err.h@ 3269

Last change on this file since 3269 was 3208, checked in by vboxsync, 17 years ago
No need for VINF_IOM_HC_IOPORT_READWRITE afterall
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 48.9 KB

Line
1	/** @file
2	* VirtualBox Status Codes.
3	*/
4
5	/*
6	* Copyright (C) 2006-2007 innotek GmbH
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License as published by the Free Software Foundation,
12	* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
13	* distribution. VirtualBox OSE is distributed in the hope that it will
14	* be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* If you received this file as part of a commercial VirtualBox
17	* distribution, then only the terms of your commercial VirtualBox
18	* license agreement apply instead of the previous paragraph.
19	*/
20
21	#ifndef __VBox_err_h__
22	#define __VBox_err_h__
23
24	#include <VBox/cdefs.h>
25	#include <iprt/err.h>
26
27
28	/** @defgroup grp_err Error Codes
29	* @{
30	*/
31
32	/* SED-START */
33
34	/** @name Misc. Status Codes
35	* @{
36	*/
37	/** Failed to allocate VM memory. */
38	#define VERR_NO_VM_MEMORY (-1000)
39	/** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */
40	#define VERR_DONT_PANIC (-1001)
41	/** Unsupported CPU. */
42	#define VERR_UNSUPPORTED_CPU (-1002)
43	/** Unsupported CPU mode. */
44	#define VERR_UNSUPPORTED_CPU_MODE (-1003)
45	/** Page not present. */
46	#define VERR_PAGE_NOT_PRESENT (-1004)
47	/** Invalid/Corrupted configuration file. */
48	#define VERR_CFG_INVALID_FORMAT (-1005)
49	/** No configuration value exists. */
50	#define VERR_CFG_NO_VALUE (-1006)
51	/** Not selector not present. */
52	#define VERR_SELECTOR_NOT_PRESENT (-1007)
53	/** Not code selector. */
54	#define VERR_NOT_CODE_SELECTOR (-1008)
55	/** Not data selector. */
56	#define VERR_NOT_DATA_SELECTOR (-1009)
57	/** Out of selector bounds. */
58	#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
59	/** Invalid selector. Usually beyond table limits. */
60	#define VERR_INVALID_SELECTOR (-1011)
61	/** Invalid requested privilegde level. */
62	#define VERR_INVALID_RPL (-1012)
63	/** @} */
64
65
66	/** @name Execution Monitor/Manager (EM) Status Codes
67	*
68	* The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
69	* are of vital importance. The lower the number the higher importance
70	* as a scheduling instruction.
71	* @{
72	*/
73	/** First scheduling related status code. */
74	#define VINF_EM_FIRST 1100
75	/** Indicating that the VM is being terminated and that the the execution
76	* shall stop. */
77	#define VINF_EM_TERMINATE 1100
78	/** Hypervisor code was stepped.
79	* EM will first send this to the debugger, and if the issue isn't
80	* resolved there it will enter guru meditation. */
81	#define VINF_EM_DBG_HYPER_STEPPED 1101
82	/** Hit a breakpoint in the hypervisor code,
83	* EM will first send this to the debugger, and if the issue isn't
84	* resolved there it will enter guru meditation. */
85	#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
86	/** Hit a possible assertion in the hypervisor code,
87	* EM will first send this to the debugger, and if the issue isn't
88	* resolved there it will enter guru meditation. */
89	#define VINF_EM_DBG_HYPER_ASSERTION 1103
90	/** Indicating that the VM should be suspended for debugging because
91	* the developer wants to inspect the VM state. */
92	#define VINF_EM_DBG_STOP 1104
93	/** Indicating success single stepping and that EM should report that
94	* event to the debugger. */
95	#define VINF_EM_DBG_STEPPED 1105
96	/** Indicating that a breakpoint was hit and that EM should notify the debugger
97	* and in the event there is no debugger fail fatally. */
98	#define VINF_EM_DBG_BREAKPOINT 1106
99	/** Indicating that EM should single step an instruction.
100	* The instruction is stepped in the current execution mode (RAW/REM). */
101	#define VINF_EM_DBG_STEP 1107
102	/** Indicating that the VM is being turned off and that the EM should
103	* exit to the VM awaiting the destruction request. */
104	#define VINF_EM_OFF 1108
105	/** Indicating that the VM has been reset and that scheduling goes
106	* back to startup defaults. */
107	#define VINF_EM_RESET 1109
108	/** Indicating that the VM has been suspended and that the the thread
109	* should wait for request telling it what to do next. */
110	#define VINF_EM_SUSPEND 1110
111	/** Indicating that the VM has executed a halt instruction and that
112	* the emulation thread should wait for an interrupt before resuming
113	* execution. */
114	#define VINF_EM_HALT 1111
115	/** Indicating that the VM has been resumed and that the thread should
116	* start executing. */
117	#define VINF_EM_RESUME 1112
118	/** Indicating that a rescheduling to recompiled execution.
119	* Typically caused by raw-mode executing code which is difficult/slow
120	* to virtualize rawly.
121	* @note important to have a higher priority (lower number) than VINF_EM_RESCHEDULE
122	* and VINF_EM_RESCHEDULE_RAW
123	*/
124	#define VINF_EM_RESCHEDULE_REM 1114
125	/** Indicating that a rescheduling to vmx-mode execution.
126	* Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible.
127	*/
128	#define VINF_EM_RESCHEDULE_HWACC 1115
129	/** Indicating that a rescheduling to raw-mode execution.
130	* Typically caused by REM detecting that raw-mode execution is possible.
131	* @note important to have a higher priority (lower number) than VINF_EM_RESCHEDULE
132	* and VINF_EM_RESCHEDULE_RAW
133	*/
134	#define VINF_EM_RESCHEDULE_RAW 1116
135	/** Indicating that a rescheduling now is required. Typically caused by
136	* interrupts having changed the EIP. */
137	#define VINF_EM_RESCHEDULE 1117
138	/** Last scheduling related status code. (inclusive) */
139	#define VINF_EM_LAST 1118
140
141	/** Reason for leaving GC: Guest trap which couldn't be handled in GC.
142	* The trap is generally forwared to the REM and executed there. */
143	#define VINF_EM_RAW_GUEST_TRAP 1120
144	/** Reason for leaving GC: Interrupted by external interrupt.
145	* The interrupt needed to be handled by the host OS. */
146	#define VINF_EM_RAW_INTERRUPT 1121
147	/** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code.
148	* The interrupt needed to be handled by the host OS and hypervisor execution must be
149	* resumed. VM state is not complete at this point. */
150	#define VINF_EM_RAW_INTERRUPT_HYPER 1122
151	/** Reason for leaving GC: A Ring switch was attempted.
152	* Normal cause of action is to execute this in REM. */
153	#define VINF_EM_RAW_RING_SWITCH 1123
154	/** Reason for leaving GC: A Ring switch was attempted using software interrupt.
155	* Normal cause of action is to execute this in REM. */
156	#define VINF_EM_RAW_RING_SWITCH_INT 1124
157	/** Reason for leaving GC: A privileged instruction was attempted executed.
158	* Normal cause of action is to execute this in REM. */
159	#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1125
160
161	/** Reason for leaving GC: Emulate instruction. */
162	#define VINF_EM_RAW_EMULATE_INSTR 1126
163	/** Reason for leaving GC: Unhandled TSS write.
164	* Recompiler gets control. */
165	#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1127
166	/** Reason for leaving GC: Unhandled LDT write.
167	* Recompiler gets control. */
168	#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1128
169	/** Reason for leaving GC: Unhandled IDT write.
170	* Recompiler gets control. */
171	#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1129
172	/** Reason for leaving GC: Unhandled GDT write.
173	* Recompiler gets control. */
174	#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1130
175	/** Reason for leaving GC: Unhandled Page Directory write.
176	* Recompiler gets control. */
177	#define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1131
178	/** Reason for leaving GC: jump inside generated patch jump.
179	* Fatal error. */
180	#define VERR_EM_RAW_PATCH_CONFLICT (-1132)
181	/** Reason for leaving GC: Hlt instruction.
182	* Recompiler gets control. */
183	#define VINF_EM_RAW_EMULATE_INSTR_HLT 1133
184	/** Reason for leaving GC: Ring-3 operation pending. */
185	#define VINF_EM_RAW_TO_R3 1134
186	/** Reason for leaving GC: Timer pending. */
187	#define VINF_EM_RAW_TIMER_PENDING 1135
188	/** Reason for leaving GC: Interrupt pending (guest). */
189	#define VINF_EM_RAW_INTERRUPT_PENDING 1136
190	/** Reason for leaving GC: Encountered a stale selector. */
191	#define VINF_EM_RAW_STALE_SELECTOR 1137
192	/** Reason for leaving GC: The IRET resuming guest code trapped. */
193	#define VINF_EM_RAW_IRET_TRAP 1138
194	/** The interpreter was unable to deal with the instruction at hand. */
195	#define VERR_EM_INTERPRETER (-1148)
196	/** Internal EM error caused by an unknown warning or informational status code. */
197	#define VERR_EM_INTERNAL_ERROR (-1149)
198	/** Pending VM request packet. */
199	#define VINF_EM_PENDING_REQUEST (-1150)
200	/** @} */
201
202
203	/** @name Debugging Facility (DBGF) DBGF Status Codes
204	* @{
205	*/
206	/** The function called requires the caller to be attached as a
207	* debugger to the VM. */
208	#define VERR_DBGF_NOT_ATTACHED (-1200)
209	/** Someone (including the caller) was already attached as
210	* debugger to the VM. */
211	#define VERR_DBGF_ALREADY_ATTACHED (-1201)
212	/** Tried to hald a debugger which was already halted.
213	* (This is a warning and not an error.) */
214	#define VWRN_DBGF_ALREADY_HALTED 1202
215	/** The DBGF has no more free breakpoint slots. */
216	#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
217	/** The DBGF couldn't find the specified breakpoint. */
218	#define VERR_DBGF_BP_NOT_FOUND (-1204)
219	/** Attempted to enabled a breakpoint which was already enabled. */
220	#define VINF_DBGF_BP_ALREADY_ENABLED 1205
221	/** Attempted to disabled a breakpoint which was already disabled. */
222	#define VINF_DBGF_BP_ALREADY_DISABLED 1206
223	/** The breakpoint already exists. */
224	#define VINF_DBGF_BP_ALREADY_EXIST 1207
225	/** @} */
226
227
228	/** @name Patch Manager (PATM) Status Codes
229	* @{
230	*/
231	/** Non fatal Patch Manager analysis phase warning */
232	#define VWRN_CONTINUE_ANALYSIS 1400
233	/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
234	#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
235	/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
236	#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
237	/** Patch installation refused (patch too complex or unsupported instructions ) */
238	#define VERR_PATCHING_REFUSED (-1401)
239	/** Unable to find patch */
240	#define VERR_PATCH_NOT_FOUND (-1402)
241	/** Patch disabled */
242	#define VERR_PATCH_DISABLED (-1403)
243	/** Patch enabled */
244	#define VWRN_PATCH_ENABLED 1404
245	/** Patch was already disabled */
246	#define VERR_PATCH_ALREADY_DISABLED (-1405)
247	/** Patch was already enabled */
248	#define VERR_PATCH_ALREADY_ENABLED (-1406)
249	/** Patch was removed. */
250	#define VWRN_PATCH_REMOVED 1408
251
252	/** Reason for leaving GC: \#GP with EIP pointing to patch code. */
253	#define VINF_PATM_PATCH_TRAP_GP 1408
254	/** First leave GC code. */
255	#define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP
256	/** Reason for leaving GC: \#PF with EIP pointing to patch code. */
257	#define VINF_PATM_PATCH_TRAP_PF 1409
258	/** Reason for leaving GC: int3 with EIP pointing to patch code. */
259	#define VINF_PATM_PATCH_INT3 1410
260	/** Reason for leaving GC: \#PF for monitored patch page. */
261	#define VINF_PATM_CHECK_PATCH_PAGE 1411
262	/** Reason for leaving GC: duplicate instruction called at current eip. */
263	#define VINF_PATM_DUPLICATE_FUNCTION 1412
264	/** Execute one instruction with the recompiler */
265	#define VINF_PATCH_EMULATE_INSTR 1413
266	/** Reason for leaving GC: attempt to patch MMIO write. */
267	#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
268	/** Reason for leaving GC: attempt to patch MMIO read. */
269	#define VINF_PATM_HC_MMIO_PATCH_READ 1415
270	/** Reason for leaving GC: pending irq after iret that sets IF. */
271	#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
272	/** Last leave GC code. */
273	#define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
274
275	/** No conflicts to resolve */
276	#define VERR_PATCH_NO_CONFLICT (-1425)
277	/** Detected unsafe code for patching */
278	#define VERR_PATM_UNSAFE_CODE (-1426)
279	/** Terminate search branch */
280	#define VWRN_PATCH_END_BRANCH 1427
281	/** Already patched */
282	#define VERR_PATM_ALREADY_PATCHED (-1428)
283	/** Spinlock detection failed. */
284	#define VINF_PATM_SPINLOCK_FAILED (1429)
285	/** Continue execution after patch trap. */
286	#define VINF_PATCH_CONTINUE (1430)
287
288	/** @} */
289
290
291	/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
292	* @{
293	*/
294	/** Trap not handled */
295	#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
296	/** Patch installed */
297	#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
298	/** Page record not found */
299	#define VWRN_CSAM_PAGE_NOT_FOUND 1502
300	/** Reason for leaving GC: CSAM wants perform a task in ring-3. */
301	#define VINF_CSAM_PENDING_ACTION 1503
302	/** @} */
303
304
305	/** @name Page Monitor/Manager (PGM) Status Codes
306	* @{
307	*/
308	/** Attempt to create a GC mapping which conflicts with an existing mapping. */
309	#define VERR_PGM_MAPPING_CONFLICT (-1600)
310	/** The physical handler range has no corresponding RAM range.
311	* If this is MMIO, see todo above the return. If not MMIO, then it's
312	* someone else's fault... */
313	#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
314	/** Attempt to register an access handler for a virtual range of which a part
315	* was already handled. */
316	#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
317	/** Attempt to register an access handler for a physical range of which a part
318	* was already handled. */
319	#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
320	/** Invalid page directory specified to PGM. */
321	#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
322	/** Invalid GC physical address. */
323	#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
324	/** Invalid GC physical range. Usually used when a specified range crosses
325	* a RAM region boundrary. */
326	#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
327	/** Specified access handler was not found. */
328	#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
329	/** Attempt to register a RAM range of which parts are already
330	* covered by existing RAM ranges. */
331	#define VERR_PGM_RAM_CONFLICT (-1608)
332	/** Failed to add new mappings because the current mappings are fixed
333	* in guest os memory. */
334	#define VERR_PGM_MAPPINGS_FIXED (-1609)
335	/** Failed to fix mappings because of a conflict with the intermediate code. */
336	#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
337	/** Failed to fix mappings because a mapping rejected the address. */
338	#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
339	/** Failed to fix mappings because the proposed memory area was to small. */
340	#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
341	/** Reason for leaving GC: The urge to syncing CR3. */
342	#define VINF_PGM_SYNC_CR3 1613
343	/** Page not marked for dirty bit tracking */
344	#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
345	/** Page fault caused by dirty bit tracking; corrected */
346	#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
347	/** Go ahead with the default Read/Write operation.
348	* This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read\|Write]
349	* routine do the reading/writing. */
350	#define VINF_PGM_HANDLER_DO_DEFAULT 1616
351	/** The paging mode of the host is not supported yet. */
352	#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
353	/** The physical guest page is a reserved/mmio page and does not have any HC address. */
354	#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
355	/** No page directory available for the hypervisor. */
356	#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
357	/** The shadow page pool was flushed.
358	* This means that a global CR3 sync was flagged. Anyone receiving this kind of status
359	* will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
360	#define VERR_PGM_POOL_FLUSHED (-1620)
361	/** The shadow page pool was cleared.
362	* This is a error code internal to the shadow page pool, it will be
363	* converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
364	#define VERR_PGM_POOL_CLEARED (-1621)
365	/** The returned shadow page is cached. */
366	#define VINF_PGM_CACHED_PAGE 1622
367	/** Returned by handler registration, modification and deregistration
368	* when the shadow PTs could be updated because the guest page
369	* aliased or/and mapped by multiple PTs. */
370	#define VINF_PGM_GCPHYS_ALIASED 1623
371	/** Reason for leaving GC: Paging mode changed.
372	* PGMChangeMode() uses this to force a switch to HC so it can safely
373	* deal with a mode switch.
374	*/
375	#define VINF_PGM_CHANGE_MODE 1624
376	/** SyncPage modified the PDE.
377	* This is an internal status code used to communicate back to the \#PF handler
378	* that the PDE was (probably) marked not-present and it should restart the instruction. */
379	#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
380	/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
381	#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
382	/** @} */
383
384
385	/** @name Memory Monitor (MM) Status Codes
386	* @{
387	*/
388	/** Attempt to register a RAM range of which parts are already
389	* covered by existing RAM ranges. */
390	#define VERR_MM_RAM_CONFLICT (-1700)
391	/** Hypervisor memory allocation failed. */
392	#define VERR_MM_HYPER_NO_MEMORY (-1701)
393
394	/** @} */
395
396
397	/** @name Save State Manager (SSM) Status Codes
398	* @{
399	*/
400	/** The specified data unit already exist. */
401	#define VERR_SSM_UNIT_EXISTS (-1800)
402	/** The specified data unit wasn't found. */
403	#define VERR_SSM_UNIT_NOT_FOUND (-1801)
404	/** The specified data unit wasn't owned by caller. */
405	#define VERR_SSM_UNIT_NOT_OWNER (-1802)
406	/** General saved state file integrity error. */
407	#define VERR_SSM_INTEGRITY (-1810)
408	/** The saved state file magic was not recognized. */
409	#define VERR_SSM_INTEGRITY_MAGIC (-1811)
410	/** The saved state file magic was not recognized. */
411	#define VERR_SSM_INTEGRITY_VERSION (-1812)
412	/** The saved state file magic was not recognized. */
413	#define VERR_SSM_INTEGRITY_SIZE (-1813)
414	/** The CRC of the saved state file did match. */
415	#define VERR_SSM_INTEGRITY_CRC (-1814)
416	/** The current virtual machine id didn't match the virtual machine id. */
417	#define VERR_SMM_INTEGRITY_MACHINE (-1815)
418	/** Invalid unit magic (internal data tag). */
419	#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1816)
420	/** The file contained a data unit which no-one wants. */
421	#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1817)
422	/** A data unit in the saved state file was defined but didn't any
423	* routine for processing it. */
424	#define VERR_SSM_NO_LOAD_EXEC (-1818)
425	/** A restore routine attempted to load more data then the unit contained. */
426	#define VERR_SSM_LOADED_TOO_MUCH (-1819)
427	/** Not in the correct state for the attempted operation. */
428	#define VERR_SSM_INVALID_STATE (-1820)
429
430	/** Unsupported data unit version.
431	* A SSM user returns this if it doesn't know the u32Version. */
432	#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1821)
433	/** The format of a data unit has changed.
434	* A SSM user returns this if it's not able to read the format for
435	* other reasons than u32Version. */
436	#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1822)
437	/** The CPUID instruction returns different information when loading than when saved.
438	* Normally caused by hardware changes on the host, but could also be caused by
439	* changes in the BIOS setup. */
440	#define VERR_SSM_LOAD_CPUID_MISMATCH (-1823)
441	/** The RAM size differes between the saved state and the VM config. */
442	#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1824)
443	/** The state doesn't match the VM configuration in one or another way.
444	* (There are certain PCI reconfiguration which the OS could potentially
445	* do which can cause this problem. Check this out when it happens.) */
446	#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1825)
447	/** The virtual clock freqency differs too much.
448	* The clock source for the virtual time isn't reliable or the code have changed. */
449	#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1826)
450	/** A timeout occured while waiting for async IDE operations to finish. */
451	#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1827)
452	/** One of the structure magics was wrong. */
453	#define VERR_SSM_STRUCTURE_MAGIC (-1828)
454	/** The data in the saved state doesn't confirm to expectations. */
455	#define VERR_SSM_UNEXPECTED_DATA (-1829)
456	/** @} */
457
458
459	/** @name Virtual Machine (VM) Status Codes
460	* @{
461	*/
462	/** The specified at reset handler wasn't found. */
463	#define VERR_VM_ATRESET_NOT_FOUND (-1900)
464	/** Invalid VM request type.
465	* For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
466	* all the other occurences it means indicates corruption, broken logic, or stupid
467	* interface user. */
468	#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
469	/** Invalid VM request state.
470	* The state of the request packet was not the expected and accepted one(s). Either
471	* the interface user screwed up, or we've got corruption/broken logic. */
472	#define VERR_VM_REQUEST_STATE (-1902)
473	/** Invalid VM request packet.
474	* One or more of the the VM controlled packet members didn't contain the correct
475	* values. Some thing's broken. */
476	#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
477	/** The status field has not been updated yet as the request is still
478	* pending completion. Someone queried the iStatus field before the request
479	* has been fully processed. */
480	#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
481	/** The request has been freed, don't read the status now.
482	* Someone is reading the iStatus field of a freed request packet. */
483	#define VERR_VM_REQUEST_STATUS_FREED (-1905)
484	/** A VM api requiring EMT was called from another thread.
485	* Use the VMR3ReqCall() apis to call it! */
486	#define VERR_VM_THREAD_NOT_EMT (-1906)
487	/** The VM state was invalid for the requested operation.
488	* Go check the 'VM Statechart Diagram.gif'. */
489	#define VERR_VM_INVALID_VM_STATE (-1907)
490	/** The support driver is not installed.
491	* On linux, open returned ENOENT. */
492	#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
493	/** The support driver is not accessible.
494	* On linux, open returned EPERM. */
495	#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
496	/** Was not able to load the support driver.
497	* On linux, open returned ENODEV. */
498	#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
499	/** Was not able to open the support driver.
500	* Generic open error used when none of the other ones fit. */
501	#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
502	/** The installed support driver doesn't match the version of the user. */
503	#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
504	/** Saving the VM state is temporarily not allowed. Try again later. */
505	#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
506	/** @} */
507
508
509	/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
510	* @{
511	*/
512	/** Successful completion of operation (mapped to generic iprt status code). */
513	#define VINF_VRDP_SUCCESS VINF_SUCCESS
514	/** VRDP transport operation timed out (mapped to generic iprt status code). */
515	#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
516
517	/** Unsupported ISO protocol feature */
518	#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
519	/** Security (en/decryption) engine error */
520	#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
521	/** VRDP protocol violation */
522	#define VERR_VRDP_PROTOCOL_ERROR (-2002)
523	/** Unsupported VRDP protocol feature */
524	#define VERR_VRDP_NOT_SUPPORTED (-2003)
525	/** VRDP protocol violation, client sends less data than expected */
526	#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
527	/** Internal error, VRDP packet is in wrong operation mode */
528	#define VERR_VRDP_INVALID_MODE (-2005)
529	/** Memory allocation failed */
530	#define VERR_VRDP_NO_MEMORY (-2006)
531	/** Client has been rejected */
532	#define VERR_VRDP_ACCESS_DENIED (-2007)
533	/** VRPD receives a packet that is not supported */
534	#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
535	/** VRDP script allowed the packet to be processed further */
536	#define VINF_VRDP_PROCESS_PDU 2009
537	/** VRDP script has completed its task */
538	#define VINF_VRDP_OPERATION_COMPLETED 2010
539	/** VRDP thread has started OK and will run */
540	#define VINF_VRDP_THREAD_STARTED 2011
541	/** Framebuffer is resized, terminate send bitmap procedure */
542	#define VINF_VRDP_RESIZE_REQUESTED 2012
543	/** Output can be enabled for the client. */
544	#define VINF_VRDP_OUTPUT_ENABLE 2013
545	/** @} */
546
547
548	/** @name Configuration Manager (CFGM) Status Codes
549	* @{
550	*/
551	/** The integer value was too big for the requested representation. */
552	#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
553	/** Child node was not found. */
554	#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
555	/** Path to child node was invalid (i.e. empty). */
556	#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
557	/** Value not found. */
558	#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
559	/** No parent node specified. */
560	#define VERR_CFGM_NO_PARENT (-2104)
561	/** No node was specified. */
562	#define VERR_CFGM_NO_NODE (-2105)
563	/** The value is not an integer. */
564	#define VERR_CFGM_NOT_INTEGER (-2106)
565	/** The value is not a zero terminated character string. */
566	#define VERR_CFGM_NOT_STRING (-2107)
567	/** The value is not a byte string. */
568	#define VERR_CFGM_NOT_BYTES (-2108)
569	/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
570	#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
571	/** The path of a new node contained slashs or was empty. */
572	#define VERR_CFGM_INVALID_NODE_PATH (-2160)
573	/** A new node couldn't be inserted because one with the same name exists. */
574	#define VERR_CFGM_NODE_EXISTS (-2161)
575	/** A new leaf couldn't be inserted because one with the same name exists. */
576	#define VERR_CFGM_LEAF_EXISTS (-2162)
577	/** @} */
578
579
580	/** @name Time Manager (TM) Status Codes
581	* @{
582	*/
583	/** The loaded timer state was incorrect. */
584	#define VERR_TM_LOAD_STATE (-2200)
585	/** The timer was not in the correct state for the request operation. */
586	#define VERR_TM_INVALID_STATE (-2201)
587	/** The timer was in a unknown state. Corruption or stupid coding error. */
588	#define VERR_TM_UNKNOWN_STATE (-2202)
589	/** The timer was stuck in an unstable state until we grew impatient and returned. */
590	#define VERR_TM_UNSTABLE_STATE (-2203)
591	/** @} */
592
593
594	/** @name Recompiled Execution Manager (REM) Status Codes
595	* @{
596	*/
597	/** Fatal error in virtual hardware. */
598	#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
599	/** Fatal error in the recompiler cpu. */
600	#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
601	/** Recompiler execution was interrupted by forced action. */
602	#define VINF_REM_INTERRUPED_FF 2302
603	/** Reason for leaving GC: Must flush pending invlpg operations to REM.
604	* Tell REM to flush page invalidations. Will temporary go to REM context
605	* from REM and perform the flushes. */
606	#define VERR_REM_FLUSHED_PAGES_OVERFLOW (-2303)
607	/** Too many similar traps. This is a very useful debug only
608	* check (we don't do double/tripple faults in REM). */
609	#define VERR_REM_TOO_MANY_TRAPS (-2304)
610	/** The REM is out of breakpoint slots. */
611	#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
612	/** The REM could not find any breakpoint on the specified address. */
613	#define VERR_REM_BP_NOT_FOUND (-2306)
614	/** @} */
615
616
617	/** @name Trap Manager / Monitor (TRPM) Status Codes
618	* @{
619	*/
620	/** No active trap. Cannot query or reset a non-existing trap. */
621	#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
622	/** Active trap. Cannot assert a new trap when when one is already active. */
623	#define VERR_TRPM_ACTIVE_TRAP (-2401)
624	/** Reason for leaving GC: Guest tried to write to our IDT - fatal.
625	* The VM will be terminated assuming the worst, i.e. that the
626	* guest has read the idtr register. */
627	#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
628	/** Reason for leaving GC: Fatal trap in hypervisor. */
629	#define VERR_TRPM_DONT_PANIC (-2403)
630	/** Reason for leaving GC: Double Fault. */
631	#define VERR_TRPM_PANIC (-2404)
632	/** The exception was dispatched for raw-mode execution. */
633	#define VINF_TRPM_XCPT_DISPATCHED 2405
634	/** @} */
635
636
637	/** @name Selector Manager / Monitor (SELM) Status Code
638	* @{
639	*/
640	/** Reason for leaving GC: Guest tried to write to our GDT - fatal.
641	* The VM will be terminated assuming the worst, i.e. that the
642	* guest has read the gdtr register. */
643	#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
644	/** Reason for leaving GC: Guest tried to write to our LDT - fatal.
645	* The VM will be terminated assuming the worst, i.e. that the
646	* guest has read the ldtr register. */
647	#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
648	/** Reason for leaving GC: Guest tried to write to our TSS - fatal.
649	* The VM will be terminated assuming the worst, i.e. that the
650	* guest has read the ltr register. */
651	#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
652	/** Reason for leaving GC: Sync the GDT table to solve a conflict. */
653	#define VINF_SELM_SYNC_GDT 2503
654	/** No valid TSS present. */
655	#define VERR_SELM_NO_TSS (-2504)
656	/** @} */
657
658
659	/** @name I/O Manager / Monitor (IOM) Status Code
660	* @{
661	*/
662	/** The specified I/O port range was invalid.
663	* It was either empty or it was out of bounds. */
664	#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
665	/** The specified GC I/O port range didn't have a corresponding HC range.
666	* IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */
667	#define VERR_IOM_NO_HC_IOPORT_RANGE (-2601)
668	/** The specified I/O port range intruded on an existing range. There is
669	* a I/O port conflict between two device, or a device tried to register
670	* the same range twice. */
671	#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
672	/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
673	#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
674	/** The specified I/O port range was owned by some other device(s). Both registration
675	* and deregistration, but in the first case only GC ranges. */
676	#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
677
678	/** The specified MMIO range was invalid.
679	* It was either empty or it was out of bounds. */
680	#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
681	/** The specified GC MMIO range didn't have a corresponding HC range.
682	* IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */
683	#define VERR_IOM_NO_HC_MMIO_RANGE (-2606)
684	/** The specified MMIO range was owned by some other device(s). Both registration
685	* and deregistration, but in the first case only GC ranges. */
686	#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
687	/** The specified MMIO range intruded on an existing range. There is
688	* a MMIO conflict between two device, or a device tried to register
689	* the same range twice. */
690	#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
691	/** The MMIO range specified for removal was not found. */
692	#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
693	/** The MMIO range specified for removal was invalid. The range didn't match
694	* quite match a set of existing ranges. It's not possible to remove parts of
695	* a MMIO range, only one or more full ranges. */
696	#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
697	/** An invalid I/O port size was specified for a read or write operation. */
698	#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
699	/** The MMIO handler was called for a bogus address! Internal error! */
700	#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
701	/** The MMIO handler experienced a problem with the disassembler. */
702	#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
703	/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
704	#define VERR_IOM_IOPORT_UNUSED (-2614)
705	/** Unused MMIO register read, fill with 00. */
706	#define VINF_IOM_MMIO_UNUSED_00 2615
707	/** Unused MMIO register read, fill with FF. */
708	#define VINF_IOM_MMIO_UNUSED_FF 2616
709
710	/** Reason for leaving GC: I/O port read. */
711	#define VINF_IOM_HC_IOPORT_READ 2620
712	/** Reason for leaving GC: I/O port write. */
713	#define VINF_IOM_HC_IOPORT_WRITE 2621
714	/** Reason for leaving GC: MMIO write. */
715	#define VINF_IOM_HC_MMIO_READ 2623
716	/** Reason for leaving GC: MMIO read. */
717	#define VINF_IOM_HC_MMIO_WRITE 2624
718	/** Reason for leaving GC: MMIO read/write. */
719	#define VINF_IOM_HC_MMIO_READ_WRITE 2625
720	/** @} */
721
722
723	/** @name Virtual Machine Monitor (VMM) Status Codes
724	* @{
725	*/
726	/** Reason for leaving GC: Calling host function. */
727	#define VINF_VMM_CALL_HOST 2700
728	/** @} */
729
730
731	/** @name Pluggable Device and Driver Manager (PDM) Status Codes
732	* @{
733	*/
734	/** An invalid LUN specification was given. */
735	#define VERR_PDM_NO_SUCH_LUN (-2800)
736	/** A device encountered an unknown configuration value.
737	* This means that the device is potentially misconfigured and the device
738	* construction or unit attachment failed because of this. */
739	#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
740	/** The above driver doesn't export a interface required by a driver being
741	* attached to it. Typical misconfiguration problem. */
742	#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
743	/** The below driver doesn't export a interface required by the drive
744	* having attached it. Typical misconfiguration problem. */
745	#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
746	/** A device didn't find a required interface with an attached driver.
747	* Typical misconfiguration problem. */
748	#define VERR_PDM_MISSING_INTERFACE (-2804)
749	/** A driver encountered an unknown configuration value.
750	* This means that the driver is potentially misconfigured and the driver
751	* construction. */
752	#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
753	/** The PCI bus assigned to a device didn't have room for it.
754	* Either too many devices are configured on the same PCI bus, or there are
755	* some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
756	#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
757	/** A queue is out of free items, the queueing operation failed. */
758	#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
759	/** Not possible to attach further drivers to the driver.
760	* A driver which doesn't support attachments (below of course) will
761	* return this status code if it found that further drivers were configured
762	* to be attached to it. */
763	#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
764	/** Not possible to attach drivers to the device.
765	* A device which doesn't support attachments (below of course) will
766	* return this status code if it found that drivers were configured
767	* to be attached to it. */
768	#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
769	/** No attached driver.
770	* The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
771	* this error when no driver was configured to be attached. */
772	#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
773	/** The media geometry hasn't been set yet, so it cannot be obtained.
774	* The caller should then calculate the geometry from the media size. */
775	#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
776	/** The media translation hasn't been set yet, so it cannot be obtained.
777	* The caller should then guess the translation. */
778	#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
779	/** The media is not mounted, operation requires a mounted media. */
780	#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
781	/** Mount failed because a media was already mounted. Unmount the media
782	* and retry the mount. */
783	#define VERR_PDM_MEDIA_MOUNTED (-2814)
784	/** The media is locked and cannot be unmounted. */
785	#define VERR_PDM_MEDIA_LOCKED (-2815)
786	/** No 'Type' attribute in the DrvBlock configuration.
787	* Misconfiguration. */
788	#define VERR_PDM_BLOCK_NO_TYPE (-2816)
789	/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
790	* Misconfiguration. */
791	#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
792	/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
793	* Misconfiguration. */
794	#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
795	/** The block driver type wasn't supported.
796	* Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
797	#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
798	/** A attach or prepare mount call failed because the driver already
799	* had a driver attached. */
800	#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
801	/** An attempt on deattaching a driver without anyone actually being attached, or
802	* performing any other operation on an attached driver. */
803	#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
804	/** The attached driver configuration is missing the 'Driver' attribute. */
805	#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
806	/** The configured driver wasn't found.
