1 | /* $Id: VMMDevTesting.h 69107 2017-10-17 10:53:48Z vboxsync $ */
|
---|
2 | /** @file
|
---|
3 | * VMMDev - Testing Extensions.
|
---|
4 | */
|
---|
5 |
|
---|
6 | /*
|
---|
7 | * Copyright (C) 2010-2017 Oracle Corporation
|
---|
8 | *
|
---|
9 | * This file is part of VirtualBox Open Source Edition (OSE), as
|
---|
10 | * available from http://www.virtualbox.org. This file is free software;
|
---|
11 | * you can redistribute it and/or modify it under the terms of the GNU
|
---|
12 | * General Public License (GPL) as published by the Free Software
|
---|
13 | * Foundation, in version 2 as it comes in the "COPYING" file of the
|
---|
14 | * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
|
---|
15 | * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
|
---|
16 | *
|
---|
17 | * The contents of this file may alternatively be used under the terms
|
---|
18 | * of the Common Development and Distribution License Version 1.0
|
---|
19 | * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
|
---|
20 | * VirtualBox OSE distribution, in which case the provisions of the
|
---|
21 | * CDDL are applicable instead of those of the GPL.
|
---|
22 | *
|
---|
23 | * You may elect to license modified versions of this file under the
|
---|
24 | * terms and conditions of either the GPL or the CDDL or both.
|
---|
25 | */
|
---|
26 |
|
---|
27 |
|
---|
28 | #ifndef ___VBox_VMMDevTesting_h
|
---|
29 | #define ___VBox_VMMDevTesting_h
|
---|
30 |
|
---|
31 | #include <VBox/types.h>
|
---|
32 |
|
---|
33 |
|
---|
34 | /** @defgroup grp_vmmdev_testing VMM Device Testing
|
---|
35 | * @ingroup grp_vmmdev
|
---|
36 | * @{
|
---|
37 | */
|
---|
38 |
|
---|
39 | /** The base address of the MMIO range used for testing.
|
---|
40 | * This is intentionally put at the 2nd page above 1M so that it can be
|
---|
41 | * accessed from both real (!A20) and protected mode. */
|
---|
42 | #define VMMDEV_TESTING_MMIO_BASE UINT32_C(0x00101000)
|
---|
43 | /** The size of the MMIO range used for testing. */
|
---|
44 | #define VMMDEV_TESTING_MMIO_SIZE UINT32_C(0x00001000)
|
---|
45 |
|
---|
46 | /** MMIO offset: The NOP register - 1248 RW. */
|
---|
47 | #define VMMDEV_TESTING_MMIO_OFF_NOP (0x000)
|
---|
48 | /** MMIO offset: The go-to-ring-3-NOP register - 1248 RW. */
|
---|
49 | #define VMMDEV_TESTING_MMIO_OFF_NOP_R3 (0x008)
|
---|
50 | /** MMIO offset: The readback registers - 64 bytes of read/write "memory". */
|
---|
51 | #define VMMDEV_TESTING_MMIO_OFF_READBACK (0x040)
|
---|
52 | /** MMIO offset: Readback register view that always goes to ring-3. */
|
---|
53 | #define VMMDEV_TESTING_MMIO_OFF_READBACK_R3 (0x080)
|
---|
54 | /** The size of the MMIO readback registers. */
|
---|
55 | #define VMMDEV_TESTING_READBACK_SIZE (0x40)
|
---|
56 |
|
---|
57 | /** Default address of VMMDEV_TESTING_MMIO_OFF_NOP. */
|
---|
58 | #define VMMDEV_TESTING_MMIO_NOP (VMMDEV_TESTING_MMIO_BASE + VMMDEV_TESTING_MMIO_OFF_NOP)
|
---|
59 | /** Default address of VMMDEV_TESTING_MMIO_OFF_NOP_R3. */
|
---|
60 | #define VMMDEV_TESTING_MMIO_NOP_R3 (VMMDEV_TESTING_MMIO_BASE + VMMDEV_TESTING_MMIO_OFF_NOP_R3)
|
---|
61 | /** Default address of VMMDEV_TESTING_MMIO_OFF_READBACK. */
|
---|
62 | #define VMMDEV_TESTING_MMIO_READBACK (VMMDEV_TESTING_MMIO_BASE + VMMDEV_TESTING_MMIO_OFF_READBACK)
|
---|
63 | /** Default address of VMMDEV_TESTING_MMIO_OFF_READBACK_R3. */
|
---|
64 | #define VMMDEV_TESTING_MMIO_READBACK_R3 (VMMDEV_TESTING_MMIO_BASE + VMMDEV_TESTING_MMIO_OFF_READBACK_R3)
|
---|
65 |
|
---|
66 | /** The real mode selector to use.
|
---|
67 | * @remarks Requires that the A20 gate is enabled. */
|
---|
68 | #define VMMDEV_TESTING_MMIO_RM_SEL 0xffff
|
---|
69 | /** Calculate the real mode offset of a MMIO register. */
|
---|
70 | #define VMMDEV_TESTING_MMIO_RM_OFF(val) ((val) - 0xffff0)
|
---|
71 | /** Calculate the real mode offset of a MMIO register offset. */
|
---|
72 | #define VMMDEV_TESTING_MMIO_RM_OFF2(off) ((off) + 16 + 0x1000)
|
---|
73 |
|
---|
74 | /** The base port of the I/O range used for testing. */
|
---|
75 | #define VMMDEV_TESTING_IOPORT_BASE 0x0510
|
---|
76 | /** The number of I/O ports reserved for testing. */
|
---|
77 | #define VMMDEV_TESTING_IOPORT_COUNT 0x0010
|
---|
78 | /** The NOP I/O port - 1,2,4 RW. */
|
---|
79 | #define VMMDEV_TESTING_IOPORT_NOP (VMMDEV_TESTING_IOPORT_BASE + 0)
|
---|
80 | /** The low nanosecond timestamp - 4 RO. */
|
---|
81 | #define VMMDEV_TESTING_IOPORT_TS_LOW (VMMDEV_TESTING_IOPORT_BASE + 1)
|
---|
82 | /** The high nanosecond timestamp - 4 RO. Read this after the low one! */
|
---|
83 | #define VMMDEV_TESTING_IOPORT_TS_HIGH (VMMDEV_TESTING_IOPORT_BASE + 2)
|
---|
84 | /** Command register usually used for preparing the data register - 4/2 WO. */
|
---|
85 | #define VMMDEV_TESTING_IOPORT_CMD (VMMDEV_TESTING_IOPORT_BASE + 3)
|
---|
86 | /** Data register which use depends on the current command - 1s, 4 WO. */
|
---|
87 | #define VMMDEV_TESTING_IOPORT_DATA (VMMDEV_TESTING_IOPORT_BASE + 4)
|
---|
88 | /** The go-to-ring-3-NOP I/O port - 1,2,4 RW. */
|
---|
89 | #define VMMDEV_TESTING_IOPORT_NOP_R3 (VMMDEV_TESTING_IOPORT_BASE + 5)
|
---|
90 |
|
---|
91 | /** @name Commands.
|
---|
92 | * @{ */
|
---|
93 | /** Initialize test, sending name (zero terminated string). (RTTestCreate) */
|
---|
94 | #define VMMDEV_TESTING_CMD_INIT UINT32_C(0xcab1e000)
|
---|
95 | /** Test done, sending 32-bit total error count with it. (RTTestSummaryAndDestroy) */
|
---|
96 | #define VMMDEV_TESTING_CMD_TERM UINT32_C(0xcab1e001)
|
---|
97 | /** Start a new sub-test, sending name (zero terminated string). (RTTestSub) */
|
---|
98 | #define VMMDEV_TESTING_CMD_SUB_NEW UINT32_C(0xcab1e002)
|
---|
99 | /** Sub-test is done, sending 32-bit error count for it. (RTTestDone) */
|
---|
100 | #define VMMDEV_TESTING_CMD_SUB_DONE UINT32_C(0xcab1e003)
|
---|
101 | /** Report a failure, sending reason (zero terminated string). (RTTestFailed) */
|
---|
102 | #define VMMDEV_TESTING_CMD_FAILED UINT32_C(0xcab1e004)
|
---|
103 | /** Report a value, sending the 64-bit value (2x4), the 32-bit unit (4), and
|
---|
104 | * finally the name (zero terminated string). (RTTestValue) */
|
---|
105 | #define VMMDEV_TESTING_CMD_VALUE UINT32_C(0xcab1e005)
|
---|
106 | /** Report a failure, sending reason (zero terminated string). (RTTestSkipped) */
|
---|
107 | #define VMMDEV_TESTING_CMD_SKIPPED UINT32_C(0xcab1e006)
|
---|
108 | /** Report a value found in a VMM register, sending a string on the form
|
---|
109 | * "value-name:register-name". */
|
---|
110 | #define VMMDEV_TESTING_CMD_VALUE_REG UINT32_C(0xcab1e007)
|
---|
111 | /** Print string, sending a string including newline. (RTTestPrintf) */
|
---|
112 | #define VMMDEV_TESTING_CMD_PRINT UINT32_C(0xcab1e008)
|
---|
113 |
|
---|
114 | /** The magic part of the command. */
|
---|
115 | #define VMMDEV_TESTING_CMD_MAGIC UINT32_C(0xcab1e000)
|
---|
116 | /** The magic part of the command. */
|
---|
117 | #define VMMDEV_TESTING_CMD_MAGIC_MASK UINT32_C(0xffffff00)
|
---|
118 | /** The magic high word automatically supplied to 16-bit CMD writes. */
|
---|
119 | #define VMMDEV_TESTING_CMD_MAGIC_HI_WORD UINT32_C(0xcab10000)
|
---|
120 | /** @} */
|
---|
121 |
|
---|
122 | /** @name Value units
|
---|
123 | * @{ */
|
---|
124 | #define VMMDEV_TESTING_UNIT_PCT UINT8_C(0x01) /**< Percentage. */
|
---|
125 | #define VMMDEV_TESTING_UNIT_BYTES UINT8_C(0x02) /**< Bytes. */
|
---|
126 | #define VMMDEV_TESTING_UNIT_BYTES_PER_SEC UINT8_C(0x03) /**< Bytes per second. */
|
---|
127 | #define VMMDEV_TESTING_UNIT_KILOBYTES UINT8_C(0x04) /**< Kilobytes. */
|
---|
128 | #define VMMDEV_TESTING_UNIT_KILOBYTES_PER_SEC UINT8_C(0x05) /**< Kilobytes per second. */
|
---|
129 | #define VMMDEV_TESTING_UNIT_MEGABYTES UINT8_C(0x06) /**< Megabytes. */
|
---|
130 | #define VMMDEV_TESTING_UNIT_MEGABYTES_PER_SEC UINT8_C(0x07) /**< Megabytes per second. */
|
---|
131 | #define VMMDEV_TESTING_UNIT_PACKETS UINT8_C(0x08) /**< Packets. */
|
---|
132 | #define VMMDEV_TESTING_UNIT_PACKETS_PER_SEC UINT8_C(0x09) /**< Packets per second. */
|
---|
133 | #define VMMDEV_TESTING_UNIT_FRAMES UINT8_C(0x0a) /**< Frames. */
|
---|
134 | #define VMMDEV_TESTING_UNIT_FRAMES_PER_SEC UINT8_C(0x0b) /**< Frames per second. */
|
---|
135 | #define VMMDEV_TESTING_UNIT_OCCURRENCES UINT8_C(0x0c) /**< Occurrences. */
|
---|
136 | #define VMMDEV_TESTING_UNIT_OCCURRENCES_PER_SEC UINT8_C(0x0d) /**< Occurrences per second. */
|
---|
137 | #define VMMDEV_TESTING_UNIT_CALLS UINT8_C(0x0e) /**< Calls. */
|
---|
138 | #define VMMDEV_TESTING_UNIT_CALLS_PER_SEC UINT8_C(0x0f) /**< Calls per second. */
|
---|
139 | #define VMMDEV_TESTING_UNIT_ROUND_TRIP UINT8_C(0x10) /**< Round trips. */
|
---|
140 | #define VMMDEV_TESTING_UNIT_SECS UINT8_C(0x11) /**< Seconds. */
|
---|
141 | #define VMMDEV_TESTING_UNIT_MS UINT8_C(0x12) /**< Milliseconds. */
|
---|
142 | #define VMMDEV_TESTING_UNIT_NS UINT8_C(0x13) /**< Nanoseconds. */
|
---|
143 | #define VMMDEV_TESTING_UNIT_NS_PER_CALL UINT8_C(0x14) /**< Nanoseconds per call. */
|
---|
144 | #define VMMDEV_TESTING_UNIT_NS_PER_FRAME UINT8_C(0x15) /**< Nanoseconds per frame. */
|
---|
145 | #define VMMDEV_TESTING_UNIT_NS_PER_OCCURRENCE UINT8_C(0x16) /**< Nanoseconds per occurrence. */
|
---|
146 | #define VMMDEV_TESTING_UNIT_NS_PER_PACKET UINT8_C(0x17) /**< Nanoseconds per frame. */
|
---|
147 | #define VMMDEV_TESTING_UNIT_NS_PER_ROUND_TRIP UINT8_C(0x18) /**< Nanoseconds per round trip. */
|
---|
148 | #define VMMDEV_TESTING_UNIT_INSTRS UINT8_C(0x19) /**< Instructions. */
|
---|
149 | #define VMMDEV_TESTING_UNIT_INSTRS_PER_SEC UINT8_C(0x1a) /**< Instructions per second. */
|
---|
150 | #define VMMDEV_TESTING_UNIT_NONE UINT8_C(0x1b) /**< No unit. */
|
---|
151 | /** @} */
|
---|
152 |
|
---|
153 |
|
---|
154 | /** What the NOP accesses returns. */
|
---|
155 | #define VMMDEV_TESTING_NOP_RET UINT32_C(0x64726962) /* bird */
|
---|
156 |
|
---|
157 | /** @} */
|
---|
158 |
|
---|
159 | #endif
|
---|
160 |
|
---|