is still busy. */
1640	#define VERR_VSCSI_LUN_BUSY (-4904)
1641	/** @} */
1642
1643	/** @name VBox FAM Status Codes
1644	* @{
1645	*/
1646	/** FAM failed to open a connection. */
1647	#define VERR_FAM_OPEN_FAILED (-5000)
1648	/** FAM failed to add a file to the list to be monitored. */
1649	#define VERR_FAM_MONITOR_FILE_FAILED (-5001)
1650	/** FAM failed to add a directory to the list to be monitored. */
1651	#define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002)
1652	/** The connection to the FAM daemon was lost. */
1653	#define VERR_FAM_CONNECTION_LOST (-5003)
1654	/** @} */
1655
1656	/** @name VBox Extension Pack Status Codes
1657	* @{
1658	*/
1659	/** The host is not supported. Uninstall the extension pack.
1660	* Returned by the VBOXEXTPACKREG::pfnInstalled. */
1661	#define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-5000)
1662	/** @} */
1663
1664	/* SED-END */
1665
1666	/** @} */
1667
1668
1669	#endif
1670

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/err.h@ 35519

Download in other formats: