/** @file * Debugger Interfaces. * * This header covers all external interfaces of the Debugger module. * However, it does not cover the DBGF interface since that part of the * VMM. Use dbgf.h for that. */ /* * Copyright (C) 2006-2007 Sun Microsystems, Inc. * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa * Clara, CA 95054 USA or visit http://www.sun.com if you need * additional information or have any questions. */ #ifndef ___VBox_dbg_h #define ___VBox_dbg_h #include #include #include #include __BEGIN_DECLS /** @def VBOX_WITH_DEBUGGER * The build is with debugger module. Test if this is defined before registering * external debugger commands. This is normally defined in Config.kmk. */ #ifdef DOXYGEN_RUNNING # define VBOX_WITH_DEBUGGER #endif /** * DBGC variable category. * * Used to describe an argument to a command or function and a functions * return value. */ typedef enum DBGCVARCAT { /** Any type is fine. */ DBGCVAR_CAT_ANY = 0, /** Any kind of pointer. */ DBGCVAR_CAT_POINTER, /** Any kind of pointer with no range option. */ DBGCVAR_CAT_POINTER_NO_RANGE, /** GC pointer. */ DBGCVAR_CAT_GC_POINTER, /** GC pointer with no range option. */ DBGCVAR_CAT_GC_POINTER_NO_RANGE, /** Numeric argument. */ DBGCVAR_CAT_NUMBER, /** Numeric argument with no range option. */ DBGCVAR_CAT_NUMBER_NO_RANGE, /** String. */ DBGCVAR_CAT_STRING, /** Symbol. */ DBGCVAR_CAT_SYMBOL, /** Option. */ DBGCVAR_CAT_OPTION, /** Option + string. */ DBGCVAR_CAT_OPTION_STRING, /** Option + number. */ DBGCVAR_CAT_OPTION_NUMBER } DBGCVARCAT; /** * DBGC variable type. */ typedef enum DBGCVARTYPE { /** unknown... */ DBGCVAR_TYPE_UNKNOWN = 0, /** Flat GC pointer. */ DBGCVAR_TYPE_GC_FLAT, /** Segmented GC pointer. */ DBGCVAR_TYPE_GC_FAR, /** Physical GC pointer. */ DBGCVAR_TYPE_GC_PHYS, /** Flat HC pointer. */ DBGCVAR_TYPE_HC_FLAT, /** Segmented HC pointer. */ DBGCVAR_TYPE_HC_FAR, /** Physical HC pointer. */ DBGCVAR_TYPE_HC_PHYS, /** String. */ DBGCVAR_TYPE_STRING, /** Number. */ DBGCVAR_TYPE_NUMBER, /** Symbol. */ DBGCVAR_TYPE_SYMBOL, /** Special type used when querying symbols. */ DBGCVAR_TYPE_ANY } DBGCVARTYPE; /** @todo Rename to DBGCVAR_IS_xyz. */ /** Checks if the specified variable type is of a pointer persuasion. */ #define DBGCVAR_ISPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_GC_FLAT && enmType <= DBGCVAR_TYPE_HC_PHYS) /** Checks if the specified variable type is of a pointer persuasion. */ #define DBGCVAR_IS_FAR_PTR(enmType) ((enmType) == DBGCVAR_TYPE_GC_FAR || (enmType) == DBGCVAR_TYPE_HC_FAR) /** Checks if the specified variable type is of a pointer persuasion and of the guest context sort. */ #define DBGCVAR_ISGCPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_GC_FLAT && (enmType) <= DBGCVAR_TYPE_GC_PHYS) /** Checks if the specified variable type is of a pointer persuasion and of the host context sort. */ #define DBGCVAR_ISHCPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_HC_FLAT && (enmType) <= DBGCVAR_TYPE_HC_PHYS) /** * DBGC variable range type. */ typedef enum DBGCVARRANGETYPE { /** No range appliable or no range specified. */ DBGCVAR_RANGE_NONE = 0, /** Number of elements. */ DBGCVAR_RANGE_ELEMENTS, /** Number of bytes. */ DBGCVAR_RANGE_BYTES } DBGCVARRANGETYPE; /** * Variable descriptor. */ typedef struct DBGCVARDESC { /** The minimal number of times this argument may occur. * Use 0 here to inidicate that the argument is optional. */ unsigned cTimesMin; /** Maximum number of occurences. * Use ~0 here to indicate infinite. */ unsigned cTimesMax; /** Argument category. */ DBGCVARCAT enmCategory; /** Flags, DBGCVD_FLAGS_* */ unsigned fFlags; /** Argument name. */ const char *pszName; /** Argument name. */ const char *pszDescription; } DBGCVARDESC; /** Pointer to an argument descriptor. */ typedef DBGCVARDESC *PDBGCVARDESC; /** Pointer to a const argument descriptor. */ typedef const DBGCVARDESC *PCDBGCVARDESC; /** Variable descriptor flags. * @{ */ /** Indicates that the variable depends on the previous being present. */ #define DBGCVD_FLAGS_DEP_PREV RT_BIT(1) /** @} */ /** * DBGC variable. */ typedef struct DBGCVAR { /** Pointer to the argument descriptor. */ PCDBGCVARDESC pDesc; /** Pointer to the next argument. */ struct DBGCVAR *pNext; /** Argument type. */ DBGCVARTYPE enmType; /** Type specific. */ union { /** Flat GC Address. (DBGCVAR_TYPE_GC_FLAT) */ RTGCPTR GCFlat; /** Far (16:32) GC Address. (DBGCVAR_TYPE_GC_FAR) */ RTFAR32 GCFar; /** Physical GC Address. (DBGCVAR_TYPE_GC_PHYS) */ RTGCPHYS GCPhys; /** Flat HC Address. (DBGCVAR_TYPE_HC_FLAT) */ void *pvHCFlat; /** Far (16:32) HC Address. (DBGCVAR_TYPE_HC_FAR) */ RTFAR32 HCFar; /** Physical GC Address. (DBGCVAR_TYPE_HC_PHYS) */ RTHCPHYS HCPhys; /** String. (DBGCVAR_TYPE_STRING) * The basic idea is the the this is a pointer to the expression we're * parsing, so no messing with freeing. */ const char *pszString; /** Number. (DBGCVAR_TYPE_NUMBER) */ uint64_t u64Number; } u; /** Range type. */ DBGCVARRANGETYPE enmRangeType; /** Range. The use of the content depends on the enmRangeType. */ uint64_t u64Range; } DBGCVAR; /** Pointer to a command argument. */ typedef DBGCVAR *PDBGCVAR; /** Pointer to a const command argument. */ typedef const DBGCVAR *PCDBGCVAR; /** * Macro for initializing a DBGC variable with defaults. * The result is an unknown variable type without any range. */ #define DBGCVAR_INIT(pVar) \ do { \ (pVar)->pDesc = NULL;\ (pVar)->pNext = NULL; \ (pVar)->enmType = DBGCVAR_TYPE_UNKNOWN; \ (pVar)->u.u64Number = 0; \ (pVar)->enmRangeType = DBGCVAR_RANGE_NONE; \ (pVar)->u64Range = 0; \ } while (0) /** * Macro for initializing a DBGC variable with a HC physical address. */ #define DBGCVAR_INIT_HC_PHYS(pVar, Phys) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_HC_PHYS; \ (pVar)->u.HCPhys = (Phys); \ } while (0) /** * Macro for initializing a DBGC variable with a HC flat address. */ #define DBGCVAR_INIT_HC_FLAT(pVar, Flat) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_HC_FLAT; \ (pVar)->u.pvHCFlat = (Flat); \ } while (0) /** * Macro for initializing a DBGC variable with a GC physical address. */ #define DBGCVAR_INIT_GC_PHYS(pVar, Phys) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_GC_PHYS; \ (pVar)->u.GCPhys = (Phys); \ } while (0) /** * Macro for initializing a DBGC variable with a GC flat address. */ #define DBGCVAR_INIT_GC_FLAT(pVar, Flat) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_GC_FLAT; \ (pVar)->u.GCFlat = (Flat); \ } while (0) /** * Macro for initializing a DBGC variable with a GC far address. */ #define DBGCVAR_INIT_GC_FAR(pVar, _sel, _off) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_GC_FAR; \ (pVar)->u.GCFar.sel = (_sel); \ (pVar)->u.GCFar.off = (_off); \ } while (0) /** * Macro for initializing a DBGC variable with a number */ #define DBGCVAR_INIT_NUMBER(pVar, Value) \ do { \ DBGCVAR_INIT(pVar); \ (pVar)->enmType = DBGCVAR_TYPE_NUMBER; \ (pVar)->u.u64 = (Value); \ } while (0) /** Pointer to helper functions for commands. */ typedef struct DBGCCMDHLP *PDBGCCMDHLP; /** * Command helper for writing text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pvBuf What to write. * @param cbBuf Number of bytes to write. * @param pcbWritten Where to store the number of bytes actually written. * If NULL the entire buffer must be successfully written. */ typedef DECLCALLBACK(int) FNDBGCHLPWRITE(PDBGCCMDHLP pCmdHlp, const void *pvBuf, size_t cbBuf, size_t *pcbWritten); /** Pointer to a FNDBGCHLPWRITE() function. */ typedef FNDBGCHLPWRITE *PFNDBGCHLPWRITE; /** * Command helper for writing formatted text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pcb Where to store the number of bytes written. * @param pszFormat The format string. * This is using the log formatter, so it's format extensions can be used. * @param ... Arguments specified in the format string. */ typedef DECLCALLBACK(int) FNDBGCHLPPRINTF(PDBGCCMDHLP pCmdHlp, size_t *pcbWritten, const char *pszFormat, ...); /** Pointer to a FNDBGCHLPPRINTF() function. */ typedef FNDBGCHLPPRINTF *PFNDBGCHLPPRINTF; /** * Command helper for writing formatted text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pcb Where to store the number of bytes written. * @param pszFormat The format string. * This is using the log formatter, so it's format extensions can be used. * @param args Arguments specified in the format string. */ typedef DECLCALLBACK(int) FNDBGCHLPPRINTFV(PDBGCCMDHLP pCmdHlp, size_t *pcbWritten, const char *pszFormat, va_list args); /** Pointer to a FNDBGCHLPPRINTFV() function. */ typedef FNDBGCHLPPRINTFV *PFNDBGCHLPPRINTFV; /** * Command helper for formatting and error message for a VBox status code. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param rc The VBox status code. * @param pcb Where to store the number of bytes written. * @param pszFormat Format string for additional messages. Can be NULL. * @param ... Format arguments, optional. */ typedef DECLCALLBACK(int) FNDBGCHLPVBOXERROR(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, ...); /** Pointer to a FNDBGCHLPVBOXERROR() function. */ typedef FNDBGCHLPVBOXERROR *PFNDBGCHLPVBOXERROR; /** * Command helper for formatting and error message for a VBox status code. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param rc The VBox status code. * @param pcb Where to store the number of bytes written. * @param pszFormat Format string for additional messages. Can be NULL. * @param args Format arguments, optional. */ typedef DECLCALLBACK(int) FNDBGCHLPVBOXERRORV(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, va_list args); /** Pointer to a FNDBGCHLPVBOXERRORV() function. */ typedef FNDBGCHLPVBOXERRORV *PFNDBGCHLPVBOXERRORV; /** * Command helper for reading memory specified by a DBGC variable. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pVM VM handle if GC or physical HC address. * @param pvBuffer Where to store the read data. * @param cbRead Number of bytes to read. * @param pVarPointer DBGC variable specifying where to start reading. * @param pcbRead Where to store the number of bytes actually read. * This optional, but it's useful when read GC virtual memory where a * page in the requested range might not be present. * If not specified not-present failure or end of a HC physical page * will cause failure. */ typedef DECLCALLBACK(int) FNDBGCHLPMEMREAD(PDBGCCMDHLP pCmdHlp, PVM pVM, void *pvBuffer, size_t cbRead, PCDBGCVAR pVarPointer, size_t *pcbRead); /** Pointer to a FNDBGCHLPMEMREAD() function. */ typedef FNDBGCHLPMEMREAD *PFNDBGCHLPMEMREAD; /** * Command helper for writing memory specified by a DBGC variable. * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pVM VM handle if GC or physical HC address. * @param pvBuffer What to write. * @param cbWrite Number of bytes to write. * @param pVarPointer DBGC variable specifying where to start reading. * @param pcbWritten Where to store the number of bytes written. * This is optional. If NULL be aware that some of the buffer * might have been written to the specified address. */ typedef DECLCALLBACK(int) FNDBGCHLPMEMWRITE(PDBGCCMDHLP pCmdHlp, PVM pVM, const void *pvBuffer, size_t cbWrite, PCDBGCVAR pVarPointer, size_t *pcbWritten); /** Pointer to a FNDBGCHLPMEMWRITE() function. */ typedef FNDBGCHLPMEMWRITE *PFNDBGCHLPMEMWRITE; /** * Evaluates an expression. * (Hopefully the parser and functions are fully reentrant.) * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pResult Where to store the result. * @param pszExpr The expression. Format string with the format DBGC extensions. * @param ... Format arguments. */ typedef DECLCALLBACK(int) FNDBGCHLPEVAL(PDBGCCMDHLP pCmdHlp, PDBGCVAR pResult, const char *pszExpr, ...); /** Pointer to a FNDBGCHLPEVAL() function. */ typedef FNDBGCHLPEVAL *PFNDBGCHLPEVAL; /** * Executes command an expression. * (Hopefully the parser and functions are fully reentrant.) * * @returns VBox status code appropriate to return from a command. * @param pCmdHlp Pointer to the command callback structure. * @param pszExpr The expression. Format string with the format DBGC extensions. * @param ... Format arguments. */ typedef DECLCALLBACK(int) FNDBGCHLPEXEC(PDBGCCMDHLP pCmdHlp, const char *pszExpr, ...); /** Pointer to a FNDBGCHLPEVAL() function. */ typedef FNDBGCHLPEXEC *PFNDBGCHLPEXEC; /** * Helper functions for commands. */ typedef struct DBGCCMDHLP { /** Pointer to a FNDBCHLPWRITE() function. */ PFNDBGCHLPWRITE pfnWrite; /** Pointer to a FNDBGCHLPPRINTF() function. */ PFNDBGCHLPPRINTF pfnPrintf; /** Pointer to a FNDBGCHLPPRINTFV() function. */ PFNDBGCHLPPRINTFV pfnPrintfV; /** Pointer to a FNDBGCHLPVBOXERROR() function. */ PFNDBGCHLPVBOXERROR pfnVBoxError; /** Pointer to a FNDBGCHLPVBOXERRORV() function. */ PFNDBGCHLPVBOXERRORV pfnVBoxErrorV; /** Pointer to a FNDBGCHLPMEMREAD() function. */ PFNDBGCHLPMEMREAD pfnMemRead; /** Pointer to a FNDBGCHLPMEMWRITE() function. */ PFNDBGCHLPMEMWRITE pfnMemWrite; /** Pointer to a FNDBGCHLPEVAL() function. */ PFNDBGCHLPEVAL pfnEval; /** Pointer to a FNDBGCHLPEXEC() function. */ PFNDBGCHLPEXEC pfnExec; /** * Converts a DBGC variable to a DBGF address structure. * * @returns VBox status code. * @param pCmdHlp Pointer to the command callback structure. * @param pVar The variable to convert. * @param pAddress The target address. */ DECLCALLBACKMEMBER(int, pfnVarToDbgfAddr)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, PDBGFADDRESS pAddress); /** * Converts a DBGC variable to a boolean. * * @returns VBox status code. * @param pCmdHlp Pointer to the command callback structure. * @param pVar The variable to convert. * @param pf Where to store the boolean. */ DECLCALLBACKMEMBER(int, pfnVarToBool)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, bool *pf); } DBGCCMDHLP; #ifdef IN_RING3 /** * Command helper for writing formatted text to the debug console. * * @returns VBox status. * @param pCmdHlp Pointer to the command callback structure. * @param pszFormat The format string. * This is using the log formatter, so it's format extensions can be used. * @param ... Arguments specified in the format string. */ DECLINLINE(int) DBGCCmdHlpPrintf(PDBGCCMDHLP pCmdHlp, const char *pszFormat, ...) { va_list va; int rc; va_start(va, pszFormat); rc = pCmdHlp->pfnPrintfV(pCmdHlp, NULL, pszFormat, va); va_end(va); return rc; } /** * @copydoc FNDBGCHLPVBOXERROR */ DECLINLINE(int) DBGCCmdHlpVBoxError(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, ...) { va_list va; va_start(va, pszFormat); rc = pCmdHlp->pfnVBoxErrorV(pCmdHlp, rc, pszFormat, va); va_end(va); return rc; } /** * @copydoc FNDBGCHLPMEMREAD */ DECLINLINE(int) DBGCCmdHlpMemRead(PDBGCCMDHLP pCmdHlp, PVM pVM, void *pvBuffer, size_t cbRead, PCDBGCVAR pVarPointer, size_t *pcbRead) { return pCmdHlp->pfnMemRead(pCmdHlp, pVM, pvBuffer, cbRead, pVarPointer, pcbRead); } #endif /* IN_RING3 */ /** Pointer to command descriptor. */ typedef struct DBGCCMD *PDBGCCMD; /** Pointer to const command descriptor. */ typedef const struct DBGCCMD *PCDBGCCMD; /** * Command handler. * * The console will call the handler for a command once it's finished * parsing the user input. The command handler function is responsible * for executing the command itself. * * @returns VBox status. * @param pCmd Pointer to the command descriptor (as registered). * @param pCmdHlp Pointer to command helper functions. * @param pVM Pointer to the current VM (if any). * @param paArgs Pointer to (readonly) array of arguments. * @param cArgs Number of arguments in the array. * @param pResult Where to store the result. NULL if no result descriptor was specified. */ typedef DECLCALLBACK(int) FNDBGCCMD(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR pArgs, unsigned cArgs, PDBGCVAR pResult); /** Pointer to a FNDBGCCMD() function. */ typedef FNDBGCCMD *PFNDBGCCMD; /** * DBGC command descriptor. * * If a pResultDesc is specified the command can be called and used * as a function too. If it's a pure function, set fFlags to * DBGCCMD_FLAGS_FUNCTION. */ typedef struct DBGCCMD { /** Command string. */ const char *pszCmd; /** Minimum number of arguments. */ unsigned cArgsMin; /** Max number of arguments. */ unsigned cArgsMax; /** Argument descriptors (array). */ PCDBGCVARDESC paArgDescs; /** Number of argument descriptors. */ unsigned cArgDescs; /** Result descriptor. */ PCDBGCVARDESC pResultDesc; /** flags. (reserved for now) */ unsigned fFlags; /** Handler function. */ PFNDBGCCMD pfnHandler; /** Command syntax. */ const char *pszSyntax; /** Command description. */ const char *pszDescription; } DBGCCMD; /** DBGCCMD Flags. * @{ */ /** The description is of a pure function which cannot be invoked * as a command from the commandline. */ #define DBGCCMD_FLAGS_FUNCTION 1 /** @} */ /** Pointer to a DBGC backend. */ typedef struct DBGCBACK *PDBGCBACK; /** * Checks if there is input. * * @returns true if there is input ready. * @returns false if there not input ready. * @param pBack Pointer to the backend structure supplied by * the backend. The backend can use this to find * it's instance data. * @param cMillies Number of milliseconds to wait on input data. */ typedef DECLCALLBACK(bool) FNDBGCBACKINPUT(PDBGCBACK pBack, uint32_t cMillies); /** Pointer to a FNDBGCBACKINPUT() callback. */ typedef FNDBGCBACKINPUT *PFNDBGCBACKINPUT; /** * Read input. * * @returns VBox status code. * @param pBack Pointer to the backend structure supplied by * the backend. The backend can use this to find * it's instance data. * @param pvBuf Where to put the bytes we read. * @param cbBuf Maximum nymber of bytes to read. * @param pcbRead Where to store the number of bytes actually read. * If NULL the entire buffer must be filled for a * successful return. */ typedef DECLCALLBACK(int) FNDBGCBACKREAD(PDBGCBACK pBack, void *pvBuf, size_t cbBuf, size_t *pcbRead); /** Pointer to a FNDBGCBACKREAD() callback. */ typedef FNDBGCBACKREAD *PFNDBGCBACKREAD; /** * Write (output). * * @returns VBox status code. * @param pBack Pointer to the backend structure supplied by * the backend. The backend can use this to find * it's instance data. * @param pvBuf What to write. * @param cbBuf Number of bytes to write. * @param pcbWritten Where to store the number of bytes actually written. * If NULL the entire buffer must be successfully written. */ typedef DECLCALLBACK(int) FNDBGCBACKWRITE(PDBGCBACK pBack, const void *pvBuf, size_t cbBuf, size_t *pcbWritten); /** Pointer to a FNDBGCBACKWRITE() callback. */ typedef FNDBGCBACKWRITE *PFNDBGCBACKWRITE; /** * Ready / busy notification. * * @param pBack Pointer to the backend structure supplied by * the backend. The backend can use this to find * it's instance data. * @param fReady Whether it's ready (true) or busy (false). */ typedef DECLCALLBACK(void) FNDBGCBACKSETREADY(PDBGCBACK pBack, bool fReady); /** Pointer to a FNDBGCBACKSETREADY() callback. */ typedef FNDBGCBACKSETREADY *PFNDBGCBACKSETREADY; /** * The communication backend provides the console with a number of callbacks * which can be used */ typedef struct DBGCBACK { /** Check for input. */ PFNDBGCBACKINPUT pfnInput; /** Read input. */ PFNDBGCBACKREAD pfnRead; /** Write output. */ PFNDBGCBACKWRITE pfnWrite; /** Ready / busy notification. */ PFNDBGCBACKSETREADY pfnSetReady; } DBGCBACK; /** * Make a console instance. * * This will not return until either an 'exit' command is issued or a error code * indicating connection loss is encountered. * * @returns VINF_SUCCESS if console termination caused by the 'exit' command. * @returns The VBox status code causing the console termination. * * @param pVM VM Handle. * @param pBack Pointer to the backend structure. This must contain * a full set of function pointers to service the console. * @param fFlags Reserved, must be zero. * @remark A forced termination of the console is easiest done by forcing the * callbacks to return fatal failures. */ DBGDECL(int) DBGCCreate(PVM pVM, PDBGCBACK pBack, unsigned fFlags); /** * Register one or more external commands. * * @returns VBox status. * @param paCommands Pointer to an array of command descriptors. * The commands must be unique. It's not possible * to register the same commands more than once. * @param cCommands Number of commands. */ DBGDECL(int) DBGCRegisterCommands(PCDBGCCMD paCommands, unsigned cCommands); /** * Deregister one or more external commands previously registered by * DBGCRegisterCommands(). * * @returns VBox status. * @param paCommands Pointer to an array of command descriptors * as given to DBGCRegisterCommands(). * @param cCommands Number of commands. */ DBGDECL(int) DBGCDeregisterCommands(PCDBGCCMD paCommands, unsigned cCommands); /** * Spawns a new thread with a TCP based debugging console service. * * @returns VBox status. * @param pVM VM handle. * @param ppvData Where to store the pointer to instance data. */ DBGDECL(int) DBGCTcpCreate(PVM pVM, void **ppvUser); /** * Terminates any running TCP base debugger consolse service. * * @returns VBox status. * @param pVM VM handle. * @param pvData Instance data set by DBGCTcpCreate(). */ DBGDECL(int) DBGCTcpTerminate(PVM pVM, void *pvData); __END_DECLS #endif