807	* Either the necessary driver modules wasn't loaded, the name was
808	* misspelled, or it was a misconfiguration. */
809	#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
810	/** The Ring-3 module was already loaded. */
811	#define VINF_PDM_ALREADY_LOADED (2824)
812	/** The name of the module clashed with an existing module. */
813	#define VERR_PDM_MODULE_NAME_CLASH (-2825)
814	/** Couldn't find any export for registration of drivers/devices. */
815	#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
816	/** A module name is too long. */
817	#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
818	/** Driver name clash. Another driver with the same name as the
819	* one begin registred exists. */
820	#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
821	/** The version of the driver registration structure is unknown
822	* to this VBox version. Either mixing incompatible versions or
823	* the structure isn't correctly initialized. */
824	#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
825	/** Invalid entry in the driver registration structure. */
826	#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
827	/** Invalid host bit mask. */
828	#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
829	/** Not possible to detach a driver because the above driver/device
830	* doesn't support it. The above entity doesn't implement the pfnDetach call. */
831	#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
832	/** No PCI Bus is available to register the device with. This is usually a
833	* misconfiguration or in rare cases a buggy pci device. */
834	#define VERR_PDM_NO_PCI_BUS (-2833)
835	/** The device is not a registered PCI device and thus cannot
836	* perform any PCI operations. The device forgot to register it self. */
837	#define VERR_PDM_NOT_PCI_DEVICE (-2834)
838
839	/** The version of the device registration structure is unknown
840	* to this VBox version. Either mixing incompatible versions or
841	* the structure isn't correctly initialized. */
842	#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
843	/** Invalid entry in the device registration structure. */
844	#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
845	/** Invalid host bit mask. */
846	#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
847	/** The guest bit mask didn't match the guest being loaded. */
848	#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
849	/** Device name clash. Another device with the same name as the
850	* one begin registred exists. */
851	#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
852	/** The device wasn't found. There was no registered device
853	* by that name. */
854	#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
855	/** The device instance was not found. */
856	#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
857	/** The device instance have no base interface. */
858	#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
859	/** The device instance have no such logical unit. */
860	#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
861	/** The driver instance could not be found. */
862	#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
863	/** Logical Unit was not found. */
864	#define VERR_PDM_LUN_NOT_FOUND (-2845)
865	/** The Logical Unit was found, but it had no driver attached to it. */
866	#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
867	/** The Logical Unit was found, but it had no driver attached to it. */
868	#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
869	/** No PIC device instance is registered with the current VM and thus
870	* the PIC operation cannot be performed. */
871	#define VERR_PDM_NO_PIC_INSTANCE (-2847)
872	/** No APIC device instance is registered with the current VM and thus
873	* the APIC operation cannot be performed. */
874	#define VERR_PDM_NO_APIC_INSTANCE (-2848)
875	/** No DMAC device instance is registered with the current VM and thus
876	* the DMA operation cannot be performed. */
877	#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
878	/** No RTC device instance is registered with the current VM and thus
879	* the RTC or CMOS operation cannot be performed. */
880	#define VERR_PDM_NO_RTC_INSTANCE (-2850)
881	/** Unable to open the host interface due to a sharing violation . */
882	#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
883	/** Unable to open the host interface. */
884	#define VERR_PDM_HIF_OPEN_FAILED (-2852)
885	/** The device doesn't support runtime driver attaching.
886	* The PDMDEVREG::pfnAttach callback function is NULL. */
887	#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
888	/** The device doesn't support runtime driver detaching.
889	* The PDMDEVREG::pfnDetach callback function is NULL. */
890	#define VERR_PDM_DEVICE_NO_RT_DETACH (-2854)
891	/** Invalid host interface version. */
892	#define VERR_PDM_HIF_INVALID_VERSION (-2855)
893
894	/** @} */
895
896
897	/** @name Host-Guest Communication Manager (HGCM) Status Codes
898	* @{
899	*/
900	/** Requested service does not exist. */
901	#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
902	/** Service rejected client connection */
903	#define VINF_HGCM_CLIENT_REJECTED 2901
904	/** Command address is invalid. */
905	#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
906	/** Service will execute the command in background. */
907	#define VINF_HGCM_ASYNC_EXECUTE 2903
908	/** HGCM could not perform requested operation because of an internal error. */
909	#define VERR_HGCM_INTERNAL (-2904)
910	/** Invalid HGCM client id. */
911	#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
912	/** The HGCM is saving state. */
913	#define VINF_HGCM_SAVE_STATE (2906)
914	/** Requested service already exists. */
915	#define VERR_HGCM_SERVICE_EXISTS (-2907)
916
917	/** @} */
918
919
920	/** @name Network Address Translation Driver (DrvNAT) Status Codes
921	* @{
922	*/
923	/** Failed to find the DNS configured for this machine. */
924	#define VINF_NAT_DNS 3000
925	/** Failed to convert the specified Guest IP to a binary IP address.
926	* Malformed input. */
927	#define VERR_NAT_REDIR_GUEST_IP (-3001)
928	/** Failed while setting up a redirector rule.
929	* There probably is a conflict between the rule and some existing
930	* service on the computer. */
931	#define VERR_NAT_REDIR_SETUP (-3002)
932	/** @} */
933
934
935	/** @name HostIF Driver (DrvTUN) Status Codes
936	* @{
937	*/
938	/** The Host Interface Networking init program failed. */
939	#define VERR_HOSTIF_INIT_FAILED (-3100)
940	/** The Host Interface Networking device name is too long. */
941	#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
942	/** The Host Interface Networking name config IOCTL call failed. */
943	#define VERR_HOSTIF_IOCTL (-3102)
944	/** Failed to make the Host Interface Networking handle non-blocking. */
945	#define VERR_HOSTIF_BLOCKING (-3103)
946	/** If a Host Interface Networking filehandle was specified it's not allowed to
947	* have any init or term programs. */
948	#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
949	/** @} */
950
951
952	/** @name VBox HDD Container (VDI) Status Codes
953	* @{
954	*/
955	/** Invalid image file header. */
956	#define VERR_VDI_INVALID_HEADER (-3200)
957	/** Invalid image file header: invalid signature. */
958	#define VERR_VDI_INVALID_SIGNATURE (-3201)
959	/** Invalid image file header: invalid version. */
960	#define VERR_VDI_UNSUPPORTED_VERSION (-3202)
961	/** Invalid image type. */
962	#define VERR_VDI_INVALID_TYPE (-3203)
963	/** Invalid image flags. */
964	#define VERR_VDI_INVALID_FLAGS (-3204)
965	/** Operation can't be done in current HDD container state. */
966	#define VERR_VDI_INVALID_STATE (-3205)
967	/** Differencing image can't be used with current base image. */
968	#define VERR_VDI_WRONG_DIFF_IMAGE (-3206)
969	/** Two or more images of one HDD has different versions. */
970	#define VERR_VDI_IMAGES_VERSION_MISMATCH (-3207)
971	/** Differencing and parent images can't be used together due to UUID. */
972	#define VERR_VDI_IMAGES_UUID_MISMATCH (-3208)
973	/** No differencing images to commit. */
974	#define VERR_VDI_NO_DIFF_IMAGES (-3209)
975	/** Virtual HDD is not opened. */
976	#define VERR_VDI_NOT_OPENED (-3210)
977	/** Requested image is not opened. */
978	#define VERR_VDI_IMAGE_NOT_FOUND (-3211)
979	/** Image is read-only. */
980	#define VERR_VDI_IMAGE_READ_ONLY (-3212)
981	/** Comment string is too long. */
982	#define VERR_VDI_COMMENT_TOO_LONG (-3213)
983	/** Geometry hasn't been set. */
984	#define VERR_VDI_GEOMETRY_NOT_SET (-3214)
985	/** No data for this block in image. */
986	#define VINF_VDI_BLOCK_FREE 3215
987	/** Configuration value not found. */
988	#define VERR_VDI_VALUE_NOT_FOUND (-3216)
989	/** @} */
990
991
992	/** @name VBox Guest Library (VBGL) Status Codes
993	* @{
994	*/
995	/** Library was not initialized. */
996	#define VERR_VBGL_NOT_INITIALIZED (-3300)
997	/** Virtual address was not allocated by the library. */
998	#define VERR_VBGL_INVALID_ADDR (-3301)
999	/** IOCtl to VBoxGuest driver failed. */
1000	#define VERR_VBGL_IOCTL_FAILED (-3302)
1001	/** @} */
1002
1003
1004	/** @name VBox USB (VUSB) Status Codes
1005	* @{
1006	*/
1007	/** No available ports on the hub.
1008	* This error is returned when a device is attempted created and/or attached
1009	* to a hub which is out of ports. */
1010	#define VERR_VUSB_NO_PORTS (-3400)
1011	/** The requested operation cannot be performed on a detached USB device. */
1012	#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1013	/** Failed to allocate memory for a URB. */
1014	#define VERR_VUSB_NO_URB_MEMORY (-3402)
1015	/** General failure during URB queuing.
1016	* This will go away when the queueing gets proper status code handling. */
1017	#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1018	/** Device creation failed because the USB device name was not found. */
1019	#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1020	/** Not permitted to open the USB device.
1021	* The user doesn't have access to the device in the usbfs, check the mount options. */
1022	#define VERR_VUSB_USBFS_PERMISSION (-3405)
1023	/** The requested operation cannot be performed because the device
1024	* is currently being reset. */
1025	#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1026	/** @} */
1027
1028
1029	/** @name VBox VGA Status Codes
1030	* @{
1031	*/
1032	/** One of the custom modes was incorrect.
1033	* The format or bit count of the custom mode value is invalid. */
1034	#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1035	/** The display connector is resizing. */
1036	#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1037	/** @} */
1038
1039
1040	/** @name VBox VMX Status Codes
1041	* @{
1042	*/
1043	/** Invalid VMCS index or write to read-only element. */
1044	#define VERR_VMX_INVALID_VMCS_FIELD (-4000)
1045	/** Invalid VMCS pointer. */
1046	#define VERR_VMX_INVALID_VMCS_PTR (-4001)
1047	/** Invalid VMXON pointer. */
1048	#define VERR_VMX_INVALID_VMXON_PTR (-4002)
1049	/** Generic VMX failure. */
1050	#define VERR_VMX_GENERIC (-4003)
1051	/** Invalid CPU mode for VMX execution. */
1052	#define VERR_VMX_UNSUPPORTED_MODE (-4004)
1053	/** Unable to start VM execution. */
1054	#define VERR_VMX_UNABLE_TO_START_VM (-4005)
1055	/** Unable to resume VM execution. */
1056	#define VERR_VMX_UNABLE_TO_RESUME_VM (-4006)
1057	/** Unable to switch due to invalid host state. */
1058	#define VERR_VMX_INVALID_HOST_STATE (-4007)
1059	/** @} */
1060
1061	/** @name VBox SVM Status Codes
1062	* @{
1063	*/
1064	/** Unable to start VM execution. */
1065	#define VERR_SVM_UNABLE_TO_START_VM (-4050)
1066	/** @} */
1067
1068	/* SED-END */
1069
1070
1071	/** @def VBOX_SUCCESS
1072	* Check for success.
1073	*
1074	* @returns true if rc indicates success.
1075	* @returns false if rc indicates failure.
1076	*
1077	* @param rc The iprt status code to test.
1078	*/
1079	#define VBOX_SUCCESS(rc) RT_SUCCESS(rc)
1080
1081	/** @def VBOX_FAILURE
1082	* Check for failure.
1083	*
1084	* @returns true if rc indicates failure.
1085	* @returns false if rc indicates success.
1086	*
1087	* @param rc The iprt status code to test.
1088	*/
1089	#define VBOX_FAILURE(rc) RT_FAILURE(rc)
1090
1091	/** @} */
1092
1093
1094	#endif
1095

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/err.h@ 3269

Download in other formats: